[Cryptech-Commits] [sw/stm32] 01/04: Based on user/ft/stm32-dev-bridge, without the project-specific build directories (and duplicated code).

git at cryptech.is git at cryptech.is
Sun Nov 1 04:00:50 UTC 2015


This is an automated email from the git hooks/post-receive script.

paul at psgd.org pushed a commit to branch master
in repository sw/stm32.

commit 26f12903dab2fafeaaefb02349763618ce96d070
Author: Paul Selkirk <paul at psgd.org>
Date:   Mon Oct 26 15:18:58 2015 -0400

    Based on user/ft/stm32-dev-bridge, without the project-specific build
    directories (and duplicated code).
---
 Device/ldscripts/stm32f429bitx.ld                  |  186 +
 Device/startup_stm32f429xx.s                       |  561 ++
 Device/system_stm32f4xx.c                          |  587 ++
 .../Device/ST/STM32F4xx/Include/stm32f429xx.h      | 9037 ++++++++++++++++++++
 .../CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h  |  232 +
 .../Device/ST/STM32F4xx/Include/system_stm32f4xx.h |  122 +
 Drivers/CMSIS/Include/core_cm4.h                   | 1802 ++++
 Drivers/CMSIS/Include/core_cmFunc.h                |  637 ++
 Drivers/CMSIS/Include/core_cmInstr.h               |  880 ++
 Drivers/CMSIS/Include/core_cmSimd.h                |  697 ++
 Drivers/Makefile                                   |   64 +
 .../Inc/Legacy/stm32_hal_legacy.h                  | 2510 ++++++
 Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h   |  233 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h   |  766 ++
 .../Inc/stm32f4xx_hal_adc_ex.h                     |  352 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h   |  775 ++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cec.h   |  681 ++
 .../Inc/stm32f4xx_hal_conf_template.h              |  427 +
 .../Inc/stm32f4xx_hal_cortex.h                     |  200 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h   |  249 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp.h  |  536 ++
 .../Inc/stm32f4xx_hal_cryp_ex.h                    |  221 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h   |  412 +
 .../Inc/stm32f4xx_hal_dac_ex.h                     |  199 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi.h  |  515 ++
 .../Inc/stm32f4xx_hal_dcmi_ex.h                    |  221 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h   |  214 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h   |  767 ++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h |  554 ++
 .../Inc/stm32f4xx_hal_dma_ex.h                     |  123 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h   | 2217 +++++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h |  442 +
 .../Inc/stm32f4xx_hal_flash_ex.h                   |  866 ++
 .../Inc/stm32f4xx_hal_flash_ramfunc.h              |   97 +
 .../Inc/stm32f4xx_hal_fmpi2c.h                     |  577 ++
 .../Inc/stm32f4xx_hal_fmpi2c_ex.h                  |  151 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h  |  327 +
 .../Inc/stm32f4xx_hal_gpio_ex.h                    | 1100 +++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash.h  |  450 +
 .../Inc/stm32f4xx_hal_hash_ex.h                    |  200 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h   |  269 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h   |  535 ++
 .../Inc/stm32f4xx_hal_i2c_ex.h                     |  136 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h   |  511 ++
 .../Inc/stm32f4xx_hal_i2s_ex.h                     |  148 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_irda.h  |  538 ++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h  |  288 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h  |  631 ++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h  |  316 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h   |  301 +
 .../Inc/stm32f4xx_hal_pccard.h                     |  267 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h   |  341 +
 .../Inc/stm32f4xx_hal_pcd_ex.h                     |  105 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h   |  484 ++
 .../Inc/stm32f4xx_hal_pwr_ex.h                     |  291 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h  |  788 ++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h   | 1537 ++++
 .../Inc/stm32f4xx_hal_rcc_ex.h                     | 2707 ++++++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h   |  364 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h   |  830 ++
 .../Inc/stm32f4xx_hal_rtc_ex.h                     | 1000 +++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai.h   |  908 ++
 .../Inc/stm32f4xx_hal_sai_ex.h                     |  101 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h    |  789 ++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h |  196 +
 .../Inc/stm32f4xx_hal_smartcard.h                  |  620 ++
 .../Inc/stm32f4xx_hal_spdifrx.h                    |  559 ++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h   |  575 ++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h  |  202 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h   | 1608 ++++
 .../Inc/stm32f4xx_hal_tim_ex.h                     |  325 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h  |  722 ++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_usart.h |  588 ++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_wwdg.h  |  349 +
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h    | 1421 +++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h   |  978 +++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h  |  908 ++
 .../STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h    |  463 +
 Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c   |  531 ++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c   | 1412 +++
 .../Src/stm32f4xx_hal_adc_ex.c                     |  872 ++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c   | 1438 ++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c   | 1112 +++
 .../Src/stm32f4xx_hal_cortex.c                     |  436 +
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c   |  342 +
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c  | 3813 +++++++++
 .../Src/stm32f4xx_hal_cryp_ex.c                    | 3043 +++++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c   |  953 +++
 .../Src/stm32f4xx_hal_dac_ex.c                     |  382 +
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c  |  830 ++
 .../Src/stm32f4xx_hal_dcmi_ex.c                    |  212 +
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c   |  928 ++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c | 1266 +++
 .../Src/stm32f4xx_hal_dma_ex.c                     |  307 +
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c   | 2017 +++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c |  761 ++
 .../Src/stm32f4xx_hal_flash_ex.c                   | 1316 +++
 .../Src/stm32f4xx_hal_flash_ramfunc.c              |  194 +
 .../Src/stm32f4xx_hal_fmpi2c.c                     | 4098 +++++++++
 .../Src/stm32f4xx_hal_fmpi2c_ex.c                  |  326 +
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c  |  545 ++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c  | 1862 ++++
 .../Src/stm32f4xx_hal_hash_ex.c                    | 1642 ++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c   | 1215 +++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c   | 3649 ++++++++
 .../Src/stm32f4xx_hal_i2c_ex.c                     |  204 +
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c   | 1408 +++
 .../Src/stm32f4xx_hal_i2s_ex.c                     | 1479 ++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c  | 1504 ++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c  |  361 +
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c  | 1191 +++
 .../Src/stm32f4xx_hal_msp_template.c               |  119 +
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c  | 1125 +++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c   | 1007 +++
 .../Src/stm32f4xx_hal_pccard.c                     |  742 ++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c   | 1208 +++
 .../Src/stm32f4xx_hal_pcd_ex.c                     |  198 +
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c   |  574 ++
 .../Src/stm32f4xx_hal_pwr_ex.c                     |  624 ++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c  | 1942 +++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c   | 1234 +++
 .../Src/stm32f4xx_hal_rcc_ex.c                     | 1676 ++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c   |  515 ++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c   | 1545 ++++
 .../Src/stm32f4xx_hal_rtc_ex.c                     | 1710 ++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c   | 1908 +++++
 .../Src/stm32f4xx_hal_sai_ex.c                     |  269 +
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c    | 3488 ++++++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c |  842 ++
 .../Src/stm32f4xx_hal_smartcard.c                  | 1303 +++
 .../Src/stm32f4xx_hal_spdifrx.c                    | 1210 +++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c   | 2298 +++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c  |  682 ++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c   | 5335 ++++++++++++
 .../Src/stm32f4xx_hal_tim_ex.c                     | 1864 ++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c  | 1932 +++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c | 1857 ++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c  |  454 +
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c    | 1733 ++++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c   |  955 +++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c  |  505 ++
 .../STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c    | 1705 ++++
 Makefile                                           |   82 +
 bin/debug                                          |    7 +
 bin/flash-target                                   |   27 +
 fmc-test.c                                         |  240 +
 include/stm-fmc.h                                  |   23 +
 include/stm-init.h                                 |    9 +
 include/stm-led.h                                  |   16 +
 include/stm-uart.h                                 |   18 +
 include/stm32f4xx_hal_conf.h                       |  423 +
 include/stm32f4xx_it.h                             |   56 +
 led-test.c                                         |   33 +
 libc/printf.c                                      |  412 +
 short-test.c                                       |  205 +
 src/stm-fmc.c                                      |  324 +
 src/stm-init.c                                     |  210 +
 src/stm-uart.c                                     |   85 +
 src/stm32f4xx_hal_msp.c                            |  143 +
 src/stm32f4xx_it.c                                 |   73 +
 uart-test.c                                        |   34 +
 161 files changed, 141514 insertions(+)

diff --git a/Device/ldscripts/stm32f429bitx.ld b/Device/ldscripts/stm32f429bitx.ld
new file mode 100644
index 0000000..fd428f4
--- /dev/null
+++ b/Device/ldscripts/stm32f429bitx.ld
@@ -0,0 +1,186 @@
+/*
+*****************************************************************************
+**
+**  File        : stm32_flash.ld
+**
+**  Abstract    : Linker script for STM32F429BI Device with
+**                2048KByte FLASH, 192KByte RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used.
+**
+**  Target      : STMicroelectronics STM32
+**
+**  Environment : Atollic TrueSTUDIO(R)
+**
+**  Distribution: The file is distributed �as is,� without any warranty
+**                of any kind.
+**
+**  (c)Copyright Atollic AB.
+**  You may use this file as-is or modify it according to the needs of your
+**  project. This file may only be built (assembled or compiled and linked)
+**  using the Atollic TrueSTUDIO(R) product. The use of this file together
+**  with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x2002FFFF;    /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0;      /* required amount of heap  */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx)      : ORIGIN = 0x8000000, LENGTH = 2048K
+RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 192K
+CCMRAM (rw)      : ORIGIN = 0x10000000, LENGTH = 64K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+  .ARM : {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM AT> FLASH
+
+  _siccmram = LOADADDR(.ccmram);
+
+  /* CCM-RAM section 
+  * 
+  * IMPORTANT NOTE! 
+  * If initialized variables will be placed in this section, 
+  * the startup code needs to be modified to copy the init-values.  
+  */
+  .ccmram :
+  {
+    . = ALIGN(4);
+    _sccmram = .;       /* create a global symbol at ccmram start */
+    *(.ccmram)
+    *(.ccmram*)
+    
+    . = ALIGN(4);
+    _eccmram = .;       /* create a global symbol at ccmram end */
+  } >CCMRAM AT> FLASH
+
+  
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss secion */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(4);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(4);
+  } >RAM
+
+  
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/Device/startup_stm32f429xx.s b/Device/startup_stm32f429xx.s
new file mode 100644
index 0000000..f8ba161
--- /dev/null
+++ b/Device/startup_stm32f429xx.s
@@ -0,0 +1,561 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f429xx.s
+  * @author    MCD Application Team
+  * @version   V2.3.2
+  * @date      26-June-2015
+  * @brief     STM32F429xx Devices vector table for Atollic TrueSTUDIO toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m4
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack       /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs  r1, #0
+  b  LoopCopyDataInit
+
+CopyDataInit:
+  ldr  r3, =_sidata
+  ldr  r3, [r3, r1]
+  str  r3, [r0, r1]
+  adds  r1, r1, #4
+
+LoopCopyDataInit:
+  ldr  r0, =_sdata
+  ldr  r3, =_edata
+  adds  r2, r0, r1
+  cmp  r2, r3
+  bcc  CopyDataInit
+  ldr  r2, =_sbss
+  b  LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs  r3, #0
+  str  r3, [r2], #4
+
+LoopFillZerobss:
+  ldr  r3, = _ebss
+  cmp  r2, r3
+  bcc  FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl  main
+  bx  lr
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None
+ * @retval None
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+*******************************************************************************/
+   .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+
+  /* External Interrupts */
+  .word     WWDG_IRQHandler                   /* Window WatchDog              */
+  .word     PVD_IRQHandler                    /* PVD through EXTI Line detection */
+  .word     TAMP_STAMP_IRQHandler             /* Tamper and TimeStamps through the EXTI line */
+  .word     RTC_WKUP_IRQHandler               /* RTC Wakeup through the EXTI line */
+  .word     FLASH_IRQHandler                  /* FLASH                        */
+  .word     RCC_IRQHandler                    /* RCC                          */
+  .word     EXTI0_IRQHandler                  /* EXTI Line0                   */
+  .word     EXTI1_IRQHandler                  /* EXTI Line1                   */
+  .word     EXTI2_IRQHandler                  /* EXTI Line2                   */
+  .word     EXTI3_IRQHandler                  /* EXTI Line3                   */
+  .word     EXTI4_IRQHandler                  /* EXTI Line4                   */
+  .word     DMA1_Stream0_IRQHandler           /* DMA1 Stream 0                */
+  .word     DMA1_Stream1_IRQHandler           /* DMA1 Stream 1                */
+  .word     DMA1_Stream2_IRQHandler           /* DMA1 Stream 2                */
+  .word     DMA1_Stream3_IRQHandler           /* DMA1 Stream 3                */
+  .word     DMA1_Stream4_IRQHandler           /* DMA1 Stream 4                */
+  .word     DMA1_Stream5_IRQHandler           /* DMA1 Stream 5                */
+  .word     DMA1_Stream6_IRQHandler           /* DMA1 Stream 6                */
+  .word     ADC_IRQHandler                    /* ADC1, ADC2 and ADC3s         */
+  .word     CAN1_TX_IRQHandler                /* CAN1 TX                      */
+  .word     CAN1_RX0_IRQHandler               /* CAN1 RX0                     */
+  .word     CAN1_RX1_IRQHandler               /* CAN1 RX1                     */
+  .word     CAN1_SCE_IRQHandler               /* CAN1 SCE                     */
+  .word     EXTI9_5_IRQHandler                /* External Line[9:5]s          */
+  .word     TIM1_BRK_TIM9_IRQHandler          /* TIM1 Break and TIM9          */
+  .word     TIM1_UP_TIM10_IRQHandler          /* TIM1 Update and TIM10        */
+  .word     TIM1_TRG_COM_TIM11_IRQHandler     /* TIM1 Trigger and Commutation and TIM11 */
+  .word     TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word     TIM2_IRQHandler                   /* TIM2                         */
+  .word     TIM3_IRQHandler                   /* TIM3                         */
+  .word     TIM4_IRQHandler                   /* TIM4                         */
+  .word     I2C1_EV_IRQHandler                /* I2C1 Event                   */
+  .word     I2C1_ER_IRQHandler                /* I2C1 Error                   */
+  .word     I2C2_EV_IRQHandler                /* I2C2 Event                   */
+  .word     I2C2_ER_IRQHandler                /* I2C2 Error                   */
+  .word     SPI1_IRQHandler                   /* SPI1                         */
+  .word     SPI2_IRQHandler                   /* SPI2                         */
+  .word     USART1_IRQHandler                 /* USART1                       */
+  .word     USART2_IRQHandler                 /* USART2                       */
+  .word     USART3_IRQHandler                 /* USART3                       */
+  .word     EXTI15_10_IRQHandler              /* External Line[15:10]s        */
+  .word     RTC_Alarm_IRQHandler              /* RTC Alarm (A and B) through EXTI Line */
+  .word     OTG_FS_WKUP_IRQHandler            /* USB OTG FS Wakeup through EXTI line */
+  .word     TIM8_BRK_TIM12_IRQHandler         /* TIM8 Break and TIM12         */
+  .word     TIM8_UP_TIM13_IRQHandler          /* TIM8 Update and TIM13        */
+  .word     TIM8_TRG_COM_TIM14_IRQHandler     /* TIM8 Trigger and Commutation and TIM14 */
+  .word     TIM8_CC_IRQHandler                /* TIM8 Capture Compare         */
+  .word     DMA1_Stream7_IRQHandler           /* DMA1 Stream7                 */
+  .word     FMC_IRQHandler                    /* FMC                         */
+  .word     SDIO_IRQHandler                   /* SDIO                         */
+  .word     TIM5_IRQHandler                   /* TIM5                         */
+  .word     SPI3_IRQHandler                   /* SPI3                         */
+  .word     UART4_IRQHandler                  /* UART4                        */
+  .word     UART5_IRQHandler                  /* UART5                        */
+  .word     TIM6_DAC_IRQHandler               /* TIM6 and DAC1&2 underrun errors */
+  .word     TIM7_IRQHandler                   /* TIM7                         */
+  .word     DMA2_Stream0_IRQHandler           /* DMA2 Stream 0                */
+  .word     DMA2_Stream1_IRQHandler           /* DMA2 Stream 1                */
+  .word     DMA2_Stream2_IRQHandler           /* DMA2 Stream 2                */
+  .word     DMA2_Stream3_IRQHandler           /* DMA2 Stream 3                */
+  .word     DMA2_Stream4_IRQHandler           /* DMA2 Stream 4                */
+  .word     ETH_IRQHandler                    /* Ethernet                     */
+  .word     ETH_WKUP_IRQHandler               /* Ethernet Wakeup through EXTI line */
+  .word     CAN2_TX_IRQHandler                /* CAN2 TX                      */
+  .word     CAN2_RX0_IRQHandler               /* CAN2 RX0                     */
+  .word     CAN2_RX1_IRQHandler               /* CAN2 RX1                     */
+  .word     CAN2_SCE_IRQHandler               /* CAN2 SCE                     */
+  .word     OTG_FS_IRQHandler                 /* USB OTG FS                   */
+  .word     DMA2_Stream5_IRQHandler           /* DMA2 Stream 5                */
+  .word     DMA2_Stream6_IRQHandler           /* DMA2 Stream 6                */
+  .word     DMA2_Stream7_IRQHandler           /* DMA2 Stream 7                */
+  .word     USART6_IRQHandler                 /* USART6                       */
+  .word     I2C3_EV_IRQHandler                /* I2C3 event                   */
+  .word     I2C3_ER_IRQHandler                /* I2C3 error                   */
+  .word     OTG_HS_EP1_OUT_IRQHandler         /* USB OTG HS End Point 1 Out   */
+  .word     OTG_HS_EP1_IN_IRQHandler          /* USB OTG HS End Point 1 In    */
+  .word     OTG_HS_WKUP_IRQHandler            /* USB OTG HS Wakeup through EXTI */
+  .word     OTG_HS_IRQHandler                 /* USB OTG HS                   */
+  .word     DCMI_IRQHandler                   /* DCMI                         */
+  .word     0                                 /* Reserved                     */
+  .word     HASH_RNG_IRQHandler               /* Hash and Rng                 */
+  .word     FPU_IRQHandler                    /* FPU                          */
+  .word     UART7_IRQHandler                  /* UART7                        */
+  .word     UART8_IRQHandler                  /* UART8                        */
+  .word     SPI4_IRQHandler                   /* SPI4                         */
+  .word     SPI5_IRQHandler                   /* SPI5 						  */
+  .word     SPI6_IRQHandler                   /* SPI6						  */
+  .word     SAI1_IRQHandler                   /* SAI1						  */
+  .word     LTDC_IRQHandler                   /* LTDC_IRQHandler			  */
+  .word     LTDC_ER_IRQHandler                /* LTDC_ER_IRQHandler			  */
+  .word     DMA2D_IRQHandler                  /* DMA2D                        */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+   .weak      NMI_Handler
+   .thumb_set NMI_Handler,Default_Handler
+
+   .weak      HardFault_Handler
+   .thumb_set HardFault_Handler,Default_Handler
+
+   .weak      MemManage_Handler
+   .thumb_set MemManage_Handler,Default_Handler
+
+   .weak      BusFault_Handler
+   .thumb_set BusFault_Handler,Default_Handler
+
+   .weak      UsageFault_Handler
+   .thumb_set UsageFault_Handler,Default_Handler
+
+   .weak      SVC_Handler
+   .thumb_set SVC_Handler,Default_Handler
+
+   .weak      DebugMon_Handler
+   .thumb_set DebugMon_Handler,Default_Handler
+
+   .weak      PendSV_Handler
+   .thumb_set PendSV_Handler,Default_Handler
+
+   .weak      SysTick_Handler
+   .thumb_set SysTick_Handler,Default_Handler
+
+   .weak      WWDG_IRQHandler
+   .thumb_set WWDG_IRQHandler,Default_Handler
+
+   .weak      PVD_IRQHandler
+   .thumb_set PVD_IRQHandler,Default_Handler
+
+   .weak      TAMP_STAMP_IRQHandler
+   .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+   .weak      RTC_WKUP_IRQHandler
+   .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+   .weak      FLASH_IRQHandler
+   .thumb_set FLASH_IRQHandler,Default_Handler
+
+   .weak      RCC_IRQHandler
+   .thumb_set RCC_IRQHandler,Default_Handler
+
+   .weak      EXTI0_IRQHandler
+   .thumb_set EXTI0_IRQHandler,Default_Handler
+
+   .weak      EXTI1_IRQHandler
+   .thumb_set EXTI1_IRQHandler,Default_Handler
+
+   .weak      EXTI2_IRQHandler
+   .thumb_set EXTI2_IRQHandler,Default_Handler
+
+   .weak      EXTI3_IRQHandler
+   .thumb_set EXTI3_IRQHandler,Default_Handler
+
+   .weak      EXTI4_IRQHandler
+   .thumb_set EXTI4_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream0_IRQHandler
+   .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream1_IRQHandler
+   .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream2_IRQHandler
+   .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream3_IRQHandler
+   .thumb_set DMA1_Stream3_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream4_IRQHandler
+   .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream5_IRQHandler
+   .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream6_IRQHandler
+   .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
+
+   .weak      ADC_IRQHandler
+   .thumb_set ADC_IRQHandler,Default_Handler
+
+   .weak      CAN1_TX_IRQHandler
+   .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+   .weak      CAN1_RX0_IRQHandler
+   .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+   .weak      CAN1_RX1_IRQHandler
+   .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+   .weak      CAN1_SCE_IRQHandler
+   .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+   .weak      EXTI9_5_IRQHandler
+   .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+   .weak      TIM1_BRK_TIM9_IRQHandler
+   .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+
+   .weak      TIM1_UP_TIM10_IRQHandler
+   .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+   .weak      TIM1_TRG_COM_TIM11_IRQHandler
+   .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+
+   .weak      TIM1_CC_IRQHandler
+   .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+   .weak      TIM2_IRQHandler
+   .thumb_set TIM2_IRQHandler,Default_Handler
+
+   .weak      TIM3_IRQHandler
+   .thumb_set TIM3_IRQHandler,Default_Handler
+
+   .weak      TIM4_IRQHandler
+   .thumb_set TIM4_IRQHandler,Default_Handler
+
+   .weak      I2C1_EV_IRQHandler
+   .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+   .weak      I2C1_ER_IRQHandler
+   .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+   .weak      I2C2_EV_IRQHandler
+   .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+   .weak      I2C2_ER_IRQHandler
+   .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+   .weak      SPI1_IRQHandler
+   .thumb_set SPI1_IRQHandler,Default_Handler
+
+   .weak      SPI2_IRQHandler
+   .thumb_set SPI2_IRQHandler,Default_Handler
+
+   .weak      USART1_IRQHandler
+   .thumb_set USART1_IRQHandler,Default_Handler
+
+   .weak      USART2_IRQHandler
+   .thumb_set USART2_IRQHandler,Default_Handler
+
+   .weak      USART3_IRQHandler
+   .thumb_set USART3_IRQHandler,Default_Handler
+
+   .weak      EXTI15_10_IRQHandler
+   .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+   .weak      RTC_Alarm_IRQHandler
+   .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+   .weak      OTG_FS_WKUP_IRQHandler
+   .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+   .weak      TIM8_BRK_TIM12_IRQHandler
+   .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+
+   .weak      TIM8_UP_TIM13_IRQHandler
+   .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+
+   .weak      TIM8_TRG_COM_TIM14_IRQHandler
+   .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+
+   .weak      TIM8_CC_IRQHandler
+   .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream7_IRQHandler
+   .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
+
+   .weak      FMC_IRQHandler
+   .thumb_set FMC_IRQHandler,Default_Handler
+
+   .weak      SDIO_IRQHandler
+   .thumb_set SDIO_IRQHandler,Default_Handler
+
+   .weak      TIM5_IRQHandler
+   .thumb_set TIM5_IRQHandler,Default_Handler
+
+   .weak      SPI3_IRQHandler
+   .thumb_set SPI3_IRQHandler,Default_Handler
+
+   .weak      UART4_IRQHandler
+   .thumb_set UART4_IRQHandler,Default_Handler
+
+   .weak      UART5_IRQHandler
+   .thumb_set UART5_IRQHandler,Default_Handler
+
+   .weak      TIM6_DAC_IRQHandler
+   .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+   .weak      TIM7_IRQHandler
+   .thumb_set TIM7_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream0_IRQHandler
+   .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream1_IRQHandler
+   .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream2_IRQHandler
+   .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream3_IRQHandler
+   .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream4_IRQHandler
+   .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
+
+   .weak      ETH_IRQHandler
+   .thumb_set ETH_IRQHandler,Default_Handler
+
+   .weak      ETH_WKUP_IRQHandler
+   .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+   .weak      CAN2_TX_IRQHandler
+   .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+   .weak      CAN2_RX0_IRQHandler
+   .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+   .weak      CAN2_RX1_IRQHandler
+   .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+   .weak      CAN2_SCE_IRQHandler
+   .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+   .weak      OTG_FS_IRQHandler
+   .thumb_set OTG_FS_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream5_IRQHandler
+   .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream6_IRQHandler
+   .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream7_IRQHandler
+   .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
+
+   .weak      USART6_IRQHandler
+   .thumb_set USART6_IRQHandler,Default_Handler
+
+   .weak      I2C3_EV_IRQHandler
+   .thumb_set I2C3_EV_IRQHandler,Default_Handler
+
+   .weak      I2C3_ER_IRQHandler
+   .thumb_set I2C3_ER_IRQHandler,Default_Handler
+
+   .weak      OTG_HS_EP1_OUT_IRQHandler
+   .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
+
+   .weak      OTG_HS_EP1_IN_IRQHandler
+   .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
+
+   .weak      OTG_HS_WKUP_IRQHandler
+   .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
+
+   .weak      OTG_HS_IRQHandler
+   .thumb_set OTG_HS_IRQHandler,Default_Handler
+
+   .weak      DCMI_IRQHandler
+   .thumb_set DCMI_IRQHandler,Default_Handler
+
+   .weak      HASH_RNG_IRQHandler
+   .thumb_set HASH_RNG_IRQHandler,Default_Handler
+
+   .weak      FPU_IRQHandler
+   .thumb_set FPU_IRQHandler,Default_Handler
+
+   .weak      UART7_IRQHandler
+   .thumb_set UART7_IRQHandler,Default_Handler
+
+   .weak      UART8_IRQHandler
+   .thumb_set UART8_IRQHandler,Default_Handler
+
+   .weak      SPI4_IRQHandler
+   .thumb_set SPI4_IRQHandler,Default_Handler
+
+   .weak      SPI5_IRQHandler
+   .thumb_set SPI5_IRQHandler,Default_Handler
+
+   .weak      SPI6_IRQHandler
+   .thumb_set SPI6_IRQHandler,Default_Handler
+
+   .weak      SAI1_IRQHandler
+   .thumb_set SAI1_IRQHandler,Default_Handler
+
+   .weak      LTDC_IRQHandler
+   .thumb_set LTDC_IRQHandler,Default_Handler
+
+   .weak      LTDC_ER_IRQHandler
+   .thumb_set LTDC_ER_IRQHandler,Default_Handler
+
+   .weak      DMA2D_IRQHandler
+   .thumb_set DMA2D_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
+
diff --git a/Device/system_stm32f4xx.c b/Device/system_stm32f4xx.c
new file mode 100644
index 0000000..bc78fb2
--- /dev/null
+++ b/Device/system_stm32f4xx.c
@@ -0,0 +1,587 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f4xx.c
+  * @author  MCD Application Team
+  * @version V2.3.2
+  * @date    26-June-2015
+  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f4xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick
+  *                                  timer or configure other parameters.
+  *
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx_system
+  * @{
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Includes
+  * @{
+  */
+
+
+#include "stm32f4xx.h"
+
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM)
+ #error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM "
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field.
+                                   This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+  uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and External memory
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+  /* Reset the RCC clock configuration to the default reset state ------------*/
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset CFGR register */
+  RCC->CFGR = 0x00000000;
+
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset PLLCFGR register */
+  RCC->PLLCFGR = 0x24003010;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Disable all interrupts */
+  RCC->CIR = 0x00000000;
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *
+  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *
+  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+  *              depends on the application requirements), user has to ensure that HSE_VALUE
+  *              is same as the real frequency of the crystal used. Otherwise, this function
+  *              may have wrong result.
+  *
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock source */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock source */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock source */
+
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+         SYSCLK = PLL_VCO / PLL_P
+         */
+      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+      if (pllsource != 0)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+
+      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+      SystemCoreClock = pllvco/pllp;
+      break;
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK frequency --------------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK frequency */
+  SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+#if defined (DATA_IN_ExtSDRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register uint32_t index;
+
+#if defined(STM32F446xx)
+  /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+      clock */
+  RCC->AHB1ENR |= 0x0000007D;
+#else
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
+      clock */
+  RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+#if defined(STM32F446xx)
+  /* Connect PAx pins to FMC Alternate function */
+  GPIOA->AFR[0]  |= 0xC0000000;
+  GPIOA->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOA->MODER   |= 0x00008000;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOA->OSPEEDR |= 0x00008000;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOA->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOA->PUPDR   |= 0x00000000;
+
+  /* Connect PCx pins to FMC Alternate function */
+  GPIOC->AFR[0]  |= 0x00CC0000;
+  GPIOC->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOC->MODER   |= 0x00000A00;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOC->OSPEEDR |= 0x00000A00;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOC->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOC->PUPDR   |= 0x00000000;
+#endif /* STM32F446xx */
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x000000CC;
+  GPIOD->AFR[1]  = 0xCC000CCC;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOD->MODER   = 0xA02A000A;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOD->OSPEEDR = 0xA02A000A;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00000CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */
+  GPIOE->MODER   = 0xAAAA800A;
+  /* Configure PEx pins speed to 50 MHz */
+  GPIOE->OSPEEDR = 0xAAAA800A;
+  /* Configure PEx pins Output type to push-pull */
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */
+  GPIOG->PUPDR   = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */
+  GPIOH->PUPDR   = 0x00000000;
+
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */
+  GPIOI->PUPDR   = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+  FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011;
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Auto refresh command */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x000000F3;
+#else
+  FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* MRD register program */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x00044014;
+#else
+  FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0];
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHB1ENR   |= 0x00000078;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 100 MHz */
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x000000C0;
+  /* Configure PGx pins in Alternate function mode */
+  GPIOG->MODER   = 0x00085AAA;
+  /* Configure PGx pins speed to 100 MHz */
+  GPIOG->OSPEEDR = 0x000CAFFF;
+  /* Configure PGx pins Output type to push-pull */
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */
+  GPIOG->PUPDR   = 0x00000000;
+
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+  /* Enable the FMC/FSMC interface clock */
+  RCC->AHB3ENR         |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FSMC_Bank1->BTCR[2]  = 0x00001011;
+  FSMC_Bank1->BTCR[3]  = 0x00000201;
+  FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+  (void)(tmp);
+}
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f429xx.h b/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f429xx.h
new file mode 100644
index 0000000..4da2c57
--- /dev/null
+++ b/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f429xx.h
@@ -0,0 +1,9037 @@
+/**
+  ******************************************************************************
+  * @file    stm32f429xx.h
+  * @author  MCD Application Team
+  * @version V2.3.2
+  * @date    26-June-2015
+  * @brief   CMSIS STM32F429xx Device Peripheral Access Layer Header File.
+  *
+  *          This file contains:
+  *           - Data structures and the address mapping for all peripherals
+  *           - Peripheral's registers declarations and bits definition
+  *           - Macros to access peripheral�s registers hardware
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS_Device
+  * @{
+  */
+
+/** @addtogroup stm32f429xx
+  * @{
+  */
+
+#ifndef __STM32F429xx_H
+#define __STM32F429xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+  * @{
+  */
+
+/**
+  * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+  */
+#define __CM4_REV                 0x0001  /*!< Core revision r0p1                            */
+#define __MPU_PRESENT             1       /*!< STM32F4XX provides an MPU                     */
+#define __NVIC_PRIO_BITS          4       /*!< STM32F4XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig    0       /*!< Set to 1 if different SysTick Config is used  */
+#define __FPU_PRESENT             1       /*!< FPU present                                   */
+
+/**
+  * @}
+  */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+  * @{
+  */
+
+/**
+ * @brief STM32F4XX Interrupt Number Definition, according to the selected device
+ *        in @ref Library_configuration_section
+ */
+typedef enum
+{
+/******  Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+  NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                                          */
+  MemoryManagement_IRQn       = -12,    /*!< 4 Cortex-M4 Memory Management Interrupt                           */
+  BusFault_IRQn               = -11,    /*!< 5 Cortex-M4 Bus Fault Interrupt                                   */
+  UsageFault_IRQn             = -10,    /*!< 6 Cortex-M4 Usage Fault Interrupt                                 */
+  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M4 SV Call Interrupt                                    */
+  DebugMonitor_IRQn           = -4,     /*!< 12 Cortex-M4 Debug Monitor Interrupt                              */
+  PendSV_IRQn                 = -2,     /*!< 14 Cortex-M4 Pend SV Interrupt                                    */
+  SysTick_IRQn                = -1,     /*!< 15 Cortex-M4 System Tick Interrupt                                */
+/******  STM32 specific Interrupt Numbers **********************************************************************/
+  WWDG_IRQn                   = 0,      /*!< Window WatchDog Interrupt                                         */
+  PVD_IRQn                    = 1,      /*!< PVD through EXTI Line detection Interrupt                         */
+  TAMP_STAMP_IRQn             = 2,      /*!< Tamper and TimeStamp interrupts through the EXTI line             */
+  RTC_WKUP_IRQn               = 3,      /*!< RTC Wakeup interrupt through the EXTI line                        */
+  FLASH_IRQn                  = 4,      /*!< FLASH global Interrupt                                            */
+  RCC_IRQn                    = 5,      /*!< RCC global Interrupt                                              */
+  EXTI0_IRQn                  = 6,      /*!< EXTI Line0 Interrupt                                              */
+  EXTI1_IRQn                  = 7,      /*!< EXTI Line1 Interrupt                                              */
+  EXTI2_IRQn                  = 8,      /*!< EXTI Line2 Interrupt                                              */
+  EXTI3_IRQn                  = 9,      /*!< EXTI Line3 Interrupt                                              */
+  EXTI4_IRQn                  = 10,     /*!< EXTI Line4 Interrupt                                              */
+  DMA1_Stream0_IRQn           = 11,     /*!< DMA1 Stream 0 global Interrupt                                    */
+  DMA1_Stream1_IRQn           = 12,     /*!< DMA1 Stream 1 global Interrupt                                    */
+  DMA1_Stream2_IRQn           = 13,     /*!< DMA1 Stream 2 global Interrupt                                    */
+  DMA1_Stream3_IRQn           = 14,     /*!< DMA1 Stream 3 global Interrupt                                    */
+  DMA1_Stream4_IRQn           = 15,     /*!< DMA1 Stream 4 global Interrupt                                    */
+  DMA1_Stream5_IRQn           = 16,     /*!< DMA1 Stream 5 global Interrupt                                    */
+  DMA1_Stream6_IRQn           = 17,     /*!< DMA1 Stream 6 global Interrupt                                    */
+  ADC_IRQn                    = 18,     /*!< ADC1, ADC2 and ADC3 global Interrupts                             */
+  CAN1_TX_IRQn                = 19,     /*!< CAN1 TX Interrupt                                                 */
+  CAN1_RX0_IRQn               = 20,     /*!< CAN1 RX0 Interrupt                                                */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                                */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                                */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                                     */
+  TIM1_BRK_TIM9_IRQn          = 24,     /*!< TIM1 Break interrupt and TIM9 global interrupt                    */
+  TIM1_UP_TIM10_IRQn          = 25,     /*!< TIM1 Update Interrupt and TIM10 global interrupt                  */
+  TIM1_TRG_COM_TIM11_IRQn     = 26,     /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                                    */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                             */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                             */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                             */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                              */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                              */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                              */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                              */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                             */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                             */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                                           */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                                           */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                                           */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                                   */
+  RTC_Alarm_IRQn              = 41,     /*!< RTC Alarm (A and B) through EXTI Line Interrupt                   */
+  OTG_FS_WKUP_IRQn            = 42,     /*!< USB OTG FS Wakeup through EXTI line interrupt                     */
+  TIM8_BRK_TIM12_IRQn         = 43,     /*!< TIM8 Break Interrupt and TIM12 global interrupt                   */
+  TIM8_UP_TIM13_IRQn          = 44,     /*!< TIM8 Update Interrupt and TIM13 global interrupt                  */
+  TIM8_TRG_COM_TIM14_IRQn     = 45,     /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+  TIM8_CC_IRQn                = 46,     /*!< TIM8 Capture Compare Interrupt                                    */
+  DMA1_Stream7_IRQn           = 47,     /*!< DMA1 Stream7 Interrupt                                            */
+  FMC_IRQn                    = 48,     /*!< FMC global Interrupt                                              */
+  SDIO_IRQn                   = 49,     /*!< SDIO global Interrupt                                             */
+  TIM5_IRQn                   = 50,     /*!< TIM5 global Interrupt                                             */
+  SPI3_IRQn                   = 51,     /*!< SPI3 global Interrupt                                             */
+  UART4_IRQn                  = 52,     /*!< UART4 global Interrupt                                            */
+  UART5_IRQn                  = 53,     /*!< UART5 global Interrupt                                            */
+  TIM6_DAC_IRQn               = 54,     /*!< TIM6 global and DAC1&2 underrun error  interrupts                 */
+  TIM7_IRQn                   = 55,     /*!< TIM7 global interrupt                                             */
+  DMA2_Stream0_IRQn           = 56,     /*!< DMA2 Stream 0 global Interrupt                                    */
+  DMA2_Stream1_IRQn           = 57,     /*!< DMA2 Stream 1 global Interrupt                                    */
+  DMA2_Stream2_IRQn           = 58,     /*!< DMA2 Stream 2 global Interrupt                                    */
+  DMA2_Stream3_IRQn           = 59,     /*!< DMA2 Stream 3 global Interrupt                                    */
+  DMA2_Stream4_IRQn           = 60,     /*!< DMA2 Stream 4 global Interrupt                                    */
+  ETH_IRQn                    = 61,     /*!< Ethernet global Interrupt                                         */
+  ETH_WKUP_IRQn               = 62,     /*!< Ethernet Wakeup through EXTI line Interrupt                       */
+  CAN2_TX_IRQn                = 63,     /*!< CAN2 TX Interrupt                                                 */
+  CAN2_RX0_IRQn               = 64,     /*!< CAN2 RX0 Interrupt                                                */
+  CAN2_RX1_IRQn               = 65,     /*!< CAN2 RX1 Interrupt                                                */
+  CAN2_SCE_IRQn               = 66,     /*!< CAN2 SCE Interrupt                                                */
+  OTG_FS_IRQn                 = 67,     /*!< USB OTG FS global Interrupt                                       */
+  DMA2_Stream5_IRQn           = 68,     /*!< DMA2 Stream 5 global interrupt                                    */
+  DMA2_Stream6_IRQn           = 69,     /*!< DMA2 Stream 6 global interrupt                                    */
+  DMA2_Stream7_IRQn           = 70,     /*!< DMA2 Stream 7 global interrupt                                    */
+  USART6_IRQn                 = 71,     /*!< USART6 global interrupt                                           */
+  I2C3_EV_IRQn                = 72,     /*!< I2C3 event interrupt                                              */
+  I2C3_ER_IRQn                = 73,     /*!< I2C3 error interrupt                                              */
+  OTG_HS_EP1_OUT_IRQn         = 74,     /*!< USB OTG HS End Point 1 Out global interrupt                       */
+  OTG_HS_EP1_IN_IRQn          = 75,     /*!< USB OTG HS End Point 1 In global interrupt                        */
+  OTG_HS_WKUP_IRQn            = 76,     /*!< USB OTG HS Wakeup through EXTI interrupt                          */
+  OTG_HS_IRQn                 = 77,     /*!< USB OTG HS global interrupt                                       */
+  DCMI_IRQn                   = 78,     /*!< DCMI global interrupt                                             */
+  HASH_RNG_IRQn               = 80,     /*!< Hash and RNG global interrupt                                     */
+  FPU_IRQn                    = 81,     /*!< FPU global interrupt                                              */
+  UART7_IRQn                  = 82,     /*!< UART7 global interrupt                                            */
+  UART8_IRQn                  = 83,     /*!< UART8 global interrupt                                            */
+  SPI4_IRQn                   = 84,     /*!< SPI4 global Interrupt                                             */
+  SPI5_IRQn                   = 85,     /*!< SPI5 global Interrupt                                             */
+  SPI6_IRQn                   = 86,     /*!< SPI6 global Interrupt                                             */
+  SAI1_IRQn                   = 87,     /*!< SAI1 global Interrupt                                             */
+  LTDC_IRQn                   = 88,     /*!< LTDC global Interrupt                                              */
+  LTDC_ER_IRQn                = 89,     /*!< LTDC Error global Interrupt                                        */
+  DMA2D_IRQn                  = 90      /*!< DMA2D global Interrupt                                            */
+} IRQn_Type;
+
+/**
+  * @}
+  */
+
+#include "core_cm4.h"             /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f4xx.h"
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+  * @{
+  */
+
+/**
+  * @brief Analog to Digital Converter
+  */
+
+typedef struct
+{
+  __IO uint32_t SR;     /*!< ADC status register,                         Address offset: 0x00 */
+  __IO uint32_t CR1;    /*!< ADC control register 1,                      Address offset: 0x04 */
+  __IO uint32_t CR2;    /*!< ADC control register 2,                      Address offset: 0x08 */
+  __IO uint32_t SMPR1;  /*!< ADC sample time register 1,                  Address offset: 0x0C */
+  __IO uint32_t SMPR2;  /*!< ADC sample time register 2,                  Address offset: 0x10 */
+  __IO uint32_t JOFR1;  /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+  __IO uint32_t JOFR2;  /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+  __IO uint32_t JOFR3;  /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+  __IO uint32_t JOFR4;  /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+  __IO uint32_t HTR;    /*!< ADC watchdog higher threshold register,      Address offset: 0x24 */
+  __IO uint32_t LTR;    /*!< ADC watchdog lower threshold register,       Address offset: 0x28 */
+  __IO uint32_t SQR1;   /*!< ADC regular sequence register 1,             Address offset: 0x2C */
+  __IO uint32_t SQR2;   /*!< ADC regular sequence register 2,             Address offset: 0x30 */
+  __IO uint32_t SQR3;   /*!< ADC regular sequence register 3,             Address offset: 0x34 */
+  __IO uint32_t JSQR;   /*!< ADC injected sequence register,              Address offset: 0x38*/
+  __IO uint32_t JDR1;   /*!< ADC injected data register 1,                Address offset: 0x3C */
+  __IO uint32_t JDR2;   /*!< ADC injected data register 2,                Address offset: 0x40 */
+  __IO uint32_t JDR3;   /*!< ADC injected data register 3,                Address offset: 0x44 */
+  __IO uint32_t JDR4;   /*!< ADC injected data register 4,                Address offset: 0x48 */
+  __IO uint32_t DR;     /*!< ADC regular data register,                   Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t CSR;    /*!< ADC Common status register,                  Address offset: ADC1 base address + 0x300 */
+  __IO uint32_t CCR;    /*!< ADC common control register,                 Address offset: ADC1 base address + 0x304 */
+  __IO uint32_t CDR;    /*!< ADC common regular data register for dual
+                             AND triple modes,                            Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+
+/**
+  * @brief Controller Area Network TxMailBox
+  */
+
+typedef struct
+{
+  __IO uint32_t TIR;  /*!< CAN TX mailbox identifier register */
+  __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+  __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+  __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+  * @brief Controller Area Network FIFOMailBox
+  */
+
+typedef struct
+{
+  __IO uint32_t RIR;  /*!< CAN receive FIFO mailbox identifier register */
+  __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+  __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+  __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+  * @brief Controller Area Network FilterRegister
+  */
+
+typedef struct
+{
+  __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+  __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+  * @brief Controller Area Network
+  */
+
+typedef struct
+{
+  __IO uint32_t              MCR;                 /*!< CAN master control register,         Address offset: 0x00          */
+  __IO uint32_t              MSR;                 /*!< CAN master status register,          Address offset: 0x04          */
+  __IO uint32_t              TSR;                 /*!< CAN transmit status register,        Address offset: 0x08          */
+  __IO uint32_t              RF0R;                /*!< CAN receive FIFO 0 register,         Address offset: 0x0C          */
+  __IO uint32_t              RF1R;                /*!< CAN receive FIFO 1 register,         Address offset: 0x10          */
+  __IO uint32_t              IER;                 /*!< CAN interrupt enable register,       Address offset: 0x14          */
+  __IO uint32_t              ESR;                 /*!< CAN error status register,           Address offset: 0x18          */
+  __IO uint32_t              BTR;                 /*!< CAN bit timing register,             Address offset: 0x1C          */
+  uint32_t                   RESERVED0[88];       /*!< Reserved, 0x020 - 0x17F                                            */
+  CAN_TxMailBox_TypeDef      sTxMailBox[3];       /*!< CAN Tx MailBox,                      Address offset: 0x180 - 0x1AC */
+  CAN_FIFOMailBox_TypeDef    sFIFOMailBox[2];     /*!< CAN FIFO MailBox,                    Address offset: 0x1B0 - 0x1CC */
+  uint32_t                   RESERVED1[12];       /*!< Reserved, 0x1D0 - 0x1FF                                            */
+  __IO uint32_t              FMR;                 /*!< CAN filter master register,          Address offset: 0x200         */
+  __IO uint32_t              FM1R;                /*!< CAN filter mode register,            Address offset: 0x204         */
+  uint32_t                   RESERVED2;           /*!< Reserved, 0x208                                                    */
+  __IO uint32_t              FS1R;                /*!< CAN filter scale register,           Address offset: 0x20C         */
+  uint32_t                   RESERVED3;           /*!< Reserved, 0x210                                                    */
+  __IO uint32_t              FFA1R;               /*!< CAN filter FIFO assignment register, Address offset: 0x214         */
+  uint32_t                   RESERVED4;           /*!< Reserved, 0x218                                                    */
+  __IO uint32_t              FA1R;                /*!< CAN filter activation register,      Address offset: 0x21C         */
+  uint32_t                   RESERVED5[8];        /*!< Reserved, 0x220-0x23F                                              */
+  CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register,                 Address offset: 0x240-0x31C   */
+} CAN_TypeDef;
+
+/**
+  * @brief CRC calculation unit
+  */
+
+typedef struct
+{
+  __IO uint32_t DR;         /*!< CRC Data register,             Address offset: 0x00 */
+  __IO uint8_t  IDR;        /*!< CRC Independent data register, Address offset: 0x04 */
+  uint8_t       RESERVED0;  /*!< Reserved, 0x05                                      */
+  uint16_t      RESERVED1;  /*!< Reserved, 0x06                                      */
+  __IO uint32_t CR;         /*!< CRC Control register,          Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+  * @brief Digital to Analog Converter
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;       /*!< DAC control register,                                    Address offset: 0x00 */
+  __IO uint32_t SWTRIGR;  /*!< DAC software trigger register,                           Address offset: 0x04 */
+  __IO uint32_t DHR12R1;  /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+  __IO uint32_t DHR12L1;  /*!< DAC channel1 12-bit left aligned data holding register,  Address offset: 0x0C */
+  __IO uint32_t DHR8R1;   /*!< DAC channel1 8-bit right aligned data holding register,  Address offset: 0x10 */
+  __IO uint32_t DHR12R2;  /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+  __IO uint32_t DHR12L2;  /*!< DAC channel2 12-bit left aligned data holding register,  Address offset: 0x18 */
+  __IO uint32_t DHR8R2;   /*!< DAC channel2 8-bit right-aligned data holding register,  Address offset: 0x1C */
+  __IO uint32_t DHR12RD;  /*!< Dual DAC 12-bit right-aligned data holding register,     Address offset: 0x20 */
+  __IO uint32_t DHR12LD;  /*!< DUAL DAC 12-bit left aligned data holding register,      Address offset: 0x24 */
+  __IO uint32_t DHR8RD;   /*!< DUAL DAC 8-bit right aligned data holding register,      Address offset: 0x28 */
+  __IO uint32_t DOR1;     /*!< DAC channel1 data output register,                       Address offset: 0x2C */
+  __IO uint32_t DOR2;     /*!< DAC channel2 data output register,                       Address offset: 0x30 */
+  __IO uint32_t SR;       /*!< DAC status register,                                     Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+  * @brief Debug MCU
+  */
+
+typedef struct
+{
+  __IO uint32_t IDCODE;  /*!< MCU device ID code,               Address offset: 0x00 */
+  __IO uint32_t CR;      /*!< Debug MCU configuration register, Address offset: 0x04 */
+  __IO uint32_t APB1FZ;  /*!< Debug MCU APB1 freeze register,   Address offset: 0x08 */
+  __IO uint32_t APB2FZ;  /*!< Debug MCU APB2 freeze register,   Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+  * @brief DCMI
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;       /*!< DCMI control register 1,                       Address offset: 0x00 */
+  __IO uint32_t SR;       /*!< DCMI status register,                          Address offset: 0x04 */
+  __IO uint32_t RISR;     /*!< DCMI raw interrupt status register,            Address offset: 0x08 */
+  __IO uint32_t IER;      /*!< DCMI interrupt enable register,                Address offset: 0x0C */
+  __IO uint32_t MISR;     /*!< DCMI masked interrupt status register,         Address offset: 0x10 */
+  __IO uint32_t ICR;      /*!< DCMI interrupt clear register,                 Address offset: 0x14 */
+  __IO uint32_t ESCR;     /*!< DCMI embedded synchronization code register,   Address offset: 0x18 */
+  __IO uint32_t ESUR;     /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */
+  __IO uint32_t CWSTRTR;  /*!< DCMI crop window start,                        Address offset: 0x20 */
+  __IO uint32_t CWSIZER;  /*!< DCMI crop window size,                         Address offset: 0x24 */
+  __IO uint32_t DR;       /*!< DCMI data register,                            Address offset: 0x28 */
+} DCMI_TypeDef;
+
+/**
+  * @brief DMA Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;     /*!< DMA stream x configuration register      */
+  __IO uint32_t NDTR;   /*!< DMA stream x number of data register     */
+  __IO uint32_t PAR;    /*!< DMA stream x peripheral address register */
+  __IO uint32_t M0AR;   /*!< DMA stream x memory 0 address register   */
+  __IO uint32_t M1AR;   /*!< DMA stream x memory 1 address register   */
+  __IO uint32_t FCR;    /*!< DMA stream x FIFO control register       */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t LISR;   /*!< DMA low interrupt status register,      Address offset: 0x00 */
+  __IO uint32_t HISR;   /*!< DMA high interrupt status register,     Address offset: 0x04 */
+  __IO uint32_t LIFCR;  /*!< DMA low interrupt flag clear register,  Address offset: 0x08 */
+  __IO uint32_t HIFCR;  /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+/**
+  * @brief DMA2D Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;            /*!< DMA2D Control Register,                         Address offset: 0x00 */
+  __IO uint32_t ISR;           /*!< DMA2D Interrupt Status Register,                Address offset: 0x04 */
+  __IO uint32_t IFCR;          /*!< DMA2D Interrupt Flag Clear Register,            Address offset: 0x08 */
+  __IO uint32_t FGMAR;         /*!< DMA2D Foreground Memory Address Register,       Address offset: 0x0C */
+  __IO uint32_t FGOR;          /*!< DMA2D Foreground Offset Register,               Address offset: 0x10 */
+  __IO uint32_t BGMAR;         /*!< DMA2D Background Memory Address Register,       Address offset: 0x14 */
+  __IO uint32_t BGOR;          /*!< DMA2D Background Offset Register,               Address offset: 0x18 */
+  __IO uint32_t FGPFCCR;       /*!< DMA2D Foreground PFC Control Register,          Address offset: 0x1C */
+  __IO uint32_t FGCOLR;        /*!< DMA2D Foreground Color Register,                Address offset: 0x20 */
+  __IO uint32_t BGPFCCR;       /*!< DMA2D Background PFC Control Register,          Address offset: 0x24 */
+  __IO uint32_t BGCOLR;        /*!< DMA2D Background Color Register,                Address offset: 0x28 */
+  __IO uint32_t FGCMAR;        /*!< DMA2D Foreground CLUT Memory Address Register,  Address offset: 0x2C */
+  __IO uint32_t BGCMAR;        /*!< DMA2D Background CLUT Memory Address Register,  Address offset: 0x30 */
+  __IO uint32_t OPFCCR;        /*!< DMA2D Output PFC Control Register,              Address offset: 0x34 */
+  __IO uint32_t OCOLR;         /*!< DMA2D Output Color Register,                    Address offset: 0x38 */
+  __IO uint32_t OMAR;          /*!< DMA2D Output Memory Address Register,           Address offset: 0x3C */
+  __IO uint32_t OOR;           /*!< DMA2D Output Offset Register,                   Address offset: 0x40 */
+  __IO uint32_t NLR;           /*!< DMA2D Number of Line Register,                  Address offset: 0x44 */
+  __IO uint32_t LWR;           /*!< DMA2D Line Watermark Register,                  Address offset: 0x48 */
+  __IO uint32_t AMTCR;         /*!< DMA2D AHB Master Timer Configuration Register,  Address offset: 0x4C */
+  uint32_t      RESERVED[236]; /*!< Reserved, 0x50-0x3FF */
+  __IO uint32_t FGCLUT[256];   /*!< DMA2D Foreground CLUT,                          Address offset:400-7FF */
+  __IO uint32_t BGCLUT[256];   /*!< DMA2D Background CLUT,                          Address offset:800-BFF */
+} DMA2D_TypeDef;
+
+/**
+  * @brief Ethernet MAC
+  */
+
+typedef struct
+{
+  __IO uint32_t MACCR;
+  __IO uint32_t MACFFR;
+  __IO uint32_t MACHTHR;
+  __IO uint32_t MACHTLR;
+  __IO uint32_t MACMIIAR;
+  __IO uint32_t MACMIIDR;
+  __IO uint32_t MACFCR;
+  __IO uint32_t MACVLANTR;             /*    8 */
+  uint32_t      RESERVED0[2];
+  __IO uint32_t MACRWUFFR;             /*   11 */
+  __IO uint32_t MACPMTCSR;
+  uint32_t      RESERVED1[2];
+  __IO uint32_t MACSR;                 /*   15 */
+  __IO uint32_t MACIMR;
+  __IO uint32_t MACA0HR;
+  __IO uint32_t MACA0LR;
+  __IO uint32_t MACA1HR;
+  __IO uint32_t MACA1LR;
+  __IO uint32_t MACA2HR;
+  __IO uint32_t MACA2LR;
+  __IO uint32_t MACA3HR;
+  __IO uint32_t MACA3LR;               /*   24 */
+  uint32_t      RESERVED2[40];
+  __IO uint32_t MMCCR;                 /*   65 */
+  __IO uint32_t MMCRIR;
+  __IO uint32_t MMCTIR;
+  __IO uint32_t MMCRIMR;
+  __IO uint32_t MMCTIMR;               /*   69 */
+  uint32_t      RESERVED3[14];
+  __IO uint32_t MMCTGFSCCR;            /*   84 */
+  __IO uint32_t MMCTGFMSCCR;
+  uint32_t      RESERVED4[5];
+  __IO uint32_t MMCTGFCR;
+  uint32_t      RESERVED5[10];
+  __IO uint32_t MMCRFCECR;
+  __IO uint32_t MMCRFAECR;
+  uint32_t      RESERVED6[10];
+  __IO uint32_t MMCRGUFCR;
+  uint32_t      RESERVED7[334];
+  __IO uint32_t PTPTSCR;
+  __IO uint32_t PTPSSIR;
+  __IO uint32_t PTPTSHR;
+  __IO uint32_t PTPTSLR;
+  __IO uint32_t PTPTSHUR;
+  __IO uint32_t PTPTSLUR;
+  __IO uint32_t PTPTSAR;
+  __IO uint32_t PTPTTHR;
+  __IO uint32_t PTPTTLR;
+  __IO uint32_t RESERVED8;
+  __IO uint32_t PTPTSSR;
+  uint32_t      RESERVED9[565];
+  __IO uint32_t DMABMR;
+  __IO uint32_t DMATPDR;
+  __IO uint32_t DMARPDR;
+  __IO uint32_t DMARDLAR;
+  __IO uint32_t DMATDLAR;
+  __IO uint32_t DMASR;
+  __IO uint32_t DMAOMR;
+  __IO uint32_t DMAIER;
+  __IO uint32_t DMAMFBOCR;
+  __IO uint32_t DMARSWTR;
+  uint32_t      RESERVED10[8];
+  __IO uint32_t DMACHTDR;
+  __IO uint32_t DMACHRDR;
+  __IO uint32_t DMACHTBAR;
+  __IO uint32_t DMACHRBAR;
+} ETH_TypeDef;
+
+/**
+  * @brief External Interrupt/Event Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t IMR;    /*!< EXTI Interrupt mask register,            Address offset: 0x00 */
+  __IO uint32_t EMR;    /*!< EXTI Event mask register,                Address offset: 0x04 */
+  __IO uint32_t RTSR;   /*!< EXTI Rising trigger selection register,  Address offset: 0x08 */
+  __IO uint32_t FTSR;   /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+  __IO uint32_t SWIER;  /*!< EXTI Software interrupt event register,  Address offset: 0x10 */
+  __IO uint32_t PR;     /*!< EXTI Pending register,                   Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+  * @brief FLASH Registers
+  */
+
+typedef struct
+{
+  __IO uint32_t ACR;      /*!< FLASH access control register,   Address offset: 0x00 */
+  __IO uint32_t KEYR;     /*!< FLASH key register,              Address offset: 0x04 */
+  __IO uint32_t OPTKEYR;  /*!< FLASH option key register,       Address offset: 0x08 */
+  __IO uint32_t SR;       /*!< FLASH status register,           Address offset: 0x0C */
+  __IO uint32_t CR;       /*!< FLASH control register,          Address offset: 0x10 */
+  __IO uint32_t OPTCR;    /*!< FLASH option control register ,  Address offset: 0x14 */
+  __IO uint32_t OPTCR1;   /*!< FLASH option control register 1, Address offset: 0x18 */
+} FLASH_TypeDef;
+
+/**
+  * @brief Flexible Memory Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t BTCR[8];    /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */
+} FMC_Bank1_TypeDef;
+
+/**
+  * @brief Flexible Memory Controller Bank1E
+  */
+
+typedef struct
+{
+  __IO uint32_t BWTR[7];    /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FMC_Bank1E_TypeDef;
+
+/**
+  * @brief Flexible Memory Controller Bank2
+  */
+
+typedef struct
+{
+  __IO uint32_t PCR2;       /*!< NAND Flash control register 2,                       Address offset: 0x60 */
+  __IO uint32_t SR2;        /*!< NAND Flash FIFO status and interrupt register 2,     Address offset: 0x64 */
+  __IO uint32_t PMEM2;      /*!< NAND Flash Common memory space timing register 2,    Address offset: 0x68 */
+  __IO uint32_t PATT2;      /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */
+  uint32_t      RESERVED0;  /*!< Reserved, 0x70                                                            */
+  __IO uint32_t ECCR2;      /*!< NAND Flash ECC result registers 2,                   Address offset: 0x74 */
+  uint32_t      RESERVED1;  /*!< Reserved, 0x78                                                            */
+  uint32_t      RESERVED2;  /*!< Reserved, 0x7C                                                            */
+  __IO uint32_t PCR3;       /*!< NAND Flash control register 3,                       Address offset: 0x80 */
+  __IO uint32_t SR3;        /*!< NAND Flash FIFO status and interrupt register 3,     Address offset: 0x84 */
+  __IO uint32_t PMEM3;      /*!< NAND Flash Common memory space timing register 3,    Address offset: 0x88 */
+  __IO uint32_t PATT3;      /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */
+  uint32_t      RESERVED3;  /*!< Reserved, 0x90                                                            */
+  __IO uint32_t ECCR3;      /*!< NAND Flash ECC result registers 3,                   Address offset: 0x94 */
+} FMC_Bank2_3_TypeDef;
+
+/**
+  * @brief Flexible Memory Controller Bank4
+  */
+
+typedef struct
+{
+  __IO uint32_t PCR4;       /*!< PC Card  control register 4,                       Address offset: 0xA0 */
+  __IO uint32_t SR4;        /*!< PC Card  FIFO status and interrupt register 4,     Address offset: 0xA4 */
+  __IO uint32_t PMEM4;      /*!< PC Card  Common memory space timing register 4,    Address offset: 0xA8 */
+  __IO uint32_t PATT4;      /*!< PC Card  Attribute memory space timing register 4, Address offset: 0xAC */
+  __IO uint32_t PIO4;       /*!< PC Card  I/O space timing register 4,              Address offset: 0xB0 */
+} FMC_Bank4_TypeDef;
+
+/**
+  * @brief Flexible Memory Controller Bank5_6
+  */
+
+typedef struct
+{
+  __IO uint32_t SDCR[2];        /*!< SDRAM Control registers ,      Address offset: 0x140-0x144  */
+  __IO uint32_t SDTR[2];        /*!< SDRAM Timing registers ,       Address offset: 0x148-0x14C  */
+  __IO uint32_t SDCMR;       /*!< SDRAM Command Mode register,    Address offset: 0x150  */
+  __IO uint32_t SDRTR;       /*!< SDRAM Refresh Timer register,   Address offset: 0x154  */
+  __IO uint32_t SDSR;        /*!< SDRAM Status register,          Address offset: 0x158  */
+} FMC_Bank5_6_TypeDef;
+
+/**
+  * @brief General Purpose I/O
+  */
+
+typedef struct
+{
+  __IO uint32_t MODER;    /*!< GPIO port mode register,               Address offset: 0x00      */
+  __IO uint32_t OTYPER;   /*!< GPIO port output type register,        Address offset: 0x04      */
+  __IO uint32_t OSPEEDR;  /*!< GPIO port output speed register,       Address offset: 0x08      */
+  __IO uint32_t PUPDR;    /*!< GPIO port pull-up/pull-down register,  Address offset: 0x0C      */
+  __IO uint32_t IDR;      /*!< GPIO port input data register,         Address offset: 0x10      */
+  __IO uint32_t ODR;      /*!< GPIO port output data register,        Address offset: 0x14      */
+  __IO uint32_t BSRR;     /*!< GPIO port bit set/reset register,      Address offset: 0x18      */
+  __IO uint32_t LCKR;     /*!< GPIO port configuration lock register, Address offset: 0x1C      */
+  __IO uint32_t AFR[2];   /*!< GPIO alternate function registers,     Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+  * @brief System configuration controller
+  */
+
+typedef struct
+{
+  __IO uint32_t MEMRMP;       /*!< SYSCFG memory remap register,                      Address offset: 0x00      */
+  __IO uint32_t PMC;          /*!< SYSCFG peripheral mode configuration register,     Address offset: 0x04      */
+  __IO uint32_t EXTICR[4];    /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+  uint32_t      RESERVED[2];  /*!< Reserved, 0x18-0x1C                                                          */
+  __IO uint32_t CMPCR;        /*!< SYSCFG Compensation cell control register,         Address offset: 0x20      */
+} SYSCFG_TypeDef;
+
+/**
+  * @brief Inter-integrated Circuit Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t CR1;        /*!< I2C Control register 1,     Address offset: 0x00 */
+  __IO uint32_t CR2;        /*!< I2C Control register 2,     Address offset: 0x04 */
+  __IO uint32_t OAR1;       /*!< I2C Own address register 1, Address offset: 0x08 */
+  __IO uint32_t OAR2;       /*!< I2C Own address register 2, Address offset: 0x0C */
+  __IO uint32_t DR;         /*!< I2C Data register,          Address offset: 0x10 */
+  __IO uint32_t SR1;        /*!< I2C Status register 1,      Address offset: 0x14 */
+  __IO uint32_t SR2;        /*!< I2C Status register 2,      Address offset: 0x18 */
+  __IO uint32_t CCR;        /*!< I2C Clock control register, Address offset: 0x1C */
+  __IO uint32_t TRISE;      /*!< I2C TRISE register,         Address offset: 0x20 */
+  __IO uint32_t FLTR;       /*!< I2C FLTR register,          Address offset: 0x24 */
+} I2C_TypeDef;
+
+/**
+  * @brief Independent WATCHDOG
+  */
+
+typedef struct
+{
+  __IO uint32_t KR;   /*!< IWDG Key register,       Address offset: 0x00 */
+  __IO uint32_t PR;   /*!< IWDG Prescaler register, Address offset: 0x04 */
+  __IO uint32_t RLR;  /*!< IWDG Reload register,    Address offset: 0x08 */
+  __IO uint32_t SR;   /*!< IWDG Status register,    Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+  * @brief LCD-TFT Display Controller
+  */
+
+typedef struct
+{
+  uint32_t      RESERVED0[2];  /*!< Reserved, 0x00-0x04 */
+  __IO uint32_t SSCR;          /*!< LTDC Synchronization Size Configuration Register,    Address offset: 0x08 */
+  __IO uint32_t BPCR;          /*!< LTDC Back Porch Configuration Register,              Address offset: 0x0C */
+  __IO uint32_t AWCR;          /*!< LTDC Active Width Configuration Register,            Address offset: 0x10 */
+  __IO uint32_t TWCR;          /*!< LTDC Total Width Configuration Register,             Address offset: 0x14 */
+  __IO uint32_t GCR;           /*!< LTDC Global Control Register,                        Address offset: 0x18 */
+  uint32_t      RESERVED1[2];  /*!< Reserved, 0x1C-0x20 */
+  __IO uint32_t SRCR;          /*!< LTDC Shadow Reload Configuration Register,           Address offset: 0x24 */
+  uint32_t      RESERVED2[1];  /*!< Reserved, 0x28 */
+  __IO uint32_t BCCR;          /*!< LTDC Background Color Configuration Register,        Address offset: 0x2C */
+  uint32_t      RESERVED3[1];  /*!< Reserved, 0x30 */
+  __IO uint32_t IER;           /*!< LTDC Interrupt Enable Register,                      Address offset: 0x34 */
+  __IO uint32_t ISR;           /*!< LTDC Interrupt Status Register,                      Address offset: 0x38 */
+  __IO uint32_t ICR;           /*!< LTDC Interrupt Clear Register,                       Address offset: 0x3C */
+  __IO uint32_t LIPCR;         /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */
+  __IO uint32_t CPSR;          /*!< LTDC Current Position Status Register,               Address offset: 0x44 */
+  __IO uint32_t CDSR;         /*!< LTDC Current Display Status Register,                       Address offset: 0x48 */
+} LTDC_TypeDef;
+
+/**
+  * @brief LCD-TFT Display layer x Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;            /*!< LTDC Layerx Control Register                                  Address offset: 0x84 */
+  __IO uint32_t WHPCR;         /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */
+  __IO uint32_t WVPCR;         /*!< LTDC Layerx Window Vertical Position Configuration Register   Address offset: 0x8C */
+  __IO uint32_t CKCR;          /*!< LTDC Layerx Color Keying Configuration Register               Address offset: 0x90 */
+  __IO uint32_t PFCR;          /*!< LTDC Layerx Pixel Format Configuration Register               Address offset: 0x94 */
+  __IO uint32_t CACR;          /*!< LTDC Layerx Constant Alpha Configuration Register             Address offset: 0x98 */
+  __IO uint32_t DCCR;          /*!< LTDC Layerx Default Color Configuration Register              Address offset: 0x9C */
+  __IO uint32_t BFCR;          /*!< LTDC Layerx Blending Factors Configuration Register           Address offset: 0xA0 */
+  uint32_t      RESERVED0[2];  /*!< Reserved */
+  __IO uint32_t CFBAR;         /*!< LTDC Layerx Color Frame Buffer Address Register               Address offset: 0xAC */
+  __IO uint32_t CFBLR;         /*!< LTDC Layerx Color Frame Buffer Length Register                Address offset: 0xB0 */
+  __IO uint32_t CFBLNR;        /*!< LTDC Layerx ColorFrame Buffer Line Number Register            Address offset: 0xB4 */
+  uint32_t      RESERVED1[3];  /*!< Reserved */
+  __IO uint32_t CLUTWR;         /*!< LTDC Layerx CLUT Write Register                               Address offset: 0x144 */
+
+} LTDC_Layer_TypeDef;
+
+/**
+  * @brief Power Control
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;   /*!< PWR power control register,        Address offset: 0x00 */
+  __IO uint32_t CSR;  /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+  * @brief Reset and Clock Control
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;            /*!< RCC clock control register,                                  Address offset: 0x00 */
+  __IO uint32_t PLLCFGR;       /*!< RCC PLL configuration register,                              Address offset: 0x04 */
+  __IO uint32_t CFGR;          /*!< RCC clock configuration register,                            Address offset: 0x08 */
+  __IO uint32_t CIR;           /*!< RCC clock interrupt register,                                Address offset: 0x0C */
+  __IO uint32_t AHB1RSTR;      /*!< RCC AHB1 peripheral reset register,                          Address offset: 0x10 */
+  __IO uint32_t AHB2RSTR;      /*!< RCC AHB2 peripheral reset register,                          Address offset: 0x14 */
+  __IO uint32_t AHB3RSTR;      /*!< RCC AHB3 peripheral reset register,                          Address offset: 0x18 */
+  uint32_t      RESERVED0;     /*!< Reserved, 0x1C                                                                    */
+  __IO uint32_t APB1RSTR;      /*!< RCC APB1 peripheral reset register,                          Address offset: 0x20 */
+  __IO uint32_t APB2RSTR;      /*!< RCC APB2 peripheral reset register,                          Address offset: 0x24 */
+  uint32_t      RESERVED1[2];  /*!< Reserved, 0x28-0x2C                                                               */
+  __IO uint32_t AHB1ENR;       /*!< RCC AHB1 peripheral clock register,                          Address offset: 0x30 */
+  __IO uint32_t AHB2ENR;       /*!< RCC AHB2 peripheral clock register,                          Address offset: 0x34 */
+  __IO uint32_t AHB3ENR;       /*!< RCC AHB3 peripheral clock register,                          Address offset: 0x38 */
+  uint32_t      RESERVED2;     /*!< Reserved, 0x3C                                                                    */
+  __IO uint32_t APB1ENR;       /*!< RCC APB1 peripheral clock enable register,                   Address offset: 0x40 */
+  __IO uint32_t APB2ENR;       /*!< RCC APB2 peripheral clock enable register,                   Address offset: 0x44 */
+  uint32_t      RESERVED3[2];  /*!< Reserved, 0x48-0x4C                                                               */
+  __IO uint32_t AHB1LPENR;     /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+  __IO uint32_t AHB2LPENR;     /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+  __IO uint32_t AHB3LPENR;     /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+  uint32_t      RESERVED4;     /*!< Reserved, 0x5C                                                                    */
+  __IO uint32_t APB1LPENR;     /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+  __IO uint32_t APB2LPENR;     /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+  uint32_t      RESERVED5[2];  /*!< Reserved, 0x68-0x6C                                                               */
+  __IO uint32_t BDCR;          /*!< RCC Backup domain control register,                          Address offset: 0x70 */
+  __IO uint32_t CSR;           /*!< RCC clock control & status register,                         Address offset: 0x74 */
+  uint32_t      RESERVED6[2];  /*!< Reserved, 0x78-0x7C                                                               */
+  __IO uint32_t SSCGR;         /*!< RCC spread spectrum clock generation register,               Address offset: 0x80 */
+  __IO uint32_t PLLI2SCFGR;    /*!< RCC PLLI2S configuration register,                           Address offset: 0x84 */
+  __IO uint32_t PLLSAICFGR;    /*!< RCC PLLSAI configuration register,                           Address offset: 0x88 */
+  __IO uint32_t DCKCFGR;       /*!< RCC Dedicated Clocks configuration register,                 Address offset: 0x8C */
+
+} RCC_TypeDef;
+
+/**
+  * @brief Real-Time Clock
+  */
+
+typedef struct
+{
+  __IO uint32_t TR;      /*!< RTC time register,                                        Address offset: 0x00 */
+  __IO uint32_t DR;      /*!< RTC date register,                                        Address offset: 0x04 */
+  __IO uint32_t CR;      /*!< RTC control register,                                     Address offset: 0x08 */
+  __IO uint32_t ISR;     /*!< RTC initialization and status register,                   Address offset: 0x0C */
+  __IO uint32_t PRER;    /*!< RTC prescaler register,                                   Address offset: 0x10 */
+  __IO uint32_t WUTR;    /*!< RTC wakeup timer register,                                Address offset: 0x14 */
+  __IO uint32_t CALIBR;  /*!< RTC calibration register,                                 Address offset: 0x18 */
+  __IO uint32_t ALRMAR;  /*!< RTC alarm A register,                                     Address offset: 0x1C */
+  __IO uint32_t ALRMBR;  /*!< RTC alarm B register,                                     Address offset: 0x20 */
+  __IO uint32_t WPR;     /*!< RTC write protection register,                            Address offset: 0x24 */
+  __IO uint32_t SSR;     /*!< RTC sub second register,                                  Address offset: 0x28 */
+  __IO uint32_t SHIFTR;  /*!< RTC shift control register,                               Address offset: 0x2C */
+  __IO uint32_t TSTR;    /*!< RTC time stamp time register,                             Address offset: 0x30 */
+  __IO uint32_t TSDR;    /*!< RTC time stamp date register,                             Address offset: 0x34 */
+  __IO uint32_t TSSSR;   /*!< RTC time-stamp sub second register,                       Address offset: 0x38 */
+  __IO uint32_t CALR;    /*!< RTC calibration register,                                 Address offset: 0x3C */
+  __IO uint32_t TAFCR;   /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+  __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register,                          Address offset: 0x44 */
+  __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register,                          Address offset: 0x48 */
+  uint32_t RESERVED7;    /*!< Reserved, 0x4C                                                                 */
+  __IO uint32_t BKP0R;   /*!< RTC backup register 1,                                    Address offset: 0x50 */
+  __IO uint32_t BKP1R;   /*!< RTC backup register 1,                                    Address offset: 0x54 */
+  __IO uint32_t BKP2R;   /*!< RTC backup register 2,                                    Address offset: 0x58 */
+  __IO uint32_t BKP3R;   /*!< RTC backup register 3,                                    Address offset: 0x5C */
+  __IO uint32_t BKP4R;   /*!< RTC backup register 4,                                    Address offset: 0x60 */
+  __IO uint32_t BKP5R;   /*!< RTC backup register 5,                                    Address offset: 0x64 */
+  __IO uint32_t BKP6R;   /*!< RTC backup register 6,                                    Address offset: 0x68 */
+  __IO uint32_t BKP7R;   /*!< RTC backup register 7,                                    Address offset: 0x6C */
+  __IO uint32_t BKP8R;   /*!< RTC backup register 8,                                    Address offset: 0x70 */
+  __IO uint32_t BKP9R;   /*!< RTC backup register 9,                                    Address offset: 0x74 */
+  __IO uint32_t BKP10R;  /*!< RTC backup register 10,                                   Address offset: 0x78 */
+  __IO uint32_t BKP11R;  /*!< RTC backup register 11,                                   Address offset: 0x7C */
+  __IO uint32_t BKP12R;  /*!< RTC backup register 12,                                   Address offset: 0x80 */
+  __IO uint32_t BKP13R;  /*!< RTC backup register 13,                                   Address offset: 0x84 */
+  __IO uint32_t BKP14R;  /*!< RTC backup register 14,                                   Address offset: 0x88 */
+  __IO uint32_t BKP15R;  /*!< RTC backup register 15,                                   Address offset: 0x8C */
+  __IO uint32_t BKP16R;  /*!< RTC backup register 16,                                   Address offset: 0x90 */
+  __IO uint32_t BKP17R;  /*!< RTC backup register 17,                                   Address offset: 0x94 */
+  __IO uint32_t BKP18R;  /*!< RTC backup register 18,                                   Address offset: 0x98 */
+  __IO uint32_t BKP19R;  /*!< RTC backup register 19,                                   Address offset: 0x9C */
+} RTC_TypeDef;
+
+/**
+  * @brief Serial Audio Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t GCR;      /*!< SAI global configuration register,        Address offset: 0x00 */
+} SAI_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t CR1;      /*!< SAI block x configuration register 1,     Address offset: 0x04 */
+  __IO uint32_t CR2;      /*!< SAI block x configuration register 2,     Address offset: 0x08 */
+  __IO uint32_t FRCR;     /*!< SAI block x frame configuration register, Address offset: 0x0C */
+  __IO uint32_t SLOTR;    /*!< SAI block x slot register,                Address offset: 0x10 */
+  __IO uint32_t IMR;      /*!< SAI block x interrupt mask register,      Address offset: 0x14 */
+  __IO uint32_t SR;       /*!< SAI block x status register,              Address offset: 0x18 */
+  __IO uint32_t CLRFR;    /*!< SAI block x clear flag register,          Address offset: 0x1C */
+  __IO uint32_t DR;       /*!< SAI block x data register,                Address offset: 0x20 */
+} SAI_Block_TypeDef;
+
+/**
+  * @brief SD host Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t POWER;          /*!< SDIO power control register,    Address offset: 0x00 */
+  __IO uint32_t CLKCR;          /*!< SDI clock control register,     Address offset: 0x04 */
+  __IO uint32_t ARG;            /*!< SDIO argument register,         Address offset: 0x08 */
+  __IO uint32_t CMD;            /*!< SDIO command register,          Address offset: 0x0C */
+  __I uint32_t  RESPCMD;        /*!< SDIO command response register, Address offset: 0x10 */
+  __I uint32_t  RESP1;          /*!< SDIO response 1 register,       Address offset: 0x14 */
+  __I uint32_t  RESP2;          /*!< SDIO response 2 register,       Address offset: 0x18 */
+  __I uint32_t  RESP3;          /*!< SDIO response 3 register,       Address offset: 0x1C */
+  __I uint32_t  RESP4;          /*!< SDIO response 4 register,       Address offset: 0x20 */
+  __IO uint32_t DTIMER;         /*!< SDIO data timer register,       Address offset: 0x24 */
+  __IO uint32_t DLEN;           /*!< SDIO data length register,      Address offset: 0x28 */
+  __IO uint32_t DCTRL;          /*!< SDIO data control register,     Address offset: 0x2C */
+  __I uint32_t  DCOUNT;         /*!< SDIO data counter register,     Address offset: 0x30 */
+  __I uint32_t  STA;            /*!< SDIO status register,           Address offset: 0x34 */
+  __IO uint32_t ICR;            /*!< SDIO interrupt clear register,  Address offset: 0x38 */
+  __IO uint32_t MASK;           /*!< SDIO mask register,             Address offset: 0x3C */
+  uint32_t      RESERVED0[2];   /*!< Reserved, 0x40-0x44                                  */
+  __I uint32_t  FIFOCNT;        /*!< SDIO FIFO counter register,     Address offset: 0x48 */
+  uint32_t      RESERVED1[13];  /*!< Reserved, 0x4C-0x7C                                  */
+  __IO uint32_t FIFO;           /*!< SDIO data FIFO register,        Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+  * @brief Serial Peripheral Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t CR1;        /*!< SPI control register 1 (not used in I2S mode),      Address offset: 0x00 */
+  __IO uint32_t CR2;        /*!< SPI control register 2,                             Address offset: 0x04 */
+  __IO uint32_t SR;         /*!< SPI status register,                                Address offset: 0x08 */
+  __IO uint32_t DR;         /*!< SPI data register,                                  Address offset: 0x0C */
+  __IO uint32_t CRCPR;      /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+  __IO uint32_t RXCRCR;     /*!< SPI RX CRC register (not used in I2S mode),         Address offset: 0x14 */
+  __IO uint32_t TXCRCR;     /*!< SPI TX CRC register (not used in I2S mode),         Address offset: 0x18 */
+  __IO uint32_t I2SCFGR;    /*!< SPI_I2S configuration register,                     Address offset: 0x1C */
+  __IO uint32_t I2SPR;      /*!< SPI_I2S prescaler register,                         Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+  * @brief TIM
+  */
+
+typedef struct
+{
+  __IO uint32_t CR1;         /*!< TIM control register 1,              Address offset: 0x00 */
+  __IO uint32_t CR2;         /*!< TIM control register 2,              Address offset: 0x04 */
+  __IO uint32_t SMCR;        /*!< TIM slave mode control register,     Address offset: 0x08 */
+  __IO uint32_t DIER;        /*!< TIM DMA/interrupt enable register,   Address offset: 0x0C */
+  __IO uint32_t SR;          /*!< TIM status register,                 Address offset: 0x10 */
+  __IO uint32_t EGR;         /*!< TIM event generation register,       Address offset: 0x14 */
+  __IO uint32_t CCMR1;       /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+  __IO uint32_t CCMR2;       /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+  __IO uint32_t CCER;        /*!< TIM capture/compare enable register, Address offset: 0x20 */
+  __IO uint32_t CNT;         /*!< TIM counter register,                Address offset: 0x24 */
+  __IO uint32_t PSC;         /*!< TIM prescaler,                       Address offset: 0x28 */
+  __IO uint32_t ARR;         /*!< TIM auto-reload register,            Address offset: 0x2C */
+  __IO uint32_t RCR;         /*!< TIM repetition counter register,     Address offset: 0x30 */
+  __IO uint32_t CCR1;        /*!< TIM capture/compare register 1,      Address offset: 0x34 */
+  __IO uint32_t CCR2;        /*!< TIM capture/compare register 2,      Address offset: 0x38 */
+  __IO uint32_t CCR3;        /*!< TIM capture/compare register 3,      Address offset: 0x3C */
+  __IO uint32_t CCR4;        /*!< TIM capture/compare register 4,      Address offset: 0x40 */
+  __IO uint32_t BDTR;        /*!< TIM break and dead-time register,    Address offset: 0x44 */
+  __IO uint32_t DCR;         /*!< TIM DMA control register,            Address offset: 0x48 */
+  __IO uint32_t DMAR;        /*!< TIM DMA address for full transfer,   Address offset: 0x4C */
+  __IO uint32_t OR;          /*!< TIM option register,                 Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+  * @brief Universal Synchronous Asynchronous Receiver Transmitter
+  */
+
+typedef struct
+{
+  __IO uint32_t SR;         /*!< USART Status register,                   Address offset: 0x00 */
+  __IO uint32_t DR;         /*!< USART Data register,                     Address offset: 0x04 */
+  __IO uint32_t BRR;        /*!< USART Baud rate register,                Address offset: 0x08 */
+  __IO uint32_t CR1;        /*!< USART Control register 1,                Address offset: 0x0C */
+  __IO uint32_t CR2;        /*!< USART Control register 2,                Address offset: 0x10 */
+  __IO uint32_t CR3;        /*!< USART Control register 3,                Address offset: 0x14 */
+  __IO uint32_t GTPR;       /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+  * @brief Window WATCHDOG
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;   /*!< WWDG Control register,       Address offset: 0x00 */
+  __IO uint32_t CFR;  /*!< WWDG Configuration register, Address offset: 0x04 */
+  __IO uint32_t SR;   /*!< WWDG Status register,        Address offset: 0x08 */
+} WWDG_TypeDef;
+
+
+/**
+  * @brief RNG
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;  /*!< RNG control register, Address offset: 0x00 */
+  __IO uint32_t SR;  /*!< RNG status register,  Address offset: 0x04 */
+  __IO uint32_t DR;  /*!< RNG data register,    Address offset: 0x08 */
+} RNG_TypeDef;
+
+
+/**
+  * @brief __USB_OTG_Core_register
+  */
+typedef struct
+{
+  __IO uint32_t GOTGCTL;      /*!<  USB_OTG Control and Status Register    000h */
+  __IO uint32_t GOTGINT;      /*!<  USB_OTG Interrupt Register             004h */
+  __IO uint32_t GAHBCFG;      /*!<  Core AHB Configuration Register        008h */
+  __IO uint32_t GUSBCFG;      /*!<  Core USB Configuration Register        00Ch */
+  __IO uint32_t GRSTCTL;      /*!<  Core Reset Register                    010h */
+  __IO uint32_t GINTSTS;      /*!<  Core Interrupt Register                014h */
+  __IO uint32_t GINTMSK;      /*!<  Core Interrupt Mask Register           018h */
+  __IO uint32_t GRXSTSR;      /*!<  Receive Sts Q Read Register            01Ch */
+  __IO uint32_t GRXSTSP;      /*!<  Receive Sts Q Read & POP Register      020h */
+  __IO uint32_t GRXFSIZ;      /* Receive FIFO Size Register                024h */
+  __IO uint32_t DIEPTXF0_HNPTXFSIZ;   /*!<  EP0 / Non Periodic Tx FIFO Size Register 028h*/
+  __IO uint32_t HNPTXSTS;     /*!<  Non Periodic Tx FIFO/Queue Sts reg     02Ch */
+  uint32_t Reserved30[2];     /* Reserved                           030h*/
+  __IO uint32_t GCCFG;        /* General Purpose IO Register        038h*/
+  __IO uint32_t CID;          /* User ID Register                   03Ch*/
+  uint32_t  Reserved40[48];   /* Reserved                      040h-0FFh*/
+  __IO uint32_t HPTXFSIZ; /* Host Periodic Tx FIFO Size Reg     100h*/
+  __IO uint32_t DIEPTXF[0x0F];/* dev Periodic Transmit FIFO */
+}
+USB_OTG_GlobalTypeDef;
+
+
+/**
+  * @brief __device_Registers
+  */
+typedef struct
+{
+  __IO uint32_t DCFG;         /* dev Configuration Register   800h*/
+  __IO uint32_t DCTL;         /* dev Control Register         804h*/
+  __IO uint32_t DSTS;         /* dev Status Register (RO)     808h*/
+  uint32_t Reserved0C;           /* Reserved                     80Ch*/
+  __IO uint32_t DIEPMSK;   /* dev IN Endpoint Mask         810h*/
+  __IO uint32_t DOEPMSK;  /* dev OUT Endpoint Mask        814h*/
+  __IO uint32_t DAINT;     /* dev All Endpoints Itr Reg    818h*/
+  __IO uint32_t DAINTMSK; /* dev All Endpoints Itr Mask   81Ch*/
+  uint32_t  Reserved20;          /* Reserved                     820h*/
+  uint32_t Reserved9;       /* Reserved                     824h*/
+  __IO uint32_t DVBUSDIS;    /* dev VBUS discharge Register  828h*/
+  __IO uint32_t DVBUSPULSE;  /* dev VBUS Pulse Register      82Ch*/
+  __IO uint32_t DTHRCTL;     /* dev thr                      830h*/
+  __IO uint32_t DIEPEMPMSK; /* dev empty msk             834h*/
+  __IO uint32_t DEACHINT;    /* dedicated EP interrupt       838h*/
+  __IO uint32_t DEACHMSK;    /* dedicated EP msk             83Ch*/
+  uint32_t Reserved40;      /* dedicated EP mask           840h*/
+  __IO uint32_t DINEP1MSK;  /* dedicated EP mask           844h*/
+  uint32_t  Reserved44[15];      /* Reserved                 844-87Ch*/
+  __IO uint32_t DOUTEP1MSK; /* dedicated EP msk            884h*/
+}
+USB_OTG_DeviceTypeDef;
+
+
+/**
+  * @brief __IN_Endpoint-Specific_Register
+  */
+typedef struct
+{
+  __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h*/
+  uint32_t Reserved04;             /* Reserved                       900h + (ep_num * 20h) + 04h*/
+  __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg     900h + (ep_num * 20h) + 08h*/
+  uint32_t Reserved0C;             /* Reserved                       900h + (ep_num * 20h) + 0Ch*/
+  __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size   900h + (ep_num * 20h) + 10h*/
+  __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg    900h + (ep_num * 20h) + 14h*/
+  __IO uint32_t DTXFSTS;/*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h*/
+  uint32_t Reserved18;             /* Reserved  900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_INEndpointTypeDef;
+
+
+/**
+  * @brief __OUT_Endpoint-Specific_Registers
+  */
+typedef struct
+{
+  __IO uint32_t DOEPCTL;       /* dev OUT Endpoint Control Reg  B00h + (ep_num * 20h) + 00h*/
+  uint32_t Reserved04;         /* Reserved                      B00h + (ep_num * 20h) + 04h*/
+  __IO uint32_t DOEPINT;       /* dev OUT Endpoint Itr Reg      B00h + (ep_num * 20h) + 08h*/
+  uint32_t Reserved0C;         /* Reserved                      B00h + (ep_num * 20h) + 0Ch*/
+  __IO uint32_t DOEPTSIZ;      /* dev OUT Endpoint Txfer Size   B00h + (ep_num * 20h) + 10h*/
+  __IO uint32_t DOEPDMA;       /* dev OUT Endpoint DMA Address  B00h + (ep_num * 20h) + 14h*/
+  uint32_t Reserved18[2];      /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+  * @brief __Host_Mode_Register_Structures
+  */
+typedef struct
+{
+  __IO uint32_t HCFG;             /* Host Configuration Register    400h*/
+  __IO uint32_t HFIR;      /* Host Frame Interval Register   404h*/
+  __IO uint32_t HFNUM;         /* Host Frame Nbr/Frame Remaining 408h*/
+  uint32_t Reserved40C;                   /* Reserved                       40Ch*/
+  __IO uint32_t HPTXSTS;   /* Host Periodic Tx FIFO/ Queue Status 410h*/
+  __IO uint32_t HAINT;   /* Host All Channels Interrupt Register 414h*/
+  __IO uint32_t HAINTMSK;   /* Host All Channels Interrupt Mask 418h*/
+}
+USB_OTG_HostTypeDef;
+
+/**
+  * @brief __Host_Channel_Specific_Registers
+  */
+typedef struct
+{
+  __IO uint32_t HCCHAR;
+  __IO uint32_t HCSPLT;
+  __IO uint32_t HCINT;
+  __IO uint32_t HCINTMSK;
+  __IO uint32_t HCTSIZ;
+  __IO uint32_t HCDMA;
+  uint32_t Reserved[2];
+}
+USB_OTG_HostChannelTypeDef;
+/**
+  * @}
+  */
+
+/** @addtogroup Peripheral_memory_map
+  * @{
+  */
+#define FLASH_BASE            ((uint32_t)0x08000000) /*!< FLASH(up to 2 MB) base address in the alias region                         */
+#define CCMDATARAM_BASE       ((uint32_t)0x10000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the alias region  */
+#define SRAM1_BASE            ((uint32_t)0x20000000) /*!< SRAM1(112 KB) base address in the alias region                             */
+#define SRAM2_BASE            ((uint32_t)0x2001C000) /*!< SRAM2(16 KB) base address in the alias region                              */
+#define SRAM3_BASE            ((uint32_t)0x20020000) /*!< SRAM3(64 KB) base address in the alias region                              */
+#define PERIPH_BASE           ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region                                */
+#define BKPSRAM_BASE          ((uint32_t)0x40024000) /*!< Backup SRAM(4 KB) base address in the alias region                         */
+#define FMC_R_BASE            ((uint32_t)0xA0000000) /*!< FMC registers base address                                                 */
+#define SRAM1_BB_BASE         ((uint32_t)0x22000000) /*!< SRAM1(112 KB) base address in the bit-band region                             */
+#define SRAM2_BB_BASE         ((uint32_t)0x22380000) /*!< SRAM2(16 KB) base address in the bit-band region                              */
+#define SRAM3_BB_BASE         ((uint32_t)0x22400000) /*!< SRAM3(64 KB) base address in the bit-band region                              */
+#define PERIPH_BB_BASE        ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region                                */
+#define BKPSRAM_BB_BASE       ((uint32_t)0x42480000) /*!< Backup SRAM(4 KB) base address in the bit-band region                         */
+#define FLASH_END             ((uint32_t)0x081FFFFF) /*!< FLASH end address */
+#define CCMDATARAM_END        ((uint32_t)0x1000FFFF) /*!< CCM data RAM end address */
+
+/* Legacy defines */
+#define SRAM_BASE             SRAM1_BASE
+#define SRAM_BB_BASE          SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE       PERIPH_BASE
+#define APB2PERIPH_BASE       (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE       (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE       (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE             (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE             (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE             (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE             (APB1PERIPH_BASE + 0x0C00)
+#define TIM6_BASE             (APB1PERIPH_BASE + 0x1000)
+#define TIM7_BASE             (APB1PERIPH_BASE + 0x1400)
+#define TIM12_BASE            (APB1PERIPH_BASE + 0x1800)
+#define TIM13_BASE            (APB1PERIPH_BASE + 0x1C00)
+#define TIM14_BASE            (APB1PERIPH_BASE + 0x2000)
+#define RTC_BASE              (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE             (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE             (APB1PERIPH_BASE + 0x3000)
+#define I2S2ext_BASE          (APB1PERIPH_BASE + 0x3400)
+#define SPI2_BASE             (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE             (APB1PERIPH_BASE + 0x3C00)
+#define I2S3ext_BASE          (APB1PERIPH_BASE + 0x4000)
+#define USART2_BASE           (APB1PERIPH_BASE + 0x4400)
+#define USART3_BASE           (APB1PERIPH_BASE + 0x4800)
+#define UART4_BASE            (APB1PERIPH_BASE + 0x4C00)
+#define UART5_BASE            (APB1PERIPH_BASE + 0x5000)
+#define I2C1_BASE             (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE             (APB1PERIPH_BASE + 0x5800)
+#define I2C3_BASE             (APB1PERIPH_BASE + 0x5C00)
+#define CAN1_BASE             (APB1PERIPH_BASE + 0x6400)
+#define CAN2_BASE             (APB1PERIPH_BASE + 0x6800)
+#define PWR_BASE              (APB1PERIPH_BASE + 0x7000)
+#define DAC_BASE              (APB1PERIPH_BASE + 0x7400)
+#define UART7_BASE            (APB1PERIPH_BASE + 0x7800)
+#define UART8_BASE            (APB1PERIPH_BASE + 0x7C00)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE             (APB2PERIPH_BASE + 0x0000)
+#define TIM8_BASE             (APB2PERIPH_BASE + 0x0400)
+#define USART1_BASE           (APB2PERIPH_BASE + 0x1000)
+#define USART6_BASE           (APB2PERIPH_BASE + 0x1400)
+#define ADC1_BASE             (APB2PERIPH_BASE + 0x2000)
+#define ADC2_BASE             (APB2PERIPH_BASE + 0x2100)
+#define ADC3_BASE             (APB2PERIPH_BASE + 0x2200)
+#define ADC_BASE              (APB2PERIPH_BASE + 0x2300)
+#define SDIO_BASE             (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE             (APB2PERIPH_BASE + 0x3000)
+#define SPI4_BASE             (APB2PERIPH_BASE + 0x3400)
+#define SYSCFG_BASE           (APB2PERIPH_BASE + 0x3800)
+#define EXTI_BASE             (APB2PERIPH_BASE + 0x3C00)
+#define TIM9_BASE             (APB2PERIPH_BASE + 0x4000)
+#define TIM10_BASE            (APB2PERIPH_BASE + 0x4400)
+#define TIM11_BASE            (APB2PERIPH_BASE + 0x4800)
+#define SPI5_BASE             (APB2PERIPH_BASE + 0x5000)
+#define SPI6_BASE             (APB2PERIPH_BASE + 0x5400)
+#define SAI1_BASE             (APB2PERIPH_BASE + 0x5800)
+#define SAI1_Block_A_BASE     (SAI1_BASE + 0x004)
+#define SAI1_Block_B_BASE     (SAI1_BASE + 0x024)
+#define LTDC_BASE             (APB2PERIPH_BASE + 0x6800)
+#define LTDC_Layer1_BASE      (LTDC_BASE + 0x84)
+#define LTDC_Layer2_BASE      (LTDC_BASE + 0x104)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE            (AHB1PERIPH_BASE + 0x0000)
+#define GPIOB_BASE            (AHB1PERIPH_BASE + 0x0400)
+#define GPIOC_BASE            (AHB1PERIPH_BASE + 0x0800)
+#define GPIOD_BASE            (AHB1PERIPH_BASE + 0x0C00)
+#define GPIOE_BASE            (AHB1PERIPH_BASE + 0x1000)
+#define GPIOF_BASE            (AHB1PERIPH_BASE + 0x1400)
+#define GPIOG_BASE            (AHB1PERIPH_BASE + 0x1800)
+#define GPIOH_BASE            (AHB1PERIPH_BASE + 0x1C00)
+#define GPIOI_BASE            (AHB1PERIPH_BASE + 0x2000)
+#define GPIOJ_BASE            (AHB1PERIPH_BASE + 0x2400)
+#define GPIOK_BASE            (AHB1PERIPH_BASE + 0x2800)
+#define CRC_BASE              (AHB1PERIPH_BASE + 0x3000)
+#define RCC_BASE              (AHB1PERIPH_BASE + 0x3800)
+#define FLASH_R_BASE          (AHB1PERIPH_BASE + 0x3C00)
+#define DMA1_BASE             (AHB1PERIPH_BASE + 0x6000)
+#define DMA1_Stream0_BASE     (DMA1_BASE + 0x010)
+#define DMA1_Stream1_BASE     (DMA1_BASE + 0x028)
+#define DMA1_Stream2_BASE     (DMA1_BASE + 0x040)
+#define DMA1_Stream3_BASE     (DMA1_BASE + 0x058)
+#define DMA1_Stream4_BASE     (DMA1_BASE + 0x070)
+#define DMA1_Stream5_BASE     (DMA1_BASE + 0x088)
+#define DMA1_Stream6_BASE     (DMA1_BASE + 0x0A0)
+#define DMA1_Stream7_BASE     (DMA1_BASE + 0x0B8)
+#define DMA2_BASE             (AHB1PERIPH_BASE + 0x6400)
+#define DMA2_Stream0_BASE     (DMA2_BASE + 0x010)
+#define DMA2_Stream1_BASE     (DMA2_BASE + 0x028)
+#define DMA2_Stream2_BASE     (DMA2_BASE + 0x040)
+#define DMA2_Stream3_BASE     (DMA2_BASE + 0x058)
+#define DMA2_Stream4_BASE     (DMA2_BASE + 0x070)
+#define DMA2_Stream5_BASE     (DMA2_BASE + 0x088)
+#define DMA2_Stream6_BASE     (DMA2_BASE + 0x0A0)
+#define DMA2_Stream7_BASE     (DMA2_BASE + 0x0B8)
+#define ETH_BASE              (AHB1PERIPH_BASE + 0x8000)
+#define ETH_MAC_BASE          (ETH_BASE)
+#define ETH_MMC_BASE          (ETH_BASE + 0x0100)
+#define ETH_PTP_BASE          (ETH_BASE + 0x0700)
+#define ETH_DMA_BASE          (ETH_BASE + 0x1000)
+#define DMA2D_BASE            (AHB1PERIPH_BASE + 0xB000)
+
+/*!< AHB2 peripherals */
+#define DCMI_BASE             (AHB2PERIPH_BASE + 0x50000)
+#define RNG_BASE              (AHB2PERIPH_BASE + 0x60800)
+
+/*!< FMC Bankx registers base address */
+#define FMC_Bank1_R_BASE      (FMC_R_BASE + 0x0000)
+#define FMC_Bank1E_R_BASE     (FMC_R_BASE + 0x0104)
+#define FMC_Bank2_3_R_BASE    (FMC_R_BASE + 0x0060)
+#define FMC_Bank4_R_BASE      (FMC_R_BASE + 0x00A0)
+#define FMC_Bank5_6_R_BASE    (FMC_R_BASE + 0x0140)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE           ((uint32_t )0xE0042000)
+
+/*!< USB registers base address */
+#define USB_OTG_HS_PERIPH_BASE               ((uint32_t )0x40040000)
+#define USB_OTG_FS_PERIPH_BASE               ((uint32_t )0x50000000)
+
+#define USB_OTG_GLOBAL_BASE                  ((uint32_t )0x000)
+#define USB_OTG_DEVICE_BASE                  ((uint32_t )0x800)
+#define USB_OTG_IN_ENDPOINT_BASE             ((uint32_t )0x900)
+#define USB_OTG_OUT_ENDPOINT_BASE            ((uint32_t )0xB00)
+#define USB_OTG_EP_REG_SIZE                  ((uint32_t )0x20)
+#define USB_OTG_HOST_BASE                    ((uint32_t )0x400)
+#define USB_OTG_HOST_PORT_BASE               ((uint32_t )0x440)
+#define USB_OTG_HOST_CHANNEL_BASE            ((uint32_t )0x500)
+#define USB_OTG_HOST_CHANNEL_SIZE            ((uint32_t )0x20)
+#define USB_OTG_PCGCCTL_BASE                 ((uint32_t )0xE00)
+#define USB_OTG_FIFO_BASE                    ((uint32_t )0x1000)
+#define USB_OTG_FIFO_SIZE                    ((uint32_t )0x1000)
+
+/**
+  * @}
+  */
+
+/** @addtogroup Peripheral_declaration
+  * @{
+  */
+#define TIM2                ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3                ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4                ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5                ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6                ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7                ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12               ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13               ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14               ((TIM_TypeDef *) TIM14_BASE)
+#define RTC                 ((RTC_TypeDef *) RTC_BASE)
+#define WWDG                ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG                ((IWDG_TypeDef *) IWDG_BASE)
+#define I2S2ext             ((SPI_TypeDef *) I2S2ext_BASE)
+#define SPI2                ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3                ((SPI_TypeDef *) SPI3_BASE)
+#define I2S3ext             ((SPI_TypeDef *) I2S3ext_BASE)
+#define USART2              ((USART_TypeDef *) USART2_BASE)
+#define USART3              ((USART_TypeDef *) USART3_BASE)
+#define UART4               ((USART_TypeDef *) UART4_BASE)
+#define UART5               ((USART_TypeDef *) UART5_BASE)
+#define I2C1                ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2                ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3                ((I2C_TypeDef *) I2C3_BASE)
+#define CAN1                ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2                ((CAN_TypeDef *) CAN2_BASE)
+#define PWR                 ((PWR_TypeDef *) PWR_BASE)
+#define DAC                 ((DAC_TypeDef *) DAC_BASE)
+#define UART7               ((USART_TypeDef *) UART7_BASE)
+#define UART8               ((USART_TypeDef *) UART8_BASE)
+#define TIM1                ((TIM_TypeDef *) TIM1_BASE)
+#define TIM8                ((TIM_TypeDef *) TIM8_BASE)
+#define USART1              ((USART_TypeDef *) USART1_BASE)
+#define USART6              ((USART_TypeDef *) USART6_BASE)
+#define ADC                 ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1                ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2                ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3                ((ADC_TypeDef *) ADC3_BASE)
+#define SDIO                ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1                ((SPI_TypeDef *) SPI1_BASE)
+#define SPI4                ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG              ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI                ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9                ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10               ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11               ((TIM_TypeDef *) TIM11_BASE)
+#define SPI5                ((SPI_TypeDef *) SPI5_BASE)
+#define SPI6                ((SPI_TypeDef *) SPI6_BASE)
+#define SAI1                ((SAI_TypeDef *) SAI1_BASE)
+#define SAI1_Block_A        ((SAI_Block_TypeDef *)SAI1_Block_A_BASE)
+#define SAI1_Block_B        ((SAI_Block_TypeDef *)SAI1_Block_B_BASE)
+#define LTDC                ((LTDC_TypeDef *)LTDC_BASE)
+#define LTDC_Layer1         ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE)
+#define LTDC_Layer2         ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE)
+
+#define GPIOA               ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB               ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC               ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD               ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE               ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF               ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG               ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH               ((GPIO_TypeDef *) GPIOH_BASE)
+#define GPIOI               ((GPIO_TypeDef *) GPIOI_BASE)
+#define GPIOJ               ((GPIO_TypeDef *) GPIOJ_BASE)
+#define GPIOK               ((GPIO_TypeDef *) GPIOK_BASE)
+#define CRC                 ((CRC_TypeDef *) CRC_BASE)
+#define RCC                 ((RCC_TypeDef *) RCC_BASE)
+#define FLASH               ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1                ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0        ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1        ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2        ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3        ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4        ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5        ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6        ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7        ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2                ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0        ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1        ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2        ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3        ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4        ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5        ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6        ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7        ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define ETH                 ((ETH_TypeDef *) ETH_BASE)
+#define DMA2D               ((DMA2D_TypeDef *)DMA2D_BASE)
+#define DCMI                ((DCMI_TypeDef *) DCMI_BASE)
+#define RNG                 ((RNG_TypeDef *) RNG_BASE)
+#define FMC_Bank1           ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE)
+#define FMC_Bank1E          ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE)
+#define FMC_Bank2_3         ((FMC_Bank2_3_TypeDef *) FMC_Bank2_3_R_BASE)
+#define FMC_Bank4           ((FMC_Bank4_TypeDef *) FMC_Bank4_R_BASE)
+#define FMC_Bank5_6         ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE)
+
+#define DBGMCU              ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+#define USB_OTG_FS          ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+#define USB_OTG_HS          ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE)
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_constants
+  * @{
+  */
+
+  /** @addtogroup Peripheral_Registers_Bits_Definition
+  * @{
+  */
+
+/******************************************************************************/
+/*                         Peripheral Registers_Bits_Definition               */
+/******************************************************************************/
+
+/******************************************************************************/
+/*                                                                            */
+/*                        Analog to Digital Converter                         */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for ADC_SR register  ********************/
+#define  ADC_SR_AWD                          ((uint32_t)0x00000001)        /*!<Analog watchdog flag */
+#define  ADC_SR_EOC                          ((uint32_t)0x00000002)        /*!<End of conversion */
+#define  ADC_SR_JEOC                         ((uint32_t)0x00000004)        /*!<Injected channel end of conversion */
+#define  ADC_SR_JSTRT                        ((uint32_t)0x00000008)        /*!<Injected channel Start flag */
+#define  ADC_SR_STRT                         ((uint32_t)0x00000010)        /*!<Regular channel Start flag */
+#define  ADC_SR_OVR                          ((uint32_t)0x00000020)        /*!<Overrun flag */
+
+/*******************  Bit definition for ADC_CR1 register  ********************/
+#define  ADC_CR1_AWDCH                       ((uint32_t)0x0000001F)        /*!<AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define  ADC_CR1_AWDCH_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_CR1_AWDCH_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_CR1_AWDCH_2                     ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_CR1_AWDCH_3                     ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_CR1_AWDCH_4                     ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_CR1_EOCIE                       ((uint32_t)0x00000020)        /*!<Interrupt enable for EOC */
+#define  ADC_CR1_AWDIE                       ((uint32_t)0x00000040)        /*!<AAnalog Watchdog interrupt enable */
+#define  ADC_CR1_JEOCIE                      ((uint32_t)0x00000080)        /*!<Interrupt enable for injected channels */
+#define  ADC_CR1_SCAN                        ((uint32_t)0x00000100)        /*!<Scan mode */
+#define  ADC_CR1_AWDSGL                      ((uint32_t)0x00000200)        /*!<Enable the watchdog on a single channel in scan mode */
+#define  ADC_CR1_JAUTO                       ((uint32_t)0x00000400)        /*!<Automatic injected group conversion */
+#define  ADC_CR1_DISCEN                      ((uint32_t)0x00000800)        /*!<Discontinuous mode on regular channels */
+#define  ADC_CR1_JDISCEN                     ((uint32_t)0x00001000)        /*!<Discontinuous mode on injected channels */
+#define  ADC_CR1_DISCNUM                     ((uint32_t)0x0000E000)        /*!<DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define  ADC_CR1_DISCNUM_0                   ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  ADC_CR1_DISCNUM_1                   ((uint32_t)0x00004000)        /*!<Bit 1 */
+#define  ADC_CR1_DISCNUM_2                   ((uint32_t)0x00008000)        /*!<Bit 2 */
+#define  ADC_CR1_JAWDEN                      ((uint32_t)0x00400000)        /*!<Analog watchdog enable on injected channels */
+#define  ADC_CR1_AWDEN                       ((uint32_t)0x00800000)        /*!<Analog watchdog enable on regular channels */
+#define  ADC_CR1_RES                         ((uint32_t)0x03000000)        /*!<RES[2:0] bits (Resolution) */
+#define  ADC_CR1_RES_0                       ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  ADC_CR1_RES_1                       ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  ADC_CR1_OVRIE                       ((uint32_t)0x04000000)         /*!<overrun interrupt enable */
+
+/*******************  Bit definition for ADC_CR2 register  ********************/
+#define  ADC_CR2_ADON                        ((uint32_t)0x00000001)        /*!<A/D Converter ON / OFF */
+#define  ADC_CR2_CONT                        ((uint32_t)0x00000002)        /*!<Continuous Conversion */
+#define  ADC_CR2_DMA                         ((uint32_t)0x00000100)        /*!<Direct Memory access mode */
+#define  ADC_CR2_DDS                         ((uint32_t)0x00000200)        /*!<DMA disable selection (Single ADC) */
+#define  ADC_CR2_EOCS                        ((uint32_t)0x00000400)        /*!<End of conversion selection */
+#define  ADC_CR2_ALIGN                       ((uint32_t)0x00000800)        /*!<Data Alignment */
+#define  ADC_CR2_JEXTSEL                     ((uint32_t)0x000F0000)        /*!<JEXTSEL[3:0] bits (External event select for injected group) */
+#define  ADC_CR2_JEXTSEL_0                   ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  ADC_CR2_JEXTSEL_1                   ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  ADC_CR2_JEXTSEL_2                   ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  ADC_CR2_JEXTSEL_3                   ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  ADC_CR2_JEXTEN                      ((uint32_t)0x00300000)        /*!<JEXTEN[1:0] bits (External Trigger Conversion mode for injected channelsp) */
+#define  ADC_CR2_JEXTEN_0                    ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_CR2_JEXTEN_1                    ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  ADC_CR2_JSWSTART                    ((uint32_t)0x00400000)        /*!<Start Conversion of injected channels */
+#define  ADC_CR2_EXTSEL                      ((uint32_t)0x0F000000)        /*!<EXTSEL[3:0] bits (External Event Select for regular group) */
+#define  ADC_CR2_EXTSEL_0                    ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  ADC_CR2_EXTSEL_1                    ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  ADC_CR2_EXTSEL_2                    ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  ADC_CR2_EXTSEL_3                    ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  ADC_CR2_EXTEN                       ((uint32_t)0x30000000)        /*!<EXTEN[1:0] bits (External Trigger Conversion mode for regular channelsp) */
+#define  ADC_CR2_EXTEN_0                     ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  ADC_CR2_EXTEN_1                     ((uint32_t)0x20000000)        /*!<Bit 1 */
+#define  ADC_CR2_SWSTART                     ((uint32_t)0x40000000)        /*!<Start Conversion of regular channels */
+
+/******************  Bit definition for ADC_SMPR1 register  *******************/
+#define  ADC_SMPR1_SMP10                     ((uint32_t)0x00000007)        /*!<SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define  ADC_SMPR1_SMP10_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP10_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP10_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP11                     ((uint32_t)0x00000038)        /*!<SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define  ADC_SMPR1_SMP11_0                   ((uint32_t)0x00000008)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP11_1                   ((uint32_t)0x00000010)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP11_2                   ((uint32_t)0x00000020)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP12                     ((uint32_t)0x000001C0)        /*!<SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define  ADC_SMPR1_SMP12_0                   ((uint32_t)0x00000040)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP12_1                   ((uint32_t)0x00000080)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP12_2                   ((uint32_t)0x00000100)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP13                     ((uint32_t)0x00000E00)        /*!<SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define  ADC_SMPR1_SMP13_0                   ((uint32_t)0x00000200)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP13_1                   ((uint32_t)0x00000400)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP13_2                   ((uint32_t)0x00000800)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP14                     ((uint32_t)0x00007000)        /*!<SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define  ADC_SMPR1_SMP14_0                   ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP14_1                   ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP14_2                   ((uint32_t)0x00004000)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP15                     ((uint32_t)0x00038000)        /*!<SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define  ADC_SMPR1_SMP15_0                   ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP15_1                   ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP15_2                   ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP16                     ((uint32_t)0x001C0000)        /*!<SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define  ADC_SMPR1_SMP16_0                   ((uint32_t)0x00040000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP16_1                   ((uint32_t)0x00080000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP16_2                   ((uint32_t)0x00100000)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP17                     ((uint32_t)0x00E00000)        /*!<SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define  ADC_SMPR1_SMP17_0                   ((uint32_t)0x00200000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP17_1                   ((uint32_t)0x00400000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP17_2                   ((uint32_t)0x00800000)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP18                     ((uint32_t)0x07000000)        /*!<SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define  ADC_SMPR1_SMP18_0                   ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP18_1                   ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP18_2                   ((uint32_t)0x04000000)        /*!<Bit 2 */
+
+/******************  Bit definition for ADC_SMPR2 register  *******************/
+#define  ADC_SMPR2_SMP0                      ((uint32_t)0x00000007)        /*!<SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define  ADC_SMPR2_SMP0_0                    ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP0_1                    ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP0_2                    ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP1                      ((uint32_t)0x00000038)        /*!<SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define  ADC_SMPR2_SMP1_0                    ((uint32_t)0x00000008)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP1_1                    ((uint32_t)0x00000010)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP1_2                    ((uint32_t)0x00000020)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP2                      ((uint32_t)0x000001C0)        /*!<SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define  ADC_SMPR2_SMP2_0                    ((uint32_t)0x00000040)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP2_1                    ((uint32_t)0x00000080)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP2_2                    ((uint32_t)0x00000100)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP3                      ((uint32_t)0x00000E00)        /*!<SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define  ADC_SMPR2_SMP3_0                    ((uint32_t)0x00000200)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP3_1                    ((uint32_t)0x00000400)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP3_2                    ((uint32_t)0x00000800)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP4                      ((uint32_t)0x00007000)        /*!<SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define  ADC_SMPR2_SMP4_0                    ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP4_1                    ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP4_2                    ((uint32_t)0x00004000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP5                      ((uint32_t)0x00038000)        /*!<SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define  ADC_SMPR2_SMP5_0                    ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP5_1                    ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP5_2                    ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP6                      ((uint32_t)0x001C0000)        /*!<SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define  ADC_SMPR2_SMP6_0                    ((uint32_t)0x00040000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP6_1                    ((uint32_t)0x00080000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP6_2                    ((uint32_t)0x00100000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP7                      ((uint32_t)0x00E00000)        /*!<SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define  ADC_SMPR2_SMP7_0                    ((uint32_t)0x00200000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP7_1                    ((uint32_t)0x00400000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP7_2                    ((uint32_t)0x00800000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP8                      ((uint32_t)0x07000000)        /*!<SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define  ADC_SMPR2_SMP8_0                    ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP8_1                    ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP8_2                    ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP9                      ((uint32_t)0x38000000)        /*!<SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define  ADC_SMPR2_SMP9_0                    ((uint32_t)0x08000000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP9_1                    ((uint32_t)0x10000000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP9_2                    ((uint32_t)0x20000000)        /*!<Bit 2 */
+
+/******************  Bit definition for ADC_JOFR1 register  *******************/
+#define  ADC_JOFR1_JOFFSET1                  ((uint32_t)0x0FFF)            /*!<Data offset for injected channel 1 */
+
+/******************  Bit definition for ADC_JOFR2 register  *******************/
+#define  ADC_JOFR2_JOFFSET2                  ((uint32_t)0x0FFF)            /*!<Data offset for injected channel 2 */
+
+/******************  Bit definition for ADC_JOFR3 register  *******************/
+#define  ADC_JOFR3_JOFFSET3                  ((uint32_t)0x0FFF)            /*!<Data offset for injected channel 3 */
+
+/******************  Bit definition for ADC_JOFR4 register  *******************/
+#define  ADC_JOFR4_JOFFSET4                  ((uint32_t)0x0FFF)            /*!<Data offset for injected channel 4 */
+
+/*******************  Bit definition for ADC_HTR register  ********************/
+#define  ADC_HTR_HT                          ((uint32_t)0x0FFF)            /*!<Analog watchdog high threshold */
+
+/*******************  Bit definition for ADC_LTR register  ********************/
+#define  ADC_LTR_LT                          ((uint32_t)0x0FFF)            /*!<Analog watchdog low threshold */
+
+/*******************  Bit definition for ADC_SQR1 register  *******************/
+#define  ADC_SQR1_SQ13                       ((uint32_t)0x0000001F)        /*!<SQ13[4:0] bits (13th conversion in regular sequence) */
+#define  ADC_SQR1_SQ13_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SQR1_SQ13_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SQR1_SQ13_2                     ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SQR1_SQ13_3                     ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_SQR1_SQ13_4                     ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_SQR1_SQ14                       ((uint32_t)0x000003E0)        /*!<SQ14[4:0] bits (14th conversion in regular sequence) */
+#define  ADC_SQR1_SQ14_0                     ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  ADC_SQR1_SQ14_1                     ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  ADC_SQR1_SQ14_2                     ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  ADC_SQR1_SQ14_3                     ((uint32_t)0x00000100)        /*!<Bit 3 */
+#define  ADC_SQR1_SQ14_4                     ((uint32_t)0x00000200)        /*!<Bit 4 */
+#define  ADC_SQR1_SQ15                       ((uint32_t)0x00007C00)        /*!<SQ15[4:0] bits (15th conversion in regular sequence) */
+#define  ADC_SQR1_SQ15_0                     ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  ADC_SQR1_SQ15_1                     ((uint32_t)0x00000800)        /*!<Bit 1 */
+#define  ADC_SQR1_SQ15_2                     ((uint32_t)0x00001000)        /*!<Bit 2 */
+#define  ADC_SQR1_SQ15_3                     ((uint32_t)0x00002000)        /*!<Bit 3 */
+#define  ADC_SQR1_SQ15_4                     ((uint32_t)0x00004000)        /*!<Bit 4 */
+#define  ADC_SQR1_SQ16                       ((uint32_t)0x000F8000)        /*!<SQ16[4:0] bits (16th conversion in regular sequence) */
+#define  ADC_SQR1_SQ16_0                     ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SQR1_SQ16_1                     ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SQR1_SQ16_2                     ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SQR1_SQ16_3                     ((uint32_t)0x00040000)        /*!<Bit 3 */
+#define  ADC_SQR1_SQ16_4                     ((uint32_t)0x00080000)        /*!<Bit 4 */
+#define  ADC_SQR1_L                          ((uint32_t)0x00F00000)        /*!<L[3:0] bits (Regular channel sequence length) */
+#define  ADC_SQR1_L_0                        ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_SQR1_L_1                        ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  ADC_SQR1_L_2                        ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  ADC_SQR1_L_3                        ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+/*******************  Bit definition for ADC_SQR2 register  *******************/
+#define  ADC_SQR2_SQ7                        ((uint32_t)0x0000001F)        /*!<SQ7[4:0] bits (7th conversion in regular sequence) */
+#define  ADC_SQR2_SQ7_0                      ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ7_1                      ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ7_2                      ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ7_3                      ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ7_4                      ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ8                        ((uint32_t)0x000003E0)        /*!<SQ8[4:0] bits (8th conversion in regular sequence) */
+#define  ADC_SQR2_SQ8_0                      ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ8_1                      ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ8_2                      ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ8_3                      ((uint32_t)0x00000100)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ8_4                      ((uint32_t)0x00000200)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ9                        ((uint32_t)0x00007C00)        /*!<SQ9[4:0] bits (9th conversion in regular sequence) */
+#define  ADC_SQR2_SQ9_0                      ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ9_1                      ((uint32_t)0x00000800)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ9_2                      ((uint32_t)0x00001000)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ9_3                      ((uint32_t)0x00002000)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ9_4                      ((uint32_t)0x00004000)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ10                       ((uint32_t)0x000F8000)        /*!<SQ10[4:0] bits (10th conversion in regular sequence) */
+#define  ADC_SQR2_SQ10_0                     ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ10_1                     ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ10_2                     ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ10_3                     ((uint32_t)0x00040000)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ10_4                     ((uint32_t)0x00080000)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ11                       ((uint32_t)0x01F00000)        /*!<SQ11[4:0] bits (11th conversion in regular sequence) */
+#define  ADC_SQR2_SQ11_0                     ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ11_1                     ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ11_2                     ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ11_3                     ((uint32_t)0x00800000)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ11_4                     ((uint32_t)0x01000000)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ12                       ((uint32_t)0x3E000000)        /*!<SQ12[4:0] bits (12th conversion in regular sequence) */
+#define  ADC_SQR2_SQ12_0                     ((uint32_t)0x02000000)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ12_1                     ((uint32_t)0x04000000)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ12_2                     ((uint32_t)0x08000000)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ12_3                     ((uint32_t)0x10000000)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ12_4                     ((uint32_t)0x20000000)        /*!<Bit 4 */
+
+/*******************  Bit definition for ADC_SQR3 register  *******************/
+#define  ADC_SQR3_SQ1                        ((uint32_t)0x0000001F)        /*!<SQ1[4:0] bits (1st conversion in regular sequence) */
+#define  ADC_SQR3_SQ1_0                      ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ1_1                      ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ1_2                      ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ1_3                      ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ1_4                      ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ2                        ((uint32_t)0x000003E0)        /*!<SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define  ADC_SQR3_SQ2_0                      ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ2_1                      ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ2_2                      ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ2_3                      ((uint32_t)0x00000100)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ2_4                      ((uint32_t)0x00000200)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ3                        ((uint32_t)0x00007C00)        /*!<SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define  ADC_SQR3_SQ3_0                      ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ3_1                      ((uint32_t)0x00000800)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ3_2                      ((uint32_t)0x00001000)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ3_3                      ((uint32_t)0x00002000)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ3_4                      ((uint32_t)0x00004000)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ4                        ((uint32_t)0x000F8000)        /*!<SQ4[4:0] bits (4th conversion in regular sequence) */
+#define  ADC_SQR3_SQ4_0                      ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ4_1                      ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ4_2                      ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ4_3                      ((uint32_t)0x00040000)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ4_4                      ((uint32_t)0x00080000)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ5                        ((uint32_t)0x01F00000)        /*!<SQ5[4:0] bits (5th conversion in regular sequence) */
+#define  ADC_SQR3_SQ5_0                      ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ5_1                      ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ5_2                      ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ5_3                      ((uint32_t)0x00800000)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ5_4                      ((uint32_t)0x01000000)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ6                        ((uint32_t)0x3E000000)        /*!<SQ6[4:0] bits (6th conversion in regular sequence) */
+#define  ADC_SQR3_SQ6_0                      ((uint32_t)0x02000000)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ6_1                      ((uint32_t)0x04000000)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ6_2                      ((uint32_t)0x08000000)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ6_3                      ((uint32_t)0x10000000)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ6_4                      ((uint32_t)0x20000000)        /*!<Bit 4 */
+
+/*******************  Bit definition for ADC_JSQR register  *******************/
+#define  ADC_JSQR_JSQ1                       ((uint32_t)0x0000001F)        /*!<JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define  ADC_JSQR_JSQ1_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_JSQR_JSQ1_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_JSQR_JSQ1_2                     ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_JSQR_JSQ1_3                     ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_JSQR_JSQ1_4                     ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_JSQR_JSQ2                       ((uint32_t)0x000003E0)        /*!<JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define  ADC_JSQR_JSQ2_0                     ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  ADC_JSQR_JSQ2_1                     ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  ADC_JSQR_JSQ2_2                     ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  ADC_JSQR_JSQ2_3                     ((uint32_t)0x00000100)        /*!<Bit 3 */
+#define  ADC_JSQR_JSQ2_4                     ((uint32_t)0x00000200)        /*!<Bit 4 */
+#define  ADC_JSQR_JSQ3                       ((uint32_t)0x00007C00)        /*!<JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define  ADC_JSQR_JSQ3_0                     ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  ADC_JSQR_JSQ3_1                     ((uint32_t)0x00000800)        /*!<Bit 1 */
+#define  ADC_JSQR_JSQ3_2                     ((uint32_t)0x00001000)        /*!<Bit 2 */
+#define  ADC_JSQR_JSQ3_3                     ((uint32_t)0x00002000)        /*!<Bit 3 */
+#define  ADC_JSQR_JSQ3_4                     ((uint32_t)0x00004000)        /*!<Bit 4 */
+#define  ADC_JSQR_JSQ4                       ((uint32_t)0x000F8000)        /*!<JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define  ADC_JSQR_JSQ4_0                     ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_JSQR_JSQ4_1                     ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_JSQR_JSQ4_2                     ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_JSQR_JSQ4_3                     ((uint32_t)0x00040000)        /*!<Bit 3 */
+#define  ADC_JSQR_JSQ4_4                     ((uint32_t)0x00080000)        /*!<Bit 4 */
+#define  ADC_JSQR_JL                         ((uint32_t)0x00300000)        /*!<JL[1:0] bits (Injected Sequence length) */
+#define  ADC_JSQR_JL_0                       ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_JSQR_JL_1                       ((uint32_t)0x00200000)        /*!<Bit 1 */
+
+/*******************  Bit definition for ADC_JDR1 register  *******************/
+#define  ADC_JDR1_JDATA                      ((uint32_t)0xFFFF)            /*!<Injected data */
+
+/*******************  Bit definition for ADC_JDR2 register  *******************/
+#define  ADC_JDR2_JDATA                      ((uint32_t)0xFFFF)            /*!<Injected data */
+
+/*******************  Bit definition for ADC_JDR3 register  *******************/
+#define  ADC_JDR3_JDATA                      ((uint32_t)0xFFFF)            /*!<Injected data */
+
+/*******************  Bit definition for ADC_JDR4 register  *******************/
+#define  ADC_JDR4_JDATA                      ((uint32_t)0xFFFF)            /*!<Injected data */
+
+/********************  Bit definition for ADC_DR register  ********************/
+#define  ADC_DR_DATA                         ((uint32_t)0x0000FFFF)        /*!<Regular data */
+#define  ADC_DR_ADC2DATA                     ((uint32_t)0xFFFF0000)        /*!<ADC2 data */
+
+/*******************  Bit definition for ADC_CSR register  ********************/
+#define  ADC_CSR_AWD1                        ((uint32_t)0x00000001)        /*!<ADC1 Analog watchdog flag */
+#define  ADC_CSR_EOC1                        ((uint32_t)0x00000002)        /*!<ADC1 End of conversion */
+#define  ADC_CSR_JEOC1                       ((uint32_t)0x00000004)        /*!<ADC1 Injected channel end of conversion */
+#define  ADC_CSR_JSTRT1                      ((uint32_t)0x00000008)        /*!<ADC1 Injected channel Start flag */
+#define  ADC_CSR_STRT1                       ((uint32_t)0x00000010)        /*!<ADC1 Regular channel Start flag */
+#define  ADC_CSR_DOVR1                       ((uint32_t)0x00000020)        /*!<ADC1 DMA overrun  flag */
+#define  ADC_CSR_AWD2                        ((uint32_t)0x00000100)        /*!<ADC2 Analog watchdog flag */
+#define  ADC_CSR_EOC2                        ((uint32_t)0x00000200)        /*!<ADC2 End of conversion */
+#define  ADC_CSR_JEOC2                       ((uint32_t)0x00000400)        /*!<ADC2 Injected channel end of conversion */
+#define  ADC_CSR_JSTRT2                      ((uint32_t)0x00000800)        /*!<ADC2 Injected channel Start flag */
+#define  ADC_CSR_STRT2                       ((uint32_t)0x00001000)        /*!<ADC2 Regular channel Start flag */
+#define  ADC_CSR_DOVR2                       ((uint32_t)0x00002000)        /*!<ADC2 DMA overrun  flag */
+#define  ADC_CSR_AWD3                        ((uint32_t)0x00010000)        /*!<ADC3 Analog watchdog flag */
+#define  ADC_CSR_EOC3                        ((uint32_t)0x00020000)        /*!<ADC3 End of conversion */
+#define  ADC_CSR_JEOC3                       ((uint32_t)0x00040000)        /*!<ADC3 Injected channel end of conversion */
+#define  ADC_CSR_JSTRT3                      ((uint32_t)0x00080000)        /*!<ADC3 Injected channel Start flag */
+#define  ADC_CSR_STRT3                       ((uint32_t)0x00100000)        /*!<ADC3 Regular channel Start flag */
+#define  ADC_CSR_DOVR3                       ((uint32_t)0x00200000)        /*!<ADC3 DMA overrun  flag */
+
+/*******************  Bit definition for ADC_CCR register  ********************/
+#define  ADC_CCR_MULTI                       ((uint32_t)0x0000001F)        /*!<MULTI[4:0] bits (Multi-ADC mode selection) */
+#define  ADC_CCR_MULTI_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_CCR_MULTI_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_CCR_MULTI_2                     ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_CCR_MULTI_3                     ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_CCR_MULTI_4                     ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_CCR_DELAY                       ((uint32_t)0x00000F00)        /*!<DELAY[3:0] bits (Delay between 2 sampling phases) */
+#define  ADC_CCR_DELAY_0                     ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  ADC_CCR_DELAY_1                     ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  ADC_CCR_DELAY_2                     ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  ADC_CCR_DELAY_3                     ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  ADC_CCR_DDS                         ((uint32_t)0x00002000)        /*!<DMA disable selection (Multi-ADC mode) */
+#define  ADC_CCR_DMA                         ((uint32_t)0x0000C000)        /*!<DMA[1:0] bits (Direct Memory Access mode for multimode) */
+#define  ADC_CCR_DMA_0                       ((uint32_t)0x00004000)        /*!<Bit 0 */
+#define  ADC_CCR_DMA_1                       ((uint32_t)0x00008000)        /*!<Bit 1 */
+#define  ADC_CCR_ADCPRE                      ((uint32_t)0x00030000)        /*!<ADCPRE[1:0] bits (ADC prescaler) */
+#define  ADC_CCR_ADCPRE_0                    ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  ADC_CCR_ADCPRE_1                    ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  ADC_CCR_VBATE                       ((uint32_t)0x00400000)        /*!<VBAT Enable */
+#define  ADC_CCR_TSVREFE                     ((uint32_t)0x00800000)        /*!<Temperature Sensor and VREFINT Enable */
+
+/*******************  Bit definition for ADC_CDR register  ********************/
+#define  ADC_CDR_DATA1                      ((uint32_t)0x0000FFFF)         /*!<1st data of a pair of regular conversions */
+#define  ADC_CDR_DATA2                      ((uint32_t)0xFFFF0000)         /*!<2nd data of a pair of regular conversions */
+
+/******************************************************************************/
+/*                                                                            */
+/*                         Controller Area Network                            */
+/*                                                                            */
+/******************************************************************************/
+/*!<CAN control and status registers */
+/*******************  Bit definition for CAN_MCR register  ********************/
+#define  CAN_MCR_INRQ                        ((uint32_t)0x00000001)        /*!<Initialization Request */
+#define  CAN_MCR_SLEEP                       ((uint32_t)0x00000002)        /*!<Sleep Mode Request */
+#define  CAN_MCR_TXFP                        ((uint32_t)0x00000004)        /*!<Transmit FIFO Priority */
+#define  CAN_MCR_RFLM                        ((uint32_t)0x00000008)        /*!<Receive FIFO Locked Mode */
+#define  CAN_MCR_NART                        ((uint32_t)0x00000010)        /*!<No Automatic Retransmission */
+#define  CAN_MCR_AWUM                        ((uint32_t)0x00000020)        /*!<Automatic Wakeup Mode */
+#define  CAN_MCR_ABOM                        ((uint32_t)0x00000040)        /*!<Automatic Bus-Off Management */
+#define  CAN_MCR_TTCM                        ((uint32_t)0x00000080)        /*!<Time Triggered Communication Mode */
+#define  CAN_MCR_RESET                       ((uint32_t)0x00008000)        /*!<bxCAN software master reset */
+#define  CAN_MCR_DBF                         ((uint32_t)0x00010000)        /*!<bxCAN Debug freeze */
+/*******************  Bit definition for CAN_MSR register  ********************/
+#define  CAN_MSR_INAK                        ((uint32_t)0x0001)            /*!<Initialization Acknowledge */
+#define  CAN_MSR_SLAK                        ((uint32_t)0x0002)            /*!<Sleep Acknowledge */
+#define  CAN_MSR_ERRI                        ((uint32_t)0x0004)            /*!<Error Interrupt */
+#define  CAN_MSR_WKUI                        ((uint32_t)0x0008)            /*!<Wakeup Interrupt */
+#define  CAN_MSR_SLAKI                       ((uint32_t)0x0010)            /*!<Sleep Acknowledge Interrupt */
+#define  CAN_MSR_TXM                         ((uint32_t)0x0100)            /*!<Transmit Mode */
+#define  CAN_MSR_RXM                         ((uint32_t)0x0200)            /*!<Receive Mode */
+#define  CAN_MSR_SAMP                        ((uint32_t)0x0400)            /*!<Last Sample Point */
+#define  CAN_MSR_RX                          ((uint32_t)0x0800)            /*!<CAN Rx Signal */
+
+/*******************  Bit definition for CAN_TSR register  ********************/
+#define  CAN_TSR_RQCP0                       ((uint32_t)0x00000001)        /*!<Request Completed Mailbox0 */
+#define  CAN_TSR_TXOK0                       ((uint32_t)0x00000002)        /*!<Transmission OK of Mailbox0 */
+#define  CAN_TSR_ALST0                       ((uint32_t)0x00000004)        /*!<Arbitration Lost for Mailbox0 */
+#define  CAN_TSR_TERR0                       ((uint32_t)0x00000008)        /*!<Transmission Error of Mailbox0 */
+#define  CAN_TSR_ABRQ0                       ((uint32_t)0x00000080)        /*!<Abort Request for Mailbox0 */
+#define  CAN_TSR_RQCP1                       ((uint32_t)0x00000100)        /*!<Request Completed Mailbox1 */
+#define  CAN_TSR_TXOK1                       ((uint32_t)0x00000200)        /*!<Transmission OK of Mailbox1 */
+#define  CAN_TSR_ALST1                       ((uint32_t)0x00000400)        /*!<Arbitration Lost for Mailbox1 */
+#define  CAN_TSR_TERR1                       ((uint32_t)0x00000800)        /*!<Transmission Error of Mailbox1 */
+#define  CAN_TSR_ABRQ1                       ((uint32_t)0x00008000)        /*!<Abort Request for Mailbox 1 */
+#define  CAN_TSR_RQCP2                       ((uint32_t)0x00010000)        /*!<Request Completed Mailbox2 */
+#define  CAN_TSR_TXOK2                       ((uint32_t)0x00020000)        /*!<Transmission OK of Mailbox 2 */
+#define  CAN_TSR_ALST2                       ((uint32_t)0x00040000)        /*!<Arbitration Lost for mailbox 2 */
+#define  CAN_TSR_TERR2                       ((uint32_t)0x00080000)        /*!<Transmission Error of Mailbox 2 */
+#define  CAN_TSR_ABRQ2                       ((uint32_t)0x00800000)        /*!<Abort Request for Mailbox 2 */
+#define  CAN_TSR_CODE                        ((uint32_t)0x03000000)        /*!<Mailbox Code */
+
+#define  CAN_TSR_TME                         ((uint32_t)0x1C000000)        /*!<TME[2:0] bits */
+#define  CAN_TSR_TME0                        ((uint32_t)0x04000000)        /*!<Transmit Mailbox 0 Empty */
+#define  CAN_TSR_TME1                        ((uint32_t)0x08000000)        /*!<Transmit Mailbox 1 Empty */
+#define  CAN_TSR_TME2                        ((uint32_t)0x10000000)        /*!<Transmit Mailbox 2 Empty */
+
+#define  CAN_TSR_LOW                         ((uint32_t)0xE0000000)        /*!<LOW[2:0] bits */
+#define  CAN_TSR_LOW0                        ((uint32_t)0x20000000)        /*!<Lowest Priority Flag for Mailbox 0 */
+#define  CAN_TSR_LOW1                        ((uint32_t)0x40000000)        /*!<Lowest Priority Flag for Mailbox 1 */
+#define  CAN_TSR_LOW2                        ((uint32_t)0x80000000)        /*!<Lowest Priority Flag for Mailbox 2 */
+
+/*******************  Bit definition for CAN_RF0R register  *******************/
+#define  CAN_RF0R_FMP0                       ((uint32_t)0x03)               /*!<FIFO 0 Message Pending */
+#define  CAN_RF0R_FULL0                      ((uint32_t)0x08)               /*!<FIFO 0 Full */
+#define  CAN_RF0R_FOVR0                      ((uint32_t)0x10)               /*!<FIFO 0 Overrun */
+#define  CAN_RF0R_RFOM0                      ((uint32_t)0x20)               /*!<Release FIFO 0 Output Mailbox */
+
+/*******************  Bit definition for CAN_RF1R register  *******************/
+#define  CAN_RF1R_FMP1                       ((uint32_t)0x03)               /*!<FIFO 1 Message Pending */
+#define  CAN_RF1R_FULL1                      ((uint32_t)0x08)               /*!<FIFO 1 Full */
+#define  CAN_RF1R_FOVR1                      ((uint32_t)0x10)               /*!<FIFO 1 Overrun */
+#define  CAN_RF1R_RFOM1                      ((uint32_t)0x20)               /*!<Release FIFO 1 Output Mailbox */
+
+/********************  Bit definition for CAN_IER register  *******************/
+#define  CAN_IER_TMEIE                       ((uint32_t)0x00000001)        /*!<Transmit Mailbox Empty Interrupt Enable */
+#define  CAN_IER_FMPIE0                      ((uint32_t)0x00000002)        /*!<FIFO Message Pending Interrupt Enable */
+#define  CAN_IER_FFIE0                       ((uint32_t)0x00000004)        /*!<FIFO Full Interrupt Enable */
+#define  CAN_IER_FOVIE0                      ((uint32_t)0x00000008)        /*!<FIFO Overrun Interrupt Enable */
+#define  CAN_IER_FMPIE1                      ((uint32_t)0x00000010)        /*!<FIFO Message Pending Interrupt Enable */
+#define  CAN_IER_FFIE1                       ((uint32_t)0x00000020)        /*!<FIFO Full Interrupt Enable */
+#define  CAN_IER_FOVIE1                      ((uint32_t)0x00000040)        /*!<FIFO Overrun Interrupt Enable */
+#define  CAN_IER_EWGIE                       ((uint32_t)0x00000100)        /*!<Error Warning Interrupt Enable */
+#define  CAN_IER_EPVIE                       ((uint32_t)0x00000200)        /*!<Error Passive Interrupt Enable */
+#define  CAN_IER_BOFIE                       ((uint32_t)0x00000400)        /*!<Bus-Off Interrupt Enable */
+#define  CAN_IER_LECIE                       ((uint32_t)0x00000800)        /*!<Last Error Code Interrupt Enable */
+#define  CAN_IER_ERRIE                       ((uint32_t)0x00008000)        /*!<Error Interrupt Enable */
+#define  CAN_IER_WKUIE                       ((uint32_t)0x00010000)        /*!<Wakeup Interrupt Enable */
+#define  CAN_IER_SLKIE                       ((uint32_t)0x00020000)        /*!<Sleep Interrupt Enable */
+#define  CAN_IER_EWGIE                       ((uint32_t)0x00000100)        /*!<Error warning interrupt enable */
+#define  CAN_IER_EPVIE                       ((uint32_t)0x00000200)        /*!<Error passive interrupt enable */
+#define  CAN_IER_BOFIE                       ((uint32_t)0x00000400)        /*!<Bus-off interrupt enable */
+#define  CAN_IER_LECIE                       ((uint32_t)0x00000800)        /*!<Last error code interrupt enable */
+#define  CAN_IER_ERRIE                       ((uint32_t)0x00008000)        /*!<Error interrupt enable */
+
+
+/********************  Bit definition for CAN_ESR register  *******************/
+#define  CAN_ESR_EWGF                        ((uint32_t)0x00000001)        /*!<Error Warning Flag */
+#define  CAN_ESR_EPVF                        ((uint32_t)0x00000002)        /*!<Error Passive Flag */
+#define  CAN_ESR_BOFF                        ((uint32_t)0x00000004)        /*!<Bus-Off Flag */
+
+#define  CAN_ESR_LEC                         ((uint32_t)0x00000070)        /*!<LEC[2:0] bits (Last Error Code) */
+#define  CAN_ESR_LEC_0                       ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  CAN_ESR_LEC_1                       ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  CAN_ESR_LEC_2                       ((uint32_t)0x00000040)        /*!<Bit 2 */
+
+#define  CAN_ESR_TEC                         ((uint32_t)0x00FF0000)        /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define  CAN_ESR_REC                         ((uint32_t)0xFF000000)        /*!<Receive Error Counter */
+
+/*******************  Bit definition for CAN_BTR register  ********************/
+#define  CAN_BTR_BRP                         ((uint32_t)0x000003FF)        /*!<Baud Rate Prescaler */
+#define  CAN_BTR_TS1                         ((uint32_t)0x000F0000)        /*!<Time Segment 1 */
+#define  CAN_BTR_TS1_0                       ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  CAN_BTR_TS1_1                       ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  CAN_BTR_TS1_2                       ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  CAN_BTR_TS1_3                       ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  CAN_BTR_TS2                         ((uint32_t)0x00700000)        /*!<Time Segment 2 */
+#define  CAN_BTR_TS2_0                       ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  CAN_BTR_TS2_1                       ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  CAN_BTR_TS2_2                       ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  CAN_BTR_SJW                         ((uint32_t)0x03000000)        /*!<Resynchronization Jump Width */
+#define  CAN_BTR_SJW_0                       ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  CAN_BTR_SJW_1                       ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  CAN_BTR_LBKM                        ((uint32_t)0x40000000)        /*!<Loop Back Mode (Debug) */
+#define  CAN_BTR_SILM                        ((uint32_t)0x80000000)        /*!<Silent Mode */
+
+
+/*!<Mailbox registers */
+/******************  Bit definition for CAN_TI0R register  ********************/
+#define  CAN_TI0R_TXRQ                       ((uint32_t)0x00000001)        /*!<Transmit Mailbox Request */
+#define  CAN_TI0R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request */
+#define  CAN_TI0R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension */
+#define  CAN_TI0R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended Identifier */
+#define  CAN_TI0R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/******************  Bit definition for CAN_TDT0R register  *******************/
+#define  CAN_TDT0R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code */
+#define  CAN_TDT0R_TGT                       ((uint32_t)0x00000100)        /*!<Transmit Global Time */
+#define  CAN_TDT0R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp */
+
+/******************  Bit definition for CAN_TDL0R register  *******************/
+#define  CAN_TDL0R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_TDL0R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_TDL0R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_TDL0R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/******************  Bit definition for CAN_TDH0R register  *******************/
+#define  CAN_TDH0R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_TDH0R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_TDH0R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_TDH0R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*******************  Bit definition for CAN_TI1R register  *******************/
+#define  CAN_TI1R_TXRQ                       ((uint32_t)0x00000001)        /*!<Transmit Mailbox Request */
+#define  CAN_TI1R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request */
+#define  CAN_TI1R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension */
+#define  CAN_TI1R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended Identifier */
+#define  CAN_TI1R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_TDT1R register  ******************/
+#define  CAN_TDT1R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code */
+#define  CAN_TDT1R_TGT                       ((uint32_t)0x00000100)        /*!<Transmit Global Time */
+#define  CAN_TDT1R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp */
+
+/*******************  Bit definition for CAN_TDL1R register  ******************/
+#define  CAN_TDL1R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_TDL1R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_TDL1R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_TDL1R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/*******************  Bit definition for CAN_TDH1R register  ******************/
+#define  CAN_TDH1R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_TDH1R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_TDH1R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_TDH1R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*******************  Bit definition for CAN_TI2R register  *******************/
+#define  CAN_TI2R_TXRQ                       ((uint32_t)0x00000001)        /*!<Transmit Mailbox Request */
+#define  CAN_TI2R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request */
+#define  CAN_TI2R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension */
+#define  CAN_TI2R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended identifier */
+#define  CAN_TI2R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_TDT2R register  ******************/
+#define  CAN_TDT2R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code */
+#define  CAN_TDT2R_TGT                       ((uint32_t)0x00000100)        /*!<Transmit Global Time */
+#define  CAN_TDT2R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp */
+
+/*******************  Bit definition for CAN_TDL2R register  ******************/
+#define  CAN_TDL2R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_TDL2R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_TDL2R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_TDL2R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/*******************  Bit definition for CAN_TDH2R register  ******************/
+#define  CAN_TDH2R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_TDH2R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_TDH2R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_TDH2R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*******************  Bit definition for CAN_RI0R register  *******************/
+#define  CAN_RI0R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request */
+#define  CAN_RI0R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension */
+#define  CAN_RI0R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended Identifier */
+#define  CAN_RI0R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_RDT0R register  ******************/
+#define  CAN_RDT0R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code */
+#define  CAN_RDT0R_FMI                       ((uint32_t)0x0000FF00)        /*!<Filter Match Index */
+#define  CAN_RDT0R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp */
+
+/*******************  Bit definition for CAN_RDL0R register  ******************/
+#define  CAN_RDL0R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_RDL0R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_RDL0R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_RDL0R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/*******************  Bit definition for CAN_RDH0R register  ******************/
+#define  CAN_RDH0R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_RDH0R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_RDH0R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_RDH0R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*******************  Bit definition for CAN_RI1R register  *******************/
+#define  CAN_RI1R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request */
+#define  CAN_RI1R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension */
+#define  CAN_RI1R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended identifier */
+#define  CAN_RI1R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_RDT1R register  ******************/
+#define  CAN_RDT1R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code */
+#define  CAN_RDT1R_FMI                       ((uint32_t)0x0000FF00)        /*!<Filter Match Index */
+#define  CAN_RDT1R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp */
+
+/*******************  Bit definition for CAN_RDL1R register  ******************/
+#define  CAN_RDL1R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_RDL1R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_RDL1R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_RDL1R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/*******************  Bit definition for CAN_RDH1R register  ******************/
+#define  CAN_RDH1R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_RDH1R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_RDH1R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_RDH1R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/*******************  Bit definition for CAN_FMR register  ********************/
+#define  CAN_FMR_FINIT                       ((uint32_t)0x01)               /*!<Filter Init Mode */
+#define  CAN_FMR_CAN2SB                      ((uint32_t)0x00003F00)        /*!<CAN2 start bank */
+
+/*******************  Bit definition for CAN_FM1R register  *******************/
+#define  CAN_FM1R_FBM                        ((uint32_t)0x0FFFFFFF)        /*!<Filter Mode */
+#define  CAN_FM1R_FBM0                       ((uint32_t)0x00000001)        /*!<Filter Init Mode bit 0 */
+#define  CAN_FM1R_FBM1                       ((uint32_t)0x00000002)        /*!<Filter Init Mode bit 1 */
+#define  CAN_FM1R_FBM2                       ((uint32_t)0x00000004)        /*!<Filter Init Mode bit 2 */
+#define  CAN_FM1R_FBM3                       ((uint32_t)0x00000008)        /*!<Filter Init Mode bit 3 */
+#define  CAN_FM1R_FBM4                       ((uint32_t)0x00000010)        /*!<Filter Init Mode bit 4 */
+#define  CAN_FM1R_FBM5                       ((uint32_t)0x00000020)        /*!<Filter Init Mode bit 5 */
+#define  CAN_FM1R_FBM6                       ((uint32_t)0x00000040)        /*!<Filter Init Mode bit 6 */
+#define  CAN_FM1R_FBM7                       ((uint32_t)0x00000080)        /*!<Filter Init Mode bit 7 */
+#define  CAN_FM1R_FBM8                       ((uint32_t)0x00000100)        /*!<Filter Init Mode bit 8 */
+#define  CAN_FM1R_FBM9                       ((uint32_t)0x00000200)        /*!<Filter Init Mode bit 9 */
+#define  CAN_FM1R_FBM10                      ((uint32_t)0x00000400)        /*!<Filter Init Mode bit 10 */
+#define  CAN_FM1R_FBM11                      ((uint32_t)0x00000800)        /*!<Filter Init Mode bit 11 */
+#define  CAN_FM1R_FBM12                      ((uint32_t)0x00001000)        /*!<Filter Init Mode bit 12 */
+#define  CAN_FM1R_FBM13                      ((uint32_t)0x00002000)        /*!<Filter Init Mode bit 13 */
+#define  CAN_FM1R_FBM14                      ((uint32_t)0x00004000)        /*!<Filter Init Mode bit 14 */
+#define  CAN_FM1R_FBM15                      ((uint32_t)0x00008000)        /*!<Filter Init Mode bit 15 */
+#define  CAN_FM1R_FBM16                      ((uint32_t)0x00010000)        /*!<Filter Init Mode bit 16 */
+#define  CAN_FM1R_FBM17                      ((uint32_t)0x00020000)        /*!<Filter Init Mode bit 17 */
+#define  CAN_FM1R_FBM18                      ((uint32_t)0x00040000)        /*!<Filter Init Mode bit 18 */
+#define  CAN_FM1R_FBM19                      ((uint32_t)0x00080000)        /*!<Filter Init Mode bit 19 */
+#define  CAN_FM1R_FBM20                      ((uint32_t)0x00100000)        /*!<Filter Init Mode bit 20 */
+#define  CAN_FM1R_FBM21                      ((uint32_t)0x00200000)        /*!<Filter Init Mode bit 21 */
+#define  CAN_FM1R_FBM22                      ((uint32_t)0x00400000)        /*!<Filter Init Mode bit 22 */
+#define  CAN_FM1R_FBM23                      ((uint32_t)0x00800000)        /*!<Filter Init Mode bit 23 */
+#define  CAN_FM1R_FBM24                      ((uint32_t)0x01000000)        /*!<Filter Init Mode bit 24 */
+#define  CAN_FM1R_FBM25                      ((uint32_t)0x02000000)        /*!<Filter Init Mode bit 25 */
+#define  CAN_FM1R_FBM26                      ((uint32_t)0x04000000)        /*!<Filter Init Mode bit 26 */
+#define  CAN_FM1R_FBM27                      ((uint32_t)0x08000000)        /*!<Filter Init Mode bit 27 */
+
+/*******************  Bit definition for CAN_FS1R register  *******************/
+#define  CAN_FS1R_FSC                        ((uint32_t)0x0FFFFFFF)        /*!<Filter Scale Configuration */
+#define  CAN_FS1R_FSC0                       ((uint32_t)0x00000001)        /*!<Filter Scale Configuration bit 0 */
+#define  CAN_FS1R_FSC1                       ((uint32_t)0x00000002)        /*!<Filter Scale Configuration bit 1 */
+#define  CAN_FS1R_FSC2                       ((uint32_t)0x00000004)        /*!<Filter Scale Configuration bit 2 */
+#define  CAN_FS1R_FSC3                       ((uint32_t)0x00000008)        /*!<Filter Scale Configuration bit 3 */
+#define  CAN_FS1R_FSC4                       ((uint32_t)0x00000010)        /*!<Filter Scale Configuration bit 4 */
+#define  CAN_FS1R_FSC5                       ((uint32_t)0x00000020)        /*!<Filter Scale Configuration bit 5 */
+#define  CAN_FS1R_FSC6                       ((uint32_t)0x00000040)        /*!<Filter Scale Configuration bit 6 */
+#define  CAN_FS1R_FSC7                       ((uint32_t)0x00000080)        /*!<Filter Scale Configuration bit 7 */
+#define  CAN_FS1R_FSC8                       ((uint32_t)0x00000100)        /*!<Filter Scale Configuration bit 8 */
+#define  CAN_FS1R_FSC9                       ((uint32_t)0x00000200)        /*!<Filter Scale Configuration bit 9 */
+#define  CAN_FS1R_FSC10                      ((uint32_t)0x00000400)        /*!<Filter Scale Configuration bit 10 */
+#define  CAN_FS1R_FSC11                      ((uint32_t)0x00000800)        /*!<Filter Scale Configuration bit 11 */
+#define  CAN_FS1R_FSC12                      ((uint32_t)0x00001000)        /*!<Filter Scale Configuration bit 12 */
+#define  CAN_FS1R_FSC13                      ((uint32_t)0x00002000)        /*!<Filter Scale Configuration bit 13 */
+#define  CAN_FS1R_FSC14                      ((uint32_t)0x00004000)        /*!<Filter Scale Configuration bit 14 */
+#define  CAN_FS1R_FSC15                      ((uint32_t)0x00008000)        /*!<Filter Scale Configuration bit 15 */
+#define  CAN_FS1R_FSC16                      ((uint32_t)0x00010000)        /*!<Filter Scale Configuration bit 16 */
+#define  CAN_FS1R_FSC17                      ((uint32_t)0x00020000)        /*!<Filter Scale Configuration bit 17 */
+#define  CAN_FS1R_FSC18                      ((uint32_t)0x00040000)        /*!<Filter Scale Configuration bit 18 */
+#define  CAN_FS1R_FSC19                      ((uint32_t)0x00080000)        /*!<Filter Scale Configuration bit 19 */
+#define  CAN_FS1R_FSC20                      ((uint32_t)0x00100000)        /*!<Filter Scale Configuration bit 20 */
+#define  CAN_FS1R_FSC21                      ((uint32_t)0x00200000)        /*!<Filter Scale Configuration bit 21 */
+#define  CAN_FS1R_FSC22                      ((uint32_t)0x00400000)        /*!<Filter Scale Configuration bit 22 */
+#define  CAN_FS1R_FSC23                      ((uint32_t)0x00800000)        /*!<Filter Scale Configuration bit 23 */
+#define  CAN_FS1R_FSC24                      ((uint32_t)0x01000000)        /*!<Filter Scale Configuration bit 24 */
+#define  CAN_FS1R_FSC25                      ((uint32_t)0x02000000)        /*!<Filter Scale Configuration bit 25 */
+#define  CAN_FS1R_FSC26                      ((uint32_t)0x04000000)        /*!<Filter Scale Configuration bit 26 */
+#define  CAN_FS1R_FSC27                      ((uint32_t)0x08000000)        /*!<Filter Scale Configuration bit 27 */
+
+/******************  Bit definition for CAN_FFA1R register  *******************/
+#define  CAN_FFA1R_FFA                        ((uint32_t)0x0FFFFFFF)        /*!<Filter FIFO Assignment */
+#define  CAN_FFA1R_FFA0                       ((uint32_t)0x00000001)        /*!<Filter FIFO Assignment bit 0 */
+#define  CAN_FFA1R_FFA1                       ((uint32_t)0x00000002)        /*!<Filter FIFO Assignment bit 1 */
+#define  CAN_FFA1R_FFA2                       ((uint32_t)0x00000004)        /*!<Filter FIFO Assignment bit 2 */
+#define  CAN_FFA1R_FFA3                       ((uint32_t)0x00000008)        /*!<Filter FIFO Assignment bit 3 */
+#define  CAN_FFA1R_FFA4                       ((uint32_t)0x00000010)        /*!<Filter FIFO Assignment bit 4 */
+#define  CAN_FFA1R_FFA5                       ((uint32_t)0x00000020)        /*!<Filter FIFO Assignment bit 5 */
+#define  CAN_FFA1R_FFA6                       ((uint32_t)0x00000040)        /*!<Filter FIFO Assignment bit 6 */
+#define  CAN_FFA1R_FFA7                       ((uint32_t)0x00000080)        /*!<Filter FIFO Assignment bit 7 */
+#define  CAN_FFA1R_FFA8                       ((uint32_t)0x00000100)        /*!<Filter FIFO Assignment bit 8 */
+#define  CAN_FFA1R_FFA9                       ((uint32_t)0x00000200)        /*!<Filter FIFO Assignment bit 9 */
+#define  CAN_FFA1R_FFA10                      ((uint32_t)0x00000400)        /*!<Filter FIFO Assignment bit 10 */
+#define  CAN_FFA1R_FFA11                      ((uint32_t)0x00000800)        /*!<Filter FIFO Assignment bit 11 */
+#define  CAN_FFA1R_FFA12                      ((uint32_t)0x00001000)        /*!<Filter FIFO Assignment bit 12 */
+#define  CAN_FFA1R_FFA13                      ((uint32_t)0x00002000)        /*!<Filter FIFO Assignment bit 13 */
+#define  CAN_FFA1R_FFA14                      ((uint32_t)0x00004000)        /*!<Filter FIFO Assignment bit 14 */
+#define  CAN_FFA1R_FFA15                      ((uint32_t)0x00008000)        /*!<Filter FIFO Assignment bit 15 */
+#define  CAN_FFA1R_FFA16                      ((uint32_t)0x00010000)        /*!<Filter FIFO Assignment bit 16 */
+#define  CAN_FFA1R_FFA17                      ((uint32_t)0x00020000)        /*!<Filter FIFO Assignment bit 17 */
+#define  CAN_FFA1R_FFA18                      ((uint32_t)0x00040000)        /*!<Filter FIFO Assignment bit 18 */
+#define  CAN_FFA1R_FFA19                      ((uint32_t)0x00080000)        /*!<Filter FIFO Assignment bit 19 */
+#define  CAN_FFA1R_FFA20                      ((uint32_t)0x00100000)        /*!<Filter FIFO Assignment bit 20 */
+#define  CAN_FFA1R_FFA21                      ((uint32_t)0x00200000)        /*!<Filter FIFO Assignment bit 21 */
+#define  CAN_FFA1R_FFA22                      ((uint32_t)0x00400000)        /*!<Filter FIFO Assignment bit 22 */
+#define  CAN_FFA1R_FFA23                      ((uint32_t)0x00800000)        /*!<Filter FIFO Assignment bit 23 */
+#define  CAN_FFA1R_FFA24                      ((uint32_t)0x01000000)        /*!<Filter FIFO Assignment bit 24 */
+#define  CAN_FFA1R_FFA25                      ((uint32_t)0x02000000)        /*!<Filter FIFO Assignment bit 25 */
+#define  CAN_FFA1R_FFA26                      ((uint32_t)0x04000000)        /*!<Filter FIFO Assignment bit 26 */
+#define  CAN_FFA1R_FFA27                      ((uint32_t)0x08000000)        /*!<Filter FIFO Assignment bit 27 */
+
+/*******************  Bit definition for CAN_FA1R register  *******************/
+#define  CAN_FA1R_FACT                        ((uint32_t)0x0FFFFFFF)        /*!<Filter Active */
+#define  CAN_FA1R_FACT0                       ((uint32_t)0x00000001)        /*!<Filter Active bit 0 */
+#define  CAN_FA1R_FACT1                       ((uint32_t)0x00000002)        /*!<Filter Active bit 1 */
+#define  CAN_FA1R_FACT2                       ((uint32_t)0x00000004)        /*!<Filter Active bit 2 */
+#define  CAN_FA1R_FACT3                       ((uint32_t)0x00000008)        /*!<Filter Active bit 3 */
+#define  CAN_FA1R_FACT4                       ((uint32_t)0x00000010)        /*!<Filter Active bit 4 */
+#define  CAN_FA1R_FACT5                       ((uint32_t)0x00000020)        /*!<Filter Active bit 5 */
+#define  CAN_FA1R_FACT6                       ((uint32_t)0x00000040)        /*!<Filter Active bit 6 */
+#define  CAN_FA1R_FACT7                       ((uint32_t)0x00000080)        /*!<Filter Active bit 7 */
+#define  CAN_FA1R_FACT8                       ((uint32_t)0x00000100)        /*!<Filter Active bit 8 */
+#define  CAN_FA1R_FACT9                       ((uint32_t)0x00000200)        /*!<Filter Active bit 9 */
+#define  CAN_FA1R_FACT10                      ((uint32_t)0x00000400)        /*!<Filter Active bit 10 */
+#define  CAN_FA1R_FACT11                      ((uint32_t)0x00000800)        /*!<Filter Active bit 11 */
+#define  CAN_FA1R_FACT12                      ((uint32_t)0x00001000)        /*!<Filter Active bit 12 */
+#define  CAN_FA1R_FACT13                      ((uint32_t)0x00002000)        /*!<Filter Active bit 13 */
+#define  CAN_FA1R_FACT14                      ((uint32_t)0x00004000)        /*!<Filter Active bit 14 */
+#define  CAN_FA1R_FACT15                      ((uint32_t)0x00008000)        /*!<Filter Active bit 15 */
+#define  CAN_FA1R_FACT16                      ((uint32_t)0x00010000)        /*!<Filter Active bit 16 */
+#define  CAN_FA1R_FACT17                      ((uint32_t)0x00020000)        /*!<Filter Active bit 17 */
+#define  CAN_FA1R_FACT18                      ((uint32_t)0x00040000)        /*!<Filter Active bit 18 */
+#define  CAN_FA1R_FACT19                      ((uint32_t)0x00080000)        /*!<Filter Active bit 19 */
+#define  CAN_FA1R_FACT20                      ((uint32_t)0x00100000)        /*!<Filter Active bit 20 */
+#define  CAN_FA1R_FACT21                      ((uint32_t)0x00200000)        /*!<Filter Active bit 21 */
+#define  CAN_FA1R_FACT22                      ((uint32_t)0x00400000)        /*!<Filter Active bit 22 */
+#define  CAN_FA1R_FACT23                      ((uint32_t)0x00800000)        /*!<Filter Active bit 23 */
+#define  CAN_FA1R_FACT24                      ((uint32_t)0x01000000)        /*!<Filter Active bit 24 */
+#define  CAN_FA1R_FACT25                      ((uint32_t)0x02000000)        /*!<Filter Active bit 25 */
+#define  CAN_FA1R_FACT26                      ((uint32_t)0x04000000)        /*!<Filter Active bit 26 */
+#define  CAN_FA1R_FACT27                      ((uint32_t)0x08000000)        /*!<Filter Active bit 27 */
+
+/*******************  Bit definition for CAN_F0R1 register  *******************/
+#define  CAN_F0R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F0R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F0R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F0R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F0R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F0R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F0R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F0R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F0R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F0R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F0R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F0R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F0R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F0R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F0R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F0R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F0R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F0R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F0R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F0R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F0R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F0R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F0R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F0R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F0R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F0R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F0R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F0R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F0R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F0R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F0R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F0R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F1R1 register  *******************/
+#define  CAN_F1R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F1R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F1R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F1R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F1R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F1R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F1R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F1R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F1R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F1R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F1R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F1R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F1R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F1R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F1R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F1R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F1R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F1R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F1R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F1R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F1R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F1R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F1R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F1R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F1R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F1R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F1R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F1R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F1R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F1R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F1R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F1R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F2R1 register  *******************/
+#define  CAN_F2R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F2R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F2R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F2R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F2R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F2R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F2R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F2R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F2R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F2R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F2R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F2R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F2R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F2R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F2R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F2R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F2R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F2R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F2R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F2R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F2R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F2R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F2R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F2R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F2R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F2R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F2R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F2R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F2R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F2R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F2R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F2R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F3R1 register  *******************/
+#define  CAN_F3R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F3R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F3R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F3R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F3R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F3R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F3R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F3R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F3R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F3R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F3R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F3R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F3R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F3R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F3R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F3R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F3R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F3R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F3R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F3R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F3R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F3R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F3R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F3R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F3R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F3R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F3R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F3R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F3R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F3R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F3R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F3R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F4R1 register  *******************/
+#define  CAN_F4R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F4R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F4R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F4R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F4R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F4R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F4R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F4R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F4R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F4R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F4R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F4R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F4R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F4R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F4R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F4R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F4R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F4R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F4R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F4R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F4R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F4R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F4R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F4R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F4R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F4R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F4R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F4R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F4R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F4R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F4R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F4R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F5R1 register  *******************/
+#define  CAN_F5R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F5R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F5R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F5R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F5R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F5R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F5R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F5R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F5R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F5R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F5R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F5R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F5R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F5R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F5R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F5R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F5R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F5R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F5R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F5R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F5R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F5R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F5R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F5R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F5R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F5R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F5R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F5R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F5R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F5R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F5R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F5R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F6R1 register  *******************/
+#define  CAN_F6R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F6R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F6R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F6R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F6R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F6R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F6R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F6R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F6R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F6R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F6R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F6R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F6R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F6R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F6R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F6R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F6R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F6R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F6R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F6R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F6R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F6R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F6R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F6R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F6R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F6R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F6R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F6R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F6R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F6R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F6R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F6R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F7R1 register  *******************/
+#define  CAN_F7R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F7R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F7R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F7R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F7R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F7R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F7R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F7R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F7R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F7R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F7R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F7R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F7R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F7R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F7R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F7R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F7R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F7R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F7R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F7R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F7R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F7R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F7R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F7R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F7R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F7R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F7R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F7R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F7R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F7R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F7R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F7R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F8R1 register  *******************/
+#define  CAN_F8R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F8R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F8R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F8R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F8R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F8R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F8R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F8R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F8R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F8R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F8R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F8R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F8R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F8R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F8R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F8R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F8R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F8R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F8R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F8R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F8R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F8R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F8R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F8R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F8R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F8R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F8R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F8R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F8R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F8R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F8R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F8R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F9R1 register  *******************/
+#define  CAN_F9R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F9R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F9R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F9R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F9R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F9R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F9R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F9R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F9R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F9R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F9R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F9R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F9R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F9R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F9R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F9R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F9R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F9R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F9R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F9R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F9R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F9R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F9R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F9R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F9R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F9R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F9R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F9R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F9R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F9R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F9R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F9R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F10R1 register  ******************/
+#define  CAN_F10R1_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F10R1_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F10R1_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F10R1_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F10R1_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F10R1_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F10R1_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F10R1_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F10R1_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F10R1_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F10R1_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F10R1_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F10R1_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F10R1_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F10R1_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F10R1_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F10R1_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F10R1_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F10R1_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F10R1_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F10R1_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F10R1_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F10R1_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F10R1_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F10R1_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F10R1_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F10R1_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F10R1_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F10R1_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F10R1_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F10R1_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F10R1_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F11R1 register  ******************/
+#define  CAN_F11R1_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F11R1_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F11R1_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F11R1_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F11R1_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F11R1_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F11R1_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F11R1_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F11R1_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F11R1_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F11R1_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F11R1_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F11R1_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F11R1_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F11R1_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F11R1_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F11R1_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F11R1_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F11R1_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F11R1_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F11R1_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F11R1_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F11R1_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F11R1_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F11R1_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F11R1_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F11R1_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F11R1_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F11R1_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F11R1_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F11R1_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F11R1_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F12R1 register  ******************/
+#define  CAN_F12R1_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F12R1_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F12R1_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F12R1_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F12R1_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F12R1_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F12R1_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F12R1_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F12R1_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F12R1_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F12R1_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F12R1_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F12R1_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F12R1_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F12R1_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F12R1_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F12R1_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F12R1_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F12R1_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F12R1_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F12R1_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F12R1_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F12R1_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F12R1_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F12R1_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F12R1_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F12R1_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F12R1_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F12R1_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F12R1_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F12R1_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F12R1_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F13R1 register  ******************/
+#define  CAN_F13R1_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F13R1_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F13R1_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F13R1_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F13R1_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F13R1_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F13R1_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F13R1_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F13R1_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F13R1_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F13R1_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F13R1_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F13R1_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F13R1_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F13R1_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F13R1_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F13R1_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F13R1_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F13R1_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F13R1_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F13R1_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F13R1_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F13R1_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F13R1_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F13R1_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F13R1_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F13R1_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F13R1_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F13R1_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F13R1_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F13R1_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F13R1_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F0R2 register  *******************/
+#define  CAN_F0R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F0R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F0R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F0R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F0R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F0R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F0R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F0R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F0R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F0R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F0R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F0R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F0R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F0R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F0R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F0R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F0R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F0R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F0R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F0R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F0R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F0R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F0R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F0R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F0R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F0R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F0R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F0R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F0R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F0R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F0R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F0R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F1R2 register  *******************/
+#define  CAN_F1R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F1R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F1R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F1R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F1R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F1R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F1R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F1R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F1R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F1R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F1R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F1R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F1R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F1R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F1R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F1R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F1R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F1R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F1R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F1R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F1R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F1R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F1R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F1R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F1R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F1R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F1R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F1R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F1R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F1R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F1R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F1R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F2R2 register  *******************/
+#define  CAN_F2R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F2R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F2R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F2R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F2R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F2R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F2R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F2R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F2R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F2R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F2R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F2R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F2R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F2R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F2R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F2R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F2R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F2R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F2R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F2R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F2R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F2R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F2R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F2R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F2R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F2R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F2R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F2R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F2R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F2R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F2R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F2R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F3R2 register  *******************/
+#define  CAN_F3R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F3R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F3R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F3R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F3R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F3R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F3R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F3R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F3R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F3R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F3R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F3R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F3R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F3R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F3R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F3R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F3R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F3R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F3R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F3R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F3R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F3R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F3R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F3R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F3R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F3R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F3R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F3R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F3R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F3R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F3R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F3R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F4R2 register  *******************/
+#define  CAN_F4R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F4R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F4R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F4R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F4R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F4R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F4R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F4R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F4R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F4R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F4R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F4R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F4R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F4R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F4R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F4R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F4R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F4R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F4R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F4R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F4R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F4R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F4R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F4R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F4R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F4R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F4R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F4R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F4R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F4R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F4R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F4R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F5R2 register  *******************/
+#define  CAN_F5R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F5R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F5R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F5R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F5R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F5R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F5R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F5R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F5R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F5R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F5R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F5R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F5R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F5R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F5R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F5R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F5R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F5R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F5R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F5R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F5R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F5R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F5R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F5R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F5R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F5R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F5R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F5R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F5R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F5R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F5R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F5R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F6R2 register  *******************/
+#define  CAN_F6R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F6R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F6R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F6R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F6R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F6R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F6R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F6R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F6R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F6R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F6R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F6R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F6R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F6R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F6R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F6R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F6R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F6R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F6R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F6R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F6R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F6R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F6R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F6R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F6R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F6R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F6R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F6R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F6R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F6R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F6R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F6R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F7R2 register  *******************/
+#define  CAN_F7R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F7R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F7R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F7R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F7R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F7R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F7R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F7R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F7R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F7R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F7R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F7R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F7R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F7R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F7R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F7R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F7R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F7R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F7R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F7R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F7R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F7R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F7R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F7R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F7R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F7R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F7R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F7R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F7R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F7R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F7R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F7R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F8R2 register  *******************/
+#define  CAN_F8R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F8R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F8R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F8R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F8R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F8R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F8R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F8R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F8R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F8R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F8R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F8R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F8R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F8R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F8R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F8R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F8R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F8R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F8R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F8R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F8R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F8R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F8R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F8R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F8R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F8R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F8R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F8R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F8R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F8R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F8R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F8R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F9R2 register  *******************/
+#define  CAN_F9R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F9R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F9R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F9R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F9R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F9R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F9R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F9R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F9R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F9R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F9R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F9R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F9R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F9R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F9R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F9R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F9R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F9R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F9R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F9R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F9R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F9R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F9R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F9R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F9R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F9R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F9R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F9R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F9R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F9R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F9R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F9R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F10R2 register  ******************/
+#define  CAN_F10R2_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F10R2_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F10R2_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F10R2_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F10R2_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F10R2_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F10R2_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F10R2_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F10R2_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F10R2_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F10R2_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F10R2_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F10R2_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F10R2_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F10R2_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F10R2_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F10R2_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F10R2_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F10R2_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F10R2_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F10R2_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F10R2_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F10R2_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F10R2_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F10R2_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F10R2_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F10R2_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F10R2_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F10R2_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F10R2_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F10R2_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F10R2_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F11R2 register  ******************/
+#define  CAN_F11R2_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F11R2_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F11R2_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F11R2_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F11R2_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F11R2_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F11R2_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F11R2_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F11R2_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F11R2_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F11R2_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F11R2_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F11R2_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F11R2_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F11R2_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F11R2_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F11R2_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F11R2_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F11R2_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F11R2_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F11R2_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F11R2_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F11R2_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F11R2_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F11R2_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F11R2_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F11R2_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F11R2_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F11R2_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F11R2_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F11R2_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F11R2_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F12R2 register  ******************/
+#define  CAN_F12R2_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F12R2_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F12R2_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F12R2_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F12R2_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F12R2_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F12R2_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F12R2_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F12R2_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F12R2_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F12R2_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F12R2_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F12R2_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F12R2_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F12R2_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F12R2_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F12R2_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F12R2_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F12R2_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F12R2_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F12R2_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F12R2_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F12R2_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F12R2_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F12R2_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F12R2_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F12R2_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F12R2_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F12R2_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F12R2_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F12R2_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F12R2_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F13R2 register  ******************/
+#define  CAN_F13R2_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F13R2_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F13R2_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F13R2_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F13R2_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F13R2_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F13R2_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F13R2_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F13R2_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F13R2_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F13R2_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F13R2_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F13R2_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F13R2_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F13R2_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F13R2_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F13R2_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F13R2_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F13R2_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F13R2_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F13R2_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F13R2_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F13R2_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F13R2_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F13R2_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F13R2_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F13R2_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F13R2_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F13R2_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F13R2_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F13R2_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F13R2_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/******************************************************************************/
+/*                                                                            */
+/*                          CRC calculation unit                              */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for CRC_DR register  *********************/
