[Cryptech-Commits] [staging/core/cipher/chacha] 03/07: Adding testbenches for core and top.
git at cryptech.is
git at cryptech.is
Tue Mar 17 13:10:24 UTC 2015
This is an automated email from the git hooks/post-receive script.
paul at psgd.org pushed a commit to branch master
in repository staging/core/cipher/chacha.
commit b825de8c9c8711479c29cc42c9c86f2d33c60172
Author: Joachim Strömbergson <joachim at secworks.se>
Date: Wed Sep 3 15:51:17 2014 +0200
Adding testbenches for core and top.
---
src/tb/tb_chacha.v | 761 ++++++++++++++++++++++++++++++++++++++++++++++++
src/tb/tb_chacha_core.v | 689 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 1450 insertions(+)
diff --git a/src/tb/tb_chacha.v b/src/tb/tb_chacha.v
new file mode 100644
index 0000000..4322334
--- /dev/null
+++ b/src/tb/tb_chacha.v
@@ -0,0 +1,761 @@
+//======================================================================
+//
+// tb_chacha.v
+// -----------
+// Testbench for the Chacha top level wrapper.
+//
+//
+// Author: Joachim Strombergson
+// Copyright (c) 2011, NORDUnet A/S All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+// - Redistributions of source code must retain the above copyright notice,
+// this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in the
+// documentation and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may
+// be used to endorse or promote products derived from this software
+// without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+//======================================================================
+
+//------------------------------------------------------------------
+// Simulator directives.
+//------------------------------------------------------------------
+`timescale 1ns/100ps
+
+module tb_chacha();
+
+ //----------------------------------------------------------------
+ // Internal constant and parameter definitions.
+ //----------------------------------------------------------------
+ parameter DEBUG = 0;
+
+ parameter CLK_HALF_PERIOD = 2;
+
+ parameter TC1 = 1;
+ parameter TC2 = 2;
+ parameter TC3 = 3;
+ parameter TC4 = 4;
+ parameter TC5 = 5;
+ parameter TC6 = 6;
+ parameter TC7 = 7;
+ parameter TC8 = 8;
+ parameter TC9 = 9;
+ parameter TC10 = 10;
+
+ parameter ONE = 1;
+ parameter TWO = 2;
+ parameter THREE = 3;
+ parameter FOUR = 4;
+ parameter FIVE = 5;
+ parameter SIX = 6;
+ parameter SEVEN = 7;
+ parameter EIGHT = 8;
+
+ parameter KEY_128_BITS = 0;
+ parameter KEY_256_BITS = 1;
+
+ parameter EIGHT_ROUNDS = 8;
+ parameter TWELWE_ROUNDS = 12;
+ parameter TWENTY_ROUNDS = 20;
+
+ parameter DISABLE = 0;
+ parameter ENABLE = 1;
+
+ // API for the dut.
+ parameter ADDR_CTRL = 8'h00;
+ parameter CTRL_INIT_BIT = 0;
+ parameter CTRL_NEXT_BIT = 1;
+
+ parameter ADDR_STATUS = 8'h01;
+ parameter STATUS_READY_BIT = 0;
+
+ parameter ADDR_KEYLEN = 8'h08;
+ parameter KEYLEN_BIT = 0;
+ parameter ADDR_ROUNDS = 8'h09;
+ parameter ROUNDS_HIGH_BIT = 4;
+ parameter ROUNDS_LOW_BIT = 0;
+
+ parameter ADDR_KEY0 = 8'h10;
+ parameter ADDR_KEY1 = 8'h11;
+ parameter ADDR_KEY2 = 8'h12;
+ parameter ADDR_KEY3 = 8'h13;
+ parameter ADDR_KEY4 = 8'h14;
+ parameter ADDR_KEY5 = 8'h15;
+ parameter ADDR_KEY6 = 8'h16;
+ parameter ADDR_KEY7 = 8'h17;
+
+ parameter ADDR_IV0 = 8'h20;
+ parameter ADDR_IV1 = 8'h21;
+
+ parameter ADDR_DATA_IN0 = 8'h40;
+ parameter ADDR_DATA_IN1 = 8'h41;
+ parameter ADDR_DATA_IN2 = 8'h42;
+ parameter ADDR_DATA_IN3 = 8'h43;
+ parameter ADDR_DATA_IN4 = 8'h44;
+ parameter ADDR_DATA_IN5 = 8'h45;
+ parameter ADDR_DATA_IN6 = 8'h46;
+ parameter ADDR_DATA_IN7 = 8'h47;
+ parameter ADDR_DATA_IN8 = 8'h48;
+ parameter ADDR_DATA_IN9 = 8'h49;
+ parameter ADDR_DATA_IN10 = 8'h4a;
+ parameter ADDR_DATA_IN11 = 8'h4b;
+ parameter ADDR_DATA_IN12 = 8'h4c;
+ parameter ADDR_DATA_IN13 = 8'h4d;
+ parameter ADDR_DATA_IN14 = 8'h4e;
+ parameter ADDR_DATA_IN15 = 8'h4f;
+
+ parameter ADDR_DATA_OUT0 = 8'h80;
+ parameter ADDR_DATA_OUT1 = 8'h81;
+ parameter ADDR_DATA_OUT2 = 8'h82;
+ parameter ADDR_DATA_OUT3 = 8'h83;
+ parameter ADDR_DATA_OUT4 = 8'h84;
+ parameter ADDR_DATA_OUT5 = 8'h85;
+ parameter ADDR_DATA_OUT6 = 8'h86;
+ parameter ADDR_DATA_OUT7 = 8'h87;
+ parameter ADDR_DATA_OUT8 = 8'h88;
+ parameter ADDR_DATA_OUT9 = 8'h89;
+ parameter ADDR_DATA_OUT10 = 8'h8a;
+ parameter ADDR_DATA_OUT11 = 8'h8b;
+ parameter ADDR_DATA_OUT12 = 8'h8c;
+ parameter ADDR_DATA_OUT13 = 8'h8d;
+ parameter ADDR_DATA_OUT14 = 8'h8e;
+ parameter ADDR_DATA_OUT15 = 8'h8f;
+
+
+ //----------------------------------------------------------------
+ // Register and Wire declarations.
+ //----------------------------------------------------------------
+ reg tb_clk;
+ reg tb_reset_n;
+
+ reg tb_cs;
+ reg tb_write_read;
+
+ reg [7 : 0] tb_address;
+ reg [31 : 0] tb_data_in;
+ wire [31 : 0] tb_data_out;
+ wire tb_error;
+
+ reg [63 : 0] cycle_ctr;
+ reg [31 : 0] error_ctr;
+ reg [31 : 0] tc_ctr;
+
+ reg error_found;
+ reg [31 : 0] read_data;
+
+ reg [511 : 0] extracted_data;
+
+ reg display_cycle_ctr;
+ reg display_read_write;
+
+
+ //----------------------------------------------------------------
+ // Chacha device under test.
+ //----------------------------------------------------------------
+ chacha dut(
+ // Clock and reset.
+ .clk(tb_clk),
+ .reset_n(tb_reset_n),
+
+ // Control.
+ .cs(tb_cs),
+ .we(tb_write_read),
+
+ // Data ports.
