[Cryptech-Commits] [user/js/fpga_mkm] branch master updated: Adding initial version of real testbench for the fpga_mkm.

[git at cryptech.is]

This is an automated email from the git hooks/post-receive script.

joachim at secworks.se pushed a commit to branch master
in repository user/js/fpga_mkm.

The following commit(s) were added to refs/heads/master by this push:
     new 3493b95  Adding initial version of real testbench for the fpga_mkm.
3493b95 is described below

commit 3493b95cb0be58262a385afd0d19ab6fb992c16e
Author: Joachim Strömbergson <joachim at assured.se>
AuthorDate: Tue Feb 12 13:01:08 2019 +0100

    Adding initial version of real testbench for the fpga_mkm.
---
 src/tb/tb_fpga_mkm.v | 192 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 192 insertions(+)

diff --git a/src/tb/tb_fpga_mkm.v b/src/tb/tb_fpga_mkm.v
index e69de29..682a99d 100644
--- a/src/tb/tb_fpga_mkm.v
+++ b/src/tb/tb_fpga_mkm.v
@@ -0,0 +1,192 @@
+//======================================================================
+//
+// tb_fpga_mkm
+// -----------
+// Testbench for the FPGA based Master Key Memory (MKM).
+//
+//
+// Author: Joachim Strombergson
+// Copyright (c) 2019, NORDUnet A/S
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+// - Redistributions of source code must retain the above copyright notice,
+//   this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright
+//   notice, this list of conditions and the following disclaimer in the
+//   documentation and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may
+//   be used to endorse or promote products derived from this software
+//   without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+//======================================================================
+
+module tb_fpga_mklm();
+
+  //----------------------------------------------------------------
+  // Parameters.
+  //----------------------------------------------------------------
+  parameter DEBUG = 1;
+
+  parameter CLK_HALF_PERIOD = 1;
+  parameter CLK_PERIOD      = 2 * CLK_HALF_PERIOD;
+
+
+  //----------------------------------------------------------------
+  // Variables, regs and wires.
+  //----------------------------------------------------------------
+  integer cycle_ctr;
+  integer error_ctr;
+  integer tc_ctr;
+
+  reg  tb_clk;
+  reg  tb_sclk;
+  reg  tb_mosi;
+  wire tb_miso;
+  reg  tb_tamper;
+  wire tb_alarm;
+  wire tb_rled1;
+  wire tb_rled2;
+  wire tb_rled3;
+  wire tb_rled4;
+  wire tb_gled5;
+
+
+  //----------------------------------------------------------------
+  // Device Under Test.
+  //----------------------------------------------------------------
+  fpga_mkm dut(
+               .clk(tb_clk),
+
+               .sclk(tb_sclk),
+               .mosi(tb_mosi),
+               .miso(tb_miso),
+
+               .tamper(tb_tamper),
+               .alarm(tb_alarm),
+
+               .rled1(tb_rled1),
+               .rled2(tb_rled2),
+               .rled3(tb_rled3),
+               .rled4(tb_rled4),
+               .gled5(tb_gled5)
+              );
+
+
+  //----------------------------------------------------------------
+  // clk_gen
+  //
+  // Always running clock generator process.
+  //----------------------------------------------------------------
+  always
+    begin : clk_gen
+      #CLK_HALF_PERIOD;
+      tb_clk = !tb_clk;
+    end // clk_gen
+
+
+  //----------------------------------------------------------------
+  // sys_monitor()
+  //
+  // An always running process that creates a cycle counter and
+  // conditionally displays information about the DUT.
+  //----------------------------------------------------------------
+  always
+    begin : sys_monitor
+      cycle_ctr = cycle_ctr + 1;
+      #(CLK_PERIOD);
+    end
+
+
+  //----------------------------------------------------------------
+  // display_test_results()
+  //
+  // Display the accumulated test results.
+  //----------------------------------------------------------------
+  task display_test_results;
+    begin
+      if (error_ctr == 0)
+        begin
+          $display("*** All %02d test cases completed successfully", tc_ctr);
+        end
+      else
+        begin
+          $display("*** %02d tests completed - %02d test cases did not complete successfully.",
+                   tc_ctr, error_ctr);
+        end
+    end
+  endtask // display_test_results
+
+
+  //----------------------------------------------------------------
+  // init_sim
+  //
+  // Initialize DUT inputs, test case counters, clock etc.
+  //----------------------------------------------------------------
+  task init_sim;
+    begin : init_sim
+      cycle_ctr = 0;
+      error_ctr = 0;
+      tc_ctr    = 0;
+
+      tb_clk    = 1'h0;
+      tb_sclk   = 1'h0;
+      tb_mosi   = 1'h0;
+      tb_tamper = 1'h0;
+    end
+  endtask // init_sim
+
+
+  //----------------------------------------------------------------
+  // wait_cycles
+  //----------------------------------------------------------------
+  task wait_cycles (input integer cycles);
+    begin : wait_cycles
+      #(cycles);
+    end
+  endtask // wait_cycles
+
+
+  //----------------------------------------------------------------
+  // init_sim()
+  //
+  // Initialize all counters and testbed functionality as well
+  // as setting the DUT inputs to defined values.
+  //----------------------------------------------------------------
+  initial
+    begin
+      $display("   -= Testbench for fpga_mkm started =-");
+      $display("    ==================================");
+      $display("");
+
+      init_sim();
+      wait_cycles(100);
+      display_test_results();
+
+      $display("");
+      $display("   -= Testbench for fpga_mkm completed =-");
+      $display("    ====================================");
+      $finish;
+    end
+
+endmodule // tb_keywrap_core
+
+//======================================================================
+// EOF tb_fpga_mkm.v
+//======================================================================

-- 
To stop receiving notification emails like this one, please contact
the administrator of this repository.