+#define  CRC_DR_DR                           ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+
+/*******************  Bit definition for CRC_IDR register  ********************/
+#define  CRC_IDR_IDR                         ((uint32_t)0xFF)        /*!< General-purpose 8-bit data register bits */
+
+
+/********************  Bit definition for CRC_CR register  ********************/
+#define  CRC_CR_RESET                        ((uint32_t)0x01)        /*!< RESET bit */
+
+/******************************************************************************/
+/*                                                                            */
+/*                      Digital to Analog Converter                           */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for DAC_CR register  ********************/
+#define  DAC_CR_EN1                          ((uint32_t)0x00000001)        /*!<DAC channel1 enable */
+#define  DAC_CR_BOFF1                        ((uint32_t)0x00000002)        /*!<DAC channel1 output buffer disable */
+#define  DAC_CR_TEN1                         ((uint32_t)0x00000004)        /*!<DAC channel1 Trigger enable */
+
+#define  DAC_CR_TSEL1                        ((uint32_t)0x00000038)        /*!<TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define  DAC_CR_TSEL1_0                      ((uint32_t)0x00000008)        /*!<Bit 0 */
+#define  DAC_CR_TSEL1_1                      ((uint32_t)0x00000010)        /*!<Bit 1 */
+#define  DAC_CR_TSEL1_2                      ((uint32_t)0x00000020)        /*!<Bit 2 */
+
+#define  DAC_CR_WAVE1                        ((uint32_t)0x000000C0)        /*!<WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define  DAC_CR_WAVE1_0                      ((uint32_t)0x00000040)        /*!<Bit 0 */
+#define  DAC_CR_WAVE1_1                      ((uint32_t)0x00000080)        /*!<Bit 1 */
+
+#define  DAC_CR_MAMP1                        ((uint32_t)0x00000F00)        /*!<MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define  DAC_CR_MAMP1_0                      ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  DAC_CR_MAMP1_1                      ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  DAC_CR_MAMP1_2                      ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  DAC_CR_MAMP1_3                      ((uint32_t)0x00000800)        /*!<Bit 3 */
+
+#define  DAC_CR_DMAEN1                       ((uint32_t)0x00001000)        /*!<DAC channel1 DMA enable */
+#define  DAC_CR_EN2                          ((uint32_t)0x00010000)        /*!<DAC channel2 enable */
+#define  DAC_CR_BOFF2                        ((uint32_t)0x00020000)        /*!<DAC channel2 output buffer disable */
+#define  DAC_CR_TEN2                         ((uint32_t)0x00040000)        /*!<DAC channel2 Trigger enable */
+
+#define  DAC_CR_TSEL2                        ((uint32_t)0x00380000)        /*!<TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define  DAC_CR_TSEL2_0                      ((uint32_t)0x00080000)        /*!<Bit 0 */
+#define  DAC_CR_TSEL2_1                      ((uint32_t)0x00100000)        /*!<Bit 1 */
+#define  DAC_CR_TSEL2_2                      ((uint32_t)0x00200000)        /*!<Bit 2 */
+
+#define  DAC_CR_WAVE2                        ((uint32_t)0x00C00000)        /*!<WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define  DAC_CR_WAVE2_0                      ((uint32_t)0x00400000)        /*!<Bit 0 */
+#define  DAC_CR_WAVE2_1                      ((uint32_t)0x00800000)        /*!<Bit 1 */
+
+#define  DAC_CR_MAMP2                        ((uint32_t)0x0F000000)        /*!<MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define  DAC_CR_MAMP2_0                      ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  DAC_CR_MAMP2_1                      ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  DAC_CR_MAMP2_2                      ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  DAC_CR_MAMP2_3                      ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  DAC_CR_DMAEN2                       ((uint32_t)0x10000000)        /*!<DAC channel2 DMA enabled */
+
+/*****************  Bit definition for DAC_SWTRIGR register  ******************/
+#define  DAC_SWTRIGR_SWTRIG1                 ((uint32_t)0x01)               /*!<DAC channel1 software trigger */
+#define  DAC_SWTRIGR_SWTRIG2                 ((uint32_t)0x02)               /*!<DAC channel2 software trigger */
+
+/*****************  Bit definition for DAC_DHR12R1 register  ******************/
+#define  DAC_DHR12R1_DACC1DHR                ((uint32_t)0x0FFF)            /*!<DAC channel1 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12L1 register  ******************/
+#define  DAC_DHR12L1_DACC1DHR                ((uint32_t)0xFFF0)            /*!<DAC channel1 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8R1 register  ******************/
+#define  DAC_DHR8R1_DACC1DHR                 ((uint32_t)0xFF)               /*!<DAC channel1 8-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12R2 register  ******************/
+#define  DAC_DHR12R2_DACC2DHR                ((uint32_t)0x0FFF)            /*!<DAC channel2 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12L2 register  ******************/
+#define  DAC_DHR12L2_DACC2DHR                ((uint32_t)0xFFF0)            /*!<DAC channel2 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8R2 register  ******************/
+#define  DAC_DHR8R2_DACC2DHR                 ((uint32_t)0xFF)               /*!<DAC channel2 8-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12RD register  ******************/
+#define  DAC_DHR12RD_DACC1DHR                ((uint32_t)0x00000FFF)        /*!<DAC channel1 12-bit Right aligned data */
+#define  DAC_DHR12RD_DACC2DHR                ((uint32_t)0x0FFF0000)        /*!<DAC channel2 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12LD register  ******************/
+#define  DAC_DHR12LD_DACC1DHR                ((uint32_t)0x0000FFF0)        /*!<DAC channel1 12-bit Left aligned data */
+#define  DAC_DHR12LD_DACC2DHR                ((uint32_t)0xFFF00000)        /*!<DAC channel2 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8RD register  ******************/
+#define  DAC_DHR8RD_DACC1DHR                 ((uint32_t)0x00FF)            /*!<DAC channel1 8-bit Right aligned data */
+#define  DAC_DHR8RD_DACC2DHR                 ((uint32_t)0xFF00)            /*!<DAC channel2 8-bit Right aligned data */
+
+/*******************  Bit definition for DAC_DOR1 register  *******************/
+#define  DAC_DOR1_DACC1DOR                   ((uint32_t)0x0FFF)            /*!<DAC channel1 data output */
+
+/*******************  Bit definition for DAC_DOR2 register  *******************/
+#define  DAC_DOR2_DACC2DOR                   ((uint32_t)0x0FFF)            /*!<DAC channel2 data output */
+
+/********************  Bit definition for DAC_SR register  ********************/
+#define  DAC_SR_DMAUDR1                      ((uint32_t)0x00002000)        /*!<DAC channel1 DMA underrun flag */
+#define  DAC_SR_DMAUDR2                      ((uint32_t)0x20000000)        /*!<DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                 Debug MCU                                  */
+/*                                                                            */
+/******************************************************************************/
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    DCMI                                    */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bits definition for DCMI_CR register  ******************/
+#define DCMI_CR_CAPTURE                      ((uint32_t)0x00000001)
+#define DCMI_CR_CM                           ((uint32_t)0x00000002)
+#define DCMI_CR_CROP                         ((uint32_t)0x00000004)
+#define DCMI_CR_JPEG                         ((uint32_t)0x00000008)
+#define DCMI_CR_ESS                          ((uint32_t)0x00000010)
+#define DCMI_CR_PCKPOL                       ((uint32_t)0x00000020)
+#define DCMI_CR_HSPOL                        ((uint32_t)0x00000040)
+#define DCMI_CR_VSPOL                        ((uint32_t)0x00000080)
+#define DCMI_CR_FCRC_0                       ((uint32_t)0x00000100)
+#define DCMI_CR_FCRC_1                       ((uint32_t)0x00000200)
+#define DCMI_CR_EDM_0                        ((uint32_t)0x00000400)
+#define DCMI_CR_EDM_1                        ((uint32_t)0x00000800)
+#define DCMI_CR_CRE                          ((uint32_t)0x00001000)
+#define DCMI_CR_ENABLE                       ((uint32_t)0x00004000)
+
+/********************  Bits definition for DCMI_SR register  ******************/
+#define DCMI_SR_HSYNC                        ((uint32_t)0x00000001)
+#define DCMI_SR_VSYNC                        ((uint32_t)0x00000002)
+#define DCMI_SR_FNE                          ((uint32_t)0x00000004)
+
+/********************  Bits definition for DCMI_RISR register  ****************/
+#define DCMI_RISR_FRAME_RIS                  ((uint32_t)0x00000001)
+#define DCMI_RISR_OVF_RIS                    ((uint32_t)0x00000002)
+#define DCMI_RISR_ERR_RIS                    ((uint32_t)0x00000004)
+#define DCMI_RISR_VSYNC_RIS                  ((uint32_t)0x00000008)
+#define DCMI_RISR_LINE_RIS                   ((uint32_t)0x00000010)
+
+/********************  Bits definition for DCMI_IER register  *****************/
+#define DCMI_IER_FRAME_IE                    ((uint32_t)0x00000001)
+#define DCMI_IER_OVF_IE                      ((uint32_t)0x00000002)
+#define DCMI_IER_ERR_IE                      ((uint32_t)0x00000004)
+#define DCMI_IER_VSYNC_IE                    ((uint32_t)0x00000008)
+#define DCMI_IER_LINE_IE                     ((uint32_t)0x00000010)
+
+/********************  Bits definition for DCMI_MISR register  ****************/
+#define DCMI_MISR_FRAME_MIS                  ((uint32_t)0x00000001)
+#define DCMI_MISR_OVF_MIS                    ((uint32_t)0x00000002)
+#define DCMI_MISR_ERR_MIS                    ((uint32_t)0x00000004)
+#define DCMI_MISR_VSYNC_MIS                  ((uint32_t)0x00000008)
+#define DCMI_MISR_LINE_MIS                   ((uint32_t)0x00000010)
+
+/********************  Bits definition for DCMI_ICR register  *****************/
+#define DCMI_ICR_FRAME_ISC                   ((uint32_t)0x00000001)
+#define DCMI_ICR_OVF_ISC                     ((uint32_t)0x00000002)
+#define DCMI_ICR_ERR_ISC                     ((uint32_t)0x00000004)
+#define DCMI_ICR_VSYNC_ISC                   ((uint32_t)0x00000008)
+#define DCMI_ICR_LINE_ISC                    ((uint32_t)0x00000010)
+
+/******************************************************************************/
+/*                                                                            */
+/*                             DMA Controller                                 */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bits definition for DMA_SxCR register  *****************/
+#define DMA_SxCR_CHSEL                       ((uint32_t)0x0E000000)
+#define DMA_SxCR_CHSEL_0                     ((uint32_t)0x02000000)
+#define DMA_SxCR_CHSEL_1                     ((uint32_t)0x04000000)
+#define DMA_SxCR_CHSEL_2                     ((uint32_t)0x08000000)
+#define DMA_SxCR_MBURST                      ((uint32_t)0x01800000)
+#define DMA_SxCR_MBURST_0                    ((uint32_t)0x00800000)
+#define DMA_SxCR_MBURST_1                    ((uint32_t)0x01000000)
+#define DMA_SxCR_PBURST                      ((uint32_t)0x00600000)
+#define DMA_SxCR_PBURST_0                    ((uint32_t)0x00200000)
+#define DMA_SxCR_PBURST_1                    ((uint32_t)0x00400000)
+#define DMA_SxCR_ACK                         ((uint32_t)0x00100000)
+#define DMA_SxCR_CT                          ((uint32_t)0x00080000)
+#define DMA_SxCR_DBM                         ((uint32_t)0x00040000)
+#define DMA_SxCR_PL                          ((uint32_t)0x00030000)
+#define DMA_SxCR_PL_0                        ((uint32_t)0x00010000)
+#define DMA_SxCR_PL_1                        ((uint32_t)0x00020000)
+#define DMA_SxCR_PINCOS                      ((uint32_t)0x00008000)
+#define DMA_SxCR_MSIZE                       ((uint32_t)0x00006000)
+#define DMA_SxCR_MSIZE_0                     ((uint32_t)0x00002000)
+#define DMA_SxCR_MSIZE_1                     ((uint32_t)0x00004000)
+#define DMA_SxCR_PSIZE                       ((uint32_t)0x00001800)
+#define DMA_SxCR_PSIZE_0                     ((uint32_t)0x00000800)
+#define DMA_SxCR_PSIZE_1                     ((uint32_t)0x00001000)
+#define DMA_SxCR_MINC                        ((uint32_t)0x00000400)
+#define DMA_SxCR_PINC                        ((uint32_t)0x00000200)
+#define DMA_SxCR_CIRC                        ((uint32_t)0x00000100)
+#define DMA_SxCR_DIR                         ((uint32_t)0x000000C0)
+#define DMA_SxCR_DIR_0                       ((uint32_t)0x00000040)
+#define DMA_SxCR_DIR_1                       ((uint32_t)0x00000080)
+#define DMA_SxCR_PFCTRL                      ((uint32_t)0x00000020)
+#define DMA_SxCR_TCIE                        ((uint32_t)0x00000010)
+#define DMA_SxCR_HTIE                        ((uint32_t)0x00000008)
+#define DMA_SxCR_TEIE                        ((uint32_t)0x00000004)
+#define DMA_SxCR_DMEIE                       ((uint32_t)0x00000002)
+#define DMA_SxCR_EN                          ((uint32_t)0x00000001)
+
+/********************  Bits definition for DMA_SxCNDTR register  **************/
+#define DMA_SxNDT                            ((uint32_t)0x0000FFFF)
+#define DMA_SxNDT_0                          ((uint32_t)0x00000001)
+#define DMA_SxNDT_1                          ((uint32_t)0x00000002)
+#define DMA_SxNDT_2                          ((uint32_t)0x00000004)
+#define DMA_SxNDT_3                          ((uint32_t)0x00000008)
+#define DMA_SxNDT_4                          ((uint32_t)0x00000010)
+#define DMA_SxNDT_5                          ((uint32_t)0x00000020)
+#define DMA_SxNDT_6                          ((uint32_t)0x00000040)
+#define DMA_SxNDT_7                          ((uint32_t)0x00000080)
+#define DMA_SxNDT_8                          ((uint32_t)0x00000100)
+#define DMA_SxNDT_9                          ((uint32_t)0x00000200)
+#define DMA_SxNDT_10                         ((uint32_t)0x00000400)
+#define DMA_SxNDT_11                         ((uint32_t)0x00000800)
+#define DMA_SxNDT_12                         ((uint32_t)0x00001000)
+#define DMA_SxNDT_13                         ((uint32_t)0x00002000)
+#define DMA_SxNDT_14                         ((uint32_t)0x00004000)
+#define DMA_SxNDT_15                         ((uint32_t)0x00008000)
+
+/********************  Bits definition for DMA_SxFCR register  ****************/
+#define DMA_SxFCR_FEIE                       ((uint32_t)0x00000080)
+#define DMA_SxFCR_FS                         ((uint32_t)0x00000038)
+#define DMA_SxFCR_FS_0                       ((uint32_t)0x00000008)
+#define DMA_SxFCR_FS_1                       ((uint32_t)0x00000010)
+#define DMA_SxFCR_FS_2                       ((uint32_t)0x00000020)
+#define DMA_SxFCR_DMDIS                      ((uint32_t)0x00000004)
+#define DMA_SxFCR_FTH                        ((uint32_t)0x00000003)
+#define DMA_SxFCR_FTH_0                      ((uint32_t)0x00000001)
+#define DMA_SxFCR_FTH_1                      ((uint32_t)0x00000002)
+
+/********************  Bits definition for DMA_LISR register  *****************/
+#define DMA_LISR_TCIF3                       ((uint32_t)0x08000000)
+#define DMA_LISR_HTIF3                       ((uint32_t)0x04000000)
+#define DMA_LISR_TEIF3                       ((uint32_t)0x02000000)
+#define DMA_LISR_DMEIF3                      ((uint32_t)0x01000000)
+#define DMA_LISR_FEIF3                       ((uint32_t)0x00400000)
+#define DMA_LISR_TCIF2                       ((uint32_t)0x00200000)
+#define DMA_LISR_HTIF2                       ((uint32_t)0x00100000)
+#define DMA_LISR_TEIF2                       ((uint32_t)0x00080000)
+#define DMA_LISR_DMEIF2                      ((uint32_t)0x00040000)
+#define DMA_LISR_FEIF2                       ((uint32_t)0x00010000)
+#define DMA_LISR_TCIF1                       ((uint32_t)0x00000800)
+#define DMA_LISR_HTIF1                       ((uint32_t)0x00000400)
+#define DMA_LISR_TEIF1                       ((uint32_t)0x00000200)
+#define DMA_LISR_DMEIF1                      ((uint32_t)0x00000100)
+#define DMA_LISR_FEIF1                       ((uint32_t)0x00000040)
+#define DMA_LISR_TCIF0                       ((uint32_t)0x00000020)
+#define DMA_LISR_HTIF0                       ((uint32_t)0x00000010)
+#define DMA_LISR_TEIF0                       ((uint32_t)0x00000008)
+#define DMA_LISR_DMEIF0                      ((uint32_t)0x00000004)
+#define DMA_LISR_FEIF0                       ((uint32_t)0x00000001)
+
+/********************  Bits definition for DMA_HISR register  *****************/
+#define DMA_HISR_TCIF7                       ((uint32_t)0x08000000)
+#define DMA_HISR_HTIF7                       ((uint32_t)0x04000000)
+#define DMA_HISR_TEIF7                       ((uint32_t)0x02000000)
+#define DMA_HISR_DMEIF7                      ((uint32_t)0x01000000)
+#define DMA_HISR_FEIF7                       ((uint32_t)0x00400000)
+#define DMA_HISR_TCIF6                       ((uint32_t)0x00200000)
+#define DMA_HISR_HTIF6                       ((uint32_t)0x00100000)
+#define DMA_HISR_TEIF6                       ((uint32_t)0x00080000)
+#define DMA_HISR_DMEIF6                      ((uint32_t)0x00040000)
+#define DMA_HISR_FEIF6                       ((uint32_t)0x00010000)
+#define DMA_HISR_TCIF5                       ((uint32_t)0x00000800)
+#define DMA_HISR_HTIF5                       ((uint32_t)0x00000400)
+#define DMA_HISR_TEIF5                       ((uint32_t)0x00000200)
+#define DMA_HISR_DMEIF5                      ((uint32_t)0x00000100)
+#define DMA_HISR_FEIF5                       ((uint32_t)0x00000040)
+#define DMA_HISR_TCIF4                       ((uint32_t)0x00000020)
+#define DMA_HISR_HTIF4                       ((uint32_t)0x00000010)
+#define DMA_HISR_TEIF4                       ((uint32_t)0x00000008)
+#define DMA_HISR_DMEIF4                      ((uint32_t)0x00000004)
+#define DMA_HISR_FEIF4                       ((uint32_t)0x00000001)
+
+/********************  Bits definition for DMA_LIFCR register  ****************/
+#define DMA_LIFCR_CTCIF3                     ((uint32_t)0x08000000)
+#define DMA_LIFCR_CHTIF3                     ((uint32_t)0x04000000)
+#define DMA_LIFCR_CTEIF3                     ((uint32_t)0x02000000)
+#define DMA_LIFCR_CDMEIF3                    ((uint32_t)0x01000000)
+#define DMA_LIFCR_CFEIF3                     ((uint32_t)0x00400000)
+#define DMA_LIFCR_CTCIF2                     ((uint32_t)0x00200000)
+#define DMA_LIFCR_CHTIF2                     ((uint32_t)0x00100000)
+#define DMA_LIFCR_CTEIF2                     ((uint32_t)0x00080000)
+#define DMA_LIFCR_CDMEIF2                    ((uint32_t)0x00040000)
+#define DMA_LIFCR_CFEIF2                     ((uint32_t)0x00010000)
+#define DMA_LIFCR_CTCIF1                     ((uint32_t)0x00000800)
+#define DMA_LIFCR_CHTIF1                     ((uint32_t)0x00000400)
+#define DMA_LIFCR_CTEIF1                     ((uint32_t)0x00000200)
+#define DMA_LIFCR_CDMEIF1                    ((uint32_t)0x00000100)
+#define DMA_LIFCR_CFEIF1                     ((uint32_t)0x00000040)
+#define DMA_LIFCR_CTCIF0                     ((uint32_t)0x00000020)
+#define DMA_LIFCR_CHTIF0                     ((uint32_t)0x00000010)
+#define DMA_LIFCR_CTEIF0                     ((uint32_t)0x00000008)
+#define DMA_LIFCR_CDMEIF0                    ((uint32_t)0x00000004)
+#define DMA_LIFCR_CFEIF0                     ((uint32_t)0x00000001)
+
+/********************  Bits definition for DMA_HIFCR  register  ****************/
+#define DMA_HIFCR_CTCIF7                     ((uint32_t)0x08000000)
+#define DMA_HIFCR_CHTIF7                     ((uint32_t)0x04000000)
+#define DMA_HIFCR_CTEIF7                     ((uint32_t)0x02000000)
+#define DMA_HIFCR_CDMEIF7                    ((uint32_t)0x01000000)
+#define DMA_HIFCR_CFEIF7                     ((uint32_t)0x00400000)
+#define DMA_HIFCR_CTCIF6                     ((uint32_t)0x00200000)
+#define DMA_HIFCR_CHTIF6                     ((uint32_t)0x00100000)
+#define DMA_HIFCR_CTEIF6                     ((uint32_t)0x00080000)
+#define DMA_HIFCR_CDMEIF6                    ((uint32_t)0x00040000)
+#define DMA_HIFCR_CFEIF6                     ((uint32_t)0x00010000)
+#define DMA_HIFCR_CTCIF5                     ((uint32_t)0x00000800)
+#define DMA_HIFCR_CHTIF5                     ((uint32_t)0x00000400)
+#define DMA_HIFCR_CTEIF5                     ((uint32_t)0x00000200)
+#define DMA_HIFCR_CDMEIF5                    ((uint32_t)0x00000100)
+#define DMA_HIFCR_CFEIF5                     ((uint32_t)0x00000040)
+#define DMA_HIFCR_CTCIF4                     ((uint32_t)0x00000020)
+#define DMA_HIFCR_CHTIF4                     ((uint32_t)0x00000010)
+#define DMA_HIFCR_CTEIF4                     ((uint32_t)0x00000008)
+#define DMA_HIFCR_CDMEIF4                    ((uint32_t)0x00000004)
+#define DMA_HIFCR_CFEIF4                     ((uint32_t)0x00000001)
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                         AHB Master DMA2D Controller (DMA2D)                */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for DMA2D_CR register  ******************/
+
+#define DMA2D_CR_START                     ((uint32_t)0x00000001)               /*!< Start transfer */
+#define DMA2D_CR_SUSP                      ((uint32_t)0x00000002)               /*!< Suspend transfer */
+#define DMA2D_CR_ABORT                     ((uint32_t)0x00000004)               /*!< Abort transfer */
+#define DMA2D_CR_TEIE                      ((uint32_t)0x00000100)               /*!< Transfer Error Interrupt Enable */
+#define DMA2D_CR_TCIE                      ((uint32_t)0x00000200)               /*!< Transfer Complete Interrupt Enable */
+#define DMA2D_CR_TWIE                      ((uint32_t)0x00000400)               /*!< Transfer Watermark Interrupt Enable */
+#define DMA2D_CR_CAEIE                     ((uint32_t)0x00000800)               /*!< CLUT Access Error Interrupt Enable */
+#define DMA2D_CR_CTCIE                     ((uint32_t)0x00001000)               /*!< CLUT Transfer Complete Interrupt Enable */
+#define DMA2D_CR_CEIE                      ((uint32_t)0x00002000)               /*!< Configuration Error Interrupt Enable */
+#define DMA2D_CR_MODE                      ((uint32_t)0x00030000)               /*!< DMA2D Mode */
+
+/********************  Bit definition for DMA2D_ISR register  *****************/
+
+#define DMA2D_ISR_TEIF                     ((uint32_t)0x00000001)               /*!< Transfer Error Interrupt Flag */
+#define DMA2D_ISR_TCIF                     ((uint32_t)0x00000002)               /*!< Transfer Complete Interrupt Flag */
+#define DMA2D_ISR_TWIF                     ((uint32_t)0x00000004)               /*!< Transfer Watermark Interrupt Flag */
+#define DMA2D_ISR_CAEIF                    ((uint32_t)0x00000008)               /*!< CLUT Access Error Interrupt Flag */
+#define DMA2D_ISR_CTCIF                    ((uint32_t)0x00000010)               /*!< CLUT Transfer Complete Interrupt Flag */
+#define DMA2D_ISR_CEIF                     ((uint32_t)0x00000020)               /*!< Configuration Error Interrupt Flag */
+
+/********************  Bit definition for DMA2D_IFSR register  ****************/
+
+#define DMA2D_IFSR_CTEIF                   ((uint32_t)0x00000001)               /*!< Clears Transfer Error Interrupt Flag */
+#define DMA2D_IFSR_CTCIF                   ((uint32_t)0x00000002)               /*!< Clears Transfer Complete Interrupt Flag */
+#define DMA2D_IFSR_CTWIF                   ((uint32_t)0x00000004)               /*!< Clears Transfer Watermark Interrupt Flag */
+#define DMA2D_IFSR_CCAEIF                  ((uint32_t)0x00000008)               /*!< Clears CLUT Access Error Interrupt Flag */
+#define DMA2D_IFSR_CCTCIF                  ((uint32_t)0x00000010)               /*!< Clears CLUT Transfer Complete Interrupt Flag */
+#define DMA2D_IFSR_CCEIF                   ((uint32_t)0x00000020)               /*!< Clears Configuration Error Interrupt Flag */
+
+/********************  Bit definition for DMA2D_FGMAR register  ***************/
+
+#define DMA2D_FGMAR_MA                     ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_FGOR register  ****************/
+
+#define DMA2D_FGOR_LO                      ((uint32_t)0x00003FFF)               /*!< Line Offset */
+
+/********************  Bit definition for DMA2D_BGMAR register  ***************/
+
+#define DMA2D_BGMAR_MA                     ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_BGOR register  ****************/
+
+#define DMA2D_BGOR_LO                      ((uint32_t)0x00003FFF)               /*!< Line Offset */
+
+/********************  Bit definition for DMA2D_FGPFCCR register  *************/
+
+#define DMA2D_FGPFCCR_CM                   ((uint32_t)0x0000000F)               /*!< Color mode */
+#define DMA2D_FGPFCCR_CCM                  ((uint32_t)0x00000010)               /*!< CLUT Color mode */
+#define DMA2D_FGPFCCR_START                ((uint32_t)0x00000020)               /*!< Start */
+#define DMA2D_FGPFCCR_CS                   ((uint32_t)0x0000FF00)               /*!< CLUT size */
+#define DMA2D_FGPFCCR_AM                   ((uint32_t)0x00030000)               /*!< Alpha mode */
+#define DMA2D_FGPFCCR_ALPHA                ((uint32_t)0xFF000000)               /*!< Alpha value */
+
+/********************  Bit definition for DMA2D_FGCOLR register  **************/
+
+#define DMA2D_FGCOLR_BLUE                  ((uint32_t)0x000000FF)               /*!< Blue Value */
+#define DMA2D_FGCOLR_GREEN                 ((uint32_t)0x0000FF00)               /*!< Green Value */
+#define DMA2D_FGCOLR_RED                   ((uint32_t)0x00FF0000)               /*!< Red Value */
+
+/********************  Bit definition for DMA2D_BGPFCCR register  *************/
+
+#define DMA2D_BGPFCCR_CM                   ((uint32_t)0x0000000F)               /*!< Color mode */
+#define DMA2D_BGPFCCR_CCM                  ((uint32_t)0x00000010)               /*!< CLUT Color mode */
+#define DMA2D_BGPFCCR_START                ((uint32_t)0x00000020)               /*!< Start */
+#define DMA2D_BGPFCCR_CS                   ((uint32_t)0x0000FF00)               /*!< CLUT size */
+#define DMA2D_BGPFCCR_AM                   ((uint32_t)0x00030000)               /*!< Alpha Mode */
+#define DMA2D_BGPFCCR_ALPHA                ((uint32_t)0xFF000000)               /*!< Alpha value */
+
+/********************  Bit definition for DMA2D_BGCOLR register  **************/
+
+#define DMA2D_BGCOLR_BLUE                  ((uint32_t)0x000000FF)               /*!< Blue Value */
+#define DMA2D_BGCOLR_GREEN                 ((uint32_t)0x0000FF00)               /*!< Green Value */
+#define DMA2D_BGCOLR_RED                   ((uint32_t)0x00FF0000)               /*!< Red Value */
+
+/********************  Bit definition for DMA2D_FGCMAR register  **************/
+
+#define DMA2D_FGCMAR_MA                    ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_BGCMAR register  **************/
+
+#define DMA2D_BGCMAR_MA                    ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_OPFCCR register  **************/
+
+#define DMA2D_OPFCCR_CM                    ((uint32_t)0x00000007)               /*!< Color mode */
+
+/********************  Bit definition for DMA2D_OCOLR register  ***************/
+
+/*!<Mode_ARGB8888/RGB888 */
+
+#define DMA2D_OCOLR_BLUE_1                 ((uint32_t)0x000000FF)               /*!< BLUE Value */
+#define DMA2D_OCOLR_GREEN_1                ((uint32_t)0x0000FF00)               /*!< GREEN Value  */
+#define DMA2D_OCOLR_RED_1                  ((uint32_t)0x00FF0000)               /*!< Red Value */
+#define DMA2D_OCOLR_ALPHA_1                ((uint32_t)0xFF000000)               /*!< Alpha Channel Value */
+
+/*!<Mode_RGB565 */
+#define DMA2D_OCOLR_BLUE_2                 ((uint32_t)0x0000001F)               /*!< BLUE Value */
+#define DMA2D_OCOLR_GREEN_2                ((uint32_t)0x000007E0)               /*!< GREEN Value  */
+#define DMA2D_OCOLR_RED_2                  ((uint32_t)0x0000F800)               /*!< Red Value */
+
+/*!<Mode_ARGB1555 */
+#define DMA2D_OCOLR_BLUE_3                 ((uint32_t)0x0000001F)               /*!< BLUE Value */
+#define DMA2D_OCOLR_GREEN_3                ((uint32_t)0x000003E0)               /*!< GREEN Value  */
+#define DMA2D_OCOLR_RED_3                  ((uint32_t)0x00007C00)               /*!< Red Value */
+#define DMA2D_OCOLR_ALPHA_3                ((uint32_t)0x00008000)               /*!< Alpha Channel Value */
+
+/*!<Mode_ARGB4444 */
+#define DMA2D_OCOLR_BLUE_4                 ((uint32_t)0x0000000F)               /*!< BLUE Value */
+#define DMA2D_OCOLR_GREEN_4                ((uint32_t)0x000000F0)               /*!< GREEN Value  */
+#define DMA2D_OCOLR_RED_4                  ((uint32_t)0x00000F00)               /*!< Red Value */
+#define DMA2D_OCOLR_ALPHA_4                ((uint32_t)0x0000F000)               /*!< Alpha Channel Value */
+
+/********************  Bit definition for DMA2D_OMAR register  ****************/
+
+#define DMA2D_OMAR_MA                      ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_OOR register  *****************/
+
+#define DMA2D_OOR_LO                       ((uint32_t)0x00003FFF)               /*!< Line Offset */
+
+/********************  Bit definition for DMA2D_NLR register  *****************/
+
+#define DMA2D_NLR_NL                       ((uint32_t)0x0000FFFF)               /*!< Number of Lines */
+#define DMA2D_NLR_PL                       ((uint32_t)0x3FFF0000)               /*!< Pixel per Lines */
+
+/********************  Bit definition for DMA2D_LWR register  *****************/
+
+#define DMA2D_LWR_LW                       ((uint32_t)0x0000FFFF)               /*!< Line Watermark */
+
+/********************  Bit definition for DMA2D_AMTCR register  ***************/
+
+#define DMA2D_AMTCR_EN                     ((uint32_t)0x00000001)               /*!< Enable */
+#define DMA2D_AMTCR_DT                     ((uint32_t)0x0000FF00)               /*!< Dead Time */
+
+
+/********************  Bit definition for DMA2D_FGCLUT register  **************/
+
+/********************  Bit definition for DMA2D_BGCLUT register  **************/
+
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                    External Interrupt/Event Controller                     */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for EXTI_IMR register  *******************/
+#define  EXTI_IMR_MR0                        ((uint32_t)0x00000001)        /*!< Interrupt Mask on line 0 */
+#define  EXTI_IMR_MR1                        ((uint32_t)0x00000002)        /*!< Interrupt Mask on line 1 */
+#define  EXTI_IMR_MR2                        ((uint32_t)0x00000004)        /*!< Interrupt Mask on line 2 */
+#define  EXTI_IMR_MR3                        ((uint32_t)0x00000008)        /*!< Interrupt Mask on line 3 */
+#define  EXTI_IMR_MR4                        ((uint32_t)0x00000010)        /*!< Interrupt Mask on line 4 */
+#define  EXTI_IMR_MR5                        ((uint32_t)0x00000020)        /*!< Interrupt Mask on line 5 */
+#define  EXTI_IMR_MR6                        ((uint32_t)0x00000040)        /*!< Interrupt Mask on line 6 */
+#define  EXTI_IMR_MR7                        ((uint32_t)0x00000080)        /*!< Interrupt Mask on line 7 */
+#define  EXTI_IMR_MR8                        ((uint32_t)0x00000100)        /*!< Interrupt Mask on line 8 */
+#define  EXTI_IMR_MR9                        ((uint32_t)0x00000200)        /*!< Interrupt Mask on line 9 */
+#define  EXTI_IMR_MR10                       ((uint32_t)0x00000400)        /*!< Interrupt Mask on line 10 */
+#define  EXTI_IMR_MR11                       ((uint32_t)0x00000800)        /*!< Interrupt Mask on line 11 */
+#define  EXTI_IMR_MR12                       ((uint32_t)0x00001000)        /*!< Interrupt Mask on line 12 */
+#define  EXTI_IMR_MR13                       ((uint32_t)0x00002000)        /*!< Interrupt Mask on line 13 */
+#define  EXTI_IMR_MR14                       ((uint32_t)0x00004000)        /*!< Interrupt Mask on line 14 */
+#define  EXTI_IMR_MR15                       ((uint32_t)0x00008000)        /*!< Interrupt Mask on line 15 */
+#define  EXTI_IMR_MR16                       ((uint32_t)0x00010000)        /*!< Interrupt Mask on line 16 */
+#define  EXTI_IMR_MR17                       ((uint32_t)0x00020000)        /*!< Interrupt Mask on line 17 */
+#define  EXTI_IMR_MR18                       ((uint32_t)0x00040000)        /*!< Interrupt Mask on line 18 */
+#define  EXTI_IMR_MR19                       ((uint32_t)0x00080000)        /*!< Interrupt Mask on line 19 */
+#define  EXTI_IMR_MR20                       ((uint32_t)0x00100000)        /*!< Interrupt Mask on line 20 */
+#define  EXTI_IMR_MR21                       ((uint32_t)0x00200000)        /*!< Interrupt Mask on line 21 */
+#define  EXTI_IMR_MR22                       ((uint32_t)0x00400000)        /*!< Interrupt Mask on line 22 */
+
+/*******************  Bit definition for EXTI_EMR register  *******************/
+#define  EXTI_EMR_MR0                        ((uint32_t)0x00000001)        /*!< Event Mask on line 0 */
+#define  EXTI_EMR_MR1                        ((uint32_t)0x00000002)        /*!< Event Mask on line 1 */
+#define  EXTI_EMR_MR2                        ((uint32_t)0x00000004)        /*!< Event Mask on line 2 */
+#define  EXTI_EMR_MR3                        ((uint32_t)0x00000008)        /*!< Event Mask on line 3 */
+#define  EXTI_EMR_MR4                        ((uint32_t)0x00000010)        /*!< Event Mask on line 4 */
+#define  EXTI_EMR_MR5                        ((uint32_t)0x00000020)        /*!< Event Mask on line 5 */
+#define  EXTI_EMR_MR6                        ((uint32_t)0x00000040)        /*!< Event Mask on line 6 */
+#define  EXTI_EMR_MR7                        ((uint32_t)0x00000080)        /*!< Event Mask on line 7 */
+#define  EXTI_EMR_MR8                        ((uint32_t)0x00000100)        /*!< Event Mask on line 8 */
+#define  EXTI_EMR_MR9                        ((uint32_t)0x00000200)        /*!< Event Mask on line 9 */
+#define  EXTI_EMR_MR10                       ((uint32_t)0x00000400)        /*!< Event Mask on line 10 */
+#define  EXTI_EMR_MR11                       ((uint32_t)0x00000800)        /*!< Event Mask on line 11 */
+#define  EXTI_EMR_MR12                       ((uint32_t)0x00001000)        /*!< Event Mask on line 12 */
+#define  EXTI_EMR_MR13                       ((uint32_t)0x00002000)        /*!< Event Mask on line 13 */
+#define  EXTI_EMR_MR14                       ((uint32_t)0x00004000)        /*!< Event Mask on line 14 */
+#define  EXTI_EMR_MR15                       ((uint32_t)0x00008000)        /*!< Event Mask on line 15 */
+#define  EXTI_EMR_MR16                       ((uint32_t)0x00010000)        /*!< Event Mask on line 16 */
+#define  EXTI_EMR_MR17                       ((uint32_t)0x00020000)        /*!< Event Mask on line 17 */
+#define  EXTI_EMR_MR18                       ((uint32_t)0x00040000)        /*!< Event Mask on line 18 */
+#define  EXTI_EMR_MR19                       ((uint32_t)0x00080000)        /*!< Event Mask on line 19 */
+#define  EXTI_EMR_MR20                       ((uint32_t)0x00100000)        /*!< Event Mask on line 20 */
+#define  EXTI_EMR_MR21                       ((uint32_t)0x00200000)        /*!< Event Mask on line 21 */
+#define  EXTI_EMR_MR22                       ((uint32_t)0x00400000)        /*!< Event Mask on line 22 */
+
+/******************  Bit definition for EXTI_RTSR register  *******************/
+#define  EXTI_RTSR_TR0                       ((uint32_t)0x00000001)        /*!< Rising trigger event configuration bit of line 0 */
+#define  EXTI_RTSR_TR1                       ((uint32_t)0x00000002)        /*!< Rising trigger event configuration bit of line 1 */
+#define  EXTI_RTSR_TR2                       ((uint32_t)0x00000004)        /*!< Rising trigger event configuration bit of line 2 */
+#define  EXTI_RTSR_TR3                       ((uint32_t)0x00000008)        /*!< Rising trigger event configuration bit of line 3 */
+#define  EXTI_RTSR_TR4                       ((uint32_t)0x00000010)        /*!< Rising trigger event configuration bit of line 4 */
+#define  EXTI_RTSR_TR5                       ((uint32_t)0x00000020)        /*!< Rising trigger event configuration bit of line 5 */
+#define  EXTI_RTSR_TR6                       ((uint32_t)0x00000040)        /*!< Rising trigger event configuration bit of line 6 */
+#define  EXTI_RTSR_TR7                       ((uint32_t)0x00000080)        /*!< Rising trigger event configuration bit of line 7 */
+#define  EXTI_RTSR_TR8                       ((uint32_t)0x00000100)        /*!< Rising trigger event configuration bit of line 8 */
+#define  EXTI_RTSR_TR9                       ((uint32_t)0x00000200)        /*!< Rising trigger event configuration bit of line 9 */
+#define  EXTI_RTSR_TR10                      ((uint32_t)0x00000400)        /*!< Rising trigger event configuration bit of line 10 */
+#define  EXTI_RTSR_TR11                      ((uint32_t)0x00000800)        /*!< Rising trigger event configuration bit of line 11 */
+#define  EXTI_RTSR_TR12                      ((uint32_t)0x00001000)        /*!< Rising trigger event configuration bit of line 12 */
+#define  EXTI_RTSR_TR13                      ((uint32_t)0x00002000)        /*!< Rising trigger event configuration bit of line 13 */
+#define  EXTI_RTSR_TR14                      ((uint32_t)0x00004000)        /*!< Rising trigger event configuration bit of line 14 */
+#define  EXTI_RTSR_TR15                      ((uint32_t)0x00008000)        /*!< Rising trigger event configuration bit of line 15 */
+#define  EXTI_RTSR_TR16                      ((uint32_t)0x00010000)        /*!< Rising trigger event configuration bit of line 16 */
+#define  EXTI_RTSR_TR17                      ((uint32_t)0x00020000)        /*!< Rising trigger event configuration bit of line 17 */
+#define  EXTI_RTSR_TR18                      ((uint32_t)0x00040000)        /*!< Rising trigger event configuration bit of line 18 */
+#define  EXTI_RTSR_TR19                      ((uint32_t)0x00080000)        /*!< Rising trigger event configuration bit of line 19 */
+#define  EXTI_RTSR_TR20                      ((uint32_t)0x00100000)        /*!< Rising trigger event configuration bit of line 20 */
+#define  EXTI_RTSR_TR21                      ((uint32_t)0x00200000)        /*!< Rising trigger event configuration bit of line 21 */
+#define  EXTI_RTSR_TR22                      ((uint32_t)0x00400000)        /*!< Rising trigger event configuration bit of line 22 */
+
+/******************  Bit definition for EXTI_FTSR register  *******************/
+#define  EXTI_FTSR_TR0                       ((uint32_t)0x00000001)        /*!< Falling trigger event configuration bit of line 0 */
+#define  EXTI_FTSR_TR1                       ((uint32_t)0x00000002)        /*!< Falling trigger event configuration bit of line 1 */
+#define  EXTI_FTSR_TR2                       ((uint32_t)0x00000004)        /*!< Falling trigger event configuration bit of line 2 */
+#define  EXTI_FTSR_TR3                       ((uint32_t)0x00000008)        /*!< Falling trigger event configuration bit of line 3 */
+#define  EXTI_FTSR_TR4                       ((uint32_t)0x00000010)        /*!< Falling trigger event configuration bit of line 4 */
+#define  EXTI_FTSR_TR5                       ((uint32_t)0x00000020)        /*!< Falling trigger event configuration bit of line 5 */
+#define  EXTI_FTSR_TR6                       ((uint32_t)0x00000040)        /*!< Falling trigger event configuration bit of line 6 */
+#define  EXTI_FTSR_TR7                       ((uint32_t)0x00000080)        /*!< Falling trigger event configuration bit of line 7 */
+#define  EXTI_FTSR_TR8                       ((uint32_t)0x00000100)        /*!< Falling trigger event configuration bit of line 8 */
+#define  EXTI_FTSR_TR9                       ((uint32_t)0x00000200)        /*!< Falling trigger event configuration bit of line 9 */
+#define  EXTI_FTSR_TR10                      ((uint32_t)0x00000400)        /*!< Falling trigger event configuration bit of line 10 */
+#define  EXTI_FTSR_TR11                      ((uint32_t)0x00000800)        /*!< Falling trigger event configuration bit of line 11 */
+#define  EXTI_FTSR_TR12                      ((uint32_t)0x00001000)        /*!< Falling trigger event configuration bit of line 12 */
+#define  EXTI_FTSR_TR13                      ((uint32_t)0x00002000)        /*!< Falling trigger event configuration bit of line 13 */
+#define  EXTI_FTSR_TR14                      ((uint32_t)0x00004000)        /*!< Falling trigger event configuration bit of line 14 */
+#define  EXTI_FTSR_TR15                      ((uint32_t)0x00008000)        /*!< Falling trigger event configuration bit of line 15 */
+#define  EXTI_FTSR_TR16                      ((uint32_t)0x00010000)        /*!< Falling trigger event configuration bit of line 16 */
+#define  EXTI_FTSR_TR17                      ((uint32_t)0x00020000)        /*!< Falling trigger event configuration bit of line 17 */
+#define  EXTI_FTSR_TR18                      ((uint32_t)0x00040000)        /*!< Falling trigger event configuration bit of line 18 */
+#define  EXTI_FTSR_TR19                      ((uint32_t)0x00080000)        /*!< Falling trigger event configuration bit of line 19 */
+#define  EXTI_FTSR_TR20                      ((uint32_t)0x00100000)        /*!< Falling trigger event configuration bit of line 20 */
+#define  EXTI_FTSR_TR21                      ((uint32_t)0x00200000)        /*!< Falling trigger event configuration bit of line 21 */
+#define  EXTI_FTSR_TR22                      ((uint32_t)0x00400000)        /*!< Falling trigger event configuration bit of line 22 */
+
+/******************  Bit definition for EXTI_SWIER register  ******************/
+#define  EXTI_SWIER_SWIER0                   ((uint32_t)0x00000001)        /*!< Software Interrupt on line 0 */
+#define  EXTI_SWIER_SWIER1                   ((uint32_t)0x00000002)        /*!< Software Interrupt on line 1 */
+#define  EXTI_SWIER_SWIER2                   ((uint32_t)0x00000004)        /*!< Software Interrupt on line 2 */
+#define  EXTI_SWIER_SWIER3                   ((uint32_t)0x00000008)        /*!< Software Interrupt on line 3 */
+#define  EXTI_SWIER_SWIER4                   ((uint32_t)0x00000010)        /*!< Software Interrupt on line 4 */
+#define  EXTI_SWIER_SWIER5                   ((uint32_t)0x00000020)        /*!< Software Interrupt on line 5 */
+#define  EXTI_SWIER_SWIER6                   ((uint32_t)0x00000040)        /*!< Software Interrupt on line 6 */
+#define  EXTI_SWIER_SWIER7                   ((uint32_t)0x00000080)        /*!< Software Interrupt on line 7 */
+#define  EXTI_SWIER_SWIER8                   ((uint32_t)0x00000100)        /*!< Software Interrupt on line 8 */
+#define  EXTI_SWIER_SWIER9                   ((uint32_t)0x00000200)        /*!< Software Interrupt on line 9 */
+#define  EXTI_SWIER_SWIER10                  ((uint32_t)0x00000400)        /*!< Software Interrupt on line 10 */
+#define  EXTI_SWIER_SWIER11                  ((uint32_t)0x00000800)        /*!< Software Interrupt on line 11 */
+#define  EXTI_SWIER_SWIER12                  ((uint32_t)0x00001000)        /*!< Software Interrupt on line 12 */
+#define  EXTI_SWIER_SWIER13                  ((uint32_t)0x00002000)        /*!< Software Interrupt on line 13 */
+#define  EXTI_SWIER_SWIER14                  ((uint32_t)0x00004000)        /*!< Software Interrupt on line 14 */
+#define  EXTI_SWIER_SWIER15                  ((uint32_t)0x00008000)        /*!< Software Interrupt on line 15 */
+#define  EXTI_SWIER_SWIER16                  ((uint32_t)0x00010000)        /*!< Software Interrupt on line 16 */
+#define  EXTI_SWIER_SWIER17                  ((uint32_t)0x00020000)        /*!< Software Interrupt on line 17 */
+#define  EXTI_SWIER_SWIER18                  ((uint32_t)0x00040000)        /*!< Software Interrupt on line 18 */
+#define  EXTI_SWIER_SWIER19                  ((uint32_t)0x00080000)        /*!< Software Interrupt on line 19 */
+#define  EXTI_SWIER_SWIER20                  ((uint32_t)0x00100000)        /*!< Software Interrupt on line 20 */
+#define  EXTI_SWIER_SWIER21                  ((uint32_t)0x00200000)        /*!< Software Interrupt on line 21 */
+#define  EXTI_SWIER_SWIER22                  ((uint32_t)0x00400000)        /*!< Software Interrupt on line 22 */
+
+/*******************  Bit definition for EXTI_PR register  ********************/
+#define  EXTI_PR_PR0                         ((uint32_t)0x00000001)        /*!< Pending bit for line 0 */
+#define  EXTI_PR_PR1                         ((uint32_t)0x00000002)        /*!< Pending bit for line 1 */
+#define  EXTI_PR_PR2                         ((uint32_t)0x00000004)        /*!< Pending bit for line 2 */
+#define  EXTI_PR_PR3                         ((uint32_t)0x00000008)        /*!< Pending bit for line 3 */
+#define  EXTI_PR_PR4                         ((uint32_t)0x00000010)        /*!< Pending bit for line 4 */
+#define  EXTI_PR_PR5                         ((uint32_t)0x00000020)        /*!< Pending bit for line 5 */
+#define  EXTI_PR_PR6                         ((uint32_t)0x00000040)        /*!< Pending bit for line 6 */
+#define  EXTI_PR_PR7                         ((uint32_t)0x00000080)        /*!< Pending bit for line 7 */
+#define  EXTI_PR_PR8                         ((uint32_t)0x00000100)        /*!< Pending bit for line 8 */
+#define  EXTI_PR_PR9                         ((uint32_t)0x00000200)        /*!< Pending bit for line 9 */
+#define  EXTI_PR_PR10                        ((uint32_t)0x00000400)        /*!< Pending bit for line 10 */
+#define  EXTI_PR_PR11                        ((uint32_t)0x00000800)        /*!< Pending bit for line 11 */
+#define  EXTI_PR_PR12                        ((uint32_t)0x00001000)        /*!< Pending bit for line 12 */
+#define  EXTI_PR_PR13                        ((uint32_t)0x00002000)        /*!< Pending bit for line 13 */
+#define  EXTI_PR_PR14                        ((uint32_t)0x00004000)        /*!< Pending bit for line 14 */
+#define  EXTI_PR_PR15                        ((uint32_t)0x00008000)        /*!< Pending bit for line 15 */
+#define  EXTI_PR_PR16                        ((uint32_t)0x00010000)        /*!< Pending bit for line 16 */
+#define  EXTI_PR_PR17                        ((uint32_t)0x00020000)        /*!< Pending bit for line 17 */
+#define  EXTI_PR_PR18                        ((uint32_t)0x00040000)        /*!< Pending bit for line 18 */
+#define  EXTI_PR_PR19                        ((uint32_t)0x00080000)        /*!< Pending bit for line 19 */
+#define  EXTI_PR_PR20                        ((uint32_t)0x00100000)        /*!< Pending bit for line 20 */
+#define  EXTI_PR_PR21                        ((uint32_t)0x00200000)        /*!< Pending bit for line 21 */
+#define  EXTI_PR_PR22                        ((uint32_t)0x00400000)        /*!< Pending bit for line 22 */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    FLASH                                   */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bits definition for FLASH_ACR register  *****************/
+#define FLASH_ACR_LATENCY                    ((uint32_t)0x0000000F)
+#define FLASH_ACR_LATENCY_0WS                ((uint32_t)0x00000000)
+#define FLASH_ACR_LATENCY_1WS                ((uint32_t)0x00000001)
+#define FLASH_ACR_LATENCY_2WS                ((uint32_t)0x00000002)
+#define FLASH_ACR_LATENCY_3WS                ((uint32_t)0x00000003)
+#define FLASH_ACR_LATENCY_4WS                ((uint32_t)0x00000004)
+#define FLASH_ACR_LATENCY_5WS                ((uint32_t)0x00000005)
+#define FLASH_ACR_LATENCY_6WS                ((uint32_t)0x00000006)
+#define FLASH_ACR_LATENCY_7WS                ((uint32_t)0x00000007)
+#define FLASH_ACR_LATENCY_8WS                ((uint32_t)0x00000008)
+#define FLASH_ACR_LATENCY_9WS                ((uint32_t)0x00000009)
+#define FLASH_ACR_LATENCY_10WS               ((uint32_t)0x0000000A)
+#define FLASH_ACR_LATENCY_11WS               ((uint32_t)0x0000000B)
+#define FLASH_ACR_LATENCY_12WS               ((uint32_t)0x0000000C)
+#define FLASH_ACR_LATENCY_13WS               ((uint32_t)0x0000000D)
+#define FLASH_ACR_LATENCY_14WS               ((uint32_t)0x0000000E)
+#define FLASH_ACR_LATENCY_15WS               ((uint32_t)0x0000000F)
+#define FLASH_ACR_PRFTEN                     ((uint32_t)0x00000100)
+#define FLASH_ACR_ICEN                       ((uint32_t)0x00000200)
+#define FLASH_ACR_DCEN                       ((uint32_t)0x00000400)
+#define FLASH_ACR_ICRST                      ((uint32_t)0x00000800)
+#define FLASH_ACR_DCRST                      ((uint32_t)0x00001000)
+#define FLASH_ACR_BYTE0_ADDRESS              ((uint32_t)0x40023C00)
+#define FLASH_ACR_BYTE2_ADDRESS              ((uint32_t)0x40023C03)
+
+/*******************  Bits definition for FLASH_SR register  ******************/
+#define FLASH_SR_EOP                         ((uint32_t)0x00000001)
+#define FLASH_SR_SOP                         ((uint32_t)0x00000002)
+#define FLASH_SR_WRPERR                      ((uint32_t)0x00000010)
+#define FLASH_SR_PGAERR                      ((uint32_t)0x00000020)
+#define FLASH_SR_PGPERR                      ((uint32_t)0x00000040)
+#define FLASH_SR_PGSERR                      ((uint32_t)0x00000080)
+#define FLASH_SR_BSY                         ((uint32_t)0x00010000)
+
+/*******************  Bits definition for FLASH_CR register  ******************/
+#define FLASH_CR_PG                          ((uint32_t)0x00000001)
+#define FLASH_CR_SER                         ((uint32_t)0x00000002)
+#define FLASH_CR_MER                         ((uint32_t)0x00000004)
+#define FLASH_CR_MER1                        FLASH_CR_MER
+#define FLASH_CR_SNB                         ((uint32_t)0x000000F8)
+#define FLASH_CR_SNB_0                       ((uint32_t)0x00000008)
+#define FLASH_CR_SNB_1                       ((uint32_t)0x00000010)
+#define FLASH_CR_SNB_2                       ((uint32_t)0x00000020)
+#define FLASH_CR_SNB_3                       ((uint32_t)0x00000040)
+#define FLASH_CR_SNB_4                       ((uint32_t)0x00000080)
+#define FLASH_CR_PSIZE                       ((uint32_t)0x00000300)
+#define FLASH_CR_PSIZE_0                     ((uint32_t)0x00000100)
+#define FLASH_CR_PSIZE_1                     ((uint32_t)0x00000200)
+#define FLASH_CR_MER2                        ((uint32_t)0x00008000)
+#define FLASH_CR_STRT                        ((uint32_t)0x00010000)
+#define FLASH_CR_EOPIE                       ((uint32_t)0x01000000)
+#define FLASH_CR_LOCK                        ((uint32_t)0x80000000)
+
+/*******************  Bits definition for FLASH_OPTCR register  ***************/
+#define FLASH_OPTCR_OPTLOCK                 ((uint32_t)0x00000001)
+#define FLASH_OPTCR_OPTSTRT                 ((uint32_t)0x00000002)
+#define FLASH_OPTCR_BOR_LEV_0               ((uint32_t)0x00000004)
+#define FLASH_OPTCR_BOR_LEV_1               ((uint32_t)0x00000008)
+#define FLASH_OPTCR_BOR_LEV                 ((uint32_t)0x0000000C)
+#define FLASH_OPTCR_BFB2                    ((uint32_t)0x00000010)
+#define FLASH_OPTCR_WDG_SW                  ((uint32_t)0x00000020)
+#define FLASH_OPTCR_nRST_STOP               ((uint32_t)0x00000040)
+#define FLASH_OPTCR_nRST_STDBY              ((uint32_t)0x00000080)
+#define FLASH_OPTCR_RDP                     ((uint32_t)0x0000FF00)
+#define FLASH_OPTCR_RDP_0                   ((uint32_t)0x00000100)
+#define FLASH_OPTCR_RDP_1                   ((uint32_t)0x00000200)
+#define FLASH_OPTCR_RDP_2                   ((uint32_t)0x00000400)
+#define FLASH_OPTCR_RDP_3                   ((uint32_t)0x00000800)
+#define FLASH_OPTCR_RDP_4                   ((uint32_t)0x00001000)
+#define FLASH_OPTCR_RDP_5                   ((uint32_t)0x00002000)
+#define FLASH_OPTCR_RDP_6                   ((uint32_t)0x00004000)
+#define FLASH_OPTCR_RDP_7                   ((uint32_t)0x00008000)
+#define FLASH_OPTCR_nWRP                    ((uint32_t)0x0FFF0000)
+#define FLASH_OPTCR_nWRP_0                  ((uint32_t)0x00010000)
+#define FLASH_OPTCR_nWRP_1                  ((uint32_t)0x00020000)
+#define FLASH_OPTCR_nWRP_2                  ((uint32_t)0x00040000)
+#define FLASH_OPTCR_nWRP_3                  ((uint32_t)0x00080000)
+#define FLASH_OPTCR_nWRP_4                  ((uint32_t)0x00100000)
+#define FLASH_OPTCR_nWRP_5                  ((uint32_t)0x00200000)
+#define FLASH_OPTCR_nWRP_6                  ((uint32_t)0x00400000)
+#define FLASH_OPTCR_nWRP_7                  ((uint32_t)0x00800000)
+#define FLASH_OPTCR_nWRP_8                  ((uint32_t)0x01000000)
+#define FLASH_OPTCR_nWRP_9                  ((uint32_t)0x02000000)
+#define FLASH_OPTCR_nWRP_10                 ((uint32_t)0x04000000)
+#define FLASH_OPTCR_nWRP_11                 ((uint32_t)0x08000000)
+#define FLASH_OPTCR_DB1M                    ((uint32_t)0x40000000)
+#define FLASH_OPTCR_SPRMOD                  ((uint32_t)0x80000000)
+
+/******************  Bits definition for FLASH_OPTCR1 register  ***************/
+#define FLASH_OPTCR1_nWRP                    ((uint32_t)0x0FFF0000)
+#define FLASH_OPTCR1_nWRP_0                  ((uint32_t)0x00010000)
+#define FLASH_OPTCR1_nWRP_1                  ((uint32_t)0x00020000)
+#define FLASH_OPTCR1_nWRP_2                  ((uint32_t)0x00040000)
+#define FLASH_OPTCR1_nWRP_3                  ((uint32_t)0x00080000)
+#define FLASH_OPTCR1_nWRP_4                  ((uint32_t)0x00100000)
+#define FLASH_OPTCR1_nWRP_5                  ((uint32_t)0x00200000)
+#define FLASH_OPTCR1_nWRP_6                  ((uint32_t)0x00400000)
+#define FLASH_OPTCR1_nWRP_7                  ((uint32_t)0x00800000)
+#define FLASH_OPTCR1_nWRP_8                  ((uint32_t)0x01000000)
+#define FLASH_OPTCR1_nWRP_9                  ((uint32_t)0x02000000)
+#define FLASH_OPTCR1_nWRP_10                 ((uint32_t)0x04000000)
+#define FLASH_OPTCR1_nWRP_11                 ((uint32_t)0x08000000)
+
+/******************************************************************************/
+/*                                                                            */
+/*                          Flexible Memory Controller                        */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for FMC_BCR1 register  *******************/
+#define  FMC_BCR1_MBKEN                     ((uint32_t)0x00000001)        /*!<Memory bank enable bit                 */
+#define  FMC_BCR1_MUXEN                     ((uint32_t)0x00000002)        /*!<Address/data multiplexing enable bit   */
+
+#define  FMC_BCR1_MTYP                      ((uint32_t)0x0000000C)        /*!<MTYP[1:0] bits (Memory type)           */
+#define  FMC_BCR1_MTYP_0                    ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_BCR1_MTYP_1                    ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_BCR1_MWID                      ((uint32_t)0x00000030)        /*!<MWID[1:0] bits (Memory data bus width) */
+#define  FMC_BCR1_MWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BCR1_MWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_BCR1_FACCEN                    ((uint32_t)0x00000040)        /*!<Flash access enable        */
+#define  FMC_BCR1_BURSTEN                   ((uint32_t)0x00000100)        /*!<Burst enable bit           */
+#define  FMC_BCR1_WAITPOL                   ((uint32_t)0x00000200)        /*!<Wait signal polarity bit   */
+#define  FMC_BCR1_WRAPMOD                   ((uint32_t)0x00000400)        /*!<Wrapped burst mode support */
+#define  FMC_BCR1_WAITCFG                   ((uint32_t)0x00000800)        /*!<Wait timing configuration  */
+#define  FMC_BCR1_WREN                      ((uint32_t)0x00001000)        /*!<Write enable bit           */
+#define  FMC_BCR1_WAITEN                    ((uint32_t)0x00002000)        /*!<Wait enable bit            */
+#define  FMC_BCR1_EXTMOD                    ((uint32_t)0x00004000)        /*!<Extended mode enable       */
+#define  FMC_BCR1_ASYNCWAIT                 ((uint32_t)0x00008000)        /*!<Asynchronous wait          */
+#define  FMC_BCR1_CBURSTRW                  ((uint32_t)0x00080000)        /*!<Write burst enable         */
+#define  FMC_BCR1_CCLKEN                    ((uint32_t)0x00100000)        /*!<Continous clock enable     */
+
+/******************  Bit definition for FMC_BCR2 register  *******************/
+#define  FMC_BCR2_MBKEN                     ((uint32_t)0x00000001)        /*!<Memory bank enable bit                 */
+#define  FMC_BCR2_MUXEN                     ((uint32_t)0x00000002)        /*!<Address/data multiplexing enable bit   */
+
+#define  FMC_BCR2_MTYP                      ((uint32_t)0x0000000C)        /*!<MTYP[1:0] bits (Memory type)           */
+#define  FMC_BCR2_MTYP_0                    ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_BCR2_MTYP_1                    ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_BCR2_MWID                      ((uint32_t)0x00000030)        /*!<MWID[1:0] bits (Memory data bus width) */
+#define  FMC_BCR2_MWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BCR2_MWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_BCR2_FACCEN                    ((uint32_t)0x00000040)        /*!<Flash access enable        */
+#define  FMC_BCR2_BURSTEN                   ((uint32_t)0x00000100)        /*!<Burst enable bit           */
+#define  FMC_BCR2_WAITPOL                   ((uint32_t)0x00000200)        /*!<Wait signal polarity bit   */
+#define  FMC_BCR2_WRAPMOD                   ((uint32_t)0x00000400)        /*!<Wrapped burst mode support */
+#define  FMC_BCR2_WAITCFG                   ((uint32_t)0x00000800)        /*!<Wait timing configuration  */
+#define  FMC_BCR2_WREN                      ((uint32_t)0x00001000)        /*!<Write enable bit           */
+#define  FMC_BCR2_WAITEN                    ((uint32_t)0x00002000)        /*!<Wait enable bit            */
+#define  FMC_BCR2_EXTMOD                    ((uint32_t)0x00004000)        /*!<Extended mode enable       */
+#define  FMC_BCR2_ASYNCWAIT                 ((uint32_t)0x00008000)        /*!<Asynchronous wait          */
+#define  FMC_BCR2_CBURSTRW                  ((uint32_t)0x00080000)        /*!<Write burst enable         */
+
+/******************  Bit definition for FMC_BCR3 register  *******************/
+#define  FMC_BCR3_MBKEN                     ((uint32_t)0x00000001)        /*!<Memory bank enable bit                 */
+#define  FMC_BCR3_MUXEN                     ((uint32_t)0x00000002)        /*!<Address/data multiplexing enable bit   */
+
+#define  FMC_BCR3_MTYP                      ((uint32_t)0x0000000C)        /*!<MTYP[1:0] bits (Memory type)           */
+#define  FMC_BCR3_MTYP_0                    ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_BCR3_MTYP_1                    ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_BCR3_MWID                      ((uint32_t)0x00000030)        /*!<MWID[1:0] bits (Memory data bus width) */
+#define  FMC_BCR3_MWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BCR3_MWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_BCR3_FACCEN                    ((uint32_t)0x00000040)        /*!<Flash access enable        */
+#define  FMC_BCR3_BURSTEN                   ((uint32_t)0x00000100)        /*!<Burst enable bit           */
+#define  FMC_BCR3_WAITPOL                   ((uint32_t)0x00000200)        /*!<Wait signal polarity bit   */
+#define  FMC_BCR3_WRAPMOD                   ((uint32_t)0x00000400)        /*!<Wrapped burst mode support */
+#define  FMC_BCR3_WAITCFG                   ((uint32_t)0x00000800)        /*!<Wait timing configuration  */
+#define  FMC_BCR3_WREN                      ((uint32_t)0x00001000)        /*!<Write enable bit           */
+#define  FMC_BCR3_WAITEN                    ((uint32_t)0x00002000)        /*!<Wait enable bit            */
+#define  FMC_BCR3_EXTMOD                    ((uint32_t)0x00004000)        /*!<Extended mode enable       */
+#define  FMC_BCR3_ASYNCWAIT                 ((uint32_t)0x00008000)        /*!<Asynchronous wait          */
+#define  FMC_BCR3_CBURSTRW                  ((uint32_t)0x00080000)        /*!<Write burst enable         */
+
+/******************  Bit definition for FMC_BCR4 register  *******************/
+#define  FMC_BCR4_MBKEN                     ((uint32_t)0x00000001)        /*!<Memory bank enable bit                 */
+#define  FMC_BCR4_MUXEN                     ((uint32_t)0x00000002)        /*!<Address/data multiplexing enable bit   */
+
+#define  FMC_BCR4_MTYP                      ((uint32_t)0x0000000C)        /*!<MTYP[1:0] bits (Memory type)           */
+#define  FMC_BCR4_MTYP_0                    ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_BCR4_MTYP_1                    ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_BCR4_MWID                      ((uint32_t)0x00000030)        /*!<MWID[1:0] bits (Memory data bus width) */
+#define  FMC_BCR4_MWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BCR4_MWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_BCR4_FACCEN                    ((uint32_t)0x00000040)        /*!<Flash access enable        */
+#define  FMC_BCR4_BURSTEN                   ((uint32_t)0x00000100)        /*!<Burst enable bit           */
+#define  FMC_BCR4_WAITPOL                   ((uint32_t)0x00000200)        /*!<Wait signal polarity bit   */
+#define  FMC_BCR4_WRAPMOD                   ((uint32_t)0x00000400)        /*!<Wrapped burst mode support */
+#define  FMC_BCR4_WAITCFG                   ((uint32_t)0x00000800)        /*!<Wait timing configuration  */
+#define  FMC_BCR4_WREN                      ((uint32_t)0x00001000)        /*!<Write enable bit           */
+#define  FMC_BCR4_WAITEN                    ((uint32_t)0x00002000)        /*!<Wait enable bit            */
+#define  FMC_BCR4_EXTMOD                    ((uint32_t)0x00004000)        /*!<Extended mode enable       */
+#define  FMC_BCR4_ASYNCWAIT                 ((uint32_t)0x00008000)        /*!<Asynchronous wait          */
+#define  FMC_BCR4_CBURSTRW                  ((uint32_t)0x00080000)        /*!<Write burst enable         */
+
+/******************  Bit definition for FMC_BTR1 register  ******************/
+#define  FMC_BTR1_ADDSET                    ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BTR1_ADDSET_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BTR1_ADDSET_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BTR1_ADDSET_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BTR1_ADDSET_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BTR1_ADDHLD                    ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration)  */
+#define  FMC_BTR1_ADDHLD_0                  ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BTR1_ADDHLD_1                  ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BTR1_ADDHLD_2                  ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BTR1_ADDHLD_3                  ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BTR1_DATAST                    ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BTR1_DATAST_0                  ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BTR1_DATAST_1                  ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BTR1_DATAST_2                  ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BTR1_DATAST_3                  ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BTR1_DATAST_4                  ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BTR1_DATAST_5                  ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BTR1_DATAST_6                  ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BTR1_DATAST_7                  ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BTR1_BUSTURN                   ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BTR1_BUSTURN_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BTR1_BUSTURN_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BTR1_BUSTURN_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BTR1_BUSTURN_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BTR1_CLKDIV                    ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BTR1_CLKDIV_0                  ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BTR1_CLKDIV_1                  ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BTR1_CLKDIV_2                  ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BTR1_CLKDIV_3                  ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BTR1_DATLAT                    ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BTR1_DATLAT_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BTR1_DATLAT_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BTR1_DATLAT_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BTR1_DATLAT_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BTR1_ACCMOD                    ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BTR1_ACCMOD_0                  ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BTR1_ACCMOD_1                  ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BTR2 register  *******************/
+#define  FMC_BTR2_ADDSET                    ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BTR2_ADDSET_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BTR2_ADDSET_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BTR2_ADDSET_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BTR2_ADDSET_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BTR2_ADDHLD                    ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BTR2_ADDHLD_0                  ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BTR2_ADDHLD_1                  ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BTR2_ADDHLD_2                  ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BTR2_ADDHLD_3                  ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BTR2_DATAST                    ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BTR2_DATAST_0                  ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BTR2_DATAST_1                  ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BTR2_DATAST_2                  ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BTR2_DATAST_3                  ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BTR2_DATAST_4                  ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BTR2_DATAST_5                  ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BTR2_DATAST_6                  ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BTR2_DATAST_7                  ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BTR2_BUSTURN                   ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BTR2_BUSTURN_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BTR2_BUSTURN_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BTR2_BUSTURN_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BTR2_BUSTURN_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BTR2_CLKDIV                    ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BTR2_CLKDIV_0                  ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BTR2_CLKDIV_1                  ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BTR2_CLKDIV_2                  ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BTR2_CLKDIV_3                  ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BTR2_DATLAT                    ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BTR2_DATLAT_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BTR2_DATLAT_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BTR2_DATLAT_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BTR2_DATLAT_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BTR2_ACCMOD                    ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BTR2_ACCMOD_0                  ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BTR2_ACCMOD_1                  ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/*******************  Bit definition for FMC_BTR3 register  *******************/
+#define  FMC_BTR3_ADDSET                    ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BTR3_ADDSET_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BTR3_ADDSET_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BTR3_ADDSET_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BTR3_ADDSET_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BTR3_ADDHLD                    ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BTR3_ADDHLD_0                  ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BTR3_ADDHLD_1                  ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BTR3_ADDHLD_2                  ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BTR3_ADDHLD_3                  ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BTR3_DATAST                    ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BTR3_DATAST_0                  ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BTR3_DATAST_1                  ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BTR3_DATAST_2                  ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BTR3_DATAST_3                  ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BTR3_DATAST_4                  ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BTR3_DATAST_5                  ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BTR3_DATAST_6                  ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BTR3_DATAST_7                  ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BTR3_BUSTURN                   ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BTR3_BUSTURN_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BTR3_BUSTURN_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BTR3_BUSTURN_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BTR3_BUSTURN_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BTR3_CLKDIV                    ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BTR3_CLKDIV_0                  ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BTR3_CLKDIV_1                  ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BTR3_CLKDIV_2                  ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BTR3_CLKDIV_3                  ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BTR3_DATLAT                    ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BTR3_DATLAT_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BTR3_DATLAT_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BTR3_DATLAT_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BTR3_DATLAT_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BTR3_ACCMOD                    ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BTR3_ACCMOD_0                  ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BTR3_ACCMOD_1                  ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BTR4 register  *******************/
+#define  FMC_BTR4_ADDSET                    ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BTR4_ADDSET_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BTR4_ADDSET_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BTR4_ADDSET_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BTR4_ADDSET_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BTR4_ADDHLD                    ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BTR4_ADDHLD_0                  ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BTR4_ADDHLD_1                  ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BTR4_ADDHLD_2                  ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BTR4_ADDHLD_3                  ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BTR4_DATAST                    ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BTR4_DATAST_0                  ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BTR4_DATAST_1                  ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BTR4_DATAST_2                  ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BTR4_DATAST_3                  ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BTR4_DATAST_4                  ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BTR4_DATAST_5                  ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BTR4_DATAST_6                  ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BTR4_DATAST_7                  ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BTR4_BUSTURN                   ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BTR4_BUSTURN_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BTR4_BUSTURN_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BTR4_BUSTURN_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BTR4_BUSTURN_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BTR4_CLKDIV                    ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BTR4_CLKDIV_0                  ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BTR4_CLKDIV_1                  ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BTR4_CLKDIV_2                  ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BTR4_CLKDIV_3                  ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BTR4_DATLAT                    ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BTR4_DATLAT_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BTR4_DATLAT_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BTR4_DATLAT_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BTR4_DATLAT_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BTR4_ACCMOD                    ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BTR4_ACCMOD_0                  ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BTR4_ACCMOD_1                  ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BWTR1 register  ******************/
+#define  FMC_BWTR1_ADDSET                   ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BWTR1_ADDSET_0                 ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BWTR1_ADDSET_1                 ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BWTR1_ADDSET_2                 ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BWTR1_ADDSET_3                 ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BWTR1_ADDHLD                   ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BWTR1_ADDHLD_0                 ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BWTR1_ADDHLD_1                 ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BWTR1_ADDHLD_2                 ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BWTR1_ADDHLD_3                 ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BWTR1_DATAST                   ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BWTR1_DATAST_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BWTR1_DATAST_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BWTR1_DATAST_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BWTR1_DATAST_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BWTR1_DATAST_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BWTR1_DATAST_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BWTR1_DATAST_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BWTR1_DATAST_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BWTR1_BUSTURN                  ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround duration) */
+#define  FMC_BWTR1_BUSTURN_0                ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BWTR1_BUSTURN_1                ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BWTR1_BUSTURN_2                ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BWTR1_BUSTURN_3                ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BWTR1_CLKDIV                   ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BWTR1_CLKDIV_0                 ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BWTR1_CLKDIV_1                 ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BWTR1_CLKDIV_2                 ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BWTR1_CLKDIV_3                 ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BWTR1_DATLAT                   ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BWTR1_DATLAT_0                 ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BWTR1_DATLAT_1                 ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BWTR1_DATLAT_2                 ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BWTR1_DATLAT_3                 ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BWTR1_ACCMOD                   ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BWTR1_ACCMOD_0                 ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BWTR1_ACCMOD_1                 ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BWTR2 register  ******************/
+#define  FMC_BWTR2_ADDSET                   ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BWTR2_ADDSET_0                 ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BWTR2_ADDSET_1                 ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BWTR2_ADDSET_2                 ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BWTR2_ADDSET_3                 ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BWTR2_ADDHLD                   ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BWTR2_ADDHLD_0                 ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BWTR2_ADDHLD_1                 ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BWTR2_ADDHLD_2                 ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BWTR2_ADDHLD_3                 ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BWTR2_DATAST                   ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BWTR2_DATAST_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BWTR2_DATAST_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BWTR2_DATAST_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BWTR2_DATAST_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BWTR2_DATAST_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BWTR2_DATAST_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BWTR2_DATAST_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BWTR2_DATAST_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BWTR2_BUSTURN                  ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround duration) */
+#define  FMC_BWTR2_BUSTURN_0                ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BWTR2_BUSTURN_1                ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BWTR2_BUSTURN_2                ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BWTR2_BUSTURN_3                ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BWTR2_CLKDIV                   ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BWTR2_CLKDIV_0                 ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BWTR2_CLKDIV_1                 ((uint32_t)0x00200000)        /*!<Bit 1*/
+#define  FMC_BWTR2_CLKDIV_2                 ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BWTR2_CLKDIV_3                 ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BWTR2_DATLAT                   ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BWTR2_DATLAT_0                 ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BWTR2_DATLAT_1                 ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BWTR2_DATLAT_2                 ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BWTR2_DATLAT_3                 ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BWTR2_ACCMOD                   ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BWTR2_ACCMOD_0                 ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BWTR2_ACCMOD_1                 ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BWTR3 register  ******************/
+#define  FMC_BWTR3_ADDSET                   ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BWTR3_ADDSET_0                 ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BWTR3_ADDSET_1                 ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BWTR3_ADDSET_2                 ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BWTR3_ADDSET_3                 ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BWTR3_ADDHLD                   ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BWTR3_ADDHLD_0                 ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BWTR3_ADDHLD_1                 ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BWTR3_ADDHLD_2                 ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BWTR3_ADDHLD_3                 ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BWTR3_DATAST                   ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BWTR3_DATAST_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BWTR3_DATAST_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BWTR3_DATAST_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BWTR3_DATAST_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BWTR3_DATAST_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BWTR3_DATAST_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BWTR3_DATAST_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BWTR3_DATAST_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BWTR3_BUSTURN                  ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround duration) */
+#define  FMC_BWTR3_BUSTURN_0                ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BWTR3_BUSTURN_1                ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BWTR3_BUSTURN_2                ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BWTR3_BUSTURN_3                ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BWTR3_CLKDIV                   ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BWTR3_CLKDIV_0                 ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BWTR3_CLKDIV_1                 ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BWTR3_CLKDIV_2                 ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BWTR3_CLKDIV_3                 ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BWTR3_DATLAT                   ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BWTR3_DATLAT_0                 ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BWTR3_DATLAT_1                 ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BWTR3_DATLAT_2                 ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BWTR3_DATLAT_3                 ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BWTR3_ACCMOD                   ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BWTR3_ACCMOD_0                 ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BWTR3_ACCMOD_1                 ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BWTR4 register  ******************/
+#define  FMC_BWTR4_ADDSET                   ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BWTR4_ADDSET_0                 ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BWTR4_ADDSET_1                 ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BWTR4_ADDSET_2                 ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BWTR4_ADDSET_3                 ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BWTR4_ADDHLD                   ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BWTR4_ADDHLD_0                 ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BWTR4_ADDHLD_1                 ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BWTR4_ADDHLD_2                 ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BWTR4_ADDHLD_3                 ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BWTR4_DATAST                   ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BWTR4_DATAST_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BWTR4_DATAST_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BWTR4_DATAST_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BWTR4_DATAST_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BWTR4_DATAST_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BWTR4_DATAST_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BWTR4_DATAST_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BWTR4_DATAST_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BWTR4_BUSTURN                  ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround duration) */
+#define  FMC_BWTR4_BUSTURN_0                ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BWTR4_BUSTURN_1                ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BWTR4_BUSTURN_2                ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BWTR4_BUSTURN_3                ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BWTR4_CLKDIV                   ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BWTR4_CLKDIV_0                 ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BWTR4_CLKDIV_1                 ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BWTR4_CLKDIV_2                 ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BWTR4_CLKDIV_3                 ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BWTR4_DATLAT                   ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BWTR4_DATLAT_0                 ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BWTR4_DATLAT_1                 ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BWTR4_DATLAT_2                 ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BWTR4_DATLAT_3                 ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BWTR4_ACCMOD                   ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BWTR4_ACCMOD_0                 ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BWTR4_ACCMOD_1                 ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_PCR2 register  *******************/
+#define  FMC_PCR2_PWAITEN                   ((uint32_t)0x00000002)        /*!<Wait feature enable bit                   */
+#define  FMC_PCR2_PBKEN                     ((uint32_t)0x00000004)        /*!<PC Card/NAND Flash memory bank enable bit */
+#define  FMC_PCR2_PTYP                      ((uint32_t)0x00000008)        /*!<Memory type                               */
+
+#define  FMC_PCR2_PWID                      ((uint32_t)0x00000030)        /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define  FMC_PCR2_PWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_PCR2_PWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_PCR2_ECCEN                     ((uint32_t)0x00000040)        /*!<ECC computation logic enable bit          */
+
+#define  FMC_PCR2_TCLR                      ((uint32_t)0x00001E00)        /*!<TCLR[3:0] bits (CLE to RE delay)          */
+#define  FMC_PCR2_TCLR_0                    ((uint32_t)0x00000200)        /*!<Bit 0 */
+#define  FMC_PCR2_TCLR_1                    ((uint32_t)0x00000400)        /*!<Bit 1 */
+#define  FMC_PCR2_TCLR_2                    ((uint32_t)0x00000800)        /*!<Bit 2 */
+#define  FMC_PCR2_TCLR_3                    ((uint32_t)0x00001000)        /*!<Bit 3 */
+
+#define  FMC_PCR2_TAR                       ((uint32_t)0x0001E000)        /*!<TAR[3:0] bits (ALE to RE delay)           */
+#define  FMC_PCR2_TAR_0                     ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  FMC_PCR2_TAR_1                     ((uint32_t)0x00004000)        /*!<Bit 1 */
+#define  FMC_PCR2_TAR_2                     ((uint32_t)0x00008000)        /*!<Bit 2 */
+#define  FMC_PCR2_TAR_3                     ((uint32_t)0x00010000)        /*!<Bit 3 */
+
+#define  FMC_PCR2_ECCPS                     ((uint32_t)0x000E0000)        /*!<ECCPS[1:0] bits (ECC page size)           */
+#define  FMC_PCR2_ECCPS_0                   ((uint32_t)0x00020000)        /*!<Bit 0 */
+#define  FMC_PCR2_ECCPS_1                   ((uint32_t)0x00040000)        /*!<Bit 1 */
+#define  FMC_PCR2_ECCPS_2                   ((uint32_t)0x00080000)        /*!<Bit 2 */
+
+/******************  Bit definition for FMC_PCR3 register  *******************/
+#define  FMC_PCR3_PWAITEN                   ((uint32_t)0x00000002)        /*!<Wait feature enable bit                   */
+#define  FMC_PCR3_PBKEN                     ((uint32_t)0x00000004)        /*!<PC Card/NAND Flash memory bank enable bit */
+#define  FMC_PCR3_PTYP                      ((uint32_t)0x00000008)        /*!<Memory type                               */
+
+#define  FMC_PCR3_PWID                      ((uint32_t)0x00000030)        /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define  FMC_PCR3_PWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_PCR3_PWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_PCR3_ECCEN                     ((uint32_t)0x00000040)        /*!<ECC computation logic enable bit          */
+
+#define  FMC_PCR3_TCLR                      ((uint32_t)0x00001E00)        /*!<TCLR[3:0] bits (CLE to RE delay)          */
+#define  FMC_PCR3_TCLR_0                    ((uint32_t)0x00000200)        /*!<Bit 0 */
+#define  FMC_PCR3_TCLR_1                    ((uint32_t)0x00000400)        /*!<Bit 1 */
+#define  FMC_PCR3_TCLR_2                    ((uint32_t)0x00000800)        /*!<Bit 2 */
+#define  FMC_PCR3_TCLR_3                    ((uint32_t)0x00001000)        /*!<Bit 3 */
+
+#define  FMC_PCR3_TAR                       ((uint32_t)0x0001E000)        /*!<TAR[3:0] bits (ALE to RE delay)           */
+#define  FMC_PCR3_TAR_0                     ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  FMC_PCR3_TAR_1                     ((uint32_t)0x00004000)        /*!<Bit 1 */
+#define  FMC_PCR3_TAR_2                     ((uint32_t)0x00008000)        /*!<Bit 2 */
+#define  FMC_PCR3_TAR_3                     ((uint32_t)0x00010000)        /*!<Bit 3 */
+
+#define  FMC_PCR3_ECCPS                     ((uint32_t)0x000E0000)        /*!<ECCPS[2:0] bits (ECC page size)           */
+#define  FMC_PCR3_ECCPS_0                   ((uint32_t)0x00020000)        /*!<Bit 0 */
+#define  FMC_PCR3_ECCPS_1                   ((uint32_t)0x00040000)        /*!<Bit 1 */
+#define  FMC_PCR3_ECCPS_2                   ((uint32_t)0x00080000)        /*!<Bit 2 */
+
+/******************  Bit definition for FMC_PCR4 register  *******************/
+#define  FMC_PCR4_PWAITEN                   ((uint32_t)0x00000002)        /*!<Wait feature enable bit                   */
+#define  FMC_PCR4_PBKEN                     ((uint32_t)0x00000004)        /*!<PC Card/NAND Flash memory bank enable bit */
+#define  FMC_PCR4_PTYP                      ((uint32_t)0x00000008)        /*!<Memory type                               */
+
+#define  FMC_PCR4_PWID                      ((uint32_t)0x00000030)        /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define  FMC_PCR4_PWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_PCR4_PWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_PCR4_ECCEN                     ((uint32_t)0x00000040)        /*!<ECC computation logic enable bit          */
+
+#define  FMC_PCR4_TCLR                      ((uint32_t)0x00001E00)        /*!<TCLR[3:0] bits (CLE to RE delay)          */
+#define  FMC_PCR4_TCLR_0                    ((uint32_t)0x00000200)        /*!<Bit 0 */
+#define  FMC_PCR4_TCLR_1                    ((uint32_t)0x00000400)        /*!<Bit 1 */
+#define  FMC_PCR4_TCLR_2                    ((uint32_t)0x00000800)        /*!<Bit 2 */
+#define  FMC_PCR4_TCLR_3                    ((uint32_t)0x00001000)        /*!<Bit 3 */
+
+#define  FMC_PCR4_TAR                       ((uint32_t)0x0001E000)        /*!<TAR[3:0] bits (ALE to RE delay)           */
+#define  FMC_PCR4_TAR_0                     ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  FMC_PCR4_TAR_1                     ((uint32_t)0x00004000)        /*!<Bit 1 */
+#define  FMC_PCR4_TAR_2                     ((uint32_t)0x00008000)        /*!<Bit 2 */
+#define  FMC_PCR4_TAR_3                     ((uint32_t)0x00010000)        /*!<Bit 3 */
+
+#define  FMC_PCR4_ECCPS                     ((uint32_t)0x000E0000)        /*!<ECCPS[2:0] bits (ECC page size)           */
+#define  FMC_PCR4_ECCPS_0                   ((uint32_t)0x00020000)        /*!<Bit 0 */
+#define  FMC_PCR4_ECCPS_1                   ((uint32_t)0x00040000)        /*!<Bit 1 */
+#define  FMC_PCR4_ECCPS_2                   ((uint32_t)0x00080000)        /*!<Bit 2 */
+
+/*******************  Bit definition for FMC_SR2 register  *******************/
+#define  FMC_SR2_IRS                        ((uint32_t)0x01)               /*!<Interrupt Rising Edge status                */
+#define  FMC_SR2_ILS                        ((uint32_t)0x02)               /*!<Interrupt Level status                      */
+#define  FMC_SR2_IFS                        ((uint32_t)0x04)               /*!<Interrupt Falling Edge status               */
+#define  FMC_SR2_IREN                       ((uint32_t)0x08)               /*!<Interrupt Rising Edge detection Enable bit  */
+#define  FMC_SR2_ILEN                       ((uint32_t)0x10)               /*!<Interrupt Level detection Enable bit        */
+#define  FMC_SR2_IFEN                       ((uint32_t)0x20)               /*!<Interrupt Falling Edge detection Enable bit */
+#define  FMC_SR2_FEMPT                      ((uint32_t)0x40)               /*!<FIFO empty                                  */
+
+/*******************  Bit definition for FMC_SR3 register  *******************/
+#define  FMC_SR3_IRS                        ((uint32_t)0x01)               /*!<Interrupt Rising Edge status                */
+#define  FMC_SR3_ILS                        ((uint32_t)0x02)               /*!<Interrupt Level status                      */
+#define  FMC_SR3_IFS                        ((uint32_t)0x04)               /*!<Interrupt Falling Edge status               */
+#define  FMC_SR3_IREN                       ((uint32_t)0x08)               /*!<Interrupt Rising Edge detection Enable bit  */
+#define  FMC_SR3_ILEN                       ((uint32_t)0x10)               /*!<Interrupt Level detection Enable bit        */
+#define  FMC_SR3_IFEN                       ((uint32_t)0x20)               /*!<Interrupt Falling Edge detection Enable bit */
+#define  FMC_SR3_FEMPT                      ((uint32_t)0x40)               /*!<FIFO empty                                  */
+
+/*******************  Bit definition for FMC_SR4 register  *******************/
+#define  FMC_SR4_IRS                        ((uint32_t)0x01)               /*!<Interrupt Rising Edge status                */
+#define  FMC_SR4_ILS                        ((uint32_t)0x02)               /*!<Interrupt Level status                      */
+#define  FMC_SR4_IFS                        ((uint32_t)0x04)               /*!<Interrupt Falling Edge status               */
+#define  FMC_SR4_IREN                       ((uint32_t)0x08)               /*!<Interrupt Rising Edge detection Enable bit  */
+#define  FMC_SR4_ILEN                       ((uint32_t)0x10)               /*!<Interrupt Level detection Enable bit        */
+#define  FMC_SR4_IFEN                       ((uint32_t)0x20)               /*!<Interrupt Falling Edge detection Enable bit */
+#define  FMC_SR4_FEMPT                      ((uint32_t)0x40)               /*!<FIFO empty                                  */
+
+/******************  Bit definition for FMC_PMEM2 register  ******************/
+#define  FMC_PMEM2_MEMSET2                  ((uint32_t)0x000000FF)        /*!<MEMSET2[7:0] bits (Common memory 2 setup time) */
+#define  FMC_PMEM2_MEMSET2_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_PMEM2_MEMSET2_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_PMEM2_MEMSET2_2                ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_PMEM2_MEMSET2_3                ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  FMC_PMEM2_MEMSET2_4                ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  FMC_PMEM2_MEMSET2_5                ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  FMC_PMEM2_MEMSET2_6                ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  FMC_PMEM2_MEMSET2_7                ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  FMC_PMEM2_MEMWAIT2                 ((uint32_t)0x0000FF00)        /*!<MEMWAIT2[7:0] bits (Common memory 2 wait time) */
+#define  FMC_PMEM2_MEMWAIT2_0               ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_PMEM2_MEMWAIT2_1               ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_PMEM2_MEMWAIT2_2               ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_PMEM2_MEMWAIT2_3               ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_PMEM2_MEMWAIT2_4               ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_PMEM2_MEMWAIT2_5               ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_PMEM2_MEMWAIT2_6               ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_PMEM2_MEMWAIT2_7               ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_PMEM2_MEMHOLD2                 ((uint32_t)0x00FF0000)        /*!<MEMHOLD2[7:0] bits (Common memory 2 hold time) */
+#define  FMC_PMEM2_MEMHOLD2_0               ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_PMEM2_MEMHOLD2_1               ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_PMEM2_MEMHOLD2_2               ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_PMEM2_MEMHOLD2_3               ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  FMC_PMEM2_MEMHOLD2_4               ((uint32_t)0x00100000)        /*!<Bit 4 */
+#define  FMC_PMEM2_MEMHOLD2_5               ((uint32_t)0x00200000)        /*!<Bit 5 */
+#define  FMC_PMEM2_MEMHOLD2_6               ((uint32_t)0x00400000)        /*!<Bit 6 */
+#define  FMC_PMEM2_MEMHOLD2_7               ((uint32_t)0x00800000)        /*!<Bit 7 */
+
+#define  FMC_PMEM2_MEMHIZ2                  ((uint32_t)0xFF000000)        /*!<MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */
+#define  FMC_PMEM2_MEMHIZ2_0                ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_PMEM2_MEMHIZ2_1                ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_PMEM2_MEMHIZ2_2                ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_PMEM2_MEMHIZ2_3                ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  FMC_PMEM2_MEMHIZ2_4                ((uint32_t)0x10000000)        /*!<Bit 4 */
+#define  FMC_PMEM2_MEMHIZ2_5                ((uint32_t)0x20000000)        /*!<Bit 5 */
+#define  FMC_PMEM2_MEMHIZ2_6                ((uint32_t)0x40000000)        /*!<Bit 6 */
+#define  FMC_PMEM2_MEMHIZ2_7                ((uint32_t)0x80000000)        /*!<Bit 7 */
+
+/******************  Bit definition for FMC_PMEM3 register  ******************/
+#define  FMC_PMEM3_MEMSET3                  ((uint32_t)0x000000FF)        /*!<MEMSET3[7:0] bits (Common memory 3 setup time) */
+#define  FMC_PMEM3_MEMSET3_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_PMEM3_MEMSET3_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_PMEM3_MEMSET3_2                ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_PMEM3_MEMSET3_3                ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  FMC_PMEM3_MEMSET3_4                ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  FMC_PMEM3_MEMSET3_5                ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  FMC_PMEM3_MEMSET3_6                ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  FMC_PMEM3_MEMSET3_7                ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  FMC_PMEM3_MEMWAIT3                 ((uint32_t)0x0000FF00)        /*!<MEMWAIT3[7:0] bits (Common memory 3 wait time) */
+#define  FMC_PMEM3_MEMWAIT3_0               ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_PMEM3_MEMWAIT3_1               ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_PMEM3_MEMWAIT3_2               ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_PMEM3_MEMWAIT3_3               ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_PMEM3_MEMWAIT3_4               ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_PMEM3_MEMWAIT3_5               ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_PMEM3_MEMWAIT3_6               ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_PMEM3_MEMWAIT3_7               ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_PMEM3_MEMHOLD3                 ((uint32_t)0x00FF0000)        /*!<MEMHOLD3[7:0] bits (Common memory 3 hold time) */
+#define  FMC_PMEM3_MEMHOLD3_0               ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_PMEM3_MEMHOLD3_1               ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_PMEM3_MEMHOLD3_2               ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_PMEM3_MEMHOLD3_3               ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  FMC_PMEM3_MEMHOLD3_4               ((uint32_t)0x00100000)        /*!<Bit 4 */
+#define  FMC_PMEM3_MEMHOLD3_5               ((uint32_t)0x00200000)        /*!<Bit 5 */
+#define  FMC_PMEM3_MEMHOLD3_6               ((uint32_t)0x00400000)        /*!<Bit 6 */
+#define  FMC_PMEM3_MEMHOLD3_7               ((uint32_t)0x00800000)        /*!<Bit 7 */
+
+#define  FMC_PMEM3_MEMHIZ3                  ((uint32_t)0xFF000000)        /*!<MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */
+#define  FMC_PMEM3_MEMHIZ3_0                ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_PMEM3_MEMHIZ3_1                ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_PMEM3_MEMHIZ3_2                ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_PMEM3_MEMHIZ3_3                ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  FMC_PMEM3_MEMHIZ3_4                ((uint32_t)0x10000000)        /*!<Bit 4 */
+#define  FMC_PMEM3_MEMHIZ3_5                ((uint32_t)0x20000000)        /*!<Bit 5 */
+#define  FMC_PMEM3_MEMHIZ3_6                ((uint32_t)0x40000000)        /*!<Bit 6 */
+#define  FMC_PMEM3_MEMHIZ3_7                ((uint32_t)0x80000000)        /*!<Bit 7 */
+
+/******************  Bit definition for FMC_PMEM4 register  ******************/
+#define  FMC_PMEM4_MEMSET4                  ((uint32_t)0x000000FF)        /*!<MEMSET4[7:0] bits (Common memory 4 setup time) */
+#define  FMC_PMEM4_MEMSET4_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_PMEM4_MEMSET4_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_PMEM4_MEMSET4_2                ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_PMEM4_MEMSET4_3                ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  FMC_PMEM4_MEMSET4_4                ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  FMC_PMEM4_MEMSET4_5                ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  FMC_PMEM4_MEMSET4_6                ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  FMC_PMEM4_MEMSET4_7                ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  FMC_PMEM4_MEMWAIT4                 ((uint32_t)0x0000FF00)        /*!<MEMWAIT4[7:0] bits (Common memory 4 wait time) */
+#define  FMC_PMEM4_MEMWAIT4_0               ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_PMEM4_MEMWAIT4_1               ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_PMEM4_MEMWAIT4_2               ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_PMEM4_MEMWAIT4_3               ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_PMEM4_MEMWAIT4_4               ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_PMEM4_MEMWAIT4_5               ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_PMEM4_MEMWAIT4_6               ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_PMEM4_MEMWAIT4_7               ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_PMEM4_MEMHOLD4                 ((uint32_t)0x00FF0000)        /*!<MEMHOLD4[7:0] bits (Common memory 4 hold time) */
+#define  FMC_PMEM4_MEMHOLD4_0               ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_PMEM4_MEMHOLD4_1               ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_PMEM4_MEMHOLD4_2               ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_PMEM4_MEMHOLD4_3               ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  FMC_PMEM4_MEMHOLD4_4               ((uint32_t)0x00100000)        /*!<Bit 4 */
+#define  FMC_PMEM4_MEMHOLD4_5               ((uint32_t)0x00200000)        /*!<Bit 5 */
+#define  FMC_PMEM4_MEMHOLD4_6               ((uint32_t)0x00400000)        /*!<Bit 6 */
+#define  FMC_PMEM4_MEMHOLD4_7               ((uint32_t)0x00800000)        /*!<Bit 7 */
+
+#define  FMC_PMEM4_MEMHIZ4                  ((uint32_t)0xFF000000)        /*!<MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */
+#define  FMC_PMEM4_MEMHIZ4_0                ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_PMEM4_MEMHIZ4_1                ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_PMEM4_MEMHIZ4_2                ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_PMEM4_MEMHIZ4_3                ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  FMC_PMEM4_MEMHIZ4_4                ((uint32_t)0x10000000)        /*!<Bit 4 */
+#define  FMC_PMEM4_MEMHIZ4_5                ((uint32_t)0x20000000)        /*!<Bit 5 */
+#define  FMC_PMEM4_MEMHIZ4_6                ((uint32_t)0x40000000)        /*!<Bit 6 */
+#define  FMC_PMEM4_MEMHIZ4_7                ((uint32_t)0x80000000)        /*!<Bit 7 */
+
+/******************  Bit definition for FMC_PATT2 register  ******************/
+#define  FMC_PATT2_ATTSET2                  ((uint32_t)0x000000FF)        /*!<ATTSET2[7:0] bits (Attribute memory 2 setup time) */
+#define  FMC_PATT2_ATTSET2_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_PATT2_ATTSET2_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_PATT2_ATTSET2_2                ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_PATT2_ATTSET2_3                ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  FMC_PATT2_ATTSET2_4                ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  FMC_PATT2_ATTSET2_5                ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  FMC_PATT2_ATTSET2_6                ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  FMC_PATT2_ATTSET2_7                ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  FMC_PATT2_ATTWAIT2                 ((uint32_t)0x0000FF00)        /*!<ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */
+#define  FMC_PATT2_ATTWAIT2_0               ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_PATT2_ATTWAIT2_1               ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_PATT2_ATTWAIT2_2               ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_PATT2_ATTWAIT2_3               ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_PATT2_ATTWAIT2_4               ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_PATT2_ATTWAIT2_5               ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_PATT2_ATTWAIT2_6               ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_PATT2_ATTWAIT2_7               ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_PATT2_ATTHOLD2                 ((uint32_t)0x00FF0000)        /*!<ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */
+#define  FMC_PATT2_ATTHOLD2_0               ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_PATT2_ATTHOLD2_1               ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_PATT2_ATTHOLD2_2               ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_PATT2_ATTHOLD2_3               ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  FMC_PATT2_ATTHOLD2_4               ((uint32_t)0x00100000)        /*!<Bit 4 */
+#define  FMC_PATT2_ATTHOLD2_5               ((uint32_t)0x00200000)        /*!<Bit 5 */
+#define  FMC_PATT2_ATTHOLD2_6               ((uint32_t)0x00400000)        /*!<Bit 6 */
+#define  FMC_PATT2_ATTHOLD2_7               ((uint32_t)0x00800000)        /*!<Bit 7 */
+
+#define  FMC_PATT2_ATTHIZ2                  ((uint32_t)0xFF000000)        /*!<ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */
+#define  FMC_PATT2_ATTHIZ2_0                ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_PATT2_ATTHIZ2_1                ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_PATT2_ATTHIZ2_2                ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_PATT2_ATTHIZ2_3                ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  FMC_PATT2_ATTHIZ2_4                ((uint32_t)0x10000000)        /*!<Bit 4 */
+#define  FMC_PATT2_ATTHIZ2_5                ((uint32_t)0x20000000)        /*!<Bit 5 */
+#define  FMC_PATT2_ATTHIZ2_6                ((uint32_t)0x40000000)        /*!<Bit 6 */
+#define  FMC_PATT2_ATTHIZ2_7                ((uint32_t)0x80000000)        /*!<Bit 7 */
+
+/******************  Bit definition for FMC_PATT3 register  ******************/
+#define  FMC_PATT3_ATTSET3                  ((uint32_t)0x000000FF)        /*!<ATTSET3[7:0] bits (Attribute memory 3 setup time) */
+#define  FMC_PATT3_ATTSET3_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_PATT3_ATTSET3_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_PATT3_ATTSET3_2                ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_PATT3_ATTSET3_3                ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  FMC_PATT3_ATTSET3_4                ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  FMC_PATT3_ATTSET3_5                ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  FMC_PATT3_ATTSET3_6                ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  FMC_PATT3_ATTSET3_7                ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  FMC_PATT3_ATTWAIT3                 ((uint32_t)0x0000FF00)        /*!<ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */
+#define  FMC_PATT3_ATTWAIT3_0               ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_PATT3_ATTWAIT3_1               ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_PATT3_ATTWAIT3_2               ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_PATT3_ATTWAIT3_3               ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_PATT3_ATTWAIT3_4               ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_PATT3_ATTWAIT3_5               ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_PATT3_ATTWAIT3_6               ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_PATT3_ATTWAIT3_7               ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_PATT3_ATTHOLD3                 ((uint32_t)0x00FF0000)        /*!<ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */
+#define  FMC_PATT3_ATTHOLD3_0               ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_PATT3_ATTHOLD3_1               ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_PATT3_ATTHOLD3_2               ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_PATT3_ATTHOLD3_3               ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  FMC_PATT3_ATTHOLD3_4               ((uint32_t)0x00100000)        /*!<Bit 4 */
+#define  FMC_PATT3_ATTHOLD3_5               ((uint32_t)0x00200000)        /*!<Bit 5 */
+#define  FMC_PATT3_ATTHOLD3_6               ((uint32_t)0x00400000)        /*!<Bit 6 */
+#define  FMC_PATT3_ATTHOLD3_7               ((uint32_t)0x00800000)        /*!<Bit 7 */
+
+#define  FMC_PATT3_ATTHIZ3                  ((uint32_t)0xFF000000)        /*!<ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */
+#define  FMC_PATT3_ATTHIZ3_0                ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_PATT3_ATTHIZ3_1                ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_PATT3_ATTHIZ3_2                ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_PATT3_ATTHIZ3_3                ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  FMC_PATT3_ATTHIZ3_4                ((uint32_t)0x10000000)        /*!<Bit 4 */
+#define  FMC_PATT3_ATTHIZ3_5                ((uint32_t)0x20000000)        /*!<Bit 5 */
+#define  FMC_PATT3_ATTHIZ3_6                ((uint32_t)0x40000000)        /*!<Bit 6 */
+#define  FMC_PATT3_ATTHIZ3_7                ((uint32_t)0x80000000)        /*!<Bit 7 */
+
+/******************  Bit definition for FMC_PATT4 register  ******************/
+#define  FMC_PATT4_ATTSET4                  ((uint32_t)0x000000FF)        /*!<ATTSET4[7:0] bits (Attribute memory 4 setup time) */
+#define  FMC_PATT4_ATTSET4_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_PATT4_ATTSET4_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_PATT4_ATTSET4_2                ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_PATT4_ATTSET4_3                ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  FMC_PATT4_ATTSET4_4                ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  FMC_PATT4_ATTSET4_5                ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  FMC_PATT4_ATTSET4_6                ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  FMC_PATT4_ATTSET4_7                ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  FMC_PATT4_ATTWAIT4                 ((uint32_t)0x0000FF00)        /*!<ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */
+#define  FMC_PATT4_ATTWAIT4_0               ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_PATT4_ATTWAIT4_1               ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_PATT4_ATTWAIT4_2               ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_PATT4_ATTWAIT4_3               ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_PATT4_ATTWAIT4_4               ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_PATT4_ATTWAIT4_5               ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_PATT4_ATTWAIT4_6               ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_PATT4_ATTWAIT4_7               ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_PATT4_ATTHOLD4                 ((uint32_t)0x00FF0000)        /*!<ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */
+#define  FMC_PATT4_ATTHOLD4_0               ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_PATT4_ATTHOLD4_1               ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_PATT4_ATTHOLD4_2               ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_PATT4_ATTHOLD4_3               ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  FMC_PATT4_ATTHOLD4_4               ((uint32_t)0x00100000)        /*!<Bit 4 */
+#define  FMC_PATT4_ATTHOLD4_5               ((uint32_t)0x00200000)        /*!<Bit 5 */
+#define  FMC_PATT4_ATTHOLD4_6               ((uint32_t)0x00400000)        /*!<Bit 6 */
+#define  FMC_PATT4_ATTHOLD4_7               ((uint32_t)0x00800000)        /*!<Bit 7 */
+
+#define  FMC_PATT4_ATTHIZ4                  ((uint32_t)0xFF000000)        /*!<ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */
+#define  FMC_PATT4_ATTHIZ4_0                ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_PATT4_ATTHIZ4_1                ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_PATT4_ATTHIZ4_2                ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_PATT4_ATTHIZ4_3                ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  FMC_PATT4_ATTHIZ4_4                ((uint32_t)0x10000000)        /*!<Bit 4 */
+#define  FMC_PATT4_ATTHIZ4_5                ((uint32_t)0x20000000)        /*!<Bit 5 */
+#define  FMC_PATT4_ATTHIZ4_6                ((uint32_t)0x40000000)        /*!<Bit 6 */
+#define  FMC_PATT4_ATTHIZ4_7                ((uint32_t)0x80000000)        /*!<Bit 7 */
+
+/******************  Bit definition for FMC_PIO4 register  *******************/
+#define  FMC_PIO4_IOSET4                    ((uint32_t)0x000000FF)        /*!<IOSET4[7:0] bits (I/O 4 setup time) */
+#define  FMC_PIO4_IOSET4_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_PIO4_IOSET4_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_PIO4_IOSET4_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_PIO4_IOSET4_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  FMC_PIO4_IOSET4_4                  ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  FMC_PIO4_IOSET4_5                  ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  FMC_PIO4_IOSET4_6                  ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  FMC_PIO4_IOSET4_7                  ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  FMC_PIO4_IOWAIT4                   ((uint32_t)0x0000FF00)        /*!<IOWAIT4[7:0] bits (I/O 4 wait time) */
+#define  FMC_PIO4_IOWAIT4_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_PIO4_IOWAIT4_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_PIO4_IOWAIT4_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_PIO4_IOWAIT4_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_PIO4_IOWAIT4_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_PIO4_IOWAIT4_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_PIO4_IOWAIT4_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_PIO4_IOWAIT4_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_PIO4_IOHOLD4                   ((uint32_t)0x00FF0000)        /*!<IOHOLD4[7:0] bits (I/O 4 hold time) */
+#define  FMC_PIO4_IOHOLD4_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_PIO4_IOHOLD4_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_PIO4_IOHOLD4_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_PIO4_IOHOLD4_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  FMC_PIO4_IOHOLD4_4                 ((uint32_t)0x00100000)        /*!<Bit 4 */
+#define  FMC_PIO4_IOHOLD4_5                 ((uint32_t)0x00200000)        /*!<Bit 5 */
+#define  FMC_PIO4_IOHOLD4_6                 ((uint32_t)0x00400000)        /*!<Bit 6 */
+#define  FMC_PIO4_IOHOLD4_7                 ((uint32_t)0x00800000)        /*!<Bit 7 */
+
+#define  FMC_PIO4_IOHIZ4                    ((uint32_t)0xFF000000)        /*!<IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */
+#define  FMC_PIO4_IOHIZ4_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_PIO4_IOHIZ4_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_PIO4_IOHIZ4_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_PIO4_IOHIZ4_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  FMC_PIO4_IOHIZ4_4                  ((uint32_t)0x10000000)        /*!<Bit 4 */
+#define  FMC_PIO4_IOHIZ4_5                  ((uint32_t)0x20000000)        /*!<Bit 5 */
+#define  FMC_PIO4_IOHIZ4_6                  ((uint32_t)0x40000000)        /*!<Bit 6 */
+#define  FMC_PIO4_IOHIZ4_7                  ((uint32_t)0x80000000)        /*!<Bit 7 */
+
+/******************  Bit definition for FMC_ECCR2 register  ******************/
+#define  FMC_ECCR2_ECC2                     ((uint32_t)0xFFFFFFFF)        /*!<ECC result */
+
+/******************  Bit definition for FMC_ECCR3 register  ******************/
+#define  FMC_ECCR3_ECC3                     ((uint32_t)0xFFFFFFFF)        /*!<ECC result */
+
+/******************  Bit definition for FMC_SDCR1 register  ******************/
+#define  FMC_SDCR1_NC                       ((uint32_t)0x00000003)        /*!<NC[1:0] bits (Number of column bits) */
+#define  FMC_SDCR1_NC_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDCR1_NC_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_NR                       ((uint32_t)0x0000000C)        /*!<NR[1:0] bits (Number of row bits) */
+#define  FMC_SDCR1_NR_0                     ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_SDCR1_NR_1                     ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_MWID                     ((uint32_t)0x00000030)        /*!<NR[1:0] bits (Number of row bits) */
+#define  FMC_SDCR1_MWID_0                   ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_SDCR1_MWID_1                   ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_NB                       ((uint32_t)0x00000040)        /*!<Number of internal bank */
+
+#define  FMC_SDCR1_CAS                      ((uint32_t)0x00000180)        /*!<CAS[1:0] bits (CAS latency) */
+#define  FMC_SDCR1_CAS_0                    ((uint32_t)0x00000080)        /*!<Bit 0 */
+#define  FMC_SDCR1_CAS_1                    ((uint32_t)0x00000100)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_WP                       ((uint32_t)0x00000200)        /*!<Write protection */
+
+#define  FMC_SDCR1_SDCLK                    ((uint32_t)0x00000C00)        /*!<SDRAM clock configuration */
+#define  FMC_SDCR1_SDCLK_0                  ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  FMC_SDCR1_SDCLK_1                  ((uint32_t)0x00000800)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_RBURST                   ((uint32_t)0x00001000)        /*!<Read burst */
+
+#define  FMC_SDCR1_RPIPE                    ((uint32_t)0x00006000)        /*!<Write protection */
+#define  FMC_SDCR1_RPIPE_0                  ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  FMC_SDCR1_RPIPE_1                  ((uint32_t)0x00004000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_SDCR2 register  ******************/
+#define  FMC_SDCR2_NC                       ((uint32_t)0x00000003)        /*!<NC[1:0] bits (Number of column bits) */
+#define  FMC_SDCR2_NC_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDCR2_NC_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_NR                       ((uint32_t)0x0000000C)        /*!<NR[1:0] bits (Number of row bits) */
+#define  FMC_SDCR2_NR_0                     ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_SDCR2_NR_1                     ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_MWID                     ((uint32_t)0x00000030)        /*!<NR[1:0] bits (Number of row bits) */
+#define  FMC_SDCR2_MWID_0                   ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_SDCR2_MWID_1                   ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_NB                       ((uint32_t)0x00000040)        /*!<Number of internal bank */
+
+#define  FMC_SDCR2_CAS                      ((uint32_t)0x00000180)        /*!<CAS[1:0] bits (CAS latency) */
+#define  FMC_SDCR2_CAS_0                    ((uint32_t)0x00000080)        /*!<Bit 0 */
+#define  FMC_SDCR2_CAS_1                    ((uint32_t)0x00000100)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_WP                       ((uint32_t)0x00000200)        /*!<Write protection */
+
+#define  FMC_SDCR2_SDCLK                    ((uint32_t)0x00000C00)        /*!<SDCLK[1:0] (SDRAM clock configuration) */
+#define  FMC_SDCR2_SDCLK_0                  ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  FMC_SDCR2_SDCLK_1                  ((uint32_t)0x00000800)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_RBURST                   ((uint32_t)0x00001000)        /*!<Read burst */
+
+#define  FMC_SDCR2_RPIPE                    ((uint32_t)0x00006000)        /*!<RPIPE[1:0](Read pipe) */
+#define  FMC_SDCR2_RPIPE_0                  ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  FMC_SDCR2_RPIPE_1                  ((uint32_t)0x00004000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_SDTR1 register  ******************/
+#define  FMC_SDTR1_TMRD                     ((uint32_t)0x0000000F)        /*!<TMRD[3:0] bits (Load mode register to active) */
+#define  FMC_SDTR1_TMRD_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDTR1_TMRD_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_SDTR1_TMRD_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_SDTR1_TMRD_3                   ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_SDTR1_TXSR                     ((uint32_t)0x000000F0)        /*!<TXSR[3:0] bits (Exit self refresh) */
+#define  FMC_SDTR1_TXSR_0                   ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_SDTR1_TXSR_1                   ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_SDTR1_TXSR_2                   ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_SDTR1_TXSR_3                   ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_SDTR1_TRAS                     ((uint32_t)0x00000F00)        /*!<TRAS[3:0] bits (Self refresh time) */
+#define  FMC_SDTR1_TRAS_0                   ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_SDTR1_TRAS_1                   ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_SDTR1_TRAS_2                   ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_SDTR1_TRAS_3                   ((uint32_t)0x00000800)        /*!<Bit 3 */
+
+#define  FMC_SDTR1_TRC                      ((uint32_t)0x0000F000)        /*!<TRC[2:0] bits (Row cycle delay) */
+#define  FMC_SDTR1_TRC_0                    ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  FMC_SDTR1_TRC_1                    ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  FMC_SDTR1_TRC_2                    ((uint32_t)0x00004000)        /*!<Bit 2 */
+
+#define  FMC_SDTR1_TWR                      ((uint32_t)0x000F0000)        /*!<TRC[2:0] bits (Write recovery delay) */
+#define  FMC_SDTR1_TWR_0                    ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_SDTR1_TWR_1                    ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_SDTR1_TWR_2                    ((uint32_t)0x00040000)        /*!<Bit 2 */
+
+#define  FMC_SDTR1_TRP                      ((uint32_t)0x00F00000)        /*!<TRP[2:0] bits (Row precharge delay) */
+#define  FMC_SDTR1_TRP_0                    ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_SDTR1_TRP_1                    ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_SDTR1_TRP_2                    ((uint32_t)0x00400000)        /*!<Bit 2 */
+
+#define  FMC_SDTR1_TRCD                     ((uint32_t)0x0F000000)        /*!<TRP[2:0] bits (Row to column delay) */
+#define  FMC_SDTR1_TRCD_0                   ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_SDTR1_TRCD_1                   ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_SDTR1_TRCD_2                   ((uint32_t)0x04000000)        /*!<Bit 2 */
+
+/******************  Bit definition for FMC_SDTR2 register  ******************/
+#define  FMC_SDTR2_TMRD                     ((uint32_t)0x0000000F)        /*!<TMRD[3:0] bits (Load mode register to active) */
+#define  FMC_SDTR2_TMRD_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDTR2_TMRD_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_SDTR2_TMRD_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_SDTR2_TMRD_3                   ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_SDTR2_TXSR                     ((uint32_t)0x000000F0)        /*!<TXSR[3:0] bits (Exit self refresh) */
+#define  FMC_SDTR2_TXSR_0                   ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_SDTR2_TXSR_1                   ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_SDTR2_TXSR_2                   ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_SDTR2_TXSR_3                   ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_SDTR2_TRAS                     ((uint32_t)0x00000F00)        /*!<TRAS[3:0] bits (Self refresh time) */
+#define  FMC_SDTR2_TRAS_0                   ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_SDTR2_TRAS_1                   ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_SDTR2_TRAS_2                   ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_SDTR2_TRAS_3                   ((uint32_t)0x00000800)        /*!<Bit 3 */
+
+#define  FMC_SDTR2_TRC                      ((uint32_t)0x0000F000)        /*!<TRC[2:0] bits (Row cycle delay) */
+#define  FMC_SDTR2_TRC_0                    ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  FMC_SDTR2_TRC_1                    ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  FMC_SDTR2_TRC_2                    ((uint32_t)0x00004000)        /*!<Bit 2 */
+
+#define  FMC_SDTR2_TWR                      ((uint32_t)0x000F0000)        /*!<TRC[2:0] bits (Write recovery delay) */
+#define  FMC_SDTR2_TWR_0                    ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_SDTR2_TWR_1                    ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_SDTR2_TWR_2                    ((uint32_t)0x00040000)        /*!<Bit 2 */
+
+#define  FMC_SDTR2_TRP                      ((uint32_t)0x00F00000)        /*!<TRP[2:0] bits (Row precharge delay) */
+#define  FMC_SDTR2_TRP_0                    ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_SDTR2_TRP_1                    ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_SDTR2_TRP_2                    ((uint32_t)0x00400000)        /*!<Bit 2 */
+
+#define  FMC_SDTR2_TRCD                     ((uint32_t)0x0F000000)        /*!<TRP[2:0] bits (Row to column delay) */
+#define  FMC_SDTR2_TRCD_0                   ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_SDTR2_TRCD_1                   ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_SDTR2_TRCD_2                   ((uint32_t)0x04000000)        /*!<Bit 2 */
+
+/******************  Bit definition for FMC_SDCMR register  ******************/
+#define  FMC_SDCMR_MODE                     ((uint32_t)0x00000007)        /*!<MODE[2:0] bits (Command mode) */
+#define  FMC_SDCMR_MODE_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDCMR_MODE_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_SDCMR_MODE_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+
+#define  FMC_SDCMR_CTB2                     ((uint32_t)0x00000008)        /*!<Command target 2 */
+
+#define  FMC_SDCMR_CTB1                     ((uint32_t)0x00000010)        /*!<Command target 1 */
+
+#define  FMC_SDCMR_NRFS                     ((uint32_t)0x000001E0)        /*!<NRFS[3:0] bits (Number of auto-refresh) */
+#define  FMC_SDCMR_NRFS_0                   ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  FMC_SDCMR_NRFS_1                   ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  FMC_SDCMR_NRFS_2                   ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  FMC_SDCMR_NRFS_3                   ((uint32_t)0x00000100)        /*!<Bit 3 */
+
+#define  FMC_SDCMR_MRD                      ((uint32_t)0x003FFE00)        /*!<MRD[12:0] bits (Mode register definition) */
+
+/******************  Bit definition for FMC_SDRTR register  ******************/
+#define  FMC_SDRTR_CRE                      ((uint32_t)0x00000001)        /*!<Clear refresh error flag */
+
+#define  FMC_SDRTR_COUNT                    ((uint32_t)0x00003FFE)        /*!<COUNT[12:0] bits (Refresh timer count) */
+
+#define  FMC_SDRTR_REIE                     ((uint32_t)0x00004000)        /*!<RES interupt enable */
+
+/******************  Bit definition for FMC_SDSR register  ******************/
+#define  FMC_SDSR_RE                        ((uint32_t)0x00000001)        /*!<Refresh error flag */
+
+#define  FMC_SDSR_MODES1                    ((uint32_t)0x00000006)        /*!<MODES1[1:0]bits (Status mode for bank 1) */
+#define  FMC_SDSR_MODES1_0                  ((uint32_t)0x00000002)        /*!<Bit 0 */
+#define  FMC_SDSR_MODES1_1                  ((uint32_t)0x00000004)        /*!<Bit 1 */
+
+#define  FMC_SDSR_MODES2                    ((uint32_t)0x00000018)        /*!<MODES2[1:0]bits (Status mode for bank 2) */
+#define  FMC_SDSR_MODES2_0                  ((uint32_t)0x00000008)        /*!<Bit 0 */
+#define  FMC_SDSR_MODES2_1                  ((uint32_t)0x00000010)        /*!<Bit 1 */
+#define  FMC_SDSR_BUSY                      ((uint32_t)0x00000020)        /*!<Busy status */
+
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                            General Purpose I/O                             */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bits definition for GPIO_MODER register  *****************/
+#define GPIO_MODER_MODER0                    ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0                  ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1                  ((uint32_t)0x00000002)
+
+#define GPIO_MODER_MODER1                    ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0                  ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1                  ((uint32_t)0x00000008)
+
+#define GPIO_MODER_MODER2                    ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0                  ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1                  ((uint32_t)0x00000020)
+
+#define GPIO_MODER_MODER3                    ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0                  ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1                  ((uint32_t)0x00000080)
+
+#define GPIO_MODER_MODER4                    ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0                  ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1                  ((uint32_t)0x00000200)
+
+#define GPIO_MODER_MODER5                    ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0                  ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1                  ((uint32_t)0x00000800)
+
+#define GPIO_MODER_MODER6                    ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0                  ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1                  ((uint32_t)0x00002000)
+
+#define GPIO_MODER_MODER7                    ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0                  ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1                  ((uint32_t)0x00008000)
+
+#define GPIO_MODER_MODER8                    ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0                  ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1                  ((uint32_t)0x00020000)
+
+#define GPIO_MODER_MODER9                    ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0                  ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1                  ((uint32_t)0x00080000)
+
+#define GPIO_MODER_MODER10                   ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0                 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1                 ((uint32_t)0x00200000)
+
+#define GPIO_MODER_MODER11                   ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0                 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1                 ((uint32_t)0x00800000)
+
+#define GPIO_MODER_MODER12                   ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0                 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1                 ((uint32_t)0x02000000)
+
+#define GPIO_MODER_MODER13                   ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0                 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1                 ((uint32_t)0x08000000)
+
+#define GPIO_MODER_MODER14                   ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0                 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1                 ((uint32_t)0x20000000)
+
+#define GPIO_MODER_MODER15                   ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0                 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1                 ((uint32_t)0x80000000)
+
+/******************  Bits definition for GPIO_OTYPER register  ****************/
+#define GPIO_OTYPER_OT_0                     ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1                     ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2                     ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3                     ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4                     ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5                     ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6                     ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7                     ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8                     ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9                     ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10                    ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11                    ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12                    ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13                    ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14                    ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15                    ((uint32_t)0x00008000)
+
+/******************  Bits definition for GPIO_OSPEEDR register  ***************/
+#define GPIO_OSPEEDER_OSPEEDR0               ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0             ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1             ((uint32_t)0x00000002)
+
+#define GPIO_OSPEEDER_OSPEEDR1               ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0             ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1             ((uint32_t)0x00000008)
+
+#define GPIO_OSPEEDER_OSPEEDR2               ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0             ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1             ((uint32_t)0x00000020)
+
+#define GPIO_OSPEEDER_OSPEEDR3               ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0             ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1             ((uint32_t)0x00000080)
+
+#define GPIO_OSPEEDER_OSPEEDR4               ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0             ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1             ((uint32_t)0x00000200)
+
+#define GPIO_OSPEEDER_OSPEEDR5               ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0             ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1             ((uint32_t)0x00000800)
+
+#define GPIO_OSPEEDER_OSPEEDR6               ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0             ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1             ((uint32_t)0x00002000)
+
+#define GPIO_OSPEEDER_OSPEEDR7               ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0             ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1             ((uint32_t)0x00008000)
+
+#define GPIO_OSPEEDER_OSPEEDR8               ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0             ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1             ((uint32_t)0x00020000)
+
+#define GPIO_OSPEEDER_OSPEEDR9               ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0             ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1             ((uint32_t)0x00080000)
+
+#define GPIO_OSPEEDER_OSPEEDR10              ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0            ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1            ((uint32_t)0x00200000)
+
+#define GPIO_OSPEEDER_OSPEEDR11              ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0            ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1            ((uint32_t)0x00800000)
+
+#define GPIO_OSPEEDER_OSPEEDR12              ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0            ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1            ((uint32_t)0x02000000)
+
+#define GPIO_OSPEEDER_OSPEEDR13              ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0            ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1            ((uint32_t)0x08000000)
+
+#define GPIO_OSPEEDER_OSPEEDR14              ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0            ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1            ((uint32_t)0x20000000)
+
+#define GPIO_OSPEEDER_OSPEEDR15              ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0            ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1            ((uint32_t)0x80000000)
+
+/******************  Bits definition for GPIO_PUPDR register  *****************/
+#define GPIO_PUPDR_PUPDR0                    ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0                  ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1                  ((uint32_t)0x00000002)
+
+#define GPIO_PUPDR_PUPDR1                    ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0                  ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1                  ((uint32_t)0x00000008)
+
+#define GPIO_PUPDR_PUPDR2                    ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0                  ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1                  ((uint32_t)0x00000020)
+
+#define GPIO_PUPDR_PUPDR3                    ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0                  ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1                  ((uint32_t)0x00000080)
+
+#define GPIO_PUPDR_PUPDR4                    ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0                  ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1                  ((uint32_t)0x00000200)
+
+#define GPIO_PUPDR_PUPDR5                    ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0                  ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1                  ((uint32_t)0x00000800)
+
+#define GPIO_PUPDR_PUPDR6                    ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0                  ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1                  ((uint32_t)0x00002000)
+
+#define GPIO_PUPDR_PUPDR7                    ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0                  ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1                  ((uint32_t)0x00008000)
+
+#define GPIO_PUPDR_PUPDR8                    ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0                  ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1                  ((uint32_t)0x00020000)
+
+#define GPIO_PUPDR_PUPDR9                    ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0                  ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1                  ((uint32_t)0x00080000)
+
+#define GPIO_PUPDR_PUPDR10                   ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0                 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1                 ((uint32_t)0x00200000)
+
+#define GPIO_PUPDR_PUPDR11                   ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0                 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1                 ((uint32_t)0x00800000)
+
+#define GPIO_PUPDR_PUPDR12                   ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0                 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1                 ((uint32_t)0x02000000)
+
+#define GPIO_PUPDR_PUPDR13                   ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0                 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1                 ((uint32_t)0x08000000)
+
+#define GPIO_PUPDR_PUPDR14                   ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0                 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1                 ((uint32_t)0x20000000)
+
+#define GPIO_PUPDR_PUPDR15                   ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0                 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1                 ((uint32_t)0x80000000)
+
+/******************  Bits definition for GPIO_IDR register  *******************/
+#define GPIO_IDR_IDR_0                       ((uint32_t)0x00000001)
+#define GPIO_IDR_IDR_1                       ((uint32_t)0x00000002)
+#define GPIO_IDR_IDR_2                       ((uint32_t)0x00000004)
+#define GPIO_IDR_IDR_3                       ((uint32_t)0x00000008)
+#define GPIO_IDR_IDR_4                       ((uint32_t)0x00000010)
+#define GPIO_IDR_IDR_5                       ((uint32_t)0x00000020)
+#define GPIO_IDR_IDR_6                       ((uint32_t)0x00000040)
+#define GPIO_IDR_IDR_7                       ((uint32_t)0x00000080)
+#define GPIO_IDR_IDR_8                       ((uint32_t)0x00000100)
+#define GPIO_IDR_IDR_9                       ((uint32_t)0x00000200)
+#define GPIO_IDR_IDR_10                      ((uint32_t)0x00000400)
+#define GPIO_IDR_IDR_11                      ((uint32_t)0x00000800)
+#define GPIO_IDR_IDR_12                      ((uint32_t)0x00001000)
+#define GPIO_IDR_IDR_13                      ((uint32_t)0x00002000)
+#define GPIO_IDR_IDR_14                      ((uint32_t)0x00004000)
+#define GPIO_IDR_IDR_15                      ((uint32_t)0x00008000)
+/* Old GPIO_IDR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_IDR_0                    GPIO_IDR_IDR_0
+#define GPIO_OTYPER_IDR_1                    GPIO_IDR_IDR_1
+#define GPIO_OTYPER_IDR_2                    GPIO_IDR_IDR_2
+#define GPIO_OTYPER_IDR_3                    GPIO_IDR_IDR_3
+#define GPIO_OTYPER_IDR_4                    GPIO_IDR_IDR_4
+#define GPIO_OTYPER_IDR_5                    GPIO_IDR_IDR_5
+#define GPIO_OTYPER_IDR_6                    GPIO_IDR_IDR_6
+#define GPIO_OTYPER_IDR_7                    GPIO_IDR_IDR_7
+#define GPIO_OTYPER_IDR_8                    GPIO_IDR_IDR_8
+#define GPIO_OTYPER_IDR_9                    GPIO_IDR_IDR_9
+#define GPIO_OTYPER_IDR_10                   GPIO_IDR_IDR_10
+#define GPIO_OTYPER_IDR_11                   GPIO_IDR_IDR_11
+#define GPIO_OTYPER_IDR_12                   GPIO_IDR_IDR_12
+#define GPIO_OTYPER_IDR_13                   GPIO_IDR_IDR_13
+#define GPIO_OTYPER_IDR_14                   GPIO_IDR_IDR_14
+#define GPIO_OTYPER_IDR_15                   GPIO_IDR_IDR_15
+
+/******************  Bits definition for GPIO_ODR register  *******************/
+#define GPIO_ODR_ODR_0                       ((uint32_t)0x00000001)
+#define GPIO_ODR_ODR_1                       ((uint32_t)0x00000002)
+#define GPIO_ODR_ODR_2                       ((uint32_t)0x00000004)
+#define GPIO_ODR_ODR_3                       ((uint32_t)0x00000008)
+#define GPIO_ODR_ODR_4                       ((uint32_t)0x00000010)
+#define GPIO_ODR_ODR_5                       ((uint32_t)0x00000020)
+#define GPIO_ODR_ODR_6                       ((uint32_t)0x00000040)
+#define GPIO_ODR_ODR_7                       ((uint32_t)0x00000080)
+#define GPIO_ODR_ODR_8                       ((uint32_t)0x00000100)
+#define GPIO_ODR_ODR_9                       ((uint32_t)0x00000200)
+#define GPIO_ODR_ODR_10                      ((uint32_t)0x00000400)
+#define GPIO_ODR_ODR_11                      ((uint32_t)0x00000800)
+#define GPIO_ODR_ODR_12                      ((uint32_t)0x00001000)
+#define GPIO_ODR_ODR_13                      ((uint32_t)0x00002000)
+#define GPIO_ODR_ODR_14                      ((uint32_t)0x00004000)
+#define GPIO_ODR_ODR_15                      ((uint32_t)0x00008000)
+/* Old GPIO_ODR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_ODR_0                    GPIO_ODR_ODR_0
+#define GPIO_OTYPER_ODR_1                    GPIO_ODR_ODR_1
+#define GPIO_OTYPER_ODR_2                    GPIO_ODR_ODR_2
+#define GPIO_OTYPER_ODR_3                    GPIO_ODR_ODR_3
+#define GPIO_OTYPER_ODR_4                    GPIO_ODR_ODR_4
+#define GPIO_OTYPER_ODR_5                    GPIO_ODR_ODR_5
+#define GPIO_OTYPER_ODR_6                    GPIO_ODR_ODR_6
+#define GPIO_OTYPER_ODR_7                    GPIO_ODR_ODR_7
+#define GPIO_OTYPER_ODR_8                    GPIO_ODR_ODR_8
+#define GPIO_OTYPER_ODR_9                    GPIO_ODR_ODR_9
+#define GPIO_OTYPER_ODR_10                   GPIO_ODR_ODR_10
+#define GPIO_OTYPER_ODR_11                   GPIO_ODR_ODR_11
+#define GPIO_OTYPER_ODR_12                   GPIO_ODR_ODR_12
+#define GPIO_OTYPER_ODR_13                   GPIO_ODR_ODR_13
+#define GPIO_OTYPER_ODR_14                   GPIO_ODR_ODR_14
+#define GPIO_OTYPER_ODR_15                   GPIO_ODR_ODR_15
+
+/******************  Bits definition for GPIO_BSRR register  ******************/
+#define GPIO_BSRR_BS_0                       ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1                       ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2                       ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3                       ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4                       ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5                       ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6                       ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7                       ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8                       ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9                       ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10                      ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11                      ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12                      ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13                      ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14                      ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15                      ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0                       ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1                       ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2                       ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3                       ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4                       ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5                       ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6                       ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7                       ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8                       ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9                       ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10                      ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11                      ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12                      ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13                      ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14                      ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15                      ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register *********************/
+#define GPIO_LCKR_LCK0                       ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1                       ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2                       ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3                       ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4                       ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5                       ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6                       ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7                       ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8                       ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9                       ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10                      ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11                      ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12                      ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13                      ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14                      ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15                      ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK                       ((uint32_t)0x00010000)
+
+/******************************************************************************/
+/*                                                                            */
+/*                      Inter-integrated Circuit Interface                    */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for I2C_CR1 register  ********************/
+#define  I2C_CR1_PE                          ((uint32_t)0x00000001)     /*!<Peripheral Enable                             */
+#define  I2C_CR1_SMBUS                       ((uint32_t)0x00000002)     /*!<SMBus Mode                                    */
+#define  I2C_CR1_SMBTYPE                     ((uint32_t)0x00000008)     /*!<SMBus Type                                    */
+#define  I2C_CR1_ENARP                       ((uint32_t)0x00000010)     /*!<ARP Enable                                    */
+#define  I2C_CR1_ENPEC                       ((uint32_t)0x00000020)     /*!<PEC Enable                                    */
+#define  I2C_CR1_ENGC                        ((uint32_t)0x00000040)     /*!<General Call Enable                           */
+#define  I2C_CR1_NOSTRETCH                   ((uint32_t)0x00000080)     /*!<Clock Stretching Disable (Slave mode)  */
+#define  I2C_CR1_START                       ((uint32_t)0x00000100)     /*!<Start Generation                              */
+#define  I2C_CR1_STOP                        ((uint32_t)0x00000200)     /*!<Stop Generation                               */
+#define  I2C_CR1_ACK                         ((uint32_t)0x00000400)     /*!<Acknowledge Enable                            */
+#define  I2C_CR1_POS                         ((uint32_t)0x00000800)     /*!<Acknowledge/PEC Position (for data reception) */
+#define  I2C_CR1_PEC                         ((uint32_t)0x00001000)     /*!<Packet Error Checking                         */
+#define  I2C_CR1_ALERT                       ((uint32_t)0x00002000)     /*!<SMBus Alert                                   */
+#define  I2C_CR1_SWRST                       ((uint32_t)0x00008000)     /*!<Software Reset                                */
+
+/*******************  Bit definition for I2C_CR2 register  ********************/
+#define  I2C_CR2_FREQ                        ((uint32_t)0x0000003F)     /*!<FREQ[5:0] bits (Peripheral Clock Frequency)   */
+#define  I2C_CR2_FREQ_0                      ((uint32_t)0x00000001)     /*!<Bit 0 */
+#define  I2C_CR2_FREQ_1                      ((uint32_t)0x00000002)     /*!<Bit 1 */
+#define  I2C_CR2_FREQ_2                      ((uint32_t)0x00000004)     /*!<Bit 2 */
+#define  I2C_CR2_FREQ_3                      ((uint32_t)0x00000008)     /*!<Bit 3 */
+#define  I2C_CR2_FREQ_4                      ((uint32_t)0x00000010)     /*!<Bit 4 */
+#define  I2C_CR2_FREQ_5                      ((uint32_t)0x00000020)     /*!<Bit 5 */
+
+#define  I2C_CR2_ITERREN                     ((uint32_t)0x00000100)     /*!<Error Interrupt Enable  */
+#define  I2C_CR2_ITEVTEN                     ((uint32_t)0x00000200)     /*!<Event Interrupt Enable  */
+#define  I2C_CR2_ITBUFEN                     ((uint32_t)0x00000400)     /*!<Buffer Interrupt Enable */
+#define  I2C_CR2_DMAEN                       ((uint32_t)0x00000800)     /*!<DMA Requests Enable     */
+#define  I2C_CR2_LAST                        ((uint32_t)0x00001000)     /*!<DMA Last Transfer       */
+
+/*******************  Bit definition for I2C_OAR1 register  *******************/
+#define  I2C_OAR1_ADD1_7                     ((uint32_t)0x000000FE)     /*!<Interface Address */
+#define  I2C_OAR1_ADD8_9                     ((uint32_t)0x00000300)     /*!<Interface Address */
+
+#define  I2C_OAR1_ADD0                       ((uint32_t)0x00000001)     /*!<Bit 0 */
+#define  I2C_OAR1_ADD1                       ((uint32_t)0x00000002)     /*!<Bit 1 */
+#define  I2C_OAR1_ADD2                       ((uint32_t)0x00000004)     /*!<Bit 2 */
+#define  I2C_OAR1_ADD3                       ((uint32_t)0x00000008)     /*!<Bit 3 */
+#define  I2C_OAR1_ADD4                       ((uint32_t)0x00000010)     /*!<Bit 4 */
+#define  I2C_OAR1_ADD5                       ((uint32_t)0x00000020)     /*!<Bit 5 */
+#define  I2C_OAR1_ADD6                       ((uint32_t)0x00000040)     /*!<Bit 6 */
+#define  I2C_OAR1_ADD7                       ((uint32_t)0x00000080)     /*!<Bit 7 */
+#define  I2C_OAR1_ADD8                       ((uint32_t)0x00000100)     /*!<Bit 8 */
+#define  I2C_OAR1_ADD9                       ((uint32_t)0x00000200)     /*!<Bit 9 */
+
+#define  I2C_OAR1_ADDMODE                    ((uint32_t)0x00008000)     /*!<Addressing Mode (Slave mode) */
+
+/*******************  Bit definition for I2C_OAR2 register  *******************/
+#define  I2C_OAR2_ENDUAL                     ((uint32_t)0x00000001)        /*!<Dual addressing mode enable */
+#define  I2C_OAR2_ADD2                       ((uint32_t)0x000000FE)        /*!<Interface address           */
+
+/********************  Bit definition for I2C_DR register  ********************/
+#define  I2C_DR_DR                           ((uint32_t)0x000000FF)        /*!<8-bit Data Register         */
+
+/*******************  Bit definition for I2C_SR1 register  ********************/
+#define  I2C_SR1_SB                          ((uint32_t)0x00000001)     /*!<Start Bit (Master mode)                  */
+#define  I2C_SR1_ADDR                        ((uint32_t)0x00000002)     /*!<Address sent (master mode)/matched (slave mode) */
+#define  I2C_SR1_BTF                         ((uint32_t)0x00000004)     /*!<Byte Transfer Finished                          */
+#define  I2C_SR1_ADD10                       ((uint32_t)0x00000008)     /*!<10-bit header sent (Master mode)         */
+#define  I2C_SR1_STOPF                       ((uint32_t)0x00000010)     /*!<Stop detection (Slave mode)              */
+#define  I2C_SR1_RXNE                        ((uint32_t)0x00000040)     /*!<Data Register not Empty (receivers)      */
+#define  I2C_SR1_TXE                         ((uint32_t)0x00000080)     /*!<Data Register Empty (transmitters)       */
+#define  I2C_SR1_BERR                        ((uint32_t)0x00000100)     /*!<Bus Error                                       */
+#define  I2C_SR1_ARLO                        ((uint32_t)0x00000200)     /*!<Arbitration Lost (master mode)           */
+#define  I2C_SR1_AF                          ((uint32_t)0x00000400)     /*!<Acknowledge Failure                             */
+#define  I2C_SR1_OVR                         ((uint32_t)0x00000800)     /*!<Overrun/Underrun                                */
+#define  I2C_SR1_PECERR                      ((uint32_t)0x00001000)     /*!<PEC Error in reception                          */
+#define  I2C_SR1_TIMEOUT                     ((uint32_t)0x00004000)     /*!<Timeout or Tlow Error                           */
+#define  I2C_SR1_SMBALERT                    ((uint32_t)0x00008000)     /*!<SMBus Alert                                     */
+
+/*******************  Bit definition for I2C_SR2 register  ********************/
+#define  I2C_SR2_MSL                         ((uint32_t)0x00000001)     /*!<Master/Slave                              */
+#define  I2C_SR2_BUSY                        ((uint32_t)0x00000002)     /*!<Bus Busy                                  */
+#define  I2C_SR2_TRA                         ((uint32_t)0x00000004)     /*!<Transmitter/Receiver                      */
+#define  I2C_SR2_GENCALL                     ((uint32_t)0x00000010)     /*!<General Call Address (Slave mode)  */
+#define  I2C_SR2_SMBDEFAULT                  ((uint32_t)0x00000020)     /*!<SMBus Device Default Address (Slave mode) */
+#define  I2C_SR2_SMBHOST                     ((uint32_t)0x00000040)     /*!<SMBus Host Header (Slave mode)     */
+#define  I2C_SR2_DUALF                       ((uint32_t)0x00000080)     /*!<Dual Flag (Slave mode)             */
+#define  I2C_SR2_PEC                         ((uint32_t)0x0000FF00)     /*!<Packet Error Checking Register            */
+
+/*******************  Bit definition for I2C_CCR register  ********************/
+#define  I2C_CCR_CCR                         ((uint32_t)0x00000FFF)     /*!<Clock Control Register in Fast/Standard mode (Master mode) */
+#define  I2C_CCR_DUTY                        ((uint32_t)0x00004000)     /*!<Fast Mode Duty Cycle                                       */
+#define  I2C_CCR_FS                          ((uint32_t)0x00008000)     /*!<I2C Master Mode Selection                                  */
+
+/******************  Bit definition for I2C_TRISE register  *******************/
+#define  I2C_TRISE_TRISE                     ((uint32_t)0x0000003F)     /*!<Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/******************  Bit definition for I2C_FLTR register  *******************/
+#define  I2C_FLTR_DNF                        ((uint32_t)0x0000000F)     /*!<Digital Noise Filter */
+#define  I2C_FLTR_ANOFF                      ((uint32_t)0x00000010)     /*!<Analog Noise Filter OFF */
+
+/******************************************************************************/
+/*                                                                            */
+/*                           Independent WATCHDOG                             */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for IWDG_KR register  ********************/
+#define  IWDG_KR_KEY                         ((uint32_t)0xFFFF)            /*!<Key value (write only, read 0000h)  */
+
+/*******************  Bit definition for IWDG_PR register  ********************/
+#define  IWDG_PR_PR                          ((uint32_t)0x07)               /*!<PR[2:0] (Prescaler divider)         */
+#define  IWDG_PR_PR_0                        ((uint32_t)0x01)               /*!<Bit 0 */
+#define  IWDG_PR_PR_1                        ((uint32_t)0x02)               /*!<Bit 1 */
+#define  IWDG_PR_PR_2                        ((uint32_t)0x04)               /*!<Bit 2 */
+
+/*******************  Bit definition for IWDG_RLR register  *******************/
+#define  IWDG_RLR_RL                         ((uint32_t)0x0FFF)            /*!<Watchdog counter reload value        */
+
+/*******************  Bit definition for IWDG_SR register  ********************/
+#define  IWDG_SR_PVU                         ((uint32_t)0x01)               /*!<Watchdog prescaler value update      */
+#define  IWDG_SR_RVU                         ((uint32_t)0x02)               /*!<Watchdog counter reload value update */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                      LCD-TFT Display Controller (LTDC)                     */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for LTDC_SSCR register  *****************/
+
+#define LTDC_SSCR_VSH                       ((uint32_t)0x000007FF)              /*!< Vertical Synchronization Height */
+#define LTDC_SSCR_HSW                       ((uint32_t)0x0FFF0000)              /*!< Horizontal Synchronization Width */
+
+/********************  Bit definition for LTDC_BPCR register  *****************/
+
+#define LTDC_BPCR_AVBP                      ((uint32_t)0x000007FF)              /*!< Accumulated Vertical Back Porch */
+#define LTDC_BPCR_AHBP                      ((uint32_t)0x0FFF0000)              /*!< Accumulated Horizontal Back Porch */
+
+/********************  Bit definition for LTDC_AWCR register  *****************/
+
+#define LTDC_AWCR_AAH                       ((uint32_t)0x000007FF)              /*!< Accumulated Active heigh */
+#define LTDC_AWCR_AAW                       ((uint32_t)0x0FFF0000)              /*!< Accumulated Active Width */
+
+/********************  Bit definition for LTDC_TWCR register  *****************/
+
+#define LTDC_TWCR_TOTALH                    ((uint32_t)0x000007FF)              /*!< Total Heigh */
+#define LTDC_TWCR_TOTALW                    ((uint32_t)0x0FFF0000)              /*!< Total Width */
+
+/********************  Bit definition for LTDC_GCR register  ******************/
+
+#define LTDC_GCR_LTDCEN                     ((uint32_t)0x00000001)              /*!< LCD-TFT controller enable bit */
+#define LTDC_GCR_DBW                        ((uint32_t)0x00000070)              /*!< Dither Blue Width */
+#define LTDC_GCR_DGW                        ((uint32_t)0x00000700)              /*!< Dither Green Width */
+#define LTDC_GCR_DRW                        ((uint32_t)0x00007000)              /*!< Dither Red Width */
+#define LTDC_GCR_DTEN                       ((uint32_t)0x00010000)              /*!< Dither Enable */
+#define LTDC_GCR_PCPOL                      ((uint32_t)0x10000000)              /*!< Pixel Clock Polarity */
+#define LTDC_GCR_DEPOL                      ((uint32_t)0x20000000)              /*!< Data Enable Polarity */
+#define LTDC_GCR_VSPOL                      ((uint32_t)0x40000000)              /*!< Vertical Synchronization Polarity */
+#define LTDC_GCR_HSPOL                      ((uint32_t)0x80000000)              /*!< Horizontal Synchronization Polarity */
+
+/********************  Bit definition for LTDC_SRCR register  *****************/
+
+#define LTDC_SRCR_IMR                      ((uint32_t)0x00000001)               /*!< Immediate Reload */
+#define LTDC_SRCR_VBR                      ((uint32_t)0x00000002)               /*!< Vertical Blanking Reload */
+
+/********************  Bit definition for LTDC_BCCR register  *****************/
+
+#define LTDC_BCCR_BCBLUE                    ((uint32_t)0x000000FF)              /*!< Background Blue value */
+#define LTDC_BCCR_BCGREEN                   ((uint32_t)0x0000FF00)              /*!< Background Green value */
+#define LTDC_BCCR_BCRED                     ((uint32_t)0x00FF0000)              /*!< Background Red value */
+
+/********************  Bit definition for LTDC_IER register  ******************/
+
+#define LTDC_IER_LIE                        ((uint32_t)0x00000001)              /*!< Line Interrupt Enable */
+#define LTDC_IER_FUIE                       ((uint32_t)0x00000002)              /*!< FIFO Underrun Interrupt Enable */
+#define LTDC_IER_TERRIE                     ((uint32_t)0x00000004)              /*!< Transfer Error Interrupt Enable */
+#define LTDC_IER_RRIE                       ((uint32_t)0x00000008)              /*!< Register Reload interrupt enable */
+
+/********************  Bit definition for LTDC_ISR register  ******************/
+
+#define LTDC_ISR_LIF                        ((uint32_t)0x00000001)              /*!< Line Interrupt Flag */
+#define LTDC_ISR_FUIF                       ((uint32_t)0x00000002)              /*!< FIFO Underrun Interrupt Flag */
+#define LTDC_ISR_TERRIF                     ((uint32_t)0x00000004)              /*!< Transfer Error Interrupt Flag */
+#define LTDC_ISR_RRIF                       ((uint32_t)0x00000008)              /*!< Register Reload interrupt Flag */
+
+/********************  Bit definition for LTDC_ICR register  ******************/
+
+#define LTDC_ICR_CLIF                       ((uint32_t)0x00000001)              /*!< Clears the Line Interrupt Flag */
+#define LTDC_ICR_CFUIF                      ((uint32_t)0x00000002)              /*!< Clears the FIFO Underrun Interrupt Flag */
+#define LTDC_ICR_CTERRIF                    ((uint32_t)0x00000004)              /*!< Clears the Transfer Error Interrupt Flag */
+#define LTDC_ICR_CRRIF                      ((uint32_t)0x00000008)              /*!< Clears Register Reload interrupt Flag */
+
+/********************  Bit definition for LTDC_LIPCR register  ****************/
+
+#define LTDC_LIPCR_LIPOS                    ((uint32_t)0x000007FF)              /*!< Line Interrupt Position */
+
+/********************  Bit definition for LTDC_CPSR register  *****************/
+
+#define LTDC_CPSR_CYPOS                     ((uint32_t)0x0000FFFF)              /*!< Current Y Position */
+#define LTDC_CPSR_CXPOS                     ((uint32_t)0xFFFF0000)              /*!< Current X Position */
+
+/********************  Bit definition for LTDC_CDSR register  *****************/
+
+#define LTDC_CDSR_VDES                      ((uint32_t)0x00000001)              /*!< Vertical Data Enable Status */
+#define LTDC_CDSR_HDES                      ((uint32_t)0x00000002)              /*!< Horizontal Data Enable Status */
+#define LTDC_CDSR_VSYNCS                    ((uint32_t)0x00000004)              /*!< Vertical Synchronization Status */
+#define LTDC_CDSR_HSYNCS                    ((uint32_t)0x00000008)              /*!< Horizontal Synchronization Status */
+
+/********************  Bit definition for LTDC_LxCR register  *****************/
+
+#define LTDC_LxCR_LEN                       ((uint32_t)0x00000001)              /*!< Layer Enable */
+#define LTDC_LxCR_COLKEN                    ((uint32_t)0x00000002)              /*!< Color Keying Enable */
+#define LTDC_LxCR_CLUTEN                    ((uint32_t)0x00000010)              /*!< Color Lockup Table Enable */
+
+/********************  Bit definition for LTDC_LxWHPCR register  **************/
+
+#define LTDC_LxWHPCR_WHSTPOS                ((uint32_t)0x00000FFF)              /*!< Window Horizontal Start Position */
+#define LTDC_LxWHPCR_WHSPPOS                ((uint32_t)0xFFFF0000)              /*!< Window Horizontal Stop Position */
+
+/********************  Bit definition for LTDC_LxWVPCR register  **************/
+
+#define LTDC_LxWVPCR_WVSTPOS                ((uint32_t)0x00000FFF)              /*!< Window Vertical Start Position */
+#define LTDC_LxWVPCR_WVSPPOS                ((uint32_t)0xFFFF0000)              /*!< Window Vertical Stop Position */
+
+/********************  Bit definition for LTDC_LxCKCR register  ***************/
+
+#define LTDC_LxCKCR_CKBLUE                  ((uint32_t)0x000000FF)              /*!< Color Key Blue value */
+#define LTDC_LxCKCR_CKGREEN                 ((uint32_t)0x0000FF00)              /*!< Color Key Green value */
+#define LTDC_LxCKCR_CKRED                   ((uint32_t)0x00FF0000)              /*!< Color Key Red value */
+
+/********************  Bit definition for LTDC_LxPFCR register  ***************/
+
+#define LTDC_LxPFCR_PF                      ((uint32_t)0x00000007)              /*!< Pixel Format */
+
+/********************  Bit definition for LTDC_LxCACR register  ***************/
+
+#define LTDC_LxCACR_CONSTA                  ((uint32_t)0x000000FF)              /*!< Constant Alpha */
+
+/********************  Bit definition for LTDC_LxDCCR register  ***************/
+
+#define LTDC_LxDCCR_DCBLUE                  ((uint32_t)0x000000FF)              /*!< Default Color Blue */
+#define LTDC_LxDCCR_DCGREEN                 ((uint32_t)0x0000FF00)              /*!< Default Color Green */
+#define LTDC_LxDCCR_DCRED                   ((uint32_t)0x00FF0000)              /*!< Default Color Red */
+#define LTDC_LxDCCR_DCALPHA                 ((uint32_t)0xFF000000)              /*!< Default Color Alpha */
+
+/********************  Bit definition for LTDC_LxBFCR register  ***************/
+
+#define LTDC_LxBFCR_BF2                     ((uint32_t)0x00000007)              /*!< Blending Factor 2 */
+#define LTDC_LxBFCR_BF1                     ((uint32_t)0x00000700)              /*!< Blending Factor 1 */
+
+/********************  Bit definition for LTDC_LxCFBAR register  **************/
+
+#define LTDC_LxCFBAR_CFBADD                 ((uint32_t)0xFFFFFFFF)              /*!< Color Frame Buffer Start Address */
+
+/********************  Bit definition for LTDC_LxCFBLR register  **************/
+
+#define LTDC_LxCFBLR_CFBLL                  ((uint32_t)0x00001FFF)              /*!< Color Frame Buffer Line Length */
+#define LTDC_LxCFBLR_CFBP                   ((uint32_t)0x1FFF0000)              /*!< Color Frame Buffer Pitch in bytes */
+
+/********************  Bit definition for LTDC_LxCFBLNR register  *************/
+
+#define LTDC_LxCFBLNR_CFBLNBR               ((uint32_t)0x000007FF)              /*!< Frame Buffer Line Number */
+
+/********************  Bit definition for LTDC_LxCLUTWR register  *************/
+
+#define LTDC_LxCLUTWR_BLUE                  ((uint32_t)0x000000FF)              /*!< Blue value */
+#define LTDC_LxCLUTWR_GREEN                 ((uint32_t)0x0000FF00)              /*!< Green value */
+#define LTDC_LxCLUTWR_RED                   ((uint32_t)0x00FF0000)              /*!< Red value */
+#define LTDC_LxCLUTWR_CLUTADD               ((uint32_t)0xFF000000)              /*!< CLUT address */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                             Power Control                                  */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for PWR_CR register  ********************/
+#define  PWR_CR_LPDS                         ((uint32_t)0x00000001)     /*!< Low-Power Deepsleep                 */
+#define  PWR_CR_PDDS                         ((uint32_t)0x00000002)     /*!< Power Down Deepsleep                */
+#define  PWR_CR_CWUF                         ((uint32_t)0x00000004)     /*!< Clear Wakeup Flag                   */
+#define  PWR_CR_CSBF                         ((uint32_t)0x00000008)     /*!< Clear Standby Flag                  */
+#define  PWR_CR_PVDE                         ((uint32_t)0x00000010)     /*!< Power Voltage Detector Enable       */
+
+#define  PWR_CR_PLS                          ((uint32_t)0x000000E0)     /*!< PLS[2:0] bits (PVD Level Selection) */
+#define  PWR_CR_PLS_0                        ((uint32_t)0x00000020)     /*!< Bit 0 */
+#define  PWR_CR_PLS_1                        ((uint32_t)0x00000040)     /*!< Bit 1 */
+#define  PWR_CR_PLS_2                        ((uint32_t)0x00000080)     /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define  PWR_CR_PLS_LEV0                     ((uint32_t)0x00000000)     /*!< PVD level 0 */
+#define  PWR_CR_PLS_LEV1                     ((uint32_t)0x00000020)     /*!< PVD level 1 */
+#define  PWR_CR_PLS_LEV2                     ((uint32_t)0x00000040)     /*!< PVD level 2 */
+#define  PWR_CR_PLS_LEV3                     ((uint32_t)0x00000060)     /*!< PVD level 3 */
+#define  PWR_CR_PLS_LEV4                     ((uint32_t)0x00000080)     /*!< PVD level 4 */
+#define  PWR_CR_PLS_LEV5                     ((uint32_t)0x000000A0)     /*!< PVD level 5 */
+#define  PWR_CR_PLS_LEV6                     ((uint32_t)0x000000C0)     /*!< PVD level 6 */
+#define  PWR_CR_PLS_LEV7                     ((uint32_t)0x000000E0)     /*!< PVD level 7 */
+#define  PWR_CR_DBP                          ((uint32_t)0x00000100)     /*!< Disable Backup Domain write protection                     */
+#define  PWR_CR_FPDS                         ((uint32_t)0x00000200)     /*!< Flash power down in Stop mode                              */
+#define  PWR_CR_LPLVDS                       ((uint32_t)0x00000400)     /*!< Low-Power Regulator Low Voltage Scaling in Stop mode       */
+#define  PWR_CR_MRLVDS                       ((uint32_t)0x00000800)     /*!< Main regulator Low Voltage Scaling in Stop mode            */
+#define  PWR_CR_ADCDC1                       ((uint32_t)0x00002000)     /*!< Refer to AN4073 on how to use this bit */
+#define  PWR_CR_VOS                          ((uint32_t)0x0000C000)     /*!< VOS[1:0] bits (Regulator voltage scaling output selection) */
+#define  PWR_CR_VOS_0                        ((uint32_t)0x00004000)     /*!< Bit 0 */
+#define  PWR_CR_VOS_1                        ((uint32_t)0x00008000)     /*!< Bit 1 */
+#define  PWR_CR_ODEN                         ((uint32_t)0x00010000)     /*!< Over Drive enable                   */
+#define  PWR_CR_ODSWEN                       ((uint32_t)0x00020000)     /*!< Over Drive switch enabled           */
+#define  PWR_CR_UDEN                         ((uint32_t)0x000C0000)     /*!< Under Drive enable in stop mode     */
+#define  PWR_CR_UDEN_0                       ((uint32_t)0x00040000)     /*!< Bit 0                               */
+#define  PWR_CR_UDEN_1                       ((uint32_t)0x00080000)     /*!< Bit 1                               */
+
+/* Legacy define */
+#define  PWR_CR_PMODE                        PWR_CR_VOS
+#define  PWR_CR_LPUDS                        PWR_CR_LPLVDS     /*!< Low-Power Regulator in deepsleep under-drive mode          */
+#define  PWR_CR_MRUDS                        PWR_CR_MRLVDS     /*!< Main regulator in deepsleep under-drive mode               */
+
+/*******************  Bit definition for PWR_CSR register  ********************/
+#define  PWR_CSR_WUF                         ((uint32_t)0x00000001)     /*!< Wakeup Flag                                      */
+#define  PWR_CSR_SBF                         ((uint32_t)0x00000002)     /*!< Standby Flag                                     */
+#define  PWR_CSR_PVDO                        ((uint32_t)0x00000004)     /*!< PVD Output                                       */
+#define  PWR_CSR_BRR                         ((uint32_t)0x00000008)     /*!< Backup regulator ready                           */
+#define  PWR_CSR_EWUP                        ((uint32_t)0x00000100)     /*!< Enable WKUP pin                                  */
+#define  PWR_CSR_BRE                         ((uint32_t)0x00000200)     /*!< Backup regulator enable                          */
+#define  PWR_CSR_VOSRDY                      ((uint32_t)0x00004000)     /*!< Regulator voltage scaling output selection ready */
+#define  PWR_CSR_ODRDY                       ((uint32_t)0x00010000)     /*!< Over Drive generator ready                       */
+#define  PWR_CSR_ODSWRDY                     ((uint32_t)0x00020000)     /*!< Over Drive Switch ready                          */
+#define  PWR_CSR_UDSWRDY                     ((uint32_t)0x000C0000)     /*!< Under Drive ready                                */
+
+/* Legacy define */
+#define  PWR_CSR_REGRDY                      PWR_CSR_VOSRDY
+
+/******************************************************************************/
+/*                                                                            */
+/*                         Reset and Clock Control                            */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for RCC_CR register  ********************/
+#define  RCC_CR_HSION                        ((uint32_t)0x00000001)
+#define  RCC_CR_HSIRDY                       ((uint32_t)0x00000002)
+
+#define  RCC_CR_HSITRIM                      ((uint32_t)0x000000F8)
+#define  RCC_CR_HSITRIM_0                    ((uint32_t)0x00000008)/*!<Bit 0 */
+#define  RCC_CR_HSITRIM_1                    ((uint32_t)0x00000010)/*!<Bit 1 */
+#define  RCC_CR_HSITRIM_2                    ((uint32_t)0x00000020)/*!<Bit 2 */
+#define  RCC_CR_HSITRIM_3                    ((uint32_t)0x00000040)/*!<Bit 3 */
+#define  RCC_CR_HSITRIM_4                    ((uint32_t)0x00000080)/*!<Bit 4 */
+
+#define  RCC_CR_HSICAL                       ((uint32_t)0x0000FF00)
+#define  RCC_CR_HSICAL_0                     ((uint32_t)0x00000100)/*!<Bit 0 */
+#define  RCC_CR_HSICAL_1                     ((uint32_t)0x00000200)/*!<Bit 1 */
+#define  RCC_CR_HSICAL_2                     ((uint32_t)0x00000400)/*!<Bit 2 */
+#define  RCC_CR_HSICAL_3                     ((uint32_t)0x00000800)/*!<Bit 3 */
+#define  RCC_CR_HSICAL_4                     ((uint32_t)0x00001000)/*!<Bit 4 */
+#define  RCC_CR_HSICAL_5                     ((uint32_t)0x00002000)/*!<Bit 5 */
+#define  RCC_CR_HSICAL_6                     ((uint32_t)0x00004000)/*!<Bit 6 */
+#define  RCC_CR_HSICAL_7                     ((uint32_t)0x00008000)/*!<Bit 7 */
+
+#define  RCC_CR_HSEON                        ((uint32_t)0x00010000)
+#define  RCC_CR_HSERDY                       ((uint32_t)0x00020000)
+#define  RCC_CR_HSEBYP                       ((uint32_t)0x00040000)
+#define  RCC_CR_CSSON                        ((uint32_t)0x00080000)
+#define  RCC_CR_PLLON                        ((uint32_t)0x01000000)
+#define  RCC_CR_PLLRDY                       ((uint32_t)0x02000000)
+#define  RCC_CR_PLLI2SON                     ((uint32_t)0x04000000)
+#define  RCC_CR_PLLI2SRDY                    ((uint32_t)0x08000000)
+#define  RCC_CR_PLLSAION                     ((uint32_t)0x10000000)
+#define  RCC_CR_PLLSAIRDY                    ((uint32_t)0x20000000)
+
+/********************  Bit definition for RCC_PLLCFGR register  ***************/
+#define  RCC_PLLCFGR_PLLM                    ((uint32_t)0x0000003F)
+#define  RCC_PLLCFGR_PLLM_0                  ((uint32_t)0x00000001)
+#define  RCC_PLLCFGR_PLLM_1                  ((uint32_t)0x00000002)
+#define  RCC_PLLCFGR_PLLM_2                  ((uint32_t)0x00000004)
+#define  RCC_PLLCFGR_PLLM_3                  ((uint32_t)0x00000008)
+#define  RCC_PLLCFGR_PLLM_4                  ((uint32_t)0x00000010)
+#define  RCC_PLLCFGR_PLLM_5                  ((uint32_t)0x00000020)
+
+#define  RCC_PLLCFGR_PLLN                     ((uint32_t)0x00007FC0)
+#define  RCC_PLLCFGR_PLLN_0                   ((uint32_t)0x00000040)
+#define  RCC_PLLCFGR_PLLN_1                   ((uint32_t)0x00000080)
+#define  RCC_PLLCFGR_PLLN_2                   ((uint32_t)0x00000100)
+#define  RCC_PLLCFGR_PLLN_3                   ((uint32_t)0x00000200)
+#define  RCC_PLLCFGR_PLLN_4                   ((uint32_t)0x00000400)
+#define  RCC_PLLCFGR_PLLN_5                   ((uint32_t)0x00000800)
+#define  RCC_PLLCFGR_PLLN_6                   ((uint32_t)0x00001000)
+#define  RCC_PLLCFGR_PLLN_7                   ((uint32_t)0x00002000)
+#define  RCC_PLLCFGR_PLLN_8                   ((uint32_t)0x00004000)
+
+#define  RCC_PLLCFGR_PLLP                    ((uint32_t)0x00030000)
+#define  RCC_PLLCFGR_PLLP_0                  ((uint32_t)0x00010000)
+#define  RCC_PLLCFGR_PLLP_1                  ((uint32_t)0x00020000)
+
+#define  RCC_PLLCFGR_PLLSRC                  ((uint32_t)0x00400000)
+#define  RCC_PLLCFGR_PLLSRC_HSE              ((uint32_t)0x00400000)
+#define  RCC_PLLCFGR_PLLSRC_HSI              ((uint32_t)0x00000000)
+
+#define  RCC_PLLCFGR_PLLQ                    ((uint32_t)0x0F000000)
+#define  RCC_PLLCFGR_PLLQ_0                  ((uint32_t)0x01000000)
+#define  RCC_PLLCFGR_PLLQ_1                  ((uint32_t)0x02000000)
+#define  RCC_PLLCFGR_PLLQ_2                  ((uint32_t)0x04000000)
+#define  RCC_PLLCFGR_PLLQ_3                  ((uint32_t)0x08000000)
+
+/********************  Bit definition for RCC_CFGR register  ******************/
+/*!< SW configuration */
+#define  RCC_CFGR_SW                         ((uint32_t)0x00000003)        /*!< SW[1:0] bits (System clock Switch) */
+#define  RCC_CFGR_SW_0                       ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  RCC_CFGR_SW_1                       ((uint32_t)0x00000002)        /*!< Bit 1 */
+
+#define  RCC_CFGR_SW_HSI                     ((uint32_t)0x00000000)        /*!< HSI selected as system clock */
+#define  RCC_CFGR_SW_HSE                     ((uint32_t)0x00000001)        /*!< HSE selected as system clock */
+#define  RCC_CFGR_SW_PLL                     ((uint32_t)0x00000002)        /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define  RCC_CFGR_SWS                        ((uint32_t)0x0000000C)        /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define  RCC_CFGR_SWS_0                      ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  RCC_CFGR_SWS_1                      ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  RCC_CFGR_SWS_HSI                    ((uint32_t)0x00000000)        /*!< HSI oscillator used as system clock */
+#define  RCC_CFGR_SWS_HSE                    ((uint32_t)0x00000004)        /*!< HSE oscillator used as system clock */
+#define  RCC_CFGR_SWS_PLL                    ((uint32_t)0x00000008)        /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define  RCC_CFGR_HPRE                       ((uint32_t)0x000000F0)        /*!< HPRE[3:0] bits (AHB prescaler) */
+#define  RCC_CFGR_HPRE_0                     ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  RCC_CFGR_HPRE_1                     ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  RCC_CFGR_HPRE_2                     ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  RCC_CFGR_HPRE_3                     ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  RCC_CFGR_HPRE_DIV1                  ((uint32_t)0x00000000)        /*!< SYSCLK not divided */
+#define  RCC_CFGR_HPRE_DIV2                  ((uint32_t)0x00000080)        /*!< SYSCLK divided by 2 */
+#define  RCC_CFGR_HPRE_DIV4                  ((uint32_t)0x00000090)        /*!< SYSCLK divided by 4 */
+#define  RCC_CFGR_HPRE_DIV8                  ((uint32_t)0x000000A0)        /*!< SYSCLK divided by 8 */
+#define  RCC_CFGR_HPRE_DIV16                 ((uint32_t)0x000000B0)        /*!< SYSCLK divided by 16 */
+#define  RCC_CFGR_HPRE_DIV64                 ((uint32_t)0x000000C0)        /*!< SYSCLK divided by 64 */
+#define  RCC_CFGR_HPRE_DIV128                ((uint32_t)0x000000D0)        /*!< SYSCLK divided by 128 */
+#define  RCC_CFGR_HPRE_DIV256                ((uint32_t)0x000000E0)        /*!< SYSCLK divided by 256 */
+#define  RCC_CFGR_HPRE_DIV512                ((uint32_t)0x000000F0)        /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define  RCC_CFGR_PPRE1                      ((uint32_t)0x00001C00)        /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define  RCC_CFGR_PPRE1_0                    ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  RCC_CFGR_PPRE1_1                    ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  RCC_CFGR_PPRE1_2                    ((uint32_t)0x00001000)        /*!< Bit 2 */
+
+#define  RCC_CFGR_PPRE1_DIV1                 ((uint32_t)0x00000000)        /*!< HCLK not divided */
+#define  RCC_CFGR_PPRE1_DIV2                 ((uint32_t)0x00001000)        /*!< HCLK divided by 2 */
+#define  RCC_CFGR_PPRE1_DIV4                 ((uint32_t)0x00001400)        /*!< HCLK divided by 4 */
+#define  RCC_CFGR_PPRE1_DIV8                 ((uint32_t)0x00001800)        /*!< HCLK divided by 8 */
+#define  RCC_CFGR_PPRE1_DIV16                ((uint32_t)0x00001C00)        /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define  RCC_CFGR_PPRE2                      ((uint32_t)0x0000E000)        /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define  RCC_CFGR_PPRE2_0                    ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define  RCC_CFGR_PPRE2_1                    ((uint32_t)0x00004000)        /*!< Bit 1 */
+#define  RCC_CFGR_PPRE2_2                    ((uint32_t)0x00008000)        /*!< Bit 2 */
+
+#define  RCC_CFGR_PPRE2_DIV1                 ((uint32_t)0x00000000)        /*!< HCLK not divided */
+#define  RCC_CFGR_PPRE2_DIV2                 ((uint32_t)0x00008000)        /*!< HCLK divided by 2 */
+#define  RCC_CFGR_PPRE2_DIV4                 ((uint32_t)0x0000A000)        /*!< HCLK divided by 4 */
+#define  RCC_CFGR_PPRE2_DIV8                 ((uint32_t)0x0000C000)        /*!< HCLK divided by 8 */
+#define  RCC_CFGR_PPRE2_DIV16                ((uint32_t)0x0000E000)        /*!< HCLK divided by 16 */
+
+/*!< RTCPRE configuration */
+#define  RCC_CFGR_RTCPRE                     ((uint32_t)0x001F0000)
+#define  RCC_CFGR_RTCPRE_0                   ((uint32_t)0x00010000)
+#define  RCC_CFGR_RTCPRE_1                   ((uint32_t)0x00020000)
+#define  RCC_CFGR_RTCPRE_2                   ((uint32_t)0x00040000)
+#define  RCC_CFGR_RTCPRE_3                   ((uint32_t)0x00080000)
+#define  RCC_CFGR_RTCPRE_4                   ((uint32_t)0x00100000)
+
+/*!< MCO1 configuration */
+#define  RCC_CFGR_MCO1                       ((uint32_t)0x00600000)
+#define  RCC_CFGR_MCO1_0                     ((uint32_t)0x00200000)
+#define  RCC_CFGR_MCO1_1                     ((uint32_t)0x00400000)
+
+#define  RCC_CFGR_I2SSRC                     ((uint32_t)0x00800000)
+
+#define  RCC_CFGR_MCO1PRE                    ((uint32_t)0x07000000)
+#define  RCC_CFGR_MCO1PRE_0                  ((uint32_t)0x01000000)
+#define  RCC_CFGR_MCO1PRE_1                  ((uint32_t)0x02000000)
+#define  RCC_CFGR_MCO1PRE_2                  ((uint32_t)0x04000000)
+
+#define  RCC_CFGR_MCO2PRE                    ((uint32_t)0x38000000)
+#define  RCC_CFGR_MCO2PRE_0                  ((uint32_t)0x08000000)
+#define  RCC_CFGR_MCO2PRE_1                  ((uint32_t)0x10000000)
+#define  RCC_CFGR_MCO2PRE_2                  ((uint32_t)0x20000000)
+
+#define  RCC_CFGR_MCO2                       ((uint32_t)0xC0000000)
+#define  RCC_CFGR_MCO2_0                     ((uint32_t)0x40000000)
+#define  RCC_CFGR_MCO2_1                     ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_CIR register  *******************/
+#define  RCC_CIR_LSIRDYF                     ((uint32_t)0x00000001)
+#define  RCC_CIR_LSERDYF                     ((uint32_t)0x00000002)
+#define  RCC_CIR_HSIRDYF                     ((uint32_t)0x00000004)
+#define  RCC_CIR_HSERDYF                     ((uint32_t)0x00000008)
+#define  RCC_CIR_PLLRDYF                     ((uint32_t)0x00000010)
+#define  RCC_CIR_PLLI2SRDYF                  ((uint32_t)0x00000020)
+#define  RCC_CIR_PLLSAIRDYF                  ((uint32_t)0x00000040)
+#define  RCC_CIR_CSSF                        ((uint32_t)0x00000080)
+#define  RCC_CIR_LSIRDYIE                    ((uint32_t)0x00000100)
+#define  RCC_CIR_LSERDYIE                    ((uint32_t)0x00000200)
+#define  RCC_CIR_HSIRDYIE                    ((uint32_t)0x00000400)
+#define  RCC_CIR_HSERDYIE                    ((uint32_t)0x00000800)
+#define  RCC_CIR_PLLRDYIE                    ((uint32_t)0x00001000)
+#define  RCC_CIR_PLLI2SRDYIE                 ((uint32_t)0x00002000)
+#define  RCC_CIR_PLLSAIRDYIE                 ((uint32_t)0x00004000)
+#define  RCC_CIR_LSIRDYC                     ((uint32_t)0x00010000)
+#define  RCC_CIR_LSERDYC                     ((uint32_t)0x00020000)
+#define  RCC_CIR_HSIRDYC                     ((uint32_t)0x00040000)
+#define  RCC_CIR_HSERDYC                     ((uint32_t)0x00080000)
+#define  RCC_CIR_PLLRDYC                     ((uint32_t)0x00100000)
+#define  RCC_CIR_PLLI2SRDYC                  ((uint32_t)0x00200000)
+#define  RCC_CIR_PLLSAIRDYC                  ((uint32_t)0x00400000)
+#define  RCC_CIR_CSSC                        ((uint32_t)0x00800000)
+
+/********************  Bit definition for RCC_AHB1RSTR register  **************/
+#define  RCC_AHB1RSTR_GPIOARST               ((uint32_t)0x00000001)
+#define  RCC_AHB1RSTR_GPIOBRST               ((uint32_t)0x00000002)
+#define  RCC_AHB1RSTR_GPIOCRST               ((uint32_t)0x00000004)
+#define  RCC_AHB1RSTR_GPIODRST               ((uint32_t)0x00000008)
+#define  RCC_AHB1RSTR_GPIOERST               ((uint32_t)0x00000010)
+#define  RCC_AHB1RSTR_GPIOFRST               ((uint32_t)0x00000020)
+#define  RCC_AHB1RSTR_GPIOGRST               ((uint32_t)0x00000040)
+#define  RCC_AHB1RSTR_GPIOHRST               ((uint32_t)0x00000080)
+#define  RCC_AHB1RSTR_GPIOIRST               ((uint32_t)0x00000100)
+#define  RCC_AHB1RSTR_GPIOJRST               ((uint32_t)0x00000200)
+#define  RCC_AHB1RSTR_GPIOKRST               ((uint32_t)0x00000400)
+#define  RCC_AHB1RSTR_CRCRST                 ((uint32_t)0x00001000)
+#define  RCC_AHB1RSTR_DMA1RST                ((uint32_t)0x00200000)
+#define  RCC_AHB1RSTR_DMA2RST                ((uint32_t)0x00400000)
+#define  RCC_AHB1RSTR_DMA2DRST               ((uint32_t)0x00800000)
+#define  RCC_AHB1RSTR_ETHMACRST              ((uint32_t)0x02000000)
+#define  RCC_AHB1RSTR_OTGHRST                ((uint32_t)0x20000000)
+
+/********************  Bit definition for RCC_AHB2RSTR register  **************/
+#define  RCC_AHB2RSTR_DCMIRST                ((uint32_t)0x00000001)
+#define  RCC_AHB2RSTR_RNGRST                 ((uint32_t)0x00000040)
+#define  RCC_AHB2RSTR_OTGFSRST               ((uint32_t)0x00000080)
+
+/********************  Bit definition for RCC_AHB3RSTR register  **************/
+#define  RCC_AHB3RSTR_FMCRST                ((uint32_t)0x00000001)
+
+/********************  Bit definition for RCC_APB1RSTR register  **************/
+#define  RCC_APB1RSTR_TIM2RST                ((uint32_t)0x00000001)
+#define  RCC_APB1RSTR_TIM3RST                ((uint32_t)0x00000002)
+#define  RCC_APB1RSTR_TIM4RST                ((uint32_t)0x00000004)
+#define  RCC_APB1RSTR_TIM5RST                ((uint32_t)0x00000008)
+#define  RCC_APB1RSTR_TIM6RST                ((uint32_t)0x00000010)
+#define  RCC_APB1RSTR_TIM7RST                ((uint32_t)0x00000020)
+#define  RCC_APB1RSTR_TIM12RST               ((uint32_t)0x00000040)
+#define  RCC_APB1RSTR_TIM13RST               ((uint32_t)0x00000080)
+#define  RCC_APB1RSTR_TIM14RST               ((uint32_t)0x00000100)
+#define  RCC_APB1RSTR_WWDGRST                ((uint32_t)0x00000800)
+#define  RCC_APB1RSTR_SPI2RST                ((uint32_t)0x00004000)
+#define  RCC_APB1RSTR_SPI3RST                ((uint32_t)0x00008000)
+#define  RCC_APB1RSTR_USART2RST              ((uint32_t)0x00020000)
+#define  RCC_APB1RSTR_USART3RST              ((uint32_t)0x00040000)
+#define  RCC_APB1RSTR_UART4RST               ((uint32_t)0x00080000)
+#define  RCC_APB1RSTR_UART5RST               ((uint32_t)0x00100000)
+#define  RCC_APB1RSTR_I2C1RST                ((uint32_t)0x00200000)
+#define  RCC_APB1RSTR_I2C2RST                ((uint32_t)0x00400000)
+#define  RCC_APB1RSTR_I2C3RST                ((uint32_t)0x00800000)
+#define  RCC_APB1RSTR_CAN1RST                ((uint32_t)0x02000000)
+#define  RCC_APB1RSTR_CAN2RST                ((uint32_t)0x04000000)
+#define  RCC_APB1RSTR_PWRRST                 ((uint32_t)0x10000000)
+#define  RCC_APB1RSTR_DACRST                 ((uint32_t)0x20000000)
+#define  RCC_APB1RSTR_UART7RST               ((uint32_t)0x40000000)
+#define  RCC_APB1RSTR_UART8RST               ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_APB2RSTR register  **************/
+#define  RCC_APB2RSTR_TIM1RST                ((uint32_t)0x00000001)
+#define  RCC_APB2RSTR_TIM8RST                ((uint32_t)0x00000002)
+#define  RCC_APB2RSTR_USART1RST              ((uint32_t)0x00000010)
+#define  RCC_APB2RSTR_USART6RST              ((uint32_t)0x00000020)
+#define  RCC_APB2RSTR_ADCRST                 ((uint32_t)0x00000100)
+#define  RCC_APB2RSTR_SDIORST                ((uint32_t)0x00000800)
+#define  RCC_APB2RSTR_SPI1RST                ((uint32_t)0x00001000)
+#define  RCC_APB2RSTR_SPI4RST                ((uint32_t)0x00002000)
+#define  RCC_APB2RSTR_SYSCFGRST              ((uint32_t)0x00004000)
+#define  RCC_APB2RSTR_TIM9RST                ((uint32_t)0x00010000)
+#define  RCC_APB2RSTR_TIM10RST               ((uint32_t)0x00020000)
+#define  RCC_APB2RSTR_TIM11RST               ((uint32_t)0x00040000)
+#define  RCC_APB2RSTR_SPI5RST                ((uint32_t)0x00100000)
+#define  RCC_APB2RSTR_SPI6RST                ((uint32_t)0x00200000)
+#define  RCC_APB2RSTR_SAI1RST                ((uint32_t)0x00400000)
+#define  RCC_APB2RSTR_LTDCRST                ((uint32_t)0x04000000)
+
+/* Old SPI1RST bit definition, maintained for legacy purpose */
+#define  RCC_APB2RSTR_SPI1                   RCC_APB2RSTR_SPI1RST
+
+/********************  Bit definition for RCC_AHB1ENR register  ***************/
+#define  RCC_AHB1ENR_GPIOAEN                 ((uint32_t)0x00000001)
+#define  RCC_AHB1ENR_GPIOBEN                 ((uint32_t)0x00000002)
+#define  RCC_AHB1ENR_GPIOCEN                 ((uint32_t)0x00000004)
+#define  RCC_AHB1ENR_GPIODEN                 ((uint32_t)0x00000008)
+#define  RCC_AHB1ENR_GPIOEEN                 ((uint32_t)0x00000010)
+#define  RCC_AHB1ENR_GPIOFEN                 ((uint32_t)0x00000020)
+#define  RCC_AHB1ENR_GPIOGEN                 ((uint32_t)0x00000040)
+#define  RCC_AHB1ENR_GPIOHEN                 ((uint32_t)0x00000080)
+#define  RCC_AHB1ENR_GPIOIEN                 ((uint32_t)0x00000100)
+#define  RCC_AHB1ENR_GPIOJEN                 ((uint32_t)0x00000200)
+#define  RCC_AHB1ENR_GPIOKEN                 ((uint32_t)0x00000400)
+
+#define  RCC_AHB1ENR_CRCEN                   ((uint32_t)0x00001000)
+#define  RCC_AHB1ENR_BKPSRAMEN               ((uint32_t)0x00040000)
+#define  RCC_AHB1ENR_CCMDATARAMEN            ((uint32_t)0x00100000)
+#define  RCC_AHB1ENR_DMA1EN                  ((uint32_t)0x00200000)
+#define  RCC_AHB1ENR_DMA2EN                  ((uint32_t)0x00400000)
+#define  RCC_AHB1ENR_DMA2DEN                 ((uint32_t)0x00800000)
+
+#define  RCC_AHB1ENR_ETHMACEN                ((uint32_t)0x02000000)
+#define  RCC_AHB1ENR_ETHMACTXEN              ((uint32_t)0x04000000)
+#define  RCC_AHB1ENR_ETHMACRXEN              ((uint32_t)0x08000000)
+#define  RCC_AHB1ENR_ETHMACPTPEN             ((uint32_t)0x10000000)
+#define  RCC_AHB1ENR_OTGHSEN                 ((uint32_t)0x20000000)
+#define  RCC_AHB1ENR_OTGHSULPIEN             ((uint32_t)0x40000000)
+
+/********************  Bit definition for RCC_AHB2ENR register  ***************/
+#define  RCC_AHB2ENR_DCMIEN                  ((uint32_t)0x00000001)
+#define  RCC_AHB2ENR_RNGEN                   ((uint32_t)0x00000040)
+#define  RCC_AHB2ENR_OTGFSEN                 ((uint32_t)0x00000080)
+
+/********************  Bit definition for RCC_AHB3ENR register  ***************/
+#define  RCC_AHB3ENR_FMCEN                  ((uint32_t)0x00000001)
+
+/********************  Bit definition for RCC_APB1ENR register  ***************/
+#define  RCC_APB1ENR_TIM2EN                  ((uint32_t)0x00000001)
+#define  RCC_APB1ENR_TIM3EN                  ((uint32_t)0x00000002)
+#define  RCC_APB1ENR_TIM4EN                  ((uint32_t)0x00000004)
+#define  RCC_APB1ENR_TIM5EN                  ((uint32_t)0x00000008)
+#define  RCC_APB1ENR_TIM6EN                  ((uint32_t)0x00000010)
+#define  RCC_APB1ENR_TIM7EN                  ((uint32_t)0x00000020)
+#define  RCC_APB1ENR_TIM12EN                 ((uint32_t)0x00000040)
+#define  RCC_APB1ENR_TIM13EN                 ((uint32_t)0x00000080)
+#define  RCC_APB1ENR_TIM14EN                 ((uint32_t)0x00000100)
+#define  RCC_APB1ENR_WWDGEN                  ((uint32_t)0x00000800)
+#define  RCC_APB1ENR_SPI2EN                  ((uint32_t)0x00004000)
+#define  RCC_APB1ENR_SPI3EN                  ((uint32_t)0x00008000)
+#define  RCC_APB1ENR_USART2EN                ((uint32_t)0x00020000)
+#define  RCC_APB1ENR_USART3EN                ((uint32_t)0x00040000)
+#define  RCC_APB1ENR_UART4EN                 ((uint32_t)0x00080000)
+#define  RCC_APB1ENR_UART5EN                 ((uint32_t)0x00100000)
+#define  RCC_APB1ENR_I2C1EN                  ((uint32_t)0x00200000)
+#define  RCC_APB1ENR_I2C2EN                  ((uint32_t)0x00400000)
+#define  RCC_APB1ENR_I2C3EN                  ((uint32_t)0x00800000)
+#define  RCC_APB1ENR_CAN1EN                  ((uint32_t)0x02000000)
+#define  RCC_APB1ENR_CAN2EN                  ((uint32_t)0x04000000)
+#define  RCC_APB1ENR_PWREN                   ((uint32_t)0x10000000)
+#define  RCC_APB1ENR_DACEN                   ((uint32_t)0x20000000)
+#define  RCC_APB1ENR_UART7EN                 ((uint32_t)0x40000000)
+#define  RCC_APB1ENR_UART8EN                 ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_APB2ENR register  ***************/
+#define  RCC_APB2ENR_TIM1EN                  ((uint32_t)0x00000001)
+#define  RCC_APB2ENR_TIM8EN                  ((uint32_t)0x00000002)
+#define  RCC_APB2ENR_USART1EN                ((uint32_t)0x00000010)
+#define  RCC_APB2ENR_USART6EN                ((uint32_t)0x00000020)
+#define  RCC_APB2ENR_ADC1EN                  ((uint32_t)0x00000100)
+#define  RCC_APB2ENR_ADC2EN                  ((uint32_t)0x00000200)
+#define  RCC_APB2ENR_ADC3EN                  ((uint32_t)0x00000400)
+#define  RCC_APB2ENR_SDIOEN                  ((uint32_t)0x00000800)
+#define  RCC_APB2ENR_SPI1EN                  ((uint32_t)0x00001000)
+#define  RCC_APB2ENR_SPI4EN                  ((uint32_t)0x00002000)
+#define  RCC_APB2ENR_SYSCFGEN                ((uint32_t)0x00004000)
+#define  RCC_APB2ENR_TIM9EN                  ((uint32_t)0x00010000)
+#define  RCC_APB2ENR_TIM10EN                 ((uint32_t)0x00020000)
+#define  RCC_APB2ENR_TIM11EN                 ((uint32_t)0x00040000)
+#define  RCC_APB2ENR_SPI5EN                  ((uint32_t)0x00100000)
+#define  RCC_APB2ENR_SPI6EN                  ((uint32_t)0x00200000)
+#define  RCC_APB2ENR_SAI1EN                  ((uint32_t)0x00400000)
+#define  RCC_APB2ENR_LTDCEN                  ((uint32_t)0x04000000)
+
+/********************  Bit definition for RCC_AHB1LPENR register  *************/
+#define  RCC_AHB1LPENR_GPIOALPEN             ((uint32_t)0x00000001)
+#define  RCC_AHB1LPENR_GPIOBLPEN             ((uint32_t)0x00000002)
+#define  RCC_AHB1LPENR_GPIOCLPEN             ((uint32_t)0x00000004)
+#define  RCC_AHB1LPENR_GPIODLPEN             ((uint32_t)0x00000008)
+#define  RCC_AHB1LPENR_GPIOELPEN             ((uint32_t)0x00000010)
+#define  RCC_AHB1LPENR_GPIOFLPEN             ((uint32_t)0x00000020)
+#define  RCC_AHB1LPENR_GPIOGLPEN             ((uint32_t)0x00000040)
+#define  RCC_AHB1LPENR_GPIOHLPEN             ((uint32_t)0x00000080)
+#define  RCC_AHB1LPENR_GPIOILPEN             ((uint32_t)0x00000100)
+#define  RCC_AHB1LPENR_GPIOJLPEN             ((uint32_t)0x00000200)
+#define  RCC_AHB1LPENR_GPIOKLPEN             ((uint32_t)0x00000400)
+
+#define  RCC_AHB1LPENR_CRCLPEN               ((uint32_t)0x00001000)
+#define  RCC_AHB1LPENR_FLITFLPEN             ((uint32_t)0x00008000)
+#define  RCC_AHB1LPENR_SRAM1LPEN             ((uint32_t)0x00010000)
+#define  RCC_AHB1LPENR_SRAM2LPEN             ((uint32_t)0x00020000)
+#define  RCC_AHB1LPENR_BKPSRAMLPEN           ((uint32_t)0x00040000)
+#define  RCC_AHB1LPENR_SRAM3LPEN             ((uint32_t)0x00080000)
+#define  RCC_AHB1LPENR_DMA1LPEN              ((uint32_t)0x00200000)
+#define  RCC_AHB1LPENR_DMA2LPEN              ((uint32_t)0x00400000)
+#define  RCC_AHB1LPENR_DMA2DLPEN             ((uint32_t)0x00800000)
+
+#define  RCC_AHB1LPENR_ETHMACLPEN            ((uint32_t)0x02000000)
+#define  RCC_AHB1LPENR_ETHMACTXLPEN          ((uint32_t)0x04000000)
+#define  RCC_AHB1LPENR_ETHMACRXLPEN          ((uint32_t)0x08000000)
+#define  RCC_AHB1LPENR_ETHMACPTPLPEN         ((uint32_t)0x10000000)
+#define  RCC_AHB1LPENR_OTGHSLPEN             ((uint32_t)0x20000000)
+#define  RCC_AHB1LPENR_OTGHSULPILPEN         ((uint32_t)0x40000000)
+
+/********************  Bit definition for RCC_AHB2LPENR register  *************/
+#define  RCC_AHB2LPENR_DCMILPEN              ((uint32_t)0x00000001)
+#define  RCC_AHB2LPENR_RNGLPEN               ((uint32_t)0x00000040)
+#define  RCC_AHB2LPENR_OTGFSLPEN             ((uint32_t)0x00000080)
+
+/********************  Bit definition for RCC_AHB3LPENR register  *************/
+#define  RCC_AHB3LPENR_FMCLPEN              ((uint32_t)0x00000001)
+
+/********************  Bit definition for RCC_APB1LPENR register  *************/
+#define  RCC_APB1LPENR_TIM2LPEN              ((uint32_t)0x00000001)
+#define  RCC_APB1LPENR_TIM3LPEN              ((uint32_t)0x00000002)
+#define  RCC_APB1LPENR_TIM4LPEN              ((uint32_t)0x00000004)
+#define  RCC_APB1LPENR_TIM5LPEN              ((uint32_t)0x00000008)
+#define  RCC_APB1LPENR_TIM6LPEN              ((uint32_t)0x00000010)
+#define  RCC_APB1LPENR_TIM7LPEN              ((uint32_t)0x00000020)
+#define  RCC_APB1LPENR_TIM12LPEN             ((uint32_t)0x00000040)
+#define  RCC_APB1LPENR_TIM13LPEN             ((uint32_t)0x00000080)
+#define  RCC_APB1LPENR_TIM14LPEN             ((uint32_t)0x00000100)
+#define  RCC_APB1LPENR_WWDGLPEN              ((uint32_t)0x00000800)
+#define  RCC_APB1LPENR_SPI2LPEN              ((uint32_t)0x00004000)
+#define  RCC_APB1LPENR_SPI3LPEN              ((uint32_t)0x00008000)
+#define  RCC_APB1LPENR_USART2LPEN            ((uint32_t)0x00020000)
+#define  RCC_APB1LPENR_USART3LPEN            ((uint32_t)0x00040000)
+#define  RCC_APB1LPENR_UART4LPEN             ((uint32_t)0x00080000)
+#define  RCC_APB1LPENR_UART5LPEN             ((uint32_t)0x00100000)
+#define  RCC_APB1LPENR_I2C1LPEN              ((uint32_t)0x00200000)
+#define  RCC_APB1LPENR_I2C2LPEN              ((uint32_t)0x00400000)
+#define  RCC_APB1LPENR_I2C3LPEN              ((uint32_t)0x00800000)
+#define  RCC_APB1LPENR_CAN1LPEN              ((uint32_t)0x02000000)
+#define  RCC_APB1LPENR_CAN2LPEN              ((uint32_t)0x04000000)
+#define  RCC_APB1LPENR_PWRLPEN               ((uint32_t)0x10000000)
+#define  RCC_APB1LPENR_DACLPEN               ((uint32_t)0x20000000)
+#define  RCC_APB1LPENR_UART7LPEN             ((uint32_t)0x40000000)
+#define  RCC_APB1LPENR_UART8LPEN             ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_APB2LPENR register  *************/
+#define  RCC_APB2LPENR_TIM1LPEN              ((uint32_t)0x00000001)
+#define  RCC_APB2LPENR_TIM8LPEN              ((uint32_t)0x00000002)
+#define  RCC_APB2LPENR_USART1LPEN            ((uint32_t)0x00000010)
+#define  RCC_APB2LPENR_USART6LPEN            ((uint32_t)0x00000020)
+#define  RCC_APB2LPENR_ADC1LPEN              ((uint32_t)0x00000100)
+#define  RCC_APB2LPENR_ADC2LPEN              ((uint32_t)0x00000200)
+#define  RCC_APB2LPENR_ADC3LPEN              ((uint32_t)0x00000400)
+#define  RCC_APB2LPENR_SDIOLPEN              ((uint32_t)0x00000800)
+#define  RCC_APB2LPENR_SPI1LPEN              ((uint32_t)0x00001000)
+#define  RCC_APB2LPENR_SPI4LPEN              ((uint32_t)0x00002000)
+#define  RCC_APB2LPENR_SYSCFGLPEN            ((uint32_t)0x00004000)
+#define  RCC_APB2LPENR_TIM9LPEN              ((uint32_t)0x00010000)
+#define  RCC_APB2LPENR_TIM10LPEN             ((uint32_t)0x00020000)
+#define  RCC_APB2LPENR_TIM11LPEN             ((uint32_t)0x00040000)
+#define  RCC_APB2LPENR_SPI5LPEN              ((uint32_t)0x00100000)
+#define  RCC_APB2LPENR_SPI6LPEN              ((uint32_t)0x00200000)
+#define  RCC_APB2LPENR_SAI1LPEN              ((uint32_t)0x00400000)
+#define  RCC_APB2LPENR_LTDCLPEN              ((uint32_t)0x04000000)
+
+/********************  Bit definition for RCC_BDCR register  ******************/
+#define  RCC_BDCR_LSEON                      ((uint32_t)0x00000001)
+#define  RCC_BDCR_LSERDY                     ((uint32_t)0x00000002)
+#define  RCC_BDCR_LSEBYP                     ((uint32_t)0x00000004)
+
+#define  RCC_BDCR_RTCSEL                    ((uint32_t)0x00000300)
+#define  RCC_BDCR_RTCSEL_0                  ((uint32_t)0x00000100)
+#define  RCC_BDCR_RTCSEL_1                  ((uint32_t)0x00000200)
+
+#define  RCC_BDCR_RTCEN                      ((uint32_t)0x00008000)
+#define  RCC_BDCR_BDRST                      ((uint32_t)0x00010000)
+
+/********************  Bit definition for RCC_CSR register  *******************/
+#define  RCC_CSR_LSION                       ((uint32_t)0x00000001)
+#define  RCC_CSR_LSIRDY                      ((uint32_t)0x00000002)
+#define  RCC_CSR_RMVF                        ((uint32_t)0x01000000)
+#define  RCC_CSR_BORRSTF                     ((uint32_t)0x02000000)
+#define  RCC_CSR_PADRSTF                     ((uint32_t)0x04000000)
+#define  RCC_CSR_PORRSTF                     ((uint32_t)0x08000000)
+#define  RCC_CSR_SFTRSTF                     ((uint32_t)0x10000000)
+#define  RCC_CSR_WDGRSTF                     ((uint32_t)0x20000000)
+#define  RCC_CSR_WWDGRSTF                    ((uint32_t)0x40000000)
+#define  RCC_CSR_LPWRRSTF                    ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_SSCGR register  *****************/
+#define  RCC_SSCGR_MODPER                    ((uint32_t)0x00001FFF)
+#define  RCC_SSCGR_INCSTEP                   ((uint32_t)0x0FFFE000)
+#define  RCC_SSCGR_SPREADSEL                 ((uint32_t)0x40000000)
+#define  RCC_SSCGR_SSCGEN                    ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_PLLI2SCFGR register  ************/
+#define  RCC_PLLI2SCFGR_PLLI2SN              ((uint32_t)0x00007FC0)
+#define  RCC_PLLI2SCFGR_PLLI2SN_0            ((uint32_t)0x00000040)
+#define  RCC_PLLI2SCFGR_PLLI2SN_1            ((uint32_t)0x00000080)
+#define  RCC_PLLI2SCFGR_PLLI2SN_2            ((uint32_t)0x00000100)
+#define  RCC_PLLI2SCFGR_PLLI2SN_3            ((uint32_t)0x00000200)
+#define  RCC_PLLI2SCFGR_PLLI2SN_4            ((uint32_t)0x00000400)
+#define  RCC_PLLI2SCFGR_PLLI2SN_5            ((uint32_t)0x00000800)
+#define  RCC_PLLI2SCFGR_PLLI2SN_6            ((uint32_t)0x00001000)
+#define  RCC_PLLI2SCFGR_PLLI2SN_7            ((uint32_t)0x00002000)
+#define  RCC_PLLI2SCFGR_PLLI2SN_8            ((uint32_t)0x00004000)
+
+#define  RCC_PLLI2SCFGR_PLLI2SQ              ((uint32_t)0x0F000000)
+#define  RCC_PLLI2SCFGR_PLLI2SQ_0            ((uint32_t)0x01000000)
+#define  RCC_PLLI2SCFGR_PLLI2SQ_1            ((uint32_t)0x02000000)
+#define  RCC_PLLI2SCFGR_PLLI2SQ_2            ((uint32_t)0x04000000)
+#define  RCC_PLLI2SCFGR_PLLI2SQ_3            ((uint32_t)0x08000000)
+
+#define  RCC_PLLI2SCFGR_PLLI2SR              ((uint32_t)0x70000000)
+#define  RCC_PLLI2SCFGR_PLLI2SR_0            ((uint32_t)0x10000000)
+#define  RCC_PLLI2SCFGR_PLLI2SR_1            ((uint32_t)0x20000000)
+#define  RCC_PLLI2SCFGR_PLLI2SR_2            ((uint32_t)0x40000000)
+
+
+/********************  Bit definition for RCC_PLLSAICFGR register  ************/
+#define  RCC_PLLSAICFGR_PLLSAIN              ((uint32_t)0x00007FC0)
+#define  RCC_PLLSAICFGR_PLLSAIN_0            ((uint32_t)0x00000040)
+#define  RCC_PLLSAICFGR_PLLSAIN_1            ((uint32_t)0x00000080)
+#define  RCC_PLLSAICFGR_PLLSAIN_2            ((uint32_t)0x00000100)
+#define  RCC_PLLSAICFGR_PLLSAIN_3            ((uint32_t)0x00000200)
+#define  RCC_PLLSAICFGR_PLLSAIN_4            ((uint32_t)0x00000400)
+#define  RCC_PLLSAICFGR_PLLSAIN_5            ((uint32_t)0x00000800)
+#define  RCC_PLLSAICFGR_PLLSAIN_6            ((uint32_t)0x00001000)
+#define  RCC_PLLSAICFGR_PLLSAIN_7            ((uint32_t)0x00002000)
+#define  RCC_PLLSAICFGR_PLLSAIN_8            ((uint32_t)0x00004000)
+
+#define  RCC_PLLSAICFGR_PLLSAIQ              ((uint32_t)0x0F000000)
+#define  RCC_PLLSAICFGR_PLLSAIQ_0            ((uint32_t)0x01000000)
+#define  RCC_PLLSAICFGR_PLLSAIQ_1            ((uint32_t)0x02000000)
+#define  RCC_PLLSAICFGR_PLLSAIQ_2            ((uint32_t)0x04000000)
+#define  RCC_PLLSAICFGR_PLLSAIQ_3            ((uint32_t)0x08000000)
+
+#define  RCC_PLLSAICFGR_PLLSAIR              ((uint32_t)0x70000000)
+#define  RCC_PLLSAICFGR_PLLSAIR_0            ((uint32_t)0x10000000)
+#define  RCC_PLLSAICFGR_PLLSAIR_1            ((uint32_t)0x20000000)
+#define  RCC_PLLSAICFGR_PLLSAIR_2            ((uint32_t)0x40000000)
+
+/********************  Bit definition for RCC_DCKCFGR register  ***************/
+#define  RCC_DCKCFGR_PLLI2SDIVQ              ((uint32_t)0x0000001F)
+#define  RCC_DCKCFGR_PLLSAIDIVQ              ((uint32_t)0x00001F00)
+#define  RCC_DCKCFGR_PLLSAIDIVR              ((uint32_t)0x00030000)
+#define  RCC_DCKCFGR_SAI1ASRC                ((uint32_t)0x00300000)
+#define  RCC_DCKCFGR_SAI1ASRC_0              ((uint32_t)0x00100000)
+#define  RCC_DCKCFGR_SAI1ASRC_1              ((uint32_t)0x00200000)
+#define  RCC_DCKCFGR_SAI1BSRC                ((uint32_t)0x00C00000)
+#define  RCC_DCKCFGR_SAI1BSRC_0              ((uint32_t)0x00400000)
+#define  RCC_DCKCFGR_SAI1BSRC_1              ((uint32_t)0x00800000)
+#define  RCC_DCKCFGR_TIMPRE                  ((uint32_t)0x01000000)
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    RNG                                     */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bits definition for RNG_CR register  *******************/
+#define RNG_CR_RNGEN                         ((uint32_t)0x00000004)
+#define RNG_CR_IE                            ((uint32_t)0x00000008)
+
+/********************  Bits definition for RNG_SR register  *******************/
+#define RNG_SR_DRDY                          ((uint32_t)0x00000001)
+#define RNG_SR_CECS                          ((uint32_t)0x00000002)
+#define RNG_SR_SECS                          ((uint32_t)0x00000004)
+#define RNG_SR_CEIS                          ((uint32_t)0x00000020)
+#define RNG_SR_SEIS                          ((uint32_t)0x00000040)
+
+/******************************************************************************/
+/*                                                                            */
+/*                           Real-Time Clock (RTC)                            */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bits definition for RTC_TR register  *******************/
+#define RTC_TR_PM                            ((uint32_t)0x00400000)
+#define RTC_TR_HT                            ((uint32_t)0x00300000)
+#define RTC_TR_HT_0                          ((uint32_t)0x00100000)
+#define RTC_TR_HT_1                          ((uint32_t)0x00200000)
+#define RTC_TR_HU                            ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0                          ((uint32_t)0x00010000)
+#define RTC_TR_HU_1                          ((uint32_t)0x00020000)
+#define RTC_TR_HU_2                          ((uint32_t)0x00040000)
+#define RTC_TR_HU_3                          ((uint32_t)0x00080000)
+#define RTC_TR_MNT                           ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0                         ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1                         ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2                         ((uint32_t)0x00004000)
+#define RTC_TR_MNU                           ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0                         ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1                         ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2                         ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3                         ((uint32_t)0x00000800)
+#define RTC_TR_ST                            ((uint32_t)0x00000070)
+#define RTC_TR_ST_0                          ((uint32_t)0x00000010)
+#define RTC_TR_ST_1                          ((uint32_t)0x00000020)
+#define RTC_TR_ST_2                          ((uint32_t)0x00000040)
+#define RTC_TR_SU                            ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0                          ((uint32_t)0x00000001)
+#define RTC_TR_SU_1                          ((uint32_t)0x00000002)
+#define RTC_TR_SU_2                          ((uint32_t)0x00000004)
+#define RTC_TR_SU_3                          ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_DR register  *******************/
+#define RTC_DR_YT                            ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0                          ((uint32_t)0x00100000)
+#define RTC_DR_YT_1                          ((uint32_t)0x00200000)
+#define RTC_DR_YT_2                          ((uint32_t)0x00400000)
+#define RTC_DR_YT_3                          ((uint32_t)0x00800000)
+#define RTC_DR_YU                            ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0                          ((uint32_t)0x00010000)
+#define RTC_DR_YU_1                          ((uint32_t)0x00020000)
+#define RTC_DR_YU_2                          ((uint32_t)0x00040000)
+#define RTC_DR_YU_3                          ((uint32_t)0x00080000)
+#define RTC_DR_WDU                           ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0                         ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1                         ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2                         ((uint32_t)0x00008000)
+#define RTC_DR_MT                            ((uint32_t)0x00001000)
+#define RTC_DR_MU                            ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0                          ((uint32_t)0x00000100)
+#define RTC_DR_MU_1                          ((uint32_t)0x00000200)
+#define RTC_DR_MU_2                          ((uint32_t)0x00000400)
+#define RTC_DR_MU_3                          ((uint32_t)0x00000800)
+#define RTC_DR_DT                            ((uint32_t)0x00000030)
+#define RTC_DR_DT_0                          ((uint32_t)0x00000010)
+#define RTC_DR_DT_1                          ((uint32_t)0x00000020)
+#define RTC_DR_DU                            ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0                          ((uint32_t)0x00000001)
+#define RTC_DR_DU_1                          ((uint32_t)0x00000002)
+#define RTC_DR_DU_2                          ((uint32_t)0x00000004)
+#define RTC_DR_DU_3                          ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_CR register  *******************/
+#define RTC_CR_COE                           ((uint32_t)0x00800000)
+#define RTC_CR_OSEL                          ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0                        ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1                        ((uint32_t)0x00400000)
+#define RTC_CR_POL                           ((uint32_t)0x00100000)
+#define RTC_CR_COSEL                         ((uint32_t)0x00080000)
+#define RTC_CR_BCK                           ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H                         ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H                         ((uint32_t)0x00010000)
+#define RTC_CR_TSIE                          ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE                         ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE                        ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE                        ((uint32_t)0x00001000)
+#define RTC_CR_TSE                           ((uint32_t)0x00000800)
+#define RTC_CR_WUTE                          ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE                         ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE                         ((uint32_t)0x00000100)
+#define RTC_CR_DCE                           ((uint32_t)0x00000080)
+#define RTC_CR_FMT                           ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD                       ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON                       ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE                        ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL                       ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0                     ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1                     ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2                     ((uint32_t)0x00000004)
+
+/********************  Bits definition for RTC_ISR register  ******************/
+#define RTC_ISR_RECALPF                      ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP1F                       ((uint32_t)0x00002000)
+#define RTC_ISR_TAMP2F                       ((uint32_t)0x00004000)
+#define RTC_ISR_TSOVF                        ((uint32_t)0x00001000)
+#define RTC_ISR_TSF                          ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF                         ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF                        ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF                        ((uint32_t)0x00000100)
+#define RTC_ISR_INIT                         ((uint32_t)0x00000080)
+#define RTC_ISR_INITF                        ((uint32_t)0x00000040)
+#define RTC_ISR_RSF                          ((uint32_t)0x00000020)
+#define RTC_ISR_INITS                        ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF                         ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF                        ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF                       ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF                       ((uint32_t)0x00000001)
+
+/********************  Bits definition for RTC_PRER register  *****************/
+#define RTC_PRER_PREDIV_A                    ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S                    ((uint32_t)0x00007FFF)
+
+/********************  Bits definition for RTC_WUTR register  *****************/
+#define RTC_WUTR_WUT                         ((uint32_t)0x0000FFFF)
+
+/********************  Bits definition for RTC_CALIBR register  ***************/
+#define RTC_CALIBR_DCS                       ((uint32_t)0x00000080)
+#define RTC_CALIBR_DC                        ((uint32_t)0x0000001F)
+
+/********************  Bits definition for RTC_ALRMAR register  ***************/
+#define RTC_ALRMAR_MSK4                      ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL                     ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT                        ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0                      ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1                      ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU                        ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0                      ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1                      ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2                      ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3                      ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3                      ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM                        ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT                        ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0                      ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1                      ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU                        ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0                      ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1                      ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2                      ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3                      ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2                      ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT                       ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0                     ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1                     ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2                     ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU                       ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0                     ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1                     ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2                     ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3                     ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1                      ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST                        ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0                      ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1                      ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2                      ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU                        ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0                      ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1                      ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2                      ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3                      ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_ALRMBR register  ***************/
+#define RTC_ALRMBR_MSK4                      ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL                     ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT                        ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0                      ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1                      ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU                        ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0                      ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1                      ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2                      ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3                      ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3                      ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM                        ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT                        ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0                      ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1                      ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU                        ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0                      ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1                      ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2                      ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3                      ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2                      ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT                       ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0                     ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1                     ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2                     ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU                       ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0                     ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1                     ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2                     ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3                     ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1                      ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST                        ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0                      ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1                      ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2                      ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU                        ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0                      ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1                      ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2                      ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3                      ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_WPR register  ******************/
+#define RTC_WPR_KEY                          ((uint32_t)0x000000FF)
+
+/********************  Bits definition for RTC_SSR register  ******************/
+#define RTC_SSR_SS                           ((uint32_t)0x0000FFFF)
+
+/********************  Bits definition for RTC_SHIFTR register  ***************/
+#define RTC_SHIFTR_SUBFS                     ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S                     ((uint32_t)0x80000000)
+
+/********************  Bits definition for RTC_TSTR register  *****************/
+#define RTC_TSTR_PM                          ((uint32_t)0x00400000)
+#define RTC_TSTR_HT                          ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0                        ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1                        ((uint32_t)0x00200000)
+#define RTC_TSTR_HU                          ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0                        ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1                        ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2                        ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3                        ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT                         ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0                       ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1                       ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2                       ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU                         ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0                       ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1                       ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2                       ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3                       ((uint32_t)0x00000800)
+#define RTC_TSTR_ST                          ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0                        ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1                        ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2                        ((uint32_t)0x00000040)
+#define RTC_TSTR_SU                          ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0                        ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1                        ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2                        ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3                        ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_TSDR register  *****************/
+#define RTC_TSDR_WDU                         ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0                       ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1                       ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2                       ((uint32_t)0x00008000)
+#define RTC_TSDR_MT                          ((uint32_t)0x00001000)
+#define RTC_TSDR_MU                          ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0                        ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1                        ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2                        ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3                        ((uint32_t)0x00000800)
+#define RTC_TSDR_DT                          ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0                        ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1                        ((uint32_t)0x00000020)
+#define RTC_TSDR_DU                          ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0                        ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1                        ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2                        ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3                        ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_TSSSR register  ****************/
+#define RTC_TSSSR_SS                         ((uint32_t)0x0000FFFF)
+
+/********************  Bits definition for RTC_CAL register  *****************/
+#define RTC_CALR_CALP                        ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8                       ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16                      ((uint32_t)0x00002000)
+#define RTC_CALR_CALM                        ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0                      ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1                      ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2                      ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3                      ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4                      ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5                      ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6                      ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7                      ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8                      ((uint32_t)0x00000100)