+ .address(tb_address),
+ .write_data(tb_data_in),
+ .read_data(tb_data_out),
+ .error(tb_error)
+ );
+
+
+ //----------------------------------------------------------------
+ // clk_gen
+ //
+ // Clock generator process.
+ //----------------------------------------------------------------
+ always
+ begin : clk_gen
+ #CLK_HALF_PERIOD tb_clk = !tb_clk;
+ end // clk_gen
+
+
+ //--------------------------------------------------------------------
+ // dut_monitor
+ //
+ // Monitor displaying information every cycle.
+ // Includes the cycle counter.
+ //--------------------------------------------------------------------
+ always @ (posedge tb_clk)
+ begin : dut_monitor
+ cycle_ctr = cycle_ctr + 1;
+
+ if (display_cycle_ctr)
+ begin
+ $display("cycle = %016x:", cycle_ctr);
+ end
+
+ if (display_read_write)
+ begin
+
+ if (dut.cs)
+ begin
+ if (dut.we)
+ begin
+ $display("*** Write acess: addr 0x%02x = 0x%08x", dut.address, dut.write_data);
+ end
+ else
+ begin
+ $display("*** Read acess: addr 0x%02x = 0x%08x", dut.address, dut.read_data);
+ end
+ end
+ end
+
+ end // dut_monitor
+
+
+ //----------------------------------------------------------------
+ // set_display_prefs()
+ //
+ // Set the different monitor displays we want to see during
+ // simulation.
+ //----------------------------------------------------------------
+ task set_display_prefs(
+ input cycles,
+ input read_write);
+ begin
+ display_cycle_ctr = cycles;
+ display_read_write = read_write;
+ end
+ endtask // set_display_prefs
+
+
+ //----------------------------------------------------------------
+ // reset_dut
+ //----------------------------------------------------------------
+ task reset_dut();
+ begin
+ tb_reset_n = 0;
+ #(4 * CLK_HALF_PERIOD);
+ tb_reset_n = 1;
+ end
+ endtask // reset_dut
+
+
+ //----------------------------------------------------------------
+ // read_reg
+ //
+ // Task that reads and display the value of
+ // a register in the dut.
+ //----------------------------------------------------------------
+ task read_reg(input [7 : 0] addr);
+ begin
+ tb_cs = 1;
+ tb_write_read = 0;
+ tb_address = addr;
+ #(2 * CLK_HALF_PERIOD);
+ tb_cs = 0;
+ tb_write_read = 0;
+ tb_address = 8'h00;
+ tb_data_in = 32'h00000000;
+ end
+ endtask // read_reg
+
+
+ //----------------------------------------------------------------
+ // write_reg
+ //
+ // Task that writes to a register in the dut.
+ //----------------------------------------------------------------
+ task write_reg(input [7 : 0] addr, input [31 : 0] data);
+ begin
+ tb_cs = 1;
+ tb_write_read = 1;
+ tb_address = addr;
+ tb_data_in = data;
+ #(2 * CLK_HALF_PERIOD);
+ tb_cs = 0;
+ tb_write_read = 0;
+ tb_address = 8'h00;
+ tb_data_in = 32'h00000000;
+ end
+ endtask // write_reg
+
+
+ //----------------------------------------------------------------
+ // dump_top_state
+ //
+ // Dump the internal state of the top to std out.
+ //----------------------------------------------------------------
+ task dump_top_state();
+ begin
+ $display("");
+ $display("Top internal state");
+ $display("------------------");
+ $display("init_reg = %01x", dut.init_reg);
+ $display("next_reg = %01x", dut.next_reg);
+ $display("ready_reg = %01x", dut.ready_reg);
+ $display("keylen_reg = %01x", dut.keylen_reg);
+ $display("rounds_reg = %01x", dut.rounds_reg);
+ $display("");
+
+ $display("key0_reg = %08x, key1_reg = %08x, key2_reg = %08x, key3_reg = %08x", dut.key0_reg, dut.key1_reg, dut.key2_reg, dut.key3_reg);
+ $display("key4_reg = %08x, key5_reg = %08x, key6_reg = %08x, key7_reg = %08x", dut.key4_reg, dut.key5_reg, dut.key6_reg, dut.key7_reg);
+ $display("");
+
+ $display("iv0_reg = %08x, iv1_reg = %08x", dut.iv0_reg, dut.iv1_reg);
+ $display("");
+
+ $display("data_in0_reg = %08x, data_in1_reg = %08x, data_in2_reg = %08x, data_in3_reg = %08x", dut.data_in0_reg, dut.data_in1_reg, dut.data_in2_reg, dut.data_in3_reg);
+ $display("data_in4_reg = %08x, data_in5_reg = %08x, data_in6_reg = %08x, data_in7_reg = %08x", dut.data_in4_reg, dut.data_in5_reg, dut.data_in6_reg, dut.data_in7_reg);
+ $display("data_in8_reg = %08x, data_in9_reg = %08x, data_in10_reg = %08x, data_in11_reg = %08x", dut.data_in8_reg, dut.data_in9_reg, dut.data_in10_reg, dut.data_in11_reg);
+ $display("data_in12_reg = %08x, data_in13_reg = %08x, data_in14_reg = %08x, data_in15_reg = %08x", dut.data_in12_reg, dut.data_in13_reg, dut.data_in14_reg, dut.data_in15_reg);
+ $display("");
+
+ $display("data_out_valid_reg = %01x", dut.data_out_valid_reg);
+ $display("data_out0_reg = %08x, data_out1_reg = %08x, data_out2_reg = %08x, data_out3_reg = %08x", dut.data_out0_reg, dut.data_out1_reg, dut.data_out2_reg, dut.data_out3_reg);
+ $display("data_out4_reg = %08x, data_out5_reg = %08x, data_out6_reg = %08x, data_out7_reg = %08x", dut.data_out4_reg, dut.data_out5_reg, dut.data_out6_reg, dut.data_out7_reg);
+ $display("data_out8_reg = %08x, data_out9_reg = %08x, data_out10_reg = %08x, data_out11_reg = %08x", dut.data_out8_reg, dut.data_out9_reg, dut.data_out10_reg, dut.data_out11_reg);
+ $display("data_out12_reg = %08x, data_out13_reg = %08x, data_out14_reg = %08x, data_out15_reg = %08x", dut.data_out12_reg, dut.data_out13_reg, dut.data_out14_reg, dut.data_out15_reg);
+ $display("");
+ end
+ endtask // dump_top_state
+
+
+ //----------------------------------------------------------------
+ // dump_core_state
+ //
+ // Dump the internal state of the core to std out.
