[Cryptech Tech] testing builds

[Michael]

As  many of you may know I recently joined Phil and Stuart at Diamond Key.

I have been setting up my computer to have the capability to generate 
builds of the various system components.

I installed arm-none-eabi-gcc from the xenial repository , it reports 
version (15:4.9.3+svn231177-1) 4.9.3 20150529 (prerelease).

avr-gcc installed with version 4.9.2. Are these tool revs sufficient to 
do builds for the Alpha?

I was able to install 14.7 of Xilinx ISE although the full tar link took 
me to newer software. I was able to d/l the 4 part install files and get 
it that way.

I am getting these messages from make when trying make firmware.

/./scripts/build-shadow-tree.py//
//make -C build/core/platform/alpha/build//
//make[1]: Entering directory 
'/home/michael/Documents/dkey/alpha/build/core/platform/alpha/build'//
//. /opt/Xilinx/14.7/ISE_DS/settings64.sh; xst  -ifn alpha_fmc.scr//
///bin/sh: 12: [: /bin/sh: unexpected operator//
//. /opt/Xilinx/14.7/ISE_DS/common/.settings64.sh 
/opt/Xilinx/14.7/ISE_DS/common//
//. /opt/Xilinx/14.7/ISE_DS/EDK/.settings64.sh /opt/Xilinx/14.7/ISE_DS/EDK//
//. /opt/Xilinx/14.7/ISE_DS/PlanAhead/.settings64.sh 
/opt/Xilinx/14.7/ISE_DS/PlanAhead//
//. /opt/Xilinx/14.7/ISE_DS/ISE/.settings64.sh /opt/Xilinx/14.7/ISE_DS/ISE//
///bin/sh: 1: xst: not found//
//xilinx.mk:137: recipe for target 'alpha_fmc.ngc' failed//
//make[1]: *** [alpha_fmc.ngc] Error 127//
//make[1]: Leaving directory 
'/home/michael/Documents/dkey/alpha/build/core/platform/alpha/build'//
//Makefile:92: recipe for target 
'build/core/platform/alpha/build/alpha_fmc.bit' failed//
//make: *** [build/core/platform/alpha/build/alpha_fmc.bit] Error 2

/I suspect this is a license issue, but please confirm.

Phil, I think this a commercial license. Is this something I need to get 
in the short term.

-Michael
//
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cryptech.is/archives/tech/attachments/20180415/9a42442f/attachment.html>