+
+/********************  Bits definition for RTC_TAFCR register  ****************/
+#define RTC_TAFCR_ALARMOUTTYPE               ((uint32_t)0x00040000)
+#define RTC_TAFCR_TSINSEL                    ((uint32_t)0x00020000)
+#define RTC_TAFCR_TAMPINSEL                  ((uint32_t)0x00010000)
+#define RTC_TAFCR_TAMPPUDIS                  ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH                   ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0                 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1                 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT                    ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0                  ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1                  ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ                   ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0                 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1                 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2                 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS                     ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG                   ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E                     ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE                     ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG                   ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E                     ((uint32_t)0x00000001)
+
+/********************  Bits definition for RTC_ALRMASSR register  *************/
+#define RTC_ALRMASSR_MASKSS                  ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0                ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1                ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2                ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3                ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS                      ((uint32_t)0x00007FFF)
+
+/********************  Bits definition for RTC_ALRMBSSR register  *************/
+#define RTC_ALRMBSSR_MASKSS                  ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0                ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1                ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2                ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3                ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS                      ((uint32_t)0x00007FFF)
+
+/********************  Bits definition for RTC_BKP0R register  ****************/
+#define RTC_BKP0R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP1R register  ****************/
+#define RTC_BKP1R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP2R register  ****************/
+#define RTC_BKP2R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP3R register  ****************/
+#define RTC_BKP3R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP4R register  ****************/
+#define RTC_BKP4R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP5R register  ****************/
+#define RTC_BKP5R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP6R register  ****************/
+#define RTC_BKP6R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP7R register  ****************/
+#define RTC_BKP7R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP8R register  ****************/
+#define RTC_BKP8R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP9R register  ****************/
+#define RTC_BKP9R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP10R register  ***************/
+#define RTC_BKP10R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP11R register  ***************/
+#define RTC_BKP11R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP12R register  ***************/
+#define RTC_BKP12R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP13R register  ***************/
+#define RTC_BKP13R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP14R register  ***************/
+#define RTC_BKP14R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP15R register  ***************/
+#define RTC_BKP15R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP16R register  ***************/
+#define RTC_BKP16R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP17R register  ***************/
+#define RTC_BKP17R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP18R register  ***************/
+#define RTC_BKP18R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP19R register  ***************/
+#define RTC_BKP19R                           ((uint32_t)0xFFFFFFFF)
+
+/******************************************************************************/
+/*                                                                            */
+/*                          Serial Audio Interface                            */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for SAI_GCR register  *******************/
+#define  SAI_GCR_SYNCIN                  ((uint32_t)0x00000003)        /*!<SYNCIN[1:0] bits (Synchronization Inputs)   */
+#define  SAI_GCR_SYNCIN_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_GCR_SYNCIN_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  SAI_GCR_SYNCOUT                 ((uint32_t)0x00000030)        /*!<SYNCOUT[1:0] bits (Synchronization Outputs) */
+#define  SAI_GCR_SYNCOUT_0               ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  SAI_GCR_SYNCOUT_1               ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+/*******************  Bit definition for SAI_xCR1 register  *******************/
+#define  SAI_xCR1_MODE                    ((uint32_t)0x00000003)        /*!<MODE[1:0] bits (Audio Block Mode)           */
+#define  SAI_xCR1_MODE_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_xCR1_MODE_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  SAI_xCR1_PRTCFG                  ((uint32_t)0x0000000C)        /*!<PRTCFG[1:0] bits (Protocol Configuration)   */
+#define  SAI_xCR1_PRTCFG_0                ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  SAI_xCR1_PRTCFG_1                ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  SAI_xCR1_DS                      ((uint32_t)0x000000E0)        /*!<DS[1:0] bits (Data Size) */
+#define  SAI_xCR1_DS_0                    ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  SAI_xCR1_DS_1                    ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  SAI_xCR1_DS_2                    ((uint32_t)0x00000080)        /*!<Bit 2 */
+
+#define  SAI_xCR1_LSBFIRST                ((uint32_t)0x00000100)        /*!<LSB First Configuration  */
+#define  SAI_xCR1_CKSTR                   ((uint32_t)0x00000200)        /*!<ClocK STRobing edge      */
+
+#define  SAI_xCR1_SYNCEN                  ((uint32_t)0x00000C00)        /*!<SYNCEN[1:0](SYNChronization ENable) */
+#define  SAI_xCR1_SYNCEN_0                ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  SAI_xCR1_SYNCEN_1                ((uint32_t)0x00000800)        /*!<Bit 1 */
+
+#define  SAI_xCR1_MONO                    ((uint32_t)0x00001000)        /*!<Mono mode                  */
+#define  SAI_xCR1_OUTDRIV                 ((uint32_t)0x00002000)        /*!<Output Drive               */
+#define  SAI_xCR1_SAIEN                   ((uint32_t)0x00010000)        /*!<Audio Block enable         */
+#define  SAI_xCR1_DMAEN                   ((uint32_t)0x00020000)        /*!<DMA enable                 */
+#define  SAI_xCR1_NODIV                   ((uint32_t)0x00080000)        /*!<No Divider Configuration   */
+
+#define  SAI_xCR1_MCKDIV                  ((uint32_t)0x00F00000)        /*!<MCKDIV[3:0] (Master ClocK Divider)  */
+#define  SAI_xCR1_MCKDIV_0                ((uint32_t)0x00100000)        /*!<Bit 0  */
+#define  SAI_xCR1_MCKDIV_1                ((uint32_t)0x00200000)        /*!<Bit 1  */
+#define  SAI_xCR1_MCKDIV_2                ((uint32_t)0x00400000)        /*!<Bit 2  */
+#define  SAI_xCR1_MCKDIV_3                ((uint32_t)0x00800000)        /*!<Bit 3  */
+
+/*******************  Bit definition for SAI_xCR2 register  *******************/
+#define  SAI_xCR2_FTH                     ((uint32_t)0x00000007)        /*!<FTH[2:0](Fifo THreshold)  */
+#define  SAI_xCR2_FTH_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_xCR2_FTH_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  SAI_xCR2_FTH_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+
+#define  SAI_xCR2_FFLUSH                  ((uint32_t)0x00000008)        /*!<Fifo FLUSH                       */
+#define  SAI_xCR2_TRIS                    ((uint32_t)0x00000010)        /*!<TRIState Management on data line */
+#define  SAI_xCR2_MUTE                    ((uint32_t)0x00000020)        /*!<Mute mode                        */
+#define  SAI_xCR2_MUTEVAL                 ((uint32_t)0x00000040)        /*!<Muate value                      */
+
+#define  SAI_xCR2_MUTECNT                  ((uint32_t)0x00001F80)       /*!<MUTECNT[5:0] (MUTE counter) */
+#define  SAI_xCR2_MUTECNT_0               ((uint32_t)0x00000080)        /*!<Bit 0 */
+#define  SAI_xCR2_MUTECNT_1               ((uint32_t)0x00000100)        /*!<Bit 1 */
+#define  SAI_xCR2_MUTECNT_2               ((uint32_t)0x00000200)        /*!<Bit 2 */
+#define  SAI_xCR2_MUTECNT_3               ((uint32_t)0x00000400)        /*!<Bit 3 */
+#define  SAI_xCR2_MUTECNT_4               ((uint32_t)0x00000800)        /*!<Bit 4 */
+#define  SAI_xCR2_MUTECNT_5               ((uint32_t)0x00001000)        /*!<Bit 5 */
+
+#define  SAI_xCR2_CPL                     ((uint32_t)0x00080000)        /*!< Complement Bit             */
+
+#define  SAI_xCR2_COMP                    ((uint32_t)0x0000C000)        /*!<COMP[1:0] (Companding mode) */
+#define  SAI_xCR2_COMP_0                  ((uint32_t)0x00004000)        /*!<Bit 0 */
+#define  SAI_xCR2_COMP_1                  ((uint32_t)0x00008000)        /*!<Bit 1 */
+
+/******************  Bit definition for SAI_xFRCR register  *******************/
+#define  SAI_xFRCR_FRL                    ((uint32_t)0x000000FF)        /*!<FRL[1:0](Frame length)  */
+#define  SAI_xFRCR_FRL_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_xFRCR_FRL_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  SAI_xFRCR_FRL_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  SAI_xFRCR_FRL_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  SAI_xFRCR_FRL_4                  ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  SAI_xFRCR_FRL_5                  ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  SAI_xFRCR_FRL_6                  ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  SAI_xFRCR_FRL_7                  ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  SAI_xFRCR_FSALL                  ((uint32_t)0x00007F00)        /*!<FRL[1:0] (Frame synchronization active level length)  */
+#define  SAI_xFRCR_FSALL_0                ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  SAI_xFRCR_FSALL_1                ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  SAI_xFRCR_FSALL_2                ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  SAI_xFRCR_FSALL_3                ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  SAI_xFRCR_FSALL_4                ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  SAI_xFRCR_FSALL_5                ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  SAI_xFRCR_FSALL_6                ((uint32_t)0x00004000)        /*!<Bit 6 */
+
+#define  SAI_xFRCR_FSDEF                  ((uint32_t)0x00010000)        /*!< Frame Synchronization Definition */
+#define  SAI_xFRCR_FSPO                   ((uint32_t)0x00020000)        /*!<Frame Synchronization POLarity    */
+#define  SAI_xFRCR_FSOFF                  ((uint32_t)0x00040000)        /*!<Frame Synchronization OFFset      */
+
+/******************  Bit definition for SAI_xSLOTR register  *******************/
+#define  SAI_xSLOTR_FBOFF                 ((uint32_t)0x0000001F)        /*!<FRL[4:0](First Bit Offset)  */
+#define  SAI_xSLOTR_FBOFF_0               ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_xSLOTR_FBOFF_1               ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  SAI_xSLOTR_FBOFF_2               ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  SAI_xSLOTR_FBOFF_3               ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  SAI_xSLOTR_FBOFF_4               ((uint32_t)0x00000010)        /*!<Bit 4 */
+
+#define  SAI_xSLOTR_SLOTSZ                ((uint32_t)0x000000C0)        /*!<SLOTSZ[1:0] (Slot size)  */
+#define  SAI_xSLOTR_SLOTSZ_0              ((uint32_t)0x00000040)        /*!<Bit 0 */
+#define  SAI_xSLOTR_SLOTSZ_1              ((uint32_t)0x00000080)        /*!<Bit 1 */
+
+#define  SAI_xSLOTR_NBSLOT                ((uint32_t)0x00000F00)        /*!<NBSLOT[3:0] (Number of Slot in audio Frame)  */
+#define  SAI_xSLOTR_NBSLOT_0              ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  SAI_xSLOTR_NBSLOT_1              ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  SAI_xSLOTR_NBSLOT_2              ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  SAI_xSLOTR_NBSLOT_3              ((uint32_t)0x00000800)        /*!<Bit 3 */
+
+#define  SAI_xSLOTR_SLOTEN                ((uint32_t)0xFFFF0000)        /*!<SLOTEN[15:0] (Slot Enable)  */
+
+/*******************  Bit definition for SAI_xIMR register  *******************/
+#define  SAI_xIMR_OVRUDRIE                ((uint32_t)0x00000001)        /*!<Overrun underrun interrupt enable                              */
+#define  SAI_xIMR_MUTEDETIE               ((uint32_t)0x00000002)        /*!<Mute detection interrupt enable                                */
+#define  SAI_xIMR_WCKCFGIE                ((uint32_t)0x00000004)        /*!<Wrong Clock Configuration interrupt enable                     */
+#define  SAI_xIMR_FREQIE                  ((uint32_t)0x00000008)        /*!<FIFO request interrupt enable                                  */
+#define  SAI_xIMR_CNRDYIE                 ((uint32_t)0x00000010)        /*!<Codec not ready interrupt enable                               */
+#define  SAI_xIMR_AFSDETIE                ((uint32_t)0x00000020)        /*!<Anticipated frame synchronization detection interrupt enable   */
+#define  SAI_xIMR_LFSDETIE                ((uint32_t)0x00000040)        /*!<Late frame synchronization detection interrupt enable          */
+
+/********************  Bit definition for SAI_xSR register  *******************/
+#define  SAI_xSR_OVRUDR                   ((uint32_t)0x00000001)         /*!<Overrun underrun                               */
+#define  SAI_xSR_MUTEDET                  ((uint32_t)0x00000002)         /*!<Mute detection                                 */
+#define  SAI_xSR_WCKCFG                   ((uint32_t)0x00000004)         /*!<Wrong Clock Configuration                      */
+#define  SAI_xSR_FREQ                     ((uint32_t)0x00000008)         /*!<FIFO request                                   */
+#define  SAI_xSR_CNRDY                    ((uint32_t)0x00000010)         /*!<Codec not ready                                */
+#define  SAI_xSR_AFSDET                   ((uint32_t)0x00000020)         /*!<Anticipated frame synchronization detection    */
+#define  SAI_xSR_LFSDET                   ((uint32_t)0x00000040)         /*!<Late frame synchronization detection           */
+
+#define  SAI_xSR_FLVL                     ((uint32_t)0x00070000)         /*!<FLVL[2:0] (FIFO Level Threshold)               */
+#define  SAI_xSR_FLVL_0                   ((uint32_t)0x00010000)         /*!<Bit 0 */
+#define  SAI_xSR_FLVL_1                   ((uint32_t)0x00020000)         /*!<Bit 1 */
+#define  SAI_xSR_FLVL_2                   ((uint32_t)0x00040000)         /*!<Bit 2 */
+
+/******************  Bit definition for SAI_xCLRFR register  ******************/
+#define  SAI_xCLRFR_COVRUDR               ((uint32_t)0x00000001)        /*!<Clear Overrun underrun                               */
+#define  SAI_xCLRFR_CMUTEDET              ((uint32_t)0x00000002)        /*!<Clear Mute detection                                 */
+#define  SAI_xCLRFR_CWCKCFG               ((uint32_t)0x00000004)        /*!<Clear Wrong Clock Configuration                      */
+#define  SAI_xCLRFR_CFREQ                 ((uint32_t)0x00000008)        /*!<Clear FIFO request                                   */
+#define  SAI_xCLRFR_CCNRDY                ((uint32_t)0x00000010)        /*!<Clear Codec not ready                                */
+#define  SAI_xCLRFR_CAFSDET               ((uint32_t)0x00000020)        /*!<Clear Anticipated frame synchronization detection    */
+#define  SAI_xCLRFR_CLFSDET               ((uint32_t)0x00000040)        /*!<Clear Late frame synchronization detection           */
+
+/******************  Bit definition for SAI_xDR register  ******************/
+#define  SAI_xDR_DATA                     ((uint32_t)0xFFFFFFFF)
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                          SD host Interface                                 */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for SDIO_POWER register  ******************/
+#define  SDIO_POWER_PWRCTRL                  ((uint32_t)0x03)               /*!<PWRCTRL[1:0] bits (Power supply control bits) */
+#define  SDIO_POWER_PWRCTRL_0                ((uint32_t)0x01)               /*!<Bit 0 */
+#define  SDIO_POWER_PWRCTRL_1                ((uint32_t)0x02)               /*!<Bit 1 */
+
+/******************  Bit definition for SDIO_CLKCR register  ******************/
+#define  SDIO_CLKCR_CLKDIV                   ((uint32_t)0x00FF)            /*!<Clock divide factor             */
+#define  SDIO_CLKCR_CLKEN                    ((uint32_t)0x0100)            /*!<Clock enable bit                */
+#define  SDIO_CLKCR_PWRSAV                   ((uint32_t)0x0200)            /*!<Power saving configuration bit  */
+#define  SDIO_CLKCR_BYPASS                   ((uint32_t)0x0400)            /*!<Clock divider bypass enable bit */
+
+#define  SDIO_CLKCR_WIDBUS                   ((uint32_t)0x1800)            /*!<WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define  SDIO_CLKCR_WIDBUS_0                 ((uint32_t)0x0800)            /*!<Bit 0 */
+#define  SDIO_CLKCR_WIDBUS_1                 ((uint32_t)0x1000)            /*!<Bit 1 */
+
+#define  SDIO_CLKCR_NEGEDGE                  ((uint32_t)0x2000)            /*!<SDIO_CK dephasing selection bit */
+#define  SDIO_CLKCR_HWFC_EN                  ((uint32_t)0x4000)            /*!<HW Flow Control enable          */
+
+/*******************  Bit definition for SDIO_ARG register  *******************/
+#define  SDIO_ARG_CMDARG                     ((uint32_t)0xFFFFFFFF)            /*!<Command argument */
+
+/*******************  Bit definition for SDIO_CMD register  *******************/
+#define  SDIO_CMD_CMDINDEX                   ((uint32_t)0x003F)            /*!<Command Index                               */
+
+#define  SDIO_CMD_WAITRESP                   ((uint32_t)0x00C0)            /*!<WAITRESP[1:0] bits (Wait for response bits) */
+#define  SDIO_CMD_WAITRESP_0                 ((uint32_t)0x0040)            /*!< Bit 0 */
+#define  SDIO_CMD_WAITRESP_1                 ((uint32_t)0x0080)            /*!< Bit 1 */
+
+#define  SDIO_CMD_WAITINT                    ((uint32_t)0x0100)            /*!<CPSM Waits for Interrupt Request                               */
+#define  SDIO_CMD_WAITPEND                   ((uint32_t)0x0200)            /*!<CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define  SDIO_CMD_CPSMEN                     ((uint32_t)0x0400)            /*!<Command path state machine (CPSM) Enable bit                   */
+#define  SDIO_CMD_SDIOSUSPEND                ((uint32_t)0x0800)            /*!<SD I/O suspend command                                         */
+#define  SDIO_CMD_ENCMDCOMPL                 ((uint32_t)0x1000)            /*!<Enable CMD completion                                          */
+#define  SDIO_CMD_NIEN                       ((uint32_t)0x2000)            /*!<Not Interrupt Enable */
+#define  SDIO_CMD_CEATACMD                   ((uint32_t)0x4000)            /*!<CE-ATA command       */
+
+/*****************  Bit definition for SDIO_RESPCMD register  *****************/
+#define  SDIO_RESPCMD_RESPCMD                ((uint32_t)0x3F)               /*!<Response command index */
+
+/******************  Bit definition for SDIO_RESP0 register  ******************/
+#define  SDIO_RESP0_CARDSTATUS0              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDIO_RESP1 register  ******************/
+#define  SDIO_RESP1_CARDSTATUS1              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDIO_RESP2 register  ******************/
+#define  SDIO_RESP2_CARDSTATUS2              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDIO_RESP3 register  ******************/
+#define  SDIO_RESP3_CARDSTATUS3              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDIO_RESP4 register  ******************/
+#define  SDIO_RESP4_CARDSTATUS4              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDIO_DTIMER register  *****************/
+#define  SDIO_DTIMER_DATATIME                ((uint32_t)0xFFFFFFFF)        /*!<Data timeout period. */
+
+/******************  Bit definition for SDIO_DLEN register  *******************/
+#define  SDIO_DLEN_DATALENGTH                ((uint32_t)0x01FFFFFF)        /*!<Data length value    */
+
+/******************  Bit definition for SDIO_DCTRL register  ******************/
+#define  SDIO_DCTRL_DTEN                     ((uint32_t)0x0001)            /*!<Data transfer enabled bit         */
+#define  SDIO_DCTRL_DTDIR                    ((uint32_t)0x0002)            /*!<Data transfer direction selection */
+#define  SDIO_DCTRL_DTMODE                   ((uint32_t)0x0004)            /*!<Data transfer mode selection      */
+#define  SDIO_DCTRL_DMAEN                    ((uint32_t)0x0008)            /*!<DMA enabled bit                   */
+
+#define  SDIO_DCTRL_DBLOCKSIZE               ((uint32_t)0x00F0)            /*!<DBLOCKSIZE[3:0] bits (Data block size) */
+#define  SDIO_DCTRL_DBLOCKSIZE_0             ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  SDIO_DCTRL_DBLOCKSIZE_1             ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  SDIO_DCTRL_DBLOCKSIZE_2             ((uint32_t)0x0040)            /*!<Bit 2 */
+#define  SDIO_DCTRL_DBLOCKSIZE_3             ((uint32_t)0x0080)            /*!<Bit 3 */
+
+#define  SDIO_DCTRL_RWSTART                  ((uint32_t)0x0100)            /*!<Read wait start         */
+#define  SDIO_DCTRL_RWSTOP                   ((uint32_t)0x0200)            /*!<Read wait stop          */
+#define  SDIO_DCTRL_RWMOD                    ((uint32_t)0x0400)            /*!<Read wait mode          */
+#define  SDIO_DCTRL_SDIOEN                   ((uint32_t)0x0800)            /*!<SD I/O enable functions */
+
+/******************  Bit definition for SDIO_DCOUNT register  *****************/
+#define  SDIO_DCOUNT_DATACOUNT               ((uint32_t)0x01FFFFFF)        /*!<Data count value */
+
+/******************  Bit definition for SDIO_STA register  ********************/
+#define  SDIO_STA_CCRCFAIL                   ((uint32_t)0x00000001)        /*!<Command response received (CRC check failed)  */
+#define  SDIO_STA_DCRCFAIL                   ((uint32_t)0x00000002)        /*!<Data block sent/received (CRC check failed)   */
+#define  SDIO_STA_CTIMEOUT                   ((uint32_t)0x00000004)        /*!<Command response timeout                      */
+#define  SDIO_STA_DTIMEOUT                   ((uint32_t)0x00000008)        /*!<Data timeout                                  */
+#define  SDIO_STA_TXUNDERR                   ((uint32_t)0x00000010)        /*!<Transmit FIFO underrun error                  */
+#define  SDIO_STA_RXOVERR                    ((uint32_t)0x00000020)        /*!<Received FIFO overrun error                   */
+#define  SDIO_STA_CMDREND                    ((uint32_t)0x00000040)        /*!<Command response received (CRC check passed)  */
+#define  SDIO_STA_CMDSENT                    ((uint32_t)0x00000080)        /*!<Command sent (no response required)           */
+#define  SDIO_STA_DATAEND                    ((uint32_t)0x00000100)        /*!<Data end (data counter, SDIDCOUNT, is zero)   */
+#define  SDIO_STA_STBITERR                   ((uint32_t)0x00000200)        /*!<Start bit not detected on all data signals in wide bus mode */
+#define  SDIO_STA_DBCKEND                    ((uint32_t)0x00000400)        /*!<Data block sent/received (CRC check passed)   */
+#define  SDIO_STA_CMDACT                     ((uint32_t)0x00000800)        /*!<Command transfer in progress                  */
+#define  SDIO_STA_TXACT                      ((uint32_t)0x00001000)        /*!<Data transmit in progress                     */
+#define  SDIO_STA_RXACT                      ((uint32_t)0x00002000)        /*!<Data receive in progress                      */
+#define  SDIO_STA_TXFIFOHE                   ((uint32_t)0x00004000)        /*!<Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define  SDIO_STA_RXFIFOHF                   ((uint32_t)0x00008000)        /*!<Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define  SDIO_STA_TXFIFOF                    ((uint32_t)0x00010000)        /*!<Transmit FIFO full                            */
+#define  SDIO_STA_RXFIFOF                    ((uint32_t)0x00020000)        /*!<Receive FIFO full                             */
+#define  SDIO_STA_TXFIFOE                    ((uint32_t)0x00040000)        /*!<Transmit FIFO empty                           */
+#define  SDIO_STA_RXFIFOE                    ((uint32_t)0x00080000)        /*!<Receive FIFO empty                            */
+#define  SDIO_STA_TXDAVL                     ((uint32_t)0x00100000)        /*!<Data available in transmit FIFO               */
+#define  SDIO_STA_RXDAVL                     ((uint32_t)0x00200000)        /*!<Data available in receive FIFO                */
+#define  SDIO_STA_SDIOIT                     ((uint32_t)0x00400000)        /*!<SDIO interrupt received                       */
+#define  SDIO_STA_CEATAEND                   ((uint32_t)0x00800000)        /*!<CE-ATA command completion signal received for CMD61 */
+
+/*******************  Bit definition for SDIO_ICR register  *******************/
+#define  SDIO_ICR_CCRCFAILC                  ((uint32_t)0x00000001)        /*!<CCRCFAIL flag clear bit */
+#define  SDIO_ICR_DCRCFAILC                  ((uint32_t)0x00000002)        /*!<DCRCFAIL flag clear bit */
+#define  SDIO_ICR_CTIMEOUTC                  ((uint32_t)0x00000004)        /*!<CTIMEOUT flag clear bit */
+#define  SDIO_ICR_DTIMEOUTC                  ((uint32_t)0x00000008)        /*!<DTIMEOUT flag clear bit */
+#define  SDIO_ICR_TXUNDERRC                  ((uint32_t)0x00000010)        /*!<TXUNDERR flag clear bit */
+#define  SDIO_ICR_RXOVERRC                   ((uint32_t)0x00000020)        /*!<RXOVERR flag clear bit  */
+#define  SDIO_ICR_CMDRENDC                   ((uint32_t)0x00000040)        /*!<CMDREND flag clear bit  */
+#define  SDIO_ICR_CMDSENTC                   ((uint32_t)0x00000080)        /*!<CMDSENT flag clear bit  */
+#define  SDIO_ICR_DATAENDC                   ((uint32_t)0x00000100)        /*!<DATAEND flag clear bit  */
+#define  SDIO_ICR_STBITERRC                  ((uint32_t)0x00000200)        /*!<STBITERR flag clear bit */
+#define  SDIO_ICR_DBCKENDC                   ((uint32_t)0x00000400)        /*!<DBCKEND flag clear bit  */
+#define  SDIO_ICR_SDIOITC                    ((uint32_t)0x00400000)        /*!<SDIOIT flag clear bit   */
+#define  SDIO_ICR_CEATAENDC                  ((uint32_t)0x00800000)        /*!<CEATAEND flag clear bit */
+
+/******************  Bit definition for SDIO_MASK register  *******************/
+#define  SDIO_MASK_CCRCFAILIE                ((uint32_t)0x00000001)        /*!<Command CRC Fail Interrupt Enable          */
+#define  SDIO_MASK_DCRCFAILIE                ((uint32_t)0x00000002)        /*!<Data CRC Fail Interrupt Enable             */
+#define  SDIO_MASK_CTIMEOUTIE                ((uint32_t)0x00000004)        /*!<Command TimeOut Interrupt Enable           */
+#define  SDIO_MASK_DTIMEOUTIE                ((uint32_t)0x00000008)        /*!<Data TimeOut Interrupt Enable              */
+#define  SDIO_MASK_TXUNDERRIE                ((uint32_t)0x00000010)        /*!<Tx FIFO UnderRun Error Interrupt Enable    */
+#define  SDIO_MASK_RXOVERRIE                 ((uint32_t)0x00000020)        /*!<Rx FIFO OverRun Error Interrupt Enable     */
+#define  SDIO_MASK_CMDRENDIE                 ((uint32_t)0x00000040)        /*!<Command Response Received Interrupt Enable */
+#define  SDIO_MASK_CMDSENTIE                 ((uint32_t)0x00000080)        /*!<Command Sent Interrupt Enable              */
+#define  SDIO_MASK_DATAENDIE                 ((uint32_t)0x00000100)        /*!<Data End Interrupt Enable                  */
+#define  SDIO_MASK_STBITERRIE                ((uint32_t)0x00000200)        /*!<Start Bit Error Interrupt Enable           */
+#define  SDIO_MASK_DBCKENDIE                 ((uint32_t)0x00000400)        /*!<Data Block End Interrupt Enable            */
+#define  SDIO_MASK_CMDACTIE                  ((uint32_t)0x00000800)        /*!<CCommand Acting Interrupt Enable           */
+#define  SDIO_MASK_TXACTIE                   ((uint32_t)0x00001000)        /*!<Data Transmit Acting Interrupt Enable      */
+#define  SDIO_MASK_RXACTIE                   ((uint32_t)0x00002000)        /*!<Data receive acting interrupt enabled      */
+#define  SDIO_MASK_TXFIFOHEIE                ((uint32_t)0x00004000)        /*!<Tx FIFO Half Empty interrupt Enable        */
+#define  SDIO_MASK_RXFIFOHFIE                ((uint32_t)0x00008000)        /*!<Rx FIFO Half Full interrupt Enable         */
+#define  SDIO_MASK_TXFIFOFIE                 ((uint32_t)0x00010000)        /*!<Tx FIFO Full interrupt Enable              */
+#define  SDIO_MASK_RXFIFOFIE                 ((uint32_t)0x00020000)        /*!<Rx FIFO Full interrupt Enable              */
+#define  SDIO_MASK_TXFIFOEIE                 ((uint32_t)0x00040000)        /*!<Tx FIFO Empty interrupt Enable             */
+#define  SDIO_MASK_RXFIFOEIE                 ((uint32_t)0x00080000)        /*!<Rx FIFO Empty interrupt Enable             */
+#define  SDIO_MASK_TXDAVLIE                  ((uint32_t)0x00100000)        /*!<Data available in Tx FIFO interrupt Enable */
+#define  SDIO_MASK_RXDAVLIE                  ((uint32_t)0x00200000)        /*!<Data available in Rx FIFO interrupt Enable */
+#define  SDIO_MASK_SDIOITIE                  ((uint32_t)0x00400000)        /*!<SDIO Mode Interrupt Received interrupt Enable */
+#define  SDIO_MASK_CEATAENDIE                ((uint32_t)0x00800000)        /*!<CE-ATA command completion signal received Interrupt Enable */
+
+/*****************  Bit definition for SDIO_FIFOCNT register  *****************/
+#define  SDIO_FIFOCNT_FIFOCOUNT              ((uint32_t)0x00FFFFFF)        /*!<Remaining number of words to be written to or read from the FIFO */
+
+/******************  Bit definition for SDIO_FIFO register  *******************/
+#define  SDIO_FIFO_FIFODATA                  ((uint32_t)0xFFFFFFFF)        /*!<Receive and transmit FIFO data */
+
+/******************************************************************************/
+/*                                                                            */
+/*                        Serial Peripheral Interface                         */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for SPI_CR1 register  ********************/
+#define  SPI_CR1_CPHA                        ((uint32_t)0x00000001)            /*!<Clock Phase      */
+#define  SPI_CR1_CPOL                        ((uint32_t)0x00000002)            /*!<Clock Polarity   */
+#define  SPI_CR1_MSTR                        ((uint32_t)0x00000004)            /*!<Master Selection */
+
+#define  SPI_CR1_BR                          ((uint32_t)0x00000038)            /*!<BR[2:0] bits (Baud Rate Control) */
+#define  SPI_CR1_BR_0                        ((uint32_t)0x00000008)            /*!<Bit 0 */
+#define  SPI_CR1_BR_1                        ((uint32_t)0x00000010)            /*!<Bit 1 */
+#define  SPI_CR1_BR_2                        ((uint32_t)0x00000020)            /*!<Bit 2 */
+
+#define  SPI_CR1_SPE                         ((uint32_t)0x00000040)            /*!<SPI Enable                          */
+#define  SPI_CR1_LSBFIRST                    ((uint32_t)0x00000080)            /*!<Frame Format                        */
+#define  SPI_CR1_SSI                         ((uint32_t)0x00000100)            /*!<Internal slave select               */
+#define  SPI_CR1_SSM                         ((uint32_t)0x00000200)            /*!<Software slave management           */
+#define  SPI_CR1_RXONLY                      ((uint32_t)0x00000400)            /*!<Receive only                        */
+#define  SPI_CR1_DFF                         ((uint32_t)0x00000800)            /*!<Data Frame Format                   */
+#define  SPI_CR1_CRCNEXT                     ((uint32_t)0x00001000)            /*!<Transmit CRC next                   */
+#define  SPI_CR1_CRCEN                       ((uint32_t)0x00002000)            /*!<Hardware CRC calculation enable     */
+#define  SPI_CR1_BIDIOE                      ((uint32_t)0x00004000)            /*!<Output enable in bidirectional mode */
+#define  SPI_CR1_BIDIMODE                    ((uint32_t)0x00008000)            /*!<Bidirectional data mode enable      */
+
+/*******************  Bit definition for SPI_CR2 register  ********************/
+#define  SPI_CR2_RXDMAEN                     ((uint32_t)0x00000001)               /*!<Rx Buffer DMA Enable                 */
+#define  SPI_CR2_TXDMAEN                     ((uint32_t)0x00000002)               /*!<Tx Buffer DMA Enable                 */
+#define  SPI_CR2_SSOE                        ((uint32_t)0x00000004)               /*!<SS Output Enable                     */
+#define  SPI_CR2_FRF                         ((uint32_t)0x00000010)               /*!<Frame Format                         */
+#define  SPI_CR2_ERRIE                       ((uint32_t)0x00000020)               /*!<Error Interrupt Enable               */
+#define  SPI_CR2_RXNEIE                      ((uint32_t)0x00000040)               /*!<RX buffer Not Empty Interrupt Enable */
+#define  SPI_CR2_TXEIE                       ((uint32_t)0x00000080)               /*!<Tx buffer Empty Interrupt Enable     */
+
+/********************  Bit definition for SPI_SR register  ********************/
+#define  SPI_SR_RXNE                         ((uint32_t)0x00000001)               /*!<Receive buffer Not Empty */
+#define  SPI_SR_TXE                          ((uint32_t)0x00000002)               /*!<Transmit buffer Empty    */
+#define  SPI_SR_CHSIDE                       ((uint32_t)0x00000004)               /*!<Channel side             */
+#define  SPI_SR_UDR                          ((uint32_t)0x00000008)               /*!<Underrun flag            */
+#define  SPI_SR_CRCERR                       ((uint32_t)0x00000010)               /*!<CRC Error flag           */
+#define  SPI_SR_MODF                         ((uint32_t)0x00000020)               /*!<Mode fault               */
+#define  SPI_SR_OVR                          ((uint32_t)0x00000040)               /*!<Overrun flag             */
+#define  SPI_SR_BSY                          ((uint32_t)0x00000080)               /*!<Busy flag                */
+#define  SPI_SR_FRE                          ((uint32_t)0x00000100)               /*!<Frame format error flag  */
+
+/********************  Bit definition for SPI_DR register  ********************/
+#define  SPI_DR_DR                           ((uint32_t)0x0000FFFF)            /*!<Data Register           */
+
+/*******************  Bit definition for SPI_CRCPR register  ******************/
+#define  SPI_CRCPR_CRCPOLY                   ((uint32_t)0x0000FFFF)            /*!<CRC polynomial register */
+
+/******************  Bit definition for SPI_RXCRCR register  ******************/
+#define  SPI_RXCRCR_RXCRC                    ((uint32_t)0x0000FFFF)            /*!<Rx CRC Register         */
+
+/******************  Bit definition for SPI_TXCRCR register  ******************/
+#define  SPI_TXCRCR_TXCRC                    ((uint32_t)0x0000FFFF)            /*!<Tx CRC Register         */
+
+/******************  Bit definition for SPI_I2SCFGR register  *****************/
+#define  SPI_I2SCFGR_CHLEN                   ((uint32_t)0x00000001)            /*!<Channel length (number of bits per audio channel) */
+
+#define  SPI_I2SCFGR_DATLEN                  ((uint32_t)0x00000006)            /*!<DATLEN[1:0] bits (Data length to be transferred)  */
+#define  SPI_I2SCFGR_DATLEN_0                ((uint32_t)0x00000002)            /*!<Bit 0 */
+#define  SPI_I2SCFGR_DATLEN_1                ((uint32_t)0x00000004)            /*!<Bit 1 */
+
+#define  SPI_I2SCFGR_CKPOL                   ((uint32_t)0x00000008)            /*!<steady state clock polarity               */
+
+#define  SPI_I2SCFGR_I2SSTD                  ((uint32_t)0x00000030)            /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define  SPI_I2SCFGR_I2SSTD_0                ((uint32_t)0x00000010)            /*!<Bit 0 */
+#define  SPI_I2SCFGR_I2SSTD_1                ((uint32_t)0x00000020)            /*!<Bit 1 */
+
+#define  SPI_I2SCFGR_PCMSYNC                 ((uint32_t)0x00000080)            /*!<PCM frame synchronization                 */
+
+#define  SPI_I2SCFGR_I2SCFG                  ((uint32_t)0x00000300)            /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define  SPI_I2SCFGR_I2SCFG_0                ((uint32_t)0x00000100)            /*!<Bit 0 */
+#define  SPI_I2SCFGR_I2SCFG_1                ((uint32_t)0x00000200)            /*!<Bit 1 */
+
+#define  SPI_I2SCFGR_I2SE                    ((uint32_t)0x00000400)            /*!<I2S Enable         */
+#define  SPI_I2SCFGR_I2SMOD                  ((uint32_t)0x00000800)            /*!<I2S mode selection */
+
+/******************  Bit definition for SPI_I2SPR register  *******************/
+#define  SPI_I2SPR_I2SDIV                    ((uint32_t)0x000000FF)            /*!<I2S Linear prescaler         */
+#define  SPI_I2SPR_ODD                       ((uint32_t)0x00000100)            /*!<Odd factor for the prescaler */
+#define  SPI_I2SPR_MCKOE                     ((uint32_t)0x00000200)            /*!<Master Clock Output Enable   */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                 SYSCFG                                     */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for SYSCFG_MEMRMP register  ***************/
+#define SYSCFG_MEMRMP_MEM_MODE          ((uint32_t)0x00000007) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_MEMRMP_MEM_MODE_0        ((uint32_t)0x00000001)
+#define SYSCFG_MEMRMP_MEM_MODE_1        ((uint32_t)0x00000002)
+#define SYSCFG_MEMRMP_MEM_MODE_2        ((uint32_t)0x00000004)
+
+#define SYSCFG_MEMRMP_UFB_MODE          ((uint32_t)0x00000100) /*!< User Flash Bank mode    */
+#define SYSCFG_SWP_FMC                  ((uint32_t)0x00000C00) /*!< FMC memory mapping swap */
+
+/******************  Bit definition for SYSCFG_PMC register  ******************/
+#define SYSCFG_PMC_ADCxDC2              ((uint32_t)0x00070000) /*!< Refer to AN4073 on how to use this bit  */
+#define SYSCFG_PMC_ADC1DC2              ((uint32_t)0x00010000) /*!< Refer to AN4073 on how to use this bit  */
+#define SYSCFG_PMC_ADC2DC2              ((uint32_t)0x00020000) /*!< Refer to AN4073 on how to use this bit  */
+#define SYSCFG_PMC_ADC3DC2              ((uint32_t)0x00040000) /*!< Refer to AN4073 on how to use this bit  */
+
+#define SYSCFG_PMC_MII_RMII_SEL         ((uint32_t)0x00800000) /*!<Ethernet PHY interface selection */
+/* Old MII_RMII_SEL bit definition, maintained for legacy purpose */
+#define SYSCFG_PMC_MII_RMII             SYSCFG_PMC_MII_RMII_SEL
+
+/*****************  Bit definition for SYSCFG_EXTICR1 register  ***************/
+#define SYSCFG_EXTICR1_EXTI0            ((uint32_t)0x000F) /*!<EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1            ((uint32_t)0x00F0) /*!<EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2            ((uint32_t)0x0F00) /*!<EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3            ((uint32_t)0xF000) /*!<EXTI 3 configuration */
+/**
+  * @brief   EXTI0 configuration
+  */
+#define SYSCFG_EXTICR1_EXTI0_PA         ((uint32_t)0x0000) /*!<PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB         ((uint32_t)0x0001) /*!<PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC         ((uint32_t)0x0002) /*!<PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD         ((uint32_t)0x0003) /*!<PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE         ((uint32_t)0x0004) /*!<PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF         ((uint32_t)0x0005) /*!<PF[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PG         ((uint32_t)0x0006) /*!<PG[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH         ((uint32_t)0x0007) /*!<PH[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PI         ((uint32_t)0x0008) /*!<PI[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PJ         ((uint32_t)0x0009) /*!<PJ[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PK         ((uint32_t)0x000A) /*!<PK[0] pin */
+
+/**
+  * @brief   EXTI1 configuration
+  */
+#define SYSCFG_EXTICR1_EXTI1_PA         ((uint32_t)0x0000) /*!<PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB         ((uint32_t)0x0010) /*!<PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC         ((uint32_t)0x0020) /*!<PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD         ((uint32_t)0x0030) /*!<PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE         ((uint32_t)0x0040) /*!<PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF         ((uint32_t)0x0050) /*!<PF[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PG         ((uint32_t)0x0060) /*!<PG[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH         ((uint32_t)0x0070) /*!<PH[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PI         ((uint32_t)0x0080) /*!<PI[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PJ         ((uint32_t)0x0090) /*!<PJ[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PK         ((uint32_t)0x00A0) /*!<PK[1] pin */
+
+
+/**
+  * @brief   EXTI2 configuration
+  */
+#define SYSCFG_EXTICR1_EXTI2_PA         ((uint32_t)0x0000) /*!<PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB         ((uint32_t)0x0100) /*!<PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC         ((uint32_t)0x0200) /*!<PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD         ((uint32_t)0x0300) /*!<PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE         ((uint32_t)0x0400) /*!<PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF         ((uint32_t)0x0500) /*!<PF[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PG         ((uint32_t)0x0600) /*!<PG[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH         ((uint32_t)0x0700) /*!<PH[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PI         ((uint32_t)0x0800) /*!<PI[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PJ         ((uint32_t)0x0900) /*!<PJ[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PK         ((uint32_t)0x0A00) /*!<PK[2] pin */
+
+
+/**
+  * @brief   EXTI3 configuration
+  */
+#define SYSCFG_EXTICR1_EXTI3_PA         ((uint32_t)0x0000) /*!<PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB         ((uint32_t)0x1000) /*!<PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC         ((uint32_t)0x2000) /*!<PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD         ((uint32_t)0x3000) /*!<PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE         ((uint32_t)0x4000) /*!<PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF         ((uint32_t)0x5000) /*!<PF[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PG         ((uint32_t)0x6000) /*!<PG[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PH         ((uint32_t)0x7000) /*!<PH[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PI         ((uint32_t)0x8000) /*!<PI[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PJ         ((uint32_t)0x9000) /*!<PJ[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PK         ((uint32_t)0xA000) /*!<PK[3] pin */
+
+
+/*****************  Bit definition for SYSCFG_EXTICR2 register  ***************/
+#define SYSCFG_EXTICR2_EXTI4            ((uint32_t)0x000F) /*!<EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5            ((uint32_t)0x00F0) /*!<EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6            ((uint32_t)0x0F00) /*!<EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7            ((uint32_t)0xF000) /*!<EXTI 7 configuration */
+/**
+  * @brief   EXTI4 configuration
+  */
+#define SYSCFG_EXTICR2_EXTI4_PA         ((uint32_t)0x0000) /*!<PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB         ((uint32_t)0x0001) /*!<PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC         ((uint32_t)0x0002) /*!<PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD         ((uint32_t)0x0003) /*!<PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE         ((uint32_t)0x0004) /*!<PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF         ((uint32_t)0x0005) /*!<PF[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PG         ((uint32_t)0x0006) /*!<PG[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH         ((uint32_t)0x0007) /*!<PH[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PI         ((uint32_t)0x0008) /*!<PI[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PJ         ((uint32_t)0x0009) /*!<PJ[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PK         ((uint32_t)0x000A) /*!<PK[4] pin */
+
+/**
+  * @brief   EXTI5 configuration
+  */
+#define SYSCFG_EXTICR2_EXTI5_PA         ((uint32_t)0x0000) /*!<PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB         ((uint32_t)0x0010) /*!<PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC         ((uint32_t)0x0020) /*!<PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD         ((uint32_t)0x0030) /*!<PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE         ((uint32_t)0x0040) /*!<PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF         ((uint32_t)0x0050) /*!<PF[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PG         ((uint32_t)0x0060) /*!<PG[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PH         ((uint32_t)0x0070) /*!<PH[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PI         ((uint32_t)0x0080) /*!<PI[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PJ         ((uint32_t)0x0090) /*!<PJ[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PK         ((uint32_t)0x00A0) /*!<PK[5] pin */
+
+/**
+  * @brief   EXTI6 configuration
+  */
+#define SYSCFG_EXTICR2_EXTI6_PA         ((uint32_t)0x0000) /*!<PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB         ((uint32_t)0x0100) /*!<PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC         ((uint32_t)0x0200) /*!<PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD         ((uint32_t)0x0300) /*!<PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE         ((uint32_t)0x0400) /*!<PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF         ((uint32_t)0x0500) /*!<PF[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PG         ((uint32_t)0x0600) /*!<PG[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PH         ((uint32_t)0x0700) /*!<PH[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PI         ((uint32_t)0x0800) /*!<PI[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PJ         ((uint32_t)0x0900) /*!<PJ[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PK         ((uint32_t)0x0A00) /*!<PK[6] pin */
+
+
+/**
+  * @brief   EXTI7 configuration
+  */
+#define SYSCFG_EXTICR2_EXTI7_PA         ((uint32_t)0x0000) /*!<PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB         ((uint32_t)0x1000) /*!<PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC         ((uint32_t)0x2000) /*!<PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD         ((uint32_t)0x3000) /*!<PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE         ((uint32_t)0x4000) /*!<PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF         ((uint32_t)0x5000) /*!<PF[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PG         ((uint32_t)0x6000) /*!<PG[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PH         ((uint32_t)0x7000) /*!<PH[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PI         ((uint32_t)0x8000) /*!<PI[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PJ         ((uint32_t)0x9000) /*!<PJ[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PK         ((uint32_t)0xA000) /*!<PK[7] pin */
+
+/*****************  Bit definition for SYSCFG_EXTICR3 register  ***************/
+#define SYSCFG_EXTICR3_EXTI8            ((uint32_t)0x000F) /*!<EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9            ((uint32_t)0x00F0) /*!<EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10           ((uint32_t)0x0F00) /*!<EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11           ((uint32_t)0xF000) /*!<EXTI 11 configuration */
+
+/**
+  * @brief   EXTI8 configuration
+  */
+#define SYSCFG_EXTICR3_EXTI8_PA         ((uint32_t)0x0000) /*!<PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB         ((uint32_t)0x0001) /*!<PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC         ((uint32_t)0x0002) /*!<PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD         ((uint32_t)0x0003) /*!<PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE         ((uint32_t)0x0004) /*!<PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF         ((uint32_t)0x0005) /*!<PF[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PG         ((uint32_t)0x0006) /*!<PG[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PH         ((uint32_t)0x0007) /*!<PH[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PI         ((uint32_t)0x0008) /*!<PI[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PJ         ((uint32_t)0x0009) /*!<PJ[8] pin */
+
+/**
+  * @brief   EXTI9 configuration
+  */
+#define SYSCFG_EXTICR3_EXTI9_PA         ((uint32_t)0x0000) /*!<PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB         ((uint32_t)0x0010) /*!<PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC         ((uint32_t)0x0020) /*!<PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD         ((uint32_t)0x0030) /*!<PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE         ((uint32_t)0x0040) /*!<PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF         ((uint32_t)0x0050) /*!<PF[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PG         ((uint32_t)0x0060) /*!<PG[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PH         ((uint32_t)0x0070) /*!<PH[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PI         ((uint32_t)0x0080) /*!<PI[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PJ         ((uint32_t)0x0090) /*!<PJ[9] pin */
+
+
+/**
+  * @brief   EXTI10 configuration
+  */
+#define SYSCFG_EXTICR3_EXTI10_PA        ((uint32_t)0x0000) /*!<PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB        ((uint32_t)0x0100) /*!<PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC        ((uint32_t)0x0200) /*!<PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD        ((uint32_t)0x0300) /*!<PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE        ((uint32_t)0x0400) /*!<PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF        ((uint32_t)0x0500) /*!<PF[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PG        ((uint32_t)0x0600) /*!<PG[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PH        ((uint32_t)0x0700) /*!<PH[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PI        ((uint32_t)0x0800) /*!<PI[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PJ        ((uint32_t)0x0900) /*!<PJ[10] pin */
+
+
+/**
+  * @brief   EXTI11 configuration
+  */
+#define SYSCFG_EXTICR3_EXTI11_PA        ((uint32_t)0x0000) /*!<PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB        ((uint32_t)0x1000) /*!<PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC        ((uint32_t)0x2000) /*!<PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD        ((uint32_t)0x3000) /*!<PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE        ((uint32_t)0x4000) /*!<PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF        ((uint32_t)0x5000) /*!<PF[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PG        ((uint32_t)0x6000) /*!<PG[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PH        ((uint32_t)0x7000) /*!<PH[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PI        ((uint32_t)0x8000) /*!<PI[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PJ        ((uint32_t)0x9000) /*!<PJ[11] pin */
+
+
+/*****************  Bit definition for SYSCFG_EXTICR4 register  ***************/
+#define SYSCFG_EXTICR4_EXTI12           ((uint32_t)0x000F) /*!<EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13           ((uint32_t)0x00F0) /*!<EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14           ((uint32_t)0x0F00) /*!<EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15           ((uint32_t)0xF000) /*!<EXTI 15 configuration */
+/**
+  * @brief   EXTI12 configuration
+  */
+#define SYSCFG_EXTICR4_EXTI12_PA        ((uint32_t)0x0000) /*!<PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB        ((uint32_t)0x0001) /*!<PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC        ((uint32_t)0x0002) /*!<PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD        ((uint32_t)0x0003) /*!<PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE        ((uint32_t)0x0004) /*!<PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF        ((uint32_t)0x0005) /*!<PF[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PG        ((uint32_t)0x0006) /*!<PG[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PH        ((uint32_t)0x0007) /*!<PH[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PI        ((uint32_t)0x0008) /*!<PI[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PJ        ((uint32_t)0x0009) /*!<PJ[12] pin */
+
+
+/**
+  * @brief   EXTI13 configuration
+  */
+#define SYSCFG_EXTICR4_EXTI13_PA        ((uint32_t)0x0000) /*!<PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB        ((uint32_t)0x0010) /*!<PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC        ((uint32_t)0x0020) /*!<PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD        ((uint32_t)0x0030) /*!<PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE        ((uint32_t)0x0040) /*!<PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF        ((uint32_t)0x0050) /*!<PF[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PG        ((uint32_t)0x0060) /*!<PG[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PH        ((uint32_t)0x0070) /*!<PH[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PI        ((uint32_t)0x0008) /*!<PI[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PJ        ((uint32_t)0x0009) /*!<PJ[13] pin */
+
+
+/**
+  * @brief   EXTI14 configuration
+  */
+#define SYSCFG_EXTICR4_EXTI14_PA        ((uint32_t)0x0000) /*!<PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB        ((uint32_t)0x0100) /*!<PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC        ((uint32_t)0x0200) /*!<PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD        ((uint32_t)0x0300) /*!<PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE        ((uint32_t)0x0400) /*!<PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF        ((uint32_t)0x0500) /*!<PF[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PG        ((uint32_t)0x0600) /*!<PG[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PH        ((uint32_t)0x0700) /*!<PH[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PI        ((uint32_t)0x0800) /*!<PI[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PJ        ((uint32_t)0x0900) /*!<PJ[14] pin */
+
+
+/**
+  * @brief   EXTI15 configuration
+  */
+#define SYSCFG_EXTICR4_EXTI15_PA        ((uint32_t)0x0000) /*!<PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB        ((uint32_t)0x1000) /*!<PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC        ((uint32_t)0x2000) /*!<PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD        ((uint32_t)0x3000) /*!<PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE        ((uint32_t)0x4000) /*!<PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF        ((uint32_t)0x5000) /*!<PF[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PG        ((uint32_t)0x6000) /*!<PG[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PH        ((uint32_t)0x7000) /*!<PH[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PI        ((uint32_t)0x8000) /*!<PI[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PJ        ((uint32_t)0x9000) /*!<PJ[15] pin */
+
+/******************  Bit definition for SYSCFG_CMPCR register  ****************/
+#define SYSCFG_CMPCR_CMP_PD             ((uint32_t)0x00000001) /*!<Compensation cell ready flag */
+#define SYSCFG_CMPCR_READY              ((uint32_t)0x00000100) /*!<Compensation cell power-down */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    TIM                                     */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for TIM_CR1 register  ********************/
+#define  TIM_CR1_CEN                         ((uint32_t)0x0001)            /*!<Counter enable        */
+#define  TIM_CR1_UDIS                        ((uint32_t)0x0002)            /*!<Update disable        */
+#define  TIM_CR1_URS                         ((uint32_t)0x0004)            /*!<Update request source */
+#define  TIM_CR1_OPM                         ((uint32_t)0x0008)            /*!<One pulse mode        */
+#define  TIM_CR1_DIR                         ((uint32_t)0x0010)            /*!<Direction             */
+
+#define  TIM_CR1_CMS                         ((uint32_t)0x0060)            /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define  TIM_CR1_CMS_0                       ((uint32_t)0x0020)            /*!<Bit 0 */
+#define  TIM_CR1_CMS_1                       ((uint32_t)0x0040)            /*!<Bit 1 */
+
+#define  TIM_CR1_ARPE                        ((uint32_t)0x0080)            /*!<Auto-reload preload enable     */
+
+#define  TIM_CR1_CKD                         ((uint32_t)0x0300)            /*!<CKD[1:0] bits (clock division) */
+#define  TIM_CR1_CKD_0                       ((uint32_t)0x0100)            /*!<Bit 0 */
+#define  TIM_CR1_CKD_1                       ((uint32_t)0x0200)            /*!<Bit 1 */
+
+/*******************  Bit definition for TIM_CR2 register  ********************/
+#define  TIM_CR2_CCPC                        ((uint32_t)0x0001)            /*!<Capture/Compare Preloaded Control        */
+#define  TIM_CR2_CCUS                        ((uint32_t)0x0004)            /*!<Capture/Compare Control Update Selection */
+#define  TIM_CR2_CCDS                        ((uint32_t)0x0008)            /*!<Capture/Compare DMA Selection            */
+
+#define  TIM_CR2_MMS                         ((uint32_t)0x0070)            /*!<MMS[2:0] bits (Master Mode Selection) */
+#define  TIM_CR2_MMS_0                       ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_CR2_MMS_1                       ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_CR2_MMS_2                       ((uint32_t)0x0040)            /*!<Bit 2 */
+
+#define  TIM_CR2_TI1S                        ((uint32_t)0x0080)            /*!<TI1 Selection */
+#define  TIM_CR2_OIS1                        ((uint32_t)0x0100)            /*!<Output Idle state 1 (OC1 output)  */
+#define  TIM_CR2_OIS1N                       ((uint32_t)0x0200)            /*!<Output Idle state 1 (OC1N output) */
+#define  TIM_CR2_OIS2                        ((uint32_t)0x0400)            /*!<Output Idle state 2 (OC2 output)  */
+#define  TIM_CR2_OIS2N                       ((uint32_t)0x0800)            /*!<Output Idle state 2 (OC2N output) */
+#define  TIM_CR2_OIS3                        ((uint32_t)0x1000)            /*!<Output Idle state 3 (OC3 output)  */
+#define  TIM_CR2_OIS3N                       ((uint32_t)0x2000)            /*!<Output Idle state 3 (OC3N output) */
+#define  TIM_CR2_OIS4                        ((uint32_t)0x4000)            /*!<Output Idle state 4 (OC4 output)  */
+
+/*******************  Bit definition for TIM_SMCR register  *******************/
+#define  TIM_SMCR_SMS                        ((uint32_t)0x0007)            /*!<SMS[2:0] bits (Slave mode selection)    */
+#define  TIM_SMCR_SMS_0                      ((uint32_t)0x0001)            /*!<Bit 0 */
+#define  TIM_SMCR_SMS_1                      ((uint32_t)0x0002)            /*!<Bit 1 */
+#define  TIM_SMCR_SMS_2                      ((uint32_t)0x0004)            /*!<Bit 2 */
+
+#define  TIM_SMCR_TS                         ((uint32_t)0x0070)            /*!<TS[2:0] bits (Trigger selection)        */
+#define  TIM_SMCR_TS_0                       ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_SMCR_TS_1                       ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_SMCR_TS_2                       ((uint32_t)0x0040)            /*!<Bit 2 */
+
+#define  TIM_SMCR_MSM                        ((uint32_t)0x0080)            /*!<Master/slave mode                       */
+
+#define  TIM_SMCR_ETF                        ((uint32_t)0x0F00)            /*!<ETF[3:0] bits (External trigger filter) */
+#define  TIM_SMCR_ETF_0                      ((uint32_t)0x0100)            /*!<Bit 0 */
+#define  TIM_SMCR_ETF_1                      ((uint32_t)0x0200)            /*!<Bit 1 */
+#define  TIM_SMCR_ETF_2                      ((uint32_t)0x0400)            /*!<Bit 2 */
+#define  TIM_SMCR_ETF_3                      ((uint32_t)0x0800)            /*!<Bit 3 */
+
+#define  TIM_SMCR_ETPS                       ((uint32_t)0x3000)            /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define  TIM_SMCR_ETPS_0                     ((uint32_t)0x1000)            /*!<Bit 0 */
+#define  TIM_SMCR_ETPS_1                     ((uint32_t)0x2000)            /*!<Bit 1 */
+
+#define  TIM_SMCR_ECE                        ((uint32_t)0x4000)            /*!<External clock enable     */
+#define  TIM_SMCR_ETP                        ((uint32_t)0x8000)            /*!<External trigger polarity */
+
+/*******************  Bit definition for TIM_DIER register  *******************/
+#define  TIM_DIER_UIE                        ((uint32_t)0x0001)            /*!<Update interrupt enable */
+#define  TIM_DIER_CC1IE                      ((uint32_t)0x0002)            /*!<Capture/Compare 1 interrupt enable   */
+#define  TIM_DIER_CC2IE                      ((uint32_t)0x0004)            /*!<Capture/Compare 2 interrupt enable   */
+#define  TIM_DIER_CC3IE                      ((uint32_t)0x0008)            /*!<Capture/Compare 3 interrupt enable   */
+#define  TIM_DIER_CC4IE                      ((uint32_t)0x0010)            /*!<Capture/Compare 4 interrupt enable   */
+#define  TIM_DIER_COMIE                      ((uint32_t)0x0020)            /*!<COM interrupt enable                 */
+#define  TIM_DIER_TIE                        ((uint32_t)0x0040)            /*!<Trigger interrupt enable             */
+#define  TIM_DIER_BIE                        ((uint32_t)0x0080)            /*!<Break interrupt enable               */
+#define  TIM_DIER_UDE                        ((uint32_t)0x0100)            /*!<Update DMA request enable            */
+#define  TIM_DIER_CC1DE                      ((uint32_t)0x0200)            /*!<Capture/Compare 1 DMA request enable */
+#define  TIM_DIER_CC2DE                      ((uint32_t)0x0400)            /*!<Capture/Compare 2 DMA request enable */
+#define  TIM_DIER_CC3DE                      ((uint32_t)0x0800)            /*!<Capture/Compare 3 DMA request enable */
+#define  TIM_DIER_CC4DE                      ((uint32_t)0x1000)            /*!<Capture/Compare 4 DMA request enable */
+#define  TIM_DIER_COMDE                      ((uint32_t)0x2000)            /*!<COM DMA request enable               */
+#define  TIM_DIER_TDE                        ((uint32_t)0x4000)            /*!<Trigger DMA request enable           */
+
+/********************  Bit definition for TIM_SR register  ********************/
+#define  TIM_SR_UIF                          ((uint32_t)0x0001)            /*!<Update interrupt Flag              */
+#define  TIM_SR_CC1IF                        ((uint32_t)0x0002)            /*!<Capture/Compare 1 interrupt Flag   */
+#define  TIM_SR_CC2IF                        ((uint32_t)0x0004)            /*!<Capture/Compare 2 interrupt Flag   */
+#define  TIM_SR_CC3IF                        ((uint32_t)0x0008)            /*!<Capture/Compare 3 interrupt Flag   */
+#define  TIM_SR_CC4IF                        ((uint32_t)0x0010)            /*!<Capture/Compare 4 interrupt Flag   */
+#define  TIM_SR_COMIF                        ((uint32_t)0x0020)            /*!<COM interrupt Flag                 */
+#define  TIM_SR_TIF                          ((uint32_t)0x0040)            /*!<Trigger interrupt Flag             */
+#define  TIM_SR_BIF                          ((uint32_t)0x0080)            /*!<Break interrupt Flag               */
+#define  TIM_SR_CC1OF                        ((uint32_t)0x0200)            /*!<Capture/Compare 1 Overcapture Flag */
+#define  TIM_SR_CC2OF                        ((uint32_t)0x0400)            /*!<Capture/Compare 2 Overcapture Flag */
+#define  TIM_SR_CC3OF                        ((uint32_t)0x0800)            /*!<Capture/Compare 3 Overcapture Flag */
+#define  TIM_SR_CC4OF                        ((uint32_t)0x1000)            /*!<Capture/Compare 4 Overcapture Flag */
+
+/*******************  Bit definition for TIM_EGR register  ********************/
+#define  TIM_EGR_UG                          ((uint32_t)0x01)               /*!<Update Generation                         */
+#define  TIM_EGR_CC1G                        ((uint32_t)0x02)               /*!<Capture/Compare 1 Generation              */
+#define  TIM_EGR_CC2G                        ((uint32_t)0x04)               /*!<Capture/Compare 2 Generation              */
+#define  TIM_EGR_CC3G                        ((uint32_t)0x08)               /*!<Capture/Compare 3 Generation              */
+#define  TIM_EGR_CC4G                        ((uint32_t)0x10)               /*!<Capture/Compare 4 Generation              */
+#define  TIM_EGR_COMG                        ((uint32_t)0x20)               /*!<Capture/Compare Control Update Generation */
+#define  TIM_EGR_TG                          ((uint32_t)0x40)               /*!<Trigger Generation                        */
+#define  TIM_EGR_BG                          ((uint32_t)0x80)               /*!<Break Generation                          */
+
+/******************  Bit definition for TIM_CCMR1 register  *******************/
+#define  TIM_CCMR1_CC1S                      ((uint32_t)0x0003)            /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define  TIM_CCMR1_CC1S_0                    ((uint32_t)0x0001)            /*!<Bit 0 */
+#define  TIM_CCMR1_CC1S_1                    ((uint32_t)0x0002)            /*!<Bit 1 */
+
+#define  TIM_CCMR1_OC1FE                     ((uint32_t)0x0004)            /*!<Output Compare 1 Fast enable                 */
+#define  TIM_CCMR1_OC1PE                     ((uint32_t)0x0008)            /*!<Output Compare 1 Preload enable              */
+
+#define  TIM_CCMR1_OC1M                      ((uint32_t)0x0070)            /*!<OC1M[2:0] bits (Output Compare 1 Mode)       */
+#define  TIM_CCMR1_OC1M_0                    ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_CCMR1_OC1M_1                    ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_CCMR1_OC1M_2                    ((uint32_t)0x0040)            /*!<Bit 2 */
+
+#define  TIM_CCMR1_OC1CE                     ((uint32_t)0x0080)            /*!<Output Compare 1Clear Enable                 */
+
+#define  TIM_CCMR1_CC2S                      ((uint32_t)0x0300)            /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define  TIM_CCMR1_CC2S_0                    ((uint32_t)0x0100)            /*!<Bit 0 */
+#define  TIM_CCMR1_CC2S_1                    ((uint32_t)0x0200)            /*!<Bit 1 */
+
+#define  TIM_CCMR1_OC2FE                     ((uint32_t)0x0400)            /*!<Output Compare 2 Fast enable                 */
+#define  TIM_CCMR1_OC2PE                     ((uint32_t)0x0800)            /*!<Output Compare 2 Preload enable              */
+
+#define  TIM_CCMR1_OC2M                      ((uint32_t)0x7000)            /*!<OC2M[2:0] bits (Output Compare 2 Mode)       */
+#define  TIM_CCMR1_OC2M_0                    ((uint32_t)0x1000)            /*!<Bit 0 */
+#define  TIM_CCMR1_OC2M_1                    ((uint32_t)0x2000)            /*!<Bit 1 */
+#define  TIM_CCMR1_OC2M_2                    ((uint32_t)0x4000)            /*!<Bit 2 */
+
+#define  TIM_CCMR1_OC2CE                     ((uint32_t)0x8000)            /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define  TIM_CCMR1_IC1PSC                    ((uint32_t)0x000C)            /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define  TIM_CCMR1_IC1PSC_0                  ((uint32_t)0x0004)            /*!<Bit 0 */
+#define  TIM_CCMR1_IC1PSC_1                  ((uint32_t)0x0008)            /*!<Bit 1 */
+
+#define  TIM_CCMR1_IC1F                      ((uint32_t)0x00F0)            /*!<IC1F[3:0] bits (Input Capture 1 Filter)      */
+#define  TIM_CCMR1_IC1F_0                    ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_CCMR1_IC1F_1                    ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_CCMR1_IC1F_2                    ((uint32_t)0x0040)            /*!<Bit 2 */
+#define  TIM_CCMR1_IC1F_3                    ((uint32_t)0x0080)            /*!<Bit 3 */
+
+#define  TIM_CCMR1_IC2PSC                    ((uint32_t)0x0C00)            /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler)  */
+#define  TIM_CCMR1_IC2PSC_0                  ((uint32_t)0x0400)            /*!<Bit 0 */
+#define  TIM_CCMR1_IC2PSC_1                  ((uint32_t)0x0800)            /*!<Bit 1 */
+
+#define  TIM_CCMR1_IC2F                      ((uint32_t)0xF000)            /*!<IC2F[3:0] bits (Input Capture 2 Filter)       */
+#define  TIM_CCMR1_IC2F_0                    ((uint32_t)0x1000)            /*!<Bit 0 */
+#define  TIM_CCMR1_IC2F_1                    ((uint32_t)0x2000)            /*!<Bit 1 */
+#define  TIM_CCMR1_IC2F_2                    ((uint32_t)0x4000)            /*!<Bit 2 */
+#define  TIM_CCMR1_IC2F_3                    ((uint32_t)0x8000)            /*!<Bit 3 */
+
+/******************  Bit definition for TIM_CCMR2 register  *******************/
+#define  TIM_CCMR2_CC3S                      ((uint32_t)0x0003)            /*!<CC3S[1:0] bits (Capture/Compare 3 Selection)  */
+#define  TIM_CCMR2_CC3S_0                    ((uint32_t)0x0001)            /*!<Bit 0 */
+#define  TIM_CCMR2_CC3S_1                    ((uint32_t)0x0002)            /*!<Bit 1 */
+
+#define  TIM_CCMR2_OC3FE                     ((uint32_t)0x0004)            /*!<Output Compare 3 Fast enable           */
+#define  TIM_CCMR2_OC3PE                     ((uint32_t)0x0008)            /*!<Output Compare 3 Preload enable        */
+
+#define  TIM_CCMR2_OC3M                      ((uint32_t)0x0070)            /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define  TIM_CCMR2_OC3M_0                    ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_CCMR2_OC3M_1                    ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_CCMR2_OC3M_2                    ((uint32_t)0x0040)            /*!<Bit 2 */
+
+#define  TIM_CCMR2_OC3CE                     ((uint32_t)0x0080)            /*!<Output Compare 3 Clear Enable */
+
+#define  TIM_CCMR2_CC4S                      ((uint32_t)0x0300)            /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define  TIM_CCMR2_CC4S_0                    ((uint32_t)0x0100)            /*!<Bit 0 */
+#define  TIM_CCMR2_CC4S_1                    ((uint32_t)0x0200)            /*!<Bit 1 */
+
+#define  TIM_CCMR2_OC4FE                     ((uint32_t)0x0400)            /*!<Output Compare 4 Fast enable    */
+#define  TIM_CCMR2_OC4PE                     ((uint32_t)0x0800)            /*!<Output Compare 4 Preload enable */
+
+#define  TIM_CCMR2_OC4M                      ((uint32_t)0x7000)            /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define  TIM_CCMR2_OC4M_0                    ((uint32_t)0x1000)            /*!<Bit 0 */
+#define  TIM_CCMR2_OC4M_1                    ((uint32_t)0x2000)            /*!<Bit 1 */
+#define  TIM_CCMR2_OC4M_2                    ((uint32_t)0x4000)            /*!<Bit 2 */
+
+#define  TIM_CCMR2_OC4CE                     ((uint32_t)0x8000)            /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define  TIM_CCMR2_IC3PSC                    ((uint32_t)0x000C)            /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define  TIM_CCMR2_IC3PSC_0                  ((uint32_t)0x0004)            /*!<Bit 0 */
+#define  TIM_CCMR2_IC3PSC_1                  ((uint32_t)0x0008)            /*!<Bit 1 */
+
+#define  TIM_CCMR2_IC3F                      ((uint32_t)0x00F0)            /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define  TIM_CCMR2_IC3F_0                    ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_CCMR2_IC3F_1                    ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_CCMR2_IC3F_2                    ((uint32_t)0x0040)            /*!<Bit 2 */
+#define  TIM_CCMR2_IC3F_3                    ((uint32_t)0x0080)            /*!<Bit 3 */
+
+#define  TIM_CCMR2_IC4PSC                    ((uint32_t)0x0C00)            /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define  TIM_CCMR2_IC4PSC_0                  ((uint32_t)0x0400)            /*!<Bit 0 */
+#define  TIM_CCMR2_IC4PSC_1                  ((uint32_t)0x0800)            /*!<Bit 1 */
+
+#define  TIM_CCMR2_IC4F                      ((uint32_t)0xF000)            /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define  TIM_CCMR2_IC4F_0                    ((uint32_t)0x1000)            /*!<Bit 0 */
+#define  TIM_CCMR2_IC4F_1                    ((uint32_t)0x2000)            /*!<Bit 1 */
+#define  TIM_CCMR2_IC4F_2                    ((uint32_t)0x4000)            /*!<Bit 2 */
+#define  TIM_CCMR2_IC4F_3                    ((uint32_t)0x8000)            /*!<Bit 3 */
+
+/*******************  Bit definition for TIM_CCER register  *******************/
+#define  TIM_CCER_CC1E                       ((uint32_t)0x0001)            /*!<Capture/Compare 1 output enable                 */
+#define  TIM_CCER_CC1P                       ((uint32_t)0x0002)            /*!<Capture/Compare 1 output Polarity               */
+#define  TIM_CCER_CC1NE                      ((uint32_t)0x0004)            /*!<Capture/Compare 1 Complementary output enable   */
+#define  TIM_CCER_CC1NP                      ((uint32_t)0x0008)            /*!<Capture/Compare 1 Complementary output Polarity */
+#define  TIM_CCER_CC2E                       ((uint32_t)0x0010)            /*!<Capture/Compare 2 output enable                 */
+#define  TIM_CCER_CC2P                       ((uint32_t)0x0020)            /*!<Capture/Compare 2 output Polarity               */
+#define  TIM_CCER_CC2NE                      ((uint32_t)0x0040)            /*!<Capture/Compare 2 Complementary output enable   */
+#define  TIM_CCER_CC2NP                      ((uint32_t)0x0080)            /*!<Capture/Compare 2 Complementary output Polarity */
+#define  TIM_CCER_CC3E                       ((uint32_t)0x0100)            /*!<Capture/Compare 3 output enable                 */
+#define  TIM_CCER_CC3P                       ((uint32_t)0x0200)            /*!<Capture/Compare 3 output Polarity               */
+#define  TIM_CCER_CC3NE                      ((uint32_t)0x0400)            /*!<Capture/Compare 3 Complementary output enable   */
+#define  TIM_CCER_CC3NP                      ((uint32_t)0x0800)            /*!<Capture/Compare 3 Complementary output Polarity */
+#define  TIM_CCER_CC4E                       ((uint32_t)0x1000)            /*!<Capture/Compare 4 output enable                 */
+#define  TIM_CCER_CC4P                       ((uint32_t)0x2000)            /*!<Capture/Compare 4 output Polarity               */
+#define  TIM_CCER_CC4NP                      ((uint32_t)0x8000)            /*!<Capture/Compare 4 Complementary output Polarity */
+
+/*******************  Bit definition for TIM_CNT register  ********************/
+#define  TIM_CNT_CNT                         ((uint32_t)0xFFFF)            /*!<Counter Value            */
+
+/*******************  Bit definition for TIM_PSC register  ********************/
+#define  TIM_PSC_PSC                         ((uint32_t)0xFFFF)            /*!<Prescaler Value          */
+
+/*******************  Bit definition for TIM_ARR register  ********************/
+#define  TIM_ARR_ARR                         ((uint32_t)0xFFFF)            /*!<actual auto-reload Value */
+
+/*******************  Bit definition for TIM_RCR register  ********************/
+#define  TIM_RCR_REP                         ((uint32_t)0xFF)               /*!<Repetition Counter Value */
+
+/*******************  Bit definition for TIM_CCR1 register  *******************/
+#define  TIM_CCR1_CCR1                       ((uint32_t)0xFFFF)            /*!<Capture/Compare 1 Value  */
+
+/*******************  Bit definition for TIM_CCR2 register  *******************/
+#define  TIM_CCR2_CCR2                       ((uint32_t)0xFFFF)            /*!<Capture/Compare 2 Value  */
+
+/*******************  Bit definition for TIM_CCR3 register  *******************/
+#define  TIM_CCR3_CCR3                       ((uint32_t)0xFFFF)            /*!<Capture/Compare 3 Value  */
+
+/*******************  Bit definition for TIM_CCR4 register  *******************/
+#define  TIM_CCR4_CCR4                       ((uint32_t)0xFFFF)            /*!<Capture/Compare 4 Value  */
+
+/*******************  Bit definition for TIM_BDTR register  *******************/
+#define  TIM_BDTR_DTG                        ((uint32_t)0x00FF)            /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define  TIM_BDTR_DTG_0                      ((uint32_t)0x0001)            /*!<Bit 0 */
+#define  TIM_BDTR_DTG_1                      ((uint32_t)0x0002)            /*!<Bit 1 */
+#define  TIM_BDTR_DTG_2                      ((uint32_t)0x0004)            /*!<Bit 2 */
+#define  TIM_BDTR_DTG_3                      ((uint32_t)0x0008)            /*!<Bit 3 */
+#define  TIM_BDTR_DTG_4                      ((uint32_t)0x0010)            /*!<Bit 4 */
+#define  TIM_BDTR_DTG_5                      ((uint32_t)0x0020)            /*!<Bit 5 */
+#define  TIM_BDTR_DTG_6                      ((uint32_t)0x0040)            /*!<Bit 6 */
+#define  TIM_BDTR_DTG_7                      ((uint32_t)0x0080)            /*!<Bit 7 */
+
+#define  TIM_BDTR_LOCK                       ((uint32_t)0x0300)            /*!<LOCK[1:0] bits (Lock Configuration) */
+#define  TIM_BDTR_LOCK_0                     ((uint32_t)0x0100)            /*!<Bit 0 */
+#define  TIM_BDTR_LOCK_1                     ((uint32_t)0x0200)            /*!<Bit 1 */
+
+#define  TIM_BDTR_OSSI                       ((uint32_t)0x0400)            /*!<Off-State Selection for Idle mode */
+#define  TIM_BDTR_OSSR                       ((uint32_t)0x0800)            /*!<Off-State Selection for Run mode  */
+#define  TIM_BDTR_BKE                        ((uint32_t)0x1000)            /*!<Break enable                      */
+#define  TIM_BDTR_BKP                        ((uint32_t)0x2000)            /*!<Break Polarity                    */
+#define  TIM_BDTR_AOE                        ((uint32_t)0x4000)            /*!<Automatic Output enable           */
+#define  TIM_BDTR_MOE                        ((uint32_t)0x8000)            /*!<Main Output enable                */
+
+/*******************  Bit definition for TIM_DCR register  ********************/
+#define  TIM_DCR_DBA                         ((uint32_t)0x001F)            /*!<DBA[4:0] bits (DMA Base Address) */
+#define  TIM_DCR_DBA_0                       ((uint32_t)0x0001)            /*!<Bit 0 */
+#define  TIM_DCR_DBA_1                       ((uint32_t)0x0002)            /*!<Bit 1 */
+#define  TIM_DCR_DBA_2                       ((uint32_t)0x0004)            /*!<Bit 2 */
+#define  TIM_DCR_DBA_3                       ((uint32_t)0x0008)            /*!<Bit 3 */
+#define  TIM_DCR_DBA_4                       ((uint32_t)0x0010)            /*!<Bit 4 */
+
+#define  TIM_DCR_DBL                         ((uint32_t)0x1F00)            /*!<DBL[4:0] bits (DMA Burst Length) */
+#define  TIM_DCR_DBL_0                       ((uint32_t)0x0100)            /*!<Bit 0 */
+#define  TIM_DCR_DBL_1                       ((uint32_t)0x0200)            /*!<Bit 1 */
+#define  TIM_DCR_DBL_2                       ((uint32_t)0x0400)            /*!<Bit 2 */
+#define  TIM_DCR_DBL_3                       ((uint32_t)0x0800)            /*!<Bit 3 */
+#define  TIM_DCR_DBL_4                       ((uint32_t)0x1000)            /*!<Bit 4 */
+
+/*******************  Bit definition for TIM_DMAR register  *******************/
+#define  TIM_DMAR_DMAB                       ((uint32_t)0xFFFF)            /*!<DMA register for burst accesses                    */
+
+/*******************  Bit definition for TIM_OR register  *********************/
+#define TIM_OR_TI4_RMP                       ((uint32_t)0x00C0)            /*!<TI4_RMP[1:0] bits (TIM5 Input 4 remap)             */
+#define TIM_OR_TI4_RMP_0                     ((uint32_t)0x0040)            /*!<Bit 0 */
+#define TIM_OR_TI4_RMP_1                     ((uint32_t)0x0080)            /*!<Bit 1 */
+#define TIM_OR_ITR1_RMP                      ((uint32_t)0x0C00)            /*!<ITR1_RMP[1:0] bits (TIM2 Internal trigger 1 remap) */
+#define TIM_OR_ITR1_RMP_0                    ((uint32_t)0x0400)            /*!<Bit 0 */
+#define TIM_OR_ITR1_RMP_1                    ((uint32_t)0x0800)            /*!<Bit 1 */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*         Universal Synchronous Asynchronous Receiver Transmitter            */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for USART_SR register  *******************/
+#define  USART_SR_PE                         ((uint32_t)0x0001)            /*!<Parity Error                 */
+#define  USART_SR_FE                         ((uint32_t)0x0002)            /*!<Framing Error                */
+#define  USART_SR_NE                         ((uint32_t)0x0004)            /*!<Noise Error Flag             */
+#define  USART_SR_ORE                        ((uint32_t)0x0008)            /*!<OverRun Error                */
+#define  USART_SR_IDLE                       ((uint32_t)0x0010)            /*!<IDLE line detected           */
+#define  USART_SR_RXNE                       ((uint32_t)0x0020)            /*!<Read Data Register Not Empty */
+#define  USART_SR_TC                         ((uint32_t)0x0040)            /*!<Transmission Complete        */
+#define  USART_SR_TXE                        ((uint32_t)0x0080)            /*!<Transmit Data Register Empty */
+#define  USART_SR_LBD                        ((uint32_t)0x0100)            /*!<LIN Break Detection Flag     */
+#define  USART_SR_CTS                        ((uint32_t)0x0200)            /*!<CTS Flag                     */
+
+/*******************  Bit definition for USART_DR register  *******************/
+#define  USART_DR_DR                         ((uint32_t)0x01FF)            /*!<Data value */
+
+/******************  Bit definition for USART_BRR register  *******************/
+#define  USART_BRR_DIV_Fraction              ((uint32_t)0x000F)            /*!<Fraction of USARTDIV */
+#define  USART_BRR_DIV_Mantissa              ((uint32_t)0xFFF0)            /*!<Mantissa of USARTDIV */
+
+/******************  Bit definition for USART_CR1 register  *******************/
+#define  USART_CR1_SBK                       ((uint32_t)0x0001)            /*!<Send Break                             */
+#define  USART_CR1_RWU                       ((uint32_t)0x0002)            /*!<Receiver wakeup                        */
+#define  USART_CR1_RE                        ((uint32_t)0x0004)            /*!<Receiver Enable                        */
+#define  USART_CR1_TE                        ((uint32_t)0x0008)            /*!<Transmitter Enable                     */
+#define  USART_CR1_IDLEIE                    ((uint32_t)0x0010)            /*!<IDLE Interrupt Enable                  */
+#define  USART_CR1_RXNEIE                    ((uint32_t)0x0020)            /*!<RXNE Interrupt Enable                  */
+#define  USART_CR1_TCIE                      ((uint32_t)0x0040)            /*!<Transmission Complete Interrupt Enable */
+#define  USART_CR1_TXEIE                     ((uint32_t)0x0080)            /*!<PE Interrupt Enable                    */
+#define  USART_CR1_PEIE                      ((uint32_t)0x0100)            /*!<PE Interrupt Enable                    */
+#define  USART_CR1_PS                        ((uint32_t)0x0200)            /*!<Parity Selection                       */
+#define  USART_CR1_PCE                       ((uint32_t)0x0400)            /*!<Parity Control Enable                  */
+#define  USART_CR1_WAKE                      ((uint32_t)0x0800)            /*!<Wakeup method                          */
+#define  USART_CR1_M                         ((uint32_t)0x1000)            /*!<Word length                            */
+#define  USART_CR1_UE                        ((uint32_t)0x2000)            /*!<USART Enable                           */
+#define  USART_CR1_OVER8                     ((uint32_t)0x8000)            /*!<USART Oversampling by 8 enable         */
+
+/******************  Bit definition for USART_CR2 register  *******************/
+#define  USART_CR2_ADD                       ((uint32_t)0x000F)            /*!<Address of the USART node            */
+#define  USART_CR2_LBDL                      ((uint32_t)0x0020)            /*!<LIN Break Detection Length           */
+#define  USART_CR2_LBDIE                     ((uint32_t)0x0040)            /*!<LIN Break Detection Interrupt Enable */
+#define  USART_CR2_LBCL                      ((uint32_t)0x0100)            /*!<Last Bit Clock pulse                 */
+#define  USART_CR2_CPHA                      ((uint32_t)0x0200)            /*!<Clock Phase                          */
+#define  USART_CR2_CPOL                      ((uint32_t)0x0400)            /*!<Clock Polarity                       */
+#define  USART_CR2_CLKEN                     ((uint32_t)0x0800)            /*!<Clock Enable                         */
+
+#define  USART_CR2_STOP                      ((uint32_t)0x3000)            /*!<STOP[1:0] bits (STOP bits) */
+#define  USART_CR2_STOP_0                    ((uint32_t)0x1000)            /*!<Bit 0 */
+#define  USART_CR2_STOP_1                    ((uint32_t)0x2000)            /*!<Bit 1 */
+
+#define  USART_CR2_LINEN                     ((uint32_t)0x4000)            /*!<LIN mode enable */
+
+/******************  Bit definition for USART_CR3 register  *******************/
+#define  USART_CR3_EIE                       ((uint32_t)0x0001)            /*!<Error Interrupt Enable      */
+#define  USART_CR3_IREN                      ((uint32_t)0x0002)            /*!<IrDA mode Enable            */
+#define  USART_CR3_IRLP                      ((uint32_t)0x0004)            /*!<IrDA Low-Power              */
+#define  USART_CR3_HDSEL                     ((uint32_t)0x0008)            /*!<Half-Duplex Selection       */
+#define  USART_CR3_NACK                      ((uint32_t)0x0010)            /*!<Smartcard NACK enable       */
+#define  USART_CR3_SCEN                      ((uint32_t)0x0020)            /*!<Smartcard mode enable       */
+#define  USART_CR3_DMAR                      ((uint32_t)0x0040)            /*!<DMA Enable Receiver         */
+#define  USART_CR3_DMAT                      ((uint32_t)0x0080)            /*!<DMA Enable Transmitter      */
+#define  USART_CR3_RTSE                      ((uint32_t)0x0100)            /*!<RTS Enable                  */
+#define  USART_CR3_CTSE                      ((uint32_t)0x0200)            /*!<CTS Enable                  */
+#define  USART_CR3_CTSIE                     ((uint32_t)0x0400)            /*!<CTS Interrupt Enable        */
+#define  USART_CR3_ONEBIT                    ((uint32_t)0x0800)            /*!<USART One bit method enable */
+
+/******************  Bit definition for USART_GTPR register  ******************/
+#define  USART_GTPR_PSC                      ((uint32_t)0x00FF)            /*!<PSC[7:0] bits (Prescaler value) */
+#define  USART_GTPR_PSC_0                    ((uint32_t)0x0001)            /*!<Bit 0 */
+#define  USART_GTPR_PSC_1                    ((uint32_t)0x0002)            /*!<Bit 1 */
+#define  USART_GTPR_PSC_2                    ((uint32_t)0x0004)            /*!<Bit 2 */
+#define  USART_GTPR_PSC_3                    ((uint32_t)0x0008)            /*!<Bit 3 */
+#define  USART_GTPR_PSC_4                    ((uint32_t)0x0010)            /*!<Bit 4 */
+#define  USART_GTPR_PSC_5                    ((uint32_t)0x0020)            /*!<Bit 5 */
+#define  USART_GTPR_PSC_6                    ((uint32_t)0x0040)            /*!<Bit 6 */
+#define  USART_GTPR_PSC_7                    ((uint32_t)0x0080)            /*!<Bit 7 */
+
+#define  USART_GTPR_GT                       ((uint32_t)0xFF00)            /*!<Guard time value */
+
+/******************************************************************************/
+/*                                                                            */
+/*                            Window WATCHDOG                                 */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for WWDG_CR register  ********************/
+#define  WWDG_CR_T                           ((uint32_t)0x7F)               /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define  WWDG_CR_T0                          ((uint32_t)0x01)               /*!<Bit 0 */
+#define  WWDG_CR_T1                          ((uint32_t)0x02)               /*!<Bit 1 */
+#define  WWDG_CR_T2                          ((uint32_t)0x04)               /*!<Bit 2 */
+#define  WWDG_CR_T3                          ((uint32_t)0x08)               /*!<Bit 3 */
+#define  WWDG_CR_T4                          ((uint32_t)0x10)               /*!<Bit 4 */
+#define  WWDG_CR_T5                          ((uint32_t)0x20)               /*!<Bit 5 */
+#define  WWDG_CR_T6                          ((uint32_t)0x40)               /*!<Bit 6 */
+
+#define  WWDG_CR_WDGA                        ((uint32_t)0x80)               /*!<Activation bit */
+
+/*******************  Bit definition for WWDG_CFR register  *******************/
+#define  WWDG_CFR_W                          ((uint32_t)0x007F)            /*!<W[6:0] bits (7-bit window value) */
+#define  WWDG_CFR_W0                         ((uint32_t)0x0001)            /*!<Bit 0 */
+#define  WWDG_CFR_W1                         ((uint32_t)0x0002)            /*!<Bit 1 */
+#define  WWDG_CFR_W2                         ((uint32_t)0x0004)            /*!<Bit 2 */
+#define  WWDG_CFR_W3                         ((uint32_t)0x0008)            /*!<Bit 3 */
+#define  WWDG_CFR_W4                         ((uint32_t)0x0010)            /*!<Bit 4 */
+#define  WWDG_CFR_W5                         ((uint32_t)0x0020)            /*!<Bit 5 */
+#define  WWDG_CFR_W6                         ((uint32_t)0x0040)            /*!<Bit 6 */
+
+#define  WWDG_CFR_WDGTB                      ((uint32_t)0x0180)            /*!<WDGTB[1:0] bits (Timer Base) */
+#define  WWDG_CFR_WDGTB0                     ((uint32_t)0x0080)            /*!<Bit 0 */
+#define  WWDG_CFR_WDGTB1                     ((uint32_t)0x0100)            /*!<Bit 1 */
+
+#define  WWDG_CFR_EWI                        ((uint32_t)0x0200)            /*!<Early Wakeup Interrupt */
+
+/*******************  Bit definition for WWDG_SR register  ********************/
+#define  WWDG_SR_EWIF                        ((uint32_t)0x01)               /*!<Early Wakeup Interrupt Flag */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                                DBG                                         */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for DBGMCU_IDCODE register  *************/
+#define  DBGMCU_IDCODE_DEV_ID                ((uint32_t)0x00000FFF)
+#define  DBGMCU_IDCODE_REV_ID                ((uint32_t)0xFFFF0000)
+
+/********************  Bit definition for DBGMCU_CR register  *****************/
+#define  DBGMCU_CR_DBG_SLEEP                 ((uint32_t)0x00000001)
+#define  DBGMCU_CR_DBG_STOP                  ((uint32_t)0x00000002)
+#define  DBGMCU_CR_DBG_STANDBY               ((uint32_t)0x00000004)
+#define  DBGMCU_CR_TRACE_IOEN                ((uint32_t)0x00000020)
+
+#define  DBGMCU_CR_TRACE_MODE                ((uint32_t)0x000000C0)
+#define  DBGMCU_CR_TRACE_MODE_0              ((uint32_t)0x00000040)/*!<Bit 0 */
+#define  DBGMCU_CR_TRACE_MODE_1              ((uint32_t)0x00000080)/*!<Bit 1 */
+
+/********************  Bit definition for DBGMCU_APB1_FZ register  ************/
+#define  DBGMCU_APB1_FZ_DBG_TIM2_STOP            ((uint32_t)0x00000001)
+#define  DBGMCU_APB1_FZ_DBG_TIM3_STOP            ((uint32_t)0x00000002)
+#define  DBGMCU_APB1_FZ_DBG_TIM4_STOP            ((uint32_t)0x00000004)
+#define  DBGMCU_APB1_FZ_DBG_TIM5_STOP            ((uint32_t)0x00000008)
+#define  DBGMCU_APB1_FZ_DBG_TIM6_STOP            ((uint32_t)0x00000010)
+#define  DBGMCU_APB1_FZ_DBG_TIM7_STOP            ((uint32_t)0x00000020)
+#define  DBGMCU_APB1_FZ_DBG_TIM12_STOP           ((uint32_t)0x00000040)
+#define  DBGMCU_APB1_FZ_DBG_TIM13_STOP           ((uint32_t)0x00000080)
+#define  DBGMCU_APB1_FZ_DBG_TIM14_STOP           ((uint32_t)0x00000100)
+#define  DBGMCU_APB1_FZ_DBG_RTC_STOP             ((uint32_t)0x00000400)
+#define  DBGMCU_APB1_FZ_DBG_WWDG_STOP            ((uint32_t)0x00000800)
+#define  DBGMCU_APB1_FZ_DBG_IWDG_STOP            ((uint32_t)0x00001000)
+#define  DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT   ((uint32_t)0x00200000)
+#define  DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT   ((uint32_t)0x00400000)
+#define  DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT   ((uint32_t)0x00800000)
+#define  DBGMCU_APB1_FZ_DBG_CAN1_STOP            ((uint32_t)0x02000000)
+#define  DBGMCU_APB1_FZ_DBG_CAN2_STOP            ((uint32_t)0x04000000)
+/* Old IWDGSTOP bit definition, maintained for legacy purpose */
+#define  DBGMCU_APB1_FZ_DBG_IWDEG_STOP           DBGMCU_APB1_FZ_DBG_IWDG_STOP
+
+/********************  Bit definition for DBGMCU_APB2_FZ register  ************/
+#define  DBGMCU_APB2_FZ_DBG_TIM1_STOP        ((uint32_t)0x00000001)
+#define  DBGMCU_APB2_FZ_DBG_TIM8_STOP        ((uint32_t)0x00000002)
+#define  DBGMCU_APB2_FZ_DBG_TIM9_STOP        ((uint32_t)0x00010000)
+#define  DBGMCU_APB2_FZ_DBG_TIM10_STOP       ((uint32_t)0x00020000)
+#define  DBGMCU_APB2_FZ_DBG_TIM11_STOP       ((uint32_t)0x00040000)
+
+/******************************************************************************/
+/*                                                                            */
+/*                Ethernet MAC Registers bits definitions                     */
+/*                                                                            */
+/******************************************************************************/
+/* Bit definition for Ethernet MAC Control Register register */
+#define ETH_MACCR_WD      ((uint32_t)0x00800000)  /* Watchdog disable */
+#define ETH_MACCR_JD      ((uint32_t)0x00400000)  /* Jabber disable */
+#define ETH_MACCR_IFG     ((uint32_t)0x000E0000)  /* Inter-frame gap */
+#define ETH_MACCR_IFG_96Bit     ((uint32_t)0x00000000)  /* Minimum IFG between frames during transmission is 96Bit */
+  #define ETH_MACCR_IFG_88Bit     ((uint32_t)0x00020000)  /* Minimum IFG between frames during transmission is 88Bit */
+  #define ETH_MACCR_IFG_80Bit     ((uint32_t)0x00040000)  /* Minimum IFG between frames during transmission is 80Bit */
+  #define ETH_MACCR_IFG_72Bit     ((uint32_t)0x00060000)  /* Minimum IFG between frames during transmission is 72Bit */
+  #define ETH_MACCR_IFG_64Bit     ((uint32_t)0x00080000)  /* Minimum IFG between frames during transmission is 64Bit */
+  #define ETH_MACCR_IFG_56Bit     ((uint32_t)0x000A0000)  /* Minimum IFG between frames during transmission is 56Bit */
+  #define ETH_MACCR_IFG_48Bit     ((uint32_t)0x000C0000)  /* Minimum IFG between frames during transmission is 48Bit */
+  #define ETH_MACCR_IFG_40Bit     ((uint32_t)0x000E0000)  /* Minimum IFG between frames during transmission is 40Bit */
+#define ETH_MACCR_CSD     ((uint32_t)0x00010000)  /* Carrier sense disable (during transmission) */
+#define ETH_MACCR_FES     ((uint32_t)0x00004000)  /* Fast ethernet speed */
+#define ETH_MACCR_ROD     ((uint32_t)0x00002000)  /* Receive own disable */
+#define ETH_MACCR_LM      ((uint32_t)0x00001000)  /* loopback mode */
+#define ETH_MACCR_DM      ((uint32_t)0x00000800)  /* Duplex mode */
+#define ETH_MACCR_IPCO    ((uint32_t)0x00000400)  /* IP Checksum offload */
+#define ETH_MACCR_RD      ((uint32_t)0x00000200)  /* Retry disable */
+#define ETH_MACCR_APCS    ((uint32_t)0x00000080)  /* Automatic Pad/CRC stripping */
+#define ETH_MACCR_BL      ((uint32_t)0x00000060)  /* Back-off limit: random integer number (r) of slot time delays before rescheduling
+                                                       a transmission attempt during retries after a collision: 0 =< r <2^k */
+  #define ETH_MACCR_BL_10    ((uint32_t)0x00000000)  /* k = min (n, 10) */
+  #define ETH_MACCR_BL_8     ((uint32_t)0x00000020)  /* k = min (n, 8) */
+  #define ETH_MACCR_BL_4     ((uint32_t)0x00000040)  /* k = min (n, 4) */
+  #define ETH_MACCR_BL_1     ((uint32_t)0x00000060)  /* k = min (n, 1) */
+#define ETH_MACCR_DC      ((uint32_t)0x00000010)  /* Defferal check */
+#define ETH_MACCR_TE      ((uint32_t)0x00000008)  /* Transmitter enable */
+#define ETH_MACCR_RE      ((uint32_t)0x00000004)  /* Receiver enable */
+
+/* Bit definition for Ethernet MAC Frame Filter Register */
+#define ETH_MACFFR_RA     ((uint32_t)0x80000000)  /* Receive all */
+#define ETH_MACFFR_HPF    ((uint32_t)0x00000400)  /* Hash or perfect filter */
+#define ETH_MACFFR_SAF    ((uint32_t)0x00000200)  /* Source address filter enable */
+#define ETH_MACFFR_SAIF   ((uint32_t)0x00000100)  /* SA inverse filtering */
+#define ETH_MACFFR_PCF    ((uint32_t)0x000000C0)  /* Pass control frames: 3 cases */
+  #define ETH_MACFFR_PCF_BlockAll                ((uint32_t)0x00000040)  /* MAC filters all control frames from reaching the application */
+  #define ETH_MACFFR_PCF_ForwardAll              ((uint32_t)0x00000080)  /* MAC forwards all control frames to application even if they fail the Address Filter */
+  #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0)  /* MAC forwards control frames that pass the Address Filter. */
+#define ETH_MACFFR_BFD    ((uint32_t)0x00000020)  /* Broadcast frame disable */
+#define ETH_MACFFR_PAM    ((uint32_t)0x00000010)  /* Pass all mutlicast */
+#define ETH_MACFFR_DAIF   ((uint32_t)0x00000008)  /* DA Inverse filtering */
+#define ETH_MACFFR_HM     ((uint32_t)0x00000004)  /* Hash multicast */
+#define ETH_MACFFR_HU     ((uint32_t)0x00000002)  /* Hash unicast */
+#define ETH_MACFFR_PM     ((uint32_t)0x00000001)  /* Promiscuous mode */
+
+/* Bit definition for Ethernet MAC Hash Table High Register */
+#define ETH_MACHTHR_HTH   ((uint32_t)0xFFFFFFFF)  /* Hash table high */
+
+/* Bit definition for Ethernet MAC Hash Table Low Register */
+#define ETH_MACHTLR_HTL   ((uint32_t)0xFFFFFFFF)  /* Hash table low */
+
+/* Bit definition for Ethernet MAC MII Address Register */
+#define ETH_MACMIIAR_PA   ((uint32_t)0x0000F800)  /* Physical layer address */
+#define ETH_MACMIIAR_MR   ((uint32_t)0x000007C0)  /* MII register in the selected PHY */
+#define ETH_MACMIIAR_CR   ((uint32_t)0x0000001C)  /* CR clock range: 6 cases */
+  #define ETH_MACMIIAR_CR_Div42   ((uint32_t)0x00000000)  /* HCLK:60-100 MHz; MDC clock= HCLK/42 */
+  #define ETH_MACMIIAR_CR_Div62   ((uint32_t)0x00000004)  /* HCLK:100-150 MHz; MDC clock= HCLK/62 */
+  #define ETH_MACMIIAR_CR_Div16   ((uint32_t)0x00000008)  /* HCLK:20-35 MHz; MDC clock= HCLK/16 */
+  #define ETH_MACMIIAR_CR_Div26   ((uint32_t)0x0000000C)  /* HCLK:35-60 MHz; MDC clock= HCLK/26 */
+  #define ETH_MACMIIAR_CR_Div102  ((uint32_t)0x00000010)  /* HCLK:150-168 MHz; MDC clock= HCLK/102 */
+#define ETH_MACMIIAR_MW   ((uint32_t)0x00000002)  /* MII write */
+#define ETH_MACMIIAR_MB   ((uint32_t)0x00000001)  /* MII busy */
+
+/* Bit definition for Ethernet MAC MII Data Register */
+#define ETH_MACMIIDR_MD   ((uint32_t)0x0000FFFF)  /* MII data: read/write data from/to PHY */
+
+/* Bit definition for Ethernet MAC Flow Control Register */
+#define ETH_MACFCR_PT     ((uint32_t)0xFFFF0000)  /* Pause time */
+#define ETH_MACFCR_ZQPD   ((uint32_t)0x00000080)  /* Zero-quanta pause disable */
+#define ETH_MACFCR_PLT    ((uint32_t)0x00000030)  /* Pause low threshold: 4 cases */
+  #define ETH_MACFCR_PLT_Minus4   ((uint32_t)0x00000000)  /* Pause time minus 4 slot times */
+  #define ETH_MACFCR_PLT_Minus28  ((uint32_t)0x00000010)  /* Pause time minus 28 slot times */
+  #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020)  /* Pause time minus 144 slot times */
+  #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030)  /* Pause time minus 256 slot times */
+#define ETH_MACFCR_UPFD   ((uint32_t)0x00000008)  /* Unicast pause frame detect */
+#define ETH_MACFCR_RFCE   ((uint32_t)0x00000004)  /* Receive flow control enable */
+#define ETH_MACFCR_TFCE   ((uint32_t)0x00000002)  /* Transmit flow control enable */
+#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001)  /* Flow control busy/backpressure activate */
+
+/* Bit definition for Ethernet MAC VLAN Tag Register */
+#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000)  /* 12-bit VLAN tag comparison */
+#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF)  /* VLAN tag identifier (for receive frames) */
+
+/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */
+#define ETH_MACRWUFFR_D   ((uint32_t)0xFFFFFFFF)  /* Wake-up frame filter register data */
+/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers.
+   Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */
+/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask
+   Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask
+   Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask
+   Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask
+   Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command -
+                              RSVD - Filter1 Command - RSVD - Filter0 Command
+   Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset
+   Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16
+   Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */
+
+/* Bit definition for Ethernet MAC PMT Control and Status Register */
+#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000)  /* Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_MACPMTCSR_GU     ((uint32_t)0x00000200)  /* Global Unicast */
+#define ETH_MACPMTCSR_WFR    ((uint32_t)0x00000040)  /* Wake-Up Frame Received */
+#define ETH_MACPMTCSR_MPR    ((uint32_t)0x00000020)  /* Magic Packet Received */
+#define ETH_MACPMTCSR_WFE    ((uint32_t)0x00000004)  /* Wake-Up Frame Enable */
+#define ETH_MACPMTCSR_MPE    ((uint32_t)0x00000002)  /* Magic Packet Enable */
+#define ETH_MACPMTCSR_PD     ((uint32_t)0x00000001)  /* Power Down */
+
+/* Bit definition for Ethernet MAC Status Register */
+#define ETH_MACSR_TSTS      ((uint32_t)0x00000200)  /* Time stamp trigger status */
+#define ETH_MACSR_MMCTS     ((uint32_t)0x00000040)  /* MMC transmit status */
+#define ETH_MACSR_MMMCRS    ((uint32_t)0x00000020)  /* MMC receive status */
+#define ETH_MACSR_MMCS      ((uint32_t)0x00000010)  /* MMC status */
+#define ETH_MACSR_PMTS      ((uint32_t)0x00000008)  /* PMT status */
+
+/* Bit definition for Ethernet MAC Interrupt Mask Register */
+#define ETH_MACIMR_TSTIM     ((uint32_t)0x00000200)  /* Time stamp trigger interrupt mask */
+#define ETH_MACIMR_PMTIM     ((uint32_t)0x00000008)  /* PMT interrupt mask */
+
+/* Bit definition for Ethernet MAC Address0 High Register */
+#define ETH_MACA0HR_MACA0H   ((uint32_t)0x0000FFFF)  /* MAC address0 high */
+
+/* Bit definition for Ethernet MAC Address0 Low Register */
+#define ETH_MACA0LR_MACA0L   ((uint32_t)0xFFFFFFFF)  /* MAC address0 low */
+
+/* Bit definition for Ethernet MAC Address1 High Register */
+#define ETH_MACA1HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA1HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA1HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control: bits to mask for comparison of the MAC Address bytes */
+  #define ETH_MACA1HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA1HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA1HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA1HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA1HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA1HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [7:0] */
+#define ETH_MACA1HR_MACA1H   ((uint32_t)0x0000FFFF)  /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address1 Low Register */
+#define ETH_MACA1LR_MACA1L   ((uint32_t)0xFFFFFFFF)  /* MAC address1 low */
+
+/* Bit definition for Ethernet MAC Address2 High Register */
+#define ETH_MACA2HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA2HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA2HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control */
+  #define ETH_MACA2HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA2HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA2HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA2HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA2HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA2HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA2HR_MACA2H   ((uint32_t)0x0000FFFF)  /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address2 Low Register */
+#define ETH_MACA2LR_MACA2L   ((uint32_t)0xFFFFFFFF)  /* MAC address2 low */
+
+/* Bit definition for Ethernet MAC Address3 High Register */
+#define ETH_MACA3HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA3HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA3HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control */
+  #define ETH_MACA3HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA3HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA3HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA3HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA3HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA3HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA3HR_MACA3H   ((uint32_t)0x0000FFFF)  /* MAC address3 high */
+
+/* Bit definition for Ethernet MAC Address3 Low Register */
+#define ETH_MACA3LR_MACA3L   ((uint32_t)0xFFFFFFFF)  /* MAC address3 low */
+
+/******************************************************************************/
+/*                Ethernet MMC Registers bits definition                      */
+/******************************************************************************/
+
+/* Bit definition for Ethernet MMC Contol Register */
+#define ETH_MMCCR_MCFHP      ((uint32_t)0x00000020)  /* MMC counter Full-Half preset */
+#define ETH_MMCCR_MCP        ((uint32_t)0x00000010)  /* MMC counter preset */
+#define ETH_MMCCR_MCF        ((uint32_t)0x00000008)  /* MMC Counter Freeze */
+#define ETH_MMCCR_ROR        ((uint32_t)0x00000004)  /* Reset on Read */
+#define ETH_MMCCR_CSR        ((uint32_t)0x00000002)  /* Counter Stop Rollover */
+#define ETH_MMCCR_CR         ((uint32_t)0x00000001)  /* Counters Reset */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Register */
+#define ETH_MMCRIR_RGUFS     ((uint32_t)0x00020000)  /* Set when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIR_RFAES     ((uint32_t)0x00000040)  /* Set when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIR_RFCES     ((uint32_t)0x00000020)  /* Set when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Register */
+#define ETH_MMCTIR_TGFS      ((uint32_t)0x00200000)  /* Set when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFMSCS   ((uint32_t)0x00008000)  /* Set when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFSCS    ((uint32_t)0x00004000)  /* Set when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */
+#define ETH_MMCRIMR_RGUFM    ((uint32_t)0x00020000)  /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFAEM    ((uint32_t)0x00000040)  /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFCEM    ((uint32_t)0x00000020)  /* Mask the interrupt when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */
+#define ETH_MMCTIMR_TGFM     ((uint32_t)0x00200000)  /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFMSCM  ((uint32_t)0x00008000)  /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFSCM   ((uint32_t)0x00004000)  /* Mask the interrupt when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */
+#define ETH_MMCTGFSCCR_TGFSCC     ((uint32_t)0xFFFFFFFF)  /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */
+#define ETH_MMCTGFMSCCR_TGFMSCC   ((uint32_t)0xFFFFFFFF)  /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */
+#define ETH_MMCTGFCR_TGFC    ((uint32_t)0xFFFFFFFF)  /* Number of good frames transmitted. */
+
+/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */
+#define ETH_MMCRFCECR_RFCEC  ((uint32_t)0xFFFFFFFF)  /* Number of frames received with CRC error. */
+
+/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */
+#define ETH_MMCRFAECR_RFAEC  ((uint32_t)0xFFFFFFFF)  /* Number of frames received with alignment (dribble) error */
+
+/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */
+#define ETH_MMCRGUFCR_RGUFC  ((uint32_t)0xFFFFFFFF)  /* Number of good unicast frames received. */
+
+/******************************************************************************/
+/*               Ethernet PTP Registers bits definition                       */
+/******************************************************************************/
+
+/* Bit definition for Ethernet PTP Time Stamp Contol Register */
+#define ETH_PTPTSCR_TSCNT       ((uint32_t)0x00030000)  /* Time stamp clock node type */
+#define ETH_PTPTSSR_TSSMRME     ((uint32_t)0x00008000)  /* Time stamp snapshot for message relevant to master enable */
+#define ETH_PTPTSSR_TSSEME      ((uint32_t)0x00004000)  /* Time stamp snapshot for event message enable */
+#define ETH_PTPTSSR_TSSIPV4FE   ((uint32_t)0x00002000)  /* Time stamp snapshot for IPv4 frames enable */
+#define ETH_PTPTSSR_TSSIPV6FE   ((uint32_t)0x00001000)  /* Time stamp snapshot for IPv6 frames enable */
+#define ETH_PTPTSSR_TSSPTPOEFE  ((uint32_t)0x00000800)  /* Time stamp snapshot for PTP over ethernet frames enable */
+#define ETH_PTPTSSR_TSPTPPSV2E  ((uint32_t)0x00000400)  /* Time stamp PTP packet snooping for version2 format enable */
+#define ETH_PTPTSSR_TSSSR       ((uint32_t)0x00000200)  /* Time stamp Sub-seconds rollover */
+#define ETH_PTPTSSR_TSSARFE     ((uint32_t)0x00000100)  /* Time stamp snapshot for all received frames enable */
+
+#define ETH_PTPTSCR_TSARU    ((uint32_t)0x00000020)  /* Addend register update */
+#define ETH_PTPTSCR_TSITE    ((uint32_t)0x00000010)  /* Time stamp interrupt trigger enable */
+#define ETH_PTPTSCR_TSSTU    ((uint32_t)0x00000008)  /* Time stamp update */
+#define ETH_PTPTSCR_TSSTI    ((uint32_t)0x00000004)  /* Time stamp initialize */
+#define ETH_PTPTSCR_TSFCU    ((uint32_t)0x00000002)  /* Time stamp fine or coarse update */
+#define ETH_PTPTSCR_TSE      ((uint32_t)0x00000001)  /* Time stamp enable */
+
+/* Bit definition for Ethernet PTP Sub-Second Increment Register */
+#define ETH_PTPSSIR_STSSI    ((uint32_t)0x000000FF)  /* System time Sub-second increment value */
+
+/* Bit definition for Ethernet PTP Time Stamp High Register */
+#define ETH_PTPTSHR_STS      ((uint32_t)0xFFFFFFFF)  /* System Time second */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Register */
+#define ETH_PTPTSLR_STPNS    ((uint32_t)0x80000000)  /* System Time Positive or negative time */
+#define ETH_PTPTSLR_STSS     ((uint32_t)0x7FFFFFFF)  /* System Time sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp High Update Register */
+#define ETH_PTPTSHUR_TSUS    ((uint32_t)0xFFFFFFFF)  /* Time stamp update seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Update Register */
+#define ETH_PTPTSLUR_TSUPNS  ((uint32_t)0x80000000)  /* Time stamp update Positive or negative time */
+#define ETH_PTPTSLUR_TSUSS   ((uint32_t)0x7FFFFFFF)  /* Time stamp update sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Addend Register */
+#define ETH_PTPTSAR_TSA      ((uint32_t)0xFFFFFFFF)  /* Time stamp addend */
+
+/* Bit definition for Ethernet PTP Target Time High Register */
+#define ETH_PTPTTHR_TTSH     ((uint32_t)0xFFFFFFFF)  /* Target time stamp high */
+
+/* Bit definition for Ethernet PTP Target Time Low Register */
+#define ETH_PTPTTLR_TTSL     ((uint32_t)0xFFFFFFFF)  /* Target time stamp low */
+
+/* Bit definition for Ethernet PTP Time Stamp Status Register */
+#define ETH_PTPTSSR_TSTTR    ((uint32_t)0x00000020)  /* Time stamp target time reached */
+#define ETH_PTPTSSR_TSSO     ((uint32_t)0x00000010)  /* Time stamp seconds overflow */
+
+/******************************************************************************/
+/*                 Ethernet DMA Registers bits definition                     */
+/******************************************************************************/
+
+/* Bit definition for Ethernet DMA Bus Mode Register */
+#define ETH_DMABMR_AAB       ((uint32_t)0x02000000)  /* Address-Aligned beats */
+#define ETH_DMABMR_FPM        ((uint32_t)0x01000000)  /* 4xPBL mode */
+#define ETH_DMABMR_USP       ((uint32_t)0x00800000)  /* Use separate PBL */
+#define ETH_DMABMR_RDP       ((uint32_t)0x007E0000)  /* RxDMA PBL */
+  #define ETH_DMABMR_RDP_1Beat    ((uint32_t)0x00020000)  /* maximum number of beats to be transferred in one RxDMA transaction is 1 */
+  #define ETH_DMABMR_RDP_2Beat    ((uint32_t)0x00040000)  /* maximum number of beats to be transferred in one RxDMA transaction is 2 */
+  #define ETH_DMABMR_RDP_4Beat    ((uint32_t)0x00080000)  /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+  #define ETH_DMABMR_RDP_8Beat    ((uint32_t)0x00100000)  /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+  #define ETH_DMABMR_RDP_16Beat   ((uint32_t)0x00200000)  /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+  #define ETH_DMABMR_RDP_32Beat   ((uint32_t)0x00400000)  /* maximum number of beats to be transferred in one RxDMA transaction is 32 */
+  #define ETH_DMABMR_RDP_4xPBL_4Beat   ((uint32_t)0x01020000)  /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+  #define ETH_DMABMR_RDP_4xPBL_8Beat   ((uint32_t)0x01040000)  /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+  #define ETH_DMABMR_RDP_4xPBL_16Beat  ((uint32_t)0x01080000)  /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+  #define ETH_DMABMR_RDP_4xPBL_32Beat  ((uint32_t)0x01100000)  /* maximum number of beats to be transferred in one RxDMA transaction is 32 */
+  #define ETH_DMABMR_RDP_4xPBL_64Beat  ((uint32_t)0x01200000)  /* maximum number of beats to be transferred in one RxDMA transaction is 64 */
+  #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000)  /* maximum number of beats to be transferred in one RxDMA transaction is 128 */
+#define ETH_DMABMR_FB        ((uint32_t)0x00010000)  /* Fixed Burst */
+#define ETH_DMABMR_RTPR      ((uint32_t)0x0000C000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_1_1     ((uint32_t)0x00000000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_2_1     ((uint32_t)0x00004000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_3_1     ((uint32_t)0x00008000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_4_1     ((uint32_t)0x0000C000)  /* Rx Tx priority ratio */
+#define ETH_DMABMR_PBL    ((uint32_t)0x00003F00)  /* Programmable burst length */
+  #define ETH_DMABMR_PBL_1Beat    ((uint32_t)0x00000100)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+  #define ETH_DMABMR_PBL_2Beat    ((uint32_t)0x00000200)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+  #define ETH_DMABMR_PBL_4Beat    ((uint32_t)0x00000400)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+  #define ETH_DMABMR_PBL_8Beat    ((uint32_t)0x00000800)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+  #define ETH_DMABMR_PBL_16Beat   ((uint32_t)0x00001000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+  #define ETH_DMABMR_PBL_32Beat   ((uint32_t)0x00002000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+  #define ETH_DMABMR_PBL_4xPBL_4Beat   ((uint32_t)0x01000100)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+  #define ETH_DMABMR_PBL_4xPBL_8Beat   ((uint32_t)0x01000200)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+  #define ETH_DMABMR_PBL_4xPBL_16Beat  ((uint32_t)0x01000400)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+  #define ETH_DMABMR_PBL_4xPBL_32Beat  ((uint32_t)0x01000800)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+  #define ETH_DMABMR_PBL_4xPBL_64Beat  ((uint32_t)0x01001000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+  #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+#define ETH_DMABMR_EDE       ((uint32_t)0x00000080)  /* Enhanced Descriptor Enable */
+#define ETH_DMABMR_DSL       ((uint32_t)0x0000007C)  /* Descriptor Skip Length */
+#define ETH_DMABMR_DA        ((uint32_t)0x00000002)  /* DMA arbitration scheme */
+#define ETH_DMABMR_SR        ((uint32_t)0x00000001)  /* Software reset */
+
+/* Bit definition for Ethernet DMA Transmit Poll Demand Register */
+#define ETH_DMATPDR_TPD      ((uint32_t)0xFFFFFFFF)  /* Transmit poll demand */
+
+/* Bit definition for Ethernet DMA Receive Poll Demand Register */
+#define ETH_DMARPDR_RPD      ((uint32_t)0xFFFFFFFF)  /* Receive poll demand  */
+
+/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */
+#define ETH_DMARDLAR_SRL     ((uint32_t)0xFFFFFFFF)  /* Start of receive list */
+
+/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */
+#define ETH_DMATDLAR_STL     ((uint32_t)0xFFFFFFFF)  /* Start of transmit list */
+
+/* Bit definition for Ethernet DMA Status Register */
+#define ETH_DMASR_TSTS       ((uint32_t)0x20000000)  /* Time-stamp trigger status */
+#define ETH_DMASR_PMTS       ((uint32_t)0x10000000)  /* PMT status */
+#define ETH_DMASR_MMCS       ((uint32_t)0x08000000)  /* MMC status */
+#define ETH_DMASR_EBS        ((uint32_t)0x03800000)  /* Error bits status */
+  /* combination with EBS[2:0] for GetFlagStatus function */
+  #define ETH_DMASR_EBS_DescAccess      ((uint32_t)0x02000000)  /* Error bits 0-data buffer, 1-desc. access */
+  #define ETH_DMASR_EBS_ReadTransf      ((uint32_t)0x01000000)  /* Error bits 0-write trnsf, 1-read transfr */
+  #define ETH_DMASR_EBS_DataTransfTx    ((uint32_t)0x00800000)  /* Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMASR_TPS         ((uint32_t)0x00700000)  /* Transmit process state */
+  #define ETH_DMASR_TPS_Stopped         ((uint32_t)0x00000000)  /* Stopped - Reset or Stop Tx Command issued  */
+  #define ETH_DMASR_TPS_Fetching        ((uint32_t)0x00100000)  /* Running - fetching the Tx descriptor */
+  #define ETH_DMASR_TPS_Waiting         ((uint32_t)0x00200000)  /* Running - waiting for status */
+  #define ETH_DMASR_TPS_Reading         ((uint32_t)0x00300000)  /* Running - reading the data from host memory */
+  #define ETH_DMASR_TPS_Suspended       ((uint32_t)0x00600000)  /* Suspended - Tx Descriptor unavailabe */
+  #define ETH_DMASR_TPS_Closing         ((uint32_t)0x00700000)  /* Running - closing Rx descriptor */
+#define ETH_DMASR_RPS         ((uint32_t)0x000E0000)  /* Receive process state */
+  #define ETH_DMASR_RPS_Stopped         ((uint32_t)0x00000000)  /* Stopped - Reset or Stop Rx Command issued */
+  #define ETH_DMASR_RPS_Fetching        ((uint32_t)0x00020000)  /* Running - fetching the Rx descriptor */
+  #define ETH_DMASR_RPS_Waiting         ((uint32_t)0x00060000)  /* Running - waiting for packet */
+  #define ETH_DMASR_RPS_Suspended       ((uint32_t)0x00080000)  /* Suspended - Rx Descriptor unavailable */
+  #define ETH_DMASR_RPS_Closing         ((uint32_t)0x000A0000)  /* Running - closing descriptor */
+  #define ETH_DMASR_RPS_Queuing         ((uint32_t)0x000E0000)  /* Running - queuing the recieve frame into host memory */
+#define ETH_DMASR_NIS        ((uint32_t)0x00010000)  /* Normal interrupt summary */
+#define ETH_DMASR_AIS        ((uint32_t)0x00008000)  /* Abnormal interrupt summary */
+#define ETH_DMASR_ERS        ((uint32_t)0x00004000)  /* Early receive status */
+#define ETH_DMASR_FBES       ((uint32_t)0x00002000)  /* Fatal bus error status */
+#define ETH_DMASR_ETS        ((uint32_t)0x00000400)  /* Early transmit status */
+#define ETH_DMASR_RWTS       ((uint32_t)0x00000200)  /* Receive watchdog timeout status */
+#define ETH_DMASR_RPSS       ((uint32_t)0x00000100)  /* Receive process stopped status */
+#define ETH_DMASR_RBUS       ((uint32_t)0x00000080)  /* Receive buffer unavailable status */
+#define ETH_DMASR_RS         ((uint32_t)0x00000040)  /* Receive status */
+#define ETH_DMASR_TUS        ((uint32_t)0x00000020)  /* Transmit underflow status */
+#define ETH_DMASR_ROS        ((uint32_t)0x00000010)  /* Receive overflow status */
+#define ETH_DMASR_TJTS       ((uint32_t)0x00000008)  /* Transmit jabber timeout status */
+#define ETH_DMASR_TBUS       ((uint32_t)0x00000004)  /* Transmit buffer unavailable status */
+#define ETH_DMASR_TPSS       ((uint32_t)0x00000002)  /* Transmit process stopped status */
+#define ETH_DMASR_TS         ((uint32_t)0x00000001)  /* Transmit status */
+
+/* Bit definition for Ethernet DMA Operation Mode Register */
+#define ETH_DMAOMR_DTCEFD    ((uint32_t)0x04000000)  /* Disable Dropping of TCP/IP checksum error frames */
+#define ETH_DMAOMR_RSF       ((uint32_t)0x02000000)  /* Receive store and forward */
+#define ETH_DMAOMR_DFRF      ((uint32_t)0x01000000)  /* Disable flushing of received frames */
+#define ETH_DMAOMR_TSF       ((uint32_t)0x00200000)  /* Transmit store and forward */
+#define ETH_DMAOMR_FTF       ((uint32_t)0x00100000)  /* Flush transmit FIFO */
+#define ETH_DMAOMR_TTC       ((uint32_t)0x0001C000)  /* Transmit threshold control */
+  #define ETH_DMAOMR_TTC_64Bytes       ((uint32_t)0x00000000)  /* threshold level of the MTL Transmit FIFO is 64 Bytes */
+  #define ETH_DMAOMR_TTC_128Bytes      ((uint32_t)0x00004000)  /* threshold level of the MTL Transmit FIFO is 128 Bytes */
+  #define ETH_DMAOMR_TTC_192Bytes      ((uint32_t)0x00008000)  /* threshold level of the MTL Transmit FIFO is 192 Bytes */
+  #define ETH_DMAOMR_TTC_256Bytes      ((uint32_t)0x0000C000)  /* threshold level of the MTL Transmit FIFO is 256 Bytes */
+  #define ETH_DMAOMR_TTC_40Bytes       ((uint32_t)0x00010000)  /* threshold level of the MTL Transmit FIFO is 40 Bytes */
+  #define ETH_DMAOMR_TTC_32Bytes       ((uint32_t)0x00014000)  /* threshold level of the MTL Transmit FIFO is 32 Bytes */
+  #define ETH_DMAOMR_TTC_24Bytes       ((uint32_t)0x00018000)  /* threshold level of the MTL Transmit FIFO is 24 Bytes */
+  #define ETH_DMAOMR_TTC_16Bytes       ((uint32_t)0x0001C000)  /* threshold level of the MTL Transmit FIFO is 16 Bytes */
+#define ETH_DMAOMR_ST        ((uint32_t)0x00002000)  /* Start/stop transmission command */
+#define ETH_DMAOMR_FEF       ((uint32_t)0x00000080)  /* Forward error frames */
+#define ETH_DMAOMR_FUGF      ((uint32_t)0x00000040)  /* Forward undersized good frames */
+#define ETH_DMAOMR_RTC       ((uint32_t)0x00000018)  /* receive threshold control */
+  #define ETH_DMAOMR_RTC_64Bytes       ((uint32_t)0x00000000)  /* threshold level of the MTL Receive FIFO is 64 Bytes */
+  #define ETH_DMAOMR_RTC_32Bytes       ((uint32_t)0x00000008)  /* threshold level of the MTL Receive FIFO is 32 Bytes */
+  #define ETH_DMAOMR_RTC_96Bytes       ((uint32_t)0x00000010)  /* threshold level of the MTL Receive FIFO is 96 Bytes */
+  #define ETH_DMAOMR_RTC_128Bytes      ((uint32_t)0x00000018)  /* threshold level of the MTL Receive FIFO is 128 Bytes */
+#define ETH_DMAOMR_OSF       ((uint32_t)0x00000004)  /* operate on second frame */
+#define ETH_DMAOMR_SR        ((uint32_t)0x00000002)  /* Start/stop receive */
+
+/* Bit definition for Ethernet DMA Interrupt Enable Register */
+#define ETH_DMAIER_NISE      ((uint32_t)0x00010000)  /* Normal interrupt summary enable */
+#define ETH_DMAIER_AISE      ((uint32_t)0x00008000)  /* Abnormal interrupt summary enable */
+#define ETH_DMAIER_ERIE      ((uint32_t)0x00004000)  /* Early receive interrupt enable */
+#define ETH_DMAIER_FBEIE     ((uint32_t)0x00002000)  /* Fatal bus error interrupt enable */
+#define ETH_DMAIER_ETIE      ((uint32_t)0x00000400)  /* Early transmit interrupt enable */
+#define ETH_DMAIER_RWTIE     ((uint32_t)0x00000200)  /* Receive watchdog timeout interrupt enable */
+#define ETH_DMAIER_RPSIE     ((uint32_t)0x00000100)  /* Receive process stopped interrupt enable */
+#define ETH_DMAIER_RBUIE     ((uint32_t)0x00000080)  /* Receive buffer unavailable interrupt enable */
+#define ETH_DMAIER_RIE       ((uint32_t)0x00000040)  /* Receive interrupt enable */
+#define ETH_DMAIER_TUIE      ((uint32_t)0x00000020)  /* Transmit Underflow interrupt enable */
+#define ETH_DMAIER_ROIE      ((uint32_t)0x00000010)  /* Receive Overflow interrupt enable */
+#define ETH_DMAIER_TJTIE     ((uint32_t)0x00000008)  /* Transmit jabber timeout interrupt enable */
+#define ETH_DMAIER_TBUIE     ((uint32_t)0x00000004)  /* Transmit buffer unavailable interrupt enable */
+#define ETH_DMAIER_TPSIE     ((uint32_t)0x00000002)  /* Transmit process stopped interrupt enable */
+#define ETH_DMAIER_TIE       ((uint32_t)0x00000001)  /* Transmit interrupt enable */
+
+/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */
+#define ETH_DMAMFBOCR_OFOC   ((uint32_t)0x10000000)  /* Overflow bit for FIFO overflow counter */
+#define ETH_DMAMFBOCR_MFA    ((uint32_t)0x0FFE0000)  /* Number of frames missed by the application */
+#define ETH_DMAMFBOCR_OMFC   ((uint32_t)0x00010000)  /* Overflow bit for missed frame counter */
+#define ETH_DMAMFBOCR_MFC    ((uint32_t)0x0000FFFF)  /* Number of frames missed by the controller */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */
+#define ETH_DMACHTDR_HTDAP   ((uint32_t)0xFFFFFFFF)  /* Host transmit descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */
+#define ETH_DMACHRDR_HRDAP   ((uint32_t)0xFFFFFFFF)  /* Host receive descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */
+#define ETH_DMACHTBAR_HTBAP  ((uint32_t)0xFFFFFFFF)  /* Host transmit buffer address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */
+#define ETH_DMACHRBAR_HRBAP  ((uint32_t)0xFFFFFFFF)  /* Host receive buffer address pointer */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                       USB_OTG			                        */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition forUSB_OTG_GOTGCTL register  ********************/
+#define USB_OTG_GOTGCTL_SRQSCS                  ((uint32_t)0x00000001)            /*!< Session request success  */
+#define USB_OTG_GOTGCTL_SRQ                     ((uint32_t)0x00000002)            /*!< Session request          */
+#define USB_OTG_GOTGCTL_HNGSCS                  ((uint32_t)0x00000100)            /*!< Host negotiation success */
+#define USB_OTG_GOTGCTL_HNPRQ                   ((uint32_t)0x00000200)            /*!< HNP request              */
+#define USB_OTG_GOTGCTL_HSHNPEN                 ((uint32_t)0x00000400)            /*!< Host set HNP enable      */
+#define USB_OTG_GOTGCTL_DHNPEN                  ((uint32_t)0x00000800)            /*!< Device HNP enabled       */
+#define USB_OTG_GOTGCTL_CIDSTS                  ((uint32_t)0x00010000)            /*!< Connector ID status      */
+#define USB_OTG_GOTGCTL_DBCT                    ((uint32_t)0x00020000)            /*!< Long/short debounce time */
+#define USB_OTG_GOTGCTL_ASVLD                   ((uint32_t)0x00040000)            /*!< A-session valid          */
+#define USB_OTG_GOTGCTL_BSVLD                   ((uint32_t)0x00080000)            /*!< B-session valid          */
+
+/********************  Bit definition forUSB_OTG_HCFG register  ********************/
+
+#define USB_OTG_HCFG_FSLSPCS                 ((uint32_t)0x00000003)            /*!< FS/LS PHY clock select  */
+#define USB_OTG_HCFG_FSLSPCS_0               ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_HCFG_FSLSPCS_1               ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_HCFG_FSLSS                   ((uint32_t)0x00000004)            /*!< FS- and LS-only support */
+
+/********************  Bit definition forUSB_OTG_DCFG register  ********************/
+
+#define USB_OTG_DCFG_DSPD                    ((uint32_t)0x00000003)            /*!< Device speed */
+#define USB_OTG_DCFG_DSPD_0                  ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_DCFG_DSPD_1                  ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_DCFG_NZLSOHSK                ((uint32_t)0x00000004)            /*!< Nonzero-length status OUT handshake */
+
+#define USB_OTG_DCFG_DAD                     ((uint32_t)0x000007F0)            /*!< Device address */
+#define USB_OTG_DCFG_DAD_0                   ((uint32_t)0x00000010)            /*!<Bit 0 */
+#define USB_OTG_DCFG_DAD_1                   ((uint32_t)0x00000020)            /*!<Bit 1 */
+#define USB_OTG_DCFG_DAD_2                   ((uint32_t)0x00000040)            /*!<Bit 2 */
+#define USB_OTG_DCFG_DAD_3                   ((uint32_t)0x00000080)            /*!<Bit 3 */
+#define USB_OTG_DCFG_DAD_4                   ((uint32_t)0x00000100)            /*!<Bit 4 */
+#define USB_OTG_DCFG_DAD_5                   ((uint32_t)0x00000200)            /*!<Bit 5 */
+#define USB_OTG_DCFG_DAD_6                   ((uint32_t)0x00000400)            /*!<Bit 6 */
+
+#define USB_OTG_DCFG_PFIVL                   ((uint32_t)0x00001800)            /*!< Periodic (micro)frame interval */
+#define USB_OTG_DCFG_PFIVL_0                 ((uint32_t)0x00000800)            /*!<Bit 0 */
+#define USB_OTG_DCFG_PFIVL_1                 ((uint32_t)0x00001000)            /*!<Bit 1 */
+
+#define USB_OTG_DCFG_PERSCHIVL               ((uint32_t)0x03000000)            /*!< Periodic scheduling interval */
+#define USB_OTG_DCFG_PERSCHIVL_0             ((uint32_t)0x01000000)            /*!<Bit 0 */
+#define USB_OTG_DCFG_PERSCHIVL_1             ((uint32_t)0x02000000)            /*!<Bit 1 */
+
+/********************  Bit definition forUSB_OTG_PCGCR register  ********************/
+#define USB_OTG_PCGCR_STPPCLK                 ((uint32_t)0x00000001)            /*!< Stop PHY clock */
+#define USB_OTG_PCGCR_GATEHCLK                ((uint32_t)0x00000002)            /*!< Gate HCLK */
+#define USB_OTG_PCGCR_PHYSUSP                 ((uint32_t)0x00000010)            /*!< PHY suspended */
+
+/********************  Bit definition forUSB_OTG_GOTGINT register  ********************/
+#define USB_OTG_GOTGINT_SEDET                   ((uint32_t)0x00000004)            /*!< Session end detected                   */
+#define USB_OTG_GOTGINT_SRSSCHG                 ((uint32_t)0x00000100)            /*!< Session request success status change  */
+#define USB_OTG_GOTGINT_HNSSCHG                 ((uint32_t)0x00000200)            /*!< Host negotiation success status change */
+#define USB_OTG_GOTGINT_HNGDET                  ((uint32_t)0x00020000)            /*!< Host negotiation detected              */
+#define USB_OTG_GOTGINT_ADTOCHG                 ((uint32_t)0x00040000)            /*!< A-device timeout change                */
+#define USB_OTG_GOTGINT_DBCDNE                  ((uint32_t)0x00080000)            /*!< Debounce done                          */
+
+/********************  Bit definition forUSB_OTG_DCTL register  ********************/
+#define USB_OTG_DCTL_RWUSIG                  ((uint32_t)0x00000001)            /*!< Remote wakeup signaling */
+#define USB_OTG_DCTL_SDIS                    ((uint32_t)0x00000002)            /*!< Soft disconnect         */
+#define USB_OTG_DCTL_GINSTS                  ((uint32_t)0x00000004)            /*!< Global IN NAK status    */
+#define USB_OTG_DCTL_GONSTS                  ((uint32_t)0x00000008)            /*!< Global OUT NAK status   */
+
+#define USB_OTG_DCTL_TCTL                    ((uint32_t)0x00000070)            /*!< Test control */
+#define USB_OTG_DCTL_TCTL_0                  ((uint32_t)0x00000010)            /*!<Bit 0 */
+#define USB_OTG_DCTL_TCTL_1                  ((uint32_t)0x00000020)            /*!<Bit 1 */
+#define USB_OTG_DCTL_TCTL_2                  ((uint32_t)0x00000040)            /*!<Bit 2 */
+#define USB_OTG_DCTL_SGINAK                  ((uint32_t)0x00000080)            /*!< Set global IN NAK         */
+#define USB_OTG_DCTL_CGINAK                  ((uint32_t)0x00000100)            /*!< Clear global IN NAK       */
+#define USB_OTG_DCTL_SGONAK                  ((uint32_t)0x00000200)            /*!< Set global OUT NAK        */
+#define USB_OTG_DCTL_CGONAK                  ((uint32_t)0x00000400)            /*!< Clear global OUT NAK      */
+#define USB_OTG_DCTL_POPRGDNE                ((uint32_t)0x00000800)            /*!< Power-on programming done */
+
+/********************  Bit definition forUSB_OTG_HFIR register  ********************/
+#define USB_OTG_HFIR_FRIVL                   ((uint32_t)0x0000FFFF)            /*!< Frame interval */
+
+/********************  Bit definition forUSB_OTG_HFNUM register  ********************/
+#define USB_OTG_HFNUM_FRNUM                   ((uint32_t)0x0000FFFF)            /*!< Frame number         */
+#define USB_OTG_HFNUM_FTREM                   ((uint32_t)0xFFFF0000)            /*!< Frame time remaining */
+
+/********************  Bit definition forUSB_OTG_DSTS register  ********************/
+#define USB_OTG_DSTS_SUSPSTS                 ((uint32_t)0x00000001)            /*!< Suspend status   */
+
+#define USB_OTG_DSTS_ENUMSPD                 ((uint32_t)0x00000006)            /*!< Enumerated speed */
+#define USB_OTG_DSTS_ENUMSPD_0               ((uint32_t)0x00000002)            /*!<Bit 0 */
+#define USB_OTG_DSTS_ENUMSPD_1               ((uint32_t)0x00000004)            /*!<Bit 1 */
+#define USB_OTG_DSTS_EERR                    ((uint32_t)0x00000008)            /*!< Erratic error     */
+#define USB_OTG_DSTS_FNSOF                   ((uint32_t)0x003FFF00)            /*!< Frame number of the received SOF */
+
+/********************  Bit definition forUSB_OTG_GAHBCFG register  ********************/
+#define USB_OTG_GAHBCFG_GINT                    ((uint32_t)0x00000001)            /*!< Global interrupt mask */
+
+#define USB_OTG_GAHBCFG_HBSTLEN                 ((uint32_t)0x0000001E)            /*!< Burst length/type */
+#define USB_OTG_GAHBCFG_HBSTLEN_0               ((uint32_t)0x00000002)            /*!<Bit 0 */
+#define USB_OTG_GAHBCFG_HBSTLEN_1               ((uint32_t)0x00000004)            /*!<Bit 1 */
+#define USB_OTG_GAHBCFG_HBSTLEN_2               ((uint32_t)0x00000008)            /*!<Bit 2 */
+#define USB_OTG_GAHBCFG_HBSTLEN_3               ((uint32_t)0x00000010)            /*!<Bit 3 */
+#define USB_OTG_GAHBCFG_DMAEN                   ((uint32_t)0x00000020)            /*!< DMA enable */
+#define USB_OTG_GAHBCFG_TXFELVL                 ((uint32_t)0x00000080)            /*!< TxFIFO empty level */
+#define USB_OTG_GAHBCFG_PTXFELVL                ((uint32_t)0x00000100)            /*!< Periodic TxFIFO empty level */
+
+/********************  Bit definition forUSB_OTG_GUSBCFG register  ********************/
+
+#define USB_OTG_GUSBCFG_TOCAL                   ((uint32_t)0x00000007)            /*!< FS timeout calibration */
+#define USB_OTG_GUSBCFG_TOCAL_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TOCAL_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TOCAL_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_PHYSEL                  ((uint32_t)0x00000040)            /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */
+#define USB_OTG_GUSBCFG_SRPCAP                  ((uint32_t)0x00000100)            /*!< SRP-capable */
+#define USB_OTG_GUSBCFG_HNPCAP                  ((uint32_t)0x00000200)            /*!< HNP-capable */
+
+#define USB_OTG_GUSBCFG_TRDT                    ((uint32_t)0x00003C00)            /*!< USB turnaround time */
+#define USB_OTG_GUSBCFG_TRDT_0                  ((uint32_t)0x00000400)            /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TRDT_1                  ((uint32_t)0x00000800)            /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TRDT_2                  ((uint32_t)0x00001000)            /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_TRDT_3                  ((uint32_t)0x00002000)            /*!<Bit 3 */
+#define USB_OTG_GUSBCFG_PHYLPCS                 ((uint32_t)0x00008000)            /*!< PHY Low-power clock select */
+#define USB_OTG_GUSBCFG_ULPIFSLS                ((uint32_t)0x00020000)            /*!< ULPI FS/LS select               */
+#define USB_OTG_GUSBCFG_ULPIAR                  ((uint32_t)0x00040000)            /*!< ULPI Auto-resume                */
+#define USB_OTG_GUSBCFG_ULPICSM                 ((uint32_t)0x00080000)            /*!< ULPI Clock SuspendM             */
+#define USB_OTG_GUSBCFG_ULPIEVBUSD              ((uint32_t)0x00100000)            /*!< ULPI External VBUS Drive        */
+#define USB_OTG_GUSBCFG_ULPIEVBUSI              ((uint32_t)0x00200000)            /*!< ULPI external VBUS indicator    */
+#define USB_OTG_GUSBCFG_TSDPS                   ((uint32_t)0x00400000)            /*!< TermSel DLine pulsing selection */
+#define USB_OTG_GUSBCFG_PCCI                    ((uint32_t)0x00800000)            /*!< Indicator complement            */
+#define USB_OTG_GUSBCFG_PTCI                    ((uint32_t)0x01000000)            /*!< Indicator pass through          */
+#define USB_OTG_GUSBCFG_ULPIIPD                 ((uint32_t)0x02000000)            /*!< ULPI interface protect disable  */
+#define USB_OTG_GUSBCFG_FHMOD                   ((uint32_t)0x20000000)            /*!< Forced host mode                */
+#define USB_OTG_GUSBCFG_FDMOD                   ((uint32_t)0x40000000)            /*!< Forced peripheral mode          */
+#define USB_OTG_GUSBCFG_CTXPKT                  ((uint32_t)0x80000000)            /*!< Corrupt Tx packet               */
+
+/********************  Bit definition forUSB_OTG_GRSTCTL register  ********************/
+#define USB_OTG_GRSTCTL_CSRST                   ((uint32_t)0x00000001)            /*!< Core soft reset          */
+#define USB_OTG_GRSTCTL_HSRST                   ((uint32_t)0x00000002)            /*!< HCLK soft reset          */
+#define USB_OTG_GRSTCTL_FCRST                   ((uint32_t)0x00000004)            /*!< Host frame counter reset */
+#define USB_OTG_GRSTCTL_RXFFLSH                 ((uint32_t)0x00000010)            /*!< RxFIFO flush             */
+#define USB_OTG_GRSTCTL_TXFFLSH                 ((uint32_t)0x00000020)            /*!< TxFIFO flush             */
+
+#define USB_OTG_GRSTCTL_TXFNUM                  ((uint32_t)0x000007C0)            /*!< TxFIFO number */
+#define USB_OTG_GRSTCTL_TXFNUM_0                ((uint32_t)0x00000040)            /*!<Bit 0 */
+#define USB_OTG_GRSTCTL_TXFNUM_1                ((uint32_t)0x00000080)            /*!<Bit 1 */
+#define USB_OTG_GRSTCTL_TXFNUM_2                ((uint32_t)0x00000100)            /*!<Bit 2 */
+#define USB_OTG_GRSTCTL_TXFNUM_3                ((uint32_t)0x00000200)            /*!<Bit 3 */
+#define USB_OTG_GRSTCTL_TXFNUM_4                ((uint32_t)0x00000400)            /*!<Bit 4 */
+#define USB_OTG_GRSTCTL_DMAREQ                  ((uint32_t)0x40000000)            /*!< DMA request signal */
+#define USB_OTG_GRSTCTL_AHBIDL                  ((uint32_t)0x80000000)            /*!< AHB master idle */
+
+/********************  Bit definition forUSB_OTG_DIEPMSK register  ********************/
+#define USB_OTG_DIEPMSK_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed interrupt mask                 */
+#define USB_OTG_DIEPMSK_EPDM                    ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt mask                  */
+#define USB_OTG_DIEPMSK_TOM                     ((uint32_t)0x00000008)            /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPMSK_ITTXFEMSK               ((uint32_t)0x00000010)            /*!< IN token received when TxFIFO empty mask          */
+#define USB_OTG_DIEPMSK_INEPNMM                 ((uint32_t)0x00000020)            /*!< IN token received with EP mismatch mask           */
+#define USB_OTG_DIEPMSK_INEPNEM                 ((uint32_t)0x00000040)            /*!< IN endpoint NAK effective mask                    */
+#define USB_OTG_DIEPMSK_TXFURM                  ((uint32_t)0x00000100)            /*!< FIFO underrun mask                                */
+#define USB_OTG_DIEPMSK_BIM                     ((uint32_t)0x00000200)            /*!< BNA interrupt mask                                */
+
+/********************  Bit definition forUSB_OTG_HPTXSTS register  ********************/
+#define USB_OTG_HPTXSTS_PTXFSAVL                ((uint32_t)0x0000FFFF)            /*!< Periodic transmit data FIFO space available     */
+
+#define USB_OTG_HPTXSTS_PTXQSAV                 ((uint32_t)0x00FF0000)            /*!< Periodic transmit request queue space available */
+#define USB_OTG_HPTXSTS_PTXQSAV_0               ((uint32_t)0x00010000)            /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQSAV_1               ((uint32_t)0x00020000)            /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQSAV_2               ((uint32_t)0x00040000)            /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQSAV_3               ((uint32_t)0x00080000)            /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQSAV_4               ((uint32_t)0x00100000)            /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQSAV_5               ((uint32_t)0x00200000)            /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQSAV_6               ((uint32_t)0x00400000)            /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQSAV_7               ((uint32_t)0x00800000)            /*!<Bit 7 */
+
+#define USB_OTG_HPTXSTS_PTXQTOP                 ((uint32_t)0xFF000000)            /*!< Top of the periodic transmit request queue */
+#define USB_OTG_HPTXSTS_PTXQTOP_0               ((uint32_t)0x01000000)            /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQTOP_1               ((uint32_t)0x02000000)            /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQTOP_2               ((uint32_t)0x04000000)            /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQTOP_3               ((uint32_t)0x08000000)            /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQTOP_4               ((uint32_t)0x10000000)            /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQTOP_5               ((uint32_t)0x20000000)            /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQTOP_6               ((uint32_t)0x40000000)            /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQTOP_7               ((uint32_t)0x80000000)            /*!<Bit 7 */
+
+/********************  Bit definition forUSB_OTG_HAINT register  ********************/
+#define USB_OTG_HAINT_HAINT                   ((uint32_t)0x0000FFFF)            /*!< Channel interrupts */
+
+/********************  Bit definition forUSB_OTG_DOEPMSK register  ********************/
+#define USB_OTG_DOEPMSK_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPMSK_EPDM                    ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt mask               */
+#define USB_OTG_DOEPMSK_STUPM                   ((uint32_t)0x00000008)            /*!< SETUP phase done mask                          */
+#define USB_OTG_DOEPMSK_OTEPDM                  ((uint32_t)0x00000010)            /*!< OUT token received when endpoint disabled mask */
+#define USB_OTG_DOEPMSK_B2BSTUP                 ((uint32_t)0x00000040)            /*!< Back-to-back SETUP packets received mask       */
+#define USB_OTG_DOEPMSK_OPEM                    ((uint32_t)0x00000100)            /*!< OUT packet error mask                          */
+#define USB_OTG_DOEPMSK_BOIM                    ((uint32_t)0x00000200)            /*!< BNA interrupt mask                             */
+
+/********************  Bit definition forUSB_OTG_GINTSTS register  ********************/
+#define USB_OTG_GINTSTS_CMOD                    ((uint32_t)0x00000001)            /*!< Current mode of operation           */
+#define USB_OTG_GINTSTS_MMIS                    ((uint32_t)0x00000002)            /*!< Mode mismatch interrupt             */
+#define USB_OTG_GINTSTS_OTGINT                  ((uint32_t)0x00000004)            /*!< OTG interrupt                       */
+#define USB_OTG_GINTSTS_SOF                     ((uint32_t)0x00000008)            /*!< Start of frame                      */
+#define USB_OTG_GINTSTS_RXFLVL                  ((uint32_t)0x00000010)            /*!< RxFIFO nonempty                     */
+#define USB_OTG_GINTSTS_NPTXFE                  ((uint32_t)0x00000020)            /*!< Nonperiodic TxFIFO empty            */
+#define USB_OTG_GINTSTS_GINAKEFF                ((uint32_t)0x00000040)            /*!< Global IN nonperiodic NAK effective */
+#define USB_OTG_GINTSTS_BOUTNAKEFF              ((uint32_t)0x00000080)            /*!< Global OUT NAK effective            */
+#define USB_OTG_GINTSTS_ESUSP                   ((uint32_t)0x00000400)            /*!< Early suspend                            */
+#define USB_OTG_GINTSTS_USBSUSP                 ((uint32_t)0x00000800)            /*!< USB suspend                              */
+#define USB_OTG_GINTSTS_USBRST                  ((uint32_t)0x00001000)            /*!< USB reset                                */
+#define USB_OTG_GINTSTS_ENUMDNE                 ((uint32_t)0x00002000)            /*!< Enumeration done                         */
+#define USB_OTG_GINTSTS_ISOODRP                 ((uint32_t)0x00004000)            /*!< Isochronous OUT packet dropped interrupt */
+#define USB_OTG_GINTSTS_EOPF                    ((uint32_t)0x00008000)            /*!< End of periodic frame interrupt          */
+#define USB_OTG_GINTSTS_IEPINT                  ((uint32_t)0x00040000)            /*!< IN endpoint interrupt                          */
+#define USB_OTG_GINTSTS_OEPINT                  ((uint32_t)0x00080000)            /*!< OUT endpoint interrupt                         */
+#define USB_OTG_GINTSTS_IISOIXFR                ((uint32_t)0x00100000)            /*!< Incomplete isochronous IN transfer             */
+#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT       ((uint32_t)0x00200000)            /*!< Incomplete periodic transfer                   */
+#define USB_OTG_GINTSTS_DATAFSUSP               ((uint32_t)0x00400000)            /*!< Data fetch suspended                           */
+#define USB_OTG_GINTSTS_HPRTINT                 ((uint32_t)0x01000000)            /*!< Host port interrupt                            */
+#define USB_OTG_GINTSTS_HCINT                   ((uint32_t)0x02000000)            /*!< Host channels interrupt                        */
+#define USB_OTG_GINTSTS_PTXFE                   ((uint32_t)0x04000000)            /*!< Periodic TxFIFO empty                          */
+#define USB_OTG_GINTSTS_CIDSCHG                 ((uint32_t)0x10000000)            /*!< Connector ID status change                     */
+#define USB_OTG_GINTSTS_DISCINT                 ((uint32_t)0x20000000)            /*!< Disconnect detected interrupt                  */
+#define USB_OTG_GINTSTS_SRQINT                  ((uint32_t)0x40000000)            /*!< Session request/new session detected interrupt */
+#define USB_OTG_GINTSTS_WKUINT                  ((uint32_t)0x80000000)            /*!< Resume/remote wakeup detected interrupt        */
+
+/********************  Bit definition forUSB_OTG_GINTMSK register  ********************/
+#define USB_OTG_GINTMSK_MMISM                   ((uint32_t)0x00000002)            /*!< Mode mismatch interrupt mask                        */
+#define USB_OTG_GINTMSK_OTGINT                  ((uint32_t)0x00000004)            /*!< OTG interrupt mask                                  */
+#define USB_OTG_GINTMSK_SOFM                    ((uint32_t)0x00000008)            /*!< Start of frame mask                                 */
+#define USB_OTG_GINTMSK_RXFLVLM                 ((uint32_t)0x00000010)            /*!< Receive FIFO nonempty mask                          */
+#define USB_OTG_GINTMSK_NPTXFEM                 ((uint32_t)0x00000020)            /*!< Nonperiodic TxFIFO empty mask                       */
+#define USB_OTG_GINTMSK_GINAKEFFM               ((uint32_t)0x00000040)            /*!< Global nonperiodic IN NAK effective mask            */
+#define USB_OTG_GINTMSK_GONAKEFFM               ((uint32_t)0x00000080)            /*!< Global OUT NAK effective mask                       */
+#define USB_OTG_GINTMSK_ESUSPM                  ((uint32_t)0x00000400)            /*!< Early suspend mask                                  */
+#define USB_OTG_GINTMSK_USBSUSPM                ((uint32_t)0x00000800)            /*!< USB suspend mask                                    */
+#define USB_OTG_GINTMSK_USBRST                  ((uint32_t)0x00001000)            /*!< USB reset mask                                      */
+#define USB_OTG_GINTMSK_ENUMDNEM                ((uint32_t)0x00002000)            /*!< Enumeration done mask                               */
+#define USB_OTG_GINTMSK_ISOODRPM                ((uint32_t)0x00004000)            /*!< Isochronous OUT packet dropped interrupt mask       */
+#define USB_OTG_GINTMSK_EOPFM                   ((uint32_t)0x00008000)            /*!< End of periodic frame interrupt mask                */
+#define USB_OTG_GINTMSK_EPMISM                  ((uint32_t)0x00020000)            /*!< Endpoint mismatch interrupt mask                    */
+#define USB_OTG_GINTMSK_IEPINT                  ((uint32_t)0x00040000)            /*!< IN endpoints interrupt mask                         */
+#define USB_OTG_GINTMSK_OEPINT                  ((uint32_t)0x00080000)            /*!< OUT endpoints interrupt mask                        */
+#define USB_OTG_GINTMSK_IISOIXFRM               ((uint32_t)0x00100000)            /*!< Incomplete isochronous IN transfer mask             */
+#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM         ((uint32_t)0x00200000)            /*!< Incomplete periodic transfer mask                   */
+#define USB_OTG_GINTMSK_FSUSPM                  ((uint32_t)0x00400000)            /*!< Data fetch suspended mask                           */
+#define USB_OTG_GINTMSK_PRTIM                   ((uint32_t)0x01000000)            /*!< Host port interrupt mask                            */
+#define USB_OTG_GINTMSK_HCIM                    ((uint32_t)0x02000000)            /*!< Host channels interrupt mask                        */
+#define USB_OTG_GINTMSK_PTXFEM                  ((uint32_t)0x04000000)            /*!< Periodic TxFIFO empty mask                          */
+#define USB_OTG_GINTMSK_CIDSCHGM                ((uint32_t)0x10000000)            /*!< Connector ID status change mask                     */
+#define USB_OTG_GINTMSK_DISCINT                 ((uint32_t)0x20000000)            /*!< Disconnect detected interrupt mask                  */
+#define USB_OTG_GINTMSK_SRQIM                   ((uint32_t)0x40000000)            /*!< Session request/new session detected interrupt mask */
+#define USB_OTG_GINTMSK_WUIM                    ((uint32_t)0x80000000)            /*!< Resume/remote wakeup detected interrupt mask        */
+
+/********************  Bit definition forUSB_OTG_DAINT register  ********************/
+#define USB_OTG_DAINT_IEPINT                  ((uint32_t)0x0000FFFF)            /*!< IN endpoint interrupt bits  */
+#define USB_OTG_DAINT_OEPINT                  ((uint32_t)0xFFFF0000)            /*!< OUT endpoint interrupt bits */
+
+/********************  Bit definition forUSB_OTG_HAINTMSK register  ********************/
+#define USB_OTG_HAINTMSK_HAINTM                  ((uint32_t)0x0000FFFF)            /*!< Channel interrupt mask */
+
+/********************  Bit definition for USB_OTG_GRXSTSP register  ********************/
+#define USB_OTG_GRXSTSP_EPNUM                    ((uint32_t)0x0000000F)            /*!< IN EP interrupt mask bits  */
+#define USB_OTG_GRXSTSP_BCNT                     ((uint32_t)0x00007FF0)            /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_DPID                     ((uint32_t)0x00018000)            /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_PKTSTS                   ((uint32_t)0x001E0000)            /*!< OUT EP interrupt mask bits */
+
+/********************  Bit definition forUSB_OTG_DAINTMSK register  ********************/
+#define USB_OTG_DAINTMSK_IEPM                    ((uint32_t)0x0000FFFF)            /*!< IN EP interrupt mask bits */
+#define USB_OTG_DAINTMSK_OEPM                    ((uint32_t)0xFFFF0000)            /*!< OUT EP interrupt mask bits */
+
+/********************  Bit definition for OTG register  ********************/
+
+#define USB_OTG_CHNUM                   ((uint32_t)0x0000000F)            /*!< Channel number */
+#define USB_OTG_CHNUM_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_CHNUM_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_CHNUM_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_CHNUM_3                 ((uint32_t)0x00000008)            /*!<Bit 3 */
+#define USB_OTG_BCNT                    ((uint32_t)0x00007FF0)            /*!< Byte count */
+
+#define USB_OTG_DPID                    ((uint32_t)0x00018000)            /*!< Data PID */
+#define USB_OTG_DPID_0                  ((uint32_t)0x00008000)            /*!<Bit 0 */
+#define USB_OTG_DPID_1                  ((uint32_t)0x00010000)            /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS                  ((uint32_t)0x001E0000)            /*!< Packet status */
+#define USB_OTG_PKTSTS_0                ((uint32_t)0x00020000)            /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1                ((uint32_t)0x00040000)            /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2                ((uint32_t)0x00080000)            /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3                ((uint32_t)0x00100000)            /*!<Bit 3 */
+
+#define USB_OTG_EPNUM                   ((uint32_t)0x0000000F)            /*!< Endpoint number */
+#define USB_OTG_EPNUM_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_EPNUM_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_EPNUM_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_EPNUM_3                 ((uint32_t)0x00000008)            /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM                  ((uint32_t)0x01E00000)            /*!< Frame number */
+#define USB_OTG_FRMNUM_0                ((uint32_t)0x00200000)            /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1                ((uint32_t)0x00400000)            /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2                ((uint32_t)0x00800000)            /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3                ((uint32_t)0x01000000)            /*!<Bit 3 */
+
+/********************  Bit definition for OTG register  ********************/
+
+#define USB_OTG_CHNUM                   ((uint32_t)0x0000000F)            /*!< Channel number */
+#define USB_OTG_CHNUM_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_CHNUM_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_CHNUM_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_CHNUM_3                 ((uint32_t)0x00000008)            /*!<Bit 3 */
+#define USB_OTG_BCNT                    ((uint32_t)0x00007FF0)            /*!< Byte count */
+
+#define USB_OTG_DPID                    ((uint32_t)0x00018000)            /*!< Data PID */
+#define USB_OTG_DPID_0                  ((uint32_t)0x00008000)            /*!<Bit 0 */
+#define USB_OTG_DPID_1                  ((uint32_t)0x00010000)            /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS                  ((uint32_t)0x001E0000)            /*!< Packet status */
+#define USB_OTG_PKTSTS_0                ((uint32_t)0x00020000)            /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1                ((uint32_t)0x00040000)            /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2                ((uint32_t)0x00080000)            /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3                ((uint32_t)0x00100000)            /*!<Bit 3 */
+
+#define USB_OTG_EPNUM                   ((uint32_t)0x0000000F)            /*!< Endpoint number */
+#define USB_OTG_EPNUM_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_EPNUM_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_EPNUM_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_EPNUM_3                 ((uint32_t)0x00000008)            /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM                  ((uint32_t)0x01E00000)            /*!< Frame number */
+#define USB_OTG_FRMNUM_0                ((uint32_t)0x00200000)            /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1                ((uint32_t)0x00400000)            /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2                ((uint32_t)0x00800000)            /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3                ((uint32_t)0x01000000)            /*!<Bit 3 */
+
+/********************  Bit definition forUSB_OTG_GRXFSIZ register  ********************/
+#define USB_OTG_GRXFSIZ_RXFD            ((uint32_t)0x0000FFFF)            /*!< RxFIFO depth */
+
+/********************  Bit definition forUSB_OTG_DVBUSDIS register  ********************/
+#define USB_OTG_DVBUSDIS_VBUSDT         ((uint32_t)0x0000FFFF)            /*!< Device VBUS discharge time */
+
+/********************  Bit definition for OTG register  ********************/
+#define USB_OTG_NPTXFSA                 ((uint32_t)0x0000FFFF)            /*!< Nonperiodic transmit RAM start address */
+#define USB_OTG_NPTXFD                  ((uint32_t)0xFFFF0000)            /*!< Nonperiodic TxFIFO depth               */
+#define USB_OTG_TX0FSA                  ((uint32_t)0x0000FFFF)            /*!< Endpoint 0 transmit RAM start address  */
+#define USB_OTG_TX0FD                   ((uint32_t)0xFFFF0000)            /*!< Endpoint 0 TxFIFO depth                */
+
+/********************  Bit definition forUSB_OTG_DVBUSPULSE register  ********************/
+#define USB_OTG_DVBUSPULSE_DVBUSP                  ((uint32_t)0x00000FFF)            /*!< Device VBUS pulsing time */
+
+/********************  Bit definition forUSB_OTG_GNPTXSTS register  ********************/
+#define USB_OTG_GNPTXSTS_NPTXFSAV                ((uint32_t)0x0000FFFF)            /*!< Nonperiodic TxFIFO space available */
+
+#define USB_OTG_GNPTXSTS_NPTQXSAV                ((uint32_t)0x00FF0000)            /*!< Nonperiodic transmit request queue space available */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_0              ((uint32_t)0x00010000)            /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_1              ((uint32_t)0x00020000)            /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_2              ((uint32_t)0x00040000)            /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_3              ((uint32_t)0x00080000)            /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_4              ((uint32_t)0x00100000)            /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_5              ((uint32_t)0x00200000)            /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_6              ((uint32_t)0x00400000)            /*!<Bit 6 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_7              ((uint32_t)0x00800000)            /*!<Bit 7 */
+
+#define USB_OTG_GNPTXSTS_NPTXQTOP                ((uint32_t)0x7F000000)            /*!< Top of the nonperiodic transmit request queue */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_0              ((uint32_t)0x01000000)            /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_1              ((uint32_t)0x02000000)            /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_2              ((uint32_t)0x04000000)            /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_3              ((uint32_t)0x08000000)            /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_4              ((uint32_t)0x10000000)            /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_5              ((uint32_t)0x20000000)            /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_6              ((uint32_t)0x40000000)            /*!<Bit 6 */
+
+/********************  Bit definition forUSB_OTG_DTHRCTL register  ********************/
+#define USB_OTG_DTHRCTL_NONISOTHREN             ((uint32_t)0x00000001)            /*!< Nonisochronous IN endpoints threshold enable */
+#define USB_OTG_DTHRCTL_ISOTHREN                ((uint32_t)0x00000002)            /*!< ISO IN endpoint threshold enable */
+
+#define USB_OTG_DTHRCTL_TXTHRLEN                ((uint32_t)0x000007FC)            /*!< Transmit threshold length */
+#define USB_OTG_DTHRCTL_TXTHRLEN_0              ((uint32_t)0x00000004)            /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_1              ((uint32_t)0x00000008)            /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_2              ((uint32_t)0x00000010)            /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_3              ((uint32_t)0x00000020)            /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_4              ((uint32_t)0x00000040)            /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_5              ((uint32_t)0x00000080)            /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_6              ((uint32_t)0x00000100)            /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_7              ((uint32_t)0x00000200)            /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_8              ((uint32_t)0x00000400)            /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_RXTHREN                 ((uint32_t)0x00010000)            /*!< Receive threshold enable */
+
+#define USB_OTG_DTHRCTL_RXTHRLEN                ((uint32_t)0x03FE0000)            /*!< Receive threshold length */
+#define USB_OTG_DTHRCTL_RXTHRLEN_0              ((uint32_t)0x00020000)            /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_1              ((uint32_t)0x00040000)            /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_2              ((uint32_t)0x00080000)            /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_3              ((uint32_t)0x00100000)            /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_4              ((uint32_t)0x00200000)            /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_5              ((uint32_t)0x00400000)            /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_6              ((uint32_t)0x00800000)            /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_7              ((uint32_t)0x01000000)            /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_8              ((uint32_t)0x02000000)            /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_ARPEN                   ((uint32_t)0x08000000)            /*!< Arbiter parking enable */
+
+/********************  Bit definition forUSB_OTG_DIEPEMPMSK register  ********************/
+#define USB_OTG_DIEPEMPMSK_INEPTXFEM               ((uint32_t)0x0000FFFF)            /*!< IN EP Tx FIFO empty interrupt mask bits */
+
+/********************  Bit definition forUSB_OTG_DEACHINT register  ********************/
+#define USB_OTG_DEACHINT_IEP1INT                 ((uint32_t)0x00000002)            /*!< IN endpoint 1interrupt bit   */
+#define USB_OTG_DEACHINT_OEP1INT                 ((uint32_t)0x00020000)            /*!< OUT endpoint 1 interrupt bit */
+
+/********************  Bit definition forUSB_OTG_GCCFG register  ********************/
+#define USB_OTG_GCCFG_PWRDWN                  ((uint32_t)0x00010000)            /*!< Power down */
+#define USB_OTG_GCCFG_I2CPADEN                ((uint32_t)0x00020000)            /*!< Enable I2C bus connection for the external I2C PHY interface */
+#define USB_OTG_GCCFG_VBUSASEN                ((uint32_t)0x00040000)            /*!< Enable the VBUS sensing device                               */
+#define USB_OTG_GCCFG_VBUSBSEN                ((uint32_t)0x00080000)            /*!< Enable the VBUS sensing device                               */
+#define USB_OTG_GCCFG_SOFOUTEN                ((uint32_t)0x00100000)            /*!< SOF output enable                                            */
+#define USB_OTG_GCCFG_NOVBUSSENS              ((uint32_t)0x00200000)            /*!< VBUS sensing disable option                                  */
+
+/********************  Bit definition forUSB_OTG_DEACHINTMSK register  ********************/
+#define USB_OTG_DEACHINTMSK_IEP1INTM                ((uint32_t)0x00000002)            /*!< IN Endpoint 1 interrupt mask bit  */
+#define USB_OTG_DEACHINTMSK_OEP1INTM                ((uint32_t)0x00020000)            /*!< OUT Endpoint 1 interrupt mask bit */
+
+/********************  Bit definition forUSB_OTG_CID register  ********************/
+#define USB_OTG_CID_PRODUCT_ID              ((uint32_t)0xFFFFFFFF)            /*!< Product ID field */
+
+/********************  Bit definition forUSB_OTG_DIEPEACHMSK1 register  ********************/
+#define USB_OTG_DIEPEACHMSK1_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed interrupt mask                 */
+#define USB_OTG_DIEPEACHMSK1_EPDM                    ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt mask                  */
+#define USB_OTG_DIEPEACHMSK1_TOM                     ((uint32_t)0x00000008)            /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK               ((uint32_t)0x00000010)            /*!< IN token received when TxFIFO empty mask          */
+#define USB_OTG_DIEPEACHMSK1_INEPNMM                 ((uint32_t)0x00000020)            /*!< IN token received with EP mismatch mask           */
+#define USB_OTG_DIEPEACHMSK1_INEPNEM                 ((uint32_t)0x00000040)            /*!< IN endpoint NAK effective mask                    */
+#define USB_OTG_DIEPEACHMSK1_TXFURM                  ((uint32_t)0x00000100)            /*!< FIFO underrun mask */
+#define USB_OTG_DIEPEACHMSK1_BIM                     ((uint32_t)0x00000200)            /*!< BNA interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_NAKM                    ((uint32_t)0x00002000)            /*!< NAK interrupt mask */
+
+/********************  Bit definition forUSB_OTG_HPRT register  ********************/
+#define USB_OTG_HPRT_PCSTS                   ((uint32_t)0x00000001)            /*!< Port connect status        */
+#define USB_OTG_HPRT_PCDET                   ((uint32_t)0x00000002)            /*!< Port connect detected      */
+#define USB_OTG_HPRT_PENA                    ((uint32_t)0x00000004)            /*!< Port enable                */
+#define USB_OTG_HPRT_PENCHNG                 ((uint32_t)0x00000008)            /*!< Port enable/disable change */
+#define USB_OTG_HPRT_POCA                    ((uint32_t)0x00000010)            /*!< Port overcurrent active    */
+#define USB_OTG_HPRT_POCCHNG                 ((uint32_t)0x00000020)            /*!< Port overcurrent change    */
+#define USB_OTG_HPRT_PRES                    ((uint32_t)0x00000040)            /*!< Port resume   */
+#define USB_OTG_HPRT_PSUSP                   ((uint32_t)0x00000080)            /*!< Port suspend  */
+#define USB_OTG_HPRT_PRST                    ((uint32_t)0x00000100)            /*!< Port reset    */
+
+#define USB_OTG_HPRT_PLSTS                   ((uint32_t)0x00000C00)            /*!< Port line status */
+#define USB_OTG_HPRT_PLSTS_0                 ((uint32_t)0x00000400)            /*!<Bit 0 */
+#define USB_OTG_HPRT_PLSTS_1                 ((uint32_t)0x00000800)            /*!<Bit 1 */
+#define USB_OTG_HPRT_PPWR                    ((uint32_t)0x00001000)            /*!< Port power */
+
+#define USB_OTG_HPRT_PTCTL                   ((uint32_t)0x0001E000)            /*!< Port test control */
+#define USB_OTG_HPRT_PTCTL_0                 ((uint32_t)0x00002000)            /*!<Bit 0 */
+#define USB_OTG_HPRT_PTCTL_1                 ((uint32_t)0x00004000)            /*!<Bit 1 */
+#define USB_OTG_HPRT_PTCTL_2                 ((uint32_t)0x00008000)            /*!<Bit 2 */
+#define USB_OTG_HPRT_PTCTL_3                 ((uint32_t)0x00010000)            /*!<Bit 3 */
+
+#define USB_OTG_HPRT_PSPD                    ((uint32_t)0x00060000)            /*!< Port speed */
+#define USB_OTG_HPRT_PSPD_0                  ((uint32_t)0x00020000)            /*!<Bit 0 */
+#define USB_OTG_HPRT_PSPD_1                  ((uint32_t)0x00040000)            /*!<Bit 1 */
+
+/********************  Bit definition forUSB_OTG_DOEPEACHMSK1 register  ********************/
+#define USB_OTG_DOEPEACHMSK1_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_EPDM                    ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_TOM                     ((uint32_t)0x00000008)            /*!< Timeout condition mask */
+#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK               ((uint32_t)0x00000010)            /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNMM                 ((uint32_t)0x00000020)            /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNEM                 ((uint32_t)0x00000040)            /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DOEPEACHMSK1_TXFURM                  ((uint32_t)0x00000100)            /*!< OUT packet error mask */
+#define USB_OTG_DOEPEACHMSK1_BIM                     ((uint32_t)0x00000200)            /*!< BNA interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_BERRM                   ((uint32_t)0x00001000)            /*!< Bubble error interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NAKM                    ((uint32_t)0x00002000)            /*!< NAK interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NYETM                   ((uint32_t)0x00004000)            /*!< NYET interrupt mask */
+
+/********************  Bit definition forUSB_OTG_HPTXFSIZ register  ********************/
+#define USB_OTG_HPTXFSIZ_PTXSA                   ((uint32_t)0x0000FFFF)            /*!< Host periodic TxFIFO start address */
+#define USB_OTG_HPTXFSIZ_PTXFD                   ((uint32_t)0xFFFF0000)            /*!< Host periodic TxFIFO depth */
+
+/********************  Bit definition forUSB_OTG_DIEPCTL register  ********************/
+#define USB_OTG_DIEPCTL_MPSIZ                   ((uint32_t)0x000007FF)            /*!< Maximum packet size */
+#define USB_OTG_DIEPCTL_USBAEP                  ((uint32_t)0x00008000)            /*!< USB active endpoint */
+#define USB_OTG_DIEPCTL_EONUM_DPID              ((uint32_t)0x00010000)            /*!< Even/odd frame */
+#define USB_OTG_DIEPCTL_NAKSTS                  ((uint32_t)0x00020000)            /*!< NAK status */
+
+#define USB_OTG_DIEPCTL_EPTYP                   ((uint32_t)0x000C0000)            /*!< Endpoint type */
+#define USB_OTG_DIEPCTL_EPTYP_0                 ((uint32_t)0x00040000)            /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_EPTYP_1                 ((uint32_t)0x00080000)            /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_STALL                   ((uint32_t)0x00200000)            /*!< STALL handshake */
+
+#define USB_OTG_DIEPCTL_TXFNUM                  ((uint32_t)0x03C00000)            /*!< TxFIFO number */
+#define USB_OTG_DIEPCTL_TXFNUM_0                ((uint32_t)0x00400000)            /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_TXFNUM_1                ((uint32_t)0x00800000)            /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_TXFNUM_2                ((uint32_t)0x01000000)            /*!<Bit 2 */
+#define USB_OTG_DIEPCTL_TXFNUM_3                ((uint32_t)0x02000000)            /*!<Bit 3 */
+#define USB_OTG_DIEPCTL_CNAK                    ((uint32_t)0x04000000)            /*!< Clear NAK */
+#define USB_OTG_DIEPCTL_SNAK                    ((uint32_t)0x08000000)            /*!< Set NAK */
+#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM          ((uint32_t)0x10000000)            /*!< Set DATA0 PID */
+#define USB_OTG_DIEPCTL_SODDFRM                 ((uint32_t)0x20000000)            /*!< Set odd frame */
+#define USB_OTG_DIEPCTL_EPDIS                   ((uint32_t)0x40000000)            /*!< Endpoint disable */
+#define USB_OTG_DIEPCTL_EPENA                   ((uint32_t)0x80000000)            /*!< Endpoint enable */
+
+/********************  Bit definition forUSB_OTG_HCCHAR register  ********************/
+#define USB_OTG_HCCHAR_MPSIZ                   ((uint32_t)0x000007FF)            /*!< Maximum packet size */
+
+#define USB_OTG_HCCHAR_EPNUM                   ((uint32_t)0x00007800)            /*!< Endpoint number */
+#define USB_OTG_HCCHAR_EPNUM_0                 ((uint32_t)0x00000800)            /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPNUM_1                 ((uint32_t)0x00001000)            /*!<Bit 1 */
+#define USB_OTG_HCCHAR_EPNUM_2                 ((uint32_t)0x00002000)            /*!<Bit 2 */
+#define USB_OTG_HCCHAR_EPNUM_3                 ((uint32_t)0x00004000)            /*!<Bit 3 */
+#define USB_OTG_HCCHAR_EPDIR                   ((uint32_t)0x00008000)            /*!< Endpoint direction */
+#define USB_OTG_HCCHAR_LSDEV                   ((uint32_t)0x00020000)            /*!< Low-speed device */
+
+#define USB_OTG_HCCHAR_EPTYP                   ((uint32_t)0x000C0000)            /*!< Endpoint type */
+#define USB_OTG_HCCHAR_EPTYP_0                 ((uint32_t)0x00040000)            /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPTYP_1                 ((uint32_t)0x00080000)            /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_MC                      ((uint32_t)0x00300000)            /*!< Multi Count (MC) / Error Count (EC) */
+#define USB_OTG_HCCHAR_MC_0                    ((uint32_t)0x00100000)            /*!<Bit 0 */
+#define USB_OTG_HCCHAR_MC_1                    ((uint32_t)0x00200000)            /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_DAD                     ((uint32_t)0x1FC00000)            /*!< Device address */
+#define USB_OTG_HCCHAR_DAD_0                   ((uint32_t)0x00400000)            /*!<Bit 0 */
+#define USB_OTG_HCCHAR_DAD_1                   ((uint32_t)0x00800000)            /*!<Bit 1 */
+#define USB_OTG_HCCHAR_DAD_2                   ((uint32_t)0x01000000)            /*!<Bit 2 */
+#define USB_OTG_HCCHAR_DAD_3                   ((uint32_t)0x02000000)            /*!<Bit 3 */
+#define USB_OTG_HCCHAR_DAD_4                   ((uint32_t)0x04000000)            /*!<Bit 4 */
+#define USB_OTG_HCCHAR_DAD_5                   ((uint32_t)0x08000000)            /*!<Bit 5 */
+#define USB_OTG_HCCHAR_DAD_6                   ((uint32_t)0x10000000)            /*!<Bit 6 */
+#define USB_OTG_HCCHAR_ODDFRM                  ((uint32_t)0x20000000)            /*!< Odd frame */
+#define USB_OTG_HCCHAR_CHDIS                   ((uint32_t)0x40000000)            /*!< Channel disable */
+#define USB_OTG_HCCHAR_CHENA                   ((uint32_t)0x80000000)            /*!< Channel enable */
+
+/********************  Bit definition forUSB_OTG_HCSPLT register  ********************/
+
+#define USB_OTG_HCSPLT_PRTADDR                 ((uint32_t)0x0000007F)            /*!< Port address */
+#define USB_OTG_HCSPLT_PRTADDR_0               ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_HCSPLT_PRTADDR_1               ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_HCSPLT_PRTADDR_2               ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_HCSPLT_PRTADDR_3               ((uint32_t)0x00000008)            /*!<Bit 3 */
+#define USB_OTG_HCSPLT_PRTADDR_4               ((uint32_t)0x00000010)            /*!<Bit 4 */
+#define USB_OTG_HCSPLT_PRTADDR_5               ((uint32_t)0x00000020)            /*!<Bit 5 */
+#define USB_OTG_HCSPLT_PRTADDR_6               ((uint32_t)0x00000040)            /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_HUBADDR                 ((uint32_t)0x00003F80)            /*!< Hub address */
+#define USB_OTG_HCSPLT_HUBADDR_0               ((uint32_t)0x00000080)            /*!<Bit 0 */
+#define USB_OTG_HCSPLT_HUBADDR_1               ((uint32_t)0x00000100)            /*!<Bit 1 */
+#define USB_OTG_HCSPLT_HUBADDR_2               ((uint32_t)0x00000200)            /*!<Bit 2 */
+#define USB_OTG_HCSPLT_HUBADDR_3               ((uint32_t)0x00000400)            /*!<Bit 3 */
+#define USB_OTG_HCSPLT_HUBADDR_4               ((uint32_t)0x00000800)            /*!<Bit 4 */
+#define USB_OTG_HCSPLT_HUBADDR_5               ((uint32_t)0x00001000)            /*!<Bit 5 */
+#define USB_OTG_HCSPLT_HUBADDR_6               ((uint32_t)0x00002000)            /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_XACTPOS                 ((uint32_t)0x0000C000)            /*!< XACTPOS */
+#define USB_OTG_HCSPLT_XACTPOS_0               ((uint32_t)0x00004000)            /*!<Bit 0 */
+#define USB_OTG_HCSPLT_XACTPOS_1               ((uint32_t)0x00008000)            /*!<Bit 1 */
+#define USB_OTG_HCSPLT_COMPLSPLT               ((uint32_t)0x00010000)            /*!< Do complete split */
+#define USB_OTG_HCSPLT_SPLITEN                 ((uint32_t)0x80000000)            /*!< Split enable */
+
+/********************  Bit definition forUSB_OTG_HCINT register  ********************/
+#define USB_OTG_HCINT_XFRC                    ((uint32_t)0x00000001)            /*!< Transfer completed */
+#define USB_OTG_HCINT_CHH                     ((uint32_t)0x00000002)            /*!< Channel halted */
+#define USB_OTG_HCINT_AHBERR                  ((uint32_t)0x00000004)            /*!< AHB error */
+#define USB_OTG_HCINT_STALL                   ((uint32_t)0x00000008)            /*!< STALL response received interrupt */
+#define USB_OTG_HCINT_NAK                     ((uint32_t)0x00000010)            /*!< NAK response received interrupt */
+#define USB_OTG_HCINT_ACK                     ((uint32_t)0x00000020)            /*!< ACK response received/transmitted interrupt */
+#define USB_OTG_HCINT_NYET                    ((uint32_t)0x00000040)            /*!< Response received interrupt */
+#define USB_OTG_HCINT_TXERR                   ((uint32_t)0x00000080)            /*!< Transaction error */
+#define USB_OTG_HCINT_BBERR                   ((uint32_t)0x00000100)            /*!< Babble error */
+#define USB_OTG_HCINT_FRMOR                   ((uint32_t)0x00000200)            /*!< Frame overrun */
+#define USB_OTG_HCINT_DTERR                   ((uint32_t)0x00000400)            /*!< Data toggle error */
+
+/********************  Bit definition forUSB_OTG_DIEPINT register  ********************/
+#define USB_OTG_DIEPINT_XFRC                    ((uint32_t)0x00000001)            /*!< Transfer completed interrupt */
+#define USB_OTG_DIEPINT_EPDISD                  ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt */
+#define USB_OTG_DIEPINT_TOC                     ((uint32_t)0x00000008)            /*!< Timeout condition */
+#define USB_OTG_DIEPINT_ITTXFE                  ((uint32_t)0x00000010)            /*!< IN token received when TxFIFO is empty */
+#define USB_OTG_DIEPINT_INEPNE                  ((uint32_t)0x00000040)            /*!< IN endpoint NAK effective */
+#define USB_OTG_DIEPINT_TXFE                    ((uint32_t)0x00000080)            /*!< Transmit FIFO empty */
+#define USB_OTG_DIEPINT_TXFIFOUDRN              ((uint32_t)0x00000100)            /*!< Transmit Fifo Underrun */
+#define USB_OTG_DIEPINT_BNA                     ((uint32_t)0x00000200)            /*!< Buffer not available interrupt */
+#define USB_OTG_DIEPINT_PKTDRPSTS               ((uint32_t)0x00000800)            /*!< Packet dropped status */
+#define USB_OTG_DIEPINT_BERR                    ((uint32_t)0x00001000)            /*!< Babble error interrupt */
+#define USB_OTG_DIEPINT_NAK                     ((uint32_t)0x00002000)            /*!< NAK interrupt */
+
+/********************  Bit definition forUSB_OTG_HCINTMSK register  ********************/
+#define USB_OTG_HCINTMSK_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed mask */
+#define USB_OTG_HCINTMSK_CHHM                    ((uint32_t)0x00000002)            /*!< Channel halted mask */
+#define USB_OTG_HCINTMSK_AHBERR                  ((uint32_t)0x00000004)            /*!< AHB error */
+#define USB_OTG_HCINTMSK_STALLM                  ((uint32_t)0x00000008)            /*!< STALL response received interrupt mask */
+#define USB_OTG_HCINTMSK_NAKM                    ((uint32_t)0x00000010)            /*!< NAK response received interrupt mask */
+#define USB_OTG_HCINTMSK_ACKM                    ((uint32_t)0x00000020)            /*!< ACK response received/transmitted interrupt mask */
+#define USB_OTG_HCINTMSK_NYET                    ((uint32_t)0x00000040)            /*!< response received interrupt mask */
+#define USB_OTG_HCINTMSK_TXERRM                  ((uint32_t)0x00000080)            /*!< Transaction error mask */
+#define USB_OTG_HCINTMSK_BBERRM                  ((uint32_t)0x00000100)            /*!< Babble error mask */
+#define USB_OTG_HCINTMSK_FRMORM                  ((uint32_t)0x00000200)            /*!< Frame overrun mask */
+#define USB_OTG_HCINTMSK_DTERRM                  ((uint32_t)0x00000400)            /*!< Data toggle error mask */
+
+/********************  Bit definition for USB_OTG_DIEPTSIZ register  ********************/
+
+#define USB_OTG_DIEPTSIZ_XFRSIZ                  ((uint32_t)0x0007FFFF)            /*!< Transfer size */
+#define USB_OTG_DIEPTSIZ_PKTCNT                  ((uint32_t)0x1FF80000)            /*!< Packet count */
+#define USB_OTG_DIEPTSIZ_MULCNT                  ((uint32_t)0x60000000)            /*!< Packet count */
+/********************  Bit definition forUSB_OTG_HCTSIZ register  ********************/
+#define USB_OTG_HCTSIZ_XFRSIZ                    ((uint32_t)0x0007FFFF)            /*!< Transfer size */
+#define USB_OTG_HCTSIZ_PKTCNT                    ((uint32_t)0x1FF80000)            /*!< Packet count */
+#define USB_OTG_HCTSIZ_DOPING                    ((uint32_t)0x80000000)            /*!< Do PING */
+#define USB_OTG_HCTSIZ_DPID                      ((uint32_t)0x60000000)            /*!< Data PID */
+#define USB_OTG_HCTSIZ_DPID_0                    ((uint32_t)0x20000000)            /*!<Bit 0 */
+#define USB_OTG_HCTSIZ_DPID_1                    ((uint32_t)0x40000000)            /*!<Bit 1 */
+
+/********************  Bit definition forUSB_OTG_DIEPDMA register  ********************/
+#define USB_OTG_DIEPDMA_DMAADDR                  ((uint32_t)0xFFFFFFFF)            /*!< DMA address */
+
+/********************  Bit definition forUSB_OTG_HCDMA register  ********************/
+#define USB_OTG_HCDMA_DMAADDR                    ((uint32_t)0xFFFFFFFF)            /*!< DMA address */
+
+/********************  Bit definition forUSB_OTG_DTXFSTS register  ********************/
+#define USB_OTG_DTXFSTS_INEPTFSAV                ((uint32_t)0x0000FFFF)            /*!< IN endpoint TxFIFO space available */
+
+/********************  Bit definition forUSB_OTG_DIEPTXF register  ********************/
+#define USB_OTG_DIEPTXF_INEPTXSA                 ((uint32_t)0x0000FFFF)            /*!< IN endpoint FIFOx transmit RAM start address */
+#define USB_OTG_DIEPTXF_INEPTXFD                 ((uint32_t)0xFFFF0000)            /*!< IN endpoint TxFIFO depth */
+
+/********************  Bit definition forUSB_OTG_DOEPCTL register  ********************/
+
+#define USB_OTG_DOEPCTL_MPSIZ                     ((uint32_t)0x000007FF)            /*!< Maximum packet size */          /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_USBAEP                    ((uint32_t)0x00008000)            /*!< USB active endpoint */
+#define USB_OTG_DOEPCTL_NAKSTS                    ((uint32_t)0x00020000)            /*!< NAK status */
+#define USB_OTG_DOEPCTL_SD0PID_SEVNFRM            ((uint32_t)0x10000000)            /*!< Set DATA0 PID */
+#define USB_OTG_DOEPCTL_SODDFRM                   ((uint32_t)0x20000000)            /*!< Set odd frame */
+#define USB_OTG_DOEPCTL_EPTYP                     ((uint32_t)0x000C0000)            /*!< Endpoint type */
+#define USB_OTG_DOEPCTL_EPTYP_0                   ((uint32_t)0x00040000)            /*!<Bit 0 */
+#define USB_OTG_DOEPCTL_EPTYP_1                   ((uint32_t)0x00080000)            /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_SNPM                      ((uint32_t)0x00100000)            /*!< Snoop mode */
+#define USB_OTG_DOEPCTL_STALL                     ((uint32_t)0x00200000)            /*!< STALL handshake */
+#define USB_OTG_DOEPCTL_CNAK                      ((uint32_t)0x04000000)            /*!< Clear NAK */
+#define USB_OTG_DOEPCTL_SNAK                      ((uint32_t)0x08000000)            /*!< Set NAK */
+#define USB_OTG_DOEPCTL_EPDIS                     ((uint32_t)0x40000000)            /*!< Endpoint disable */
+#define USB_OTG_DOEPCTL_EPENA                     ((uint32_t)0x80000000)            /*!< Endpoint enable */
+
+/********************  Bit definition forUSB_OTG_DOEPINT register  ********************/
+#define USB_OTG_DOEPINT_XFRC                    ((uint32_t)0x00000001)            /*!< Transfer completed interrupt */
+#define USB_OTG_DOEPINT_EPDISD                  ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt */
+#define USB_OTG_DOEPINT_STUP                    ((uint32_t)0x00000008)            /*!< SETUP phase done */
+#define USB_OTG_DOEPINT_OTEPDIS                 ((uint32_t)0x00000010)            /*!< OUT token received when endpoint disabled */
+#define USB_OTG_DOEPINT_B2BSTUP                 ((uint32_t)0x00000040)            /*!< Back-to-back SETUP packets received */
+#define USB_OTG_DOEPINT_NYET                    ((uint32_t)0x00004000)            /*!< NYET interrupt */
+
+/********************  Bit definition forUSB_OTG_DOEPTSIZ register  ********************/
+
+#define USB_OTG_DOEPTSIZ_XFRSIZ                  ((uint32_t)0x0007FFFF)            /*!< Transfer size */
+#define USB_OTG_DOEPTSIZ_PKTCNT                  ((uint32_t)0x1FF80000)            /*!< Packet count */
+
+#define USB_OTG_DOEPTSIZ_STUPCNT                 ((uint32_t)0x60000000)            /*!< SETUP packet count */
+#define USB_OTG_DOEPTSIZ_STUPCNT_0               ((uint32_t)0x20000000)            /*!<Bit 0 */
+#define USB_OTG_DOEPTSIZ_STUPCNT_1               ((uint32_t)0x40000000)            /*!<Bit 1 */
+
+/********************  Bit definition for PCGCCTL register  ********************/
+#define USB_OTG_PCGCCTL_STOPCLK                 ((uint32_t)0x00000001)            /*!< SETUP packet count */
+#define USB_OTG_PCGCCTL_GATECLK                 ((uint32_t)0x00000002)            /*!<Bit 0 */
+#define USB_OTG_PCGCCTL_PHYSUSP                 ((uint32_t)0x00000010)            /*!<Bit 1 */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+
+/******************************* ADC Instances ********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) (((INSTANCE) == ADC1) || \
+                                       ((INSTANCE) == ADC2) || \
+                                       ((INSTANCE) == ADC3))
+
+/******************************* CAN Instances ********************************/
+#define IS_CAN_ALL_INSTANCE(INSTANCE) (((INSTANCE) == CAN1) || \
+                                       ((INSTANCE) == CAN2))
+
+/******************************* CRC Instances ********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DAC Instances ********************************/
+#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC)
+
+/******************************* DCMI Instances *******************************/
+#define IS_DCMI_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DCMI)
+
+/******************************* DMA2D Instances *******************************/
+#define IS_DMA2D_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DMA2D)
+
+/******************************** DMA Instances *******************************/
+#define IS_DMA_STREAM_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Stream0) || \
+                                              ((INSTANCE) == DMA1_Stream1) || \
+                                              ((INSTANCE) == DMA1_Stream2) || \
+                                              ((INSTANCE) == DMA1_Stream3) || \
+                                              ((INSTANCE) == DMA1_Stream4) || \
+                                              ((INSTANCE) == DMA1_Stream5) || \
+                                              ((INSTANCE) == DMA1_Stream6) || \
+                                              ((INSTANCE) == DMA1_Stream7) || \
+                                              ((INSTANCE) == DMA2_Stream0) || \
+                                              ((INSTANCE) == DMA2_Stream1) || \
+                                              ((INSTANCE) == DMA2_Stream2) || \
+                                              ((INSTANCE) == DMA2_Stream3) || \
+                                              ((INSTANCE) == DMA2_Stream4) || \
+                                              ((INSTANCE) == DMA2_Stream5) || \
+                                              ((INSTANCE) == DMA2_Stream6) || \
+                                              ((INSTANCE) == DMA2_Stream7))
+
+/******************************* GPIO Instances *******************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+                                        ((INSTANCE) == GPIOB) || \
+                                        ((INSTANCE) == GPIOC) || \
+                                        ((INSTANCE) == GPIOD) || \
+                                        ((INSTANCE) == GPIOE) || \
+                                        ((INSTANCE) == GPIOF) || \
+                                        ((INSTANCE) == GPIOG) || \
+                                        ((INSTANCE) == GPIOH) || \
+                                        ((INSTANCE) == GPIOI) || \
+                                        ((INSTANCE) == GPIOJ) || \
+                                        ((INSTANCE) == GPIOK))
+
+/******************************** I2C Instances *******************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+                                       ((INSTANCE) == I2C2) || \
+                                       ((INSTANCE) == I2C3))
+
+/******************************** I2S Instances *******************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE)  (((INSTANCE) == SPI2) || \
+                                        ((INSTANCE) == SPI3))
+
+/*************************** I2S Extended Instances ***************************/
+#define IS_I2S_ALL_INSTANCE_EXT(PERIPH)  (((INSTANCE) == SPI2)    || \
+                                          ((INSTANCE) == SPI3)    || \
+                                          ((INSTANCE) == I2S2ext) || \
+                                          ((INSTANCE) == I2S3ext))
+
+/****************************** LTDC Instances ********************************/
+#define IS_LTDC_ALL_INSTANCE(INSTANCE)  ((INSTANCE) == LTDC)
+
+/******************************* RNG Instances ********************************/
+#define IS_RNG_ALL_INSTANCE(INSTANCE)  ((INSTANCE) == RNG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE)  ((INSTANCE) == RTC)
+
+/******************************* SAI Instances ********************************/
+#define IS_SAI_BLOCK_PERIPH(PERIPH) (((PERIPH) == SAI1_Block_A) || \
+                                     ((PERIPH) == SAI1_Block_B))
+
+/******************************** SPI Instances *******************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+                                       ((INSTANCE) == SPI2) || \
+                                       ((INSTANCE) == SPI3) || \
+                                       ((INSTANCE) == SPI4) || \
+                                       ((INSTANCE) == SPI5) || \
+                                       ((INSTANCE) == SPI6))
+
+/*************************** SPI Extended Instances ***************************/
+#define IS_SPI_ALL_INSTANCE_EXT(INSTANCE) (((INSTANCE) == SPI1)    || \
+                                           ((INSTANCE) == SPI2)    || \
+                                           ((INSTANCE) == SPI3)    || \
+                                           ((INSTANCE) == SPI4)    || \
+                                           ((INSTANCE) == SPI5)    || \
+                                           ((INSTANCE) == SPI6)    || \
+                                           ((INSTANCE) == I2S2ext) || \
+                                           ((INSTANCE) == I2S3ext))
+
+/****************** TIM Instances : All supported instances *******************/
+#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM1)   || \
+                                   ((INSTANCE) == TIM2)   || \
+                                   ((INSTANCE) == TIM3)   || \
+                                   ((INSTANCE) == TIM4)   || \
+                                   ((INSTANCE) == TIM5)   || \
+                                   ((INSTANCE) == TIM6)   || \
+                                   ((INSTANCE) == TIM7)   || \
+                                   ((INSTANCE) == TIM8)   || \
+                                   ((INSTANCE) == TIM9)   || \
+                                   ((INSTANCE) == TIM10)  || \
+                                   ((INSTANCE) == TIM11)  || \
+                                   ((INSTANCE) == TIM12)  || \
+                                   ((INSTANCE) == TIM13)  || \
+                                   ((INSTANCE) == TIM14))
+
+/************* TIM Instances : at least 1 capture/compare channel *************/
+#define IS_TIM_CC1_INSTANCE(INSTANCE)   (((INSTANCE) == TIM1)  || \
+                                         ((INSTANCE) == TIM2)  || \
+                                         ((INSTANCE) == TIM3)  || \
+                                         ((INSTANCE) == TIM4)  || \
+                                         ((INSTANCE) == TIM5)  || \
+                                         ((INSTANCE) == TIM8)  || \
+                                         ((INSTANCE) == TIM9)  || \
+                                         ((INSTANCE) == TIM10) || \
+                                         ((INSTANCE) == TIM11) || \
+                                         ((INSTANCE) == TIM12) || \
+                                         ((INSTANCE) == TIM13) || \
+                                         ((INSTANCE) == TIM14))
+
+/************ TIM Instances : at least 2 capture/compare channels *************/
+#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+                                       ((INSTANCE) == TIM2) || \
+                                       ((INSTANCE) == TIM3) || \
+                                       ((INSTANCE) == TIM4) || \
+                                       ((INSTANCE) == TIM5) || \
+                                       ((INSTANCE) == TIM8) || \
+                                       ((INSTANCE) == TIM9) || \
+                                       ((INSTANCE) == TIM12))
+
+/************ TIM Instances : at least 3 capture/compare channels *************/
+#define IS_TIM_CC3_INSTANCE(INSTANCE)   (((INSTANCE) == TIM1) || \
+                                         ((INSTANCE) == TIM2) || \
+                                         ((INSTANCE) == TIM3) || \
+                                         ((INSTANCE) == TIM4) || \
+                                         ((INSTANCE) == TIM5) || \
+                                         ((INSTANCE) == TIM8))
+
+/************ TIM Instances : at least 4 capture/compare channels *************/
+#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+                                       ((INSTANCE) == TIM2) || \
+                                       ((INSTANCE) == TIM3) || \
+                                       ((INSTANCE) == TIM4) || \
+                                       ((INSTANCE) == TIM5) || \
+                                       ((INSTANCE) == TIM8))
+
+/******************** TIM Instances : Advanced-control timers *****************/
+#define IS_TIM_ADVANCED_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+                                            ((INSTANCE) == TIM8))
+
+/******************* TIM Instances : Timer input XOR function *****************/
+#define IS_TIM_XOR_INSTANCE(INSTANCE)   (((INSTANCE) == TIM1) || \
+                                         ((INSTANCE) == TIM2) || \
+                                         ((INSTANCE) == TIM3) || \
+                                         ((INSTANCE) == TIM4) || \
+                                         ((INSTANCE) == TIM5) || \
+                                         ((INSTANCE) == TIM8))
+
+/****************** TIM Instances : DMA requests generation (UDE) *************/
+#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+                                       ((INSTANCE) == TIM2) || \
+                                       ((INSTANCE) == TIM3) || \
+                                       ((INSTANCE) == TIM4) || \
+                                       ((INSTANCE) == TIM5) || \
+                                       ((INSTANCE) == TIM6) || \
+                                       ((INSTANCE) == TIM7) || \
+                                       ((INSTANCE) == TIM8))
+
+/************ TIM Instances : DMA requests generation (CCxDE) *****************/
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+                                          ((INSTANCE) == TIM2) || \
+                                          ((INSTANCE) == TIM3) || \
+                                          ((INSTANCE) == TIM4) || \
+                                          ((INSTANCE) == TIM5) || \
+                                          ((INSTANCE) == TIM8))
+
+/************ TIM Instances : DMA requests generation (COMDE) *****************/
+#define IS_TIM_CCDMA_INSTANCE(INSTANCE)  (((INSTANCE) == TIM1) || \
+                                          ((INSTANCE) == TIM2) || \
+                                          ((INSTANCE) == TIM3) || \
+                                          ((INSTANCE) == TIM4) || \
+                                          ((INSTANCE) == TIM5) || \
+                                          ((INSTANCE) == TIM8))
+
+/******************** TIM Instances : DMA burst feature ***********************/
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)  (((INSTANCE) == TIM1) || \
+                                             ((INSTANCE) == TIM2) || \
+                                             ((INSTANCE) == TIM3) || \
+                                             ((INSTANCE) == TIM4) || \
+                                             ((INSTANCE) == TIM5) || \
+                                             ((INSTANCE) == TIM8))
+
+/****** TIM Instances : master mode available (TIMx_CR2.MMS available )********/
+#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+                                          ((INSTANCE) == TIM2) || \
+                                          ((INSTANCE) == TIM3) || \
+                                          ((INSTANCE) == TIM4) || \
+                                          ((INSTANCE) == TIM5) || \
+                                          ((INSTANCE) == TIM6) || \
+                                          ((INSTANCE) == TIM7) || \
+                                          ((INSTANCE) == TIM8) || \
+                                          ((INSTANCE) == TIM9) || \
+                                          ((INSTANCE) == TIM12))
+
+/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+                                         ((INSTANCE) == TIM2) || \
+                                         ((INSTANCE) == TIM3) || \
+                                         ((INSTANCE) == TIM4) || \
+                                         ((INSTANCE) == TIM5) || \
+                                         ((INSTANCE) == TIM8) || \
+                                         ((INSTANCE) == TIM9) || \
+                                         ((INSTANCE) == TIM12))
+
+/********************** TIM Instances : 32 bit Counter ************************/
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)(((INSTANCE) == TIM2) || \
+                                              ((INSTANCE) == TIM5))
+
+/***************** TIM Instances : external trigger input availabe ************/
+#define IS_TIM_ETR_INSTANCE(INSTANCE)  (((INSTANCE) == TIM1) || \
+                                        ((INSTANCE) == TIM2) || \
+                                        ((INSTANCE) == TIM3) || \
+                                        ((INSTANCE) == TIM4) || \
+                                        ((INSTANCE) == TIM5) || \
+                                        ((INSTANCE) == TIM8))
+
+/****************** TIM Instances : remapping capability **********************/
+#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2)  || \
+                                         ((INSTANCE) == TIM5)  || \
+                                         ((INSTANCE) == TIM11))
+
+/******************* TIM Instances : output(s) available **********************/
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+    ((((INSTANCE) == TIM1) &&                  \
+     (((CHANNEL) == TIM_CHANNEL_1) ||          \
+      ((CHANNEL) == TIM_CHANNEL_2) ||          \
+      ((CHANNEL) == TIM_CHANNEL_3) ||          \
+      ((CHANNEL) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((INSTANCE) == TIM2) &&                   \
+     (((CHANNEL) == TIM_CHANNEL_1) ||          \
+      ((CHANNEL) == TIM_CHANNEL_2) ||          \
+      ((CHANNEL) == TIM_CHANNEL_3) ||          \
+      ((CHANNEL) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((INSTANCE) == TIM3) &&                   \
+     (((CHANNEL) == TIM_CHANNEL_1) ||          \
+      ((CHANNEL) == TIM_CHANNEL_2) ||          \
+      ((CHANNEL) == TIM_CHANNEL_3) ||          \
+      ((CHANNEL) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((INSTANCE) == TIM4) &&                   \
+     (((CHANNEL) == TIM_CHANNEL_1) ||          \
+      ((CHANNEL) == TIM_CHANNEL_2) ||          \
+      ((CHANNEL) == TIM_CHANNEL_3) ||          \
+      ((CHANNEL) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((INSTANCE) == TIM5) &&                   \
+     (((CHANNEL) == TIM_CHANNEL_1) ||          \
+      ((CHANNEL) == TIM_CHANNEL_2) ||          \
+      ((CHANNEL) == TIM_CHANNEL_3) ||          \
+      ((CHANNEL) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((INSTANCE) == TIM8) &&                   \
+     (((CHANNEL) == TIM_CHANNEL_1) ||          \
+      ((CHANNEL) == TIM_CHANNEL_2) ||          \
+      ((CHANNEL) == TIM_CHANNEL_3) ||          \
+      ((CHANNEL) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((INSTANCE) == TIM9) &&                   \
+     (((CHANNEL) == TIM_CHANNEL_1) ||          \
+      ((CHANNEL) == TIM_CHANNEL_2)))           \
+    ||                                         \
+    (((INSTANCE) == TIM10) &&                  \
+     (((CHANNEL) == TIM_CHANNEL_1)))           \
+    ||                                         \
+    (((INSTANCE) == TIM11) &&                  \
+     (((CHANNEL) == TIM_CHANNEL_1)))           \
+    ||                                         \
+    (((INSTANCE) == TIM12) &&                  \
+     (((CHANNEL) == TIM_CHANNEL_1) ||          \
+      ((CHANNEL) == TIM_CHANNEL_2)))           \
+    ||                                         \
+    (((INSTANCE) == TIM13) &&                  \
+     (((CHANNEL) == TIM_CHANNEL_1)))           \
+    ||                                         \
+    (((INSTANCE) == TIM14) &&                  \
+     (((CHANNEL) == TIM_CHANNEL_1))))
+
+/************ TIM Instances : complementary output(s) available ***************/
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+   ((((INSTANCE) == TIM1) &&                    \
+     (((CHANNEL) == TIM_CHANNEL_1) ||           \
+      ((CHANNEL) == TIM_CHANNEL_2) ||           \
+      ((CHANNEL) == TIM_CHANNEL_3)))            \
+    ||                                          \
+    (((INSTANCE) == TIM8) &&                    \
+     (((CHANNEL) == TIM_CHANNEL_1) ||           \
+      ((CHANNEL) == TIM_CHANNEL_2) ||           \
+      ((CHANNEL) == TIM_CHANNEL_3))))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+                                     ((INSTANCE) == USART2) || \
+                                     ((INSTANCE) == USART3) || \
+                                     ((INSTANCE) == USART6))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+                                    ((INSTANCE) == USART2) || \
+                                    ((INSTANCE) == USART3) || \
+                                    ((INSTANCE) == UART4)  || \
+                                    ((INSTANCE) == UART5)  || \
+                                    ((INSTANCE) == USART6) || \
+                                    ((INSTANCE) == UART7)  || \
+                                    ((INSTANCE) == UART8))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+                                           ((INSTANCE) == USART2) || \
+                                           ((INSTANCE) == USART3) || \
+                                           ((INSTANCE) == USART6))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+                                         ((INSTANCE) == USART2) || \
+                                         ((INSTANCE) == USART3) || \
+                                         ((INSTANCE) == USART6))
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+                                    ((INSTANCE) == USART2) || \
+                                    ((INSTANCE) == USART3) || \
+                                    ((INSTANCE) == UART4)  || \
+                                    ((INSTANCE) == UART5)  || \
+                                    ((INSTANCE) == USART6) || \
+                                    ((INSTANCE) == UART7)  || \
+                                    ((INSTANCE) == UART8))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE)  ((INSTANCE) == IWDG)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE)  ((INSTANCE) == WWDG)
+
+/****************************** SDIO Instances ********************************/
+#define IS_SDIO_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SDIO)
+
+/****************************** USB Exported Constants ************************/
+#define USB_OTG_FS_HOST_MAX_CHANNEL_NBR                8
+#define USB_OTG_FS_MAX_IN_ENDPOINTS                    4    /* Including EP0 */
+#define USB_OTG_FS_MAX_OUT_ENDPOINTS                   4    /* Including EP0 */
+#define USB_OTG_FS_TOTAL_FIFO_SIZE                     1280 /* in Bytes */
+
+#define USB_OTG_HS_HOST_MAX_CHANNEL_NBR                12
+#define USB_OTG_HS_MAX_IN_ENDPOINTS                    6    /* Including EP0 */
+#define USB_OTG_HS_MAX_IN_ENDPOINTS                    6    /* Including EP0 */
+#define USB_OTG_HS_TOTAL_FIFO_SIZE                     4096 /* in Bytes */
+
+/******************************************************************************/
+/*  For a painless codes migration between the STM32F4xx device product       */
+/*  lines, the aliases defined below are put in place to overcome the         */
+/*  differences in the interrupt handlers and IRQn definitions.               */
+/*  No need to update developed interrupt code when moving across             */
+/*  product lines within the same STM32F4 Family                              */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define FSMC_IRQn              FMC_IRQn
+
+/* Aliases for __IRQHandler */
+#define FSMC_IRQHandler        FMC_IRQHandler
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F429xx_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h b/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h
new file mode 100644
index 0000000..d296325
--- /dev/null
+++ b/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h
@@ -0,0 +1,232 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx.h
+  * @author  MCD Application Team
+  * @version V2.3.2
+  * @date    26-June-2015
+  * @brief   CMSIS STM32F4xx Device Peripheral Access Layer Header File.
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The STM32F4xx device used in the target application
+  *              - To use or not the peripheral�s drivers in application code(i.e.
+  *                code will be based on direct access to peripheral�s registers
+  *                rather than drivers API), this option is controlled by
+  *                "#define USE_HAL_DRIVER"
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx
+  * @{
+  */
+
+#ifndef __STM32F4xx_H
+#define __STM32F4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined  (STM32F4)
+#define STM32F4
+#endif /* STM32F4 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+   application
+  */
+#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \
+    !defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \
+    !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F411xE) && !defined (STM32F446xx)
+  /* #define STM32F405xx */   /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */
+  /* #define STM32F415xx */   /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */
+  /* #define STM32F407xx */   /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG  and STM32F407IE Devices */
+  /* #define STM32F417xx */   /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */
+  /* #define STM32F427xx */   /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */
+  /* #define STM32F437xx */   /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */
+  /* #define STM32F429xx */   /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG,
+                                   STM32F439NI, STM32F429IG  and STM32F429II Devices */
+  /* #define STM32F439xx */   /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG,
+                                   STM32F439NI, STM32F439IG and STM32F439II Devices */
+  /* #define STM32F401xC */   /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */
+  /* #define STM32F401xE */   /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */
+  /* #define STM32F411xE */   /*!< STM32F411CD, STM32F411RD, STM32F411VD, STM32F411CE, STM32F411RE and STM32F411VE Devices */
+  /* #define STM32F446xx */   /*!< STM32F446MC, STM32F446ME, STM32F446RC, STM32F446RE, STM32F446VC, STM32F446VE, STM32F446ZC,
+                                   and STM32F446ZE Devices */
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will
+   be based on direct access to peripherals registers
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V2.3.2
+  */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_MAIN   (0x02) /*!< [31:24] main version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB1   (0x03) /*!< [23:16] sub1 version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB2   (0x02) /*!< [15:8]  sub2 version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION        ((__STM32F4xx_CMSIS_DEVICE_VERSION_MAIN << 24)\
+                                                |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\
+                                                |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\
+                                                |(__STM32F4xx_CMSIS_DEVICE_VERSION))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32F405xx)
+  #include "stm32f405xx.h"
+#elif defined(STM32F415xx)
+  #include "stm32f415xx.h"
+#elif defined(STM32F407xx)
+  #include "stm32f407xx.h"
+#elif defined(STM32F417xx)
+  #include "stm32f417xx.h"
+#elif defined(STM32F427xx)
+  #include "stm32f427xx.h"
+#elif defined(STM32F437xx)
+  #include "stm32f437xx.h"
+#elif defined(STM32F429xx)
+  #include "stm32f429xx.h"
+#elif defined(STM32F439xx)
+  #include "stm32f439xx.h"
+#elif defined(STM32F401xC)
+  #include "stm32f401xc.h"
+#elif defined(STM32F401xE)
+  #include "stm32f401xe.h"
+#elif defined(STM32F411xE)
+  #include "stm32f411xe.h"
+#elif defined(STM32F446xx)
+  #include "stm32f446xx.h"
+#else
+ #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */
+typedef enum
+{
+  RESET = 0,
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+  DISABLE = 0,
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+  ERROR = 0,
+  SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macro
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL)))
+
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F4xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h b/Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h
new file mode 100644
index 0000000..bb5863f
--- /dev/null
+++ b/Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h
@@ -0,0 +1,122 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f4xx.h
+  * @author  MCD Application Team
+  * @version V2.3.2
+  * @date    26-June-2015
+  * @brief   CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx_system
+  * @{
+  */
+
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F4XX_H
+#define __SYSTEM_STM32F4XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F4xx_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F4xx_System_Exported_types
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Exported_Functions
+  * @{
+  */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F4XX_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/CMSIS/Include/core_cm4.h b/Drivers/CMSIS/Include/core_cm4.h
new file mode 100644
index 0000000..bb6be13
--- /dev/null
+++ b/Drivers/CMSIS/Include/core_cm4.h
@@ -0,0 +1,1802 @@
+/**************************************************************************//**
+ * @file     core_cm4.h
+ * @brief    CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version  V4.00
+ * @date     22. August 2014
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+  @{
+ */
+
+/*  CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN  (0x04)                                   /*!< [31:16] CMSIS HAL main version   */
+#define __CM4_CMSIS_VERSION_SUB   (0x00)                                   /*!< [15:0]  CMSIS HAL sub version    */
+#define __CM4_CMSIS_VERSION       ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+                                    __CM4_CMSIS_VERSION_SUB          )     /*!< CMSIS HAL version number         */
+
+#define __CORTEX_M                (0x04)                                   /*!< Cortex-M Core                    */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TMS470__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __CSMC__ )
+  #define __packed
+  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler      */
+  #define __INLINE         inline                                    /*use -pc99 on compile line !< inline keyword for COSMIC Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __TMS470__ )
+  #if defined __TI_VFP_SUPPORT__
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __CSMC__ )		/* Cosmic */
+  #if ( __CSMC__ & 0x400)		// FPU present for parser
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+#endif
+
+#include <stdint.h>                      /* standard types definitions                      */
+#include <core_cmInstr.h>                /* Core Instruction Access                         */
+#include <core_cmFunc.h>                 /* Core Function Access                            */
+#include <core_cmSimd.h>                 /* Compiler specific SIMD Intrinsics               */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM4_REV
+    #define __CM4_REV               0x0000
+    #warning "__CM4_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          4
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+    \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_CORE  Status and Control Registers
+    \brief  Core Register type definitions.
+  @{
+ */
+
+/** \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+#if (__CORTEX_M != 0x04)
+    uint32_t _reserved0:27;              /*!< bit:  0..26  Reserved                           */
+#else
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved                           */
+#endif
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} APSR_Type;
+
+
+/** \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} IPSR_Type;
+
+
+/** \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+#if (__CORTEX_M != 0x04)
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved                           */
+#else
+    uint32_t _reserved0:7;               /*!< bit:  9..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved                           */
+#endif
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0)          */
+    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0)          */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} xPSR_Type;
+
+
+/** \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used                   */
+    uint32_t FPCA:1;                     /*!< bit:      2  FP extension active flag           */
+    uint32_t _reserved0:29;              /*!< bit:  3..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+    \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IO uint32_t ISER[8];                 /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register           */
+       uint32_t RESERVED0[24];
+  __IO uint32_t ICER[8];                 /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register         */
+       uint32_t RSERVED1[24];
+  __IO uint32_t ISPR[8];                 /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register          */
+       uint32_t RESERVED2[24];
+  __IO uint32_t ICPR[8];                 /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register        */
+       uint32_t RESERVED3[24];
+  __IO uint32_t IABR[8];                 /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register           */
+       uint32_t RESERVED4[56];
+  __IO uint8_t  IP[240];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+       uint32_t RESERVED5[644];
+  __O  uint32_t STIR;                    /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register     */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0                                          /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL << NVIC_STIR_INTID_Pos)            /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCB     System Control Block (SCB)
+    \brief      Type definitions for the System Control Block Registers
+  @{
+ */
+
+/** \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __I  uint32_t CPUID;                   /*!< Offset: 0x000 (R/ )  CPUID Base Register                                   */
+  __IO uint32_t ICSR;                    /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register                  */
+  __IO uint32_t VTOR;                    /*!< Offset: 0x008 (R/W)  Vector Table Offset Register                          */
+  __IO uint32_t AIRCR;                   /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register      */
+  __IO uint32_t SCR;                     /*!< Offset: 0x010 (R/W)  System Control Register                               */
+  __IO uint32_t CCR;                     /*!< Offset: 0x014 (R/W)  Configuration Control Register                        */
+  __IO uint8_t  SHP[12];                 /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IO uint32_t SHCSR;                   /*!< Offset: 0x024 (R/W)  System Handler Control and State Register             */
+  __IO uint32_t CFSR;                    /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register                    */
+  __IO uint32_t HFSR;                    /*!< Offset: 0x02C (R/W)  HardFault Status Register                             */
+  __IO uint32_t DFSR;                    /*!< Offset: 0x030 (R/W)  Debug Fault Status Register                           */
+  __IO uint32_t MMFAR;                   /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register                      */
+  __IO uint32_t BFAR;                    /*!< Offset: 0x038 (R/W)  BusFault Address Register                             */
+  __IO uint32_t AFSR;                    /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register                       */
+  __I  uint32_t PFR[2];                  /*!< Offset: 0x040 (R/ )  Processor Feature Register                            */
+  __I  uint32_t DFR;                     /*!< Offset: 0x048 (R/ )  Debug Feature Register                                */
+  __I  uint32_t ADR;                     /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register                            */
+  __I  uint32_t MMFR[4];                 /*!< Offset: 0x050 (R/ )  Memory Model Feature Register                         */
+  __I  uint32_t ISAR[5];                 /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register                   */
+       uint32_t RESERVED0[5];
+  __IO uint32_t CPACR;                   /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register                   */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24                                             /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20                                             /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16                                             /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4                                             /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0                                             /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL << SCB_CPUID_REVISION_Pos)              /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31                                             /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28                                             /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27                                             /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26                                             /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25                                             /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23                                             /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22                                             /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12                                             /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11                                             /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0                                             /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos)           /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7                                             /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16                                             /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16                                             /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15                                             /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8                                             /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2                                             /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1                                             /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos             0                                             /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk            (1UL << SCB_AIRCR_VECTRESET_Pos)               /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4                                             /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2                                             /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1                                             /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9                                             /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8                                             /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4                                             /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3                                             /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1                                             /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos          0                                             /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk         (1UL << SCB_CCR_NONBASETHRDENA_Pos)            /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos          18                                             /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17                                             /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16                                             /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15                                             /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14                                             /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13                                             /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12                                             /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11                                             /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10                                             /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8                                             /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7                                             /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3                                             /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1                                             /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0                                             /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL << SCB_SHCSR_MEMFAULTACT_Pos)             /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16                                             /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8                                             /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0                                             /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos)            /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31                                             /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30                                             /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1                                             /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4                                             /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3                                             /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2                                             /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1                                             /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0                                             /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL << SCB_DFSR_HALTED_Pos)                   /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+    \brief      Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/** \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+       uint32_t RESERVED0[1];
+  __I  uint32_t ICTR;                    /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register      */
+  __IO uint32_t ACTLR;                   /*!< Offset: 0x008 (R/W)  Auxiliary Control Register              */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0                                          /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos)      /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos            9                                          /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk           (1UL << SCnSCB_ACTLR_DISOOFP_Pos)           /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos            8                                          /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk           (1UL << SCnSCB_ACTLR_DISFPCA_Pos)           /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos            2                                          /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk           (1UL << SCnSCB_ACTLR_DISFOLD_Pos)           /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos         1                                          /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk        (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos)        /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos         0                                          /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk        (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos)        /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+    \brief      Type definitions for the System Timer Registers.
