[Cryptech Tech] EIM Baseline Project

[Paul Selkirk]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I've also been looking at the code (the Verilog as well as the C) -
very nice. Of course, we implemented a test adder back in December,
using Bunnie's design, so the real test will be hooking up a SHA core,
but I think we have reason to be optimistic.

				paul

On 01/31/2015 05:08 AM, Joachim Strömbergson wrote:
> Aloha!
> 
> Well that was easy.
> 
> I've just created a new ISE project, added all source files and
> built the novena baseline. The build goes through clean with zero
> errors and warnings (the latter is actuallt quite impressive in
> ISE.).
> 
> I've uploaded the bitfile and the sw source code to the Novena.
> Compiled the test-adder program, configuered the FPGA and then
> executed the test program. Everything worked like a charm.
> 
> I'd say we have something that works for the Novena with the EIM 
> interface. Very, very cool.
> 
> _______________________________________________ Tech mailing list 
> Tech at cryptech.is https://lists.cryptech.is/listinfo/tech
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1

iQEcBAEBAgAGBQJUzSg7AAoJELAqzRn9CEWT85QIAK5NlwaCV4FkVkKVGzHv/u2s
NoJBqb+rBMEzeOzTE4tKP8/KsoOOOmc1rBHPbOyLU8FOFf2Iw4TErRitoJRNOaE0
bi0Te2BEkqVJ+UsqC5jKGxAQDipt3h4qEOs+TtuMIMPjJ1uUUSQVtvWC/fxW3q1m
4TbA4IcJfSlTcvi6B0mHLCVIZdikhl5hU16WJN+Aj4bq648LVWuj+0itgnKdwBf5
Ws+Q8KJPn4sZwt7FT9vOcyTKcplWxVOlURN+0vrUsDoeyobZrAoE4WPMRLw4vt4/
q2L0OK6vZfz56If2EAlCn8lBXHxQ4hfMSOuhk6Uovoik4QhJUWjyfi1pIImXcfA=
=T/xf
-----END PGP SIGNATURE-----