+ //----------------------------------------------------------------
+ task dump_core_state();
+ begin
+ $display("");
+ $display("Core internal state");
+ $display("-------------------");
+// $display("Internal data state vector:");
+// $display("0x%064x", dut.core.state_reg);
+ $display("");
+
+ $display("Round state X:");
+ $display("x0_reg = %08x, x1_reg = %08x", dut.core.x0_reg, dut.core.x1_reg);
+ $display("x2_reg = %08x, x3_reg = %08x", dut.core.x2_reg, dut.core.x3_reg);
+ $display("x4_reg = %08x, x5_reg = %08x", dut.core.x4_reg, dut.core.x5_reg);
+ $display("x6_reg = %08x, x7_reg = %08x", dut.core.x6_reg, dut.core.x7_reg);
+ $display("x8_reg = %08x, x9_reg = %08x", dut.core.x8_reg, dut.core.x9_reg);
+ $display("x10_reg = %08x, x11_reg = %08x", dut.core.x10_reg, dut.core.x11_reg);
+ $display("x12_reg = %08x, x13_reg = %08x", dut.core.x12_reg, dut.core.x13_reg);
+ $display("x14_reg = %08x, x15_reg = %08x", dut.core.x14_reg, dut.core.x15_reg);
+ $display("");
+
+ $display("rounds_reg = %01x", dut.core.rounds_reg);
+ $display("qr_ctr_reg = %01x, dr_ctr_reg = %01x", dut.core.qr_ctr_reg, dut.core.dr_ctr_reg);
+ $display("block0_ctr_reg = %08x, block1_ctr_reg = %08x", dut.core.block0_ctr_reg, dut.core.block1_ctr_reg);
+
+ $display("");
+
+ $display("chacha_ctrl_reg = %02x", dut.core.chacha_ctrl_reg);
+ $display("");
+
+ $display("data_in_reg = %064x", dut.core.data_in_reg);
+ $display("data_out_valid_reg = %01x", dut.core.data_out_valid_reg);
+ $display("");
+
+ $display("qr0_a_prim = %08x, qr0_b_prim = %08x", dut.core.qr0_a_prim, dut.core.qr0_b_prim);
+ $display("qr0_c_prim = %08x, qr0_d_prim = %08x", dut.core.qr0_c_prim, dut.core.qr0_d_prim);
+ $display("");
+ end
+ endtask // dump_core_state
+
+
+ //----------------------------------------------------------------
+ // display_test_result()
+ //
+ // Display the accumulated test results.
+ //----------------------------------------------------------------
+ task display_test_result();
+ begin
+ if (error_ctr == 0)
+ begin
+ $display("*** All %02d test cases completed successfully", tc_ctr);
+ end
+ else
+ begin
+ $display("*** %02d test cases did not complete successfully.", error_ctr);
+ end
+ end
+ endtask // display_test_result
+
+
+ //----------------------------------------------------------------
+ // init_dut()
+ //
+ // Set the input to the DUT to defined values.
+ //----------------------------------------------------------------
+ task init_dut();
+ begin
+ // Set clock, reset and DUT input signals to
+ // defined values at simulation start.
+ cycle_ctr = 0;
+ error_ctr = 0;
+ tc_ctr = 0;
+ tb_clk = 0;
+ tb_reset_n = 0;
+ tb_cs = 0;
+ tb_write_read = 0;
+ tb_address = 8'h00;
+ tb_data_in = 32'h00000000;
+ end
+ endtask // init_dut
+
+
+ //----------------------------------------------------------------
+ // read_write_test()
+ //
+ // Simple test case that tries to read and write to the
+ // registers in the dut.
+ //
+ // Note: Currently not self testing. No expected values.
+ //----------------------------------------------------------------
+ task read_write_test();
+ begin
+ tc_ctr = tc_ctr + 1;
+
+ write_reg(ADDR_KEY0, 32'h55555555);
+ read_reg(ADDR_KEY0);
+ write_reg(ADDR_KEY1, 32'haaaaaaaa);
+ read_reg(ADDR_KEY1);
+ read_reg(ADDR_CTRL);
+ read_reg(ADDR_STATUS);
+ read_reg(ADDR_KEYLEN);
+ read_reg(ADDR_ROUNDS);
+
+ read_reg(ADDR_KEY0);
+ read_reg(ADDR_KEY1);
+ read_reg(ADDR_KEY2);
+ read_reg(ADDR_KEY3);
+ read_reg(ADDR_KEY4);
+ read_reg(ADDR_KEY5);
+ read_reg(ADDR_KEY6);
+ read_reg(ADDR_KEY7);
+ end
+ endtask // read_write_test
+
+
+ //----------------------------------------------------------------
+ // write_parameters()
+ //
+ // Write key, iv and other parameters to the dut.
+ //----------------------------------------------------------------
+ task write_parameters(input [256 : 0] key,
+ input key_length,
+ input [64 : 0] iv,
+ input [4 : 0] rounds);
+ begin
+ write_reg(ADDR_KEY0, key[255 : 224]);
+ write_reg(ADDR_KEY1, key[223 : 192]);
+ write_reg(ADDR_KEY2, key[191 : 160]);
+ write_reg(ADDR_KEY3, key[159 : 128]);
+ write_reg(ADDR_KEY4, key[127 : 96]);
+ write_reg(ADDR_KEY5, key[95 : 64]);
+ write_reg(ADDR_KEY6, key[63 : 32]);
+ write_reg(ADDR_KEY7, key[31 : 0]);
+ write_reg(ADDR_IV0, iv[63 : 32]);
+ write_reg(ADDR_IV1, iv[31 : 0]);
+ write_reg(ADDR_KEYLEN, {{31'b0000000000000000000000000000000}, key_length});
+ write_reg(ADDR_ROUNDS, {{27'b000000000000000000000000000}, rounds});
+ end
+ endtask // write_parameters
+
+
+ //----------------------------------------------------------------
+ // start_init_block()
+ //
+ // Toggle the init signal in the dut to make it start processing
+ // the first block available in the data in registers.
+ //
+ // Note: It is the callers responsibility to call the function
+ // when the dut is ready to react on the init signal.
+ //----------------------------------------------------------------
+ task start_init_block();
+ begin
+ write_reg(ADDR_CTRL, 32'h00000001);
+ #(4 * CLK_HALF_PERIOD);
+ write_reg(ADDR_CTRL, 32'h00000000);
+ end
+ endtask // start_init_block
+
+
+ //----------------------------------------------------------------
+ // start_next_block()
+ //
+ // Toggle the next signal in the dut to make it start processing
+ // the next block available in the data in registers.
+ //
+ // Note: It is the callers responsibility to call the function
+ // when the dut is ready to react on the next signal.
+ //----------------------------------------------------------------
+ task start_next_block();
+ begin
+ write_reg(ADDR_CTRL, 32'h00000002);
+ #(4 * CLK_HALF_PERIOD);
+ write_reg(ADDR_CTRL, 32'h00000000);
+
+ if (DEBUG)
+ begin
+ $display("Debug of next state.");
+ dump_core_state();
+ #(4 * CLK_HALF_PERIOD);
+ dump_core_state();
+ end
+ end
+ endtask // start_next_block
+
+
+ //----------------------------------------------------------------
+ // wait_ready()
+ //
+ // Wait for the ready flag in the dut to be set.
+ //
+ // Note: It is the callers responsibility to call the function
+ // when the dut is actively processing and will in fact at some
+ // point set the flag.
+ //----------------------------------------------------------------
+ task wait_ready();
+ begin
+ while (!tb_data_out[STATUS_READY_BIT])
+ begin
+ read_reg(ADDR_STATUS);
+ end
+ end
+ endtask // wait_ready
+
+
+ //----------------------------------------------------------------
+ // extract_data()
+ //
+ // Extracts all 16 data out words and combine them into the
+ // global extracted_data.
