[Cryptech-Commits] [core/util/keywrap] 10/95: Adding initial version of top level wrapper for the keywrap core.
git at cryptech.is
git at cryptech.is
Wed Mar 25 17:18:09 UTC 2020
This is an automated email from the git hooks/post-receive script.
paul at psgd.org pushed a commit to branch master
in repository core/util/keywrap.
commit 3fc96475e9e11b686643a794dda9089543ba4246
Author: Joachim Strömbergson <joachim at secworks.se>
AuthorDate: Wed Jun 27 15:20:30 2018 +0200
Adding initial version of top level wrapper for the keywrap core.
---
src/rtl/keywrap.v | 253 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 253 insertions(+)
diff --git a/src/rtl/keywrap.v b/src/rtl/keywrap.v
new file mode 100644
index 0000000..67c70af
--- /dev/null
+++ b/src/rtl/keywrap.v
@@ -0,0 +1,253 @@
+//======================================================================
+//
+// keywrap.v
+// --------
+// Top level wrapper for the KEY WRAP core.
+//
+//
+// Author: Joachim Strombergson
+// Copyright (c) 2018, NORDUnet A/S
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+// - Redistributions of source code must retain the above copyright notice,
+// this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in the
+// documentation and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may
+// be used to endorse or promote products derived from this software
+// without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+//======================================================================
+
+module keywrap(
+ // Clock and reset.
+ input wire clk,
+ input wire reset_n,
+
+ // Control.
+ input wire cs,
+ input wire we,
+
+ // Data ports.
+ input wire [7 : 0] address,
+ input wire [31 : 0] write_data,
+ output wire [31 : 0] read_data,
+ output wire error
+ );
+
+
+ //----------------------------------------------------------------
+ // Internal constant and parameter definitions.
+ //----------------------------------------------------------------
+ localparam ADDR_NAME0 = 8'h00;
+ localparam ADDR_NAME1 = 8'h01;
+ localparam ADDR_VERSION = 8'h02;
+
+ localparam ADDR_CTRL = 8'h08;
+ localparam CTRL_INIT_BIT = 0;
+ localparam CTRL_NEXT_BIT = 1;
+
+ localparam ADDR_STATUS = 8'h09;
+ localparam STATUS_READY_BIT = 0;
+ localparam STATUS_VALID_BIT = 1;
+
+ localparam ADDR_CONFIG = 8'h0a;
+ localparam CTRL_ENCDEC_BIT = 0;
+ localparam CTRL_KEYLEN_BIT = 1;
+
+ localparam ADDR_KEY0 = 8'h10;
+ localparam ADDR_KEY7 = 8'h17;
+
+ localparam ADDR_WRITE_DATA = 8'h20;
+
+ localparam ADDR_READ_DATA = 8'h30;
+
+ localparam CORE_NAME0 = 32'h6b657920; // "key "
+ localparam CORE_NAME1 = 32'h77726170; // "wrap"
+ localparam CORE_VERSION = 32'h302e3130; // "0.10"
+
+
+ //----------------------------------------------------------------
+ // Registers including update variables and write enable.
+ //----------------------------------------------------------------
+ reg init_reg;
+ reg init_new;
+
+ reg next_reg;
+ reg next_new;
+
+ reg encdec_reg;
+ reg keylen_reg;
+ reg config_we;
+
+ reg [31 : 0] key_reg [0 : 7];
+ reg key_we;
+
+ reg valid_reg;
+ reg ready_reg;
+
+
+ //----------------------------------------------------------------
+ // Wires.
+ //----------------------------------------------------------------
+ reg [31 : 0] tmp_read_data;
+ reg tmp_error;
+
+ wire core_encdec;
+ wire core_init;
+ wire core_next;
+ wire core_ready;
+ wire [255 : 0] core_key;
+ wire core_keylen;
+ wire [127 : 0] core_block;
+ wire [127 : 0] core_result;
+ wire core_valid;
+
+
+ //----------------------------------------------------------------
+ // Concurrent connectivity for ports etc.