+  @{
+ */
+
+/** \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                    /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                     /*!< Offset: 0x008 (R/W)  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                   /*!< Offset: 0x00C (R/ )  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL << SysTick_CTRL_ENABLE_Pos)               /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos)        /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos)        /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos)        /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+    \brief      Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/** \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __O  union
+  {
+    __O  uint8_t    u8;                  /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit                   */
+    __O  uint16_t   u16;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit                  */
+    __O  uint32_t   u32;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit                  */
+  }  PORT [32];                          /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers               */
+       uint32_t RESERVED0[864];
+  __IO uint32_t TER;                     /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register                 */
+       uint32_t RESERVED1[15];
+  __IO uint32_t TPR;                     /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register              */
+       uint32_t RESERVED2[15];
+  __IO uint32_t TCR;                     /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register                */
+       uint32_t RESERVED3[29];
+  __O  uint32_t IWR;                     /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register            */
+  __I  uint32_t IRR;                     /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register             */
+  __IO uint32_t IMCR;                    /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register     */
+       uint32_t RESERVED4[43];
+  __O  uint32_t LAR;                     /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register                  */
+  __I  uint32_t LSR;                     /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register                  */
+       uint32_t RESERVED5[6];
+  __I  uint32_t PID4;                    /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __I  uint32_t PID5;                    /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __I  uint32_t PID6;                    /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __I  uint32_t PID7;                    /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __I  uint32_t PID0;                    /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __I  uint32_t PID1;                    /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __I  uint32_t PID2;                    /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __I  uint32_t PID3;                    /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __I  uint32_t CID0;                    /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __I  uint32_t CID1;                    /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __I  uint32_t CID2;                    /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __I  uint32_t CID3;                    /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0                                             /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFUL << ITM_TPR_PRIVMASK_Pos)                /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23                                             /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos             16                                             /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk             (0x7FUL << ITM_TCR_TraceBusID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10                                             /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos              8                                             /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk             (3UL << ITM_TCR_TSPrescale_Pos)                /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4                                             /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3                                             /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2                                             /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1                                             /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0                                             /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL << ITM_TCR_ITMENA_Pos)                    /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0                                             /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL << ITM_IWR_ATVALIDM_Pos)                  /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0                                             /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL << ITM_IRR_ATREADYM_Pos)                  /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0                                             /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL << ITM_IMCR_INTEGRATION_Pos)              /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2                                             /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1                                             /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0                                             /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL << ITM_LSR_Present_Pos)                   /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+    \brief      Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/** \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  Control Register                          */
+  __IO uint32_t CYCCNT;                  /*!< Offset: 0x004 (R/W)  Cycle Count Register                      */
+  __IO uint32_t CPICNT;                  /*!< Offset: 0x008 (R/W)  CPI Count Register                        */
+  __IO uint32_t EXCCNT;                  /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register         */
+  __IO uint32_t SLEEPCNT;                /*!< Offset: 0x010 (R/W)  Sleep Count Register                      */
+  __IO uint32_t LSUCNT;                  /*!< Offset: 0x014 (R/W)  LSU Count Register                        */
+  __IO uint32_t FOLDCNT;                 /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register         */
+  __I  uint32_t PCSR;                    /*!< Offset: 0x01C (R/ )  Program Counter Sample Register           */
+  __IO uint32_t COMP0;                   /*!< Offset: 0x020 (R/W)  Comparator Register 0                     */
+  __IO uint32_t MASK0;                   /*!< Offset: 0x024 (R/W)  Mask Register 0                           */
+  __IO uint32_t FUNCTION0;               /*!< Offset: 0x028 (R/W)  Function Register 0                       */
+       uint32_t RESERVED0[1];
+  __IO uint32_t COMP1;                   /*!< Offset: 0x030 (R/W)  Comparator Register 1                     */
+  __IO uint32_t MASK1;                   /*!< Offset: 0x034 (R/W)  Mask Register 1                           */
+  __IO uint32_t FUNCTION1;               /*!< Offset: 0x038 (R/W)  Function Register 1                       */
+       uint32_t RESERVED1[1];
+  __IO uint32_t COMP2;                   /*!< Offset: 0x040 (R/W)  Comparator Register 2                     */
+  __IO uint32_t MASK2;                   /*!< Offset: 0x044 (R/W)  Mask Register 2                           */
+  __IO uint32_t FUNCTION2;               /*!< Offset: 0x048 (R/W)  Function Register 2                       */
+       uint32_t RESERVED2[1];
+  __IO uint32_t COMP3;                   /*!< Offset: 0x050 (R/W)  Comparator Register 3                     */
+  __IO uint32_t MASK3;                   /*!< Offset: 0x054 (R/W)  Mask Register 3                           */
+  __IO uint32_t FUNCTION3;               /*!< Offset: 0x058 (R/W)  Function Register 3                       */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28                                          /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27                                          /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26                                          /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25                                          /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24                                          /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22                                          /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21                                          /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20                                          /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19                                          /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18                                          /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17                                          /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16                                          /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12                                          /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10                                          /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9                                          /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5                                          /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1                                          /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0                                          /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL << DWT_CTRL_CYCCNTENA_Pos)           /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0                                          /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL << DWT_CPICNT_CPICNT_Pos)           /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0                                          /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL << DWT_EXCCNT_EXCCNT_Pos)           /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0                                          /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos)       /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0                                          /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL << DWT_LSUCNT_LSUCNT_Pos)           /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0                                          /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos)         /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos                   0                                          /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk                  (0x1FUL << DWT_MASK_MASK_Pos)               /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos           24                                          /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos        16                                          /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos)      /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos        12                                          /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos)      /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10                                          /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos            9                                          /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk           (0x1UL << DWT_FUNCTION_LNK1ENA_Pos)         /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos         8                                          /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk        (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos)      /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos           7                                          /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk          (0x1UL << DWT_FUNCTION_CYCMATCH_Pos)        /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos          5                                          /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk         (0x1UL << DWT_FUNCTION_EMITRANGE_Pos)       /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos           0                                          /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk          (0xFUL << DWT_FUNCTION_FUNCTION_Pos)        /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+    \brief      Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/** \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IO uint32_t SSPSR;                   /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register     */
+  __IO uint32_t CSPSR;                   /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+       uint32_t RESERVED0[2];
+  __IO uint32_t ACPR;                    /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+       uint32_t RESERVED1[55];
+  __IO uint32_t SPPR;                    /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+       uint32_t RESERVED2[131];
+  __I  uint32_t FFSR;                    /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IO uint32_t FFCR;                    /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __I  uint32_t FSCR;                    /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
+       uint32_t RESERVED3[759];
+  __I  uint32_t TRIGGER;                 /*!< Offset: 0xEE8 (R/ )  TRIGGER */
+  __I  uint32_t FIFO0;                   /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
+  __I  uint32_t ITATBCTR2;               /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
+       uint32_t RESERVED4[1];
+  __I  uint32_t ITATBCTR0;               /*!< Offset: 0xEF8 (R/ )  ITATBCTR0 */
+  __I  uint32_t FIFO1;                   /*!< Offset: 0xEFC (R/ )  Integration ITM Data */
+  __IO uint32_t ITCTRL;                  /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+       uint32_t RESERVED5[39];
+  __IO uint32_t CLAIMSET;                /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IO uint32_t CLAIMCLR;                /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+       uint32_t RESERVED7[8];
+  __I  uint32_t DEVID;                   /*!< Offset: 0xFC8 (R/ )  TPIU_DEVID */
+  __I  uint32_t DEVTYPE;                 /*!< Offset: 0xFCC (R/ )  TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0                                          /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL << TPI_ACPR_PRESCALER_Pos)        /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0                                          /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL << TPI_SPPR_TXMODE_Pos)              /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3                                          /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2                                          /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1                                          /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0                                          /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL << TPI_FFSR_FlInProg_Pos)            /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8                                          /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1                                          /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0                                          /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL << TPI_TRIGGER_TRIGGER_Pos)          /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos          29                                          /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos)        /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos        27                                          /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk        (0x3UL << TPI_FIFO0_ITM_bytecount_Pos)      /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos          26                                          /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos)        /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos        24                                          /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk        (0x3UL << TPI_FIFO0_ETM_bytecount_Pos)      /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos                 16                                          /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk                 (0xFFUL << TPI_FIFO0_ETM2_Pos)              /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos                  8                                          /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk                 (0xFFUL << TPI_FIFO0_ETM1_Pos)              /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos                  0                                          /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk                 (0xFFUL << TPI_FIFO0_ETM0_Pos)              /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos           0                                          /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk          (0x1UL << TPI_ITATBCTR2_ATREADY_Pos)        /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos          29                                          /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos)        /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos        27                                          /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk        (0x3UL << TPI_FIFO1_ITM_bytecount_Pos)      /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos          26                                          /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos)        /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos        24                                          /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk        (0x3UL << TPI_FIFO1_ETM_bytecount_Pos)      /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos                 16                                          /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk                 (0xFFUL << TPI_FIFO1_ITM2_Pos)              /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos                  8                                          /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk                 (0xFFUL << TPI_FIFO1_ITM1_Pos)              /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos                  0                                          /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk                 (0xFFUL << TPI_FIFO1_ITM0_Pos)              /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos           0                                          /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk          (0x1UL << TPI_ITATBCTR0_ATREADY_Pos)        /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0                                          /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x1UL << TPI_ITCTRL_Mode_Pos)              /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11                                          /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10                                          /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9                                          /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos              6                                          /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk             (0x7UL << TPI_DEVID_MinBufSz_Pos)           /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos             5                                          /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk            (0x1UL << TPI_DEVID_AsynClkIn_Pos)          /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0                                          /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x1FUL << TPI_DEVID_NrTraceInput_Pos)      /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos             0                                          /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL << TPI_DEVTYPE_SubType_Pos)          /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos           4                                          /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+    \brief      Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/** \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __I  uint32_t TYPE;                    /*!< Offset: 0x000 (R/ )  MPU Type Register                              */
+  __IO uint32_t CTRL;                    /*!< Offset: 0x004 (R/W)  MPU Control Register                           */
+  __IO uint32_t RNR;                     /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register                     */
+  __IO uint32_t RBAR;                    /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register               */
+  __IO uint32_t RASR;                    /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register         */
+  __IO uint32_t RBAR_A1;                 /*!< Offset: 0x014 (R/W)  MPU Alias 1 Region Base Address Register       */
+  __IO uint32_t RASR_A1;                 /*!< Offset: 0x018 (R/W)  MPU Alias 1 Region Attribute and Size Register */
+  __IO uint32_t RBAR_A2;                 /*!< Offset: 0x01C (R/W)  MPU Alias 2 Region Base Address Register       */
+  __IO uint32_t RASR_A2;                 /*!< Offset: 0x020 (R/W)  MPU Alias 2 Region Attribute and Size Register */
+  __IO uint32_t RBAR_A3;                 /*!< Offset: 0x024 (R/W)  MPU Alias 3 Region Base Address Register       */
+  __IO uint32_t RASR_A3;                 /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos               16                                             /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8                                             /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0                                             /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL << MPU_TYPE_SEPARATE_Pos)                 /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos             2                                             /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1                                             /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0                                             /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL << MPU_CTRL_ENABLE_Pos)                   /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos                  0                                             /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL << MPU_RNR_REGION_Pos)                 /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos                   5                                             /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos)             /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4                                             /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0                                             /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL << MPU_RBAR_REGION_Pos)                 /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos                 16                                             /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28                                             /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24                                             /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19                                             /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18                                             /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17                                             /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16                                             /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8                                             /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1                                             /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0                                             /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL << MPU_RASR_ENABLE_Pos)                   /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_FPU     Floating Point Unit (FPU)
+    \brief      Type definitions for the Floating Point Unit (FPU)
+  @{
+ */
+
+/** \brief  Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+       uint32_t RESERVED0[1];
+  __IO uint32_t FPCCR;                   /*!< Offset: 0x004 (R/W)  Floating-Point Context Control Register               */
+  __IO uint32_t FPCAR;                   /*!< Offset: 0x008 (R/W)  Floating-Point Context Address Register               */
+  __IO uint32_t FPDSCR;                  /*!< Offset: 0x00C (R/W)  Floating-Point Default Status Control Register        */
+  __I  uint32_t MVFR0;                   /*!< Offset: 0x010 (R/ )  Media and FP Feature Register 0                       */
+  __I  uint32_t MVFR1;                   /*!< Offset: 0x014 (R/ )  Media and FP Feature Register 1                       */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos                31                                             /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk                (1UL << FPU_FPCCR_ASPEN_Pos)                   /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos                30                                             /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk                (1UL << FPU_FPCCR_LSPEN_Pos)                   /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos                8                                             /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk               (1UL << FPU_FPCCR_MONRDY_Pos)                  /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos                 6                                             /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk                (1UL << FPU_FPCCR_BFRDY_Pos)                   /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos                 5                                             /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk                (1UL << FPU_FPCCR_MMRDY_Pos)                   /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos                 4                                             /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk                (1UL << FPU_FPCCR_HFRDY_Pos)                   /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos                3                                             /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk               (1UL << FPU_FPCCR_THREAD_Pos)                  /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos                  1                                             /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk                 (1UL << FPU_FPCCR_USER_Pos)                    /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos                0                                             /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk               (1UL << FPU_FPCCR_LSPACT_Pos)                  /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos               3                                             /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk              (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos)        /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos                 26                                             /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk                 (1UL << FPU_FPDSCR_AHP_Pos)                    /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos                  25                                             /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk                  (1UL << FPU_FPDSCR_DN_Pos)                     /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos                  24                                             /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk                  (1UL << FPU_FPDSCR_FZ_Pos)                     /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos               22                                             /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk               (3UL << FPU_FPDSCR_RMode_Pos)                  /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos    28                                             /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk    (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos)     /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos        24                                             /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk        (0xFUL << FPU_MVFR0_Short_vectors_Pos)         /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos          20                                             /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk          (0xFUL << FPU_MVFR0_Square_root_Pos)           /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos               16                                             /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk               (0xFUL << FPU_MVFR0_Divide_Pos)                /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos    12                                             /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk    (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos)     /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos      8                                             /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk     (0xFUL << FPU_MVFR0_Double_precision_Pos)      /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos      4                                             /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk     (0xFUL << FPU_MVFR0_Single_precision_Pos)      /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos      0                                             /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk     (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos)      /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos         28                                             /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk         (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos)          /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos              24                                             /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk              (0xFUL << FPU_MVFR1_FP_HPFP_Pos)               /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos            4                                             /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk           (0xFUL << FPU_MVFR1_D_NaN_mode_Pos)            /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos              0                                             /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk             (0xFUL << FPU_MVFR1_FtZ_mode_Pos)              /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+    \brief      Type definitions for the Core Debug Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IO uint32_t DHCSR;                   /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register    */
+  __O  uint32_t DCRSR;                   /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register        */
+  __IO uint32_t DCRDR;                   /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register            */
+  __IO uint32_t DEMCR;                   /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16                                             /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25                                             /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24                                             /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19                                             /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18                                             /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17                                             /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16                                             /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5                                             /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3                                             /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2                                             /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1                                             /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0                                             /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos)         /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos         16                                             /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0                                             /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos)         /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos         24                                             /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19                                             /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18                                             /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17                                             /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16                                             /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10                                             /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9                                             /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8                                             /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7                                             /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6                                             /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5                                             /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4                                             /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0                                             /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos)      /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_core_base     Core Definitions
+    \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address  */
+#define ITM_BASE            (0xE0000000UL)                            /*!< ITM Base Address                   */
+#define DWT_BASE            (0xE0001000UL)                            /*!< DWT Base Address                   */
+#define TPI_BASE            (0xE0040000UL)                            /*!< TPI Base Address                   */
+#define CoreDebug_BASE      (0xE000EDF0UL)                            /*!< Core Debug Base Address            */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address               */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address                  */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address  */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct           */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct       */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct          */
+#define ITM                 ((ITM_Type       *)     ITM_BASE      )   /*!< ITM configuration struct           */
+#define DWT                 ((DWT_Type       *)     DWT_BASE      )   /*!< DWT configuration struct           */
+#define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct           */
+#define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct    */
+
+#if (__MPU_PRESENT == 1)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit             */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit             */
+#endif
+
+#if (__FPU_PRESENT == 1)
+  #define FPU_BASE          (SCS_BASE +  0x0F30UL)                    /*!< Floating Point Unit                */
+  #define FPU               ((FPU_Type       *)     FPU_BASE      )   /*!< Floating Point Unit                */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+    \brief      Functions that manage interrupts and exceptions via the NVIC.
+    @{
+ */
+
+/** \brief  Set Priority Grouping
+
+  The function sets the priority grouping field using the required unlock sequence.
+  The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+  Only values from 0..7 are used.
+  In case of a conflict between priority grouping and available
+  priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+    \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07);               /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk);             /* clear bits to change               */
+  reg_value  =  (reg_value                                 |
+                ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << 8));                                     /* Insert write key and priorty group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/** \brief  Get Priority Grouping
+
+  The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+    \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+  return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos);   /* read priority grouping field */
+}
+
+
+/** \brief  Enable External Interrupt
+
+    The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/*  NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F));  enable interrupt */
+  NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief  Disable External Interrupt
+
+    The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief  Get Pending Interrupt
+
+    The function reads the pending register in the NVIC and returns the pending bit
+    for the specified interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not pending.
+    \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief  Set Pending Interrupt
+
+    The function sets the pending bit of an external interrupt.
+
+    \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief  Clear Pending Interrupt
+
+    The function clears the pending bit of an external interrupt.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief  Get Active Interrupt
+
+    The function reads the active register in NVIC and returns the active bit.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not active.
+    \return             1  Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+  return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief  Set Interrupt Priority
+
+    The function sets the priority of an interrupt.
+
+    \note The priority cannot be set for every core interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+    \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if(IRQn < 0) {
+    SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M  System Interrupts */
+  else {
+    NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff);    }        /* set Priority for device specific Interrupts  */
+}
+
+
+/** \brief  Get Interrupt Priority
+
+    The function reads the priority of an interrupt. The interrupt
+    number can be positive to specify an external (device specific)
+    interrupt, or negative to specify an internal (core) interrupt.
+
+
+    \param [in]   IRQn  Interrupt number.
+    \return             Interrupt Priority. Value is aligned automatically to the implemented
+                        priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if(IRQn < 0) {
+    return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS)));  } /* get priority for Cortex-M  system interrupts */
+  else {
+    return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)]           >> (8 - __NVIC_PRIO_BITS)));  } /* get priority for device specific interrupts  */
+}
+
+
+/** \brief  Encode Priority
+
+    The function encodes the priority for an interrupt with the given priority group,
+    preemptive priority value, and subpriority value.
+    In case of a conflict between priority grouping and available
+    priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+    \param [in]     PriorityGroup  Used priority group.
+    \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+    \param [in]       SubPriority  Subpriority value (starting from 0).
+    \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & 0x07);          /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+  SubPriorityBits     = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+  return (
+           ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+           ((SubPriority     & ((1 << (SubPriorityBits    )) - 1)))
+         );
+}
+
+
+/** \brief  Decode Priority
+
+    The function decodes an interrupt priority value with a given priority group to
+    preemptive priority value and subpriority value.
+    In case of a conflict between priority grouping and available
+    priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+
+    \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+    \param [in]     PriorityGroup  Used priority group.
+    \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+    \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & 0x07);          /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+  SubPriorityBits     = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+  *pSubPriority     = (Priority                   ) & ((1 << (SubPriorityBits    )) - 1);
+}
+
+
+/** \brief  System Reset
+
+    The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                     /* Ensure all outstanding memory accesses included
+                                                                  buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FA << SCB_AIRCR_VECTKEY_Pos)      |
+                 (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);                   /* Keep priority group unchanged */
+  __DSB();                                                     /* Ensure completion of memory access */
+  while(1);                                                    /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+    \brief      Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief  System Tick Configuration
+
+    The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+    Counter is in free running mode to generate periodic interrupts.
+
+    \param [in]  ticks  Number of ticks between two interrupts.
+
+    \return          0  Function succeeded.
+    \return          1  Function failed.
+
+    \note     When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+    function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+    must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk)  return (1);      /* Reload value impossible */
+
+  SysTick->LOAD  = ticks - 1;                                  /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1);  /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0;                                          /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                    /* Enable SysTick IRQ and SysTick Timer */
+  return (0);                                                  /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_core_DebugFunctions ITM Functions
+    \brief   Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                    /*!< External variable to receive characters.                         */
+#define                 ITM_RXBUFFER_EMPTY    0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief  ITM Send Character
+
+    The function transmits a character via the ITM channel 0, and
+    \li Just returns when no debugger is connected that has booked the output.
+    \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+    \param [in]     ch  Character to transmit.
+
+    \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if ((ITM->TCR & ITM_TCR_ITMENA_Msk)                  &&      /* ITM enabled */
+      (ITM->TER & (1UL << 0)        )                    )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0].u32 == 0);
+    ITM->PORT[0].u8 = (uint8_t) ch;
+  }
+  return (ch);
+}
+
+
+/** \brief  ITM Receive Character
+
+    The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+    \return             Received character.
+    \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/** \brief  ITM Check Character
+
+    The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+    \return          0  No character available.
+    \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+    return (0);                                 /* no character available */
+  } else {
+    return (1);                                 /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Drivers/CMSIS/Include/core_cmFunc.h b/Drivers/CMSIS/Include/core_cmFunc.h
new file mode 100644
index 0000000..01089f1
--- /dev/null
+++ b/Drivers/CMSIS/Include/core_cmFunc.h
@@ -0,0 +1,637 @@
+/**************************************************************************//**
+ * @file     core_cmFunc.h
+ * @brief    CMSIS Cortex-M Core Function Access Header File
+ * @version  V4.00
+ * @date     28. August 2014
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+ */
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+  #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq();     */
+/* intrinsic void __disable_irq();    */
+
+/** \brief  Get Control Register
+
+    This function returns the content of the Control Register.
+
+    \return               Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+  register uint32_t __regControl         __ASM("control");
+  return(__regControl);
+}
+
+
+/** \brief  Set Control Register
+
+    This function writes the given value to the Control Register.
+
+    \param [in]    control  Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+  register uint32_t __regControl         __ASM("control");
+  __regControl = control;
+}
+
+
+/** \brief  Get IPSR Register
+
+    This function returns the content of the IPSR Register.
+
+    \return               IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+  register uint32_t __regIPSR          __ASM("ipsr");
+  return(__regIPSR);
+}
+
+
+/** \brief  Get APSR Register
+
+    This function returns the content of the APSR Register.
+
+    \return               APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+  register uint32_t __regAPSR          __ASM("apsr");
+  return(__regAPSR);
+}
+
+
+/** \brief  Get xPSR Register
+
+    This function returns the content of the xPSR Register.
+
+    \return               xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+  register uint32_t __regXPSR          __ASM("xpsr");
+  return(__regXPSR);
+}
+
+
+/** \brief  Get Process Stack Pointer
+
+    This function returns the current value of the Process Stack Pointer (PSP).
+
+    \return               PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  return(__regProcessStackPointer);
+}
+
+
+/** \brief  Set Process Stack Pointer
+
+    This function assigns the given value to the Process Stack Pointer (PSP).
+
+    \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief  Get Main Stack Pointer
+
+    This function returns the current value of the Main Stack Pointer (MSP).
+
+    \return               MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  return(__regMainStackPointer);
+}
+
+
+/** \brief  Set Main Stack Pointer
+
+    This function assigns the given value to the Main Stack Pointer (MSP).
+
+    \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief  Get Priority Mask
+
+    This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+    \return               Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  return(__regPriMask);
+}
+
+
+/** \brief  Set Priority Mask
+
+    This function assigns the given value to the Priority Mask Register.
+
+    \param [in]    priMask  Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  __regPriMask = (priMask);
+}
+
+
+#if       (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief  Enable FIQ
+
+    This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq                __enable_fiq
+
+
+/** \brief  Disable FIQ
+
+    This function disables FIQ interrupts by setting the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq               __disable_fiq
+
+
+/** \brief  Get Base Priority
+
+    This function returns the current value of the Base Priority register.
+
+    \return               Base Priority register value
+ */
+__STATIC_INLINE uint32_t  __get_BASEPRI(void)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  return(__regBasePri);
+}
+
+
+/** \brief  Set Base Priority
+
+    This function assigns the given value to the Base Priority register.
+
+    \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief  Get Fault Mask
+
+    This function returns the current value of the Fault Mask register.
+
+    \return               Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  return(__regFaultMask);
+}
+
+
+/** \brief  Set Fault Mask
+
+    This function assigns the given value to the Fault Mask register.
+
+    \param [in]    faultMask  Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#if       (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07)
+
+/** \brief  Get FPSCR
+
+    This function returns the current value of the Floating Point Status/Control register.
+
+    \return               Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  register uint32_t __regfpscr         __ASM("fpscr");
+  return(__regfpscr);
+#else
+   return(0);
+#endif
+}
+
+
+/** \brief  Set FPSCR
+
+    This function assigns the given value to the Floating Point Status/Control register.
+
+    \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  register uint32_t __regfpscr         __ASM("fpscr");
+  __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief  Enable IRQ Interrupts
+
+  This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+  Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+  __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief  Disable IRQ Interrupts
+
+  This function disables IRQ interrupts by setting the I-bit in the CPSR.
+  Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+  __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief  Get Control Register
+
+    This function returns the content of the Control Register.
+
+    \return               Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, control" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Control Register
+
+    This function writes the given value to the Control Register.
+
+    \param [in]    control  Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+  __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief  Get IPSR Register
+
+    This function returns the content of the IPSR Register.
+
+    \return               IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Get APSR Register
+
+    This function returns the content of the APSR Register.
+
+    \return               APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Get xPSR Register
+
+    This function returns the content of the xPSR Register.
+
+    \return               xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Get Process Stack Pointer
+
+    This function returns the current value of the Process Stack Pointer (PSP).
+
+    \return               PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+  register uint32_t result;
+
+  __ASM volatile ("MRS %0, psp\n"  : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Process Stack Pointer
+
+    This function assigns the given value to the Process Stack Pointer (PSP).
+
+    \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief  Get Main Stack Pointer
+
+    This function returns the current value of the Main Stack Pointer (MSP).
+
+    \return               MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+  register uint32_t result;
+
+  __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Main Stack Pointer
+
+    This function assigns the given value to the Main Stack Pointer (MSP).
+
+    \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief  Get Priority Mask
+
+    This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+    \return               Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, primask" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Priority Mask
+
+    This function assigns the given value to the Priority Mask Register.
+
+    \param [in]    priMask  Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if       (__CORTEX_M >= 0x03)
+
+/** \brief  Enable FIQ
+
+    This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+  __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief  Disable FIQ
+
+    This function disables FIQ interrupts by setting the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+  __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief  Get Base Priority
+
+    This function returns the current value of the Base Priority register.
+
+    \return               Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Base Priority
+
+    This function assigns the given value to the Base Priority register.
+
+    \param [in]    basePri  Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+  __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief  Get Fault Mask
+
+    This function returns the current value of the Fault Mask register.
+
+    \return               Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Fault Mask
+
+    This function assigns the given value to the Fault Mask register.
+
+    \param [in]    faultMask  Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if       (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07)
+
+/** \brief  Get FPSCR
+
+    This function returns the current value of the Floating Point Status/Control register.
+
+    \return               Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  uint32_t result;
+
+  /* Empty asm statement works as a scheduling barrier */
+  __ASM volatile ("");
+  __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+  __ASM volatile ("");
+  return(result);
+#else
+   return(0);
+#endif
+}
+
+
+/** \brief  Set FPSCR
+
+    This function assigns the given value to the Floating Point Status/Control register.
+
+    \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  /* Empty asm statement works as a scheduling barrier */
+  __ASM volatile ("");
+  __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+  __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include <cmsis_csm.h>
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */
diff --git a/Drivers/CMSIS/Include/core_cmInstr.h b/Drivers/CMSIS/Include/core_cmInstr.h
new file mode 100644
index 0000000..856b4c3
--- /dev/null
+++ b/Drivers/CMSIS/Include/core_cmInstr.h
@@ -0,0 +1,880 @@
+/**************************************************************************//**
+ * @file     core_cmInstr.h
+ * @brief    CMSIS Cortex-M Core Instruction Access Header File
+ * @version  V4.00
+ * @date     28. August 2014
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+  #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief  No Operation
+
+    No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP                             __nop
+
+
+/** \brief  Wait For Interrupt
+
+    Wait For Interrupt is a hint instruction that suspends execution
+    until one of a number of events occurs.
+ */
+#define __WFI                             __wfi
+
+
+/** \brief  Wait For Event
+
+    Wait For Event is a hint instruction that permits the processor to enter
+    a low-power state until one of a number of events occurs.
+ */
+#define __WFE                             __wfe
+
+
+/** \brief  Send Event
+
+    Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV                             __sev
+
+
+/** \brief  Instruction Synchronization Barrier
+
+    Instruction Synchronization Barrier flushes the pipeline in the processor,
+    so that all instructions following the ISB are fetched from cache or
+    memory, after the instruction has been completed.
+ */
+#define __ISB()                           __isb(0xF)
+
+
+/** \brief  Data Synchronization Barrier
+
+    This function acts as a special kind of Data Memory Barrier.
+    It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB()                           __dsb(0xF)
+
+
+/** \brief  Data Memory Barrier
+
+    This function ensures the apparent order of the explicit memory operations before
+    and after the instruction, without ensuring their completion.
+ */
+#define __DMB()                           __dmb(0xF)
+
+
+/** \brief  Reverse byte order (32 bit)
+
+    This function reverses the byte order in integer value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#define __REV                             __rev
+
+
+/** \brief  Reverse byte order (16 bit)
+
+    This function reverses the byte order in two unsigned short values.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+  rev16 r0, r0
+  bx lr
+}
+#endif
+
+/** \brief  Reverse byte order in signed short value
+
+    This function reverses the byte order in a signed short value with sign extension to integer.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+  revsh r0, r0
+  bx lr
+}
+#endif
+
+
+/** \brief  Rotate Right in unsigned value (32 bit)
+
+    This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+    \param [in]    value  Value to rotate
+    \param [in]    value  Number of Bits to rotate
+    \return               Rotated value
+ */
+#define __ROR                             __ror
+
+
+/** \brief  Breakpoint
+
+    This function causes the processor to enter Debug state.
+    Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+    \param [in]    value  is ignored by the processor.
+                   If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __breakpoint(value)
+
+
+#if       (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief  Reverse bit order of value
+
+    This function reverses the bit order of the given value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#define __RBIT                            __rbit
+
+
+/** \brief  LDR Exclusive (8 bit)
+
+    This function executes a exclusive LDR instruction for 8 bit value.
+
+    \param [in]    ptr  Pointer to data
+    \return             value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr)                     ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief  LDR Exclusive (16 bit)
+
+    This function executes a exclusive LDR instruction for 16 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr)                     ((uint16_t) __ldrex(ptr))
+
+
+/** \brief  LDR Exclusive (32 bit)
+
+    This function executes a exclusive LDR instruction for 32 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr)                     ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief  STR Exclusive (8 bit)
+
+    This function executes a exclusive STR instruction for 8 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+#define __STREXB(value, ptr)              __strex(value, ptr)
+
+
+/** \brief  STR Exclusive (16 bit)
+
+    This function executes a exclusive STR instruction for 16 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+#define __STREXH(value, ptr)              __strex(value, ptr)
+
+
+/** \brief  STR Exclusive (32 bit)
+
+    This function executes a exclusive STR instruction for 32 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+#define __STREXW(value, ptr)              __strex(value, ptr)
+
+
+/** \brief  Remove the exclusive lock
+
+    This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX                           __clrex
+
+
+/** \brief  Signed Saturate
+
+    This function saturates a signed value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (1..32)
+    \return             Saturated value
+ */
+#define __SSAT                            __ssat
+
+
+/** \brief  Unsigned Saturate
+
+    This function saturates an unsigned value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (0..31)
+    \return             Saturated value
+ */
+#define __USAT                            __usat
+
+
+/** \brief  Count leading zeros
+
+    This function counts the number of leading zeros of a data value.
+
+    \param [in]  value  Value to count the leading zeros
+    \return             number of leading zeros in value
+ */
+#define __CLZ                             __clz
+
+
+/** \brief  Rotate Right with Extend (32 bit)
+
+    This function moves each bit of a bitstring right by one bit. The carry input is shifted in at the left end of the bitstring.
+
+    \param [in]    value  Value to rotate
+    \return               Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+  rrx r0, r0
+  bx lr
+}
+#endif
+
+
+/** \brief  LDRT Unprivileged (8 bit)
+
+    This function executes a Unprivileged LDRT instruction for 8 bit value.
+
+    \param [in]    ptr  Pointer to data
+    \return             value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr)                      ((uint8_t )  __ldrt(ptr))
+
+
+/** \brief  LDRT Unprivileged (16 bit)
+
+    This function executes a Unprivileged LDRT instruction for 16 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr)                      ((uint16_t)  __ldrt(ptr))
+
+
+/** \brief  LDRT Unprivileged (32 bit)
+
+    This function executes a Unprivileged LDRT instruction for 32 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr)                       ((uint32_t ) __ldrt(ptr))
+
+
+/** \brief  STRT Unprivileged (8 bit)
+
+    This function executes a Unprivileged STRT instruction for 8 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+ */
+#define __STRBT(value, ptr)               __strt(value, ptr)
+
+
+/** \brief  STRT Unprivileged (16 bit)
+
+    This function executes a Unprivileged STRT instruction for 16 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+ */
+#define __STRHT(value, ptr)               __strt(value, ptr)
+
+
+/** \brief  STRT Unprivileged (32 bit)
+
+    This function executes a Unprivileged STRT instruction for 32 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+ */
+#define __STRT(value, ptr)                __strt(value, ptr)
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief  No Operation
+
+    No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+  __ASM volatile ("nop");
+}
+
+
+/** \brief  Wait For Interrupt
+
+    Wait For Interrupt is a hint instruction that suspends execution
+    until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+  __ASM volatile ("wfi");
+}
+
+
+/** \brief  Wait For Event
+
+    Wait For Event is a hint instruction that permits the processor to enter
+    a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+  __ASM volatile ("wfe");
+}
+
+
+/** \brief  Send Event
+
+    Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+  __ASM volatile ("sev");
+}
+
+
+/** \brief  Instruction Synchronization Barrier
+
+    Instruction Synchronization Barrier flushes the pipeline in the processor,
+    so that all instructions following the ISB are fetched from cache or
+    memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+  __ASM volatile ("isb");
+}
+
+
+/** \brief  Data Synchronization Barrier
+
+    This function acts as a special kind of Data Memory Barrier.
+    It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+  __ASM volatile ("dsb");
+}
+
+
+/** \brief  Data Memory Barrier
+
+    This function ensures the apparent order of the explicit memory operations before
+    and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+  __ASM volatile ("dmb");
+}
+
+
+/** \brief  Reverse byte order (32 bit)
+
+    This function reverses the byte order in integer value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+  return __builtin_bswap32(value);
+#else
+  uint32_t result;
+
+  __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+#endif
+}
+
+
+/** \brief  Reverse byte order (16 bit)
+
+    This function reverses the byte order in two unsigned short values.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+  uint32_t result;
+
+  __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+}
+
+
+/** \brief  Reverse byte order in signed short value
+
+    This function reverses the byte order in a signed short value with sign extension to integer.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+  return (short)__builtin_bswap16(value);
+#else
+  uint32_t result;
+
+  __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+#endif
+}
+
+
+/** \brief  Rotate Right in unsigned value (32 bit)
+
+    This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+    \param [in]    value  Value to rotate
+    \param [in]    value  Number of Bits to rotate
+    \return               Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+  return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief  Breakpoint
+
+    This function causes the processor to enter Debug state.
+    Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+    \param [in]    value  is ignored by the processor.
+                   If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __ASM volatile ("bkpt "#value)
+
+
+#if       (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief  Reverse bit order of value
+
+    This function reverses the bit order of the given value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+  uint32_t result;
+
+   __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+   return(result);
+}
+
+
+/** \brief  LDR Exclusive (8 bit)
+
+    This function executes a exclusive LDR instruction for 8 bit value.
+
+    \param [in]    ptr  Pointer to data
+    \return             value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return ((uint8_t) result);    /* Add explicit type cast here */
+}
+
+
+/** \brief  LDR Exclusive (16 bit)
+
+    This function executes a exclusive LDR instruction for 16 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return ((uint16_t) result);    /* Add explicit type cast here */
+}
+
+
+/** \brief  LDR Exclusive (32 bit)
+
+    This function executes a exclusive LDR instruction for 32 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+   return(result);
+}
+
+
+/** \brief  STR Exclusive (8 bit)
+
+    This function executes a exclusive STR instruction for 8 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+   return(result);
+}
+
+
+/** \brief  STR Exclusive (16 bit)
+
+    This function executes a exclusive STR instruction for 16 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+   return(result);
+}
+
+
+/** \brief  STR Exclusive (32 bit)
+
+    This function executes a exclusive STR instruction for 32 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+   return(result);
+}
+
+
+/** \brief  Remove the exclusive lock
+
+    This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+  __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief  Signed Saturate
+
+    This function saturates a signed value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (1..32)
+    \return             Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("ssat %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+
+/** \brief  Unsigned Saturate
+
+    This function saturates an unsigned value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (0..31)
+    \return             Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("usat %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+
+/** \brief  Count leading zeros
+
+    This function counts the number of leading zeros of a data value.
+
+    \param [in]  value  Value to count the leading zeros
+    \return             number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+  uint32_t result;
+
+  __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+   return ((uint8_t) result);    /* Add explicit type cast here */
+}
+
+
+/** \brief  Rotate Right with Extend (32 bit)
+
+    This function moves each bit of a bitstring right by one bit. The carry input is shifted in at the left end of the bitstring.
+
+    \param [in]    value  Value to rotate
+    \return               Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+  uint32_t result;
+
+  __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+}
+
+
+/** \brief  LDRT Unprivileged (8 bit)
+
+    This function executes a Unprivileged LDRT instruction for 8 bit value.
+
+    \param [in]    ptr  Pointer to data
+    \return             value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return ((uint8_t) result);    /* Add explicit type cast here */
+}
+
+
+/** \brief  LDRT Unprivileged (16 bit)
+
+    This function executes a Unprivileged LDRT instruction for 16 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return ((uint16_t) result);    /* Add explicit type cast here */
+}
+
+
+/** \brief  LDRT Unprivileged (32 bit)
+
+    This function executes a Unprivileged LDRT instruction for 32 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) );
+   return(result);
+}
+
+
+/** \brief  STRT Unprivileged (8 bit)
+
+    This function executes a Unprivileged STRT instruction for 8 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr)
+{
+   __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/** \brief  STRT Unprivileged (16 bit)
+
+    This function executes a Unprivileged STRT instruction for 16 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr)
+{
+   __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/** \brief  STRT Unprivileged (32 bit)
+
+    This function executes a Unprivileged STRT instruction for 32 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr)
+{
+   __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) );
+}
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include <cmsis_csm.h>
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
diff --git a/Drivers/CMSIS/Include/core_cmSimd.h b/Drivers/CMSIS/Include/core_cmSimd.h
new file mode 100644
index 0000000..ee58eee
--- /dev/null
+++ b/Drivers/CMSIS/Include/core_cmSimd.h
@@ -0,0 +1,697 @@
+/**************************************************************************//**
+ * @file     core_cmSimd.h
+ * @brief    CMSIS Cortex-M SIMD Header File
+ * @version  V4.00
+ * @date     22. August 2014
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CMSIMD_H
+#define __CORE_CMSIMD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+  Access to dedicated SIMD instructions
+  @{
+*/
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+#define __SADD8                           __sadd8
+#define __QADD8                           __qadd8
+#define __SHADD8                          __shadd8
+#define __UADD8                           __uadd8
+#define __UQADD8                          __uqadd8
+#define __UHADD8                          __uhadd8
+#define __SSUB8                           __ssub8
+#define __QSUB8                           __qsub8
+#define __SHSUB8                          __shsub8
+#define __USUB8                           __usub8
+#define __UQSUB8                          __uqsub8
+#define __UHSUB8                          __uhsub8
+#define __SADD16                          __sadd16
+#define __QADD16                          __qadd16
+#define __SHADD16                         __shadd16
+#define __UADD16                          __uadd16
+#define __UQADD16                         __uqadd16
+#define __UHADD16                         __uhadd16
+#define __SSUB16                          __ssub16
+#define __QSUB16                          __qsub16
+#define __SHSUB16                         __shsub16
+#define __USUB16                          __usub16
+#define __UQSUB16                         __uqsub16
+#define __UHSUB16                         __uhsub16
+#define __SASX                            __sasx
+#define __QASX                            __qasx
+#define __SHASX                           __shasx
+#define __UASX                            __uasx
+#define __UQASX                           __uqasx
+#define __UHASX                           __uhasx
+#define __SSAX                            __ssax
+#define __QSAX                            __qsax
+#define __SHSAX                           __shsax
+#define __USAX                            __usax
+#define __UQSAX                           __uqsax
+#define __UHSAX                           __uhsax
+#define __USAD8                           __usad8
+#define __USADA8                          __usada8
+#define __SSAT16                          __ssat16
+#define __USAT16                          __usat16
+#define __UXTB16                          __uxtb16
+#define __UXTAB16                         __uxtab16
+#define __SXTB16                          __sxtb16
+#define __SXTAB16                         __sxtab16
+#define __SMUAD                           __smuad
+#define __SMUADX                          __smuadx
+#define __SMLAD                           __smlad
+#define __SMLADX                          __smladx
+#define __SMLALD                          __smlald
+#define __SMLALDX                         __smlaldx
+#define __SMUSD                           __smusd
+#define __SMUSDX                          __smusdx
+#define __SMLSD                           __smlsd
+#define __SMLSDX                          __smlsdx
+#define __SMLSLD                          __smlsld
+#define __SMLSLDX                         __smlsldx
+#define __SEL                             __sel
+#define __QADD                            __qadd
+#define __QSUB                            __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0x0000FFFFUL) |  \
+                                           ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL)  )
+
+#define __PKHTB(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0xFFFF0000UL) |  \
+                                           ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL)  )
+
+#define __SMMLA(ARG1,ARG2,ARG3)          ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+                                                      ((int64_t)(ARG3) << 32)      ) >> 32))
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("usat16 %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+  uint32_t result;
+
+  __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+  uint32_t result;
+
+  __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   // Little endian
+  __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               // Big endian
+  __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   // Little endian
+  __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               // Big endian
+  __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   // Little endian
+  __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               // Big endian
+  __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   // Little endian
+  __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               // Big endian
+  __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+  __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2), "I" (ARG3)  ); \
+  __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+  if (ARG3 == 0) \
+    __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2)  ); \
+  else \
+    __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2), "I" (ARG3)  ); \
+  __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r"  (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/* not yet supported */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include <cmsis_csm.h>
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CMSIMD_H */
diff --git a/Drivers/Makefile b/Drivers/Makefile
new file mode 100644
index 0000000..376eac0
--- /dev/null
+++ b/Drivers/Makefile
@@ -0,0 +1,64 @@
+CC=arm-none-eabi-gcc
+AR=arm-none-eabi-ar
+
+###########################################
+
+vpath %.c STM32F4xx_HAL_Driver/Src
+
+# Default STDPERIPH_SETTINGS to settings suitable for  STM32F429BIT6 (dev-bridge rev01)
+STDPERIPH_SETTINGS ?= -DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F429xx
+
+CFLAGS  = -ggdb -O2 -Wall -Wextra -Warray-bounds
+CFLAGS += -mcpu=cortex-m4 -mthumb -mlittle-endian -mthumb-interwork
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+CFLAGS += $(STDPERIPH_SETTINGS)
+CFLAGS += -ICMSIS/Include -ICMSIS/Device/ST/STM32F4xx/Include -ISTM32F4xx_HAL_Driver/Inc
+
+SRCS = stm32f4xx_hal.c           stm32f4xx_hal_msp_template.c \
+ stm32f4xx_hal_adc.c       stm32f4xx_hal_nand.c \
+ stm32f4xx_hal_adc_ex.c    stm32f4xx_hal_nor.c \
+ stm32f4xx_hal_can.c       stm32f4xx_hal_pccard.c \
+ stm32f4xx_hal_cortex.c    stm32f4xx_hal_pcd.c \
+ stm32f4xx_hal_crc.c stm32f4xx_hal_pwr.c \
+ stm32f4xx_hal_cryp.c      stm32f4xx_hal_pwr_ex.c \
+ stm32f4xx_hal_cryp_ex.c   stm32f4xx_hal_rcc.c \
+ stm32f4xx_hal_dac.c       stm32f4xx_hal_rcc_ex.c \
+ stm32f4xx_hal_dac_ex.c    stm32f4xx_hal_rng.c \
+ stm32f4xx_hal_dcmi.c      stm32f4xx_hal_rtc.c \
+ stm32f4xx_hal_dma.c       stm32f4xx_hal_rtc_ex.c \
+ stm32f4xx_hal_dma2d.c     stm32f4xx_hal_sai.c \
+ stm32f4xx_hal_dma_ex.c    stm32f4xx_hal_sd.c \
+ stm32f4xx_hal_eth.c       stm32f4xx_hal_sdram.c \
+ stm32f4xx_hal_flash.c     stm32f4xx_hal_smartcard.c \
+ stm32f4xx_hal_flash_ex.c  stm32f4xx_hal_spi.c \
+ stm32f4xx_hal_gpio.c      stm32f4xx_hal_sram.c \
+ stm32f4xx_hal_hash.c      stm32f4xx_hal_tim.c \
+ stm32f4xx_hal_hash_ex.c   stm32f4xx_hal_tim_ex.c \
+ stm32f4xx_hal_hcd.c       stm32f4xx_hal_uart.c \
+ stm32f4xx_hal_i2c.c       stm32f4xx_hal_usart.c \
+ stm32f4xx_hal_i2c_ex.c    stm32f4xx_hal_wwdg.c \
+ stm32f4xx_hal_i2s.c       stm32f4xx_ll_fmc.c \
+ stm32f4xx_hal_i2s_ex.c    stm32f4xx_ll_fsmc.c \
+ stm32f4xx_hal_irda.c      stm32f4xx_ll_sdmmc.c \
+ stm32f4xx_hal_iwdg.c      stm32f4xx_ll_usb.c \
+ stm32f4xx_hal_ltdc.c \
+ stm32f4xx_hal_cec.c       stm32f4xx_hal_dcmi_ex.c \
+ stm32f4xx_hal_fmpi2c.c    stm32f4xx_hal_fmpi2c_ex.c \
+ stm32f4xx_hal_qspi.c      stm32f4xx_hal_sai_ex.c \
+ stm32f4xx_hal_spdifrx.c
+
+
+OBJS = $(SRCS:.c=.o)
+
+.PHONY: libstmf4.a
+
+all: libstmf4.a
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c -o $@ $^
+
+libstmf4.a: $(OBJS)
+	$(AR) -r $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) libstmf4.a
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
new file mode 100644
index 0000000..f7f21f2
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
@@ -0,0 +1,2510 @@
+/**
+  ******************************************************************************
+  * @file    stm32_hal_legacy.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   This file contains aliases definition for the STM32Cube HAL constants 
+  *          macros and functions maintained for legacy purpose.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_HAL_LEGACY
+#define __STM32_HAL_LEGACY
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define AES_FLAG_RDERR                  CRYP_FLAG_RDERR
+#define AES_FLAG_WRERR                  CRYP_FLAG_WRERR
+#define AES_CLEARFLAG_CCF               CRYP_CLEARFLAG_CCF
+#define AES_CLEARFLAG_RDERR             CRYP_CLEARFLAG_RDERR
+#define AES_CLEARFLAG_WRERR             CRYP_CLEARFLAG_WRERR
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define ADC_RESOLUTION12b               ADC_RESOLUTION_12B
+#define ADC_RESOLUTION10b               ADC_RESOLUTION_10B
+#define ADC_RESOLUTION8b                ADC_RESOLUTION_8B
+#define ADC_RESOLUTION6b                ADC_RESOLUTION_6B
+#define OVR_DATA_OVERWRITTEN            ADC_OVR_DATA_OVERWRITTEN
+#define OVR_DATA_PRESERVED              ADC_OVR_DATA_PRESERVED
+#define EOC_SINGLE_CONV                 ADC_EOC_SINGLE_CONV
+#define EOC_SEQ_CONV                    ADC_EOC_SEQ_CONV
+#define EOC_SINGLE_SEQ_CONV             ADC_EOC_SINGLE_SEQ_CONV
+#define REGULAR_GROUP                   ADC_REGULAR_GROUP
+#define INJECTED_GROUP                  ADC_INJECTED_GROUP
+#define REGULAR_INJECTED_GROUP          ADC_REGULAR_INJECTED_GROUP
+#define AWD_EVENT                       ADC_AWD_EVENT
+#define AWD1_EVENT                      ADC_AWD1_EVENT
+#define AWD2_EVENT                      ADC_AWD2_EVENT
+#define AWD3_EVENT                      ADC_AWD3_EVENT
+#define OVR_EVENT                       ADC_OVR_EVENT
+#define JQOVF_EVENT                     ADC_JQOVF_EVENT
+#define ALL_CHANNELS                    ADC_ALL_CHANNELS
+#define REGULAR_CHANNELS                ADC_REGULAR_CHANNELS
+#define INJECTED_CHANNELS               ADC_INJECTED_CHANNELS
+#define SYSCFG_FLAG_SENSOR_ADC          ADC_FLAG_SENSOR
+#define SYSCFG_FLAG_VREF_ADC            ADC_FLAG_VREFINT
+#define ADC_EXTERNALTRIG0_T6_TRGO       ADC_EXTERNALTRIGCONV_T6_TRGO 
+#define ADC_EXTERNALTRIG1_T21_CC2       ADC_EXTERNALTRIGCONV_T21_CC2 
+#define ADC_EXTERNALTRIG2_T2_TRGO       ADC_EXTERNALTRIGCONV_T2_TRGO 
+#define ADC_EXTERNALTRIG3_T2_CC4        ADC_EXTERNALTRIGCONV_T2_CC4  
+#define ADC_EXTERNALTRIG4_T22_TRGO      ADC_EXTERNALTRIGCONV_T22_TRGO
+#define ADC_EXTERNALTRIG7_EXT_IT11      ADC_EXTERNALTRIGCONV_EXT_IT11
+#define ADC_CLOCK_ASYNC                 ADC_CLOCK_ASYNC_DIV1
+#define ADC_EXTERNALTRIG_EDGE_NONE      ADC_EXTERNALTRIGCONVEDGE_NONE
+#define ADC_EXTERNALTRIG_EDGE_RISING    ADC_EXTERNALTRIGCONVEDGE_RISING
+#define ADC_EXTERNALTRIG_EDGE_FALLING   ADC_EXTERNALTRIGCONVEDGE_FALLING
+#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING 
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
+  * @{
+  */ 
+  
+#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG 
+
+/**
+  * @}
+  */   
+   
+/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+#define COMP_WINDOWMODE_DISABLED    COMP_WINDOWMODE_DISABLE
+#define COMP_WINDOWMODE_ENABLED     COMP_WINDOWMODE_ENABLE
+#define COMP_EXTI_LINE_COMP1_EVENT  COMP_EXTI_LINE_COMP1
+#define COMP_EXTI_LINE_COMP2_EVENT  COMP_EXTI_LINE_COMP2
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+#define CRC_OUTPUTDATA_INVERSION_DISABLED    CRC_OUTPUTDATA_INVERSION_DISABLE
+#define CRC_OUTPUTDATA_INVERSION_ENABLED     CRC_OUTPUTDATA_INVERSION_ENABLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define DAC1_CHANNEL_1                                  DAC_CHANNEL_1
+#define DAC1_CHANNEL_2                                  DAC_CHANNEL_2
+#define DAC2_CHANNEL_1                                  DAC_CHANNEL_1
+#define DAC_WAVE_NONE                                   ((uint32_t)0x00000000)
+#define DAC_WAVE_NOISE                                  ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVE_TRIANGLE                               ((uint32_t)DAC_CR_WAVE1_1)                           
+#define DAC_WAVEGENERATION_NONE                         DAC_WAVE_NONE
+#define DAC_WAVEGENERATION_NOISE                        DAC_WAVE_NOISE
+#define DAC_WAVEGENERATION_TRIANGLE                     DAC_WAVE_TRIANGLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define HAL_REMAPDMA_ADC_DMA_CH2                DMA_REMAP_ADC_DMA_CH2       
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4          DMA_REMAP_USART1_TX_DMA_CH4 
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5          DMA_REMAP_USART1_RX_DMA_CH5   
+#define HAL_REMAPDMA_TIM16_DMA_CH4              DMA_REMAP_TIM16_DMA_CH4       
+#define HAL_REMAPDMA_TIM17_DMA_CH2              DMA_REMAP_TIM17_DMA_CH2       
+#define HAL_REMAPDMA_USART3_DMA_CH32            DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_TIM16_DMA_CH6              DMA_REMAP_TIM16_DMA_CH6
+#define HAL_REMAPDMA_TIM17_DMA_CH7              DMA_REMAP_TIM17_DMA_CH7      
+#define HAL_REMAPDMA_SPI2_DMA_CH67              DMA_REMAP_SPI2_DMA_CH67  
+#define HAL_REMAPDMA_USART2_DMA_CH67            DMA_REMAP_USART2_DMA_CH67 
+#define HAL_REMAPDMA_USART3_DMA_CH32            DMA_REMAP_USART3_DMA_CH32  
+#define HAL_REMAPDMA_I2C1_DMA_CH76              DMA_REMAP_I2C1_DMA_CH76   
+#define HAL_REMAPDMA_TIM1_DMA_CH6               DMA_REMAP_TIM1_DMA_CH6     
+#define HAL_REMAPDMA_TIM2_DMA_CH7               DMA_REMAP_TIM2_DMA_CH7      
+#define HAL_REMAPDMA_TIM3_DMA_CH6               DMA_REMAP_TIM3_DMA_CH6    
+  
+#define IS_HAL_REMAPDMA                          IS_DMA_REMAP  
+#define __HAL_REMAPDMA_CHANNEL_ENABLE            __HAL_DMA_REMAP_CHANNEL_ENABLE
+#define __HAL_REMAPDMA_CHANNEL_DISABLE           __HAL_DMA_REMAP_CHANNEL_DISABLE
+  
+  
+  
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+#define TYPEPROGRAM_BYTE              FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_HALFWORD          FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_WORD              FLASH_TYPEPROGRAM_WORD
+#define TYPEPROGRAM_DOUBLEWORD        FLASH_TYPEPROGRAM_DOUBLEWORD
+#define TYPEERASE_SECTORS             FLASH_TYPEERASE_SECTORS
+#define TYPEERASE_PAGES               FLASH_TYPEERASE_PAGES
+#define TYPEERASE_PAGEERASE           FLASH_TYPEERASE_PAGES
+#define TYPEERASE_MASSERASE           FLASH_TYPEERASE_MASSERASE
+#define WRPSTATE_DISABLE              OB_WRPSTATE_DISABLE
+#define WRPSTATE_ENABLE               OB_WRPSTATE_ENABLE
+#define HAL_FLASH_TIMEOUT_VALUE       FLASH_TIMEOUT_VALUE
+#define OBEX_PCROP                    OPTIONBYTE_PCROP
+#define OBEX_BOOTCONFIG               OPTIONBYTE_BOOTCONFIG
+#define PCROPSTATE_DISABLE            OB_PCROP_STATE_DISABLE
+#define PCROPSTATE_ENABLE             OB_PCROP_STATE_ENABLE
+#define TYPEERASEDATA_BYTE            FLASH_TYPEERASEDATA_BYTE
+#define TYPEERASEDATA_HALFWORD        FLASH_TYPEERASEDATA_HALFWORD
+#define TYPEERASEDATA_WORD            FLASH_TYPEERASEDATA_WORD
+#define TYPEPROGRAMDATA_BYTE          FLASH_TYPEPROGRAMDATA_BYTE
+#define TYPEPROGRAMDATA_HALFWORD      FLASH_TYPEPROGRAMDATA_HALFWORD
+#define TYPEPROGRAMDATA_WORD          FLASH_TYPEPROGRAMDATA_WORD
+#define TYPEPROGRAMDATA_FASTBYTE      FLASH_TYPEPROGRAMDATA_FASTBYTE
+#define TYPEPROGRAMDATA_FASTHALFWORD  FLASH_TYPEPROGRAMDATA_FASTHALFWORD
+#define TYPEPROGRAMDATA_FASTWORD      FLASH_TYPEPROGRAMDATA_FASTWORD
+#define PAGESIZE                      FLASH_PAGE_SIZE
+#define TYPEPROGRAM_FASTBYTE          FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_FASTHALFWORD      FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_FASTWORD          FLASH_TYPEPROGRAM_WORD
+#define VOLTAGE_RANGE_1               FLASH_VOLTAGE_RANGE_1
+#define VOLTAGE_RANGE_2               FLASH_VOLTAGE_RANGE_2
+#define VOLTAGE_RANGE_3               FLASH_VOLTAGE_RANGE_3
+#define VOLTAGE_RANGE_4               FLASH_VOLTAGE_RANGE_4
+#define TYPEPROGRAM_FAST              FLASH_TYPEPROGRAM_FAST
+#define TYPEPROGRAM_FAST_AND_LAST     FLASH_TYPEPROGRAM_FAST_AND_LAST
+#define WRPAREA_BANK1_AREAA           OB_WRPAREA_BANK1_AREAA
+#define WRPAREA_BANK1_AREAB           OB_WRPAREA_BANK1_AREAB
+#define WRPAREA_BANK2_AREAA           OB_WRPAREA_BANK2_AREAA
+#define WRPAREA_BANK2_AREAB           OB_WRPAREA_BANK2_AREAB
+#define IWDG_STDBY_FREEZE             OB_IWDG_STDBY_FREEZE
+#define IWDG_STDBY_ACTIVE             OB_IWDG_STDBY_RUN
+#define IWDG_STOP_FREEZE              OB_IWDG_STOP_FREEZE
+#define IWDG_STOP_ACTIVE              OB_IWDG_STOP_RUN
+#define FLASH_ERROR_NONE              HAL_FLASH_ERROR_NONE
+#define FLASH_ERROR_RD                HAL_FLASH_ERROR_RD
+#define FLASH_ERROR_PG                HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_PGP               HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_WRP               HAL_FLASH_ERROR_WRP
+#define FLASH_ERROR_OPTV              HAL_FLASH_ERROR_OPTV
+#define FLASH_ERROR_OPTVUSR           HAL_FLASH_ERROR_OPTVUSR
+#define FLASH_ERROR_PROG              HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_OP                HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_PGA               HAL_FLASH_ERROR_PGA
+#define FLASH_ERROR_SIZE              HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_SIZ               HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_PGS               HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_MIS               HAL_FLASH_ERROR_MIS
+#define FLASH_ERROR_FAST              HAL_FLASH_ERROR_FAST
+#define FLASH_ERROR_FWWERR            HAL_FLASH_ERROR_FWWERR
+#define FLASH_ERROR_NOTZERO           HAL_FLASH_ERROR_NOTZERO
+#define FLASH_ERROR_OPERATION         HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_ERS               HAL_FLASH_ERROR_ERS
+#define OB_WDG_SW                     OB_IWDG_SW
+#define OB_WDG_HW                     OB_IWDG_HW
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+#define SYSCFG_FASTMODEPLUS_I2C_PB6    I2C_FASTMODEPLUS_PB6
+#define SYSCFG_FASTMODEPLUS_I2C_PB7    I2C_FASTMODEPLUS_PB7
+#define SYSCFG_FASTMODEPLUS_I2C_PB8    I2C_FASTMODEPLUS_PB8
+#define SYSCFG_FASTMODEPLUS_I2C_PB9    I2C_FASTMODEPLUS_PB9
+#define SYSCFG_FASTMODEPLUS_I2C1       I2C_FASTMODEPLUS_I2C1
+#define SYSCFG_FASTMODEPLUS_I2C2       I2C_FASTMODEPLUS_I2C2
+#define SYSCFG_FASTMODEPLUS_I2C3       I2C_FASTMODEPLUS_I2C3
+
+/**
+  * @}
+  */
+  
+
+/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
+  * @{
+  */
+#if defined(STM32L4) || defined(STM32F7)
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE       FMC_NAND_WAIT_FEATURE_DISABLE
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE        FMC_NAND_WAIT_FEATURE_ENABLE
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8            FMC_NAND_MEM_BUS_WIDTH_8
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16           FMC_NAND_MEM_BUS_WIDTH_16
+#else
+#define FMC_NAND_WAIT_FEATURE_DISABLE           FMC_NAND_PCC_WAIT_FEATURE_DISABLE
+#define FMC_NAND_WAIT_FEATURE_ENABLE            FMC_NAND_PCC_WAIT_FEATURE_ENABLE
+#define FMC_NAND_MEM_BUS_WIDTH_8                FMC_NAND_PCC_MEM_BUS_WIDTH_8
+#define FMC_NAND_MEM_BUS_WIDTH_16               FMC_NAND_PCC_MEM_BUS_WIDTH_16
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+#define FSMC_NORSRAM_TYPEDEF                      FSMC_NORSRAM_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TYPEDEF             FSMC_NORSRAM_EXTENDED_TypeDef
+/**
+  * @}
+  */
+
+/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define GET_GPIO_SOURCE                           GPIO_GET_INDEX
+#define GET_GPIO_INDEX                            GPIO_GET_INDEX
+
+#if defined(STM32F4)
+#define GPIO_AF12_SDMMC                           GPIO_AF12_SDIO
+#define GPIO_AF12_SDMMC1                          GPIO_AF12_SDIO
+#endif
+
+#if defined(STM32F7)
+#define GPIO_AF12_SDIO                            GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC                           GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32L4)
+#define GPIO_AF12_SDIO                            GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC                           GPIO_AF12_SDMMC1
+#endif
+
+#define GPIO_AF0_LPTIM                            GPIO_AF0_LPTIM1
+#define GPIO_AF1_LPTIM                            GPIO_AF1_LPTIM1
+#define GPIO_AF2_LPTIM                            GPIO_AF2_LPTIM1
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED           HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68     HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79     HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
+/**
+  * @}
+  */
+
+/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define I2C_DUALADDRESS_DISABLED                I2C_DUALADDRESS_DISABLE
+#define I2C_DUALADDRESS_ENABLED                 I2C_DUALADDRESS_ENABLE
+#define I2C_GENERALCALL_DISABLED                I2C_GENERALCALL_DISABLE
+#define I2C_GENERALCALL_ENABLED                 I2C_GENERALCALL_ENABLE
+#define I2C_NOSTRETCH_DISABLED                  I2C_NOSTRETCH_DISABLE
+#define I2C_NOSTRETCH_ENABLED                   I2C_NOSTRETCH_ENABLE
+#define I2C_ANALOGFILTER_ENABLED                I2C_ANALOGFILTER_ENABLE
+#define I2C_ANALOGFILTER_DISABLED               I2C_ANALOGFILTER_DISABLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED            IRDA_ONE_BIT_SAMPLE_DISABLE
+#define IRDA_ONE_BIT_SAMPLE_ENABLED             IRDA_ONE_BIT_SAMPLE_ENABLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define KR_KEY_RELOAD                   IWDG_KEY_RELOAD
+#define KR_KEY_ENABLE                   IWDG_KEY_ENABLE
+#define KR_KEY_EWA                      IWDG_KEY_WRITE_ACCESS_ENABLE
+#define KR_KEY_DWA                      IWDG_KEY_WRITE_ACCESS_DISABLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS     LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS     LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS     LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
+
+#define LPTIM_CLOCKPOLARITY_RISINGEDGE          LPTIM_CLOCKPOLARITY_RISING
+#define LPTIM_CLOCKPOLARITY_FALLINGEDGE         LPTIM_CLOCKPOLARITY_FALLING
+#define LPTIM_CLOCKPOLARITY_BOTHEDGES           LPTIM_CLOCKPOLARITY_RISING_FALLING
+
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION  LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS      LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS      LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS      LPTIM_TRIGSAMPLETIME_8TRANSITIONS        
+
+/* The following 3 definition have also been present in a temporary version of lptim.h */
+/* They need to be renamed also to the right name, just in case */
+#define LPTIM_TRIGSAMPLETIME_2TRANSITION        LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSITION        LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSITION        LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define NAND_AddressTypedef             NAND_AddressTypeDef
+
+#define __ARRAY_ADDRESS                 ARRAY_ADDRESS
+#define __ADDR_1st_CYCLE                ADDR_1ST_CYCLE
+#define __ADDR_2nd_CYCLE                ADDR_2ND_CYCLE
+#define __ADDR_3rd_CYCLE                ADDR_3RD_CYCLE
+#define __ADDR_4th_CYCLE                ADDR_4TH_CYCLE
+/**
+  * @}
+  */
+   
+/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define NOR_StatusTypedef              HAL_NOR_StatusTypeDef
+#define NOR_SUCCESS                    HAL_NOR_STATUS_SUCCESS
+#define NOR_ONGOING                    HAL_NOR_STATUS_ONGOING
+#define NOR_ERROR                      HAL_NOR_STATUS_ERROR
+#define NOR_TIMEOUT                    HAL_NOR_STATUS_TIMEOUT
+
+#define __NOR_WRITE                    NOR_WRITE
+#define __NOR_ADDR_SHIFT               NOR_ADDR_SHIFT
+/**
+  * @}
+  */
+
+/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define OPAMP_NONINVERTINGINPUT_VP0           OPAMP_NONINVERTINGINPUT_IO0
+#define OPAMP_NONINVERTINGINPUT_VP1           OPAMP_NONINVERTINGINPUT_IO1
+#define OPAMP_NONINVERTINGINPUT_VP2           OPAMP_NONINVERTINGINPUT_IO2
+#define OPAMP_NONINVERTINGINPUT_VP3           OPAMP_NONINVERTINGINPUT_IO3
+                                              
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0       OPAMP_SEC_NONINVERTINGINPUT_IO0
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1       OPAMP_SEC_NONINVERTINGINPUT_IO1
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2       OPAMP_SEC_NONINVERTINGINPUT_IO2
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3       OPAMP_SEC_NONINVERTINGINPUT_IO3   
+
+#define OPAMP_INVERTINGINPUT_VM0              OPAMP_INVERTINGINPUT_IO0
+#define OPAMP_INVERTINGINPUT_VM1              OPAMP_INVERTINGINPUT_IO1
+
+#define IOPAMP_INVERTINGINPUT_VM0             OPAMP_INVERTINGINPUT_IO0
+#define IOPAMP_INVERTINGINPUT_VM1             OPAMP_INVERTINGINPUT_IO1
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0          OPAMP_SEC_INVERTINGINPUT_IO0
+#define OPAMP_SEC_INVERTINGINPUT_VM1          OPAMP_SEC_INVERTINGINPUT_IO1    
+
+#define OPAMP_INVERTINGINPUT_VINM             OPAMP_SEC_INVERTINGINPUT_IO1
+                                                                      
+#define OPAMP_PGACONNECT_NO                   OPAMP_PGA_CONNECT_INVERTINGINPUT_NO             
+#define OPAMP_PGACONNECT_VM0                  OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0            
+#define OPAMP_PGACONNECT_VM1                  OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1          
+                                                        
+/**
+  * @}
+  */
+
+/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define I2S_STANDARD_PHILLIPS      I2S_STANDARD_PHILIPS
+/**
+  * @}
+  */
+
+/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA                       ATA_DATA                
+#define CF_SECTOR_COUNT               ATA_SECTOR_COUNT        
+#define CF_SECTOR_NUMBER              ATA_SECTOR_NUMBER       
+#define CF_CYLINDER_LOW               ATA_CYLINDER_LOW        
+#define CF_CYLINDER_HIGH              ATA_CYLINDER_HIGH       
+#define CF_CARD_HEAD                  ATA_CARD_HEAD           
+#define CF_STATUS_CMD                 ATA_STATUS_CMD          
+#define CF_STATUS_CMD_ALTERNATE       ATA_STATUS_CMD_ALTERNATE
+#define CF_COMMON_DATA_AREA           ATA_COMMON_DATA_AREA    
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD            ATA_READ_SECTOR_CMD 
+#define CF_WRITE_SECTOR_CMD           ATA_WRITE_SECTOR_CMD
+#define CF_ERASE_SECTOR_CMD           ATA_ERASE_SECTOR_CMD
+#define CF_IDENTIFY_CMD               ATA_IDENTIFY_CMD
+
+#define PCCARD_StatusTypedef          HAL_PCCARD_StatusTypeDef
+#define PCCARD_SUCCESS                HAL_PCCARD_STATUS_SUCCESS
+#define PCCARD_ONGOING                HAL_PCCARD_STATUS_ONGOING
+#define PCCARD_ERROR                  HAL_PCCARD_STATUS_ERROR
+#define PCCARD_TIMEOUT                HAL_PCCARD_STATUS_TIMEOUT
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+#define FORMAT_BIN                  RTC_FORMAT_BIN
+#define FORMAT_BCD                  RTC_FORMAT_BCD
+
+#define RTC_ALARMSUBSECONDMASK_None     RTC_ALARMSUBSECONDMASK_NONE
+#define RTC_TAMPERERASEBACKUP_ENABLED   RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED  RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_TAMPERMASK_FLAG_DISABLED    RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_TAMPERMASK_FLAG_ENABLED     RTC_TAMPERMASK_FLAG_ENABLE
+
+#define RTC_MASKTAMPERFLAG_DISABLED     RTC_TAMPERMASK_FLAG_DISABLE 
+#define RTC_MASKTAMPERFLAG_ENABLED      RTC_TAMPERMASK_FLAG_ENABLE 
+#define RTC_TAMPERERASEBACKUP_ENABLED   RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED  RTC_TAMPER_ERASE_BACKUP_DISABLE 
+#define RTC_MASKTAMPERFLAG_DISABLED     RTC_TAMPERMASK_FLAG_DISABLE 
+#define RTC_MASKTAMPERFLAG_ENABLED      RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPER1_2_INTERRUPT         RTC_ALL_TAMPER_INTERRUPT 
+#define RTC_TAMPER1_2_3_INTERRUPT       RTC_ALL_TAMPER_INTERRUPT 
+
+#define RTC_TIMESTAMPPIN_PC13  RTC_TIMESTAMPPIN_DEFAULT
+#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 
+#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PC1   RTC_TIMESTAMPPIN_POS2
+
+#define RTC_OUTPUT_REMAP_PC13  RTC_OUTPUT_REMAP_NONE
+#define RTC_OUTPUT_REMAP_PB14  RTC_OUTPUT_REMAP_POS1
+#define RTC_OUTPUT_REMAP_PB2   RTC_OUTPUT_REMAP_POS1
+
+#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT 
+#define RTC_TAMPERPIN_PA0  RTC_TAMPERPIN_POS1 
+#define RTC_TAMPERPIN_PI8  RTC_TAMPERPIN_POS1
+
+/**
+  * @}
+  */
+
+  
+/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define SMARTCARD_NACK_ENABLED                  SMARTCARD_NACK_ENABLE
+#define SMARTCARD_NACK_DISABLED                 SMARTCARD_NACK_DISABLE
+
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED      SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED       SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLE       SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLE        SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+
+#define SMARTCARD_TIMEOUT_DISABLED              SMARTCARD_TIMEOUT_DISABLE
+#define SMARTCARD_TIMEOUT_ENABLED               SMARTCARD_TIMEOUT_ENABLE
+
+#define SMARTCARD_LASTBIT_DISABLED              SMARTCARD_LASTBIT_DISABLE
+#define SMARTCARD_LASTBIT_ENABLED               SMARTCARD_LASTBIT_ENABLE
+/**
+  * @}
+  */
+
+  
+  /** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define SMBUS_DUALADDRESS_DISABLED      SMBUS_DUALADDRESS_DISABLE
+#define SMBUS_DUALADDRESS_ENABLED       SMBUS_DUALADDRESS_ENABLE
+#define SMBUS_GENERALCALL_DISABLED      SMBUS_GENERALCALL_DISABLE
+#define SMBUS_GENERALCALL_ENABLED       SMBUS_GENERALCALL_ENABLE
+#define SMBUS_NOSTRETCH_DISABLED        SMBUS_NOSTRETCH_DISABLE
+#define SMBUS_NOSTRETCH_ENABLED         SMBUS_NOSTRETCH_ENABLE
+#define SMBUS_ANALOGFILTER_ENABLED      SMBUS_ANALOGFILTER_ENABLE
+#define SMBUS_ANALOGFILTER_DISABLED     SMBUS_ANALOGFILTER_DISABLE
+#define SMBUS_PEC_DISABLED              SMBUS_PEC_DISABLE
+#define SMBUS_PEC_ENABLED               SMBUS_PEC_ENABLE
+#define HAL_SMBUS_STATE_SLAVE_LISTEN    HAL_SMBUS_STATE_LISTEN
+/**
+  * @}
+  */
+  
+  /** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define SPI_TIMODE_DISABLED             SPI_TIMODE_DISABLE
+#define SPI_TIMODE_ENABLED              SPI_TIMODE_ENABLE
+
+#define SPI_CRCCALCULATION_DISABLED     SPI_CRCCALCULATION_DISABLE
+#define SPI_CRCCALCULATION_ENABLED      SPI_CRCCALCULATION_ENABLE
+
+#define SPI_NSS_PULSE_DISABLED          SPI_NSS_PULSE_DISABLE
+#define SPI_NSS_PULSE_ENABLED           SPI_NSS_PULSE_ENABLE
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define CCER_CCxE_MASK                   TIM_CCER_CCxE_MASK
+#define CCER_CCxNE_MASK                  TIM_CCER_CCxNE_MASK
+  
+#define TIM_DMABase_CR1                  TIM_DMABASE_CR1
+#define TIM_DMABase_CR2                  TIM_DMABASE_CR2
+#define TIM_DMABase_SMCR                 TIM_DMABASE_SMCR
+#define TIM_DMABase_DIER                 TIM_DMABASE_DIER
+#define TIM_DMABase_SR                   TIM_DMABASE_SR
+#define TIM_DMABase_EGR                  TIM_DMABASE_EGR
+#define TIM_DMABase_CCMR1                TIM_DMABASE_CCMR1
+#define TIM_DMABase_CCMR2                TIM_DMABASE_CCMR2
+#define TIM_DMABase_CCER                 TIM_DMABASE_CCER
+#define TIM_DMABase_CNT                  TIM_DMABASE_CNT
+#define TIM_DMABase_PSC                  TIM_DMABASE_PSC
+#define TIM_DMABase_ARR                  TIM_DMABASE_ARR
+#define TIM_DMABase_RCR                  TIM_DMABASE_RCR
+#define TIM_DMABase_CCR1                 TIM_DMABASE_CCR1
+#define TIM_DMABase_CCR2                 TIM_DMABASE_CCR2
+#define TIM_DMABase_CCR3                 TIM_DMABASE_CCR3
+#define TIM_DMABase_CCR4                 TIM_DMABASE_CCR4
+#define TIM_DMABase_BDTR                 TIM_DMABASE_BDTR
+#define TIM_DMABase_DCR                  TIM_DMABASE_DCR
+#define TIM_DMABase_DMAR                 TIM_DMABASE_DMAR
+#define TIM_DMABase_OR1                  TIM_DMABASE_OR1
+#define TIM_DMABase_CCMR3                TIM_DMABASE_CCMR3
+#define TIM_DMABase_CCR5                 TIM_DMABASE_CCR5
+#define TIM_DMABase_CCR6                 TIM_DMABASE_CCR6
+#define TIM_DMABase_OR2                  TIM_DMABASE_OR2
+#define TIM_DMABase_OR3                  TIM_DMABASE_OR3
+#define TIM_DMABase_OR                   TIM_DMABASE_OR
+
+#define TIM_EventSource_Update           TIM_EVENTSOURCE_UPDATE
+#define TIM_EventSource_CC1              TIM_EVENTSOURCE_CC1
+#define TIM_EventSource_CC2              TIM_EVENTSOURCE_CC2
+#define TIM_EventSource_CC3              TIM_EVENTSOURCE_CC3
+#define TIM_EventSource_CC4              TIM_EVENTSOURCE_CC4
+#define TIM_EventSource_COM              TIM_EVENTSOURCE_COM
+#define TIM_EventSource_Trigger          TIM_EVENTSOURCE_TRIGGER
+#define TIM_EventSource_Break            TIM_EVENTSOURCE_BREAK
+#define TIM_EventSource_Break2           TIM_EVENTSOURCE_BREAK2
+
+#define TIM_DMABurstLength_1Transfer     TIM_DMABURSTLENGTH_1TRANSFER
+#define TIM_DMABurstLength_2Transfers    TIM_DMABURSTLENGTH_2TRANSFERS
+#define TIM_DMABurstLength_3Transfers    TIM_DMABURSTLENGTH_3TRANSFERS
+#define TIM_DMABurstLength_4Transfers    TIM_DMABURSTLENGTH_4TRANSFERS
+#define TIM_DMABurstLength_5Transfers    TIM_DMABURSTLENGTH_5TRANSFERS
+#define TIM_DMABurstLength_6Transfers    TIM_DMABURSTLENGTH_6TRANSFERS
+#define TIM_DMABurstLength_7Transfers    TIM_DMABURSTLENGTH_7TRANSFERS
+#define TIM_DMABurstLength_8Transfers    TIM_DMABURSTLENGTH_8TRANSFERS
+#define TIM_DMABurstLength_9Transfers    TIM_DMABURSTLENGTH_9TRANSFERS
+#define TIM_DMABurstLength_10Transfers   TIM_DMABURSTLENGTH_10TRANSFERS
+#define TIM_DMABurstLength_11Transfers   TIM_DMABURSTLENGTH_11TRANSFERS
+#define TIM_DMABurstLength_12Transfers   TIM_DMABURSTLENGTH_12TRANSFERS
+#define TIM_DMABurstLength_13Transfers   TIM_DMABURSTLENGTH_13TRANSFERS
+#define TIM_DMABurstLength_14Transfers   TIM_DMABURSTLENGTH_14TRANSFERS
+#define TIM_DMABurstLength_15Transfers   TIM_DMABURSTLENGTH_15TRANSFERS
+#define TIM_DMABurstLength_16Transfers   TIM_DMABURSTLENGTH_16TRANSFERS
+#define TIM_DMABurstLength_17Transfers   TIM_DMABURSTLENGTH_17TRANSFERS
+#define TIM_DMABurstLength_18Transfers   TIM_DMABURSTLENGTH_18TRANSFERS
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define TSC_SYNC_POL_FALL        TSC_SYNC_POLARITY_FALLING
+#define TSC_SYNC_POL_RISE_HIGH   TSC_SYNC_POLARITY_RISING
+/**
+  * @}
+  */
+
+/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define UART_ONEBIT_SAMPLING_DISABLED   UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONEBIT_SAMPLING_ENABLED    UART_ONE_BIT_SAMPLE_ENABLE
+#define UART_ONE_BIT_SAMPLE_DISABLED    UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONE_BIT_SAMPLE_ENABLED     UART_ONE_BIT_SAMPLE_ENABLE
+
+#define __HAL_UART_ONEBIT_ENABLE        __HAL_UART_ONE_BIT_SAMPLE_ENABLE
+#define __HAL_UART_ONEBIT_DISABLE       __HAL_UART_ONE_BIT_SAMPLE_DISABLE
+
+#define __DIV_SAMPLING16                UART_DIV_SAMPLING16
+#define __DIVMANT_SAMPLING16            UART_DIVMANT_SAMPLING16
+#define __DIVFRAQ_SAMPLING16            UART_DIVFRAQ_SAMPLING16
+#define __UART_BRR_SAMPLING16           UART_BRR_SAMPLING16
+
+#define __DIV_SAMPLING8                 UART_DIV_SAMPLING8
+#define __DIVMANT_SAMPLING8             UART_DIVMANT_SAMPLING8
+#define __DIVFRAQ_SAMPLING8             UART_DIVFRAQ_SAMPLING8
+#define __UART_BRR_SAMPLING8            UART_BRR_SAMPLING8
+
+#define UART_WAKEUPMETHODE_IDLELINE     UART_WAKEUPMETHOD_IDLELINE
+#define UART_WAKEUPMETHODE_ADDRESSMARK  UART_WAKEUPMETHOD_ADDRESSMARK
+
+/**
+  * @}
+  */
+
+  
+/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define USART_CLOCK_DISABLED            USART_CLOCK_DISABLE
+#define USART_CLOCK_ENABLED             USART_CLOCK_ENABLE
+
+#define USARTNACK_ENABLED               USART_NACK_ENABLE
+#define USARTNACK_DISABLED              USART_NACK_DISABLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define CFR_BASE                    WWDG_CFR_BASE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define CAN_FilterFIFO0             CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1             CAN_FILTER_FIFO1
+#define CAN_IT_RQCP0                CAN_IT_TME
+#define CAN_IT_RQCP1                CAN_IT_TME
+#define CAN_IT_RQCP2                CAN_IT_TME
+#define INAK_TIMEOUT                CAN_TIMEOUT_VALUE
+#define SLAK_TIMEOUT                CAN_TIMEOUT_VALUE
+#define CAN_TXSTATUS_FAILED         ((uint8_t)0x00)
+#define CAN_TXSTATUS_OK             ((uint8_t)0x01)
+#define CAN_TXSTATUS_PENDING        ((uint8_t)0x02)
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define VLAN_TAG                ETH_VLAN_TAG
+#define MIN_ETH_PAYLOAD         ETH_MIN_ETH_PAYLOAD
+#define MAX_ETH_PAYLOAD         ETH_MAX_ETH_PAYLOAD
+#define JUMBO_FRAME_PAYLOAD     ETH_JUMBO_FRAME_PAYLOAD
+#define MACMIIAR_CR_MASK        ETH_MACMIIAR_CR_MASK
+#define MACCR_CLEAR_MASK        ETH_MACCR_CLEAR_MASK
+#define MACFCR_CLEAR_MASK       ETH_MACFCR_CLEAR_MASK
+#define DMAOMR_CLEAR_MASK       ETH_DMAOMR_CLEAR_MASK
+
+#define ETH_MMCCR              ((uint32_t)0x00000100)  
+#define ETH_MMCRIR             ((uint32_t)0x00000104)  
+#define ETH_MMCTIR             ((uint32_t)0x00000108)  
+#define ETH_MMCRIMR            ((uint32_t)0x0000010C)  
+#define ETH_MMCTIMR            ((uint32_t)0x00000110)  
+#define ETH_MMCTGFSCCR         ((uint32_t)0x0000014C)  
+#define ETH_MMCTGFMSCCR        ((uint32_t)0x00000150)  
+#define ETH_MMCTGFCR           ((uint32_t)0x00000168)  
+#define ETH_MMCRFCECR          ((uint32_t)0x00000194)  
+#define ETH_MMCRFAECR          ((uint32_t)0x00000198)  
+#define ETH_MMCRGUFCR          ((uint32_t)0x000001C4) 
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_CRYP_ComputationCpltCallback     HAL_CRYPEx_ComputationCpltCallback
+/**
+  * @}
+  */  
+
+/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
+  * @{
+  */ 
+  
+#define HAL_HMAC_MD5_Finish          HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish         HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish       HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish       HAL_HASH_SHA256_Finish
+
+/*HASH Algorithm Selection*/
+
+#define HASH_AlgoSelection_SHA1      HASH_ALGOSELECTION_SHA1 
+#define HASH_AlgoSelection_SHA224    HASH_ALGOSELECTION_SHA224
+#define HASH_AlgoSelection_SHA256    HASH_ALGOSELECTION_SHA256
+#define HASH_AlgoSelection_MD5       HASH_ALGOSELECTION_MD5
+
+#define HASH_AlgoMode_HASH         HASH_ALGOMODE_HASH 
+#define HASH_AlgoMode_HMAC         HASH_ALGOMODE_HMAC
+
+#define HASH_HMACKeyType_ShortKey  HASH_HMAC_KEYTYPE_SHORTKEY
+#define HASH_HMACKeyType_LongKey   HASH_HMAC_KEYTYPE_LONGKEY
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
+#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
+#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
+#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
+#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
+#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_VREFINT_OutputSelect  HAL_SYSCFG_VREFINT_OutputSelect
+#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
+#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
+#define HAL_ADC_EnableBuffer_Cmd(cmd)  (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ?  HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define FLASH_HalfPageProgram      HAL_FLASHEx_HalfPageProgram
+#define FLASH_EnableRunPowerDown   HAL_FLASHEx_EnableRunPowerDown
+#define FLASH_DisableRunPowerDown  HAL_FLASHEx_DisableRunPowerDown
+#define HAL_DATA_EEPROMEx_Unlock   HAL_FLASHEx_DATAEEPROM_Unlock
+#define HAL_DATA_EEPROMEx_Lock     HAL_FLASHEx_DATAEEPROM_Lock
+#define HAL_DATA_EEPROMEx_Erase    HAL_FLASHEx_DATAEEPROM_Erase
+#define HAL_DATA_EEPROMEx_Program  HAL_FLASHEx_DATAEEPROM_Program
+
+ /**
+  * @}
+  */
+
+/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_I2CEx_AnalogFilter_Config      HAL_I2CEx_ConfigAnalogFilter
+#define HAL_I2CEx_DigitalFilter_Config     HAL_I2CEx_ConfigDigitalFilter
+
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+ /**
+  * @}
+  */
+
+/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
+  * @{
+  */
+#define HAL_PWR_PVDConfig                             HAL_PWR_ConfigPVD
+#define HAL_PWR_DisableBkUpReg                        HAL_PWREx_DisableBkUpReg
+#define HAL_PWR_DisableFlashPowerDown                 HAL_PWREx_DisableFlashPowerDown
+#define HAL_PWR_DisableVddio2Monitor                  HAL_PWREx_DisableVddio2Monitor
+#define HAL_PWR_EnableBkUpReg                         HAL_PWREx_EnableBkUpReg
+#define HAL_PWR_EnableFlashPowerDown                  HAL_PWREx_EnableFlashPowerDown
+#define HAL_PWR_EnableVddio2Monitor                   HAL_PWREx_EnableVddio2Monitor
+#define HAL_PWR_PVD_PVM_IRQHandler                    HAL_PWREx_PVD_PVM_IRQHandler
+#define HAL_PWR_PVDLevelConfig                        HAL_PWR_ConfigPVD
+#define HAL_PWR_Vddio2Monitor_IRQHandler              HAL_PWREx_Vddio2Monitor_IRQHandler
+#define HAL_PWR_Vddio2MonitorCallback                 HAL_PWREx_Vddio2MonitorCallback
+#define HAL_PWREx_ActivateOverDrive                   HAL_PWREx_EnableOverDrive
+#define HAL_PWREx_DeactivateOverDrive                 HAL_PWREx_DisableOverDrive
+#define HAL_PWREx_DisableSDADCAnalog                  HAL_PWREx_DisableSDADC
+#define HAL_PWREx_EnableSDADCAnalog                   HAL_PWREx_EnableSDADC
+#define HAL_PWREx_PVMConfig                           HAL_PWREx_ConfigPVM
+
+#define PWR_MODE_NORMAL                               PWR_PVD_MODE_NORMAL
+#define PWR_MODE_IT_RISING                            PWR_PVD_MODE_IT_RISING
+#define PWR_MODE_IT_FALLING                           PWR_PVD_MODE_IT_FALLING
+#define PWR_MODE_IT_RISING_FALLING                    PWR_PVD_MODE_IT_RISING_FALLING
+#define PWR_MODE_EVENT_RISING                         PWR_PVD_MODE_EVENT_RISING
+#define PWR_MODE_EVENT_FALLING                        PWR_PVD_MODE_EVENT_FALLING
+#define PWR_MODE_EVENT_RISING_FALLING                 PWR_PVD_MODE_EVENT_RISING_FALLING
+
+#define CR_OFFSET_BB                                  PWR_CR_OFFSET_BB
+#define CSR_OFFSET_BB                                 PWR_CSR_OFFSET_BB
+
+#define DBP_BitNumber                                 DBP_BIT_NUMBER
+#define PVDE_BitNumber                                PVDE_BIT_NUMBER
+#define PMODE_BitNumber                               PMODE_BIT_NUMBER
+#define EWUP_BitNumber                                EWUP_BIT_NUMBER
+#define FPDS_BitNumber                                FPDS_BIT_NUMBER
+#define ODEN_BitNumber                                ODEN_BIT_NUMBER
+#define ODSWEN_BitNumber                              ODSWEN_BIT_NUMBER
+#define MRLVDS_BitNumber                              MRLVDS_BIT_NUMBER
+#define LPLVDS_BitNumber                              LPLVDS_BIT_NUMBER
+#define BRE_BitNumber                                 BRE_BIT_NUMBER
+
+#define PWR_MODE_EVT                                  PWR_PVD_MODE_NORMAL
+ 
+ /**
+  * @}
+  */  
+  
+/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_SMBUS_Slave_Listen_IT          HAL_SMBUS_EnableListen_IT
+#define HAL_SMBUS_SlaveAddrCallback        HAL_SMBUS_AddrCallback         
+#define HAL_SMBUS_SlaveListenCpltCallback  HAL_SMBUS_ListenCpltCallback   
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_SPI_FlushRxFifo                HAL_SPIEx_FlushRxFifo
+/**
+  * @}
+  */  
+
+/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_TIM_DMADelayPulseCplt                       TIM_DMADelayPulseCplt
+#define HAL_TIM_DMAError                                TIM_DMAError
+#define HAL_TIM_DMACaptureCplt                          TIM_DMACaptureCplt
+#define HAL_TIMEx_DMACommutationCplt                    TIMEx_DMACommutationCplt
+/**
+  * @}
+  */
+   
+/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
+  * @{
+  */ 
+#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
+  * @{
+  */ 
+#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
+/**
+  * @}
+  */  
+   
+  
+   /** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
+  * @{
+  */
+  
+/**
+  * @}
+  */
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define AES_IT_CC                      CRYP_IT_CC
+#define AES_IT_ERR                     CRYP_IT_ERR
+#define AES_FLAG_CCF                   CRYP_FLAG_CCF
+/**
+  * @}
+  */  
+  
+/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_GET_BOOT_MODE                   __HAL_SYSCFG_GET_BOOT_MODE
+#define __HAL_REMAPMEMORY_FLASH               __HAL_SYSCFG_REMAPMEMORY_FLASH
+#define __HAL_REMAPMEMORY_SYSTEMFLASH         __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
+#define __HAL_REMAPMEMORY_SRAM                __HAL_SYSCFG_REMAPMEMORY_SRAM
+#define __HAL_REMAPMEMORY_FMC                 __HAL_SYSCFG_REMAPMEMORY_FMC
+#define __HAL_REMAPMEMORY_FMC_SDRAM           __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM 
+#define __HAL_REMAPMEMORY_FSMC                __HAL_SYSCFG_REMAPMEMORY_FSMC
+#define __HAL_REMAPMEMORY_QUADSPI             __HAL_SYSCFG_REMAPMEMORY_QUADSPI
+#define __HAL_FMC_BANK                        __HAL_SYSCFG_FMC_BANK
+#define __HAL_GET_FLAG                        __HAL_SYSCFG_GET_FLAG
+#define __HAL_CLEAR_FLAG                      __HAL_SYSCFG_CLEAR_FLAG
+#define __HAL_VREFINT_OUT_ENABLE              __HAL_SYSCFG_VREFINT_OUT_ENABLE
+#define __HAL_VREFINT_OUT_DISABLE             __HAL_SYSCFG_VREFINT_OUT_DISABLE
+
+#define SYSCFG_FLAG_VREF_READY                SYSCFG_FLAG_VREFINT_READY
+#define SYSCFG_FLAG_RC48                      RCC_FLAG_HSI48
+#define IS_SYSCFG_FASTMODEPLUS_CONFIG         IS_I2C_FASTMODEPLUS
+#define UFB_MODE_BitNumber                    UFB_MODE_BIT_NUMBER
+#define CMP_PD_BitNumber                      CMP_PD_BIT_NUMBER
+
+/**
+  * @}
+  */
+
+   
+/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __ADC_ENABLE                                     __HAL_ADC_ENABLE
+#define __ADC_DISABLE                                    __HAL_ADC_DISABLE
+#define __HAL_ADC_ENABLING_CONDITIONS                    ADC_ENABLING_CONDITIONS
+#define __HAL_ADC_DISABLING_CONDITIONS                   ADC_DISABLING_CONDITIONS
+#define __HAL_ADC_IS_ENABLED                             ADC_IS_ENABLE
+#define __ADC_IS_ENABLED                                 ADC_IS_ENABLE
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR              ADC_IS_SOFTWARE_START_REGULAR
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED             ADC_IS_SOFTWARE_START_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR          ADC_IS_CONVERSION_ONGOING_REGULAR
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED         ADC_IS_CONVERSION_ONGOING_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING                  ADC_IS_CONVERSION_ONGOING
+#define __HAL_ADC_CLEAR_ERRORCODE                        ADC_CLEAR_ERRORCODE
+
+#define __HAL_ADC_GET_RESOLUTION                         ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR_RK                                ADC_JSQR_RK
+#define __HAL_ADC_CFGR_AWD1CH                            ADC_CFGR_AWD1CH_SHIFT
+#define __HAL_ADC_CFGR_AWD23CR                           ADC_CFGR_AWD23CR
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION            ADC_CFGR_INJECT_AUTO_CONVERSION
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE              ADC_CFGR_INJECT_CONTEXT_QUEUE
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS             ADC_CFGR_INJECT_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS                ADC_CFGR_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM                 ADC_CFGR_DISCONTINUOUS_NUM
+#define __HAL_ADC_CFGR_AUTOWAIT                          ADC_CFGR_AUTOWAIT
+#define __HAL_ADC_CFGR_CONTINUOUS                        ADC_CFGR_CONTINUOUS
+#define __HAL_ADC_CFGR_OVERRUN                           ADC_CFGR_OVERRUN
+#define __HAL_ADC_CFGR_DMACONTREQ                        ADC_CFGR_DMACONTREQ
+#define __HAL_ADC_CFGR_EXTSEL                            ADC_CFGR_EXTSEL_SET
+#define __HAL_ADC_JSQR_JEXTSEL                           ADC_JSQR_JEXTSEL_SET
+#define __HAL_ADC_OFR_CHANNEL                            ADC_OFR_CHANNEL
+#define __HAL_ADC_DIFSEL_CHANNEL                         ADC_DIFSEL_CHANNEL
+#define __HAL_ADC_CALFACT_DIFF_SET                       ADC_CALFACT_DIFF_SET
+#define __HAL_ADC_CALFACT_DIFF_GET                       ADC_CALFACT_DIFF_GET
+#define __HAL_ADC_TRX_HIGHTHRESHOLD                      ADC_TRX_HIGHTHRESHOLD
+
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION                ADC_OFFSET_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION         ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION        ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_COMMON_REGISTER                        ADC_COMMON_REGISTER
+#define __HAL_ADC_COMMON_CCR_MULTI                       ADC_COMMON_CCR_MULTI
+#define __HAL_ADC_MULTIMODE_IS_ENABLED                   ADC_MULTIMODE_IS_ENABLE
+#define __ADC_MULTIMODE_IS_ENABLED                       ADC_MULTIMODE_IS_ENABLE
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER        ADC_NONMULTIMODE_OR_MULTIMODEMASTER
+#define __HAL_ADC_COMMON_ADC_OTHER                       ADC_COMMON_ADC_OTHER
+#define __HAL_ADC_MULTI_SLAVE                            ADC_MULTI_SLAVE
+
+#define __HAL_ADC_SQR1_L                                 ADC_SQR1_L_SHIFT
+#define __HAL_ADC_JSQR_JL                                ADC_JSQR_JL_SHIFT
+#define __HAL_ADC_JSQR_RK_JL                             ADC_JSQR_RK_JL
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM                  ADC_CR1_DISCONTINUOUS_NUM
+#define __HAL_ADC_CR1_SCAN                               ADC_CR1_SCAN_SET
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE                   ADC_CONVCYCLES_MAX_RANGE
+#define __HAL_ADC_CLOCK_PRESCALER_RANGE                  ADC_CLOCK_PRESCALER_RANGE
+#define __HAL_ADC_GET_CLOCK_PRESCALER                    ADC_GET_CLOCK_PRESCALER
+
+#define __HAL_ADC_SQR1                                   ADC_SQR1
+#define __HAL_ADC_SMPR1                                  ADC_SMPR1
+#define __HAL_ADC_SMPR2                                  ADC_SMPR2
+#define __HAL_ADC_SQR3_RK                                ADC_SQR3_RK
+#define __HAL_ADC_SQR2_RK                                ADC_SQR2_RK
+#define __HAL_ADC_SQR1_RK                                ADC_SQR1_RK
+#define __HAL_ADC_CR2_CONTINUOUS                         ADC_CR2_CONTINUOUS
+#define __HAL_ADC_CR1_DISCONTINUOUS                      ADC_CR1_DISCONTINUOUS
+#define __HAL_ADC_CR1_SCANCONV                           ADC_CR1_SCANCONV
+#define __HAL_ADC_CR2_EOCSelection                       ADC_CR2_EOCSelection
+#define __HAL_ADC_CR2_DMAContReq                         ADC_CR2_DMAContReq
+#define __HAL_ADC_GET_RESOLUTION                         ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR                                   ADC_JSQR
+
+#define __HAL_ADC_CHSELR_CHANNEL                         ADC_CHSELR_CHANNEL
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS               ADC_CFGR1_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR1_AUTOOFF                          ADC_CFGR1_AUTOOFF
+#define __HAL_ADC_CFGR1_AUTOWAIT                         ADC_CFGR1_AUTOWAIT
+#define __HAL_ADC_CFGR1_CONTINUOUS                       ADC_CFGR1_CONTINUOUS
+#define __HAL_ADC_CFGR1_OVERRUN                          ADC_CFGR1_OVERRUN
+#define __HAL_ADC_CFGR1_SCANDIR                          ADC_CFGR1_SCANDIR
+#define __HAL_ADC_CFGR1_DMACONTREQ                       ADC_CFGR1_DMACONTREQ
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_DHR12R1_ALIGNEMENT                        DAC_DHR12R1_ALIGNMENT
+#define __HAL_DHR12R2_ALIGNEMENT                        DAC_DHR12R2_ALIGNMENT
+#define __HAL_DHR12RD_ALIGNEMENT                        DAC_DHR12RD_ALIGNMENT
+#define IS_DAC_GENERATE_WAVE                            IS_DAC_WAVE
+
+/**
+  * @}
+  */
+   
+/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
+#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
+#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
+#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
+#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
+#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
+#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
+#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
+#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
+#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
+#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
+#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
+#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
+#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
+#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
+#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
+
+#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
+#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
+#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
+#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
+#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
+#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
+#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
+#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
+#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
+#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
+#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
+#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
+#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
+#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
+
+
+#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
+#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
+#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
+#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
+#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
+#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
+#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
+#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
+#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
+#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
+#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
+#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
+#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
+#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)   (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)   (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+#define __HAL_COMP_GET_EXTI_LINE  COMP_GET_EXTI_LINE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
+                          ((WAVE) == DAC_WAVE_NOISE)|| \
+                          ((WAVE) == DAC_WAVE_TRIANGLE))
+  
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define IS_WRPAREA          IS_OB_WRPAREA
+#define IS_TYPEPROGRAM      IS_FLASH_TYPEPROGRAM
+#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
+#define IS_TYPEERASE        IS_FLASH_TYPEERASE
+#define IS_NBSECTORS        IS_FLASH_NBSECTORS
+#define IS_OB_WDG_SOURCE    IS_OB_IWDG_SOURCE
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
+  * @{
+  */
+  
+#define __HAL_I2C_RESET_CR2             I2C_RESET_CR2
+#define __HAL_I2C_GENERATE_START        I2C_GENERATE_START
+#define __HAL_I2C_FREQ_RANGE            I2C_FREQ_RANGE
+#define __HAL_I2C_RISE_TIME             I2C_RISE_TIME
+#define __HAL_I2C_SPEED_STANDARD        I2C_SPEED_STANDARD
+#define __HAL_I2C_SPEED_FAST            I2C_SPEED_FAST
+#define __HAL_I2C_SPEED                 I2C_SPEED
+#define __HAL_I2C_7BIT_ADD_WRITE        I2C_7BIT_ADD_WRITE
+#define __HAL_I2C_7BIT_ADD_READ         I2C_7BIT_ADD_READ
+#define __HAL_I2C_10BIT_ADDRESS         I2C_10BIT_ADDRESS
+#define __HAL_I2C_10BIT_HEADER_WRITE    I2C_10BIT_HEADER_WRITE
+#define __HAL_I2C_10BIT_HEADER_READ     I2C_10BIT_HEADER_READ
+#define __HAL_I2C_MEM_ADD_MSB           I2C_MEM_ADD_MSB
+#define __HAL_I2C_MEM_ADD_LSB           I2C_MEM_ADD_LSB
+#define __HAL_I2C_FREQRANGE             I2C_FREQRANGE
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
+  * @{
+  */
+  
+#define IS_I2S_INSTANCE                 IS_I2S_ALL_INSTANCE
+#define IS_I2S_INSTANCE_EXT             IS_I2S_ALL_INSTANCE_EXT
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
+  * @{
+  */
+  
+#define __IRDA_DISABLE                  __HAL_IRDA_DISABLE
+#define __IRDA_ENABLE                   __HAL_IRDA_ENABLE
+
+#define __HAL_IRDA_GETCLOCKSOURCE       IRDA_GETCLOCKSOURCE
+#define __HAL_IRDA_MASK_COMPUTATION     IRDA_MASK_COMPUTATION
+#define __IRDA_GETCLOCKSOURCE           IRDA_GETCLOCKSOURCE
+#define __IRDA_MASK_COMPUTATION         IRDA_MASK_COMPUTATION
+
+#define IS_IRDA_ONEBIT_SAMPLE           IS_IRDA_ONE_BIT_SAMPLE                  
+
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS  IWDG_ENABLE_WRITE_ACCESS
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_LPTIM_ENABLE_INTERRUPT    __HAL_LPTIM_ENABLE_IT
+#define __HAL_LPTIM_DISABLE_INTERRUPT   __HAL_LPTIM_DISABLE_IT
+#define __HAL_LPTIM_GET_ITSTATUS        __HAL_LPTIM_GET_IT_SOURCE
+
+/**
+  * @}
+  */
+  
+  
+/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __OPAMP_CSR_OPAXPD                OPAMP_CSR_OPAXPD
+#define __OPAMP_CSR_S3SELX                OPAMP_CSR_S3SELX
+#define __OPAMP_CSR_S4SELX                OPAMP_CSR_S4SELX
+#define __OPAMP_CSR_S5SELX                OPAMP_CSR_S5SELX
+#define __OPAMP_CSR_S6SELX                OPAMP_CSR_S6SELX
+#define __OPAMP_CSR_OPAXCAL_L             OPAMP_CSR_OPAXCAL_L
+#define __OPAMP_CSR_OPAXCAL_H             OPAMP_CSR_OPAXCAL_H
+#define __OPAMP_CSR_OPAXLPM               OPAMP_CSR_OPAXLPM
+#define __OPAMP_CSR_ALL_SWITCHES          OPAMP_CSR_ALL_SWITCHES
+#define __OPAMP_CSR_ANAWSELX              OPAMP_CSR_ANAWSELX
+#define __OPAMP_CSR_OPAXCALOUT            OPAMP_CSR_OPAXCALOUT
+#define __OPAMP_OFFSET_TRIM_BITSPOSITION  OPAMP_OFFSET_TRIM_BITSPOSITION
+#define __OPAMP_OFFSET_TRIM_SET           OPAMP_OFFSET_TRIM_SET
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_PVD_EVENT_DISABLE                                  __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PVD_EVENT_ENABLE                                   __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE                    __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE                     __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE                     __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE                      __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PVM_EVENT_DISABLE                                  __HAL_PWR_PVM_EVENT_DISABLE
+#define __HAL_PVM_EVENT_ENABLE                                   __HAL_PWR_PVM_EVENT_ENABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE                    __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE                     __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE                     __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE                      __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
+#define __HAL_PWR_INTERNALWAKEUP_DISABLE                         HAL_PWREx_DisableInternalWakeUpLine
+#define __HAL_PWR_INTERNALWAKEUP_ENABLE                          HAL_PWREx_EnableInternalWakeUpLine
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE                    HAL_PWREx_DisablePullUpPullDownConfig
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE                     HAL_PWREx_EnablePullUpPullDownConfig
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER()                  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()
+#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE                         __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE                          __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE                __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE                 __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE                 __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE                  __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER              __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER               __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVM_DISABLE()                                  HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4()
+#define __HAL_PWR_PVM_ENABLE()                                   HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4()
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE                  HAL_PWREx_DisableSRAM2ContentRetention
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE                   HAL_PWREx_EnableSRAM2ContentRetention
+#define __HAL_PWR_VDDIO2_DISABLE                                 HAL_PWREx_DisableVddIO2
+#define __HAL_PWR_VDDIO2_ENABLE                                  HAL_PWREx_EnableVddIO2
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER                 __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER           __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_VDDUSB_DISABLE                                 HAL_PWREx_DisableVddUSB
+#define __HAL_PWR_VDDUSB_ENABLE                                  HAL_PWREx_EnableVddUSB
+
+#if defined (STM32F4)
+#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD)         __HAL_PWR_PVD_EXTI_ENABLE_IT()
+#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD)        __HAL_PWR_PVD_EXTI_DISABLE_IT()
+#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD)          __HAL_PWR_PVD_EXTI_GET_FLAG()   
+#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD)        __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
+#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD)     __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_PVD_EXTI_CLEAR_FLAG                                __HAL_PWR_PVD_EXTI_CLEAR_FLAG
+#define __HAL_PVD_EXTI_DISABLE_IT                                __HAL_PWR_PVD_EXTI_DISABLE_IT
+#define __HAL_PVD_EXTI_ENABLE_IT                                 __HAL_PWR_PVD_EXTI_ENABLE_IT
+#define __HAL_PVD_EXTI_GENERATE_SWIT                             __HAL_PWR_PVD_EXTI_GENERATE_SWIT
+#define __HAL_PVD_EXTI_GET_FLAG                                  __HAL_PWR_PVD_EXTI_GET_FLAG 
+#endif /* STM32F4 */
+/**   
+  * @}
+  */  
+  
+  
+/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
+  * @{
+  */
+  
+#define RCC_StopWakeUpClock_MSI     RCC_STOP_WAKEUPCLOCK_MSI
+#define RCC_StopWakeUpClock_HSI     RCC_STOP_WAKEUPCLOCK_HSI
+
+#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+
+#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
+#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
+#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE
+#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE
+#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET
+#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET
+#define __ADC1_CLK_DISABLE        __HAL_RCC_ADC1_CLK_DISABLE
+#define __ADC1_CLK_ENABLE         __HAL_RCC_ADC1_CLK_ENABLE
+#define __ADC1_FORCE_RESET        __HAL_RCC_ADC1_FORCE_RESET
+#define __ADC1_RELEASE_RESET      __HAL_RCC_ADC1_RELEASE_RESET
+#define __ADC1_CLK_SLEEP_ENABLE   __HAL_RCC_ADC1_CLK_SLEEP_ENABLE  
+#define __ADC1_CLK_SLEEP_DISABLE  __HAL_RCC_ADC1_CLK_SLEEP_DISABLE  
+#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE
+#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE
+#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
+#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
+#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
+#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
+#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
+#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
+#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#define __CRYP_CLK_SLEEP_ENABLE      __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
+#define __CRYP_CLK_SLEEP_DISABLE  __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
+#define __CRYP_CLK_ENABLE  __HAL_RCC_CRYP_CLK_ENABLE
+#define __CRYP_CLK_DISABLE  __HAL_RCC_CRYP_CLK_DISABLE
+#define __CRYP_FORCE_RESET  __HAL_RCC_CRYP_FORCE_RESET
+#define __CRYP_RELEASE_RESET  __HAL_RCC_CRYP_RELEASE_RESET
+#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
+#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
+#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
+#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
+#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
+#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
+#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
+#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
+#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
+#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
+#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
+#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
+#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
+#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
+#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
+#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
+#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
+#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
+#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
+#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
+#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
+#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
+#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN_CLK_DISABLE         __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN_CLK_ENABLE          __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN_FORCE_RESET         __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN_RELEASE_RESET       __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
+#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
+#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
+#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
+#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
+#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
+#define __COMP_CLK_DISABLE        __HAL_RCC_COMP_CLK_DISABLE
+#define __COMP_CLK_ENABLE         __HAL_RCC_COMP_CLK_ENABLE
+#define __COMP_FORCE_RESET        __HAL_RCC_COMP_FORCE_RESET
+#define __COMP_RELEASE_RESET      __HAL_RCC_COMP_RELEASE_RESET
+#define __COMP_CLK_SLEEP_ENABLE   __HAL_RCC_COMP_CLK_SLEEP_ENABLE
+#define __COMP_CLK_SLEEP_DISABLE  __HAL_RCC_COMP_CLK_SLEEP_DISABLE
+#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
+#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
+#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
+#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
+#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
+#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
+#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
+#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
+#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
+#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
+#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
+#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
+#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
+#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
+#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
+#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
+#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
+#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
+#define __DBGMCU_CLK_ENABLE     __HAL_RCC_DBGMCU_CLK_ENABLE
+#define __DBGMCU_CLK_DISABLE     __HAL_RCC_DBGMCU_CLK_DISABLE
+#define __DBGMCU_FORCE_RESET    __HAL_RCC_DBGMCU_FORCE_RESET
+#define __DBGMCU_RELEASE_RESET  __HAL_RCC_DBGMCU_RELEASE_RESET
+#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
+#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
+#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
+#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
+#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
+#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
+#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
+#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
+#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
+#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
+#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
+#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
+#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
+#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
+#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
+#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
+#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
+#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
+#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
+#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
+#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
+#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
+#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
+#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
+#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
+#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
+#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
+#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
+#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
+#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
+#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
+#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
+#define __FLITF_CLK_DISABLE       __HAL_RCC_FLITF_CLK_DISABLE
+#define __FLITF_CLK_ENABLE        __HAL_RCC_FLITF_CLK_ENABLE
+#define __FLITF_FORCE_RESET       __HAL_RCC_FLITF_FORCE_RESET
+#define __FLITF_RELEASE_RESET     __HAL_RCC_FLITF_RELEASE_RESET
+#define __FLITF_CLK_SLEEP_ENABLE  __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
+#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
+#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
+#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
+#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
+#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
+#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
+#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
+#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
+#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
+#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
+#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
+#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
+#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
+#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
+#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
+#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
+#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
+#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
+#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
+#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
+#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
+#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
+#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
+#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
+#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
+#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
+#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
+#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
+#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
+#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
+#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
+#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
+#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
+#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
+#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
+#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
+#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
+#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
+#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
+#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
+#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
+#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
+#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
+#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
+#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
+#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
+#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
+#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
+#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
+#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
+#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
+#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
+#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
+#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
+#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
+#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
+#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
+#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
+#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
+#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
+#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
+#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
+#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
+#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
+#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
+#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
+#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
+#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
+#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
+#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
+#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
+#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
+#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
+#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
+#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
+#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
+#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
+#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
+#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
+#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
+#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
+#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
+#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
+#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
+#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
+#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
+#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
+#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
+#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
+#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
+#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
+#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
+#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
+#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
+#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
+#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
+#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
+#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
+#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
+#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
+#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
+#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
+#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
+#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
+#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
+#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
+#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
+#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
+#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
+#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
+#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
+#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
+#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
+#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
+#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
+#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
+#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
+#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
+#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
+#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
+#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
+#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
+#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
+#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
+#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
+#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
+#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
+#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
+#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
+#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
+#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
+#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
+#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
+#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
+#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
+#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
+#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
+#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
+#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
+#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
+#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
+#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
+#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
+#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
+#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
+#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
+#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
+#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
+#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
+#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
+#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
+#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
+#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
+#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
+#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
+#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
+#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
+#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
+#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
+#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
+#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
+#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
+#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
+#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
+#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
+#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
+#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
+#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
+#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
+#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
+#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
+#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
+#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
+#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
+#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
+#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
+#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
+#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
+#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
+#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
+#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
+#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
+#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
+#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
+#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
+#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
+#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
+#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
+#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
+#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
+#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
+#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
+#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
+#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
+#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
+#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
+#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
+#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
+#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
+#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
+#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
+#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
+#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
+#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
+#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
+#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
+#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
+#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
+#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
+#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
+#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
+#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
+#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
+#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
+#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
+#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
+#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
+#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
+#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
+#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
+#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
+#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
+#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
+#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
+#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
+#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
+#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
+#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
+#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
+#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
+#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
+#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
+#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
+#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
+#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
+#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
+#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
+#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
+#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
+#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
+#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
+#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
+#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
+#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
+#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
+#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
+#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
+#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
+#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
+#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
+#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
+#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
+#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
+#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
+#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
+#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
+#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
+#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
+#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
+#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
+#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
+#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
+#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
+#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
+#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
+#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
+#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
+#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
+#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
+#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
+#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
+#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
+#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
+#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
+#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
+#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
+#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
+#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
+#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
+#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
+#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
+#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
+#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
+#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
+#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
+#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
+#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
+#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
+#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
+#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
+#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
+#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
+#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
+#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
+#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
+#define __USART4_CLK_DISABLE        __HAL_RCC_USART4_CLK_DISABLE
+#define __USART4_CLK_ENABLE         __HAL_RCC_USART4_CLK_ENABLE
+#define __USART4_CLK_SLEEP_ENABLE   __HAL_RCC_USART4_CLK_SLEEP_ENABLE
+#define __USART4_CLK_SLEEP_DISABLE  __HAL_RCC_USART4_CLK_SLEEP_DISABLE 
+#define __USART4_FORCE_RESET        __HAL_RCC_USART4_FORCE_RESET
+#define __USART4_RELEASE_RESET      __HAL_RCC_USART4_RELEASE_RESET
+#define __USART5_CLK_DISABLE        __HAL_RCC_USART5_CLK_DISABLE
+#define __USART5_CLK_ENABLE         __HAL_RCC_USART5_CLK_ENABLE
+#define __USART5_CLK_SLEEP_ENABLE   __HAL_RCC_USART5_CLK_SLEEP_ENABLE
+#define __USART5_CLK_SLEEP_DISABLE  __HAL_RCC_USART5_CLK_SLEEP_DISABLE 
+#define __USART5_FORCE_RESET        __HAL_RCC_USART5_FORCE_RESET
+#define __USART5_RELEASE_RESET      __HAL_RCC_USART5_RELEASE_RESET
+#define __USART7_CLK_DISABLE        __HAL_RCC_USART7_CLK_DISABLE
+#define __USART7_CLK_ENABLE         __HAL_RCC_USART7_CLK_ENABLE
+#define __USART7_FORCE_RESET        __HAL_RCC_USART7_FORCE_RESET
+#define __USART7_RELEASE_RESET      __HAL_RCC_USART7_RELEASE_RESET
+#define __USART8_CLK_DISABLE        __HAL_RCC_USART8_CLK_DISABLE
+#define __USART8_CLK_ENABLE         __HAL_RCC_USART8_CLK_ENABLE
+#define __USART8_FORCE_RESET        __HAL_RCC_USART8_FORCE_RESET
+#define __USART8_RELEASE_RESET      __HAL_RCC_USART8_RELEASE_RESET
+#define __USB_CLK_DISABLE         __HAL_RCC_USB_CLK_DISABLE
+#define __USB_CLK_ENABLE          __HAL_RCC_USB_CLK_ENABLE
+#define __USB_FORCE_RESET         __HAL_RCC_USB_FORCE_RESET
+#define __USB_CLK_SLEEP_ENABLE    __HAL_RCC_USB_CLK_SLEEP_ENABLE
+#define __USB_CLK_SLEEP_DISABLE   __HAL_RCC_USB_CLK_SLEEP_DISABLE
+#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
+#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
+#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
+#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
+#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
+#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
+#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
+#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
+#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
+#define __TIM21_CLK_ENABLE   __HAL_RCC_TIM21_CLK_ENABLE
+#define __TIM21_CLK_DISABLE   __HAL_RCC_TIM21_CLK_DISABLE
+#define __TIM21_FORCE_RESET   __HAL_RCC_TIM21_FORCE_RESET
+#define __TIM21_RELEASE_RESET  __HAL_RCC_TIM21_RELEASE_RESET
+#define __TIM21_CLK_SLEEP_ENABLE   __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
+#define __TIM21_CLK_SLEEP_DISABLE   __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
+#define __TIM22_CLK_ENABLE   __HAL_RCC_TIM22_CLK_ENABLE
+#define __TIM22_CLK_DISABLE   __HAL_RCC_TIM22_CLK_DISABLE
+#define __TIM22_FORCE_RESET   __HAL_RCC_TIM22_FORCE_RESET
+#define __TIM22_RELEASE_RESET  __HAL_RCC_TIM22_RELEASE_RESET
+#define __TIM22_CLK_SLEEP_ENABLE   __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
+#define __TIM22_CLK_SLEEP_DISABLE   __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
+#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
+#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
+#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
+#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
+#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
+#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
+#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
+#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
+
+#define __USB_OTG_FS_FORCE_RESET  __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __USB_OTG_FS_RELEASE_RESET  __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
+#define __USB_OTG_HS_CLK_DISABLE  __HAL_RCC_USB_OTG_HS_CLK_DISABLE
+#define __USB_OTG_HS_CLK_ENABLE          __HAL_RCC_USB_OTG_HS_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_ENABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_DISABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE  
+#define __TIM9_CLK_SLEEP_ENABLE          __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
+#define __TIM9_CLK_SLEEP_DISABLE  __HAL_RCC_TIM9_CLK_SLEEP_DISABLE  
+#define __TIM10_CLK_SLEEP_ENABLE  __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
+#define __TIM10_CLK_SLEEP_DISABLE  __HAL_RCC_TIM10_CLK_SLEEP_DISABLE  
+#define __TIM11_CLK_SLEEP_ENABLE  __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
+#define __TIM11_CLK_SLEEP_DISABLE  __HAL_RCC_TIM11_CLK_SLEEP_DISABLE  
+#define __ETHMACPTP_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
+#define __ETHMACPTP_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_ENABLE          __HAL_RCC_ETHMACPTP_CLK_ENABLE
+#define __ETHMACPTP_CLK_DISABLE          __HAL_RCC_ETHMACPTP_CLK_DISABLE  
+#define __HASH_CLK_ENABLE          __HAL_RCC_HASH_CLK_ENABLE
+#define __HASH_FORCE_RESET          __HAL_RCC_HASH_FORCE_RESET
+#define __HASH_RELEASE_RESET          __HAL_RCC_HASH_RELEASE_RESET
+#define __HASH_CLK_SLEEP_ENABLE          __HAL_RCC_HASH_CLK_SLEEP_ENABLE
+#define __HASH_CLK_SLEEP_DISABLE  __HAL_RCC_HASH_CLK_SLEEP_DISABLE
+#define __HASH_CLK_DISABLE            __HAL_RCC_HASH_CLK_DISABLE  
+#define __SPI5_CLK_ENABLE          __HAL_RCC_SPI5_CLK_ENABLE
+#define __SPI5_CLK_DISABLE              __HAL_RCC_SPI5_CLK_DISABLE
+#define __SPI5_FORCE_RESET          __HAL_RCC_SPI5_FORCE_RESET
+#define __SPI5_RELEASE_RESET          __HAL_RCC_SPI5_RELEASE_RESET
+#define __SPI5_CLK_SLEEP_ENABLE          __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
+#define __SPI5_CLK_SLEEP_DISABLE  __HAL_RCC_SPI5_CLK_SLEEP_DISABLE  
+#define __SPI6_CLK_ENABLE          __HAL_RCC_SPI6_CLK_ENABLE
+#define __SPI6_CLK_DISABLE          __HAL_RCC_SPI6_CLK_DISABLE
+#define __SPI6_FORCE_RESET          __HAL_RCC_SPI6_FORCE_RESET
+#define __SPI6_RELEASE_RESET         __HAL_RCC_SPI6_RELEASE_RESET
+#define __SPI6_CLK_SLEEP_ENABLE          __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
+#define __SPI6_CLK_SLEEP_DISABLE  __HAL_RCC_SPI6_CLK_SLEEP_DISABLE  
+#define __LTDC_CLK_ENABLE          __HAL_RCC_LTDC_CLK_ENABLE
+#define __LTDC_CLK_DISABLE          __HAL_RCC_LTDC_CLK_DISABLE
+#define __LTDC_FORCE_RESET          __HAL_RCC_LTDC_FORCE_RESET
+#define __LTDC_RELEASE_RESET          __HAL_RCC_LTDC_RELEASE_RESET
+#define __LTDC_CLK_SLEEP_ENABLE          __HAL_RCC_LTDC_CLK_SLEEP_ENABLE  
+#define __ETHMAC_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE  
+#define __ETHMACTX_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
+#define __ETHMACTX_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE  
+#define __ETHMACRX_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
+#define __ETHMACRX_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE  
+#define __TIM12_CLK_SLEEP_ENABLE  __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
+#define __TIM12_CLK_SLEEP_DISABLE  __HAL_RCC_TIM12_CLK_SLEEP_DISABLE  
+#define __TIM13_CLK_SLEEP_ENABLE  __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
+#define __TIM13_CLK_SLEEP_DISABLE  __HAL_RCC_TIM13_CLK_SLEEP_DISABLE  
+#define __TIM14_CLK_SLEEP_ENABLE  __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
+#define __TIM14_CLK_SLEEP_DISABLE  __HAL_RCC_TIM14_CLK_SLEEP_DISABLE  
+#define __BKPSRAM_CLK_ENABLE          __HAL_RCC_BKPSRAM_CLK_ENABLE
+#define __BKPSRAM_CLK_DISABLE          __HAL_RCC_BKPSRAM_CLK_DISABLE
+#define __BKPSRAM_CLK_SLEEP_ENABLE  __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
+#define __BKPSRAM_CLK_SLEEP_DISABLE  __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE  
+#define __CCMDATARAMEN_CLK_ENABLE  __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
+#define __CCMDATARAMEN_CLK_DISABLE  __HAL_RCC_CCMDATARAMEN_CLK_DISABLE  
+#define __USART6_CLK_ENABLE          __HAL_RCC_USART6_CLK_ENABLE
+#define __USART6_CLK_DISABLE          __HAL_RCC_USART6_CLK_DISABLE
+#define __USART6_FORCE_RESET        __HAL_RCC_USART6_FORCE_RESET
+#define __USART6_RELEASE_RESET        __HAL_RCC_USART6_RELEASE_RESET
+#define __USART6_CLK_SLEEP_ENABLE  __HAL_RCC_USART6_CLK_SLEEP_ENABLE
+#define __USART6_CLK_SLEEP_DISABLE  __HAL_RCC_USART6_CLK_SLEEP_DISABLE  
+#define __SPI4_CLK_ENABLE          __HAL_RCC_SPI4_CLK_ENABLE
+#define __SPI4_CLK_DISABLE          __HAL_RCC_SPI4_CLK_DISABLE
+#define __SPI4_FORCE_RESET          __HAL_RCC_SPI4_FORCE_RESET
+#define __SPI4_RELEASE_RESET        __HAL_RCC_SPI4_RELEASE_RESET
+#define __SPI4_CLK_SLEEP_ENABLE   __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
+#define __SPI4_CLK_SLEEP_DISABLE  __HAL_RCC_SPI4_CLK_SLEEP_DISABLE  
+#define __GPIOI_CLK_ENABLE          __HAL_RCC_GPIOI_CLK_ENABLE
+#define __GPIOI_CLK_DISABLE          __HAL_RCC_GPIOI_CLK_DISABLE
+#define __GPIOI_FORCE_RESET          __HAL_RCC_GPIOI_FORCE_RESET
+#define __GPIOI_RELEASE_RESET          __HAL_RCC_GPIOI_RELEASE_RESET
+#define __GPIOI_CLK_SLEEP_ENABLE  __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
+#define __GPIOI_CLK_SLEEP_DISABLE  __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE  
+#define __GPIOJ_CLK_ENABLE          __HAL_RCC_GPIOJ_CLK_ENABLE
+#define __GPIOJ_CLK_DISABLE          __HAL_RCC_GPIOJ_CLK_DISABLE
+#define __GPIOJ_FORCE_RESET         __HAL_RCC_GPIOJ_FORCE_RESET
+#define __GPIOJ_RELEASE_RESET          __HAL_RCC_GPIOJ_RELEASE_RESET
+#define __GPIOJ_CLK_SLEEP_ENABLE  __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
+#define __GPIOJ_CLK_SLEEP_DISABLE  __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE  
+#define __GPIOK_CLK_ENABLE          __HAL_RCC_GPIOK_CLK_ENABLE
+#define __GPIOK_CLK_DISABLE          __HAL_RCC_GPIOK_CLK_DISABLE
+#define __GPIOK_RELEASE_RESET          __HAL_RCC_GPIOK_RELEASE_RESET
+#define __GPIOK_CLK_SLEEP_ENABLE  __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
+#define __GPIOK_CLK_SLEEP_DISABLE  __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE  
+#define __ETH_CLK_ENABLE          __HAL_RCC_ETH_CLK_ENABLE
+#define __ETH_CLK_DISABLE          __HAL_RCC_ETH_CLK_DISABLE  
+#define __DCMI_CLK_ENABLE          __HAL_RCC_DCMI_CLK_ENABLE
+#define __DCMI_CLK_DISABLE          __HAL_RCC_DCMI_CLK_DISABLE
+#define __DCMI_FORCE_RESET          __HAL_RCC_DCMI_FORCE_RESET
+#define __DCMI_RELEASE_RESET          __HAL_RCC_DCMI_RELEASE_RESET
+#define __DCMI_CLK_SLEEP_ENABLE   __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
+#define __DCMI_CLK_SLEEP_DISABLE  __HAL_RCC_DCMI_CLK_SLEEP_DISABLE  
+#define __UART7_CLK_ENABLE          __HAL_RCC_UART7_CLK_ENABLE
+#define __UART7_CLK_DISABLE          __HAL_RCC_UART7_CLK_DISABLE
+#define __UART7_RELEASE_RESET       __HAL_RCC_UART7_RELEASE_RESET
+#define __UART7_FORCE_RESET       __HAL_RCC_UART7_FORCE_RESET
+#define __UART7_CLK_SLEEP_ENABLE  __HAL_RCC_UART7_CLK_SLEEP_ENABLE
+#define __UART7_CLK_SLEEP_DISABLE  __HAL_RCC_UART7_CLK_SLEEP_DISABLE  
+#define __UART8_CLK_ENABLE          __HAL_RCC_UART8_CLK_ENABLE
+#define __UART8_CLK_DISABLE          __HAL_RCC_UART8_CLK_DISABLE
+#define __UART8_FORCE_RESET          __HAL_RCC_UART8_FORCE_RESET
+#define __UART8_RELEASE_RESET          __HAL_RCC_UART8_RELEASE_RESET
+#define __UART8_CLK_SLEEP_ENABLE  __HAL_RCC_UART8_CLK_SLEEP_ENABLE
+#define __UART8_CLK_SLEEP_DISABLE  __HAL_RCC_UART8_CLK_SLEEP_DISABLE  
+#define __OTGHS_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __OTGHS_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __OTGHS_FORCE_RESET          __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __OTGHS_RELEASE_RESET          __HAL_RCC_USB_OTG_HS_RELEASE_RESET  
+#define __OTGHSULPI_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __OTGHSULPI_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
+#define __HAL_RCC_OTGHS_FORCE_RESET          __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __HAL_RCC_OTGHS_RELEASE_RESET          __HAL_RCC_USB_OTG_HS_RELEASE_RESET  
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE 
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED   
+#define __CRYP_FORCE_RESET          __HAL_RCC_CRYP_FORCE_RESET  
+#define __SRAM3_CLK_SLEEP_ENABLE  __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE  
+#define __CAN2_CLK_SLEEP_ENABLE          __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_DISABLE  __HAL_RCC_CAN2_CLK_SLEEP_DISABLE  
+#define __DAC_CLK_SLEEP_ENABLE          __HAL_RCC_DAC_CLK_SLEEP_ENABLE
+#define __DAC_CLK_SLEEP_DISABLE   __HAL_RCC_DAC_CLK_SLEEP_DISABLE  
+#define __ADC2_CLK_SLEEP_ENABLE   __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
+#define __ADC2_CLK_SLEEP_DISABLE  __HAL_RCC_ADC2_CLK_SLEEP_DISABLE  
+#define __ADC3_CLK_SLEEP_ENABLE          __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
+#define __ADC3_CLK_SLEEP_DISABLE  __HAL_RCC_ADC3_CLK_SLEEP_DISABLE  
+#define __FSMC_FORCE_RESET          __HAL_RCC_FSMC_FORCE_RESET
+#define __FSMC_RELEASE_RESET          __HAL_RCC_FSMC_RELEASE_RESET
+#define __FSMC_CLK_SLEEP_ENABLE          __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
+#define __FSMC_CLK_SLEEP_DISABLE  __HAL_RCC_FSMC_CLK_SLEEP_DISABLE  
+#define __SDIO_FORCE_RESET          __HAL_RCC_SDIO_FORCE_RESET
+#define __SDIO_RELEASE_RESET          __HAL_RCC_SDIO_RELEASE_RESET
+#define __SDIO_CLK_SLEEP_DISABLE  __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __SDIO_CLK_SLEEP_ENABLE          __HAL_RCC_SDIO_CLK_SLEEP_ENABLE  
+#define __DMA2D_CLK_ENABLE          __HAL_RCC_DMA2D_CLK_ENABLE
+#define __DMA2D_CLK_DISABLE          __HAL_RCC_DMA2D_CLK_DISABLE
+#define __DMA2D_FORCE_RESET          __HAL_RCC_DMA2D_FORCE_RESET
+#define __DMA2D_RELEASE_RESET          __HAL_RCC_DMA2D_RELEASE_RESET
+#define __DMA2D_CLK_SLEEP_ENABLE  __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_SLEEP_DISABLE  __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
+
+/* alias define maintained for legacy */
+#define __HAL_RCC_OTGFS_FORCE_RESET    __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __HAL_RCC_OTGFS_RELEASE_RESET  __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+
+#if defined(STM32F4)
+#define __HAL_RCC_SDMMC1_CLK_ENABLE        __HAL_RCC_SDIO_CLK_ENABLE
+#define __HAL_RCC_SDMMC1_FORCE_RESET       __HAL_RCC_SDIO_FORCE_RESET
+#define __HAL_RCC_SDMMC1_RELEASE_RESET     __HAL_RCC_SDIO_RELEASE_RESET
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE  __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDMMC1_CLK_ENABLE        __HAL_RCC_SDIO_CLK_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_DISABLE       __HAL_RCC_SDIO_CLK_DISABLE
+#define Sdmmc1ClockSelection               SdioClockSelection
+#define RCC_PERIPHCLK_SDMMC1               RCC_PERIPHCLK_SDIO
+#define RCC_SDMMC1CLKSOURCE_CLK48          RCC_SDIOCLKSOURCE_CK48
+#define RCC_SDMMC1CLKSOURCE_SYSCLK         RCC_SDIOCLKSOURCE_SYSCLK
+#define __HAL_RCC_SDMMC1_CONFIG            __HAL_RCC_SDIO_CONFIG
+#define __HAL_RCC_GET_SDMMC1_SOURCE        __HAL_RCC_GET_SDIO_SOURCE
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define __HAL_RCC_SDIO_CLK_ENABLE          __HAL_RCC_SDMMC1_CLK_ENABLE
+#define __HAL_RCC_SDIO_FORCE_RESET         __HAL_RCC_SDMMC1_FORCE_RESET
+#define __HAL_RCC_SDIO_RELEASE_RESET       __HAL_RCC_SDMMC1_RELEASE_RESET
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE    __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE   __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDIO_CLK_ENABLE          __HAL_RCC_SDMMC1_CLK_ENABLE
+#define __HAL_RCC_SDIO_CLK_DISABLE         __HAL_RCC_SDMMC1_CLK_DISABLE
+#define SdioClockSelection                 Sdmmc1ClockSelection
+#define RCC_PERIPHCLK_SDIO                 RCC_PERIPHCLK_SDMMC1
+#define __HAL_RCC_SDIO_CONFIG              __HAL_RCC_SDMMC1_CONFIG
+#define __HAL_RCC_GET_SDIO_SOURCE          __HAL_RCC_GET_SDMMC1_SOURCE	
+#endif
+
+#if defined(STM32F7)
+#define RCC_SDIOCLKSOURCE_CK48             RCC_SDMMC1CLKSOURCE_CLK48
+#define RCC_SDIOCLKSOURCE_SYSCLK           RCC_SDMMC1CLKSOURCE_SYSCLK
+#endif
+
+#define __HAL_RCC_I2SCLK            __HAL_RCC_I2S_CONFIG
+#define __HAL_RCC_I2SCLK_CONFIG     __HAL_RCC_I2S_CONFIG
+
+#define __RCC_PLLSRC           RCC_GET_PLL_OSCSOURCE
+
+#define IS_RCC_MSIRANGE        IS_RCC_MSI_CLOCK_RANGE
+#define IS_RCC_RTCCLK_SOURCE   IS_RCC_RTCCLKSOURCE
+#define IS_RCC_SYSCLK_DIV      IS_RCC_HCLK
+#define IS_RCC_HCLK_DIV        IS_RCC_PCLK
+
+#define IS_RCC_MCOSOURCE       IS_RCC_MCO1SOURCE
+#define RCC_MCO_NODIV          RCC_MCODIV_1
+#define RCC_RTCCLKSOURCE_NONE  RCC_RTCCLKSOURCE_NO_CLK
+
+#define HSION_BitNumber        RCC_HSION_BIT_NUMBER
+#define CSSON_BitNumber        RCC_CSSON_BIT_NUMBER
+#define PLLON_BitNumber        RCC_PLLON_BIT_NUMBER
+#define PLLI2SON_BitNumber     RCC_PLLI2SON_BIT_NUMBER
+#define I2SSRC_BitNumber       RCC_I2SSRC_BIT_NUMBER
+#define RTCEN_BitNumber        RCC_RTCEN_BIT_NUMBER
+#define BDRST_BitNumber        RCC_BDRST_BIT_NUMBER
+#define LSION_BitNumber        RCC_LSION_BIT_NUMBER
+#define PLLSAION_BitNumber     RCC_PLLSAION_BIT_NUMBER
+#define TIMPRE_BitNumber       RCC_TIMPRE_BIT_NUMBER
+
+#define CR_BYTE2_ADDRESS       RCC_CR_BYTE2_ADDRESS
+#define CIR_BYTE1_ADDRESS      RCC_CIR_BYTE1_ADDRESS
+#define CIR_BYTE2_ADDRESS      RCC_CIR_BYTE2_ADDRESS
+#define BDCR_BYTE0_ADDRESS     RCC_BDCR_BYTE0_ADDRESS
+#define DBP_TIMEOUT_VALUE      RCC_DBP_TIMEOUT_VALUE
+#define LSE_TIMEOUT_VALUE      RCC_LSE_TIMEOUT_VALUE
+
+#define CR_HSION_BB            RCC_CR_HSION_BB
+#define CR_CSSON_BB            RCC_CR_CSSON_BB
+#define CR_PLLON_BB            RCC_CR_PLLON_BB
+#define CR_PLLI2SON_BB         RCC_CR_PLLI2SON_BB
+#define CR_MSION_BB            RCC_CR_MSION_BB
+#define CSR_LSION_BB           RCC_CSR_LSION_BB
+#define CSR_LSEON_BB           RCC_CSR_LSEON_BB
+#define CSR_LSEBYP_BB          RCC_CSR_LSEBYP_BB
+#define CSR_RTCEN_BB           RCC_CSR_RTCEN_BB
+#define CSR_RTCRST_BB          RCC_CSR_RTCRST_BB
+#define CFGR_I2SSRC_BB         RCC_CFGR_I2SSRC_BB
+#define BDCR_RTCEN_BB          RCC_BDCR_RTCEN_BB
+#define BDCR_BDRST_BB          RCC_BDCR_BDRST_BB
+#define CR_PLLSAION_BB         RCC_CR_PLLSAION_BB
+#define DCKCFGR_TIMPRE_BB      RCC_DCKCFGR_TIMPRE_BB
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define  HAL_RNG_ReadyCallback(__HANDLE__)  HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)                                       
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+  
+#define __HAL_RTC_CLEAR_FLAG                      __HAL_RTC_EXTI_CLEAR_FLAG
+#define __HAL_RTC_DISABLE_IT                      __HAL_RTC_EXTI_DISABLE_IT
+#define __HAL_RTC_ENABLE_IT                       __HAL_RTC_EXTI_ENABLE_IT
+
+#if defined (STM32F1)
+#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT)  __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
+
+#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT)   __HAL_RTC_ALARM_EXTI_ENABLE_IT()
+
+#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT)  __HAL_RTC_ALARM_EXTI_DISABLE_IT()
+
+#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT)    __HAL_RTC_ALARM_EXTI_GET_FLAG()
+
+#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT)   __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__)  (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
+                                                   (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__)   (((__EXTI_LINE__)  == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
+                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__)  (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
+                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__)    (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
+                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__)   (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
+                                                      (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() :  \
+                                                          __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+#endif   /* STM32F1 */
+
+#define IS_ALARM                                  IS_RTC_ALARM
+#define IS_ALARM_MASK                             IS_RTC_ALARM_MASK
+#define IS_TAMPER                                 IS_RTC_TAMPER
+#define IS_TAMPER_ERASE_MODE                      IS_RTC_TAMPER_ERASE_MODE
+#define IS_TAMPER_FILTER                          IS_RTC_TAMPER_FILTER 
+#define IS_TAMPER_INTERRUPT                       IS_RTC_TAMPER_INTERRUPT
+#define IS_TAMPER_MASKFLAG_STATE                  IS_RTC_TAMPER_MASKFLAG_STATE
+#define IS_TAMPER_PRECHARGE_DURATION              IS_RTC_TAMPER_PRECHARGE_DURATION
+#define IS_TAMPER_PULLUP_STATE                    IS_RTC_TAMPER_PULLUP_STATE
+#define IS_TAMPER_SAMPLING_FREQ                   IS_RTC_TAMPER_SAMPLING_FREQ
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION     IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
+#define IS_TAMPER_TRIGGER                         IS_RTC_TAMPER_TRIGGER
+#define IS_WAKEUP_CLOCK                           IS_RTC_WAKEUP_CLOCK
+#define IS_WAKEUP_COUNTER                         IS_RTC_WAKEUP_COUNTER
+
+#define __RTC_WRITEPROTECTION_ENABLE  __HAL_RTC_WRITEPROTECTION_ENABLE
+#define __RTC_WRITEPROTECTION_DISABLE  __HAL_RTC_WRITEPROTECTION_DISABLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define SD_OCR_CID_CSD_OVERWRIETE   SD_OCR_CID_CSD_OVERWRITE
+#define SD_CMD_SD_APP_STAUS         SD_CMD_SD_APP_STATUS
+
+#if defined(STM32F4)
+#define  SD_SDMMC_DISABLED          SD_SDIO_DISABLED
+#define  SD_SDMMC_FUNCTION_BUSY     SD_SDIO_FUNCTION_BUSY     
+#define  SD_SDMMC_FUNCTION_FAILED   SD_SDIO_FUNCTION_FAILED   
+#define  SD_SDMMC_UNKNOWN_FUNCTION  SD_SDIO_UNKNOWN_FUNCTION  
+#define  SD_CMD_SDMMC_SEN_OP_COND   SD_CMD_SDIO_SEN_OP_COND   
+#define  SD_CMD_SDMMC_RW_DIRECT     SD_CMD_SDIO_RW_DIRECT     
+#define  SD_CMD_SDMMC_RW_EXTENDED   SD_CMD_SDIO_RW_EXTENDED   
+#define  __HAL_SD_SDMMC_ENABLE      __HAL_SD_SDIO_ENABLE      
+#define  __HAL_SD_SDMMC_DISABLE     __HAL_SD_SDIO_DISABLE     
+#define  __HAL_SD_SDMMC_DMA_ENABLE  __HAL_SD_SDIO_DMA_ENABLE  
+#define  __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL  
+#define  __HAL_SD_SDMMC_ENABLE_IT   __HAL_SD_SDIO_ENABLE_IT   
+#define  __HAL_SD_SDMMC_DISABLE_IT  __HAL_SD_SDIO_DISABLE_IT  
+#define  __HAL_SD_SDMMC_GET_FLAG    __HAL_SD_SDIO_GET_FLAG    
+#define  __HAL_SD_SDMMC_CLEAR_FLAG  __HAL_SD_SDIO_CLEAR_FLAG  
+#define  __HAL_SD_SDMMC_GET_IT      __HAL_SD_SDIO_GET_IT      
+#define  __HAL_SD_SDMMC_CLEAR_IT    __HAL_SD_SDIO_CLEAR_IT    
+#define  SDMMC_STATIC_FLAGS         SDIO_STATIC_FLAGS	       
+#define  SDMMC_CMD0TIMEOUT          SDIO_CMD0TIMEOUT	       
+#define  SD_SDMMC_SEND_IF_COND      SD_SDIO_SEND_IF_COND
+/* alias CMSIS */
+#define  SDMMC1_IRQn                SDIO_IRQn
+#define  SDMMC1_IRQHandler          SDIO_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define  SD_SDIO_DISABLED           SD_SDMMC_DISABLED
+#define  SD_SDIO_FUNCTION_BUSY      SD_SDMMC_FUNCTION_BUSY    
+#define  SD_SDIO_FUNCTION_FAILED    SD_SDMMC_FUNCTION_FAILED  
+#define  SD_SDIO_UNKNOWN_FUNCTION   SD_SDMMC_UNKNOWN_FUNCTION
+#define  SD_CMD_SDIO_SEN_OP_COND    SD_CMD_SDMMC_SEN_OP_COND
+#define  SD_CMD_SDIO_RW_DIRECT      SD_CMD_SDMMC_RW_DIRECT
+#define  SD_CMD_SDIO_RW_EXTENDED    SD_CMD_SDMMC_RW_EXTENDED
+#define  __HAL_SD_SDIO_ENABLE       __HAL_SD_SDMMC_ENABLE
+#define  __HAL_SD_SDIO_DISABLE      __HAL_SD_SDMMC_DISABLE
+#define  __HAL_SD_SDIO_DMA_ENABLE   __HAL_SD_SDMMC_DMA_ENABLE
+#define  __HAL_SD_SDIO_DMA_DISABL   __HAL_SD_SDMMC_DMA_DISABLE
+#define  __HAL_SD_SDIO_ENABLE_IT    __HAL_SD_SDMMC_ENABLE_IT
+#define  __HAL_SD_SDIO_DISABLE_IT   __HAL_SD_SDMMC_DISABLE_IT
+#define  __HAL_SD_SDIO_GET_FLAG     __HAL_SD_SDMMC_GET_FLAG
+#define  __HAL_SD_SDIO_CLEAR_FLAG   __HAL_SD_SDMMC_CLEAR_FLAG
+#define  __HAL_SD_SDIO_GET_IT       __HAL_SD_SDMMC_GET_IT
+#define  __HAL_SD_SDIO_CLEAR_IT     __HAL_SD_SDMMC_CLEAR_IT
+#define  SDIO_STATIC_FLAGS	        SDMMC_STATIC_FLAGS
+#define  SDIO_CMD0TIMEOUT	          SDMMC_CMD0TIMEOUT
+#define  SD_SDIO_SEND_IF_COND	      SD_SDMMC_SEND_IF_COND
+/* alias CMSIS for compatibilities */
+#define  SDIO_IRQn                  SDMMC1_IRQn
+#define  SDIO_IRQHandler            SDMMC1_IRQHandler
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __SMARTCARD_ENABLE_IT           __HAL_SMARTCARD_ENABLE_IT
+#define __SMARTCARD_DISABLE_IT          __HAL_SMARTCARD_DISABLE_IT
+#define __SMARTCARD_ENABLE              __HAL_SMARTCARD_ENABLE
+#define __SMARTCARD_DISABLE             __HAL_SMARTCARD_DISABLE
+#define __SMARTCARD_DMA_REQUEST_ENABLE  __HAL_SMARTCARD_DMA_REQUEST_ENABLE
+#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
+
+#define __HAL_SMARTCARD_GETCLOCKSOURCE  SMARTCARD_GETCLOCKSOURCE
+#define __SMARTCARD_GETCLOCKSOURCE      SMARTCARD_GETCLOCKSOURCE
+
+#define IS_SMARTCARD_ONEBIT_SAMPLING    IS_SMARTCARD_ONE_BIT_SAMPLE                  
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_SMBUS_RESET_CR1           SMBUS_RESET_CR1
+#define __HAL_SMBUS_RESET_CR2           SMBUS_RESET_CR2
+#define __HAL_SMBUS_GENERATE_START      SMBUS_GENERATE_START
+#define __HAL_SMBUS_GET_ADDR_MATCH      SMBUS_GET_ADDR_MATCH
+#define __HAL_SMBUS_GET_DIR             SMBUS_GET_DIR
+#define __HAL_SMBUS_GET_STOP_MODE       SMBUS_GET_STOP_MODE
+#define __HAL_SMBUS_GET_PEC_MODE        SMBUS_GET_PEC_MODE
+#define __HAL_SMBUS_GET_ALERT_ENABLED   SMBUS_GET_ALERT_ENABLED
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_SPI_1LINE_TX              SPI_1LINE_TX
+#define __HAL_SPI_1LINE_RX              SPI_1LINE_RX
+#define __HAL_SPI_RESET_CRC             SPI_RESET_CRC
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_UART_GETCLOCKSOURCE       UART_GETCLOCKSOURCE
+#define __HAL_UART_MASK_COMPUTATION     UART_MASK_COMPUTATION
+#define __UART_GETCLOCKSOURCE           UART_GETCLOCKSOURCE
+#define __UART_MASK_COMPUTATION         UART_MASK_COMPUTATION
+
+#define IS_UART_WAKEUPMETHODE           IS_UART_WAKEUPMETHOD
+
+#define IS_UART_ONEBIT_SAMPLE           IS_UART_ONE_BIT_SAMPLE                  
+#define IS_UART_ONEBIT_SAMPLING         IS_UART_ONE_BIT_SAMPLE                  
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __USART_ENABLE_IT               __HAL_USART_ENABLE_IT
+#define __USART_DISABLE_IT              __HAL_USART_DISABLE_IT
+#define __USART_ENABLE                  __HAL_USART_ENABLE
+#define __USART_DISABLE                 __HAL_USART_DISABLE
+
+#define __HAL_USART_GETCLOCKSOURCE      USART_GETCLOCKSOURCE
+#define __USART_GETCLOCKSOURCE          USART_GETCLOCKSOURCE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define USB_EXTI_LINE_WAKEUP                               USB_WAKEUP_EXTI_LINE
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE                    USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE                   USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE                      USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_FS_EXTI_LINE_WAKEUP                            USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE                    USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE                   USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE                      USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_HS_EXTI_LINE_WAKEUP                            USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_EXTI_ENABLE_IT                           __HAL_USB_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_EXTI_DISABLE_IT                          __HAL_USB_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_EXTI_GET_FLAG                            __HAL_USB_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_EXTI_CLEAR_FLAG                          __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER             __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER            __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER           __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT                        __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_FS_EXTI_DISABLE_IT                       __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_FS_EXTI_GET_FLAG                         __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG                       __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER          __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER         __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER        __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT                    __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT                        __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_HS_EXTI_DISABLE_IT                       __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_HS_EXTI_GET_FLAG                         __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG                       __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER          __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER         __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER        __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT                    __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define HAL_PCD_ActiveRemoteWakeup                         HAL_PCD_ActivateRemoteWakeup
+#define HAL_PCD_DeActiveRemoteWakeup                       HAL_PCD_DeActivateRemoteWakeup
+
+#define HAL_PCD_SetTxFiFo                                  HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo                                  HAL_PCDEx_SetRxFiFo
+/**
+  * @}
+  */
+
+/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_TIM_SetICPrescalerValue   TIM_SET_ICPRESCALERVALUE
+#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
+
+#define TIM_GET_ITSTATUS                __HAL_TIM_GET_IT_SOURCE
+#define TIM_GET_CLEAR_IT                __HAL_TIM_CLEAR_IT
+
+#define __HAL_TIM_GET_ITSTATUS          __HAL_TIM_GET_IT_SOURCE
+
+#define __HAL_TIM_DIRECTION_STATUS      __HAL_TIM_IS_TIM_COUNTING_DOWN
+#define __HAL_TIM_PRESCALER             __HAL_TIM_SET_PRESCALER
+#define __HAL_TIM_SetCounter            __HAL_TIM_SET_COUNTER
+#define __HAL_TIM_GetCounter            __HAL_TIM_GET_COUNTER
+#define __HAL_TIM_SetAutoreload         __HAL_TIM_SET_AUTORELOAD
+#define __HAL_TIM_GetAutoreload         __HAL_TIM_GET_AUTORELOAD
+#define __HAL_TIM_SetClockDivision      __HAL_TIM_SET_CLOCKDIVISION
+#define __HAL_TIM_GetClockDivision      __HAL_TIM_GET_CLOCKDIVISION
+#define __HAL_TIM_SetICPrescaler        __HAL_TIM_SET_ICPRESCALER
+#define __HAL_TIM_GetICPrescaler        __HAL_TIM_GET_ICPRESCALER
+#define __HAL_TIM_SetCompare            __HAL_TIM_SET_COMPARE
+#define __HAL_TIM_GetCompare            __HAL_TIM_GET_COMPARE
+
+#define TIM_TS_ITR0                        ((uint32_t)0x0000)
+#define TIM_TS_ITR1                        ((uint32_t)0x0010)
+#define TIM_TS_ITR2                        ((uint32_t)0x0020)
+#define TIM_TS_ITR3                        ((uint32_t)0x0030)
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+                                                      ((SELECTION) == TIM_TS_ITR1) || \
+                                                      ((SELECTION) == TIM_TS_ITR2) || \
+                                                      ((SELECTION) == TIM_TS_ITR3))
+
+#define TIM_CHANNEL_1                      ((uint32_t)0x0000)
+#define TIM_CHANNEL_2                      ((uint32_t)0x0004)
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                       ((CHANNEL) == TIM_CHANNEL_2))
+
+#define TIM_OUTPUTNSTATE_DISABLE            ((uint32_t)0x0000)
+#define TIM_OUTPUTNSTATE_ENABLE             (TIM_CCER_CC1NE)
+
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
+                                     ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
+
+#define TIM_OUTPUTSTATE_DISABLE            ((uint32_t)0x0000)
+#define TIM_OUTPUTSTATE_ENABLE             (TIM_CCER_CC1E)
+
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
+                                    ((STATE) == TIM_OUTPUTSTATE_ENABLE))  
+/**
+  * @}
+  */
+
+/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
+  * @{
+  */
+  
+#define __HAL_ETH_EXTI_ENABLE_IT                   __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_ETH_EXTI_DISABLE_IT                  __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_ETH_EXTI_GET_FLAG                    __HAL_ETH_WAKEUP_EXTI_GET_FLAG
+#define __HAL_ETH_EXTI_CLEAR_FLAG                  __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER     __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER    __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER   __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
+
+#define ETH_PROMISCIOUSMODE_ENABLE   ETH_PROMISCUOUS_MODE_ENABLE 
+#define ETH_PROMISCIOUSMODE_DISABLE  ETH_PROMISCUOUS_MODE_DISABLE
+#define IS_ETH_PROMISCIOUS_MODE      IS_ETH_PROMISCUOUS_MODE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_LTDC_LAYER LTDC_LAYER
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define SAI_OUTPUTDRIVE_DISABLED          SAI_OUTPUTDRIVE_DISABLE
+#define SAI_OUTPUTDRIVE_ENABLED           SAI_OUTPUTDRIVE_ENABLE
+#define SAI_MASTERDIVIDER_ENABLED         SAI_MASTERDIVIDER_ENABLE
+#define SAI_MASTERDIVIDER_DISABLED        SAI_MASTERDIVIDER_DISABLE
+#define SAI_STREOMODE                     SAI_STEREOMODE
+#define SAI_FIFOStatus_Empty              SAI_FIFOSTATUS_EMPTY              
+#define SAI_FIFOStatus_Less1QuarterFull   SAI_FIFOSTATUS_LESS1QUARTERFULL    
+#define SAI_FIFOStatus_1QuarterFull       SAI_FIFOSTATUS_1QUARTERFULL       
+#define SAI_FIFOStatus_HalfFull           SAI_FIFOSTATUS_HALFFULL           
+#define SAI_FIFOStatus_3QuartersFull      SAI_FIFOSTATUS_3QUARTERFULL       
+#define SAI_FIFOStatus_Full               SAI_FIFOSTATUS_FULL               
+#define IS_SAI_BLOCK_MONO_STREO_MODE     IS_SAI_BLOCK_MONO_STEREO_MODE
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+  
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32_HAL_LEGACY */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h
new file mode 100644
index 0000000..b341816
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h
@@ -0,0 +1,233 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   This file contains all the functions prototypes for the HAL
+  *          module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_H
+#define __STM32F4xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_conf.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HAL
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+  * @{
+  */
+
+/** @brief  Freeze/Unfreeze Peripherals in Debug mode
+  */
+#define __HAL_DBGMCU_FREEZE_TIM2()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM3()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM4()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM5()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM6()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM7()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM12()          (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM13()          (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM14()          (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_FREEZE_RTC()            (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_FREEZE_WWDG()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_IWDG()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT()   (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT()   (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT()   (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_CAN1()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_FREEZE_CAN2()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM1()           (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM8()           (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM9()           (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM10()          (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM11()          (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+#define __HAL_DBGMCU_UNFREEZE_TIM2()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM3()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM4()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM5()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM6()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM7()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM12()          (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM13()          (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM14()          (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_UNFREEZE_RTC()            (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_UNFREEZE_WWDG()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_IWDG()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT()   (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT()   (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT()   (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_CAN1()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_CAN2()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM1()           (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM8()           (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM9()           (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM10()          (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM11()          (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+/** @brief  Main Flash memory mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_FLASH()             (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
+
+/** @brief  System Flash memory mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                                         SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
+                                                        }while(0);
+
+/** @brief  Embedded SRAM mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_SRAM()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                                  SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
+                                                 }while(0);
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+/** @brief  FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_FSMC()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                                  SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+                                                 }while(0);
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/** @brief  FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                                 SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+                                                }while(0);
+
+/** @brief  FMC/SDRAM Bank 1 and 2 mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                                       SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
+                                                      }while(0);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions
+  * @{
+  */
+/** @addtogroup HAL_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+/**
+  * @}
+  */
+
+/** @addtogroup HAL_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions  ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+uint32_t HAL_GetTick(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+void HAL_DBGMCU_EnableDBGSleepMode(void);
+void HAL_DBGMCU_DisableDBGSleepMode(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+void HAL_EnableCompensationCell(void);
+void HAL_DisableCompensationCell(void);
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+void HAL_EnableMemorySwappingBank(void);
+void HAL_DisableMemorySwappingBank(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Private Variables
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Constants HAL Private Constants
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h
new file mode 100644
index 0000000..4758d85
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h
@@ -0,0 +1,766 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_adc.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of ADC HAL extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_ADC_H
+#define __STM32F4xx_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ADC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Types ADC Exported Types
+  * @{
+  */
+
+/**
+  * @brief HAL State structures definition
+  */
+typedef enum
+{
+  HAL_ADC_STATE_RESET                   = 0x00,    /*!< ADC not yet initialized or disabled */
+  HAL_ADC_STATE_READY                   = 0x01,    /*!< ADC peripheral ready for use */
+  HAL_ADC_STATE_BUSY                    = 0x02,    /*!< An internal process is ongoing */
+  HAL_ADC_STATE_BUSY_REG                = 0x12,    /*!< Regular conversion is ongoing */
+  HAL_ADC_STATE_BUSY_INJ                = 0x22,    /*!< Injected conversion is ongoing */
+  HAL_ADC_STATE_BUSY_INJ_REG            = 0x32,    /*!< Injected and regular conversion are ongoing */
+  HAL_ADC_STATE_TIMEOUT                 = 0x03,    /*!< Timeout state */
+  HAL_ADC_STATE_ERROR                   = 0x04,    /*!< ADC state error */
+  HAL_ADC_STATE_EOC                     = 0x05,    /*!< Conversion is completed */
+  HAL_ADC_STATE_EOC_REG                 = 0x15,    /*!< Regular conversion is completed */
+  HAL_ADC_STATE_EOC_INJ                 = 0x25,    /*!< Injected conversion is completed */
+  HAL_ADC_STATE_EOC_INJ_REG             = 0x35,    /*!< Injected and regular conversion are completed */
+  HAL_ADC_STATE_AWD                     = 0x06    /*!< ADC state analog watchdog */
+
+}HAL_ADC_StateTypeDef;
+
+/**
+  * @brief ADC Init structure definition
+  */
+typedef struct
+{
+  uint32_t ClockPrescaler;        /*!< Select the frequency of the clock to the ADC. The clock is common for
+                                       all the ADCs.
+                                       This parameter can be a value of @ref ADC_ClockPrescaler */
+  uint32_t Resolution;            /*!< Configures the ADC resolution dual mode.
+                                       This parameter can be a value of @ref ADC_Resolution */
+  uint32_t DataAlign;             /*!< Specifies whether the ADC data  alignment is left or right.
+                                       This parameter can be a value of @ref ADC_data_align */
+  uint32_t ScanConvMode;          /*!< Specifies whether the conversion is performed in Scan (multi channels) or
+                                       Single (one channel) mode.
+                                       This parameter can be set to ENABLE or DISABLE */
+  uint32_t EOCSelection;          /*!< Specifies whether the EOC flag is set
+                                       at the end of single channel conversion or at the end of all conversions.
+                                       This parameter can be a value of @ref ADC_EOCSelection
+                                       Note: Impact on overrun when not using DMA: When EOCSelection is set to ADC_EOC_SINGLE_CONV,
+                                       overrun detection is automatically enabled, in this case each conversion data must be read.
+                                       To perform ADC conversions without having to read all conversion data, this parameter must
+                                       be set to ADC_EOC_SEQ_CONV */
+  uint32_t ContinuousConvMode;    /*!< Specifies whether the conversion is performed in Continuous or Single mode.
+                                       This parameter can be set to ENABLE or DISABLE. */
+  uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests is performed in Continuous or in Single mode.
+                                       This parameter can be set to ENABLE or DISABLE. */
+  uint32_t NbrOfConversion;       /*!< Specifies the number of ADC conversions that will be done using the sequencer for
+                                       regular channel group.
+                                       This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
+  uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversion is performed in Discontinuous or not
+                                       for regular channels.
+                                       This parameter can be set to ENABLE or DISABLE. */
+  uint32_t NbrOfDiscConversion;   /*!< Specifies the number of ADC discontinuous conversions that will be done
+                                       using the sequencer for regular channel group.
+                                       This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+  uint32_t ExternalTrigConv;      /*!< Selects the external event used to trigger the conversion start of regular group.
+                                       If set to ADC_SOFTWARE_START, external triggers are disabled.
+                                       This parameter can be a value of @ref ADC_External_trigger_Source_Regular
+                                       Note: This parameter can be modified only if there is no conversion is ongoing. */
+  uint32_t ExternalTrigConvEdge;  /*!< Selects the external trigger edge of regular group.
+                                       If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
+                                       This parameter can be a value of @ref ADC_External_trigger_edge_Regular
+                                       Note: This parameter can be modified only if there is no conversion is ongoing. */
+}ADC_InitTypeDef;
+
+/**
+  * @brief ADC handle Structure definition
+  */
+typedef struct
+{
+  ADC_TypeDef                   *Instance;                   /*!< Register base address */
+
+  ADC_InitTypeDef               Init;                        /*!< ADC required parameters */
+
+  __IO uint32_t                 NbrOfCurrentConversionRank;  /*!< ADC number of current conversion rank */
+
+  DMA_HandleTypeDef             *DMA_Handle;                 /*!< Pointer DMA Handler */
+
+  HAL_LockTypeDef               Lock;                        /*!< ADC locking object */
+
+  __IO HAL_ADC_StateTypeDef     State;                       /*!< ADC communication state */
+
+  __IO uint32_t                 ErrorCode;                   /*!< ADC Error code */
+}ADC_HandleTypeDef;
+
+/**
+  * @brief ADC Configuration regular Channel structure definition
+  */
+typedef struct
+{
+  uint32_t Channel;        /*!< The ADC channel to configure.
+                                This parameter can be a value of @ref ADC_channels */
+  uint32_t Rank;           /*!< The rank in the regular group sequencer.
+                                This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+  uint32_t SamplingTime;   /*!< The sample time value to be set for the selected channel.
+                                This parameter can be a value of @ref ADC_sampling_times */
+  uint32_t Offset;         /*!< Reserved for future use, can be set to 0 */
+}ADC_ChannelConfTypeDef;
+
+/**
+  * @brief ADC Configuration multi-mode structure definition
+  */
+typedef struct
+{
+  uint32_t WatchdogMode;      /*!< Configures the ADC analog watchdog mode.
+                                   This parameter can be a value of @ref ADC_analog_watchdog_selection */
+  uint32_t HighThreshold;     /*!< Configures the ADC analog watchdog High threshold value.
+                                   This parameter must be a 12-bit value. */
+  uint32_t LowThreshold;      /*!< Configures the ADC analog watchdog High threshold value.
+                                   This parameter must be a 12-bit value. */
+  uint32_t Channel;           /*!< Configures ADC channel for the analog watchdog.
+                                   This parameter has an effect only if watchdog mode is configured on single channel
+                                   This parameter can be a value of @ref ADC_channels */
+  uint32_t ITMode;            /*!< Specifies whether the analog watchdog is configured
+                                   is interrupt mode or in polling mode.
+                                   This parameter can be set to ENABLE or DISABLE */
+  uint32_t WatchdogNumber;    /*!< Reserved for future use, can be set to 0 */
+}ADC_AnalogWDGConfTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADC_Exported_Constants ADC Exported Constants
+  * @{
+  */
+
+/** @defgroup ADC_Error_Code ADC Error Code
+  * @{
+  */
+#define HAL_ADC_ERROR_NONE        ((uint32_t)0x00)   /*!< No error             */
+#define HAL_ADC_ERROR_OVR         ((uint32_t)0x01)   /*!< OVR error            */
+#define HAL_ADC_ERROR_DMA         ((uint32_t)0x02)   /*!< DMA transfer error   */
+/**
+  * @}
+  */
+
+
+/** @defgroup ADC_ClockPrescaler  ADC Clock Prescaler
+  * @{
+  */
+#define ADC_CLOCKPRESCALER_PCLK_DIV2    ((uint32_t)0x00000000)
+#define ADC_CLOCKPRESCALER_PCLK_DIV4    ((uint32_t)ADC_CCR_ADCPRE_0)
+#define ADC_CLOCKPRESCALER_PCLK_DIV6    ((uint32_t)ADC_CCR_ADCPRE_1)
+#define ADC_CLOCKPRESCALER_PCLK_DIV8    ((uint32_t)ADC_CCR_ADCPRE)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_delay_between_2_sampling_phases ADC Delay Between 2 Sampling Phases
+  * @{
+  */
+#define ADC_TWOSAMPLINGDELAY_5CYCLES    ((uint32_t)0x00000000)
+#define ADC_TWOSAMPLINGDELAY_6CYCLES    ((uint32_t)ADC_CCR_DELAY_0)
+#define ADC_TWOSAMPLINGDELAY_7CYCLES    ((uint32_t)ADC_CCR_DELAY_1)
+#define ADC_TWOSAMPLINGDELAY_8CYCLES    ((uint32_t)(ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_9CYCLES    ((uint32_t)ADC_CCR_DELAY_2)
+#define ADC_TWOSAMPLINGDELAY_10CYCLES   ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_11CYCLES   ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_12CYCLES   ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_13CYCLES   ((uint32_t)ADC_CCR_DELAY_3)
+#define ADC_TWOSAMPLINGDELAY_14CYCLES   ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_15CYCLES   ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_16CYCLES   ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_17CYCLES   ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2))
+#define ADC_TWOSAMPLINGDELAY_18CYCLES   ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_19CYCLES   ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_20CYCLES   ((uint32_t)ADC_CCR_DELAY)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Resolution ADC Resolution
+  * @{
+  */
+#define ADC_RESOLUTION_12B  ((uint32_t)0x00000000)
+#define ADC_RESOLUTION_10B  ((uint32_t)ADC_CR1_RES_0)
+#define ADC_RESOLUTION_8B   ((uint32_t)ADC_CR1_RES_1)
+#define ADC_RESOLUTION_6B   ((uint32_t)ADC_CR1_RES)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_External_trigger_edge_Regular ADC External Trigger Edge Regular
+  * @{
+  */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE           ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING         ((uint32_t)ADC_CR2_EXTEN_0)
+#define ADC_EXTERNALTRIGCONVEDGE_FALLING        ((uint32_t)ADC_CR2_EXTEN_1)
+#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING  ((uint32_t)ADC_CR2_EXTEN)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_External_trigger_Source_Regular ADC External Trigger Source Regular
+  * @{
+  */
+/* Note: Parameter ADC_SOFTWARE_START is a software parameter used for        */
+/*       compatibility with other STM32 devices.                              */
+#define ADC_EXTERNALTRIGCONV_T1_CC1    ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONV_T1_CC2    ((uint32_t)ADC_CR2_EXTSEL_0)
+#define ADC_EXTERNALTRIGCONV_T1_CC3    ((uint32_t)ADC_CR2_EXTSEL_1)
+#define ADC_EXTERNALTRIGCONV_T2_CC2    ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T2_CC3    ((uint32_t)ADC_CR2_EXTSEL_2)
+#define ADC_EXTERNALTRIGCONV_T2_CC4    ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T2_TRGO   ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_T3_CC1    ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T3_TRGO   ((uint32_t)ADC_CR2_EXTSEL_3)
+#define ADC_EXTERNALTRIGCONV_T4_CC4    ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T5_CC1    ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_T5_CC2    ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T5_CC3    ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2))
+#define ADC_EXTERNALTRIGCONV_T8_CC1    ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T8_TRGO   ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_Ext_IT11  ((uint32_t)ADC_CR2_EXTSEL)
+#define ADC_SOFTWARE_START             ((uint32_t)ADC_CR2_EXTSEL + 1)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_data_align ADC Data Align
+  * @{
+  */
+#define ADC_DATAALIGN_RIGHT      ((uint32_t)0x00000000)
+#define ADC_DATAALIGN_LEFT       ((uint32_t)ADC_CR2_ALIGN)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_channels  ADC Common Channels
+  * @{
+  */
+#define ADC_CHANNEL_0           ((uint32_t)0x00000000)
+#define ADC_CHANNEL_1           ((uint32_t)ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_2           ((uint32_t)ADC_CR1_AWDCH_1)
+#define ADC_CHANNEL_3           ((uint32_t)(ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_4           ((uint32_t)ADC_CR1_AWDCH_2)
+#define ADC_CHANNEL_5           ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_6           ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_7           ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_8           ((uint32_t)ADC_CR1_AWDCH_3)
+#define ADC_CHANNEL_9           ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_10          ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_11          ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_12          ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2))
+#define ADC_CHANNEL_13          ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_14          ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_15          ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_16          ((uint32_t)ADC_CR1_AWDCH_4)
+#define ADC_CHANNEL_17          ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_18          ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1))
+
+#define ADC_CHANNEL_VREFINT     ((uint32_t)ADC_CHANNEL_17)
+#define ADC_CHANNEL_VBAT        ((uint32_t)ADC_CHANNEL_18)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_sampling_times  ADC Sampling Times
+  * @{
+  */
+#define ADC_SAMPLETIME_3CYCLES    ((uint32_t)0x00000000)
+#define ADC_SAMPLETIME_15CYCLES   ((uint32_t)ADC_SMPR1_SMP10_0)
+#define ADC_SAMPLETIME_28CYCLES   ((uint32_t)ADC_SMPR1_SMP10_1)
+#define ADC_SAMPLETIME_56CYCLES   ((uint32_t)(ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0))
+#define ADC_SAMPLETIME_84CYCLES   ((uint32_t)ADC_SMPR1_SMP10_2)
+#define ADC_SAMPLETIME_112CYCLES  ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0))
+#define ADC_SAMPLETIME_144CYCLES  ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1))
+#define ADC_SAMPLETIME_480CYCLES  ((uint32_t)ADC_SMPR1_SMP10)
+/**
+  * @}
+  */
+
+  /** @defgroup ADC_EOCSelection ADC EOC Selection
+  * @{
+  */
+#define ADC_EOC_SEQ_CONV              ((uint32_t)0x00000000)
+#define ADC_EOC_SINGLE_CONV           ((uint32_t)0x00000001)
+#define ADC_EOC_SINGLE_SEQ_CONV       ((uint32_t)0x00000002)  /*!< reserved for future use */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Event_type ADC Event Type
+  * @{
+  */
+#define ADC_AWD_EVENT             ((uint32_t)ADC_FLAG_AWD)
+#define ADC_OVR_EVENT             ((uint32_t)ADC_FLAG_OVR)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_analog_watchdog_selection ADC Analog Watchdog Selection
+  * @{
+  */
+#define ADC_ANALOGWATCHDOG_SINGLE_REG         ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC       ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC    ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG            ((uint32_t)ADC_CR1_AWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_INJEC          ((uint32_t)ADC_CR1_JAWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC       ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_NONE               ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_interrupts_definition ADC Interrupts Definition
+  * @{
+  */
+#define ADC_IT_EOC      ((uint32_t)ADC_CR1_EOCIE)
+#define ADC_IT_AWD      ((uint32_t)ADC_CR1_AWDIE)
+#define ADC_IT_JEOC     ((uint32_t)ADC_CR1_JEOCIE)
+#define ADC_IT_OVR      ((uint32_t)ADC_CR1_OVRIE)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_flags_definition ADC Flags Definition
+  * @{
+  */
+#define ADC_FLAG_AWD    ((uint32_t)ADC_SR_AWD)
+#define ADC_FLAG_EOC    ((uint32_t)ADC_SR_EOC)
+#define ADC_FLAG_JEOC   ((uint32_t)ADC_SR_JEOC)
+#define ADC_FLAG_JSTRT  ((uint32_t)ADC_SR_JSTRT)
+#define ADC_FLAG_STRT   ((uint32_t)ADC_SR_STRT)
+#define ADC_FLAG_OVR    ((uint32_t)ADC_SR_OVR)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_channels_type ADC Channels Type
+  * @{
+  */
+#define ADC_ALL_CHANNELS      ((uint32_t)0x00000001)
+#define ADC_REGULAR_CHANNELS  ((uint32_t)0x00000002) /*!< reserved for future use */
+#define ADC_INJECTED_CHANNELS ((uint32_t)0x00000003) /*!< reserved for future use */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+  * @{
+  */
+
+/** @brief Reset ADC handle state
+  * @param  __HANDLE__: ADC handle
+  * @retval None
+  */
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+
+/**
+  * @brief  Enable the ADC peripheral.
+  * @param  __HANDLE__: ADC handle
+  * @retval None
+  */
+#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 |=  ADC_CR2_ADON)
+
+/**
+  * @brief  Disable the ADC peripheral.
+  * @param  __HANDLE__: ADC handle
+  * @retval None
+  */
+#define __HAL_ADC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 &=  ~ADC_CR2_ADON)
+
+/**
+  * @brief  Enable the ADC end of conversion interrupt.
+  * @param  __HANDLE__: specifies the ADC Handle.
+  * @param  __INTERRUPT__: ADC Interrupt.
+  * @retval None
+  */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the ADC end of conversion interrupt.
+  * @param  __HANDLE__: specifies the ADC Handle.
+  * @param  __INTERRUPT__: ADC interrupt.
+  * @retval None
+  */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__))
+
+/** @brief  Check if the specified ADC interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the ADC Handle.
+  * @param  __INTERRUPT__: specifies the ADC interrupt source to check.
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)  (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @brief  Clear the ADC's pending flags.
+  * @param  __HANDLE__: specifies the ADC Handle.
+  * @param  __FLAG__: ADC flag.
+  * @retval None
+  */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+  * @brief  Get the selected ADC's flag status.
+  * @param  __HANDLE__: specifies the ADC Handle.
+  * @param  __FLAG__: ADC flag.
+  * @retval None
+  */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+  * @}
+  */
+
+/* Include ADC HAL Extension module */
+#include "stm32f4xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup ADC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions ***********************************/
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+/**
+  * @}
+  */
+
+/** @addtogroup ADC_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+/**
+  * @}
+  */
+
+/** @addtogroup ADC_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+/**
+  * @}
+  */
+
+/** @addtogroup ADC_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral State functions ***************************************************/
+HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup ADC_Private_Constants ADC Private Constants
+  * @{
+  */
+/* Delay for ADC stabilization time.                                        */
+/* Maximum delay is 1us (refer to device datasheet, parameter tSTAB).       */
+/* Unit: us                                                                 */
+#define ADC_STAB_DELAY_US               ((uint32_t) 3)
+/* Delay for temperature sensor stabilization time.                         */
+/* Maximum delay is 10us (refer to device datasheet, parameter tSTART).     */
+/* Unit: us                                                                 */
+#define ADC_TEMPSENSOR_DELAY_US         ((uint32_t) 10)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup ADC_Private_Macros ADC Private Macros
+  * @{
+  */
+#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK)     (((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV2) || \
+                                              ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV4) || \
+                                              ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV6) || \
+                                              ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV8))
+#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TWOSAMPLINGDELAY_5CYCLES)  || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_6CYCLES)  || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_7CYCLES)  || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_8CYCLES)  || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_9CYCLES)  || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_12CYCLES) || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_13CYCLES) || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_14CYCLES) || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_15CYCLES) || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_16CYCLES) || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_17CYCLES) || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_18CYCLES) || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_19CYCLES) || \
+                                      ((DELAY) == ADC_TWOSAMPLINGDELAY_20CYCLES))
+#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \
+                                       ((RESOLUTION) == ADC_RESOLUTION_10B) || \
+                                       ((RESOLUTION) == ADC_RESOLUTION_8B)  || \
+                                       ((RESOLUTION) == ADC_RESOLUTION_6B))
+#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE)    || \
+                                    ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING)  || \
+                                    ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
+                                    ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING))
+#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1)  || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2)  || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3)  || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2)  || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3)  || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC4)  || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1)  || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4)  || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1)  || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC2)  || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3)  || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1)  || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
+                                  ((REGTRIG) == ADC_EXTERNALTRIGCONV_Ext_IT11)|| \
+                                  ((REGTRIG) == ADC_SOFTWARE_START))
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+                                  ((ALIGN) == ADC_DATAALIGN_LEFT))
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_3CYCLES)   || \
+                                  ((TIME) == ADC_SAMPLETIME_15CYCLES)  || \
+                                  ((TIME) == ADC_SAMPLETIME_28CYCLES)  || \
+                                  ((TIME) == ADC_SAMPLETIME_56CYCLES)  || \
+                                  ((TIME) == ADC_SAMPLETIME_84CYCLES)  || \
+                                  ((TIME) == ADC_SAMPLETIME_112CYCLES) || \
+                                  ((TIME) == ADC_SAMPLETIME_144CYCLES) || \
+                                  ((TIME) == ADC_SAMPLETIME_480CYCLES))
+#define IS_ADC_EOCSelection(EOCSelection) (((EOCSelection) == ADC_EOC_SINGLE_CONV)   || \
+                                           ((EOCSelection) == ADC_EOC_SEQ_CONV)  || \
+                                           ((EOCSelection) == ADC_EOC_SINGLE_SEQ_CONV))
+#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_AWD_EVENT) || \
+                                  ((EVENT) == ADC_OVR_EVENT))
+#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG)        || \
+                                          ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC)      || \
+                                          ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC)   || \
+                                          ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG)           || \
+                                          ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC)         || \
+                                          ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC)      || \
+                                          ((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE))
+#define IS_ADC_CHANNELS_TYPE(CHANNEL_TYPE) (((CHANNEL_TYPE) == ADC_ALL_CHANNELS) || \
+                                            ((CHANNEL_TYPE) == ADC_REGULAR_CHANNELS) || \
+                                            ((CHANNEL_TYPE) == ADC_INJECTED_CHANNELS))
+#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= ((uint32_t)0xFFF))
+
+#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)16)))
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)16)))
+#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= ((uint32_t)1)) && ((NUMBER) <= ((uint32_t)8)))
+#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE)                                     \
+   ((((RESOLUTION) == ADC_RESOLUTION_12B) && ((ADC_VALUE) <= ((uint32_t)0x0FFF))) || \
+    (((RESOLUTION) == ADC_RESOLUTION_10B) && ((ADC_VALUE) <= ((uint32_t)0x03FF))) || \
+    (((RESOLUTION) == ADC_RESOLUTION_8B)  && ((ADC_VALUE) <= ((uint32_t)0x00FF))) || \
+    (((RESOLUTION) == ADC_RESOLUTION_6B)  && ((ADC_VALUE) <= ((uint32_t)0x003F))))
+
+/**
+  * @brief  Set ADC Regular channel sequence length.
+  * @param  _NbrOfConversion_: Regular channel sequence length.
+  * @retval None
+  */
+#define ADC_SQR1(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1) << 20)
+
+/**
+  * @brief  Set the ADC's sample time for channel numbers between 10 and 18.
+  * @param  _SAMPLETIME_: Sample time parameter.
+  * @param  _CHANNELNB_: Channel number.
+  * @retval None
+  */
+#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (((uint32_t)((uint16_t)(_CHANNELNB_))) - 10)))
+
+/**
+  * @brief  Set the ADC's sample time for channel numbers between 0 and 9.
+  * @param  _SAMPLETIME_: Sample time parameter.
+  * @param  _CHANNELNB_: Channel number.
+  * @retval None
+  */
+#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((uint32_t)((uint16_t)(_CHANNELNB_)))))
+
+/**
+  * @brief  Set the selected regular channel rank for rank between 1 and 6.
+  * @param  _CHANNELNB_: Channel number.
+  * @param  _RANKNB_: Rank number.
+  * @retval None
+  */
+#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 1)))
+
+/**
+  * @brief  Set the selected regular channel rank for rank between 7 and 12.
+  * @param  _CHANNELNB_: Channel number.
+  * @param  _RANKNB_: Rank number.
+  * @retval None
+  */
+#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 7)))
+
+/**
+  * @brief  Set the selected regular channel rank for rank between 13 and 16.
+  * @param  _CHANNELNB_: Channel number.
+  * @param  _RANKNB_: Rank number.
+  * @retval None
+  */
+#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 13)))
+
+/**
+  * @brief  Enable ADC continuous conversion mode.
+  * @param  _CONTINUOUS_MODE_: Continuous mode.
+  * @retval None
+  */
+#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1)
+
+/**
+  * @brief  Configures the number of discontinuous conversions for the regular group channels.
+  * @param  _NBR_DISCONTINUOUSCONV_: Number of discontinuous conversions.
+  * @retval None
+  */
+#define ADC_CR1_DISCONTINUOUS(_NBR_DISCONTINUOUSCONV_) (((_NBR_DISCONTINUOUSCONV_) - 1) << POSITION_VAL(ADC_CR1_DISCNUM))
+
+/**
+  * @brief  Enable ADC scan mode.
+  * @param  _SCANCONV_MODE_: Scan conversion mode.
+  * @retval None
+  */
+#define ADC_CR1_SCANCONV(_SCANCONV_MODE_) ((_SCANCONV_MODE_) << 8)
+
+/**
+  * @brief  Enable the ADC end of conversion selection.
+  * @param  _EOCSelection_MODE_: End of conversion selection mode.
+  * @retval None
+  */
+#define ADC_CR2_EOCSelection(_EOCSelection_MODE_) ((_EOCSelection_MODE_) << 10)
+
+/**
+  * @brief  Enable the ADC DMA continuous request.
+  * @param  _DMAContReq_MODE_: DMA continuous request mode.
+  * @retval None
+  */
+#define ADC_CR2_DMAContReq(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 9)
+
+/**
+  * @brief Return resolution bits in CR1 register.
+  * @param __HANDLE__: ADC handle
+  * @retval None
+  */
+#define ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CR1) & ADC_CR1_RES)
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup ADC_Private_Functions ADC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_ADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h
new file mode 100644
index 0000000..2c05c97
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h
@@ -0,0 +1,352 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_adc_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of ADC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_ADC_EX_H
+#define __STM32F4xx_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ADCEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Types ADC Exported Types
+  * @{
+  */
+
+/**
+  * @brief ADC Configuration injected Channel structure definition
+  */
+typedef struct
+{
+  uint32_t InjectedChannel;                /*!< Configure the ADC injected channel.
+                                                This parameter can be a value of @ref ADC_channels */
+  uint32_t InjectedRank;                   /*!< The rank in the injected group sequencer
+                                                This parameter must be a number between Min_Data = 1 and Max_Data = 4. */
+  uint32_t InjectedSamplingTime;           /*!< The sample time value to be set for the selected channel.
+                                                This parameter can be a value of @ref ADC_sampling_times */
+  uint32_t InjectedOffset;                 /*!< Defines the offset to be subtracted from the raw converted data when convert injected channels.
+                                                This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+  uint32_t InjectedNbrOfConversion;        /*!< Specifies the number of ADC conversions that will be done using the sequencer for
+                                                injected channel group.
+                                                This parameter must be a number between Min_Data = 1 and Max_Data = 4. */
+  uint32_t AutoInjectedConv;               /*!< Enables or disables the selected ADC automatic injected group
+                                                conversion after regular one */
+  uint32_t InjectedDiscontinuousConvMode;  /*!< Specifies whether the conversion is performed in Discontinuous mode or not for injected channels.
+                                                This parameter can be set to ENABLE or DISABLE. */
+  uint32_t ExternalTrigInjecConvEdge;      /*!< Select the external trigger edge and enable the trigger of an injected channels.
+                                                This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected */
+  uint32_t ExternalTrigInjecConv;          /*!< Select the external event used to trigger the start of conversion of a injected channels.
+                                                This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected */
+}ADC_InjectionConfTypeDef;
+
+/**
+  * @brief ADC Configuration multi-mode structure definition
+  */
+typedef struct
+{
+  uint32_t Mode;              /*!< Configures the ADC to operate in independent or multi mode.
+                                   This parameter can be a value of @ref ADCEx_Common_mode */
+  uint32_t DMAAccessMode;     /*!< Configures the Direct memory access mode for multi ADC mode.
+                                   This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */
+  uint32_t TwoSamplingDelay;  /*!< Configures the Delay between 2 sampling phases.
+                                   This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */
+}ADC_MultiModeTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Constants ADC Exported Constants
+  * @{
+  */
+
+/** @defgroup ADCEx_Common_mode ADC Common Mode
+  * @{
+  */
+#define ADC_MODE_INDEPENDENT                  ((uint32_t)0x00000000)
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT    ((uint32_t)ADC_CCR_MULTI_0)
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG      ((uint32_t)ADC_CCR_MULTI_1)
+#define ADC_DUALMODE_INJECSIMULT              ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_REGSIMULT                ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_DUALMODE_INTERL                   ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_ALTERTRIG                ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT  ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig    ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INJECSIMULT            ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT              ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INTERL                 ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_ALTERTRIG              ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode ADC Direct Memory Access Mode For Multi Mode
+  * @{
+  */
+#define ADC_DMAACCESSMODE_DISABLED  ((uint32_t)0x00000000)     /*!< DMA mode disabled */
+#define ADC_DMAACCESSMODE_1         ((uint32_t)ADC_CCR_DMA_0)  /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/
+#define ADC_DMAACCESSMODE_2         ((uint32_t)ADC_CCR_DMA_1)  /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/
+#define ADC_DMAACCESSMODE_3         ((uint32_t)ADC_CCR_DMA)    /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected ADC External Trigger Edge Injected
+  * @{
+  */
+#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE           ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING         ((uint32_t)ADC_CR2_JEXTEN_0)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING        ((uint32_t)ADC_CR2_JEXTEN_1)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING  ((uint32_t)ADC_CR2_JEXTEN)
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_External_trigger_Source_Injected ADC External Trigger Source Injected
+  * @{
+  */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4           ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO          ((uint32_t)ADC_CR2_JEXTSEL_0)
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1           ((uint32_t)ADC_CR2_JEXTSEL_1)
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO          ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC2           ((uint32_t)ADC_CR2_JEXTSEL_2)
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4           ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC1           ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC2           ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC3           ((uint32_t)ADC_CR2_JEXTSEL_3)
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO          ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T5_CC4           ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO          ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC2           ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC3           ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4           ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15         ((uint32_t)ADC_CR2_JEXTSEL)
+#define ADC_INJECTED_SOFTWARE_START                ((uint32_t)ADC_CR2_JEXTSEL + 1)
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_injected_channel_selection ADC Injected Channel Selection
+  * @{
+  */
+#define ADC_INJECTED_RANK_1    ((uint32_t)0x00000001)
+#define ADC_INJECTED_RANK_2    ((uint32_t)0x00000002)
+#define ADC_INJECTED_RANK_3    ((uint32_t)0x00000003)
+#define ADC_INJECTED_RANK_4    ((uint32_t)0x00000004)
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_channels  ADC Specific Channels
+  * @{
+  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define ADC_CHANNEL_TEMPSENSOR  ((uint32_t)ADC_CHANNEL_16)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+#define ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT ((uint32_t)0x10000000) /* Dummy bit for driver internal usage, not used in ADC channel setting registers CR1 or SQRx */
+#define ADC_CHANNEL_TEMPSENSOR  ((uint32_t)ADC_CHANNEL_18 | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup ADCEx_Exported_Functions_Group1
+  * @{
+  */
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc);
+void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Constants ADC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Macros ADC Private Macros
+  * @{
+  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define IS_ADC_CHANNEL(CHANNEL) ((CHANNEL) <= ADC_CHANNEL_18)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) <= ADC_CHANNEL_18)  || \
+                                 ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT)                 || \
+                           ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT)   || \
+                           ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG)     || \
+                           ((MODE) == ADC_DUALMODE_INJECSIMULT)             || \
+                           ((MODE) == ADC_DUALMODE_REGSIMULT)               || \
+                           ((MODE) == ADC_DUALMODE_INTERL)                  || \
+                           ((MODE) == ADC_DUALMODE_ALTERTRIG)               || \
+                           ((MODE) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \
+                           ((MODE) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig)   || \
+                           ((MODE) == ADC_TRIPLEMODE_INJECSIMULT)           || \
+                           ((MODE) == ADC_TRIPLEMODE_REGSIMULT)             || \
+                           ((MODE) == ADC_TRIPLEMODE_INTERL)                || \
+                           ((MODE) == ADC_TRIPLEMODE_ALTERTRIG))
+#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \
+                                      ((MODE) == ADC_DMAACCESSMODE_1)        || \
+                                      ((MODE) == ADC_DMAACCESSMODE_2)        || \
+                                      ((MODE) == ADC_DMAACCESSMODE_3))
+#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE)    || \
+                                          ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING)  || \
+                                          ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \
+                                          ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING))
+#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC2)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC3)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4)  || \
+                                        ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15)|| \
+                                        ((INJTRIG) == ADC_INJECTED_SOFTWARE_START))
+#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)4)))
+#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)4)))
+
+/**
+  * @brief  Set the selected injected Channel rank.
+  * @param  _CHANNELNB_: Channel number.
+  * @param  _RANKNB_: Rank number.
+  * @param  _JSQR_JL_: Sequence length.
+  * @retval None
+  */
+#define   ADC_JSQR(_CHANNELNB_, _RANKNB_, _JSQR_JL_)  (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * (uint8_t)(((_RANKNB_) + 3) - (_JSQR_JL_))))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Functions ADC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h
new file mode 100644
index 0000000..48e847c
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h
@@ -0,0 +1,775 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_can.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of CAN HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CAN_H
+#define __STM32F4xx_HAL_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+	defined(STM32F446xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CAN
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_CAN_STATE_RESET             = 0x00,  /*!< CAN not yet initialized or disabled */
+  HAL_CAN_STATE_READY             = 0x01,  /*!< CAN initialized and ready for use   */
+  HAL_CAN_STATE_BUSY              = 0x02,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_TX           = 0x12,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_RX           = 0x22,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_TX_RX        = 0x32,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_TIMEOUT           = 0x03,  /*!< Timeout state                       */
+  HAL_CAN_STATE_ERROR             = 0x04   /*!< CAN error state                     */
+
+}HAL_CAN_StateTypeDef;
+
+/**
+  * @brief  CAN init structure definition
+  */
+typedef struct
+{
+  uint32_t Prescaler;  /*!< Specifies the length of a time quantum.
+                            This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
+
+  uint32_t Mode;       /*!< Specifies the CAN operating mode.
+                            This parameter can be a value of @ref CAN_operating_mode */
+
+  uint32_t SJW;        /*!< Specifies the maximum number of time quanta
+                            the CAN hardware is allowed to lengthen or
+                            shorten a bit to perform resynchronization.
+                            This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+  uint32_t BS1;        /*!< Specifies the number of time quanta in Bit Segment 1.
+                            This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+  uint32_t BS2;        /*!< Specifies the number of time quanta in Bit Segment 2.
+                            This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+  uint32_t TTCM;       /*!< Enable or disable the time triggered communication mode.
+                            This parameter can be set to ENABLE or DISABLE. */
+
+  uint32_t ABOM;       /*!< Enable or disable the automatic bus-off management.
+                            This parameter can be set to ENABLE or DISABLE */
+
+  uint32_t AWUM;       /*!< Enable or disable the automatic wake-up mode.
+                            This parameter can be set to ENABLE or DISABLE */
+
+  uint32_t NART;       /*!< Enable or disable the non-automatic retransmission mode.
+                            This parameter can be set to ENABLE or DISABLE */
+
+  uint32_t RFLM;       /*!< Enable or disable the receive FIFO Locked mode.
+                            This parameter can be set to ENABLE or DISABLE */
+
+  uint32_t TXFP;       /*!< Enable or disable the transmit FIFO priority.
+                            This parameter can be set to ENABLE or DISABLE */
+}CAN_InitTypeDef;
+
+/**
+  * @brief  CAN filter configuration structure definition
+  */
+typedef struct
+{
+  uint32_t FilterIdHigh;          /*!< Specifies the filter identification number (MSBs for a 32-bit
+                                       configuration, first one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t FilterIdLow;           /*!< Specifies the filter identification number (LSBs for a 32-bit
+                                       configuration, second one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t FilterMaskIdHigh;      /*!< Specifies the filter mask number or identification number,
+                                       according to the mode (MSBs for a 32-bit configuration,
+                                       first one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t FilterMaskIdLow;       /*!< Specifies the filter mask number or identification number,
+                                       according to the mode (LSBs for a 32-bit configuration,
+                                       second one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t FilterFIFOAssignment;  /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+                                       This parameter can be a value of @ref CAN_filter_FIFO */
+
+  uint32_t FilterNumber;          /*!< Specifies the filter which will be initialized.
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 27 */
+
+  uint32_t FilterMode;            /*!< Specifies the filter mode to be initialized.
+                                       This parameter can be a value of @ref CAN_filter_mode */
+
+  uint32_t FilterScale;           /*!< Specifies the filter scale.
+                                       This parameter can be a value of @ref CAN_filter_scale */
+
+  uint32_t FilterActivation;      /*!< Enable or disable the filter.
+                                       This parameter can be set to ENABLE or DISABLE. */
+
+  uint32_t BankNumber;            /*!< Select the start slave bank filter.
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 28 */
+
+}CAN_FilterConfTypeDef;
+
+/**
+  * @brief  CAN Tx message structure definition
+  */
+typedef struct
+{
+  uint32_t StdId;    /*!< Specifies the standard identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+  uint32_t ExtId;    /*!< Specifies the extended identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
+  uint32_t IDE;      /*!< Specifies the type of identifier for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_Identifier_Type */
+
+  uint32_t RTR;      /*!< Specifies the type of frame for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_remote_transmission_request */
+
+  uint32_t DLC;      /*!< Specifies the length of the frame that will be transmitted.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+  uint8_t Data[8];   /*!< Contains the data to be transmitted.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+}CanTxMsgTypeDef;
+
+/**
+  * @brief  CAN Rx message structure definition
+  */
+typedef struct
+{
+  uint32_t StdId;       /*!< Specifies the standard identifier.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+  uint32_t ExtId;       /*!< Specifies the extended identifier.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
+  uint32_t IDE;         /*!< Specifies the type of identifier for the message that will be received.
+                             This parameter can be a value of @ref CAN_Identifier_Type */
+
+  uint32_t RTR;         /*!< Specifies the type of frame for the received message.
+                             This parameter can be a value of @ref CAN_remote_transmission_request */
+
+  uint32_t DLC;         /*!< Specifies the length of the frame that will be received.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+  uint8_t Data[8];      /*!< Contains the data to be received.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+  uint32_t FMI;         /*!< Specifies the index of the filter the message stored in the mailbox passes through.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+  uint32_t FIFONumber;  /*!< Specifies the receive FIFO number.
+                             This parameter can be CAN_FIFO0 or CAN_FIFO1 */
+
+}CanRxMsgTypeDef;
+
+/**
+  * @brief  CAN handle Structure definition
+  */
+typedef struct
+{
+  CAN_TypeDef                 *Instance;  /*!< Register base address          */
+
+  CAN_InitTypeDef             Init;       /*!< CAN required parameters        */
+
+  CanTxMsgTypeDef*            pTxMsg;     /*!< Pointer to transmit structure  */
+
+  CanRxMsgTypeDef*            pRxMsg;     /*!< Pointer to reception structure */
+
+  __IO HAL_CAN_StateTypeDef   State;      /*!< CAN communication state        */
+
+  HAL_LockTypeDef             Lock;       /*!< CAN locking object             */
+
+  __IO uint32_t               ErrorCode;  /*!< CAN Error code                 */
+
+}CAN_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
+  * @{
+  */
+
+/** @defgroup HAL_CAN_Error_Code HAL CAN Error Code
+  * @{
+  */
+#define   HAL_CAN_ERROR_NONE      0x00    /*!< No error             */
+#define   HAL_CAN_ERROR_EWG       0x01    /*!< EWG error            */
+#define   HAL_CAN_ERROR_EPV       0x02    /*!< EPV error            */
+#define   HAL_CAN_ERROR_BOF       0x04    /*!< BOF error            */
+#define   HAL_CAN_ERROR_STF       0x08    /*!< Stuff error          */
+#define   HAL_CAN_ERROR_FOR       0x10    /*!< Form error           */
+#define   HAL_CAN_ERROR_ACK       0x20    /*!< Acknowledgment error */
+#define   HAL_CAN_ERROR_BR        0x40    /*!< Bit recessive        */
+#define   HAL_CAN_ERROR_BD        0x80    /*!< LEC dominant         */
+#define   HAL_CAN_ERROR_CRC       0x100   /*!< LEC transfer error   */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_InitStatus CAN InitStatus
+  * @{
+  */
+#define CAN_INITSTATUS_FAILED       ((uint8_t)0x00)  /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS      ((uint8_t)0x01)  /*!< CAN initialization OK */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_operating_mode CAN Operating Mode
+  * @{
+  */
+#define CAN_MODE_NORMAL             ((uint32_t)0x00000000)                     /*!< Normal mode   */
+#define CAN_MODE_LOOPBACK           ((uint32_t)CAN_BTR_LBKM)                   /*!< Loopback mode */
+#define CAN_MODE_SILENT             ((uint32_t)CAN_BTR_SILM)                   /*!< Silent mode   */
+#define CAN_MODE_SILENT_LOOPBACK    ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM))  /*!< Loopback combined with silent mode */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_synchronisation_jump_width CAN Synchronisation Jump Width
+  * @{
+  */
+#define CAN_SJW_1TQ                 ((uint32_t)0x00000000)     /*!< 1 time quantum */
+#define CAN_SJW_2TQ                 ((uint32_t)CAN_BTR_SJW_0)  /*!< 2 time quantum */
+#define CAN_SJW_3TQ                 ((uint32_t)CAN_BTR_SJW_1)  /*!< 3 time quantum */
+#define CAN_SJW_4TQ                 ((uint32_t)CAN_BTR_SJW)    /*!< 4 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in bit segment 1
+  * @{
+  */
+#define CAN_BS1_1TQ                 ((uint32_t)0x00000000)                                       /*!< 1 time quantum  */
+#define CAN_BS1_2TQ                 ((uint32_t)CAN_BTR_TS1_0)                                    /*!< 2 time quantum  */
+#define CAN_BS1_3TQ                 ((uint32_t)CAN_BTR_TS1_1)                                    /*!< 3 time quantum  */
+#define CAN_BS1_4TQ                 ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0))                  /*!< 4 time quantum  */
+#define CAN_BS1_5TQ                 ((uint32_t)CAN_BTR_TS1_2)                                    /*!< 5 time quantum  */
+#define CAN_BS1_6TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0))                  /*!< 6 time quantum  */
+#define CAN_BS1_7TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1))                  /*!< 7 time quantum  */
+#define CAN_BS1_8TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0))  /*!< 8 time quantum  */
+#define CAN_BS1_9TQ                 ((uint32_t)CAN_BTR_TS1_3)                                    /*!< 9 time quantum  */
+#define CAN_BS1_10TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0))                  /*!< 10 time quantum */
+#define CAN_BS1_11TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1))                  /*!< 11 time quantum */
+#define CAN_BS1_12TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0))  /*!< 12 time quantum */
+#define CAN_BS1_13TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2))                  /*!< 13 time quantum */
+#define CAN_BS1_14TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0))  /*!< 14 time quantum */
+#define CAN_BS1_15TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1))  /*!< 15 time quantum */
+#define CAN_BS1_16TQ                ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in bit segment 2
+  * @{
+  */
+#define CAN_BS2_1TQ                 ((uint32_t)0x00000000)                       /*!< 1 time quantum */
+#define CAN_BS2_2TQ                 ((uint32_t)CAN_BTR_TS2_0)                    /*!< 2 time quantum */
+#define CAN_BS2_3TQ                 ((uint32_t)CAN_BTR_TS2_1)                    /*!< 3 time quantum */
+#define CAN_BS2_4TQ                 ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0))  /*!< 4 time quantum */
+#define CAN_BS2_5TQ                 ((uint32_t)CAN_BTR_TS2_2)                    /*!< 5 time quantum */
+#define CAN_BS2_6TQ                 ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0))  /*!< 6 time quantum */
+#define CAN_BS2_7TQ                 ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1))  /*!< 7 time quantum */
+#define CAN_BS2_8TQ                 ((uint32_t)CAN_BTR_TS2)                      /*!< 8 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_mode  CAN Filter Mode
+  * @{
+  */
+#define CAN_FILTERMODE_IDMASK       ((uint8_t)0x00)  /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST       ((uint8_t)0x01)  /*!< Identifier list mode */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_scale CAN Filter Scale
+  * @{
+  */
+#define CAN_FILTERSCALE_16BIT       ((uint8_t)0x00)  /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT       ((uint8_t)0x01)  /*!< One 32-bit filter  */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_FIFO CAN Filter FIFO
+  * @{
+  */
+#define CAN_FILTER_FIFO0             ((uint8_t)0x00)  /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1             ((uint8_t)0x01)  /*!< Filter FIFO 1 assignment for filter x */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Identifier_Type CAN Identifier Type
+  * @{
+  */
+#define CAN_ID_STD             ((uint32_t)0x00000000)  /*!< Standard Id */
+#define CAN_ID_EXT             ((uint32_t)0x00000004)  /*!< Extended Id */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
+  * @{
+  */
+#define CAN_RTR_DATA                ((uint32_t)0x00000000)  /*!< Data frame */
+#define CAN_RTR_REMOTE              ((uint32_t)0x00000002)  /*!< Remote frame */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number Constants
+  * @{
+  */
+#define CAN_FIFO0                   ((uint8_t)0x00)  /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1                   ((uint8_t)0x01)  /*!< CAN FIFO 1 used to receive */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_flags CAN Flags
+  * @{
+  */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+   and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+   CAN_GetFlagStatus() function.  */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0             ((uint32_t)0x00000500)  /*!< Request MailBox0 flag         */
+#define CAN_FLAG_RQCP1             ((uint32_t)0x00000508)  /*!< Request MailBox1 flag         */
+#define CAN_FLAG_RQCP2             ((uint32_t)0x00000510)  /*!< Request MailBox2 flag         */
+#define CAN_FLAG_TXOK0             ((uint32_t)0x00000501)  /*!< Transmission OK MailBox0 flag */
+#define CAN_FLAG_TXOK1             ((uint32_t)0x00000509)  /*!< Transmission OK MailBox1 flag */
+#define CAN_FLAG_TXOK2             ((uint32_t)0x00000511)  /*!< Transmission OK MailBox2 flag */
+#define CAN_FLAG_TME0              ((uint32_t)0x0000051A)  /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1              ((uint32_t)0x0000051B)  /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME2              ((uint32_t)0x0000051C)  /*!< Transmit mailbox 0 empty flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0               ((uint32_t)0x00000203)  /*!< FIFO 0 Full flag    */
+#define CAN_FLAG_FOV0              ((uint32_t)0x00000204)  /*!< FIFO 0 Overrun flag */
+
+#define CAN_FLAG_FF1               ((uint32_t)0x00000403)  /*!< FIFO 1 Full flag    */
+#define CAN_FLAG_FOV1              ((uint32_t)0x00000404)  /*!< FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU               ((uint32_t)0x00000103)  /*!< Wake up flag           */
+#define CAN_FLAG_SLAK              ((uint32_t)0x00000101)  /*!< Sleep acknowledge flag */
+#define CAN_FLAG_SLAKI             ((uint32_t)0x00000104)  /*!< Sleep acknowledge flag */
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+         In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG               ((uint32_t)0x00000300)  /*!< Error warning flag   */
+#define CAN_FLAG_EPV               ((uint32_t)0x00000301)  /*!< Error passive flag   */
+#define CAN_FLAG_BOF               ((uint32_t)0x00000302)  /*!< Bus-Off flag         */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Interrupts CAN Interrupts
+  * @{
+  */
+#define CAN_IT_TME                  ((uint32_t)CAN_IER_TMEIE)   /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0                 ((uint32_t)CAN_IER_FMPIE0)  /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_FF0                  ((uint32_t)CAN_IER_FFIE0)   /*!< FIFO 0 full interrupt            */
+#define CAN_IT_FOV0                 ((uint32_t)CAN_IER_FOVIE0)  /*!< FIFO 0 overrun interrupt         */
+#define CAN_IT_FMP1                 ((uint32_t)CAN_IER_FMPIE1)  /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_FF1                  ((uint32_t)CAN_IER_FFIE1)   /*!< FIFO 1 full interrupt            */
+#define CAN_IT_FOV1                 ((uint32_t)CAN_IER_FOVIE1)  /*!< FIFO 1 overrun interrupt         */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU                  ((uint32_t)CAN_IER_WKUIE)  /*!< Wake-up interrupt           */
+#define CAN_IT_SLK                  ((uint32_t)CAN_IER_SLKIE)  /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_EWG                  ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt   */
+#define CAN_IT_EPV                  ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt   */
+#define CAN_IT_BOF                  ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt         */
+#define CAN_IT_LEC                  ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERR                  ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt           */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Mailboxes_Definition CAN Mailboxes Definition
+  * @{
+  */
+#define CAN_TXMAILBOX_0   ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1   ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2   ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macros CAN Exported Macros
+  * @{
+  */
+
+/** @brief Reset CAN handle state
+  * @param  __HANDLE__: specifies the CAN Handle.