+ //----------------------------------------------------------------
+ task extract_data();
+ begin
+ read_reg(ADDR_DATA_OUT0);
+ extracted_data[511 : 480] = tb_data_out;
+ read_reg(ADDR_DATA_OUT1);
+ extracted_data[479 : 448] = tb_data_out;
+ read_reg(ADDR_DATA_OUT2);
+ extracted_data[447 : 416] = tb_data_out;
+ read_reg(ADDR_DATA_OUT3);
+ extracted_data[415 : 384] = tb_data_out;
+ read_reg(ADDR_DATA_OUT4);
+ extracted_data[383 : 352] = tb_data_out;
+ read_reg(ADDR_DATA_OUT5);
+ extracted_data[351 : 320] = tb_data_out;
+ read_reg(ADDR_DATA_OUT6);
+ extracted_data[319 : 288] = tb_data_out;
+ read_reg(ADDR_DATA_OUT7);
+ extracted_data[287 : 256] = tb_data_out;
+ read_reg(ADDR_DATA_OUT8);
+ extracted_data[255 : 224] = tb_data_out;
+ read_reg(ADDR_DATA_OUT9);
+ extracted_data[223 : 192] = tb_data_out;
+ read_reg(ADDR_DATA_OUT10);
+ extracted_data[191 : 160] = tb_data_out;
+ read_reg(ADDR_DATA_OUT11);
+ extracted_data[159 : 128] = tb_data_out;
+ read_reg(ADDR_DATA_OUT12);
+ extracted_data[127 : 96] = tb_data_out;
+ read_reg(ADDR_DATA_OUT13);
+ extracted_data[95 : 64] = tb_data_out;
+ read_reg(ADDR_DATA_OUT14);
+ extracted_data[63 : 32] = tb_data_out;
+ read_reg(ADDR_DATA_OUT15);
+ extracted_data[31 : 0] = tb_data_out;
+ end
+ endtask // extract_data
+
+
+ //----------------------------------------------------------------
+ // run_two_blocks_test_vector()
+ //
+ // Runs a test case with two blocks based on the given
+ // test vector. Only the final block is compared.
+ //----------------------------------------------------------------
+ task run_two_blocks_test_vector(input [7 : 0] major,
+ input [7 : 0] minor,
+ input [256 : 0] key,
+ input key_length,
+ input [64 : 0] iv,
+ input [4 : 0] rounds,
+ input [511 : 0] expected);
+ begin
+ tc_ctr = tc_ctr + 1;
+
+ $display("***TC%2d-%2d started", major, minor);
+ $display("***-----------------");
+ write_parameters(key, key_length, iv, rounds);
+
+ start_init_block();
+ wait_ready();
+ extract_data();
+
+ if (DEBUG)
+ begin
+ $display("State after first block:");
+ dump_core_state();
+
+ $display("First block:");
+ $display("0x%064x", extracted_data);
+ end
+
+ start_next_block();
+
+ if (DEBUG)
+ begin
+ $display("State after init of second block:");
+ dump_core_state();
+ end
+
+ wait_ready();
+ extract_data();
+
+ if (DEBUG)
+ begin
+ $display("State after init of second block:");
+ dump_core_state();
+
+ $display("Second block:");
+ $display("0x%064x", extracted_data);
+ end
+
+ if (extracted_data != expected)
+ begin
+ error_ctr = error_ctr + 1;
+ $display("***TC%2d-%2d - ERROR", major, minor);
+ $display("***-----------------");
+ $display("Expected:");
+ $display("0x%064x", expected);
+ $display("Got:");
+ $display("0x%064x", extracted_data);
+ end
+ else
+ begin
+ $display("***TC%2d-%2d - SUCCESS", major, minor);
+ $display("***-------------------");
+ end
+ $display("");
+ end
+ endtask // run_two_blocks_test_vector
+
+
+ //----------------------------------------------------------------
+ // run_test_vector()
+ //
+ // Runs a test case based on the given test vector.
+ //----------------------------------------------------------------
+ task run_test_vector(input [7 : 0] major,
+ input [7 : 0] minor,
+ input [256 : 0] key,
+ input key_length,
+ input [64 : 0] iv,
+ input [4 : 0] rounds,
+ input [511 : 0] expected);
+ begin
+ tc_ctr = tc_ctr + 1;
+
+ $display("***TC%2d-%2d started", major, minor);
+ $display("***-----------------");
+ write_parameters(key, key_length, iv, rounds);
+
+ start_init_block();
+ wait_ready();
+ extract_data();
+
+ if (extracted_data != expected)
+ begin
+ error_ctr = error_ctr + 1;
+ $display("***TC%2d-%2d - ERROR", major, minor);
+ $display("***-----------------");
+ $display("Expected:");
+ $display("0x%064x", expected);
+ $display("Got:");
+ $display("0x%064x", extracted_data);
+ end
+ else
+ begin
+ $display("***TC%2d-%2d - SUCCESS", major, minor);
+ $display("***-------------------");
+ end
+ $display("");
+ end
+ endtask // run_test_vector
+
+
+ //----------------------------------------------------------------
+ // chacha_test
+ // The main test functionality.
+ //----------------------------------------------------------------
+ initial
+ begin : chacha_test
+ $display(" -- Testbench for chacha started --");
+ init_dut();
+ set_display_prefs(0, 0);
+ reset_dut();
+
+ $display("State at init after reset:");
+ dump_top_state();
+
+ $display("TC1-1: All zero inputs. 128 bit key, 8 rounds.");
+ run_test_vector(TC1, ONE,
+ 256'h0000000000000000000000000000000000000000000000000000000000000000,
+ KEY_128_BITS,
+ 64'h0000000000000000,
+ EIGHT_ROUNDS,
+ 512'he28a5fa4a67f8c5defed3e6fb7303486aa8427d31419a729572d777953491120b64ab8e72b8deb85cd6aea7cb6089a101824beeb08814a428aab1fa2c816081b);
+
+ $display("TC7-2: Increasing, decreasing sequences in key and IV. 256 bit key, 8 rounds.");
+ run_test_vector(TC7, TWO,
+ 256'h00112233445566778899aabbccddeeffffeeddccbbaa99887766554433221100,
+ KEY_256_BITS,
+ 64'h0f1e2d3c4b596877,
+ EIGHT_ROUNDS,
+ 512'h60fdedbd1a280cb741d0593b6ea0309010acf18e1471f68968f4c9e311dca149b8e027b47c81e0353db013891aa5f68ea3b13dd2f3b8dd0873bf3746e7d6c567);
+
+
+ $display("TC7-3: Increasing, decreasing sequences in key and IV. 256 bit key, 8 rounds.");
+ $display("TC7-3: Testing correct second block.");
+ run_two_blocks_test_vector(TC7, THREE,
+ 256'h00112233445566778899aabbccddeeffffeeddccbbaa99887766554433221100,
+ KEY_256_BITS,
+ 64'h0f1e2d3c4b596877,
+ EIGHT_ROUNDS,
+ 512'hfe882395601ce8aded444867fe62ed8741420002e5d28bb573113a418c1f4008e954c188f38ec4f26bb8555e2b7c92bf4380e2ea9e553187fdd42821794416de);
+
+
+ display_test_result();
+ $display("*** chacha simulation done.");
+ $finish;
+ end // chacha_test
+endmodule // tb_chacha
+
+//======================================================================
+// EOF tb_chacha.v
+//======================================================================
diff --git a/src/tb/tb_chacha_core.v b/src/tb/tb_chacha_core.v
new file mode 100644
index 0000000..a1ddfdc
--- /dev/null
+++ b/src/tb/tb_chacha_core.v
@@ -0,0 +1,689 @@
+//======================================================================
+//
+// tb_chacha_core.v
+// -----------------
+// Testbench for the Chacha stream cipher core.
