[Cryptech Tech] testing builds

[Pavel Shatov]

15.04.2018 22:07, Michael пишет:
> As  many of you may know I recently joined Phil and Stuart at Diamond Key.
> 

Hi,

> I have been setting up my computer to have the capability to generate 
> builds of the various system components.
> 
> I installed arm-none-eabi-gcc from the xenial repository , it reports 
> version (15:4.9.3+svn231177-1) 4.9.3 20150529 (prerelease).
> 
> avr-gcc installed with version 4.9.2. Are these tool revs sufficient to 
> do builds for the Alpha?
> 
> I was able to install 14.7 of Xilinx ISE although the full tar link took 
> me to newer software. I was able to d/l the 4 part install files and get 
> it that way.
> 
> I am getting these messages from make when trying make firmware.
> 
> /./scripts/build-shadow-tree.py//
> //make -C build/core/platform/alpha/build//
> //make[1]: Entering directory 
> '/home/michael/Documents/dkey/alpha/build/core/platform/alpha/build'//
> //. /opt/Xilinx/14.7/ISE_DS/settings64.sh; xst  -ifn alpha_fmc.scr//
> ///bin/sh: 12: [: /bin/sh: unexpected operator//
> //. /opt/Xilinx/14.7/ISE_DS/common/.settings64.sh 
> /opt/Xilinx/14.7/ISE_DS/common//
> //. /opt/Xilinx/14.7/ISE_DS/EDK/.settings64.sh /opt/Xilinx/14.7/ISE_DS/EDK//
> //. /opt/Xilinx/14.7/ISE_DS/PlanAhead/.settings64.sh 
> /opt/Xilinx/14.7/ISE_DS/PlanAhead//
> //. /opt/Xilinx/14.7/ISE_DS/ISE/.settings64.sh /opt/Xilinx/14.7/ISE_DS/ISE//
> ///bin/sh: 1: xst: not found//
> //xilinx.mk:137: recipe for target 'alpha_fmc.ngc' failed//
> //make[1]: *** [alpha_fmc.ngc] Error 127//
> //make[1]: Leaving directory 
> '/home/michael/Documents/dkey/alpha/build/core/platform/alpha/build'//
> //Makefile:92: recipe for target 
> 'build/core/platform/alpha/build/alpha_fmc.bit' failed//
> //make: *** [build/core/platform/alpha/build/alpha_fmc.bit] Error 2
> 
> /I suspect this is a license issue, but please confirm.

Have you actually installed a license during the process? Xilinx offers 
a free license ("WebPACK"), that allows you to build for certain 
devices. As far as I remember, there's a link somewhere buried in 
xilinx.com, that allows you generate it. Our FPGA is the largest one, 
that is supported with a free license.

You problem doesn't look like a license issue to me, I think, the script 
that sets environmental variables for the build tools fails for some reason.


> Phil, I think this a commercial license. Is this something I need to get 
> in the short term.
> 
> -Michael
> //
> 
> 
> _______________________________________________
> Tech mailing list
> Tech at cryptech.is
> https://lists.cryptech.is/listinfo/tech
> 


-- 
With best regards,
Pavel Shatov