<html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body text="#000000" bgcolor="#FFFFFF"> As many of you may know I recently joined Phil and Stuart at Diamond Key. I have been setting up my computer to have the capability to generate builds of the various system components. I installed arm-none-eabi-gcc from the xenial repository , it reports version (15:4.9.3+svn231177-1) 4.9.3 20150529 (prerelease). avr-gcc installed with version 4.9.2. Are these tool revs sufficient to do builds for the Alpha? I was able to install 14.7 of Xilinx ISE although the full tar link took me to newer software. I was able to d/l the 4 part install files and get it that way. I am getting these messages from make when trying make firmware. ./scripts/build-shadow-tree.py make -C build/core/platform/alpha/build make[1]: Entering directory '/home/michael/Documents/dkey/alpha/build/core/platform/alpha/build' . /opt/Xilinx/14.7/ISE_DS/settings64.sh; xst -ifn alpha_fmc.scr /bin/sh: 12: [: /bin/sh: unexpected operator . /opt/Xilinx/14.7/ISE_DS/common/.settings64.sh /opt/Xilinx/14.7/ISE_DS/common . /opt/Xilinx/14.7/ISE_DS/EDK/.settings64.sh /opt/Xilinx/14.7/ISE_DS/EDK . /opt/Xilinx/14.7/ISE_DS/PlanAhead/.settings64.sh /opt/Xilinx/14.7/ISE_DS/PlanAhead . /opt/Xilinx/14.7/ISE_DS/ISE/.settings64.sh /opt/Xilinx/14.7/ISE_DS/ISE /bin/sh: 1: xst: not found xilinx.mk:137: recipe for target 'alpha_fmc.ngc' failed make[1]: *** [alpha_fmc.ngc] Error 127 make[1]: Leaving directory '/home/michael/Documents/dkey/alpha/build/core/platform/alpha/build' Makefile:92: recipe for target 'build/core/platform/alpha/build/alpha_fmc.bit' failed make: *** [build/core/platform/alpha/build/alpha_fmc.bit] Error 2 I suspect this is a license issue, but please confirm. Phil, I think this a commercial license. Is this something I need to get in the short term. -Michael </body> </html>