+//
+//
+// Author: Joachim Strombergson
+// Copyright (c) 2011, NORDUnet A/S All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+// - Redistributions of source code must retain the above copyright notice,
+// this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in the
+// documentation and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may
+// be used to endorse or promote products derived from this software
+// without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+//======================================================================
+
+//------------------------------------------------------------------
+// Simulator directives.
+//------------------------------------------------------------------
+`timescale 1ns/100ps
+
+module tb_chacha_core();
+
+ //----------------------------------------------------------------
+ // Internal constant and parameter definitions.
+ //----------------------------------------------------------------
+ parameter CLK_HALF_PERIOD = 2;
+
+ parameter TC1 = 1;
+ parameter TC2 = 2;
+ parameter TC3 = 3;
+ parameter TC4 = 4;
+ parameter TC5 = 5;
+ parameter TC6 = 6;
+ parameter TC7 = 7;
+ parameter TC8 = 8;
+ parameter TC9 = 9;
+ parameter TC10 = 10;
+
+ parameter ONE = 1;
+ parameter TWO = 2;
+ parameter THREE = 3;
+ parameter FOUR = 4;
+ parameter FIVE = 5;
+ parameter SIX = 6;
+ parameter SEVEN = 7;
+ parameter EIGHT = 8;
+
+ parameter KEY_128_BITS = 0;
+ parameter KEY_256_BITS = 1;
+
+ parameter EIGHT_ROUNDS = 8;
+ parameter TWELWE_ROUNDS = 12;
+ parameter TWENTY_ROUNDS = 20;
+
+ parameter DISABLE = 0;
+ parameter ENABLE = 1;
+
+ parameter DEFAULT_CTR_INIT = 64'h0000000000000000;
+
+
+ //----------------------------------------------------------------
+ // Register and Wire declarations.
+ //----------------------------------------------------------------
+ reg [31 : 0] cycle_ctr;
+ reg [31 : 0] error_ctr;
+ reg [31 : 0] tc_ctr;
+
+ reg tb_clk;
+ reg tb_reset_n;
+
+ reg tb_core_init;
+ reg tb_core_next;
+ reg [255 : 0] tb_core_key;
+ reg tb_core_keylen;
+ reg [4 : 0] tb_core_rounds;
+ reg [63 : 0] tb_core_iv;
+ wire tb_core_ready;
+ reg [0 : 511] tb_core_data_in;
+ wire [0 : 511] tb_core_data_out;
+
+ reg display_cycle_ctr;
+ reg display_ctrl_and_ctrs;
+ reg display_qround;
+ reg display_state;
+ reg display_x_state;
+
+
+ //----------------------------------------------------------------
+ // chacha_core device under test.
+ //----------------------------------------------------------------
+ chacha_core dut(
+ // Clock and reset.
+ .clk(tb_clk),
+ .reset_n(tb_reset_n),
+
+ // Control.
+ .init(tb_core_init),
+ .next(tb_core_next),
+
+ // Parameters.
+ .key(tb_core_key),
+ .keylen(tb_core_keylen),
+ .iv(tb_core_iv),
+ .ctr(DEFAULT_CTR_INIT),
+ .rounds(tb_core_rounds),
+
+ // Data input.
+ .data_in(tb_core_data_in),
+
+ // Status output.
+ .ready(tb_core_ready),
+
+ // Data out with valid signal.
+ .data_out(tb_core_data_out),
+ .data_out_valid(tb_core_data_out_valid)
+ );
+
+
+ //----------------------------------------------------------------
+ // clk_gen
+ //
+ // Clock generator process.
+ //----------------------------------------------------------------
+ always
+ begin : clk_gen
+ #CLK_HALF_PERIOD tb_clk = !tb_clk;
+ end // clk_gen
+
+
+ //--------------------------------------------------------------------
+ // dut_monitor
+ //
+ // Monitor that displays different types of information
+ // every cycle depending on what flags test cases enable.
+ //
+ // The monitor includes a cycle counter for the testbench.
+ //--------------------------------------------------------------------
+ always @ (posedge tb_clk)
+ begin : dut_monitor
+ cycle_ctr = cycle_ctr + 1;
+
+ // Display cycle counter.
+ if (display_cycle_ctr)
+ begin
+ $display("cycle = %08x:", cycle_ctr);
+ $display("");
+ end
+
+ // Display FSM control state and QR, DR counters.
+ if (display_ctrl_and_ctrs)
+ begin
+ $display("chacha_ctrl_reg = %01x", dut.chacha_ctrl_reg);
+ $display("qr_ctr_reg = %01x, dr_ctr_reg = %01x", dut.qr_ctr_reg, dut.dr_ctr_reg);
+ $display("");
+ end
+
+ // Display the internal state register.
+ if (display_state)
+ begin
+// $display("Internal state:");
+// $display("0x%064x", dut.state_reg);
+// $display("");
+ end
+
+ // Display the round processing state register X.
+ if (display_x_state)
+ begin
+ $display("Round state X:");
+ $display("x0_reg = 0x%08x, x0_new = 0x%08x, x0_we = 0x%01x", dut.x0_reg, dut.x0_new, dut.x0_we);
+ $display("x1_reg = 0x%08x, x1_new = 0x%08x, x1_we = 0x%01x", dut.x1_reg, dut.x1_new, dut.x1_we);
+ $display("x2_reg = 0x%08x, x2_new = 0x%08x, x2_we = 0x%01x", dut.x2_reg, dut.x2_new, dut.x2_we);
+ $display("x3_reg = 0x%08x, x3_new = 0x%08x, x3_we = 0x%01x", dut.x3_reg, dut.x3_new, dut.x3_we);
+ $display("x4_reg = 0x%08x, x4_new = 0x%08x, x4_we = 0x%01x", dut.x4_reg, dut.x4_new, dut.x4_we);
+ $display("x5_reg = 0x%08x, x5_new = 0x%08x, x5_we = 0x%01x", dut.x5_reg, dut.x5_new, dut.x5_we);
+ $display("x6_reg = 0x%08x, x6_new = 0x%08x, x6_we = 0x%01x", dut.x6_reg, dut.x6_new, dut.x6_we);
+ $display("x7_reg = 0x%08x, x7_new = 0x%08x, x7_we = 0x%01x", dut.x7_reg, dut.x7_new, dut.x7_we);
+ $display("x8_reg = 0x%08x, x8_new = 0x%08x, x8_we = 0x%01x", dut.x8_reg, dut.x8_new, dut.x8_we);
+ $display("x9_reg = 0x%08x, x9_new = 0x%08x, x9_we = 0x%01x", dut.x9_reg, dut.x9_new, dut.x9_we);
+ $display("x10_reg = 0x%08x, x10_new = 0x%08x, x10_we = 0x%01x", dut.x10_reg, dut.x10_new, dut.x10_we);
+ $display("x11_reg = 0x%08x, x11_new = 0x%08x, x11_we = 0x%01x", dut.x11_reg, dut.x11_new, dut.x11_we);
+ $display("x12_reg = 0x%08x, x12_new = 0x%08x, x12_we = 0x%01x", dut.x12_reg, dut.x12_new, dut.x12_we);
+ $display("x13_reg = 0x%08x, x13_new = 0x%08x, x13_we = 0x%01x", dut.x13_reg, dut.x13_new, dut.x13_we);
+ $display("x14_reg = 0x%08x, x14_new = 0x%08x, x14_we = 0x%01x", dut.x14_reg, dut.x14_new, dut.x14_we);
+ $display("x15_reg = 0x%08x, x15_new = 0x%08x, x15_we = 0x%01x", dut.x15_reg, dut.x15_new, dut.x15_we);
+ $display("");
+ end
+
+ // Display the qround input and outputs.
