[Cryptech-Commits] [core/sha256] 01/01: Removed the wishbone wrapper we don't use.
git at cryptech.is
git at cryptech.is
Wed Mar 11 09:30:54 UTC 2015
This is an automated email from the git hooks/post-receive script.
joachim at secworks.se pushed a commit to branch master
in repository core/sha256.
commit 4b24edfbf02277a70c5e46ace62941fba4130216
Author: Joachim Strömbergson <joachim at secworks.se>
Date: Wed Mar 11 10:30:50 2015 +0100
Removed the wishbone wrapper we don't use.
---
src/rtl/wb_sha256.v | 674 ----------------------------------------------------
1 file changed, 674 deletions(-)
diff --git a/src/rtl/wb_sha256.v b/src/rtl/wb_sha256.v
deleted file mode 100644
index 024d0b9..0000000
--- a/src/rtl/wb_sha256.v
+++ /dev/null
@@ -1,674 +0,0 @@
-//======================================================================
-//
-// wb_sha256.v
-// -----------
-// Wisbone compliant top level wrapper for the SHA-256 hash core.
-//
-//
-// Author: Joachim Strombergson
-// Copyright (c) 2014 SUNET
-//
-// Redistribution and use in source and binary forms, with or
-// without modification, are permitted provided that the following
-// conditions are met:
-//
-// 1. Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//
-// 2. Redistributions in binary form must reproduce the above copyright
-// notice, this list of conditions and the following disclaimer in
-// the documentation and/or other materials provided with the
-// distribution.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-module wb_sha256(
- // Clock and reset.
- input wire CLK_I,
- input wire RST_I,
-
- // Control and status.
- input wire STB_I,
- input wire WE_I,
- output wire ACK_O,
- output wire ERR_O,
-
- // Address and data.
- input wire [7 : 0] ADR_I,
- input wire [31 : 0] DAT_I,
- output wire [31 : 0] DAT_O
- );
-
-
- //----------------------------------------------------------------
- // Internal constant and parameter definitions.
- //----------------------------------------------------------------
- parameter ADDR_NAME0 = 8'h00;
- parameter ADDR_NAME1 = 8'h01;
- parameter ADDR_VERSION = 8'h02;
-
- parameter ADDR_CTRL = 8'h08;
- parameter CTRL_INIT_BIT = 0;
- parameter CTRL_INIT_VALUE = 8'h01;
- parameter CTRL_NEXT_BIT = 1;
- parameter CTRL_NEXT_VALUE = 8'h02;
-
- parameter ADDR_STATUS = 8'h09;
- parameter STATUS_READY_BIT = 0;
- parameter STATUS_VALID_BIT = 1;
-
- parameter ADDR_BLOCK0 = 8'h10;
- parameter ADDR_BLOCK1 = 8'h11;
- parameter ADDR_BLOCK2 = 8'h12;
- parameter ADDR_BLOCK3 = 8'h13;
- parameter ADDR_BLOCK4 = 8'h14;
- parameter ADDR_BLOCK5 = 8'h15;
- parameter ADDR_BLOCK6 = 8'h16;
- parameter ADDR_BLOCK7 = 8'h17;
- parameter ADDR_BLOCK8 = 8'h18;
- parameter ADDR_BLOCK9 = 8'h19;
- parameter ADDR_BLOCK10 = 8'h1a;
- parameter ADDR_BLOCK11 = 8'h1b;
- parameter ADDR_BLOCK12 = 8'h1c;
- parameter ADDR_BLOCK13 = 8'h1d;
- parameter ADDR_BLOCK14 = 8'h1e;
- parameter ADDR_BLOCK15 = 8'h1f;
-
- parameter ADDR_DIGEST0 = 8'h20;
- parameter ADDR_DIGEST1 = 8'h21;
- parameter ADDR_DIGEST2 = 8'h22;
- parameter ADDR_DIGEST3 = 8'h23;
- parameter ADDR_DIGEST4 = 8'h24;
- parameter ADDR_DIGEST5 = 8'h25;
- parameter ADDR_DIGEST6 = 8'h26;
- parameter ADDR_DIGEST7 = 8'h27;
-
- parameter CORE_NAME0 = 32'h73686132; // "sha2"
- parameter CORE_NAME1 = 32'h2d323536; // "-256"
- parameter CORE_VERSION = 32'h302e3830; // "0.80"
-
-
- //----------------------------------------------------------------
- // Registers including update variables and write enable.