+  * @retval None
+  */
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+
+/**
+  * @brief  Enable the specified CAN interrupts.
+  * @param  __HANDLE__: CAN handle
+  * @param  __INTERRUPT__: CAN Interrupt
+  * @retval None
+  */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified CAN interrupts.
+  * @param  __HANDLE__: CAN handle
+  * @param  __INTERRUPT__: CAN Interrupt
+  * @retval None
+  */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Return the number of pending received messages.
+  * @param  __HANDLE__: CAN handle
+  * @param  __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+  * @retval The number of pending message.
+  */
+#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((uint8_t)((__HANDLE__)->Instance->RF0R&(uint32_t)0x03)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&(uint32_t)0x03)))
+
+/** @brief  Check whether the specified CAN flag is set or not.
+  * @param  __HANDLE__: CAN Handle
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+  *            @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+  *            @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+  *            @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+  *            @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+  *            @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+  *            @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+  *            @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+  *            @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+  *            @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+  *            @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+  *            @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+  *            @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+  *            @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+  *            @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+  *            @arg CAN_FLAG_WKU: Wake up Flag
+  *            @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+  *            @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+  *            @arg CAN_FLAG_EWG: Error Warning Flag
+  *            @arg CAN_FLAG_EPV: Error Passive Flag
+  *            @arg CAN_FLAG_BOF: Bus-Off Flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? ((((__HANDLE__)->Instance->TSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? ((((__HANDLE__)->Instance->RF0R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? ((((__HANDLE__)->Instance->RF1R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? ((((__HANDLE__)->Instance->MSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ ((((__HANDLE__)->Instance->ESR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief  Clear the specified CAN pending flag.
+  * @param  __HANDLE__: CAN Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+  *            @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+  *            @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+  *            @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+  *            @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+  *            @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+  *            @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+  *            @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+  *            @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+  *            @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+  *            @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+  *            @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+  *            @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+  *            @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+  *            @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+  *            @arg CAN_FLAG_WKU: Wake up Flag
+  *            @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+  *            @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+  *            @arg CAN_FLAG_EWG: Error Warning Flag
+  *            @arg CAN_FLAG_EPV: Error Passive Flag
+  *            @arg CAN_FLAG_BOF: Bus-Off Flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? (((__HANDLE__)->Instance->TSR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? (((__HANDLE__)->Instance->RF0R) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? (((__HANDLE__)->Instance->RF1R) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? (((__HANDLE__)->Instance->MSR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__HANDLE__)->Instance->ESR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief  Check if the specified CAN interrupt source is enabled or disabled.
+  * @param  __HANDLE__: CAN Handle
+  * @param  __INTERRUPT__: specifies the CAN interrupt source to check.
+  *          This parameter can be one of the following values:
+  *             @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+  *             @arg CAN_IT_FMP0: FIFO0 message pending interrupt enable
+  *             @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+  * @brief  Check the transmission status of a CAN Frame.
+  * @param  __HANDLE__: CAN Handle
+  * @param  __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+  * @retval The new status of transmission  (TRUE or FALSE).
+  */
+#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
+ ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
+
+/**
+  * @brief  Release the specified receive FIFO.
+  * @param  __HANDLE__: CAN handle
+  * @param  __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+  * @retval None
+  */
+#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1))
+
+/**
+  * @brief  Cancel a transmit request.
+  * @param  __HANDLE__: CAN Handle
+  * @param  __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+  * @retval None
+  */
+#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ0) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ1) :\
+ ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ2))
+
+/**
+  * @brief  Enable or disable the DBG Freeze for CAN.
+  * @param  __HANDLE__: CAN Handle
+  * @param  __NEWSTATE__: new state of the CAN peripheral.
+  *          This parameter can be: ENABLE (CAN reception/transmission is frozen
+  *          during debug. Reception FIFOs can still be accessed/controlled normally)
+  *          or DISABLE (CAN is working during debug).
+  * @retval None
+  */
+#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CAN_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions ***********************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+/**
+  * @}
+  */
+
+/** @addtogroup CAN_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+/**
+  * @}
+  */
+
+/** @addtogroup CAN_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions ***************************************************/
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CAN_Private_Types CAN Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Variables CAN Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Constants CAN Private Constants
+  * @{
+  */
+#define CAN_TXSTATUS_NOMAILBOX      ((uint8_t)0x04)  /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+#define CAN_FLAG_MASK  ((uint32_t)0x000000FF)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CAN_Private_Macros CAN Private Macros
+  * @{
+  */
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+                           ((MODE) == CAN_MODE_LOOPBACK)|| \
+                           ((MODE) == CAN_MODE_SILENT) || \
+                           ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+                         ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+                                  ((MODE) == CAN_FILTERMODE_IDLIST))
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+                                    ((SCALE) == CAN_FILTERSCALE_32BIT))
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+                                  ((FIFO) == CAN_FILTER_FIFO1))
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28)
+
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID)   ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID)   ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC)       ((DLC) <= ((uint8_t)0x08))
+
+#define IS_CAN_IDTYPE(IDTYPE)  (((IDTYPE) == CAN_ID_STD) || \
+                                ((IDTYPE) == CAN_ID_EXT))
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Functions CAN Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cec.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cec.h
new file mode 100644
index 0000000..f9efd78
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cec.h
@@ -0,0 +1,681 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_cec.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of CEC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CEC_H
+#define __STM32F4xx_HAL_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CEC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CEC_Exported_Types CEC Exported Types
+  * @{
+  */
+
+/**
+  * @brief CEC Init Structure definition
+  */
+typedef struct
+{
+  uint32_t SignalFreeTime;               /*!< Set SFT field, specifies the Signal Free Time.
+                                              It can be one of @ref CEC_Signal_Free_Time
+                                              and belongs to the set {0,...,7} where
+                                              0x0 is the default configuration
+                                              else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
+
+  uint32_t Tolerance;                    /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
+                                              it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE
+                                              or CEC_EXTENDED_TOLERANCE */
+
+  uint32_t BRERxStop;                    /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception.
+                                              CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
+                                              CEC_RX_STOP_ON_BRE:    reception is stopped. */
+
+  uint32_t BREErrorBitGen;               /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
+                                              CEC line upon Bit Rising Error detection.
+                                              CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
+                                              CEC_BRE_ERRORBIT_GENERATION:    error-bit generation if BRESTP is set. */
+
+  uint32_t LBPEErrorBitGen;              /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
+                                              CEC line upon Long Bit Period Error detection.
+                                              CEC_LBPE_ERRORBIT_NO_GENERATION:  no error-bit generation.
+                                              CEC_LBPE_ERRORBIT_GENERATION:     error-bit generation. */
+
+  uint32_t BroadcastMsgNoErrorBitGen;    /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
+                                              upon an error detected on a broadcast message.
+
+                                              It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
+
+                                              1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
+                                                 a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
+                                                    and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
+                                                 b) LBPE detection: error-bit generation on the CEC line
+                                                    if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
+
+                                              2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
+                                                 no error-bit generation in case neither a) nor b) are satisfied. Additionally,
+                                                 there is no error-bit generation in case of Short Bit Period Error detection in
+                                                 a broadcast message while LSTN bit is set. */
+
+  uint32_t SignalFreeTimeOption;         /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
+                                              CEC_SFT_START_ON_TXSOM SFT:    timer starts when TXSOM is set by software.
+                                              CEC_SFT_START_ON_TX_RX_END:  SFT timer starts automatically at the end of message transmission/reception. */
+
+  uint32_t OwnAddress;                   /*!< Set OAR field, specifies CEC device address within a 15-bit long field */
+
+  uint32_t ListenMode;                   /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
+
+                                              CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
+                                                own address (OAR). Messages addressed to different destination are ignored.
+                                                Broadcast messages are always received.
+
+                                              CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
+                                                address (OAR) with positive acknowledge. Messages addressed to different destination
+                                                are received, but without interfering with the CEC bus: no acknowledge sent.  */
+
+  uint8_t  InitiatorAddress;             /* Initiator address (source logical address, sent in each header) */
+
+}CEC_InitTypeDef;
+
+/**
+  * @brief HAL CEC State structures definition
+  */
+typedef enum
+{
+  HAL_CEC_STATE_RESET             = 0x00,    /*!< Peripheral Reset state                              */
+  HAL_CEC_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use            */
+  HAL_CEC_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing                      */
+  HAL_CEC_STATE_BUSY_TX           = 0x03,    /*!< Data Transmission process is ongoing                */
+  HAL_CEC_STATE_BUSY_RX           = 0x04,    /*!< Data Reception process is ongoing                   */
+  HAL_CEC_STATE_STANDBY_RX        = 0x05,    /*!< IP ready to receive, doesn't prevent IP to transmit */
+  HAL_CEC_STATE_TIMEOUT           = 0x06,    /*!< Timeout state                                       */
+  HAL_CEC_STATE_ERROR             = 0x07     /*!< State Error                                         */
+}HAL_CEC_StateTypeDef;
+
+/**
+  * @brief  CEC handle Structure definition
+  */
+typedef struct
+{
+  CEC_TypeDef             *Instance;      /* CEC registers base address */
+
+  CEC_InitTypeDef         Init;           /* CEC communication parameters */
+
+  uint8_t                 *pTxBuffPtr;    /* Pointer to CEC Tx transfer Buffer */
+
+  uint16_t                TxXferCount;    /* CEC Tx Transfer Counter */
+
+  uint8_t                 *pRxBuffPtr;    /* Pointer to CEC Rx transfer Buffer */
+
+  uint16_t                RxXferSize;     /* CEC Rx Transfer size, 0: header received only */
+
+  uint32_t                ErrorCode;      /* For errors handling purposes, copy of ISR register
+                                            in case error is reported */
+
+  HAL_LockTypeDef         Lock;           /* Locking object */
+
+  HAL_CEC_StateTypeDef    State;          /* CEC communication state */
+
+}CEC_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants CEC Exported Constants
+  * @{
+  */
+
+/** @defgroup CEC_Error_Code CEC Error Code
+  * @{
+  */
+#define HAL_CEC_ERROR_NONE    (uint32_t) 0x0         /*!< no error                      */
+#define HAL_CEC_ERROR_RXOVR   CEC_ISR_RXOVR          /*!< CEC Rx-Overrun                */
+#define HAL_CEC_ERROR_BRE     CEC_ISR_BRE            /*!< CEC Rx Bit Rising Error       */
+#define HAL_CEC_ERROR_SBPE    CEC_ISR_SBPE           /*!< CEC Rx Short Bit period Error */
+#define HAL_CEC_ERROR_LBPE    CEC_ISR_LBPE           /*!< CEC Rx Long Bit period Error  */
+#define HAL_CEC_ERROR_RXACKE  CEC_ISR_RXACKE         /*!< CEC Rx Missing Acknowledge    */
+#define HAL_CEC_ERROR_ARBLST  CEC_ISR_ARBLST         /*!< CEC Arbitration Lost          */
+#define HAL_CEC_ERROR_TXUDR   CEC_ISR_TXUDR          /*!< CEC Tx-Buffer Underrun        */
+#define HAL_CEC_ERROR_TXERR   CEC_ISR_TXERR          /*!< CEC Tx-Error                  */
+#define HAL_CEC_ERROR_TXACKE  CEC_ISR_TXACKE         /*!< CEC Tx Missing Acknowledge    */
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Signal_Free_Time  CEC Signal Free Time setting parameter
+  * @{
+  */
+#define CEC_DEFAULT_SFT                    ((uint32_t)0x00000000)
+#define CEC_0_5_BITPERIOD_SFT              ((uint32_t)0x00000001)
+#define CEC_1_5_BITPERIOD_SFT              ((uint32_t)0x00000002)
+#define CEC_2_5_BITPERIOD_SFT              ((uint32_t)0x00000003)
+#define CEC_3_5_BITPERIOD_SFT              ((uint32_t)0x00000004)
+#define CEC_4_5_BITPERIOD_SFT              ((uint32_t)0x00000005)
+#define CEC_5_5_BITPERIOD_SFT              ((uint32_t)0x00000006)
+#define CEC_6_5_BITPERIOD_SFT              ((uint32_t)0x00000007)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Tolerance CEC Receiver Tolerance
+  * @{
+  */
+#define CEC_STANDARD_TOLERANCE             ((uint32_t)0x00000000)
+#define CEC_EXTENDED_TOLERANCE             ((uint32_t)CEC_CFGR_RXTOL)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_BRERxStop CEC Reception Stop on Error
+  * @{
+  */
+#define CEC_NO_RX_STOP_ON_BRE             ((uint32_t)0x00000000)
+#define CEC_RX_STOP_ON_BRE                ((uint32_t)CEC_CFGR_BRESTP)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_BREErrorBitGen  CEC Error Bit Generation if Bit Rise Error reported
+  * @{
+  */
+#define CEC_BRE_ERRORBIT_NO_GENERATION     ((uint32_t)0x00000000)
+#define CEC_BRE_ERRORBIT_GENERATION        ((uint32_t)CEC_CFGR_BREGEN)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_LBPEErrorBitGen  CEC Error Bit Generation if Long Bit Period Error reported
+  * @{
+  */
+#define CEC_LBPE_ERRORBIT_NO_GENERATION     ((uint32_t)0x00000000)
+#define CEC_LBPE_ERRORBIT_GENERATION        ((uint32_t)CEC_CFGR_LBPEGEN)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_BroadCastMsgErrorBitGen  CEC Error Bit Generation on Broadcast message
+  * @{
+  */
+#define CEC_BROADCASTERROR_ERRORBIT_GENERATION     ((uint32_t)0x00000000)
+#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION  ((uint32_t)CEC_CFGR_BRDNOGEN)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_SFT_Option     CEC Signal Free Time start option
+  * @{
+  */
+#define CEC_SFT_START_ON_TXSOM           ((uint32_t)0x00000000)
+#define CEC_SFT_START_ON_TX_RX_END       ((uint32_t)CEC_CFGR_SFTOPT)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Listening_Mode    CEC Listening mode option
+  * @{
+  */
+#define CEC_REDUCED_LISTENING_MODE          ((uint32_t)0x00000000)
+#define CEC_FULL_LISTENING_MODE             ((uint32_t)CEC_CFGR_LSTN)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_OAR_Position   CEC Device Own Address position in CEC CFGR register
+  * @{
+  */
+#define CEC_CFGR_OAR_LSB_POS            ((uint32_t) 16)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Initiator_Position   CEC Initiator logical address position in message header
+  * @{
+  */
+#define CEC_INITIATOR_LSB_POS           ((uint32_t) 4)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Interrupts_Definitions  CEC Interrupts definition
+  * @{
+  */
+#define CEC_IT_TXACKE                   CEC_IER_TXACKEIE
+#define CEC_IT_TXERR                    CEC_IER_TXERRIE
+#define CEC_IT_TXUDR                    CEC_IER_TXUDRIE
+#define CEC_IT_TXEND                    CEC_IER_TXENDIE
+#define CEC_IT_TXBR                     CEC_IER_TXBRIE
+#define CEC_IT_ARBLST                   CEC_IER_ARBLSTIE
+#define CEC_IT_RXACKE                   CEC_IER_RXACKEIE
+#define CEC_IT_LBPE                     CEC_IER_LBPEIE
+#define CEC_IT_SBPE                     CEC_IER_SBPEIE
+#define CEC_IT_BRE                      CEC_IER_BREIE
+#define CEC_IT_RXOVR                    CEC_IER_RXOVRIE
+#define CEC_IT_RXEND                    CEC_IER_RXENDIE
+#define CEC_IT_RXBR                     CEC_IER_RXBRIE
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Flags_Definitions  CEC Flags definition
+  * @{
+  */
+#define CEC_FLAG_TXACKE                 CEC_ISR_TXACKE
+#define CEC_FLAG_TXERR                  CEC_ISR_TXERR
+#define CEC_FLAG_TXUDR                  CEC_ISR_TXUDR
+#define CEC_FLAG_TXEND                  CEC_ISR_TXEND
+#define CEC_FLAG_TXBR                   CEC_ISR_TXBR
+#define CEC_FLAG_ARBLST                 CEC_ISR_ARBLST
+#define CEC_FLAG_RXACKE                 CEC_ISR_RXACKE
+#define CEC_FLAG_LBPE                   CEC_ISR_LBPE
+#define CEC_FLAG_SBPE                   CEC_ISR_SBPE
+#define CEC_FLAG_BRE                    CEC_ISR_BRE
+#define CEC_FLAG_RXOVR                  CEC_ISR_RXOVR
+#define CEC_FLAG_RXEND                  CEC_ISR_RXEND
+#define CEC_FLAG_RXBR                   CEC_ISR_RXBR
+/**
+  * @}
+  */
+
+/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags
+  * @{
+  */
+#define CEC_ISR_ALL_ERROR              ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
+                                                  CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag
+  * @{
+  */
+#define CEC_IER_RX_ALL_ERR              ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag
+  * @{
+  */
+#define CEC_IER_TX_ALL_ERR              ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros CEC Exported Macros
+  * @{
+  */
+
+/** @brief  Reset CEC handle state
+  * @param  __HANDLE__: CEC handle.
+  * @retval None
+  */
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CEC_STATE_RESET)
+
+/** @brief  Checks whether or not the specified CEC interrupt flag is set.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __FLAG__: specifies the interrupt to check.
+  *            @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+  *            @arg CEC_FLAG_TXERR: Tx Error.
+  *            @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+  *            @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+  *            @arg CEC_FLAG_TXBR: Tx-Byte Request.
+  *            @arg CEC_FLAG_ARBLST: Arbitration Lost
+  *            @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
+  *            @arg CEC_FLAG_LBPE: Rx Long period Error
+  *            @arg CEC_FLAG_SBPE: Rx Short period Error
+  *            @arg CEC_FLAG_BRE: Rx Bit Rissing Error
+  *            @arg CEC_FLAG_RXOVR: Rx Overrun.
+  *            @arg CEC_FLAG_RXEND: End Of Reception.
+  *            @arg CEC_FLAG_RXBR: Rx-Byte Received.
+  * @retval ITStatus
+  */
+#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__)        ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/** @brief  Clears the interrupt or status flag when raised (write at 1)
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __FLAG__: specifies the interrupt/status flag to clear.
+  *        This parameter can be one of the following values:
+  *            @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+  *            @arg CEC_FLAG_TXERR: Tx Error.
+  *            @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+  *            @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+  *            @arg CEC_FLAG_TXBR: Tx-Byte Request.
+  *            @arg CEC_FLAG_ARBLST: Arbitration Lost
+  *            @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
+  *            @arg CEC_FLAG_LBPE: Rx Long period Error
+  *            @arg CEC_FLAG_SBPE: Rx Short period Error
+  *            @arg CEC_FLAG_BRE: Rx Bit Rissing Error
+  *            @arg CEC_FLAG_RXOVR: Rx Overrun.
+  *            @arg CEC_FLAG_RXEND: End Of Reception.
+  *            @arg CEC_FLAG_RXBR: Rx-Byte Received.
+  * @retval none
+  */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__)         ((__HANDLE__)->Instance->ISR |= (__FLAG__))
+
+/** @brief  Enables the specified CEC interrupt.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __INTERRUPT__: specifies the CEC interrupt to enable.
+  *          This parameter can be one of the following values:
+  *            @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+  *            @arg CEC_IT_TXERR: Tx Error IT Enable
+  *            @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+  *            @arg CEC_IT_TXEND: End of transmission IT Enable
+  *            @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+  *            @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+  *            @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+  *            @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+  *            @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+  *            @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+  *            @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+  *            @arg CEC_IT_RXEND: End Of Reception IT Enable
+  *            @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+  * @retval none
+  */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/** @brief  Disables the specified CEC interrupt.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __INTERRUPT__: specifies the CEC interrupt to disable.
+  *          This parameter can be one of the following values:
+  *            @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+  *            @arg CEC_IT_TXERR: Tx Error IT Enable
+  *            @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+  *            @arg CEC_IT_TXEND: End of transmission IT Enable
+  *            @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+  *            @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+  *            @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+  *            @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+  *            @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+  *            @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+  *            @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+  *            @arg CEC_IT_RXEND: End Of Reception IT Enable
+  *            @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+  * @retval none
+  */
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief  Checks whether or not the specified CEC interrupt is enabled.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __INTERRUPT__: specifies the CEC interrupt to check.
+  *          This parameter can be one of the following values:
+  *            @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+  *            @arg CEC_IT_TXERR: Tx Error IT Enable
+  *            @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+  *            @arg CEC_IT_TXEND: End of transmission IT Enable
+  *            @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+  *            @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+  *            @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+  *            @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+  *            @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+  *            @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+  *            @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+  *            @arg CEC_IT_RXEND: End Of Reception IT Enable
+  *            @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+  * @retval FlagStatus
+  */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+
+/** @brief  Enables the CEC device
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @retval none
+  */
+#define __HAL_CEC_ENABLE(__HANDLE__)                   ((__HANDLE__)->Instance->CR |=  CEC_CR_CECEN)
+
+/** @brief  Disables the CEC device
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @retval none
+  */
+#define __HAL_CEC_DISABLE(__HANDLE__)                  ((__HANDLE__)->Instance->CR &=  ~CEC_CR_CECEN)
+
+/** @brief  Set Transmission Start flag
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @retval none
+  */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__)        ((__HANDLE__)->Instance->CR |=  CEC_CR_TXSOM)
+
+/** @brief  Set Transmission End flag
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @retval none
+  * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.
+  */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__)         ((__HANDLE__)->Instance->CR |=  CEC_CR_TXEOM)
+
+/** @brief  Get Transmission Start flag
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @retval FlagStatus
+  */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
+
+/** @brief  Get Transmission End flag
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @retval FlagStatus
+  */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__)   ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)
+
+/** @brief  Clear OAR register
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @retval none
+  */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__)   CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
+
+/** @brief  Set OAR register (without resetting previously set address in case of multi-address mode)
+  *          To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __ADDRESS__: Own Address value (CEC logical address is identified by bit position)
+  * @retval none
+  */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__)   SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CEC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CEC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+/**
+  * @}
+  */
+
+/** @addtogroup CEC_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions  ***************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
+HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData);
+uint32_t HAL_CEC_GetReceivedFrameSize(CEC_HandleTypeDef *hcec);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+/**
+  * @}
+  */
+
+/** @addtogroup CEC_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  ************************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CEC_Private_Types CEC Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Variables CEC Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Macros CEC Private Macros
+  * @{
+  */
+
+#define IS_CEC_SIGNALFREETIME(__SFT__)     ((__SFT__) <= CEC_CFGR_SFT)
+
+#define IS_CEC_TOLERANCE(__RXTOL__)        (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \
+                                            ((__RXTOL__) == CEC_EXTENDED_TOLERANCE))
+
+#define IS_CEC_BRERXSTOP(__BRERXSTOP__)   (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \
+                                           ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE))
+
+#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
+                                                ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION))
+
+#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
+                                                 ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION))
+
+#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
+                                                                       ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+
+#define IS_CEC_SFTOP(__SFTOP__)          (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \
+                                          ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END))
+
+#define IS_CEC_LISTENING_MODE(__MODE__)     (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \
+                                             ((__MODE__) == CEC_FULL_LISTENING_MODE))
+
+/** @brief Check CEC device Own Address Register (OAR) setting.
+  *        OAR address is written in a 15-bit field within CEC_CFGR register.
+  * @param  __ADDRESS__: CEC own address.
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_CEC_OAR_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x07FFF)
+
+/** @brief Check CEC initiator or destination logical address setting.
+  *        Initiator and destination addresses are coded over 4 bits.
+  * @param  __ADDRESS__: CEC initiator or logical address.
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF)
+
+/** @brief Check CEC message size.
+  *       The message size is the payload size: without counting the header,
+  *       it varies from 0 byte (ping operation, one header only, no payload) to
+  *       15 bytes (1 opcode and up to 14 operands following the header).
+  * @param  __SIZE__: CEC message size.
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0xF)
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_conf_template.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_conf_template.h
new file mode 100644
index 0000000..005eed7
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_conf_template.h
@@ -0,0 +1,427 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f4xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_FMPI2C_MODULE_ENABLED
+#define HAL_SPDIFRX_MODULE_ENABLED
+
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE  ((uint32_t)32000)       /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)0x0F) /*!< tick interrupt priority */
+#define  USE_RTOS                     0
+#define  PREFETCH_ENABLE              1
+#define  INSTRUCTION_CACHE_ENABLE     1
+#define  DATA_CACHE_ENABLE            1
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1 */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2
+#define MAC_ADDR1   0
+#define MAC_ADDR2   0
+#define MAC_ADDR3   0
+#define MAC_ADDR4   0
+#define MAC_ADDR5   0
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    ((uint32_t)4)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    ((uint32_t)4)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS             0x01
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 ((uint32_t)0x000000FF)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
+
+#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
+#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x10)    /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x11)    /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x12)    /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h
new file mode 100644
index 0000000..654804c
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h
@@ -0,0 +1,200 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_cortex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of CORTEX HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CORTEX_H
+#define __STM32F4xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CORTEX
+  * @{
+  */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+  * @{
+  */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+  * @{
+  */
+#define NVIC_PRIORITYGROUP_0         ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority
+                                                                 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1         ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority
+                                                                 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2         ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority
+                                                                 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3         ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority
+                                                                 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4         ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority
+                                                                 0 bits for subpriority */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
+  * @{
+  */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8    ((uint32_t)0x00000000)
+#define SYSTICK_CLKSOURCE_HCLK         ((uint32_t)0x00000004)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros
+  * @{
+  */
+
+/** @brief Configures the SysTick clock source.
+  * @param __CLKSRC__: specifies the SysTick clock source.
+  *   This parameter can be one of the following values:
+  *     @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+  *     @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+  * @retval None
+  */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG(__CLKSRC__)                             \
+                            do {                                               \
+                                 if ((__CLKSRC__) == SYSTICK_CLKSOURCE_HCLK)   \
+                                  {                                            \
+                                    SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;   \
+                                  }                                            \
+                                 else                                          \
+                                    SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;  \
+                                } while(0)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CORTEX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+  * @}
+  */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+  * @{
+  */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY)         ((PRIORITY) < 0x10)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ)                ((IRQ) >= 0x00)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+                                       ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h
new file mode 100644
index 0000000..550847b
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h
@@ -0,0 +1,249 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_crc.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of CRC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRC_H
+#define __STM32F4xx_HAL_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CRC CRC
+  * @brief CRC HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Types CRC Exported Types
+  * @{
+  */
+
+/** @defgroup CRC_Exported_Types_Group1 CRC State Structure definition
+  * @{
+  */
+typedef enum
+{
+  HAL_CRC_STATE_RESET     = 0x00,  /*!< CRC not yet initialized or disabled */
+  HAL_CRC_STATE_READY     = 0x01,  /*!< CRC initialized and ready for use   */
+  HAL_CRC_STATE_BUSY      = 0x02,  /*!< CRC internal process is ongoing     */
+  HAL_CRC_STATE_TIMEOUT   = 0x03,  /*!< CRC timeout state                   */
+  HAL_CRC_STATE_ERROR     = 0x04   /*!< CRC error state                     */
+
+}HAL_CRC_StateTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Exported_Types_Group2 CRC Handle Structure definition
+  * @{
+  */
+typedef struct
+{
+  CRC_TypeDef                 *Instance;  /*!< Register base address   */
+
+  HAL_LockTypeDef             Lock;       /*!< CRC locking object      */
+
+  __IO HAL_CRC_StateTypeDef   State;      /*!< CRC communication state */
+
+}CRC_HandleTypeDef;
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Macros CRC Exported Macros
+  * @{
+  */
+
+/** @brief Resets CRC handle state
+  * @param  __HANDLE__: CRC handle
+  * @retval None
+  */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+  * @brief  Resets CRC Data Register.
+  * @param  __HANDLE__: CRC handle
+  * @retval None
+  */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+  * @brief Stores a 8-bit data in the Independent Data(ID) register.
+  * @param __HANDLE__: CRC handle
+  * @param __VALUE__: 8-bit value to be stored in the ID register
+  * @retval None
+  */
+#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__)))
+
+/**
+  * @brief Returns the 8-bit data stored in the Independent Data(ID) register.
+  * @param __HANDLE__: CRC handle
+  * @retval 8-bit value of the ID register
+  */
+#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Functions CRC Exported Functions
+  * @{
+  */
+
+/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
+  * @{
+  */
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
+  * @{
+  */
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CRC_Private_Types CRC Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup CRC_Private_Defines CRC Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRC_Private_Variables CRC Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRC_Private_Constants CRC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRC_Private_Macros CRC Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup CRC_Private_Functions_Prototypes CRC Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRC_Private_Functions CRC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp.h
new file mode 100644
index 0000000..69440bb
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp.h
@@ -0,0 +1,536 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_cryp.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of CRYP HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRYP_H
+#define __STM32F4xx_HAL_CRYP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CRYP
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup CRYP_Exported_Types CRYP Exported Types
+  * @{
+  */
+
+/** @defgroup CRYP_Exported_Types_Group1 CRYP Configuration Structure definition
+  * @{
+  */
+
+typedef struct
+{
+  uint32_t DataType;    /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+                             This parameter can be a value of @ref CRYP CRYP_Data_Type */
+
+  uint32_t KeySize;     /*!< Used only in AES mode only : 128, 192 or 256 bit key length.
+                             This parameter can be a value of @ref CRYP CRYP_Key_Size */
+
+  uint8_t* pKey;        /*!< The key used for encryption/decryption */
+
+  uint8_t* pInitVect;   /*!< The initialization vector used also as initialization
+                             counter in CTR mode */
+
+  uint8_t IVSize;       /*!< The size of initialization vector.
+                             This parameter (called nonce size in CCM) is used only
+                             in AES-128/192/256 encryption/decryption CCM mode */
+
+  uint8_t TagSize;      /*!< The size of returned authentication TAG.
+                             This parameter is used only in AES-128/192/256
+                             encryption/decryption CCM mode */
+
+  uint8_t* Header;      /*!< The header used in GCM and CCM modes */
+
+  uint32_t HeaderSize;  /*!< The size of header buffer in bytes */
+
+  uint8_t* pScratch;    /*!< Scratch buffer used to append the header. It's size must be equal to header size + 21 bytes.
+                             This parameter is used only in AES-128/192/256 encryption/decryption CCM mode */
+}CRYP_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Types_Group2 CRYP State structures definition
+  * @{
+  */
+
+
+typedef enum
+{
+  HAL_CRYP_STATE_RESET             = 0x00,  /*!< CRYP not yet initialized or disabled  */
+  HAL_CRYP_STATE_READY             = 0x01,  /*!< CRYP initialized and ready for use    */
+  HAL_CRYP_STATE_BUSY              = 0x02,  /*!< CRYP internal processing is ongoing   */
+  HAL_CRYP_STATE_TIMEOUT           = 0x03,  /*!< CRYP timeout state                    */
+  HAL_CRYP_STATE_ERROR             = 0x04   /*!< CRYP error state                      */
+}HAL_CRYP_STATETypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Types_Group3 CRYP phase structures definition
+  * @{
+  */
+
+
+typedef enum
+{
+  HAL_CRYP_PHASE_READY             = 0x01,    /*!< CRYP peripheral is ready for initialization. */
+  HAL_CRYP_PHASE_PROCESS           = 0x02,    /*!< CRYP peripheral is in processing phase */
+  HAL_CRYP_PHASE_FINAL             = 0x03     /*!< CRYP peripheral is in final phase
+                                                   This is relevant only with CCM and GCM modes */
+}HAL_PhaseTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Types_Group4 CRYP handle Structure definition
+  * @{
+  */
+
+typedef struct
+{
+      CRYP_TypeDef             *Instance;        /*!< CRYP registers base address */
+
+      CRYP_InitTypeDef         Init;             /*!< CRYP required parameters */
+
+      uint8_t                  *pCrypInBuffPtr;  /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+      uint8_t                  *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+      __IO uint16_t            CrypInCount;      /*!< Counter of inputed data */
+
+      __IO uint16_t            CrypOutCount;     /*!< Counter of outputted data */
+
+      HAL_StatusTypeDef        Status;           /*!< CRYP peripheral status */
+
+      HAL_PhaseTypeDef         Phase;            /*!< CRYP peripheral phase */
+
+      DMA_HandleTypeDef        *hdmain;          /*!< CRYP In DMA handle parameters */
+
+      DMA_HandleTypeDef        *hdmaout;         /*!< CRYP Out DMA handle parameters */
+
+      HAL_LockTypeDef          Lock;             /*!< CRYP locking object */
+
+   __IO  HAL_CRYP_STATETypeDef State;            /*!< CRYP peripheral state */
+}CRYP_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Constants CRYP Exported Constants
+  * @{
+  */
+
+/** @defgroup CRYP_Exported_Constants_Group1 CRYP CRYP_Key_Size
+  * @{
+  */
+#define CRYP_KEYSIZE_128B         ((uint32_t)0x00000000)
+#define CRYP_KEYSIZE_192B         CRYP_CR_KEYSIZE_0
+#define CRYP_KEYSIZE_256B         CRYP_CR_KEYSIZE_1
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Constants_Group2 CRYP CRYP_Data_Type
+  * @{
+  */
+#define CRYP_DATATYPE_32B         ((uint32_t)0x00000000)
+#define CRYP_DATATYPE_16B         CRYP_CR_DATATYPE_0
+#define CRYP_DATATYPE_8B          CRYP_CR_DATATYPE_1
+#define CRYP_DATATYPE_1B          CRYP_CR_DATATYPE
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Constants_Group3 CRYP CRYP_AlgoModeDirection
+  * @{
+  */
+#define CRYP_CR_ALGOMODE_DIRECTION         ((uint32_t)0x0008003C)
+#define CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT  ((uint32_t)0x00000000)
+#define CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT  ((uint32_t)0x00000004)
+#define CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT  ((uint32_t)0x00000008)
+#define CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT  ((uint32_t)0x0000000C)
+#define CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT   ((uint32_t)0x00000010)
+#define CRYP_CR_ALGOMODE_DES_ECB_DECRYPT   ((uint32_t)0x00000014)
+#define CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT   ((uint32_t)0x00000018)
+#define CRYP_CR_ALGOMODE_DES_CBC_DECRYPT   ((uint32_t)0x0000001C)
+#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT   ((uint32_t)0x00000020)
+#define CRYP_CR_ALGOMODE_AES_ECB_DECRYPT   ((uint32_t)0x00000024)
+#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT   ((uint32_t)0x00000028)
+#define CRYP_CR_ALGOMODE_AES_CBC_DECRYPT   ((uint32_t)0x0000002C)
+#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT   ((uint32_t)0x00000030)
+#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT   ((uint32_t)0x00000034)
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Constants_Group4 CRYP CRYP_Interrupt
+  * @{
+  */
+#define CRYP_IT_INI               ((uint32_t)CRYP_IMSCR_INIM)   /*!< Input FIFO Interrupt */
+#define CRYP_IT_OUTI              ((uint32_t)CRYP_IMSCR_OUTIM)  /*!< Output FIFO Interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Constants_Group5 CRYP CRYP_Flags
+  * @{
+  */
+#define CRYP_FLAG_BUSY   ((uint32_t)0x00000010)  /*!< The CRYP core is currently
+                                                     processing a block of data
+                                                     or a key preparation (for
+                                                     AES decryption). */
+#define CRYP_FLAG_IFEM   ((uint32_t)0x00000001)  /*!< Input FIFO is empty */
+#define CRYP_FLAG_IFNF   ((uint32_t)0x00000002)  /*!< Input FIFO is not Full */
+#define CRYP_FLAG_OFNE   ((uint32_t)0x00000004)  /*!< Output FIFO is not empty */
+#define CRYP_FLAG_OFFU   ((uint32_t)0x00000008)  /*!< Output FIFO is Full */
+#define CRYP_FLAG_OUTRIS ((uint32_t)0x01000002)  /*!< Output FIFO service raw
+                                                      interrupt status */
+#define CRYP_FLAG_INRIS  ((uint32_t)0x01000001)  /*!< Input FIFO service raw
+                                                      interrupt status */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Macros CRYP Exported Macros
+  * @{
+  */
+
+/** @brief Reset CRYP handle state
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @retval None
+  */
+#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
+
+/**
+  * @brief  Enable/Disable the CRYP peripheral.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @retval None
+  */
+#define __HAL_CRYP_ENABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR |=  CRYP_CR_CRYPEN)
+#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &=  ~CRYP_CR_CRYPEN)
+
+/**
+  * @brief  Flush the data FIFO.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @retval None
+  */
+#define __HAL_CRYP_FIFO_FLUSH(__HANDLE__) ((__HANDLE__)->Instance->CR |=  CRYP_CR_FFLUSH)
+
+/**
+  * @brief  Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  MODE: The algorithm mode.
+  * @retval None
+  */
+#define __HAL_CRYP_SET_MODE(__HANDLE__, MODE)  ((__HANDLE__)->Instance->CR |= (uint32_t)(MODE))
+
+/** @brief  Check whether the specified CRYP flag is set or not.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data
+  *                                 or a key preparation (for AES decryption).
+  *            @arg CRYP_FLAG_IFEM: Input FIFO is empty
+  *            @arg CRYP_FLAG_IFNF: Input FIFO is not full
+  *            @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending
+  *            @arg CRYP_FLAG_OFNE: Output FIFO is not empty
+  *            @arg CRYP_FLAG_OFFU: Output FIFO is full
+  *            @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+
+#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 24)) == 0x01)?((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \
+                                                 ((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))
+
+/** @brief  Check whether the specified CRYP interrupt is set or not.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __INTERRUPT__: specifies the interrupt to check.
+  *         This parameter can be one of the following values:
+  *            @arg CRYP_IT_INRIS: Input FIFO service raw interrupt is pending
+  *            @arg CRYP_IT_OUTRIS: Output FIFO service raw interrupt is pending
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @brief  Enable the CRYP interrupt.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __INTERRUPT__: CRYP Interrupt.
+  * @retval None
+  */
+#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the CRYP interrupt.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __INTERRUPT__: CRYP interrupt.
+  * @retval None
+  */
+#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Include CRYP HAL Extension module */
+#include "stm32f4xx_hal_cryp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Functions CRYP Exported Functions
+  * @{
+  */
+
+/** @addtogroup CRYP_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
+/**
+  * @}
+  */
+
+/** @addtogroup CRYP_Exported_Functions_Group2
+  * @{
+  */
+/* AES encryption/decryption using polling  ***********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt  *********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA  ***************************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+/**
+  * @}
+  */
+
+/** @addtogroup CRYP_Exported_Functions_Group3
+  * @{
+  */
+/* DES encryption/decryption using polling  ***********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+
+/* DES encryption/decryption using interrupt  *********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* DES encryption/decryption using DMA  ***************************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+/**
+  * @}
+  */
+
+/** @addtogroup CRYP_Exported_Functions_Group4
+  * @{
+  */
+/* TDES encryption/decryption using polling  **********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* TDES encryption/decryption using interrupt  ********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* TDES encryption/decryption using DMA  **************************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+/**
+  * @}
+  */
+
+/** @addtogroup CRYP_Exported_Functions_Group5
+  * @{
+  */
+void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
+/**
+  * @}
+  */
+
+/** @addtogroup CRYP_Exported_Functions_Group6
+  * @{
+  */
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
+/**
+  * @}
+  */
+
+/** @addtogroup CRYP_Exported_Functions_Group7
+  * @{
+  */
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CRYP_Private_Types CRYP Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Variables CRYP Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Constants CRYP Private Constants
+  * @{
+  */
+#define CRYP_FLAG_MASK  ((uint32_t)0x0000001F)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRYP_Private_Macros CRYP Private Macros
+  * @{
+  */
+
+#define IS_CRYP_KEYSIZE(__KEYSIZE__)  (((__KEYSIZE__) == CRYP_KEYSIZE_128B)  || \
+                                       ((__KEYSIZE__) == CRYP_KEYSIZE_192B)  || \
+                                       ((__KEYSIZE__) == CRYP_KEYSIZE_256B))
+
+
+#define IS_CRYP_DATATYPE(__DATATYPE__) (((__DATATYPE__) == CRYP_DATATYPE_32B) || \
+                                        ((__DATATYPE__) == CRYP_DATATYPE_16B) || \
+                                        ((__DATATYPE__) == CRYP_DATATYPE_8B)  || \
+                                        ((__DATATYPE__) == CRYP_DATATYPE_1B))
+
+
+ /**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Functions CRYP Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRYP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp_ex.h
new file mode 100644
index 0000000..55fc815
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp_ex.h
@@ -0,0 +1,221 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_cryp_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of CRYP HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRYP_EX_H
+#define __STM32F4xx_HAL_CRYP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CRYPEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CRYPEx_Exported_Constants   CRYPEx Exported Constants
+  * @{
+  */
+
+/** @defgroup CRYPEx_Exported_Constants_Group1 CRYP AlgoModeDirection
+  * @{
+  */
+#define CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT   ((uint32_t)0x00080000)
+#define CRYP_CR_ALGOMODE_AES_GCM_DECRYPT   ((uint32_t)0x00080004)
+#define CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT   ((uint32_t)0x00080008)
+#define CRYP_CR_ALGOMODE_AES_CCM_DECRYPT   ((uint32_t)0x0008000C)
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYPEx_Exported_Constants_Group3 CRYP PhaseConfig
+  * @brief    The phases are relevant only to AES-GCM and AES-CCM
+  * @{
+  */
+#define CRYP_PHASE_INIT           ((uint32_t)0x00000000)
+#define CRYP_PHASE_HEADER         CRYP_CR_GCM_CCMPH_0
+#define CRYP_PHASE_PAYLOAD        CRYP_CR_GCM_CCMPH_1
+#define CRYP_PHASE_FINAL          CRYP_CR_GCM_CCMPH
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRYPEx_Exported_Macros CRYP Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Set the phase: Init, header, payload, final.
+  *         This is relevant only for GCM and CCM modes.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __PHASE__: The phase.
+  * @retval None
+  */
+#define __HAL_CRYP_SET_PHASE(__HANDLE__, __PHASE__)  do{(__HANDLE__)->Instance->CR &= (uint32_t)(~CRYP_CR_GCM_CCMPH);\
+                                                        (__HANDLE__)->Instance->CR |= (uint32_t)(__PHASE__);\
+                                                       }while(0)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRYPEx_Exported_Functions CRYPEx Exported Functions
+  * @{
+  */
+
+/** @addtogroup CRYPEx_Exported_Functions_Group1
+  * @{
+  */
+
+/* AES encryption/decryption using polling  ***********************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Finish(CRYP_HandleTypeDef *hcryp, uint32_t Size, uint8_t *AuthTag, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Finish(CRYP_HandleTypeDef *hcryp, uint8_t *AuthTag, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt  *********************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA  ***************************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/**
+  * @}
+  */
+
+/** @addtogroup CRYPEx_Exported_Functions_Group2
+  * @{
+  */
+
+void HAL_CRYPEx_GCMCCM_IRQHandler(CRYP_HandleTypeDef *hcryp);
+
+/**
+  * @}
+  */
+
+ /**
+  * @}
+  */
+
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Types CRYPEx Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Variables CRYPEx Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Constants CRYPEx Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Macros CRYPEx Private Macros
+  * @{
+  */
+
+ /**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Functions CRYPEx Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F437xx || STM32F439xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRYP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h
new file mode 100644
index 0000000..30b8cab
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h
@@ -0,0 +1,412 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dac.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of DAC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DAC_H
+#define __STM32F4xx_HAL_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DAC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DAC_Exported_Types DAC Exported Types
+  * @{
+  */
+
+/**
+  * @brief HAL State structures definition
+  */
+typedef enum
+{
+  HAL_DAC_STATE_RESET             = 0x00,  /*!< DAC not yet initialized or disabled  */
+  HAL_DAC_STATE_READY             = 0x01,  /*!< DAC initialized and ready for use    */
+  HAL_DAC_STATE_BUSY              = 0x02,  /*!< DAC internal processing is ongoing   */
+  HAL_DAC_STATE_TIMEOUT           = 0x03,  /*!< DAC timeout state                    */
+  HAL_DAC_STATE_ERROR             = 0x04   /*!< DAC error state                      */
+}HAL_DAC_StateTypeDef;
+
+/**
+  * @brief DAC handle Structure definition
+  */
+typedef struct
+{
+  DAC_TypeDef                 *Instance;     /*!< Register base address             */
+
+  __IO HAL_DAC_StateTypeDef   State;         /*!< DAC communication state           */
+
+  HAL_LockTypeDef             Lock;          /*!< DAC locking object                */
+
+  DMA_HandleTypeDef           *DMA_Handle1;  /*!< Pointer DMA handler for channel 1 */
+
+  DMA_HandleTypeDef           *DMA_Handle2;  /*!< Pointer DMA handler for channel 2 */
+
+  __IO uint32_t               ErrorCode;     /*!< DAC Error code                    */
+
+}DAC_HandleTypeDef;
+
+/**
+  * @brief DAC Configuration regular Channel structure definition
+  */
+typedef struct
+{
+  uint32_t DAC_Trigger;       /*!< Specifies the external trigger for the selected DAC channel.
+                                   This parameter can be a value of @ref DAC_trigger_selection */
+
+  uint32_t DAC_OutputBuffer;  /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+                                   This parameter can be a value of @ref DAC_output_buffer */
+}DAC_ChannelConfTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DAC_Exported_Constants DAC Exported Constants
+  * @{
+  */
+
+/** @defgroup DAC_Error_Code DAC Error Code
+  * @{
+  */
+#define  HAL_DAC_ERROR_NONE              0x00    /*!< No error                          */
+#define  HAL_DAC_ERROR_DMAUNDERRUNCH1    0x01    /*!< DAC channel1 DAM underrun error   */
+#define  HAL_DAC_ERROR_DMAUNDERRUNCH2    0x02    /*!< DAC channel2 DAM underrun error   */
+#define  HAL_DAC_ERROR_DMA               0x04    /*!< DMA error                         */
+/**
+  * @}
+  */
+
+/** @defgroup DAC_trigger_selection DAC Trigger Selection
+  * @{
+  */
+
+#define DAC_TRIGGER_NONE                   ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+                                                                       has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO                ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO                ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T5_TRGO                ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO                ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO                ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T8_TRGO                ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
+
+#define DAC_TRIGGER_EXT_IT9                ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE               ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+/**
+  * @}
+  */
+
+/** @defgroup DAC_output_buffer  DAC Output Buffer
+  * @{
+  */
+#define DAC_OUTPUTBUFFER_ENABLE            ((uint32_t)0x00000000)
+#define DAC_OUTPUTBUFFER_DISABLE           ((uint32_t)DAC_CR_BOFF1)
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Channel_selection DAC Channel Selection
+  * @{
+  */
+#define DAC_CHANNEL_1                      ((uint32_t)0x00000000)
+#define DAC_CHANNEL_2                      ((uint32_t)0x00000010)
+/**
+  * @}
+  */
+
+/** @defgroup DAC_data_alignment DAC Data Alignment
+  * @{
+  */
+#define DAC_ALIGN_12B_R                    ((uint32_t)0x00000000)
+#define DAC_ALIGN_12B_L                    ((uint32_t)0x00000004)
+#define DAC_ALIGN_8B_R                     ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup DAC_flags_definition DAC Flags Definition
+  * @{
+  */
+#define DAC_FLAG_DMAUDR1                   ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_FLAG_DMAUDR2                   ((uint32_t)DAC_SR_DMAUDR2)
+/**
+  * @}
+  */
+
+/** @defgroup DAC_IT_definition DAC IT Definition
+  * @{
+  */
+#define DAC_IT_DMAUDR1                   ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_IT_DMAUDR2                   ((uint32_t)DAC_SR_DMAUDR2)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DAC_Exported_Macros DAC Exported Macros
+  * @{
+  */
+
+/** @brief Reset DAC handle state
+  * @param  __HANDLE__: specifies the DAC handle.
+  * @retval None
+  */
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+
+/** @brief Enable the DAC channel
+  * @param  __HANDLE__: specifies the DAC handle.
+  * @param  __DAC_Channel__: specifies the DAC channel
+  * @retval None
+  */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) ((__HANDLE__)->Instance->CR |=  (DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Disable the DAC channel
+  * @param  __HANDLE__: specifies the DAC handle
+  * @param  __DAC_Channel__: specifies the DAC channel.
+  * @retval None
+  */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) ((__HANDLE__)->Instance->CR &=  ~(DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Enable the DAC interrupt
+  * @param  __HANDLE__: specifies the DAC handle
+  * @param  __INTERRUPT__: specifies the DAC interrupt.
+  * @retval None
+  */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/** @brief Disable the DAC interrupt
+  * @param  __HANDLE__: specifies the DAC handle
+  * @param  __INTERRUPT__: specifies the DAC interrupt.
+  * @retval None
+  */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/** @brief  Checks if the specified DAC interrupt source is enabled or disabled.
+  * @param __HANDLE__: DAC handle
+  * @param __INTERRUPT__: DAC interrupt source to check
+  *          This parameter can be any combination of the following values:
+  *            @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
+  *            @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
+  * @retval State of interruption (SET or RESET)
+  */
+#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief  Get the selected DAC's flag status.
+  * @param  __HANDLE__: specifies the DAC handle.
+  * @param  __FLAG__: specifies the flag to clear.
+  *         This parameter can be any combination of the following values:
+  *            @arg DAC_FLAG_DMAUDR1: DMA underrun 1 flag
+  *            @arg DAC_FLAG_DMAUDR2: DMA underrun 2 flag
+  * @retval None
+  */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the DAC's flag.
+  * @param  __HANDLE__: specifies the DAC handle.
+  * @param  __FLAG__: specifies the flag to clear.
+  *         This parameter can be any combination of the following values:
+  *            @arg DAC_FLAG_DMAUDR1: DMA underrun 1 flag
+  *            @arg DAC_FLAG_DMAUDR2: DMA underrun 2 flag
+  * @retval None
+  */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+/**
+  * @}
+  */
+
+/* Include DAC HAL Extension module */
+#include "stm32f4xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DAC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions *********************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
+/**
+  * @}
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel);
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
+/**
+  * @}
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral State functions *************************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DAC_Private_Constants DAC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DAC_Private_Macros DAC Private Macros
+  * @{
+  */
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+                             ((ALIGN) == DAC_ALIGN_12B_L) || \
+                             ((ALIGN) == DAC_ALIGN_8B_R))
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+                                 ((CHANNEL) == DAC_CHANNEL_2))
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+                                           ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+                                 ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+/** @brief Set DHR12R1 alignment
+  * @param  __ALIGNMENT__: specifies the DAC alignment
+  * @retval None
+  */
+#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000008) + (__ALIGNMENT__))
+
+/** @brief  Set DHR12R2 alignment
+  * @param  __ALIGNMENT__: specifies the DAC alignment
+  * @retval None
+  */
+#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000014) + (__ALIGNMENT__))
+
+/** @brief  Set DHR12RD alignment
+  * @param  __ALIGNMENT__: specifies the DAC alignment
+  * @retval None
+  */
+#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000020) + (__ALIGNMENT__))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DAC_Private_Functions DAC Private Functions
+  * @{
+  */
+/**
+  * @}
+  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+          STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+          STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac_ex.h
new file mode 100644
index 0000000..d4feea1
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac_ex.h
@@ -0,0 +1,199 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dac.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of DAC HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DAC_EX_H
+#define __STM32F4xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DACEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DACEx_Exported_Constants DAC Exported Constants
+  * @{
+  */
+
+/** @defgroup DACEx_lfsrunmask_triangleamplitude DAC LFS Run Mask Triangle Amplitude
+  * @{
+  */
+#define DAC_LFSRUNMASK_BIT0                ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0             ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0             ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0             ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0             ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0             ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0             ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0             ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0             ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0             ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0            ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0            ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1            ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3            ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7            ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15           ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31           ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63           ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127          ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255          ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511          ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023         ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047         ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095         ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DACEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DACEx_Exported_Functions_Group1
+  * @{
+  */
+/* Extension features functions ***********************************************/
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DACEx_Private_Constants DAC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DACEx_Private_Macros DAC Private Macros
+  * @{
+  */
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DACEx_Private_Functions DAC Private Functions
+  * @{
+  */
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+          STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+          STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DAC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi.h
new file mode 100644
index 0000000..890da27
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi.h
@@ -0,0 +1,515 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dcmi.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of DCMI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DCMI_H
+#define __STM32F4xx_HAL_DCMI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+    defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/* Include DCMI HAL Extended module */
+/* (include on top of file since DCMI structures are defined in extended file) */
+#include "stm32f4xx_hal_dcmi_ex.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DCMI DCMI
+  * @brief DCMI HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Types DCMI Exported Types
+  * @{
+  */
+/**
+  * @brief DCMI Error source
+  */
+typedef enum
+{
+  DCMI_ERROR_SYNC = 1,     /*!< Synchronisation error */
+  DCMI_OVERRUN   = 2,      /*!< DCMI Overrun */
+}DCMI_ErrorTypeDef;
+
+
+/**
+  * @brief  HAL DCMI State structures definition
+  */
+typedef enum
+{
+  HAL_DCMI_STATE_RESET             = 0x00,  /*!< DCMI not yet initialized or disabled  */
+  HAL_DCMI_STATE_READY             = 0x01,  /*!< DCMI initialized and ready for use    */
+  HAL_DCMI_STATE_BUSY              = 0x02,  /*!< DCMI internal processing is ongoing   */
+  HAL_DCMI_STATE_TIMEOUT           = 0x03,  /*!< DCMI timeout state                    */
+  HAL_DCMI_STATE_ERROR             = 0x04   /*!< DCMI error state                      */
+}HAL_DCMI_StateTypeDef;
+
+/**
+  * @brief  DCMI handle Structure definition
+  */
+typedef struct
+{
+  DCMI_TypeDef                  *Instance;           /*!< DCMI Register base address   */
+
+  DCMI_InitTypeDef              Init;                /*!< DCMI parameters              */
+
+  HAL_LockTypeDef               Lock;                /*!< DCMI locking object          */
+
+  __IO HAL_DCMI_StateTypeDef    State;               /*!< DCMI state                   */
+
+  __IO uint32_t                 XferCount;           /*!< DMA transfer counter         */
+
+  __IO uint32_t                 XferSize;            /*!< DMA transfer size            */
+
+  uint32_t                      XferTransferNumber;  /*!< DMA transfer number          */
+
+  uint32_t                      pBuffPtr;            /*!< Pointer to DMA output buffer */
+
+  DMA_HandleTypeDef             *DMA_Handle;         /*!< Pointer to the DMA handler   */
+
+  __IO uint32_t                 ErrorCode;           /*!< DCMI Error code              */
+
+}DCMI_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Constants DCMI Exported Constants
+  * @{
+  */
+
+/** @defgroup DCMI_Error_Code DCMI Error Code
+  * @{
+  */
+#define HAL_DCMI_ERROR_NONE      ((uint32_t)0x00000000)    /*!< No error              */
+#define HAL_DCMI_ERROR_OVF       ((uint32_t)0x00000001)    /*!< Overflow error        */
+#define HAL_DCMI_ERROR_SYNC      ((uint32_t)0x00000002)    /*!< Synchronization error */
+#define HAL_DCMI_ERROR_TIMEOUT   ((uint32_t)0x00000020)    /*!< Timeout error         */
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Capture_Mode DCMI Capture Mode
+  * @{
+  */
+#define DCMI_MODE_CONTINUOUS           ((uint32_t)0x00000000)  /*!< The received data are transferred continuously
+                                                                    into the destination memory through the DMA             */
+#define DCMI_MODE_SNAPSHOT             ((uint32_t)DCMI_CR_CM)  /*!< Once activated, the interface waits for the start of
+                                                                    frame and then transfers a single frame through the DMA */
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Synchronization_Mode DCMI Synchronization Mode
+  * @{
+  */
+#define DCMI_SYNCHRO_HARDWARE        ((uint32_t)0x00000000)   /*!< Hardware synchronization data capture (frame/line start/stop)
+                                                                   is synchronized with the HSYNC/VSYNC signals                  */
+#define DCMI_SYNCHRO_EMBEDDED        ((uint32_t)DCMI_CR_ESS)  /*!< Embedded synchronization data capture is synchronized with
+                                                                   synchronization codes embedded in the data flow               */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_PIXCK_Polarity DCMI PIXCK Polarity
+  * @{
+  */
+#define DCMI_PCKPOLARITY_FALLING    ((uint32_t)0x00000000)      /*!< Pixel clock active on Falling edge */
+#define DCMI_PCKPOLARITY_RISING     ((uint32_t)DCMI_CR_PCKPOL)  /*!< Pixel clock active on Rising edge  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_VSYNC_Polarity DCMI VSYNC Polarity
+  * @{
+  */
+#define DCMI_VSPOLARITY_LOW     ((uint32_t)0x00000000)     /*!< Vertical synchronization active Low  */
+#define DCMI_VSPOLARITY_HIGH    ((uint32_t)DCMI_CR_VSPOL)  /*!< Vertical synchronization active High */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_HSYNC_Polarity DCMI HSYNC Polarity
+  * @{
+  */
+#define DCMI_HSPOLARITY_LOW     ((uint32_t)0x00000000)     /*!< Horizontal synchronization active Low  */
+#define DCMI_HSPOLARITY_HIGH    ((uint32_t)DCMI_CR_HSPOL)  /*!< Horizontal synchronization active High */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_MODE_JPEG DCMI MODE JPEG
+  * @{
+  */
+#define DCMI_JPEG_DISABLE   ((uint32_t)0x00000000)    /*!< Mode JPEG Disabled  */
+#define DCMI_JPEG_ENABLE    ((uint32_t)DCMI_CR_JPEG)  /*!< Mode JPEG Enabled   */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Capture_Rate DCMI Capture Rate
+  * @{
+  */
+#define DCMI_CR_ALL_FRAME            ((uint32_t)0x00000000)      /*!< All frames are captured        */
+#define DCMI_CR_ALTERNATE_2_FRAME    ((uint32_t)DCMI_CR_FCRC_0)  /*!< Every alternate frame captured */
+#define DCMI_CR_ALTERNATE_4_FRAME    ((uint32_t)DCMI_CR_FCRC_1)  /*!< One frame in 4 frames captured */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Extended_Data_Mode DCMI Extended Data Mode
+  * @{
+  */
+#define DCMI_EXTEND_DATA_8B     ((uint32_t)0x00000000)                       /*!< Interface captures 8-bit data on every pixel clock  */
+#define DCMI_EXTEND_DATA_10B    ((uint32_t)DCMI_CR_EDM_0)                    /*!< Interface captures 10-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_12B    ((uint32_t)DCMI_CR_EDM_1)                    /*!< Interface captures 12-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_14B    ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1))  /*!< Interface captures 14-bit data on every pixel clock */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Window_Coordinate DCMI Window Coordinate
+  * @{
+  */
+#define DCMI_WINDOW_COORDINATE    ((uint32_t)0x3FFF)  /*!< Window coordinate */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Window_Height DCMI Window Height
+  * @{
+  */
+#define DCMI_WINDOW_HEIGHT    ((uint32_t)0x1FFF)  /*!< Window Height */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_interrupt_sources  DCMI interrupt sources
+  * @{
+  */
+#define DCMI_IT_FRAME    ((uint32_t)DCMI_IER_FRAME_IE)
+#define DCMI_IT_OVF      ((uint32_t)DCMI_IER_OVF_IE)
+#define DCMI_IT_ERR      ((uint32_t)DCMI_IER_ERR_IE)
+#define DCMI_IT_VSYNC    ((uint32_t)DCMI_IER_VSYNC_IE)
+#define DCMI_IT_LINE     ((uint32_t)DCMI_IER_LINE_IE)
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Flags DCMI Flags
+  * @{
+  */
+
+/**
+  * @brief   DCMI SR register
+  */
+#define DCMI_FLAG_HSYNC     ((uint32_t)0x2001)
+#define DCMI_FLAG_VSYNC     ((uint32_t)0x2002)
+#define DCMI_FLAG_FNE       ((uint32_t)0x2004)
+/**
+  * @brief   DCMI RISR register
+  */
+#define DCMI_FLAG_FRAMERI    ((uint32_t)DCMI_RISR_FRAME_RIS)
+#define DCMI_FLAG_OVFRI      ((uint32_t)DCMI_RISR_OVF_RIS)
+#define DCMI_FLAG_ERRRI      ((uint32_t)DCMI_RISR_ERR_RIS)
+#define DCMI_FLAG_VSYNCRI    ((uint32_t)DCMI_RISR_VSYNC_RIS)
+#define DCMI_FLAG_LINERI     ((uint32_t)DCMI_RISR_LINE_RIS)
+/**
+  * @brief   DCMI MISR register
+  */
+#define DCMI_FLAG_FRAMEMI    ((uint32_t)0x1001)
+#define DCMI_FLAG_OVFMI      ((uint32_t)0x1002)
+#define DCMI_FLAG_ERRMI      ((uint32_t)0x1004)
+#define DCMI_FLAG_VSYNCMI    ((uint32_t)0x1008)
+#define DCMI_FLAG_LINEMI     ((uint32_t)0x1010)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Macros DCMI Exported Macros
+  * @{
+  */
+
+/** @brief Reset DCMI handle state
+  * @param  __HANDLE__: specifies the DCMI handle.
+  * @retval None
+  */
+#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DCMI_STATE_RESET)
+
+/**
+  * @brief  Enable the DCMI.
+  * @param  __HANDLE__: DCMI handle
+  * @retval None
+  */
+#define __HAL_DCMI_ENABLE(__HANDLE__)    ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE)
+
+/**
+  * @brief  Disable the DCMI.
+  * @param  __HANDLE__: DCMI handle
+  * @retval None
+  */
+#define __HAL_DCMI_DISABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE))
+
+/* Interrupt & Flag management */
+/**
+  * @brief  Get the DCMI pending flags.
+  * @param  __HANDLE__: DCMI handle
+  * @param  __FLAG__: Get the specified flag.
+  *         This parameter can be any combination of the following values:
+  *            @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+  *            @arg DCMI_FLAG_OVFRI: Overflow flag mask
+  *            @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+  *            @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+  *            @arg DCMI_FLAG_LINERI: Line flag mask
+  * @retval The state of FLAG.
+  */
+#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\
+((((__FLAG__) & 0x3000) == 0x0)? ((__HANDLE__)->Instance->RISR & (__FLAG__)) :\
+ (((__FLAG__) & 0x2000) == 0x0)? ((__HANDLE__)->Instance->MISR & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__)))
+
+/**
+  * @brief  Clear the DCMI pending flags.
+  * @param  __HANDLE__: DCMI handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *         This parameter can be any combination of the following values:
+  *            @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+  *            @arg DCMI_FLAG_OVFRI: Overflow flag mask
+  *            @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+  *            @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+  *            @arg DCMI_FLAG_LINERI: Line flag mask
+  * @retval None
+  */
+#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+  * @brief  Enable the specified DCMI interrupts.
+  * @param  __HANDLE__:    DCMI handle
+  * @param  __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
+  *         This parameter can be any combination of the following values:
+  *            @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+  *            @arg DCMI_IT_OVF: Overflow interrupt mask
+  *            @arg DCMI_IT_ERR: Synchronization error interrupt mask
+  *            @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+  *            @arg DCMI_IT_LINE: Line interrupt mask
+  * @retval None
+  */
+#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified DCMI interrupts.
+  * @param  __HANDLE__: DCMI handle
+  * @param  __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
+  *         This parameter can be any combination of the following values:
+  *            @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+  *            @arg DCMI_IT_OVF: Overflow interrupt mask
+  *            @arg DCMI_IT_ERR: Synchronization error interrupt mask
+  *            @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+  *            @arg DCMI_IT_LINE: Line interrupt mask
+  * @retval None
+  */
+#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified DCMI interrupt has occurred or not.
+  * @param  __HANDLE__: DCMI handle
+  * @param  __INTERRUPT__: specifies the DCMI interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+  *            @arg DCMI_IT_OVF: Overflow interrupt mask
+  *            @arg DCMI_IT_ERR: Synchronization error interrupt mask
+  *            @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+  *            @arg DCMI_IT_LINE: Line interrupt mask
+  * @retval The state of INTERRUPT.
+  */
+#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DCMI_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DCMI_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi);
+void       HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi);
+/**
+  * @}
+  */
+
+/** @addtogroup DCMI_Exported_Functions_Group2
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi);
+void       HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi);
+/**
+  * @}
+  */
+
+/** @addtogroup DCMI_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef     HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize);
+HAL_StatusTypeDef     HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef     HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi);
+/**
+  * @}
+  */
+
+/** @addtogroup DCMI_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi);
+uint32_t              HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup DCMI_Private_Macros DCMI Private Macros
+  * @{
+  */
+#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \
+                                   ((MODE) == DCMI_MODE_SNAPSHOT))
+
+#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \
+                              ((MODE) == DCMI_SYNCHRO_EMBEDDED))
+
+#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \
+                                      ((POLARITY) == DCMI_PCKPOLARITY_RISING))
+
+#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \
+                                     ((POLARITY) == DCMI_VSPOLARITY_HIGH))
+
+#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \
+                                     ((POLARITY) == DCMI_HSPOLARITY_HIGH))
+
+#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \
+                                     ((JPEG_MODE) == DCMI_JPEG_ENABLE))
+
+#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME)         || \
+                                    ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \
+                                    ((RATE) == DCMI_CR_ALTERNATE_4_FRAME))
+
+#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B)  || \
+                                    ((DATA) == DCMI_EXTEND_DATA_10B) || \
+                                    ((DATA) == DCMI_EXTEND_DATA_12B) || \
+                                    ((DATA) == DCMI_EXTEND_DATA_14B))
+
+#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE)
+
+#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT)
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DCMI_Private_Functions DCMI Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+          STM32F429xx || STM32F439xx || STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DCMI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi_ex.h
new file mode 100644
index 0000000..0a9feb8
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi_ex.h
@@ -0,0 +1,221 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dcmi_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of DCMI Extension HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DCMI_EX_H
+#define __STM32F4xx_HAL_DCMI_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+    defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DCMIEx DCMI Extended
+  * @brief DCMI HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DCMIEx_Exported_Types DCMI Extende Exported Types
+  * @{
+  */
+/**
+  * @brief   DCMIEx Embedded Synchronisation CODE Init structure definition
+  */
+typedef struct
+{
+  uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
+  uint8_t LineStartCode;  /*!< Specifies the code of the line start delimiter.  */
+  uint8_t LineEndCode;    /*!< Specifies the code of the line end delimiter.    */
+  uint8_t FrameEndCode;   /*!< Specifies the code of the frame end delimiter.   */
+}DCMI_CodesInitTypeDef;
+
+/**
+  * @brief   DCMI Init structure definition
+  */
+typedef struct
+{
+  uint32_t  SynchroMode;                /*!< Specifies the Synchronization Mode: Hardware or Embedded.
+                                             This parameter can be a value of @ref DCMI_Synchronization_Mode */
+
+  uint32_t  PCKPolarity;                /*!< Specifies the Pixel clock polarity: Falling or Rising.
+                                             This parameter can be a value of @ref DCMI_PIXCK_Polarity       */
+
+  uint32_t  VSPolarity;                 /*!< Specifies the Vertical synchronization polarity: High or Low.
+                                             This parameter can be a value of @ref DCMI_VSYNC_Polarity       */
+
+  uint32_t  HSPolarity;                 /*!< Specifies the Horizontal synchronization polarity: High or Low.
+                                             This parameter can be a value of @ref DCMI_HSYNC_Polarity       */
+
+  uint32_t  CaptureRate;                /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
+                                             This parameter can be a value of @ref DCMI_Capture_Rate         */
+
+  uint32_t  ExtendedDataMode;           /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
+                                             This parameter can be a value of @ref DCMI_Extended_Data_Mode   */
+
+  DCMI_CodesInitTypeDef SyncroCode;     /*!< Specifies the code of the frame start delimiter.                */
+
+  uint32_t JPEGMode;                    /*!< Enable or Disable the JPEG mode.
+                                             This parameter can be a value of @ref DCMI_MODE_JPEG            */
+#if defined(STM32F446xx)
+  uint32_t ByteSelectMode;              /*!< Specifies the data to be captured by the interface
+                                            This parameter can be a value of @ref DCMIEx_Byte_Select_Mode      */
+
+  uint32_t ByteSelectStart;             /*!< Specifies if the data to be captured by the interface is even or odd
+                                            This parameter can be a value of @ref DCMIEx_Byte_Select_Start     */
+
+  uint32_t LineSelectMode;              /*!< Specifies the line of data to be captured by the interface
+                                            This parameter can be a value of @ref DCMIEx_Line_Select_Mode      */
+
+  uint32_t LineSelectStart;             /*!< Specifies if the line of data to be captured by the interface is even or odd
+                                            This parameter can be a value of @ref DCMIEx_Line_Select_Start     */
+
+#endif /* STM32F446xx */
+}DCMI_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+#if defined(STM32F446xx)
+/** @defgroup DCMIEx_Exported_Constants DCMI Exported Constants
+  * @{
+  */
+
+/** @defgroup DCMIEx_Byte_Select_Mode DCMI Byte Select Mode
+  * @{
+  */
+#define DCMI_BSM_ALL                 ((uint32_t)0x00000000) /*!< Interface captures all received data */
+#define DCMI_BSM_OTHER               ((uint32_t)DCMI_CR_BSM_0) /*!< Interface captures every other byte from the received data */
+#define DCMI_BSM_ALTERNATE_4         ((uint32_t)DCMI_CR_BSM_1) /*!< Interface captures one byte out of four */
+#define DCMI_BSM_ALTERNATE_2         ((uint32_t)(DCMI_CR_BSM_0 | DCMI_CR_BSM_1)) /*!< Interface captures two bytes out of four */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMIEx_Byte_Select_Start DCMI Byte Select Start
+  * @{
+  */
+#define DCMI_OEBS_ODD               ((uint32_t)0x00000000) /*!< Interface captures first data from the frame/line start, second one being dropped */
+#define DCMI_OEBS_EVEN              ((uint32_t)DCMI_CR_OEBS) /*!< Interface captures second data from the frame/line start, first one being dropped */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMIEx_Line_Select_Mode DCMI Line Select Mode
+  * @{
+  */
+#define DCMI_LSM_ALL                 ((uint32_t)0x00000000) /*!< Interface captures all received lines */
+#define DCMI_LSM_ALTERNATE_2         ((uint32_t)DCMI_CR_LSM) /*!< Interface captures one line out of two */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMIEx_Line_Select_Start DCMI Line Select Start
+  * @{
+  */
+#define DCMI_OELS_ODD               ((uint32_t)0x00000000) /*!< Interface captures first line from the frame start, second one being dropped */
+#define DCMI_OELS_EVEN              ((uint32_t)DCMI_CR_OELS) /*!< Interface captures second line from the frame start, first one being dropped */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup DCMIEx_Private_Macros DCMI Extended Private Macros
+  * @{
+  */
+#define IS_DCMI_BYTE_SELECT_MODE(MODE)(((MODE) == DCMI_BSM_ALL) || \
+                                       ((MODE) == DCMI_BSM_OTHER) || \
+                                       ((MODE) == DCMI_BSM_ALTERNATE_4) || \
+                                       ((MODE) == DCMI_BSM_ALTERNATE_2))
+
+#define IS_DCMI_BYTE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OEBS_ODD) || \
+                                            ((POLARITY) == DCMI_OEBS_EVEN))
+
+#define IS_DCMI_LINE_SELECT_MODE(MODE)(((MODE) == DCMI_LSM_ALL) || \
+                                       ((MODE) == DCMI_LSM_ALTERNATE_2))
+
+#define IS_DCMI_LINE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OELS_ODD) || \
+                                            ((POLARITY) == DCMI_OELS_EVEN))
+#endif /* STM32F446xx */
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+          STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DCMI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h
new file mode 100644
index 0000000..8e6be05
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h
@@ -0,0 +1,214 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_def.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   This file contains HAL common defines, enumeration, macros and
+  *          structures definitions.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DEF
+#define __STM32F4xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+#include "Legacy/stm32_hal_legacy.h"
+#include <stdio.h>
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+  * @brief  HAL Status structures definition
+  */
+typedef enum
+{
+  HAL_OK       = 0x00,
+  HAL_ERROR    = 0x01,
+  HAL_BUSY     = 0x02,
+  HAL_TIMEOUT  = 0x03
+} HAL_StatusTypeDef;
+
+/**
+  * @brief  HAL Lock structures definition
+  */
+typedef enum
+{
+  HAL_UNLOCKED = 0x00,
+  HAL_LOCKED   = 0x01
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#define HAL_MAX_DELAY      0xFFFFFFFF
+
+#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__)               \
+                        do{                                                      \
+                              (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+                              (__DMA_HANDLE__).Parent = (__HANDLE__);             \
+                          } while(0)
+
+#define UNUSED(x) ((void)(x))
+
+/** @brief Reset the Handle's State field.
+  * @param __HANDLE__: specifies the Peripheral Handle.
+  * @note  This macro can be used for the following purpose:
+  *          - When the Handle is declared as local variable; before passing it as parameter
+  *            to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+  *            to set to 0 the Handle's "State" field.
+  *            Otherwise, "State" field may have any random value and the first time the function
+  *            HAL_PPP_Init() is called, the low level hardware initialization will be missed
+  *            (i.e. HAL_PPP_MspInit() will not be executed).
+  *          - When there is a need to reconfigure the low level hardware: instead of calling
+  *            HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+  *            In this later function, when the Handle's "State" field is set to 0, it will execute the function
+  *            HAL_PPP_MspInit() which will reconfigure the low level hardware.
+  * @retval None
+  */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
+
+#if (USE_RTOS == 1)
+  /* Reserved for future use */
+  #error �USE_RTOS should be 0 in the current HAL release�
+#else
+  #define __HAL_LOCK(__HANDLE__)                                           \
+                                do{                                        \
+                                    if((__HANDLE__)->Lock == HAL_LOCKED)   \
+                                    {                                      \
+                                       return HAL_BUSY;                    \
+                                    }                                      \
+                                    else                                   \
+                                    {                                      \
+                                       (__HANDLE__)->Lock = HAL_LOCKED;    \
+                                    }                                      \
+                                  }while (0)
+
+  #define __HAL_UNLOCK(__HANDLE__)                                          \
+                                  do{                                       \
+                                      (__HANDLE__)->Lock = HAL_UNLOCKED;    \
+                                    }while (0)
+#endif /* USE_RTOS */
+
+#if  defined ( __GNUC__ )
+  #ifndef __weak
+    #define __weak   __attribute__((weak))
+  #endif /* __weak */
+  #ifndef __packed
+    #define __packed __attribute__((__packed__))
+  #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined   (__GNUC__)        /* GNU Compiler */
+  #ifndef __ALIGN_END
+    #define __ALIGN_END    __attribute__ ((aligned (4)))
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN
+    #define __ALIGN_BEGIN
+  #endif /* __ALIGN_BEGIN */
+#else
+  #ifndef __ALIGN_END
+    #define __ALIGN_END
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN
+    #if defined   (__CC_ARM)      /* ARM Compiler */
+      #define __ALIGN_BEGIN    __align(4)
+    #elif defined (__ICCARM__)    /* IAR Compiler */
+      #define __ALIGN_BEGIN
+    #endif /* __CC_ARM */
+  #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+
+/**
+  * @brief  __RAM_FUNC definition
+  */
+#if defined ( __CC_ARM   )
+/* ARM Compiler
+   ------------
+   RAM functions are defined using the toolchain options.
+   Functions that are executed in RAM should reside in a separate source module.
+   Using the 'Options for File' dialog you can simply change the 'Code / Const'
+   area of a module to a memory space in physical RAM.
+   Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+   dialog.
+*/
+#define __RAM_FUNC HAL_StatusTypeDef
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+   RAM functions are defined using a specific toolchain keyword "__ramfunc".
+*/
+#define __RAM_FUNC __ramfunc HAL_StatusTypeDef
+
+#elif defined   (  __GNUC__  )
+/* GNU Compiler
+   ------------
+  RAM functions are defined using a specific toolchain attribute
+   "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC HAL_StatusTypeDef  __attribute__((section(".RamFunc")))
+
+#endif
+
+/**
+  * @brief  __NOINLINE definition
+  */
+#if defined ( __CC_ARM   ) || defined   (  __GNUC__  )
+/* ARM & GNUCompiler
+   ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F4xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h
new file mode 100644
index 0000000..a5a0440
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h
@@ -0,0 +1,767 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dma.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of DMA HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA_H
+#define __STM32F4xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DMA
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+  * @brief    DMA Exported Types
+  * @{
+  */
+
+/**
+  * @brief  DMA Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Channel;              /*!< Specifies the channel used for the specified stream.
+                                      This parameter can be a value of @ref DMA_Channel_selection                    */
+
+  uint32_t Direction;            /*!< Specifies if the data will be transferred from memory to peripheral,
+                                      from memory to memory or from peripheral to memory.
+                                      This parameter can be a value of @ref DMA_Data_transfer_direction              */
+
+  uint32_t PeriphInc;            /*!< Specifies whether the Peripheral address register should be incremented or not.
+                                      This parameter can be a value of @ref DMA_Peripheral_incremented_mode          */
+
+  uint32_t MemInc;               /*!< Specifies whether the memory address register should be incremented or not.
+                                      This parameter can be a value of @ref DMA_Memory_incremented_mode              */
+
+  uint32_t PeriphDataAlignment;  /*!< Specifies the Peripheral data width.
+                                      This parameter can be a value of @ref DMA_Peripheral_data_size                 */
+
+  uint32_t MemDataAlignment;     /*!< Specifies the Memory data width.
+                                      This parameter can be a value of @ref DMA_Memory_data_size                     */
+
+  uint32_t Mode;                 /*!< Specifies the operation mode of the DMAy Streamx.
+                                      This parameter can be a value of @ref DMA_mode
+                                      @note The circular buffer mode cannot be used if the memory-to-memory
+                                            data transfer is configured on the selected Stream                        */
+
+  uint32_t Priority;             /*!< Specifies the software priority for the DMAy Streamx.
+                                      This parameter can be a value of @ref DMA_Priority_level                       */
+
+  uint32_t FIFOMode;             /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
+                                      This parameter can be a value of @ref DMA_FIFO_direct_mode
+                                      @note The Direct mode (FIFO mode disabled) cannot be used if the
+                                            memory-to-memory data transfer is configured on the selected stream       */
+
+  uint32_t FIFOThreshold;        /*!< Specifies the FIFO threshold level.
+                                      This parameter can be a value of @ref DMA_FIFO_threshold_level                  */
+
+  uint32_t MemBurst;             /*!< Specifies the Burst transfer configuration for the memory transfers.
+                                      It specifies the amount of data to be transferred in a single non interruptible
+                                      transaction.
+                                      This parameter can be a value of @ref DMA_Memory_burst
+                                      @note The burst mode is possible only if the address Increment mode is enabled. */
+
+  uint32_t PeriphBurst;          /*!< Specifies the Burst transfer configuration for the peripheral transfers.
+                                      It specifies the amount of data to be transferred in a single non interruptable
+                                      transaction.
+                                      This parameter can be a value of @ref DMA_Peripheral_burst
+                                      @note The burst mode is possible only if the address Increment mode is enabled. */
+}DMA_InitTypeDef;
+
+
+/**
+  * @brief  HAL DMA State structures definition
+  */
+typedef enum
+{
+  HAL_DMA_STATE_RESET             = 0x00,  /*!< DMA not yet initialized or disabled */
+  HAL_DMA_STATE_READY             = 0x01,  /*!< DMA initialized and ready for use   */
+  HAL_DMA_STATE_READY_MEM0        = 0x11,  /*!< DMA Mem0 process success            */
+  HAL_DMA_STATE_READY_MEM1        = 0x21,  /*!< DMA Mem1 process success            */
+  HAL_DMA_STATE_READY_HALF_MEM0   = 0x31,  /*!< DMA Mem0 Half process success       */
+  HAL_DMA_STATE_READY_HALF_MEM1   = 0x41,  /*!< DMA Mem1 Half process success       */
+  HAL_DMA_STATE_BUSY              = 0x02,  /*!< DMA process is ongoing              */
+  HAL_DMA_STATE_BUSY_MEM0         = 0x12,  /*!< DMA Mem0 process is ongoing         */
+  HAL_DMA_STATE_BUSY_MEM1         = 0x22,  /*!< DMA Mem1 process is ongoing         */
+  HAL_DMA_STATE_TIMEOUT           = 0x03,  /*!< DMA timeout state                   */
+  HAL_DMA_STATE_ERROR             = 0x04,  /*!< DMA error state                     */
+}HAL_DMA_StateTypeDef;
+
+/**
+  * @brief  HAL DMA Error Code structure definition
+  */
+typedef enum
+{
+  HAL_DMA_FULL_TRANSFER      = 0x00,    /*!< Full transfer     */
+  HAL_DMA_HALF_TRANSFER      = 0x01,    /*!< Half Transfer     */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/**
+  * @brief  DMA handle Structure definition
+  */
+typedef struct __DMA_HandleTypeDef
+{
+  DMA_Stream_TypeDef         *Instance;                                                    /*!< Register base address                  */
+
+  DMA_InitTypeDef            Init;                                                         /*!< DMA communication parameters           */
+
+  HAL_LockTypeDef            Lock;                                                         /*!< DMA locking object                     */
+
+  __IO HAL_DMA_StateTypeDef  State;                                                        /*!< DMA transfer state                     */
+
+  void                       *Parent;                                                      /*!< Parent object state                    */
+
+  void                       (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma);     /*!< DMA transfer complete callback         */
+
+  void                       (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback    */
+
+  void                       (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma);   /*!< DMA transfer complete Memory1 callback */
+
+  void                       (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma);    /*!< DMA transfer error callback            */
+
+ __IO uint32_t              ErrorCode;                                                    /*!< DMA Error code                          */
+}DMA_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+  * @brief    DMA Exported constants
+  * @{
+  */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+  * @brief    DMA Error Code
+  * @{
+  */
+#define HAL_DMA_ERROR_NONE      ((uint32_t)0x00000000)    /*!< No error             */
+#define HAL_DMA_ERROR_TE        ((uint32_t)0x00000001)    /*!< Transfer error       */
+#define HAL_DMA_ERROR_FE        ((uint32_t)0x00000002)    /*!< FIFO error           */
+#define HAL_DMA_ERROR_DME       ((uint32_t)0x00000004)    /*!< Direct Mode error    */
+#define HAL_DMA_ERROR_TIMEOUT   ((uint32_t)0x00000020)    /*!< Timeout error        */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Channel_selection DMA Channel selection
+  * @brief    DMA channel selection
+  * @{
+  */
+#define DMA_CHANNEL_0        ((uint32_t)0x00000000)  /*!< DMA Channel 0 */
+#define DMA_CHANNEL_1        ((uint32_t)0x02000000)  /*!< DMA Channel 1 */
+#define DMA_CHANNEL_2        ((uint32_t)0x04000000)  /*!< DMA Channel 2 */
+#define DMA_CHANNEL_3        ((uint32_t)0x06000000)  /*!< DMA Channel 3 */
+#define DMA_CHANNEL_4        ((uint32_t)0x08000000)  /*!< DMA Channel 4 */
+#define DMA_CHANNEL_5        ((uint32_t)0x0A000000)  /*!< DMA Channel 5 */
+#define DMA_CHANNEL_6        ((uint32_t)0x0C000000)  /*!< DMA Channel 6 */
+#define DMA_CHANNEL_7        ((uint32_t)0x0E000000)  /*!< DMA Channel 7 */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+  * @brief    DMA data transfer direction
+  * @{
+  */
+#define DMA_PERIPH_TO_MEMORY         ((uint32_t)0x00000000)      /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH         ((uint32_t)DMA_SxCR_DIR_0)  /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY         ((uint32_t)DMA_SxCR_DIR_1)  /*!< Memory to memory direction     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+  * @brief    DMA peripheral incremented mode
+  * @{
+  */
+#define DMA_PINC_ENABLE        ((uint32_t)DMA_SxCR_PINC)  /*!< Peripheral increment mode enable  */
+#define DMA_PINC_DISABLE       ((uint32_t)0x00000000)     /*!< Peripheral increment mode disable */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+  * @brief    DMA memory incremented mode
+  * @{
+  */
+#define DMA_MINC_ENABLE         ((uint32_t)DMA_SxCR_MINC)  /*!< Memory increment mode enable  */
+#define DMA_MINC_DISABLE        ((uint32_t)0x00000000)     /*!< Memory increment mode disable */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+  * @brief    DMA peripheral data size
+  * @{
+  */
+#define DMA_PDATAALIGN_BYTE          ((uint32_t)0x00000000)        /*!< Peripheral data alignment: Byte     */
+#define DMA_PDATAALIGN_HALFWORD      ((uint32_t)DMA_SxCR_PSIZE_0)  /*!< Peripheral data alignment: HalfWord */
+#define DMA_PDATAALIGN_WORD          ((uint32_t)DMA_SxCR_PSIZE_1)  /*!< Peripheral data alignment: Word     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+  * @brief    DMA memory data size
+  * @{
+  */
+#define DMA_MDATAALIGN_BYTE          ((uint32_t)0x00000000)        /*!< Memory data alignment: Byte     */
+#define DMA_MDATAALIGN_HALFWORD      ((uint32_t)DMA_SxCR_MSIZE_0)  /*!< Memory data alignment: HalfWord */
+#define DMA_MDATAALIGN_WORD          ((uint32_t)DMA_SxCR_MSIZE_1)  /*!< Memory data alignment: Word     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_mode DMA mode
+  * @brief    DMA mode
+  * @{
+  */
+#define DMA_NORMAL         ((uint32_t)0x00000000)       /*!< Normal mode                  */
+#define DMA_CIRCULAR       ((uint32_t)DMA_SxCR_CIRC)    /*!< Circular mode                */
+#define DMA_PFCTRL         ((uint32_t)DMA_SxCR_PFCTRL)  /*!< Peripheral flow control mode */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+  * @brief    DMA priority levels
+  * @{
+  */
+#define DMA_PRIORITY_LOW             ((uint32_t)0x00000000)     /*!< Priority level: Low       */
+#define DMA_PRIORITY_MEDIUM          ((uint32_t)DMA_SxCR_PL_0)  /*!< Priority level: Medium    */
+#define DMA_PRIORITY_HIGH            ((uint32_t)DMA_SxCR_PL_1)  /*!< Priority level: High      */
+#define DMA_PRIORITY_VERY_HIGH       ((uint32_t)DMA_SxCR_PL)    /*!< Priority level: Very High */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode
+  * @brief    DMA FIFO direct mode
+  * @{
+  */
+#define DMA_FIFOMODE_DISABLE        ((uint32_t)0x00000000)       /*!< FIFO mode disable */
+#define DMA_FIFOMODE_ENABLE         ((uint32_t)DMA_SxFCR_DMDIS)  /*!< FIFO mode enable  */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level
+  * @brief    DMA FIFO level
+  * @{
+  */
+#define DMA_FIFO_THRESHOLD_1QUARTERFULL       ((uint32_t)0x00000000)       /*!< FIFO threshold 1 quart full configuration  */
+#define DMA_FIFO_THRESHOLD_HALFFULL           ((uint32_t)DMA_SxFCR_FTH_0)  /*!< FIFO threshold half full configuration     */
+#define DMA_FIFO_THRESHOLD_3QUARTERSFULL      ((uint32_t)DMA_SxFCR_FTH_1)  /*!< FIFO threshold 3 quarts full configuration */
+#define DMA_FIFO_THRESHOLD_FULL               ((uint32_t)DMA_SxFCR_FTH)    /*!< FIFO threshold full configuration          */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Memory_burst DMA Memory burst
+  * @brief    DMA memory burst
+  * @{
+  */
+#define DMA_MBURST_SINGLE       ((uint32_t)0x00000000)
+#define DMA_MBURST_INC4         ((uint32_t)DMA_SxCR_MBURST_0)
+#define DMA_MBURST_INC8         ((uint32_t)DMA_SxCR_MBURST_1)
+#define DMA_MBURST_INC16        ((uint32_t)DMA_SxCR_MBURST)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Peripheral_burst DMA Peripheral burst
+  * @brief    DMA peripheral burst
+  * @{
+  */
+#define DMA_PBURST_SINGLE       ((uint32_t)0x00000000)
+#define DMA_PBURST_INC4         ((uint32_t)DMA_SxCR_PBURST_0)
+#define DMA_PBURST_INC8         ((uint32_t)DMA_SxCR_PBURST_1)
+#define DMA_PBURST_INC16        ((uint32_t)DMA_SxCR_PBURST)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+  * @brief    DMA interrupts definition
+  * @{
+  */
+#define DMA_IT_TC                         ((uint32_t)DMA_SxCR_TCIE)
+#define DMA_IT_HT                         ((uint32_t)DMA_SxCR_HTIE)
+#define DMA_IT_TE                         ((uint32_t)DMA_SxCR_TEIE)
+#define DMA_IT_DME                        ((uint32_t)DMA_SxCR_DMEIE)
+#define DMA_IT_FE                         ((uint32_t)0x00000080)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+  * @brief    DMA flag definitions
+  * @{
+  */
+#define DMA_FLAG_FEIF0_4                    ((uint32_t)0x00800001)
+#define DMA_FLAG_DMEIF0_4                   ((uint32_t)0x00800004)
+#define DMA_FLAG_TEIF0_4                    ((uint32_t)0x00000008)
+#define DMA_FLAG_HTIF0_4                    ((uint32_t)0x00000010)
+#define DMA_FLAG_TCIF0_4                    ((uint32_t)0x00000020)
+#define DMA_FLAG_FEIF1_5                    ((uint32_t)0x00000040)
+#define DMA_FLAG_DMEIF1_5                   ((uint32_t)0x00000100)
+#define DMA_FLAG_TEIF1_5                    ((uint32_t)0x00000200)
+#define DMA_FLAG_HTIF1_5                    ((uint32_t)0x00000400)
+#define DMA_FLAG_TCIF1_5                    ((uint32_t)0x00000800)
+#define DMA_FLAG_FEIF2_6                    ((uint32_t)0x00010000)
+#define DMA_FLAG_DMEIF2_6                   ((uint32_t)0x00040000)
+#define DMA_FLAG_TEIF2_6                    ((uint32_t)0x00080000)
+#define DMA_FLAG_HTIF2_6                    ((uint32_t)0x00100000)
+#define DMA_FLAG_TCIF2_6                    ((uint32_t)0x00200000)
+#define DMA_FLAG_FEIF3_7                    ((uint32_t)0x00400000)
+#define DMA_FLAG_DMEIF3_7                   ((uint32_t)0x01000000)
+#define DMA_FLAG_TEIF3_7                    ((uint32_t)0x02000000)
+#define DMA_FLAG_HTIF3_7                    ((uint32_t)0x04000000)
+#define DMA_FLAG_TCIF3_7                    ((uint32_t)0x08000000)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DMA handle state
+  * @param  __HANDLE__: specifies the DMA handle.
+  * @retval None
+  */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+  * @brief  Return the current DMA Stream FIFO filled level.
+  * @param  __HANDLE__: DMA handle
+  * @retval The FIFO filling state.
+  *           - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
+  *                                              and not empty.
+  *           - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
+  *           - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
+  *           - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
+  *           - DMA_FIFOStatus_Empty: when FIFO is empty
+  *           - DMA_FIFOStatus_Full: when FIFO is full
+  */
+#define __HAL_DMA_GET_FS(__HANDLE__)      (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
+
+/**
+  * @brief  Enable the specified DMA Stream.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_ENABLE(__HANDLE__)      ((__HANDLE__)->Instance->CR |=  DMA_SxCR_EN)
+
+/**
+  * @brief  Disable the specified DMA Stream.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_DISABLE(__HANDLE__)     ((__HANDLE__)->Instance->CR &=  ~DMA_SxCR_EN)
+
+/* Interrupt & Flag management */
+
+/**
+  * @brief  Return the current DMA Stream transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer complete flag index.
+  */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
+   DMA_FLAG_TCIF3_7)
+
+/**
+  * @brief  Return the current DMA Stream half transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified half transfer complete flag index.
+  */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
+   DMA_FLAG_HTIF3_7)
+
+/**
+  * @brief  Return the current DMA Stream transfer error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
+   DMA_FLAG_TEIF3_7)
+
+/**
+  * @brief  Return the current DMA Stream FIFO error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified FIFO error flag index.
+  */
+#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
+   DMA_FLAG_FEIF3_7)
+
+/**
+  * @brief  Return the current DMA Stream direct mode error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified direct mode error flag index.
+  */
+#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
+   DMA_FLAG_DMEIF3_7)
+
+/**
+  * @brief  Get the DMA Stream pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCIFx: Transfer complete flag.
+  *            @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+  *            @arg DMA_FLAG_TEIFx: Transfer error flag.
+  *            @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+  *            @arg DMA_FLAG_FEIFx: FIFO error flag.
+  *         Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
+
+/**
+  * @brief  Clear the DMA Stream pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCIFx: Transfer complete flag.
+  *            @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+  *            @arg DMA_FLAG_TEIFx: Transfer error flag.
+  *            @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+  *            @arg DMA_FLAG_FEIFx: FIFO error flag.
+  *         Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+  * @retval None
+  */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
+
+/**
+  * @brief  Enable the specified DMA Stream interrupts.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+  *        This parameter can be any combination of the following values:
+  *           @arg DMA_IT_TC: Transfer complete interrupt mask.
+  *           @arg DMA_IT_HT: Half transfer complete interrupt mask.
+  *           @arg DMA_IT_TE: Transfer error interrupt mask.
+  *           @arg DMA_IT_FE: FIFO error interrupt mask.
+  *           @arg DMA_IT_DME: Direct mode error interrupt.
+  * @retval None
+  */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__)   (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
+
+/**
+  * @brief  Disable the specified DMA Stream interrupts.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+  *         This parameter can be any combination of the following values:
+  *            @arg DMA_IT_TC: Transfer complete interrupt mask.
+  *            @arg DMA_IT_HT: Half transfer complete interrupt mask.
+  *            @arg DMA_IT_TE: Transfer error interrupt mask.
+  *            @arg DMA_IT_FE: FIFO error interrupt mask.
+  *            @arg DMA_IT_DME: Direct mode error interrupt.
+  * @retval None
+  */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__)  (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
+
+/**
+  * @brief  Check whether the specified DMA Stream interrupt is enabled or disabled.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg DMA_IT_TC: Transfer complete interrupt mask.
+  *            @arg DMA_IT_HT: Half transfer complete interrupt mask.
+  *            @arg DMA_IT_TE: Transfer error interrupt mask.
+  *            @arg DMA_IT_FE: FIFO error interrupt mask.
+  *            @arg DMA_IT_DME: Direct mode error interrupt.
+  * @retval The state of DMA_IT.
+  */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)  (((__INTERRUPT__) != DMA_IT_FE)? \
+                                                        ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
+                                                        ((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
+
+/**
+  * @brief  Writes the number of data units to be transferred on the DMA Stream.
+  * @param  __HANDLE__: DMA handle
+  * @param  __COUNTER__: Number of data units to be transferred (from 0 to 65535)
+  *          Number of data items depends only on the Peripheral data format.
+  *
+  * @note   If Peripheral data format is Bytes: number of data units is equal
+  *         to total number of bytes to be transferred.
+  *
+  * @note   If Peripheral data format is Half-Word: number of data units is
+  *         equal to total number of bytes to be transferred / 2.
+  *
+  * @note   If Peripheral data format is Word: number of data units is equal
+  *         to total  number of bytes to be transferred / 4.
+  *
+  * @retval The number of remaining data units in the current DMAy Streamx transfer.
+  */
+#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
+
+/**
+  * @brief  Returns the number of remaining data units in the current DMAy Streamx transfer.
+  * @param  __HANDLE__: DMA handle
+  *
+  * @retval The number of remaining data units in the current DMA Stream transfer.
+  */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
+
+
+/* Include DMA HAL Extension module */
+#include "stm32f4xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Functions DMA Exported Functions
+  * @brief    DMA Exported functions
+  * @{
+  */
+
+/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief   Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions
+  * @brief   I/O operation functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void              HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
+  * @brief    Peripheral State functions
+  * @{
+  */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t             HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+/* Private Constants -------------------------------------------------------------*/
+/** @defgroup DMA_Private_Constants DMA Private Constants
+  * @brief    DMA private defines and constants
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA_Private_Macros DMA Private Macros
+  * @brief    DMA private macros
+  * @{
+  */
+#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
+                                 ((CHANNEL) == DMA_CHANNEL_1) || \
+                                 ((CHANNEL) == DMA_CHANNEL_2) || \
+                                 ((CHANNEL) == DMA_CHANNEL_3) || \
+                                 ((CHANNEL) == DMA_CHANNEL_4) || \
+                                 ((CHANNEL) == DMA_CHANNEL_5) || \
+                                 ((CHANNEL) == DMA_CHANNEL_6) || \
+                                 ((CHANNEL) == DMA_CHANNEL_7))
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+                                     ((DIRECTION) == DMA_MEMORY_TO_PERIPH)  || \
+                                     ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+                                            ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE)  || \
+                                        ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE)     || \
+                                           ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+                                           ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE)     || \
+                                       ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+                                       ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL )  || \
+                           ((MODE) == DMA_CIRCULAR) || \
+                           ((MODE) == DMA_PFCTRL))
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW )   || \
+                                   ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+                                   ((PRIORITY) == DMA_PRIORITY_HIGH)   || \
+                                   ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+
+#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
+                                       ((STATE) == DMA_FIFOMODE_ENABLE))
+
+#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
+                                          ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL)      || \
+                                          ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
+                                          ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
+
+#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
+                                    ((BURST) == DMA_MBURST_INC4)   || \
+                                    ((BURST) == DMA_MBURST_INC8)   || \
+                                    ((BURST) == DMA_MBURST_INC16))
+
+#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
+                                        ((BURST) == DMA_PBURST_INC4)   || \
+                                        ((BURST) == DMA_PBURST_INC8)   || \
+                                        ((BURST) == DMA_PBURST_INC16))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMA_Private_Functions DMA Private Functions
+  * @brief    DMA private  functions
+  * @{
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h
new file mode 100644
index 0000000..dbe02fa
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h
@@ -0,0 +1,554 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dma2d.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of DMA2D HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA2D_H
+#define __STM32F4xx_HAL_DMA2D_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DMA2D DMA2D
+  * @brief DMA2D HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Types DMA2D Exported Types
+  * @{
+  */
+#define MAX_DMA2D_LAYER  2
+
+/**
+  * @brief DMA2D color Structure definition
+  */
+typedef struct
+{
+  uint32_t Blue;               /*!< Configures the blue value.
+                                    This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint32_t Green;              /*!< Configures the green value.
+                                    This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint32_t Red;                /*!< Configures the red value.
+                                    This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+} DMA2D_ColorTypeDef;
+
+/**
+  * @brief DMA2D CLUT Structure definition
+  */
+typedef struct
+{
+  uint32_t *pCLUT;                  /*!< Configures the DMA2D CLUT memory address.*/
+
+  uint32_t CLUTColorMode;           /*!< configures the DMA2D CLUT color mode.
+                                         This parameter can be one value of @ref DMA2D_CLUT_CM */
+
+  uint32_t Size;                    /*!< configures the DMA2D CLUT size.
+                                         This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+} DMA2D_CLUTCfgTypeDef;
+
+/**
+  * @brief DMA2D Init structure definition
+  */
+typedef struct
+{
+  uint32_t             Mode;               /*!< configures the DMA2D transfer mode.
+                                                This parameter can be one value of @ref DMA2D_Mode */
+
+  uint32_t             ColorMode;          /*!< configures the color format of the output image.
+                                                This parameter can be one value of @ref DMA2D_Color_Mode */
+
+  uint32_t             OutputOffset;       /*!< Specifies the Offset value.
+                                                This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+} DMA2D_InitTypeDef;
+
+/**
+  * @brief DMA2D Layer structure definition
+  */
+typedef struct
+{
+  uint32_t             InputOffset;       /*!< configures the DMA2D foreground offset.
+                                               This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+
+  uint32_t             InputColorMode;    /*!< configures the DMA2D foreground color mode .
+                                               This parameter can be one value of @ref DMA2D_Input_Color_Mode */
+
+  uint32_t             AlphaMode;         /*!< configures the DMA2D foreground alpha mode.
+                                               This parameter can be one value of @ref DMA2D_ALPHA_MODE */
+
+  uint32_t             InputAlpha;        /*!< Specifies the DMA2D foreground alpha value and color value in case of A8 or A4 color mode.
+                                               This parameter must be a number between Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF
+                                               in case of A8 or A4 color mode (ARGB).
+                                               Otherwise, This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+
+} DMA2D_LayerCfgTypeDef;
+
+/**
+  * @brief  HAL DMA2D State structures definition
+  */
+typedef enum
+{
+  HAL_DMA2D_STATE_RESET             = 0x00,    /*!< DMA2D not yet initialized or disabled       */
+  HAL_DMA2D_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use    */
+  HAL_DMA2D_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing              */
+  HAL_DMA2D_STATE_TIMEOUT           = 0x03,    /*!< Timeout state                               */
+  HAL_DMA2D_STATE_ERROR             = 0x04,    /*!< DMA2D state error                           */
+  HAL_DMA2D_STATE_SUSPEND           = 0x05     /*!< DMA2D process is suspended                  */
+}HAL_DMA2D_StateTypeDef;
+
+/**
+  * @brief  DMA2D handle Structure definition
+  */
+typedef struct __DMA2D_HandleTypeDef
+{
+  DMA2D_TypeDef               *Instance;                                                    /*!< DMA2D Register base address       */
+
+  DMA2D_InitTypeDef           Init;                                                         /*!< DMA2D communication parameters    */
+
+  void                        (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d);  /*!< DMA2D transfer complete callback  */
+
+  void                        (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback     */
+
+  DMA2D_LayerCfgTypeDef       LayerCfg[MAX_DMA2D_LAYER];                                    /*!< DMA2D Layers parameters           */
+
+  HAL_LockTypeDef             Lock;                                                         /*!< DMA2D Lock                        */
+
+  __IO HAL_DMA2D_StateTypeDef State;                                                        /*!< DMA2D transfer state              */
+
+  __IO uint32_t               ErrorCode;                                                    /*!< DMA2D Error code                  */
+} DMA2D_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants
+  * @{
+  */
+
+/** @defgroup DMA2D_Error_Code DMA2D Error Code
+  * @{
+  */
+#define HAL_DMA2D_ERROR_NONE      ((uint32_t)0x00000000)    /*!< No error             */
+#define HAL_DMA2D_ERROR_TE        ((uint32_t)0x00000001)    /*!< Transfer error       */
+#define HAL_DMA2D_ERROR_CE        ((uint32_t)0x00000002)    /*!< Configuration error  */
+#define HAL_DMA2D_ERROR_TIMEOUT   ((uint32_t)0x00000020)    /*!< Timeout error        */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Mode DMA2D Mode
+  * @{
+  */
+#define DMA2D_M2M                            ((uint32_t)0x00000000)             /*!< DMA2D memory to memory transfer mode */
+#define DMA2D_M2M_PFC                        ((uint32_t)0x00010000)             /*!< DMA2D memory to memory with pixel format conversion transfer mode */
+#define DMA2D_M2M_BLEND                      ((uint32_t)0x00020000)             /*!< DMA2D memory to memory with blending transfer mode */
+#define DMA2D_R2M                            ((uint32_t)0x00030000)             /*!< DMA2D register to memory transfer mode */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Color_Mode DMA2D Color Mode
+  * @{
+  */
+#define DMA2D_ARGB8888                       ((uint32_t)0x00000000)             /*!< ARGB8888 DMA2D color mode */
+#define DMA2D_RGB888                         ((uint32_t)0x00000001)             /*!< RGB888 DMA2D color mode   */
+#define DMA2D_RGB565                         ((uint32_t)0x00000002)             /*!< RGB565 DMA2D color mode   */
+#define DMA2D_ARGB1555                       ((uint32_t)0x00000003)             /*!< ARGB1555 DMA2D color mode */
+#define DMA2D_ARGB4444                       ((uint32_t)0x00000004)             /*!< ARGB4444 DMA2D color mode */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_COLOR_VALUE DMA2D COLOR VALUE
+  * @{
+  */
+#define COLOR_VALUE             ((uint32_t)0x000000FF)                          /*!< color value mask */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_SIZE DMA2D SIZE
+  * @{
+  */
+#define DMA2D_PIXEL          (DMA2D_NLR_PL >> 16)                               /*!< DMA2D pixel per line */
+#define DMA2D_LINE           DMA2D_NLR_NL                                       /*!< DMA2D number of line */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Offset DMA2D Offset
+  * @{
+  */
+#define DMA2D_OFFSET      DMA2D_FGOR_LO            /*!< Line Offset */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode
+  * @{
+  */
+#define CM_ARGB8888        ((uint32_t)0x00000000)                               /*!< ARGB8888 color mode */
+#define CM_RGB888          ((uint32_t)0x00000001)                               /*!< RGB888 color mode */
+#define CM_RGB565          ((uint32_t)0x00000002)                               /*!< RGB565 color mode */
+#define CM_ARGB1555        ((uint32_t)0x00000003)                               /*!< ARGB1555 color mode */
+#define CM_ARGB4444        ((uint32_t)0x00000004)                               /*!< ARGB4444 color mode */
+#define CM_L8              ((uint32_t)0x00000005)                               /*!< L8 color mode */
+#define CM_AL44            ((uint32_t)0x00000006)                               /*!< AL44 color mode */
+#define CM_AL88            ((uint32_t)0x00000007)                               /*!< AL88 color mode */
+#define CM_L4              ((uint32_t)0x00000008)                               /*!< L4 color mode */
+#define CM_A8              ((uint32_t)0x00000009)                               /*!< A8 color mode */
+#define CM_A4              ((uint32_t)0x0000000A)                               /*!< A4 color mode */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_ALPHA_MODE DMA2D ALPHA MODE
+  * @{
+  */
+#define DMA2D_NO_MODIF_ALPHA       ((uint32_t)0x00000000)  /*!< No modification of the alpha channel value */
+#define DMA2D_REPLACE_ALPHA        ((uint32_t)0x00000001)  /*!< Replace original alpha channel value by programmed alpha value */
+#define DMA2D_COMBINE_ALPHA        ((uint32_t)0x00000002)  /*!< Replace original alpha channel value by programmed alpha value
+                                                                with original alpha channel value                              */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_CLUT_CM DMA2D CLUT CM
+  * @{
+  */
+#define DMA2D_CCM_ARGB8888    ((uint32_t)0x00000000)    /*!< ARGB8888 DMA2D C-LUT color mode */
+#define DMA2D_CCM_RGB888      ((uint32_t)0x00000001)    /*!< RGB888 DMA2D C-LUT color mode   */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Size_Clut DMA2D Size Clut
+  * @{
+  */
+#define DMA2D_CLUT_SIZE    (DMA2D_FGPFCCR_CS >> 8)    /*!< DMA2D C-LUT size */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_DeadTime DMA2D DeadTime
+  * @{
+  */
+#define LINE_WATERMARK            DMA2D_LWR_LW
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Interrupts DMA2D Interrupts
+  * @{
+  */
+#define DMA2D_IT_CE             DMA2D_CR_CEIE    /*!< Configuration Error Interrupt */
+#define DMA2D_IT_CTC            DMA2D_CR_CTCIE   /*!< C-LUT Transfer Complete Interrupt */
+#define DMA2D_IT_CAE            DMA2D_CR_CAEIE   /*!< C-LUT Access Error Interrupt */
+#define DMA2D_IT_TW             DMA2D_CR_TWIE    /*!< Transfer Watermark Interrupt */
+#define DMA2D_IT_TC             DMA2D_CR_TCIE    /*!< Transfer Complete Interrupt */
+#define DMA2D_IT_TE             DMA2D_CR_TEIE    /*!< Transfer Error Interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Flag DMA2D Flag
+  * @{
+  */
+#define DMA2D_FLAG_CE          DMA2D_ISR_CEIF     /*!< Configuration Error Interrupt Flag */
+#define DMA2D_FLAG_CTC         DMA2D_ISR_CTCIF    /*!< C-LUT Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_CAE         DMA2D_ISR_CAEIF    /*!< C-LUT Access Error Interrupt Flag */
+#define DMA2D_FLAG_TW          DMA2D_ISR_TWIF     /*!< Transfer Watermark Interrupt Flag */
+#define DMA2D_FLAG_TC          DMA2D_ISR_TCIF     /*!< Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_TE          DMA2D_ISR_TEIF     /*!< Transfer Error Interrupt Flag */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros
+  * @{
+  */
+
+/** @brief Reset DMA2D handle state
+  * @param  __HANDLE__: specifies the DMA2D handle.
+  * @retval None
+  */
+#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)
+
+/**
+  * @brief  Enable the DMA2D.
+  * @param  __HANDLE__: DMA2D handle
+  * @retval None.
+  */
+#define __HAL_DMA2D_ENABLE(__HANDLE__)        ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
+
+/**
+  * @brief  Disable the DMA2D.
+  * @param  __HANDLE__: DMA2D handle
+  * @retval None.
+  */
+#define __HAL_DMA2D_DISABLE(__HANDLE__)        ((__HANDLE__)->Instance->CR &= ~DMA2D_CR_START)
+
+/* Interrupt & Flag management */
+/**
+  * @brief  Get the DMA2D pending flags.
+  * @param  __HANDLE__: DMA2D handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_FLAG_CE:  Configuration error flag
+  *            @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
+  *            @arg DMA2D_FLAG_CAE: C-LUT access error flag
+  *            @arg DMA2D_FLAG_TW:  Transfer Watermark flag
+  *            @arg DMA2D_FLAG_TC:  Transfer complete flag
+  *            @arg DMA2D_FLAG_TE:  Transfer error flag
+  * @retval The state of FLAG.
+  */
+#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+  * @brief  Clears the DMA2D pending flags.
+  * @param  __HANDLE__: DMA2D handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_FLAG_CE:  Configuration error flag
+  *            @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
+  *            @arg DMA2D_FLAG_CAE: C-LUT access error flag
+  *            @arg DMA2D_FLAG_TW:  Transfer Watermark flag
+  *            @arg DMA2D_FLAG_TC:  Transfer complete flag
+  *            @arg DMA2D_FLAG_TE:  Transfer error flag
+  * @retval None
+  */
+#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))
+
+/**
+  * @brief  Enables the specified DMA2D interrupts.
+  * @param  __HANDLE__: DMA2D handle
+  * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be enabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_IT_CE:  Configuration error interrupt mask
+  *            @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+  *            @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+  *            @arg DMA2D_IT_TW:  Transfer Watermark interrupt mask
+  *            @arg DMA2D_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified DMA2D interrupts.
+  * @param  __HANDLE__: DMA2D handle
+  * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_IT_CE:  Configuration error interrupt mask
+  *            @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+  *            @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+  *            @arg DMA2D_IT_TW:  Transfer Watermark interrupt mask
+  *            @arg DMA2D_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified DMA2D interrupt has occurred or not.
+  * @param  __HANDLE__: DMA2D handle
+  * @param  __INTERRUPT__: specifies the DMA2D interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg DMA2D_IT_CE:  Configuration error interrupt mask
+  *            @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+  *            @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+  *            @arg DMA2D_IT_TW:  Transfer Watermark interrupt mask
+  *            @arg DMA2D_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
+  * @retval The state of INTERRUPT.
+  */
+#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Functions DMA2D Exported Functions
+  * @{
+  */
+/* Initialization and de-initialization functions *******************************/
+HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);
+void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
+void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width,  uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
+void              HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef  HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef  HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef  HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef  HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef  HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
+
+/* Peripheral State functions ***************************************************/
+HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
+uint32_t               HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Types DMA2D Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private defines -------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Defines DMA2D Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Variables DMA2D Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Constants DMA2D Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Macros DMA2D Private Macros
+  * @{
+  */
+#define IS_DMA2D_LAYER(LAYER)                 ((LAYER) <= MAX_DMA2D_LAYER)
+#define IS_DMA2D_MODE(MODE)                   (((MODE) == DMA2D_M2M)       || ((MODE) == DMA2D_M2M_PFC) || \
+                                               ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
+#define IS_DMA2D_CMODE(MODE_ARGB)             (((MODE_ARGB) == DMA2D_ARGB8888) || ((MODE_ARGB) == DMA2D_RGB888)   || \
+                                               ((MODE_ARGB) == DMA2D_RGB565)   || ((MODE_ARGB) == DMA2D_ARGB1555) || \
+                                               ((MODE_ARGB) == DMA2D_ARGB4444))
+#define IS_DMA2D_COLOR(COLOR)                 ((COLOR) <= COLOR_VALUE)
+#define IS_DMA2D_LINE(LINE)                   ((LINE) <= DMA2D_LINE)
+#define IS_DMA2D_PIXEL(PIXEL)                 ((PIXEL) <= DMA2D_PIXEL)
+#define IS_DMA2D_OFFSET(OOFFSET)              ((OOFFSET) <= DMA2D_OFFSET)
+#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM)   (((INPUT_CM) == CM_ARGB8888) || ((INPUT_CM) == CM_RGB888)   || \
+                                               ((INPUT_CM) == CM_RGB565)   || ((INPUT_CM) == CM_ARGB1555) || \
+                                               ((INPUT_CM) == CM_ARGB4444) || ((INPUT_CM) == CM_L8)       || \
+                                               ((INPUT_CM) == CM_AL44)     || ((INPUT_CM) == CM_AL88)     || \
+                                               ((INPUT_CM) == CM_L4)       || ((INPUT_CM) == CM_A8)       || \
+                                               ((INPUT_CM) == CM_A4))
+#define IS_DMA2D_ALPHA_MODE(AlphaMode)        (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
+                                               ((AlphaMode) == DMA2D_REPLACE_ALPHA)  || \
+                                               ((AlphaMode) == DMA2D_COMBINE_ALPHA))
+#define IS_DMA2D_CLUT_CM(CLUT_CM)             (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
+#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE)         ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
+#define IS_DMA2D_LineWatermark(LineWatermark) ((LineWatermark) <= LINE_WATERMARK)
+/**
+  * @}
+  */
+
+/* Private functions prototypes ---------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Functions_Prototypes DMA2D Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Functions DMA2D Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F427xx || STM32F437xx  || STM32F429xx || STM32F439xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA2D_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h
new file mode 100644
index 0000000..62ccbf0
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h
@@ -0,0 +1,123 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dma_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of DMA HAL extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA_EX_H
+#define __STM32F4xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DMAEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
+  * @brief DMAEx Exported types
+  * @{
+  */
+
+/**
+  * @brief  HAL DMA Memory definition
+  */
+typedef enum
+{
+  MEMORY0      = 0x00,    /*!< Memory 0     */
+  MEMORY1      = 0x01,    /*!< Memory 1     */
+
+}HAL_DMA_MemoryTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
+  * @brief   DMAEx Exported functions
+  * @{
+  */
+
+/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
+  * @brief   Extended features functions
+  * @{
+  */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
+
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
+  * @brief DMAEx Private functions
+  * @{
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DMA_EX_H*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h
new file mode 100644
index 0000000..17678fd
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h
@@ -0,0 +1,2217 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_eth.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of ETH HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_ETH_H
+#define __STM32F4xx_HAL_ETH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ETH
+  * @{
+  */
+
+/** @addtogroup ETH_Private_Macros
+  * @{
+  */
+#define IS_ETH_PHY_ADDRESS(ADDRESS) ((ADDRESS) <= 0x20)
+#define IS_ETH_AUTONEGOTIATION(CMD) (((CMD) == ETH_AUTONEGOTIATION_ENABLE) || \
+                                     ((CMD) == ETH_AUTONEGOTIATION_DISABLE))
+#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \
+                             ((SPEED) == ETH_SPEED_100M))
+#define IS_ETH_DUPLEX_MODE(MODE)  (((MODE) == ETH_MODE_FULLDUPLEX) || \
+                                  ((MODE) == ETH_MODE_HALFDUPLEX))
+#define IS_ETH_RX_MODE(MODE)    (((MODE) == ETH_RXPOLLING_MODE) || \
+                                 ((MODE) == ETH_RXINTERRUPT_MODE))
+#define IS_ETH_CHECKSUM_MODE(MODE)    (((MODE) == ETH_CHECKSUM_BY_HARDWARE) || \
+                                      ((MODE) == ETH_CHECKSUM_BY_SOFTWARE))
+#define IS_ETH_MEDIA_INTERFACE(MODE)         (((MODE) == ETH_MEDIA_INTERFACE_MII) || \
+                                              ((MODE) == ETH_MEDIA_INTERFACE_RMII))
+#define IS_ETH_WATCHDOG(CMD) (((CMD) == ETH_WATCHDOG_ENABLE) || \
+                              ((CMD) == ETH_WATCHDOG_DISABLE))
+#define IS_ETH_JABBER(CMD) (((CMD) == ETH_JABBER_ENABLE) || \
+                            ((CMD) == ETH_JABBER_DISABLE))
+#define IS_ETH_INTER_FRAME_GAP(GAP) (((GAP) == ETH_INTERFRAMEGAP_96BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_88BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_80BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_72BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_64BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_56BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_48BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_40BIT))
+#define IS_ETH_CARRIER_SENSE(CMD) (((CMD) == ETH_CARRIERSENCE_ENABLE) || \
+                                   ((CMD) == ETH_CARRIERSENCE_DISABLE))
+#define IS_ETH_RECEIVE_OWN(CMD) (((CMD) == ETH_RECEIVEOWN_ENABLE) || \
+                                 ((CMD) == ETH_RECEIVEOWN_DISABLE))
+#define IS_ETH_LOOPBACK_MODE(CMD) (((CMD) == ETH_LOOPBACKMODE_ENABLE) || \
+                                   ((CMD) == ETH_LOOPBACKMODE_DISABLE))
+#define IS_ETH_CHECKSUM_OFFLOAD(CMD) (((CMD) == ETH_CHECKSUMOFFLAOD_ENABLE) || \
+                                      ((CMD) == ETH_CHECKSUMOFFLAOD_DISABLE))
+#define IS_ETH_RETRY_TRANSMISSION(CMD) (((CMD) == ETH_RETRYTRANSMISSION_ENABLE) || \
+                                        ((CMD) == ETH_RETRYTRANSMISSION_DISABLE))
+#define IS_ETH_AUTOMATIC_PADCRC_STRIP(CMD) (((CMD) == ETH_AUTOMATICPADCRCSTRIP_ENABLE) || \
+                                            ((CMD) == ETH_AUTOMATICPADCRCSTRIP_DISABLE))
+#define IS_ETH_BACKOFF_LIMIT(LIMIT) (((LIMIT) == ETH_BACKOFFLIMIT_10) || \
+                                     ((LIMIT) == ETH_BACKOFFLIMIT_8) || \
+                                     ((LIMIT) == ETH_BACKOFFLIMIT_4) || \
+                                     ((LIMIT) == ETH_BACKOFFLIMIT_1))
+#define IS_ETH_DEFERRAL_CHECK(CMD) (((CMD) == ETH_DEFFERRALCHECK_ENABLE) || \
+                                    ((CMD) == ETH_DEFFERRALCHECK_DISABLE))
+#define IS_ETH_RECEIVE_ALL(CMD) (((CMD) == ETH_RECEIVEALL_ENABLE) || \
+                                 ((CMD) == ETH_RECEIVEAll_DISABLE))
+#define IS_ETH_SOURCE_ADDR_FILTER(CMD) (((CMD) == ETH_SOURCEADDRFILTER_NORMAL_ENABLE) || \
+                                        ((CMD) == ETH_SOURCEADDRFILTER_INVERSE_ENABLE) || \
+                                        ((CMD) == ETH_SOURCEADDRFILTER_DISABLE))
+#define IS_ETH_CONTROL_FRAMES(PASS) (((PASS) == ETH_PASSCONTROLFRAMES_BLOCKALL) || \
+                                     ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDALL) || \
+                                     ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER))
+#define IS_ETH_BROADCAST_FRAMES_RECEPTION(CMD) (((CMD) == ETH_BROADCASTFRAMESRECEPTION_ENABLE) || \
+                                                ((CMD) == ETH_BROADCASTFRAMESRECEPTION_DISABLE))
+#define IS_ETH_DESTINATION_ADDR_FILTER(FILTER) (((FILTER) == ETH_DESTINATIONADDRFILTER_NORMAL) || \
+                                                ((FILTER) == ETH_DESTINATIONADDRFILTER_INVERSE))
+#define IS_ETH_PROMISCUOUS_MODE(CMD) (((CMD) == ETH_PROMISCUOUS_MODE_ENABLE) || \
+                                      ((CMD) == ETH_PROMISCUOUS_MODE_DISABLE))
+#define IS_ETH_MULTICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+                                                ((FILTER) == ETH_MULTICASTFRAMESFILTER_HASHTABLE) || \
+                                                ((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECT) || \
+                                                ((FILTER) == ETH_MULTICASTFRAMESFILTER_NONE))
+#define IS_ETH_UNICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+                                              ((FILTER) == ETH_UNICASTFRAMESFILTER_HASHTABLE) || \
+                                              ((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECT))
+#define IS_ETH_PAUSE_TIME(TIME) ((TIME) <= 0xFFFF)
+#define IS_ETH_ZEROQUANTA_PAUSE(CMD)   (((CMD) == ETH_ZEROQUANTAPAUSE_ENABLE) || \
+                                        ((CMD) == ETH_ZEROQUANTAPAUSE_DISABLE))
+#define IS_ETH_PAUSE_LOW_THRESHOLD(THRESHOLD) (((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS4) || \
+                                               ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS28) || \
+                                               ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS144) || \
+                                               ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS256))
+#define IS_ETH_UNICAST_PAUSE_FRAME_DETECT(CMD) (((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_ENABLE) || \
+                                                ((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_DISABLE))
+#define IS_ETH_RECEIVE_FLOWCONTROL(CMD) (((CMD) == ETH_RECEIVEFLOWCONTROL_ENABLE) || \
+                                         ((CMD) == ETH_RECEIVEFLOWCONTROL_DISABLE))
+#define IS_ETH_TRANSMIT_FLOWCONTROL(CMD) (((CMD) == ETH_TRANSMITFLOWCONTROL_ENABLE) || \
+                                          ((CMD) == ETH_TRANSMITFLOWCONTROL_DISABLE))
+#define IS_ETH_VLAN_TAG_COMPARISON(COMPARISON) (((COMPARISON) == ETH_VLANTAGCOMPARISON_12BIT) || \
+                                                ((COMPARISON) == ETH_VLANTAGCOMPARISON_16BIT))
+#define IS_ETH_VLAN_TAG_IDENTIFIER(IDENTIFIER) ((IDENTIFIER) <= 0xFFFF)
+#define IS_ETH_MAC_ADDRESS0123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS0) || \
+                                         ((ADDRESS) == ETH_MAC_ADDRESS1) || \
+                                         ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+                                         ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS1) || \
+                                        ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+                                        ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS_FILTER(FILTER) (((FILTER) == ETH_MAC_ADDRESSFILTER_SA) || \
+                                           ((FILTER) == ETH_MAC_ADDRESSFILTER_DA))
+#define IS_ETH_MAC_ADDRESS_MASK(MASK) (((MASK) == ETH_MAC_ADDRESSMASK_BYTE6) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE5) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE4) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE3) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE2) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE1))
+#define IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(CMD) (((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE) || \
+                                               ((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE))
+#define IS_ETH_RECEIVE_STORE_FORWARD(CMD) (((CMD) == ETH_RECEIVESTOREFORWARD_ENABLE) || \
+                                           ((CMD) == ETH_RECEIVESTOREFORWARD_DISABLE))
+#define IS_ETH_FLUSH_RECEIVE_FRAME(CMD) (((CMD) == ETH_FLUSHRECEIVEDFRAME_ENABLE) || \
+                                         ((CMD) == ETH_FLUSHRECEIVEDFRAME_DISABLE))
+#define IS_ETH_TRANSMIT_STORE_FORWARD(CMD) (((CMD) == ETH_TRANSMITSTOREFORWARD_ENABLE) || \
+                                            ((CMD) == ETH_TRANSMITSTOREFORWARD_DISABLE))
+#define IS_ETH_TRANSMIT_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_64BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_128BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_192BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_256BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_40BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_32BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_24BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_16BYTES))
+#define IS_ETH_FORWARD_ERROR_FRAMES(CMD) (((CMD) == ETH_FORWARDERRORFRAMES_ENABLE) || \
+                                          ((CMD) == ETH_FORWARDERRORFRAMES_DISABLE))
+#define IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(CMD) (((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE) || \
+                                                    ((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE))
+#define IS_ETH_RECEIVE_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES) || \
+                                                     ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES) || \
+                                                     ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES) || \
+                                                     ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES))
+#define IS_ETH_SECOND_FRAME_OPERATE(CMD) (((CMD) == ETH_SECONDFRAMEOPERARTE_ENABLE) || \
+                                          ((CMD) == ETH_SECONDFRAMEOPERARTE_DISABLE))
+#define IS_ETH_ADDRESS_ALIGNED_BEATS(CMD) (((CMD) == ETH_ADDRESSALIGNEDBEATS_ENABLE) || \
+                                           ((CMD) == ETH_ADDRESSALIGNEDBEATS_DISABLE))
+#define IS_ETH_FIXED_BURST(CMD) (((CMD) == ETH_FIXEDBURST_ENABLE) || \
+                                 ((CMD) == ETH_FIXEDBURST_DISABLE))
+#define IS_ETH_RXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_RXDMABURSTLENGTH_1BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_2BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_8BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_16BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_32BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_4BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_8BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_16BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_32BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_64BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_TXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_TXDMABURSTLENGTH_1BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_2BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_8BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_16BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_32BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_4BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_8BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_16BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_32BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_64BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_DMA_DESC_SKIP_LENGTH(LENGTH) ((LENGTH) <= 0x1F)
+#define IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(RATIO) (((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1) || \
+                                                       ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1) || \
+                                                       ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1) || \
+                                                       ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1) || \
+                                                       ((RATIO) == ETH_DMAARBITRATION_RXPRIORTX))
+#define IS_ETH_DMATXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMATXDESC_OWN) || \
+                                         ((FLAG) == ETH_DMATXDESC_IC) || \
+                                         ((FLAG) == ETH_DMATXDESC_LS) || \
+                                         ((FLAG) == ETH_DMATXDESC_FS) || \
+                                         ((FLAG) == ETH_DMATXDESC_DC) || \
+                                         ((FLAG) == ETH_DMATXDESC_DP) || \
+                                         ((FLAG) == ETH_DMATXDESC_TTSE) || \
+                                         ((FLAG) == ETH_DMATXDESC_TER) || \
+                                         ((FLAG) == ETH_DMATXDESC_TCH) || \
+                                         ((FLAG) == ETH_DMATXDESC_TTSS) || \
+                                         ((FLAG) == ETH_DMATXDESC_IHE) || \
+                                         ((FLAG) == ETH_DMATXDESC_ES) || \
+                                         ((FLAG) == ETH_DMATXDESC_JT) || \
+                                         ((FLAG) == ETH_DMATXDESC_FF) || \
+                                         ((FLAG) == ETH_DMATXDESC_PCE) || \
+                                         ((FLAG) == ETH_DMATXDESC_LCA) || \
+                                         ((FLAG) == ETH_DMATXDESC_NC) || \
+                                         ((FLAG) == ETH_DMATXDESC_LCO) || \
+                                         ((FLAG) == ETH_DMATXDESC_EC) || \
+                                         ((FLAG) == ETH_DMATXDESC_VF) || \
+                                         ((FLAG) == ETH_DMATXDESC_CC) || \
+                                         ((FLAG) == ETH_DMATXDESC_ED) || \
+                                         ((FLAG) == ETH_DMATXDESC_UF) || \
+                                         ((FLAG) == ETH_DMATXDESC_DB))
+#define IS_ETH_DMA_TXDESC_SEGMENT(SEGMENT) (((SEGMENT) == ETH_DMATXDESC_LASTSEGMENTS) || \
+                                            ((SEGMENT) == ETH_DMATXDESC_FIRSTSEGMENT))
+#define IS_ETH_DMA_TXDESC_CHECKSUM(CHECKSUM) (((CHECKSUM) == ETH_DMATXDESC_CHECKSUMBYPASS) || \
+                                              ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMIPV4HEADER) || \
+                                              ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT) || \
+                                              ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL))
+#define IS_ETH_DMATXDESC_BUFFER_SIZE(SIZE) ((SIZE) <= 0x1FFF)
+#define IS_ETH_DMARXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMARXDESC_OWN) || \
+                                         ((FLAG) == ETH_DMARXDESC_AFM) || \
+                                         ((FLAG) == ETH_DMARXDESC_ES) || \
+                                         ((FLAG) == ETH_DMARXDESC_DE) || \
+                                         ((FLAG) == ETH_DMARXDESC_SAF) || \
+                                         ((FLAG) == ETH_DMARXDESC_LE) || \
+                                         ((FLAG) == ETH_DMARXDESC_OE) || \
+                                         ((FLAG) == ETH_DMARXDESC_VLAN) || \
+                                         ((FLAG) == ETH_DMARXDESC_FS) || \
+                                         ((FLAG) == ETH_DMARXDESC_LS) || \
+                                         ((FLAG) == ETH_DMARXDESC_IPV4HCE) || \
+                                         ((FLAG) == ETH_DMARXDESC_LC) || \
+                                         ((FLAG) == ETH_DMARXDESC_FT) || \
+                                         ((FLAG) == ETH_DMARXDESC_RWT) || \
+                                         ((FLAG) == ETH_DMARXDESC_RE) || \
+                                         ((FLAG) == ETH_DMARXDESC_DBE) || \
+                                         ((FLAG) == ETH_DMARXDESC_CE) || \
+                                         ((FLAG) == ETH_DMARXDESC_MAMPCE))
+#define IS_ETH_DMA_RXDESC_BUFFER(BUFFER) (((BUFFER) == ETH_DMARXDESC_BUFFER1) || \
+                                          ((BUFFER) == ETH_DMARXDESC_BUFFER2))
+#define IS_ETH_PMT_GET_FLAG(FLAG) (((FLAG) == ETH_PMT_FLAG_WUFR) || \
+                                   ((FLAG) == ETH_PMT_FLAG_MPR))
+#define IS_ETH_DMA_FLAG(FLAG) ((((FLAG) & (uint32_t)0xC7FE1800) == 0x00) && ((FLAG) != 0x00))
+#define IS_ETH_DMA_GET_FLAG(FLAG) (((FLAG) == ETH_DMA_FLAG_TST) || ((FLAG) == ETH_DMA_FLAG_PMT) || \
+                                   ((FLAG) == ETH_DMA_FLAG_MMC) || ((FLAG) == ETH_DMA_FLAG_DATATRANSFERERROR) || \
+                                   ((FLAG) == ETH_DMA_FLAG_READWRITEERROR) || ((FLAG) == ETH_DMA_FLAG_ACCESSERROR) || \
+                                   ((FLAG) == ETH_DMA_FLAG_NIS) || ((FLAG) == ETH_DMA_FLAG_AIS) || \
+                                   ((FLAG) == ETH_DMA_FLAG_ER) || ((FLAG) == ETH_DMA_FLAG_FBE) || \
+                                   ((FLAG) == ETH_DMA_FLAG_ET) || ((FLAG) == ETH_DMA_FLAG_RWT) || \
+                                   ((FLAG) == ETH_DMA_FLAG_RPS) || ((FLAG) == ETH_DMA_FLAG_RBU) || \
+                                   ((FLAG) == ETH_DMA_FLAG_R) || ((FLAG) == ETH_DMA_FLAG_TU) || \
+                                   ((FLAG) == ETH_DMA_FLAG_RO) || ((FLAG) == ETH_DMA_FLAG_TJT) || \
+                                   ((FLAG) == ETH_DMA_FLAG_TBU) || ((FLAG) == ETH_DMA_FLAG_TPS) || \
+                                   ((FLAG) == ETH_DMA_FLAG_T))
+#define IS_ETH_MAC_IT(IT) ((((IT) & (uint32_t)0xFFFFFDF1) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_MAC_GET_IT(IT) (((IT) == ETH_MAC_IT_TST) || ((IT) == ETH_MAC_IT_MMCT) || \
+                               ((IT) == ETH_MAC_IT_MMCR) || ((IT) == ETH_MAC_IT_MMC) || \
+                               ((IT) == ETH_MAC_IT_PMT))
+#define IS_ETH_MAC_GET_FLAG(FLAG) (((FLAG) == ETH_MAC_FLAG_TST) || ((FLAG) == ETH_MAC_FLAG_MMCT) || \
+                                   ((FLAG) == ETH_MAC_FLAG_MMCR) || ((FLAG) == ETH_MAC_FLAG_MMC) || \
+                                   ((FLAG) == ETH_MAC_FLAG_PMT))
+#define IS_ETH_DMA_IT(IT) ((((IT) & (uint32_t)0xC7FE1800) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_DMA_GET_IT(IT) (((IT) == ETH_DMA_IT_TST) || ((IT) == ETH_DMA_IT_PMT) || \
+                               ((IT) == ETH_DMA_IT_MMC) || ((IT) == ETH_DMA_IT_NIS) || \
+                               ((IT) == ETH_DMA_IT_AIS) || ((IT) == ETH_DMA_IT_ER) || \
+                               ((IT) == ETH_DMA_IT_FBE) || ((IT) == ETH_DMA_IT_ET) || \
+                               ((IT) == ETH_DMA_IT_RWT) || ((IT) == ETH_DMA_IT_RPS) || \
+                               ((IT) == ETH_DMA_IT_RBU) || ((IT) == ETH_DMA_IT_R) || \
+                               ((IT) == ETH_DMA_IT_TU) || ((IT) == ETH_DMA_IT_RO) || \
+                               ((IT) == ETH_DMA_IT_TJT) || ((IT) == ETH_DMA_IT_TBU) || \
+                               ((IT) == ETH_DMA_IT_TPS) || ((IT) == ETH_DMA_IT_T))
+#define IS_ETH_DMA_GET_OVERFLOW(OVERFLOW) (((OVERFLOW) == ETH_DMA_OVERFLOW_RXFIFOCOUNTER) || \
+                                           ((OVERFLOW) == ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER))
+#define IS_ETH_MMC_IT(IT) (((((IT) & (uint32_t)0xFFDF3FFF) == 0x00) || (((IT) & (uint32_t)0xEFFDFF9F) == 0x00)) && \
+                           ((IT) != 0x00))
+#define IS_ETH_MMC_GET_IT(IT) (((IT) == ETH_MMC_IT_TGF) || ((IT) == ETH_MMC_IT_TGFMSC) || \
+                               ((IT) == ETH_MMC_IT_TGFSC) || ((IT) == ETH_MMC_IT_RGUF) || \
+                               ((IT) == ETH_MMC_IT_RFAE) || ((IT) == ETH_MMC_IT_RFCE))
+#define IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(CMD) (((CMD) == ETH_DMAENHANCEDDESCRIPTOR_ENABLE) || \
+                                                ((CMD) == ETH_DMAENHANCEDDESCRIPTOR_DISABLE))
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup ETH_Private_Defines
+  * @{
+  */
+/* Delay to wait when writing to some Ethernet registers */
+#define ETH_REG_WRITE_DELAY ((uint32_t)0x00000001)
+
+/* ETHERNET Errors */
+#define  ETH_SUCCESS            ((uint32_t)0)
+#define  ETH_ERROR              ((uint32_t)1)
+
+/* ETHERNET DMA Tx descriptors Collision Count Shift */
+#define  ETH_DMATXDESC_COLLISION_COUNTSHIFT         ((uint32_t)3)
+
+/* ETHERNET DMA Tx descriptors Buffer2 Size Shift */
+#define  ETH_DMATXDESC_BUFFER2_SIZESHIFT           ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Frame Length Shift */
+#define  ETH_DMARXDESC_FRAME_LENGTHSHIFT           ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Buffer2 Size Shift */
+#define  ETH_DMARXDESC_BUFFER2_SIZESHIFT           ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Frame length Shift */
+#define  ETH_DMARXDESC_FRAMELENGTHSHIFT            ((uint32_t)16)
+
+/* ETHERNET MAC address offsets */
+#define ETH_MAC_ADDR_HBASE    (uint32_t)(ETH_MAC_BASE + (uint32_t)0x40)  /* ETHERNET MAC address high offset */
+#define ETH_MAC_ADDR_LBASE    (uint32_t)(ETH_MAC_BASE + (uint32_t)0x44)  /* ETHERNET MAC address low offset */
+
+/* ETHERNET MACMIIAR register Mask */
+#define ETH_MACMIIAR_CR_MASK    ((uint32_t)0xFFFFFFE3)
+
+/* ETHERNET MACCR register Mask */
+#define ETH_MACCR_CLEAR_MASK    ((uint32_t)0xFF20810F)
+
+/* ETHERNET MACFCR register Mask */
+#define ETH_MACFCR_CLEAR_MASK   ((uint32_t)0x0000FF41)
+
+/* ETHERNET DMAOMR register Mask */
+#define ETH_DMAOMR_CLEAR_MASK   ((uint32_t)0xF8DE3F23)
+
+/* ETHERNET Remote Wake-up frame register length */
+#define ETH_WAKEUP_REGISTER_LENGTH      8
+
+/* ETHERNET Missed frames counter Shift */
+#define  ETH_DMA_RX_OVERFLOW_MISSEDFRAMES_COUNTERSHIFT     17
+ /**
+  * @}
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Types ETH Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_ETH_STATE_RESET             = 0x00,    /*!< Peripheral not yet Initialized or disabled         */
+  HAL_ETH_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use           */
+  HAL_ETH_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing                     */
+  HAL_ETH_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing               */
+  HAL_ETH_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing                  */
+  HAL_ETH_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission and Reception process is ongoing */
+  HAL_ETH_STATE_BUSY_WR           = 0x42,    /*!< Write process is ongoing                           */
+  HAL_ETH_STATE_BUSY_RD           = 0x82,    /*!< Read process is ongoing                            */
+  HAL_ETH_STATE_TIMEOUT           = 0x03,    /*!< Timeout state                                      */
+  HAL_ETH_STATE_ERROR             = 0x04     /*!< Reception process is ongoing                       */
+}HAL_ETH_StateTypeDef;
+
+/**
+  * @brief  ETH Init Structure definition
+  */
+
+typedef struct
+{
+  uint32_t             AutoNegotiation;           /*!< Selects or not the AutoNegotiation mode for the external PHY
+                                                           The AutoNegotiation allows an automatic setting of the Speed (10/100Mbps)
+                                                           and the mode (half/full-duplex).
+                                                           This parameter can be a value of @ref ETH_AutoNegotiation */
+
+  uint32_t             Speed;                     /*!< Sets the Ethernet speed: 10/100 Mbps.
+                                                           This parameter can be a value of @ref ETH_Speed */
+
+  uint32_t             DuplexMode;                /*!< Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode
+                                                           This parameter can be a value of @ref ETH_Duplex_Mode */
+
+  uint16_t             PhyAddress;                /*!< Ethernet PHY address.
+                                                           This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+  uint8_t             *MACAddr;                   /*!< MAC Address of used Hardware: must be pointer on an array of 6 bytes */
+
+  uint32_t             RxMode;                    /*!< Selects the Ethernet Rx mode: Polling mode, Interrupt mode.
+                                                           This parameter can be a value of @ref ETH_Rx_Mode */
+
+  uint32_t             ChecksumMode;              /*!< Selects if the checksum is check by hardware or by software.
+                                                         This parameter can be a value of @ref ETH_Checksum_Mode */
+
+  uint32_t             MediaInterface    ;               /*!< Selects the media-independent interface or the reduced media-independent interface.
+                                                         This parameter can be a value of @ref ETH_Media_Interface */
+
+} ETH_InitTypeDef;
+
+
+ /**
+  * @brief  ETH MAC Configuration Structure definition
+  */
+
+typedef struct
+{
+  uint32_t             Watchdog;                  /*!< Selects or not the Watchdog timer
+                                                           When enabled, the MAC allows no more then 2048 bytes to be received.
+                                                           When disabled, the MAC can receive up to 16384 bytes.
+                                                           This parameter can be a value of @ref ETH_Watchdog */
+
+  uint32_t             Jabber;                    /*!< Selects or not Jabber timer
+                                                           When enabled, the MAC allows no more then 2048 bytes to be sent.
+                                                           When disabled, the MAC can send up to 16384 bytes.
+                                                           This parameter can be a value of @ref ETH_Jabber */
+
+  uint32_t             InterFrameGap;             /*!< Selects the minimum IFG between frames during transmission.
+                                                           This parameter can be a value of @ref ETH_Inter_Frame_Gap */
+
+  uint32_t             CarrierSense;              /*!< Selects or not the Carrier Sense.
+                                                           This parameter can be a value of @ref ETH_Carrier_Sense */
+
+  uint32_t             ReceiveOwn;                /*!< Selects or not the ReceiveOwn,
+                                                           ReceiveOwn allows the reception of frames when the TX_EN signal is asserted
+                                                           in Half-Duplex mode.
+                                                           This parameter can be a value of @ref ETH_Receive_Own */
+
+  uint32_t             LoopbackMode;              /*!< Selects or not the internal MAC MII Loopback mode.
+                                                           This parameter can be a value of @ref ETH_Loop_Back_Mode */
+
+  uint32_t             ChecksumOffload;           /*!< Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers.
+                                                           This parameter can be a value of @ref ETH_Checksum_Offload */
+
+  uint32_t             RetryTransmission;         /*!< Selects or not the MAC attempt retries transmission, based on the settings of BL,
+                                                           when a collision occurs (Half-Duplex mode).
+                                                           This parameter can be a value of @ref ETH_Retry_Transmission */
+
+  uint32_t             AutomaticPadCRCStrip;      /*!< Selects or not the Automatic MAC Pad/CRC Stripping.
+                                                           This parameter can be a value of @ref ETH_Automatic_Pad_CRC_Strip */
+
+  uint32_t             BackOffLimit;              /*!< Selects the BackOff limit value.
+                                                           This parameter can be a value of @ref ETH_Back_Off_Limit */
+
+  uint32_t             DeferralCheck;             /*!< Selects or not the deferral check function (Half-Duplex mode).
+                                                           This parameter can be a value of @ref ETH_Deferral_Check */
+
+  uint32_t             ReceiveAll;                /*!< Selects or not all frames reception by the MAC (No filtering).
+                                                           This parameter can be a value of @ref ETH_Receive_All */
+
+  uint32_t             SourceAddrFilter;          /*!< Selects the Source Address Filter mode.
+                                                           This parameter can be a value of @ref ETH_Source_Addr_Filter */
+
+  uint32_t             PassControlFrames;         /*!< Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames)
+                                                           This parameter can be a value of @ref ETH_Pass_Control_Frames */
+
+  uint32_t             BroadcastFramesReception;  /*!< Selects or not the reception of Broadcast Frames.
+                                                           This parameter can be a value of @ref ETH_Broadcast_Frames_Reception */
+
+  uint32_t             DestinationAddrFilter;     /*!< Sets the destination filter mode for both unicast and multicast frames.
+                                                           This parameter can be a value of @ref ETH_Destination_Addr_Filter */
+
+  uint32_t             PromiscuousMode;           /*!< Selects or not the Promiscuous Mode
+                                                           This parameter can be a value of @ref ETH_Promiscuous_Mode */
+
+  uint32_t             MulticastFramesFilter;     /*!< Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+                                                           This parameter can be a value of @ref ETH_Multicast_Frames_Filter */
+
+  uint32_t             UnicastFramesFilter;       /*!< Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+                                                           This parameter can be a value of @ref ETH_Unicast_Frames_Filter */
+
+  uint32_t             HashTableHigh;             /*!< This field holds the higher 32 bits of Hash table.
+                                                           This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
+
+  uint32_t             HashTableLow;              /*!< This field holds the lower 32 bits of Hash table.
+                                                           This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF  */
+
+  uint32_t             PauseTime;                 /*!< This field holds the value to be used in the Pause Time field in the transmit control frame.
+                                                           This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFF */
+
+  uint32_t             ZeroQuantaPause;           /*!< Selects or not the automatic generation of Zero-Quanta Pause Control frames.
+                                                           This parameter can be a value of @ref ETH_Zero_Quanta_Pause */
+
+  uint32_t             PauseLowThreshold;         /*!< This field configures the threshold of the PAUSE to be checked for
+                                                           automatic retransmission of PAUSE Frame.
+                                                           This parameter can be a value of @ref ETH_Pause_Low_Threshold */
+
+  uint32_t             UnicastPauseFrameDetect;   /*!< Selects or not the MAC detection of the Pause frames (with MAC Address0
+                                                           unicast address and unique multicast address).
+                                                           This parameter can be a value of @ref ETH_Unicast_Pause_Frame_Detect */
+
+  uint32_t             ReceiveFlowControl;        /*!< Enables or disables the MAC to decode the received Pause frame and
+                                                           disable its transmitter for a specified time (Pause Time)
+                                                           This parameter can be a value of @ref ETH_Receive_Flow_Control */
+
+  uint32_t             TransmitFlowControl;       /*!< Enables or disables the MAC to transmit Pause frames (Full-Duplex mode)
+                                                           or the MAC back-pressure operation (Half-Duplex mode)
+                                                           This parameter can be a value of @ref ETH_Transmit_Flow_Control */
+
+  uint32_t             VLANTagComparison;         /*!< Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for
+                                                           comparison and filtering.
+                                                           This parameter can be a value of @ref ETH_VLAN_Tag_Comparison */
+
+  uint32_t             VLANTagIdentifier;         /*!< Holds the VLAN tag identifier for receive frames */
+
+} ETH_MACInitTypeDef;
+
+
+/**
+  * @brief  ETH DMA Configuration Structure definition
+  */
+
+typedef struct
+{
+ uint32_t              DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames.
+                                                             This parameter can be a value of @ref ETH_Drop_TCP_IP_Checksum_Error_Frame */
+
+  uint32_t             ReceiveStoreForward;         /*!< Enables or disables the Receive store and forward mode.
+                                                             This parameter can be a value of @ref ETH_Receive_Store_Forward */
+
+  uint32_t             FlushReceivedFrame;          /*!< Enables or disables the flushing of received frames.
+                                                             This parameter can be a value of @ref ETH_Flush_Received_Frame */
+
+  uint32_t             TransmitStoreForward;        /*!< Enables or disables Transmit store and forward mode.
+                                                             This parameter can be a value of @ref ETH_Transmit_Store_Forward */
+
+  uint32_t             TransmitThresholdControl;    /*!< Selects or not the Transmit Threshold Control.
+                                                             This parameter can be a value of @ref ETH_Transmit_Threshold_Control */
+
+  uint32_t             ForwardErrorFrames;          /*!< Selects or not the forward to the DMA of erroneous frames.
+                                                             This parameter can be a value of @ref ETH_Forward_Error_Frames */
+
+  uint32_t             ForwardUndersizedGoodFrames; /*!< Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error
+                                                             and length less than 64 bytes) including pad-bytes and CRC)
+                                                             This parameter can be a value of @ref ETH_Forward_Undersized_Good_Frames */
+
+  uint32_t             ReceiveThresholdControl;     /*!< Selects the threshold level of the Receive FIFO.
+                                                             This parameter can be a value of @ref ETH_Receive_Threshold_Control */
+
+  uint32_t             SecondFrameOperate;          /*!< Selects or not the Operate on second frame mode, which allows the DMA to process a second
+                                                             frame of Transmit data even before obtaining the status for the first frame.
+                                                             This parameter can be a value of @ref ETH_Second_Frame_Operate */
+
+  uint32_t             AddressAlignedBeats;         /*!< Enables or disables the Address Aligned Beats.
+                                                             This parameter can be a value of @ref ETH_Address_Aligned_Beats */
+
+  uint32_t             FixedBurst;                  /*!< Enables or disables the AHB Master interface fixed burst transfers.
+                                                             This parameter can be a value of @ref ETH_Fixed_Burst */
+
+  uint32_t             RxDMABurstLength;            /*!< Indicates the maximum number of beats to be transferred in one Rx DMA transaction.
+                                                             This parameter can be a value of @ref ETH_Rx_DMA_Burst_Length */
+
+  uint32_t             TxDMABurstLength;            /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction.
+                                                             This parameter can be a value of @ref ETH_Tx_DMA_Burst_Length */
+
+  uint32_t             EnhancedDescriptorFormat;    /*!< Enables the enhanced descriptor format.
+                                                             This parameter can be a value of @ref ETH_DMA_Enhanced_descriptor_format */
+
+  uint32_t             DescriptorSkipLength;        /*!< Specifies the number of word to skip between two unchained descriptors (Ring mode)
+                                                             This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+  uint32_t             DMAArbitration;              /*!< Selects the DMA Tx/Rx arbitration.
+                                                             This parameter can be a value of @ref ETH_DMA_Arbitration */
+} ETH_DMAInitTypeDef;
+
+
+/**
+  * @brief  ETH DMA Descriptors data structure definition
+  */
+
+typedef struct
+{
+  __IO uint32_t   Status;           /*!< Status */
+
+  uint32_t   ControlBufferSize;     /*!< Control and Buffer1, Buffer2 lengths */
+
+  uint32_t   Buffer1Addr;           /*!< Buffer1 address pointer */
+
+  uint32_t   Buffer2NextDescAddr;   /*!< Buffer2 or next descriptor address pointer */
+
+  /*!< Enhanced ETHERNET DMA PTP Descriptors */
+  uint32_t   ExtendedStatus;        /*!< Extended status for PTP receive descriptor */
+
+  uint32_t   Reserved1;             /*!< Reserved */
+
+  uint32_t   TimeStampLow;          /*!< Time Stamp Low value for transmit and receive */
+
+  uint32_t   TimeStampHigh;         /*!< Time Stamp High value for transmit and receive */
+
+} ETH_DMADescTypeDef;
+
+
+/**
+  * @brief  Received Frame Informations structure definition
+  */
+typedef struct
+{
+  ETH_DMADescTypeDef *FSRxDesc;          /*!< First Segment Rx Desc */
+
+  ETH_DMADescTypeDef *LSRxDesc;          /*!< Last Segment Rx Desc */
+
+  uint32_t  SegCount;                    /*!< Segment count */
+
+  uint32_t length;                       /*!< Frame length */
+
+  uint32_t buffer;                       /*!< Frame buffer */
+
+} ETH_DMARxFrameInfos;
+
+
+/**
+  * @brief  ETH Handle Structure definition
+  */
+
+typedef struct
+{
+  ETH_TypeDef                *Instance;     /*!< Register base address       */
+
+  ETH_InitTypeDef            Init;          /*!< Ethernet Init Configuration */
+
+  uint32_t                   LinkStatus;    /*!< Ethernet link status        */
+
+  ETH_DMADescTypeDef         *RxDesc;       /*!< Rx descriptor to Get        */
+
+  ETH_DMADescTypeDef         *TxDesc;       /*!< Tx descriptor to Set        */
+
+  ETH_DMARxFrameInfos        RxFrameInfos;  /*!< last Rx frame infos         */
+
+  __IO HAL_ETH_StateTypeDef  State;         /*!< ETH communication state     */
+
+  HAL_LockTypeDef            Lock;          /*!< ETH Lock                    */
+
+} ETH_HandleTypeDef;
+
+ /**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ETH_Exported_Constants ETH Exported Constants
+  * @{
+  */
+
+/** @defgroup ETH_Buffers_setting ETH Buffers setting
+  * @{
+  */
+#define ETH_MAX_PACKET_SIZE    ((uint32_t)1524)    /*!< ETH_HEADER + ETH_EXTRA + ETH_VLAN_TAG + ETH_MAX_ETH_PAYLOAD + ETH_CRC */
+#define ETH_HEADER               ((uint32_t)14)    /*!< 6 byte Dest addr, 6 byte Src addr, 2 byte length/type */
+#define ETH_CRC                   ((uint32_t)4)    /*!< Ethernet CRC */
+#define ETH_EXTRA                 ((uint32_t)2)    /*!< Extra bytes in some cases */
+#define ETH_VLAN_TAG                  ((uint32_t)4)    /*!< optional 802.1q VLAN Tag */
+#define ETH_MIN_ETH_PAYLOAD          ((uint32_t)46)    /*!< Minimum Ethernet payload size */
+#define ETH_MAX_ETH_PAYLOAD        ((uint32_t)1500)    /*!< Maximum Ethernet payload size */
+#define ETH_JUMBO_FRAME_PAYLOAD    ((uint32_t)9000)    /*!< Jumbo frame payload size */
+
+ /* Ethernet driver receive buffers are organized in a chained linked-list, when
+    an ethernet packet is received, the Rx-DMA will transfer the packet from RxFIFO
+    to the driver receive buffers memory.
+
+    Depending on the size of the received ethernet packet and the size of
+    each ethernet driver receive buffer, the received packet can take one or more
+    ethernet driver receive buffer.
+
+    In below are defined the size of one ethernet driver receive buffer ETH_RX_BUF_SIZE
+    and the total count of the driver receive buffers ETH_RXBUFNB.
+
+    The configured value for ETH_RX_BUF_SIZE and ETH_RXBUFNB are only provided as
+    example, they can be reconfigured in the application layer to fit the application
+    needs */
+
+/* Here we configure each Ethernet driver receive buffer to fit the Max size Ethernet
+   packet */
+#ifndef ETH_RX_BUF_SIZE
+ #define ETH_RX_BUF_SIZE         ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 Ethernet driver receive buffers are used (in a chained linked list)*/
+#ifndef ETH_RXBUFNB
+ #define ETH_RXBUFNB             ((uint32_t)5     /*  5 Rx buffers of size ETH_RX_BUF_SIZE */
+#endif
+
+
+ /* Ethernet driver transmit buffers are organized in a chained linked-list, when
+    an ethernet packet is transmitted, Tx-DMA will transfer the packet from the
+    driver transmit buffers memory to the TxFIFO.
+
+    Depending on the size of the Ethernet packet to be transmitted and the size of
+    each ethernet driver transmit buffer, the packet to be transmitted can take
+    one or more ethernet driver transmit buffer.
+
+    In below are defined the size of one ethernet driver transmit buffer ETH_TX_BUF_SIZE
+    and the total count of the driver transmit buffers ETH_TXBUFNB.
+
+    The configured value for ETH_TX_BUF_SIZE and ETH_TXBUFNB are only provided as
+    example, they can be reconfigured in the application layer to fit the application
+    needs */
+
+/* Here we configure each Ethernet driver transmit buffer to fit the Max size Ethernet
+   packet */
+#ifndef ETH_TX_BUF_SIZE
+ #define ETH_TX_BUF_SIZE         ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 ethernet driver transmit buffers are used (in a chained linked list)*/
+#ifndef ETH_TXBUFNB
+ #define ETH_TXBUFNB             ((uint32_t)5      /* 5  Tx buffers of size ETH_TX_BUF_SIZE */
+#endif
+
+ /**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_TX_Descriptor ETH DMA TX Descriptor
+  * @{
+  */
+
+/*
+   DMA Tx Descriptor
+  -----------------------------------------------------------------------------------------------
+  TDES0 | OWN(31) | CTRL[30:26] | Reserved[25:24] | CTRL[23:20] | Reserved[19:17] | Status[16:0] |
+  -----------------------------------------------------------------------------------------------
+  TDES1 | Reserved[31:29] | Buffer2 ByteCount[28:16] | Reserved[15:13] | Buffer1 ByteCount[12:0] |
+  -----------------------------------------------------------------------------------------------
+  TDES2 |                         Buffer1 Address [31:0]                                         |
+  -----------------------------------------------------------------------------------------------
+  TDES3 |                   Buffer2 Address [31:0] / Next Descriptor Address [31:0]              |
+  -----------------------------------------------------------------------------------------------
+*/
+
+/**
+  * @brief  Bit definition of TDES0 register: DMA Tx descriptor status register
+  */
+#define ETH_DMATXDESC_OWN                     ((uint32_t)0x80000000)  /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMATXDESC_IC                      ((uint32_t)0x40000000)  /*!< Interrupt on Completion */
+#define ETH_DMATXDESC_LS                      ((uint32_t)0x20000000)  /*!< Last Segment */
+#define ETH_DMATXDESC_FS                      ((uint32_t)0x10000000)  /*!< First Segment */
+#define ETH_DMATXDESC_DC                      ((uint32_t)0x08000000)  /*!< Disable CRC */
+#define ETH_DMATXDESC_DP                      ((uint32_t)0x04000000)  /*!< Disable Padding */
+#define ETH_DMATXDESC_TTSE                    ((uint32_t)0x02000000)  /*!< Transmit Time Stamp Enable */
+#define ETH_DMATXDESC_CIC                     ((uint32_t)0x00C00000)  /*!< Checksum Insertion Control: 4 cases */
+#define ETH_DMATXDESC_CIC_BYPASS              ((uint32_t)0x00000000)  /*!< Do Nothing: Checksum Engine is bypassed */
+#define ETH_DMATXDESC_CIC_IPV4HEADER          ((uint32_t)0x00400000)  /*!< IPV4 header Checksum Insertion */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_SEGMENT  ((uint32_t)0x00800000)  /*!< TCP/UDP/ICMP Checksum Insertion calculated over segment only */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_FULL     ((uint32_t)0x00C00000)  /*!< TCP/UDP/ICMP Checksum Insertion fully calculated */
+#define ETH_DMATXDESC_TER                     ((uint32_t)0x00200000)  /*!< Transmit End of Ring */
+#define ETH_DMATXDESC_TCH                     ((uint32_t)0x00100000)  /*!< Second Address Chained */
+#define ETH_DMATXDESC_TTSS                    ((uint32_t)0x00020000)  /*!< Tx Time Stamp Status */
+#define ETH_DMATXDESC_IHE                     ((uint32_t)0x00010000)  /*!< IP Header Error */
+#define ETH_DMATXDESC_ES                      ((uint32_t)0x00008000)  /*!< Error summary: OR of the following bits: UE || ED || EC || LCO || NC || LCA || FF || JT */
+#define ETH_DMATXDESC_JT                      ((uint32_t)0x00004000)  /*!< Jabber Timeout */
+#define ETH_DMATXDESC_FF                      ((uint32_t)0x00002000)  /*!< Frame Flushed: DMA/MTL flushed the frame due to SW flush */
+#define ETH_DMATXDESC_PCE                     ((uint32_t)0x00001000)  /*!< Payload Checksum Error */
+#define ETH_DMATXDESC_LCA                     ((uint32_t)0x00000800)  /*!< Loss of Carrier: carrier lost during transmission */
+#define ETH_DMATXDESC_NC                      ((uint32_t)0x00000400)  /*!< No Carrier: no carrier signal from the transceiver */
+#define ETH_DMATXDESC_LCO                     ((uint32_t)0x00000200)  /*!< Late Collision: transmission aborted due to collision */
+#define ETH_DMATXDESC_EC                      ((uint32_t)0x00000100)  /*!< Excessive Collision: transmission aborted after 16 collisions */
+#define ETH_DMATXDESC_VF                      ((uint32_t)0x00000080)  /*!< VLAN Frame */
+#define ETH_DMATXDESC_CC                      ((uint32_t)0x00000078)  /*!< Collision Count */
+#define ETH_DMATXDESC_ED                      ((uint32_t)0x00000004)  /*!< Excessive Deferral */
+#define ETH_DMATXDESC_UF                      ((uint32_t)0x00000002)  /*!< Underflow Error: late data arrival from the memory */
+#define ETH_DMATXDESC_DB                      ((uint32_t)0x00000001)  /*!< Deferred Bit */
+
+/**
+  * @brief  Bit definition of TDES1 register
+  */
+#define ETH_DMATXDESC_TBS2  ((uint32_t)0x1FFF0000)  /*!< Transmit Buffer2 Size */
+#define ETH_DMATXDESC_TBS1  ((uint32_t)0x00001FFF)  /*!< Transmit Buffer1 Size */
+
+/**
+  * @brief  Bit definition of TDES2 register
+  */
+#define ETH_DMATXDESC_B1AP  ((uint32_t)0xFFFFFFFF)  /*!< Buffer1 Address Pointer */
+
+/**
+  * @brief  Bit definition of TDES3 register
+  */
+#define ETH_DMATXDESC_B2AP  ((uint32_t)0xFFFFFFFF)  /*!< Buffer2 Address Pointer */
+
+  /*---------------------------------------------------------------------------------------------
+  TDES6 |                         Transmit Time Stamp Low [31:0]                                 |
+  -----------------------------------------------------------------------------------------------
+  TDES7 |                         Transmit Time Stamp High [31:0]                                |
+  ----------------------------------------------------------------------------------------------*/
+
+/* Bit definition of TDES6 register */
+ #define ETH_DMAPTPTXDESC_TTSL  ((uint32_t)0xFFFFFFFF)  /* Transmit Time Stamp Low */
+
+/* Bit definition of TDES7 register */
+ #define ETH_DMAPTPTXDESC_TTSH  ((uint32_t)0xFFFFFFFF)  /* Transmit Time Stamp High */
+
+/**
+  * @}
+  */
+/** @defgroup ETH_DMA_RX_Descriptor ETH DMA RX Descriptor
+  * @{
+  */
+
+/*
+  DMA Rx Descriptor
+  --------------------------------------------------------------------------------------------------------------------
+  RDES0 | OWN(31) |                                             Status [30:0]                                          |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES1 | CTRL(31) | Reserved[30:29] | Buffer2 ByteCount[28:16] | CTRL[15:14] | Reserved(13) | Buffer1 ByteCount[12:0] |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES2 |                                       Buffer1 Address [31:0]                                                 |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES3 |                          Buffer2 Address [31:0] / Next Descriptor Address [31:0]                             |
+  ---------------------------------------------------------------------------------------------------------------------
+*/
+
+/**
+  * @brief  Bit definition of RDES0 register: DMA Rx descriptor status register
+  */
+#define ETH_DMARXDESC_OWN         ((uint32_t)0x80000000)  /*!< OWN bit: descriptor is owned by DMA engine  */
+#define ETH_DMARXDESC_AFM         ((uint32_t)0x40000000)  /*!< DA Filter Fail for the rx frame  */
+#define ETH_DMARXDESC_FL          ((uint32_t)0x3FFF0000)  /*!< Receive descriptor frame length  */
+#define ETH_DMARXDESC_ES          ((uint32_t)0x00008000)  /*!< Error summary: OR of the following bits: DE || OE || IPC || LC || RWT || RE || CE */
+#define ETH_DMARXDESC_DE          ((uint32_t)0x00004000)  /*!< Descriptor error: no more descriptors for receive frame  */
+#define ETH_DMARXDESC_SAF         ((uint32_t)0x00002000)  /*!< SA Filter Fail for the received frame */
+#define ETH_DMARXDESC_LE          ((uint32_t)0x00001000)  /*!< Frame size not matching with length field */
+#define ETH_DMARXDESC_OE          ((uint32_t)0x00000800)  /*!< Overflow Error: Frame was damaged due to buffer overflow */
+#define ETH_DMARXDESC_VLAN        ((uint32_t)0x00000400)  /*!< VLAN Tag: received frame is a VLAN frame */
+#define ETH_DMARXDESC_FS          ((uint32_t)0x00000200)  /*!< First descriptor of the frame  */
+#define ETH_DMARXDESC_LS          ((uint32_t)0x00000100)  /*!< Last descriptor of the frame  */
+#define ETH_DMARXDESC_IPV4HCE     ((uint32_t)0x00000080)  /*!< IPC Checksum Error: Rx Ipv4 header checksum error   */
+#define ETH_DMARXDESC_LC          ((uint32_t)0x00000040)  /*!< Late collision occurred during reception   */
+#define ETH_DMARXDESC_FT          ((uint32_t)0x00000020)  /*!< Frame type - Ethernet, otherwise 802.3    */
+#define ETH_DMARXDESC_RWT         ((uint32_t)0x00000010)  /*!< Receive Watchdog Timeout: watchdog timer expired during reception    */
+#define ETH_DMARXDESC_RE          ((uint32_t)0x00000008)  /*!< Receive error: error reported by MII interface  */
+#define ETH_DMARXDESC_DBE         ((uint32_t)0x00000004)  /*!< Dribble bit error: frame contains non int multiple of 8 bits  */
+#define ETH_DMARXDESC_CE          ((uint32_t)0x00000002)  /*!< CRC error */
+#define ETH_DMARXDESC_MAMPCE      ((uint32_t)0x00000001)  /*!< Rx MAC Address/Payload Checksum Error: Rx MAC address matched/ Rx Payload Checksum Error */
+
+/**
+  * @brief  Bit definition of RDES1 register
+  */
+#define ETH_DMARXDESC_DIC   ((uint32_t)0x80000000)  /*!< Disable Interrupt on Completion */
+#define ETH_DMARXDESC_RBS2  ((uint32_t)0x1FFF0000)  /*!< Receive Buffer2 Size */
+#define ETH_DMARXDESC_RER   ((uint32_t)0x00008000)  /*!< Receive End of Ring */
+#define ETH_DMARXDESC_RCH   ((uint32_t)0x00004000)  /*!< Second Address Chained */
+#define ETH_DMARXDESC_RBS1  ((uint32_t)0x00001FFF)  /*!< Receive Buffer1 Size */
+
+/**
+  * @brief  Bit definition of RDES2 register
+  */
+#define ETH_DMARXDESC_B1AP  ((uint32_t)0xFFFFFFFF)  /*!< Buffer1 Address Pointer */
+
+/**
+  * @brief  Bit definition of RDES3 register
+  */
+#define ETH_DMARXDESC_B2AP  ((uint32_t)0xFFFFFFFF)  /*!< Buffer2 Address Pointer */
+
+/*---------------------------------------------------------------------------------------------------------------------
+  RDES4 |                   Reserved[31:15]              |             Extended Status [14:0]                          |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES5 |                                            Reserved[31:0]                                                    |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES6 |                                       Receive Time Stamp Low [31:0]                                          |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES7 |                                       Receive Time Stamp High [31:0]                                         |
+  --------------------------------------------------------------------------------------------------------------------*/
+
+/* Bit definition of RDES4 register */
+#define ETH_DMAPTPRXDESC_PTPV     ((uint32_t)0x00002000)  /* PTP Version */
+#define ETH_DMAPTPRXDESC_PTPFT    ((uint32_t)0x00001000)  /* PTP Frame Type */
+#define ETH_DMAPTPRXDESC_PTPMT    ((uint32_t)0x00000F00)  /* PTP Message Type */
+  #define ETH_DMAPTPRXDESC_PTPMT_SYNC                      ((uint32_t)0x00000100)  /* SYNC message (all clock types) */
+  #define ETH_DMAPTPRXDESC_PTPMT_FOLLOWUP                  ((uint32_t)0x00000200)  /* FollowUp message (all clock types) */
+  #define ETH_DMAPTPRXDESC_PTPMT_DELAYREQ                  ((uint32_t)0x00000300)  /* DelayReq message (all clock types) */
+  #define ETH_DMAPTPRXDESC_PTPMT_DELAYRESP                 ((uint32_t)0x00000400)  /* DelayResp message (all clock types) */
+  #define ETH_DMAPTPRXDESC_PTPMT_PDELAYREQ_ANNOUNCE        ((uint32_t)0x00000500)  /* PdelayReq message (peer-to-peer transparent clock) or Announce message (Ordinary or Boundary clock) */
+  #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESP_MANAG          ((uint32_t)0x00000600)  /* PdelayResp message (peer-to-peer transparent clock) or Management message (Ordinary or Boundary clock)  */
+  #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESPFOLLOWUP_SIGNAL ((uint32_t)0x00000700)  /* PdelayRespFollowUp message (peer-to-peer transparent clock) or Signaling message (Ordinary or Boundary clock) */
+#define ETH_DMAPTPRXDESC_IPV6PR   ((uint32_t)0x00000080)  /* IPv6 Packet Received */
+#define ETH_DMAPTPRXDESC_IPV4PR   ((uint32_t)0x00000040)  /* IPv4 Packet Received */
+#define ETH_DMAPTPRXDESC_IPCB  ((uint32_t)0x00000020)  /* IP Checksum Bypassed */
+#define ETH_DMAPTPRXDESC_IPPE  ((uint32_t)0x00000010)  /* IP Payload Error */
+#define ETH_DMAPTPRXDESC_IPHE  ((uint32_t)0x00000008)  /* IP Header Error */
+#define ETH_DMAPTPRXDESC_IPPT  ((uint32_t)0x00000007)  /* IP Payload Type */
+  #define ETH_DMAPTPRXDESC_IPPT_UDP                 ((uint32_t)0x00000001)  /* UDP payload encapsulated in the IP datagram */
+  #define ETH_DMAPTPRXDESC_IPPT_TCP                 ((uint32_t)0x00000002)  /* TCP payload encapsulated in the IP datagram */
+  #define ETH_DMAPTPRXDESC_IPPT_ICMP                ((uint32_t)0x00000003)  /* ICMP payload encapsulated in the IP datagram */
+
+/* Bit definition of RDES6 register */
+#define ETH_DMAPTPRXDESC_RTSL  ((uint32_t)0xFFFFFFFF)  /* Receive Time Stamp Low */
+
+/* Bit definition of RDES7 register */
+#define ETH_DMAPTPRXDESC_RTSH  ((uint32_t)0xFFFFFFFF)  /* Receive Time Stamp High */
+/**
+  * @}
+  */
+ /** @defgroup ETH_AutoNegotiation ETH AutoNegotiation
+  * @{
+  */
+#define ETH_AUTONEGOTIATION_ENABLE     ((uint32_t)0x00000001)
+#define ETH_AUTONEGOTIATION_DISABLE    ((uint32_t)0x00000000)
+
+/**
+  * @}
+  */
+/** @defgroup ETH_Speed ETH Speed
+  * @{
+  */
+#define ETH_SPEED_10M        ((uint32_t)0x00000000)
+#define ETH_SPEED_100M       ((uint32_t)0x00004000)
+
+/**
+  * @}
+  */
+/** @defgroup ETH_Duplex_Mode ETH Duplex Mode
+  * @{
+  */
+#define ETH_MODE_FULLDUPLEX       ((uint32_t)0x00000800)
+#define ETH_MODE_HALFDUPLEX       ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+/** @defgroup ETH_Rx_Mode ETH Rx Mode
+  * @{
+  */
+#define ETH_RXPOLLING_MODE      ((uint32_t)0x00000000)
+#define ETH_RXINTERRUPT_MODE    ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Checksum_Mode ETH Checksum Mode
+  * @{
+  */
+#define ETH_CHECKSUM_BY_HARDWARE      ((uint32_t)0x00000000)
+#define ETH_CHECKSUM_BY_SOFTWARE      ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Media_Interface ETH Media Interface
+  * @{
+  */
+#define ETH_MEDIA_INTERFACE_MII       ((uint32_t)0x00000000)
+#define ETH_MEDIA_INTERFACE_RMII      ((uint32_t)SYSCFG_PMC_MII_RMII_SEL)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Watchdog ETH Watchdog
+  * @{
+  */
+#define ETH_WATCHDOG_ENABLE       ((uint32_t)0x00000000)
+#define ETH_WATCHDOG_DISABLE      ((uint32_t)0x00800000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Jabber ETH Jabber
+  * @{
+  */
+#define ETH_JABBER_ENABLE    ((uint32_t)0x00000000)
+#define ETH_JABBER_DISABLE   ((uint32_t)0x00400000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Inter_Frame_Gap ETH Inter Frame Gap
+  * @{
+  */
+#define ETH_INTERFRAMEGAP_96BIT   ((uint32_t)0x00000000)  /*!< minimum IFG between frames during transmission is 96Bit */
+#define ETH_INTERFRAMEGAP_88BIT   ((uint32_t)0x00020000)  /*!< minimum IFG between frames during transmission is 88Bit */
+#define ETH_INTERFRAMEGAP_80BIT   ((uint32_t)0x00040000)  /*!< minimum IFG between frames during transmission is 80Bit */
+#define ETH_INTERFRAMEGAP_72BIT   ((uint32_t)0x00060000)  /*!< minimum IFG between frames during transmission is 72Bit */
+#define ETH_INTERFRAMEGAP_64BIT   ((uint32_t)0x00080000)  /*!< minimum IFG between frames during transmission is 64Bit */
+#define ETH_INTERFRAMEGAP_56BIT   ((uint32_t)0x000A0000)  /*!< minimum IFG between frames during transmission is 56Bit */
+#define ETH_INTERFRAMEGAP_48BIT   ((uint32_t)0x000C0000)  /*!< minimum IFG between frames during transmission is 48Bit */
+#define ETH_INTERFRAMEGAP_40BIT   ((uint32_t)0x000E0000)  /*!< minimum IFG between frames during transmission is 40Bit */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Carrier_Sense ETH Carrier Sense
+  * @{
+  */
+#define ETH_CARRIERSENCE_ENABLE   ((uint32_t)0x00000000)
+#define ETH_CARRIERSENCE_DISABLE  ((uint32_t)0x00010000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_Own ETH Receive Own
+  * @{
+  */
+#define ETH_RECEIVEOWN_ENABLE     ((uint32_t)0x00000000)
+#define ETH_RECEIVEOWN_DISABLE    ((uint32_t)0x00002000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Loop_Back_Mode ETH Loop Back Mode
+  * @{
+  */
+#define ETH_LOOPBACKMODE_ENABLE        ((uint32_t)0x00001000)
+#define ETH_LOOPBACKMODE_DISABLE       ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Checksum_Offload ETH Checksum Offload
+  * @{
+  */
+#define ETH_CHECKSUMOFFLAOD_ENABLE     ((uint32_t)0x00000400)
+#define ETH_CHECKSUMOFFLAOD_DISABLE    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Retry_Transmission ETH Retry Transmission
+  * @{
+  */
+#define ETH_RETRYTRANSMISSION_ENABLE   ((uint32_t)0x00000000)
+#define ETH_RETRYTRANSMISSION_DISABLE  ((uint32_t)0x00000200)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Automatic_Pad_CRC_Strip ETH Automatic Pad CRC Strip
+  * @{
+  */
+#define ETH_AUTOMATICPADCRCSTRIP_ENABLE     ((uint32_t)0x00000080)
+#define ETH_AUTOMATICPADCRCSTRIP_DISABLE    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Back_Off_Limit ETH Back Off Limit
+  * @{
+  */
+#define ETH_BACKOFFLIMIT_10  ((uint32_t)0x00000000)
+#define ETH_BACKOFFLIMIT_8   ((uint32_t)0x00000020)
+#define ETH_BACKOFFLIMIT_4   ((uint32_t)0x00000040)
+#define ETH_BACKOFFLIMIT_1   ((uint32_t)0x00000060)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Deferral_Check ETH Deferral Check
+  * @{
+  */
+#define ETH_DEFFERRALCHECK_ENABLE       ((uint32_t)0x00000010)
+#define ETH_DEFFERRALCHECK_DISABLE      ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_All ETH Receive All
+  * @{
+  */
+#define ETH_RECEIVEALL_ENABLE     ((uint32_t)0x80000000)
+#define ETH_RECEIVEAll_DISABLE    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Source_Addr_Filter ETH Source Addr Filter
+  * @{
+  */
+#define ETH_SOURCEADDRFILTER_NORMAL_ENABLE       ((uint32_t)0x00000200)
+#define ETH_SOURCEADDRFILTER_INVERSE_ENABLE      ((uint32_t)0x00000300)
+#define ETH_SOURCEADDRFILTER_DISABLE             ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Pass_Control_Frames ETH Pass Control Frames
+  * @{
+  */
+#define ETH_PASSCONTROLFRAMES_BLOCKALL                ((uint32_t)0x00000040)  /*!< MAC filters all control frames from reaching the application */
+#define ETH_PASSCONTROLFRAMES_FORWARDALL              ((uint32_t)0x00000080)  /*!< MAC forwards all control frames to application even if they fail the Address Filter */
+#define ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER ((uint32_t)0x000000C0)  /*!< MAC forwards control frames that pass the Address Filter. */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Broadcast_Frames_Reception ETH Broadcast Frames Reception
+  * @{
+  */
+#define ETH_BROADCASTFRAMESRECEPTION_ENABLE     ((uint32_t)0x00000000)
+#define ETH_BROADCASTFRAMESRECEPTION_DISABLE    ((uint32_t)0x00000020)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Destination_Addr_Filter ETH Destination Addr Filter
+  * @{
+  */
+#define ETH_DESTINATIONADDRFILTER_NORMAL    ((uint32_t)0x00000000)
+#define ETH_DESTINATIONADDRFILTER_INVERSE   ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Promiscuous_Mode ETH Promiscuous Mode
+  * @{
+  */
+#define ETH_PROMISCUOUS_MODE_ENABLE     ((uint32_t)0x00000001)
+#define ETH_PROMISCUOUS_MODE_DISABLE    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Multicast_Frames_Filter ETH Multicast Frames Filter
+  * @{
+  */
+#define ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE    ((uint32_t)0x00000404)
+#define ETH_MULTICASTFRAMESFILTER_HASHTABLE           ((uint32_t)0x00000004)
+#define ETH_MULTICASTFRAMESFILTER_PERFECT             ((uint32_t)0x00000000)
+#define ETH_MULTICASTFRAMESFILTER_NONE                ((uint32_t)0x00000010)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Unicast_Frames_Filter ETH Unicast Frames Filter
+  * @{
+  */
+#define ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000402)
+#define ETH_UNICASTFRAMESFILTER_HASHTABLE        ((uint32_t)0x00000002)
+#define ETH_UNICASTFRAMESFILTER_PERFECT          ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Zero_Quanta_Pause ETH Zero Quanta Pause
+  * @{
+  */
+#define ETH_ZEROQUANTAPAUSE_ENABLE     ((uint32_t)0x00000000)
+#define ETH_ZEROQUANTAPAUSE_DISABLE    ((uint32_t)0x00000080)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Pause_Low_Threshold ETH Pause Low Threshold
+  * @{
+  */
+#define ETH_PAUSELOWTHRESHOLD_MINUS4        ((uint32_t)0x00000000)  /*!< Pause time minus 4 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS28       ((uint32_t)0x00000010)  /*!< Pause time minus 28 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS144      ((uint32_t)0x00000020)  /*!< Pause time minus 144 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS256      ((uint32_t)0x00000030)  /*!< Pause time minus 256 slot times */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Unicast_Pause_Frame_Detect ETH Unicast Pause Frame Detect
+  * @{
+  */
+#define ETH_UNICASTPAUSEFRAMEDETECT_ENABLE  ((uint32_t)0x00000008)
+#define ETH_UNICASTPAUSEFRAMEDETECT_DISABLE ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_Flow_Control ETH Receive Flow Control
+  * @{
+  */
+#define ETH_RECEIVEFLOWCONTROL_ENABLE       ((uint32_t)0x00000004)
+#define ETH_RECEIVEFLOWCONTROL_DISABLE      ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Transmit_Flow_Control ETH Transmit Flow Control
+  * @{
+  */
+#define ETH_TRANSMITFLOWCONTROL_ENABLE      ((uint32_t)0x00000002)
+#define ETH_TRANSMITFLOWCONTROL_DISABLE     ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_VLAN_Tag_Comparison ETH VLAN Tag Comparison
+  * @{
+  */
+#define ETH_VLANTAGCOMPARISON_12BIT    ((uint32_t)0x00010000)
+#define ETH_VLANTAGCOMPARISON_16BIT    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_addresses ETH MAC addresses
+  * @{
+  */
+#define ETH_MAC_ADDRESS0     ((uint32_t)0x00000000)
+#define ETH_MAC_ADDRESS1     ((uint32_t)0x00000008)
+#define ETH_MAC_ADDRESS2     ((uint32_t)0x00000010)
+#define ETH_MAC_ADDRESS3     ((uint32_t)0x00000018)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_addresses_filter_SA_DA ETH MAC addresses filter SA DA
+  * @{
+  */
+#define ETH_MAC_ADDRESSFILTER_SA       ((uint32_t)0x00000000)
+#define ETH_MAC_ADDRESSFILTER_DA       ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_addresses_filter_Mask_bytes ETH MAC addresses filter Mask bytes
+  * @{
+  */
+#define ETH_MAC_ADDRESSMASK_BYTE6      ((uint32_t)0x20000000)  /*!< Mask MAC Address high reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE5      ((uint32_t)0x10000000)  /*!< Mask MAC Address high reg bits [7:0] */
+#define ETH_MAC_ADDRESSMASK_BYTE4      ((uint32_t)0x08000000)  /*!< Mask MAC Address low reg bits [31:24] */
+#define ETH_MAC_ADDRESSMASK_BYTE3      ((uint32_t)0x04000000)  /*!< Mask MAC Address low reg bits [23:16] */
+#define ETH_MAC_ADDRESSMASK_BYTE2      ((uint32_t)0x02000000)  /*!< Mask MAC Address low reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE1      ((uint32_t)0x01000000)  /*!< Mask MAC Address low reg bits [70] */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_Debug_flags ETH MAC Debug flags
+  * @{
+  */
+#define ETH_MAC_TXFIFO_FULL          ((uint32_t)0x02000000)  /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY      ((uint32_t)0x01000000)  /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE  ((uint32_t)0x00400000)  /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE     ((uint32_t)0x00000000)  /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ     ((uint32_t)0x00100000)  /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING  ((uint32_t)0x00200000)  /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING  ((uint32_t)0x00300000)  /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE     ((uint32_t)0x00080000)  /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE            ((uint32_t)0x00000000)  /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING         ((uint32_t)0x00020000)  /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF   ((uint32_t)0x00040000)  /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING    ((uint32_t)0x00060000)  /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_MII_TRANSMIT_ACTIVE      ((uint32_t)0x00010000)  /* MAC MII transmit engine active */
+#define ETH_MAC_RXFIFO_EMPTY             ((uint32_t)0x00000000)  /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD   ((uint32_t)0x00000100)  /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD   ((uint32_t)0x00000200)  /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL              ((uint32_t)0x00000300)  /* Rx FIFO fill level: full */
+#define ETH_MAC_READCONTROLLER_IDLE               ((uint32_t)0x00000000)  /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA       ((uint32_t)0x00000020)  /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS     ((uint32_t)0x00000040)  /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#define ETH_MAC_READCONTROLLER_FLUSHING           ((uint32_t)0x00000060)  /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE     ((uint32_t)0x00000010)  /* Rx FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE    ((uint32_t)0x00000000)  /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE  ((uint32_t)0x00000002)  /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE ((uint32_t)0x00000004)  /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE    ((uint32_t)0x00000006)  /* MAC small FIFO read / write controllers active */
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE   ((uint32_t)0x00000001)  /* MAC MII receive protocol engine active */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Drop_TCP_IP_Checksum_Error_Frame ETH Drop TCP IP Checksum Error Frame
+  * @{
+  */
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE   ((uint32_t)0x00000000)
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE  ((uint32_t)0x04000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_Store_Forward ETH Receive Store Forward
+  * @{
+  */
+#define ETH_RECEIVESTOREFORWARD_ENABLE      ((uint32_t)0x02000000)
+#define ETH_RECEIVESTOREFORWARD_DISABLE     ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Flush_Received_Frame ETH Flush Received Frame
+  * @{
+  */
+#define ETH_FLUSHRECEIVEDFRAME_ENABLE       ((uint32_t)0x00000000)
+#define ETH_FLUSHRECEIVEDFRAME_DISABLE      ((uint32_t)0x01000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Transmit_Store_Forward ETH Transmit Store Forward
+  * @{
+  */
+#define ETH_TRANSMITSTOREFORWARD_ENABLE     ((uint32_t)0x00200000)
+#define ETH_TRANSMITSTOREFORWARD_DISABLE    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Transmit_Threshold_Control ETH Transmit Threshold Control
+  * @{
+  */
+#define ETH_TRANSMITTHRESHOLDCONTROL_64BYTES     ((uint32_t)0x00000000)  /*!< threshold level of the MTL Transmit FIFO is 64 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_128BYTES    ((uint32_t)0x00004000)  /*!< threshold level of the MTL Transmit FIFO is 128 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_192BYTES    ((uint32_t)0x00008000)  /*!< threshold level of the MTL Transmit FIFO is 192 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_256BYTES    ((uint32_t)0x0000C000)  /*!< threshold level of the MTL Transmit FIFO is 256 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_40BYTES     ((uint32_t)0x00010000)  /*!< threshold level of the MTL Transmit FIFO is 40 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_32BYTES     ((uint32_t)0x00014000)  /*!< threshold level of the MTL Transmit FIFO is 32 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_24BYTES     ((uint32_t)0x00018000)  /*!< threshold level of the MTL Transmit FIFO is 24 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_16BYTES     ((uint32_t)0x0001C000)  /*!< threshold level of the MTL Transmit FIFO is 16 Bytes */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Forward_Error_Frames ETH Forward Error Frames
+  * @{
+  */
+#define ETH_FORWARDERRORFRAMES_ENABLE       ((uint32_t)0x00000080)
+#define ETH_FORWARDERRORFRAMES_DISABLE      ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Forward_Undersized_Good_Frames ETH Forward Undersized Good Frames
+  * @{
+  */
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE   ((uint32_t)0x00000040)
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE  ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_Threshold_Control ETH Receive Threshold Control
+  * @{
+  */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES      ((uint32_t)0x00000000)  /*!< threshold level of the MTL Receive FIFO is 64 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES      ((uint32_t)0x00000008)  /*!< threshold level of the MTL Receive FIFO is 32 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES      ((uint32_t)0x00000010)  /*!< threshold level of the MTL Receive FIFO is 96 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES     ((uint32_t)0x00000018)  /*!< threshold level of the MTL Receive FIFO is 128 Bytes */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Second_Frame_Operate ETH Second Frame Operate
+  * @{
+  */
+#define ETH_SECONDFRAMEOPERARTE_ENABLE       ((uint32_t)0x00000004)
+#define ETH_SECONDFRAMEOPERARTE_DISABLE      ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Address_Aligned_Beats ETH Address Aligned Beats
+  * @{
+  */
+#define ETH_ADDRESSALIGNEDBEATS_ENABLE      ((uint32_t)0x02000000)
+#define ETH_ADDRESSALIGNEDBEATS_DISABLE     ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Fixed_Burst ETH Fixed Burst
+  * @{
+  */
+#define ETH_FIXEDBURST_ENABLE     ((uint32_t)0x00010000)
+#define ETH_FIXEDBURST_DISABLE    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Rx_DMA_Burst_Length ETH Rx DMA Burst Length
+  * @{
+  */
+#define ETH_RXDMABURSTLENGTH_1BEAT          ((uint32_t)0x00020000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 1 */
+#define ETH_RXDMABURSTLENGTH_2BEAT          ((uint32_t)0x00040000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 2 */
+#define ETH_RXDMABURSTLENGTH_4BEAT          ((uint32_t)0x00080000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_8BEAT          ((uint32_t)0x00100000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_16BEAT         ((uint32_t)0x00200000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_32BEAT         ((uint32_t)0x00400000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_4BEAT    ((uint32_t)0x01020000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_8BEAT    ((uint32_t)0x01040000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_16BEAT   ((uint32_t)0x01080000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_32BEAT   ((uint32_t)0x01100000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_64BEAT   ((uint32_t)0x01200000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 64 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_128BEAT  ((uint32_t)0x01400000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 128 */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Tx_DMA_Burst_Length ETH Tx DMA Burst Length
+  * @{
+  */
+#define ETH_TXDMABURSTLENGTH_1BEAT          ((uint32_t)0x00000100)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+#define ETH_TXDMABURSTLENGTH_2BEAT          ((uint32_t)0x00000200)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+#define ETH_TXDMABURSTLENGTH_4BEAT          ((uint32_t)0x00000400)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_8BEAT          ((uint32_t)0x00000800)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_16BEAT         ((uint32_t)0x00001000)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_32BEAT         ((uint32_t)0x00002000)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_4BEAT    ((uint32_t)0x01000100)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_8BEAT    ((uint32_t)0x01000200)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_16BEAT   ((uint32_t)0x01000400)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_32BEAT   ((uint32_t)0x01000800)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_64BEAT   ((uint32_t)0x01001000)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_128BEAT  ((uint32_t)0x01002000)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Enhanced_descriptor_format ETH DMA Enhanced descriptor format
+  * @{
+  */
+#define ETH_DMAENHANCEDDESCRIPTOR_ENABLE              ((uint32_t)0x00000080)
+#define ETH_DMAENHANCEDDESCRIPTOR_DISABLE             ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Arbitration ETH DMA Arbitration
+  * @{
+  */
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1   ((uint32_t)0x00000000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1   ((uint32_t)0x00004000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1   ((uint32_t)0x00008000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1   ((uint32_t)0x0000C000)
+#define ETH_DMAARBITRATION_RXPRIORTX             ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Tx_descriptor_segment ETH DMA Tx descriptor segment
+  * @{
+  */
+#define ETH_DMATXDESC_LASTSEGMENTS      ((uint32_t)0x40000000)  /*!< Last Segment */
+#define ETH_DMATXDESC_FIRSTSEGMENT      ((uint32_t)0x20000000)  /*!< First Segment */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Tx_descriptor_Checksum_Insertion_Control ETH DMA Tx descriptor Checksum Insertion Control
+  * @{
+  */
+#define ETH_DMATXDESC_CHECKSUMBYPASS             ((uint32_t)0x00000000)   /*!< Checksum engine bypass */
+#define ETH_DMATXDESC_CHECKSUMIPV4HEADER         ((uint32_t)0x00400000)   /*!< IPv4 header checksum insertion  */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT  ((uint32_t)0x00800000)   /*!< TCP/UDP/ICMP checksum insertion. Pseudo header checksum is assumed to be present */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL     ((uint32_t)0x00C00000)   /*!< TCP/UDP/ICMP checksum fully in hardware including pseudo header */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Rx_descriptor_buffers ETH DMA Rx descriptor buffers
+  * @{
+  */
+#define ETH_DMARXDESC_BUFFER1     ((uint32_t)0x00000000)  /*!< DMA Rx Desc Buffer1 */
+#define ETH_DMARXDESC_BUFFER2     ((uint32_t)0x00000001)  /*!< DMA Rx Desc Buffer2 */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_PMT_Flags ETH PMT Flags
+  * @{
+  */
+#define ETH_PMT_FLAG_WUFFRPR      ((uint32_t)0x80000000)  /*!< Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_PMT_FLAG_WUFR         ((uint32_t)0x00000040)  /*!< Wake-Up Frame Received */
+#define ETH_PMT_FLAG_MPR          ((uint32_t)0x00000020)  /*!< Magic Packet Received */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MMC_Tx_Interrupts ETH MMC Tx Interrupts
+  * @{
+  */
+#define ETH_MMC_IT_TGF       ((uint32_t)0x00200000)  /*!< When Tx good frame counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFMSC    ((uint32_t)0x00008000)  /*!< When Tx good multi col counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFSC     ((uint32_t)0x00004000)  /*!< When Tx good single col counter reaches half the maximum value */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MMC_Rx_Interrupts ETH MMC Rx Interrupts
+  * @{
+  */
+#define ETH_MMC_IT_RGUF      ((uint32_t)0x10020000)  /*!< When Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMC_IT_RFAE      ((uint32_t)0x10000040)  /*!< When Rx alignment error counter reaches half the maximum value */
+#define ETH_MMC_IT_RFCE      ((uint32_t)0x10000020)  /*!< When Rx crc error counter reaches half the maximum value */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_Flags ETH MAC Flags
+  * @{
+  */
+#define ETH_MAC_FLAG_TST     ((uint32_t)0x00000200)  /*!< Time stamp trigger flag (on MAC) */
+#define ETH_MAC_FLAG_MMCT    ((uint32_t)0x00000040)  /*!< MMC transmit flag  */
+#define ETH_MAC_FLAG_MMCR    ((uint32_t)0x00000020)  /*!< MMC receive flag */
+#define ETH_MAC_FLAG_MMC     ((uint32_t)0x00000010)  /*!< MMC flag (on MAC) */
+#define ETH_MAC_FLAG_PMT     ((uint32_t)0x00000008)  /*!< PMT flag (on MAC) */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Flags ETH DMA Flags
+  * @{
+  */
+#define ETH_DMA_FLAG_TST               ((uint32_t)0x20000000)  /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_FLAG_PMT               ((uint32_t)0x10000000)  /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_FLAG_MMC               ((uint32_t)0x08000000)  /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_FLAG_DATATRANSFERERROR ((uint32_t)0x00800000)  /*!< Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMA_FLAG_READWRITEERROR    ((uint32_t)0x01000000)  /*!< Error bits 0-write transfer, 1-read transfer */
+#define ETH_DMA_FLAG_ACCESSERROR       ((uint32_t)0x02000000)  /*!< Error bits 0-data buffer, 1-desc. access */
+#define ETH_DMA_FLAG_NIS               ((uint32_t)0x00010000)  /*!< Normal interrupt summary flag */
+#define ETH_DMA_FLAG_AIS               ((uint32_t)0x00008000)  /*!< Abnormal interrupt summary flag */
+#define ETH_DMA_FLAG_ER                ((uint32_t)0x00004000)  /*!< Early receive flag */
+#define ETH_DMA_FLAG_FBE               ((uint32_t)0x00002000)  /*!< Fatal bus error flag */
+#define ETH_DMA_FLAG_ET                ((uint32_t)0x00000400)  /*!< Early transmit flag */
+#define ETH_DMA_FLAG_RWT               ((uint32_t)0x00000200)  /*!< Receive watchdog timeout flag */
+#define ETH_DMA_FLAG_RPS               ((uint32_t)0x00000100)  /*!< Receive process stopped flag */
+#define ETH_DMA_FLAG_RBU               ((uint32_t)0x00000080)  /*!< Receive buffer unavailable flag */
+#define ETH_DMA_FLAG_R                 ((uint32_t)0x00000040)  /*!< Receive flag */
+#define ETH_DMA_FLAG_TU                ((uint32_t)0x00000020)  /*!< Underflow flag */
+#define ETH_DMA_FLAG_RO                ((uint32_t)0x00000010)  /*!< Overflow flag */
+#define ETH_DMA_FLAG_TJT               ((uint32_t)0x00000008)  /*!< Transmit jabber timeout flag */
+#define ETH_DMA_FLAG_TBU               ((uint32_t)0x00000004)  /*!< Transmit buffer unavailable flag */
+#define ETH_DMA_FLAG_TPS               ((uint32_t)0x00000002)  /*!< Transmit process stopped flag */
+#define ETH_DMA_FLAG_T                 ((uint32_t)0x00000001)  /*!< Transmit flag */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_Interrupts ETH MAC Interrupts
+  * @{
+  */
+#define ETH_MAC_IT_TST       ((uint32_t)0x00000200)  /*!< Time stamp trigger interrupt (on MAC) */
+#define ETH_MAC_IT_MMCT      ((uint32_t)0x00000040)  /*!< MMC transmit interrupt */
+#define ETH_MAC_IT_MMCR      ((uint32_t)0x00000020)  /*!< MMC receive interrupt */
+#define ETH_MAC_IT_MMC       ((uint32_t)0x00000010)  /*!< MMC interrupt (on MAC) */
+#define ETH_MAC_IT_PMT       ((uint32_t)0x00000008)  /*!< PMT interrupt (on MAC) */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Interrupts ETH DMA Interrupts
+  * @{
+  */
+#define ETH_DMA_IT_TST       ((uint32_t)0x20000000)  /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_IT_PMT       ((uint32_t)0x10000000)  /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_IT_MMC       ((uint32_t)0x08000000)  /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_IT_NIS       ((uint32_t)0x00010000)  /*!< Normal interrupt summary */
+#define ETH_DMA_IT_AIS       ((uint32_t)0x00008000)  /*!< Abnormal interrupt summary */
+#define ETH_DMA_IT_ER        ((uint32_t)0x00004000)  /*!< Early receive interrupt */
+#define ETH_DMA_IT_FBE       ((uint32_t)0x00002000)  /*!< Fatal bus error interrupt */
+#define ETH_DMA_IT_ET        ((uint32_t)0x00000400)  /*!< Early transmit interrupt */
+#define ETH_DMA_IT_RWT       ((uint32_t)0x00000200)  /*!< Receive watchdog timeout interrupt */
+#define ETH_DMA_IT_RPS       ((uint32_t)0x00000100)  /*!< Receive process stopped interrupt */
+#define ETH_DMA_IT_RBU       ((uint32_t)0x00000080)  /*!< Receive buffer unavailable interrupt */
+#define ETH_DMA_IT_R         ((uint32_t)0x00000040)  /*!< Receive interrupt */
+#define ETH_DMA_IT_TU        ((uint32_t)0x00000020)  /*!< Underflow interrupt */
+#define ETH_DMA_IT_RO        ((uint32_t)0x00000010)  /*!< Overflow interrupt */
+#define ETH_DMA_IT_TJT       ((uint32_t)0x00000008)  /*!< Transmit jabber timeout interrupt */
+#define ETH_DMA_IT_TBU       ((uint32_t)0x00000004)  /*!< Transmit buffer unavailable interrupt */
+#define ETH_DMA_IT_TPS       ((uint32_t)0x00000002)  /*!< Transmit process stopped interrupt */
+#define ETH_DMA_IT_T         ((uint32_t)0x00000001)  /*!< Transmit interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_transmit_process_state ETH DMA transmit process state
+  * @{
+  */
+#define ETH_DMA_TRANSMITPROCESS_STOPPED     ((uint32_t)0x00000000)  /*!< Stopped - Reset or Stop Tx Command issued */
+#define ETH_DMA_TRANSMITPROCESS_FETCHING    ((uint32_t)0x00100000)  /*!< Running - fetching the Tx descriptor */
+#define ETH_DMA_TRANSMITPROCESS_WAITING     ((uint32_t)0x00200000)  /*!< Running - waiting for status */
+#define ETH_DMA_TRANSMITPROCESS_READING     ((uint32_t)0x00300000)  /*!< Running - reading the data from host memory */
+#define ETH_DMA_TRANSMITPROCESS_SUSPENDED   ((uint32_t)0x00600000)  /*!< Suspended - Tx Descriptor unavailable */
+#define ETH_DMA_TRANSMITPROCESS_CLOSING     ((uint32_t)0x00700000)  /*!< Running - closing Rx descriptor */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup ETH_DMA_receive_process_state ETH DMA receive process state
+  * @{
+  */
+#define ETH_DMA_RECEIVEPROCESS_STOPPED      ((uint32_t)0x00000000)  /*!< Stopped - Reset or Stop Rx Command issued */
+#define ETH_DMA_RECEIVEPROCESS_FETCHING     ((uint32_t)0x00020000)  /*!< Running - fetching the Rx descriptor */
+#define ETH_DMA_RECEIVEPROCESS_WAITING      ((uint32_t)0x00060000)  /*!< Running - waiting for packet */
+#define ETH_DMA_RECEIVEPROCESS_SUSPENDED    ((uint32_t)0x00080000)  /*!< Suspended - Rx Descriptor unavailable */
+#define ETH_DMA_RECEIVEPROCESS_CLOSING      ((uint32_t)0x000A0000)  /*!< Running - closing descriptor */
+#define ETH_DMA_RECEIVEPROCESS_QUEUING      ((uint32_t)0x000E0000)  /*!< Running - queuing the receive frame into host memory */
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_overflow ETH DMA overflow
+  * @{
+  */
+#define ETH_DMA_OVERFLOW_RXFIFOCOUNTER      ((uint32_t)0x10000000)  /*!< Overflow bit for FIFO overflow counter */
+#define ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER ((uint32_t)0x00010000)  /*!< Overflow bit for missed frame counter */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_EXTI_LINE_WAKEUP ETH EXTI LINE WAKEUP
+  * @{
+  */
+#define ETH_EXTI_LINE_WAKEUP              ((uint32_t)0x00080000)  /*!< External interrupt line 19 Connected to the ETH EXTI Line */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Macros ETH Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/** @brief Reset ETH handle state
+  * @param  __HANDLE__: specifies the ETH handle.