+ if (display_qround)
+ begin
+ $display("a = %08x, b = %08x, c = %08x, d = %08x", dut.qr0_a, dut.qr0_b, dut.qr0_c, dut.qr0_d);
+ $display("qr0_a_prim = %08x, qr0_b_prim = %08x, qr0_c_prim = %08x, qr0_d_prim = %08x", dut.qr0_a_prim, dut.qr0_b_prim, dut.qr0_c_prim, dut.qr0_d_prim);
+ $display("");
+ end
+
+ end // dut_monitor
+
+
+ //----------------------------------------------------------------
+ // dump_state()
+ // Dump the internal CHACHA state to std out.
+ //----------------------------------------------------------------
+ task dump_state();
+ begin
+ $display("");
+ $display("Internal state:");
+ $display("---------------");
+// $display("0x%064x", dut.state_reg);
+// $display("");
+
+ $display("Round state X::");
+ $display("x0_reg = %08x, x1_reg = %08x", dut.x0_reg, dut.x1_reg);
+ $display("x2_reg = %08x, x3_reg = %08x", dut.x2_reg, dut.x3_reg);
+ $display("x4_reg = %08x, x5_reg = %08x", dut.x4_reg, dut.x5_reg);
+ $display("x6_reg = %08x, x7_reg = %08x", dut.x6_reg, dut.x7_reg);
+ $display("x8_reg = %08x, x9_reg = %08x", dut.x8_reg, dut.x9_reg);
+ $display("x10_reg = %08x, x11_reg = %08x", dut.x10_reg, dut.x11_reg);
+ $display("x12_reg = %08x, x13_reg = %08x", dut.x12_reg, dut.x13_reg);
+ $display("x14_reg = %08x, x15_reg = %08x", dut.x14_reg, dut.x15_reg);
+ $display("");
+
+ $display("rounds_reg = %01x", dut.rounds_reg);
+ $display("qr_ctr_reg = %01x, dr_ctr_reg = %01x", dut.qr_ctr_reg, dut.dr_ctr_reg);
+ $display("block0_ctr_reg = %08x, block1_ctr_reg = %08x", dut.block0_ctr_reg, dut.block1_ctr_reg);
+
+ $display("");
+
+ $display("chacha_ctrl_reg = %02x", dut.chacha_ctrl_reg);
+ $display("");
+
+ $display("data_in_reg = %064x", dut.data_in_reg);
+ $display("data_out_valid_reg = %01x", dut.data_out_valid_reg);
+ $display("");
+
+ $display("qr0_a_prim = %08x, qr0_b_prim = %08x", dut.qr0_a_prim, dut.qr0_b_prim);
+ $display("qr0_c_prim = %08x, qr0_d_prim = %08x", dut.qr0_c_prim, dut.qr0_d_prim);
+ $display("");
+ end
+ endtask // dump_state
+
+
+ //----------------------------------------------------------------
+ // dump_inout()
+ // Dump the status for input and output ports.
+ //----------------------------------------------------------------
+ task dump_inout();
+ begin
+ $display("");
+ $display("State for input and output ports:");
+ $display("---------------------------------");
+
+ $display("init = %01x", dut.init);
+ $display("next = %01x", dut.next);
+ $display("keylen = %01x", dut.keylen);
+ $display("");
+
+ $display("key = %032x", dut.key);
+ $display("iv = %016x", dut.iv);
+ $display("");
+
+ $display("ready = %01x", dut.ready);
+ $display("data_in = %064x", dut.data_in);
+ $display("data_out = %064x", dut.data_out);
+ $display("data_out_valid = %01x", dut.data_out_valid);
+ $display("");
+ end
+ endtask // dump_inout
+
+
+ //----------------------------------------------------------------
+ // test_quarterround()
+ //
+ // Test the quarterround by forcing the inputs of the logic
+ // to known given values and observing the result.
+ //----------------------------------------------------------------
+ task test_quarterround(input [31 : 0] a, input [31 : 0] b,
+ input [31 : 0] c, input [31 : 0] d);
+ begin
+ $display("Test of quarterround.");
+ $display("a = 0x%08x, b = 0x%08x", a, b);
+ $display("c = 0x%08x, d = 0x%08x", c, d);
+ $display("");
+
+ dut.qr0_a = a;
+ dut.qr0_b = b;
+ dut.qr0_c = c;
+ dut.qr0_d = d;
+ #(2 * CLK_HALF_PERIOD);
+
+ $display("a0 = 0x%08x, a1 = 0x%08x", dut.qr0.qr.a0, dut.qr0.qr.a1);
+ $display("b0 = 0x%08x, b1 = 0x%08x", dut.qr0.qr.b0, dut.qr0.qr.b1);
+ $display("b2 = 0x%08x, b3 = 0x%08x", dut.qr0.qr.b2, dut.qr0.qr.b3);
+ $display("c0 = 0x%08x, c1 = 0x%08x", dut.qr0.qr.c0, dut.qr0.qr.c1);
+ $display("d0 = 0x%08x, d1 = 0x%08x", dut.qr0.qr.d0, dut.qr0.qr.d1);
+ $display("d2 = 0x%08x, d3 = 0x%08x", dut.qr0.qr.d2, dut.qr0.qr.d3);
+ $display("");
+
+ $display("a_prim = 0x%08x, b_prim = 0x%08x", dut.qr0_a_prim, dut.qr0_b_prim);
+ $display("c_prim = 0x%08x, d_prim = 0x%08x", dut.qr0_c_prim, dut.qr0_d_prim);
+ $display("");
+ end
+ endtask // test_quarterround
+
+
+ //----------------------------------------------------------------
+ // qr_tests()
+ //
+ // Run some simple test on the qr logic.
+ // Note: Not self testing. No expected value used.