- //----------------------------------------------------------------
- reg init_reg;
- reg next_reg;
- reg ctrl_we;
-
- reg ready_reg;
-
- reg [31 : 0] block0_reg;
- reg block0_we;
- reg [31 : 0] block1_reg;
- reg block1_we;
- reg [31 : 0] block2_reg;
- reg block2_we;
- reg [31 : 0] block3_reg;
- reg block3_we;
- reg [31 : 0] block4_reg;
- reg block4_we;
- reg [31 : 0] block5_reg;
- reg block5_we;
- reg [31 : 0] block6_reg;
- reg block6_we;
- reg [31 : 0] block7_reg;
- reg block7_we;
- reg [31 : 0] block8_reg;
- reg block8_we;
- reg [31 : 0] block9_reg;
- reg block9_we;
- reg [31 : 0] block10_reg;
- reg block10_we;
- reg [31 : 0] block11_reg;
- reg block11_we;
- reg [31 : 0] block12_reg;
- reg block12_we;
- reg [31 : 0] block13_reg;
- reg block13_we;
- reg [31 : 0] block14_reg;
- reg block14_we;
- reg [31 : 0] block15_reg;
- reg block15_we;
-
- reg [255 : 0] digest_reg;
-
- reg digest_valid_reg;
-
-
- //----------------------------------------------------------------
- // Wires.
- //----------------------------------------------------------------
- wire core_init;
- wire core_next;
- wire core_ready;
- wire [511 : 0] core_block;
- wire [255 : 0] core_digest;
- wire core_digest_valid;
-
- reg [31 : 0] tmp_data_out;
- reg tmp_ACK_O;
- reg tmp_ERR_O;
-
- wire reset_n;
-
-
- //----------------------------------------------------------------
- // Concurrent connectivity for ports etc.
- //----------------------------------------------------------------
- assign core_init = init_reg;
-
- assign core_next = next_reg;
-
- assign core_block = {block0_reg, block1_reg, block2_reg, block3_reg,
- block4_reg, block5_reg, block6_reg, block7_reg,
- block8_reg, block9_reg, block10_reg, block11_reg,
- block12_reg, block13_reg, block14_reg, block15_reg};
-
- assign DAT_O = tmp_data_out;
-
- assign ACK_O = tmp_ACK_O;
- assign ERR_O = tmp_ERR_O;
-
- assign reset_n = ~RST_I;
-
-
- //----------------------------------------------------------------
- // core instantiation.
- //----------------------------------------------------------------
- sha256_core core(
- .clk(CLK_I),
- .reset_n(reset_n),
-
- .init(core_init),
- .next(core_next),
-
- .block(core_block),
-
- .ready(core_ready),
-
- .digest(core_digest),
- .digest_valid(core_digest_valid)
- );
-
-
- //----------------------------------------------------------------
- // reg_update
- //
- // Update functionality for all registers in the core.
- // All registers are positive edge triggered with synchronous
- // active low reset. All registers have write enable.
- //----------------------------------------------------------------
- always @ (posedge CLK_I)
- begin
- if (!reset_n)
- begin
- init_reg <= 0;
- next_reg <= 0;
- ready_reg <= 0;
- digest_reg <= 256'h0000000000000000000000000000000000000000000000000000000000000000;
- digest_valid_reg <= 0;
- block0_reg <= 32'h00000000;
- block1_reg <= 32'h00000000;
- block2_reg <= 32'h00000000;
- block3_reg <= 32'h00000000;
- block4_reg <= 32'h00000000;
- block5_reg <= 32'h00000000;
- block6_reg <= 32'h00000000;
- block7_reg <= 32'h00000000;
- block8_reg <= 32'h00000000;
- block9_reg <= 32'h00000000;
- block10_reg <= 32'h00000000;
- block11_reg <= 32'h00000000;
- block12_reg <= 32'h00000000;
- block13_reg <= 32'h00000000;
- block14_reg <= 32'h00000000;
- block15_reg <= 32'h00000000;
- end
- else
- begin
- ready_reg <= core_ready;
- digest_valid_reg <= core_digest_valid;
-
- if (ctrl_we)
- begin
- init_reg <= DAT_I[CTRL_INIT_BIT];
- next_reg <= DAT_I[CTRL_NEXT_BIT];
- end
-
- if (core_digest_valid)
- begin
- digest_reg <= core_digest;
- end
-
- if (block0_we)
- begin
- block0_reg <= DAT_I;
- end
-
- if (block1_we)
- begin
- block1_reg <= DAT_I;
- end
-
- if (block2_we)
- begin
- block2_reg <= DAT_I;
- end
-
- if (block3_we)
- begin
- block3_reg <= DAT_I;
- end
-
- if (block4_we)
- begin
- block4_reg <= DAT_I;
- end
-
- if (block5_we)
- begin
- block5_reg <= DAT_I;
- end
-
- if (block6_we)
- begin
- block6_reg <= DAT_I;
- end
-
- if (block7_we)
- begin
- block7_reg <= DAT_I;
- end
-
- if (block8_we)
- begin
- block8_reg <= DAT_I;
- end
-
- if (block9_we)
- begin
- block9_reg <= DAT_I;
- end
-
- if (block10_we)
- begin
- block10_reg <= DAT_I;
- end
-
- if (block11_we)
- begin
- block11_reg <= DAT_I;
- end
-
- if (block12_we)
- begin
- block12_reg <= DAT_I;
- end
-
- if (block13_we)
- begin
- block13_reg <= DAT_I;
- end
-
- if (block14_we)
- begin
- block14_reg <= DAT_I;
- end
-
- if (block15_we)
- begin
- block15_reg <= DAT_I;
- end
-
- end
- end // reg_update
-
-
- //----------------------------------------------------------------
- // addr_decoder
- //
- // IF SEL_I is enabled will either try to write to or read
- // from the internal registers.