+  * @retval None
+  */
+#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ETH_STATE_RESET)
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA Tx Desc flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag of TDES0 to check.
+  * @retval the ETH_DMATxDescFlag (SET or RESET).
+  */
+#define __HAL_ETH_DMATXDESC_GET_FLAG(__HANDLE__, __FLAG__)             ((__HANDLE__)->TxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA Rx Desc flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag of RDES0 to check.
+  * @retval the ETH_DMATxDescFlag (SET or RESET).
+  */
+#define __HAL_ETH_DMARXDESC_GET_FLAG(__HANDLE__, __FLAG__)             ((__HANDLE__)->RxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+  * @brief  Enables the specified DMA Rx Desc receive interrupt.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMARXDESC_ENABLE_IT(__HANDLE__)                          ((__HANDLE__)->RxDesc->ControlBufferSize &=(~(uint32_t)ETH_DMARXDESC_DIC))
+
+/**
+  * @brief  Disables the specified DMA Rx Desc receive interrupt.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMARXDESC_DISABLE_IT(__HANDLE__)                         ((__HANDLE__)->RxDesc->ControlBufferSize |= ETH_DMARXDESC_DIC)
+
+/**
+  * @brief  Set the specified DMA Rx Desc Own bit.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMARXDESC_SET_OWN_BIT(__HANDLE__)                           ((__HANDLE__)->RxDesc->Status |= ETH_DMARXDESC_OWN)
+
+/**
+  * @brief  Returns the specified ETHERNET DMA Tx Desc collision count.
+  * @param  __HANDLE__: ETH Handle
+  * @retval The Transmit descriptor collision counter value.
+  */
+#define __HAL_ETH_DMATXDESC_GET_COLLISION_COUNT(__HANDLE__)                   (((__HANDLE__)->TxDesc->Status & ETH_DMATXDESC_CC) >> ETH_DMATXDESC_COLLISION_COUNTSHIFT)
+
+/**
+  * @brief  Set the specified DMA Tx Desc Own bit.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_SET_OWN_BIT(__HANDLE__)                       ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_OWN)
+
+/**
+  * @brief  Enables the specified DMA Tx Desc Transmit interrupt.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_ENABLE_IT(__HANDLE__)                          ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_IC)
+
+/**
+  * @brief  Disables the specified DMA Tx Desc Transmit interrupt.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_DISABLE_IT(__HANDLE__)                          ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_IC)
+
+/**
+  * @brief  Selects the specified ETHERNET DMA Tx Desc Checksum Insertion.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __CHECKSUM__: specifies is the DMA Tx desc checksum insertion.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_DMATXDESC_CHECKSUMBYPASS : Checksum bypass
+  *     @arg ETH_DMATXDESC_CHECKSUMIPV4HEADER : IPv4 header checksum
+  *     @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT : TCP/UDP/ICMP checksum. Pseudo header checksum is assumed to be present
+  *     @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL : TCP/UDP/ICMP checksum fully in hardware including pseudo header
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_CHECKSUM_INSERTION(__HANDLE__, __CHECKSUM__)     ((__HANDLE__)->TxDesc->Status |= (__CHECKSUM__))
+
+/**
+  * @brief  Enables the DMA Tx Desc CRC.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_CRC_ENABLE(__HANDLE__)                          ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DC)
+
+/**
+  * @brief  Disables the DMA Tx Desc CRC.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_CRC_DISABLE(__HANDLE__)                         ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DC)
+
+/**
+  * @brief  Enables the DMA Tx Desc padding for frame shorter than 64 bytes.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_ENABLE(__HANDLE__)            ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DP)
+
+/**
+  * @brief  Disables the DMA Tx Desc padding for frame shorter than 64 bytes.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_DISABLE(__HANDLE__)           ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DP)
+
+/**
+ * @brief  Enables the specified ETHERNET MAC interrupts.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+  *   enabled or disabled.
+  *   This parameter can be any combination of the following values:
+  *     @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+  *     @arg ETH_MAC_IT_PMT : PMT interrupt
+  * @retval None
+  */
+#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__)                 ((__HANDLE__)->Instance->MACIMR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified ETHERNET MAC interrupts.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+  *   enabled or disabled.
+  *   This parameter can be any combination of the following values:
+  *     @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+  *     @arg ETH_MAC_IT_PMT : PMT interrupt
+  * @retval None
+  */
+#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__)                ((__HANDLE__)->Instance->MACIMR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Initiate a Pause Control Frame (Full-duplex only).
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_INITIATE_PAUSE_CONTROL_FRAME(__HANDLE__)              ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+  * @brief  Checks whether the ETHERNET flow control busy bit is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @retval The new state of flow control busy status bit (SET or RESET).
+  */
+#define __HAL_ETH_GET_FLOW_CONTROL_BUSY_STATUS(__HANDLE__)               (((__HANDLE__)->Instance->MACFCR & ETH_MACFCR_FCBBPA) == ETH_MACFCR_FCBBPA)
+
+/**
+  * @brief  Enables the MAC Back Pressure operation activation (Half-duplex only).
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_ENABLE(__HANDLE__)          ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+  * @brief  Disables the MAC BackPressure operation activation (Half-duplex only).
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_DISABLE(__HANDLE__)         ((__HANDLE__)->Instance->MACFCR &= ~ETH_MACFCR_FCBBPA)
+
+/**
+  * @brief  Checks whether the specified ETHERNET MAC flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_MAC_FLAG_TST  : Time stamp trigger flag
+  *     @arg ETH_MAC_FLAG_MMCT : MMC transmit flag
+  *     @arg ETH_MAC_FLAG_MMCR : MMC receive flag
+  *     @arg ETH_MAC_FLAG_MMC  : MMC flag
+  *     @arg ETH_MAC_FLAG_PMT  : PMT flag
+  * @retval The state of ETHERNET MAC flag.
+  */
+#define __HAL_ETH_MAC_GET_FLAG(__HANDLE__, __FLAG__)                   (((__HANDLE__)->Instance->MACSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+  * @brief  Enables the specified ETHERNET DMA interrupts.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+  *   enabled @ref ETH_DMA_Interrupts
+  * @retval None
+  */
+#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__)                 ((__HANDLE__)->Instance->DMAIER |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified ETHERNET DMA interrupts.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+  *   disabled. @ref ETH_DMA_Interrupts
+  * @retval None
+  */
+#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__)                ((__HANDLE__)->Instance->DMAIER &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Clears the ETHERNET DMA IT pending bit.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts
+  * @retval None
+  */
+#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__)      ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA flag is set or not.
+* @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag to check. @ref ETH_DMA_Flags
+  * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+  */
+#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__)                   (((__HANDLE__)->Instance->DMASR &( __FLAG__)) == ( __FLAG__))
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag to clear. @ref ETH_DMA_Flags
+  * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+  */
+#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__)                 ((__HANDLE__)->Instance->DMASR = (__FLAG__))
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA overflow flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __OVERFLOW__: specifies the DMA overflow flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_DMA_OVERFLOW_RXFIFOCOUNTER : Overflow for FIFO Overflows Counter
+  *     @arg ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER : Overflow for Buffer Unavailable Missed Frame Counter
+  * @retval The state of ETHERNET DMA overflow Flag (SET or RESET).
+  */
+#define __HAL_ETH_GET_DMA_OVERFLOW_STATUS(__HANDLE__, __OVERFLOW__)       (((__HANDLE__)->Instance->DMAMFBOCR & (__OVERFLOW__)) == (__OVERFLOW__))
+
+/**
+  * @brief  Set the DMA Receive status watchdog timer register value
+  * @param  __HANDLE__: ETH Handle
+  * @param  __VALUE__: DMA Receive status watchdog timer register value
+  * @retval None
+  */
+#define __HAL_ETH_SET_RECEIVE_WATCHDOG_TIMER(__HANDLE__, __VALUE__)       ((__HANDLE__)->Instance->DMARSWTR = (__VALUE__))
+
+/**
+  * @brief  Enables any unicast packet filtered by the MAC address
+  *   recognition to be a wake-up frame.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_ENABLE(__HANDLE__)               ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_GU)
+
+/**
+  * @brief  Disables any unicast packet filtered by the MAC address
+  *   recognition to be a wake-up frame.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_DISABLE(__HANDLE__)              ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_GU)
+
+/**
+  * @brief  Enables the MAC Wake-Up Frame Detection.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_ENABLE(__HANDLE__)              ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_WFE)
+
+/**
+  * @brief  Disables the MAC Wake-Up Frame Detection.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_DISABLE(__HANDLE__)             ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+  * @brief  Enables the MAC Magic Packet Detection.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_ENABLE(__HANDLE__)              ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_MPE)
+
+/**
+  * @brief  Disables the MAC Magic Packet Detection.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_DISABLE(__HANDLE__)             ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+  * @brief  Enables the MAC Power Down.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_POWER_DOWN_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_PD)
+
+/**
+  * @brief  Disables the MAC Power Down.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_POWER_DOWN_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_PD)
+
+/**
+  * @brief  Checks whether the specified ETHERNET PMT flag is set or not.
+  * @param  __HANDLE__: ETH Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_PMT_FLAG_WUFFRPR : Wake-Up Frame Filter Register Pointer Reset
+  *     @arg ETH_PMT_FLAG_WUFR    : Wake-Up Frame Received
+  *     @arg ETH_PMT_FLAG_MPR     : Magic Packet Received
+  * @retval The new state of ETHERNET PMT Flag (SET or RESET).
+  */
+#define __HAL_ETH_GET_PMT_FLAG_STATUS(__HANDLE__, __FLAG__)               (((__HANDLE__)->Instance->MACPMTCSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+  * @brief  Preset and Initialize the MMC counters to almost-full value: 0xFFFF_FFF0 (full - 16)
+  * @param   __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTER_FULL_PRESET(__HANDLE__)                     ((__HANDLE__)->Instance->MMCCR |= (ETH_MMCCR_MCFHP | ETH_MMCCR_MCP))
+
+/**
+  * @brief  Preset and Initialize the MMC counters to almost-half value: 0x7FFF_FFF0 (half - 16)
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTER_HALF_PRESET(__HANDLE__)                     do{(__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCFHP;\
+                                                                          (__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCP;} while (0)
+
+/**
+  * @brief  Enables the MMC Counter Freeze.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_ENABLE(__HANDLE__)                  ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCF)
+
+/**
+  * @brief  Disables the MMC Counter Freeze.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_DISABLE(__HANDLE__)                 ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCF)
+
+/**
+  * @brief  Enables the MMC Reset On Read.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_ENABLE(__HANDLE__)                ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_ROR)
+
+/**
+  * @brief  Disables the MMC Reset On Read.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_DISABLE(__HANDLE__)               ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_ROR)
+
+/**
+  * @brief  Enables the MMC Counter Stop Rollover.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_ENABLE(__HANDLE__)            ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_CSR)
+
+/**
+  * @brief  Disables the MMC Counter Stop Rollover.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_DISABLE(__HANDLE__)           ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CSR)
+
+/**
+  * @brief  Resets the MMC Counters.
+  * @param   __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTERS_RESET(__HANDLE__)                         ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CR)
+
+/**
+  * @brief  Enables the specified ETHERNET MMC Rx interrupts.
+  * @param   __HANDLE__: ETH Handle.
+  * @param  __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_MMC_IT_RGUF  : When Rx good unicast frames counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_RFAE  : When Rx alignment error counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_RFCE  : When Rx crc error counter reaches half the maximum value
+  * @retval None
+  */
+#define __HAL_ETH_MMC_RX_IT_ENABLE(__HANDLE__, __INTERRUPT__)               (__HANDLE__)->Instance->MMCRIMR &= ~((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+  * @brief  Disables the specified ETHERNET MMC Rx interrupts.
+  * @param   __HANDLE__: ETH Handle.
+  * @param  __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_MMC_IT_RGUF  : When Rx good unicast frames counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_RFAE  : When Rx alignment error counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_RFCE  : When Rx crc error counter reaches half the maximum value
+  * @retval None
+  */
+#define __HAL_ETH_MMC_RX_IT_DISABLE(__HANDLE__, __INTERRUPT__)              (__HANDLE__)->Instance->MMCRIMR |= ((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+  * @brief  Enables the specified ETHERNET MMC Tx interrupts.
+  * @param   __HANDLE__: ETH Handle.
+  * @param  __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_MMC_IT_TGF   : When Tx good frame counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+  * @retval None
+  */
+#define __HAL_ETH_MMC_TX_IT_ENABLE(__HANDLE__, __INTERRUPT__)            ((__HANDLE__)->Instance->MMCRIMR &= ~ (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified ETHERNET MMC Tx interrupts.
+  * @param   __HANDLE__: ETH Handle.
+  * @param  __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_MMC_IT_TGF   : When Tx good frame counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+  *     @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+  * @retval None
+  */
+#define __HAL_ETH_MMC_TX_IT_DISABLE(__HANDLE__, __INTERRUPT__)           ((__HANDLE__)->Instance->MMCRIMR |= (__INTERRUPT__))
+
+/**
+  * @brief  Enables the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Disables the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief Enable event on ETH External event line.
+  * @retval None.
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_EVENT()  EXTI->EMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief Disable event on ETH External event line
+  * @retval None.
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_EVENT() EXTI->EMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Get flag of the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Clear flag of the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Enables rising edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER()  EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP
+
+/**
+  * @brief  Disables the rising edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_RISING_EDGE_TRIGGER()  EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Enables falling edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER()  EXTI->FTSR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Disables falling edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLING_EDGE_TRIGGER()  EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Enables rising/falling edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER()  EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP;\
+                                                              EXTI->FTSR |= ETH_EXTI_LINE_WAKEUP
+
+/**
+  * @brief  Disables rising/falling edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLINGRISING_TRIGGER()  EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+                                                               EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief Generate a Software interrupt on selected EXTI line.
+  * @retval None.
+  */
+#define __HAL_ETH_WAKEUP_EXTI_GENERATE_SWIT()                  EXTI->SWIER|= ETH_EXTI_LINE_WAKEUP
+
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup ETH_Exported_Functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions  ****************************/
+
+/** @addtogroup ETH_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t* TxBuff, uint32_t TxBuffCount);
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount);
+
+/**
+  * @}
+  */
+/* IO operation functions  ****************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group2
+  * @{
+  */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength);
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth);
+/* Communication with PHY functions*/
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue);
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth);
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth);
+/* Callback in non blocking modes (Interrupt) */
+void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group3
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf);
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group4
+  * @{
+  */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_ETH_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h
new file mode 100644
index 0000000..b71d877
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h
@@ -0,0 +1,442 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of FLASH HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_H
+#define __STM32F4xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+  * @{
+  */
+
+/**
+  * @brief  FLASH Procedure structure definition
+  */
+typedef enum
+{
+  FLASH_PROC_NONE = 0,
+  FLASH_PROC_SECTERASE,
+  FLASH_PROC_MASSERASE,
+  FLASH_PROC_PROGRAM
+} FLASH_ProcedureTypeDef;
+
+/**
+  * @brief  FLASH handle Structure definition
+  */
+typedef struct
+{
+  __IO FLASH_ProcedureTypeDef ProcedureOnGoing;   /*Internal variable to indicate which procedure is ongoing or not in IT context*/
+
+  __IO uint32_t               NbSectorsToErase;   /*Internal variable to save the remaining sectors to erase in IT context*/
+
+  __IO uint8_t                VoltageForErase;    /*Internal variable to provide voltage range selected by user in IT context*/
+
+  __IO uint32_t               Sector;             /*Internal variable to define the current sector which is erasing*/
+
+  __IO uint32_t               Bank;               /*Internal variable to save current bank selected during mass erase*/
+
+  __IO uint32_t               Address;            /*Internal variable to save address selected for program*/
+
+  HAL_LockTypeDef             Lock;               /* FLASH locking object                */
+
+  __IO uint32_t               ErrorCode;          /* FLASH error code                    */
+
+}FLASH_ProcessTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+  * @{
+  */
+/** @defgroup FLASH_Error_Code FLASH Error Code
+  * @brief    FLASH Error Code
+  * @{
+  */
+#define HAL_FLASH_ERROR_NONE         ((uint32_t)0x00000000)    /*!< No error                      */
+#define HAL_FLASH_ERROR_RD           ((uint32_t)0x00000001)    /*!< Read Protection error         */
+#define HAL_FLASH_ERROR_PGS          ((uint32_t)0x00000002)    /*!< Programming Sequence error    */
+#define HAL_FLASH_ERROR_PGP          ((uint32_t)0x00000004)    /*!< Programming Parallelism error */
+#define HAL_FLASH_ERROR_PGA          ((uint32_t)0x00000008)    /*!< Programming Alignment error   */
+#define HAL_FLASH_ERROR_WRP          ((uint32_t)0x00000010)    /*!< Write protection error        */
+#define HAL_FLASH_ERROR_OPERATION    ((uint32_t)0x00000020)    /*!< Operation Error               */
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+  * @{
+  */
+#define FLASH_TYPEPROGRAM_BYTE        ((uint32_t)0x00)  /*!< Program byte (8-bit) at a specified address           */
+#define FLASH_TYPEPROGRAM_HALFWORD    ((uint32_t)0x01)  /*!< Program a half-word (16-bit) at a specified address   */
+#define FLASH_TYPEPROGRAM_WORD        ((uint32_t)0x02)  /*!< Program a word (32-bit) at a specified address        */
+#define FLASH_TYPEPROGRAM_DOUBLEWORD  ((uint32_t)0x03)  /*!< Program a double word (64-bit) at a specified address */
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+  * @brief Flag definition
+  * @{
+  */
+#define FLASH_FLAG_EOP                 FLASH_SR_EOP            /*!< FLASH End of Operation flag               */
+#define FLASH_FLAG_OPERR               FLASH_SR_SOP            /*!< FLASH operation Error flag                */
+#define FLASH_FLAG_WRPERR              FLASH_SR_WRPERR         /*!< FLASH Write protected error flag          */
+#define FLASH_FLAG_PGAERR              FLASH_SR_PGAERR         /*!< FLASH Programming Alignment error flag    */
+#define FLASH_FLAG_PGPERR              FLASH_SR_PGPERR         /*!< FLASH Programming Parallelism error flag  */
+#define FLASH_FLAG_PGSERR              FLASH_SR_PGSERR         /*!< FLASH Programming Sequence error flag     */
+#define FLASH_FLAG_RDERR               ((uint32_t)0x00000100)  /*!< Read Protection error flag (PCROP)        */
+#define FLASH_FLAG_BSY                 FLASH_SR_BSY            /*!< FLASH Busy flag                           */
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+  * @brief FLASH Interrupt definition
+  * @{
+  */
+#define FLASH_IT_EOP                   FLASH_CR_EOPIE          /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR                   ((uint32_t)0x02000000)  /*!< Error Interrupt source                  */
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
+  * @{
+  */
+#define FLASH_PSIZE_BYTE           ((uint32_t)0x00000000)
+#define FLASH_PSIZE_HALF_WORD      ((uint32_t)0x00000100)
+#define FLASH_PSIZE_WORD           ((uint32_t)0x00000200)
+#define FLASH_PSIZE_DOUBLE_WORD    ((uint32_t)0x00000300)
+#define CR_PSIZE_MASK              ((uint32_t)0xFFFFFCFF)
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Keys FLASH Keys
+  * @{
+  */
+#define RDP_KEY                  ((uint16_t)0x00A5)
+#define FLASH_KEY1               ((uint32_t)0x45670123)
+#define FLASH_KEY2               ((uint32_t)0xCDEF89AB)
+#define FLASH_OPT_KEY1           ((uint32_t)0x08192A3B)
+#define FLASH_OPT_KEY2           ((uint32_t)0x4C5D6E7F)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+  * @{
+  */
+/**
+  * @brief  Set the FLASH Latency.
+  * @param  __LATENCY__: FLASH Latency
+  *         The value of this parameter depend on device used within the same series
+  * @retval none
+  */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
+
+/**
+  * @brief  Get the FLASH Latency.
+  * @retval FLASH Latency
+  *          The value of this parameter depend on device used within the same series
+  */
+#define __HAL_FLASH_GET_LATENCY()     (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+  * @brief  Enable the FLASH prefetch buffer.
+  * @retval none
+  */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE()  (FLASH->ACR |= FLASH_ACR_PRFTEN)
+
+/**
+  * @brief  Disable the FLASH prefetch buffer.
+  * @retval none
+  */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
+
+/**
+  * @brief  Enable the FLASH instruction cache.
+  * @retval none
+  */
+#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE()  (FLASH->ACR |= FLASH_ACR_ICEN)
+
+/**
+  * @brief  Disable the FLASH instruction cache.
+  * @retval none
+  */
+#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_ICEN))
+
+/**
+  * @brief  Enable the FLASH data cache.
+  * @retval none
+  */
+#define __HAL_FLASH_DATA_CACHE_ENABLE()  (FLASH->ACR |= FLASH_ACR_DCEN)
+
+/**
+  * @brief  Disable the FLASH data cache.
+  * @retval none
+  */
+#define __HAL_FLASH_DATA_CACHE_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_DCEN))
+
+/**
+  * @brief  Resets the FLASH instruction Cache.
+  * @note   This function must be used only when the Instruction Cache is disabled.
+  * @retval None
+  */
+#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST;  \
+                                                  FLASH->ACR &= ~FLASH_ACR_ICRST; \
+                                                 }while(0)
+
+/**
+  * @brief  Resets the FLASH data Cache.
+  * @note   This function must be used only when the data Cache is disabled.
+  * @retval None
+  */
+#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST;  \
+                                           FLASH->ACR &= ~FLASH_ACR_DCRST; \
+                                          }while(0)
+/**
+  * @brief  Enable the specified FLASH interrupt.
+  * @param  __INTERRUPT__ : FLASH interrupt
+  *         This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+  *     @arg FLASH_IT_ERR: Error Interrupt
+  * @retval none
+  */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  (FLASH->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified FLASH interrupt.
+  * @param  __INTERRUPT__ : FLASH interrupt
+  *         This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+  *     @arg FLASH_IT_ERR: Error Interrupt
+  * @retval none
+  */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+  * @brief  Get the specified FLASH flag status.
+  * @param  __FLAG__: specifies the FLASH flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag
+  *            @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+  *            @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+  *            @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+  *            @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+  *            @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
+  *            @arg FLASH_FLAG_BSY   : FLASH Busy flag
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_FLASH_GET_FLAG(__FLAG__)   ((FLASH->SR & (__FLAG__)))
+
+/**
+  * @brief  Clear the specified FLASH flag.
+  * @param  __FLAG__: specifies the FLASH flags to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag
+  *            @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+  *            @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+  *            @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+  *            @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+  *            @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
+  * @retval none
+  */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)   (FLASH->SR = (__FLAG__))
+/**
+  * @}
+  */
+
+/* Include FLASH HAL Extension module */
+#include "stm32f4xx_hal_flash_ex.h"
+#include "stm32f4xx_hal_flash_ramfunc.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+  * @{
+  */
+/** @addtogroup FLASH_Exported_Functions_Group1
+  * @{
+  */
+/* Program operation functions  ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions  **********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  ************************************************/
+uint32_t HAL_FLASH_GetError(void);
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Constants FLASH Private Constants
+  * @{
+  */
+
+/**
+  * @brief   ACR register byte 0 (Bits[7:0]) base address
+  */
+#define ACR_BYTE0_ADDRESS           ((uint32_t)0x40023C00)
+/**
+  * @brief   OPTCR register byte 0 (Bits[7:0]) base address
+  */
+#define OPTCR_BYTE0_ADDRESS         ((uint32_t)0x40023C14)
+/**
+  * @brief   OPTCR register byte 1 (Bits[15:8]) base address
+  */
+#define OPTCR_BYTE1_ADDRESS         ((uint32_t)0x40023C15)
+/**
+  * @brief   OPTCR register byte 2 (Bits[23:16]) base address
+  */
+#define OPTCR_BYTE2_ADDRESS         ((uint32_t)0x40023C16)
+/**
+  * @brief   OPTCR register byte 3 (Bits[31:24]) base address
+  */
+#define OPTCR_BYTE3_ADDRESS         ((uint32_t)0x40023C17)
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+  * @{
+  */
+
+/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
+  * @{
+  */
+#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
+                                    ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+                                    ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
+                                    ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h
new file mode 100644
index 0000000..e48e63e
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h
@@ -0,0 +1,866 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of FLASH HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_EX_H
+#define __STM32F4xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASHEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Types FLASH Exported Types
+  * @{
+  */
+
+/**
+  * @brief  FLASH Erase structure definition
+  */
+typedef struct
+{
+  uint32_t TypeErase;   /*!< Mass erase or sector Erase.
+                             This parameter can be a value of @ref FLASHEx_Type_Erase */
+
+  uint32_t Banks;       /*!< Select banks to erase when Mass erase is enabled.
+                             This parameter must be a value of @ref FLASHEx_Banks */
+
+  uint32_t Sector;      /*!< Initial FLASH sector to erase when Mass erase is disabled
+                             This parameter must be a value of @ref FLASHEx_Sectors */
+
+  uint32_t NbSectors;   /*!< Number of sectors to be erased.
+                             This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
+
+  uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
+                             This parameter must be a value of @ref FLASHEx_Voltage_Range */
+
+} FLASH_EraseInitTypeDef;
+
+/**
+  * @brief  FLASH Option Bytes Program structure definition
+  */
+typedef struct
+{
+  uint32_t OptionType;   /*!< Option byte to be configured.
+                              This parameter can be a value of @ref FLASHEx_Option_Type */
+
+  uint32_t WRPState;     /*!< Write protection activation or deactivation.
+                              This parameter can be a value of @ref FLASHEx_WRP_State */
+
+  uint32_t WRPSector;         /*!< Specifies the sector(s) to be write protected.
+                              The value of this parameter depend on device used within the same series */
+
+  uint32_t Banks;        /*!< Select banks for WRP activation/deactivation of all sectors.
+                              This parameter must be a value of @ref FLASHEx_Banks */
+
+  uint32_t RDPLevel;     /*!< Set the read protection level.
+                              This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
+
+  uint32_t BORLevel;     /*!< Set the BOR Level.
+                              This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
+
+  uint8_t  USERConfig;   /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */
+
+} FLASH_OBProgramInitTypeDef;
+
+/**
+  * @brief  FLASH Advanced Option Bytes Program structure definition
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+typedef struct
+{
+  uint32_t OptionType;     /*!< Option byte to be configured for extension.
+                                This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */
+
+  uint32_t PCROPState;     /*!< PCROP activation or deactivation.
+                                This parameter can be a value of @ref FLASHEx_PCROP_State */
+
+#if defined (STM32F401xC) || defined (STM32F401xE) || defined (STM32F411xE) || defined (STM32F446xx)
+  uint16_t Sectors;        /*!< specifies the sector(s) set for PCROP.
+                                This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  uint32_t Banks;          /*!< Select banks for PCROP activation/deactivation of all sectors.
+                                This parameter must be a value of @ref FLASHEx_Banks */
+
+  uint16_t SectorsBank1;   /*!< Specifies the sector(s) set for PCROP for Bank1.
+                                This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+
+  uint16_t SectorsBank2;   /*!< Specifies the sector(s) set for PCROP for Bank2.
+                                This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+
+  uint8_t BootConfig;      /*!< Specifies Option bytes for boot config.
+                                This parameter can be a value of @ref FLASHEx_Dual_Boot */
+
+#endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+} FLASH_AdvOBProgramInitTypeDef;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
+  * @{
+  */
+
+/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
+  * @{
+  */
+#define FLASH_TYPEERASE_SECTORS         ((uint32_t)0x00)  /*!< Sectors erase only          */
+#define FLASH_TYPEERASE_MASSERASE       ((uint32_t)0x01)  /*!< Flash Mass erase activation */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
+  * @{
+  */
+#define FLASH_VOLTAGE_RANGE_1        ((uint32_t)0x00)  /*!< Device operating range: 1.8V to 2.1V                */
+#define FLASH_VOLTAGE_RANGE_2        ((uint32_t)0x01)  /*!< Device operating range: 2.1V to 2.7V                */
+#define FLASH_VOLTAGE_RANGE_3        ((uint32_t)0x02)  /*!< Device operating range: 2.7V to 3.6V                */
+#define FLASH_VOLTAGE_RANGE_4        ((uint32_t)0x03)  /*!< Device operating range: 2.7V to 3.6V + External Vpp */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_WRP_State FLASH WRP State
+  * @{
+  */
+#define OB_WRPSTATE_DISABLE       ((uint32_t)0x00)  /*!< Disable the write protection of the desired bank 1 sectors */
+#define OB_WRPSTATE_ENABLE        ((uint32_t)0x01)  /*!< Enable the write protection of the desired bank 1 sectors  */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Option_Type FLASH Option Type
+  * @{
+  */
+#define OPTIONBYTE_WRP        ((uint32_t)0x01)  /*!< WRP option byte configuration  */
+#define OPTIONBYTE_RDP        ((uint32_t)0x02)  /*!< RDP option byte configuration  */
+#define OPTIONBYTE_USER       ((uint32_t)0x04)  /*!< USER option byte configuration */
+#define OPTIONBYTE_BOR        ((uint32_t)0x08)  /*!< BOR option byte configuration  */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
+  * @{
+  */
+#define OB_RDP_LEVEL_0   ((uint8_t)0xAA)
+#define OB_RDP_LEVEL_1   ((uint8_t)0x55)
+#define OB_RDP_LEVEL_2   ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2
+                                              it s no more possible to go back to level 1 or 0 */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
+  * @{
+  */
+#define OB_IWDG_SW                     ((uint8_t)0x20)  /*!< Software IWDG selected */
+#define OB_IWDG_HW                     ((uint8_t)0x00)  /*!< Hardware IWDG selected */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
+  * @{
+  */
+#define OB_STOP_NO_RST                 ((uint8_t)0x40) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST                    ((uint8_t)0x00) /*!< Reset generated when entering in STOP    */
+/**
+  * @}
+  */
+
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
+  * @{
+  */
+#define OB_STDBY_NO_RST                ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST                   ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY    */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
+  * @{
+  */
+#define OB_BOR_LEVEL3          ((uint8_t)0x00)  /*!< Supply voltage ranges from 2.70 to 3.60 V */
+#define OB_BOR_LEVEL2          ((uint8_t)0x04)  /*!< Supply voltage ranges from 2.40 to 2.70 V */
+#define OB_BOR_LEVEL1          ((uint8_t)0x08)  /*!< Supply voltage ranges from 2.10 to 2.40 V */
+#define OB_BOR_OFF             ((uint8_t)0x0C)  /*!< Supply voltage ranges from 1.62 to 2.10 V */
+/**
+  * @}
+  */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+/** @defgroup FLASHEx_PCROP_State FLASH PCROP State
+  * @{
+  */
+#define OB_PCROP_STATE_DISABLE       ((uint32_t)0x00)  /*!< Disable PCROP */
+#define OB_PCROP_STATE_ENABLE        ((uint32_t)0x01)  /*!< Enable PCROP  */
+/**
+  * @}
+  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+/** @defgroup FLASHEx_Advanced_Option_Type FLASH Advanced Option Type
+  * @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#define OPTIONBYTE_PCROP        ((uint32_t)0x01)  /*!< PCROP option byte configuration      */
+#define OPTIONBYTE_BOOTCONFIG   ((uint32_t)0x02)  /*!< BOOTConfig option byte configuration */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)  || defined(STM32F446xx)
+#define OPTIONBYTE_PCROP        ((uint32_t)0x01)  /*!<PCROP option byte configuration */
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Latency FLASH Latency
+  * @{
+  */
+/*------------------------------------------- STM32F42xxx/STM32F43xxx------------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_LATENCY_0                FLASH_ACR_LATENCY_0WS   /*!< FLASH Zero Latency cycle      */
+#define FLASH_LATENCY_1                FLASH_ACR_LATENCY_1WS   /*!< FLASH One Latency cycle       */
+#define FLASH_LATENCY_2                FLASH_ACR_LATENCY_2WS   /*!< FLASH Two Latency cycles      */
+#define FLASH_LATENCY_3                FLASH_ACR_LATENCY_3WS   /*!< FLASH Three Latency cycles    */
+#define FLASH_LATENCY_4                FLASH_ACR_LATENCY_4WS   /*!< FLASH Four Latency cycles     */
+#define FLASH_LATENCY_5                FLASH_ACR_LATENCY_5WS   /*!< FLASH Five Latency cycles     */
+#define FLASH_LATENCY_6                FLASH_ACR_LATENCY_6WS   /*!< FLASH Six Latency cycles      */
+#define FLASH_LATENCY_7                FLASH_ACR_LATENCY_7WS   /*!< FLASH Seven Latency cycles    */
+#define FLASH_LATENCY_8                FLASH_ACR_LATENCY_8WS   /*!< FLASH Eight Latency cycles    */
+#define FLASH_LATENCY_9                FLASH_ACR_LATENCY_9WS   /*!< FLASH Nine Latency cycles     */
+#define FLASH_LATENCY_10               FLASH_ACR_LATENCY_10WS  /*!< FLASH Ten Latency cycles      */
+#define FLASH_LATENCY_11               FLASH_ACR_LATENCY_11WS  /*!< FLASH Eleven Latency cycles   */
+#define FLASH_LATENCY_12               FLASH_ACR_LATENCY_12WS  /*!< FLASH Twelve Latency cycles   */
+#define FLASH_LATENCY_13               FLASH_ACR_LATENCY_13WS  /*!< FLASH Thirteen Latency cycles */
+#define FLASH_LATENCY_14               FLASH_ACR_LATENCY_14WS  /*!< FLASH Fourteen Latency cycles */
+#define FLASH_LATENCY_15               FLASH_ACR_LATENCY_15WS  /*!< FLASH Fifteen Latency cycles  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*--------------------------------------------------------------------------------------------------------------*/
+
+/*-------------------------- STM32F40xxx/STM32F41xxx/STM32F401xx/STM32F411xx -----------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+
+#define FLASH_LATENCY_0                FLASH_ACR_LATENCY_0WS   /*!< FLASH Zero Latency cycle      */
+#define FLASH_LATENCY_1                FLASH_ACR_LATENCY_1WS   /*!< FLASH One Latency cycle       */
+#define FLASH_LATENCY_2                FLASH_ACR_LATENCY_2WS   /*!< FLASH Two Latency cycles      */
+#define FLASH_LATENCY_3                FLASH_ACR_LATENCY_3WS   /*!< FLASH Three Latency cycles    */
+#define FLASH_LATENCY_4                FLASH_ACR_LATENCY_4WS   /*!< FLASH Four Latency cycles     */
+#define FLASH_LATENCY_5                FLASH_ACR_LATENCY_5WS   /*!< FLASH Five Latency cycles     */
+#define FLASH_LATENCY_6                FLASH_ACR_LATENCY_6WS   /*!< FLASH Six Latency cycles      */
+#define FLASH_LATENCY_7                FLASH_ACR_LATENCY_7WS   /*!< FLASH Seven Latency cycles    */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F411xE || STM32F446xx */
+/*--------------------------------------------------------------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+
+/** @defgroup FLASHEx_Banks FLASH Banks
+  * @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_BANK_1     ((uint32_t)1) /*!< Bank 1   */
+#define FLASH_BANK_2     ((uint32_t)2) /*!< Bank 2   */
+#define FLASH_BANK_BOTH  ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define FLASH_BANK_1     ((uint32_t)1) /*!< Bank 1   */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F411xE || STM32F446xx */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
+  * @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_MER_BIT     (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits here to clear */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define FLASH_MER_BIT     (FLASH_CR_MER) /*!< only 1 MER Bit */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F411xE || STM32F446xx */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Sectors FLASH Sectors
+  * @{
+  */
+/*------------------------------------------ STM32F42xxx/STM32F43xxx--------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_SECTOR_0     ((uint32_t)0)  /*!< Sector Number 0   */
+#define FLASH_SECTOR_1     ((uint32_t)1)  /*!< Sector Number 1   */
+#define FLASH_SECTOR_2     ((uint32_t)2)  /*!< Sector Number 2   */
+#define FLASH_SECTOR_3     ((uint32_t)3)  /*!< Sector Number 3   */
+#define FLASH_SECTOR_4     ((uint32_t)4)  /*!< Sector Number 4   */
+#define FLASH_SECTOR_5     ((uint32_t)5)  /*!< Sector Number 5   */
+#define FLASH_SECTOR_6     ((uint32_t)6)  /*!< Sector Number 6   */
+#define FLASH_SECTOR_7     ((uint32_t)7)  /*!< Sector Number 7   */
+#define FLASH_SECTOR_8     ((uint32_t)8)  /*!< Sector Number 8   */
+#define FLASH_SECTOR_9     ((uint32_t)9)  /*!< Sector Number 9   */
+#define FLASH_SECTOR_10    ((uint32_t)10) /*!< Sector Number 10  */
+#define FLASH_SECTOR_11    ((uint32_t)11) /*!< Sector Number 11  */
+#define FLASH_SECTOR_12    ((uint32_t)12) /*!< Sector Number 12  */
+#define FLASH_SECTOR_13    ((uint32_t)13) /*!< Sector Number 13  */
+#define FLASH_SECTOR_14    ((uint32_t)14) /*!< Sector Number 14  */
+#define FLASH_SECTOR_15    ((uint32_t)15) /*!< Sector Number 15  */
+#define FLASH_SECTOR_16    ((uint32_t)16) /*!< Sector Number 16  */
+#define FLASH_SECTOR_17    ((uint32_t)17) /*!< Sector Number 17  */
+#define FLASH_SECTOR_18    ((uint32_t)18) /*!< Sector Number 18  */
+#define FLASH_SECTOR_19    ((uint32_t)19) /*!< Sector Number 19  */
+#define FLASH_SECTOR_20    ((uint32_t)20) /*!< Sector Number 20  */
+#define FLASH_SECTOR_21    ((uint32_t)21) /*!< Sector Number 21  */
+#define FLASH_SECTOR_22    ((uint32_t)22) /*!< Sector Number 22  */
+#define FLASH_SECTOR_23    ((uint32_t)23) /*!< Sector Number 23  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FLASH_SECTOR_0     ((uint32_t)0)  /*!< Sector Number 0   */
+#define FLASH_SECTOR_1     ((uint32_t)1)  /*!< Sector Number 1   */
+#define FLASH_SECTOR_2     ((uint32_t)2)  /*!< Sector Number 2   */
+#define FLASH_SECTOR_3     ((uint32_t)3)  /*!< Sector Number 3   */
+#define FLASH_SECTOR_4     ((uint32_t)4)  /*!< Sector Number 4   */
+#define FLASH_SECTOR_5     ((uint32_t)5)  /*!< Sector Number 5   */
+#define FLASH_SECTOR_6     ((uint32_t)6)  /*!< Sector Number 6   */
+#define FLASH_SECTOR_7     ((uint32_t)7)  /*!< Sector Number 7   */
+#define FLASH_SECTOR_8     ((uint32_t)8)  /*!< Sector Number 8   */
+#define FLASH_SECTOR_9     ((uint32_t)9)  /*!< Sector Number 9   */
+#define FLASH_SECTOR_10    ((uint32_t)10) /*!< Sector Number 10  */
+#define FLASH_SECTOR_11    ((uint32_t)11) /*!< Sector Number 11  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define FLASH_SECTOR_0     ((uint32_t)0) /*!< Sector Number 0   */
+#define FLASH_SECTOR_1     ((uint32_t)1) /*!< Sector Number 1   */
+#define FLASH_SECTOR_2     ((uint32_t)2) /*!< Sector Number 2   */
+#define FLASH_SECTOR_3     ((uint32_t)3) /*!< Sector Number 3   */
+#define FLASH_SECTOR_4     ((uint32_t)4) /*!< Sector Number 4   */
+#define FLASH_SECTOR_5     ((uint32_t)5) /*!< Sector Number 5   */
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F401xE/STM32F411xE/STM32F446xx ------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE) ||  defined(STM32F446xx)
+#define FLASH_SECTOR_0     ((uint32_t)0) /*!< Sector Number 0   */
+#define FLASH_SECTOR_1     ((uint32_t)1) /*!< Sector Number 1   */
+#define FLASH_SECTOR_2     ((uint32_t)2) /*!< Sector Number 2   */
+#define FLASH_SECTOR_3     ((uint32_t)3) /*!< Sector Number 3   */
+#define FLASH_SECTOR_4     ((uint32_t)4) /*!< Sector Number 4   */
+#define FLASH_SECTOR_5     ((uint32_t)5) /*!< Sector Number 5   */
+#define FLASH_SECTOR_6     ((uint32_t)6) /*!< Sector Number 6   */
+#define FLASH_SECTOR_7     ((uint32_t)7) /*!< Sector Number 7   */
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
+  * @{
+  */
+/*----------------------------------------- STM32F42xxx/STM32F43xxx-------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OB_WRP_SECTOR_0       ((uint32_t)0x00000001) /*!< Write protection of Sector0     */
+#define OB_WRP_SECTOR_1       ((uint32_t)0x00000002) /*!< Write protection of Sector1     */
+#define OB_WRP_SECTOR_2       ((uint32_t)0x00000004) /*!< Write protection of Sector2     */
+#define OB_WRP_SECTOR_3       ((uint32_t)0x00000008) /*!< Write protection of Sector3     */
+#define OB_WRP_SECTOR_4       ((uint32_t)0x00000010) /*!< Write protection of Sector4     */
+#define OB_WRP_SECTOR_5       ((uint32_t)0x00000020) /*!< Write protection of Sector5     */
+#define OB_WRP_SECTOR_6       ((uint32_t)0x00000040) /*!< Write protection of Sector6     */
+#define OB_WRP_SECTOR_7       ((uint32_t)0x00000080) /*!< Write protection of Sector7     */
+#define OB_WRP_SECTOR_8       ((uint32_t)0x00000100) /*!< Write protection of Sector8     */
+#define OB_WRP_SECTOR_9       ((uint32_t)0x00000200) /*!< Write protection of Sector9     */
+#define OB_WRP_SECTOR_10      ((uint32_t)0x00000400) /*!< Write protection of Sector10    */
+#define OB_WRP_SECTOR_11      ((uint32_t)0x00000800) /*!< Write protection of Sector11    */
+#define OB_WRP_SECTOR_12      ((uint32_t)0x00000001 << 12) /*!< Write protection of Sector12    */
+#define OB_WRP_SECTOR_13      ((uint32_t)0x00000002 << 12) /*!< Write protection of Sector13    */
+#define OB_WRP_SECTOR_14      ((uint32_t)0x00000004 << 12) /*!< Write protection of Sector14    */
+#define OB_WRP_SECTOR_15      ((uint32_t)0x00000008 << 12) /*!< Write protection of Sector15    */
+#define OB_WRP_SECTOR_16      ((uint32_t)0x00000010 << 12) /*!< Write protection of Sector16    */
+#define OB_WRP_SECTOR_17      ((uint32_t)0x00000020 << 12) /*!< Write protection of Sector17    */
+#define OB_WRP_SECTOR_18      ((uint32_t)0x00000040 << 12) /*!< Write protection of Sector18    */
+#define OB_WRP_SECTOR_19      ((uint32_t)0x00000080 << 12) /*!< Write protection of Sector19    */
+#define OB_WRP_SECTOR_20      ((uint32_t)0x00000100 << 12) /*!< Write protection of Sector20    */
+#define OB_WRP_SECTOR_21      ((uint32_t)0x00000200 << 12) /*!< Write protection of Sector21    */
+#define OB_WRP_SECTOR_22      ((uint32_t)0x00000400 << 12) /*!< Write protection of Sector22    */
+#define OB_WRP_SECTOR_23      ((uint32_t)0x00000800 << 12) /*!< Write protection of Sector23    */
+#define OB_WRP_SECTOR_All     ((uint32_t)0x00000FFF << 12) /*!< Write protection of all Sectors */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define OB_WRP_SECTOR_0       ((uint32_t)0x00000001) /*!< Write protection of Sector0     */
+#define OB_WRP_SECTOR_1       ((uint32_t)0x00000002) /*!< Write protection of Sector1     */
+#define OB_WRP_SECTOR_2       ((uint32_t)0x00000004) /*!< Write protection of Sector2     */
+#define OB_WRP_SECTOR_3       ((uint32_t)0x00000008) /*!< Write protection of Sector3     */
+#define OB_WRP_SECTOR_4       ((uint32_t)0x00000010) /*!< Write protection of Sector4     */
+#define OB_WRP_SECTOR_5       ((uint32_t)0x00000020) /*!< Write protection of Sector5     */
+#define OB_WRP_SECTOR_6       ((uint32_t)0x00000040) /*!< Write protection of Sector6     */
+#define OB_WRP_SECTOR_7       ((uint32_t)0x00000080) /*!< Write protection of Sector7     */
+#define OB_WRP_SECTOR_8       ((uint32_t)0x00000100) /*!< Write protection of Sector8     */
+#define OB_WRP_SECTOR_9       ((uint32_t)0x00000200) /*!< Write protection of Sector9     */
+#define OB_WRP_SECTOR_10      ((uint32_t)0x00000400) /*!< Write protection of Sector10    */
+#define OB_WRP_SECTOR_11      ((uint32_t)0x00000800) /*!< Write protection of Sector11    */
+#define OB_WRP_SECTOR_All     ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define OB_WRP_SECTOR_0       ((uint32_t)0x00000001) /*!< Write protection of Sector0     */
+#define OB_WRP_SECTOR_1       ((uint32_t)0x00000002) /*!< Write protection of Sector1     */
+#define OB_WRP_SECTOR_2       ((uint32_t)0x00000004) /*!< Write protection of Sector2     */
+#define OB_WRP_SECTOR_3       ((uint32_t)0x00000008) /*!< Write protection of Sector3     */
+#define OB_WRP_SECTOR_4       ((uint32_t)0x00000010) /*!< Write protection of Sector4     */
+#define OB_WRP_SECTOR_5       ((uint32_t)0x00000020) /*!< Write protection of Sector5     */
+#define OB_WRP_SECTOR_All     ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F401xE/STM32F411xE/STM32F446xx ------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define OB_WRP_SECTOR_0       ((uint32_t)0x00000001) /*!< Write protection of Sector0     */
+#define OB_WRP_SECTOR_1       ((uint32_t)0x00000002) /*!< Write protection of Sector1     */
+#define OB_WRP_SECTOR_2       ((uint32_t)0x00000004) /*!< Write protection of Sector2     */
+#define OB_WRP_SECTOR_3       ((uint32_t)0x00000008) /*!< Write protection of Sector3     */
+#define OB_WRP_SECTOR_4       ((uint32_t)0x00000010) /*!< Write protection of Sector4     */
+#define OB_WRP_SECTOR_5       ((uint32_t)0x00000020) /*!< Write protection of Sector5     */
+#define OB_WRP_SECTOR_6       ((uint32_t)0x00000040) /*!< Write protection of Sector6     */
+#define OB_WRP_SECTOR_7       ((uint32_t)0x00000080) /*!< Write protection of Sector7     */
+#define OB_WRP_SECTOR_All     ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+/*-----------------------------------------------------------------------------------------------------*/
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Option_Bytes_PC_ReadWrite_Protection FLASH Option Bytes PC ReadWrite Protection
+  * @{
+  */
+/*----------------------------------------- STM32F42xxx/STM32F43xxx-------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OB_PCROP_SECTOR_0        ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0      */
+#define OB_PCROP_SECTOR_1        ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1      */
+#define OB_PCROP_SECTOR_2        ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2      */
+#define OB_PCROP_SECTOR_3        ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3      */
+#define OB_PCROP_SECTOR_4        ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4      */
+#define OB_PCROP_SECTOR_5        ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5      */
+#define OB_PCROP_SECTOR_6        ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector6      */
+#define OB_PCROP_SECTOR_7        ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector7      */
+#define OB_PCROP_SECTOR_8        ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector8      */
+#define OB_PCROP_SECTOR_9        ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector9      */
+#define OB_PCROP_SECTOR_10       ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector10     */
+#define OB_PCROP_SECTOR_11       ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector11     */
+#define OB_PCROP_SECTOR_12       ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector12     */
+#define OB_PCROP_SECTOR_13       ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector13     */
+#define OB_PCROP_SECTOR_14       ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector14     */
+#define OB_PCROP_SECTOR_15       ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector15     */
+#define OB_PCROP_SECTOR_16       ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector16     */
+#define OB_PCROP_SECTOR_17       ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector17     */
+#define OB_PCROP_SECTOR_18       ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector18     */
+#define OB_PCROP_SECTOR_19       ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector19     */
+#define OB_PCROP_SECTOR_20       ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector20     */
+#define OB_PCROP_SECTOR_21       ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector21     */
+#define OB_PCROP_SECTOR_22       ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector22     */
+#define OB_PCROP_SECTOR_23       ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector23     */
+#define OB_PCROP_SECTOR_All      ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define OB_PCROP_SECTOR_0        ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0      */
+#define OB_PCROP_SECTOR_1        ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1      */
+#define OB_PCROP_SECTOR_2        ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2      */
+#define OB_PCROP_SECTOR_3        ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3      */
+#define OB_PCROP_SECTOR_4        ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4      */
+#define OB_PCROP_SECTOR_5        ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5      */
+#define OB_PCROP_SECTOR_All      ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors  */
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*------------------------------ STM32F401xE/STM32F411xE/STM32F446xx ----------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define OB_PCROP_SECTOR_0        ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0      */
+#define OB_PCROP_SECTOR_1        ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1      */
+#define OB_PCROP_SECTOR_2        ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2      */
+#define OB_PCROP_SECTOR_3        ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3      */
+#define OB_PCROP_SECTOR_4        ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4      */
+#define OB_PCROP_SECTOR_5        ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5      */
+#define OB_PCROP_SECTOR_6        ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector6      */
+#define OB_PCROP_SECTOR_7        ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector7      */
+#define OB_PCROP_SECTOR_All      ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors  */
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Dual_Boot FLASH Dual Boot
+  * @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OB_DUAL_BOOT_ENABLE   ((uint8_t)0x10) /*!< Dual Bank Boot Enable                             */
+#define OB_DUAL_BOOT_DISABLE  ((uint8_t)0x00) /*!< Dual Bank Boot Disable, always boot on User Flash */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/**
+  * @}
+  */
+
+/** @defgroup  FLASHEx_Selection_Protection_Mode FLASH Selection Protection Mode
+  * @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define OB_PCROP_DESELECTED     ((uint8_t)0x00) /*!< Disabled PcROP, nWPRi bits used for Write Protection on sector i */
+#define OB_PCROP_SELECTED       ((uint8_t)0x80) /*!< Enable PcROP, nWPRi bits used for PCRoP Protection on sector i   */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group1
+  * @{
+  */
+/* Extension Program operation functions  *************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void              HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
+void              HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
+HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void);
+HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+uint16_t          HAL_FLASHEx_OB_GetBank2WRP(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Constants FLASH Private Constants
+  * @{
+  */
+/*--------------------------------------- STM32F42xxx/STM32F43xxx--------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_SECTOR_TOTAL  24
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FLASH_SECTOR_TOTAL  12
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define FLASH_SECTOR_TOTAL  6
+#endif /* STM32F401xC */
+
+/*--------------------------------- STM32F401xE/STM32F411xE/STM32F446xx -------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define FLASH_SECTOR_TOTAL  8
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+
+/**
+  * @brief OPTCR1 register byte 2 (Bits[23:16]) base address
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OPTCR1_BYTE2_ADDRESS         ((uint32_t)0x40023C1A)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Macros FLASH Private Macros
+  * @{
+  */
+
+/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters
+  * @{
+  */
+
+#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \
+                                  ((VALUE) == FLASH_TYPEERASE_MASSERASE))
+
+#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \
+                               ((RANGE) == FLASH_VOLTAGE_RANGE_2) || \
+                               ((RANGE) == FLASH_VOLTAGE_RANGE_3) || \
+                               ((RANGE) == FLASH_VOLTAGE_RANGE_4))
+
+#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \
+                           ((VALUE) == OB_WRPSTATE_ENABLE))
+
+#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP|OPTIONBYTE_RDP|OPTIONBYTE_USER|OPTIONBYTE_BOR)))
+
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+                                ((LEVEL) == OB_RDP_LEVEL_1) ||\
+                                ((LEVEL) == OB_RDP_LEVEL_2))
+
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+
+#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
+                                ((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_PCROPSTATE(VALUE)(((VALUE) == OB_PCROP_STATE_DISABLE) || \
+                             ((VALUE) == OB_PCROP_STATE_ENABLE))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#define IS_OBEX(VALUE)(((VALUE) == OPTIONBYTE_PCROP) || \
+                       ((VALUE) == OPTIONBYTE_BOOTCONFIG))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_OBEX(VALUE)(((VALUE) == OPTIONBYTE_PCROP))
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0)  || \
+                                   ((LATENCY) == FLASH_LATENCY_1)  || \
+                                   ((LATENCY) == FLASH_LATENCY_2)  || \
+                                   ((LATENCY) == FLASH_LATENCY_3)  || \
+                                   ((LATENCY) == FLASH_LATENCY_4)  || \
+                                   ((LATENCY) == FLASH_LATENCY_5)  || \
+                                   ((LATENCY) == FLASH_LATENCY_6)  || \
+                                   ((LATENCY) == FLASH_LATENCY_7)  || \
+                                   ((LATENCY) == FLASH_LATENCY_8)  || \
+                                   ((LATENCY) == FLASH_LATENCY_9)  || \
+                                   ((LATENCY) == FLASH_LATENCY_10) || \
+                                   ((LATENCY) == FLASH_LATENCY_11) || \
+                                   ((LATENCY) == FLASH_LATENCY_12) || \
+                                   ((LATENCY) == FLASH_LATENCY_13) || \
+                                   ((LATENCY) == FLASH_LATENCY_14) || \
+                                   ((LATENCY) == FLASH_LATENCY_15))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0)  || \
+                                   ((LATENCY) == FLASH_LATENCY_1)  || \
+                                   ((LATENCY) == FLASH_LATENCY_2)  || \
+                                   ((LATENCY) == FLASH_LATENCY_3)  || \
+                                   ((LATENCY) == FLASH_LATENCY_4)  || \
+                                   ((LATENCY) == FLASH_LATENCY_5)  || \
+                                   ((LATENCY) == FLASH_LATENCY_6)  || \
+                                   ((LATENCY) == FLASH_LATENCY_7))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1)  || \
+                             ((BANK) == FLASH_BANK_2)  || \
+                             ((BANK) == FLASH_BANK_BOTH))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_FLASH_SECTOR(SECTOR) ( ((SECTOR) == FLASH_SECTOR_0)   || ((SECTOR) == FLASH_SECTOR_1)   ||\
+                                  ((SECTOR) == FLASH_SECTOR_2)   || ((SECTOR) == FLASH_SECTOR_3)   ||\
+                                  ((SECTOR) == FLASH_SECTOR_4)   || ((SECTOR) == FLASH_SECTOR_5)   ||\
+                                  ((SECTOR) == FLASH_SECTOR_6)   || ((SECTOR) == FLASH_SECTOR_7)   ||\
+                                  ((SECTOR) == FLASH_SECTOR_8)   || ((SECTOR) == FLASH_SECTOR_9)   ||\
+                                  ((SECTOR) == FLASH_SECTOR_10)  || ((SECTOR) == FLASH_SECTOR_11)  ||\
+                                  ((SECTOR) == FLASH_SECTOR_12)  || ((SECTOR) == FLASH_SECTOR_13)  ||\
+                                  ((SECTOR) == FLASH_SECTOR_14)  || ((SECTOR) == FLASH_SECTOR_15)  ||\
+                                  ((SECTOR) == FLASH_SECTOR_16)  || ((SECTOR) == FLASH_SECTOR_17)  ||\
+                                  ((SECTOR) == FLASH_SECTOR_18)  || ((SECTOR) == FLASH_SECTOR_19)  ||\
+                                  ((SECTOR) == FLASH_SECTOR_20)  || ((SECTOR) == FLASH_SECTOR_21)  ||\
+                                  ((SECTOR) == FLASH_SECTOR_22)  || ((SECTOR) == FLASH_SECTOR_23))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0)   || ((SECTOR) == FLASH_SECTOR_1)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_2)   || ((SECTOR) == FLASH_SECTOR_3)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_4)   || ((SECTOR) == FLASH_SECTOR_5)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_6)   || ((SECTOR) == FLASH_SECTOR_7)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_8)   || ((SECTOR) == FLASH_SECTOR_9)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_10)  || ((SECTOR) == FLASH_SECTOR_11))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F401xC)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0)   || ((SECTOR) == FLASH_SECTOR_1)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_2)   || ((SECTOR) == FLASH_SECTOR_3)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_4)   || ((SECTOR) == FLASH_SECTOR_5))
+#endif /* STM32F401xC */
+
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0)   || ((SECTOR) == FLASH_SECTOR_1)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_2)   || ((SECTOR) == FLASH_SECTOR_3)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_4)   || ((SECTOR) == FLASH_SECTOR_5)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_6)   || ((SECTOR) == FLASH_SECTOR_7))
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END))
+#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFF000000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F401xC)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xC */
+
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F401xC)
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xC */
+
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_OB_BOOT(BOOT) (((BOOT) == OB_DUAL_BOOT_ENABLE) || ((BOOT) == OB_DUAL_BOOT_DISABLE))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PCROP_SELECTED) || ((PCROP) == OB_PCROP_DESELECTED))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Functions FLASH Private Functions
+  * @{
+  */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h
new file mode 100644
index 0000000..93023ab
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h
@@ -0,0 +1,97 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash_ramfunc.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of FLASH RAMFUNC driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_FLASH_RAMFUNC_H
+#define __STM32F4xx_FLASH_RAMFUNC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F411xE) || defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASHRAMFUNC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHRAMFUNC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup FLASHRAMFUNC_Exported_Functions_Group1
+  * @{
+  */
+__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void);
+__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void);
+__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void);
+__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F411xE */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_FLASH_RAMFUNC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c.h
new file mode 100644
index 0000000..1db990f
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c.h
@@ -0,0 +1,577 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_fmpi2c.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of FMPI2C HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FMPI2C_H
+#define __STM32F4xx_HAL_FMPI2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FMPI2C
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FMPI2C_Exported_Types FMPI2C Exported Types
+  * @{
+  */
+
+/**
+  * @brief  FMPI2C Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Timing;              /*!< Specifies the FMPI2C_TIMINGR_register value.
+                                  This parameter calculated by referring to FMPI2C initialization
+                                         section in Reference manual */
+
+  uint32_t OwnAddress1;         /*!< Specifies the first device own address.
+                                  This parameter can be a 7-bit or 10-bit address. */
+
+  uint32_t AddressingMode;      /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+                                  This parameter can be a value of @ref FMPI2C_addressing_mode */
+
+  uint32_t DualAddressMode;     /*!< Specifies if dual addressing mode is selected.
+                                  This parameter can be a value of @ref FMPI2C_dual_addressing_mode */
+
+  uint32_t OwnAddress2;         /*!< Specifies the second device own address if dual addressing mode is selected
+                                  This parameter can be a 7-bit address. */
+
+  uint32_t OwnAddress2Masks;    /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
+                                  This parameter can be a value of @ref FMPI2C_own_address2_masks */
+
+  uint32_t GeneralCallMode;     /*!< Specifies if general call mode is selected.
+                                  This parameter can be a value of @ref FMPI2C_general_call_addressing_mode */
+
+  uint32_t NoStretchMode;       /*!< Specifies if nostretch mode is selected.
+                                  This parameter can be a value of @ref FMPI2C_nostretch_mode */
+
+}FMPI2C_InitTypeDef;
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_FMPI2C_STATE_RESET           = 0x00,  /*!< FMPI2C not yet initialized or disabled         */
+  HAL_FMPI2C_STATE_READY           = 0x01,  /*!< FMPI2C initialized and ready for use           */
+  HAL_FMPI2C_STATE_BUSY            = 0x02,  /*!< FMPI2C internal process is ongoing             */
+  HAL_FMPI2C_STATE_MASTER_BUSY_TX  = 0x12,  /*!< Master Data Transmission process is ongoing */
+  HAL_FMPI2C_STATE_MASTER_BUSY_RX  = 0x22,  /*!< Master Data Reception process is ongoing    */
+  HAL_FMPI2C_STATE_SLAVE_BUSY_TX   = 0x32,  /*!< Slave Data Transmission process is ongoing  */
+  HAL_FMPI2C_STATE_SLAVE_BUSY_RX   = 0x42,  /*!< Slave Data Reception process is ongoing     */
+  HAL_FMPI2C_STATE_MEM_BUSY_TX     = 0x52,  /*!< Memory Data Transmission process is ongoing */
+  HAL_FMPI2C_STATE_MEM_BUSY_RX     = 0x62,  /*!< Memory Data Reception process is ongoing    */
+  HAL_FMPI2C_STATE_TIMEOUT         = 0x03,  /*!< Timeout state                               */
+  HAL_FMPI2C_STATE_ERROR           = 0x04   /*!< Reception process is ongoing                */
+}HAL_FMPI2C_StateTypeDef;
+
+/**
+  * @brief  HAL FMPI2C Error Code structure definition
+  */
+typedef enum
+{
+  HAL_FMPI2C_ERROR_NONE      = 0x00,    /*!< No error              */
+  HAL_FMPI2C_ERROR_BERR      = 0x01,    /*!< BERR error            */
+  HAL_FMPI2C_ERROR_ARLO      = 0x02,    /*!< ARLO error            */
+  HAL_FMPI2C_ERROR_AF        = 0x04,    /*!< ACKF error            */
+  HAL_FMPI2C_ERROR_OVR       = 0x08,    /*!< OVR error             */
+  HAL_FMPI2C_ERROR_DMA       = 0x10,    /*!< DMA transfer error    */
+  HAL_FMPI2C_ERROR_TIMEOUT   = 0x20,    /*!< Timeout error         */
+  HAL_FMPI2C_ERROR_SIZE      = 0x40     /*!< Size Management error */
+}HAL_FMPI2C_ErrorTypeDef;
+
+/**
+  * @brief  FMPI2C handle Structure definition
+  */
+typedef struct
+{
+  FMPI2C_TypeDef                *Instance;  /*!< FMPI2C registers base address     */
+
+  FMPI2C_InitTypeDef            Init;       /*!< FMPI2C communication parameters   */
+
+  uint8_t                    *pBuffPtr;  /*!< Pointer to FMPI2C transfer buffer */
+
+  uint16_t                   XferSize;   /*!< FMPI2C transfer size              */
+
+  __IO uint16_t              XferCount;  /*!< FMPI2C transfer counter           */
+
+  DMA_HandleTypeDef          *hdmatx;    /*!< FMPI2C Tx DMA handle parameters   */
+
+  DMA_HandleTypeDef          *hdmarx;    /*!< FMPI2C Rx DMA handle parameters   */
+
+  HAL_LockTypeDef            Lock;       /*!< FMPI2C locking object             */
+
+  __IO HAL_FMPI2C_StateTypeDef  State;      /*!< FMPI2C communication state        */
+
+  __IO HAL_FMPI2C_ErrorTypeDef  ErrorCode;  /* FMPI2C Error code                   */
+
+}FMPI2C_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FMPI2C_Exported_Constants FMPI2C Exported Constants
+  * @{
+  */
+
+/** @defgroup FMPI2C_addressing_mode FMPI2C addressing mode
+  * @{
+  */
+#define FMPI2C_ADDRESSINGMODE_7BIT          ((uint32_t)0x00000001)
+#define FMPI2C_ADDRESSINGMODE_10BIT         ((uint32_t)0x00000002)
+
+/**
+  * @}
+  */
+
+/** @defgroup FMPI2C_dual_addressing_mode FMPI2C dual addressing mode
+  * @{
+  */
+
+#define FMPI2C_DUALADDRESS_DISABLE        ((uint32_t)0x00000000)
+#define FMPI2C_DUALADDRESS_ENABLE         FMPI2C_OAR2_OA2EN
+
+/**
+  * @}
+  */
+
+/** @defgroup FMPI2C_own_address2_masks FMPI2C own address2 masks
+  * @{
+  */
+
+#define FMPI2C_OA2_NOMASK                  ((uint8_t)0x00)
+#define FMPI2C_OA2_MASK01                  ((uint8_t)0x01)
+#define FMPI2C_OA2_MASK02                  ((uint8_t)0x02)
+#define FMPI2C_OA2_MASK03                  ((uint8_t)0x03)
+#define FMPI2C_OA2_MASK04                  ((uint8_t)0x04)
+#define FMPI2C_OA2_MASK05                  ((uint8_t)0x05)
+#define FMPI2C_OA2_MASK06                  ((uint8_t)0x06)
+#define FMPI2C_OA2_MASK07                  ((uint8_t)0x07)
+
+/**
+  * @}
+  */
+
+/** @defgroup FMPI2C_general_call_addressing_mode FMPI2C general call addressing mode
+  * @{
+  */
+#define FMPI2C_GENERALCALL_DISABLE        ((uint32_t)0x00000000)
+#define FMPI2C_GENERALCALL_ENABLE         FMPI2C_CR1_GCEN
+
+/**
+  * @}
+  */
+
+/** @defgroup FMPI2C_nostretch_mode FMPI2C nostretch mode
+  * @{
+  */
+#define FMPI2C_NOSTRETCH_DISABLE          ((uint32_t)0x00000000)
+#define FMPI2C_NOSTRETCH_ENABLE           FMPI2C_CR1_NOSTRETCH
+
+/**
+  * @}
+  */
+
+/** @defgroup FMPI2C_Memory_Address_Size FMPI2C Memory Address Size
+  * @{
+  */
+#define FMPI2C_MEMADD_SIZE_8BIT            ((uint32_t)0x00000001)
+#define FMPI2C_MEMADD_SIZE_16BIT           ((uint32_t)0x00000002)
+
+/**
+  * @}
+  */
+
+/** @defgroup FMPI2C_ReloadEndMode_definition FMPI2C ReloadEndMode definition
+  * @{
+  */
+
+#define  FMPI2C_RELOAD_MODE                FMPI2C_CR2_RELOAD
+#define  FMPI2C_AUTOEND_MODE               FMPI2C_CR2_AUTOEND
+#define  FMPI2C_SOFTEND_MODE               ((uint32_t)0x00000000)
+
+/**
+  * @}
+  */
+
+/** @defgroup FMPI2C_StartStopMode_definition FMPI2C StartStopMode definition
+  * @{
+  */
+
+#define  FMPI2C_NO_STARTSTOP                 ((uint32_t)0x00000000)
+#define  FMPI2C_GENERATE_STOP                FMPI2C_CR2_STOP
+#define  FMPI2C_GENERATE_START_READ          (uint32_t)(FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN)
+#define  FMPI2C_GENERATE_START_WRITE         FMPI2C_CR2_START
+
+/**
+  * @}
+  */
+
+/** @defgroup FMPI2C_Interrupt_configuration_definition FMPI2C Interrupt configuration definition
+  * @brief FMPI2C Interrupt definition
+  *        Elements values convention: 0xXXXXXXXX
+  *           - XXXXXXXX  : Interrupt control mask
+  * @{
+  */
+#define FMPI2C_IT_ERRI                       FMPI2C_CR1_ERRIE
+#define FMPI2C_IT_TCI                        FMPI2C_CR1_TCIE
+#define FMPI2C_IT_STOPI                      FMPI2C_CR1_STOPIE
+#define FMPI2C_IT_NACKI                      FMPI2C_CR1_NACKIE
+#define FMPI2C_IT_ADDRI                      FMPI2C_CR1_ADDRIE
+#define FMPI2C_IT_RXI                        FMPI2C_CR1_RXIE
+#define FMPI2C_IT_TXI                        FMPI2C_CR1_TXIE
+
+/**
+  * @}
+  */
+
+
+/** @defgroup FMPI2C_Flag_definition FMPI2C Flag definition
+  * @{
+  */
+
+#define FMPI2C_FLAG_TXE                      FMPI2C_ISR_TXE
+#define FMPI2C_FLAG_TXIS                     FMPI2C_ISR_TXIS
+#define FMPI2C_FLAG_RXNE                     FMPI2C_ISR_RXNE
+#define FMPI2C_FLAG_ADDR                     FMPI2C_ISR_ADDR
+#define FMPI2C_FLAG_AF                       FMPI2C_ISR_NACKF
+#define FMPI2C_FLAG_STOPF                    FMPI2C_ISR_STOPF
+#define FMPI2C_FLAG_TC                       FMPI2C_ISR_TC
+#define FMPI2C_FLAG_TCR                      FMPI2C_ISR_TCR
+#define FMPI2C_FLAG_BERR                     FMPI2C_ISR_BERR
+#define FMPI2C_FLAG_ARLO                     FMPI2C_ISR_ARLO
+#define FMPI2C_FLAG_OVR                      FMPI2C_ISR_OVR
+#define FMPI2C_FLAG_PECERR                   FMPI2C_ISR_PECERR
+#define FMPI2C_FLAG_TIMEOUT                  FMPI2C_ISR_TIMEOUT
+#define FMPI2C_FLAG_ALERT                    FMPI2C_ISR_ALERT
+#define FMPI2C_FLAG_BUSY                     FMPI2C_ISR_BUSY
+#define FMPI2C_FLAG_DIR                      FMPI2C_ISR_DIR
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FMPI2C_Exported_Macros FMPI2C Exported Macros
+  * @{
+  */
+
+/** @brief Reset FMPI2C handle state
+  * @param  __HANDLE__: specifies the FMPI2C Handle.
+  *         This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
+  * @retval None
+  */
+#define __HAL_FMPI2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FMPI2C_STATE_RESET)
+
+/** @brief  Enables or disables the specified FMPI2C interrupts.
+  * @param  __HANDLE__: specifies the FMPI2C Handle.
+  *         This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
+  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
+  *        This parameter can be one of the following values:
+  *            @arg FMPI2C_IT_ERRI: Errors interrupt enable
+  *            @arg FMPI2C_IT_TCI: Transfer complete interrupt enable
+  *            @arg FMPI2C_IT_STOPI: STOP detection interrupt enable
+  *            @arg FMPI2C_IT_NACKI: NACK received interrupt enable
+  *            @arg FMPI2C_IT_ADDRI: Address match interrupt enable
+  *            @arg FMPI2C_IT_RXI: RX interrupt enable
+  *            @arg FMPI2C_IT_TXI: TX interrupt enable
+  *
+  * @retval None
+  */
+
+#define __HAL_FMPI2C_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+#define __HAL_FMPI2C_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief  Checks if the specified FMPI2C interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the FMPI2C Handle.
+  *         This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
+  * @param  __INTERRUPT__: specifies the FMPI2C interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg FMPI2C_IT_ERRI: Errors interrupt enable
+  *            @arg FMPI2C_IT_TCI: Transfer complete interrupt enable
+  *            @arg FMPI2C_IT_STOPI: STOP detection interrupt enable
+  *            @arg FMPI2C_IT_NACKI: NACK received interrupt enable
+  *            @arg FMPI2C_IT_ADDRI: Address match interrupt enable
+  *            @arg FMPI2C_IT_RXI: RX interrupt enable
+  *            @arg FMPI2C_IT_TXI: TX interrupt enable
+  *
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_FMPI2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks whether the specified FMPI2C flag is set or not.
+  * @param  __HANDLE__: specifies the FMPI2C Handle.
+  *         This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg FMPI2C_FLAG_TXE:      Transmit data register empty
+  *            @arg FMPI2C_FLAG_TXIS:     Transmit interrupt status
+  *            @arg FMPI2C_FLAG_RXNE:     Receive data register not empty
+  *            @arg FMPI2C_FLAG_ADDR:     Address matched (slave mode)
+  *            @arg FMPI2C_FLAG_AF:       Acknowledge failure received flag
+  *            @arg FMPI2C_FLAG_STOPF:    STOP detection flag
+  *            @arg FMPI2C_FLAG_TC:       Transfer complete (master mode)
+  *            @arg FMPI2C_FLAG_TCR:      Transfer complete reload
+  *            @arg FMPI2C_FLAG_BERR:     Bus error
+  *            @arg FMPI2C_FLAG_ARLO:     Arbitration lost
+  *            @arg FMPI2C_FLAG_OVR:      Overrun/Underrun
+  *            @arg FMPI2C_FLAG_PECERR:   PEC error in reception
+  *            @arg FMPI2C_FLAG_TIMEOUT:  Timeout or Tlow detection flag
+  *            @arg FMPI2C_FLAG_ALERT:    SMBus alert
+  *            @arg FMPI2C_FLAG_BUSY:     Bus busy
+  *            @arg FMPI2C_FLAG_DIR:      Transfer direction (slave mode)
+  *
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_FMPI2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & FMPI2C_FLAG_MASK)) == ((__FLAG__) & FMPI2C_FLAG_MASK)))
+
+/** @brief  Clears the FMPI2C pending flags which are cleared by writing 1 in a specific bit.
+  * @param  __HANDLE__: specifies the FMPI2C Handle.
+  *         This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg FMPI2C_FLAG_ADDR:    Address matched (slave mode)
+  *            @arg FMPI2C_FLAG_AF:      Acknowledge failure received flag
+  *            @arg FMPI2C_FLAG_STOPF:   STOP detection flag
+  *            @arg FMPI2C_FLAG_BERR:    Bus error
+  *            @arg FMPI2C_FLAG_ARLO:    Arbitration lost
+  *            @arg FMPI2C_FLAG_OVR:     Overrun/Underrun
+  *            @arg FMPI2C_FLAG_PECERR:  PEC error in reception
+  *            @arg FMPI2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
+  *            @arg FMPI2C_FLAG_ALERT:   SMBus alert
+  *
+  * @retval None
+  */
+#define __HAL_FMPI2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = ((__FLAG__) & FMPI2C_FLAG_MASK))
+
+
+#define __HAL_FMPI2C_ENABLE(__HANDLE__)                            ((__HANDLE__)->Instance->CR1 |=  FMPI2C_CR1_PE)
+#define __HAL_FMPI2C_DISABLE(__HANDLE__)                           ((__HANDLE__)->Instance->CR1 &=  ~FMPI2C_CR1_PE)
+
+#define __HAL_FMPI2C_RESET_CR2(__HANDLE__)				((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_HEAD10R | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_RD_WRN)))
+
+#define __HAL_FMPI2C_MEM_ADD_MSB(__ADDRESS__)                       ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8)))
+#define __HAL_FMPI2C_MEM_ADD_LSB(__ADDRESS__)                       ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+
+#define __HAL_FMPI2C_GENERATE_START(__ADDMODE__,__ADDRESS__)       (((__ADDMODE__) == FMPI2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_START) | (FMPI2C_CR2_AUTOEND)) & (~FMPI2C_CR2_RD_WRN)) : \
+                                                                  (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_ADD10) | (FMPI2C_CR2_START)) & (~FMPI2C_CR2_RD_WRN)))
+
+#define IS_FMPI2C_OWN_ADDRESS1(ADDRESS1)   ((ADDRESS1) <= (uint32_t)0x000003FF)
+#define IS_FMPI2C_OWN_ADDRESS2(ADDRESS2)   ((ADDRESS2) <= (uint16_t)0x00FF)
+
+/**
+  * @}
+  */
+
+/* Include FMPI2C HAL Extension module */
+#include "stm32f4xx_hal_fmpi2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FMPI2C_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup FMPI2C_Exported_Functions_Group1
+  * @{
+  */
+
+/* Initialization/de-initialization functions**********************************/
+HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hFMPI2C);
+HAL_StatusTypeDef HAL_FMPI2C_DeInit (FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hFMPI2C);
+
+/**
+  * @}
+  */
+
+/** @addtogroup FMPI2C_Exported_Functions_Group2
+  * @{
+  */
+
+/* I/O operation functions  ***************************************************/
+ /******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+ /******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+ /******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+ /******* FMPI2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+/**
+  * @}
+  */
+
+/** @addtogroup FMPI2C_Exported_Functions_Group3
+  * @{
+  */
+
+/* Peripheral State functions  ************************************************/
+HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hFMPI2C);
+uint32_t             HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hFMPI2C);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FMPI2C_Private_Constants FMPI2C Private Constants
+  * @{
+  */
+#define FMPI2C_FLAG_MASK  ((uint32_t)0x0001FFFF)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FMPI2C_Private_Macros FMPI2C Private Macros
+  * @{
+  */
+
+#define IS_FMPI2C_ADDRESSING_MODE(MODE) (((MODE) == FMPI2C_ADDRESSINGMODE_7BIT) || \
+                                         ((MODE) == FMPI2C_ADDRESSINGMODE_10BIT))
+
+#define IS_FMPI2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == FMPI2C_DUALADDRESS_DISABLE) || \
+                                         ((ADDRESS) == FMPI2C_DUALADDRESS_ENABLE))
+
+#define IS_FMPI2C_OWN_ADDRESS2_MASK(MASK)  (((MASK) == FMPI2C_OA2_NOMASK) || \
+                                            ((MASK) == FMPI2C_OA2_MASK01) || \
+                                            ((MASK) == FMPI2C_OA2_MASK02) || \
+                                            ((MASK) == FMPI2C_OA2_MASK03) || \
+                                            ((MASK) == FMPI2C_OA2_MASK04) || \
+                                            ((MASK) == FMPI2C_OA2_MASK05) || \
+                                            ((MASK) == FMPI2C_OA2_MASK06) || \
+                                            ((MASK) == FMPI2C_OA2_MASK07))
+
+#define IS_FMPI2C_GENERAL_CALL(CALL) (((CALL) == FMPI2C_GENERALCALL_DISABLE) || \
+                                      ((CALL) == FMPI2C_GENERALCALL_ENABLE))
+
+#define IS_FMPI2C_NO_STRETCH(STRETCH) (((STRETCH) == FMPI2C_NOSTRETCH_DISABLE) || \
+                                       ((STRETCH) == FMPI2C_NOSTRETCH_ENABLE))
+
+#define IS_FMPI2C_MEMADD_SIZE(SIZE) (((SIZE) == FMPI2C_MEMADD_SIZE_8BIT) || \
+                                     ((SIZE) == FMPI2C_MEMADD_SIZE_16BIT))
+
+#define IS_TRANSFER_MODE(MODE)        (((MODE) == FMPI2C_RELOAD_MODE)  || \
+                                       ((MODE) == FMPI2C_AUTOEND_MODE) || \
+                                       ((MODE) == FMPI2C_SOFTEND_MODE))
+
+#define IS_TRANSFER_REQUEST(REQUEST)    (((REQUEST) == FMPI2C_GENERATE_STOP)        || \
+                                         ((REQUEST) == FMPI2C_GENERATE_START_READ)  || \
+                                         ((REQUEST) == FMPI2C_GENERATE_START_WRITE) || \
+                                         ((REQUEST) == FMPI2C_NO_STARTSTOP))
+
+/**
+  * @}
+  */
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FMPI2C_Private_Functions FMPI2C Private Functions
+  * @brief    FMPI2C private  functions
+  * @{
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F446xx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_FMPI2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c_ex.h
new file mode 100644
index 0000000..e2d604b
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c_ex.h
@@ -0,0 +1,151 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_fmpi2c_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of FMPI2C HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FMPI2C_EX_H
+#define __STM32F4xx_HAL_FMPI2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FMPI2CEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FMPI2CEx_Exported_Constants FMPI2C Exported Constants
+  * @{
+  */
+
+/** @defgroup FMPI2CEx_Analog_Filter FMPI2C Analog Filter
+  * @{
+  */
+#define FMPI2C_ANALOGFILTER_ENABLE        ((uint32_t)0x00000000)
+#define FMPI2C_ANALOGFILTER_DISABLE       FMPI2C_CR1_ANFOFF
+/**
+  * @}
+  */
+
+/** @defgroup FMPI2CEx_FastModePlus FMPI2C Fast Mode Plus
+  * @{
+  */
+#define FMPI2C_FASTMODEPLUS_SCL            SYSCFG_CFGR_FMPI2C1_SCL  /*!< Enable Fast Mode Plus on FMPI2C1 SCL pins       */
+#define FMPI2C_FASTMODEPLUS_SDA            SYSCFG_CFGR_FMPI2C1_SDA  /*!< Enable Fast Mode Plus on FMPI2C1 SDA pins       */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FMPI2CEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup FMPI2CEx_Exported_Functions_Group1
+  * @{
+  */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_FMPI2CEx_AnalogFilter_Config(FMPI2C_HandleTypeDef *hFMPI2C, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_FMPI2CEx_DigitalFilter_Config(FMPI2C_HandleTypeDef *hFMPI2C, uint32_t DigitalFilter);
+HAL_StatusTypeDef HAL_FMPI2CEx_EnableWakeUp (FMPI2C_HandleTypeDef *hFMPI2C);
+HAL_StatusTypeDef HAL_FMPI2CEx_DisableWakeUp (FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macros I2C Private Macros
+  * @{
+  */
+#define IS_FMPI2C_ANALOG_FILTER(FILTER) (((FILTER) == FMPI2C_ANALOGFILTER_ENABLE) || \
+                                         ((FILTER) == FMPI2C_ANALOGFILTER_DISABLE))
+
+#define IS_FMPI2C_DIGITAL_FILTER(FILTER)   ((FILTER) <= 0x0000000F)
+
+#define IS_FMPI2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & (FMPI2C_FASTMODEPLUS_SCL)) == FMPI2C_FASTMODEPLUS_SCL) || \
+                                          (((__CONFIG__) & (FMPI2C_FASTMODEPLUS_SDA)) == FMPI2C_FASTMODEPLUS_SDA))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F446xx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FMPI2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h
new file mode 100644
index 0000000..0b98239
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h
@@ -0,0 +1,327 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_gpio.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of GPIO HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_H
+#define __STM32F4xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup GPIO
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+  * @{
+  */
+
+/**
+  * @brief GPIO Init structure definition
+  */
+typedef struct
+{
+  uint32_t Pin;       /*!< Specifies the GPIO pins to be configured.
+                           This parameter can be any value of @ref GPIO_pins_define */
+
+  uint32_t Mode;      /*!< Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref GPIO_mode_define */
+
+  uint32_t Pull;      /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+                           This parameter can be a value of @ref GPIO_pull_define */
+
+  uint32_t Speed;     /*!< Specifies the speed for the selected pins.
+                           This parameter can be a value of @ref GPIO_speed_define */
+
+  uint32_t Alternate;  /*!< Peripheral to be connected to the selected pins.
+                            This parameter can be a value of @ref GPIO_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+  * @brief  GPIO Bit SET and Bit RESET enumeration
+  */
+typedef enum
+{
+  GPIO_PIN_RESET = 0,
+  GPIO_PIN_SET
+}GPIO_PinState;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+  * @{
+  */
+
+/** @defgroup GPIO_pins_define GPIO pins define
+  * @{
+  */
+#define GPIO_PIN_0                 ((uint16_t)0x0001)  /* Pin 0 selected    */
+#define GPIO_PIN_1                 ((uint16_t)0x0002)  /* Pin 1 selected    */
+#define GPIO_PIN_2                 ((uint16_t)0x0004)  /* Pin 2 selected    */
+#define GPIO_PIN_3                 ((uint16_t)0x0008)  /* Pin 3 selected    */
+#define GPIO_PIN_4                 ((uint16_t)0x0010)  /* Pin 4 selected    */
+#define GPIO_PIN_5                 ((uint16_t)0x0020)  /* Pin 5 selected    */
+#define GPIO_PIN_6                 ((uint16_t)0x0040)  /* Pin 6 selected    */
+#define GPIO_PIN_7                 ((uint16_t)0x0080)  /* Pin 7 selected    */
+#define GPIO_PIN_8                 ((uint16_t)0x0100)  /* Pin 8 selected    */
+#define GPIO_PIN_9                 ((uint16_t)0x0200)  /* Pin 9 selected    */
+#define GPIO_PIN_10                ((uint16_t)0x0400)  /* Pin 10 selected   */
+#define GPIO_PIN_11                ((uint16_t)0x0800)  /* Pin 11 selected   */
+#define GPIO_PIN_12                ((uint16_t)0x1000)  /* Pin 12 selected   */
+#define GPIO_PIN_13                ((uint16_t)0x2000)  /* Pin 13 selected   */
+#define GPIO_PIN_14                ((uint16_t)0x4000)  /* Pin 14 selected   */
+#define GPIO_PIN_15                ((uint16_t)0x8000)  /* Pin 15 selected   */
+#define GPIO_PIN_All               ((uint16_t)0xFFFF)  /* All pins selected */
+
+#define GPIO_PIN_MASK              ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_mode_define GPIO mode define
+  * @brief GPIO Configuration Mode
+  *        Elements values convention: 0xX0yz00YZ
+  *           - X  : GPIO mode or EXTI Mode
+  *           - y  : External IT or Event trigger detection
+  *           - z  : IO configuration on External IT or Event
+  *           - Y  : Output type (Push Pull or Open Drain)
+  *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
+  * @{
+  */
+#define  GPIO_MODE_INPUT                        ((uint32_t)0x00000000)   /*!< Input Floating Mode                   */
+#define  GPIO_MODE_OUTPUT_PP                    ((uint32_t)0x00000001)   /*!< Output Push Pull Mode                 */
+#define  GPIO_MODE_OUTPUT_OD                    ((uint32_t)0x00000011)   /*!< Output Open Drain Mode                */
+#define  GPIO_MODE_AF_PP                        ((uint32_t)0x00000002)   /*!< Alternate Function Push Pull Mode     */
+#define  GPIO_MODE_AF_OD                        ((uint32_t)0x00000012)   /*!< Alternate Function Open Drain Mode    */
+
+#define  GPIO_MODE_ANALOG                       ((uint32_t)0x00000003)   /*!< Analog Mode  */
+
+#define  GPIO_MODE_IT_RISING                    ((uint32_t)0x10110000)   /*!< External Interrupt Mode with Rising edge trigger detection          */
+#define  GPIO_MODE_IT_FALLING                   ((uint32_t)0x10210000)   /*!< External Interrupt Mode with Falling edge trigger detection         */
+#define  GPIO_MODE_IT_RISING_FALLING            ((uint32_t)0x10310000)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
+
+#define  GPIO_MODE_EVT_RISING                   ((uint32_t)0x10120000)   /*!< External Event Mode with Rising edge trigger detection               */
+#define  GPIO_MODE_EVT_FALLING                  ((uint32_t)0x10220000)   /*!< External Event Mode with Falling edge trigger detection              */
+#define  GPIO_MODE_EVT_RISING_FALLING           ((uint32_t)0x10320000)   /*!< External Event Mode with Rising/Falling edge trigger detection       */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_speed_define  GPIO speed define
+  * @brief GPIO Output Maximum frequency
+  * @{
+  */
+#define  GPIO_SPEED_LOW         ((uint32_t)0x00000000)  /*!< Low speed     */
+#define  GPIO_SPEED_MEDIUM      ((uint32_t)0x00000001)  /*!< Medium speed  */
+#define  GPIO_SPEED_FAST        ((uint32_t)0x00000002)  /*!< Fast speed    */
+#define  GPIO_SPEED_HIGH        ((uint32_t)0x00000003)  /*!< High speed    */
+/**
+  * @}
+  */
+
+ /** @defgroup GPIO_pull_define GPIO pull define
+   * @brief GPIO Pull-Up or Pull-Down Activation
+   * @{
+   */
+#define  GPIO_NOPULL        ((uint32_t)0x00000000)   /*!< No Pull-up or Pull-down activation  */
+#define  GPIO_PULLUP        ((uint32_t)0x00000001)   /*!< Pull-up activation                  */
+#define  GPIO_PULLDOWN      ((uint32_t)0x00000002)   /*!< Pull-down activation                */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Checks whether the specified EXTI line flag is set or not.
+  * @param  __EXTI_LINE__: specifies the EXTI line flag to check.
+  *         This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending flags.
+  * @param  __EXTI_LINE__: specifies the EXTI lines flags to clear.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+  * @brief  Checks whether the specified EXTI line is asserted or not.
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending bits.
+  * @param  __EXTI_LINE__: specifies the EXTI lines to clear.
+  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+  * @brief  Generates a Software interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+/**
+  * @}
+  */
+
+/* Include GPIO HAL Extension module */
+#include "stm32f4xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void  HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void  HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);
+/**
+  * @}
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+  * @{
+  */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+#define IS_GPIO_PIN(PIN)           (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00)
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT)              ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_PP)          ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_OD)          ||\
+                            ((MODE) == GPIO_MODE_AF_PP)              ||\
+                            ((MODE) == GPIO_MODE_AF_OD)              ||\
+                            ((MODE) == GPIO_MODE_IT_RISING)          ||\
+                            ((MODE) == GPIO_MODE_IT_FALLING)         ||\
+                            ((MODE) == GPIO_MODE_IT_RISING_FALLING)  ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING)         ||\
+                            ((MODE) == GPIO_MODE_EVT_FALLING)        ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+                            ((MODE) == GPIO_MODE_ANALOG))
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW)  || ((SPEED) == GPIO_SPEED_MEDIUM) || \
+                              ((SPEED) == GPIO_SPEED_FAST) || ((SPEED) == GPIO_SPEED_HIGH))
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+                            ((PULL) == GPIO_PULLDOWN))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Functions GPIO Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h
new file mode 100644
index 0000000..1ca1dcb
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h
@@ -0,0 +1,1100 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_gpio_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of GPIO HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_EX_H
+#define __STM32F4xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup GPIOEx GPIOEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
+  * @{
+  */
+
+/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
+  * @{
+  */
+
+/*------------------------------------------ STM32F429xx/STM32F439xx --------------------------------------*/
+#if defined (STM32F429xx) || defined (STM32F439xx)
+/**
+  * @brief   AF 0 selection
+  */
+#define GPIO_AF0_RTC_50Hz      ((uint8_t)0x00)  /* RTC_50Hz Alternate Function mapping                       */
+#define GPIO_AF0_MCO           ((uint8_t)0x00)  /* MCO (MCO1 and MCO2) Alternate Function mapping            */
+#define GPIO_AF0_TAMPER        ((uint8_t)0x00)  /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ           ((uint8_t)0x00)  /* SWJ (SWD and JTAG) Alternate Function mapping             */
+#define GPIO_AF0_TRACE         ((uint8_t)0x00)  /* TRACE Alternate Function mapping                          */
+
+/**
+  * @brief   AF 1 selection
+  */
+#define GPIO_AF1_TIM1          ((uint8_t)0x01)  /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2          ((uint8_t)0x01)  /* TIM2 Alternate Function mapping */
+
+/**
+  * @brief   AF 2 selection
+  */
+#define GPIO_AF2_TIM3          ((uint8_t)0x02)  /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4          ((uint8_t)0x02)  /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5          ((uint8_t)0x02)  /* TIM5 Alternate Function mapping */
+
+/**
+  * @brief   AF 3 selection
+  */
+#define GPIO_AF3_TIM8          ((uint8_t)0x03)  /* TIM8 Alternate Function mapping  */
+#define GPIO_AF3_TIM9          ((uint8_t)0x03)  /* TIM9 Alternate Function mapping  */
+#define GPIO_AF3_TIM10         ((uint8_t)0x03)  /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11         ((uint8_t)0x03)  /* TIM11 Alternate Function mapping */
+
+/**
+  * @brief   AF 4 selection
+  */
+#define GPIO_AF4_I2C1          ((uint8_t)0x04)  /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2          ((uint8_t)0x04)  /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3          ((uint8_t)0x04)  /* I2C3 Alternate Function mapping */
+
+/**
+  * @brief   AF 5 selection
+  */
+#define GPIO_AF5_SPI1          ((uint8_t)0x05)  /* SPI1 Alternate Function mapping        */
+#define GPIO_AF5_SPI2          ((uint8_t)0x05)  /* SPI2/I2S2 Alternate Function mapping   */
+#define GPIO_AF5_SPI3          ((uint8_t)0x05)  /* SPI3/I2S3 Alternate Function mapping   */
+#define GPIO_AF5_SPI4          ((uint8_t)0x05)  /* SPI4 Alternate Function mapping        */
+#define GPIO_AF5_SPI5          ((uint8_t)0x05)  /* SPI5 Alternate Function mapping        */
+#define GPIO_AF5_SPI6          ((uint8_t)0x05)  /* SPI6 Alternate Function mapping        */
+#define GPIO_AF5_I2S3ext       ((uint8_t)0x05)  /* I2S3ext_SD Alternate Function mapping  */
+
+/**
+  * @brief   AF 6 selection
+  */
+#define GPIO_AF6_SPI3          ((uint8_t)0x06)  /* SPI3/I2S3 Alternate Function mapping  */
+#define GPIO_AF6_I2S2ext       ((uint8_t)0x06)  /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1          ((uint8_t)0x06)  /* SAI1 Alternate Function mapping       */
+
+/**
+  * @brief   AF 7 selection
+  */
+#define GPIO_AF7_USART1        ((uint8_t)0x07)  /* USART1 Alternate Function mapping     */
+#define GPIO_AF7_USART2        ((uint8_t)0x07)  /* USART2 Alternate Function mapping     */
+#define GPIO_AF7_USART3        ((uint8_t)0x07)  /* USART3 Alternate Function mapping     */
+#define GPIO_AF7_I2S3ext       ((uint8_t)0x07)  /* I2S3ext_SD Alternate Function mapping */
+
+/**
+  * @brief   AF 8 selection
+  */
+#define GPIO_AF8_UART4         ((uint8_t)0x08)  /* UART4 Alternate Function mapping  */
+#define GPIO_AF8_UART5         ((uint8_t)0x08)  /* UART5 Alternate Function mapping  */
+#define GPIO_AF8_USART6        ((uint8_t)0x08)  /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7         ((uint8_t)0x08)  /* UART7 Alternate Function mapping  */
+#define GPIO_AF8_UART8         ((uint8_t)0x08)  /* UART8 Alternate Function mapping  */
+
+/**
+  * @brief   AF 9 selection
+  */
+#define GPIO_AF9_CAN1          ((uint8_t)0x09)  /* CAN1 Alternate Function mapping    */
+#define GPIO_AF9_CAN2          ((uint8_t)0x09)  /* CAN2 Alternate Function mapping    */
+#define GPIO_AF9_TIM12         ((uint8_t)0x09)  /* TIM12 Alternate Function mapping   */
+#define GPIO_AF9_TIM13         ((uint8_t)0x09)  /* TIM13 Alternate Function mapping   */
+#define GPIO_AF9_TIM14         ((uint8_t)0x09)  /* TIM14 Alternate Function mapping   */
+#define GPIO_AF9_LTDC          ((uint8_t)0x09)  /* LCD-TFT Alternate Function mapping */
+
+/**
+  * @brief   AF 10 selection
+  */
+#define GPIO_AF10_OTG_FS        ((uint8_t)0xA)  /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS        ((uint8_t)0xA)  /* OTG_HS Alternate Function mapping */
+
+/**
+  * @brief   AF 11 selection
+  */
+#define GPIO_AF11_ETH           ((uint8_t)0x0B)  /* ETHERNET Alternate Function mapping */
+
+/**
+  * @brief   AF 12 selection
+  */
+#define GPIO_AF12_FMC           ((uint8_t)0xC)  /* FMC Alternate Function mapping                      */
+#define GPIO_AF12_OTG_HS_FS     ((uint8_t)0xC)  /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO          ((uint8_t)0xC)  /* SDIO Alternate Function mapping                     */
+
+/**
+  * @brief   AF 13 selection
+  */
+#define GPIO_AF13_DCMI          ((uint8_t)0x0D)  /* DCMI Alternate Function mapping */
+
+/**
+  * @brief   AF 14 selection
+  */
+#define GPIO_AF14_LTDC          ((uint8_t)0x0E)  /* LCD-TFT Alternate Function mapping */
+
+/**
+  * @brief   AF 15 selection
+  */
+#define GPIO_AF15_EVENTOUT      ((uint8_t)0x0F)  /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F429xx || STM32F439xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F427xx/STM32F437xx--------------------------------*/
+#if defined (STM32F427xx) || defined (STM32F437xx)
+/**
+  * @brief   AF 0 selection
+  */
+#define GPIO_AF0_RTC_50Hz      ((uint8_t)0x00)  /* RTC_50Hz Alternate Function mapping                       */
+#define GPIO_AF0_MCO           ((uint8_t)0x00)  /* MCO (MCO1 and MCO2) Alternate Function mapping            */
+#define GPIO_AF0_TAMPER        ((uint8_t)0x00)  /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ           ((uint8_t)0x00)  /* SWJ (SWD and JTAG) Alternate Function mapping             */
+#define GPIO_AF0_TRACE         ((uint8_t)0x00)  /* TRACE Alternate Function mapping                          */
+
+/**
+  * @brief   AF 1 selection
+  */
+#define GPIO_AF1_TIM1          ((uint8_t)0x01)  /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2          ((uint8_t)0x01)  /* TIM2 Alternate Function mapping */
+
+/**
+  * @brief   AF 2 selection
+  */
+#define GPIO_AF2_TIM3          ((uint8_t)0x02)  /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4          ((uint8_t)0x02)  /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5          ((uint8_t)0x02)  /* TIM5 Alternate Function mapping */
+
+/**
+  * @brief   AF 3 selection
+  */
+#define GPIO_AF3_TIM8          ((uint8_t)0x03)  /* TIM8 Alternate Function mapping  */
+#define GPIO_AF3_TIM9          ((uint8_t)0x03)  /* TIM9 Alternate Function mapping  */
+#define GPIO_AF3_TIM10         ((uint8_t)0x03)  /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11         ((uint8_t)0x03)  /* TIM11 Alternate Function mapping */
+
+/**
+  * @brief   AF 4 selection
+  */
+#define GPIO_AF4_I2C1          ((uint8_t)0x04)  /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2          ((uint8_t)0x04)  /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3          ((uint8_t)0x04)  /* I2C3 Alternate Function mapping */
+
+/**
+  * @brief   AF 5 selection
+  */
+#define GPIO_AF5_SPI1          ((uint8_t)0x05)  /* SPI1 Alternate Function mapping        */
+#define GPIO_AF5_SPI2          ((uint8_t)0x05)  /* SPI2/I2S2 Alternate Function mapping   */
+#define GPIO_AF5_SPI3          ((uint8_t)0x05)  /* SPI3/I2S3 Alternate Function mapping   */
+#define GPIO_AF5_SPI4          ((uint8_t)0x05)  /* SPI4 Alternate Function mapping        */
+#define GPIO_AF5_SPI5          ((uint8_t)0x05)  /* SPI5 Alternate Function mapping        */
+#define GPIO_AF5_SPI6          ((uint8_t)0x05)  /* SPI6 Alternate Function mapping        */
+/** @brief  GPIO_Legacy
+  */
+#define GPIO_AF5_I2S3ext       GPIO_AF5_SPI3    /* I2S3ext_SD Alternate Function mapping  */
+
+/**
+  * @brief   AF 6 selection
+  */
+#define GPIO_AF6_SPI3          ((uint8_t)0x06)  /* SPI3/I2S3 Alternate Function mapping  */
+#define GPIO_AF6_I2S2ext       ((uint8_t)0x06)  /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1          ((uint8_t)0x06)  /* SAI1 Alternate Function mapping       */
+
+/**
+  * @brief   AF 7 selection
+  */
+#define GPIO_AF7_USART1        ((uint8_t)0x07)  /* USART1 Alternate Function mapping     */
+#define GPIO_AF7_USART2        ((uint8_t)0x07)  /* USART2 Alternate Function mapping     */
+#define GPIO_AF7_USART3        ((uint8_t)0x07)  /* USART3 Alternate Function mapping     */
+#define GPIO_AF7_I2S3ext       ((uint8_t)0x07)  /* I2S3ext_SD Alternate Function mapping */
+
+/**
+  * @brief   AF 8 selection
+  */
+#define GPIO_AF8_UART4         ((uint8_t)0x08)  /* UART4 Alternate Function mapping  */
+#define GPIO_AF8_UART5         ((uint8_t)0x08)  /* UART5 Alternate Function mapping  */
+#define GPIO_AF8_USART6        ((uint8_t)0x08)  /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7         ((uint8_t)0x08)  /* UART7 Alternate Function mapping  */
+#define GPIO_AF8_UART8         ((uint8_t)0x08)  /* UART8 Alternate Function mapping  */
+
+/**
+  * @brief   AF 9 selection
+  */
+#define GPIO_AF9_CAN1          ((uint8_t)0x09)  /* CAN1 Alternate Function mapping  */
+#define GPIO_AF9_CAN2          ((uint8_t)0x09)  /* CAN2 Alternate Function mapping  */
+#define GPIO_AF9_TIM12         ((uint8_t)0x09)  /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13         ((uint8_t)0x09)  /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14         ((uint8_t)0x09)  /* TIM14 Alternate Function mapping */
+
+/**
+  * @brief   AF 10 selection
+  */
+#define GPIO_AF10_OTG_FS        ((uint8_t)0xA)  /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS        ((uint8_t)0xA)  /* OTG_HS Alternate Function mapping */
+
+/**
+  * @brief   AF 11 selection
+  */
+#define GPIO_AF11_ETH           ((uint8_t)0x0B)  /* ETHERNET Alternate Function mapping */
+
+/**
+  * @brief   AF 12 selection
+  */
+#define GPIO_AF12_FMC           ((uint8_t)0xC)  /* FMC Alternate Function mapping                      */
+#define GPIO_AF12_OTG_HS_FS     ((uint8_t)0xC)  /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO          ((uint8_t)0xC)  /* SDIO Alternate Function mapping                     */
+
+/**
+  * @brief   AF 13 selection
+  */
+#define GPIO_AF13_DCMI          ((uint8_t)0x0D)  /* DCMI Alternate Function mapping */
+
+/**
+  * @brief   AF 15 selection
+  */
+#define GPIO_AF15_EVENTOUT      ((uint8_t)0x0F)  /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F427xx || STM32F437xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F407xx/STM32F417xx--------------------------------*/
+#if defined (STM32F407xx) || defined (STM32F417xx)
+/**
+  * @brief   AF 0 selection
+  */
+#define GPIO_AF0_RTC_50Hz      ((uint8_t)0x00)  /* RTC_50Hz Alternate Function mapping                       */
+#define GPIO_AF0_MCO           ((uint8_t)0x00)  /* MCO (MCO1 and MCO2) Alternate Function mapping            */
+#define GPIO_AF0_TAMPER        ((uint8_t)0x00)  /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ           ((uint8_t)0x00)  /* SWJ (SWD and JTAG) Alternate Function mapping             */
+#define GPIO_AF0_TRACE         ((uint8_t)0x00)  /* TRACE Alternate Function mapping                          */
+
+/**
+  * @brief   AF 1 selection
+  */
+#define GPIO_AF1_TIM1          ((uint8_t)0x01)  /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2          ((uint8_t)0x01)  /* TIM2 Alternate Function mapping */
+
+/**
+  * @brief   AF 2 selection
+  */
+#define GPIO_AF2_TIM3          ((uint8_t)0x02)  /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4          ((uint8_t)0x02)  /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5          ((uint8_t)0x02)  /* TIM5 Alternate Function mapping */
+
+/**
+  * @brief   AF 3 selection
+  */
+#define GPIO_AF3_TIM8          ((uint8_t)0x03)  /* TIM8 Alternate Function mapping  */
+#define GPIO_AF3_TIM9          ((uint8_t)0x03)  /* TIM9 Alternate Function mapping  */
+#define GPIO_AF3_TIM10         ((uint8_t)0x03)  /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11         ((uint8_t)0x03)  /* TIM11 Alternate Function mapping */
+
+/**
+  * @brief   AF 4 selection
+  */
+#define GPIO_AF4_I2C1          ((uint8_t)0x04)  /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2          ((uint8_t)0x04)  /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3          ((uint8_t)0x04)  /* I2C3 Alternate Function mapping */
+
+/**
+  * @brief   AF 5 selection
+  */
+#define GPIO_AF5_SPI1          ((uint8_t)0x05)  /* SPI1 Alternate Function mapping        */
+#define GPIO_AF5_SPI2          ((uint8_t)0x05)  /* SPI2/I2S2 Alternate Function mapping   */
+#define GPIO_AF5_I2S3ext       ((uint8_t)0x05)  /* I2S3ext_SD Alternate Function mapping  */
+
+/**
+  * @brief   AF 6 selection
+  */
+#define GPIO_AF6_SPI3          ((uint8_t)0x06)  /* SPI3/I2S3 Alternate Function mapping  */
+#define GPIO_AF6_I2S2ext       ((uint8_t)0x06)  /* I2S2ext_SD Alternate Function mapping */
+
+/**
+  * @brief   AF 7 selection
+  */
+#define GPIO_AF7_USART1        ((uint8_t)0x07)  /* USART1 Alternate Function mapping     */
+#define GPIO_AF7_USART2        ((uint8_t)0x07)  /* USART2 Alternate Function mapping     */
+#define GPIO_AF7_USART3        ((uint8_t)0x07)  /* USART3 Alternate Function mapping     */
+#define GPIO_AF7_I2S3ext       ((uint8_t)0x07)  /* I2S3ext_SD Alternate Function mapping */
+
+/**
+  * @brief   AF 8 selection
+  */
+#define GPIO_AF8_UART4         ((uint8_t)0x08)  /* UART4 Alternate Function mapping  */
+#define GPIO_AF8_UART5         ((uint8_t)0x08)  /* UART5 Alternate Function mapping  */
+#define GPIO_AF8_USART6        ((uint8_t)0x08)  /* USART6 Alternate Function mapping */
+
+/**
+  * @brief   AF 9 selection
+  */
+#define GPIO_AF9_CAN1          ((uint8_t)0x09)  /* CAN1 Alternate Function mapping  */
+#define GPIO_AF9_CAN2          ((uint8_t)0x09)  /* CAN2 Alternate Function mapping  */
+#define GPIO_AF9_TIM12         ((uint8_t)0x09)  /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13         ((uint8_t)0x09)  /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14         ((uint8_t)0x09)  /* TIM14 Alternate Function mapping */
+
+/**
+  * @brief   AF 10 selection
+  */
+#define GPIO_AF10_OTG_FS        ((uint8_t)0xA)  /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS        ((uint8_t)0xA)  /* OTG_HS Alternate Function mapping */
+
+/**
+  * @brief   AF 11 selection
+  */
+#define GPIO_AF11_ETH           ((uint8_t)0x0B)  /* ETHERNET Alternate Function mapping */
+
+/**
+  * @brief   AF 12 selection
+  */
+#define GPIO_AF12_FSMC          ((uint8_t)0xC)  /* FSMC Alternate Function mapping                     */
+#define GPIO_AF12_OTG_HS_FS     ((uint8_t)0xC)  /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO          ((uint8_t)0xC)  /* SDIO Alternate Function mapping                     */
+
+/**
+  * @brief   AF 13 selection
+  */
+#define GPIO_AF13_DCMI          ((uint8_t)0x0D)  /* DCMI Alternate Function mapping */
+
+/**
+  * @brief   AF 15 selection
+  */
+#define GPIO_AF15_EVENTOUT      ((uint8_t)0x0F)  /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F407xx || STM32F417xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F405xx/STM32F415xx--------------------------------*/
+#if defined (STM32F405xx) || defined (STM32F415xx)
+/**
+  * @brief   AF 0 selection
+  */
+#define GPIO_AF0_RTC_50Hz      ((uint8_t)0x00)  /* RTC_50Hz Alternate Function mapping                       */
+#define GPIO_AF0_MCO           ((uint8_t)0x00)  /* MCO (MCO1 and MCO2) Alternate Function mapping            */
+#define GPIO_AF0_TAMPER        ((uint8_t)0x00)  /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ           ((uint8_t)0x00)  /* SWJ (SWD and JTAG) Alternate Function mapping             */
+#define GPIO_AF0_TRACE         ((uint8_t)0x00)  /* TRACE Alternate Function mapping                          */
+
+/**
+  * @brief   AF 1 selection
+  */
+#define GPIO_AF1_TIM1          ((uint8_t)0x01)  /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2          ((uint8_t)0x01)  /* TIM2 Alternate Function mapping */
+
+/**
+  * @brief   AF 2 selection
+  */
+#define GPIO_AF2_TIM3          ((uint8_t)0x02)  /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4          ((uint8_t)0x02)  /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5          ((uint8_t)0x02)  /* TIM5 Alternate Function mapping */
+
+/**
+  * @brief   AF 3 selection
+  */
+#define GPIO_AF3_TIM8          ((uint8_t)0x03)  /* TIM8 Alternate Function mapping  */
+#define GPIO_AF3_TIM9          ((uint8_t)0x03)  /* TIM9 Alternate Function mapping  */
+#define GPIO_AF3_TIM10         ((uint8_t)0x03)  /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11         ((uint8_t)0x03)  /* TIM11 Alternate Function mapping */
+
+/**
+  * @brief   AF 4 selection
+  */
+#define GPIO_AF4_I2C1          ((uint8_t)0x04)  /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2          ((uint8_t)0x04)  /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3          ((uint8_t)0x04)  /* I2C3 Alternate Function mapping */
+
+/**
+  * @brief   AF 5 selection
+  */
+#define GPIO_AF5_SPI1          ((uint8_t)0x05)  /* SPI1 Alternate Function mapping        */
+#define GPIO_AF5_SPI2          ((uint8_t)0x05)  /* SPI2/I2S2 Alternate Function mapping   */
+#define GPIO_AF5_I2S3ext       ((uint8_t)0x05)  /* I2S3ext_SD Alternate Function mapping  */
+
+/**
+  * @brief   AF 6 selection
+  */
+#define GPIO_AF6_SPI3          ((uint8_t)0x06)  /* SPI3/I2S3 Alternate Function mapping  */
+#define GPIO_AF6_I2S2ext       ((uint8_t)0x06)  /* I2S2ext_SD Alternate Function mapping */
+
+/**
+  * @brief   AF 7 selection
+  */
+#define GPIO_AF7_USART1        ((uint8_t)0x07)  /* USART1 Alternate Function mapping     */
+#define GPIO_AF7_USART2        ((uint8_t)0x07)  /* USART2 Alternate Function mapping     */
+#define GPIO_AF7_USART3        ((uint8_t)0x07)  /* USART3 Alternate Function mapping     */
+#define GPIO_AF7_I2S3ext       ((uint8_t)0x07)  /* I2S3ext_SD Alternate Function mapping */
+
+/**
+  * @brief   AF 8 selection
+  */
+#define GPIO_AF8_UART4         ((uint8_t)0x08)  /* UART4 Alternate Function mapping  */
+#define GPIO_AF8_UART5         ((uint8_t)0x08)  /* UART5 Alternate Function mapping  */
+#define GPIO_AF8_USART6        ((uint8_t)0x08)  /* USART6 Alternate Function mapping */
+
+/**
+  * @brief   AF 9 selection
+  */
+#define GPIO_AF9_CAN1          ((uint8_t)0x09)  /* CAN1 Alternate Function mapping  */
+#define GPIO_AF9_CAN2          ((uint8_t)0x09)  /* CAN2 Alternate Function mapping  */
+#define GPIO_AF9_TIM12         ((uint8_t)0x09)  /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13         ((uint8_t)0x09)  /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14         ((uint8_t)0x09)  /* TIM14 Alternate Function mapping */
+
+/**
+  * @brief   AF 10 selection
+  */
+#define GPIO_AF10_OTG_FS        ((uint8_t)0xA)  /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS        ((uint8_t)0xA)  /* OTG_HS Alternate Function mapping */
+
+/**
+  * @brief   AF 12 selection
+  */
+#define GPIO_AF12_FSMC          ((uint8_t)0xC)  /* FSMC Alternate Function mapping                     */
+#define GPIO_AF12_OTG_HS_FS     ((uint8_t)0xC)  /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO          ((uint8_t)0xC)  /* SDIO Alternate Function mapping                     */
+
+/**
+  * @brief   AF 15 selection
+  */
+#define GPIO_AF15_EVENTOUT      ((uint8_t)0x0F)  /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F405xx || STM32F415xx */
+
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F401xx--------------------------------------*/
+#if defined(STM32F401xC) || defined(STM32F401xE)
+/**
+  * @brief   AF 0 selection
+  */
+#define GPIO_AF0_RTC_50Hz      ((uint8_t)0x00)  /* RTC_50Hz Alternate Function mapping                       */
+#define GPIO_AF0_MCO           ((uint8_t)0x00)  /* MCO (MCO1 and MCO2) Alternate Function mapping            */
+#define GPIO_AF0_TAMPER        ((uint8_t)0x00)  /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ           ((uint8_t)0x00)  /* SWJ (SWD and JTAG) Alternate Function mapping             */
+#define GPIO_AF0_TRACE         ((uint8_t)0x00)  /* TRACE Alternate Function mapping                          */
+
+/**
+  * @brief   AF 1 selection
+  */
+#define GPIO_AF1_TIM1          ((uint8_t)0x01)  /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2          ((uint8_t)0x01)  /* TIM2 Alternate Function mapping */
+
+/**
+  * @brief   AF 2 selection
+  */
+#define GPIO_AF2_TIM3          ((uint8_t)0x02)  /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4          ((uint8_t)0x02)  /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5          ((uint8_t)0x02)  /* TIM5 Alternate Function mapping */
+
+/**
+  * @brief   AF 3 selection
+  */
+#define GPIO_AF3_TIM9          ((uint8_t)0x03)  /* TIM9 Alternate Function mapping  */
+#define GPIO_AF3_TIM10         ((uint8_t)0x03)  /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11         ((uint8_t)0x03)  /* TIM11 Alternate Function mapping */
+
+/**
+  * @brief   AF 4 selection
+  */
+#define GPIO_AF4_I2C1          ((uint8_t)0x04)  /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2          ((uint8_t)0x04)  /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3          ((uint8_t)0x04)  /* I2C3 Alternate Function mapping */
+
+/**
+  * @brief   AF 5 selection
+  */
+#define GPIO_AF5_SPI1          ((uint8_t)0x05)  /* SPI1 Alternate Function mapping        */
+#define GPIO_AF5_SPI2          ((uint8_t)0x05)  /* SPI2/I2S2 Alternate Function mapping   */
+#define GPIO_AF5_SPI4          ((uint8_t)0x05)  /* SPI4 Alternate Function mapping        */
+#define GPIO_AF5_I2S3ext      ((uint8_t)0x05)  /* I2S3ext_SD Alternate Function mapping  */
+
+/**
+  * @brief   AF 6 selection
+  */
+#define GPIO_AF6_SPI3          ((uint8_t)0x06)  /* SPI3/I2S3 Alternate Function mapping  */
+#define GPIO_AF6_I2S2ext      ((uint8_t)0x06)  /* I2S2ext_SD Alternate Function mapping */
+
+/**
+  * @brief   AF 7 selection
+  */
+#define GPIO_AF7_USART1        ((uint8_t)0x07)  /* USART1 Alternate Function mapping     */
+#define GPIO_AF7_USART2        ((uint8_t)0x07)  /* USART2 Alternate Function mapping     */
+#define GPIO_AF7_I2S3ext       ((uint8_t)0x07)  /* I2S3ext_SD Alternate Function mapping */
+
+/**
+  * @brief   AF 8 selection
+  */
+#define GPIO_AF8_USART6        ((uint8_t)0x08)  /* USART6 Alternate Function mapping */
+
+/**
+  * @brief   AF 9 selection
+  */
+#define GPIO_AF9_TIM14         ((uint8_t)0x09)  /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2          ((uint8_t)0x09)  /* I2C2 Alternate Function mapping  */
+#define GPIO_AF9_I2C3          ((uint8_t)0x09)  /* I2C3 Alternate Function mapping  */
+
+
+/**
+  * @brief   AF 10 selection
+  */
+#define GPIO_AF10_OTG_FS        ((uint8_t)0xA)  /* OTG_FS Alternate Function mapping */
+
+/**
+  * @brief   AF 12 selection
+  */
+#define GPIO_AF12_SDIO          ((uint8_t)0xC)  /* SDIO Alternate Function mapping  */
+
+/**
+  * @brief   AF 15 selection
+  */
+#define GPIO_AF15_EVENTOUT      ((uint8_t)0x0F)  /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F401xC || STM32F401xE */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F411xx--------------------------------------*/
+#if defined(STM32F411xE)
+/**
+  * @brief   AF 0 selection
+  */
+#define GPIO_AF0_RTC_50Hz      ((uint8_t)0x00)  /* RTC_50Hz Alternate Function mapping                       */
+#define GPIO_AF0_MCO           ((uint8_t)0x00)  /* MCO (MCO1 and MCO2) Alternate Function mapping            */
+#define GPIO_AF0_TAMPER        ((uint8_t)0x00)  /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ           ((uint8_t)0x00)  /* SWJ (SWD and JTAG) Alternate Function mapping             */
+#define GPIO_AF0_TRACE         ((uint8_t)0x00)  /* TRACE Alternate Function mapping                          */
+
+/**
+  * @brief   AF 1 selection
+  */
+#define GPIO_AF1_TIM1          ((uint8_t)0x01)  /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2          ((uint8_t)0x01)  /* TIM2 Alternate Function mapping */
+
+/**
+  * @brief   AF 2 selection
+  */
+#define GPIO_AF2_TIM3          ((uint8_t)0x02)  /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4          ((uint8_t)0x02)  /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5          ((uint8_t)0x02)  /* TIM5 Alternate Function mapping */
+
+/**
+  * @brief   AF 3 selection
+  */
+#define GPIO_AF3_TIM9          ((uint8_t)0x03)  /* TIM9 Alternate Function mapping  */
+#define GPIO_AF3_TIM10         ((uint8_t)0x03)  /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11         ((uint8_t)0x03)  /* TIM11 Alternate Function mapping */
+
+/**
+  * @brief   AF 4 selection
+  */
+#define GPIO_AF4_I2C1          ((uint8_t)0x04)  /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2          ((uint8_t)0x04)  /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3          ((uint8_t)0x04)  /* I2C3 Alternate Function mapping */
+
+/**
+  * @brief   AF 5 selection
+  */
+#define GPIO_AF5_SPI1          ((uint8_t)0x05)  /* SPI1/I2S1 Alternate Function mapping   */
+#define GPIO_AF5_SPI2          ((uint8_t)0x05)  /* SPI2/I2S2 Alternate Function mapping   */
+#define GPIO_AF5_SPI3          ((uint8_t)0x05)  /* SPI3/I2S3 Alternate Function mapping   */
+#define GPIO_AF5_SPI4          ((uint8_t)0x05)  /* SPI4 Alternate Function mapping        */
+#define GPIO_AF5_I2S3ext       ((uint8_t)0x05)  /* I2S3ext_SD Alternate Function mapping  */
+
+/**
+  * @brief   AF 6 selection
+  */
+#define GPIO_AF6_SPI2          ((uint8_t)0x06)  /* I2S2 Alternate Function mapping       */
+#define GPIO_AF6_SPI3          ((uint8_t)0x06)  /* SPI3/I2S3 Alternate Function mapping  */
+#define GPIO_AF6_SPI4          ((uint8_t)0x06)  /* SPI4/I2S4 Alternate Function mapping  */
+#define GPIO_AF6_SPI5          ((uint8_t)0x06)  /* SPI5/I2S5 Alternate Function mapping  */
+#define GPIO_AF6_I2S2ext       ((uint8_t)0x06)  /* I2S2ext_SD Alternate Function mapping */
+/**
+  * @brief   AF 7 selection
+  */
+#define GPIO_AF7_SPI3          ((uint8_t)0x07)  /* SPI3/I2S3 Alternate Function mapping  */
+#define GPIO_AF7_USART1        ((uint8_t)0x07)  /* USART1 Alternate Function mapping     */
+#define GPIO_AF7_USART2        ((uint8_t)0x07)  /* USART2 Alternate Function mapping     */
+#define GPIO_AF7_I2S3ext       ((uint8_t)0x07)  /* I2S3ext_SD Alternate Function mapping */
+
+/**
+  * @brief   AF 8 selection
+  */
+#define GPIO_AF8_USART6        ((uint8_t)0x08)  /* USART6 Alternate Function mapping */
+
+/**
+  * @brief   AF 9 selection
+  */
+#define GPIO_AF9_TIM14         ((uint8_t)0x09)  /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2          ((uint8_t)0x09)  /* I2C2 Alternate Function mapping  */
+#define GPIO_AF9_I2C3          ((uint8_t)0x09)  /* I2C3 Alternate Function mapping  */
+
+
+/**
+  * @brief   AF 10 selection
+  */
+#define GPIO_AF10_OTG_FS        ((uint8_t)0xA)  /* OTG_FS Alternate Function mapping */
+
+/**
+  * @brief   AF 12 selection
+  */
+#define GPIO_AF12_SDIO          ((uint8_t)0xC)  /* SDIO Alternate Function mapping  */
+
+/**
+  * @brief   AF 15 selection
+  */
+#define GPIO_AF15_EVENTOUT      ((uint8_t)0x0F)  /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F411xE */
+/*---------------------------------------- STM32F446xx -------------------------------------------*/
+#if defined (STM32F446xx)
+/**
+  * @brief   AF 0 selection
+  */
+#define GPIO_AF0_RTC_50Hz      ((uint8_t)0x00)  /* RTC_50Hz Alternate Function mapping                       */
+#define GPIO_AF0_MCO           ((uint8_t)0x00)  /* MCO (MCO1 and MCO2) Alternate Function mapping            */
+#define GPIO_AF0_TAMPER        ((uint8_t)0x00)  /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ           ((uint8_t)0x00)  /* SWJ (SWD and JTAG) Alternate Function mapping             */
+#define GPIO_AF0_TRACE         ((uint8_t)0x00)  /* TRACE Alternate Function mapping                          */
+
+/**
+  * @brief   AF 1 selection
+  */
+#define GPIO_AF1_TIM1          ((uint8_t)0x01)  /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2          ((uint8_t)0x01)  /* TIM2 Alternate Function mapping */
+
+/**
+  * @brief   AF 2 selection
+  */
+#define GPIO_AF2_TIM3          ((uint8_t)0x02)  /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4          ((uint8_t)0x02)  /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5          ((uint8_t)0x02)  /* TIM5 Alternate Function mapping */
+
+/**
+  * @brief   AF 3 selection
+  */
+#define GPIO_AF3_TIM8          ((uint8_t)0x03)  /* TIM8 Alternate Function mapping  */
+#define GPIO_AF3_TIM9          ((uint8_t)0x03)  /* TIM9 Alternate Function mapping  */
+#define GPIO_AF3_TIM10         ((uint8_t)0x03)  /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11         ((uint8_t)0x03)  /* TIM11 Alternate Function mapping */
+#define GPIO_AF3_CEC           ((uint8_t)0x03)  /* CEC Alternate Function mapping   */
+
+/**
+  * @brief   AF 4 selection
+  */
+#define GPIO_AF4_I2C1          ((uint8_t)0x04)  /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2          ((uint8_t)0x04)  /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3          ((uint8_t)0x04)  /* I2C3 Alternate Function mapping */
+#define GPIO_AF4_FMPI2C1       ((uint8_t)0x04)  /* FMPI2C1 Alternate Function mapping */
+#define GPIO_AF4_CEC           ((uint8_t)0x04)  /* CEC Alternate Function mapping  */
+
+/**
+  * @brief   AF 5 selection
+  */
+#define GPIO_AF5_SPI1          ((uint8_t)0x05)  /* SPI1/I2S1 Alternate Function mapping   */
+#define GPIO_AF5_SPI2          ((uint8_t)0x05)  /* SPI2/I2S2 Alternate Function mapping   */
+#define GPIO_AF5_SPI3          ((uint8_t)0x05)  /* SPI3/I2S3 Alternate Function mapping   */
+#define GPIO_AF5_SPI4          ((uint8_t)0x05)  /* SPI4 Alternate Function mapping        */
+
+/**
+  * @brief   AF 6 selection
+  */
+#define GPIO_AF6_SPI2          ((uint8_t)0x06)  /* SPI2/I2S2 Alternate Function mapping  */
+#define GPIO_AF6_SPI3          ((uint8_t)0x06)  /* SPI3/I2S3 Alternate Function mapping  */
+#define GPIO_AF6_SPI4          ((uint8_t)0x06)  /* SPI4 Alternate Function mapping       */
+#define GPIO_AF6_SAI1          ((uint8_t)0x06)  /* SAI1 Alternate Function mapping       */
+
+/**
+  * @brief   AF 7 selection
+  */
+#define GPIO_AF7_USART1        ((uint8_t)0x07)  /* USART1 Alternate Function mapping     */
+#define GPIO_AF7_USART2        ((uint8_t)0x07)  /* USART2 Alternate Function mapping     */
+#define GPIO_AF7_USART3        ((uint8_t)0x07)  /* USART3 Alternate Function mapping     */
+#define GPIO_AF7_UART5         ((uint8_t)0x07)  /* UART5 Alternate Function mapping      */
+#define GPIO_AF7_SPI2          ((uint8_t)0x07)  /* SPI2/I2S2 Alternate Function mapping  */
+#define GPIO_AF7_SPI3          ((uint8_t)0x07)  /* SPI3/I2S3 Alternate Function mapping  */
+#define GPIO_AF7_SPDIFRX         ((uint8_t)0x07)  /* SPDIFRX Alternate Function mapping      */
+
+/**
+  * @brief   AF 8 selection
+  */
+#define GPIO_AF8_UART4         ((uint8_t)0x08)  /* UART4 Alternate Function mapping  */
+#define GPIO_AF8_UART5         ((uint8_t)0x08)  /* UART5 Alternate Function mapping  */
+#define GPIO_AF8_USART6        ((uint8_t)0x08)  /* USART6 Alternate Function mapping */
+#define GPIO_AF8_SPDIFRX         ((uint8_t)0x08)  /* SPDIFRX Alternate Function mapping  */
+#define GPIO_AF8_SAI2          ((uint8_t)0x08)  /* SAI2 Alternate Function mapping   */
+
+/**
+  * @brief   AF 9 selection
+  */
+#define GPIO_AF9_CAN1          ((uint8_t)0x09)  /* CAN1 Alternate Function mapping  */
+#define GPIO_AF9_CAN2          ((uint8_t)0x09)  /* CAN2 Alternate Function mapping  */
+#define GPIO_AF9_TIM12         ((uint8_t)0x09)  /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13         ((uint8_t)0x09)  /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14         ((uint8_t)0x09)  /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_QSPI          ((uint8_t)0x09)  /* QSPI Alternate Function mapping  */
+
+/**
+  * @brief   AF 10 selection
+  */
+#define GPIO_AF10_OTG_FS        ((uint8_t)0xA)  /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS        ((uint8_t)0xA)  /* OTG_HS Alternate Function mapping */
+#define GPIO_AF10_SAI2          ((uint8_t)0xA)  /* SAI2 Alternate Function mapping   */
+#define GPIO_AF10_QSPI          ((uint8_t)0xA)  /* QSPI Alternate Function mapping  */
+
+/**
+  * @brief   AF 11 selection
+  */
+#define GPIO_AF11_ETH           ((uint8_t)0x0B)  /* ETHERNET Alternate Function mapping */
+
+/**
+  * @brief   AF 12 selection
+  */
+#define GPIO_AF12_FMC           ((uint8_t)0xC)  /* FMC Alternate Function mapping                      */
+#define GPIO_AF12_OTG_HS_FS     ((uint8_t)0xC)  /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO          ((uint8_t)0xC)  /* SDIO Alternate Function mapping                     */
+
+/**
+  * @brief   AF 13 selection
+  */
+#define GPIO_AF13_DCMI          ((uint8_t)0x0D)  /* DCMI Alternate Function mapping */
+
+/**
+  * @brief   AF 15 selection
+  */
+#define GPIO_AF15_EVENTOUT      ((uint8_t)0x0F)  /* EVENTOUT Alternate Function mapping */
+
+#endif /* STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
+  * @{
+  */
+/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
+  * @{
+  */
+#if defined (STM32F405xx) || defined (STM32F415xx) || defined (STM32F407xx) || defined (STM32F417xx)
+#define GPIO_GET_INDEX(__GPIOx__)    (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+                                               ((__GPIOx__) == (GPIOB))? 1U :\
+                                               ((__GPIOx__) == (GPIOC))? 2U :\
+                                               ((__GPIOx__) == (GPIOD))? 3U :\
+                                               ((__GPIOx__) == (GPIOE))? 4U :\
+                                               ((__GPIOx__) == (GPIOF))? 5U :\
+                                               ((__GPIOx__) == (GPIOG))? 6U :\
+                                               ((__GPIOx__) == (GPIOH))? 7U :\
+                                               ((__GPIOx__) == (GPIOI))? 8U : 9U)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined (STM32F427xx) || defined (STM32F437xx) || defined (STM32F429xx) || defined (STM32F439xx)
+#define GPIO_GET_INDEX(__GPIOx__)    (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+                                               ((__GPIOx__) == (GPIOB))? 1U :\
+                                               ((__GPIOx__) == (GPIOC))? 2U :\
+                                               ((__GPIOx__) == (GPIOD))? 3U :\
+                                               ((__GPIOx__) == (GPIOE))? 4U :\
+                                               ((__GPIOx__) == (GPIOF))? 5U :\
+                                               ((__GPIOx__) == (GPIOG))? 6U :\
+                                               ((__GPIOx__) == (GPIOH))? 7U :\
+                                               ((__GPIOx__) == (GPIOI))? 8U :\
+                                               ((__GPIOx__) == (GPIOJ))? 9U : 10U)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined (STM32F401xC) || defined (STM32F401xE) || defined (STM32F411xE)
+#define GPIO_GET_INDEX(__GPIOx__)    (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+                                               ((__GPIOx__) == (GPIOB))? 1U :\
+                                               ((__GPIOx__) == (GPIOC))? 2U :\
+                                               ((__GPIOx__) == (GPIOD))? 3U :\
+                                               ((__GPIOx__) == (GPIOE))? 4U : 5U)
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined (STM32F446xx)
+#define GPIO_GET_INDEX(__GPIOx__)    (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+                                               ((__GPIOx__) == (GPIOB))? 1U :\
+                                               ((__GPIOx__) == (GPIOC))? 2U :\
+                                               ((__GPIOx__) == (GPIOD))? 3U :\
+                                               ((__GPIOx__) == (GPIOE))? 4U :\
+                                               ((__GPIOx__) == (GPIOF))? 5U :\
+                                               ((__GPIOx__) == (GPIOG))? 6U : 8U)
+#endif /* STM32F446xx */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
+  * @{
+  */
+/*------------------------- STM32F429xx/STM32F439xx---------------------------*/
+#if defined (STM32F429xx) || defined (STM32F439xx)
+#define IS_GPIO_AF(AF)   (((AF) == GPIO_AF0_RTC_50Hz)   || ((AF) == GPIO_AF9_TIM14)      || \
+                          ((AF) == GPIO_AF0_MCO)        || ((AF) == GPIO_AF0_TAMPER)     || \
+                          ((AF) == GPIO_AF0_SWJ)        || ((AF) == GPIO_AF0_TRACE)      || \
+                          ((AF) == GPIO_AF1_TIM1)       || ((AF) == GPIO_AF1_TIM2)       || \
+                          ((AF) == GPIO_AF2_TIM3)       || ((AF) == GPIO_AF2_TIM4)       || \
+                          ((AF) == GPIO_AF2_TIM5)       || ((AF) == GPIO_AF3_TIM8)       || \
+                          ((AF) == GPIO_AF4_I2C1)       || ((AF) == GPIO_AF4_I2C2)       || \
+                          ((AF) == GPIO_AF4_I2C3)       || ((AF) == GPIO_AF5_SPI1)       || \
+                          ((AF) == GPIO_AF5_SPI2)       || ((AF) == GPIO_AF9_TIM13)      || \
+                          ((AF) == GPIO_AF6_SPI3)       || ((AF) == GPIO_AF9_TIM12)      || \
+                          ((AF) == GPIO_AF7_USART1)     || ((AF) == GPIO_AF7_USART2)     || \
+                          ((AF) == GPIO_AF7_USART3)     || ((AF) == GPIO_AF8_UART4)      || \
+                          ((AF) == GPIO_AF8_UART5)      || ((AF) == GPIO_AF8_USART6)     || \
+                          ((AF) == GPIO_AF9_CAN1)       || ((AF) == GPIO_AF9_CAN2)       || \
+                          ((AF) == GPIO_AF10_OTG_FS)    || ((AF) == GPIO_AF10_OTG_HS)    || \
+                          ((AF) == GPIO_AF11_ETH)       || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+                          ((AF) == GPIO_AF12_SDIO)      || ((AF) == GPIO_AF13_DCMI)      || \
+                          ((AF) == GPIO_AF15_EVENTOUT)  || ((AF) == GPIO_AF5_SPI4)       || \
+                          ((AF) == GPIO_AF5_SPI5)       || ((AF) == GPIO_AF5_SPI6)       || \
+                          ((AF) == GPIO_AF8_UART7)      || ((AF) == GPIO_AF8_UART8)      || \
+                          ((AF) == GPIO_AF12_FMC)       ||  ((AF) == GPIO_AF6_SAI1)      || \
+                          ((AF) == GPIO_AF14_LTDC))
+
+#endif /* STM32F429xx || STM32F439xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F427xx/STM32F437xx--------------------------------*/
+#if defined (STM32F427xx) || defined (STM32F437xx)
+#define IS_GPIO_AF(AF)   (((AF) == GPIO_AF0_RTC_50Hz)   || ((AF) == GPIO_AF9_TIM14)      || \
+                          ((AF) == GPIO_AF0_MCO)        || ((AF) == GPIO_AF0_TAMPER)     || \
+                          ((AF) == GPIO_AF0_SWJ)        || ((AF) == GPIO_AF0_TRACE)      || \
+                          ((AF) == GPIO_AF1_TIM1)       || ((AF) == GPIO_AF1_TIM2)       || \
+                          ((AF) == GPIO_AF2_TIM3)       || ((AF) == GPIO_AF2_TIM4)       || \
+                          ((AF) == GPIO_AF2_TIM5)       || ((AF) == GPIO_AF3_TIM8)       || \
+                          ((AF) == GPIO_AF4_I2C1)       || ((AF) == GPIO_AF4_I2C2)       || \
+                          ((AF) == GPIO_AF4_I2C3)       || ((AF) == GPIO_AF5_SPI1)       || \
+                          ((AF) == GPIO_AF5_SPI2)       || ((AF) == GPIO_AF9_TIM13)      || \
+                          ((AF) == GPIO_AF6_SPI3)       || ((AF) == GPIO_AF9_TIM12)      || \
+                          ((AF) == GPIO_AF7_USART1)     || ((AF) == GPIO_AF7_USART2)     || \
+                          ((AF) == GPIO_AF7_USART3)     || ((AF) == GPIO_AF8_UART4)      || \
+                          ((AF) == GPIO_AF8_UART5)      || ((AF) == GPIO_AF8_USART6)     || \
+                          ((AF) == GPIO_AF9_CAN1)       || ((AF) == GPIO_AF9_CAN2)       || \
+                          ((AF) == GPIO_AF10_OTG_FS)    || ((AF) == GPIO_AF10_OTG_HS)    || \
+                          ((AF) == GPIO_AF11_ETH)       || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+                          ((AF) == GPIO_AF12_SDIO)      || ((AF) == GPIO_AF13_DCMI)      || \
+                          ((AF) == GPIO_AF15_EVENTOUT)  || ((AF) == GPIO_AF5_SPI4)       || \
+                          ((AF) == GPIO_AF5_SPI5)       || ((AF) == GPIO_AF5_SPI6)       || \
+                          ((AF) == GPIO_AF8_UART7)      || ((AF) == GPIO_AF8_UART8)      || \
+                          ((AF) == GPIO_AF12_FMC)       ||  ((AF) == GPIO_AF6_SAI1))
+
+#endif /* STM32F427xx || STM32F437xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F407xx/STM32F417xx--------------------------------*/
+#if defined (STM32F407xx) || defined (STM32F417xx)
+#define IS_GPIO_AF(AF)   (((AF) == GPIO_AF0_RTC_50Hz)   || ((AF) == GPIO_AF9_TIM14)      || \
+                          ((AF) == GPIO_AF0_MCO)        || ((AF) == GPIO_AF0_TAMPER)     || \
+                          ((AF) == GPIO_AF0_SWJ)        || ((AF) == GPIO_AF0_TRACE)      || \
+                          ((AF) == GPIO_AF1_TIM1)       || ((AF) == GPIO_AF1_TIM2)       || \
+                          ((AF) == GPIO_AF2_TIM3)       || ((AF) == GPIO_AF2_TIM4)       || \
+                          ((AF) == GPIO_AF2_TIM5)       || ((AF) == GPIO_AF3_TIM8)       || \
+                          ((AF) == GPIO_AF4_I2C1)       || ((AF) == GPIO_AF4_I2C2)       || \
+                          ((AF) == GPIO_AF4_I2C3)       || ((AF) == GPIO_AF5_SPI1)       || \
+                          ((AF) == GPIO_AF5_SPI2)       || ((AF) == GPIO_AF9_TIM13)      || \
+                          ((AF) == GPIO_AF6_SPI3)       || ((AF) == GPIO_AF9_TIM12)      || \
+                          ((AF) == GPIO_AF7_USART1)     || ((AF) == GPIO_AF7_USART2)     || \
+                          ((AF) == GPIO_AF7_USART3)     || ((AF) == GPIO_AF8_UART4)      || \
+                          ((AF) == GPIO_AF8_UART5)      || ((AF) == GPIO_AF8_USART6)     || \
+                          ((AF) == GPIO_AF9_CAN1)       || ((AF) == GPIO_AF9_CAN2)       || \
+                          ((AF) == GPIO_AF10_OTG_FS)    || ((AF) == GPIO_AF10_OTG_HS)    || \
+                          ((AF) == GPIO_AF11_ETH)       || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+                          ((AF) == GPIO_AF12_SDIO)      || ((AF) == GPIO_AF13_DCMI)      || \
+                          ((AF) == GPIO_AF12_FSMC)      || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F407xx || STM32F417xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F405xx/STM32F415xx--------------------------------*/
+#if defined (STM32F405xx) || defined (STM32F415xx)
+#define IS_GPIO_AF(AF)   (((AF) == GPIO_AF0_RTC_50Hz)   || ((AF) == GPIO_AF9_TIM14)      || \
+                          ((AF) == GPIO_AF0_MCO)        || ((AF) == GPIO_AF0_TAMPER)     || \
+                          ((AF) == GPIO_AF0_SWJ)        || ((AF) == GPIO_AF0_TRACE)      || \
+                          ((AF) == GPIO_AF1_TIM1)       || ((AF) == GPIO_AF1_TIM2)       || \
+                          ((AF) == GPIO_AF2_TIM3)       || ((AF) == GPIO_AF2_TIM4)       || \
+                          ((AF) == GPIO_AF2_TIM5)       || ((AF) == GPIO_AF3_TIM8)       || \
+                          ((AF) == GPIO_AF4_I2C1)       || ((AF) == GPIO_AF4_I2C2)       || \
+                          ((AF) == GPIO_AF4_I2C3)       || ((AF) == GPIO_AF5_SPI1)       || \
+                          ((AF) == GPIO_AF5_SPI2)       || ((AF) == GPIO_AF9_TIM13)      || \
+                          ((AF) == GPIO_AF6_SPI3)       || ((AF) == GPIO_AF9_TIM12)      || \
+                          ((AF) == GPIO_AF7_USART1)     || ((AF) == GPIO_AF7_USART2)     || \
+                          ((AF) == GPIO_AF7_USART3)     || ((AF) == GPIO_AF8_UART4)      || \
+                          ((AF) == GPIO_AF8_UART5)      || ((AF) == GPIO_AF8_USART6)     || \
+                          ((AF) == GPIO_AF9_CAN1)       || ((AF) == GPIO_AF9_CAN2)       || \
+                          ((AF) == GPIO_AF10_OTG_FS)    || ((AF) == GPIO_AF10_OTG_HS)    || \
+                          ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO)      || \
+                          ((AF) == GPIO_AF12_FSMC)      || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F405xx || STM32F415xx */
+
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F401xx--------------------------------------*/
+#if defined(STM32F401xC) || defined(STM32F401xE)
+#define IS_GPIO_AF(AF)   (((AF) == GPIO_AF0_RTC_50Hz)   || ((AF) == GPIO_AF9_TIM14)      || \
+                          ((AF) == GPIO_AF0_MCO)        || ((AF) == GPIO_AF0_TAMPER)     || \
+                          ((AF) == GPIO_AF0_SWJ)        || ((AF) == GPIO_AF0_TRACE)      || \
+                          ((AF) == GPIO_AF1_TIM1)       || ((AF) == GPIO_AF1_TIM2)       || \
+                          ((AF) == GPIO_AF2_TIM3)       || ((AF) == GPIO_AF2_TIM4)       || \
+                          ((AF) == GPIO_AF2_TIM5)       || ((AF) == GPIO_AF4_I2C1)       || \
+                          ((AF) == GPIO_AF4_I2C2)       || ((AF) == GPIO_AF4_I2C3)       || \
+                          ((AF) == GPIO_AF5_SPI1)       || ((AF) == GPIO_AF5_SPI2)       || \
+                          ((AF) == GPIO_AF6_SPI3)       || ((AF) == GPIO_AF5_SPI4)       || \
+                          ((AF) == GPIO_AF7_USART1)     || ((AF) == GPIO_AF7_USART2)     || \
+                          ((AF) == GPIO_AF8_USART6)     || ((AF) == GPIO_AF10_OTG_FS)    || \
+                          ((AF) == GPIO_AF9_I2C2)       || ((AF) == GPIO_AF9_I2C3)       || \
+                          ((AF) == GPIO_AF12_SDIO)      || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F401xC || STM32F401xE */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F411xx--------------------------------------*/
+#if defined(STM32F411xE)
+#define IS_GPIO_AF(AF)   (((AF) == GPIO_AF0_RTC_50Hz)   || ((AF) == GPIO_AF9_TIM14)      || \
+                          ((AF) == GPIO_AF0_MCO)        || ((AF) == GPIO_AF0_TAMPER)     || \
+                          ((AF) == GPIO_AF0_SWJ)        || ((AF) == GPIO_AF0_TRACE)      || \
+                          ((AF) == GPIO_AF1_TIM1)       || ((AF) == GPIO_AF1_TIM2)       || \
+                          ((AF) == GPIO_AF2_TIM3)       || ((AF) == GPIO_AF2_TIM4)       || \
+                          ((AF) == GPIO_AF2_TIM5)       || ((AF) == GPIO_AF4_I2C1)       || \
+                          ((AF) == GPIO_AF4_I2C2)       || ((AF) == GPIO_AF4_I2C3)       || \
+                          ((AF) == GPIO_AF5_SPI1)       || ((AF) == GPIO_AF5_SPI2)       || \
+                          ((AF) == GPIO_AF5_SPI3)       || ((AF) == GPIO_AF6_SPI4)       || \
+                          ((AF) == GPIO_AF6_SPI3)       || ((AF) == GPIO_AF5_SPI4)       || \
+                          ((AF) == GPIO_AF6_SPI5)       || ((AF) == GPIO_AF7_SPI3)       || \
+                          ((AF) == GPIO_AF7_USART1)     || ((AF) == GPIO_AF7_USART2)     || \
+                          ((AF) == GPIO_AF8_USART6)     || ((AF) == GPIO_AF10_OTG_FS)    || \
+                          ((AF) == GPIO_AF9_I2C2)       || ((AF) == GPIO_AF9_I2C3)       || \
+                          ((AF) == GPIO_AF12_SDIO)      || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F411xE */
+/*----------------------------------------------------------------------------------------------------*/
+
+/*----------------------------------------------- STM32F446xx ----------------------------------------*/
+#if defined(STM32F446xx)
+#define IS_GPIO_AF(AF)   (((AF) == GPIO_AF0_RTC_50Hz)   || ((AF) == GPIO_AF9_TIM14)      || \
+                          ((AF) == GPIO_AF0_MCO)        || ((AF) == GPIO_AF0_TAMPER)     || \
+                          ((AF) == GPIO_AF0_SWJ)        || ((AF) == GPIO_AF0_TRACE)      || \
+                          ((AF) == GPIO_AF1_TIM1)       || ((AF) == GPIO_AF1_TIM2)       || \
+                          ((AF) == GPIO_AF2_TIM3)       || ((AF) == GPIO_AF2_TIM4)       || \
+                          ((AF) == GPIO_AF2_TIM5)       || ((AF) == GPIO_AF3_TIM8)       || \
+                          ((AF) == GPIO_AF4_I2C1)       || ((AF) == GPIO_AF4_I2C2)       || \
+                          ((AF) == GPIO_AF4_I2C3)       || ((AF) == GPIO_AF5_SPI1)       || \
+                          ((AF) == GPIO_AF5_SPI2)       || ((AF) == GPIO_AF9_TIM13)      || \
+                          ((AF) == GPIO_AF6_SPI3)       || ((AF) == GPIO_AF9_TIM12)      || \
+                          ((AF) == GPIO_AF7_USART1)     || ((AF) == GPIO_AF7_USART2)     || \
+                          ((AF) == GPIO_AF7_USART3)     || ((AF) == GPIO_AF8_UART4)      || \
+                          ((AF) == GPIO_AF8_UART5)      || ((AF) == GPIO_AF8_USART6)     || \
+                          ((AF) == GPIO_AF9_CAN1)       || ((AF) == GPIO_AF9_CAN2)       || \
+                          ((AF) == GPIO_AF10_OTG_FS)    || ((AF) == GPIO_AF10_OTG_HS)    || \
+                          ((AF) == GPIO_AF11_ETH)       || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+                          ((AF) == GPIO_AF12_SDIO)      || ((AF) == GPIO_AF13_DCMI)      || \
+                          ((AF) == GPIO_AF15_EVENTOUT)  || ((AF) == GPIO_AF5_SPI4)       || \
+                          ((AF) == GPIO_AF12_FMC)       ||  ((AF) == GPIO_AF6_SAI1)      || \
+                          ((AF) == GPIO_AF3_CEC)        ||  ((AF) == GPIO_AF4_CEC)       || \
+                          ((AF) == GPIO_AF5_SPI3)       ||  ((AF) == GPIO_AF6_SPI2)      || \
+                          ((AF) == GPIO_AF6_SPI4)       ||  ((AF) == GPIO_AF7_UART5)      || \
+                          ((AF) == GPIO_AF7_SPI2)       ||  ((AF) == GPIO_AF7_SPI3)       || \
+                          ((AF) == GPIO_AF7_SPDIFRX)      ||  ((AF) == GPIO_AF8_SPDIFRX)      || \
+                          ((AF) == GPIO_AF8_SAI2)       ||  ((AF) == GPIO_AF9_QSPI)       || \
+                          ((AF) == GPIO_AF10_SAI2)      ||  ((AF) == GPIO_AF10_QSPI))
+
+#endif /* STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash.h
new file mode 100644
index 0000000..d20e20e
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash.h
@@ -0,0 +1,450 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_hash.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of HASH HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HASH_H
+#define __STM32F4xx_HAL_HASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HASH
+  * @brief HASH HAL module driver
+  *  @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HASH_Exported_Types HASH Exported Types
+  * @{
+  */
+
+/** @defgroup HASH_Exported_Types_Group1 HASH Configuration Structure definition
+  * @{
+  */
+
+typedef struct
+{
+  uint32_t DataType;  /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+                           This parameter can be a value of @ref HASH DataType */
+
+  uint32_t KeySize;   /*!< The key size is used only in HMAC operation          */
+
+  uint8_t* pKey;      /*!< The key is used only in HMAC operation               */
+}HASH_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Types_Group2 HASH State structures definition
+  * @{
+  */
+
+typedef enum
+{
+  HAL_HASH_STATE_RESET     = 0x00,  /*!< HASH not yet initialized or disabled */
+  HAL_HASH_STATE_READY     = 0x01,  /*!< HASH initialized and ready for use   */
+  HAL_HASH_STATE_BUSY      = 0x02,  /*!< HASH internal process is ongoing     */
+  HAL_HASH_STATE_TIMEOUT   = 0x03,  /*!< HASH timeout state                   */
+  HAL_HASH_STATE_ERROR     = 0x04   /*!< HASH error state                     */
+}HAL_HASH_STATETypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Types_Group3 HASH phase structures definition
+  * @{
+  */
+
+typedef enum
+{
+  HAL_HASH_PHASE_READY     = 0x01,  /*!< HASH peripheral is ready for initialization */
+  HAL_HASH_PHASE_PROCESS   = 0x02,  /*!< HASH peripheral is in processing phase      */
+}HAL_HASHPhaseTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Types_Group4 HASH Handle structures definition
+  * @{
+  */
+
+typedef struct
+{
+      HASH_InitTypeDef           Init;              /*!< HASH required parameters       */
+
+      uint8_t                    *pHashInBuffPtr;   /*!< Pointer to input buffer        */
+
+      uint8_t                    *pHashOutBuffPtr;  /*!< Pointer to input buffer        */
+
+     __IO uint32_t               HashBuffSize;      /*!< Size of buffer to be processed */
+
+     __IO uint32_t               HashInCount;       /*!< Counter of inputed data        */
+
+     __IO uint32_t               HashITCounter;     /*!< Counter of issued interrupts   */
+
+      HAL_StatusTypeDef          Status;            /*!< HASH peripheral status         */
+
+      HAL_HASHPhaseTypeDef       Phase;             /*!< HASH peripheral phase          */
+
+      DMA_HandleTypeDef          *hdmain;           /*!< HASH In DMA handle parameters  */
+
+      HAL_LockTypeDef            Lock;              /*!< HASH locking object            */
+
+     __IO HAL_HASH_STATETypeDef  State;             /*!< HASH peripheral state          */
+} HASH_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HASH_Exported_Constants HASH Exported Constants
+  * @{
+  */
+
+/** @defgroup HASH_Exported_Constants_Group1 HASH Algorithm Selection
+  * @{
+  */
+#define HASH_ALGOSELECTION_SHA1      ((uint32_t)0x0000)  /*!< HASH function is SHA1   */
+#define HASH_ALGOSELECTION_SHA224    HASH_CR_ALGO_1      /*!< HASH function is SHA224 */
+#define HASH_ALGOSELECTION_SHA256    HASH_CR_ALGO        /*!< HASH function is SHA256 */
+#define HASH_ALGOSELECTION_MD5       HASH_CR_ALGO_0      /*!< HASH function is MD5    */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Constants_Group2 HASH Algorithm Mode
+  * @{
+  */
+#define HASH_ALGOMODE_HASH         ((uint32_t)0x00000000)  /*!< Algorithm is HASH */
+#define HASH_ALGOMODE_HMAC         HASH_CR_MODE            /*!< Algorithm is HMAC */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Constants_Group3 HASH DataType
+  * @{
+  */
+#define HASH_DATATYPE_32B          ((uint32_t)0x0000) /*!< 32-bit data. No swapping                     */
+#define HASH_DATATYPE_16B          HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped       */
+#define HASH_DATATYPE_8B           HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped            */
+#define HASH_DATATYPE_1B           HASH_CR_DATATYPE   /*!< 1-bit data. In the word all bits are swapped */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Constants_Group4 HASH HMAC Long key
+  * @brief HASH HMAC Long key used only for HMAC mode
+  * @{
+  */
+#define HASH_HMAC_KEYTYPE_SHORTKEY      ((uint32_t)0x00000000)  /*!< HMAC Key is <= 64 bytes */
+#define HASH_HMAC_KEYTYPE_LONGKEY       HASH_CR_LKEY            /*!< HMAC Key is > 64 bytes  */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Constants_Group5 HASH Flags definition
+  * @{
+  */
+#define HASH_FLAG_DINIS            HASH_SR_DINIS  /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer */
+#define HASH_FLAG_DCIS             HASH_SR_DCIS   /*!< Digest calculation complete                                                         */
+#define HASH_FLAG_DMAS             HASH_SR_DMAS   /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing                          */
+#define HASH_FLAG_BUSY             HASH_SR_BUSY   /*!< The hash core is Busy : processing a block of data                                  */
+#define HASH_FLAG_DINNE            HASH_CR_DINNE  /*!< DIN not empty : The input buffer contains at least one word of data                 */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Constants_Group6 HASH Interrupts definition
+  * @{
+  */
+#define HASH_IT_DINI               HASH_IMR_DINIE  /*!< A new block can be entered into the input buffer (DIN) */
+#define HASH_IT_DCI                HASH_IMR_DCIE   /*!< Digest calculation complete                            */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HASH_Exported_Macros HASH Exported Macros
+  * @{
+  */
+
+/** @brief Reset HASH handle state
+  * @param  __HANDLE__: specifies the HASH handle.
+  * @retval None
+  */
+#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HASH_STATE_RESET)
+
+/** @brief  Check whether the specified HASH flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg HASH_FLAG_DINIS: A new block can be entered into the input buffer.
+  *            @arg HASH_FLAG_DCIS: Digest calculation complete
+  *            @arg HASH_FLAG_DMAS: DMA interface is enabled (DMAE=1) or a transfer is ongoing
+  *            @arg HASH_FLAG_BUSY: The hash core is Busy : processing a block of data
+  *            @arg HASH_FLAG_DINNE: DIN not empty : The input buffer contains at least one word of data
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_HASH_GET_FLAG(__FLAG__) (((__FLAG__) > 8U) ? ((HASH->CR & (__FLAG__)) == (__FLAG__)) :\
+                                                           ((HASH->SR & (__FLAG__)) == (__FLAG__)))
+/**
+  * @brief  Enable the multiple DMA mode.
+  *         This feature is available only in STM32F429x and STM32F439x devices.
+  * @retval None
+  */
+#define __HAL_HASH_SET_MDMAT()          HASH->CR |= HASH_CR_MDMAT
+
+/**
+  * @brief  Disable the multiple DMA mode.
+  * @retval None
+  */
+#define __HAL_HASH_RESET_MDMAT()        HASH->CR &= (uint32_t)(~HASH_CR_MDMAT)
+
+/**
+  * @brief  Start the digest computation
+  * @retval None
+  */
+#define __HAL_HASH_START_DIGEST()       HASH->STR |= HASH_STR_DCAL
+
+/**
+  * @brief Set the number of valid bits in last word written in Data register
+  * @param  SIZE: size in byte of last data written in Data register.
+  * @retval None
+*/
+#define __HAL_HASH_SET_NBVALIDBITS(SIZE) do{HASH->STR &= ~(HASH_STR_NBLW);\
+                                            HASH->STR |= 8 * ((SIZE) % 4);\
+                                           }while(0)
+
+/**
+  * @}
+  */
+
+/* Include HASH HAL Extension module */
+#include "stm32f4xx_hal_hash_ex.h"
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HASH_Exported_Functions HASH Exported Functions
+  * @{
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash);
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash);
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group2
+  * @{
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group3
+  * @{
+  */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group4
+  * @{
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group5
+  * @{
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group6
+  * @{
+  */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group7
+  * @{
+  */
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash);
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group8
+  * @{
+  */
+HAL_HASH_STATETypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash);
+/**
+  * @}
+  */
+
+ /**
+  * @}
+  */
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup HASH_Private_Types HASH Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Variables HASH Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Constants HASH Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HASH_Private_Macros HASH Private Macros
+  * @{
+  */
+#define IS_HASH_ALGOSELECTION(__ALGOSELECTION__) (((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA1)   || \
+                                                  ((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA224) || \
+                                                  ((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA256) || \
+                                                  ((__ALGOSELECTION__) == HASH_ALGOSELECTION_MD5))
+
+
+#define IS_HASH_ALGOMODE(__ALGOMODE__) (((__ALGOMODE__) == HASH_ALGOMODE_HASH) || \
+                                        ((__ALGOMODE__) == HASH_ALGOMODE_HMAC))
+
+
+#define IS_HASH_DATATYPE(__DATATYPE__) (((__DATATYPE__) == HASH_DATATYPE_32B)|| \
+                                        ((__DATATYPE__) == HASH_DATATYPE_16B)|| \
+                                        ((__DATATYPE__) == HASH_DATATYPE_8B) || \
+                                        ((__DATATYPE__) == HASH_DATATYPE_1B))
+
+
+#define IS_HASH_HMAC_KEYTYPE(__KEYTYPE__) (((__KEYTYPE__) == HASH_HMAC_KEYTYPE_SHORTKEY) || \
+                                           ((__KEYTYPE__) == HASH_HMAC_KEYTYPE_LONGKEY))
+
+#define IS_HASH_SHA1_BUFFER_SIZE(__SIZE__) ((((__SIZE__)%4) != 0)? 0U: 1U)
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Functions HASH Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_HASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash_ex.h
new file mode 100644
index 0000000..da47cc5
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash_ex.h
@@ -0,0 +1,200 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_hash_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of HASH HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HASH_EX_H
+#define __STM32F4xx_HAL_HASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HASHEx
+  * @brief HASHEx HAL Extension module driver
+  *  @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HASHEx_Exported_Functions HASHEx Exported Functions
+  * @{
+  */
+
+/** @defgroup HASHEx_Exported_Functions_Group1 HASHEx processing using polling functions
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/**
+  * @}
+  */
+
+/** @defgroup HASHEx_Exported_Functions_Group2 HMAC processing using polling functions
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+  * @}
+  */
+
+/** @defgroup HASHEx_Exported_Functions_Group3 HASHEx processing using  functions
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+
+/**
+  * @}
+  */
+
+/** @defgroup HASHEx_Exported_Functions_Group4 HASHEx processing using DMA
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+  * @}
+  */
+
+/** @defgroup HASHEx_Exported_Functions_Group5 HMAC processing using DMA
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+  * @}
+  */
+
+/** @defgroup HASHEx_Exported_Functions_Group6 HASHEx processing functions
+  * @{
+  */
+
+void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Types HASHEx Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Variables HASHEx Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Constants HASHEx Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Macros HASHEx Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Functions HASHEx Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F437xx || STM32F439xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_HASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h
new file mode 100644
index 0000000..3d02f79
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h
@@ -0,0 +1,269 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_hcd.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of HCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HCD_H
+#define __STM32F4xx_HAL_HCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HCD
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Types HCD Exported Types
+  * @{
+  */
+
+/** @defgroup HCD_Exported_Types_Group1 HCD State Structure definition
+  * @{
+  */
+typedef enum
+{
+  HAL_HCD_STATE_RESET    = 0x00,
+  HAL_HCD_STATE_READY    = 0x01,
+  HAL_HCD_STATE_ERROR    = 0x02,
+  HAL_HCD_STATE_BUSY     = 0x03,
+  HAL_HCD_STATE_TIMEOUT  = 0x04
+} HCD_StateTypeDef;
+
+typedef USB_OTG_GlobalTypeDef   HCD_TypeDef;
+typedef USB_OTG_CfgTypeDef      HCD_InitTypeDef;
+typedef USB_OTG_HCTypeDef       HCD_HCTypeDef ;
+typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef ;
+typedef USB_OTG_HCStateTypeDef  HCD_HCStateTypeDef ;
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Exported_Types_Group2 HCD Handle Structure definition
+  * @{
+  */
+typedef struct
+{
+  HCD_TypeDef               *Instance;  /*!< Register base address    */
+  HCD_InitTypeDef           Init;       /*!< HCD required parameters  */
+  HCD_HCTypeDef             hc[15];     /*!< Host channels parameters */
+  HAL_LockTypeDef           Lock;       /*!< HCD peripheral status    */
+  __IO HCD_StateTypeDef     State;      /*!< HCD communication state  */
+  void                      *pData;     /*!< Pointer Stack Handler    */
+} HCD_HandleTypeDef;
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Constants HCD Exported Constants
+  * @{
+  */
+
+/** @defgroup HCD_Speed HCD Speed
+  * @{
+  */
+#define HCD_SPEED_HIGH               0
+#define HCD_SPEED_LOW                2
+#define HCD_SPEED_FULL               3
+/**
+  * @}
+  */
+
+/** @defgroup HCD_PHY_Module HCD PHY Module
+  * @{
+  */
+#define HCD_PHY_ULPI                 1
+#define HCD_PHY_EMBEDDED             2
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Macros HCD Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_HCD_ENABLE(__HANDLE__)               USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_HCD_DISABLE(__HANDLE__)              USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__)  (USBx_HC(chnum)->HCINT = (__INTERRUPT__))
+#define __HAL_HCD_MASK_HALT_HC_INT(chnum)             (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum)           (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_MASK_ACK_HC_INT(chnum)              (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM)
+#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum)            (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HCD_Exported_Functions HCD Exported Functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+/** @addtogroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef   HAL_HCD_Init(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef   HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef   HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
+                                    uint8_t ch_num,
+                                    uint8_t epnum,
+                                    uint8_t dev_address,
+                                    uint8_t speed,
+                                    uint8_t ep_type,
+                                    uint16_t mps);
+
+HAL_StatusTypeDef   HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num);
+
+void                HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
+void                HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
+/**
+  * @}
+  */
+
+/* I/O operation functions  ***************************************************/
+/** @addtogroup HCD_Exported_Functions_Group2 IO operation functions
+  * @{
+  */
+HAL_StatusTypeDef   HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
+                                             uint8_t pipe,
+                                             uint8_t direction,
+                                             uint8_t ep_type,
+                                             uint8_t token,
+                                             uint8_t* pbuff,
+                                             uint16_t length,
+                                             uint8_t do_ping);
+
+/* Non-Blocking mode: Interrupt */
+void                HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
+void                HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
+void                HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
+void                HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
+void                HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd,
+                                                        uint8_t chnum,
+                                                        HCD_URBStateTypeDef urb_state);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+/** @addtogroup HCD_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef   HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef   HAL_HCD_Start(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef   HAL_HCD_Stop(HCD_HandleTypeDef *hhcd);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+/** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+HCD_StateTypeDef    HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
+HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t            HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+HCD_HCStateTypeDef  HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t            HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
+uint32_t            HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HCD_Private_Macros HCD Private Macros
+ * @{
+ */
+/** @defgroup HCD_Instance_definition HCD Instance definition
+  * @{
+  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) ||\
+    defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+ #define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
+                                        ((INSTANCE) == USB_OTG_HS))
+#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ #define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+#endif
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_HCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h
new file mode 100644
index 0000000..efe0041
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h
@@ -0,0 +1,535 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_i2c.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of I2C HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2C_H
+#define __STM32F4xx_HAL_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2C
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+  * @{
+  */
+
+/**
+  * @brief  I2C Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t ClockSpeed;       /*!< Specifies the clock frequency.
+                                  This parameter must be set to a value lower than 400kHz */
+
+  uint32_t DutyCycle;        /*!< Specifies the I2C fast mode duty cycle.
+                                  This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
+
+  uint32_t OwnAddress1;      /*!< Specifies the first device own address.
+                                  This parameter can be a 7-bit or 10-bit address. */
+
+  uint32_t AddressingMode;   /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+                                  This parameter can be a value of @ref I2C_addressing_mode */
+
+  uint32_t DualAddressMode;  /*!< Specifies if dual addressing mode is selected.
+                                  This parameter can be a value of @ref I2C_dual_addressing_mode */
+
+  uint32_t OwnAddress2;      /*!< Specifies the second device own address if dual addressing mode is selected
+                                  This parameter can be a 7-bit address. */
+
+  uint32_t GeneralCallMode;  /*!< Specifies if general call mode is selected.
+                                  This parameter can be a value of @ref I2C_general_call_addressing_mode */
+
+  uint32_t NoStretchMode;    /*!< Specifies if nostretch mode is selected.
+                                  This parameter can be a value of @ref I2C_nostretch_mode */
+
+}I2C_InitTypeDef;
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_I2C_STATE_RESET             = 0x00,  /*!< I2C not yet initialized or disabled         */
+  HAL_I2C_STATE_READY             = 0x01,  /*!< I2C initialized and ready for use           */
+  HAL_I2C_STATE_BUSY              = 0x02,  /*!< I2C internal process is ongoing             */
+  HAL_I2C_STATE_BUSY_TX           = 0x12,  /*!< Data Transmission process is ongoing        */
+  HAL_I2C_STATE_BUSY_RX           = 0x22,  /*!< Data Reception process is ongoing           */
+  HAL_I2C_STATE_MEM_BUSY_TX       = 0x32,  /*!< Memory Data Transmission process is ongoing */
+  HAL_I2C_STATE_MEM_BUSY_RX       = 0x42,  /*!< Memory Data Reception process is ongoing    */
+  HAL_I2C_STATE_TIMEOUT           = 0x03,  /*!< I2C timeout state                           */
+  HAL_I2C_STATE_ERROR             = 0x04   /*!< I2C error state                             */
+
+}HAL_I2C_StateTypeDef;
+
+/**
+  * @brief  I2C handle Structure definition
+  */
+typedef struct
+{
+  I2C_TypeDef                *Instance;  /*!< I2C registers base address     */
+
+  I2C_InitTypeDef            Init;       /*!< I2C communication parameters   */
+
+  uint8_t                    *pBuffPtr;  /*!< Pointer to I2C transfer buffer */
+
+  uint16_t                   XferSize;   /*!< I2C transfer size              */
+
+  __IO uint16_t              XferCount;  /*!< I2C transfer counter           */
+
+  DMA_HandleTypeDef          *hdmatx;    /*!< I2C Tx DMA handle parameters   */
+
+  DMA_HandleTypeDef          *hdmarx;    /*!< I2C Rx DMA handle parameters   */
+
+  HAL_LockTypeDef            Lock;       /*!< I2C locking object             */
+
+  __IO HAL_I2C_StateTypeDef  State;      /*!< I2C communication state        */
+
+  __IO uint32_t              ErrorCode;  /*!<  I2C Error code                */
+
+}I2C_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+  * @{
+  */
+
+/** @defgroup I2C_Error_Code I2C Error Code
+  * @brief    I2C Error Code
+  * @{
+  */
+#define HAL_I2C_ERROR_NONE       ((uint32_t)0x00000000)    /*!< No error           */
+#define HAL_I2C_ERROR_BERR       ((uint32_t)0x00000001)    /*!< BERR error         */
+#define HAL_I2C_ERROR_ARLO       ((uint32_t)0x00000002)    /*!< ARLO error         */
+#define HAL_I2C_ERROR_AF         ((uint32_t)0x00000004)    /*!< AF error           */
+#define HAL_I2C_ERROR_OVR        ((uint32_t)0x00000008)    /*!< OVR error          */
+#define HAL_I2C_ERROR_DMA        ((uint32_t)0x00000010)    /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT    ((uint32_t)0x00000020)    /*!< Timeout Error      */
+/**
+  * @}
+  */
+
+/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode
+  * @{
+  */
+#define I2C_DUTYCYCLE_2                 ((uint32_t)0x00000000)
+#define I2C_DUTYCYCLE_16_9              I2C_CCR_DUTY
+/**
+  * @}
+  */
+
+/** @defgroup I2C_addressing_mode I2C addressing mode
+  * @{
+  */
+#define I2C_ADDRESSINGMODE_7BIT         ((uint32_t)0x00004000)
+#define I2C_ADDRESSINGMODE_10BIT        (I2C_OAR1_ADDMODE | ((uint32_t)0x00004000))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_dual_addressing_mode  I2C dual addressing mode
+  * @{
+  */
+#define I2C_DUALADDRESS_DISABLE        ((uint32_t)0x00000000)
+#define I2C_DUALADDRESS_ENABLE         I2C_OAR2_ENDUAL
+/**
+  * @}
+  */
+
+/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
+  * @{
+  */
+#define I2C_GENERALCALL_DISABLE        ((uint32_t)0x00000000)
+#define I2C_GENERALCALL_ENABLE         I2C_CR1_ENGC
+/**
+  * @}
+  */
+
+/** @defgroup I2C_nostretch_mode I2C nostretch mode
+  * @{
+  */
+#define I2C_NOSTRETCH_DISABLE          ((uint32_t)0x00000000)
+#define I2C_NOSTRETCH_ENABLE           I2C_CR1_NOSTRETCH
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
+  * @{
+  */
+#define I2C_MEMADD_SIZE_8BIT            ((uint32_t)0x00000001)
+#define I2C_MEMADD_SIZE_16BIT           ((uint32_t)0x00000010)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+  * @{
+  */
+#define I2C_IT_BUF                      I2C_CR2_ITBUFEN
+#define I2C_IT_EVT                      I2C_CR2_ITEVTEN
+#define I2C_IT_ERR                      I2C_CR2_ITERREN
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+  * @{
+  */
+#define I2C_FLAG_SMBALERT               ((uint32_t)0x00018000)
+#define I2C_FLAG_TIMEOUT                ((uint32_t)0x00014000)
+#define I2C_FLAG_PECERR                 ((uint32_t)0x00011000)
+#define I2C_FLAG_OVR                    ((uint32_t)0x00010800)
+#define I2C_FLAG_AF                     ((uint32_t)0x00010400)
+#define I2C_FLAG_ARLO                   ((uint32_t)0x00010200)
+#define I2C_FLAG_BERR                   ((uint32_t)0x00010100)
+#define I2C_FLAG_TXE                    ((uint32_t)0x00010080)
+#define I2C_FLAG_RXNE                   ((uint32_t)0x00010040)
+#define I2C_FLAG_STOPF                  ((uint32_t)0x00010010)
+#define I2C_FLAG_ADD10                  ((uint32_t)0x00010008)
+#define I2C_FLAG_BTF                    ((uint32_t)0x00010004)
+#define I2C_FLAG_ADDR                   ((uint32_t)0x00010002)
+#define I2C_FLAG_SB                     ((uint32_t)0x00010001)
+#define I2C_FLAG_DUALF                  ((uint32_t)0x00100080)
+#define I2C_FLAG_SMBHOST                ((uint32_t)0x00100040)
+#define I2C_FLAG_SMBDEFAULT             ((uint32_t)0x00100020)
+#define I2C_FLAG_GENCALL                ((uint32_t)0x00100010)
+#define I2C_FLAG_TRA                    ((uint32_t)0x00100004)
+#define I2C_FLAG_BUSY                   ((uint32_t)0x00100002)
+#define I2C_FLAG_MSL                    ((uint32_t)0x00100001)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+  * @{
+  */
+
+/** @brief Reset I2C handle state
+  * @param  __HANDLE__: specifies the I2C Handle.
+  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+  * @retval None
+  */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief  Enable or disable the specified I2C interrupts.
+  * @param  __HANDLE__: specifies the I2C Handle.
+  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
+  *         This parameter can be one of the following values:
+  *            @arg I2C_IT_BUF: Buffer interrupt enable
+  *            @arg I2C_IT_EVT: Event interrupt enable
+  *            @arg I2C_IT_ERR: Error interrupt enable
+  * @retval None
+  */
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief  Checks if the specified I2C interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the I2C Handle.
+  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+  * @param  __INTERRUPT__: specifies the I2C interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg I2C_IT_BUF: Buffer interrupt enable
+  *            @arg I2C_IT_EVT: Event interrupt enable
+  *            @arg I2C_IT_ERR: Error interrupt enable
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks whether the specified I2C flag is set or not.
+  * @param  __HANDLE__: specifies the I2C Handle.
+  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+  *            @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+  *            @arg I2C_FLAG_PECERR: PEC error in reception flag
+  *            @arg I2C_FLAG_OVR: Overrun/Underrun flag
+  *            @arg I2C_FLAG_AF: Acknowledge failure flag
+  *            @arg I2C_FLAG_ARLO: Arbitration lost flag
+  *            @arg I2C_FLAG_BERR: Bus error flag
+  *            @arg I2C_FLAG_TXE: Data register empty flag
+  *            @arg I2C_FLAG_RXNE: Data register not empty flag
+  *            @arg I2C_FLAG_STOPF: Stop detection flag
+  *            @arg I2C_FLAG_ADD10: 10-bit header sent flag
+  *            @arg I2C_FLAG_BTF: Byte transfer finished flag
+  *            @arg I2C_FLAG_ADDR: Address sent flag
+  *                                Address matched flag
+  *            @arg I2C_FLAG_SB: Start bit flag
+  *            @arg I2C_FLAG_DUALF: Dual flag
+  *            @arg I2C_FLAG_SMBHOST: SMBus host header
+  *            @arg I2C_FLAG_SMBDEFAULT: SMBus default header
+  *            @arg I2C_FLAG_GENCALL: General call header flag
+  *            @arg I2C_FLAG_TRA: Transmitter/Receiver flag
+  *            @arg I2C_FLAG_BUSY: Bus busy flag
+  *            @arg I2C_FLAG_MSL: Master/Slave flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16)) == 0x01)?((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)): \
+                                                 ((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)))
+
+/** @brief  Clears the I2C pending flags which are cleared by writing 0 in a specific bit.
+  * @param  __HANDLE__: specifies the I2C Handle.
+  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+  * @param  __FLAG__: specifies the flag to clear.
+  *         This parameter can be any combination of the following values:
+  *            @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+  *            @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+  *            @arg I2C_FLAG_PECERR: PEC error in reception flag
+  *            @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+  *            @arg I2C_FLAG_AF: Acknowledge failure flag
+  *            @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+  *            @arg I2C_FLAG_BERR: Bus error flag
+  * @retval None
+  */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK))
+
+/** @brief  Clears the I2C ADDR pending flag.
+  * @param  __HANDLE__: specifies the I2C Handle.
+  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+  * @retval None
+  */
+#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__)    \
+  do{                                           \
+    __IO uint32_t tmpreg;                       \
+    tmpreg = (__HANDLE__)->Instance->SR1;       \
+    tmpreg = (__HANDLE__)->Instance->SR2;       \
+    UNUSED(tmpreg);                             \
+  } while(0)
+
+/** @brief  Clears the I2C STOPF pending flag.
+  * @param  __HANDLE__: specifies the I2C Handle.
+  *         This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+  * @retval None
+  */
+#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__)    \
+  do{                                           \
+    __IO uint32_t tmpreg;                       \
+    tmpreg = (__HANDLE__)->Instance->SR1;       \
+    (__HANDLE__)->Instance->CR1 |= I2C_CR1_PE;  \
+    UNUSED(tmpreg);                             \
+  } while(0)
+
+#define __HAL_I2C_ENABLE(__HANDLE__)                             ((__HANDLE__)->Instance->CR1 |=  I2C_CR1_PE)
+#define __HAL_I2C_DISABLE(__HANDLE__)                            ((__HANDLE__)->Instance->CR1 &=  ~I2C_CR1_PE)
+
+/**
+  * @}
+  */
+
+/* Include I2C HAL Extension module */
+#include "stm32f4xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions  *****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control and State functions  **************************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+  * @{
+  */
+#define I2C_FLAG_MASK  ((uint32_t)0x0000FFFF)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macros I2C Private Macros
+  * @{
+  */
+
+#define I2C_FREQRANGE(__PCLK__)                            ((__PCLK__)/1000000)
+#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__)            (((__SPEED__) <= 100000) ? ((__FREQRANGE__) + 1) : ((((__FREQRANGE__) * 300) / 1000) + 1))
+#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__)            (((((__PCLK__)/((__SPEED__) << 1)) & I2C_CCR_CCR) < 4)? 4:((__PCLK__) / ((__SPEED__) << 1)))
+#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? ((__PCLK__) / ((__SPEED__) * 3)) : (((__PCLK__) / ((__SPEED__) * 25)) | I2C_DUTYCYCLE_16_9))
+#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__)      (((__SPEED__) <= 100000)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
+                                                                  ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0)? 1 : \
+                                                                  ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))
+
+#define I2C_7BIT_ADD_WRITE(__ADDRESS__)                    ((uint8_t)((__ADDRESS__) & (~I2C_OAR1_ADD0)))
+#define I2C_7BIT_ADD_READ(__ADDRESS__)                     ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0))
+
+#define I2C_10BIT_ADDRESS(__ADDRESS__)                     ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+#define I2C_10BIT_HEADER_WRITE(__ADDRESS__)                ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF0))))
+#define I2C_10BIT_HEADER_READ(__ADDRESS__)                 ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF1))))
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__)                       ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__)                       ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+
+/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters
+  * @{
+  */
+#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \
+                                  ((CYCLE) == I2C_DUTYCYCLE_16_9))
+#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \
+                                         ((ADDRESS) == I2C_ADDRESSINGMODE_10BIT))
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+                                      ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
+                                   ((CALL) == I2C_GENERALCALL_ENABLE))
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+                                    ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+                                  ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0) && ((SPEED) <= 400000))
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & (uint32_t)(0xFFFFFC00)) == 0)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & (uint32_t)(0xFFFFFF01)) == 0)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h
new file mode 100644
index 0000000..a67e4b7
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h
@@ -0,0 +1,136 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_i2c_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of I2C HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2C_EX_H
+#define __STM32F4xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2CEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2CEx_Exported_Constants I2C Exported Constants
+  * @{
+  */
+
+/** @defgroup I2CEx_Analog_Filter I2C Analog Filter
+  * @{
+  */
+#define I2C_ANALOGFILTER_ENABLE        ((uint32_t)0x00000000)
+#define I2C_ANALOGFILTER_DISABLE       I2C_FLTR_ANOFF
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2CEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1
+  * @{
+  */
+/* Peripheral Control functions  ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macros I2C Private Macros
+  * @{
+  */
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
+                                      ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+#define IS_I2C_DIGITAL_FILTER(FILTER)   ((FILTER) <= 0x0000000F)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_I2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h
new file mode 100644
index 0000000..b045de3
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h
@@ -0,0 +1,511 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_i2s.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of I2S HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2S_H
+#define __STM32F4xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2S
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Types I2S Exported Types
+  * @{
+  */
+
+/**
+  * @brief I2S Init structure definition
+  */
+typedef struct
+{
+  uint32_t Mode;         /*!< Specifies the I2S operating mode.
+                              This parameter can be a value of @ref I2S_Mode */
+
+  uint32_t Standard;     /*!< Specifies the standard used for the I2S communication.
+                              This parameter can be a value of @ref I2S_Standard */
+
+  uint32_t DataFormat;   /*!< Specifies the data format for the I2S communication.
+                              This parameter can be a value of @ref I2S_Data_Format */
+
+  uint32_t MCLKOutput;   /*!< Specifies whether the I2S MCLK output is enabled or not.
+                              This parameter can be a value of @ref I2S_MCLK_Output */
+
+  uint32_t AudioFreq;    /*!< Specifies the frequency selected for the I2S communication.
+                              This parameter can be a value of @ref I2S_Audio_Frequency */
+
+  uint32_t CPOL;         /*!< Specifies the idle state of the I2S clock.
+                              This parameter can be a value of @ref I2S_Clock_Polarity */
+
+  uint32_t ClockSource;  /*!< Specifies the I2S Clock Source.
+                              This parameter can be a value of @ref I2S_Clock_Source */
+
+  uint32_t FullDuplexMode;  /*!< Specifies the I2S FullDuplex mode.
+                                 This parameter can be a value of @ref I2S_FullDuplex_Mode */
+
+}I2S_InitTypeDef;
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_I2S_STATE_RESET      = 0x00,  /*!< I2S not yet initialized or disabled                */
+  HAL_I2S_STATE_READY      = 0x01,  /*!< I2S initialized and ready for use                  */
+  HAL_I2S_STATE_BUSY       = 0x02,  /*!< I2S internal process is ongoing                    */
+  HAL_I2S_STATE_BUSY_TX    = 0x12,  /*!< Data Transmission process is ongoing               */
+  HAL_I2S_STATE_BUSY_RX    = 0x22,  /*!< Data Reception process is ongoing                  */
+  HAL_I2S_STATE_BUSY_TX_RX = 0x32,  /*!< Data Transmission and Reception process is ongoing */
+  HAL_I2S_STATE_TIMEOUT    = 0x03,  /*!< I2S timeout state                                  */
+  HAL_I2S_STATE_ERROR      = 0x04   /*!< I2S error state                                    */
+
+}HAL_I2S_StateTypeDef;
+
+/**
+  * @brief I2S handle Structure definition
+  */
+typedef struct
+{
+  SPI_TypeDef                *Instance;    /* I2S registers base address        */
+
+  I2S_InitTypeDef            Init;         /* I2S communication parameters      */
+
+  uint16_t                   *pTxBuffPtr;  /* Pointer to I2S Tx transfer buffer */
+
+  __IO uint16_t              TxXferSize;   /* I2S Tx transfer size              */
+
+  __IO uint16_t              TxXferCount;  /* I2S Tx transfer Counter           */
+
+  uint16_t                   *pRxBuffPtr;  /* Pointer to I2S Rx transfer buffer */
+
+  __IO uint16_t              RxXferSize;   /* I2S Rx transfer size              */
+
+  __IO uint16_t              RxXferCount;  /* I2S Rx transfer counter           */
+
+  DMA_HandleTypeDef          *hdmatx;      /* I2S Tx DMA handle parameters      */
+
+  DMA_HandleTypeDef          *hdmarx;      /* I2S Rx DMA handle parameters      */
+
+  __IO HAL_LockTypeDef       Lock;         /* I2S locking object                */
+
+  __IO HAL_I2S_StateTypeDef  State;        /* I2S communication state           */
+
+  __IO uint32_t              ErrorCode;    /* I2S Error code                    */
+
+}I2S_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
+  * @{
+  */
+
+/** @defgroup I2S_Error_Code I2S Error Code
+  * @brief    I2S Error Code
+  * @{
+  */
+#define HAL_I2S_ERROR_NONE          ((uint32_t)0x00000000)    /*!< No error                    */
+#define HAL_I2S_ERROR_UDR           ((uint32_t)0x00000001)    /*!< I2S Underrun error          */
+#define HAL_I2S_ERROR_OVR           ((uint32_t)0x00000002)    /*!< I2S Overrun error           */
+#define HAL_I2SEX_ERROR_UDR         ((uint32_t)0x00000004)    /*!< I2S extended Underrun error */
+#define HAL_I2SEX_ERROR_OVR         ((uint32_t)0x00000008)    /*!< I2S extended Overrun error  */
+#define HAL_I2S_ERROR_FRE           ((uint32_t)0x00000010)    /*!< I2S Frame format error      */
+#define HAL_I2S_ERROR_DMA           ((uint32_t)0x00000020)    /*!< DMA transfer error          */
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Clock_Source I2S Clock Source
+  * @{
+  */
+#define I2S_CLOCK_PLL                     ((uint32_t)0x00000000)
+#define I2S_CLOCK_EXTERNAL                ((uint32_t)0x00000001)
+#define I2S_CLOCK_PLLR                    ((uint32_t)0x00000002)
+#define I2S_CLOCK_PLLSRC                  ((uint32_t)0x00000003)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Mode I2S Mode
+  * @{
+  */
+#define I2S_MODE_SLAVE_TX                ((uint32_t)0x00000000)
+#define I2S_MODE_SLAVE_RX                ((uint32_t)0x00000100)
+#define I2S_MODE_MASTER_TX               ((uint32_t)0x00000200)
+#define I2S_MODE_MASTER_RX               ((uint32_t)0x00000300)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Standard I2S Standard
+  * @{
+  */
+#define I2S_STANDARD_PHILIPS             ((uint32_t)0x00000000)
+#define I2S_STANDARD_MSB                 ((uint32_t)0x00000010)
+#define I2S_STANDARD_LSB                 ((uint32_t)0x00000020)
+#define I2S_STANDARD_PCM_SHORT           ((uint32_t)0x00000030)
+#define I2S_STANDARD_PCM_LONG            ((uint32_t)0x000000B0)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Data_Format I2S Data Format
+  * @{
+  */
+#define I2S_DATAFORMAT_16B               ((uint32_t)0x00000000)
+#define I2S_DATAFORMAT_16B_EXTENDED      ((uint32_t)0x00000001)
+#define I2S_DATAFORMAT_24B               ((uint32_t)0x00000003)
+#define I2S_DATAFORMAT_32B               ((uint32_t)0x00000005)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_MCLK_Output I2S Mclk Output
+  * @{
+  */
+#define I2S_MCLKOUTPUT_ENABLE           ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE          ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+  * @{
+  */
+#define I2S_AUDIOFREQ_192K               ((uint32_t)192000)
+#define I2S_AUDIOFREQ_96K                ((uint32_t)96000)
+#define I2S_AUDIOFREQ_48K                ((uint32_t)48000)
+#define I2S_AUDIOFREQ_44K                ((uint32_t)44100)
+#define I2S_AUDIOFREQ_32K                ((uint32_t)32000)
+#define I2S_AUDIOFREQ_22K                ((uint32_t)22050)
+#define I2S_AUDIOFREQ_16K                ((uint32_t)16000)
+#define I2S_AUDIOFREQ_11K                ((uint32_t)11025)
+#define I2S_AUDIOFREQ_8K                 ((uint32_t)8000)
+#define I2S_AUDIOFREQ_DEFAULT            ((uint32_t)2)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_FullDuplex_Mode I2S FullDuplex Mode
+  * @{
+  */
+#define I2S_FULLDUPLEXMODE_DISABLE                   ((uint32_t)0x00000000)
+#define I2S_FULLDUPLEXMODE_ENABLE                    ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Clock_Polarity  I2S Clock Polarity
+  * @{
+  */
+#define I2S_CPOL_LOW                    ((uint32_t)0x00000000)
+#define I2S_CPOL_HIGH                   ((uint32_t)SPI_I2SCFGR_CKPOL)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
+  * @{
+  */
+#define I2S_IT_TXE                      SPI_CR2_TXEIE
+#define I2S_IT_RXNE                     SPI_CR2_RXNEIE
+#define I2S_IT_ERR                      SPI_CR2_ERRIE
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Flags_Definition I2S Flags Definition
+  * @{
+  */
+#define I2S_FLAG_TXE                    SPI_SR_TXE
+#define I2S_FLAG_RXNE                   SPI_SR_RXNE
+
+#define I2S_FLAG_UDR                    SPI_SR_UDR
+#define I2S_FLAG_OVR                    SPI_SR_OVR
+#define I2S_FLAG_FRE                    SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE                 SPI_SR_CHSIDE
+#define I2S_FLAG_BSY                    SPI_SR_BSY
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Macros I2S Exported Macros
+  * @{
+  */
+
+/** @brief Reset I2S handle state
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief  Enable or disable the specified SPI peripheral (in I2S mode).
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
+
+/** @brief  Enable or disable the specified I2S interrupts.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg I2S_IT_ERR: Error interrupt enable
+  * @retval None
+  */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= ~(__INTERRUPT__))
+
+/** @brief  Checks if the specified I2S interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  *         This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+  * @param  __INTERRUPT__: specifies the I2S interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg I2S_IT_ERR: Error interrupt enable
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks whether the specified I2S flag is set or not.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+  *            @arg I2S_FLAG_TXE: Transmit buffer empty flag
+  *            @arg I2S_FLAG_UDR: Underrun flag
+  *            @arg I2S_FLAG_OVR: Overrun flag
+  *            @arg I2S_FLAG_FRE: Frame error flag
+  *            @arg I2S_FLAG_CHSIDE: Channel Side flag
+  *            @arg I2S_FLAG_BSY: Busy flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__)     \
+  do{                                           \
+    __IO uint32_t tmpreg;                       \
+    tmpreg = (__HANDLE__)->Instance->DR;        \
+    tmpreg = (__HANDLE__)->Instance->SR;        \
+    UNUSED(tmpreg);                             \
+  } while(0)
+
+/** @brief Clears the I2S UDR pending flag.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)     \
+  do{                                             \
+  __IO uint32_t tmpreg;                         \
+  tmpreg = (__HANDLE__)->Instance->SR;          \
+  UNUSED(tmpreg);                               \
+  } while(0)
+/**
+  * @}
+  */
+
+/* Include I2S Extension module */
+#include "stm32f4xx_hal_i2s_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup I2S_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/** @addtogroup I2S_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions  *****************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Peripheral Control and State functions  **************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2S_Private_Constants I2S Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2S_Private_Macros I2S Private Macros
+  * @{
+  */
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) || \
+                                   ((CLOCK) == I2S_CLOCK_PLLR)     ||\
+                                   ((CLOCK) == I2S_CLOCK_PLLSRC)   ||\
+                                   ((CLOCK) == I2S_CLOCK_PLL))
+
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX)  || \
+                           ((MODE) == I2S_MODE_SLAVE_RX)  || \
+                           ((MODE) == I2S_MODE_MASTER_TX) || \
+                           ((MODE) == I2S_MODE_MASTER_RX))
+
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS)   || \
+                                   ((STANDARD) == I2S_STANDARD_MSB)       || \
+                                   ((STANDARD) == I2S_STANDARD_LSB)       || \
+                                   ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+                                   ((STANDARD) == I2S_STANDARD_PCM_LONG))
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B)          || \
+                                    ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+                                    ((FORMAT) == I2S_DATAFORMAT_24B)          || \
+                                    ((FORMAT) == I2S_DATAFORMAT_32B))
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+                                    ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
+                                  ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+                                  ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+
+#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \
+                                      ((MODE) == I2S_FULLDUPLEXMODE_ENABLE))
+
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+                           ((CPOL) == I2S_CPOL_HIGH))
+
+#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2S_Private_Functions I2S Private Functions
+  * @{
+  */
+void              I2S_DMATxCplt(DMA_HandleTypeDef *hdma);
+void              I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+void              I2S_DMARxCplt(DMA_HandleTypeDef *hdma);
+void              I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+void              I2S_DMAError(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout);
+HAL_StatusTypeDef I2S_Transmit_IT(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef I2S_Receive_IT(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h
new file mode 100644
index 0000000..44c47f1
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h
@@ -0,0 +1,148 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_i2s_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of I2S HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2S_EX_H
+#define __STM32F4xx_HAL_I2S_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2SEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Types I2S Exported Types
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Constants I2S Exported Constants
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Macros I2S Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2SEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup I2SEx_Exported_Functions_Group1
+  * @{
+  */
+
+/* Extended features functions **************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2SEx_Private_Constants I2S Private Constants
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2SEx_Private_Macros I2S Private Macros
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2SEx_Private_Functions I2S Private Functions
+  * @{
+  */
+HAL_StatusTypeDef I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s);
+uint32_t I2S_GetInputClock(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2S_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_irda.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_irda.h
new file mode 100644
index 0000000..e7491ab
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_irda.h
@@ -0,0 +1,538 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_irda.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of IRDA HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_IRDA_H
+#define __STM32F4xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup IRDA
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Types IRDA Exported Types
+  * @{
+  */
+/**
+  * @brief IRDA Init Structure definition
+  */
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< This member configures the IRDA communication baud rate.
+                                           The baud rate is computed using the following formula:
+                                           - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
+                                           - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter can be a value of @ref IRDA_Word_Length */
+
+
+  uint32_t Parity;                   /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref IRDA_Parity
+                                           @note When parity is enabled, the computed parity is inserted
+                                                 at the MSB position of the transmitted data (9th bit when
+                                                 the word length is set to 9 data bits; 8th bit when the
+                                                 word length is set to 8 data bits). */
+
+  uint32_t Mode;                      /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref IRDA_Mode */
+
+  uint8_t  Prescaler;                 /*!< Specifies the Prescaler */
+
+  uint32_t IrDAMode;                  /*!< Specifies the IrDA mode
+                                           This parameter can be a value of @ref IRDA_Low_Power */
+}IRDA_InitTypeDef;
+
+/**
+  * @brief HAL State structures definition
+  */
+typedef enum
+{
+  HAL_IRDA_STATE_RESET             = 0x00,    /*!< Peripheral is not yet Initialized */
+  HAL_IRDA_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use */
+  HAL_IRDA_STATE_BUSY              = 0x02,    /*!< An internal process is ongoing */
+  HAL_IRDA_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing */
+  HAL_IRDA_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing */
+  HAL_IRDA_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission and Reception process is ongoing */
+  HAL_IRDA_STATE_TIMEOUT           = 0x03,    /*!< Timeout state */
+  HAL_IRDA_STATE_ERROR             = 0x04     /*!< Error */
+}HAL_IRDA_StateTypeDef;
+
+/**
+  * @brief IRDA handle Structure definition
+  */
+typedef struct
+{
+  USART_TypeDef               *Instance;        /* USART registers base address       */
+
+  IRDA_InitTypeDef            Init;             /* IRDA communication parameters      */
+
+  uint8_t                     *pTxBuffPtr;      /* Pointer to IRDA Tx transfer Buffer */
+
+  uint16_t                    TxXferSize;       /* IRDA Tx Transfer size              */
+
+  uint16_t                    TxXferCount;      /* IRDA Tx Transfer Counter           */
+
+  uint8_t                     *pRxBuffPtr;      /* Pointer to IRDA Rx transfer Buffer */
+
+  uint16_t                    RxXferSize;       /* IRDA Rx Transfer size              */
+
+  uint16_t                    RxXferCount;      /* IRDA Rx Transfer Counter           */
+
+  DMA_HandleTypeDef           *hdmatx;          /* IRDA Tx DMA Handle parameters      */
+
+  DMA_HandleTypeDef           *hdmarx;          /* IRDA Rx DMA Handle parameters      */
+
+  HAL_LockTypeDef             Lock;             /* Locking object                     */
+
+  __IO HAL_IRDA_StateTypeDef  State;            /* IRDA communication state           */
+
+  __IO uint32_t               ErrorCode;        /* IRDA Error code                    */
+
+}IRDA_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported constants
+  * @{
+  */
+/** @defgroup IRDA_Error_Code IRDA Error Code
+  * @brief    IRDA Error Code
+  * @{
+  */
+#define HAL_IRDA_ERROR_NONE         ((uint32_t)0x00000000)   /*!< No error            */
+#define HAL_IRDA_ERROR_PE           ((uint32_t)0x00000001)   /*!< Parity error        */
+#define HAL_IRDA_ERROR_NE           ((uint32_t)0x00000002)   /*!< Noise error         */
+#define HAL_IRDA_ERROR_FE           ((uint32_t)0x00000004)   /*!< Frame error         */
+#define HAL_IRDA_ERROR_ORE          ((uint32_t)0x00000008)   /*!< Overrun error       */
+#define HAL_IRDA_ERROR_DMA          ((uint32_t)0x00000010)   /*!< DMA transfer error  */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Word_Length IRDA Word Length
+  * @{
+  */
+#define IRDA_WORDLENGTH_8B                  ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M)
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Parity  IRDA Parity
+  * @{
+  */
+#define IRDA_PARITY_NONE                    ((uint32_t)0x00000000)
+#define IRDA_PARITY_EVEN                    ((uint32_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD                     ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Mode IRDA Transfer Mode
+  * @{
+  */
+#define IRDA_MODE_RX                        ((uint32_t)USART_CR1_RE)
+#define IRDA_MODE_TX                        ((uint32_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX                     ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+  * @{
+  */
+#define IRDA_POWERMODE_LOWPOWER                  ((uint32_t)USART_CR3_IRLP)
+#define IRDA_POWERMODE_NORMAL                    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Flags IRDA Flags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the SR register
+  * @{
+  */
+#define IRDA_FLAG_TXE                       ((uint32_t)0x00000080)
+#define IRDA_FLAG_TC                        ((uint32_t)0x00000040)
+#define IRDA_FLAG_RXNE                      ((uint32_t)0x00000020)
+#define IRDA_FLAG_IDLE                      ((uint32_t)0x00000010)
+#define IRDA_FLAG_ORE                       ((uint32_t)0x00000008)
+#define IRDA_FLAG_NE                        ((uint32_t)0x00000004)
+#define IRDA_FLAG_FE                        ((uint32_t)0x00000002)
+#define IRDA_FLAG_PE                        ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definitions
+  *        Elements values convention: 0xY000XXXX
+  *           - XXXX  : Interrupt mask in the XX register
+  *           - Y  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR2 register
+  *                 - 11: CR3 register
+  * @{
+  */
+#define IRDA_IT_PE                          ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_PEIE))
+#define IRDA_IT_TXE                         ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_TXEIE))
+#define IRDA_IT_TC                          ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_TCIE))
+#define IRDA_IT_RXNE                        ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE))
+#define IRDA_IT_IDLE                        ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE))
+
+#define IRDA_IT_LBD                         ((uint32_t)(IRDA_CR2_REG_INDEX << 28 | USART_CR2_LBDIE))
+
+#define IRDA_IT_CTS                         ((uint32_t)(IRDA_CR3_REG_INDEX << 28 | USART_CR3_CTSIE))
+#define IRDA_IT_ERR                         ((uint32_t)(IRDA_CR3_REG_INDEX << 28 | USART_CR3_EIE))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
+  * @{
+  */
+
+/** @brief Reset IRDA handle state
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET)
+
+/** @brief  Flushs the IRDA DR register
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  */
+#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief  Checks whether the specified IRDA flag is set or not.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg IRDA_FLAG_TXE:  Transmit data register empty flag
+  *            @arg IRDA_FLAG_TC:   Transmission Complete flag
+  *            @arg IRDA_FLAG_RXNE: Receive data register not empty flag
+  *            @arg IRDA_FLAG_IDLE: Idle Line detection flag
+  *            @arg IRDA_FLAG_ORE:  OverRun Error flag
+  *            @arg IRDA_FLAG_NE:   Noise Error flag
+  *            @arg IRDA_FLAG_FE:   Framing Error flag
+  *            @arg IRDA_FLAG_PE:   Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clears the specified IRDA pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @param  __FLAG__: specifies the flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg IRDA_FLAG_TC:   Transmission Complete flag.