+ //----------------------------------------------------------------
+ assign read_data = tmp_read_data;
+ assign error = tmp_error;
+
+ assign core_key = {key_reg[0], key_reg[1], key_reg[2], key_reg[3],
+ key_reg[4], key_reg[5], key_reg[6], key_reg[7]};
+
+ assign core_block = {block_reg[0], block_reg[1],
+ block_reg[2], block_reg[3]};
+ assign core_init = init_reg;
+ assign core_next = next_reg;
+ assign core_encdec = encdec_reg;
+ assign core_keylen = keylen_reg;
+
+
+ //----------------------------------------------------------------
+ // core instantiation.
+ //----------------------------------------------------------------
+ keywrap_core core(
+ .clk(clk),
+ .reset_n(reset_n),
+
+ .encdec(core_encdec),
+ .init(core_init),
+ .next(core_next),
+ .ready(core_ready),
+
+ .key(core_key),
+ .keylen(core_keylen),
+
+ .block(core_block),
+ .result(core_result),
+ .result_valid(core_valid)
+ );
+
+
+ //----------------------------------------------------------------
+ // reg_update
+ //----------------------------------------------------------------
+ always @ (posedge clk or negedge reset_n)
+ begin : reg_update
+ integer i;
+
+ if (!reset_n)
+ begin
+ for (i = 0 ; i < 8 ; i = i + 1)
+ key_reg[i] <= 32'h0;
+
+ init_reg <= 1'b0;
+ next_reg <= 1'b0;
+ encdec_reg <= 1'b0;
+ keylen_reg <= 1'b0;
+
+ valid_reg <= 1'b0;
+ ready_reg <= 1'b0;
+ end
+ else
+ begin
+ ready_reg <= core_ready;
+ valid_reg <= core_valid;
+ init_reg <= init_new;
+ next_reg <= next_new;
+
+ if (config_we)
+ begin
+ encdec_reg <= write_data[CTRL_ENCDEC_BIT];
+ keylen_reg <= write_data[CTRL_KEYLEN_BIT];
+ end
+
+ if (key_we)
+ key_reg[address[2 : 0]] <= write_data;
+ end
+ end // reg_update
+
+
+ //----------------------------------------------------------------
+ // api
+ //
+ // The interface command decoding logic.
+ //----------------------------------------------------------------
+ always @*
+ begin : api
+ init_new = 1'b0;
+ next_new = 1'b0;
+ config_we = 1'b0;
+ key_we = 1'b0;
+ tmp_read_data = 32'h0;
+ tmp_error = 1'b0;
+
+ if (cs)
+ begin
+ if (we)
+ begin
+ if (address == ADDR_CTRL)
+ begin
+ init_new = write_data[CTRL_INIT_BIT];
+ next_new = write_data[CTRL_NEXT_BIT];
+ end
+
+ if (address == ADDR_CONFIG)
+ config_we = 1'b1;
+
+ if ((address >= ADDR_KEY0) && (address <= ADDR_KEY7))
+ key_we = 1'b1;
+ end // if (we)
+
+ else
+ begin
+ case (address)
+ ADDR_NAME0: tmp_read_data = CORE_NAME0;
+ ADDR_NAME1: tmp_read_data = CORE_NAME1;
+ ADDR_VERSION: tmp_read_data = CORE_VERSION;
+ ADDR_CTRL: tmp_read_data = {28'h0, keylen_reg, encdec_reg, next_reg, init_reg};
+ ADDR_STATUS: tmp_read_data = {30'h0, valid_reg, ready_reg};
+
+ default:
+ begin
+ end
+ endcase // case (address)
+ end
+ end
+ end // addr_decoder
+endmodule // keywrap
+
+//======================================================================
+// EOF keywrap.v
+//======================================================================
More information about the Commits
mailing list