- //----------------------------------------------------------------
- always @*
- begin : addr_decoder
- ctrl_we = 0;
- block0_we = 0;
- block1_we = 0;
- block2_we = 0;
- block3_we = 0;
- block4_we = 0;
- block5_we = 0;
- block6_we = 0;
- block7_we = 0;
- block8_we = 0;
- block9_we = 0;
- block10_we = 0;
- block11_we = 0;
- block12_we = 0;
- block13_we = 0;
- block14_we = 0;
- block15_we = 0;
- tmp_data_out = 32'h00000000;
- tmp_ERR_O = 0;
- tmp_ACK_O = 0;
-
- if (STB_I)
- begin
- if (WE_I)
- begin
- case (ADR_I)
- // Write operations.
- ADDR_CTRL:
- begin
- ctrl_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK0:
- begin
- block0_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK1:
- begin
- block1_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK2:
- begin
- block2_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK3:
- begin
- block3_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK4:
- begin
- block4_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK5:
- begin
- block5_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK6:
- begin
- block6_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK7:
- begin
- block7_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK8:
- begin
- block8_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK9:
- begin
- block9_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK10:
- begin
- block10_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK11:
- begin
- block11_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK12:
- begin
- block12_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK13:
- begin
- block13_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK14:
- begin
- block14_we = 1;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK15:
- begin
- block15_we = 1;
- tmp_ACK_O = 1;
- end
-
- default:
- begin
- tmp_ERR_O = 1;
- end
- endcase // case (ADR_I)
- end // if (WE_I)
-
- else
- begin
- case (ADR_I)
- // Read operations.
- ADDR_NAME0:
- begin
- tmp_data_out = CORE_NAME0;
- tmp_ACK_O = 1;
- end
-
- ADDR_NAME1:
- begin
- tmp_data_out = CORE_NAME1;
- tmp_ACK_O = 1;
- end
-
- ADDR_VERSION:
- begin
- tmp_data_out = CORE_VERSION;
- tmp_ACK_O = 1;
- end
-
- ADDR_CTRL:
- begin
- tmp_data_out = {28'h0000000, 2'b00, next_reg, init_reg};
- tmp_ACK_O = 1;
- end
-
- ADDR_STATUS:
- begin
- tmp_data_out = {28'h0000000, 2'b00, digest_valid_reg, ready_reg};
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK0:
- begin
- tmp_data_out = block0_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK1:
- begin
- tmp_data_out = block1_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK2:
- begin
- tmp_data_out = block2_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK3:
- begin
- tmp_data_out = block3_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK4:
- begin
- tmp_data_out = block4_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK5:
- begin
- tmp_data_out = block5_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK6:
- begin
- tmp_data_out = block6_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK7:
- begin
- tmp_data_out = block7_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK8:
- begin
- tmp_data_out = block8_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK9:
- begin
- tmp_data_out = block9_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK10:
- begin
- tmp_data_out = block10_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK11:
- begin
- tmp_data_out = block11_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK12:
- begin
- tmp_data_out = block12_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK13:
- begin
- tmp_data_out = block13_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK14:
- begin
- tmp_data_out = block14_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_BLOCK15:
- begin
- tmp_data_out = block15_reg;
- tmp_ACK_O = 1;
- end
-
- ADDR_DIGEST0:
- begin
- tmp_data_out = digest_reg[255 : 224];
- tmp_ACK_O = 1;
- end
-
- ADDR_DIGEST1:
- begin
- tmp_data_out = digest_reg[223 : 192];
- tmp_ACK_O = 1;
- end
-
- ADDR_DIGEST2:
- begin
- tmp_data_out = digest_reg[191 : 160];
- tmp_ACK_O = 1;
- end
-
- ADDR_DIGEST3:
- begin
- tmp_data_out = digest_reg[159 : 128];
- tmp_ACK_O = 1;
- end
-
- ADDR_DIGEST4:
- begin
- tmp_data_out = digest_reg[127 : 96];
- tmp_ACK_O = 1;
- end
-
- ADDR_DIGEST5:
- begin
- tmp_data_out = digest_reg[95 : 64];
- tmp_ACK_O = 1;
- end
-
- ADDR_DIGEST6:
- begin
- tmp_data_out = digest_reg[63 : 32];
- tmp_ACK_O = 1;
- end
-
- ADDR_DIGEST7:
- begin
- tmp_data_out = digest_reg[31 : 0];
- tmp_ACK_O = 1;
- end
-
- default:
- begin
- tmp_ERR_O = 1;
- end
- endcase // case (ADR_I)
- end
- end
- end // addr_decoder
-endmodule // wb_sha256
-
-//======================================================================
-// EOF wb_sha256.v
-//======================================================================
More information about the Commits
mailing list