+  *            @arg IRDA_FLAG_RXNE: Receive data register not empty flag.
+  *
+  * @note   PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+  *          error) and IDLE (Idle line detected) flags are cleared by software
+  *          sequence: a read operation to USART_SR register followed by a read
+  *          operation to USART_DR register.
+  * @note   RXNE flag can be also cleared by a read to the USART_DR register.
+  * @note   TC flag can be also cleared by software sequence: a read operation to
+  *          USART_SR register followed by a write operation to USART_DR register.
+  * @note   TXE flag is cleared only by a write to the USART_DR register.
+  *
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief  Clear the IRDA PE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)     \
+  do{                                           \
+    __IO uint32_t tmpreg;                       \
+    tmpreg = (__HANDLE__)->Instance->SR;        \
+    UNUSED(tmpreg);                             \
+  } while(0)
+
+/** @brief  Clear the IRDA FE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the IRDA NE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the IRDA ORE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the IRDA IDLE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Enables or disables the specified IRDA interrupt.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @param  __INTERRUPT__: specifies the IRDA interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg IRDA_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg IRDA_IT_TC:   Transmission complete interrupt
+  *            @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg IRDA_IT_IDLE: Idle line detection interrupt
+  *            @arg IRDA_IT_PE:   Parity Error interrupt
+  *            @arg IRDA_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
+                                                           (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |=  ((__INTERRUPT__) & IRDA_IT_MASK)): \
+                                                        ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK)))
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+                                                           (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+                                                           ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK)))
+
+/** @brief  Checks whether the specified IRDA interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @param  __IT__: specifies the IRDA interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg IRDA_IT_TC:  Transmission complete interrupt
+  *            @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg IRDA_IT_IDLE: Idle line detection interrupt
+  *            @arg USART_IT_ERR: Error interrupt
+  *            @arg IRDA_IT_PE: Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
+                                                      (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK))
+
+/** @brief  Macro to enable the IRDA's one bit sample method
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  * @retval None
+  */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief  Macro to disable the IRDA's one bit sample method
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  * @retval None
+  */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief  Enable UART/USART associated to IRDA Handle
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_IRDA_ENABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR1 |=  USART_CR1_UE)
+
+/** @brief  Disable UART/USART associated to IRDA Handle
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  *         IRDA Handle selects the USARTx or UARTy peripheral
+  *         (USART,UART availability and x,y values depending on device).
+  * @retval None
+  */
+#define __HAL_IRDA_DISABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR1 &=  ~USART_CR1_UE)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup IRDA_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup IRDA_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+/**
+  * @}
+  */
+
+/** @addtogroup IRDA_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+/**
+  * @}
+  */
+
+/** @addtogroup IRDA_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  **************************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IRDA_Private_Constants IRDA Private Constants
+  * @{
+  */
+
+/** @brief IRDA interruptions flag mask
+  *
+  */
+#define IRDA_IT_MASK  ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+                                  USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
+
+
+#define IRDA_CR1_REG_INDEX                  1
+#define IRDA_CR2_REG_INDEX                  2
+#define IRDA_CR3_REG_INDEX                  3
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup IRDA_Private_Macros   IRDA Private Macros
+  * @{
+  */
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \
+                                     ((LENGTH) == IRDA_WORDLENGTH_9B))
+#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
+                                ((PARITY) == IRDA_PARITY_EVEN) || \
+                                ((PARITY) == IRDA_PARITY_ODD))
+#define IS_IRDA_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
+#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
+                                 ((MODE) == IRDA_POWERMODE_NORMAL))
+#define IS_IRDA_BAUDRATE(BAUDRATE) ((BAUDRATE) < 115201)
+
+#define IRDA_DIV(_PCLK_, _BAUD_)                  (((_PCLK_)*25)/(4*(_BAUD_)))
+#define IRDA_DIVMANT(_PCLK_, _BAUD_)              (IRDA_DIV((_PCLK_), (_BAUD_))/100)
+#define IRDA_DIVFRAQ(_PCLK_, _BAUD_)              (((IRDA_DIV((_PCLK_), (_BAUD_)) - (IRDA_DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define IRDA_BRR(_PCLK_, _BAUD_)                  ((IRDA_DIVMANT((_PCLK_), (_BAUD_)) << 4)|(IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup IRDA_Private_Functions IRDA Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h
new file mode 100644
index 0000000..81362d1
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h
@@ -0,0 +1,288 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_iwdg.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of IWDG HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_IWDG_H
+#define __STM32F4xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup IWDG
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Types IWDG Exported Types
+  * @{
+  */
+
+/**
+  * @brief  IWDG HAL State Structure definition
+  */
+typedef enum
+{
+  HAL_IWDG_STATE_RESET     = 0x00,  /*!< IWDG not yet initialized or disabled */
+  HAL_IWDG_STATE_READY     = 0x01,  /*!< IWDG initialized and ready for use   */
+  HAL_IWDG_STATE_BUSY      = 0x02,  /*!< IWDG internal process is ongoing     */
+  HAL_IWDG_STATE_TIMEOUT   = 0x03,  /*!< IWDG timeout state                   */
+  HAL_IWDG_STATE_ERROR     = 0x04   /*!< IWDG error state                     */
+}HAL_IWDG_StateTypeDef;
+
+/**
+  * @brief  IWDG Init structure definition
+  */
+typedef struct
+{
+  uint32_t Prescaler;  /*!< Select the prescaler of the IWDG.
+                            This parameter can be a value of @ref IWDG_Prescaler */
+
+  uint32_t Reload;     /*!< Specifies the IWDG down-counter reload value.
+                            This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+}IWDG_InitTypeDef;
+
+/**
+  * @brief  IWDG Handle Structure definition
+  */
+typedef struct
+{
+  IWDG_TypeDef                 *Instance;  /*!< Register base address    */
+
+  IWDG_InitTypeDef             Init;       /*!< IWDG required parameters */
+
+  HAL_LockTypeDef              Lock;       /*!< IWDG Locking object      */
+
+  __IO HAL_IWDG_StateTypeDef   State;      /*!< IWDG communication state */
+}IWDG_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
+  * @{
+  */
+
+/** @defgroup IWDG_Registers_BitMask IWDG Registers BitMask
+  * @brief IWDG registers bit mask
+  * @{
+  */
+/* --- KR Register ---*/
+/* KR register bit mask */
+#define IWDG_KEY_RELOAD                            ((uint32_t)0xAAAA)  /*!< IWDG Reload Counter Enable   */
+#define IWDG_KEY_ENABLE                            ((uint32_t)0xCCCC)  /*!< IWDG Peripheral Enable       */
+#define IWDG_KEY_WRITE_ACCESS_ENABLE               ((uint32_t)0x5555)  /*!< IWDG KR Write Access Enable  */
+#define IWDG_KEY_WRITE_ACCESS_DISABLE              ((uint32_t)0x0000)  /*!< IWDG KR Write Access Disable */
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Flag_definition IWDG Flag definition
+  * @{
+  */
+#define IWDG_FLAG_PVU   ((uint32_t)IWDG_SR_PVU)  /*!< Watchdog counter prescaler value update Flag */
+#define IWDG_FLAG_RVU   ((uint32_t)IWDG_SR_RVU)  /*!< Watchdog counter reload value update Flag    */
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Prescaler IWDG Prescaler
+  * @{
+  */
+#define IWDG_PRESCALER_4     ((uint8_t)0x00)  /*!< IWDG prescaler set to 4   */
+#define IWDG_PRESCALER_8     ((uint8_t)(IWDG_PR_PR_0))                  /*!< IWDG prescaler set to 8   */
+#define IWDG_PRESCALER_16    ((uint8_t)(IWDG_PR_PR_1))                  /*!< IWDG prescaler set to 16  */
+#define IWDG_PRESCALER_32    ((uint8_t)(IWDG_PR_PR_1 | IWDG_PR_PR_0))   /*!< IWDG prescaler set to 32  */
+#define IWDG_PRESCALER_64    ((uint8_t)(IWDG_PR_PR_2))                  /*!< IWDG prescaler set to 64  */
+#define IWDG_PRESCALER_128   ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_0))   /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256   ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_1))   /*!< IWDG prescaler set to 256 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
+  * @{
+  */
+
+/** @brief Reset IWDG handle state
+  * @param  __HANDLE__: IWDG handle.
+  * @retval None
+  */
+#define __HAL_IWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IWDG_STATE_RESET)
+
+/**
+  * @brief  Enables the IWDG peripheral.
+  * @param  __HANDLE__: IWDG handle
+  * @retval None
+  */
+#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE)
+
+/**
+  * @brief  Reloads IWDG counter with value defined in the reload register
+  *         (write access to IWDG_PR and IWDG_RLR registers disabled).
+  * @param  __HANDLE__: IWDG handle
+  * @retval None
+  */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD)
+
+/**
+  * @brief  Gets the selected IWDG's flag status.
+  * @param  __HANDLE__: IWDG handle
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg IWDG_FLAG_PVU: Watchdog counter reload value update flag
+  *            @arg IWDG_FLAG_RVU: Watchdog counter prescaler value flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_IWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup IWDG_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup IWDG_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg);
+/**
+  * @}
+  */
+
+/** @addtogroup IWDG_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+/**
+  * @}
+  */
+
+/** @addtogroup IWDG_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  ************************************************/
+HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup IWDG_Private_Macros IWDG Private Macros
+  * @{
+  */
+
+/**
+  * @brief  Enables write access to IWDG_PR and IWDG_RLR registers.
+  * @param  __HANDLE__: IWDG handle
+  * @retval None
+  */
+#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE)
+
+/**
+  * @brief  Disables write access to IWDG_PR and IWDG_RLR registers.
+  * @param  __HANDLE__: IWDG handle
+  * @retval None
+  */
+#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE)
+
+
+#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4)  || \
+                                          ((__PRESCALER__) == IWDG_PRESCALER_8)  || \
+                                          ((__PRESCALER__) == IWDG_PRESCALER_16) || \
+                                          ((__PRESCALER__) == IWDG_PRESCALER_32) || \
+                                          ((__PRESCALER__) == IWDG_PRESCALER_64) || \
+                                          ((__PRESCALER__) == IWDG_PRESCALER_128)|| \
+                                          ((__PRESCALER__) == IWDG_PRESCALER_256))
+
+
+#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= 0xFFF)
+
+/**
+  * @}
+  */
+
+/* Private define ------------------------------------------------------------*/
+ /** @defgroup IWDG_Private_Constants IWDG Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h
new file mode 100644
index 0000000..9bb3a68
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h
@@ -0,0 +1,631 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_ltdc.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of LTDC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_LTDC_H
+#define __STM32F4xx_HAL_LTDC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup LTDC LTDC
+  * @brief LTDC HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Types LTDC Exported Types
+  * @{
+  */
+#define MAX_LAYER  2
+
+/**
+  * @brief  LTDC color structure definition
+  */
+typedef struct
+{
+  uint8_t Blue;                    /*!< Configures the blue value.
+                                        This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint8_t Green;                   /*!< Configures the green value.
+                                        This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint8_t Red;                     /*!< Configures the red value.
+                                        This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint8_t Reserved;                /*!< Reserved 0xFF */
+} LTDC_ColorTypeDef;
+
+/**
+  * @brief  LTDC Init structure definition
+  */
+typedef struct
+{
+  uint32_t            HSPolarity;                /*!< configures the horizontal synchronization polarity.
+                                                      This parameter can be one value of @ref LTDC_HS_POLARITY */
+
+  uint32_t            VSPolarity;                /*!< configures the vertical synchronization polarity.
+                                                      This parameter can be one value of @ref LTDC_VS_POLARITY */
+
+  uint32_t            DEPolarity;                /*!< configures the data enable polarity.
+                                                      This parameter can be one of value of @ref LTDC_DE_POLARITY */
+
+  uint32_t            PCPolarity;                /*!< configures the pixel clock polarity.
+                                                      This parameter can be one of value of @ref LTDC_PC_POLARITY */
+
+  uint32_t            HorizontalSync;            /*!< configures the number of Horizontal synchronization width.
+                                                      This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+  uint32_t            VerticalSync;              /*!< configures the number of Vertical synchronization height.
+                                                      This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+  uint32_t            AccumulatedHBP;            /*!< configures the accumulated horizontal back porch width.
+                                                      This parameter must be a number between Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */
+
+  uint32_t            AccumulatedVBP;            /*!< configures the accumulated vertical back porch height.
+                                                      This parameter must be a number between Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */
+
+  uint32_t            AccumulatedActiveW;        /*!< configures the accumulated active width.
+                                                      This parameter must be a number between Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */
+
+  uint32_t            AccumulatedActiveH;        /*!< configures the accumulated active height.
+                                                      This parameter must be a number between Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */
+
+  uint32_t            TotalWidth;                /*!< configures the total width.
+                                                      This parameter must be a number between Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */
+
+  uint32_t            TotalHeigh;                /*!< configures the total height.
+                                                      This parameter must be a number between Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */
+
+  LTDC_ColorTypeDef   Backcolor;                 /*!< Configures the background color. */
+} LTDC_InitTypeDef;
+
+/**
+  * @brief  LTDC Layer structure definition
+  */
+typedef struct
+{
+  uint32_t WindowX0;                   /*!< Configures the Window Horizontal Start Position.
+                                            This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+  uint32_t WindowX1;                   /*!< Configures the Window Horizontal Stop Position.
+                                            This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+  uint32_t WindowY0;                   /*!< Configures the Window vertical Start Position.
+                                            This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+  uint32_t WindowY1;                   /*!< Configures the Window vertical Stop Position.
+                                            This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+  uint32_t PixelFormat;                /*!< Specifies the pixel format.
+                                            This parameter can be one of value of @ref LTDC_Pixelformat */
+
+  uint32_t Alpha;                      /*!< Specifies the constant alpha used for blending.
+                                            This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint32_t Alpha0;                     /*!< Configures the default alpha value.
+                                            This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint32_t BlendingFactor1;            /*!< Select the blending factor 1.
+                                            This parameter can be one of value of @ref LTDC_BlendingFactor1 */
+
+  uint32_t BlendingFactor2;            /*!< Select the blending factor 2.
+                                            This parameter can be one of value of @ref LTDC_BlendingFactor2 */
+
+  uint32_t FBStartAdress;              /*!< Configures the color frame buffer address */
+
+  uint32_t ImageWidth;                 /*!< Configures the color frame buffer line length.
+                                            This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x1FFF. */
+
+  uint32_t ImageHeight;                /*!< Specifies the number of line in frame buffer.
+                                            This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+  LTDC_ColorTypeDef   Backcolor;       /*!< Configures the layer background color. */
+} LTDC_LayerCfgTypeDef;
+
+/**
+  * @brief  HAL LTDC State structures definition
+  */
+typedef enum
+{
+  HAL_LTDC_STATE_RESET             = 0x00,    /*!< LTDC not yet initialized or disabled */
+  HAL_LTDC_STATE_READY             = 0x01,    /*!< LTDC initialized and ready for use   */
+  HAL_LTDC_STATE_BUSY              = 0x02,    /*!< LTDC internal process is ongoing     */
+  HAL_LTDC_STATE_TIMEOUT           = 0x03,    /*!< LTDC Timeout state                   */
+  HAL_LTDC_STATE_ERROR             = 0x04     /*!< LTDC state error                     */
+}HAL_LTDC_StateTypeDef;
+
+/**
+  * @brief  LTDC handle Structure definition
+  */
+typedef struct
+{
+  LTDC_TypeDef                *Instance;                /*!< LTDC Register base address                */
+
+  LTDC_InitTypeDef            Init;                     /*!< LTDC parameters                           */
+
+  LTDC_LayerCfgTypeDef        LayerCfg[MAX_LAYER];      /*!< LTDC Layers parameters                    */
+
+  HAL_LockTypeDef             Lock;                     /*!< LTDC Lock                                 */
+
+  __IO HAL_LTDC_StateTypeDef  State;                    /*!< LTDC state                                */
+
+  __IO uint32_t               ErrorCode;                /*!< LTDC Error code                           */
+
+} LTDC_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Constants LTDC Exported Constants
+  * @{
+  */
+
+/** @defgroup LTDC_Error_Code LTDC Error Code
+  * @{
+  */
+#define HAL_LTDC_ERROR_NONE      ((uint32_t)0x00000000)    /*!< LTDC No error             */
+#define HAL_LTDC_ERROR_TE        ((uint32_t)0x00000001)    /*!< LTDC Transfer error       */
+#define HAL_LTDC_ERROR_FU        ((uint32_t)0x00000002)    /*!< LTDC FIFO Underrun        */
+#define HAL_LTDC_ERROR_TIMEOUT   ((uint32_t)0x00000020)    /*!< LTDC Timeout error        */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_HS_POLARITY LTDC HS POLARITY
+  * @{
+  */
+#define LTDC_HSPOLARITY_AL                ((uint32_t)0x00000000)                /*!< Horizontal Synchronization is active low. */
+#define LTDC_HSPOLARITY_AH                LTDC_GCR_HSPOL                        /*!< Horizontal Synchronization is active high. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_VS_POLARITY LTDC VS POLARITY
+  * @{
+  */
+#define LTDC_VSPOLARITY_AL                ((uint32_t)0x00000000)                /*!< Vertical Synchronization is active low. */
+#define LTDC_VSPOLARITY_AH                LTDC_GCR_VSPOL                        /*!< Vertical Synchronization is active high. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_DE_POLARITY LTDC DE POLARITY
+  * @{
+  */
+#define LTDC_DEPOLARITY_AL                ((uint32_t)0x00000000)                /*!< Data Enable, is active low. */
+#define LTDC_DEPOLARITY_AH                LTDC_GCR_DEPOL                        /*!< Data Enable, is active high. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_PC_POLARITY LTDC PC POLARITY
+  * @{
+  */
+#define LTDC_PCPOLARITY_IPC               ((uint32_t)0x00000000)                /*!< input pixel clock. */
+#define LTDC_PCPOLARITY_IIPC              LTDC_GCR_PCPOL                        /*!< inverted input pixel clock. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_SYNC LTDC SYNC
+  * @{
+  */
+#define LTDC_HORIZONTALSYNC               (LTDC_SSCR_HSW >> 16)                 /*!< Horizontal synchronization width. */
+#define LTDC_VERTICALSYNC                 LTDC_SSCR_VSH                         /*!< Vertical synchronization height. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_BACK_COLOR LTDC BACK COLOR
+  * @{
+  */
+#define LTDC_COLOR                   ((uint32_t)0x000000FF)                     /*!< Color mask */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_BlendingFactor1 LTDC Blending Factor1
+  * @{
+  */
+#define LTDC_BLENDING_FACTOR1_CA                       ((uint32_t)0x00000400)   /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR1_PAxCA                    ((uint32_t)0x00000600)   /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_BlendingFactor2 LTDC Blending Factor2
+  * @{
+  */
+#define LTDC_BLENDING_FACTOR2_CA                       ((uint32_t)0x00000005)   /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR2_PAxCA                    ((uint32_t)0x00000007)   /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Pixelformat LTDC Pixel format
+  * @{
+  */
+#define LTDC_PIXEL_FORMAT_ARGB8888                  ((uint32_t)0x00000000)      /*!< ARGB8888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB888                    ((uint32_t)0x00000001)      /*!< RGB888 LTDC pixel format   */
+#define LTDC_PIXEL_FORMAT_RGB565                    ((uint32_t)0x00000002)      /*!< RGB565 LTDC pixel format   */
+#define LTDC_PIXEL_FORMAT_ARGB1555                  ((uint32_t)0x00000003)      /*!< ARGB1555 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB4444                  ((uint32_t)0x00000004)      /*!< ARGB4444 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_L8                        ((uint32_t)0x00000005)      /*!< L8 LTDC pixel format       */
+#define LTDC_PIXEL_FORMAT_AL44                      ((uint32_t)0x00000006)      /*!< AL44 LTDC pixel format     */
+#define LTDC_PIXEL_FORMAT_AL88                      ((uint32_t)0x00000007)      /*!< AL88 LTDC pixel format     */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Alpha LTDC Alpha
+  * @{
+  */
+#define LTDC_ALPHA               LTDC_LxCACR_CONSTA                             /*!< LTDC Cte Alpha mask */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_LAYER_Config LTDC LAYER Config
+  * @{
+  */
+#define LTDC_STOPPOSITION                 (LTDC_LxWHPCR_WHSPPOS >> 16)          /*!< LTDC Layer stop position  */
+#define LTDC_STARTPOSITION                LTDC_LxWHPCR_WHSTPOS                  /*!< LTDC Layer start position */
+
+#define LTDC_COLOR_FRAME_BUFFER           LTDC_LxCFBLR_CFBLL                    /*!< LTDC Layer Line length    */
+#define LTDC_LINE_NUMBER                  LTDC_LxCFBLNR_CFBLNBR                 /*!< LTDC Layer Line number    */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Interrupts LTDC Interrupts
+  * @{
+  */
+#define LTDC_IT_LI                      LTDC_IER_LIE
+#define LTDC_IT_FU                      LTDC_IER_FUIE
+#define LTDC_IT_TE                      LTDC_IER_TERRIE
+#define LTDC_IT_RR                      LTDC_IER_RRIE
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Flag LTDC Flag
+  * @{
+  */
+#define LTDC_FLAG_LI                     LTDC_ISR_LIF
+#define LTDC_FLAG_FU                     LTDC_ISR_FUIF
+#define LTDC_FLAG_TE                     LTDC_ISR_TERRIF
+#define LTDC_FLAG_RR                     LTDC_ISR_RRIF
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Macros LTDC Exported Macros
+  * @{
+  */
+
+/** @brief Reset LTDC handle state
+  * @param  __HANDLE__: specifies the LTDC handle.
+  * @retval None
+  */
+#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET)
+
+/**
+  * @brief  Enable the LTDC.
+  * @param  __HANDLE__: LTDC handle
+  * @retval None.
+  */
+#define __HAL_LTDC_ENABLE(__HANDLE__)    ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN)
+
+/**
+  * @brief  Disable the LTDC.
+  * @param  __HANDLE__: LTDC handle
+  * @retval None.
+  */
+#define __HAL_LTDC_DISABLE(__HANDLE__)   ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN))
+
+/**
+  * @brief  Enable the LTDC Layer.
+  * @param  __HANDLE__: LTDC handle
+  * @param  __LAYER__: Specify the layer to be enabled
+  *                     This parameter can be 0 or 1
+  * @retval None.
+  */
+#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__)  ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR |= (uint32_t)LTDC_LxCR_LEN)
+
+/**
+  * @brief  Disable the LTDC Layer.
+  * @param  __HANDLE__: LTDC handle
+  * @param  __LAYER__: Specify the layer to be disabled
+  *                     This parameter can be 0 or 1
+  * @retval None.
+  */
+#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR &= ~(uint32_t)LTDC_LxCR_LEN)
+
+/**
+  * @brief  Reload  Layer Configuration.
+  * @param  __HANDLE__: LTDC handle
+  * @retval None.
+  */
+#define __HAL_LTDC_RELOAD_CONFIG(__HANDLE__)   ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR)
+
+/* Interrupt & Flag management */
+/**
+  * @brief  Get the LTDC pending flags.
+  * @param  __HANDLE__: LTDC handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg LTDC_FLAG_LI: Line Interrupt flag
+  *            @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+  *            @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+  * @brief  Clears the LTDC pending flags.
+  * @param  __HANDLE__: LTDC handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg LTDC_FLAG_LI: Line Interrupt flag
+  *            @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+  *            @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+  * @retval None
+  */
+#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+  * @brief  Enables the specified LTDC interrupts.
+  * @param  __HANDLE__: LTDC handle
+  * @param __INTERRUPT__: specifies the LTDC interrupt sources to be enabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg LTDC_IT_LI: Line Interrupt flag
+  *            @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_IT_TE: Transfer Error interrupt flag
+  *            @arg LTDC_IT_RR: Register Reload Interrupt Flag
+  * @retval None
+  */
+#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified LTDC interrupts.
+  * @param  __HANDLE__: LTDC handle
+  * @param __INTERRUPT__: specifies the LTDC interrupt sources to be disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg LTDC_IT_LI: Line Interrupt flag
+  *            @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_IT_TE: Transfer Error interrupt flag
+  *            @arg LTDC_IT_RR: Register Reload Interrupt Flag
+  * @retval None
+  */
+#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified LTDC interrupt has occurred or not.
+  * @param  __HANDLE__: LTDC handle
+  * @param  __INTERRUPT__: specifies the LTDC interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg LTDC_IT_LI: Line Interrupt flag
+  *            @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_IT_TE: Transfer Error interrupt flag
+  *            @arg LTDC_IT_RR: Register Reload Interrupt Flag
+  * @retval The state of INTERRUPT (SET or RESET).
+  */
+#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup LTDC_Exported_Functions
+  * @{
+  */
+/** @addtogroup LTDC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_LineEvenCallback(LTDC_HandleTypeDef *hltdc);
+/**
+  * @}
+  */
+
+/** @addtogroup LTDC_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+void  HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc);
+/**
+  * @}
+  */
+
+/** @addtogroup LTDC_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line);
+HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc);
+/**
+  * @}
+  */
+
+/** @addtogroup LTDC_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral State functions *************************************************/
+HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc);
+uint32_t              HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/** @defgroup LTDC_Private_Types LTDC Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Variables LTDC Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Constants LTDC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup LTDC_Private_Macros LTDC Private Macros
+  * @{
+  */
+#define LTDC_LAYER(__HANDLE__, __LAYER__)         ((LTDC_Layer_TypeDef *)((uint32_t)(((uint32_t)((__HANDLE__)->Instance)) + 0x84 + (0x80*(__LAYER__)))))
+#define IS_LTDC_LAYER(LAYER)                      ((LAYER) <= MAX_LAYER)
+#define IS_LTDC_HSPOL(HSPOL)                      (((HSPOL) == LTDC_HSPOLARITY_AL) || \
+                                                   ((HSPOL) == LTDC_HSPOLARITY_AH))
+#define IS_LTDC_VSPOL(VSPOL)                      (((VSPOL) == LTDC_VSPOLARITY_AL) || \
+                                                   ((VSPOL) == LTDC_VSPOLARITY_AH))
+#define IS_LTDC_DEPOL(DEPOL)                      (((DEPOL) ==  LTDC_DEPOLARITY_AL) || \
+                                                   ((DEPOL) ==  LTDC_DEPOLARITY_AH))
+#define IS_LTDC_PCPOL(PCPOL)                      (((PCPOL) ==  LTDC_PCPOLARITY_IPC) || \
+                                                   ((PCPOL) ==  LTDC_PCPOLARITY_IIPC))
+#define IS_LTDC_HSYNC(HSYNC)                      ((HSYNC)  <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_VSYNC(VSYNC)                      ((VSYNC)  <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AHBP(AHBP)                        ((AHBP)   <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AVBP(AVBP)                        ((AVBP)   <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AAW(AAW)                          ((AAW)    <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AAH(AAH)                          ((AAH)    <= LTDC_VERTICALSYNC)
+#define IS_LTDC_TOTALW(TOTALW)                    ((TOTALW) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_TOTALH(TOTALH)                    ((TOTALH) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_BLUEVALUE(BBLUE)                  ((BBLUE)  <= LTDC_COLOR)
+#define IS_LTDC_GREENVALUE(BGREEN)                ((BGREEN) <= LTDC_COLOR)
+#define IS_LTDC_REDVALUE(BRED)                    ((BRED)   <= LTDC_COLOR)
+#define IS_LTDC_BLENDING_FACTOR1(BlendingFactor1) (((BlendingFactor1) == LTDC_BLENDING_FACTOR1_CA) || \
+                                                   ((BlendingFactor1) == LTDC_BLENDING_FACTOR1_PAxCA))
+#define IS_LTDC_BLENDING_FACTOR2(BlendingFactor2) (((BlendingFactor2) == LTDC_BLENDING_FACTOR2_CA) || \
+                                                   ((BlendingFactor2) == LTDC_BLENDING_FACTOR2_PAxCA))
+#define IS_LTDC_PIXEL_FORMAT(Pixelformat)         (((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB8888) || ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB888)   || \
+                                                   ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB565)   || ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB1555) || \
+                                                   ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB4444) || ((Pixelformat) == LTDC_PIXEL_FORMAT_L8)       || \
+                                                   ((Pixelformat) == LTDC_PIXEL_FORMAT_AL44)     || ((Pixelformat) == LTDC_PIXEL_FORMAT_AL88))
+#define IS_LTDC_ALPHA(ALPHA)                      ((ALPHA) <= LTDC_ALPHA)
+#define IS_LTDC_HCONFIGST(HCONFIGST)              ((HCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_HCONFIGSP(HCONFIGSP)              ((HCONFIGSP) <= LTDC_STOPPOSITION)
+#define IS_LTDC_VCONFIGST(VCONFIGST)              ((VCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_VCONFIGSP(VCONFIGSP)              ((VCONFIGSP) <= LTDC_STOPPOSITION)
+#define IS_LTDC_CFBP(CFBP)                        ((CFBP) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLL(CFBLL)                      ((CFBLL) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLNBR(CFBLNBR)                  ((CFBLNBR) <= LTDC_LINE_NUMBER)
+#define IS_LTDC_LIPOS(LIPOS)                      ((LIPOS) <= 0x7FF)
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Functions LTDC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F429xx || STM32F439xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_LTDC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h
new file mode 100644
index 0000000..7e11d7c
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h
@@ -0,0 +1,316 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_nand.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of NAND HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_NAND_H
+#define __STM32F4xx_HAL_NAND_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+  #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+  #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup NAND
+  * @{
+  */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Types NAND Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL NAND State structures definition
+  */
+typedef enum
+{
+  HAL_NAND_STATE_RESET     = 0x00,  /*!< NAND not yet initialized or disabled */
+  HAL_NAND_STATE_READY     = 0x01,  /*!< NAND initialized and ready for use   */
+  HAL_NAND_STATE_BUSY      = 0x02,  /*!< NAND internal process is ongoing     */
+  HAL_NAND_STATE_ERROR     = 0x03   /*!< NAND error state                     */
+}HAL_NAND_StateTypeDef;
+
+/**
+  * @brief  NAND Memory electronic signature Structure definition
+  */
+typedef struct
+{
+  /*<! NAND memory electronic signature maker and device IDs */
+
+  uint8_t Maker_Id;
+
+  uint8_t Device_Id;
+
+  uint8_t Third_Id;
+
+  uint8_t Fourth_Id;
+}NAND_IDTypeDef;
+
+/**
+  * @brief  NAND Memory address Structure definition
+  */
+typedef struct
+{
+  uint16_t Page;   /*!< NAND memory Page address  */
+
+  uint16_t Zone;   /*!< NAND memory Zone address  */
+
+  uint16_t Block;  /*!< NAND memory Block address */
+
+}NAND_AddressTypeDef;
+
+/**
+  * @brief  NAND Memory info Structure definition
+  */
+typedef struct
+{
+  uint32_t PageSize;       /*!< NAND memory page (without spare area) size measured in K. bytes */
+
+  uint32_t SpareAreaSize;  /*!< NAND memory spare area size measured in K. bytes                */
+
+  uint32_t BlockSize;      /*!< NAND memory block size number of pages                          */
+
+  uint32_t BlockNbr;       /*!< NAND memory number of blocks                                    */
+
+  uint32_t ZoneSize;       /*!< NAND memory zone size measured in number of blocks              */
+}NAND_InfoTypeDef;
+
+/**
+  * @brief  NAND handle Structure definition
+  */
+typedef struct
+{
+  FMC_NAND_TypeDef             *Instance;  /*!< Register base address                        */
+
+  FMC_NAND_InitTypeDef         Init;       /*!< NAND device control configuration parameters */
+
+  HAL_LockTypeDef              Lock;       /*!< NAND locking object                          */
+
+  __IO HAL_NAND_StateTypeDef   State;      /*!< NAND device access state                     */
+
+  NAND_InfoTypeDef             Info;       /*!< NAND characteristic information structure    */
+}NAND_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Macros NAND Exported Macros
+ * @{
+ */
+
+/** @brief Reset NAND handle state
+  * @param  __HANDLE__: specifies the NAND handle.
+  * @retval None
+  */
+#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NAND_Exported_Functions NAND Exported Functions
+  * @{
+  */
+
+/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef  HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
+HAL_StatusTypeDef  HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
+void        HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
+void        HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
+void               HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
+void        HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
+
+/**
+  * @}
+  */
+
+/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions
+  * @{
+  */
+
+/* IO operation functions  ****************************************************/
+HAL_StatusTypeDef  HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);
+HAL_StatusTypeDef  HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef  HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead);
+HAL_StatusTypeDef  HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite);
+HAL_StatusTypeDef  HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
+HAL_StatusTypeDef  HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
+HAL_StatusTypeDef  HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+uint32_t           HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+uint32_t           HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+
+/**
+  * @}
+  */
+
+/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+
+/* NAND Control functions  ****************************************************/
+HAL_StatusTypeDef  HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef  HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef  HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout);
+
+/**
+  * @}
+  */
+
+/** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+/* NAND State functions *******************************************************/
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
+uint32_t              HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup NAND_Private_Constants NAND Private Constants
+  * @{
+  */
+#define NAND_DEVICE1               ((uint32_t)0x70000000)
+#define NAND_DEVICE2               ((uint32_t)0x80000000)
+#define NAND_WRITE_TIMEOUT         ((uint32_t)0x01000000)
+
+#define CMD_AREA                   ((uint32_t)(1<<16))  /* A16 = CLE high */
+#define ADDR_AREA                  ((uint32_t)(1<<17))  /* A17 = ALE high */
+
+#define NAND_CMD_AREA_A            ((uint8_t)0x00)
+#define NAND_CMD_AREA_B            ((uint8_t)0x01)
+#define NAND_CMD_AREA_C            ((uint8_t)0x50)
+#define NAND_CMD_AREA_TRUE1        ((uint8_t)0x30)
+
+#define NAND_CMD_WRITE0            ((uint8_t)0x80)
+#define NAND_CMD_WRITE_TRUE1       ((uint8_t)0x10)
+#define NAND_CMD_ERASE0            ((uint8_t)0x60)
+#define NAND_CMD_ERASE1            ((uint8_t)0xD0)
+#define NAND_CMD_READID            ((uint8_t)0x90)
+#define NAND_CMD_STATUS            ((uint8_t)0x70)
+#define NAND_CMD_LOCK_STATUS       ((uint8_t)0x7A)
+#define NAND_CMD_RESET             ((uint8_t)0xFF)
+
+/* NAND memory status */
+#define NAND_VALID_ADDRESS         ((uint32_t)0x00000100)
+#define NAND_INVALID_ADDRESS       ((uint32_t)0x00000200)
+#define NAND_TIMEOUT_ERROR         ((uint32_t)0x00000400)
+#define NAND_BUSY                  ((uint32_t)0x00000000)
+#define NAND_ERROR                 ((uint32_t)0x00000001)
+#define NAND_READY                 ((uint32_t)0x00000040)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup NAND_Private_Macros NAND Private Macros
+  * @{
+  */
+
+/**
+  * @brief  NAND memory address computation.
+  * @param  __ADDRESS__: NAND memory address.
+  * @param  __HANDLE__ : NAND handle.
+  * @retval NAND Raw address value
+  */
+#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
+                         (((__ADDRESS__)->Block + (((__ADDRESS__)->Zone) * ((__HANDLE__)->Info.ZoneSize)))* ((__HANDLE__)->Info.BlockSize)))
+
+/**
+  * @brief  NAND memory address cycling.
+  * @param  __ADDRESS__: NAND memory address.
+  * @retval NAND address cycling value.
+  */
+#define ADDR_1ST_CYCLE(__ADDRESS__)       (uint8_t)(__ADDRESS__)              /* 1st addressing cycle */
+#define ADDR_2ND_CYCLE(__ADDRESS__)       (uint8_t)((__ADDRESS__) >> 8)       /* 2nd addressing cycle */
+#define ADDR_3RD_CYCLE(__ADDRESS__)       (uint8_t)((__ADDRESS__) >> 16)      /* 3rd addressing cycle */
+#define ADDR_4TH_CYCLE(__ADDRESS__)       (uint8_t)((__ADDRESS__) >> 24)      /* 4th addressing cycle */
+/**
+  * @}
+  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+          STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+          STM32F446xx */
+
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_NAND_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h
new file mode 100644
index 0000000..b104eed
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h
@@ -0,0 +1,301 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_nor.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of NOR HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_NOR_H
+#define __STM32F4xx_HAL_NOR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+  #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+  #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup NOR
+  * @{
+  */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup NOR_Exported_Types NOR Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL SRAM State structures definition
+  */
+typedef enum
+{
+  HAL_NOR_STATE_RESET             = 0x00,  /*!< NOR not yet initialized or disabled  */
+  HAL_NOR_STATE_READY             = 0x01,  /*!< NOR initialized and ready for use    */
+  HAL_NOR_STATE_BUSY              = 0x02,  /*!< NOR internal processing is ongoing   */
+  HAL_NOR_STATE_ERROR             = 0x03,  /*!< NOR error state                      */
+  HAL_NOR_STATE_PROTECTED         = 0x04   /*!< NOR NORSRAM device write protected   */
+}HAL_NOR_StateTypeDef;
+
+/**
+  * @brief  FMC NOR Status typedef
+  */
+typedef enum
+{
+  HAL_NOR_STATUS_SUCCESS  = 0,
+  HAL_NOR_STATUS_ONGOING,
+  HAL_NOR_STATUS_ERROR,
+  HAL_NOR_STATUS_TIMEOUT
+}HAL_NOR_StatusTypeDef;
+
+/**
+  * @brief  FMC NOR ID typedef
+  */
+typedef struct
+{
+  uint16_t Manufacturer_Code;  /*!< Defines the device's manufacturer code used to identify the memory       */
+
+  uint16_t Device_Code1;
+
+  uint16_t Device_Code2;
+
+  uint16_t Device_Code3;       /*!< Defines the device's codes used to identify the memory.
+                                    These codes can be accessed by performing read operations with specific
+                                    control signals and addresses set.They can also be accessed by issuing
+                                    an Auto Select command                                                   */
+}NOR_IDTypeDef;
+
+/**
+  * @brief  FMC NOR CFI typedef
+  */
+typedef struct
+{
+  /*!< Defines the information stored in the memory's Common flash interface
+       which contains a description of various electrical and timing parameters,
+       density information and functions supported by the memory                   */
+
+  uint16_t CFI_1;
+
+  uint16_t CFI_2;
+
+  uint16_t CFI_3;
+
+  uint16_t CFI_4;
+}NOR_CFITypeDef;
+
+/**
+  * @brief  NOR handle Structure definition
+  */
+typedef struct
+{
+  FMC_NORSRAM_TypeDef           *Instance;    /*!< Register base address                        */
+
+  FMC_NORSRAM_EXTENDED_TypeDef  *Extended;    /*!< Extended mode register base address          */
+
+  FMC_NORSRAM_InitTypeDef       Init;         /*!< NOR device control configuration parameters  */
+
+  HAL_LockTypeDef               Lock;         /*!< NOR locking object                           */
+
+  __IO HAL_NOR_StateTypeDef     State;        /*!< NOR device access state                      */
+
+}NOR_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup NOR_Exported_Macros NOR Exported Macros
+  * @{
+  */
+/** @brief Reset NOR handle state
+  * @param  __HANDLE__: specifies the NOR handle.
+  * @retval None
+  */
+#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NOR_Exported_Functions
+ *  @{
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group1
+ *  @{
+ */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @addtogroup NOR_Exported_Functions_Group2
+ *  @{
+ */
+/* I/O operation functions  ***************************************************/
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID);
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI);
+/**
+  * @}
+  */
+
+/** @addtogroup NOR_Exported_Functions_Group3
+ *  @{
+ */
+/* NOR Control functions  *****************************************************/
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor);
+/**
+  * @}
+  */
+
+/** @addtogroup NOR_Exported_Functions_Group4
+ *  @{
+ */
+/* NOR State functions ********************************************************/
+HAL_NOR_StateTypeDef  HAL_NOR_GetState(NOR_HandleTypeDef *hnor);
+HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup NOR_Private_Constants NOR Private Constants
+  * @{
+  */
+/* NOR device IDs addresses */
+#define MC_ADDRESS               ((uint16_t)0x0000)
+#define DEVICE_CODE1_ADDR        ((uint16_t)0x0001)
+#define DEVICE_CODE2_ADDR        ((uint16_t)0x000E)
+#define DEVICE_CODE3_ADDR        ((uint16_t)0x000F)
+
+/* NOR CFI IDs addresses */
+#define CFI1_ADDRESS             ((uint16_t)0x61)
+#define CFI2_ADDRESS             ((uint16_t)0x62)
+#define CFI3_ADDRESS             ((uint16_t)0x63)
+#define CFI4_ADDRESS             ((uint16_t)0x64)
+
+/* NOR operation wait timeout */
+#define NOR_TMEOUT               ((uint16_t)0xFFFF)
+
+/* NOR memory data width */
+#define NOR_MEMORY_8B            ((uint8_t)0x0)
+#define NOR_MEMORY_16B           ((uint8_t)0x1)
+
+/* NOR memory device read/write start address */
+#define NOR_MEMORY_ADRESS1       ((uint32_t)0x60000000)
+#define NOR_MEMORY_ADRESS2       ((uint32_t)0x64000000)
+#define NOR_MEMORY_ADRESS3       ((uint32_t)0x68000000)
+#define NOR_MEMORY_ADRESS4       ((uint32_t)0x6C000000)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup NOR_Private_Macros NOR Private Macros
+  * @{
+  */
+/**
+  * @brief  NOR memory address shifting.
+  * @param  __NOR_ADDRESS__: NOR base address
+  * @param  NOR_MEMORY_WIDTH: NOR memory width
+  * @param  ADDRESS: NOR memory address
+  * @retval NOR shifted address value
+  */
+#define NOR_ADDR_SHIFT(__NOR_ADDRESS__, NOR_MEMORY_WIDTH, ADDRESS)    (uint32_t)(((NOR_MEMORY_WIDTH) == NOR_MEMORY_8B)? ((uint32_t)((__NOR_ADDRESS__) + (2 * (ADDRESS)))):\
+                                                                                 ((uint32_t)((__NOR_ADDRESS__) + (ADDRESS))))
+
+/**
+  * @brief  NOR memory write data to specified address.
+  * @param  ADDRESS: NOR memory address
+  * @param  DATA: Data to write
+  * @retval None
+  */
+#define NOR_WRITE(ADDRESS, DATA)  (*(__IO uint16_t *)((uint32_t)(ADDRESS)) = (DATA))
+
+/**
+  * @}
+  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+          STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+          STM32F446xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_NOR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h
new file mode 100644
index 0000000..931d0c0
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h
@@ -0,0 +1,267 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pccard.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of PCCARD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCCARD_H
+#define __STM32F4xx_HAL_PCCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+  #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/** @addtogroup PCCARD
+  * @{
+  */
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Types PCCARD Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL PCCARD State structures definition
+  */
+typedef enum
+{
+  HAL_PCCARD_STATE_RESET     = 0x00,    /*!< PCCARD peripheral not yet initialized or disabled */
+  HAL_PCCARD_STATE_READY     = 0x01,    /*!< PCCARD peripheral ready                           */
+  HAL_PCCARD_STATE_BUSY      = 0x02,    /*!< PCCARD peripheral busy                            */
+  HAL_PCCARD_STATE_ERROR     = 0x04     /*!< PCCARD peripheral error                           */
+}HAL_PCCARD_StateTypeDef;
+
+typedef enum
+{
+  HAL_PCCARD_STATUS_SUCCESS = 0,
+  HAL_PCCARD_STATUS_ONGOING,
+  HAL_PCCARD_STATUS_ERROR,
+  HAL_PCCARD_STATUS_TIMEOUT
+}HAL_PCCARD_StatusTypeDef;
+
+/**
+  * @brief  FMC_PCCARD handle Structure definition
+  */
+typedef struct
+{
+  FMC_PCCARD_TypeDef           *Instance;              /*!< Register base address for PCCARD device          */
+
+  FMC_PCCARD_InitTypeDef       Init;                   /*!< PCCARD device control configuration parameters   */
+
+  __IO HAL_PCCARD_StateTypeDef State;                  /*!< PCCARD device access state                       */
+
+  HAL_LockTypeDef              Lock;                   /*!< PCCARD Lock                                      */
+
+}PCCARD_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Macros PCCARD Exported Macros
+  * @{
+  */
+/** @brief Reset PCCARD handle state
+  * @param  __HANDLE__: specifies the PCCARD handle.
+  * @retval None
+  */
+#define __HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_PCCARD_STATE_RESET)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCCARD_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup PCCARD_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef  HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming);
+HAL_StatusTypeDef  HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard);
+/**
+  * @}
+  */
+
+/** @addtogroup PCCARD_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions  *****************************************************/
+HAL_StatusTypeDef  HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus);
+HAL_StatusTypeDef  HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress,  uint8_t *pStatus);
+HAL_StatusTypeDef  HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef  HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef  HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard);
+void               HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard);
+void               HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard);
+
+/**
+  * @}
+  */
+
+/** @addtogroup PCCARD_Exported_Functions_Group3
+  * @{
+  */
+/* PCCARD State functions *******************************************************/
+HAL_PCCARD_StateTypeDef  HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard);
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard);
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PCCARD_Private_Constants PCCARD Private Constants
+  * @{
+  */
+#define PCCARD_DEVICE_ADDRESS             ((uint32_t)0x90000000)
+#define PCCARD_ATTRIBUTE_SPACE_ADDRESS    ((uint32_t)0x98000000)   /* Attribute space size to @0x9BFF FFFF */
+#define PCCARD_COMMON_SPACE_ADDRESS       PCCARD_DEVICE_ADDRESS    /* Common space size to @0x93FF FFFF    */
+#define PCCARD_IO_SPACE_ADDRESS           ((uint32_t)0x9C000000)   /* IO space size to @0x9FFF FFFF        */
+#define PCCARD_IO_SPACE_PRIMARY_ADDR      ((uint32_t)0x9C0001F0)   /* IO space size to @0x9FFF FFFF        */
+
+/* Flash-ATA registers description */
+#define ATA_DATA                       ((uint8_t)0x00)    /* Data register */
+#define ATA_SECTOR_COUNT               ((uint8_t)0x02)    /* Sector Count register */
+#define ATA_SECTOR_NUMBER              ((uint8_t)0x03)    /* Sector Number register */
+#define ATA_CYLINDER_LOW               ((uint8_t)0x04)    /* Cylinder low register */
+#define ATA_CYLINDER_HIGH              ((uint8_t)0x05)    /* Cylinder high register */
+#define ATA_CARD_HEAD                  ((uint8_t)0x06)    /* Card/Head register */
+#define ATA_STATUS_CMD                 ((uint8_t)0x07)    /* Status(read)/Command(write) register */
+#define ATA_STATUS_CMD_ALTERNATE       ((uint8_t)0x0E)    /* Alternate Status(read)/Command(write) register */
+#define ATA_COMMON_DATA_AREA           ((uint16_t)0x0400) /* Start of data area (for Common access only!) */
+#define ATA_CARD_CONFIGURATION         ((uint16_t)0x0202) /* Card Configuration and Status Register */
+
+/* Flash-ATA commands */
+#define ATA_READ_SECTOR_CMD            ((uint8_t)0x20)
+#define ATA_WRITE_SECTOR_CMD           ((uint8_t)0x30)
+#define ATA_ERASE_SECTOR_CMD           ((uint8_t)0xC0)
+#define ATA_IDENTIFY_CMD               ((uint8_t)0xEC)
+
+/* PC Card/Compact Flash status */
+#define PCCARD_TIMEOUT_ERROR           ((uint8_t)0x60)
+#define PCCARD_BUSY                    ((uint8_t)0x80)
+#define PCCARD_PROGR                   ((uint8_t)0x01)
+#define PCCARD_READY                   ((uint8_t)0x40)
+
+#define PCCARD_SECTOR_SIZE             ((uint32_t)255)    /* In half words */
+
+/**
+  * @}
+  */
+/* Compact Flash redefinition */
+#define HAL_CF_Init                 HAL_PCCARD_Init
+#define HAL_CF_DeInit               HAL_PCCARD_DeInit
+#define HAL_CF_MspInit              HAL_PCCARD_MspInit
+#define HAL_CF_MspDeInit            HAL_PCCARD_MspDeInit
+
+#define HAL_CF_Read_ID              HAL_PCCARD_Read_ID
+#define HAL_CF_Write_Sector         HAL_PCCARD_Write_Sector
+#define HAL_CF_Read_Sector          HAL_PCCARD_Read_Sector
+#define HAL_CF_Erase_Sector         HAL_PCCARD_Erase_Sector
+#define HAL_CF_Reset                HAL_PCCARD_Reset
+#define HAL_CF_IRQHandler           HAL_PCCARD_IRQHandler
+#define HAL_CF_ITCallback           HAL_PCCARD_ITCallback
+
+#define HAL_CF_GetState             HAL_PCCARD_GetState
+#define HAL_CF_GetStatus            HAL_PCCARD_GetStatus
+#define HAL_CF_ReadStatus           HAL_PCCARD_ReadStatus
+
+#define HAL_CF_STATUS_SUCCESS       HAL_PCCARD_STATUS_SUCCESS
+#define HAL_CF_STATUS_ONGOING       HAL_PCCARD_STATUS_ONGOING
+#define HAL_CF_STATUS_ERROR         HAL_PCCARD_STATUS_ERROR
+#define HAL_CF_STATUS_TIMEOUT       HAL_PCCARD_STATUS_TIMEOUT
+#define HAL_CF_StatusTypeDef        HAL_PCCARD_StatusTypeDef
+
+
+#define CF_DEVICE_ADDRESS           PCCARD_DEVICE_ADDRESS
+#define CF_ATTRIBUTE_SPACE_ADDRESS  PCCARD_ATTRIBUTE_SPACE_ADDRESS
+#define CF_COMMON_SPACE_ADDRESS     PCCARD_COMMON_SPACE_ADDRESS
+#define CF_IO_SPACE_ADDRESS         PCCARD_IO_SPACE_ADDRESS
+#define CF_IO_SPACE_PRIMARY_ADDR    PCCARD_IO_SPACE_PRIMARY_ADDR
+
+#define CF_TIMEOUT_ERROR            PCCARD_TIMEOUT_ERROR
+#define CF_BUSY                     PCCARD_BUSY
+#define CF_PROGR                    PCCARD_PROGR
+#define CF_READY                    PCCARD_READY
+
+#define CF_SECTOR_SIZE              PCCARD_SECTOR_SIZE
+
+/* Private macros ------------------------------------------------------------*/
+/**
+  * @}
+  */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+          STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_PCCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h
new file mode 100644
index 0000000..e6b9e57
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h
@@ -0,0 +1,341 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pcd.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of PCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_H
+#define __STM32F4xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PCD
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+  * @{
+  */
+
+/**
+  * @brief  PCD State structure definition
+  */
+typedef enum
+{
+  HAL_PCD_STATE_RESET   = 0x00,
+  HAL_PCD_STATE_READY   = 0x01,
+  HAL_PCD_STATE_ERROR   = 0x02,
+  HAL_PCD_STATE_BUSY    = 0x03,
+  HAL_PCD_STATE_TIMEOUT = 0x04
+} PCD_StateTypeDef;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+/* Device LPM suspend state */
+typedef enum
+{
+  LPM_L0 = 0x00, /* on */
+  LPM_L1 = 0x01, /* LPM L1 sleep */
+  LPM_L2 = 0x02, /* suspend */
+  LPM_L3 = 0x03, /* off */
+}PCD_LPM_StateTypeDef;
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+typedef USB_OTG_GlobalTypeDef  PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef     PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef      PCD_EPTypeDef ;
+
+/**
+  * @brief  PCD Handle Structure definition
+  */
+typedef struct
+{
+  PCD_TypeDef             *Instance;    /*!< Register base address              */
+  PCD_InitTypeDef         Init;         /*!< PCD required parameters            */
+  PCD_EPTypeDef           IN_ep[15];    /*!< IN endpoint parameters             */
+  PCD_EPTypeDef           OUT_ep[15];   /*!< OUT endpoint parameters            */
+  HAL_LockTypeDef         Lock;         /*!< PCD peripheral status              */
+  __IO PCD_StateTypeDef   State;        /*!< PCD communication state            */
+  uint32_t                Setup[12];    /*!< Setup packet buffer                */
+#ifdef USB_OTG_GLPMCFG_LPMEN
+  PCD_LPM_StateTypeDef    LPM_State;    /*!< LPM State                          */
+  uint32_t                BESL;
+  uint32_t                lpm_active;   /*!< Enable or disable the Link Power Management .
+                                        This parameter can be set to ENABLE or DISABLE */
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+  void                    *pData;       /*!< Pointer to upper stack Handler */
+} PCD_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Include PCD HAL Extension module */
+#include "stm32f4xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+  * @{
+  */
+
+/** @defgroup PCD_Speed PCD Speed
+  * @{
+  */
+#define PCD_SPEED_HIGH               0
+#define PCD_SPEED_HIGH_IN_FULL       1
+#define PCD_SPEED_FULL               2
+/**
+  * @}
+  */
+
+/** @defgroup PCD_PHY_Module PCD PHY Module
+  * @{
+  */
+#define PCD_PHY_ULPI                 1
+#define PCD_PHY_EMBEDDED             2
+/**
+  * @}
+  */
+
+/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value
+  * @{
+  */
+#ifndef USBD_HS_TRDT_VALUE
+ #define USBD_HS_TRDT_VALUE           9
+#endif /* USBD_HS_TRDT_VALUE */
+#ifndef USBD_FS_TRDT_VALUE
+ #define USBD_FS_TRDT_VALUE           5
+#endif /* USBD_FS_TRDT_VALUE */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_ENABLE(__HANDLE__)                   USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__)                  USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__)             *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+                                                           ~(USB_OTG_PCGCCTL_STOPCLK)
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__)               *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__)            ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10)
+
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE                ((uint32_t)0x08)
+#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE               ((uint32_t)0x0C)
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE        ((uint32_t)0x10)
+
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE                ((uint32_t)0x08)
+#define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE               ((uint32_t)0x0C)
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE        ((uint32_t)0x10)
+
+#define USB_OTG_HS_WAKEUP_EXTI_LINE              ((uint32_t)0x00100000)  /*!< External interrupt line 20 Connected to the USB HS EXTI Line */
+#define USB_OTG_FS_WAKEUP_EXTI_LINE              ((uint32_t)0x00040000)  /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                          EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE()  EXTI->FTSR |= (USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                            EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE()   EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                                    EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE;)\
+                                                                    EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+                                                                    EXTI->FTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT()   (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                          EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE()  EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                            EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE()  EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                                   EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                                   EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+                                                                   EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT()  (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* I/O operation functions  ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 IO operation functions
+  * @{
+  */
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t          HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+/** @defgroup PCD_Instance_definition PCD Instance definition
+  * @{
+  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+    defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+ #define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
+                                        ((INSTANCE) == USB_OTG_HS))
+#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ #define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+#endif
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h
new file mode 100644
index 0000000..ce67f24
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h
@@ -0,0 +1,105 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pcd_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of PCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_EX_H
+#define __STM32F4xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PCDEx
+  * @{
+  */
+/* Exported types ------------------------------------------------------------*/
+#if defined(STM32F446xx)
+typedef enum
+{
+  PCD_LPM_L0_ACTIVE = 0x00, /* on */
+  PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */
+}PCD_LPM_MsgTypeDef;
+#endif /* STM32F446xx */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
+  * @{
+  */
+/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
+#if defined(STM32F446xx)
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
+#endif /* STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h
new file mode 100644
index 0000000..e55a384
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h
@@ -0,0 +1,484 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pwr.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of PWR HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_H
+#define __STM32F4xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWR
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+  * @{
+  */
+
+/**
+  * @brief  PWR PVD configuration structure definition
+  */
+typedef struct
+{
+  uint32_t PVDLevel;   /*!< PVDLevel: Specifies the PVD detection level.
+                            This parameter can be a value of @ref PWR_PVD_detection_level */
+
+  uint32_t Mode;      /*!< Mode: Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+  * @{
+  */
+
+/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
+  * @{
+  */
+#define PWR_WAKEUP_PIN1                 ((uint32_t)0x00000100)
+#define PWR_WAKEUP_PIN2                 ((uint32_t)0x00000080)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
+  * @{
+  */
+#define PWR_PVDLEVEL_0                  PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1                  PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2                  PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3                  PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4                  PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5                  PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6                  PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7                  PWR_CR_PLS_LEV7/* External input analog voltage
+                                                          (Compare internally to VREFINT) */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
+  * @{
+  */
+#define PWR_PVD_MODE_NORMAL                 ((uint32_t)0x00000000)   /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING              ((uint32_t)0x00010001)   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING             ((uint32_t)0x00010002)   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING      ((uint32_t)0x00010003)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING           ((uint32_t)0x00020001)   /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING          ((uint32_t)0x00020002)   /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING   ((uint32_t)0x00020003)   /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+  * @}
+  */
+
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_ON                        ((uint32_t)0x00000000)
+#define PWR_LOWPOWERREGULATOR_ON                    PWR_CR_LPDS
+/**
+  * @}
+  */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+  * @{
+  */
+#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+  * @{
+  */
+#define PWR_STOPENTRY_WFI               ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE               ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Flag PWR Flag
+  * @{
+  */
+#define PWR_FLAG_WU                     PWR_CSR_WUF
+#define PWR_FLAG_SB                     PWR_CSR_SBF
+#define PWR_FLAG_PVDO                   PWR_CSR_PVDO
+#define PWR_FLAG_BRR                    PWR_CSR_BRR
+#define PWR_FLAG_VOSRDY                 PWR_CSR_VOSRDY
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+  * @{
+  */
+
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+/** @brief  macros configure the main internal regulator output voltage.
+  * @param  __REGULATOR__: specifies the regulator output voltage to achieve
+  *         a tradeoff between performance and power consumption when the device does
+  *         not operate at the maximum frequency (refer to the datasheets for more details).
+  *          This parameter can be one of the following values:
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+  * @retval None
+  */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do {                                                     \
+                                                            __IO uint32_t tmpreg;                               \
+                                                            MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__));   \
+                                                            /* Delay after an RCC peripheral clock enabling */  \
+                                                            tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS);             \
+                                                            UNUSED(tmpreg);                                     \
+				                                                	} while(0)
+#else
+/** @brief  macros configure the main internal regulator output voltage.
+  * @param  __REGULATOR__: specifies the regulator output voltage to achieve
+  *         a tradeoff between performance and power consumption when the device does
+  *         not operate at the maximum frequency (refer to the datasheets for more details).
+  *          This parameter can be one of the following values:
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+  * @retval None
+  */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do {                                                     \
+                                                            __IO uint32_t tmpreg;                               \
+                                                            MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__));   \
+                                                            /* Delay after an RCC peripheral clock enabling */  \
+                                                            tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS);             \
+                                                            UNUSED(tmpreg);                                     \
+				                                                	} while(0)
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+
+/** @brief  Check PWR flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *           This parameter can be one of the following values:
+  *            @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+  *                  was received from the WKUP pin or from the RTC alarm (Alarm A
+  *                  or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+  *                  An additional wakeup event is detected if the WKUP pin is enabled
+  *                  (by setting the EWUP bit) when the WKUP pin level is already high.
+  *            @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+  *                  resumed from StandBy mode.
+  *            @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+  *                  For this reason, this bit is equal to 0 after Standby or reset
+  *                  until the PVDE bit is set.
+  *            @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
+  *                  when the device wakes up from Standby mode or by a system reset
+  *                  or power reset.
+  *            @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
+  *                 scaling output selection is ready.
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the PWR's pending flags.
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_FLAG_WU: Wake Up flag
+  *            @arg PWR_FLAG_SB: StandBy flag
+  */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |=  (__FLAG__) << 2)
+
+/**
+  * @brief Enable the PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT()   (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable the PVD EXTI Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT()  (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Enable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT()   (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT()  (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Enable the PVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE()   SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE()  CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Enable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE()   SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief Disable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()  CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief  PVD EXTI line configuration: set rising & falling edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE()   __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE()  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+  * @brief checks whether the specified PVD Exti interrupt flag is set or not.
+  * @retval EXTI PVD Line Status.
+  */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG()  (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Clear the PVD Exti flag.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG()  (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief  Generates a Software interrupt on PVD EXTI line.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @}
+  */
+
+/* Include PWR HAL Extension module */
+#include "stm32f4xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+/**
+  * @}
+  */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+  * @{
+  */
+/* Peripheral Control functions  **********************************************/
+/* PVD configuration */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+/* Power PVD IRQ Handler */
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+
+/* Cortex System Control functions  *******************************************/
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWR_Private_Constants PWR Private Constants
+  * @{
+  */
+
+/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
+  * @{
+  */
+#define PWR_EXTI_LINE_PVD  ((uint32_t)EXTI_IMR_MR16)  /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_register_alias_address PWR Register alias address
+  * @{
+  */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+#define PWR_OFFSET               (PWR_BASE - PERIPH_BASE)
+#define PWR_CR_OFFSET            0x00
+#define PWR_CSR_OFFSET           0x04
+#define PWR_CR_OFFSET_BB         (PWR_OFFSET + PWR_CR_OFFSET)
+#define PWR_CSR_OFFSET_BB        (PWR_OFFSET + PWR_CSR_OFFSET)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_CR_register_alias PWR CR Register alias address
+  * @{
+  */
+/* --- CR Register ---*/
+/* Alias word address of DBP bit */
+#define DBP_BIT_NUMBER   POSITION_VAL(PWR_CR_DBP)
+#define CR_DBP_BB        (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (DBP_BIT_NUMBER * 4))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BIT_NUMBER  POSITION_VAL(PWR_CR_PVDE)
+#define CR_PVDE_BB       (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (PVDE_BIT_NUMBER * 4))
+
+/* Alias word address of PMODE bit */
+#define PMODE_BIT_NUMBER  POSITION_VAL(PWR_CR_PMODE)
+#define CR_PMODE_BB      (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (PMODE_BIT_NUMBER * 4))
+/**
+  * @}
+  */
+
+/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
+  * @{
+  */
+/* --- CSR Register ---*/
+/* Alias word address of EWUP bit */
+#define EWUP_BIT_NUMBER  POSITION_VAL(PWR_CSR_EWUP)
+#define CSR_EWUP_BB      (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32) + (EWUP_BIT_NUMBER * 4))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWR_Private_Macros PWR Private Macros
+  * @{
+  */
+
+/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
+  * @{
+  */
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2))
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+                              ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_NORMAL))
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+                                     ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h
new file mode 100644
index 0000000..73d9d88
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h
@@ -0,0 +1,291 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pwr_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of PWR HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_EX_H
+#define __STM32F4xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWREx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+  * @{
+  */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_UNDERDRIVE_ON                       PWR_CR_MRUDS
+#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON                   ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
+/**
+  * @}
+  */
+
+/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
+  * @{
+  */
+#define PWR_FLAG_ODRDY                  PWR_CSR_ODRDY
+#define PWR_FLAG_ODSWRDY                PWR_CSR_ODSWRDY
+#define PWR_FLAG_UDRDY                  PWR_CSR_UDSWRDY
+/**
+  * @}
+  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
+  * @{
+  */
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+#define PWR_REGULATOR_VOLTAGE_SCALE1         PWR_CR_VOS             /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */
+#define PWR_REGULATOR_VOLTAGE_SCALE2         ((uint32_t)0x00000000) /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */
+#else
+#define PWR_REGULATOR_VOLTAGE_SCALE1         PWR_CR_VOS             /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to
+                                                                       180 MHz by activating the over-drive mode. */
+#define PWR_REGULATOR_VOLTAGE_SCALE2         PWR_CR_VOS_1           /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to
+                                                                       168 MHz by activating the over-drive mode. */
+#define PWR_REGULATOR_VOLTAGE_SCALE3         PWR_CR_VOS_0           /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+  *  @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/** @brief Macros to enable or disable the Over drive mode.
+  * @note  These macros can be used only for STM32F42xx/STM3243xx devices.
+  */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Over drive switching.
+  * @note  These macros can be used only for STM32F42xx/STM3243xx devices.
+  */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Under drive mode.
+  * @note  This mode is enabled only with STOP low power mode.
+  *        In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+  *        mode is only available when the main regulator or the low power regulator
+  *        is in low voltage mode.
+  * @note  If the Under-drive mode was enabled, it is automatically disabled after
+  *        exiting Stop mode.
+  *        When the voltage regulator operates in Under-drive mode, an additional
+  *        startup delay is induced when waking up from Stop mode.
+  */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
+
+/** @brief  Check PWR flag is set or not.
+  * @note   These macros can be used only for STM32F42xx/STM3243xx devices.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+  *                                 is ready
+  *            @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+  *                                   switching is ready
+  *            @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+  *                                 is enabled in Stop mode
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+  * @note  These macros can be used only for STM32F42xx/STM3243xx devices.
+  */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+  *  @{
+  */
+
+/** @addtogroup PWREx_Exported_Functions_Group1
+  * @{
+  */
+void HAL_PWREx_EnableFlashPowerDown(void);
+void HAL_PWREx_DisableFlashPowerDown(void);
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
+uint32_t HAL_PWREx_GetVoltageRange(void);
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWREx_Private_Constants PWREx Private Constants
+  * @{
+  */
+
+/** @defgroup PWREx_register_alias_address PWREx Register alias address
+  * @{
+  */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+/* --- CR Register ---*/
+/* Alias word address of FPDS bit */
+#define FPDS_BIT_NUMBER          POSITION_VAL(PWR_CR_FPDS)
+#define CR_FPDS_BB               (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (FPDS_BIT_NUMBER * 4))
+
+/* Alias word address of ODEN bit   */
+#define ODEN_BIT_NUMBER          POSITION_VAL(PWR_CR_ODEN)
+#define CR_ODEN_BB               (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (ODEN_BIT_NUMBER * 4))
+
+/* Alias word address of ODSWEN bit */
+#define ODSWEN_BIT_NUMBER        POSITION_VAL(PWR_CR_ODSWEN)
+#define CR_ODSWEN_BB             (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (ODSWEN_BIT_NUMBER * 4))
+
+/* Alias word address of MRLVDS bit */
+#define MRLVDS_BIT_NUMBER        POSITION_VAL(PWR_CR_MRLVDS)
+#define CR_MRLVDS_BB             (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (MRLVDS_BIT_NUMBER * 4))
+
+/* Alias word address of LPLVDS bit */
+#define LPLVDS_BIT_NUMBER        POSITION_VAL(PWR_CR_LPLVDS)
+#define CR_LPLVDS_BB             (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (LPLVDS_BIT_NUMBER * 4))
+
+ /**
+  * @}
+  */
+
+/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address
+  * @{
+  */
+/* --- CSR Register ---*/
+/* Alias word address of BRE bit */
+#define BRE_BIT_NUMBER   POSITION_VAL(PWR_CSR_BRE)
+#define CSR_BRE_BB      (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32) + (BRE_BIT_NUMBER * 4))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Macros PWREx Private Macros
+  * @{
+  */
+
+/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
+  * @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
+                                                ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+                                               ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
+#else
+#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+                                               ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+                                               ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h
new file mode 100644
index 0000000..b444a46
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h
@@ -0,0 +1,788 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_qspi.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of QSPI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_QSPI_H
+#define __STM32F4xx_HAL_QSPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup QSPI
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Types QSPI Exported Types
+  * @{
+  */
+
+/**
+  * @brief  QSPI Init structure definition
+  */
+
+typedef struct
+{
+  uint32_t ClockPrescaler;     /* Specifies the prescaler factor for generating clock based on the AHB clock.
+                                  This parameter can be a number between 0 and 255 */
+
+  uint32_t FifoThreshold;      /* Specifies the threshold number of bytes in the FIFO (used only in indirect mode)
+                                  This parameter can be a value between 1 and 32 */
+
+  uint32_t SampleShifting;     /* Specifies the Sample Shift. The data is sampled 1/2 clock cycle delay later to
+                                  take in account external signal delays. (It should be QSPI_SAMPLE_SHIFTING_NONE in DDR mode)
+                                  This parameter can be a value of @ref QSPI_SampleShifting */
+
+  uint32_t FlashSize;          /* Specifies the Flash Size. FlashSize+1 is effectively the number of address bits
+                                  required to address the flash memory. The flash capacity can be up to 4GB
+                                  (addressed using 32 bits) in indirect mode, but the addressable space in
+                                  memory-mapped mode is limited to 256MB
+                                  This parameter can be a number between 0 and 31 */
+
+  uint32_t ChipSelectHighTime; /* Specifies the Chip Select High Time. ChipSelectHighTime+1 defines the minimum number
+                                  of clock cycles which the chip select must remain high between commands.
+                                  This parameter can be a value of @ref QSPI_ChipSelectHighTime */
+
+  uint32_t ClockMode;          /* Specifies the Clock Mode. It indicates the level that clock takes between commands.
+                                  This parameter can be a value of @ref QSPI_ClockMode */
+
+  uint32_t FlashID;            /* Specifies the Flash which will be used,
+                                  This parameter can be a value of @ref QSPI_Flash_Select */
+
+  uint32_t DualFlash;          /* Specifies the Dual Flash Mode State
+                                  This parameter can be a value of @ref QSPI_DualFlash_Mode */
+}QSPI_InitTypeDef;
+
+/**
+  * @brief HAL QSPI State structures definition
+  */
+typedef enum
+{
+  HAL_QSPI_STATE_RESET             = 0x00,    /*!< Peripheral not initialized                            */
+  HAL_QSPI_STATE_READY             = 0x01,    /*!< Peripheral initialized and ready for use              */
+  HAL_QSPI_STATE_BUSY              = 0x02,    /*!< Peripheral in indirect mode and busy                  */
+  HAL_QSPI_STATE_BUSY_INDIRECT_TX  = 0x12,    /*!< Peripheral in indirect mode with transmission ongoing */
+  HAL_QSPI_STATE_BUSY_INDIRECT_RX  = 0x22,    /*!< Peripheral in indirect mode with reception ongoing    */
+  HAL_QSPI_STATE_BUSY_AUTO_POLLING = 0x42,    /*!< Peripheral in auto polling mode ongoing               */
+  HAL_QSPI_STATE_BUSY_MEM_MAPPED   = 0x82,    /*!< Peripheral in memory mapped mode ongoing              */
+  HAL_QSPI_STATE_ERROR             = 0x04     /*!< Peripheral in error                                   */
+}HAL_QSPI_StateTypeDef;
+
+/**
+  * @brief  QSPI Handle Structure definition
+  */
+typedef struct
+{
+  QUADSPI_TypeDef            *Instance;        /* QSPI registers base address        */
+  QSPI_InitTypeDef           Init;             /* QSPI communication parameters      */
+  uint8_t                    *pTxBuffPtr;      /* Pointer to QSPI Tx transfer Buffer */
+  __IO uint16_t              TxXferSize;       /* QSPI Tx Transfer size              */
+  __IO uint16_t              TxXferCount;      /* QSPI Tx Transfer Counter           */
+  uint8_t                    *pRxBuffPtr;      /* Pointer to QSPI Rx transfer Buffer */
+  __IO uint16_t              RxXferSize;       /* QSPI Rx Transfer size              */
+  __IO uint16_t              RxXferCount;      /* QSPI Rx Transfer Counter           */
+  DMA_HandleTypeDef          *hdma;            /* QSPI Rx/Tx DMA Handle parameters   */
+  __IO HAL_LockTypeDef       Lock;             /* Locking object                     */
+  __IO HAL_QSPI_StateTypeDef State;            /* QSPI communication state           */
+  __IO uint32_t              ErrorCode;        /* QSPI Error code                    */
+  uint32_t                   Timeout;          /* Timeout for the QSPI memory access */
+}QSPI_HandleTypeDef;
+
+/**
+  * @brief  QSPI Command structure definition
+  */
+typedef struct
+{
+  uint32_t Instruction;        /* Specifies the Instruction to be sent
+                                  This parameter can be a value (8-bit) between 0x00 and 0xFF */
+  uint32_t Address;            /* Specifies the Address to be sent (Size from 1 to 4 bytes according AddressSize)
+                                  This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
+  uint32_t AlternateBytes;     /* Specifies the Alternate Bytes to be sent (Size from 1 to 4 bytes according AlternateBytesSize)
+                                  This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
+  uint32_t AddressSize;        /* Specifies the Address Size
+                                  This parameter can be a value of @ref QSPI_AddressSize */
+  uint32_t AlternateBytesSize; /* Specifies the Alternate Bytes Size
+                                  This parameter can be a value of @ref QSPI_AlternateBytesSize */
+  uint32_t DummyCycles;        /* Specifies the Number of Dummy Cycles.
+                                  This parameter can be a number between 0 and 31 */
+  uint32_t InstructionMode;    /* Specifies the Instruction Mode
+                                  This parameter can be a value of @ref QSPI_InstructionMode */
+  uint32_t AddressMode;        /* Specifies the Address Mode
+                                  This parameter can be a value of @ref QSPI_AddressMode */
+  uint32_t AlternateByteMode;  /* Specifies the Alternate Bytes Mode
+                                  This parameter can be a value of @ref QSPI_AlternateBytesMode */
+  uint32_t DataMode;           /* Specifies the Data Mode (used for dummy cycles and data phases)
+                                  This parameter can be a value of @ref QSPI_DataMode */
+  uint32_t NbData;             /* Specifies the number of data to transfer.
+                                  This parameter can be any value between 0 and 0xFFFFFFFF (0 means undefined length
+                                  until end of memory)*/
+  uint32_t DdrMode;            /* Specifies the double data rate mode for address, alternate byte and data phase
+                                  This parameter can be a value of @ref QSPI_DdrMode */
+  uint32_t DdrHoldHalfCycle;   /* Specifies the DDR hold half cycle. It delays the data output by one half of
+                                  system clock in DDR mode.
+                                  This parameter can be a value of @ref QSPI_DdrHoldHalfCycle */
+  uint32_t SIOOMode;          /* Specifies the send instruction only once mode
+                                  This parameter can be a value of @ref QSPI_SIOOMode */
+}QSPI_CommandTypeDef;
+
+/**
+  * @brief  QSPI Auto Polling mode configuration structure definition
+  */
+typedef struct
+{
+  uint32_t Match;              /* Specifies the value to be compared with the masked status register to get a match.
+                                  This parameter can be any value between 0 and 0xFFFFFFFF */
+  uint32_t Mask;               /* Specifies the mask to be applied to the status bytes received.
+                                  This parameter can be any value between 0 and 0xFFFFFFFF */
+  uint32_t Interval;           /* Specifies the number of clock cycles between two read during automatic polling phases.
+                                  This parameter can be any value between 0 and 0xFFFF */
+  uint32_t StatusBytesSize;    /* Specifies the size of the status bytes received.
+                                  This parameter can be any value between 1 and 4 */
+  uint32_t MatchMode;          /* Specifies the method used for determining a match.
+                                  This parameter can be a value of @ref QSPI_MatchMode */
+  uint32_t AutomaticStop;      /* Specifies if automatic polling is stopped after a match.
+                                  This parameter can be a value of @ref QSPI_AutomaticStop */
+}QSPI_AutoPollingTypeDef;
+
+/**
+  * @brief  QSPI Memory Mapped mode configuration structure definition
+  */
+typedef struct
+{
+  uint32_t TimeOutPeriod;      /* Specifies the number of clock to wait when the FIFO is full before to release the chip select.
+                                  This parameter can be any value between 0 and 0xFFFF */
+  uint32_t TimeOutActivation;  /* Specifies if the time out counter is enabled to release the chip select.
+                                  This parameter can be a value of @ref QSPI_TimeOutActivation */
+}QSPI_MemoryMappedTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Constants QSPI Exported Constants
+  * @{
+  */
+/** @defgroup QSPI_ErrorCode QSPI Error Code
+  * @{
+  */
+#define HAL_QSPI_ERROR_NONE            ((uint32_t)0x00000000) /*!< No error           */
+#define HAL_QSPI_ERROR_TIMEOUT         ((uint32_t)0x00000001) /*!< Timeout error      */
+#define HAL_QSPI_ERROR_TRANSFER        ((uint32_t)0x00000002) /*!< Transfer error     */
+#define HAL_QSPI_ERROR_DMA             ((uint32_t)0x00000004) /*!< DMA transfer error */
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_SampleShifting QSPI Sample Shifting
+  * @{
+  */
+#define QSPI_SAMPLE_SHIFTING_NONE           ((uint32_t)0x00000000)        /*!<No clock cycle shift to sample data*/
+#define QSPI_SAMPLE_SHIFTING_HALFCYCLE      ((uint32_t)QUADSPI_CR_SSHIFT) /*!<1/2 clock cycle shift to sample data*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_ChipSelectHighTime QSPI Chip Select High Time
+  * @{
+  */
+#define QSPI_CS_HIGH_TIME_1_CYCLE           ((uint32_t)0x00000000)                              /*!<nCS stay high for at least 1 clock cycle between commands*/
+#define QSPI_CS_HIGH_TIME_2_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_0)                      /*!<nCS stay high for at least 2 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_3_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_1)                      /*!<nCS stay high for at least 3 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_4_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_0 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 4 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_5_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_2)                      /*!<nCS stay high for at least 5 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_6_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 6 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_7_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 7 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_8_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT)                        /*!<nCS stay high for at least 8 clock cycles between commands*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_ClockMode QSPI Clock Mode
+  * @{
+  */
+#define QSPI_CLOCK_MODE_0                   ((uint32_t)0x00000000)         /*!<Clk stays low while nCS is released*/
+#define QSPI_CLOCK_MODE_3                   ((uint32_t)QUADSPI_DCR_CKMODE) /*!<Clk goes high while nCS is released*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Flash_Select QSPI Flash Select
+  * @{
+  */
+#define QSPI_FLASH_ID_1           ((uint32_t)0x00000000)
+#define QSPI_FLASH_ID_2           ((uint32_t)QUADSPI_CR_FSEL)
+/**
+  * @}
+  */
+
+  /** @defgroup QSPI_DualFlash_Mode  QSPI Dual Flash Mode
+  * @{
+  */
+#define QSPI_DUALFLASH_ENABLE            ((uint32_t)QUADSPI_CR_DFM)
+#define QSPI_DUALFLASH_DISABLE           ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_AddressSize QSPI Address Size
+  * @{
+  */
+#define QSPI_ADDRESS_8_BITS            ((uint32_t)0x00000000)           /*!<8-bit address*/
+#define QSPI_ADDRESS_16_BITS           ((uint32_t)QUADSPI_CCR_ADSIZE_0) /*!<16-bit address*/
+#define QSPI_ADDRESS_24_BITS           ((uint32_t)QUADSPI_CCR_ADSIZE_1) /*!<24-bit address*/
+#define QSPI_ADDRESS_32_BITS           ((uint32_t)QUADSPI_CCR_ADSIZE)   /*!<32-bit address*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_AlternateBytesSize QSPI Alternate Bytes Size
+  * @{
+  */
+#define QSPI_ALTERNATE_BYTES_8_BITS    ((uint32_t)0x00000000)           /*!<8-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_16_BITS   ((uint32_t)QUADSPI_CCR_ABSIZE_0) /*!<16-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_24_BITS   ((uint32_t)QUADSPI_CCR_ABSIZE_1) /*!<24-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_32_BITS   ((uint32_t)QUADSPI_CCR_ABSIZE)   /*!<32-bit alternate bytes*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_InstructionMode QSPI Instruction Mode
+* @{
+*/
+#define QSPI_INSTRUCTION_NONE          ((uint32_t)0x00000000)          /*!<No instruction*/
+#define QSPI_INSTRUCTION_1_LINE        ((uint32_t)QUADSPI_CCR_IMODE_0) /*!<Instruction on a single line*/
+#define QSPI_INSTRUCTION_2_LINES       ((uint32_t)QUADSPI_CCR_IMODE_1) /*!<Instruction on two lines*/
+#define QSPI_INSTRUCTION_4_LINES       ((uint32_t)QUADSPI_CCR_IMODE)   /*!<Instruction on four lines*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_AddressMode QSPI Address Mode
+* @{
+*/
+#define QSPI_ADDRESS_NONE              ((uint32_t)0x00000000)           /*!<No address*/
+#define QSPI_ADDRESS_1_LINE            ((uint32_t)QUADSPI_CCR_ADMODE_0) /*!<Address on a single line*/
+#define QSPI_ADDRESS_2_LINES           ((uint32_t)QUADSPI_CCR_ADMODE_1) /*!<Address on two lines*/
+#define QSPI_ADDRESS_4_LINES           ((uint32_t)QUADSPI_CCR_ADMODE)   /*!<Address on four lines*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_AlternateBytesMode  QSPI Alternate Bytes Mode
+* @{
+*/
+#define QSPI_ALTERNATE_BYTES_NONE      ((uint32_t)0x00000000)           /*!<No alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_1_LINE    ((uint32_t)QUADSPI_CCR_ABMODE_0) /*!<Alternate bytes on a single line*/
+#define QSPI_ALTERNATE_BYTES_2_LINES   ((uint32_t)QUADSPI_CCR_ABMODE_1) /*!<Alternate bytes on two lines*/
+#define QSPI_ALTERNATE_BYTES_4_LINES   ((uint32_t)QUADSPI_CCR_ABMODE)   /*!<Alternate bytes on four lines*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_DataMode QSPI Data Mode
+  * @{
+  */
+#define QSPI_DATA_NONE                 ((uint32_t)0X00000000)           /*!<No data*/
+#define QSPI_DATA_1_LINE               ((uint32_t)QUADSPI_CCR_DMODE_0) /*!<Data on a single line*/
+#define QSPI_DATA_2_LINES              ((uint32_t)QUADSPI_CCR_DMODE_1) /*!<Data on two lines*/
+#define QSPI_DATA_4_LINES              ((uint32_t)QUADSPI_CCR_DMODE)   /*!<Data on four lines*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_DdrMode QSPI Ddr Mode
+  * @{
+  */
+#define QSPI_DDR_MODE_DISABLE              ((uint32_t)0x00000000)       /*!<Double data rate mode disabled*/
+#define QSPI_DDR_MODE_ENABLE               ((uint32_t)QUADSPI_CCR_DDRM) /*!<Double data rate mode enabled*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_DdrHoldHalfCycle QSPI Ddr HoldHalfCycle
+  * @{
+  */
+#define QSPI_DDR_HHC_ANALOG_DELAY           ((uint32_t)0x00000000)       /*!<Delay the data output using analog delay in DDR mode*/
+#define QSPI_DDR_HHC_HALF_CLK_DELAY         ((uint32_t)QUADSPI_CCR_DHHC) /*!<Delay the data output by 1/2 clock cycle in DDR mode*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_SIOOMode QSPI SIOO Mode
+  * @{
+  */
+#define QSPI_SIOO_INST_EVERY_CMD       ((uint32_t)0x00000000)       /*!<Send instruction on every transaction*/
+#define QSPI_SIOO_INST_ONLY_FIRST_CMD  ((uint32_t)QUADSPI_CCR_SIOO) /*!<Send instruction only for the first command*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_MatchMode QSPI Match Mode
+  * @{
+  */
+#define QSPI_MATCH_MODE_AND                 ((uint32_t)0x00000000)     /*!<AND match mode between unmasked bits*/
+#define QSPI_MATCH_MODE_OR                  ((uint32_t)QUADSPI_CR_PMM) /*!<OR match mode between unmasked bits*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_AutomaticStop QSPI Automatic Stop
+  * @{
+  */
+#define QSPI_AUTOMATIC_STOP_DISABLE        ((uint32_t)0x00000000)      /*!<AutoPolling stops only with abort or QSPI disabling*/
+#define QSPI_AUTOMATIC_STOP_ENABLE         ((uint32_t)QUADSPI_CR_APMS) /*!<AutoPolling stops as soon as there is a match*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_TimeOutActivation QSPI TimeOut Activation
+  * @{
+  */
+#define QSPI_TIMEOUT_COUNTER_DISABLE       ((uint32_t)0x00000000)      /*!<Timeout counter disabled, nCS remains active*/
+#define QSPI_TIMEOUT_COUNTER_ENABLE        ((uint32_t)QUADSPI_CR_TCEN) /*!<Timeout counter enabled, nCS released when timeout expires*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Flags  QSPI Flags
+  * @{
+  */
+#define QSPI_FLAG_BUSY                      QUADSPI_SR_BUSY /*!<Busy flag: operation is ongoing*/
+#define QSPI_FLAG_TO                        QUADSPI_SR_TOF  /*!<Timeout flag: timeout occurs in memory-mapped mode*/
+#define QSPI_FLAG_SM                        QUADSPI_SR_SMF  /*!<Status match flag: received data matches in autopolling mode*/
+#define QSPI_FLAG_FT                        QUADSPI_SR_FTF  /*!<Fifo threshold flag: Fifo threshold reached or data left after read from memory is complete*/
+#define QSPI_FLAG_TC                        QUADSPI_SR_TCF  /*!<Transfer complete flag: programmed number of data have been transferred or the transfer has been aborted*/
+#define QSPI_FLAG_TE                        QUADSPI_SR_TEF  /*!<Transfer error flag: invalid address is being accessed*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Interrupts  QSPI Interrupts
+  * @{
+  */
+#define QSPI_IT_TO                          QUADSPI_CR_TOIE /*!<Interrupt on the timeout flag*/
+#define QSPI_IT_SM                          QUADSPI_CR_SMIE /*!<Interrupt on the status match flag*/
+#define QSPI_IT_FT                          QUADSPI_CR_FTIE /*!<Interrupt on the fifo threshold flag*/
+#define QSPI_IT_TC                          QUADSPI_CR_TCIE /*!<Interrupt on the transfer complete flag*/
+#define QSPI_IT_TE                          QUADSPI_CR_TEIE /*!<Interrupt on the transfer error flag*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Timeout_definition QSPI Timeout definition
+  * @{
+  */
+#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE ((uint32_t)5000)/* 5 s */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Macros QSPI Exported Macros
+  * @{
+  */
+
+/** @brief Reset QSPI handle state
+  * @param  __HANDLE__: QSPI handle.
+  * @retval None
+  */
+#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__)           ((__HANDLE__)->State = HAL_QSPI_STATE_RESET)
+
+/** @brief  Enable QSPI
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @retval None
+  */
+#define __HAL_QSPI_ENABLE(__HANDLE__)                       SET_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief  Disable QSPI
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @retval None
+  */
+#define __HAL_QSPI_DISABLE(__HANDLE__)                      CLEAR_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief  Enables the specified QSPI interrupt.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __INTERRUPT__: specifies the QSPI interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_IT_TO: QSPI Time out interrupt
+  *            @arg QSPI_IT_SM: QSPI Status match interrupt
+  *            @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+  *            @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+  *            @arg QSPI_IT_TE: QSPI Transfer error interrupt
+  * @retval None
+  */
+#define __HAL_QSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__)     SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+
+/** @brief  Disables the specified QSPI interrupt.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __INTERRUPT__: specifies the QSPI interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_IT_TO: QSPI Timeout interrupt
+  *            @arg QSPI_IT_SM: QSPI Status match interrupt
+  *            @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+  *            @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+  *            @arg QSPI_IT_TE: QSPI Transfer error interrupt
+  * @retval None
+  */
+#define __HAL_QSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__)    CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+/** @brief  Checks whether the specified QSPI interrupt source is enabled.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __INTERRUPT__: specifies the QSPI interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_IT_TO: QSPI Time out interrupt
+  *            @arg QSPI_IT_SM: QSPI Status match interrupt
+  *            @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+  *            @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+  *            @arg QSPI_IT_TE: QSPI Transfer error interrupt
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_QSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @brief  Get the selected QSPI's flag status.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __FLAG__: specifies the QSPI flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_FLAG_BUSY: QSPI Busy flag
+  *            @arg QSPI_FLAG_TO:   QSPI Time out flag
+  *            @arg QSPI_FLAG_SM:   QSPI Status match flag
+  *            @arg QSPI_FLAG_FT:   QSPI FIFO threshold flag
+  *            @arg QSPI_FLAG_TC:   QSPI Transfer complete flag
+  *            @arg QSPI_FLAG_TE:   QSPI Transfer error flag
+  * @retval None
+  */
+#define __HAL_QSPI_GET_FLAG(__HANDLE__, __FLAG__)           (READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) != 0)
+
+/** @brief  Clears the specified QSPI's flag status.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __FLAG__: specifies the QSPI clear register flag that needs to be set
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_FLAG_TO: QSPI Time out flag
+  *            @arg QSPI_FLAG_SM: QSPI Status match flag
+  *            @arg QSPI_FLAG_TC: QSPI Transfer complete flag
+  *            @arg QSPI_FLAG_TE: QSPI Transfer error flag
+  * @retval None
+  */
+#define __HAL_QSPI_CLEAR_FLAG(__HANDLE__, __FLAG__)         WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup QSPI_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef     HAL_QSPI_Init     (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef     HAL_QSPI_DeInit   (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_MspInit  (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi);
+/**
+  * @}
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+/* QSPI IRQ handler method */
+void                  HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+HAL_StatusTypeDef     HAL_QSPI_Command      (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_Transmit     (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_Receive      (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_Command_IT   (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd);
+HAL_StatusTypeDef     HAL_QSPI_Transmit_IT  (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef     HAL_QSPI_Receive_IT   (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef     HAL_QSPI_Transmit_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef     HAL_QSPI_Receive_DMA  (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+
+/* QSPI status flag polling mode */
+HAL_StatusTypeDef     HAL_QSPI_AutoPolling   (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg);
+
+/* QSPI memory-mapped mode */
+HAL_StatusTypeDef     HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg);
+/**
+  * @}
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group3
+  * @{
+  */
+/* Callback functions in non-blocking modes ***********************************/
+void                  HAL_QSPI_ErrorCallback        (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+void                  HAL_QSPI_CmdCpltCallback      (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_RxCpltCallback       (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_TxCpltCallback       (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_RxHalfCpltCallback   (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_TxHalfCpltCallback   (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI status flag polling mode */
+void                  HAL_QSPI_StatusMatchCallback  (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI memory-mapped mode */
+void                  HAL_QSPI_TimeOutCallback      (QSPI_HandleTypeDef *hqspi);
+/**
+  * @}
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral Control and State functions  ************************************/
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState(QSPI_HandleTypeDef *hqspi);
+uint32_t              HAL_QSPI_GetError(QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef     HAL_QSPI_Abort   (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_SetTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup QSPI_Private_Constants QSPI Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup QSPI_Private_Macros QSPI Private Macros
+  * @{
+  */
+/** @defgroup QSPI_ClockPrescaler QSPI Clock Prescaler
+  * @{
+  */
+#define IS_QSPI_CLOCK_PRESCALER(PRESCALER)  ((PRESCALER) <= 0xFF)
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_FifoThreshold  QSPI Fifo Threshold
+  * @{
+  */
+#define IS_QSPI_FIFO_THRESHOLD(THR)         (((THR) > 0) && ((THR) <= 32))
+/**
+  * @}
+  */
+
+#define IS_QSPI_SSHIFT(SSHIFT)              (((SSHIFT) == QSPI_SAMPLE_SHIFTING_NONE) || \
+                                             ((SSHIFT) == QSPI_SAMPLE_SHIFTING_HALFCYCLE))
+
+/** @defgroup QSPI_FlashSize QSPI Flash Size
+  * @{
+  */
+#define IS_QSPI_FLASH_SIZE(FSIZE)           (((FSIZE) <= 31))
+/**
+  * @}
+  */
+
+#define IS_QSPI_CS_HIGH_TIME(CSHTIME)       (((CSHTIME) == QSPI_CS_HIGH_TIME_1_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_2_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_3_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_4_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_5_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_6_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_7_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_8_CYCLE))
+
+#define IS_QSPI_CLOCK_MODE(CLKMODE)         (((CLKMODE) == QSPI_CLOCK_MODE_0) || \
+                                             ((CLKMODE) == QSPI_CLOCK_MODE_3))
+
+#define IS_QSPI_FLASH_ID(FLA)    (((FLA) == QSPI_FLASH_ID_1) || \
+                                  ((FLA) == QSPI_FLASH_ID_2))
+
+#define IS_QSPI_DUAL_FLASH_MODE(MODE)    (((MODE) == QSPI_DUALFLASH_ENABLE) || \
+                                          ((MODE) == QSPI_DUALFLASH_DISABLE))
+
+
+/** @defgroup QSPI_Instruction QSPI Instruction
+  * @{
+  */
+#define IS_QSPI_INSTRUCTION(INSTRUCTION)    ((INSTRUCTION) <= 0xFF)
+/**
+  * @}
+  */
+
+#define IS_QSPI_ADDRESS_SIZE(ADDR_SIZE)     (((ADDR_SIZE) == QSPI_ADDRESS_8_BITS)  || \
+                                             ((ADDR_SIZE) == QSPI_ADDRESS_16_BITS) || \
+                                             ((ADDR_SIZE) == QSPI_ADDRESS_24_BITS) || \
+                                             ((ADDR_SIZE) == QSPI_ADDRESS_32_BITS))
+
+#define IS_QSPI_ALTERNATE_BYTES_SIZE(SIZE)  (((SIZE) == QSPI_ALTERNATE_BYTES_8_BITS)  || \
+                                             ((SIZE) == QSPI_ALTERNATE_BYTES_16_BITS) || \
+                                             ((SIZE) == QSPI_ALTERNATE_BYTES_24_BITS) || \
+                                             ((SIZE) == QSPI_ALTERNATE_BYTES_32_BITS))
+
+
+/** @defgroup QSPI_DummyCycles QSPI Dummy Cycles
+  * @{
+  */
+#define IS_QSPI_DUMMY_CYCLES(DCY)           ((DCY) <= 31)
+/**
+  * @}
+  */
+
+#define IS_QSPI_INSTRUCTION_MODE(MODE)      (((MODE) == QSPI_INSTRUCTION_NONE)    || \
+                                             ((MODE) == QSPI_INSTRUCTION_1_LINE)  || \
+                                             ((MODE) == QSPI_INSTRUCTION_2_LINES) || \
+                                             ((MODE) == QSPI_INSTRUCTION_4_LINES))
+
+#define IS_QSPI_ADDRESS_MODE(MODE)          (((MODE) == QSPI_ADDRESS_NONE)    || \
+                                             ((MODE) == QSPI_ADDRESS_1_LINE)  || \
+                                             ((MODE) == QSPI_ADDRESS_2_LINES) || \
+                                             ((MODE) == QSPI_ADDRESS_4_LINES))
+
+#define IS_QSPI_ALTERNATE_BYTES_MODE(MODE)  (((MODE) == QSPI_ALTERNATE_BYTES_NONE)    || \
+                                             ((MODE) == QSPI_ALTERNATE_BYTES_1_LINE)  || \
+                                             ((MODE) == QSPI_ALTERNATE_BYTES_2_LINES) || \
+                                             ((MODE) == QSPI_ALTERNATE_BYTES_4_LINES))
+
+#define IS_QSPI_DATA_MODE(MODE)             (((MODE) == QSPI_DATA_NONE)    || \
+                                             ((MODE) == QSPI_DATA_1_LINE)  || \
+                                             ((MODE) == QSPI_DATA_2_LINES) || \
+                                             ((MODE) == QSPI_DATA_4_LINES))
+
+#define IS_QSPI_DDR_MODE(DDR_MODE)          (((DDR_MODE) == QSPI_DDR_MODE_DISABLE) || \
+                                             ((DDR_MODE) == QSPI_DDR_MODE_ENABLE))
+
+#define IS_QSPI_DDR_HHC(DDR_HHC)            (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY) || \
+                                             ((DDR_HHC) == QSPI_DDR_HHC_HALF_CLK_DELAY))
+
+#define IS_QSPI_SIOO_MODE(SIOO_MODE)      (((SIOO_MODE) == QSPI_SIOO_INST_EVERY_CMD) || \
+                                             ((SIOO_MODE) == QSPI_SIOO_INST_ONLY_FIRST_CMD))
+
+/** @defgroup QSPI_Interval QSPI Interval
+  * @{
+  */
+#define IS_QSPI_INTERVAL(INTERVAL)        ((INTERVAL) <= QUADSPI_PIR_INTERVAL)
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_StatusBytesSize QSPI Status Bytes Size
+  * @{
+  */
+#define IS_QSPI_STATUS_BYTES_SIZE(SIZE)   (((SIZE) >= 1) && ((SIZE) <= 4))
+/**
+  * @}
+  */
+#define IS_QSPI_MATCH_MODE(MODE)            (((MODE) == QSPI_MATCH_MODE_AND) || \
+                                             ((MODE) == QSPI_MATCH_MODE_OR))
+
+#define IS_QSPI_AUTOMATIC_STOP(APMS)        (((APMS) == QSPI_AUTOMATIC_STOP_DISABLE) || \
+                                             ((APMS) == QSPI_AUTOMATIC_STOP_ENABLE))
+
+#define IS_QSPI_TIMEOUT_ACTIVATION(TCEN)    (((TCEN) == QSPI_TIMEOUT_COUNTER_DISABLE) || \
+                                             ((TCEN) == QSPI_TIMEOUT_COUNTER_ENABLE))
+
+/** @defgroup QSPI_TimeOutPeriod  QSPI TimeOut Period
+  * @{
+  */
+#define IS_QSPI_TIMEOUT_PERIOD(PERIOD)      ((PERIOD) <= 0xFFFF)
+/**
+  * @}
+  */
+
+#define IS_QSPI_GET_FLAG(FLAG)              (((FLAG) == QSPI_FLAG_BUSY) || \
+                                             ((FLAG) == QSPI_FLAG_TO)   || \
+                                             ((FLAG) == QSPI_FLAG_SM)   || \
+                                             ((FLAG) == QSPI_FLAG_FT)   || \
+                                             ((FLAG) == QSPI_FLAG_TC)   || \
+                                             ((FLAG) == QSPI_FLAG_TE))
+
+#define IS_QSPI_IT(IT)                      ((((IT) & (uint32_t)0xFFE0FFFF) == 0x00000000) && ((IT) != 0x00000000))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup QSPI_Private_Functions QSPI Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_QSPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h
new file mode 100644
index 0000000..1b470c7
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h
@@ -0,0 +1,1537 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rcc.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of RCC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RCC_H
+#define __STM32F4xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/* Include RCC HAL Extended module */
+/* (include on top of file since RCC structures are defined in extended file) */
+#include "stm32f4xx_hal_rcc_ex.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RCC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Types RCC Exported Types
+  * @{
+  */
+
+/**
+  * @brief  RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+  */
+typedef struct
+{
+  uint32_t OscillatorType;       /*!< The oscillators to be configured.
+                                      This parameter can be a value of @ref RCC_Oscillator_Type                   */
+
+  uint32_t HSEState;             /*!< The new state of the HSE.
+                                      This parameter can be a value of @ref RCC_HSE_Config                        */
+
+  uint32_t LSEState;             /*!< The new state of the LSE.
+                                      This parameter can be a value of @ref RCC_LSE_Config                        */
+
+  uint32_t HSIState;             /*!< The new state of the HSI.
+                                      This parameter can be a value of @ref RCC_HSI_Config                        */
+
+  uint32_t HSICalibrationValue;  /*!< The calibration trimming value.
+                                      This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+  uint32_t LSIState;             /*!< The new state of the LSI.
+                                      This parameter can be a value of @ref RCC_LSI_Config                        */
+
+  RCC_PLLInitTypeDef PLL;        /*!< PLL structure parameters                                                    */
+
+}RCC_OscInitTypeDef;
+
+/**
+  * @brief  RCC System, AHB and APB busses clock configuration structure definition
+  */
+typedef struct
+{
+  uint32_t ClockType;             /*!< The clock to be configured.
+                                       This parameter can be a value of @ref RCC_System_Clock_Type      */
+
+  uint32_t SYSCLKSource;          /*!< The clock source (SYSCLKS) used as system clock.
+                                       This parameter can be a value of @ref RCC_System_Clock_Source    */
+
+  uint32_t AHBCLKDivider;         /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+                                       This parameter can be a value of @ref RCC_AHB_Clock_Source       */
+
+  uint32_t APB1CLKDivider;        /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+                                       This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+  uint32_t APB2CLKDivider;        /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+                                       This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+  * @{
+  */
+
+/** @defgroup RCC_Oscillator_Type Oscillator Type
+  * @{
+  */
+#define RCC_OSCILLATORTYPE_NONE            ((uint32_t)0x00000000)
+#define RCC_OSCILLATORTYPE_HSE             ((uint32_t)0x00000001)
+#define RCC_OSCILLATORTYPE_HSI             ((uint32_t)0x00000002)
+#define RCC_OSCILLATORTYPE_LSE             ((uint32_t)0x00000004)
+#define RCC_OSCILLATORTYPE_LSI             ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_HSE_Config HSE Config
+  * @{
+  */
+#define RCC_HSE_OFF                      ((uint8_t)0x00)
+#define RCC_HSE_ON                       ((uint8_t)0x01)
+#define RCC_HSE_BYPASS                   ((uint8_t)0x05)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_LSE_Config LSE Config
+  * @{
+  */
+#define RCC_LSE_OFF                      ((uint8_t)0x00)
+#define RCC_LSE_ON                       ((uint8_t)0x01)
+#define RCC_LSE_BYPASS                   ((uint8_t)0x05)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_HSI_Config HSI Config
+  * @{
+  */
+#define RCC_HSI_OFF                      ((uint8_t)0x00)
+#define RCC_HSI_ON                       ((uint8_t)0x01)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_LSI_Config LSI Config
+  * @{
+  */
+#define RCC_LSI_OFF                      ((uint8_t)0x00)
+#define RCC_LSI_ON                       ((uint8_t)0x01)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_PLL_Config PLL Config
+  * @{
+  */
+#define RCC_PLL_NONE                      ((uint8_t)0x00)
+#define RCC_PLL_OFF                       ((uint8_t)0x01)
+#define RCC_PLL_ON                        ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider
+  * @{
+  */
+#define RCC_PLLP_DIV2                  ((uint32_t)0x00000002)
+#define RCC_PLLP_DIV4                  ((uint32_t)0x00000004)
+#define RCC_PLLP_DIV6                  ((uint32_t)0x00000006)
+#define RCC_PLLP_DIV8                  ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
+  * @{
+  */
+#define RCC_PLLSOURCE_HSI                RCC_PLLCFGR_PLLSRC_HSI
+#define RCC_PLLSOURCE_HSE                RCC_PLLCFGR_PLLSRC_HSE
+/**
+  * @}
+  */
+
+/** @defgroup RCC_System_Clock_Type System Clock Type
+  * @{
+  */
+#define RCC_CLOCKTYPE_SYSCLK             ((uint32_t)0x00000001)
+#define RCC_CLOCKTYPE_HCLK               ((uint32_t)0x00000002)
+#define RCC_CLOCKTYPE_PCLK1              ((uint32_t)0x00000004)
+#define RCC_CLOCKTYPE_PCLK2              ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_System_Clock_Source System Clock Source
+  * @{
+  */
+#define RCC_SYSCLKSOURCE_HSI             RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE             RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK          RCC_CFGR_SW_PLL
+#define RCC_SYSCLKSOURCE_PLLRCLK         ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
+  * @{
+  */
+#define RCC_SYSCLKSOURCE_STATUS_HSI     RCC_CFGR_SWS_HSI   /*!< HSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSE     RCC_CFGR_SWS_HSE   /*!< HSE used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK  RCC_CFGR_SWS_PLL   /*!< PLL used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1))   /*!< PLLR used as system clock */
+/**
+  * @}
+  */
+
+/** @defgroup RCC_AHB_Clock_Source AHB Clock Source
+  * @{
+  */
+#define RCC_SYSCLK_DIV1                  RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2                  RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4                  RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8                  RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16                 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64                 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128                RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256                RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512                RCC_CFGR_HPRE_DIV512
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source APB1/APB2 Clock Source
+  * @{
+  */
+#define RCC_HCLK_DIV1                    RCC_CFGR_PPRE1_DIV1
+#define RCC_HCLK_DIV2                    RCC_CFGR_PPRE1_DIV2
+#define RCC_HCLK_DIV4                    RCC_CFGR_PPRE1_DIV4
+#define RCC_HCLK_DIV8                    RCC_CFGR_PPRE1_DIV8
+#define RCC_HCLK_DIV16                   RCC_CFGR_PPRE1_DIV16
+/**
+  * @}
+  */
+
+/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
+  * @{
+  */
+#define RCC_RTCCLKSOURCE_LSE             ((uint32_t)0x00000100)
+#define RCC_RTCCLKSOURCE_LSI             ((uint32_t)0x00000200)
+#define RCC_RTCCLKSOURCE_HSE_DIV2        ((uint32_t)0x00020300)
+#define RCC_RTCCLKSOURCE_HSE_DIV3        ((uint32_t)0x00030300)
+#define RCC_RTCCLKSOURCE_HSE_DIV4        ((uint32_t)0x00040300)
+#define RCC_RTCCLKSOURCE_HSE_DIV5        ((uint32_t)0x00050300)
+#define RCC_RTCCLKSOURCE_HSE_DIV6        ((uint32_t)0x00060300)
+#define RCC_RTCCLKSOURCE_HSE_DIV7        ((uint32_t)0x00070300)
+#define RCC_RTCCLKSOURCE_HSE_DIV8        ((uint32_t)0x00080300)
+#define RCC_RTCCLKSOURCE_HSE_DIV9        ((uint32_t)0x00090300)
+#define RCC_RTCCLKSOURCE_HSE_DIV10       ((uint32_t)0x000A0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV11       ((uint32_t)0x000B0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV12       ((uint32_t)0x000C0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV13       ((uint32_t)0x000D0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV14       ((uint32_t)0x000E0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV15       ((uint32_t)0x000F0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV16       ((uint32_t)0x00100300)
+#define RCC_RTCCLKSOURCE_HSE_DIV17       ((uint32_t)0x00110300)
+#define RCC_RTCCLKSOURCE_HSE_DIV18       ((uint32_t)0x00120300)
+#define RCC_RTCCLKSOURCE_HSE_DIV19       ((uint32_t)0x00130300)
+#define RCC_RTCCLKSOURCE_HSE_DIV20       ((uint32_t)0x00140300)
+#define RCC_RTCCLKSOURCE_HSE_DIV21       ((uint32_t)0x00150300)
+#define RCC_RTCCLKSOURCE_HSE_DIV22       ((uint32_t)0x00160300)
+#define RCC_RTCCLKSOURCE_HSE_DIV23       ((uint32_t)0x00170300)
+#define RCC_RTCCLKSOURCE_HSE_DIV24       ((uint32_t)0x00180300)
+#define RCC_RTCCLKSOURCE_HSE_DIV25       ((uint32_t)0x00190300)
+#define RCC_RTCCLKSOURCE_HSE_DIV26       ((uint32_t)0x001A0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV27       ((uint32_t)0x001B0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV28       ((uint32_t)0x001C0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV29       ((uint32_t)0x001D0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV30       ((uint32_t)0x001E0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV31       ((uint32_t)0x001F0300)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_I2S_Clock_Source I2S Clock Source
+  * @{
+  */
+#define RCC_I2SCLKSOURCE_PLLI2S         ((uint32_t)0x00000000)
+#define RCC_I2SCLKSOURCE_EXT            ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_MCO_Index MCO Index
+  * @{
+  */
+#define RCC_MCO1                         ((uint32_t)0x00000000)
+#define RCC_MCO2                         ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source
+  * @{
+  */
+#define RCC_MCO1SOURCE_HSI               ((uint32_t)0x00000000)
+#define RCC_MCO1SOURCE_LSE               RCC_CFGR_MCO1_0
+#define RCC_MCO1SOURCE_HSE               RCC_CFGR_MCO1_1
+#define RCC_MCO1SOURCE_PLLCLK            RCC_CFGR_MCO1
+/**
+  * @}
+  */
+
+/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source
+  * @{
+  */
+#define RCC_MCO2SOURCE_SYSCLK            ((uint32_t)0x00000000)
+#define RCC_MCO2SOURCE_PLLI2SCLK         RCC_CFGR_MCO2_0
+#define RCC_MCO2SOURCE_HSE               RCC_CFGR_MCO2_1
+#define RCC_MCO2SOURCE_PLLCLK            RCC_CFGR_MCO2
+/**
+  * @}
+  */
+
+/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler
+  * @{
+  */
+#define RCC_MCODIV_1                    ((uint32_t)0x00000000)
+#define RCC_MCODIV_2                    RCC_CFGR_MCO1PRE_2
+#define RCC_MCODIV_3                    ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_4                    ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_5                    RCC_CFGR_MCO1PRE
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Interrupt Interrupts
+  * @{
+  */
+#define RCC_IT_LSIRDY                    ((uint8_t)0x01)
+#define RCC_IT_LSERDY                    ((uint8_t)0x02)
+#define RCC_IT_HSIRDY                    ((uint8_t)0x04)
+#define RCC_IT_HSERDY                    ((uint8_t)0x08)
+#define RCC_IT_PLLRDY                    ((uint8_t)0x10)
+#define RCC_IT_PLLI2SRDY                 ((uint8_t)0x20)
+#define RCC_IT_CSS                       ((uint8_t)0x80)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Flag Flags
+  *        Elements values convention: 0XXYYYYYb
+  *           - YYYYY  : Flag position in the register
+  *           - 0XX  : Register index
+  *                 - 01: CR register
+  *                 - 10: BDCR register
+  *                 - 11: CSR register
+  * @{
+  */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY                  ((uint8_t)0x21)
+#define RCC_FLAG_HSERDY                  ((uint8_t)0x31)
+#define RCC_FLAG_PLLRDY                  ((uint8_t)0x39)
+#define RCC_FLAG_PLLI2SRDY               ((uint8_t)0x3B)
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY                  ((uint8_t)0x41)
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY                  ((uint8_t)0x61)
+#define RCC_FLAG_BORRST                  ((uint8_t)0x79)
+#define RCC_FLAG_PINRST                  ((uint8_t)0x7A)
+#define RCC_FLAG_PORRST                  ((uint8_t)0x7B)
+#define RCC_FLAG_SFTRST                  ((uint8_t)0x7C)
+#define RCC_FLAG_IWDGRST                 ((uint8_t)0x7D)
+#define RCC_FLAG_WWDGRST                 ((uint8_t)0x7E)
+#define RCC_FLAG_LPWRRST                 ((uint8_t)0x7F)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+  * @{
+  */
+
+/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+  * @brief  Enable or disable the AHB1 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+#define __HAL_RCC_GPIOA_CLK_ENABLE()	do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_GPIOB_CLK_ENABLE()	do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_GPIOC_CLK_ENABLE()	do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_GPIOD_CLK_ENABLE()	do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE()	do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_GPIOH_CLK_ENABLE()	do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE()  	do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE()	do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE()  do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_DMA1_CLK_ENABLE() 	do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_DMA2_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+
+#define __HAL_RCC_GPIOA_CLK_DISABLE()        (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
+#define __HAL_RCC_GPIOB_CLK_DISABLE()        (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
+#define __HAL_RCC_GPIOC_CLK_DISABLE()        (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN))
+#define __HAL_RCC_GPIOD_CLK_DISABLE()        (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE()        (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOH_CLK_DISABLE()        (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
+#define __HAL_RCC_CRC_CLK_DISABLE()          (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE()      (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+#define __HAL_RCC_DMA1_CLK_DISABLE()         (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN))
+#define __HAL_RCC_DMA2_CLK_DISABLE()         (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+  * @brief  Enable or disable the AHB2 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE()  do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+                                               __HAL_RCC_SYSCFG_CLK_ENABLE();\
+                                              }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() do { (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN));\
+                                                __HAL_RCC_SYSCFG_CLK_DISABLE();\
+                                              }while(0)
+
+#define __HAL_RCC_RNG_CLK_ENABLE()    (RCC->AHB2ENR |= (RCC_AHB2ENR_RNGEN))
+#define __HAL_RCC_RNG_CLK_DISABLE()   (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+  * @brief  Enable or disable the Low Speed APB (APB1) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+#define __HAL_RCC_TIM2_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_TIM5_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_WWDG_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_SPI2_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_USART2_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_I2C1_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_I2C2_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_PWR_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_TIM5_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __HAL_RCC_WWDG_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_SPI2_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_I2C1_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_PWR_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+  * @brief  Enable or disable the High Speed APB (APB2) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+#define __HAL_RCC_TIM1_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_USART1_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_USART6_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_ADC1_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_SDIO_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_SPI1_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_SYSCFG_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_TIM9_CLK_ENABLE()     do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE()    do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+#define __HAL_RCC_TIM11_CLK_ENABLE()    do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+                                        UNUSED(tmpreg); \
+					} while(0)
+
+#define __HAL_RCC_TIM1_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+#define __HAL_RCC_ADC1_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_SDIO_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI1_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_SPI4_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __HAL_RCC_TIM9_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE()  (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM11_CLK_DISABLE()  (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Force Release Reset
+  * @brief  Force or release AHB1 peripheral reset.
+  * @{
+  */
+#define __HAL_RCC_AHB1_FORCE_RESET()    (RCC->AHB1RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_GPIOA_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOH_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_CRC_FORCE_RESET()     (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_DMA1_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
+#define __HAL_RCC_DMA2_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
+
+#define __HAL_RCC_AHB1_RELEASE_RESET()  (RCC->AHB1RSTR = 0x00)
+#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_CRC_RELEASE_RESET()   (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_DMA1_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST))
+#define __HAL_RCC_DMA2_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_AHB2_Force_Release_Reset AHB2 Force Release Reset
+  * @brief  Force or release AHB2 peripheral reset.
+  * @{
+  */
+#define __HAL_RCC_AHB2_FORCE_RESET()    (RCC->AHB2RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET()   (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET()  (RCC->AHB2RSTR = 0x00)
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_RNG_FORCE_RESET()    (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_RNG_RELEASE_RESET()  (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset
+  * @brief  Force or release APB1 peripheral reset.
+  * @{
+  */
+#define __HAL_RCC_APB1_FORCE_RESET()     (RCC->APB1RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_TIM2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_WWDG_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_SPI2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_USART2_FORCE_RESET()   (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_I2C1_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_PWR_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET()   (RCC->APB1RSTR = 0x00)
+#define __HAL_RCC_TIM2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_WWDG_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_SPI2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_I2C1_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_PWR_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset
+  * @brief  Force or release APB2 peripheral reset.
+  * @{
+  */
+#define __HAL_RCC_APB2_FORCE_RESET()     (RCC->APB2RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_TIM1_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_USART1_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_FORCE_RESET()      (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SDIO_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI1_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SPI4_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_SYSCFG_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_TIM9_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM10_FORCE_RESET()    (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM11_FORCE_RESET()    (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET()   (RCC->APB2RSTR = 0x00)
+#define __HAL_RCC_TIM1_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_RELEASE_RESET()    (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SDIO_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI1_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SPI4_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_TIM9_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET()  (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM11_RELEASE_RESET()  (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_AHB3_Force_Release_Reset AHB3 Force Release Reset
+  * @brief  Force or release AHB3 peripheral reset.
+  * @{
+  */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+  * @brief  Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wake-up from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  * @{
+  */
+#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE()    (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE()    (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE()    (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE()    (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE()    (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE()    (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE()    (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE()    (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE()  (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE()     (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE()     (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
+
+#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE()   (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE()   (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE()   (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE()   (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE()   (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE()   (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE()   (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE()   (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE()    (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE()    (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+  * @brief  Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wake-up from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  * @{
+  */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE()  (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE()   (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE()   (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE()  (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+  * @brief  Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wake-up from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  * @{
+  */
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE()  (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE()     (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE()    (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+  * @brief  Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wake-up from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  * @{
+  */
+#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE()  (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE()  (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE()  (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()   (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE()   (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN))
+
+#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()  (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE()  (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_HSI_Configuration HSI Configuration
+  * @{
+  */
+
+/** @brief  Macros to enable or disable the Internal High Speed oscillator (HSI).
+  * @note   The HSI is stopped by hardware when entering STOP and STANDBY modes.
+  *         It is used (enabled by hardware) as system clock source after startup
+  *         from Reset, wake-up from STOP and STANDBY mode, or in case of failure
+  *         of the HSE used directly or indirectly as system clock (if the Clock
+  *         Security System CSS is enabled).
+  * @note   HSI can not be stopped if it is used as system clock source. In this case,
+  *         you have to select another source of the system clock then stop the HSI.
+  * @note   After enabling the HSI, the application software should wait on HSIRDY
+  *         flag to be set indicating that HSI clock is stable and can be used as
+  *         system clock source.
+  *         This parameter can be: ENABLE or DISABLE.
+  * @note   When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+  *         clock cycles.
+  */
+#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE)
+#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE)
+
+/** @brief  Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+  * @note   The calibration is used to compensate for the variations in voltage
+  *         and temperature that influence the frequency of the internal HSI RC.
+  * @param  __HSICalibrationValue__: specifies the calibration trimming value.
+  *         This parameter must be a number between 0 and 0x1F.
+  */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\
+        RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << POSITION_VAL(RCC_CR_HSITRIM)))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_LSI_Configuration LSI Configuration
+  * @{
+  */
+
+/** @brief  Macros to enable or disable the Internal Low Speed oscillator (LSI).
+  * @note   After enabling the LSI, the application software should wait on
+  *         LSIRDY flag to be set indicating that LSI clock is stable and can
+  *         be used to clock the IWDG and/or the RTC.
+  * @note   LSI can not be disabled if the IWDG is running.
+  * @note   When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+  *         clock cycles.
+  */
+#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE)
+#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_HSE_Configuration HSE Configuration
+  * @{
+  */
+
+/**
+  * @brief  Macro to configure the External High Speed oscillator (HSE).
+  * @note   Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not supported by this macro.
+  *         User should request a transition to HSE Off first and then HSE On or HSE Bypass.
+  * @note   After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+  *         software should wait on HSERDY flag to be set indicating that HSE clock
+  *         is stable and can be used to clock the PLL and/or system clock.
+  * @note   HSE state can not be changed if it is used directly or through the
+  *         PLL as system clock. In this case, you have to select another source
+  *         of the system clock then change the HSE state (ex. disable it).
+  * @note   The HSE is stopped by hardware when entering STOP and STANDBY modes.
+  * @note   This function reset the CSSON bit, so if the clock security system(CSS)
+  *         was previously enabled you have to enable it again after calling this
+  *         function.
+  * @param  __STATE__: specifies the new state of the HSE.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+  *                              6 HSE oscillator clock cycles.
+  *            @arg RCC_HSE_ON: turn ON the HSE oscillator.
+  *            @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
+  */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *) RCC_CR_BYTE2_ADDRESS = (__STATE__))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_LSE_Configuration LSE Configuration
+  * @{
+  */
+
+/**
+  * @brief  Macro to configure the External Low Speed oscillator (LSE).
+  * @note   Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro.
+  *         User should request a transition to LSE Off first and then LSE On or LSE Bypass.
+  * @note   As the LSE is in the Backup domain and write access is denied to
+  *         this domain after reset, you have to enable write access using
+  *         HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+  *         (to be done once after reset).
+  * @note   After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+  *         software should wait on LSERDY flag to be set indicating that LSE clock
+  *         is stable and can be used to clock the RTC.
+  * @param  __STATE__: specifies the new state of the LSE.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+  *                              6 LSE oscillator clock cycles.
+  *            @arg RCC_LSE_ON: turn ON the LSE oscillator.
+  *            @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
+  */
+#define __HAL_RCC_LSE_CONFIG(__STATE__)  (*(__IO uint8_t *) RCC_BDCR_BYTE0_ADDRESS = (__STATE__))
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration
+  * @{
+  */
+
+/** @brief  Macros to enable or disable the RTC clock.
+  * @note   These macros must be used only after the RTC clock source was selected.
+  */
+#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE)
+#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE)
+
+/** @brief  Macros to configure the RTC clock (RTCCLK).
+  * @note   As the RTC clock configuration bits are in the Backup domain and write
+  *         access is denied to this domain after reset, you have to enable write
+  *         access using the Power Backup Access macro before to configure
+  *         the RTC clock source (to be done once after reset).
+  * @note   Once the RTC clock is configured it can't be changed unless the
+  *         Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+  *         a Power On Reset (POR).
+  * @param  __RTCCLKSource__: specifies the RTC clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
+  *            @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
+  *            @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected
+  *                                            as RTC clock, where x:[2,31]
+  * @note   If the LSE or LSI is used as RTC clock source, the RTC continues to
+  *         work in STOP and STANDBY modes, and can be used as wake-up source.
+  *         However, when the HSE clock is used as RTC clock source, the RTC
+  *         cannot be used in STOP and STANDBY modes.
+  * @note   The maximum input clock frequency for RTC is 1MHz (when using HSE as
+  *         RTC clock source).
+  */
+#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ?    \
+                                                 MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
+
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__);    \
+                                                    RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF);  \
+                                                   } while (0)
+
+/** @brief  Macros to force or release the Backup domain reset.
+  * @note   This function resets the RTC peripheral (including the backup registers)
+  *         and the RTC clock source selection in RCC_CSR register.
+  * @note   The BKPSRAM is not affected by this reset.
+  */
+#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE)
+#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_PLL_Configuration PLL Configuration
+  * @{
+  */
+
+/** @brief  Macros to enable or disable the main PLL.
+  * @note   After enabling the main PLL, the application software should wait on
+  *         PLLRDY flag to be set indicating that PLL clock is stable and can
+  *         be used as system clock source.
+  * @note   The main PLL can not be disabled if it is used as system clock source
+  * @note   The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+  */
+#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE)
+#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE)
+/**
+  * @}
+  */
+
+/** @brief  Macro to configure the PLL clock source.
+  * @note   This function must be used only when the main PLL is disabled.
+  * @param  __PLLSOURCE__: specifies the PLL entry clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+  *            @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+  *
+  */
+#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__))
+
+/** @brief  Macro to configure the PLL multiplication factor.
+  * @note   This function must be used only when the main PLL is disabled.
+  * @param  __PLLM__: specifies the division factor for PLL VCO input clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+  * @note   You have to set the PLLM parameter correctly to ensure that the VCO input
+  *         frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+  *         of 2 MHz to limit PLL jitter.
+  *
+  */
+#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__))
+
+/** @defgroup RCC_PLL_I2S_Configuration PLL I2S Configuration
+  * @{
+  */
+
+/** @brief Macros to enable or disable the PLLI2S.
+  * @note  The PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
+  */
+#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE)
+#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Get_Clock_source Get Clock source
+  * @{
+  */
+/**
+  * @brief Macro to configure the system clock source.
+  * @param __RCC_SYSCLKSOURCE__: specifies the system clock source.
+  * This parameter can be one of the following values:
+  *              - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source.
+  *              - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source.
+  *              - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source.
+  *              - RCC_SYSCLKSOURCE_PLLRCLK: PLLR output is used as system clock source.
+  */
+#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__))
+
+/** @brief  Macro to get the clock source used as system clock.
+  * @retval The clock source used as system clock. The returned value can be one
+  *         of the following:
+  *              - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock.
+  *              - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock.
+  *              - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock.
+  *              - RCC_SYSCLKSOURCE_STATUS_PLLRCLK: PLLR used as system clock.
+  */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
+
+/** @brief  Macro to get the oscillator used as PLL clock source.
+  * @retval The oscillator used as PLL clock source. The returned value can be one
+  *         of the following:
+  *              - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+  *              - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+  */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
+  * @brief macros to manage the specified RCC Flags and interrupts.
+  * @{
+  */
+
+/** @brief  Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable
+  *         the selected interrupts).
+  * @param  __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
+  *         This parameter can be any combination of the following values:
+  *            @arg RCC_IT_LSIRDY: LSI ready interrupt.
+  *            @arg RCC_IT_LSERDY: LSE ready interrupt.
+  *            @arg RCC_IT_HSIRDY: HSI ready interrupt.
+  *            @arg RCC_IT_HSERDY: HSE ready interrupt.
+  *            @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+  *            @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+  */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable
+  *        the selected interrupts).
+  * @param  __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
+  *         This parameter can be any combination of the following values:
+  *            @arg RCC_IT_LSIRDY: LSI ready interrupt.
+  *            @arg RCC_IT_LSERDY: LSE ready interrupt.
+  *            @arg RCC_IT_HSIRDY: HSI ready interrupt.
+  *            @arg RCC_IT_HSERDY: HSE ready interrupt.
+  *            @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+  *            @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+  */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
+
+/** @brief  Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
+  *         bits to clear the selected interrupt pending bits.
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear.
+  *         This parameter can be any combination of the following values:
+  *            @arg RCC_IT_LSIRDY: LSI ready interrupt.
+  *            @arg RCC_IT_LSERDY: LSE ready interrupt.
+  *            @arg RCC_IT_HSIRDY: HSI ready interrupt.
+  *            @arg RCC_IT_HSERDY: HSE ready interrupt.
+  *            @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+  *            @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+  *            @arg RCC_IT_CSS: Clock Security System interrupt
+  */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief  Check the RCC's interrupt has occurred or not.
+  * @param  __INTERRUPT__: specifies the RCC interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_IT_LSIRDY: LSI ready interrupt.
+  *            @arg RCC_IT_LSERDY: LSE ready interrupt.
+  *            @arg RCC_IT_HSIRDY: HSI ready interrupt.
+  *            @arg RCC_IT_HSERDY: HSE ready interrupt.
+  *            @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+  *            @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+  *            @arg RCC_IT_CSS: Clock Security System interrupt
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST,
+  *        RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST.
+  */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
+
+/** @brief  Check RCC flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready.
+  *            @arg RCC_FLAG_HSERDY: HSE oscillator clock ready.
+  *            @arg RCC_FLAG_PLLRDY: Main PLL clock ready.
+  *            @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready.
+  *            @arg RCC_FLAG_LSERDY: LSE oscillator clock ready.
+  *            @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready.
+  *            @arg RCC_FLAG_BORRST: POR/PDR or BOR reset.
+  *            @arg RCC_FLAG_PINRST: Pin reset.
+  *            @arg RCC_FLAG_PORRST: POR/PDR reset.
+  *            @arg RCC_FLAG_SFTRST: Software reset.
+  *            @arg RCC_FLAG_IWDGRST: Independent Watchdog reset.
+  *            @arg RCC_FLAG_WWDGRST: Window Watchdog reset.
+  *            @arg RCC_FLAG_LPWRRST: Low Power reset.
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define RCC_FLAG_MASK  ((uint8_t)0x1F)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->BDCR :((((__FLAG__) >> 5) == 3)? RCC->CSR :RCC->CIR))) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))!= 0)? 1 : 0)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+ /** @addtogroup RCC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ******************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+/**
+  * @}
+  */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions  ************************************************/
+void     HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void     HAL_RCC_EnableCSS(void);
+void     HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void     HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void     HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CSSCallback(void);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Constants RCC Private Constants
+  * @{
+  */
+
+/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion
+  * @brief RCC registers bit address in the alias region
+  * @{
+  */
+#define RCC_OFFSET                 (RCC_BASE - PERIPH_BASE)
+/* --- CR Register ---*/
+/* Alias word address of HSION bit */
+#define RCC_CR_OFFSET              (RCC_OFFSET + 0x00)
+#define RCC_HSION_BIT_NUMBER       0x00
+#define RCC_CR_HSION_BB            (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_HSION_BIT_NUMBER * 4))
+/* Alias word address of CSSON bit */
+#define RCC_CSSON_BIT_NUMBER       0x13
+#define RCC_CR_CSSON_BB            (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_CSSON_BIT_NUMBER * 4))
+/* Alias word address of PLLON bit */
+#define RCC_PLLON_BIT_NUMBER       0x18
+#define RCC_CR_PLLON_BB            (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLON_BIT_NUMBER * 4))
+/* Alias word address of PLLI2SON bit */
+#define RCC_PLLI2SON_BIT_NUMBER    0x1A
+#define RCC_CR_PLLI2SON_BB         (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLI2SON_BIT_NUMBER * 4))
+
+/* --- CFGR Register ---*/
+/* Alias word address of I2SSRC bit */
+#define RCC_CFGR_OFFSET            (RCC_OFFSET + 0x08)
+#define RCC_I2SSRC_BIT_NUMBER      0x17
+#define RCC_CFGR_I2SSRC_BB         (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_I2SSRC_BIT_NUMBER * 4))
+
+/* --- BDCR Register ---*/
+/* Alias word address of RTCEN bit */
+#define RCC_BDCR_OFFSET            (RCC_OFFSET + 0x70)
+#define RCC_RTCEN_BIT_NUMBER       0x0F
+#define RCC_BDCR_RTCEN_BB          (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RCC_RTCEN_BIT_NUMBER * 4))
+/* Alias word address of BDRST bit */
+#define RCC_BDRST_BIT_NUMBER       0x10
+#define RCC_BDCR_BDRST_BB          (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RCC_BDRST_BIT_NUMBER * 4))
+
+/* --- CSR Register ---*/
+/* Alias word address of LSION bit */
+#define RCC_CSR_OFFSET             (RCC_OFFSET + 0x74)
+#define RCC_LSION_BIT_NUMBER        0x00
+#define RCC_CSR_LSION_BB           (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32) + (RCC_LSION_BIT_NUMBER * 4))
+
+/* CR register byte 3 (Bits[23:16]) base address */
+#define RCC_CR_BYTE2_ADDRESS       ((uint32_t)0x40023802)
+
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS      ((uint32_t)(RCC_BASE + 0x0C + 0x01))
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS      ((uint32_t)(RCC_BASE + 0x0C + 0x02))
+
+/* BDCR register base address */
+#define RCC_BDCR_BYTE0_ADDRESS     (PERIPH_BASE + RCC_BDCR_OFFSET)
+
+#define RCC_DBP_TIMEOUT_VALUE      ((uint32_t)100)
+#define RCC_LSE_TIMEOUT_VALUE      ((uint32_t)5000)
+
+#define HSE_TIMEOUT_VALUE          HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE          ((uint32_t)100)  /* 100 ms */
+#define LSI_TIMEOUT_VALUE          ((uint32_t)100)  /* 100 ms */
+
+#define PLLI2S_TIMEOUT_VALUE       ((uint32_t)100) /* Timeout value fixed to 100 ms  */
+#define PLLSAI_TIMEOUT_VALUE       ((uint32_t)100) /* Timeout value fixed to 100 ms  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCC_Private_Macros RCC Private Macros
+  * @{
+  */
+
+/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters
+  * @{
+  */
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+                         ((HSE) == RCC_HSE_BYPASS))
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+                         ((LSE) == RCC_LSE_BYPASS))
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+                                  ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+                                     ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+                                     ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \
+                                     ((SOURCE) == RCC_SYSCLKSOURCE_PLLRCLK))
+
+#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63)
+
+#define IS_RCC_PLLN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+
+#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8))
+
+#define IS_RCC_PLLQ_VALUE(VALUE) ((4 <= (VALUE)) && ((VALUE) <= 15))
+
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1)   || ((HCLK) == RCC_SYSCLK_DIV2)   || \
+                           ((HCLK) == RCC_SYSCLK_DIV4)   || ((HCLK) == RCC_SYSCLK_DIV8)   || \
+                           ((HCLK) == RCC_SYSCLK_DIV16)  || ((HCLK) == RCC_SYSCLK_DIV64)  || \
+                           ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \
+                           ((HCLK) == RCC_SYSCLK_DIV512))
+
+#define IS_RCC_CLOCKTYPE(CLK) ((1 <= (CLK)) && ((CLK) <= 15))
+
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \
+                           ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \
+                           ((PCLK) == RCC_HCLK_DIV16))
+
+#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2))
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK))
+
+#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \
+                                   ((SOURCE) == RCC_MCO2SOURCE_HSE)    || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1)  || ((DIV) == RCC_MCODIV_2) || \
+                             ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \
+                             ((DIV) == RCC_MCODIV_5))
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h
new file mode 100644
index 0000000..183b89d
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h
@@ -0,0 +1,2707 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rcc_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of RCC HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RCC_EX_H
+#define __STM32F4xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RCCEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+  * @{
+  */
+
+/**
+  * @brief  RCC PLL configuration structure definition
+  */
+typedef struct
+{
+  uint32_t PLLState;   /*!< The new state of the PLL.
+                            This parameter can be a value of @ref RCC_PLL_Config                      */
+
+  uint32_t PLLSource;  /*!< RCC_PLLSource: PLL entry clock source.
+                            This parameter must be a value of @ref RCC_PLL_Clock_Source               */
+
+  uint32_t PLLM;       /*!< PLLM: Division factor for PLL VCO input clock.
+                            This parameter must be a number between Min_Data = 0 and Max_Data = 63    */
+
+  uint32_t PLLN;       /*!< PLLN: Multiplication factor for PLL VCO output clock.
+                            This parameter must be a number between Min_Data = 192 and Max_Data = 432 */
+
+  uint32_t PLLP;       /*!< PLLP: Division factor for main system clock (SYSCLK).
+                            This parameter must be a value of @ref RCC_PLLP_Clock_Divider             */
+
+  uint32_t PLLQ;       /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks.
+                            This parameter must be a number between Min_Data = 4 and Max_Data = 15    */
+#if defined(STM32F446xx)
+  uint32_t PLLR;       /*!< PLLR: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks.
+                            This parameter is only available in STM32F446xx devices.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 7     */
+#endif /* STM32F446xx */
+}RCC_PLLInitTypeDef;
+
+#if defined(STM32F446xx)
+/**
+  * @brief  PLLI2S Clock structure definition
+  */
+typedef struct
+{
+  uint32_t PLLI2SM;    /*!< Specifies division factor for PLL VCO input clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 63       */
+
+  uint32_t PLLI2SN;    /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+                            This parameter must be a number between Min_Data = 192 and Max_Data = 432    */
+
+  uint32_t PLLI2SP;    /*!< Specifies division factor for SPDIFRX Clock.
+                            This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider           */
+
+  uint32_t PLLI2SQ;    /*!< Specifies the division factor for SAI clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+                            This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+  uint32_t PLLI2SR;    /*!< Specifies the division factor for I2S clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+                            This parameter will be used only when PLLI2S is selected as Clock Source I2S */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+  * @brief  PLLSAI Clock structure definition
+  */
+typedef struct
+{
+  uint32_t PLLSAIM;    /*!< Spcifies division factor for PLL VCO input clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 63       */
+
+  uint32_t PLLSAIN;    /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+                            This parameter must be a number between Min_Data = 192 and Max_Data = 432    */
+
+  uint32_t PLLSAIP;    /*!< Specifies division factor for OTG FS, SDIO and RNG clocks.
+                            This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider           */
+
+  uint32_t PLLSAIQ;    /*!< Specifies the division factor for SAI clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+                            This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+}RCC_PLLSAIInitTypeDef;
+/**
+  * @brief  RCC extended clocks structure definition
+  */
+typedef struct
+{
+  uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+                                      This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+  RCC_PLLI2SInitTypeDef PLLI2S;  /*!< PLL I2S structure parameters.
+                                      This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+  RCC_PLLSAIInitTypeDef PLLSAI;  /*!< PLL SAI structure parameters.
+                                      This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+  uint32_t PLLI2SDivQ;           /*!< Specifies the PLLI2S division factor for SAI1 clock.
+                                      This parameter must be a number between Min_Data = 1 and Max_Data = 32
+                                      This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+  uint32_t PLLSAIDivQ;           /*!< Specifies the PLLI2S division factor for SAI1 clock.
+                                      This parameter must be a number between Min_Data = 1 and Max_Data = 32
+                                      This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+  uint32_t Sai1ClockSelection;    /*!< Specifies SAI1 Clock Source Selection.
+                                      This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */
+
+  uint32_t Sai2ClockSelection;    /*!< Specifies SAI2 Clock Source Selection.
+                                      This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */
+
+  uint32_t I2sApb1ClockSelection;    /*!< Specifies I2S APB1 Clock Source Selection.
+                                      This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */
+
+  uint32_t I2sApb2ClockSelection;    /*!< Specifies I2S APB2 Clock Source Selection.
+                                      This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */
+
+  uint32_t RTCClockSelection;      /*!< Specifies RTC Clock Source Selection.
+                                      This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+  uint32_t SdioClockSelection;    /*!< Specifies SDIO Clock Source Selection.
+                                      This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */
+
+  uint32_t CecClockSelection;      /*!< Specifies CEC Clock Source Selection.
+                                      This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+  uint32_t Fmpi2c1ClockSelection;  /*!< Specifies FMPI2C1 Clock Source Selection.
+                                      This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */
+
+  uint32_t SpdifClockSelection;    /*!< Specifies SPDIFRX Clock Source Selection.
+                                      This parameter can be a value of @ref RCCEx_SPDIFRX_Clock_Source */
+
+  uint32_t Clk48ClockSelection;     /*!< Specifies CK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks.
+                                      This parameter can be a value of @ref RCCEx_CK48_Clock_Source */
+
+  uint8_t TIMPresSelection;      /*!< Specifies TIM Clock Source Selection.
+                                      This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/**
+  * @brief  PLLI2S Clock structure definition
+  */
+typedef struct
+{
+  uint32_t PLLI2SN;    /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+                            This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+                            This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+  uint32_t PLLI2SR;    /*!< Specifies the division factor for I2S clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+                            This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+  uint32_t PLLI2SQ;    /*!< Specifies the division factor for SAI1 clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+                            This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+  * @brief  PLLSAI Clock structure definition
+  */
+typedef struct
+{
+  uint32_t PLLSAIN;    /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+                            This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+                            This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+  uint32_t PLLSAIQ;    /*!< Specifies the division factor for SAI1 clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+                            This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+  uint32_t PLLSAIR;    /*!< specifies the division factor for LTDC clock
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+                            This parameter will be used only when PLLSAI is selected as Clock Source LTDC */
+
+}RCC_PLLSAIInitTypeDef;
+/**
+  * @brief  RCC extended clocks structure definition
+  */
+typedef struct
+{
+  uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+                                      This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+  RCC_PLLI2SInitTypeDef PLLI2S;  /*!< PLL I2S structure parameters.
+                                      This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+  RCC_PLLSAIInitTypeDef PLLSAI;  /*!< PLL SAI structure parameters.
+                                      This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+  uint32_t PLLI2SDivQ;           /*!< Specifies the PLLI2S division factor for SAI1 clock.
+                                      This parameter must be a number between Min_Data = 1 and Max_Data = 32
+                                      This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+  uint32_t PLLSAIDivQ;           /*!< Specifies the PLLI2S division factor for SAI1 clock.
+                                      This parameter must be a number between Min_Data = 1 and Max_Data = 32
+                                      This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+  uint32_t PLLSAIDivR;           /*!< Specifies the PLLSAI division factor for LTDC clock.
+                                      This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */
+
+  uint32_t RTCClockSelection;      /*!< Specifies RTC Clock Prescalers Selection.
+                                      This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+  uint8_t TIMPresSelection;      /*!< Specifies TIM Clock Prescalers Selection.
+                                      This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/**
+  * @brief  PLLI2S Clock structure definition
+  */
+typedef struct
+{
+#if defined(STM32F411xE)
+  uint32_t PLLI2SM;    /*!< PLLM: Division factor for PLLI2S VCO input clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 62  */
+#endif /* STM32F411xE */
+
+  uint32_t PLLI2SN;    /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+                            This parameter must be a number between Min_Data = 192 and Max_Data = 432
+                            This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+  uint32_t PLLI2SR;    /*!< Specifies the division factor for I2S clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+                            This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+}RCC_PLLI2SInitTypeDef;
+
+
+/**
+  * @brief  RCC extended clocks structure definition
+  */
+typedef struct
+{
+  uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+                                      This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+  RCC_PLLI2SInitTypeDef PLLI2S;  /*!< PLL I2S structure parameters.
+                                      This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+  uint32_t RTCClockSelection;      /*!< Specifies RTC Clock Prescalers Selection.
+                                       This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+  * @{
+  */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection
+  * @{
+  */
+/*------------------------------- Peripheral Clock source for STM32F446xx -----------------------------*/
+#if defined(STM32F446xx)
+#define RCC_PERIPHCLK_I2S_APB1        ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2S_APB2        ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_SAI1            ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_SAI2            ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_TIM             ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_RTC             ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_CEC             ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_FMPI2C1         ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_CK48            ((uint32_t)0x00000100)
+#define RCC_PERIPHCLK_SDIO            ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_SPDIFRX         ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_PLLI2S          ((uint32_t)0x00000800)
+#endif /* STM32F446xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------- Peripheral Clock source for STM32F42xxx/STM32F43xxx ---------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#define RCC_PERIPHCLK_I2S             ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_SAI_PLLI2S      ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_SAI_PLLSAI      ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_LTDC            ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_TIM             ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_RTC             ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_PLLI2S          ((uint32_t)0x00000040)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*------------------------ Peripheral Clock source for STM32F40xxx/STM32F41xxx ------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define RCC_PERIPHCLK_I2S             ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_RTC             ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_PLLI2S          ((uint32_t)0x00000004)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/*-----------------------------------------------------------------------------------------------------*/
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_PLLSAI_DIVR RCC PLLSAI DIVR
+  * @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+#define RCC_PLLSAIDIVR_2                ((uint32_t)0x00000000)
+#define RCC_PLLSAIDIVR_4                ((uint32_t)0x00010000)
+#define RCC_PLLSAIDIVR_8                ((uint32_t)0x00020000)
+#define RCC_PLLSAIDIVR_16               ((uint32_t)0x00030000)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCC PLLI2SP Clock Divider
+  * @{
+  */
+#if defined(STM32F446xx)
+#define RCC_PLLI2SP_DIV2                  ((uint32_t)0x00000002)
+#define RCC_PLLI2SP_DIV4                  ((uint32_t)0x00000004)
+#define RCC_PLLI2SP_DIV6                  ((uint32_t)0x00000006)
+#define RCC_PLLI2SP_DIV8                  ((uint32_t)0x00000008)
+#endif /* STM32F446xx */
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCC PLLSAIP Clock Divider
+  * @{
+  */
+#if defined(STM32F446xx)
+#define RCC_PLLSAIP_DIV2                  ((uint32_t)0x00000002)
+#define RCC_PLLSAIP_DIV4                  ((uint32_t)0x00000004)
+#define RCC_PLLSAIP_DIV6                  ((uint32_t)0x00000006)
+#define RCC_PLLSAIP_DIV8                  ((uint32_t)0x00000008)
+#endif /* STM32F446xx */
+/**
+  * @}
+  */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup RCCEx_SAI_BlockA_Clock_Source  RCC SAI BlockA Clock Source
+  * @{
+  */
+#define RCC_SAIACLKSOURCE_PLLSAI             ((uint32_t)0x00000000)
+#define RCC_SAIACLKSOURCE_PLLI2S             ((uint32_t)0x00100000)
+#define RCC_SAIACLKSOURCE_EXT                ((uint32_t)0x00200000)
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_SAI_BlockB_Clock_Source  RCC SAI BlockB Clock Source
+  * @{
+  */
+#define RCC_SAIBCLKSOURCE_PLLSAI             ((uint32_t)0x00000000)
+#define RCC_SAIBCLKSOURCE_PLLI2S             ((uint32_t)0x00400000)
+#define RCC_SAIBCLKSOURCE_EXT                ((uint32_t)0x00800000)
+/**
+  * @}
+  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F446xx)
+/** @defgroup RCCEx_SAI1_Clock_Source RCC SAI1 Clock Source
+  * @{
+  */
+#define RCC_SAI1CLKSOURCE_PLLSAI             ((uint32_t)0x00000000)
+#define RCC_SAI1CLKSOURCE_PLLI2S             ((uint32_t)RCC_DCKCFGR_SAI1SRC_0)
+#define RCC_SAI1CLKSOURCE_PLLR               ((uint32_t)RCC_DCKCFGR_SAI1SRC_1)
+#define RCC_SAI1CLKSOURCE_EXT                ((uint32_t)RCC_DCKCFGR_SAI1SRC)
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_SAI2_Clock_Source  RCC SAI2 Clock Source
+  * @{
+  */
+#define RCC_SAI2CLKSOURCE_PLLSAI             ((uint32_t)0x00000000)
+#define RCC_SAI2CLKSOURCE_PLLI2S             ((uint32_t)RCC_DCKCFGR_SAI2SRC_0)
+#define RCC_SAI2CLKSOURCE_PLLR               ((uint32_t)RCC_DCKCFGR_SAI2SRC_1)
+#define RCC_SAI2CLKSOURCE_PLLSRC             ((uint32_t)RCC_DCKCFGR_SAI2SRC)
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_I2SAPB1_Clock_Source  RCC I2S APB1 Clock Source
+  * @{
+  */
+#define RCC_I2SAPB1CLKSOURCE_PLLI2S          ((uint32_t)0x00000000)
+#define RCC_I2SAPB1CLKSOURCE_EXT             ((uint32_t)RCC_DCKCFGR_I2S1SRC_0)
+#define RCC_I2SAPB1CLKSOURCE_PLLR            ((uint32_t)RCC_DCKCFGR_I2S1SRC_1)
+#define RCC_I2SAPB1CLKSOURCE_PLLSRC          ((uint32_t)RCC_DCKCFGR_I2S1SRC)
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_I2SAPB2_Clock_Source  RCC I2S APB2 Clock Source
+  * @{
+  */
+#define RCC_I2SAPB2CLKSOURCE_PLLI2S          ((uint32_t)0x00000000)
+#define RCC_I2SAPB2CLKSOURCE_EXT             ((uint32_t)RCC_DCKCFGR_I2S2SRC_0)
+#define RCC_I2SAPB2CLKSOURCE_PLLR            ((uint32_t)RCC_DCKCFGR_I2S2SRC_1)
+#define RCC_I2SAPB2CLKSOURCE_PLLSRC          ((uint32_t)RCC_DCKCFGR_I2S2SRC)
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_FMPI2C1_Clock_Source  RCC FMPI2C1 Clock Source
+  * @{
+  */
+#define RCC_FMPI2C1CLKSOURCE_APB                ((uint32_t)0x00000000)
+#define RCC_FMPI2C1CLKSOURCE_SYSCLK             ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0)
+#define RCC_FMPI2C1CLKSOURCE_HSI                ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1)
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_CEC_Clock_Source  RCC CEC Clock Source
+  * @{
+  */
+#define RCC_CECCLKSOURCE_HSI                ((uint32_t)0x00000000)
+#define RCC_CECCLKSOURCE_LSE                ((uint32_t)RCC_DCKCFGR2_CECSEL)
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_CK48_Clock_Source  RCC CK48 Clock Source
+  * @{
+  */
+#define RCC_CK48CLKSOURCE_PLLQ              ((uint32_t)0x00000000)
+#define RCC_CK48CLKSOURCE_PLLSAIP           ((uint32_t)RCC_DCKCFGR2_CK48MSEL)
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_SDIO_Clock_Source  RCC SDIO Clock Source
+  * @{
+  */
+#define RCC_SDIOCLKSOURCE_CK48              ((uint32_t)0x00000000)
+#define RCC_SDIOCLKSOURCE_SYSCLK            ((uint32_t)RCC_DCKCFGR2_SDIOSEL)
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_SPDIFRX_Clock_Source   RCC SPDIFRX Clock Source
+  * @{
+  */
+#define RCC_SPDIFRXCLKSOURCE_PLLR             ((uint32_t)0x00000000)
+#define RCC_SPDIFRXCLKSOURCE_PLLI2SP          ((uint32_t)RCC_DCKCFGR2_SPDIFRXSEL)
+/**
+  * @}
+  */
+
+#endif /* STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+/** @defgroup RCCEx_TIM_PRescaler_Selection  RCC TIM PRescaler Selection
+  * @{
+  */
+#define RCC_TIMPRES_DESACTIVATED        ((uint8_t)0x00)
+#define RCC_TIMPRES_ACTIVATED           ((uint8_t)0x01)
+/**
+  * @}
+  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F411xE) || defined(STM32F446xx)
+/** @defgroup RCCEx_LSE_Dual_Mode_Selection  RCC LSE Dual Mode Selection
+  * @{
+  */
+#define RCC_LSE_LOWPOWER_MODE           ((uint8_t)0x00)
+#define RCC_LSE_HIGHDRIVE_MODE          ((uint8_t)0x01)
+/**
+  * @}
+  */
+#endif /* STM32F411xE || STM32F446xx */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+  * @{
+  */
+/*------------------------------- STM32F42xxx/STM32F43xxx ----------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/** @brief  Enables or disables the AHB1 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_GPIOI_CLK_ENABLE()    do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+#define __HAL_RCC_GPIOF_CLK_ENABLE()    do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE()    do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+#define __HAL_RCC_GPIOJ_CLK_ENABLE()    do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+#define __HAL_RCC_GPIOK_CLK_ENABLE()    do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+#define __HAL_RCC_DMA2D_CLK_ENABLE()    do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+#define __HAL_RCC_ETHMAC_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+                                         UNUSED(tmpreg); \
+                                         } while(0)
+#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
+                                         __IO uint32_t tmpreg; \
+                                         SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+                                         /* Delay after an RCC peripheral clock enabling */ \
+                                         tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+                                         UNUSED(tmpreg); \
+                                         } while(0)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE()   do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+
+#define __HAL_RCC_GPIOF_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_GPIOI_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __HAL_RCC_GPIOJ_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN))
+#define __HAL_RCC_GPIOK_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN))
+#define __HAL_RCC_DMA2D_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN))
+#define __HAL_RCC_ETHMAC_CLK_DISABLE()          (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __HAL_RCC_ETHMACTX_CLK_DISABLE()        (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __HAL_RCC_ETHMACRX_CLK_DISABLE()        (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __HAL_RCC_ETHMACPTP_CLK_DISABLE()       (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE()      (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+
+/**
+  * @brief  Enable ETHERNET clock.
+  */
+#define __HAL_RCC_ETH_CLK_ENABLE() do {                                     \
+                                        __HAL_RCC_ETHMAC_CLK_ENABLE();      \
+                                        __HAL_RCC_ETHMACTX_CLK_ENABLE();    \
+                                        __HAL_RCC_ETHMACRX_CLK_ENABLE();    \
+                                      } while(0)
+/**
+  * @brief  Disable ETHERNET clock.
+  */
+#define __HAL_RCC_ETH_CLK_DISABLE()  do {                                      \
+                                          __HAL_RCC_ETHMACTX_CLK_DISABLE();    \
+                                          __HAL_RCC_ETHMACRX_CLK_DISABLE();    \
+                                          __HAL_RCC_ETHMAC_CLK_DISABLE();      \
+                                        } while(0)
+
+/** @brief  Enable or disable the AHB2 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+
+#define __HAL_RCC_DCMI_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE()  (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx)
+#define __HAL_RCC_CRYP_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_HASH_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_CRYP_CLK_DISABLE()  (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HAL_RCC_HASH_CLK_DISABLE()  (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F437xx || STM32F439xx */
+
+/** @brief  Enables or disables the AHB3 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_FMC_CLK_ENABLE()    do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_FMC_CLK_DISABLE()  (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+
+/** @brief  Enable or disable the Low Speed APB (APB1) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_TIM6_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_UART4_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_UART5_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE()    do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_UART7_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_UART8_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM6_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_DAC_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+#define __HAL_RCC_UART7_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN))
+#define __HAL_RCC_UART8_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN))
+
+/** @brief  Enable or disable the High Speed APB (APB2) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_TIM8_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_ADC2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_ADC3_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_SPI5_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_SPI6_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_SAI1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN))
+#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx)
+#define __HAL_RCC_LTDC_CLK_ENABLE()  (RCC->APB2ENR |= (RCC_APB2ENR_LTDCEN))
+
+#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN))
+#endif /* STM32F429xx || STM32F439xx */
+
+/** @brief  Force or release AHB1 peripheral reset.
+  */
+#define __HAL_RCC_GPIOF_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOJ_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST))
+#define __HAL_RCC_DMA2D_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST))
+
+#define __HAL_RCC_GPIOF_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOJ_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST))
+#define __HAL_RCC_DMA2D_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST))
+
+/** @brief  Force or release AHB2 peripheral reset.
+  */
+#define __HAL_RCC_DCMI_FORCE_RESET()   (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx)
+#define __HAL_RCC_CRYP_FORCE_RESET()   (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_FORCE_RESET()   (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+
+#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+#endif /* STM32F437xx || STM32F439xx */
+
+/** @brief  Force or release AHB3 peripheral reset
+  */
+#define __HAL_RCC_FMC_FORCE_RESET()    (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_FMC_RELEASE_RESET()  (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+
+/** @brief  Force or release APB1 peripheral reset.
+  */
+#define __HAL_RCC_TIM6_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_FORCE_RESET()   (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST))
+
+#define __HAL_RCC_TIM6_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST))
+
+/** @brief  Force or release APB2 peripheral reset.
+  */
+#define __HAL_RCC_TIM8_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SPI5_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx)
+#define __HAL_RCC_LTDC_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST))
+#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST))
+#endif /* STM32F429xx|| STM32F439xx */
+
+/** @brief  Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE()     (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE()   (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE()   (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE()  (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE()  (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN))
+#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN))
+#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN))
+
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE()    (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE()  (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE()  (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN))
+#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN))
+
+/** @brief  Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE()  (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx)
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE()  (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE()  (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F437xx || STM32F439xx */
+
+/** @brief  Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE()  (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+
+/** @brief  Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE()  (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE()     (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN))
+
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE()    (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN))
+
+/** @brief  Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx)
+#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN))
+
+#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN))
+#endif /* STM32F429xx || STM32F439xx */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*---------------------------------------------------------------------------------------------*/
+
+/*----------------------------------- STM32F40xxx/STM32F41xxx----------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+/** @brief  Enables or disables the AHB1 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_GPIOI_CLK_ENABLE()   do { \
+                                       __IO uint32_t tmpreg; \
+                                       SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+                                       /* Delay after an RCC peripheral clock enabling */ \
+                                       tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+                                       UNUSED(tmpreg); \
+                                       } while(0)
+#define __HAL_RCC_GPIOF_CLK_ENABLE()   do { \
+                                       __IO uint32_t tmpreg; \
+                                       SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+                                       /* Delay after an RCC peripheral clock enabling */ \
+                                       tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+                                       UNUSED(tmpreg); \
+                                       } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE()   do { \
+                                       __IO uint32_t tmpreg; \
+                                       SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+                                       /* Delay after an RCC peripheral clock enabling */ \
+                                       tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+                                       UNUSED(tmpreg); \
+                                       } while(0)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE()   do { \
+                                       __IO uint32_t tmpreg; \
+                                       SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+                                       /* Delay after an RCC peripheral clock enabling */ \
+                                       tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+                                       UNUSED(tmpreg); \
+                                       } while(0)
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE()   do { \
+                                       __IO uint32_t tmpreg; \
+                                       SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+                                       /* Delay after an RCC peripheral clock enabling */ \
+                                       tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+                                       UNUSED(tmpreg); \
+                                       } while(0)
+
+#define __HAL_RCC_GPIOF_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_GPIOI_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE()      (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+/**
+  * @brief  Enable ETHERNET clock.
+  */
+#define __HAL_RCC_ETHMAC_CLK_ENABLE()  do { \
+                                       __IO uint32_t tmpreg; \
+                                       SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+                                       /* Delay after an RCC peripheral clock enabling */ \
+                                       tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+                                       UNUSED(tmpreg); \
+                                       } while(0)
+#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
+                                        __IO uint32_t tmpreg; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+                                        UNUSED(tmpreg); \
+                                        } while(0)
+#define __HAL_RCC_ETH_CLK_ENABLE()      do {                            \
+                                        __HAL_RCC_ETHMAC_CLK_ENABLE();      \
+                                        __HAL_RCC_ETHMACTX_CLK_ENABLE();    \
+                                        __HAL_RCC_ETHMACRX_CLK_ENABLE();    \
+                                        } while(0)
+
+/**
+  * @brief  Disable ETHERNET clock.
+  */
+#define __HAL_RCC_ETHMAC_CLK_DISABLE()    (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __HAL_RCC_ETHMACTX_CLK_DISABLE()  (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __HAL_RCC_ETHMACRX_CLK_DISABLE()  (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __HAL_RCC_ETH_CLK_DISABLE()       do {                             \
+                                      __HAL_RCC_ETHMACTX_CLK_DISABLE();    \
+                                      __HAL_RCC_ETHMACRX_CLK_DISABLE();    \
+                                      __HAL_RCC_ETHMAC_CLK_DISABLE();      \
+                                     } while(0)
+#endif /* STM32F407xx || STM32F417xx */
+
+/** @brief  Enable or disable the AHB2 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE()  (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_HASH_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_CRYP_CLK_DISABLE()  (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HAL_RCC_HASH_CLK_DISABLE()  (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F415xx || STM32F417xx */
+
+/** @brief  Enables or disables the AHB3 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_FSMC_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN))
+
+/** @brief  Enable or disable the Low Speed APB (APB1) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_TIM6_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_UART4_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_UART5_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE()    do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM6_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_DAC_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+
+/** @brief  Enable or disable the High Speed APB (APB2) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_TIM8_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_ADC2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_ADC3_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+
+/** @brief  Force or release AHB1 peripheral reset.
+  */
+#define __HAL_RCC_GPIOF_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+
+#define __HAL_RCC_GPIOF_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+
+/** @brief  Force or release AHB2 peripheral reset.
+  */
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_FORCE_RESET()   (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_FORCE_RESET()   (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_FORCE_RESET()   (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+
+#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+
+#endif /* STM32F415xx || STM32F417xx */
+
+/** @brief  Force or release AHB3 peripheral reset
+  */
+#define __HAL_RCC_FSMC_FORCE_RESET()   (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST))
+#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST))
+
+/** @brief  Force or release APB1 peripheral reset.
+  */
+#define __HAL_RCC_TIM6_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_FORCE_RESET()   (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __HAL_RCC_TIM6_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+
+/** @brief  Force or release APB2 peripheral reset.
+  */
+#define __HAL_RCC_TIM8_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+
+/** @brief  Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE()     (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE()   (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE()   (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE()  (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE()  (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE()    (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE()  (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE()  (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+
+/** @brief  Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE()  (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE()  (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE()  (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F415xx || STM32F417xx */
+
+/** @brief  Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE()  (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN))
+#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN))
+
+/** @brief  Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE()  (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE()     (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE()    (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+
+/** @brief  Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*---------------------------------------------------------------------------------------------*/
+
+/*------------------------------------------ STM32F411xx --------------------------------------*/
+#if defined(STM32F411xE)
+/** @brief  Enable or disable the High Speed APB (APB2) peripheral clock.
+  */
+#define __HAL_RCC_SPI5_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+
+/** @brief  Force or release APB2 peripheral reset.
+  */
+#define __HAL_RCC_SPI5_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+
+/** @brief  Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+  */
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+
+#endif /* STM32F411xE */
+/*---------------------------------------------------------------------------------------------*/
+
+/*----------------------------------------- STM32F446xx ---------------------------------------*/
+#if defined(STM32F446xx)
+/** @brief  Enables or disables the AHB1 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_GPIOF_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_GPIOF_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE()      (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+
+/** @brief  Enable or disable the AHB2 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_DCMI_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE()  (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+
+/** @brief  Enables or disables the AHB3 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_FMC_CLK_ENABLE()    do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_QSPI_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_FMC_CLK_DISABLE()    (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+#define __HAL_RCC_QSPI_CLK_DISABLE()   (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+
+/** @brief  Enable or disable the Low Speed APB (APB1) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_TIM6_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_UART4_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_UART5_CLK_ENABLE()  do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_CEC_CLK_ENABLE()    do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE()    do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM6_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_SPDIFRX_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN))
+#define __HAL_RCC_USART3_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_CEC_CLK_DISABLE()     (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#define __HAL_RCC_DAC_CLK_DISABLE()     (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+
+/** @brief  Enable or disable the High Speed APB (APB2) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_TIM8_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_ADC2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_ADC3_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_SAI1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+#define __HAL_RCC_SAI2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg; \
+                                      SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+                                      /* Delay after an RCC peripheral clock enabling */ \
+                                      tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+                                      UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN))
+
+/** @brief  Force or release AHB1 peripheral reset.
+  */
+#define __HAL_RCC_GPIOF_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+
+#define __HAL_RCC_GPIOF_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+
+/** @brief  Force or release AHB2 peripheral reset.
+  */
+#define __HAL_RCC_DCMI_FORCE_RESET()   (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+
+/** @brief  Force or release AHB3 peripheral reset
+  */
+#define __HAL_RCC_FMC_FORCE_RESET()    (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_FORCE_RESET()   (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+
+#define __HAL_RCC_FMC_RELEASE_RESET()    (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_RELEASE_RESET()   (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+
+/** @brief  Force or release APB1 peripheral reset.
+  */
+#define __HAL_RCC_TIM6_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_SPDIFRX_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_USART3_FORCE_RESET()   (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_FMPI2C1_FORCE_RESET()  (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_CAN1_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+#define __HAL_RCC_DAC_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __HAL_RCC_TIM6_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_SPDIFRX_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#define __HAL_RCC_DAC_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+
+/** @brief  Force or release APB2 peripheral reset.
+  */
+#define __HAL_RCC_TIM8_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SAI1_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST))
+
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST))
+
+/** @brief  Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE()  (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+/** @brief  Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE()  (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+
+/** @brief  Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE()   (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE()  (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+
+#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE()   (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE()  (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+
+/** @brief  Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE()  (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE()     (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE()     (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE()    (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE()    (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+
+/** @brief  Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN))
+
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN))
+
+#endif /* STM32F446xx */
+/*------------------------------------------------------------------------------------------------------------*/
+
+/*------------------------------------------------- PLL Configuration ----------------------------------------*/
+#if defined(STM32F446xx)
+/** @brief  Macro to configure the main PLL clock source, multiplication and division factors.
+  * @note   This function must be used only when the main PLL is disabled.
+  * @param  __RCC_PLLSource__: specifies the PLL entry clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+  *            @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+  * @note   This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+  * @param  __PLLM__: specifies the division factor for PLL VCO input clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+  * @note   You have to set the PLLM parameter correctly to ensure that the VCO input
+  *         frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+  *         of 2 MHz to limit PLL jitter.
+  * @param  __PLLN__: specifies the multiplication factor for PLL VCO output clock
+  *         This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+  * @note   You have to set the PLLN parameter correctly to ensure that the VCO
+  *         output frequency is between 192 and 432 MHz.
+  *
+  * @param  __PLLP__: specifies the division factor for main system clock (SYSCLK)
+  *         This parameter must be a number in the range {2, 4, 6, or 8}.
+  *
+  * @param  __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+  * @note   If the USB OTG FS is used in your application, you have to set the
+  *         PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+  *         the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
+  *         correctly.
+  *
+  * @param  __PLLR__: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks.
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+  * @note   This parameter is only available in STM32F446xx devices.
+  *
+  */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__)  \
+                            (RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__)                   | \
+                            ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN))                      | \
+                            ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP))          | \
+                            ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ))                      | \
+                            ((__PLLR__) << POSITION_VAL(RCC_PLLCFGR_PLLR))))
+#else
+/** @brief  Macro to configure the main PLL clock source, multiplication and division factors.
+  * @note   This function must be used only when the main PLL is disabled.
+  * @param  __RCC_PLLSource__: specifies the PLL entry clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+  *            @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+  * @note   This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+  * @param  __PLLM__: specifies the division factor for PLL VCO input clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+  * @note   You have to set the PLLM parameter correctly to ensure that the VCO input
+  *         frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+  *         of 2 MHz to limit PLL jitter.
+  * @param  __PLLN__: specifies the multiplication factor for PLL VCO output clock
+  *         This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+  * @note   You have to set the PLLN parameter correctly to ensure that the VCO
+  *         output frequency is between 192 and 432 MHz.
+  *
+  * @param  __PLLP__: specifies the division factor for main system clock (SYSCLK)
+  *         This parameter must be a number in the range {2, 4, 6, or 8}.
+  *
+  * @param  __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+  * @note   If the USB OTG FS is used in your application, you have to set the
+  *         PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+  *         the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
+  *         correctly.
+  *
+  */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__)     \
+                            (RCC->PLLCFGR = (0x20000000 | (__RCC_PLLSource__) | (__PLLM__)| \
+                            ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN))                | \
+                            ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP))    | \
+                            ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ))))
+ #endif /* STM32F446xx */
+/*-------------------------------------------------------------------------------------------------------*/
+
+/*------------------------------------------- PLLI2S Configuration --------------------------------------*/
+#if defined(STM32F446xx)
+/** @brief  Macro to configure the PLLI2S clock multiplication and division factors .
+  * @note   This macro must be used only when the PLLI2S is disabled.
+  * @note   PLLI2S clock source is common with the main PLL (configured in
+  *         HAL_RCC_ClockConfig() API).
+  * @param  __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+  * @note   You have to set the PLLI2SM parameter correctly to ensure that the VCO input
+  *         frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+  *         of 1 MHz to limit PLLI2S jitter.
+  * @note   The PLLI2SM parameter is only used with STM32F411xE and STM32F446xx Devices
+  *
+  * @param  __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+  *         This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+  * @note   You have to set the PLLI2SN parameter correctly to ensure that the VCO
+  *         output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+  *
+  * @param  __PLLI2SP__: specifies division factor for SPDIFRX Clock.
+  *         This parameter must be a number in the range {2, 4, 6, or 8}.
+  * @note   the PLLI2SP parameter is only available with STM32F446xx Devices
+  *
+  * @param  __PLLI2SR__: specifies the division factor for I2S clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+  * @note   You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+  *         on the I2S clock frequency.
+  *
+  * @param  __PLLI2SQ__: specifies the division factor for SAI clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+  * @note   the PLLI2SQ parameter is only available with STM32F427/437/429x/439xx Devices
+  *
+  */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \
+                               (RCC->PLLI2SCFGR = ((__PLLI2SM__)                                                       |\
+                                                   ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN))             |\
+                                                   ((((__PLLI2SP__) >> 1) -1) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) |\
+                                                   ((__PLLI2SQ__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ))             |\
+                                                   ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#else
+/** @brief  Macro to configure the PLLI2S clock multiplication and division factors .
+  * @note   This macro must be used only when the PLLI2S is disabled.
+  * @note   PLLI2S clock source is common with the main PLL (configured in
+  *         HAL_RCC_ClockConfig() API).
+  * @param  __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+  *         This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+  * @note   You have to set the PLLI2SN parameter correctly to ensure that the VCO
+  *         output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+  * @param  __PLLI2SR__: specifies the division factor for I2S clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+  * @note   You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+  *         on the I2S clock frequency.
+  *
+  */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__)                                                     \
+                               (RCC->PLLI2SCFGR = (((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN))  | \
+                               ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#endif /* STM32F446xx */
+
+#if defined(STM32F411xE)
+
+/** @brief  Macro to configure the PLLI2S clock multiplication and division factors .
+  * @note   This macro must be used only when the PLLI2S is disabled.
+  * @note   This macro must be used only when the PLLI2S is disabled.
+  * @note   PLLI2S clock source is common with the main PLL (configured in
+  *         HAL_RCC_ClockConfig() API).
+  * @param  __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+  * @note   The PLLI2SM parameter is only used with STM32F411xE Devices
+  * @note   You have to set the PLLI2SM parameter correctly to ensure that the VCO input
+  *         frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+  *         of 2 MHz to limit PLLI2S jitter.
+  * @param  __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+  *         This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+  * @note   You have to set the PLLI2SN parameter correctly to ensure that the VCO
+  *         output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+  * @param  __PLLI2SR__: specifies the division factor for I2S clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+  * @note   You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+  *         on the I2S clock frequency.
+  */
+#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SM__)                                                       |\
+                                                                                                  ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN))             |\
+                                                                                                  ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#endif /* STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @brief  Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors.
+  * @note   This macro must be used only when the PLLI2S is disabled.
+  * @note   PLLI2S clock source is common with the main PLL (configured in
+  *         HAL_RCC_ClockConfig() API)
+  * @param  __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock.
+  *         This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+  * @note   You have to set the PLLI2SN parameter correctly to ensure that the VCO
+  *         output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+  * @param  __PLLI2SQ__: specifies the division factor for SAI1 clock.
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+  * @note   the PLLI2SQ parameter is only available with STM32F427xx/437xx/429xx/439xx Devices
+  *         and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro
+  * @param  __PLLI2SR__: specifies the division factor for I2S clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+  * @note   You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+  *         on the I2S clock frequency.
+  */
+#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6)  |\
+                                                                                                 ((__PLLI2SQ__) << 24) |\
+                                                                                                 ((__PLLI2SR__) << 28))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/*----------------------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------------- PLLSAI Configuration ---------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/** @brief Macros to Enable or Disable the PLLISAI.
+  * @note  The PLLSAI is only available with STM32F429x/439x Devices.
+  * @note  The PLLSAI is disabled by hardware when entering STOP and STANDBY modes.
+  */
+#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = ENABLE)
+#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = DISABLE)
+
+#if defined(STM32F446xx)
+/** @brief  Macro to configure the PLLSAI clock multiplication and division factors.
+  *
+  * @param  __PLLSAIM__: specifies the division factor for PLLSAI VCO input clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+  * @note   You have to set the PLLSAIM parameter correctly to ensure that the VCO input
+  *         frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+  *         of 1 MHz to limit PLLI2S jitter.
+  * @note   The PLLSAIM parameter is only used with STM32F446xx Devices
+  *
+  * @param  __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+  *         This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+  * @note   You have to set the PLLSAIN parameter correctly to ensure that the VCO
+  *         output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+  *
+  * @param  __PLLSAIP__: specifies division factor for OTG FS, SDIO and RNG clocks.
+  *         This parameter must be a number in the range {2, 4, 6, or 8}.
+  * @note   the PLLSAIP parameter is only available with STM32F446xx Devices
+  *
+  * @param  __PLLSAIQ__: specifies the division factor for SAI clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+  *
+  * @param  __PLLSAIR__: specifies the division factor for LTDC clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+  * @note   the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices
+  */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIM__, __PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__)     \
+                               (RCC->PLLSAICFGR = ((__PLLSAIM__)                                   | \
+                               ((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN))             | \
+                               ((((__PLLSAIP__) >> 1) -1) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) | \
+                               ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ))))
+#endif /* STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @brief  Macro to configure the PLLSAI clock multiplication and division factors.
+  *
+  * @param  __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+  *         This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+  * @note   You have to set the PLLSAIN parameter correctly to ensure that the VCO
+  *         output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+  *
+  * @param  __PLLSAIQ__: specifies the division factor for SAI clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+  *
+  * @param  __PLLSAIR__: specifies the division factor for LTDC clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+  * @note   the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices
+  */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__)                                        \
+                               (RCC->PLLSAICFGR = (((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN))  | \
+                               ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ))                      | \
+                               ((__PLLSAIR__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR))))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/*----------------------------------------------------------------------------------------------------------------------*/
+
+/*----------------------------------------- PLLSAI/PLLI2S Dividers Configuration ---------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)  || defined(STM32F446xx)
+/** @brief  Macro to configure the SAI clock Divider coming from PLLI2S.
+  * @note   This function must be called before enabling the PLLI2S.
+  * @param  __PLLI2SDivQ__: specifies the PLLI2S division factor for SAI1 clock .
+  *          This parameter must be a number between 1 and 32.
+  *          SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__
+  */
+#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1))
+
+/** @brief  Macro to configure the SAI clock Divider coming from PLLSAI.
+  * @note   This function must be called before enabling the PLLSAI.
+  * @param  __PLLSAIDivQ__: specifies the PLLSAI division factor for SAI1 clock .
+  *         This parameter must be a number between Min_Data = 1 and Max_Data = 32.
+  *         SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__
+  */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @brief  Macro to configure the LTDC clock Divider coming from PLLSAI.
+  *
+  * @note   The LTDC peripheral is only available with STM32F427/437/429/439xx Devices.
+  * @note   This function must be called before enabling the PLLSAI.
+  * @param  __PLLSAIDivR__: specifies the PLLSAI division factor for LTDC clock .
+  *          This parameter must be a number between Min_Data = 2 and Max_Data = 16.
+  *          LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__
+  */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__)))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------------------------------------*/
+
+/*-------------------------------------------------- Peripheral Clock selection -----------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/** @brief  Macro to configure the I2S clock source (I2SCLK).
+  * @note   This function must be called before enabling the I2S APB clock.
+  * @param  __SOURCE__: specifies the I2S clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source.
+  *            @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+  *                                       used as I2S clock source.
+  */
+#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_CFGR_I2SSRC_BB = (__SOURCE__))
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/** @brief  Macro to configure SAI1BlockA clock source selection.
+  * @note   The SAI peripheral is only available with STM32F427/437/429/439xx Devices.
+  * @note   This function must be called before enabling PLLSAI, PLLI2S and
+  *         the SAI clock.
+  * @param  __SOURCE__: specifies the SAI Block A clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+  *                                           as SAI1 Block A clock.
+  *            @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+  *                                           as SAI1 Block A clock.
+  *            @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
+  *                                        used as SAI1 Block A clock.
+  */
+#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__)))
+
+/** @brief  Macro to configure SAI1BlockB clock source selection.
+  * @note   The SAI peripheral is only available with STM32F427/437/429/439xx Devices.
+  * @note   This function must be called before enabling PLLSAI, PLLI2S and
+  *         the SAI clock.
+  * @param  __SOURCE__: specifies the SAI Block B clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+  *                                           as SAI1 Block B clock.
+  *            @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+  *                                           as SAI1 Block B clock.
+  *            @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
+  *                                        used as SAI1 Block B clock.
+  */
+#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__)))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F446xx)
+/** @brief  Macro to configure SAI1 clock source selection.
+  * @note   This configuration is only available with STM32F446xx Devices.
+  * @note   This function must be called before enabling PLL, PLLSAI, PLLI2S and
+  *         the SAI clock.
+  * @param  __SOURCE__: specifies the SAI1 clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock.
+  *            @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock.
+  *            @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+  *            @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+  */
+#define __HAL_RCC_SAI1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC, (__SOURCE__)))
+
+/** @brief  Macro to Get SAI1 clock source selection.
+  * @note   This configuration is only available with STM32F446xx Devices.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock.
+  *            @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock.
+  *            @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+  *            @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+  */
+#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC))
+
+/** @brief  Macro to configure SAI2 clock source selection.
+  * @note   This configuration is only available with STM32F446xx Devices.
+  * @note   This function must be called before enabling PLL, PLLSAI, PLLI2S and
+  *         the SAI clock.
+  * @param  __SOURCE__: specifies the SAI2 clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock.
+  *            @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock.
+  *            @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock.
+  *            @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock.
+  */
+#define __HAL_RCC_SAI2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC, (__SOURCE__)))
+
+/** @brief  Macro to Get SAI2 clock source selection.
+  * @note   This configuration is only available with STM32F446xx Devices.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock.
+  *            @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock.
+  *            @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock.
+  *            @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock.
+  */
+#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC))
+
+/** @brief  Macro to configure I2S APB1 clock source selection.
+  * @note   This configuration is only available with STM32F446xx Devices.
+  * @note   This function must be called before enabling PLL, PLLI2S and the I2S clock.
+  * @param  __SOURCE__: specifies the I2S APB1 clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+  *            @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+  *            @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+  *            @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+  */
+#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__)))
+
+/** @brief  Macro to Get I2S APB1 clock source selection.
+  * @note   This configuration is only available with STM32F446xx Devices.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+  *            @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+  *            @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+  *            @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+  */
+#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC))
+
+/** @brief  Macro to configure I2S APB2 clock source selection.
+  * @note   This configuration is only available with STM32F446xx Devices.
+  * @note   This function must be called before enabling PLL, PLLI2S and the I2S clock.
+  * @param  __SOURCE__: specifies the SAI Block A clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+  *            @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+  *            @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+  *            @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+  */
+#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__)))
+
+/** @brief  Macro to Get I2S APB2 clock source selection.
+  * @note   This configuration is only available with STM32F446xx Devices.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+  *            @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+  *            @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+  *            @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+  */
+#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC))
+
+/** @brief  Macro to configure the CEC clock.
+  * @param  __SOURCE__: specifies the CEC clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+  *            @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+  */
+#define __HAL_RCC_CEC_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief  Macro to Get the CEC clock.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_CECCLKSOURCE_HSI488: HSI selected as CEC clock
+  *            @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+  */
+#define __HAL_RCC_GET_CEC_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL))
+
+/** @brief  Macro to configure the FMPI2C1 clock.
+  * @param  __SOURCE__: specifies the FMPI2C1 clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as CEC clock
+  *            @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as CEC clock
+  *            @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as CEC clock
+  */
+#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__)))
+
+/** @brief  Macro to Get the FMPI2C1 clock.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as CEC clock
+  *            @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as CEC clock
+  *            @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as CEC clock
+  */
+#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL))
+
+/** @brief  Macro to configure the CLK48 clock.
+  * @param  __SOURCE__: specifies the CK48 clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_CK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CK48 clock.
+  *            @arg RCC_CK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CK48 clock.
+  */
+#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief  Macro to Get the CLK48 clock.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_CK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CK48 clock.
+  *            @arg RCC_CK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CK48 clock.
+  */
+#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL))
+
+/** @brief  Macro to configure the SDIO clock.
+  * @param  __SOURCE__: specifies the SDIO clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_SDIOCLKSOURCE_CK48: CK48 output used as SDIO clock.
+  *            @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+  */
+#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief  Macro to Get the SDIO clock.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_SDIOCLKSOURCE_CK48: CK48 output used as SDIO clock.
+  *            @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+  */
+#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL))
+
+/** @brief  Macro to configure the SPDIFRX clock.
+  * @param  __SOURCE__: specifies the SPDIFRX clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock.
+  *            @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock.
+  */
+#define __HAL_RCC_SPDIFRX_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief  Macro to Get the SPDIFRX clock.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock.
+  *            @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock.
+  */
+#define __HAL_RCC_GET_SPDIFRX_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL))
+#endif /* STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+
+/** @brief  Macro to configure the Timers clocks prescalers
+  * @note   This feature is only available with STM32F429x/439x Devices.
+  * @param  __PRESC__ : specifies the Timers clocks prescalers selection
+  *         This parameter can be one of the following values:
+  *            @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is
+  *                 equal to HPRE if PPREx is corresponding to division by 1 or 2,
+  *                 else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to
+  *                 division by 4 or more.
+  *            @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is
+  *                 equal to HPRE if PPREx is corresponding to division by 1, 2 or 4,
+  *                 else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding
+  *                 to division by 8 or more.
+  */
+#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) RCC_DCKCFGR_TIMPRE_BB = (__PRESC__))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+/*-------------------------------------------------------------------------------------------------------------------*/
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/** @brief Enable PLLSAI_RDY interrupt.
+  */
+#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Disable PLLSAI_RDY interrupt.
+  */
+#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Clear the PLLSAI RDY interrupt pending bits.
+  */
+#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF))
+
+/** @brief Check the PLLSAI RDY interrupt has occurred or not.
+  * @retval The new state (TRUE or FALSE).
+  */
+#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief  Check PLLSAI RDY flag is set or not.
+  * @retval The new state (TRUE or FALSE).
+  */
+#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+  *  @{
+  */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+  *  @{
+  */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit);
+
+#if defined(STM32F446xx)
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+#endif /* STM32F446xx */
+
+#if defined(STM32F411xE) || defined(STM32F446xx)
+void HAL_RCCEx_SelectLSEMode(uint8_t Mode);
+#endif /* STM32F411xE || STM32F446xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Constants RCCEx Private Constants
+  * @{
+  */
+
+/** @defgroup RCCEx_BitAddress_AliasRegion RCC BitAddress AliasRegion
+  * @brief RCC registers bit address in the alias region
+  * @{
+  */
+/* --- CR Register ---*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/* Alias word address of PLLSAION bit */
+#define RCC_PLLSAION_BIT_NUMBER        0x1C
+#define RCC_CR_PLLSAION_BB            (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLSAION_BIT_NUMBER * 4))
+
+/* --- DCKCFGR Register ---*/
+/* Alias word address of TIMPRE bit */
+#define RCC_DCKCFGR_OFFSET            (RCC_OFFSET + 0x8C)
+#define RCC_TIMPRE_BIT_NUMBER          0x18
+#define RCC_DCKCFGR_TIMPRE_BB         (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32) + (RCC_TIMPRE_BIT_NUMBER * 4))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#define PLL_TIMEOUT_VALUE          ((uint32_t)100)  /* 100 ms */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCCEx_Private_Macros RCCEx Private Macros
+  * @{
+  */
+/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters
+  * @{
+  */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000002F))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000003))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F446xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x000007FF))
+#endif /* STM32F446xx */
+
+#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F446xx)
+#define IS_RCC_PLLI2SQ_VALUE(VALUE)     ((2 <= (VALUE)) && ((VALUE) <= 15))
+
+#define IS_RCC_PLLSAIN_VALUE(VALUE)     ((49 <= (VALUE)) && ((VALUE) <= 432))
+
+#define IS_RCC_PLLSAIQ_VALUE(VALUE)     ((2 <= (VALUE)) && ((VALUE) <= 15))
+
+#define IS_RCC_PLLSAIR_VALUE(VALUE)     ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+
+#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+
+#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2)  ||\
+                                         ((VALUE) == RCC_PLLSAIDIVR_4)  ||\
+                                         ((VALUE) == RCC_PLLSAIDIVR_8)  ||\
+                                         ((VALUE) == RCC_PLLSAIDIVR_16))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F446xx) || defined(STM32F411xE)
+#define IS_RCC_PLLI2SM_VALUE(VALUE)     ((VALUE) <= 63)
+
+#define IS_RCC_LSE_MODE(MODE)           (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
+                                         ((MODE) == RCC_LSE_HIGHDRIVE_MODE))
+#endif /* STM32F446xx || STM32F411xE */
+
+#if defined(STM32F446xx)
+#define IS_RCC_PLLR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+#define IS_RCC_PLLI2SP_VALUE(VALUE)       (((VALUE) == RCC_PLLI2SP_DIV2) ||\
+                                           ((VALUE) == RCC_PLLI2SP_DIV4) ||\
+                                           ((VALUE) == RCC_PLLI2SP_DIV6) ||\
+                                           ((VALUE) == RCC_PLLI2SP_DIV8))
+
+#define IS_RCC_PLLSAIM_VALUE(VALUE)       ((VALUE) <= 63)
+
+#define IS_RCC_PLLSAIP_VALUE(VALUE)       (((VALUE) == RCC_PLLSAIP_DIV2) ||\
+                                           ((VALUE) == RCC_PLLSAIP_DIV4) ||\
+                                           ((VALUE) == RCC_PLLSAIP_DIV6) ||\
+                                           ((VALUE) == RCC_PLLSAIP_DIV8))
+
+#define IS_RCC_SAI1CLKSOURCE(SOURCE)      (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) ||\
+                                           ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) ||\
+                                           ((SOURCE) == RCC_SAI1CLKSOURCE_PLLR)   ||\
+                                           ((SOURCE) == RCC_SAI1CLKSOURCE_EXT))
+
+#define IS_RCC_SAI2CLKSOURCE(SOURCE)      (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) ||\
+                                           ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) ||\
+                                           ((SOURCE) == RCC_SAI2CLKSOURCE_PLLR)   ||\
+                                           ((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC))
+
+#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE)   (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\
+                                           ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT)    ||\
+                                           ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR)   ||\
+                                           ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC))
+
+ #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE)  (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\
+                                           ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT)    ||\
+                                           ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR)   ||\
+                                           ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC))
+
+#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE)   (((SOURCE) == RCC_FMPI2C1CLKSOURCE_APB)    ||\
+                                           ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\
+                                           ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI))
+
+#define IS_RCC_CECCLKSOURCE(SOURCE)       (((SOURCE) == RCC_CECCLKSOURCE_HSI)   ||\
+                                           ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+
+#define IS_RCC_CK48CLKSOURCE(SOURCE)      (((SOURCE) == RCC_CK48CLKSOURCE_PLLQ) ||\
+                                           ((SOURCE) == RCC_CK48CLKSOURCE_PLLSAIP))
+
+#define IS_RCC_SDIOCLKSOURCE(SOURCE)      (((SOURCE) == RCC_SDIOCLKSOURCE_CK48) ||\
+                                           ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK))
+
+#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE)     (((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLR) ||\
+                                           ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLI2SP))
+#endif /* STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h
new file mode 100644
index 0000000..ecce334
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h
@@ -0,0 +1,364 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rng.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of RNG HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RNG_H
+#define __STM32F4xx_HAL_RNG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RNG RNG
+  * @brief RNG HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Types RNG Exported Types
+  * @{
+  */
+
+/** @defgroup RNG_Exported_Types_Group1 RNG State Structure definition
+  * @{
+  */
+typedef enum
+{
+  HAL_RNG_STATE_RESET     = 0x00,  /*!< RNG not yet initialized or disabled */
+  HAL_RNG_STATE_READY     = 0x01,  /*!< RNG initialized and ready for use   */
+  HAL_RNG_STATE_BUSY      = 0x02,  /*!< RNG internal process is ongoing     */
+  HAL_RNG_STATE_TIMEOUT   = 0x03,  /*!< RNG timeout state                   */
+  HAL_RNG_STATE_ERROR     = 0x04   /*!< RNG error state                     */
+
+}HAL_RNG_StateTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup RNG_Exported_Types_Group2 RNG Handle Structure definition
+  * @{
+  */
+typedef struct
+{
+  RNG_TypeDef                 *Instance;    /*!< Register base address   */
+
+  HAL_LockTypeDef             Lock;         /*!< RNG locking object      */
+
+  __IO HAL_RNG_StateTypeDef   State;        /*!< RNG communication state */
+
+  uint32_t                    RandomNumber; /*!< Last Generated RNG Data */
+
+}RNG_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Constants RNG Exported Constants
+  * @{
+  */
+
+/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition
+  * @{
+  */
+#define RNG_IT_DRDY  RNG_SR_DRDY  /*!< Data Ready interrupt  */
+#define RNG_IT_CEI   RNG_SR_CEIS  /*!< Clock error interrupt */
+#define RNG_IT_SEI   RNG_SR_SEIS  /*!< Seed error interrupt  */
+/**
+  * @}
+  */
+
+/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition
+  * @{
+  */
+#define RNG_FLAG_DRDY   RNG_SR_DRDY  /*!< Data ready                 */
+#define RNG_FLAG_CECS   RNG_SR_CECS  /*!< Clock error current status */
+#define RNG_FLAG_SECS   RNG_SR_SECS  /*!< Seed error current status  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Macros RNG Exported Macros
+  * @{
+  */
+
+/** @brief Reset RNG handle state
+  * @param  __HANDLE__: RNG Handle
+  * @retval None
+  */
+#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
+
+/**
+  * @brief  Enables the RNG peripheral.
+  * @param  __HANDLE__: RNG Handle
+  * @retval None
+  */
+#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |=  RNG_CR_RNGEN)
+
+/**
+  * @brief  Disables the RNG peripheral.
+  * @param  __HANDLE__: RNG Handle
+  * @retval None
+  */
+#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN)
+
+/**
+  * @brief  Check the selected RNG flag status.
+  * @param  __HANDLE__: RNG Handle
+  * @param  __FLAG__: RNG flag
+  *          This parameter can be one of the following values:
+  *            @arg RNG_FLAG_DRDY: Data ready
+  *            @arg RNG_FLAG_CECS: Clock error current status
+  *            @arg RNG_FLAG_SECS: Seed error current status
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clears the selected RNG flag status.
+  * @param  __HANDLE__: RNG handle
+  * @param  __FLAG__: RNG flag to clear
+  * @note   WARNING: This is a dummy macro for HAL code alignment,
+  *         flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only.
+  * @retval None
+  */
+#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__)                      /* dummy  macro */
+
+
+
+/**
+  * @brief  Enables the RNG interrupts.
+  * @param  __HANDLE__: RNG Handle
+  * @retval None
+  */
+#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |=  RNG_CR_IE)
+
+/**
+  * @brief  Disables the RNG interrupts.
+  * @param  __HANDLE__: RNG Handle
+  * @retval None
+  */
+#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE)
+
+/**
+  * @brief  Checks whether the specified RNG interrupt has occurred or not.
+  * @param  __HANDLE__: RNG Handle
+  * @param  __INTERRUPT__: specifies the RNG interrupt status flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg RNG_IT_DRDY: Data ready interrupt
+  *            @arg RNG_IT_CEI: Clock error interrupt
+  *            @arg RNG_IT_SEI: Seed error interrupt
+  * @retval The new state of __INTERRUPT__ (SET or RESET).
+  */
+#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @brief  Clear the RNG interrupt status flags.
+  * @param  __HANDLE__: RNG Handle
+  * @param  __INTERRUPT__: specifies the RNG interrupt status flag to clear.
+  *          This parameter can be one of the following values:
+  *            @arg RNG_IT_CEI: Clock error interrupt
+  *            @arg RNG_IT_SEI: Seed error interrupt
+  * @note   RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY.
+  * @retval None
+  */
+#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RNG_Exported_Functions RNG Exported Functions
+  * @{
+  */
+
+/** @defgroup RNG_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng);
+HAL_StatusTypeDef HAL_RNG_DeInit (RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng);
+
+/**
+  * @}
+  */
+
+/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions
+  * @{
+  */
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng);    /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead    */
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */
+
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit);
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng);
+uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng);
+
+void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef* hrng, uint32_t random32bit);
+
+/**
+  * @}
+  */
+
+/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions
+  * @{
+  */
+HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup RNG_Private_Types RNG Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup RNG_Private_Defines RNG Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Variables RNG Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Constants RNG Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RNG_Private_Macros RNG Private Macros
+  * @{
+  */
+#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \
+                       ((IT) == RNG_IT_SEI))
+
+#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
+                           ((FLAG) == RNG_FLAG_CECS) || \
+                           ((FLAG) == RNG_FLAG_SECS))
+
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup RNG_Private_Functions_Prototypes RNG Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Functions RNG Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_RNG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h
new file mode 100644
index 0000000..1c39baf
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h
@@ -0,0 +1,830 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rtc.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of RTC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RTC_H
+#define __STM32F4xx_HAL_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RTC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Types RTC Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_RTC_STATE_RESET             = 0x00,  /*!< RTC not yet initialized or disabled */
+  HAL_RTC_STATE_READY             = 0x01,  /*!< RTC initialized and ready for use   */
+  HAL_RTC_STATE_BUSY              = 0x02,  /*!< RTC process is ongoing              */
+  HAL_RTC_STATE_TIMEOUT           = 0x03,  /*!< RTC timeout state                   */
+  HAL_RTC_STATE_ERROR             = 0x04   /*!< RTC error state                     */
+
+}HAL_RTCStateTypeDef;
+
+/**
+  * @brief  RTC Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t HourFormat;      /*!< Specifies the RTC Hour Format.
+                                 This parameter can be a value of @ref RTC_Hour_Formats */
+
+  uint32_t AsynchPrediv;    /*!< Specifies the RTC Asynchronous Predivider value.
+                                 This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
+
+  uint32_t SynchPrediv;     /*!< Specifies the RTC Synchronous Predivider value.
+                                 This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */
+
+  uint32_t OutPut;          /*!< Specifies which signal will be routed to the RTC output.
+                                 This parameter can be a value of @ref RTC_Output_selection_Definitions */
+
+  uint32_t OutPutPolarity;  /*!< Specifies the polarity of the output signal.
+                                 This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
+
+  uint32_t OutPutType;      /*!< Specifies the RTC Output Pin mode.
+                                 This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
+}RTC_InitTypeDef;
+
+/**
+  * @brief  RTC Time structure definition
+  */
+typedef struct
+{
+  uint8_t Hours;            /*!< Specifies the RTC Time Hour.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected  */
+
+  uint8_t Minutes;          /*!< Specifies the RTC Time Minutes.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+  uint8_t Seconds;          /*!< Specifies the RTC Time Seconds.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+  uint8_t TimeFormat;       /*!< Specifies the RTC AM/PM Time.
+                                 This parameter can be a value of @ref RTC_AM_PM_Definitions */
+
+  uint32_t SubSeconds;     /*!< Specifies the RTC_SSR RTC Sub Second register content.
+                                 This parameter corresponds to a time unit range between [0-1] Second
+                                 with [1 Sec / SecondFraction +1] granularity */
+
+  uint32_t SecondFraction;  /*!< Specifies the range or granularity of Sub Second register content
+                                 corresponding to Synchronous pre-scaler factor value (PREDIV_S)
+                                 This parameter corresponds to a time unit range between [0-1] Second
+                                 with [1 Sec / SecondFraction +1] granularity.
+                                 This field will be used only by HAL_RTC_GetTime function */
+
+  uint32_t DayLightSaving;  /*!< Specifies DayLight Save Operation.
+                                 This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+
+  uint32_t StoreOperation;  /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
+                                 in CR register to store the operation.
+                                 This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+}RTC_TimeTypeDef;
+
+/**
+  * @brief  RTC Date structure definition
+  */
+typedef struct
+{
+  uint8_t WeekDay;  /*!< Specifies the RTC Date WeekDay.
+                         This parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+  uint8_t Month;    /*!< Specifies the RTC Date Month (in BCD format).
+                         This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+  uint8_t Date;     /*!< Specifies the RTC Date.
+                         This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+  uint8_t Year;     /*!< Specifies the RTC Date Year.
+                         This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+
+}RTC_DateTypeDef;
+
+/**
+  * @brief  RTC Alarm structure definition
+  */
+typedef struct
+{
+  RTC_TimeTypeDef AlarmTime;     /*!< Specifies the RTC Alarm Time members */
+
+  uint32_t AlarmMask;            /*!< Specifies the RTC Alarm Masks.
+                                      This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+
+  uint32_t AlarmSubSecondMask;   /*!< Specifies the RTC Alarm SubSeconds Masks.
+                                      This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
+
+  uint32_t AlarmDateWeekDaySel;  /*!< Specifies the RTC Alarm is on Date or WeekDay.
+                                     This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+
+  uint8_t AlarmDateWeekDay;      /*!< Specifies the RTC Alarm Date/WeekDay.
+                                      If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+                                      If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+  uint32_t Alarm;                /*!< Specifies the alarm .
+                                      This parameter can be a value of @ref RTC_Alarms_Definitions */
+}RTC_AlarmTypeDef;
+
+/**
+  * @brief  RTC Handle Structure definition
+  */
+typedef struct
+{
+  RTC_TypeDef                 *Instance;  /*!< Register base address    */
+
+  RTC_InitTypeDef             Init;       /*!< RTC required parameters  */
+
+  HAL_LockTypeDef             Lock;       /*!< RTC locking object       */
+
+  __IO HAL_RTCStateTypeDef    State;      /*!< Time communication state */
+
+}RTC_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Constants RTC Exported Constants
+  * @{
+  */
+
+/** @defgroup RTC_Hour_Formats RTC Hour Formats
+  * @{
+  */
+#define RTC_HOURFORMAT_24              ((uint32_t)0x00000000)
+#define RTC_HOURFORMAT_12              ((uint32_t)0x00000040)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Output_selection_Definitions RTC Output Selection Definitions
+  * @{
+  */
+#define RTC_OUTPUT_DISABLE             ((uint32_t)0x00000000)
+#define RTC_OUTPUT_ALARMA              ((uint32_t)0x00200000)
+#define RTC_OUTPUT_ALARMB              ((uint32_t)0x00400000)
+#define RTC_OUTPUT_WAKEUP              ((uint32_t)0x00600000)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions
+  * @{
+  */
+#define RTC_OUTPUT_POLARITY_HIGH       ((uint32_t)0x00000000)
+#define RTC_OUTPUT_POLARITY_LOW        ((uint32_t)0x00100000)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
+  * @{
+  */
+#define RTC_OUTPUT_TYPE_OPENDRAIN      ((uint32_t)0x00000000)
+#define RTC_OUTPUT_TYPE_PUSHPULL       ((uint32_t)0x00040000)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
+  * @{
+  */
+#define RTC_HOURFORMAT12_AM            ((uint8_t)0x00)
+#define RTC_HOURFORMAT12_PM            ((uint8_t)0x40)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_DayLightSaving_Definitions RTC DayLight Saving Definitions
+  * @{
+  */
+#define RTC_DAYLIGHTSAVING_SUB1H       ((uint32_t)0x00020000)
+#define RTC_DAYLIGHTSAVING_ADD1H       ((uint32_t)0x00010000)
+#define RTC_DAYLIGHTSAVING_NONE        ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_StoreOperation_Definitions RTC Store Operation Definitions
+  * @{
+  */
+#define RTC_STOREOPERATION_RESET        ((uint32_t)0x00000000)
+#define RTC_STOREOPERATION_SET          ((uint32_t)0x00040000)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions
+  * @{
+  */
+#define RTC_FORMAT_BIN                      ((uint32_t)0x000000000)
+#define RTC_FORMAT_BCD                      ((uint32_t)0x000000001)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
+  * @{
+  */
+/* Coded in BCD format */
+#define RTC_MONTH_JANUARY              ((uint8_t)0x01)
+#define RTC_MONTH_FEBRUARY             ((uint8_t)0x02)
+#define RTC_MONTH_MARCH                ((uint8_t)0x03)
+#define RTC_MONTH_APRIL                ((uint8_t)0x04)
+#define RTC_MONTH_MAY                  ((uint8_t)0x05)
+#define RTC_MONTH_JUNE                 ((uint8_t)0x06)
+#define RTC_MONTH_JULY                 ((uint8_t)0x07)
+#define RTC_MONTH_AUGUST               ((uint8_t)0x08)
+#define RTC_MONTH_SEPTEMBER            ((uint8_t)0x09)
+#define RTC_MONTH_OCTOBER              ((uint8_t)0x10)
+#define RTC_MONTH_NOVEMBER             ((uint8_t)0x11)
+#define RTC_MONTH_DECEMBER             ((uint8_t)0x12)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
+  * @{
+  */
+#define RTC_WEEKDAY_MONDAY             ((uint8_t)0x01)
+#define RTC_WEEKDAY_TUESDAY            ((uint8_t)0x02)
+#define RTC_WEEKDAY_WEDNESDAY          ((uint8_t)0x03)
+#define RTC_WEEKDAY_THURSDAY           ((uint8_t)0x04)
+#define RTC_WEEKDAY_FRIDAY             ((uint8_t)0x05)
+#define RTC_WEEKDAY_SATURDAY           ((uint8_t)0x06)
+#define RTC_WEEKDAY_SUNDAY             ((uint8_t)0x07)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC Alarm Date WeekDay Definitions
+  * @{
+  */
+#define RTC_ALARMDATEWEEKDAYSEL_DATE      ((uint32_t)0x00000000)
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY   ((uint32_t)0x40000000)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_AlarmMask_Definitions RTC Alarm Mask Definitions
+  * @{
+  */
+#define RTC_ALARMMASK_NONE                ((uint32_t)0x00000000)
+#define RTC_ALARMMASK_DATEWEEKDAY         RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS               RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES             RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS             RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL                 ((uint32_t)0x80808080)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions
+  * @{
+  */
+#define RTC_ALARM_A                       RTC_CR_ALRAE
+#define RTC_ALARM_B                       RTC_CR_ALRBE
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions
+  * @{
+  */
+#define RTC_ALARMSUBSECONDMASK_ALL         ((uint32_t)0x00000000)  /*!< All Alarm SS fields are masked.