+ //----------------------------------------------------------------
+ task qr_tests();
+ begin
+ $display("*** Test of Quarterround:");
+ $display("");
+ test_quarterround(32'h11223344, 32'h11223344, 32'h11223344, 32'h11223344);
+ test_quarterround(32'h55555555, 32'h55555555, 32'h55555555, 32'h55555555);
+ end
+ endtask // qr_tests
+
+
+ //----------------------------------------------------------------
+ // set_core_init()
+ //
+ // Set core init flag to given value.
+ //----------------------------------------------------------------
+ task set_core_init(input value);
+ begin
+ tb_core_init = value;
+ end
+ endtask // set_core_init
+
+
+ //----------------------------------------------------------------
+ // set_core_next()
+ //
+ // Set code next flag to given value.
+ //----------------------------------------------------------------
+ task set_core_next(input value);
+ begin
+ tb_core_next = value;
+ end
+ endtask // set_core_next
+
+
+ //----------------------------------------------------------------
+ // set_core_key_iv_rounds()
+ //
+ // Sets the core key, iv and rounds indata ports
+ // to the given values.
+ //----------------------------------------------------------------
+ task set_core_key_iv_rounds(input [255 : 0] key,
+ input key_length,
+ input [63 : 0] iv,
+ input [4 : 0] rounds);
+ begin
+ tb_core_key = key;
+ tb_core_keylen = key_length;
+ tb_core_iv = iv;
+ tb_core_rounds = rounds;
+ end
+ endtask // set_core_key_iv
+
+
+ //----------------------------------------------------------------
+ // cycle_reset()
+ //
+ // Cycles the reset signal on the dut.
+ //----------------------------------------------------------------
+ task cycle_reset();
+ begin
+ tb_reset_n = 0;
+ #(2 * CLK_HALF_PERIOD);
+
+ @(negedge tb_clk)
+
+ tb_reset_n = 1;
+ #(2 * CLK_HALF_PERIOD);
+ end
+ endtask // cycle_reset
+
+
+ //----------------------------------------------------------------
+ // run_test_case
+ //
+ // Runs a test case based on the given key, keylenght, IV and
+ // expected data out from the DUT.
+ //----------------------------------------------------------------
+ task run_test_case(input [7 : 0] major,
+ input [7 : 0] minor,
+ input [255 : 0] key,
+ input key_length,
+ input [63 : 0] iv,
+ input [4 : 0] rounds,
+ input [511 : 0] expected);
+ begin
+ $display("*** TC %0d-%0d started.", major, minor);
+ $display("");
+
+ tc_ctr = tc_ctr + 1;
+
+ cycle_reset();
+ set_core_key_iv_rounds(key, key_length, iv, rounds);
+ set_core_init(1);
+
+ #(2 * CLK_HALF_PERIOD);
+ set_core_init(0);
+ dump_state();
+
+ // Wait for valid flag and check results.
+ @(posedge dut.data_out_valid);
+ dump_state();
+
+ if (tb_core_data_out == expected)
+ begin
+ $display("*** TC %0d-%0d successful", major, minor);
+ $display("");
+ end
+ else
+ begin
+ $display("*** ERROR: TC %0d-%0d not successful", major, minor);
+ $display("Expected: 0x%064x", expected);
+ $display("Got: 0x%064x", tb_core_data_out);
+ $display("");
+
+ error_ctr = error_ctr + 1;
+ end
+ end
+ endtask // run_test_case
+
+
+ //----------------------------------------------------------------
+ // display_test_result()
+ //
+ // Display the accumulated test results.
+ //----------------------------------------------------------------
+ task display_test_result();
+ begin
+ if (error_ctr == 0)
+ begin
+ $display("*** All %d test cases completed successfully", tc_ctr);
+ end
+ else
+ begin
+ $display("*** %02d test cases did not complete successfully.", error_ctr);
+ end
+ end
+ endtask // display_test_result
+
+
+ //----------------------------------------------------------------
+ // init_dut()
+ //
+ // Set the input to the DUT to defined values.
+ //----------------------------------------------------------------
+ task init_dut();
+ begin
+ cycle_ctr = 0;
+ tb_clk = 0;
+ tb_reset_n = 0;
+ error_ctr = 0;
+ tc_ctr = 0;
+ set_core_key_iv_rounds(256'h0000000000000001000000000000000100000000000000010000000000000001,
+ 1'b0,
+ 64'h0000000000000001,
+ 5'b01000);
+
+ tb_core_init = 0;
+ tb_core_next = 0;
+ tb_core_data_in = 512'h00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000;
+ end
+ endtask // init_dut
+
+
+ //----------------------------------------------------------------
+ // set_display_prefs()
+ //
+ // Set the different monitor displays we want to see during
+ // simulation.
+ //----------------------------------------------------------------
+ task set_display_prefs(
+ input cycles,
+ input ctrl_ctr,
+ input state,
+ input x_state,
+ input qround);
+ begin
+ display_cycle_ctr = cycles;
+ display_ctrl_and_ctrs = ctrl_ctr;
+ display_state = state;
+ display_x_state = x_state;
+ display_qround = qround;
+ end
+ endtask // set_display_prefs
+
+
+ //----------------------------------------------------------------
+ // chacha_core_test
+ //
+ // The main test functionality.
+ //----------------------------------------------------------------
+ initial
+ begin : chacha_core_test
+ $display(" -- Testbench for chacha_core started --");
+ $display("");
+
+ set_display_prefs(0, 0, 1, 1, 0);
+ qr_tests();
+ init_dut();
+ $display("*** State at init:");
+ $display("");
+ dump_state();
+
+ #(4 * CLK_HALF_PERIOD);
+ @(negedge tb_clk)
+ tb_reset_n = 1;
+ #(2 * CLK_HALF_PERIOD);
+ $display("*** State after release of reset:");
+ $display("");
+ dump_state();
+
+ $display("TC1-1: All zero inputs. 128 bit key, 8 rounds.");
+ run_test_case(TC1, ONE,
+ 256'h0000000000000000000000000000000000000000000000000000000000000000,
+ KEY_128_BITS,
+ 64'h0000000000000000,
+ EIGHT_ROUNDS,
+ 512'he28a5fa4a67f8c5defed3e6fb7303486aa8427d31419a729572d777953491120b64ab8e72b8deb85cd6aea7cb6089a101824beeb08814a428aab1fa2c816081b);
+
+
+ $display("TC1-2: All zero inputs. 128 bit key, 12 rounds.");
+ run_test_case(TC1, TWO,
+ 256'h0000000000000000000000000000000000000000000000000000000000000000,
+ KEY_128_BITS,
+ 64'h0000000000000000,
+ TWELWE_ROUNDS,
+ 512'he1047ba9476bf8ff312c01b4345a7d8ca5792b0ad467313f1dc412b5fdce32410dea8b68bd774c36a920f092a04d3f95274fbeff97bc8491fcef37f85970b450);
+
+
+ $display("TC1-3: All zero inputs. 128 bit key, 20 rounds.");
+ run_test_case(TC1, THREE,
+ 256'h0000000000000000000000000000000000000000000000000000000000000000,
+ KEY_128_BITS,
+ 64'h0000000000000000,
+ TWENTY_ROUNDS,
+ 512'h89670952608364fd00b2f90936f031c8e756e15dba04b8493d00429259b20f46cc04f111246b6c2ce066be3bfb32d9aa0fddfbc12123d4b9e44f34dca05a103f);
+
+
+ $display("TC1-4: All zero inputs. 256 bit key, 8 rounds.");
+ run_test_case(TC1, FOUR,
+ 256'h0000000000000000000000000000000000000000000000000000000000000000,
+ KEY_256_BITS,
+ 64'h0000000000000000,
+ EIGHT_ROUNDS,
+ 512'h3e00ef2f895f40d67f5bb8e81f09a5a12c840ec3ce9a7f3b181be188ef711a1e984ce172b9216f419f445367456d5619314a42a3da86b001387bfdb80e0cfe42);
+
+
+ $display("TC1-5: All zero inputs. 256 bit key, 12 rounds.");
+ run_test_case(TC1, FIVE,
+ 256'h0000000000000000000000000000000000000000000000000000000000000000,
+ KEY_256_BITS,
+ 64'h0000000000000000,
+ TWELWE_ROUNDS,
+ 512'h9bf49a6a0755f953811fce125f2683d50429c3bb49e074147e0089a52eae155f0564f879d27ae3c02ce82834acfa8c793a629f2ca0de6919610be82f411326be);
+
+
+ $display("TC1-6: All zero inputs. 256 bit key, 20 rounds.");
+ run_test_case(TC1, SIX,
+ 256'h0000000000000000000000000000000000000000000000000000000000000000,
+ KEY_256_BITS,
+ 64'h0000000000000000,
+ TWENTY_ROUNDS,
+ 512'h76b8e0ada0f13d90405d6ae55386bd28bdd219b8a08ded1aa836efcc8b770dc7da41597c5157488d7724e03fb8d84a376a43b8f41518a11cc387b669b2ee6586);
+
+
+ $display("TC2-1: One bit in key set, all zero IV. 128 bit key, 8 rounds.");
+ run_test_case(TC2, ONE,
+ 256'h0100000000000000000000000000000000000000000000000000000000000000,
+ KEY_128_BITS,
+ 64'h0000000000000000,
+ EIGHT_ROUNDS,
+ 512'h03a7669888605a0765e8357475e58673f94fc8161da76c2a3aa2f3caf9fe5449e0fcf38eb882656af83d430d410927d55c972ac4c92ab9da3713e19f761eaa14);
+
+
+ $display("TC2-2: One bit in key set, all zero IV. 256 bit key, 8 rounds.");
+ run_test_case(TC2, ONE,
+ 256'h0100000000000000000000000000000000000000000000000000000000000000,
+ KEY_256_BITS,
+ 64'h0000000000000000,
+ EIGHT_ROUNDS,
+ 512'hcf5ee9a0494aa9613e05d5ed725b804b12f4a465ee635acc3a311de8740489ea289d04f43c7518db56eb4433e498a1238cd8464d3763ddbb9222ee3bd8fae3c8);
+
+
+ $display("TC3-1: All zero key, one bit in IV set. 128 bit key, 8 rounds.");
+ run_test_case(TC3, ONE,
+ 256'h0000000000000000000000000000000000000000000000000000000000000000,
+ KEY_128_BITS,
+ 64'h0100000000000000,
+ EIGHT_ROUNDS,
+ 512'h25f5bec6683916ff44bccd12d102e692176663f4cac53e719509ca74b6b2eec85da4236fb29902012adc8f0d86c8187d25cd1c486966930d0204c4ee88a6ab35);
+
+
+ $display("TC4-1: All bits in key and IV are set. 128 bit key, 8 rounds.");
+ run_test_case(TC4, ONE,
+ 256'hffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff,
+ KEY_128_BITS,
+ 64'hffffffffffffffff,
+ EIGHT_ROUNDS,
+ 512'h2204d5b81ce662193e00966034f91302f14a3fb047f58b6e6ef0d721132304163e0fb640d76ff9c3b9cd99996e6e38fad13f0e31c82244d33abbc1b11e8bf12d);
+
+
+ $display("TC5-1: Even bits in key, IV are set. 128 bit key, 8 rounds.");
+ run_test_case(TC5, ONE,
+ 256'h5555555555555555555555555555555555555555555555555555555555555555,
+ KEY_128_BITS,
+ 64'h5555555555555555,
+ EIGHT_ROUNDS,
+ 512'hf0a23bc36270e18ed0691dc384374b9b2c5cb60110a03f56fa48a9fbbad961aa6bab4d892e96261b6f1a0919514ae56f86e066e17c71a4176ac684af1c931996);
+
+
+ $display("TC6-1: Odd bits in key, IV are set. 128 bit key, 8 rounds.");
+ run_test_case(TC6, ONE,
+ 256'haaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa,
+ KEY_128_BITS,
+ 64'haaaaaaaaaaaaaaaa,
+ EIGHT_ROUNDS,
+ 512'h312d95c0bc38eff4942db2d50bdc500a30641ef7132db1a8ae838b3bea3a7ab03815d7a4cc09dbf5882a3433d743aced48136ebab73299506855c0f5437a36c6);
+
+
+ $display("TC7-1: Increasing, decreasing sequences in key and IV. 128 bit key, 8 rounds");
+ run_test_case(TC7, ONE,
+ 256'h00112233445566778899aabbccddeeff00000000000000000000000000000000,
+ KEY_128_BITS,
+ 64'h0f1e2d3c4b596877,
+ EIGHT_ROUNDS,
+ 512'ha7a6c81bd8ac106e8f3a46a1bc8ec702e95d18c7e0f424519aeafb54471d83a2bf888861586b73d228eaaf82f9665a5a155e867f93731bfbe24fab495590b231);
+
+
+ $display("TC7-2: Increasing, decreasing sequences in key and IV. 256 bit key, 8 rounds.");
+ run_test_case(TC7, TWO,
+ 256'h00112233445566778899aabbccddeeffffeeddccbbaa99887766554433221100,
+ KEY_256_BITS,
+ 64'h0f1e2d3c4b596877,
+ EIGHT_ROUNDS,
+ 512'h60fdedbd1a280cb741d0593b6ea0309010acf18e1471f68968f4c9e311dca149b8e027b47c81e0353db013891aa5f68ea3b13dd2f3b8dd0873bf3746e7d6c567);
+
+
+ $display("TC8-128-8: Random inputs. 128 bit key, 8 rounds.");
+ run_test_case(TC8, ONE,
+ 256'hc46ec1b18ce8a878725a37e780dfb73500000000000000000000000000000000,
+ KEY_128_BITS,
+ 64'h1ada31d5cf688221,
+ EIGHT_ROUNDS,
+ 512'h6a870108859f679118f3e205e2a56a6826ef5a60a4102ac8d4770059fcb7c7bae02f5ce004a6bfbbea53014dd82107c0aa1c7ce11b7d78f2d50bd3602bbd2594);
+
+
+ // Finish in style.
+ $display("*** chacha_core simulation done ***");
+ display_test_result();
+ $finish;
+ end // chacha_core_test
+
+endmodule // tb_chacha_core
+
+//======================================================================
+// EOF tb_chacha_core.v
+//======================================================================
More information about the Commits
mailing list