+                                                                        There is no comparison on sub seconds
+                                                                        for Alarm */
+#define RTC_ALARMSUBSECONDMASK_SS14_1      ((uint32_t)0x01000000)  /*!< SS[14:1] are don't care in Alarm
+                                                                        comparison. Only SS[0] is compared.    */
+#define RTC_ALARMSUBSECONDMASK_SS14_2      ((uint32_t)0x02000000)  /*!< SS[14:2] are don't care in Alarm
+                                                                        comparison. Only SS[1:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_3      ((uint32_t)0x03000000)  /*!< SS[14:3] are don't care in Alarm
+                                                                        comparison. Only SS[2:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_4      ((uint32_t)0x04000000)  /*!< SS[14:4] are don't care in Alarm
+                                                                        comparison. Only SS[3:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_5      ((uint32_t)0x05000000)  /*!< SS[14:5] are don't care in Alarm
+                                                                        comparison. Only SS[4:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_6      ((uint32_t)0x06000000)  /*!< SS[14:6] are don't care in Alarm
+                                                                        comparison. Only SS[5:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_7      ((uint32_t)0x07000000)  /*!< SS[14:7] are don't care in Alarm
+                                                                        comparison. Only SS[6:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_8      ((uint32_t)0x08000000)  /*!< SS[14:8] are don't care in Alarm
+                                                                        comparison. Only SS[7:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_9      ((uint32_t)0x09000000)  /*!< SS[14:9] are don't care in Alarm
+                                                                        comparison. Only SS[8:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_10     ((uint32_t)0x0A000000)  /*!< SS[14:10] are don't care in Alarm
+                                                                        comparison. Only SS[9:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_11     ((uint32_t)0x0B000000)  /*!< SS[14:11] are don't care in Alarm
+                                                                        comparison. Only SS[10:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_12     ((uint32_t)0x0C000000)  /*!< SS[14:12] are don't care in Alarm
+                                                                        comparison.Only SS[11:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_13     ((uint32_t)0x0D000000)  /*!< SS[14:13] are don't care in Alarm
+                                                                        comparison. Only SS[12:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14        ((uint32_t)0x0E000000)  /*!< SS[14] is don't care in Alarm
+                                                                        comparison.Only SS[13:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_NONE        ((uint32_t)0x0F000000)  /*!< SS[14:0] are compared and must match
+                                                                        to activate alarm. */
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions
+  * @{
+  */
+#define RTC_IT_TS                         ((uint32_t)0x00008000)
+#define RTC_IT_WUT                        ((uint32_t)0x00004000)
+#define RTC_IT_ALRB                       ((uint32_t)0x00002000)
+#define RTC_IT_ALRA                       ((uint32_t)0x00001000)
+#define RTC_IT_TAMP                       ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */
+#define RTC_IT_TAMP1                      ((uint32_t)0x00020000)
+#define RTC_IT_TAMP2                      ((uint32_t)0x00040000)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Flags_Definitions RTC Flags Definitions
+  * @{
+  */
+#define RTC_FLAG_RECALPF                  ((uint32_t)0x00010000)
+#define RTC_FLAG_TAMP2F                   ((uint32_t)0x00004000)
+#define RTC_FLAG_TAMP1F                   ((uint32_t)0x00002000)
+#define RTC_FLAG_TSOVF                    ((uint32_t)0x00001000)
+#define RTC_FLAG_TSF                      ((uint32_t)0x00000800)
+#define RTC_FLAG_WUTF                     ((uint32_t)0x00000400)
+#define RTC_FLAG_ALRBF                    ((uint32_t)0x00000200)
+#define RTC_FLAG_ALRAF                    ((uint32_t)0x00000100)
+#define RTC_FLAG_INITF                    ((uint32_t)0x00000040)
+#define RTC_FLAG_RSF                      ((uint32_t)0x00000020)
+#define RTC_FLAG_INITS                    ((uint32_t)0x00000010)
+#define RTC_FLAG_SHPF                     ((uint32_t)0x00000008)
+#define RTC_FLAG_WUTWF                    ((uint32_t)0x00000004)
+#define RTC_FLAG_ALRBWF                   ((uint32_t)0x00000002)
+#define RTC_FLAG_ALRAWF                   ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Macros RTC Exported Macros
+  * @{
+  */
+
+/** @brief Reset RTC handle state
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+
+/**
+  * @brief  Disable the write protection for RTC registers.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__)             \
+                        do{                                       \
+                            (__HANDLE__)->Instance->WPR = 0xCA;   \
+                            (__HANDLE__)->Instance->WPR = 0x53;   \
+                          } while(0)
+
+/**
+  * @brief  Enable the write protection for RTC registers.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__)              \
+                        do{                                       \
+                            (__HANDLE__)->Instance->WPR = 0xFF;   \
+                          } while(0)
+
+/**
+  * @brief  Enable the RTC ALARMA peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__)                           ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+  * @brief  Disable the RTC ALARMA peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__)                          ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+  * @brief  Enable the RTC ALARMB peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__)                           ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
+
+/**
+  * @brief  Disable the RTC ALARMB peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__)                          ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
+
+/**
+  * @brief  Enable the RTC Alarm interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+  *          This parameter can be any combination of the following values:
+  *             @arg RTC_IT_ALRA: Alarm A interrupt
+  *             @arg RTC_IT_ALRB: Alarm B interrupt
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__)          ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC Alarm interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+  *         This parameter can be any combination of the following values:
+  *            @arg RTC_IT_ALRA: Alarm A interrupt
+  *            @arg RTC_IT_ALRB: Alarm B interrupt
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__)         ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified RTC Alarm interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_ALRA: Alarm A interrupt
+  *            @arg RTC_IT_ALRB: Alarm B interrupt
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__)           (((((__HANDLE__)->Instance->ISR)& ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+
+/**
+  * @brief  Get the selected RTC Alarm's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Alarm Flag to check.
+  *         This parameter can be:
+  *            @arg RTC_FLAG_ALRAF
+  *            @arg RTC_FLAG_ALRBF
+  *            @arg RTC_FLAG_ALRAWF
+  *            @arg RTC_FLAG_ALRBWF
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__)                (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+  * @brief  Clear the RTC Alarm's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_ALRAF
+  *             @arg RTC_FLAG_ALRBF
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__)                  ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+
+/**
+  * @brief  Check whether the specified RTC Alarm interrupt has been enabled or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_ALRA: Alarm A interrupt
+  *            @arg RTC_IT_ALRB: Alarm B interrupt
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Enable interrupt on the RTC Alarm associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_IT()            (EXTI->IMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Disable interrupt on the RTC Alarm associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_IT()           (EXTI->IMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+  * @brief  Enable event on the RTC Alarm associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT()         (EXTI->EMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Disable event on the RTC Alarm associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT()         (EXTI->EMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+  * @brief  Enable falling edge trigger on the RTC Alarm associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Disable falling edge trigger on the RTC Alarm associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+  * @brief  Enable rising edge trigger on the RTC Alarm associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Disable rising edge trigger on the RTC Alarm associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+  * @brief  Enable rising & falling edge trigger on the RTC Alarm associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief  Disable rising & falling edge trigger on the RTC Alarm associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+  * @brief Check whether the RTC Alarm associated Exti line interrupt flag is set or not.
+  * @retval Line Status.
+  */
+#define __HAL_RTC_ALARM_EXTI_GET_FLAG()              (EXTI->PR & RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief Clear the RTC Alarm associated Exti line flag.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()            (EXTI->PR = RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief Generate a Software interrupt on RTC Alarm associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()         (EXTI->SWIER |= RTC_EXTI_LINE_ALARM_EVENT)
+/**
+  * @}
+  */
+
+/* Include RTC HAL Extension module */
+#include "stm32f4xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void       HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void       HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group2
+  * @{
+  */
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group3
+  * @{
+  */
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void                HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef   HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void         HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef   HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group5
+  * @{
+  */
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTC_Private_Constants RTC Private Constants
+  * @{
+  */
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK    ((uint32_t)0x007F7F7F)
+#define RTC_DR_RESERVED_MASK    ((uint32_t)0x00FFFF3F)
+#define RTC_INIT_MASK           ((uint32_t)0xFFFFFFFF)
+#define RTC_RSF_MASK            ((uint32_t)0xFFFFFF5F)
+#define RTC_FLAGS_MASK          ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
+                                            RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \
+                                            RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \
+                                            RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \
+                                            RTC_FLAG_RECALPF | RTC_FLAG_SHPF))
+
+#define RTC_TIMEOUT_VALUE       1000
+
+#define RTC_EXTI_LINE_ALARM_EVENT             ((uint32_t)EXTI_IMR_MR17)  /*!< External interrupt line 17 Connected to the RTC Alarm event */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTC_Private_Macros RTC Private Macros
+  * @{
+  */
+
+/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters
+  * @{
+  */
+#define IS_RTC_HOUR_FORMAT(FORMAT)     (((FORMAT) == RTC_HOURFORMAT_12) || \
+                                        ((FORMAT) == RTC_HOURFORMAT_24))
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+                               ((OUTPUT) == RTC_OUTPUT_ALARMA)  || \
+                               ((OUTPUT) == RTC_OUTPUT_ALARMB)  || \
+                               ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
+                                ((POL) == RTC_OUTPUT_POLARITY_LOW))
+#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+                                  ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
+#define IS_RTC_HOUR12(HOUR)            (((HOUR) > (uint32_t)0) && ((HOUR) <= (uint32_t)12))
+#define IS_RTC_HOUR24(HOUR)            ((HOUR) <= (uint32_t)23)
+#define IS_RTC_ASYNCH_PREDIV(PREDIV)   ((PREDIV) <= (uint32_t)0x7F)
+#define IS_RTC_SYNCH_PREDIV(PREDIV)    ((PREDIV) <= (uint32_t)0x7FFF)
+#define IS_RTC_MINUTES(MINUTES)        ((MINUTES) <= (uint32_t)59)
+#define IS_RTC_SECONDS(SECONDS)        ((SECONDS) <= (uint32_t)59)
+
+#define IS_RTC_HOURFORMAT12(PM)  (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
+#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
+                                      ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
+                                      ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
+#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
+                                           ((OPERATION) == RTC_STOREOPERATION_SET))
+#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD))
+#define IS_RTC_YEAR(YEAR)              ((YEAR) <= (uint32_t)99)
+#define IS_RTC_MONTH(MONTH)            (((MONTH) >= (uint32_t)1) && ((MONTH) <= (uint32_t)12))
+#define IS_RTC_DATE(DATE)              (((DATE) >= (uint32_t)1) && ((DATE) <= (uint32_t)31))
+#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY)    || \
+                                 ((WEEKDAY) == RTC_WEEKDAY_TUESDAY)   || \
+                                 ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+                                 ((WEEKDAY) == RTC_WEEKDAY_THURSDAY)  || \
+                                 ((WEEKDAY) == RTC_WEEKDAY_FRIDAY)    || \
+                                 ((WEEKDAY) == RTC_WEEKDAY_SATURDAY)  || \
+                                 ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0) && ((DATE) <= (uint32_t)31))
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY)    || \
+                                                    ((WEEKDAY) == RTC_WEEKDAY_TUESDAY)   || \
+                                                    ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+                                                    ((WEEKDAY) == RTC_WEEKDAY_THURSDAY)  || \
+                                                    ((WEEKDAY) == RTC_WEEKDAY_FRIDAY)    || \
+                                                    ((WEEKDAY) == RTC_WEEKDAY_SATURDAY)  || \
+                                                    ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+                                            ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+#define IS_RTC_ALARM_MASK(MASK)  (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET)
+#define IS_RTC_ALARM(ALARM)      (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= (uint32_t)0x00007FFF)
+
+#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK)   (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
+                                              ((MASK) == RTC_ALARMSUBSECONDMASK_NONE))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RTC_Private_Functions RTC Private Functions
+  * @{
+  */
+HAL_StatusTypeDef  RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
+uint8_t            RTC_ByteToBcd2(uint8_t Value);
+uint8_t            RTC_Bcd2ToByte(uint8_t Value);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h
new file mode 100644
index 0000000..1dac76f
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h
@@ -0,0 +1,1000 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rtc_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of RTC HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RTC_EX_H
+#define __STM32F4xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RTCEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
+  * @{
+  */
+
+/**
+  * @brief  RTC Tamper structure definition
+  */
+typedef struct
+{
+  uint32_t Tamper;                      /*!< Specifies the Tamper Pin.
+                                             This parameter can be a value of @ref  RTCEx_Tamper_Pins_Definitions */
+
+  uint32_t PinSelection;                /*!< Specifies the Tamper Pin.
+                                             This parameter can be a value of @ref  RTCEx_Tamper_Pins_Selection */
+
+  uint32_t Trigger;                     /*!< Specifies the Tamper Trigger.
+                                             This parameter can be a value of @ref  RTCEx_Tamper_Trigger_Definitions */
+
+  uint32_t Filter;                      /*!< Specifies the RTC Filter Tamper.
+                                             This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+  uint32_t SamplingFrequency;           /*!< Specifies the sampling frequency.
+                                             This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+  uint32_t PrechargeDuration;           /*!< Specifies the Precharge Duration .
+                                             This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+  uint32_t TamperPullUp;                /*!< Specifies the Tamper PullUp .
+                                             This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
+
+  uint32_t TimeStampOnTamperDetection;  /*!< Specifies the TimeStampOnTamperDetection.
+                                             This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+}RTC_TamperTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
+  * @{
+  */
+
+/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
+  * @{
+  */
+#define RTC_BKP_DR0                       ((uint32_t)0x00000000)
+#define RTC_BKP_DR1                       ((uint32_t)0x00000001)
+#define RTC_BKP_DR2                       ((uint32_t)0x00000002)
+#define RTC_BKP_DR3                       ((uint32_t)0x00000003)
+#define RTC_BKP_DR4                       ((uint32_t)0x00000004)
+#define RTC_BKP_DR5                       ((uint32_t)0x00000005)
+#define RTC_BKP_DR6                       ((uint32_t)0x00000006)
+#define RTC_BKP_DR7                       ((uint32_t)0x00000007)
+#define RTC_BKP_DR8                       ((uint32_t)0x00000008)
+#define RTC_BKP_DR9                       ((uint32_t)0x00000009)
+#define RTC_BKP_DR10                      ((uint32_t)0x0000000A)
+#define RTC_BKP_DR11                      ((uint32_t)0x0000000B)
+#define RTC_BKP_DR12                      ((uint32_t)0x0000000C)
+#define RTC_BKP_DR13                      ((uint32_t)0x0000000D)
+#define RTC_BKP_DR14                      ((uint32_t)0x0000000E)
+#define RTC_BKP_DR15                      ((uint32_t)0x0000000F)
+#define RTC_BKP_DR16                      ((uint32_t)0x00000010)
+#define RTC_BKP_DR17                      ((uint32_t)0x00000011)
+#define RTC_BKP_DR18                      ((uint32_t)0x00000012)
+#define RTC_BKP_DR19                      ((uint32_t)0x00000013)
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC TimeStamp Edges Definitions
+  * @{
+  */
+#define RTC_TIMESTAMPEDGE_RISING          ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPEDGE_FALLING         ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions
+  * @{
+  */
+#define RTC_TAMPER_1                    RTC_TAFCR_TAMP1E
+#define RTC_TAMPER_2                    RTC_TAFCR_TAMP2E
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Pins_Selection RTC tamper Pins Selection
+  * @{
+  */
+#define RTC_TAMPERPIN_DEFAULT               ((uint32_t)0x00000000)
+#define RTC_TAMPERPIN_POS1                  ((uint32_t)0x00010000)
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection
+  * @{
+  */
+#define RTC_TIMESTAMPPIN_DEFAULT            ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPPIN_POS1               ((uint32_t)0x00020000)
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions
+  * @{
+  */
+#define RTC_TAMPERTRIGGER_RISINGEDGE       ((uint32_t)0x00000000)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE      ((uint32_t)0x00000002)
+#define RTC_TAMPERTRIGGER_LOWLEVEL         RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL        RTC_TAMPERTRIGGER_FALLINGEDGE
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions
+  * @{
+  */
+#define RTC_TAMPERFILTER_DISABLE   ((uint32_t)0x00000000)  /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE   ((uint32_t)0x00000800)  /*!< Tamper is activated after 2
+                                                                consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE   ((uint32_t)0x00001000)  /*!< Tamper is activated after 4
+                                                                consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE   ((uint32_t)0x00001800)  /*!< Tamper is activated after 8
+                                                                consecutive samples at the active level. */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions
+  * @{
+  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768  ((uint32_t)0x00000000)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384  ((uint32_t)0x00000100)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192   ((uint32_t)0x00000200)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 8192  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096   ((uint32_t)0x00000300)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 4096  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048   ((uint32_t)0x00000400)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 2048  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024   ((uint32_t)0x00000500)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 1024  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512    ((uint32_t)0x00000600)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 512   */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256    ((uint32_t)0x00000700)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 256   */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions
+  * @{
+  */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000)  /*!< Tamper pins are pre-charged before
+                                                                         sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000)  /*!< Tamper pins are pre-charged before
+                                                                         sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000)  /*!< Tamper pins are pre-charged before
+                                                                         sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000)  /*!< Tamper pins are pre-charged before
+                                                                         sampling during 8 RTCCLK cycles */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions
+  * @{
+  */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE  ((uint32_t)RTC_TAFCR_TAMPTS)  /*!< TimeStamp on Tamper Detection event saved        */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000)        /*!< TimeStamp on Tamper Detection event is not saved */
+/**
+  * @}
+  */
+
+/** @defgroup  RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions
+  * @{
+  */
+#define RTC_TAMPER_PULLUP_ENABLE  ((uint32_t)0x00000000)            /*!< TimeStamp on Tamper Detection event saved        */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS)   /*!< TimeStamp on Tamper Detection event is not saved */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wake-up Timer Definitions
+  * @{
+  */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16        ((uint32_t)0x00000000)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8         ((uint32_t)0x00000001)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4         ((uint32_t)0x00000002)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2         ((uint32_t)0x00000003)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS      ((uint32_t)0x00000004)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS      ((uint32_t)0x00000006)
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Digital_Calibration_Definitions RTC Digital Calib Definitions
+  * @{
+  */
+#define RTC_CALIBSIGN_POSITIVE            ((uint32_t)0x00000000)
+#define RTC_CALIBSIGN_NEGATIVE            ((uint32_t)0x00000080)
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions
+  * @{
+  */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC   ((uint32_t)0x00000000)  /*!< If RTCCLK = 32768 Hz, Smooth calibration
+                                                                    period is 32s,  else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC   ((uint32_t)0x00002000)  /*!< If RTCCLK = 32768 Hz, Smooth calibration
+                                                                    period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC    ((uint32_t)0x00004000)  /*!< If RTCCLK = 32768 Hz, Smooth calibration
+                                                                    period is 8s, else 2exp18 RTCCLK seconds */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions
+  * @{
+  */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET    ((uint32_t)0x00008000)  /*!< The number of RTCCLK pulses added
+                                                                       during a X -second window = Y - CALM[8:0]
+                                                                       with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET  ((uint32_t)0x00000000)  /*!< The number of RTCCLK pulses subbstited
+                                                                       during a 32-second window = CALM[8:0] */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions
+  * @{
+  */
+#define RTC_SHIFTADD1S_RESET      ((uint32_t)0x00000000)
+#define RTC_SHIFTADD1S_SET        ((uint32_t)0x80000000)
+/**
+  * @}
+  */
+
+
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions
+  * @{
+  */
+#define RTC_CALIBOUTPUT_512HZ            ((uint32_t)0x00000000)
+#define RTC_CALIBOUTPUT_1HZ              ((uint32_t)0x00080000)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
+  * @{
+  */
+
+/* ---------------------------------WAKEUPTIMER---------------------------------*/
+/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
+  * @{
+  */
+
+/**
+  * @brief  Enable the RTC WakeUp Timer peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+
+/**
+  * @brief  Disable the RTC Wake-up Timer peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__)                     ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+
+/**
+  * @brief  Enable the RTC WakeUpTimer interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT: WakeUpTimer A interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC WakeUpTimer interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT: WakeUpTimer A interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC WakeUpTimer interrupt to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT:  WakeUpTimer A interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__)            (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+
+/**
+  * @brief  Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT:  WakeUpTimer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)   (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Get the selected RTC WakeUpTimer's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC WakeUpTimer Flag to check.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_WUTF
+  *             @arg RTC_FLAG_WUTWF
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__)          (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+  * @brief  Clear the RTC Wake Up timer's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+  *         This parameter can be:
+  *            @arg RTC_FLAG_WUTF
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__)            ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+  * @brief  Enable interrupt on the RTC Wake-up Timer associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT()       (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable interrupt on the RTC Wake-up Timer associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT()      (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+  * @brief  Enable event on the RTC Wake-up Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT()    (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable event on the RTC Wake-up Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT()   (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+  * @brief  Enable falling edge trigger on the RTC Wake-up Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable falling edge trigger on the RTC Wake-up Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+  * @brief  Enable rising edge trigger on the RTC Wake-up Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable rising edge trigger on the RTC Wake-up Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+  * @brief  Enable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief  Disable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+  * @brief Check whether the RTC Wake-up Timer associated Exti line interrupt flag is set or not.
+  * @retval Line Status.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG()              (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief Clear the RTC Wake-up Timer associated Exti line flag.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG()            (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief Generate a Software interrupt on the RTC Wake-up Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT()         (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @}
+  */
+
+/* ---------------------------------TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Timestamp RTC Timestamp
+  * @{
+  */
+
+/**
+  * @brief  Enable the RTC TimeStamp peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__)                        ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+  * @brief  Disable the RTC TimeStamp peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__)                       ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+  * @brief  Enable the RTC TimeStamp interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__)      ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC TimeStamp interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified RTC TimeStamp interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC TimeStamp interrupt to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__)         (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+
+/**
+  * @brief  Check whether the specified RTC Time Stamp interrupt has been enabled or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Get the selected RTC TimeStamp's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC TimeStamp flag to check.
+  *         This parameter can be:
+  *            @arg RTC_FLAG_TSF
+  *            @arg RTC_FLAG_TSOVF
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__)            (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+  * @brief  Clear the RTC Time Stamp's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TSF
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)          ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+  * @}
+  */
+
+/* ---------------------------------TAMPER------------------------------------*/
+/** @defgroup RTCEx_Tamper RTC Tamper
+  * @{
+  */
+
+/**
+  * @brief  Enable the RTC Tamper1 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))
+
+/**
+  * @brief  Disable the RTC Tamper1 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))
+
+/**
+  * @brief  Enable the RTC Tamper2 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))
+
+/**
+  * @brief  Disable the RTC Tamper2 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))
+
+/**
+  * @brief  Check whether the specified RTC Tamper interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt to check.
+  *         This parameter can be:
+  *            @arg  RTC_IT_TAMP1
+  *            @arg  RTC_IT_TAMP2
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__)       (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+
+/**
+  * @brief  Check whether the specified RTC Tamper interrupt has been enabled or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_TAMP: Tamper interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Get the selected RTC Tamper's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TAMP1F
+  *             @arg RTC_FLAG_TAMP2F
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__)               (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+  * @brief  Clear the RTC Tamper's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Tamper Flag to clear.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TAMP1F
+  *             @arg RTC_FLAG_TAMP2F
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)         ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+/**
+  * @}
+  */
+
+/* --------------------------TAMPER/TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
+  * @{
+  */
+
+/**
+  * @brief  Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()        (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()       (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+  * @brief  Enable event on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT()    (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable event on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT()   (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+  * @brief  Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+  * @brief  Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+  * @brief  Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief  Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+  * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
+  * @retval Line Status.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()         (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()       (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()    (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+/**
+  * @}
+  */
+
+/* ------------------------------Calibration----------------------------------*/
+/** @defgroup RTCEx_Calibration RTC Calibration
+  * @{
+  */
+
+/**
+  * @brief  Enable the Coarse calibration process.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__)                       ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))
+
+/**
+  * @brief  Disable the Coarse calibration process.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
+
+/**
+  * @brief  Enable the RTC calibration output.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+  * @brief  Disable the calibration output.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+  * @brief  Enable the clock reference detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+  * @brief  Disable the clock reference detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+  * @brief  Get the selected RTC shift operation's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC shift operation Flag is pending or not.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_SHPF
+  * @retval None
+  */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__)                (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+  * @{
+  */
+
+/** @addtogroup RTCEx_Exported_Functions_Group1
+  * @{
+  */
+/* RTC TimeStamp and Tamper functions *****************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @addtogroup RTCEx_Exported_Functions_Group2
+  * @{
+  */
+/* RTC Wake-up functions ******************************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @addtogroup RTCEx_Exported_Functions_Group3
+  * @{
+  */
+/* Extension Control functions ************************************************/
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+
+HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+
+/** @addtogroup RTCEx_Exported_Functions_Group4
+  * @{
+  */
+/* Extension RTC features functions *******************************************/
+void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
+  * @{
+  */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT  ((uint32_t)EXTI_IMR_MR21)  /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT       ((uint32_t)EXTI_IMR_MR22)  /*!< External interrupt line 22 Connected to the RTC Wake-up event */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
+  * @{
+  */
+
+/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
+  * @{
+  */
+#define IS_RTC_BKP(BKP)                   (((BKP) == RTC_BKP_DR0)  || \
+                                           ((BKP) == RTC_BKP_DR1)  || \
+                                           ((BKP) == RTC_BKP_DR2)  || \
+                                           ((BKP) == RTC_BKP_DR3)  || \
+                                           ((BKP) == RTC_BKP_DR4)  || \
+                                           ((BKP) == RTC_BKP_DR5)  || \
+                                           ((BKP) == RTC_BKP_DR6)  || \
+                                           ((BKP) == RTC_BKP_DR7)  || \
+                                           ((BKP) == RTC_BKP_DR8)  || \
+                                           ((BKP) == RTC_BKP_DR9)  || \
+                                           ((BKP) == RTC_BKP_DR10) || \
+                                           ((BKP) == RTC_BKP_DR11) || \
+                                           ((BKP) == RTC_BKP_DR12) || \
+                                           ((BKP) == RTC_BKP_DR13) || \
+                                           ((BKP) == RTC_BKP_DR14) || \
+                                           ((BKP) == RTC_BKP_DR15) || \
+                                           ((BKP) == RTC_BKP_DR16) || \
+                                           ((BKP) == RTC_BKP_DR17) || \
+                                           ((BKP) == RTC_BKP_DR18) || \
+                                           ((BKP) == RTC_BKP_DR19))
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+                                 ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E | RTC_TAFCR_TAMP2E))) == 0x00) && ((TAMPER) != (uint32_t)RESET))
+
+#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_DEFAULT) || \
+                                ((PIN) == RTC_TAMPERPIN_POS1))
+
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT) || \
+                                   ((PIN) == RTC_TIMESTAMPPIN_POS1))
+
+#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+                                        ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+                                        ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+                                        ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+#define IS_RTC_TAMPER_FILTER(FILTER)  (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+                                       ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+                                       ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+                                       ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512)  || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+                                                              ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+                                           ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16)   || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8)    || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4)    || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2)    || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_RTC_WAKEUP_COUNTER(COUNTER)  ((COUNTER) <= 0xFFFF)
+#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
+                                 ((SIGN) == RTC_CALIBSIGN_NEGATIVE))
+
+#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20)
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+                                            ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+                                            ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+                                        ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+
+
+#define  IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+                                 ((SEL) == RTC_SHIFTADD1S_SET))
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
+#define IS_RTC_CALIB_OUTPUT(OUTPUT)  (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+                                      ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai.h
new file mode 100644
index 0000000..f71f2fb
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai.h
@@ -0,0 +1,908 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_sai.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of SAI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SAI_H
+#define __STM32F4xx_HAL_SAI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/** @addtogroup SAI
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SAI_Exported_Types SAI Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_SAI_STATE_RESET      = 0x00,  /*!< SAI not yet initialized or disabled                */
+  HAL_SAI_STATE_READY      = 0x01,  /*!< SAI initialized and ready for use                  */
+  HAL_SAI_STATE_BUSY       = 0x02,  /*!< SAI internal process is ongoing                    */
+  HAL_SAI_STATE_BUSY_TX    = 0x12,  /*!< Data transmission process is ongoing               */
+  HAL_SAI_STATE_BUSY_RX    = 0x22,  /*!< Data reception process is ongoing                  */
+  HAL_SAI_STATE_TIMEOUT    = 0x03,  /*!< SAI timeout state                                  */
+  HAL_SAI_STATE_ERROR      = 0x04   /*!< SAI error state                                    */
+}HAL_SAI_StateTypeDef;
+
+/**
+  * @brief  SAI Callback prototype
+  */
+typedef void (*SAIcallback)(void);
+
+/**
+  * @brief  SAI Init Structure definition
+  */
+typedef struct
+{
+  uint32_t AudioMode;           /*!< Specifies the SAI Block audio Mode.
+                                     This parameter can be a value of @ref SAI_Block_Mode                 */
+
+  uint32_t Synchro;             /*!< Specifies SAI Block synchronization
+                                     This parameter can be a value of @ref SAI_Block_Synchronization           */
+
+  uint32_t SynchroExt;          /*!< Specifies SAI Block synchronization, this setup is common
+                                     for BLOCKA and BLOCKB
+                                     This parameter can be a value of @ref SAI_Block_SyncExt                   */
+
+  uint32_t OutputDrive;         /*!< Specifies when SAI Block outputs are driven.
+                                     This parameter can be a value of @ref SAI_Block_Output_Drive
+                                     @note this value has to be set before enabling the audio block
+                                     but after the audio block configuration.                                  */
+
+  uint32_t NoDivider;           /*!< Specifies whether master clock will be divided or not.
+                                     This parameter can be a value of @ref SAI_Block_NoDivider
+                                     @note: If bit NODIV in the SAI_xCR1 register is cleared, the frame length
+                                            should be aligned to a number equal to a power of 2, from 8 to 256.
+                                            If bit NODIV in the SAI_xCR1 register is set, the frame length can
+                                            take any of the values without constraint since the input clock of
+                                            the audio block should be equal to the bit clock.
+                                             There is no MCLK_x clock which can be output.                     */
+
+  uint32_t FIFOThreshold;       /*!< Specifies SAI Block FIFO threshold.
+                                     This parameter can be a value of @ref SAI_Block_Fifo_Threshold            */
+
+  uint32_t ClockSource;         /*!< Specifies the SAI Block x Clock source.
+                                     This parameter is not used for STM32F446xx devices.                       */
+
+  uint32_t AudioFrequency;      /*!< Specifies the audio frequency sampling.
+                                     This parameter can be a value of @ref SAI_Audio_Frequency                 */
+
+  uint32_t Mckdiv;              /*!< Specifies the master clock divider, the parameter will be used if for
+                                     AudioFrequency the user choice
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 15    */
+
+  uint32_t MonoStereoMode;      /*!< Specifies if the mono or stereo mode is selected.
+                                     This parameter can be a value of @ref SAI_Mono_Stereo_Mode                */
+
+  uint32_t CompandingMode;      /*!< Specifies the companding mode type.
+                                     This parameter can be a value of @ref SAI_Block_Companding_Mode           */
+
+  uint32_t TriState;            /*!< Specifies the companding mode type.
+                                     This parameter can be a value of @ref SAI_TRIState_Management             */
+
+  /* This part of the structure is automatically filled if your are using the high level intialisation
+     function HAL_SAI_InitProtocol                                                                             */
+
+  uint32_t Protocol;        /*!< Specifies the SAI Block protocol.
+                                 This parameter can be a value of @ref SAI_Block_Protocol                      */
+
+  uint32_t DataSize;        /*!< Specifies the SAI Block data size.
+                                 This parameter can be a value of @ref SAI_Block_Data_Size                     */
+
+  uint32_t FirstBit;        /*!< Specifies whether data transfers start from MSB or LSB bit.
+                                 This parameter can be a value of @ref SAI_Block_MSB_LSB_transmission          */
+
+  uint32_t ClockStrobing;   /*!< Specifies the SAI Block clock strobing edge sensitivity.
+                                 This parameter can be a value of @ref SAI_Block_Clock_Strobing                */
+}SAI_InitTypeDef;
+
+/**
+  * @brief  SAI Block Frame Init structure definition
+  */
+
+typedef struct
+{
+
+  uint32_t FrameLength;         /*!< Specifies the Frame length, the number of SCK clocks for each audio frame.
+                                     This parameter must be a number between Min_Data = 8 and Max_Data = 256.
+                                     @note: If master clock MCLK_x pin is declared as an output, the frame length
+                                            should be aligned to a number equal to power of 2 in order to keep
+                                            in an audio frame, an integer number of MCLK pulses by bit Clock. */
+
+  uint32_t ActiveFrameLength;  /*!< Specifies the Frame synchronization active level length.
+                                    This Parameter specifies the length in number of bit clock (SCK + 1)
+                                    of the active level of FS signal in audio frame.
+                                    This parameter must be a number between Min_Data = 1 and Max_Data = 128   */
+
+  uint32_t FSDefinition;       /*!< Specifies the Frame synchronization definition.
+                                    This parameter can be a value of @ref SAI_Block_FS_Definition             */
+
+  uint32_t FSPolarity;         /*!< Specifies the Frame synchronization Polarity.
+                                    This parameter can be a value of @ref SAI_Block_FS_Polarity               */
+
+  uint32_t FSOffset;           /*!< Specifies the Frame synchronization Offset.
+                                    This parameter can be a value of @ref SAI_Block_FS_Offset                 */
+
+}SAI_FrameInitTypeDef;
+
+/**
+  * @brief   SAI Block Slot Init Structure definition
+  */
+
+typedef struct
+{
+  uint32_t FirstBitOffset;  /*!< Specifies the position of first data transfer bit in the slot.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 24 */
+
+  uint32_t SlotSize;        /*!< Specifies the Slot Size.
+                                 This parameter can be a value of @ref SAI_Block_Slot_Size              */
+
+  uint32_t SlotNumber;      /*!< Specifies the number of slot in the audio frame.
+                                 This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+
+  uint32_t SlotActive;      /*!< Specifies the slots in audio frame that will be activated.
+                                 This parameter can be a value of @ref SAI_Block_Slot_Active            */
+}SAI_SlotInitTypeDef;
+
+/**
+  * @brief  SAI handle Structure definition
+  */
+typedef struct __SAI_HandleTypeDef
+{
+  SAI_Block_TypeDef         *Instance;  /*!< SAI Blockx registers base address        */
+
+  SAI_InitTypeDef           Init;       /*!< SAI communication parameters             */
+
+  SAI_FrameInitTypeDef      FrameInit;  /*!< SAI Frame configuration parameters       */
+
+  SAI_SlotInitTypeDef       SlotInit;   /*!< SAI Slot configuration parameters        */
+
+  uint8_t                  *pBuffPtr;  /*!< Pointer to SAI transfer Buffer            */
+
+  uint16_t                  XferSize;  /*!< SAI transfer size                         */
+
+  uint16_t                  XferCount; /*!< SAI transfer counter                      */
+
+  DMA_HandleTypeDef         *hdmatx;     /*!< SAI Tx DMA handle parameters            */
+
+  DMA_HandleTypeDef         *hdmarx;     /*!< SAI Rx DMA handle parameters            */
+
+  SAIcallback               mutecallback;/*!< SAI mute callback                */
+
+  void (*InterruptServiceRoutine)(struct __SAI_HandleTypeDef *hsai); /* function pointer for IRQ handler   */
+
+  HAL_LockTypeDef           Lock;        /*!< SAI locking object                      */
+
+  __IO HAL_SAI_StateTypeDef State;       /*!< SAI communication state                 */
+
+  __IO uint32_t             ErrorCode;   /*!< SAI Error code                          */
+}SAI_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Constants SAI Exported Constants
+  * @{
+  */
+
+/** @defgroup SAI_Error_Code SAI Error Code
+  * @{
+  */
+#define HAL_SAI_ERROR_NONE    ((uint32_t)0x00000000)  /*!< No error                                    */
+#define HAL_SAI_ERROR_OVR     ((uint32_t)0x00000001)  /*!< Overrun Error                               */
+#define HAL_SAI_ERROR_UDR     ((uint32_t)0x00000002)  /*!< Underrun error                              */
+#define HAL_SAI_ERROR_AFSDET  ((uint32_t)0x00000004)  /*!< Anticipated Frame synchronisation detection */
+#define HAL_SAI_ERROR_LFSDET  ((uint32_t)0x00000008)  /*!< Late Frame synchronisation detection        */
+#define HAL_SAI_ERROR_CNREADY ((uint32_t)0x00000010)  /*!< codec not ready                             */
+#define HAL_SAI_ERROR_WCKCFG  ((uint32_t)0x00000020)  /*!< Wrong clock configuration                   */
+#define HAL_SAI_ERROR_TIMEOUT ((uint32_t)0x00000040)  /*!< Timeout error                               */
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_SyncExt SAI External synchronisation
+  * @{
+  */
+#define SAI_SYNCEXT_DISABLE           ((uint32_t)0x00000000)
+#define SAI_SYNCEXT_IN_ENABLE         ((uint32_t)0x00000001)
+#define SAI_SYNCEXT_OUTBLOCKA_ENABLE  ((uint32_t)0x00000002)
+#define SAI_SYNCEXT_OUTBLOCKB_ENABLE  ((uint32_t)0x00000004)
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Protocol SAI Supported protocol
+  * @{
+  */
+#define SAI_I2S_STANDARD      ((uint32_t)0x00000000)
+#define SAI_I2S_MSBJUSTIFIED  ((uint32_t)0x00000001)
+#define SAI_I2S_LSBJUSTIFIED  ((uint32_t)0x00000002)
+#define SAI_PCM_LONG          ((uint32_t)0x00000004)
+#define SAI_PCM_SHORT         ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Protocol_DataSize SAI protocol data size
+  * @{
+  */
+#define SAI_PROTOCOL_DATASIZE_16BIT          ((uint32_t)0x00000000)
+#define SAI_PROTOCOL_DATASIZE_16BITEXTENDED  ((uint32_t)0x00000001)
+#define SAI_PROTOCOL_DATASIZE_24BIT          ((uint32_t)0x00000002)
+#define SAI_PROTOCOL_DATASIZE_32BIT          ((uint32_t)0x00000004)
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Clock_Source  SAI Clock Source
+  * @{
+  */
+#define SAI_CLKSOURCE_PLLSAI             ((uint32_t)0x00000000)
+#define SAI_CLKSOURCE_PLLI2S             ((uint32_t)0x00100000)
+#define SAI_CLKSOURCE_EXT                ((uint32_t)0x00200000)
+#define SAI_CLKSOURCE_NA                 ((uint32_t)0x00400000) /*!< No applicable for STM32F446xx  */
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Audio_Frequency SAI Audio Frequency
+  * @{
+  */
+#define SAI_AUDIO_FREQUENCY_192K          ((uint32_t)192000)
+#define SAI_AUDIO_FREQUENCY_96K           ((uint32_t)96000)
+#define SAI_AUDIO_FREQUENCY_48K           ((uint32_t)48000)
+#define SAI_AUDIO_FREQUENCY_44K           ((uint32_t)44100)
+#define SAI_AUDIO_FREQUENCY_32K           ((uint32_t)32000)
+#define SAI_AUDIO_FREQUENCY_22K           ((uint32_t)22050)
+#define SAI_AUDIO_FREQUENCY_16K           ((uint32_t)16000)
+#define SAI_AUDIO_FREQUENCY_11K           ((uint32_t)11025)
+#define SAI_AUDIO_FREQUENCY_8K            ((uint32_t)8000)
+#define SAI_AUDIO_FREQUENCY_MCKDIV        ((uint32_t)0)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Mode SAI Block Mode
+  * @{
+  */
+#define SAI_MODEMASTER_TX         ((uint32_t)0x00000000)
+#define SAI_MODEMASTER_RX         ((uint32_t)SAI_xCR1_MODE_0)
+#define SAI_MODESLAVE_TX          ((uint32_t)SAI_xCR1_MODE_1)
+#define SAI_MODESLAVE_RX          ((uint32_t)(SAI_xCR1_MODE_1 | SAI_xCR1_MODE_0))
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Protocol SAI Block Protocol
+  * @{
+  */
+#define SAI_FREE_PROTOCOL                 ((uint32_t)0x00000000)
+#define SAI_SPDIF_PROTOCOL                ((uint32_t)SAI_xCR1_PRTCFG_0)
+#define SAI_AC97_PROTOCOL                 ((uint32_t)SAI_xCR1_PRTCFG_1)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Data_Size SAI Block Data Size
+  * @{
+  */
+#define SAI_DATASIZE_8                   ((uint32_t)SAI_xCR1_DS_1)
+#define SAI_DATASIZE_10                  ((uint32_t)(SAI_xCR1_DS_1 | SAI_xCR1_DS_0))
+#define SAI_DATASIZE_16                  ((uint32_t)SAI_xCR1_DS_2)
+#define SAI_DATASIZE_20                  ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_0))
+#define SAI_DATASIZE_24                  ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1))
+#define SAI_DATASIZE_32                  ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1 | SAI_xCR1_DS_0))
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_MSB_LSB_transmission SAI Block MSB LSB transmission
+  * @{
+  */
+#define SAI_FIRSTBIT_MSB                  ((uint32_t)0x00000000)
+#define SAI_FIRSTBIT_LSB                  ((uint32_t)SAI_xCR1_LSBFIRST)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Clock_Strobing SAI Block Clock Strobing
+  * @{
+  */
+#define SAI_CLOCKSTROBING_FALLINGEDGE     ((uint32_t)0x00000000)
+#define SAI_CLOCKSTROBING_RISINGEDGE      ((uint32_t)SAI_xCR1_CKSTR)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Synchronization SAI Block Synchronization
+  * @{
+  */
+#define SAI_ASYNCHRONOUS                  ((uint32_t)0x00000000)
+#define SAI_SYNCHRONOUS                   ((uint32_t)SAI_xCR1_SYNCEN_0)
+#define SAI_SYNCHRONOUS_EXT               ((uint32_t)SAI_xCR1_SYNCEN_1)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Output_Drive SAI Block Output Drive
+  * @{
+  */
+#define SAI_OUTPUTDRIVE_DISABLE          ((uint32_t)0x00000000)
+#define SAI_OUTPUTDRIVE_ENABLE           ((uint32_t)SAI_xCR1_OUTDRIV)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_NoDivider SAI Block NoDivider
+  * @{
+  */
+#define SAI_MASTERDIVIDER_ENABLE         ((uint32_t)0x00000000)
+#define SAI_MASTERDIVIDER_DISABLE        ((uint32_t)SAI_xCR1_NODIV)
+
+/**
+  * @}
+  */
+
+
+/** @defgroup SAI_Block_FS_Definition SAI Block FS Definition
+  * @{
+  */
+#define SAI_FS_STARTFRAME                 ((uint32_t)0x00000000)
+#define SAI_FS_CHANNEL_IDENTIFICATION     ((uint32_t)SAI_xFRCR_FSDEF)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_FS_Polarity SAI Block FS Polarity
+  * @{
+  */
+#define SAI_FS_ACTIVE_LOW                  ((uint32_t)0x00000000)
+#define SAI_FS_ACTIVE_HIGH                 ((uint32_t)SAI_xFRCR_FSPO)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_FS_Offset SAI Block FS Offset
+  * @{
+  */
+#define SAI_FS_FIRSTBIT                   ((uint32_t)0x00000000)
+#define SAI_FS_BEFOREFIRSTBIT             ((uint32_t)SAI_xFRCR_FSOFF)
+
+/**
+  * @}
+  */
+
+
+  /** @defgroup SAI_Block_Slot_Size SAI Block Slot Size
+  * @{
+  */
+#define SAI_SLOTSIZE_DATASIZE             ((uint32_t)0x00000000)
+#define SAI_SLOTSIZE_16B                  ((uint32_t)SAI_xSLOTR_SLOTSZ_0)
+#define SAI_SLOTSIZE_32B                  ((uint32_t)SAI_xSLOTR_SLOTSZ_1)
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Slot_Active SAI Block Slot Active
+  * @{
+  */
+#define SAI_SLOT_NOTACTIVE           ((uint32_t)0x00000000)
+#define SAI_SLOTACTIVE_0             ((uint32_t)0x00010000)
+#define SAI_SLOTACTIVE_1             ((uint32_t)0x00020000)
+#define SAI_SLOTACTIVE_2             ((uint32_t)0x00040000)
+#define SAI_SLOTACTIVE_3             ((uint32_t)0x00080000)
+#define SAI_SLOTACTIVE_4             ((uint32_t)0x00100000)
+#define SAI_SLOTACTIVE_5             ((uint32_t)0x00200000)
+#define SAI_SLOTACTIVE_6             ((uint32_t)0x00400000)
+#define SAI_SLOTACTIVE_7             ((uint32_t)0x00800000)
+#define SAI_SLOTACTIVE_8             ((uint32_t)0x01000000)
+#define SAI_SLOTACTIVE_9             ((uint32_t)0x02000000)
+#define SAI_SLOTACTIVE_10            ((uint32_t)0x04000000)
+#define SAI_SLOTACTIVE_11            ((uint32_t)0x08000000)
+#define SAI_SLOTACTIVE_12            ((uint32_t)0x10000000)
+#define SAI_SLOTACTIVE_13            ((uint32_t)0x20000000)
+#define SAI_SLOTACTIVE_14            ((uint32_t)0x40000000)
+#define SAI_SLOTACTIVE_15            ((uint32_t)0x80000000)
+#define SAI_SLOTACTIVE_ALL           ((uint32_t)0xFFFF0000)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Mono_Stereo_Mode SAI Mono Stereo Mode
+  * @{
+  */
+#define SAI_STEREOMODE                    ((uint32_t)0x00000000)
+#define SAI_MONOMODE                      ((uint32_t)SAI_xCR1_MONO)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_TRIState_Management SAI TRIState Management
+  * @{
+  */
+#define SAI_OUTPUT_NOTRELEASED              ((uint32_t)0x00000000)
+#define SAI_OUTPUT_RELEASED                 ((uint32_t)SAI_xCR2_TRIS)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Fifo_Threshold SAI Block Fifo Threshold
+  * @{
+  */
+#define SAI_FIFOTHRESHOLD_EMPTY  ((uint32_t)0x00000000)
+#define SAI_FIFOTHRESHOLD_1QF    ((uint32_t)SAI_xCR2_FTH_0)
+#define SAI_FIFOTHRESHOLD_HF     ((uint32_t)SAI_xCR2_FTH_1)
+#define SAI_FIFOTHRESHOLD_3QF    ((uint32_t)(SAI_xCR2_FTH_1 | SAI_xCR2_FTH_0))
+#define SAI_FIFOTHRESHOLD_FULL   ((uint32_t)SAI_xCR2_FTH_2)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Companding_Mode SAI Block Companding Mode
+  * @{
+  */
+#define SAI_NOCOMPANDING                  ((uint32_t)0x00000000)
+#define SAI_ULAW_1CPL_COMPANDING          ((uint32_t)SAI_xCR2_COMP_1)
+#define SAI_ALAW_1CPL_COMPANDING          ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0))
+#define SAI_ULAW_2CPL_COMPANDING          ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_CPL))
+#define SAI_ALAW_2CPL_COMPANDING          ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0 | SAI_xCR2_CPL))
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Mute_Value SAI Block Mute Value
+  * @{
+  */
+#define SAI_ZERO_VALUE                     ((uint32_t)0x00000000)
+#define SAI_LAST_SENT_VALUE                 ((uint32_t)SAI_xCR2_MUTEVAL)
+
+/**
+  * @}
+  */
+
+
+/** @defgroup SAI_Block_Interrupts_Definition SAI Block Interrupts Definition
+  * @{
+  */
+#define SAI_IT_OVRUDR                     ((uint32_t)SAI_xIMR_OVRUDRIE)
+#define SAI_IT_MUTEDET                    ((uint32_t)SAI_xIMR_MUTEDETIE)
+#define SAI_IT_WCKCFG                     ((uint32_t)SAI_xIMR_WCKCFGIE)
+#define SAI_IT_FREQ                       ((uint32_t)SAI_xIMR_FREQIE)
+#define SAI_IT_CNRDY                      ((uint32_t)SAI_xIMR_CNRDYIE)
+#define SAI_IT_AFSDET                     ((uint32_t)SAI_xIMR_AFSDETIE)
+#define SAI_IT_LFSDET                     ((uint32_t)SAI_xIMR_LFSDETIE)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Flags_Definition  SAI Block Flags Definition
+  * @{
+  */
+#define SAI_FLAG_OVRUDR                   ((uint32_t)SAI_xSR_OVRUDR)
+#define SAI_FLAG_MUTEDET                  ((uint32_t)SAI_xSR_MUTEDET)
+#define SAI_FLAG_WCKCFG                   ((uint32_t)SAI_xSR_WCKCFG)
+#define SAI_FLAG_FREQ                     ((uint32_t)SAI_xSR_FREQ)
+#define SAI_FLAG_CNRDY                    ((uint32_t)SAI_xSR_CNRDY)
+#define SAI_FLAG_AFSDET                   ((uint32_t)SAI_xSR_AFSDET)
+#define SAI_FLAG_LFSDET                   ((uint32_t)SAI_xSR_LFSDET)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Fifo_Status_Level   SAI Block Fifo Status Level
+  * @{
+  */
+#define SAI_FIFOSTATUS_EMPTY              ((uint32_t)0x00000000)
+#define SAI_FIFOSTATUS_LESS1QUARTERFULL   ((uint32_t)0x00010000)
+#define SAI_FIFOSTATUS_1QUARTERFULL       ((uint32_t)0x00020000)
+#define SAI_FIFOSTATUS_HALFFULL           ((uint32_t)0x00030000)
+#define SAI_FIFOSTATUS_3QUARTERFULL       ((uint32_t)0x00040000)
+#define SAI_FIFOSTATUS_FULL               ((uint32_t)0x00050000)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Macros SAI Exported Macros
+ *  @brief macros to handle interrupts and specific configurations
+ * @{
+ */
+
+/** @brief Reset SAI handle state
+  * @param  __HANDLE__: specifies the SAI Handle.
+  * @retval None
+  */
+#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SAI_STATE_RESET)
+
+/** @brief  Enable or disable the specified SAI interrupts.
+  * @param  __HANDLE__: specifies the SAI Handle.
+  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
+  *         This parameter can be one of the following values:
+  *            @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable
+  *            @arg SAI_IT_MUTEDET: Mute detection interrupt enable
+  *            @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable
+  *            @arg SAI_IT_FREQ: FIFO request interrupt enable
+  *            @arg SAI_IT_CNRDY: Codec not ready interrupt enable
+  *            @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable
+  *            @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enabl
+  * @retval None
+  */
+
+#define __HAL_SAI_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SAI_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->IMR &= (~(__INTERRUPT__)))
+
+/** @brief  Check if the specified SAI interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the SAI Handle.
+  *         This parameter can be SAI where x: 1, 2, or 3 to select the SAI peripheral.
+  * @param  __INTERRUPT__: specifies the SAI interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg SAI_IT_TXE: Tx buffer empty interrupt enable.
+  *            @arg SAI_IT_RXNE: Rx buffer not empty interrupt enable.
+  *            @arg SAI_IT_ERR: Error interrupt enable.
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_SAI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Check whether the specified SAI flag is set or not.
+  * @param  __HANDLE__: specifies the SAI Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg SAI_FLAG_OVRUDR: Overrun underrun flag.
+  *            @arg SAI_FLAG_MUTEDET: Mute detection flag.
+  *            @arg SAI_FLAG_WCKCFG: Wrong Clock Configuration flag.
+  *            @arg SAI_FLAG_FREQ: FIFO request flag.
+  *            @arg SAI_FLAG_CNRDY: Codec not ready flag.
+  *            @arg SAI_FLAG_AFSDET: Anticipated frame synchronization detection flag.
+  *            @arg SAI_FLAG_LFSDET: Late frame synchronization detection flag.
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_SAI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clears the specified SAI pending flag.
+  * @param  __HANDLE__: specifies the SAI Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg SAI_FLAG_OVRUDR: Clear Overrun underrun
+  *            @arg SAI_FLAG_MUTEDET: Clear Mute detection
+  *            @arg SAI_FLAG_WCKCFG: Clear Wrong Clock Configuration
+  *            @arg SAI_FLAG_FREQ: Clear FIFO request
+  *            @arg SAI_FLAG_CNRDY: Clear Codec not ready
+  *            @arg SAI_FLAG_AFSDET: Clear Anticipated frame synchronization detection
+  *            @arg SAI_FLAG_LFSDET: Clear Late frame synchronization detection
+  *
+  * @retval None
+  */
+#define __HAL_SAI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR = (__FLAG__))
+
+#define __HAL_SAI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |=  SAI_xCR1_SAIEN)
+#define __HAL_SAI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &=  ~SAI_xCR1_SAIEN)
+
+ /**
+  * @}
+  */
+
+/* Include RCC SAI Extension module */
+#include "stm32f4xx_hal_sai_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SAI_Exported_Functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  **********************************/
+/** @addtogroup SAI_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
+HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DeInit (SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai);
+
+/**
+  * @}
+  */
+
+/* I/O operation functions  *****************************************************/
+/** @addtogroup SAI_Exported_Functions_Group2
+  * @{
+  */
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai);
+
+/* Abort function */
+HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai);
+
+/* Mute management */
+HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val);
+HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter);
+HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai);
+
+/* SAI IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai);
+/**
+  * @}
+  */
+
+/** @addtogroup SAI_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  **************************************************/
+HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai);
+uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup SAI_Private_Types SAI Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup SAI_Private_Variables SAI Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SAI_Private_Constants SAI Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup SAI_Private_Macros
+  * @{
+  */
+#define IS_SAI_BLOCK_SYNCEXT(STATE)   (((STATE) == SAI_SYNCEXT_DISABLE)           ||\
+                                       ((STATE) == SAI_SYNCEXT_IN_ENABLE)         ||\
+                                       ((STATE) == SAI_SYNCEXT_OUTBLOCKA_ENABLE)  ||\
+                                       ((STATE) == SAI_SYNCEXT_OUTBLOCKB_ENABLE))
+
+#define IS_SAI_SUPPORTED_PROTOCOL(PROTOCOL)   (((PROTOCOL) == SAI_I2S_STANDARD)     ||\
+                                               ((PROTOCOL) == SAI_I2S_MSBJUSTIFIED) ||\
+                                               ((PROTOCOL) == SAI_I2S_LSBJUSTIFIED) ||\
+                                               ((PROTOCOL) == SAI_PCM_LONG)         ||\
+                                               ((PROTOCOL) == SAI_PCM_SHORT))
+
+#define IS_SAI_PROTOCOL_DATASIZE(DATASIZE)   (((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BIT)         ||\
+                                              ((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BITEXTENDED) ||\
+                                              ((DATASIZE) == SAI_PROTOCOL_DATASIZE_24BIT)         ||\
+                                              ((DATASIZE) == SAI_PROTOCOL_DATASIZE_32BIT))
+
+#define IS_SAI_CLK_SOURCE(SOURCE) (((SOURCE) == SAI_CLKSOURCE_PLLSAI) ||\
+                                   ((SOURCE) == SAI_CLKSOURCE_PLLI2S) ||\
+                                   ((SOURCE) == SAI_CLKSOURCE_EXT))
+
+#define IS_SAI_AUDIO_FREQUENCY(AUDIO) (((AUDIO) == SAI_AUDIO_FREQUENCY_192K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_96K) || \
+                                       ((AUDIO) == SAI_AUDIO_FREQUENCY_48K)  || ((AUDIO) == SAI_AUDIO_FREQUENCY_44K) || \
+                                       ((AUDIO) == SAI_AUDIO_FREQUENCY_32K)  || ((AUDIO) == SAI_AUDIO_FREQUENCY_22K) || \
+                                       ((AUDIO) == SAI_AUDIO_FREQUENCY_16K)  || ((AUDIO) == SAI_AUDIO_FREQUENCY_11K) || \
+                                       ((AUDIO) == SAI_AUDIO_FREQUENCY_8K)   || ((AUDIO) == SAI_AUDIO_FREQUENCY_MCKDIV))
+
+#define IS_SAI_BLOCK_MODE(MODE)    (((MODE) == SAI_MODEMASTER_TX) || \
+                                    ((MODE) == SAI_MODEMASTER_RX) || \
+                                    ((MODE) == SAI_MODESLAVE_TX)  || \
+                                    ((MODE) == SAI_MODESLAVE_RX))
+
+#define IS_SAI_BLOCK_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_FREE_PROTOCOL)  || \
+                                         ((PROTOCOL) == SAI_AC97_PROTOCOL)  || \
+                                         ((PROTOCOL) == SAI_SPDIF_PROTOCOL))
+
+#define IS_SAI_BLOCK_DATASIZE(DATASIZE) (((DATASIZE) == SAI_DATASIZE_8)  || \
+                                         ((DATASIZE) == SAI_DATASIZE_10) || \
+                                         ((DATASIZE) == SAI_DATASIZE_16) || \
+                                         ((DATASIZE) == SAI_DATASIZE_20) || \
+                                         ((DATASIZE) == SAI_DATASIZE_24) || \
+                                         ((DATASIZE) == SAI_DATASIZE_32))
+
+#define IS_SAI_BLOCK_FIRST_BIT(BIT) (((BIT) == SAI_FIRSTBIT_MSB) || \
+                                     ((BIT) == SAI_FIRSTBIT_LSB))
+
+#define IS_SAI_BLOCK_CLOCK_STROBING(CLOCK) (((CLOCK) == SAI_CLOCKSTROBING_FALLINGEDGE) || \
+                                            ((CLOCK) == SAI_CLOCKSTROBING_RISINGEDGE))
+
+#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \
+                                       ((SYNCHRO) == SAI_SYNCHRONOUS)  || \
+                                       ((SYNCHRO) == SAI_SYNCHRONOUS_EXT))
+
+#define IS_SAI_BLOCK_OUTPUT_DRIVE(DRIVE) (((DRIVE) == SAI_OUTPUTDRIVE_DISABLE) || \
+                                          ((DRIVE) == SAI_OUTPUTDRIVE_ENABLE))
+
+#define IS_SAI_BLOCK_NODIVIDER(NODIVIDER) (((NODIVIDER) == SAI_MASTERDIVIDER_ENABLE) || \
+                                           ((NODIVIDER) == SAI_MASTERDIVIDER_DISABLE))
+
+#define IS_SAI_BLOCK_FIFO_STATUS(STATUS) (((STATUS) == SAI_FIFOSTATUS_LESS1QUARTERFULL ) || \
+                                          ((STATUS) == SAI_FIFOSTATUS_HALFFULL)          || \
+                                          ((STATUS) == SAI_FIFOSTATUS_1QUARTERFULL)      || \
+                                          ((STATUS) == SAI_FIFOSTATUS_3QUARTERFULL)     || \
+                                          ((STATUS) == SAI_FIFOSTATUS_FULL)              || \
+                                          ((STATUS) == SAI_FIFOSTATUS_EMPTY))
+
+#define IS_SAI_BLOCK_MUTE_COUNTER(COUNTER) ((COUNTER) <= 63)
+
+#define IS_SAI_BLOCK_MUTE_VALUE(VALUE)    (((VALUE) == SAI_ZERO_VALUE)     || \
+                                           ((VALUE) == SAI_LAST_SENT_VALUE))
+
+#define IS_SAI_BLOCK_COMPANDING_MODE(MODE)    (((MODE) == SAI_NOCOMPANDING)         || \
+                                               ((MODE) == SAI_ULAW_1CPL_COMPANDING) || \
+                                               ((MODE) == SAI_ALAW_1CPL_COMPANDING) || \
+                                               ((MODE) == SAI_ULAW_2CPL_COMPANDING) || \
+                                               ((MODE) == SAI_ALAW_2CPL_COMPANDING))
+
+#define IS_SAI_BLOCK_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SAI_FIFOTHRESHOLD_EMPTY)   || \
+                                                ((THRESHOLD) == SAI_FIFOTHRESHOLD_1QF)     || \
+                                                ((THRESHOLD) == SAI_FIFOTHRESHOLD_HF)      || \
+                                                ((THRESHOLD) == SAI_FIFOTHRESHOLD_3QF)     || \
+                                                ((THRESHOLD) == SAI_FIFOTHRESHOLD_FULL))
+
+#define IS_SAI_BLOCK_TRISTATE_MANAGEMENT(STATE) (((STATE) == SAI_OUTPUT_NOTRELEASED) ||\
+                                                 ((STATE) == SAI_OUTPUT_RELEASED))
+
+#define IS_SAI_MONO_STEREO_MODE(MODE) (((MODE) == SAI_MONOMODE) ||\
+                                       ((MODE) == SAI_STEREOMODE))
+
+#define IS_SAI_SLOT_ACTIVE(ACTIVE)  ((((ACTIVE) >> 16 )  > 0) && (((ACTIVE) >> 16 )  <= (SAI_SLOTACTIVE_ALL >> 16)))
+
+#define IS_SAI_BLOCK_SLOT_NUMBER(NUMBER) ((1 <= (NUMBER)) && ((NUMBER) <= 16))
+
+#define IS_SAI_BLOCK_SLOT_SIZE(SIZE) (((SIZE) == SAI_SLOTSIZE_DATASIZE) || \
+                                      ((SIZE) == SAI_SLOTSIZE_16B)      || \
+                                      ((SIZE) == SAI_SLOTSIZE_32B))
+
+#define IS_SAI_BLOCK_FIRSTBIT_OFFSET(OFFSET) ((OFFSET) <= 24)
+
+#define IS_SAI_BLOCK_FS_OFFSET(OFFSET) (((OFFSET) == SAI_FS_FIRSTBIT) || \
+                                        ((OFFSET) == SAI_FS_BEFOREFIRSTBIT))
+
+#define IS_SAI_BLOCK_FS_POLARITY(POLARITY) (((POLARITY) == SAI_FS_ACTIVE_LOW) || \
+                                            ((POLARITY) == SAI_FS_ACTIVE_HIGH))
+
+#define IS_SAI_BLOCK_FS_DEFINITION(DEFINITION) (((DEFINITION) == SAI_FS_STARTFRAME) || \
+                                                ((DEFINITION) == SAI_FS_CHANNEL_IDENTIFICATION))
+
+#define IS_SAI_BLOCK_MASTER_DIVIDER(DIVIDER) ((DIVIDER) <= 15)
+
+#define IS_SAI_BLOCK_FRAME_LENGTH(LENGTH) ((8 <= (LENGTH)) && ((LENGTH) <= 256))
+
+#define IS_SAI_BLOCK_ACTIVE_FRAME(LENGTH) ((1 <= (LENGTH)) && ((LENGTH) <= 128))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SAI_Private_Functions SAI Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SAI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai_ex.h
new file mode 100644
index 0000000..0fd2fa8
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai_ex.h
@@ -0,0 +1,101 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_sai_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of SAI Extension HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SAI_EX_H
+#define __STM32F4xx_HAL_SAI_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SAIEx
+  * @{
+  */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SAIEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup SAIEx_Exported_Functions_Group1
+  * @{
+  */
+
+/* Extended features functions ************************************************/
+void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai);
+uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SAI_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h
new file mode 100644
index 0000000..61a406e
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h
@@ -0,0 +1,789 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_sd.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of SD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SD_H
+#define __STM32F4xx_HAL_SD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_sdmmc.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SD SD
+  * @brief SD HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SD_Exported_Types SD Exported Types
+  * @{
+  */
+
+/** @defgroup SD_Exported_Types_Group1 SD Handle Structure definition
+  * @{
+  */
+#define SD_InitTypeDef      SDIO_InitTypeDef
+#define SD_TypeDef          SDIO_TypeDef
+
+typedef struct
+{
+  SD_TypeDef                   *Instance;        /*!< SDIO register base address                     */
+
+  SD_InitTypeDef               Init;             /*!< SD required parameters                         */
+
+  HAL_LockTypeDef              Lock;             /*!< SD locking object                              */
+
+  uint32_t                     CardType;         /*!< SD card type                                   */
+
+  uint32_t                     RCA;              /*!< SD relative card address                       */
+
+  uint32_t                     CSD[4];           /*!< SD card specific data table                    */
+
+  uint32_t                     CID[4];           /*!< SD card identification number table            */
+
+  __IO uint32_t                SdTransferCplt;   /*!< SD transfer complete flag in non blocking mode */
+
+  __IO uint32_t                SdTransferErr;    /*!< SD transfer error flag in non blocking mode    */
+
+  __IO uint32_t                DmaTransferCplt;  /*!< SD DMA transfer complete flag                  */
+
+  __IO uint32_t                SdOperation;      /*!< SD transfer operation (read/write)             */
+
+  DMA_HandleTypeDef            *hdmarx;          /*!< SD Rx DMA handle parameters                    */
+
+  DMA_HandleTypeDef            *hdmatx;          /*!< SD Tx DMA handle parameters                    */
+
+}SD_HandleTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group2 Card Specific Data: CSD Register
+  * @{
+  */
+typedef struct
+{
+  __IO uint8_t  CSDStruct;            /*!< CSD structure                         */
+  __IO uint8_t  SysSpecVersion;       /*!< System specification version          */
+  __IO uint8_t  Reserved1;            /*!< Reserved                              */
+  __IO uint8_t  TAAC;                 /*!< Data read access time 1               */
+  __IO uint8_t  NSAC;                 /*!< Data read access time 2 in CLK cycles */
+  __IO uint8_t  MaxBusClkFrec;        /*!< Max. bus clock frequency              */
+  __IO uint16_t CardComdClasses;      /*!< Card command classes                  */
+  __IO uint8_t  RdBlockLen;           /*!< Max. read data block length           */
+  __IO uint8_t  PartBlockRead;        /*!< Partial blocks for read allowed       */
+  __IO uint8_t  WrBlockMisalign;      /*!< Write block misalignment              */
+  __IO uint8_t  RdBlockMisalign;      /*!< Read block misalignment               */
+  __IO uint8_t  DSRImpl;              /*!< DSR implemented                       */
+  __IO uint8_t  Reserved2;            /*!< Reserved                              */
+  __IO uint32_t DeviceSize;           /*!< Device Size                           */
+  __IO uint8_t  MaxRdCurrentVDDMin;   /*!< Max. read current @ VDD min           */
+  __IO uint8_t  MaxRdCurrentVDDMax;   /*!< Max. read current @ VDD max           */
+  __IO uint8_t  MaxWrCurrentVDDMin;   /*!< Max. write current @ VDD min          */
+  __IO uint8_t  MaxWrCurrentVDDMax;   /*!< Max. write current @ VDD max          */
+  __IO uint8_t  DeviceSizeMul;        /*!< Device size multiplier                */
+  __IO uint8_t  EraseGrSize;          /*!< Erase group size                      */
+  __IO uint8_t  EraseGrMul;           /*!< Erase group size multiplier           */
+  __IO uint8_t  WrProtectGrSize;      /*!< Write protect group size              */
+  __IO uint8_t  WrProtectGrEnable;    /*!< Write protect group enable            */
+  __IO uint8_t  ManDeflECC;           /*!< Manufacturer default ECC              */
+  __IO uint8_t  WrSpeedFact;          /*!< Write speed factor                    */
+  __IO uint8_t  MaxWrBlockLen;        /*!< Max. write data block length          */
+  __IO uint8_t  WriteBlockPaPartial;  /*!< Partial blocks for write allowed      */
+  __IO uint8_t  Reserved3;            /*!< Reserved                              */
+  __IO uint8_t  ContentProtectAppli;  /*!< Content protection application        */
+  __IO uint8_t  FileFormatGrouop;     /*!< File format group                     */
+  __IO uint8_t  CopyFlag;             /*!< Copy flag (OTP)                       */
+  __IO uint8_t  PermWrProtect;        /*!< Permanent write protection            */
+  __IO uint8_t  TempWrProtect;        /*!< Temporary write protection            */
+  __IO uint8_t  FileFormat;           /*!< File format                           */
+  __IO uint8_t  ECC;                  /*!< ECC code                              */
+  __IO uint8_t  CSD_CRC;              /*!< CSD CRC                               */
+  __IO uint8_t  Reserved4;            /*!< Always 1                              */
+
+}HAL_SD_CSDTypedef;
+/**
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group3 Card Identification Data: CID Register
+  * @{
+  */
+typedef struct
+{
+  __IO uint8_t  ManufacturerID;  /*!< Manufacturer ID       */
+  __IO uint16_t OEM_AppliID;     /*!< OEM/Application ID    */
+  __IO uint32_t ProdName1;       /*!< Product Name part1    */
+  __IO uint8_t  ProdName2;       /*!< Product Name part2    */
+  __IO uint8_t  ProdRev;         /*!< Product Revision      */
+  __IO uint32_t ProdSN;          /*!< Product Serial Number */
+  __IO uint8_t  Reserved1;       /*!< Reserved1             */
+  __IO uint16_t ManufactDate;    /*!< Manufacturing Date    */
+  __IO uint8_t  CID_CRC;         /*!< CID CRC               */
+  __IO uint8_t  Reserved2;       /*!< Always 1              */
+
+}HAL_SD_CIDTypedef;
+/**
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group4 SD Card Status returned by ACMD13
+  * @{
+  */
+typedef struct
+{
+  __IO uint8_t  DAT_BUS_WIDTH;           /*!< Shows the currently defined data bus width                 */
+  __IO uint8_t  SECURED_MODE;            /*!< Card is in secured mode of operation                       */
+  __IO uint16_t SD_CARD_TYPE;            /*!< Carries information about card type                        */
+  __IO uint32_t SIZE_OF_PROTECTED_AREA;  /*!< Carries information about the capacity of protected area   */
+  __IO uint8_t  SPEED_CLASS;             /*!< Carries information about the speed class of the card      */
+  __IO uint8_t  PERFORMANCE_MOVE;        /*!< Carries information about the card's performance move      */
+  __IO uint8_t  AU_SIZE;                 /*!< Carries information about the card's allocation unit size  */
+  __IO uint16_t ERASE_SIZE;              /*!< Determines the number of AUs to be erased in one operation */
+  __IO uint8_t  ERASE_TIMEOUT;           /*!< Determines the timeout for any number of AU erase          */
+  __IO uint8_t  ERASE_OFFSET;            /*!< Carries information about the erase offset                 */
+
+}HAL_SD_CardStatusTypedef;
+/**
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group5 SD Card information structure
+  * @{
+  */
+typedef struct
+{
+  HAL_SD_CSDTypedef   SD_csd;         /*!< SD card specific data register         */
+  HAL_SD_CIDTypedef   SD_cid;         /*!< SD card identification number register */
+  uint64_t            CardCapacity;   /*!< Card capacity                          */
+  uint32_t            CardBlockSize;  /*!< Card block size                        */
+  uint16_t            RCA;            /*!< SD relative card address               */
+  uint8_t             CardType;       /*!< SD card type                           */
+
+}HAL_SD_CardInfoTypedef;
+/**
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group6 SD Error status enumeration Structure definition
+  * @{
+  */
+typedef enum
+{
+/**
+  * @brief  SD specific error defines
+  */
+  SD_CMD_CRC_FAIL                    = (1),   /*!< Command response received (but CRC check failed)              */
+  SD_DATA_CRC_FAIL                   = (2),   /*!< Data block sent/received (CRC check failed)                   */
+  SD_CMD_RSP_TIMEOUT                 = (3),   /*!< Command response timeout                                      */
+  SD_DATA_TIMEOUT                    = (4),   /*!< Data timeout                                                  */
+  SD_TX_UNDERRUN                     = (5),   /*!< Transmit FIFO underrun                                        */
+  SD_RX_OVERRUN                      = (6),   /*!< Receive FIFO overrun                                          */
+  SD_START_BIT_ERR                   = (7),   /*!< Start bit not detected on all data signals in wide bus mode   */
+  SD_CMD_OUT_OF_RANGE                = (8),   /*!< Command's argument was out of range.                          */
+  SD_ADDR_MISALIGNED                 = (9),   /*!< Misaligned address                                            */
+  SD_BLOCK_LEN_ERR                   = (10),  /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
+  SD_ERASE_SEQ_ERR                   = (11),  /*!< An error in the sequence of erase command occurs.            */
+  SD_BAD_ERASE_PARAM                 = (12),  /*!< An invalid selection for erase groups                        */
+  SD_WRITE_PROT_VIOLATION            = (13),  /*!< Attempt to program a write protect block                     */
+  SD_LOCK_UNLOCK_FAILED              = (14),  /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
+  SD_COM_CRC_FAILED                  = (15),  /*!< CRC check of the previous command failed                     */
+  SD_ILLEGAL_CMD                     = (16),  /*!< Command is not legal for the card state                      */
+  SD_CARD_ECC_FAILED                 = (17),  /*!< Card internal ECC was applied but failed to correct the data */
+  SD_CC_ERROR                        = (18),  /*!< Internal card controller error                               */
+  SD_GENERAL_UNKNOWN_ERROR           = (19),  /*!< General or unknown error                                     */
+  SD_STREAM_READ_UNDERRUN            = (20),  /*!< The card could not sustain data transfer in stream read operation. */
+  SD_STREAM_WRITE_OVERRUN            = (21),  /*!< The card could not sustain data programming in stream mode   */
+  SD_CID_CSD_OVERWRITE               = (22),  /*!< CID/CSD overwrite error                                      */
+  SD_WP_ERASE_SKIP                   = (23),  /*!< Only partial address space was erased                        */
+  SD_CARD_ECC_DISABLED               = (24),  /*!< Command has been executed without using internal ECC         */
+  SD_ERASE_RESET                     = (25),  /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */
+  SD_AKE_SEQ_ERROR                   = (26),  /*!< Error in sequence of authentication.                         */
+  SD_INVALID_VOLTRANGE               = (27),
+  SD_ADDR_OUT_OF_RANGE               = (28),
+  SD_SWITCH_ERROR                    = (29),
+  SD_SDIO_DISABLED                   = (30),
+  SD_SDIO_FUNCTION_BUSY              = (31),
+  SD_SDIO_FUNCTION_FAILED            = (32),
+  SD_SDIO_UNKNOWN_FUNCTION           = (33),
+
+/**
+  * @brief  Standard error defines
+  */
+  SD_INTERNAL_ERROR                  = (34),
+  SD_NOT_CONFIGURED                  = (35),
+  SD_REQUEST_PENDING                 = (36),
+  SD_REQUEST_NOT_APPLICABLE          = (37),
+  SD_INVALID_PARAMETER               = (38),
+  SD_UNSUPPORTED_FEATURE             = (39),
+  SD_UNSUPPORTED_HW                  = (40),
+  SD_ERROR                           = (41),
+  SD_OK                              = (0)
+
+}HAL_SD_ErrorTypedef;
+/**
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group7 SD Transfer state enumeration structure
+  * @{
+  */
+typedef enum
+{
+  SD_TRANSFER_OK    = 0,  /*!< Transfer success      */
+  SD_TRANSFER_BUSY  = 1,  /*!< Transfer is occurring */
+  SD_TRANSFER_ERROR = 2   /*!< Transfer failed       */
+
+}HAL_SD_TransferStateTypedef;
+/**
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group8 SD Card State enumeration structure
+  * @{
+  */
+typedef enum
+{
+  SD_CARD_READY                  = ((uint32_t)0x00000001),  /*!< Card state is ready                     */
+  SD_CARD_IDENTIFICATION         = ((uint32_t)0x00000002),  /*!< Card is in identification state         */
+  SD_CARD_STANDBY                = ((uint32_t)0x00000003),  /*!< Card is in standby state                */
+  SD_CARD_TRANSFER               = ((uint32_t)0x00000004),  /*!< Card is in transfer state               */
+  SD_CARD_SENDING                = ((uint32_t)0x00000005),  /*!< Card is sending an operation            */
+  SD_CARD_RECEIVING              = ((uint32_t)0x00000006),  /*!< Card is receiving operation information */
+  SD_CARD_PROGRAMMING            = ((uint32_t)0x00000007),  /*!< Card is in programming state            */
+  SD_CARD_DISCONNECTED           = ((uint32_t)0x00000008),  /*!< Card is disconnected                    */
+  SD_CARD_ERROR                  = ((uint32_t)0x000000FF)   /*!< Card is in error state                  */
+
+}HAL_SD_CardStateTypedef;
+/**
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group9 SD Operation enumeration structure
+  * @{
+  */
+typedef enum
+{
+  SD_READ_SINGLE_BLOCK    = 0,  /*!< Read single block operation      */
+  SD_READ_MULTIPLE_BLOCK  = 1,  /*!< Read multiple blocks operation   */
+  SD_WRITE_SINGLE_BLOCK   = 2,  /*!< Write single block operation     */
+  SD_WRITE_MULTIPLE_BLOCK = 3   /*!< Write multiple blocks operation  */
+
+}HAL_SD_OperationTypedef;
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SD_Exported_Constants SD Exported Constants
+  * @{
+  */
+
+/**
+  * @brief SD Commands Index
+  */
+#define SD_CMD_GO_IDLE_STATE                       ((uint8_t)0)   /*!< Resets the SD memory card.                                                               */
+#define SD_CMD_SEND_OP_COND                        ((uint8_t)1)   /*!< Sends host capacity support information and activates the card's initialization process. */
+#define SD_CMD_ALL_SEND_CID                        ((uint8_t)2)   /*!< Asks any card connected to the host to send the CID numbers on the CMD line.             */
+#define SD_CMD_SET_REL_ADDR                        ((uint8_t)3)   /*!< Asks the card to publish a new relative address (RCA).                                   */
+#define SD_CMD_SET_DSR                             ((uint8_t)4)   /*!< Programs the DSR of all cards.                                                           */
+#define SD_CMD_SDIO_SEN_OP_COND                    ((uint8_t)5)   /*!< Sends host capacity support information (HCS) and asks the accessed card to send its
+                                                                       operating condition register (OCR) content in the response on the CMD line.              */
+#define SD_CMD_HS_SWITCH                           ((uint8_t)6)   /*!< Checks switchable function (mode 0) and switch card function (mode 1).                   */
+#define SD_CMD_SEL_DESEL_CARD                      ((uint8_t)7)   /*!< Selects the card by its own relative address and gets deselected by any other address    */
+#define SD_CMD_HS_SEND_EXT_CSD                     ((uint8_t)8)   /*!< Sends SD Memory Card interface condition, which includes host supply voltage information
+                                                                       and asks the card whether card supports voltage.                                         */
+#define SD_CMD_SEND_CSD                            ((uint8_t)9)   /*!< Addressed card sends its card specific data (CSD) on the CMD line.                       */
+#define SD_CMD_SEND_CID                            ((uint8_t)10)  /*!< Addressed card sends its card identification (CID) on the CMD line.                      */
+#define SD_CMD_READ_DAT_UNTIL_STOP                 ((uint8_t)11)  /*!< SD card doesn't support it.                                                              */
+#define SD_CMD_STOP_TRANSMISSION                   ((uint8_t)12)  /*!< Forces the card to stop transmission.                                                    */
+#define SD_CMD_SEND_STATUS                         ((uint8_t)13)  /*!< Addressed card sends its status register.                                                */
+#define SD_CMD_HS_BUSTEST_READ                     ((uint8_t)14)
+#define SD_CMD_GO_INACTIVE_STATE                   ((uint8_t)15)  /*!< Sends an addressed card into the inactive state.                                         */
+#define SD_CMD_SET_BLOCKLEN                        ((uint8_t)16)  /*!< Sets the block length (in bytes for SDSC) for all following block commands
+                                                                       (read, write, lock). Default block length is fixed to 512 Bytes. Not effective
+                                                                       for SDHS and SDXC.                                                                       */
+#define SD_CMD_READ_SINGLE_BLOCK                   ((uint8_t)17)  /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+                                                                       fixed 512 bytes in case of SDHC and SDXC.                                                */
+#define SD_CMD_READ_MULT_BLOCK                     ((uint8_t)18)  /*!< Continuously transfers data blocks from card to host until interrupted by
+                                                                       STOP_TRANSMISSION command.                                                               */
+#define SD_CMD_HS_BUSTEST_WRITE                    ((uint8_t)19)  /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104.                                    */
+#define SD_CMD_WRITE_DAT_UNTIL_STOP                ((uint8_t)20)  /*!< Speed class control command.                                                             */
+#define SD_CMD_SET_BLOCK_COUNT                     ((uint8_t)23)  /*!< Specify block count for CMD18 and CMD25.                                                 */
+#define SD_CMD_WRITE_SINGLE_BLOCK                  ((uint8_t)24)  /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+                                                                       fixed 512 bytes in case of SDHC and SDXC.                                                */
+#define SD_CMD_WRITE_MULT_BLOCK                    ((uint8_t)25)  /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows.                    */
+#define SD_CMD_PROG_CID                            ((uint8_t)26)  /*!< Reserved for manufacturers.                                                              */
+#define SD_CMD_PROG_CSD                            ((uint8_t)27)  /*!< Programming of the programmable bits of the CSD.                                         */
+#define SD_CMD_SET_WRITE_PROT                      ((uint8_t)28)  /*!< Sets the write protection bit of the addressed group.                                    */
+#define SD_CMD_CLR_WRITE_PROT                      ((uint8_t)29)  /*!< Clears the write protection bit of the addressed group.                                  */
+#define SD_CMD_SEND_WRITE_PROT                     ((uint8_t)30)  /*!< Asks the card to send the status of the write protection bits.                           */
+#define SD_CMD_SD_ERASE_GRP_START                  ((uint8_t)32)  /*!< Sets the address of the first write block to be erased. (For SD card only).              */
+#define SD_CMD_SD_ERASE_GRP_END                    ((uint8_t)33)  /*!< Sets the address of the last write block of the continuous range to be erased.           */
+#define SD_CMD_ERASE_GRP_START                     ((uint8_t)35)  /*!< Sets the address of the first write block to be erased. Reserved for each command
+                                                                       system set by switch function command (CMD6).                                            */
+#define SD_CMD_ERASE_GRP_END                       ((uint8_t)36)  /*!< Sets the address of the last write block of the continuous range to be erased.
+                                                                       Reserved for each command system set by switch function command (CMD6).                  */
+#define SD_CMD_ERASE                               ((uint8_t)38)  /*!< Reserved for SD security applications.                                                   */
+#define SD_CMD_FAST_IO                             ((uint8_t)39)  /*!< SD card doesn't support it (Reserved).                                                   */
+#define SD_CMD_GO_IRQ_STATE                        ((uint8_t)40)  /*!< SD card doesn't support it (Reserved).                                                   */
+#define SD_CMD_LOCK_UNLOCK                         ((uint8_t)42)  /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by
+                                                                       the SET_BLOCK_LEN command.                                                               */
+#define SD_CMD_APP_CMD                             ((uint8_t)55)  /*!< Indicates to the card that the next command is an application specific command rather
+                                                                       than a standard command.                                                                 */
+#define SD_CMD_GEN_CMD                             ((uint8_t)56)  /*!< Used either to transfer a data block to the card or to get a data block from the card
+                                                                       for general purpose/application specific commands.                                       */
+#define SD_CMD_NO_CMD                              ((uint8_t)64)
+
+/**
+  * @brief Following commands are SD Card Specific commands.
+  *        SDIO_APP_CMD should be sent before sending these commands.
+  */
+#define SD_CMD_APP_SD_SET_BUSWIDTH                 ((uint8_t)6)   /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus
+                                                                       widths are given in SCR register.                                                          */
+#define SD_CMD_SD_APP_STATUS                       ((uint8_t)13)  /*!< (ACMD13) Sends the SD status.                                                              */
+#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS        ((uint8_t)22)  /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with
+                                                                       32bit+CRC data block.                                                                      */
+#define SD_CMD_SD_APP_OP_COND                      ((uint8_t)41)  /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to
+                                                                       send its operating condition register (OCR) content in the response on the CMD line.       */
+#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT          ((uint8_t)42)  /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */
+#define SD_CMD_SD_APP_SEND_SCR                     ((uint8_t)51)  /*!< Reads the SD Configuration Register (SCR).                                                 */
+#define SD_CMD_SDIO_RW_DIRECT                      ((uint8_t)52)  /*!< For SD I/O card only, reserved for security specification.                                 */
+#define SD_CMD_SDIO_RW_EXTENDED                    ((uint8_t)53)  /*!< For SD I/O card only, reserved for security specification.                                 */
+
+/**
+  * @brief Following commands are SD Card Specific security commands.
+  *        SD_CMD_APP_CMD should be sent before sending these commands.
+  */
+#define SD_CMD_SD_APP_GET_MKB                      ((uint8_t)43)  /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_MID                      ((uint8_t)44)  /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RN1                  ((uint8_t)45)  /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RN2                  ((uint8_t)46)  /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RES2                 ((uint8_t)47)  /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RES1                 ((uint8_t)48)  /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK   ((uint8_t)18)  /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK  ((uint8_t)25)  /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_ERASE                 ((uint8_t)38)  /*!< For SD card only */
+#define SD_CMD_SD_APP_CHANGE_SECURE_AREA           ((uint8_t)49)  /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MKB             ((uint8_t)48)  /*!< For SD card only */
+
+/**
+  * @brief Supported SD Memory Cards
+  */
+#define STD_CAPACITY_SD_CARD_V1_1             ((uint32_t)0x00000000)
+#define STD_CAPACITY_SD_CARD_V2_0             ((uint32_t)0x00000001)
+#define HIGH_CAPACITY_SD_CARD                 ((uint32_t)0x00000002)
+#define MULTIMEDIA_CARD                       ((uint32_t)0x00000003)
+#define SECURE_DIGITAL_IO_CARD                ((uint32_t)0x00000004)
+#define HIGH_SPEED_MULTIMEDIA_CARD            ((uint32_t)0x00000005)
+#define SECURE_DIGITAL_IO_COMBO_CARD          ((uint32_t)0x00000006)
+#define HIGH_CAPACITY_MMC_CARD                ((uint32_t)0x00000007)
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SD_Exported_macros SD Exported Macros
+  * @brief macros to handle interrupts and specific clock configurations
+  * @{
+  */
+
+/**
+  * @brief  Enable the SD device.
+  * @retval None
+  */
+#define __HAL_SD_SDIO_ENABLE() __SDIO_ENABLE()
+
+/**
+  * @brief  Disable the SD device.
+  * @retval None
+  */
+#define __HAL_SD_SDIO_DISABLE() __SDIO_DISABLE()
+
+/**
+  * @brief  Enable the SDIO DMA transfer.
+  * @retval None
+  */
+#define __HAL_SD_SDIO_DMA_ENABLE() __SDIO_DMA_ENABLE()
+
+/**
+  * @brief  Disable the SDIO DMA transfer.
+  * @retval None
+  */
+#define __HAL_SD_SDIO_DMA_DISABLE()  __SDIO_DMA_DISABLE()
+
+/**
+  * @brief  Enable the SD device interrupt.
+  * @param  __HANDLE__: SD Handle
+  * @param  __INTERRUPT__: specifies the SDIO interrupt sources to be enabled.
+  *         This parameter can be one or a combination of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+  *                                   bus mode interrupt
+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *            @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @retval None
+  */
+#define __HAL_SD_SDIO_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @brief  Disable the SD device interrupt.
+  * @param  __HANDLE__: SD Handle
+  * @param  __INTERRUPT__: specifies the SDIO interrupt sources to be disabled.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+  *                                   bus mode interrupt
+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *            @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @retval None
+  */
+#define __HAL_SD_SDIO_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified SD flag is set or not.
+  * @param  __HANDLE__: SD Handle
+  * @param  __FLAG__: specifies the flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+  *            @arg SDIO_FLAG_DTIMEOUT: Data timeout
+  *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
+  *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
+  *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
+  *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *            @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+  *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *            @arg SDIO_FLAG_CMDACT:   Command transfer in progress
+  *            @arg SDIO_FLAG_TXACT:    Data transmit in progress
+  *            @arg SDIO_FLAG_RXACT:    Data receive in progress
+  *            @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+  *            @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+  *            @arg SDIO_FLAG_TXFIFOF:  Transmit FIFO full
+  *            @arg SDIO_FLAG_RXFIFOF:  Receive FIFO full
+  *            @arg SDIO_FLAG_TXFIFOE:  Transmit FIFO empty
+  *            @arg SDIO_FLAG_RXFIFOE:  Receive FIFO empty
+  *            @arg SDIO_FLAG_TXDAVL:   Data available in transmit FIFO
+  *            @arg SDIO_FLAG_RXDAVL:   Data available in receive FIFO
+  *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
+  *            @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval The new state of SD FLAG (SET or RESET).
+  */
+#define __HAL_SD_SDIO_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+  * @brief  Clear the SD's pending flags.
+  * @param  __HANDLE__: SD Handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+  *            @arg SDIO_FLAG_DTIMEOUT: Data timeout
+  *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
+  *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
+  *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
+  *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *            @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+  *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
+  *            @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval None
+  */
+#define __HAL_SD_SDIO_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+  * @brief  Check whether the specified SD interrupt has occurred or not.
+  * @param  __HANDLE__: SD Handle
+  * @param  __INTERRUPT__: specifies the SDIO interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+  *                                   bus mode interrupt
+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *            @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @retval The new state of SD IT (SET or RESET).
+  */
+#define __HAL_SD_SDIO_GET_IT  (__HANDLE__, __INTERRUPT__) __SDIO_GET_IT  ((__HANDLE__)->Instance, __INTERRUPT__)
+
+/**
+  * @brief  Clear the SD's interrupt pending bits.
+  * @param  __HANDLE__ : SD Handle
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+  *            @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+  *                                   bus mode interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *            @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval None
+  */
+#define __HAL_SD_SDIO_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SD_Exported_Functions SD Exported Functions
+  * @{
+  */
+
+/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo);
+HAL_StatusTypeDef   HAL_SD_DeInit (SD_HandleTypeDef *hsd);
+void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
+void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
+/**
+  * @}
+  */
+
+/** @defgroup SD_Exported_Functions_Group2 I/O operation functions
+  * @{
+  */
+/* Blocking mode: Polling */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr);
+
+/* Non-Blocking mode: Interrupt */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
+
+/* Callback in non blocking modes (DMA) */
+void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd);
+void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd);
+
+/* Non-Blocking mode: DMA */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo);
+HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode);
+HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd);
+HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+/** @defgroup SD_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
+HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus);
+HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup SD_Private_Types SD Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup SD_Private_Defines SD Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup SD_Private_Variables SD Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SD_Private_Constants SD Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SD_Private_Macros SD Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SD_Private_Functions SD Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h
new file mode 100644
index 0000000..b8f3a75
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h
@@ -0,0 +1,196 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_sdram.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of SDRAM HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SDRAM_H
+#define __STM32F4xx_HAL_SDRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_fmc.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SDRAM
+  * @{
+  */
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup SDRAM_Exported_Types SDRAM Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL SDRAM State structure definition
+  */
+typedef enum
+{
+  HAL_SDRAM_STATE_RESET             = 0x00,  /*!< SDRAM not yet initialized or disabled */
+  HAL_SDRAM_STATE_READY             = 0x01,  /*!< SDRAM initialized and ready for use   */
+  HAL_SDRAM_STATE_BUSY              = 0x02,  /*!< SDRAM internal process is ongoing     */
+  HAL_SDRAM_STATE_ERROR             = 0x03,  /*!< SDRAM error state                     */
+  HAL_SDRAM_STATE_WRITE_PROTECTED   = 0x04,  /*!< SDRAM device write protected          */
+  HAL_SDRAM_STATE_PRECHARGED        = 0x05   /*!< SDRAM device precharged               */
+
+}HAL_SDRAM_StateTypeDef;
+
+/**
+  * @brief  SDRAM handle Structure definition
+  */
+typedef struct
+{
+  FMC_SDRAM_TypeDef             *Instance;  /*!< Register base address                 */
+
+  FMC_SDRAM_InitTypeDef         Init;       /*!< SDRAM device configuration parameters */
+
+  __IO HAL_SDRAM_StateTypeDef   State;      /*!< SDRAM access state                    */
+
+  HAL_LockTypeDef               Lock;       /*!< SDRAM locking object                  */
+
+  DMA_HandleTypeDef             *hdma;      /*!< Pointer DMA handler                   */
+
+}SDRAM_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SDRAM_Exported_Macros SDRAM Exported Macros
+  * @{
+  */
+
+/** @brief Reset SDRAM handle state
+  * @param  __HANDLE__: specifies the SDRAM handle.
+  * @retval None
+  */
+#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDRAM_Exported_Functions SDRAM Exported Functions
+  * @{
+  */
+
+/** @addtogroup SDRAM_Exported_Functions_Group1
+  * @{
+  */
+
+/* Initialization/de-initialization functions *********************************/
+HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing);
+HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram);
+
+void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/** @addtogroup SDRAM_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t * pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+/**
+  * @}
+  */
+
+/** @addtogroup SDRAM_Exported_Functions_Group3
+  * @{
+  */
+/* SDRAM Control functions  *****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate);
+HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber);
+uint32_t          HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram);
+/**
+  * @}
+  */
+
+/** @addtogroup SDRAM_Exported_Functions_Group4
+  * @{
+  */
+/* SDRAM State functions ********************************************************/
+HAL_SDRAM_StateTypeDef  HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SDRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smartcard.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smartcard.h
new file mode 100644
index 0000000..ffa9ba6
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smartcard.h
@@ -0,0 +1,620 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_smartcard.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of SMARTCARD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SMARTCARD_H
+#define __STM32F4xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SMARTCARD
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
+  * @{
+  */
+
+/**
+  * @brief SMARTCARD Init Structure definition
+  */
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< This member configures the SmartCard communication baud rate.
+                                           The baud rate is computed using the following formula:
+                                           - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
+                                           - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter can be a value of @ref SMARTCARD_Word_Length */
+
+  uint32_t StopBits;                  /*!< Specifies the number of stop bits transmitted.
+                                           This parameter can be a value of @ref SMARTCARD_Stop_Bits */
+
+  uint32_t Parity;                   /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref SMARTCARD_Parity
+                                           @note When parity is enabled, the computed parity is inserted
+                                                 at the MSB position of the transmitted data (9th bit when
+                                                 the word length is set to 9 data bits; 8th bit when the
+                                                 word length is set to 8 data bits).*/
+
+  uint32_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref SMARTCARD_Mode */
+
+  uint32_t CLKPolarity;               /*!< Specifies the steady state of the serial clock.
+                                           This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+  uint32_t CLKPhase;                  /*!< Specifies the clock transition on which the bit capture is made.
+                                           This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+  uint32_t CLKLastBit;                /*!< Specifies whether the clock pulse corresponding to the last transmitted
+                                           data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+                                           This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+  uint32_t Prescaler;                 /*!< Specifies the SmartCard Prescaler value used for dividing the system clock
+                                           to provide the smartcard clock
+                                           This parameter can be a value of @ref SMARTCARD_Prescaler */
+
+  uint32_t GuardTime;                 /*!< Specifies the SmartCard Guard Time value in terms of number of baud clocks
+                                           The value given in the register (5 significant bits) is multiplied by 2
+                                           to give the division factor of the source clock frequency */
+
+  uint32_t NACKState;                 /*!< Specifies the SmartCard NACK Transmission state.
+                                           This parameter can be a value of @ref SmartCard_NACK_State */
+}SMARTCARD_InitTypeDef;
+
+/**
+  * @brief HAL State structures definition
+  */
+typedef enum
+{
+  HAL_SMARTCARD_STATE_RESET             = 0x00,    /*!< Peripheral is not yet Initialized                  */
+  HAL_SMARTCARD_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use           */
+  HAL_SMARTCARD_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing                     */
+  HAL_SMARTCARD_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing               */
+  HAL_SMARTCARD_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing                  */
+  HAL_SMARTCARD_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission and Reception process is ongoing */
+  HAL_SMARTCARD_STATE_TIMEOUT           = 0x03,    /*!< Timeout state                                      */
+  HAL_SMARTCARD_STATE_ERROR             = 0x04     /*!< Error                                              */
+}HAL_SMARTCARD_StateTypeDef;
+
+/**
+  * @brief  SMARTCARD handle Structure definition
+  */
+typedef struct
+{
+  USART_TypeDef                    *Instance;        /* USART registers base address */
+
+  SMARTCARD_InitTypeDef            Init;             /* SmartCard communication parameters */
+
+  uint8_t                          *pTxBuffPtr;      /* Pointer to SmartCard Tx transfer Buffer */
+
+  uint16_t                         TxXferSize;       /* SmartCard Tx Transfer size */
+
+  uint16_t                         TxXferCount;      /* SmartCard Tx Transfer Counter */
+
+  uint8_t                          *pRxBuffPtr;      /* Pointer to SmartCard Rx transfer Buffer */
+
+  uint16_t                         RxXferSize;       /* SmartCard Rx Transfer size */
+
+  uint16_t                         RxXferCount;      /* SmartCard Rx Transfer Counter */
+
+  DMA_HandleTypeDef                *hdmatx;          /* SmartCard Tx DMA Handle parameters */
+
+  DMA_HandleTypeDef                *hdmarx;          /* SmartCard Rx DMA Handle parameters */
+
+  HAL_LockTypeDef                  Lock;             /* Locking object */
+
+  __IO HAL_SMARTCARD_StateTypeDef  State;            /* SmartCard communication state */
+
+  __IO uint32_t  ErrorCode;                          /* SmartCard Error code */
+
+}SMARTCARD_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants  SMARTCARD Exported constants
+  * @{
+  */
+/** @defgroup SMARTCARD_Error_Code SMARTCARD Error Code
+  * @brief    SMARTCARD Error Code
+  * @{
+  */
+#define HAL_SMARTCARD_ERROR_NONE         ((uint32_t)0x00000000)   /*!< No error            */
+#define HAL_SMARTCARD_ERROR_PE           ((uint32_t)0x00000001)   /*!< Parity error        */
+#define HAL_SMARTCARD_ERROR_NE           ((uint32_t)0x00000002)   /*!< Noise error         */
+#define HAL_SMARTCARD_ERROR_FE           ((uint32_t)0x00000004)   /*!< Frame error         */
+#define HAL_SMARTCARD_ERROR_ORE          ((uint32_t)0x00000008)   /*!< Overrun error       */
+#define HAL_SMARTCARD_ERROR_DMA          ((uint32_t)0x00000010)   /*!< DMA transfer error  */
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
+  * @{
+  */
+#define SMARTCARD_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
+  * @{
+  */
+#define SMARTCARD_STOPBITS_0_5                   ((uint32_t)USART_CR2_STOP_0)
+#define SMARTCARD_STOPBITS_1_5                   ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity
+  * @{
+  */
+#define SMARTCARD_PARITY_EVEN                    ((uint32_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD                     ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Mode
+  * @{
+  */
+#define SMARTCARD_MODE_RX                        ((uint32_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX                        ((uint32_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX                     ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
+  * @{
+  */
+#define SMARTCARD_POLARITY_LOW                   ((uint32_t)0x00000000)
+#define SMARTCARD_POLARITY_HIGH                  ((uint32_t)USART_CR2_CPOL)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Clock_Phase  SMARTCARD Clock Phase
+  * @{
+  */
+#define SMARTCARD_PHASE_1EDGE                    ((uint32_t)0x00000000)
+#define SMARTCARD_PHASE_2EDGE                    ((uint32_t)USART_CR2_CPHA)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Last_Bit  SMARTCARD Last Bit
+  * @{
+  */
+#define SMARTCARD_LASTBIT_DISABLE                ((uint32_t)0x00000000)
+#define SMARTCARD_LASTBIT_ENABLE                 ((uint32_t)USART_CR2_LBCL)
+/**
+  * @}
+  */
+
+/** @defgroup SmartCard_NACK_State  SMARTCARD NACK State
+  * @{
+  */
+#define SMARTCARD_NACK_ENABLE                  ((uint32_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLE                 ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup SmartCard_DMA_Requests   SMARTCARD DMA requests
+  * @{
+  */
+#define SMARTCARD_DMAREQ_TX                    ((uint32_t)USART_CR3_DMAT)
+#define SMARTCARD_DMAREQ_RX                    ((uint32_t)USART_CR3_DMAR)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler
+  * @{
+  */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV2         ((uint32_t)0x00000001)          /*!< SYSCLK divided by 2 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV4         ((uint32_t)0x00000002)          /*!< SYSCLK divided by 4 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV6         ((uint32_t)0x00000003)          /*!< SYSCLK divided by 6 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV8         ((uint32_t)0x00000004)          /*!< SYSCLK divided by 8 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV10        ((uint32_t)0x00000005)          /*!< SYSCLK divided by 10 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV12        ((uint32_t)0x00000006)          /*!< SYSCLK divided by 12 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV14        ((uint32_t)0x00000007)          /*!< SYSCLK divided by 14 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV16        ((uint32_t)0x00000008)          /*!< SYSCLK divided by 16 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV18        ((uint32_t)0x00000009)          /*!< SYSCLK divided by 18 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV20        ((uint32_t)0x0000000A)          /*!< SYSCLK divided by 20 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV22        ((uint32_t)0x0000000B)          /*!< SYSCLK divided by 22 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV24        ((uint32_t)0x0000000C)          /*!< SYSCLK divided by 24 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV26        ((uint32_t)0x0000000D)          /*!< SYSCLK divided by 26 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV28        ((uint32_t)0x0000000E)          /*!< SYSCLK divided by 28 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV30        ((uint32_t)0x0000000F)          /*!< SYSCLK divided by 30 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV32        ((uint32_t)0x00000010)          /*!< SYSCLK divided by 32 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV34        ((uint32_t)0x00000011)          /*!< SYSCLK divided by 34 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV36        ((uint32_t)0x00000012)          /*!< SYSCLK divided by 36 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV38        ((uint32_t)0x00000013)          /*!< SYSCLK divided by 38 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV40        ((uint32_t)0x00000014)          /*!< SYSCLK divided by 40 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV42        ((uint32_t)0x00000015)          /*!< SYSCLK divided by 42 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV44        ((uint32_t)0x00000016)          /*!< SYSCLK divided by 44 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV46        ((uint32_t)0x00000017)          /*!< SYSCLK divided by 46 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV48        ((uint32_t)0x00000018)          /*!< SYSCLK divided by 48 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV50        ((uint32_t)0x00000019)          /*!< SYSCLK divided by 50 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV52        ((uint32_t)0x0000001A)          /*!< SYSCLK divided by 52 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV54        ((uint32_t)0x0000001B)          /*!< SYSCLK divided by 54 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV56        ((uint32_t)0x0000001C)          /*!< SYSCLK divided by 56 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV58        ((uint32_t)0x0000001D)          /*!< SYSCLK divided by 58 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV60        ((uint32_t)0x0000001E)          /*!< SYSCLK divided by 60 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV62        ((uint32_t)0x0000001F)          /*!< SYSCLK divided by 62 */
+/**
+  * @}
+  */
+
+/** @defgroup SmartCard_Flags SMARTCARD Flags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the SR register
+  * @{
+  */
+#define SMARTCARD_FLAG_TXE                       ((uint32_t)0x00000080)
+#define SMARTCARD_FLAG_TC                        ((uint32_t)0x00000040)
+#define SMARTCARD_FLAG_RXNE                      ((uint32_t)0x00000020)
+#define SMARTCARD_FLAG_IDLE                      ((uint32_t)0x00000010)
+#define SMARTCARD_FLAG_ORE                       ((uint32_t)0x00000008)
+#define SMARTCARD_FLAG_NE                        ((uint32_t)0x00000004)
+#define SMARTCARD_FLAG_FE                        ((uint32_t)0x00000002)
+#define SMARTCARD_FLAG_PE                        ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup SmartCard_Interrupt_definition SMARTCARD Interrupts Definition
+  *        Elements values convention: 0xY000XXXX
+  *           - XXXX  : Interrupt mask in the XX register
+  *           - Y  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR3 register
+  * @{
+  */
+#define SMARTCARD_IT_PE                         ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_PEIE))
+#define SMARTCARD_IT_TXE                        ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_TXEIE))
+#define SMARTCARD_IT_TC                         ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_TCIE))
+#define SMARTCARD_IT_RXNE                       ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE))
+#define SMARTCARD_IT_IDLE                       ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE))
+#define SMARTCARD_IT_ERR                        ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28 | USART_CR3_EIE))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
+  * @{
+  */
+
+/** @brief Reset SMARTCARD handle state
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  * @retval None
+  */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+
+/** @brief  Flushs the Smartcard DR register
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  */
+#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief  Checks whether the specified Smartcard flag is set or not.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg SMARTCARD_FLAG_TXE:  Transmit data register empty flag
+  *            @arg SMARTCARD_FLAG_TC:   Transmission Complete flag
+  *            @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
+  *            @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag
+  *            @arg SMARTCARD_FLAG_ORE:  Overrun Error flag
+  *            @arg SMARTCARD_FLAG_NE:   Noise Error flag
+  *            @arg SMARTCARD_FLAG_FE:   Framing Error flag
+  *            @arg SMARTCARD_FLAG_PE:   Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clears the specified Smartcard pending flags.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg SMARTCARD_FLAG_TC:   Transmission Complete flag.
+  *            @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag.
+  *
+  * @note   PE (Parity error), FE (Framing error), NE (Noise error) and ORE (Overrun
+  *          error) flags are cleared by software sequence: a read operation to
+  *          USART_SR register followed by a read operation to USART_DR register.
+  * @note   RXNE flag can be also cleared by a read to the USART_DR register.
+  * @note   TC flag can be also cleared by software sequence: a read operation to
+  *          USART_SR register followed by a write operation to USART_DR register.
+  * @note   TXE flag is cleared only by a write to the USART_DR register.
+  */
+#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief  Clear the SMARTCARD PE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)     \
+  do{                                                \
+    __IO uint32_t tmpreg;                            \
+    tmpreg = (__HANDLE__)->Instance->SR;             \
+    tmpreg = (__HANDLE__)->Instance->DR;             \
+    UNUSED(tmpreg);                                  \
+  } while(0)
+
+/** @brief  Clear the SMARTCARD FE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the SMARTCARD NE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the SMARTCARD ORE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the SMARTCARD IDLE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+
+/** @brief  Enables or disables the specified SmartCard interrupts.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  * @param  __INTERRUPT__: specifies the SMARTCARD interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg SMARTCARD_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg SMARTCARD_IT_TC:   Transmission complete interrupt
+  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+  *            @arg SMARTCARD_IT_PE:   Parity Error interrupt
+  *            @arg SMARTCARD_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+                                                                 ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+                                                                 ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+
+/** @brief  Checks whether the specified SmartCard interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the SmartCard Handle.
+  * @param  __IT__: specifies the SMARTCARD interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg SMARTCARD_IT_TC:  Transmission complete interrupt
+  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+  *            @arg SMARTCARD_IT_ERR: Error interrupt
+  *            @arg SMARTCARD_IT_PE: Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK))
+
+/** @brief  Macro to enable the SMARTCARD's one bit sample method
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  * @retval None
+  */
+#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief  Macro to disable the SMARTCARD's one bit sample method
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  * @retval None
+  */
+#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief  Enable the USART associated to the SMARTCARD Handle
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+  * @retval None
+  */
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR1 |=  USART_CR1_UE)
+
+/** @brief  Disable the USART associated to the SMARTCARD Handle
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+  * @retval None
+  */
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR1 &=  ~USART_CR1_UE)
+
+/** @brief  Macros to enable or disable the SmartCard DMA request.
+  * @param  __HANDLE__: specifies the SmartCard Handle.
+  * @param  __REQUEST__: specifies the SmartCard DMA request.
+  *          This parameter can be one of the following values:
+  *            @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request
+  *            @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request
+  */
+#define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__)    ((__HANDLE__)->Instance->CR3 |=  (__REQUEST__))
+#define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__)   ((__HANDLE__)->Instance->CR3 &=  ~(__REQUEST__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMARTCARD_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);
+/**
+  * @}
+  */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);
+/**
+  * @}
+  */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  **************************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants
+  * @{
+  */
+
+/** @brief SMARTCARD interruptions flag mask
+  *
+  */
+#define SMARTCARD_IT_MASK   ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+                                        USART_CR1_IDLEIE | USART_CR3_EIE )
+#define SMARTCARD_DIV(_PCLK_, _BAUD_)              (((_PCLK_)*25)/(4*(_BAUD_)))
+#define SMARTCARD_DIVMANT(_PCLK_, _BAUD_)          (SMARTCARD_DIV((_PCLK_), (_BAUD_))/100)
+#define SMARTCARD_DIVFRAQ(_PCLK_, _BAUD_)          (((SMARTCARD_DIV((_PCLK_), (_BAUD_)) - (SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define SMARTCARD_BRR(_PCLK_, _BAUD_)              ((SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) << 4)|(SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define SMARTCARD_CR1_REG_INDEX                 1
+#define SMARTCARD_CR3_REG_INDEX                 3
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Macros   SMARTCARD Private Macros
+  * @{
+  */
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B)
+#define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \
+                                         ((STOPBITS) == SMARTCARD_STOPBITS_1_5))
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
+                                     ((PARITY) == SMARTCARD_PARITY_ODD))
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \
+                                       ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE))
+#define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \
+                                       ((NACK) == SMARTCARD_NACK_DISABLE))
+#define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spdifrx.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spdifrx.h
new file mode 100644
index 0000000..1ba666b
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spdifrx.h
@@ -0,0 +1,559 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_spdifrx.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of SPDIFRX HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SPDIFRX_H
+#define __STM32F4xx_HAL_SPDIFRX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SPDIFRX
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types
+  * @{
+  */
+
+/**
+  * @brief SPDIFRX Init structure definition
+  */
+typedef struct
+{
+  uint32_t InputSelection;           /*!< Specifies the SPDIF input selection.
+                                          This parameter can be a value of @ref SPDIFRX_Input_Selection */
+
+  uint32_t Retries;                  /*!< Specifies the Maximum allowed re-tries during synchronization phase.
+                                          This parameter can be a value of @ref SPDIFRX_Max_Retries */
+
+  uint32_t WaitForActivity;          /*!< Specifies the wait for activity on SPDIF selected input.
+                                          This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */
+
+  uint32_t ChannelSelection;         /*!< Specifies whether the control flow will take the channel status from channel A or B.
+                                          This parameter can be a value of @ref SPDIFRX_Channel_Selection */
+
+  uint32_t DataFormat;               /*!< Specifies the Data samples format (LSB, MSB, ...).
+                                          This parameter can be a value of @ref SPDIFRX_Data_Format */
+
+  uint32_t StereoMode;               /*!< Specifies whether the peripheral is in stereo or mono mode.
+                                          This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
+
+    uint32_t PreambleTypeMask;          /*!< Specifies whether The preamble type bits are copied or not into the received frame.
+                                                                                   This parameter can be a value of @ref SPDIFRX_PT_Mask */
+
+    uint32_t ChannelStatusMask;        /*!< Specifies whether the channel status and user bits are copied or not into the received frame.
+                                                                                  This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */
+
+    uint32_t ValidityBitMask;          /*!< Specifies whether the validity bit is copied or not into the received frame.
+                                                                                  This parameter can be a value of @ref SPDIFRX_V_Mask */
+
+    uint32_t ParityErrorMask;          /*!< Specifies whether the parity error bit is copied or not into the received frame.
+                                                                                  This parameter can be a value of @ref SPDIFRX_PE_Mask */
+
+}SPDIFRX_InitTypeDef;
+
+/**
+  * @brief SPDIFRX SetDataFormat structure definition
+  */
+typedef struct
+{
+  uint32_t DataFormat;               /*!< Specifies the Data samples format (LSB, MSB, ...).
+                                          This parameter can be a value of @ref SPDIFRX_Data_Format */
+
+  uint32_t StereoMode;               /*!< Specifies whether the peripheral is in stereo or mono mode.
+                                          This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
+
+  uint32_t PreambleTypeMask;          /*!< Specifies whether The preamble type bits are copied or not into the received frame.
+                                                                                   This parameter can be a value of @ref SPDIFRX_PT_Mask */
+
+  uint32_t ChannelStatusMask;        /*!< Specifies whether the channel status and user bits are copied or not into the received frame.
+                                                                                  This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */
+
+  uint32_t ValidityBitMask;          /*!< Specifies whether the validity bit is copied or not into the received frame.
+                                                                                  This parameter can be a value of @ref SPDIFRX_V_Mask */
+
+  uint32_t ParityErrorMask;          /*!< Specifies whether the parity error bit is copied or not into the received frame.
+                                                                                  This parameter can be a value of @ref SPDIFRX_PE_Mask */
+
+}SPDIFRX_SetDataFormatTypeDef;
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_SPDIFRX_STATE_RESET      = 0x00,  /*!< SPDIFRX not yet initialized or disabled                */
+  HAL_SPDIFRX_STATE_READY      = 0x01,  /*!< SPDIFRX initialized and ready for use                  */
+  HAL_SPDIFRX_STATE_BUSY       = 0x02,  /*!< SPDIFRX internal process is ongoing                    */
+  HAL_SPDIFRX_STATE_BUSY_RX    = 0x03,  /*!< SPDIFRX internal Data Flow RX process is ongoing       */
+  HAL_SPDIFRX_STATE_BUSY_CX    = 0x04,  /*!< SPDIFRX internal Control Flow RX process is ongoing    */
+  HAL_SPDIFRX_STATE_ERROR      = 0x07   /*!< SPDIFRX error state                                    */
+}HAL_SPDIFRX_StateTypeDef;
+
+/**
+  * @brief SPDIFRX handle Structure definition
+  */
+typedef struct
+{
+  SPDIFRX_TypeDef            *Instance;    /* SPDIFRX registers base address */
+
+  SPDIFRX_InitTypeDef        Init;         /* SPDIFRX communication parameters */
+
+  uint32_t                   *pRxBuffPtr;  /* Pointer to SPDIFRX Rx transfer buffer */
+
+    uint32_t                   *pCsBuffPtr;  /* Pointer to SPDIFRX Cx transfer buffer */
+
+  __IO uint16_t              RxXferSize;   /* SPDIFRX Rx transfer size */
+
+  __IO uint16_t              RxXferCount;  /* SPDIFRX Rx transfer counter
+                                              (This field is initialized at the
+                                               same value as transfer size at the
+                                               beginning of the transfer and
+                                               decremented when a sample is received.
+                                               NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+  __IO uint16_t              CsXferSize;   /* SPDIFRX Rx transfer size */
+
+  __IO uint16_t              CsXferCount;  /* SPDIFRX Rx transfer counter
+                                              (This field is initialized at the
+                                               same value as transfer size at the
+                                               beginning of the transfer and
+                                               decremented when a sample is received.
+                                               NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+  DMA_HandleTypeDef          *hdmaCsRx;    /* SPDIFRX EC60958_channel_status and user_information DMA handle parameters */
+
+  DMA_HandleTypeDef          *hdmaDrRx;    /* SPDIFRX Rx DMA handle parameters */
+
+  __IO HAL_LockTypeDef       Lock;         /* SPDIFRX locking object */
+
+  __IO HAL_SPDIFRX_StateTypeDef  State;    /* SPDIFRX communication state */
+
+  __IO uint32_t  ErrorCode;                /* SPDIFRX Error code                 */
+
+}SPDIFRX_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants
+  * @{
+  */
+/** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code
+  * @{
+  */
+#define HAL_SPDIFRX_ERROR_NONE      ((uint32_t)0x00000000)  /*!< No error           */
+#define HAL_SPDIFRX_ERROR_TIMEOUT   ((uint32_t)0x00000001)  /*!< Timeout error      */
+#define HAL_SPDIFRX_ERROR_OVR       ((uint32_t)0x00000002)  /*!< OVR error          */
+#define HAL_SPDIFRX_ERROR_PE        ((uint32_t)0x00000004)  /*!< Parity error       */
+#define HAL_SPDIFRX_ERROR_DMA       ((uint32_t)0x00000008)  /*!< DMA transfer error */
+#define HAL_SPDIFRX_ERROR_UNKNOWN   ((uint32_t)0x00000010)  /*!< Unknown Error error */
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection
+  * @{
+  */
+#define SPDIFRX_INPUT_IN0               ((uint32_t)0x00000000)
+#define SPDIFRX_INPUT_IN1               ((uint32_t)0x00010000)
+#define SPDIFRX_INPUT_IN2               ((uint32_t)0x00020000)
+#define SPDIFRX_INPUT_IN3               ((uint32_t)0x00030000)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries
+  * @{
+  */
+#define SPDIFRX_MAXRETRIES_NONE            ((uint32_t)0x00000000)
+#define SPDIFRX_MAXRETRIES_3               ((uint32_t)0x00001000)
+#define SPDIFRX_MAXRETRIES_15              ((uint32_t)0x00002000)
+#define SPDIFRX_MAXRETRIES_63              ((uint32_t)0x00003000)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity
+  * @{
+  */
+#define SPDIFRX_WAITFORACTIVITY_OFF                   ((uint32_t)0x00000000)
+#define SPDIFRX_WAITFORACTIVITY_ON                    ((uint32_t)SPDIFRX_CR_WFA)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask
+* @{
+*/
+#define SPDIFRX_PREAMBLETYPEMASK_OFF                   ((uint32_t)0x00000000)
+#define SPDIFRX_PREAMBLETYPEMASK_ON                    ((uint32_t)SPDIFRX_CR_PTMSK)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_ChannelStatus_Mask  SPDIFRX Channel Status Mask
+* @{
+*/
+#define SPDIFRX_CHANNELSTATUS_OFF                 ((uint32_t)0x00000000)        /* The channel status and user bits are copied into the SPDIF_DR */
+#define SPDIFRX_CHANNELSTATUS_ON                  ((uint32_t)SPDIFRX_CR_CUMSK)  /* The channel status and user bits are not copied into the SPDIF_DR, zeros are written instead*/
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask
+* @{
+*/
+#define SPDIFRX_VALIDITYMASK_OFF                   ((uint32_t)0x00000000)
+#define SPDIFRX_VALIDITYMASK_ON                    ((uint32_t)SPDIFRX_CR_VMSK)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_PE_Mask  SPDIFRX Parity Error Mask
+* @{
+*/
+#define SPDIFRX_PARITYERRORMASK_OFF                   ((uint32_t)0x00000000)
+#define SPDIFRX_PARITYERRORMASK_ON                    ((uint32_t)SPDIFRX_CR_PMSK)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Channel_Selection  SPDIFRX Channel Selection
+  * @{
+  */
+#define SPDIFRX_CHANNEL_A      ((uint32_t)0x00000000)
+#define SPDIFRX_CHANNEL_B      ((uint32_t)SPDIFRX_CR_CHSEL)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format
+  * @{
+  */
+#define SPDIFRX_DATAFORMAT_LSB                   ((uint32_t)0x00000000)
+#define SPDIFRX_DATAFORMAT_MSB                   ((uint32_t)0x00000010)
+#define SPDIFRX_DATAFORMAT_32BITS                ((uint32_t)0x00000020)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode
+  * @{
+  */
+#define SPDIFRX_STEREOMODE_DISABLE           ((uint32_t)0x00000000)
+#define SPDIFRX_STEREOMODE_ENABLE           ((uint32_t)SPDIFRX_CR_RXSTEO)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_State SPDIFRX State
+  * @{
+  */
+
+#define SPDIFRX_STATE_IDLE    ((uint32_t)0xFFFFFFFC)
+#define SPDIFRX_STATE_SYNC    ((uint32_t)0x00000001)
+#define SPDIFRX_STATE_RCV     ((uint32_t)SPDIFRX_CR_SPDIFEN)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition
+  * @{
+  */
+#define SPDIFRX_IT_RXNE                       ((uint32_t)SPDIFRX_IMR_RXNEIE)
+#define SPDIFRX_IT_CSRNE                      ((uint32_t)SPDIFRX_IMR_CSRNEIE)
+#define SPDIFRX_IT_PERRIE                     ((uint32_t)SPDIFRX_IMR_PERRIE)
+#define SPDIFRX_IT_OVRIE                      ((uint32_t)SPDIFRX_IMR_OVRIE)
+#define SPDIFRX_IT_SBLKIE                     ((uint32_t)SPDIFRX_IMR_SBLKIE)
+#define SPDIFRX_IT_SYNCDIE                    ((uint32_t)SPDIFRX_IMR_SYNCDIE)
+#define SPDIFRX_IT_IFEIE                      ((uint32_t)SPDIFRX_IMR_IFEIE )
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition
+  * @{
+  */
+#define SPDIFRX_FLAG_RXNE                   ((uint32_t)SPDIFRX_SR_RXNE)
+#define SPDIFRX_FLAG_CSRNE                  ((uint32_t)SPDIFRX_SR_CSRNE)
+#define SPDIFRX_FLAG_PERR                   ((uint32_t)SPDIFRX_SR_PERR)
+#define SPDIFRX_FLAG_OVR                    ((uint32_t)SPDIFRX_SR_OVR)
+#define SPDIFRX_FLAG_SBD                    ((uint32_t)SPDIFRX_SR_SBD)
+#define SPDIFRX_FLAG_SYNCD                  ((uint32_t)SPDIFRX_SR_SYNCD)
+#define SPDIFRX_FLAG_FERR                   ((uint32_t)SPDIFRX_SR_FERR)
+#define SPDIFRX_FLAG_SERR                   ((uint32_t)SPDIFRX_SR_SERR)
+#define SPDIFRX_FLAG_TERR                   ((uint32_t)SPDIFRX_SR_TERR)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros
+  * @{
+  */
+
+/** @brief  Reset SPDIFRX handle state
+  * @param  __HANDLE__: SPDIFRX handle.
+  * @retval None
+  */
+#define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = (uint16_t)SPDIFRX_CR_SPDIFEN)
+
+/** @brief  Disable the specified SPDIFRX peripheral (IDLE State).
+  * @param  __HANDLE__: specifies the SPDIFRX Handle.
+  * @retval None
+  */
+#define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE)
+
+/** @brief  Enable the specified SPDIFRX peripheral (SYNC State).
+  * @param  __HANDLE__: specifies the SPDIFRX Handle.
+  * @retval None
+  */
+#define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC)
+
+
+/** @brief  Enable the specified SPDIFRX peripheral (RCV State).
+  * @param  __HANDLE__: specifies the SPDIFRX Handle.
+  * @retval None
+  */
+#define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV)
+
+
+/** @brief  Enable or disable the specified SPDIFRX interrupts.
+  * @param  __HANDLE__: specifies the SPDIFRX Handle.
+  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
+  *        This parameter can be one of the following values:
+  *            @arg SPDIFRX_IT_RXNE
+  *            @arg SPDIFRX_IT_CSRNE
+  *            @arg SPDIFRX_IT_PERRIE
+  *            @arg SPDIFRX_IT_OVRIE
+  *            @arg SPDIFRX_IT_SBLKIE
+  *            @arg SPDIFRX_IT_SYNCDIE
+  *            @arg SPDIFRX_IT_IFEIE
+  * @retval None
+  */
+#define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (uint16_t)(~(__INTERRUPT__)))
+
+/** @brief  Checks if the specified SPDIFRX interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the SPDIFRX Handle.
+  * @param  __INTERRUPT__: specifies the SPDIFRX interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg SPDIFRX_IT_RXNE
+  *            @arg SPDIFRX_IT_CSRNE
+  *            @arg SPDIFRX_IT_PERRIE
+  *            @arg SPDIFRX_IT_OVRIE
+  *            @arg SPDIFRX_IT_SBLKIE
+  *            @arg SPDIFRX_IT_SYNCDIE
+  *            @arg SPDIFRX_IT_IFEIE
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks whether the specified SPDIFRX flag is set or not.
+  * @param  __HANDLE__: specifies the SPDIFRX Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg SPDIFRX_FLAG_RXNE
+  *            @arg SPDIFRX_FLAG_CSRNE
+  *            @arg SPDIFRX_FLAG_PERR
+  *            @arg SPDIFRX_FLAG_OVR
+  *            @arg SPDIFRX_FLAG_SBD
+  *            @arg SPDIFRX_FLAG_SYNCD
+  *            @arg SPDIFRX_FLAG_FERR
+  *            @arg SPDIFRX_FLAG_SERR
+  *            @arg SPDIFRX_FLAG_TERR
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+  *                       to clear the corresponding interrupt
+  *          This parameter can be one of the following values:
+  *            @arg SPDIFRX_FLAG_PERR
+  *            @arg SPDIFRX_FLAG_OVR
+  *            @arg SPDIFRX_SR_SBD
+  *            @arg SPDIFRX_SR_SYNCD
+  * @retval None
+  */
+#define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPDIFRX_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif);
+HAL_StatusTypeDef HAL_SPDIFRX_DeInit (SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif);
+HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef  sDataFormat);
+/**
+  * @}
+  */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions  ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+/**
+  * @}
+  */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control and State functions  ************************************/
+HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif);
+uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros
+  * @{
+  */
+#define IS_SPDIFRX_INPUT_SELECT(INPUT)  (((INPUT) == SPDIFRX_INPUT_IN1) || \
+                                         ((INPUT) == SPDIFRX_INPUT_IN2) || \
+                                         ((INPUT) == SPDIFRX_INPUT_IN3)  || \
+                                         ((INPUT) == SPDIFRX_INPUT_IN0))
+#define IS_SPDIFRX_MAX_RETRIES(RET)   (((RET) == SPDIFRX_MAXRETRIES_NONE) || \
+                                      ((RET) == SPDIFRX_MAXRETRIES_3)  || \
+                                      ((RET) == SPDIFRX_MAXRETRIES_15) || \
+                                      ((RET) == SPDIFRX_MAXRETRIES_63))
+#define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL)    (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \
+                                               ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF))
+#define IS_PREAMBLE_TYPE_MASK(VAL)           (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \
+                                             ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF))
+#define IS_VALIDITY_MASK(VAL)               (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \
+                                             ((VAL) == SPDIFRX_VALIDITYMASK_ON))
+#define IS_PARITY_ERROR_MASK(VAL)            (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \
+                                             ((VAL) == SPDIFRX_PARITYERRORMASK_ON))
+#define IS_SPDIFRX_CHANNEL(CHANNEL)   (((CHANNEL) == SPDIFRX_CHANNEL_A) || \
+                                       ((CHANNEL) == SPDIFRX_CHANNEL_B))
+#define IS_SPDIFRX_DATA_FORMAT(FORMAT)           (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \
+                                                 ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \
+                                                 ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS))
+#define IS_STEREO_MODE(MODE)                 (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \
+                                             ((MODE) == SPDIFRX_STEREOMODE_ENABLE))
+
+#define IS_CHANNEL_STATUS_MASK(VAL)          (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \
+                                              ((VAL) == SPDIFRX_CHANNELSTATUS_OFF))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions
+  * @{
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_SPDIFRX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h
new file mode 100644
index 0000000..8057262
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h
@@ -0,0 +1,575 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_spi.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of SPI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SPI_H
+#define __STM32F4xx_HAL_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SPI
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+  * @{
+  */
+
+/**
+  * @brief  SPI Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Mode;               /*!< Specifies the SPI operating mode.
+                                    This parameter can be a value of @ref SPI_mode */
+
+  uint32_t Direction;          /*!< Specifies the SPI Directional mode state.
+                                    This parameter can be a value of @ref SPI_Direction_mode */
+
+  uint32_t DataSize;           /*!< Specifies the SPI data size.
+                                    This parameter can be a value of @ref SPI_data_size */
+
+  uint32_t CLKPolarity;        /*!< Specifies the serial clock steady state.
+                                    This parameter can be a value of @ref SPI_Clock_Polarity */
+
+  uint32_t CLKPhase;           /*!< Specifies the clock active edge for the bit capture.
+                                    This parameter can be a value of @ref SPI_Clock_Phase */
+
+  uint32_t NSS;                /*!< Specifies whether the NSS signal is managed by
+                                    hardware (NSS pin) or by software using the SSI bit.
+                                    This parameter can be a value of @ref SPI_Slave_Select_management */
+
+  uint32_t BaudRatePrescaler;  /*!< Specifies the Baud Rate prescaler value which will be
+                                    used to configure the transmit and receive SCK clock.
+                                    This parameter can be a value of @ref SPI_BaudRate_Prescaler
+                                    @note The communication clock is derived from the master
+                                    clock. The slave clock does not need to be set */
+
+  uint32_t FirstBit;           /*!< Specifies whether data transfers start from MSB or LSB bit.
+                                    This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+  uint32_t TIMode;             /*!< Specifies if the TI mode is enabled or not.
+                                    This parameter can be a value of @ref SPI_TI_mode */
+
+  uint32_t CRCCalculation;     /*!< Specifies if the CRC calculation is enabled or not.
+                                    This parameter can be a value of @ref SPI_CRC_Calculation */
+
+  uint32_t CRCPolynomial;      /*!< Specifies the polynomial used for the CRC calculation.
+                                    This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
+
+}SPI_InitTypeDef;
+
+/**
+  * @brief  HAL SPI State structure definition
+  */
+typedef enum
+{
+  HAL_SPI_STATE_RESET      = 0x00,  /*!< SPI not yet initialized or disabled                */
+  HAL_SPI_STATE_READY      = 0x01,  /*!< SPI initialized and ready for use                  */
+  HAL_SPI_STATE_BUSY       = 0x02,  /*!< SPI process is ongoing                             */
+  HAL_SPI_STATE_BUSY_TX    = 0x12,  /*!< Data Transmission process is ongoing               */
+  HAL_SPI_STATE_BUSY_RX    = 0x22,  /*!< Data Reception process is ongoing                  */
+  HAL_SPI_STATE_BUSY_TX_RX = 0x32,  /*!< Data Transmission and Reception process is ongoing */
+  HAL_SPI_STATE_ERROR      = 0x03   /*!< SPI error state                                    */
+
+}HAL_SPI_StateTypeDef;
+
+/**
+  * @brief  SPI handle Structure definition
+  */
+typedef struct __SPI_HandleTypeDef
+{
+  SPI_TypeDef                *Instance;    /* SPI registers base address */
+
+  SPI_InitTypeDef            Init;         /* SPI communication parameters */
+
+  uint8_t                    *pTxBuffPtr;  /* Pointer to SPI Tx transfer Buffer */
+
+  uint16_t                   TxXferSize;   /* SPI Tx transfer size */
+
+  uint16_t                   TxXferCount;  /* SPI Tx Transfer Counter */
+
+  uint8_t                    *pRxBuffPtr;  /* Pointer to SPI Rx transfer Buffer */
+
+  uint16_t                   RxXferSize;   /* SPI Rx transfer size */
+
+  uint16_t                   RxXferCount;  /* SPI Rx Transfer Counter */
+
+  DMA_HandleTypeDef          *hdmatx;      /* SPI Tx DMA handle parameters */
+
+  DMA_HandleTypeDef          *hdmarx;      /* SPI Rx DMA handle parameters */
+
+  void                       (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */
+
+  void                       (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */
+
+  HAL_LockTypeDef            Lock;         /* SPI locking object */
+
+  __IO HAL_SPI_StateTypeDef  State;        /* SPI communication state */
+
+  __IO uint32_t              ErrorCode;    /* SPI Error code */
+
+}SPI_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
+  * @{
+  */
+
+/** @defgroup SPI_Error_Code SPI Error Code
+  * @brief    SPI Error Code
+  * @{
+  */
+#define HAL_SPI_ERROR_NONE         ((uint32_t)0x00000000)   /*!< No error             */
+#define HAL_SPI_ERROR_MODF         ((uint32_t)0x00000001)   /*!< MODF error           */
+#define HAL_SPI_ERROR_CRC          ((uint32_t)0x00000002)   /*!< CRC error            */
+#define HAL_SPI_ERROR_OVR          ((uint32_t)0x00000004)   /*!< OVR error            */
+#define HAL_SPI_ERROR_FRE          ((uint32_t)0x00000008)   /*!< FRE error            */
+#define HAL_SPI_ERROR_DMA          ((uint32_t)0x00000010)   /*!< DMA transfer error   */
+#define HAL_SPI_ERROR_FLAG         ((uint32_t)0x00000020)   /*!< Flag: RXNE,TXE, BSY  */
+/**
+  * @}
+  */
+
+/** @defgroup SPI_mode SPI Mode
+  * @{
+  */
+#define SPI_MODE_SLAVE                  ((uint32_t)0x00000000)
+#define SPI_MODE_MASTER                 (SPI_CR1_MSTR | SPI_CR1_SSI)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Direction_mode SPI Direction Mode
+  * @{
+  */
+#define SPI_DIRECTION_2LINES             ((uint32_t)0x00000000)
+#define SPI_DIRECTION_2LINES_RXONLY      SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE              SPI_CR1_BIDIMODE
+/**
+  * @}
+  */
+
+/** @defgroup SPI_data_size SPI Data Size
+  * @{
+  */
+#define SPI_DATASIZE_8BIT               ((uint32_t)0x00000000)
+#define SPI_DATASIZE_16BIT              SPI_CR1_DFF
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+  * @{
+  */
+#define SPI_POLARITY_LOW                ((uint32_t)0x00000000)
+#define SPI_POLARITY_HIGH               SPI_CR1_CPOL
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
+  * @{
+  */
+#define SPI_PHASE_1EDGE                 ((uint32_t)0x00000000)
+#define SPI_PHASE_2EDGE                 SPI_CR1_CPHA
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Slave_Select_management SPI Slave Select Management
+  * @{
+  */
+#define SPI_NSS_SOFT                    SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT              ((uint32_t)0x00000000)
+#define SPI_NSS_HARD_OUTPUT             ((uint32_t)0x00040000)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
+  * @{
+  */
+#define SPI_BAUDRATEPRESCALER_2         ((uint32_t)0x00000000)
+#define SPI_BAUDRATEPRESCALER_4         ((uint32_t)0x00000008)
+#define SPI_BAUDRATEPRESCALER_8         ((uint32_t)0x00000010)
+#define SPI_BAUDRATEPRESCALER_16        ((uint32_t)0x00000018)
+#define SPI_BAUDRATEPRESCALER_32        ((uint32_t)0x00000020)
+#define SPI_BAUDRATEPRESCALER_64        ((uint32_t)0x00000028)
+#define SPI_BAUDRATEPRESCALER_128       ((uint32_t)0x00000030)
+#define SPI_BAUDRATEPRESCALER_256       ((uint32_t)0x00000038)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transsmission
+  * @{
+  */
+#define SPI_FIRSTBIT_MSB                ((uint32_t)0x00000000)
+#define SPI_FIRSTBIT_LSB                SPI_CR1_LSBFIRST
+/**
+  * @}
+  */
+
+/** @defgroup SPI_TI_mode SPI TI Mode
+  * @{
+  */
+#define SPI_TIMODE_DISABLE             ((uint32_t)0x00000000)
+#define SPI_TIMODE_ENABLE              SPI_CR2_FRF
+/**
+  * @}
+  */
+
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
+  * @{
+  */
+#define SPI_CRCCALCULATION_DISABLE     ((uint32_t)0x00000000)
+#define SPI_CRCCALCULATION_ENABLE      SPI_CR1_CRCEN
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition
+  * @{
+  */
+#define SPI_IT_TXE                      SPI_CR2_TXEIE
+#define SPI_IT_RXNE                     SPI_CR2_RXNEIE
+#define SPI_IT_ERR                      SPI_CR2_ERRIE
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Flags_definition SPI Flags Definition
+  * @{
+  */
+#define SPI_FLAG_RXNE                   SPI_SR_RXNE
+#define SPI_FLAG_TXE                    SPI_SR_TXE
+#define SPI_FLAG_CRCERR                 SPI_SR_CRCERR
+#define SPI_FLAG_MODF                   SPI_SR_MODF
+#define SPI_FLAG_OVR                    SPI_SR_OVR
+#define SPI_FLAG_BSY                    SPI_SR_BSY
+#define SPI_FLAG_FRE                    SPI_SR_FRE
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+  * @{
+  */
+/** @brief Reset SPI handle state
+  * @param  __HANDLE__: specifies the SPI handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+
+/** @brief  Enable or disable the specified SPI interrupts.
+  * @param  __HANDLE__: specifies the SPI handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
+  *         This parameter can be one of the following values:
+  *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg SPI_IT_ERR: Error interrupt enable
+  * @retval None
+  */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief  Check if the specified SPI interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the SPI handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @param  __INTERRUPT__: specifies the SPI interrupt source to check.
+  *          This parameter can be one of the following values:
+  *             @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+  *             @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+  *             @arg SPI_IT_ERR: Error interrupt enable
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Check whether the specified SPI flag is set or not.
+  * @param  __HANDLE__: specifies the SPI handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+  *            @arg SPI_FLAG_TXE: Transmit buffer empty flag
+  *            @arg SPI_FLAG_CRCERR: CRC error flag
+  *            @arg SPI_FLAG_MODF: Mode fault flag
+  *            @arg SPI_FLAG_OVR: Overrun flag
+  *            @arg SPI_FLAG_BSY: Busy flag
+  *            @arg SPI_FLAG_FRE: Frame format error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the SPI CRCERR pending flag.
+  * @param  __HANDLE__: specifies the SPI handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = ~(SPI_FLAG_CRCERR))
+
+/** @brief  Clear the SPI MODF pending flag.
+  * @param  __HANDLE__: specifies the SPI handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__)            \
+  do{                                                   \
+    __IO uint32_t tmpreg;                               \
+    tmpreg = (__HANDLE__)->Instance->SR;                \
+    (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE);      \
+    UNUSED(tmpreg);                                     \
+  } while(0)
+
+/** @brief  Clear the SPI OVR pending flag.
+  * @param  __HANDLE__: specifies the SPI handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__)     \
+  do{                                           \
+    __IO uint32_t tmpreg;                       \
+    tmpreg = (__HANDLE__)->Instance->DR;        \
+    tmpreg = (__HANDLE__)->Instance->SR;        \
+    UNUSED(tmpreg);                             \
+  } while(0)
+
+/** @brief  Clear the SPI FRE pending flag.
+  * @param  __HANDLE__: specifies the SPI handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__)     \
+  do{                                             \
+  __IO uint32_t tmpreg;                         \
+  tmpreg = (__HANDLE__)->Instance->SR;          \
+  UNUSED(tmpreg);                               \
+  }while(0)
+
+/** @brief Enable SPI
+  * @param __HANDLE__: specifies the SPI Handle.
+  * @retval None
+  */
+#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |=  SPI_CR1_SPE)
+
+/** @brief Disable SPI
+  * @param __HANDLE__: specifies the SPI Handle.
+  * @retval None
+  */
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &=  ~SPI_CR1_SPE)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup SPI_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+/**
+  * @}
+  */
+
+/** @addtogroup SPI_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions  *****************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+/**
+  * @}
+  */
+
+/** @addtogroup SPI_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State and Control functions  **************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SPI_Private_Constants SPI Private Constants
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPI_Private_Macros SPI Private Macros
+  * @{
+  */
+
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
+                           ((MODE) == SPI_MODE_MASTER))
+
+
+#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_DIRECTION_2LINES)        || \
+                                     ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \
+                                     ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES)  || \
+                                                ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
+                                   ((DATASIZE) == SPI_DATASIZE_8BIT))
+
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
+                           ((CPOL) == SPI_POLARITY_HIGH))
+
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
+                           ((CPHA) == SPI_PHASE_2EDGE))
+
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT)       || \
+                         ((NSS) == SPI_NSS_HARD_INPUT) || \
+                         ((NSS) == SPI_NSS_HARD_OUTPUT))
+
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2)   || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_4)   || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_8)   || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_16)  || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_32)  || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_64)  || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
+                               ((BIT) == SPI_FIRSTBIT_LSB))
+
+#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLE) || \
+                             ((MODE) == SPI_TIMODE_ENABLE))
+
+#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLE) || \
+                                             ((CALCULATION) == SPI_CRCCALCULATION_ENABLE))
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
+
+#define SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+
+#define SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_BIDIOE)
+
+#define SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (~SPI_CR1_CRCEN);\
+                                           (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SPI_Private_Functions SPI Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h
new file mode 100644
index 0000000..e6c148d
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h
@@ -0,0 +1,202 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_sram.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of SRAM HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SRAM_H
+#define __STM32F4xx_HAL_SRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+  #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F446xx)
+  #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+	defined(STM32F446xx)
+/** @addtogroup SRAM
+  * @{
+  */
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Types SRAM Exported Types
+  * @{
+  */
+/**
+  * @brief  HAL SRAM State structures definition
+  */
+typedef enum
+{
+  HAL_SRAM_STATE_RESET     = 0x00,  /*!< SRAM not yet initialized or disabled           */
+  HAL_SRAM_STATE_READY     = 0x01,  /*!< SRAM initialized and ready for use             */
+  HAL_SRAM_STATE_BUSY      = 0x02,  /*!< SRAM internal process is ongoing               */
+  HAL_SRAM_STATE_ERROR     = 0x03,  /*!< SRAM error state                               */
+  HAL_SRAM_STATE_PROTECTED = 0x04   /*!< SRAM peripheral NORSRAM device write protected */
+
+}HAL_SRAM_StateTypeDef;
+
+/**
+  * @brief  SRAM handle Structure definition
+  */
+typedef struct
+{
+  FMC_NORSRAM_TypeDef           *Instance;  /*!< Register base address                        */
+
+  FMC_NORSRAM_EXTENDED_TypeDef  *Extended;  /*!< Extended mode register base address          */
+
+  FMC_NORSRAM_InitTypeDef       Init;       /*!< SRAM device control configuration parameters */
+
+  HAL_LockTypeDef               Lock;       /*!< SRAM locking object                          */
+
+  __IO HAL_SRAM_StateTypeDef    State;      /*!< SRAM device access state                     */
+
+  DMA_HandleTypeDef             *hdma;      /*!< Pointer DMA handler                          */
+
+}SRAM_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Macros SRAM Exported Macros
+  * @{
+  */
+/** @brief Reset SRAM handle state
+  * @param  __HANDLE__: SRAM handle
+  * @retval None
+  */
+#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET)
+
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SRAM_Exported_Functions
+ *  @{
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group1
+ *  @{
+ */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram);
+void              HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram);
+void              HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram);
+
+void              HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void              HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/** @addtogroup SRAM_Exported_Functions_Group2
+ *  @{
+ */
+/* I/O operation functions  *****************************************************/
+HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+/**
+  * @}
+  */
+
+/** @addtogroup SRAM_Exported_Functions_Group3
+ *  @{
+ */
+/* SRAM Control functions  ******************************************************/
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram);
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram);
+/**
+  * @}
+  */
+
+/** @addtogroup SRAM_Exported_Functions_Group4
+ *  @{
+ */
+/* SRAM State functions *********************************************************/
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+  * @}
+  */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h
new file mode 100644
index 0000000..a547eb9
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h
@@ -0,0 +1,1608 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_tim.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of TIM HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_H
+#define __STM32F4xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup TIM
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+  * @{
+  */
+
+/**
+  * @brief  TIM Time base Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Prescaler;         /*!< Specifies the prescaler value used to divide the TIM clock.
+                                   This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t CounterMode;       /*!< Specifies the counter mode.
+                                   This parameter can be a value of @ref TIM_Counter_Mode */
+
+  uint32_t Period;            /*!< Specifies the period value to be loaded into the active
+                                   Auto-Reload Register at the next update event.
+                                   This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.  */
+
+  uint32_t ClockDivision;     /*!< Specifies the clock division.
+                                   This parameter can be a value of @ref TIM_ClockDivision */
+
+  uint32_t RepetitionCounter;  /*!< Specifies the repetition counter value. Each time the RCR downcounter
+                                    reaches zero, an update event is generated and counting restarts
+                                    from the RCR value (N).
+                                    This means in PWM mode that (N+1) corresponds to:
+                                        - the number of PWM periods in edge-aligned mode
+                                        - the number of half PWM period in center-aligned mode
+                                     This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+                                     @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_Base_InitTypeDef;
+
+/**
+  * @brief  TIM Output Compare Configuration Structure definition
+  */
+
+typedef struct
+{
+  uint32_t OCMode;        /*!< Specifies the TIM mode.
+                               This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+  uint32_t Pulse;         /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+                               This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t OCPolarity;    /*!< Specifies the output polarity.
+                               This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+  uint32_t OCNPolarity;   /*!< Specifies the complementary output polarity.
+                               This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+                               @note This parameter is valid only for TIM1 and TIM8. */
+
+  uint32_t OCFastMode;   /*!< Specifies the Fast mode state.
+                               This parameter can be a value of @ref TIM_Output_Fast_State
+                               @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+  uint32_t OCIdleState;   /*!< Specifies the TIM Output Compare pin state during Idle state.
+                               This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+                               @note This parameter is valid only for TIM1 and TIM8. */
+
+  uint32_t OCNIdleState;  /*!< Specifies the TIM Output Compare pin state during Idle state.
+                               This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+                               @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+  * @brief  TIM One Pulse Mode Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t OCMode;        /*!< Specifies the TIM mode.
+                               This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+  uint32_t Pulse;         /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+                               This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t OCPolarity;    /*!< Specifies the output polarity.
+                               This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+  uint32_t OCNPolarity;   /*!< Specifies the complementary output polarity.
+                               This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+                               @note This parameter is valid only for TIM1 and TIM8. */
+
+  uint32_t OCIdleState;   /*!< Specifies the TIM Output Compare pin state during Idle state.
+                               This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+                               @note This parameter is valid only for TIM1 and TIM8. */
+
+  uint32_t OCNIdleState;  /*!< Specifies the TIM Output Compare pin state during Idle state.
+                               This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+                               @note This parameter is valid only for TIM1 and TIM8. */
+
+  uint32_t ICPolarity;    /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t ICSelection;   /*!< Specifies the input.
+                              This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint32_t ICFilter;      /*!< Specifies the input capture filter.
+                              This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+  * @brief  TIM Input Capture Configuration Structure definition
+  */
+
+typedef struct
+{
+  uint32_t  ICPolarity;   /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t ICSelection;  /*!< Specifies the input.
+                              This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint32_t ICPrescaler;  /*!< Specifies the Input Capture Prescaler.
+                              This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t ICFilter;     /*!< Specifies the input capture filter.
+                              This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+  * @brief  TIM Encoder Configuration Structure definition
+  */
+
+typedef struct
+{
+  uint32_t EncoderMode;   /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Encoder_Mode */
+
+  uint32_t IC1Polarity;   /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t IC1Selection;  /*!< Specifies the input.
+                               This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint32_t IC1Prescaler;  /*!< Specifies the Input Capture Prescaler.
+                               This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t IC1Filter;     /*!< Specifies the input capture filter.
+                               This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+  uint32_t IC2Polarity;   /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t IC2Selection;  /*!< Specifies the input.
+                              This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint32_t IC2Prescaler;  /*!< Specifies the Input Capture Prescaler.
+                               This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t IC2Filter;     /*!< Specifies the input capture filter.
+                               This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+/**
+  * @brief  Clock Configuration Handle Structure definition
+  */
+typedef struct
+{
+  uint32_t ClockSource;     /*!< TIM clock sources.
+                                 This parameter can be a value of @ref TIM_Clock_Source */
+  uint32_t ClockPolarity;   /*!< TIM clock polarity.
+                                 This parameter can be a value of @ref TIM_Clock_Polarity */
+  uint32_t ClockPrescaler;  /*!< TIM clock prescaler.
+                                 This parameter can be a value of @ref TIM_Clock_Prescaler */
+  uint32_t ClockFilter;    /*!< TIM clock filter.
+                                This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClockConfigTypeDef;
+
+/**
+  * @brief  Clear Input Configuration Handle Structure definition
+  */
+typedef struct
+{
+  uint32_t ClearInputState;      /*!< TIM clear Input state.
+                                      This parameter can be ENABLE or DISABLE */
+  uint32_t ClearInputSource;     /*!< TIM clear Input sources.
+                                      This parameter can be a value of @ref TIM_ClearInput_Source */
+  uint32_t ClearInputPolarity;   /*!< TIM Clear Input polarity.
+                                      This parameter can be a value of @ref TIM_ClearInput_Polarity */
+  uint32_t ClearInputPrescaler;  /*!< TIM Clear Input prescaler.
+                                      This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+  uint32_t ClearInputFilter;    /*!< TIM Clear Input filter.
+                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+  * @brief  TIM Slave configuration Structure definition
+  */
+typedef struct {
+  uint32_t  SlaveMode;         /*!< Slave mode selection
+                                  This parameter can be a value of @ref TIM_Slave_Mode */
+  uint32_t  InputTrigger;      /*!< Input Trigger source
+                                  This parameter can be a value of @ref TIM_Trigger_Selection */
+  uint32_t  TriggerPolarity;   /*!< Input Trigger polarity
+                                  This parameter can be a value of @ref TIM_Trigger_Polarity */
+  uint32_t  TriggerPrescaler;  /*!< Input trigger prescaler
+                                  This parameter can be a value of @ref TIM_Trigger_Prescaler */
+  uint32_t  TriggerFilter;     /*!< Input trigger filter
+                                  This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_TIM_STATE_RESET             = 0x00,    /*!< Peripheral not yet initialized or disabled  */
+  HAL_TIM_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use    */
+  HAL_TIM_STATE_BUSY              = 0x02,    /*!< An internal process is ongoing              */
+  HAL_TIM_STATE_TIMEOUT           = 0x03,    /*!< Timeout state                               */
+  HAL_TIM_STATE_ERROR             = 0x04     /*!< Reception process is ongoing                */
+}HAL_TIM_StateTypeDef;
+
+/**
+  * @brief  HAL Active channel structures definition
+  */
+typedef enum
+{
+  HAL_TIM_ACTIVE_CHANNEL_1        = 0x01,    /*!< The active channel is 1     */
+  HAL_TIM_ACTIVE_CHANNEL_2        = 0x02,    /*!< The active channel is 2     */
+  HAL_TIM_ACTIVE_CHANNEL_3        = 0x04,    /*!< The active channel is 3     */
+  HAL_TIM_ACTIVE_CHANNEL_4        = 0x08,    /*!< The active channel is 4     */
+  HAL_TIM_ACTIVE_CHANNEL_CLEARED  = 0x00     /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+  * @brief  TIM Time Base Handle Structure definition
+  */
+typedef struct
+{
+  TIM_TypeDef                 *Instance;     /*!< Register base address             */
+  TIM_Base_InitTypeDef        Init;          /*!< TIM Time Base required parameters */
+  HAL_TIM_ActiveChannel       Channel;       /*!< Active channel                    */
+  DMA_HandleTypeDef           *hdma[7];      /*!< DMA Handlers array
+                                             This array is accessed by a @ref DMA_Handle_index */
+  HAL_LockTypeDef             Lock;          /*!< Locking object                    */
+  __IO HAL_TIM_StateTypeDef   State;         /*!< TIM operation state               */
+}TIM_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants  TIM Exported Constants
+  * @{
+  */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity
+  * @{
+  */
+#define  TIM_INPUTCHANNELPOLARITY_RISING      ((uint32_t)0x00000000)            /*!< Polarity for TIx source */
+#define  TIM_INPUTCHANNELPOLARITY_FALLING     (TIM_CCER_CC1P)                   /*!< Polarity for TIx source */
+#define  TIM_INPUTCHANNELPOLARITY_BOTHEDGE    (TIM_CCER_CC1P | TIM_CCER_CC1NP)  /*!< Polarity for TIx source */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ETR_Polarity  TIM ETR Polarity
+  * @{
+  */
+#define TIM_ETRPOLARITY_INVERTED              (TIM_SMCR_ETP)                    /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED           ((uint32_t)0x0000)                /*!< Polarity for ETR source */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ETR_Prescaler  TIM ETR Prescaler
+  * @{
+  */
+#define TIM_ETRPRESCALER_DIV1                 ((uint32_t)0x0000)                /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2                 (TIM_SMCR_ETPS_0)                 /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4                 (TIM_SMCR_ETPS_1)                 /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8                 (TIM_SMCR_ETPS)                   /*!< ETR input source is divided by 8 */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Counter_Mode  TIM Counter Mode
+  * @{
+  */
+#define TIM_COUNTERMODE_UP                 ((uint32_t)0x0000)
+#define TIM_COUNTERMODE_DOWN               TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1     TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2     TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3     TIM_CR1_CMS
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+  * @{
+  */
+#define TIM_CLOCKDIVISION_DIV1                       ((uint32_t)0x0000)
+#define TIM_CLOCKDIVISION_DIV2                       (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4                       (TIM_CR1_CKD_1)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes  TIM Output Compare and PWM modes
+  * @{
+  */
+#define TIM_OCMODE_TIMING                   ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE                   (TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE                 (TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE                   (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1                     (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2                     (TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE            (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE          (TIM_CCMR1_OC1M_2)
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Fast_State  TIM Output Fast State
+  * @{
+  */
+#define TIM_OCFAST_DISABLE                ((uint32_t)0x0000)
+#define TIM_OCFAST_ENABLE                 (TIM_CCMR1_OC1FE)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_Polarity  TIM Output Compare Polarity
+  * @{
+  */
+#define TIM_OCPOLARITY_HIGH                ((uint32_t)0x0000)
+#define TIM_OCPOLARITY_LOW                 (TIM_CCER_CC1P)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_N_Polarity  TIM Output CompareN Polarity
+  * @{
+  */
+#define TIM_OCNPOLARITY_HIGH               ((uint32_t)0x0000)
+#define TIM_OCNPOLARITY_LOW                (TIM_CCER_CC1NP)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_Idle_State  TIM Output Compare Idle State
+  * @{
+  */
+#define TIM_OCIDLESTATE_SET                (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET              ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State  TIM Output Compare N Idle State
+  * @{
+  */
+#define TIM_OCNIDLESTATE_SET               (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET             ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Channel  TIM Channel
+  * @{
+  */
+#define TIM_CHANNEL_1                      ((uint32_t)0x0000)
+#define TIM_CHANNEL_2                      ((uint32_t)0x0004)
+#define TIM_CHANNEL_3                      ((uint32_t)0x0008)
+#define TIM_CHANNEL_4                      ((uint32_t)0x000C)
+#define TIM_CHANNEL_ALL                    ((uint32_t)0x0018)
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Input_Capture_Polarity  TIM Input Capture Polarity
+  * @{
+  */
+#define  TIM_ICPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING
+#define  TIM_ICPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING
+#define  TIM_ICPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Input_Capture_Selection  TIM Input Capture Selection
+  * @{
+  */
+#define TIM_ICSELECTION_DIRECTTI           (TIM_CCMR1_CC1S_0)   /*!< TIM Input 1, 2, 3 or 4 is selected to be
+                                                                     connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI         (TIM_CCMR1_CC1S_1)   /*!< TIM Input 1, 2, 3 or 4 is selected to be
+                                                                     connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC                (TIM_CCMR1_CC1S)     /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Input_Capture_Prescaler  TIM Input Capture Prescaler
+  * @{
+  */
+#define TIM_ICPSC_DIV1                     ((uint32_t)0x0000)       /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2                     (TIM_CCMR1_IC1PSC_0)     /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4                     (TIM_CCMR1_IC1PSC_1)     /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8                     (TIM_CCMR1_IC1PSC)       /*!< Capture performed once every 8 events */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+  * @{
+  */
+#define TIM_OPMODE_SINGLE                  (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE              ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+  * @{
+  */
+#define TIM_ENCODERMODE_TI1                (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2                (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12               (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Interrupt_definition  TIM Interrupt definition
+  * @{
+  */
+#define TIM_IT_UPDATE           (TIM_DIER_UIE)
+#define TIM_IT_CC1              (TIM_DIER_CC1IE)
+#define TIM_IT_CC2              (TIM_DIER_CC2IE)
+#define TIM_IT_CC3              (TIM_DIER_CC3IE)
+#define TIM_IT_CC4              (TIM_DIER_CC4IE)
+#define TIM_IT_COM              (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER          (TIM_DIER_TIE)
+#define TIM_IT_BREAK            (TIM_DIER_BIE)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Commutation_Source  TIM Commutation Source
+  * @{
+  */
+#define TIM_COMMUTATION_TRGI              (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE          ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_DMA_sources  TIM DMA sources
+  * @{
+  */
+#define TIM_DMA_UPDATE                     (TIM_DIER_UDE)
+#define TIM_DMA_CC1                        (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2                        (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3                        (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4                        (TIM_DIER_CC4DE)
+#define TIM_DMA_COM                        (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER                    (TIM_DIER_TDE)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Event_Source  TIM Event Source
+  * @{
+  */
+#define TIM_EVENTSOURCE_UPDATE              TIM_EGR_UG
+#define TIM_EVENTSOURCE_CC1                 TIM_EGR_CC1G
+#define TIM_EVENTSOURCE_CC2                 TIM_EGR_CC2G
+#define TIM_EVENTSOURCE_CC3                 TIM_EGR_CC3G
+#define TIM_EVENTSOURCE_CC4                 TIM_EGR_CC4G
+#define TIM_EVENTSOURCE_COM                 TIM_EGR_COMG
+#define TIM_EVENTSOURCE_TRIGGER             TIM_EGR_TG
+#define TIM_EVENTSOURCE_BREAK               TIM_EGR_BG
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Flag_definition  TIM Flag definition
+  * @{
+  */
+#define TIM_FLAG_UPDATE                    (TIM_SR_UIF)
+#define TIM_FLAG_CC1                       (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2                       (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3                       (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4                       (TIM_SR_CC4IF)
+#define TIM_FLAG_COM                       (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER                   (TIM_SR_TIF)
+#define TIM_FLAG_BREAK                     (TIM_SR_BIF)
+#define TIM_FLAG_CC1OF                     (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF                     (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF                     (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF                     (TIM_SR_CC4OF)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Clock_Source  TIM Clock Source
+  * @{
+  */
+#define	TIM_CLOCKSOURCE_ETRMODE2    (TIM_SMCR_ETPS_1)
+#define	TIM_CLOCKSOURCE_INTERNAL    (TIM_SMCR_ETPS_0)
+#define	TIM_CLOCKSOURCE_ITR0        ((uint32_t)0x0000)
+#define	TIM_CLOCKSOURCE_ITR1        (TIM_SMCR_TS_0)
+#define	TIM_CLOCKSOURCE_ITR2        (TIM_SMCR_TS_1)
+#define	TIM_CLOCKSOURCE_ITR3        (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define	TIM_CLOCKSOURCE_TI1ED       (TIM_SMCR_TS_2)
+#define	TIM_CLOCKSOURCE_TI1         (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define	TIM_CLOCKSOURCE_TI2         (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define	TIM_CLOCKSOURCE_ETRMODE1    (TIM_SMCR_TS)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Clock_Polarity  TIM Clock Polarity
+  * @{
+  */
+#define TIM_CLOCKPOLARITY_INVERTED           TIM_ETRPOLARITY_INVERTED          /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED        TIM_ETRPOLARITY_NONINVERTED       /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING   /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING   /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE  /*!< Polarity for TIx clock sources */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Clock_Prescaler  TIM Clock Prescaler
+  * @{
+  */
+#define TIM_CLOCKPRESCALER_DIV1              TIM_ETRPRESCALER_DIV1     /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2              TIM_ETRPRESCALER_DIV2     /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4              TIM_ETRPRESCALER_DIV4     /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8              TIM_ETRPRESCALER_DIV8     /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ClearInput_Source TIM Clear Input Source
+  * @{
+  */
+#define TIM_CLEARINPUTSOURCE_ETR           ((uint32_t)0x0001)
+#define TIM_CLEARINPUTSOURCE_NONE          ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ClearInput_Polarity  TIM Clear Input Polarity
+  * @{
+  */
+#define TIM_CLEARINPUTPOLARITY_INVERTED           TIM_ETRPOLARITY_INVERTED                    /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED        TIM_ETRPOLARITY_NONINVERTED                 /*!< Polarity for ETRx pin */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+  * @{
+  */
+#define TIM_CLEARINPUTPRESCALER_DIV1                    TIM_ETRPRESCALER_DIV1      /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2                    TIM_ETRPRESCALER_DIV2      /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4                    TIM_ETRPRESCALER_DIV4      /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8                    TIM_ETRPRESCALER_DIV8        /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
+  * @{
+  */
+#define TIM_OSSR_ENABLE 	      (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE        ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
+  * @{
+  */
+#define TIM_OSSI_ENABLE	 	    (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE            ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Lock_level  TIM Lock level
+  * @{
+  */
+#define TIM_LOCKLEVEL_OFF	   ((uint32_t)0x0000)
+#define TIM_LOCKLEVEL_1            (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2            (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3            (TIM_BDTR_LOCK)
+/**
+  * @}
+  */
+/** @defgroup TIM_Break_Input_enable_disable  TIM Break Input State
+  * @{
+  */
+#define TIM_BREAK_ENABLE          (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE         ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Break_Polarity  TIM Break Polarity
+  * @{
+  */
+#define TIM_BREAKPOLARITY_LOW        ((uint32_t)0x0000)
+#define TIM_BREAKPOLARITY_HIGH       (TIM_BDTR_BKP)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset  TIM AOE Bit State
+  * @{
+  */
+#define TIM_AUTOMATICOUTPUT_ENABLE           (TIM_BDTR_AOE)
+#define	TIM_AUTOMATICOUTPUT_DISABLE          ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+  * @{
+  */
+#define	TIM_TRGO_RESET            ((uint32_t)0x0000)
+#define	TIM_TRGO_ENABLE           (TIM_CR2_MMS_0)
+#define	TIM_TRGO_UPDATE           (TIM_CR2_MMS_1)
+#define	TIM_TRGO_OC1              ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define	TIM_TRGO_OC1REF           (TIM_CR2_MMS_2)
+#define	TIM_TRGO_OC2REF           ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define	TIM_TRGO_OC3REF           ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define	TIM_TRGO_OC4REF           ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Slave_Mode TIM Slave Mode
+  * @{
+  */
+#define TIM_SLAVEMODE_DISABLE              ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET                ((uint32_t)0x0004)
+#define TIM_SLAVEMODE_GATED                ((uint32_t)0x0005)
+#define TIM_SLAVEMODE_TRIGGER              ((uint32_t)0x0006)
+#define TIM_SLAVEMODE_EXTERNAL1            ((uint32_t)0x0007)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Master_Slave_Mode  TIM Master Slave Mode
+  * @{
+  */
+#define TIM_MASTERSLAVEMODE_ENABLE          ((uint32_t)0x0080)
+#define TIM_MASTERSLAVEMODE_DISABLE         ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Trigger_Selection  TIM Trigger Selection
+  * @{
+  */
+#define TIM_TS_ITR0                        ((uint32_t)0x0000)
+#define TIM_TS_ITR1                        ((uint32_t)0x0010)
+#define TIM_TS_ITR2                        ((uint32_t)0x0020)
+#define TIM_TS_ITR3                        ((uint32_t)0x0030)
+#define TIM_TS_TI1F_ED                     ((uint32_t)0x0040)
+#define TIM_TS_TI1FP1                      ((uint32_t)0x0050)
+#define TIM_TS_TI2FP2                      ((uint32_t)0x0060)
+#define TIM_TS_ETRF                        ((uint32_t)0x0070)
+#define TIM_TS_NONE                        ((uint32_t)0xFFFF)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+  * @{
+  */
+#define TIM_TRIGGERPOLARITY_INVERTED           TIM_ETRPOLARITY_INVERTED      /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED        TIM_ETRPOLARITY_NONINVERTED   /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING        /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING       /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE      /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+  * @{
+  */
+#define TIM_TRIGGERPRESCALER_DIV1             TIM_ETRPRESCALER_DIV1     /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2             TIM_ETRPRESCALER_DIV2     /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4             TIM_ETRPRESCALER_DIV4     /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8             TIM_ETRPRESCALER_DIV8     /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+/**
+  * @}
+  */
+
+
+/** @defgroup TIM_TI1_Selection TIM TI1 Selection
+  * @{
+  */
+#define TIM_TI1SELECTION_CH1                ((uint32_t)0x0000)
+#define TIM_TI1SELECTION_XORCOMBINATION     (TIM_CR2_TI1S)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_DMA_Base_address  TIM DMA Base address
+  * @{
+  */
+#define TIM_DMABASE_CR1                    (0x00000000)
+#define TIM_DMABASE_CR2                    (0x00000001)
+#define TIM_DMABASE_SMCR                   (0x00000002)
+#define TIM_DMABASE_DIER                   (0x00000003)
+#define TIM_DMABASE_SR                     (0x00000004)
+#define TIM_DMABASE_EGR                    (0x00000005)
+#define TIM_DMABASE_CCMR1                  (0x00000006)
+#define TIM_DMABASE_CCMR2                  (0x00000007)
+#define TIM_DMABASE_CCER                   (0x00000008)
+#define TIM_DMABASE_CNT                    (0x00000009)
+#define TIM_DMABASE_PSC                    (0x0000000A)
+#define TIM_DMABASE_ARR                    (0x0000000B)
+#define TIM_DMABASE_RCR                    (0x0000000C)
+#define TIM_DMABASE_CCR1                   (0x0000000D)
+#define TIM_DMABASE_CCR2                   (0x0000000E)
+#define TIM_DMABASE_CCR3                   (0x0000000F)
+#define TIM_DMABASE_CCR4                   (0x00000010)
+#define TIM_DMABASE_BDTR                   (0x00000011)
+#define TIM_DMABASE_DCR                    (0x00000012)
+#define TIM_DMABASE_OR                     (0x00000013)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_DMA_Burst_Length  TIM DMA Burst Length
+  * @{
+  */
+#define TIM_DMABURSTLENGTH_1TRANSFER           (0x00000000)
+#define TIM_DMABURSTLENGTH_2TRANSFERS          (0x00000100)
+#define TIM_DMABURSTLENGTH_3TRANSFERS          (0x00000200)
+#define TIM_DMABURSTLENGTH_4TRANSFERS          (0x00000300)
+#define TIM_DMABURSTLENGTH_5TRANSFERS          (0x00000400)
+#define TIM_DMABURSTLENGTH_6TRANSFERS          (0x00000500)
+#define TIM_DMABURSTLENGTH_7TRANSFERS          (0x00000600)
+#define TIM_DMABURSTLENGTH_8TRANSFERS          (0x00000700)
+#define TIM_DMABURSTLENGTH_9TRANSFERS          (0x00000800)
+#define TIM_DMABURSTLENGTH_10TRANSFERS         (0x00000900)
+#define TIM_DMABURSTLENGTH_11TRANSFERS         (0x00000A00)
+#define TIM_DMABURSTLENGTH_12TRANSFERS         (0x00000B00)
+#define TIM_DMABURSTLENGTH_13TRANSFERS         (0x00000C00)
+#define TIM_DMABURSTLENGTH_14TRANSFERS         (0x00000D00)
+#define TIM_DMABURSTLENGTH_15TRANSFERS         (0x00000E00)
+#define TIM_DMABURSTLENGTH_16TRANSFERS         (0x00000F00)
+#define TIM_DMABURSTLENGTH_17TRANSFERS         (0x00001000)
+#define TIM_DMABURSTLENGTH_18TRANSFERS         (0x00001100)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Handle_index  DMA Handle index
+  * @{
+  */
+#define TIM_DMA_ID_UPDATE                ((uint16_t) 0x0)       /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1                   ((uint16_t) 0x1)       /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2                   ((uint16_t) 0x2)       /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3                   ((uint16_t) 0x3)       /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4                   ((uint16_t) 0x4)       /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION           ((uint16_t) 0x5)       /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER               ((uint16_t) 0x6)       /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+  * @}
+  */
+
+/** @defgroup Channel_CC_State  Channel CC State
+  * @{
+  */
+#define TIM_CCx_ENABLE                   ((uint32_t)0x0001)
+#define TIM_CCx_DISABLE                  ((uint32_t)0x0000)
+#define TIM_CCxN_ENABLE                  ((uint32_t)0x0004)
+#define TIM_CCxN_DISABLE                 ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+  * @{
+  */
+/** @brief Reset TIM handle state
+  * @param  __HANDLE__: TIM handle
+  * @retval None
+  */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+  * @brief  Enable the TIM peripheral.
+  * @param  __HANDLE__: TIM handle
+  * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+  * @brief  Enable the TIM main Output.
+  * @param  __HANDLE__: TIM handle
+  * @retval None
+  */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__)             ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+
+/**
+  * @brief  Disable the TIM peripheral.
+  * @param  __HANDLE__: TIM handle
+  * @retval None
+  */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+                        do { \
+                          if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
+                          { \
+                            if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
+                            { \
+                              (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+                            } \
+                          } \
+                        } while(0)
+
+/* The Main Output of a timer instance is disabled only if all the CCx and CCxN
+   channels have been disabled */
+/**
+  * @brief  Disable the TIM main Output.
+  * @param  __HANDLE__: TIM handle
+  * @retval None
+  */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+                        do { \
+                          if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
+                          { \
+                            if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
+                            { \
+                              (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+                            } \
+                          } \
+                        } while(0)
+
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__)         ((__HANDLE__)->Instance->DIER |= (__DMA__))
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__)        ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__)          (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__)        ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__)            (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__)       ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))
+
+#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+
+#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8)) :\
+ ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12) & TIM_CCER_CC4P)))
+
+#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
+ ((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P))
+
+/**
+  * @brief  Sets the TIM Capture Compare Register value on runtime without
+  *         calling another time ConfigChannel function.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__ : TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  __COMPARE__: specifies the Capture Compare register new value.
+  * @retval None
+  */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__))
+
+/**
+  * @brief  Gets the TIM Capture Compare Register value on runtime
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__ : TIM Channel associated with the capture compare register
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: get capture/compare 1 register value
+  *            @arg TIM_CHANNEL_2: get capture/compare 2 register value
+  *            @arg TIM_CHANNEL_3: get capture/compare 3 register value
+  *            @arg TIM_CHANNEL_4: get capture/compare 4 register value
+  * @retval None
+  */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+  (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)))
+
+/**
+  * @brief  Sets the TIM Counter Register value on runtime.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __COUNTER__: specifies the Counter register new value.
+  * @retval None
+  */
+#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+  * @brief  Gets the TIM Counter Register value on runtime.
+  * @param  __HANDLE__: TIM handle.
+  * @retval None
+  */
+#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
+
+/**
+  * @brief  Sets the TIM Autoreload Register value on runtime without calling
+  *         another time any Init function.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __AUTORELOAD__: specifies the Counter register new value.
+  * @retval None
+  */
+#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__)                  \
+                        do{                                                  \
+                            (__HANDLE__)->Instance->ARR = (__AUTORELOAD__);  \
+                            (__HANDLE__)->Init.Period = (__AUTORELOAD__);    \
+                          } while(0)
+/**
+  * @brief  Gets the TIM Autoreload Register value on runtime
+  * @param  __HANDLE__: TIM handle.
+  * @retval None
+  */
+#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
+
+/**
+  * @brief  Sets the TIM Clock Division value on runtime without calling
+  *         another time any Init function.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CKD__: specifies the clock division value.
+  *          This parameter can be one of the following value:
+  *            @arg TIM_CLOCKDIVISION_DIV1
+  *            @arg TIM_CLOCKDIVISION_DIV2
+  *            @arg TIM_CLOCKDIVISION_DIV4
+  * @retval None
+  */
+#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
+                        do{                                                             \
+                              (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD);  \
+                              (__HANDLE__)->Instance->CR1 |= (__CKD__);                 \
+                              (__HANDLE__)->Init.ClockDivision = (__CKD__);             \
+                          } while(0)
+/**
+  * @brief  Gets the TIM Clock Division value on runtime
+  * @param  __HANDLE__: TIM handle.
+  * @retval None
+  */
+#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+  * @brief  Sets the TIM Input Capture prescaler on runtime without calling
+  *         another time HAL_TIM_IC_ConfigChannel() function.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__ : TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  __ICPSC__: specifies the Input Capture4 prescaler new value.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPSC_DIV1: no prescaler
+  *            @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+  *            @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+  *            @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+  * @retval None
+  */
+#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
+                        do{                                                    \
+                              TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__));  \
+                              TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+                          } while(0)
+
+/**
+  * @brief  Gets the TIM Input Capture prescaler on runtime
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__ : TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+  *            @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+  *            @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+  *            @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+  * @retval None
+  */
+#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__)  \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+   (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
+
+/**
+  * @brief  Set the Update Request Source (URS) bit of the TIMx_CR1 register
+  * @param  __HANDLE__: TIM handle.
+  * @note  When the USR bit of the TIMx_CR1 register is set, only counter
+  *        overflow/underflow generates an update interrupt or DMA request (if
+  *        enabled)
+  * @retval None
+  */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) \
+    ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS))
+
+/**
+  * @brief  Reset the Update Request Source (URS) bit of the TIMx_CR1 register
+  * @param  __HANDLE__: TIM handle.
+  * @note  When the USR bit of the TIMx_CR1 register is reset, any of the
+  *        following events generate an update interrupt or DMA request (if
+  *        enabled):
+  *          � Counter overflow/underflow
+  *          � Setting the UG bit
+  *          � Update generation through the slave mode controller
+  * @retval None
+  */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) \
+      ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
+
+/**
+  * @brief  Sets the TIM Capture x input polarity on runtime.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__: TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  __POLARITY__: Polarity for TIx source
+  *            @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
+  *            @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
+  *            @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
+  * @note  The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized  for TIM Channel 4.
+  * @retval None
+  */
+#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__)                          \
+                       do{                                                                            \
+                           TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__));               \
+                           TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
+                         }while(0)
+/**
+  * @}
+  */
+
+/* Include TIM HAL Extension module */
+#include "stm32f4xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group1
+  * @{
+  */
+
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group2
+  * @{
+  */
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group3
+  * @{
+  */
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group4
+  * @{
+  */
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group5
+  * @{
+  */
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group6
+  * @{
+  */
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim,  TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group7
+  * @{
+  */
+/* Interrupt Handler functions  **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group8
+  * @{
+  */
+/* Control functions  *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel,  uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+                                              uint32_t  *BurstBuffer, uint32_t  BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+                                              uint32_t  *BurstBuffer, uint32_t  BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group9
+  * @{
+  */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group10
+  * @{
+  */
+/* Peripheral State functions  **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+  * @{
+  */
+
+/** @defgroup TIM_IS_TIM_Definitions TIM Private macros to check input parameters
+  * @{
+  */
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP)              || \
+                                   ((MODE) == TIM_COUNTERMODE_DOWN)            || \
+                                   ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1)  || \
+                                   ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2)  || \
+                                   ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
+
+#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
+                                       ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
+                                       ((DIV) == TIM_CLOCKDIVISION_DIV4))
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+                               ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING)       || \
+                          ((MODE) == TIM_OCMODE_ACTIVE)           || \
+                          ((MODE) == TIM_OCMODE_INACTIVE)         || \
+                          ((MODE) == TIM_OCMODE_TOGGLE)           || \
+                          ((MODE) == TIM_OCMODE_FORCED_ACTIVE)    || \
+                          ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+
+#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
+                                  ((STATE) == TIM_OCFAST_ENABLE))
+
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
+                                      ((POLARITY) == TIM_OCPOLARITY_LOW))
+
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
+                                       ((POLARITY) == TIM_OCNPOLARITY_LOW))
+
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
+                                    ((STATE) == TIM_OCIDLESTATE_RESET))
+
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
+                                    ((STATE) == TIM_OCNIDLESTATE_RESET))
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                  ((CHANNEL) == TIM_CHANNEL_2) || \
+                                  ((CHANNEL) == TIM_CHANNEL_3) || \
+                                  ((CHANNEL) == TIM_CHANNEL_4) || \
+                                  ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                      ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                                ((CHANNEL) == TIM_CHANNEL_2) || \
+                                                ((CHANNEL) == TIM_CHANNEL_3))
+
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING)   || \
+                                      ((POLARITY) == TIM_ICPOLARITY_FALLING)  || \
+                                      ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
+
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
+                                        ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
+                                        ((SELECTION) == TIM_ICSELECTION_TRC))
+
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+                                        ((PRESCALER) == TIM_ICPSC_DIV2) || \
+                                        ((PRESCALER) == TIM_ICPSC_DIV4) || \
+                                        ((PRESCALER) == TIM_ICPSC_DIV8))
+
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
+                               ((MODE) == TIM_OPMODE_REPETITIVE))
+
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FF) == 0x00000000) && ((SOURCE) != 0x00000000))
+
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
+                                   ((MODE) == TIM_ENCODERMODE_TI2) || \
+                                   ((MODE) == TIM_ENCODERMODE_TI12))
+
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000))
+
+#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
+                                   ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
+                                   ((CLOCK) == TIM_CLOCKSOURCE_ITR0)     || \
+                                   ((CLOCK) == TIM_CLOCKSOURCE_ITR1)     || \
+                                   ((CLOCK) == TIM_CLOCKSOURCE_ITR2)     || \
+                                   ((CLOCK) == TIM_CLOCKSOURCE_ITR3)     || \
+                                   ((CLOCK) == TIM_CLOCKSOURCE_TI1ED)    || \
+                                   ((CLOCK) == TIM_CLOCKSOURCE_TI1)      || \
+                                   ((CLOCK) == TIM_CLOCKSOURCE_TI2)      || \
+                                   ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
+
+#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED)    || \
+                                        ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+                                        ((POLARITY) == TIM_CLOCKPOLARITY_RISING)      || \
+                                        ((POLARITY) == TIM_CLOCKPOLARITY_FALLING)     || \
+                                        ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
+
+#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
+                                          ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
+                                          ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
+                                          ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
+
+#define IS_TIM_CLOCKFILTER(ICFILTER)      ((ICFILTER) <= 0xF)
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE)  (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+                                         ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+
+#define IS_TIM_CLEARINPUT_POLARITY(POLARITY)   (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+                                               ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+
+#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER)   (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+                                                 ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+                                                 ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+                                                 ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
+
+#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
+                                  ((STATE) == TIM_OSSR_DISABLE))
+
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
+                                  ((STATE) == TIM_OSSI_DISABLE))
+
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
+                                  ((LEVEL) == TIM_LOCKLEVEL_1) || \
+                                  ((LEVEL) == TIM_LOCKLEVEL_2) || \
+                                  ((LEVEL) == TIM_LOCKLEVEL_3))
+
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
+                                   ((STATE) == TIM_BREAK_DISABLE))
+
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
+                                         ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+                                              ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
+
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
+                                    ((SOURCE) == TIM_TRGO_ENABLE) || \
+                                    ((SOURCE) == TIM_TRGO_UPDATE) || \
+                                    ((SOURCE) == TIM_TRGO_OC1) || \
+                                    ((SOURCE) == TIM_TRGO_OC1REF) || \
+                                    ((SOURCE) == TIM_TRGO_OC2REF) || \
+                                    ((SOURCE) == TIM_TRGO_OC3REF) || \
+                                    ((SOURCE) == TIM_TRGO_OC4REF))
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+                                 ((MODE) == TIM_SLAVEMODE_GATED) || \
+                                 ((MODE) == TIM_SLAVEMODE_RESET) || \
+                                 ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+                                 ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
+                                 ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
+
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+                                             ((SELECTION) == TIM_TS_ITR1) || \
+                                             ((SELECTION) == TIM_TS_ITR2) || \
+                                             ((SELECTION) == TIM_TS_ITR3) || \
+                                             ((SELECTION) == TIM_TS_TI1F_ED) || \
+                                             ((SELECTION) == TIM_TS_TI1FP1) || \
+                                             ((SELECTION) == TIM_TS_TI2FP2) || \
+                                             ((SELECTION) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+                                                           ((SELECTION) == TIM_TS_ITR1) || \
+                                                           ((SELECTION) == TIM_TS_ITR2) || \
+                                                           ((SELECTION) == TIM_TS_ITR3) || \
+                                                           ((SELECTION) == TIM_TS_NONE))
+#define IS_TIM_TRIGGERPOLARITY(POLARITY)     (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED   ) || \
+                                              ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+                                              ((POLARITY) == TIM_TRIGGERPOLARITY_RISING     ) || \
+                                              ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING    ) || \
+                                              ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE   ))
+
+#define IS_TIM_TRIGGERPRESCALER(PRESCALER)  (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
+                                             ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
+                                             ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
+                                             ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
+
+#define IS_TIM_TRIGGERFILTER(ICFILTER)     ((ICFILTER) <= 0xF)
+
+#define IS_TIM_TI1SELECTION(TI1SELECTION)   (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
+                                             ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
+
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \
+                               ((BASE) == TIM_DMABASE_CR2) || \
+                               ((BASE) == TIM_DMABASE_SMCR) || \
+                               ((BASE) == TIM_DMABASE_DIER) || \
+                               ((BASE) == TIM_DMABASE_SR) || \
+                               ((BASE) == TIM_DMABASE_EGR) || \
+                               ((BASE) == TIM_DMABASE_CCMR1) || \
+                               ((BASE) == TIM_DMABASE_CCMR2) || \
+                               ((BASE) == TIM_DMABASE_CCER) || \
+                               ((BASE) == TIM_DMABASE_CNT) || \
+                               ((BASE) == TIM_DMABASE_PSC) || \
+                               ((BASE) == TIM_DMABASE_ARR) || \
+                               ((BASE) == TIM_DMABASE_RCR) || \
+                               ((BASE) == TIM_DMABASE_CCR1) || \
+                               ((BASE) == TIM_DMABASE_CCR2) || \
+                               ((BASE) == TIM_DMABASE_CCR3) || \
+                               ((BASE) == TIM_DMABASE_CCR4) || \
+                               ((BASE) == TIM_DMABASE_BDTR) || \
+                               ((BASE) == TIM_DMABASE_DCR) || \
+                               ((BASE) == TIM_DMABASE_OR))
+
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABURSTLENGTH_1TRANSFER) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
+                                   ((LENGTH) == TIM_DMABURSTLENGTH_18TRANSFERS))
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Mask_Definitions TIM Mask Definition
+  * @{
+  */
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+   channels have been disabled */
+#define TIM_CCER_CCxE_MASK  ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIM_Private_Functions TIM Private Functions
+  * @{
+  */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMAError(DMA_HandleTypeDef *hdma);
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h
new file mode 100644
index 0000000..2b6c184
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h
@@ -0,0 +1,325 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_tim_ex.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of TIM HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_EX_H
+#define __STM32F4xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup TIMEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Exported Types
+  * @{
+  */
+
+/**
+  * @brief  TIM Hall sensor Configuration Structure definition
+  */
+
+typedef struct
+{
+
+  uint32_t IC1Polarity;            /*!< Specifies the active edge of the input signal.
+                                        This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t IC1Prescaler;        /*!< Specifies the Input Capture Prescaler.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t IC1Filter;           /*!< Specifies the input capture filter.
+                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+  uint32_t Commutation_Delay;  /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+                                    This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+/**
+  * @brief  TIM Master configuration Structure definition
+  */
+typedef struct {
+  uint32_t  MasterOutputTrigger;   /*!< Trigger output (TRGO) selection.
+                                      This parameter can be a value of @ref TIM_Master_Mode_Selection */
+  uint32_t  MasterSlaveMode;       /*!< Master/slave mode selection.
+                                      This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+  * @brief  TIM Break and Dead time configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t OffStateRunMode;            /*!< TIM off state in run mode.
+                                         This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+  uint32_t OffStateIDLEMode;          /*!< TIM off state in IDLE mode.
+                                         This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+  uint32_t LockLevel;                     /*!< TIM Lock level.
+                                         This parameter can be a value of @ref TIM_Lock_level */
+  uint32_t DeadTime;                     /*!< TIM dead Time.
+                                         This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+  uint32_t BreakState;                   /*!< TIM Break State.
+                                         This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+  uint32_t BreakPolarity;                 /*!< TIM Break input polarity.
+                                         This parameter can be a value of @ref TIM_Break_Polarity */
+  uint32_t AutomaticOutput;               /*!< TIM Automatic Output Enable state.
+                                         This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+}TIM_BreakDeadTimeConfigTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants  TIM Exported Constants
+  * @{
+  */
+
+/** @defgroup TIMEx_Remap  TIM Remap
+  * @{
+  */
+#define TIM_TIM2_TIM8_TRGO                     (0x00000000)
+#define TIM_TIM2_ETH_PTP                       (0x00000400)
+#define TIM_TIM2_USBFS_SOF                     (0x00000800)
+#define TIM_TIM2_USBHS_SOF                     (0x00000C00)
+#define TIM_TIM5_GPIO                          (0x00000000)
+#define TIM_TIM5_LSI                           (0x00000040)
+#define TIM_TIM5_LSE                           (0x00000080)
+#define TIM_TIM5_RTC                           (0x000000C0)
+#define TIM_TIM11_GPIO                         (0x00000000)
+#define TIM_TIM11_HSE                          (0x00000002)
+
+#if defined (STM32F446xx)
+#define TIM_TIM11_SPDIFRX                        (0x00000001)
+#endif /* STM32F446xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1
+  * @{
+  */
+/*  Timer Hall Sensor functions  **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2
+  * @{
+  */
+/*  Timer Complementary Output Compare functions  *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3
+  * @{
+  */
+/*  Timer Complementary PWM functions  ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4
+  * @{
+  */
+/*  Timer Complementary One Pulse functions  **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5
+  * @{
+  */
+/* Extension Control functions  ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6
+  * @{
+  */
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7
+  * @{
+  */
+/* Extension Peripheral State functions  **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIM Private Macros
+  * @{
+  */
+#if defined (STM32F446xx)
+#define IS_TIM_REMAP(TIM_REMAP)   (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
+                                  ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
+                                  ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
+                                  ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
+                                  ((TIM_REMAP) == TIM_TIM5_GPIO)||\
+                                  ((TIM_REMAP) == TIM_TIM5_LSI)||\
+                                  ((TIM_REMAP) == TIM_TIM5_LSE)||\
+                                  ((TIM_REMAP) == TIM_TIM5_RTC)||\
+                                  ((TIM_REMAP) == TIM_TIM11_GPIO)||\
+                                  ((TIM_REMAP) == TIM_TIM11_SPDIFRX)||\
+                                  ((TIM_REMAP) == TIM_TIM11_HSE))
+#else
+#define IS_TIM_REMAP(TIM_REMAP)   (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
+                                  ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
+                                  ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
+                                  ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
+                                  ((TIM_REMAP) == TIM_TIM5_GPIO)||\
+                                  ((TIM_REMAP) == TIM_TIM5_LSI)||\
+                                  ((TIM_REMAP) == TIM_TIM5_LSE)||\
+                                  ((TIM_REMAP) == TIM_TIM5_RTC)||\
+                                  ((TIM_REMAP) == TIM_TIM11_GPIO)||\
+                                  ((TIM_REMAP) == TIM_TIM11_HSE))
+#endif /* STM32F446xx */
+
+
+#define IS_TIM_DEADTIME(DEADTIME)      ((DEADTIME) <= 0xFF)
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIM Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h
new file mode 100644
index 0000000..8e740bc
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h
@@ -0,0 +1,722 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_uart.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of UART HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_UART_H
+#define __STM32F4xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup UART
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Types UART Exported Types
+  * @{
+  */
+
+/**
+  * @brief UART Init Structure definition
+  */
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< This member configures the UART communication baud rate.
+                                           The baud rate is computed using the following formula:
+                                           - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate)))
+                                           - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
+                                           Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
+
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter can be a value of @ref UART_Word_Length */
+
+  uint32_t StopBits;                  /*!< Specifies the number of stop bits transmitted.
+                                           This parameter can be a value of @ref UART_Stop_Bits */
+
+  uint32_t Parity;                    /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref UART_Parity
+                                           @note When parity is enabled, the computed parity is inserted
+                                                 at the MSB position of the transmitted data (9th bit when
+                                                 the word length is set to 9 data bits; 8th bit when the
+                                                 word length is set to 8 data bits). */
+
+  uint32_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref UART_Mode */
+
+  uint32_t HwFlowCtl;                 /*!< Specifies whether the hardware flow control mode is enabled
+                                           or disabled.
+                                           This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+  uint32_t OverSampling;              /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+                                           This parameter can be a value of @ref UART_Over_Sampling */
+}UART_InitTypeDef;
+
+/**
+  * @brief HAL UART State structures definition
+  */
+typedef enum
+{
+  HAL_UART_STATE_RESET             = 0x00,    /*!< Peripheral is not yet Initialized                  */
+  HAL_UART_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use           */
+  HAL_UART_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing                     */
+  HAL_UART_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing               */
+  HAL_UART_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing                  */
+  HAL_UART_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission and Reception process is ongoing */
+  HAL_UART_STATE_TIMEOUT           = 0x03,    /*!< Timeout state                                      */
+  HAL_UART_STATE_ERROR             = 0x04     /*!< Error                                              */
+}HAL_UART_StateTypeDef;
+
+/**
+  * @brief  UART handle Structure definition
+  */
+typedef struct
+{
+  USART_TypeDef                 *Instance;        /*!< UART registers base address        */
+
+  UART_InitTypeDef              Init;             /*!< UART communication parameters      */
+
+  uint8_t                       *pTxBuffPtr;      /*!< Pointer to UART Tx transfer Buffer */
+
+  uint16_t                      TxXferSize;       /*!< UART Tx Transfer size              */
+
+  uint16_t                      TxXferCount;      /*!< UART Tx Transfer Counter           */
+
+  uint8_t                       *pRxBuffPtr;      /*!< Pointer to UART Rx transfer Buffer */
+
+  uint16_t                      RxXferSize;       /*!< UART Rx Transfer size              */
+
+  uint16_t                      RxXferCount;      /*!< UART Rx Transfer Counter           */
+
+  DMA_HandleTypeDef             *hdmatx;          /*!< UART Tx DMA Handle parameters      */
+
+  DMA_HandleTypeDef             *hdmarx;          /*!< UART Rx DMA Handle parameters      */
+
+  HAL_LockTypeDef               Lock;             /*!< Locking object                     */
+
+  __IO HAL_UART_StateTypeDef    State;            /*!< UART communication state           */
+
+  __IO uint32_t                 ErrorCode;        /*!< UART Error code                    */
+
+}UART_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants UART Exported constants
+  * @{
+  */
+
+/** @defgroup UART_Error_Code UART Error Code
+  * @brief    UART Error Code
+  * @{
+  */
+#define HAL_UART_ERROR_NONE         ((uint32_t)0x00000000)   /*!< No error            */
+#define HAL_UART_ERROR_PE           ((uint32_t)0x00000001)   /*!< Parity error        */
+#define HAL_UART_ERROR_NE           ((uint32_t)0x00000002)   /*!< Noise error         */
+#define HAL_UART_ERROR_FE           ((uint32_t)0x00000004)   /*!< Frame error         */
+#define HAL_UART_ERROR_ORE          ((uint32_t)0x00000008)   /*!< Overrun error       */
+#define HAL_UART_ERROR_DMA          ((uint32_t)0x00000010)   /*!< DMA transfer error  */
+/**
+  * @}
+  */
+
+/** @defgroup UART_Word_Length UART Word Length
+  * @{
+  */
+#define UART_WORDLENGTH_8B                  ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Stop_Bits UART Number of Stop Bits
+  * @{
+  */
+#define UART_STOPBITS_1                     ((uint32_t)0x00000000)
+#define UART_STOPBITS_2                     ((uint32_t)USART_CR2_STOP_1)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Parity UART Parity
+  * @{
+  */
+#define UART_PARITY_NONE                    ((uint32_t)0x00000000)
+#define UART_PARITY_EVEN                    ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD                     ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+  * @}
+  */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+  * @{
+  */
+#define UART_HWCONTROL_NONE                  ((uint32_t)0x00000000)
+#define UART_HWCONTROL_RTS                   ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS                   ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS               ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+/**
+  * @}
+  */
+
+/** @defgroup UART_Mode UART Transfer Mode
+  * @{
+  */
+#define UART_MODE_RX                        ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX                        ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX                     ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+  * @}
+  */
+
+ /** @defgroup UART_State UART State
+  * @{
+  */
+#define UART_STATE_DISABLE                  ((uint32_t)0x00000000)
+#define UART_STATE_ENABLE                   ((uint32_t)USART_CR1_UE)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+  * @{
+  */
+#define UART_OVERSAMPLING_16                    ((uint32_t)0x00000000)
+#define UART_OVERSAMPLING_8                     ((uint32_t)USART_CR1_OVER8)
+/**
+  * @}
+  */
+
+/** @defgroup UART_LIN_Break_Detection_Length  UART LIN Break Detection Length
+  * @{
+  */
+#define UART_LINBREAKDETECTLENGTH_10B      ((uint32_t)0x00000000)
+#define UART_LINBREAKDETECTLENGTH_11B      ((uint32_t)0x00000020)
+/**
+  * @}
+  */
+
+/** @defgroup UART_WakeUp_functions  UART Wakeup Functions
+  * @{
+  */
+#define UART_WAKEUPMETHOD_IDLELINE                ((uint32_t)0x00000000)
+#define UART_WAKEUPMETHOD_ADDRESSMARK             ((uint32_t)0x00000800)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Flags   UART FLags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the SR register
+  * @{
+  */
+#define UART_FLAG_CTS                       ((uint32_t)USART_SR_CTS)
+#define UART_FLAG_LBD                       ((uint32_t)USART_SR_LBD)
+#define UART_FLAG_TXE                       ((uint32_t)USART_SR_TXE)
+#define UART_FLAG_TC                        ((uint32_t)USART_SR_TC)
+#define UART_FLAG_RXNE                      ((uint32_t)USART_SR_RXNE)
+#define UART_FLAG_IDLE                      ((uint32_t)USART_SR_IDLE)
+#define UART_FLAG_ORE                       ((uint32_t)USART_SR_ORE)
+#define UART_FLAG_NE                        ((uint32_t)USART_SR_NE)
+#define UART_FLAG_FE                        ((uint32_t)USART_SR_FE)
+#define UART_FLAG_PE                        ((uint32_t)USART_SR_PE)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Interrupt_definition  UART Interrupt Definitions
+  *        Elements values convention: 0xY000XXXX
+  *           - XXXX  : Interrupt mask (16 bits) in the Y register
+  *           - Y  : Interrupt source register (2bits)
+  *                 - 0001: CR1 register
+  *                 - 0010: CR2 register
+  *                 - 0011: CR3 register
+  *
+  * @{
+  */
+
+#define UART_IT_PE                       ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_PEIE))
+#define UART_IT_TXE                      ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TXEIE))
+#define UART_IT_TC                       ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TCIE))
+#define UART_IT_RXNE                     ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE))
+#define UART_IT_IDLE                     ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE))
+
+#define UART_IT_LBD                      ((uint32_t)(UART_CR2_REG_INDEX << 28 | USART_CR2_LBDIE))
+
+#define UART_IT_CTS                      ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_CTSIE))
+#define UART_IT_ERR                      ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_EIE))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros UART Exported Macros
+  * @{
+  */
+
+/** @brief Reset UART handle state
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
+
+/** @brief  Flushes the UART DR register
+  * @param  __HANDLE__: specifies the UART Handle.
+  */
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief  Checks whether the specified UART flag is set or not.
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg UART_FLAG_CTS:  CTS Change flag (not available for UART4 and UART5)
+  *            @arg UART_FLAG_LBD:  LIN Break detection flag
+  *            @arg UART_FLAG_TXE:  Transmit data register empty flag
+  *            @arg UART_FLAG_TC:   Transmission Complete flag
+  *            @arg UART_FLAG_RXNE: Receive data register not empty flag
+  *            @arg UART_FLAG_IDLE: Idle Line detection flag
+  *            @arg UART_FLAG_ORE:  Overrun Error flag
+  *            @arg UART_FLAG_NE:   Noise Error flag
+  *            @arg UART_FLAG_FE:   Framing Error flag
+  *            @arg UART_FLAG_PE:   Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clears the specified UART pending flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @param  __FLAG__: specifies the flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg UART_FLAG_CTS:  CTS Change flag (not available for UART4 and UART5).
+  *            @arg UART_FLAG_LBD:  LIN Break detection flag.
+  *            @arg UART_FLAG_TC:   Transmission Complete flag.
+  *            @arg UART_FLAG_RXNE: Receive data register not empty flag.
+  *
+  * @note   PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
+  *          error) and IDLE (Idle line detected) flags are cleared by software
+  *          sequence: a read operation to USART_SR register followed by a read
+  *          operation to USART_DR register.
+  * @note   RXNE flag can be also cleared by a read to the USART_DR register.
+  * @note   TC flag can be also cleared by software sequence: a read operation to
+  *          USART_SR register followed by a write operation to USART_DR register.
+  * @note   TXE flag is cleared only by a write to the USART_DR register.
+  *
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief  Clear the UART PE pending flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__)     \
+  do{                                           \
+    __IO uint32_t tmpreg;                       \
+    tmpreg = (__HANDLE__)->Instance->SR;        \
+    tmpreg = (__HANDLE__)->Instance->DR;        \
+    UNUSED(tmpreg);                             \
+  } while(0)
+
+/** @brief  Clear the UART FE pending flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the UART NE pending flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the UART ORE pending flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the UART IDLE pending flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Enable the specified UART interrupt.
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @param  __INTERRUPT__: specifies the UART interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg UART_IT_CTS:  CTS change interrupt
+  *            @arg UART_IT_LBD:  LIN Break detection interrupt
+  *            @arg UART_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg UART_IT_TC:   Transmission complete interrupt
+  *            @arg UART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg UART_IT_IDLE: Idle line detection interrupt
+  *            @arg UART_IT_PE:   Parity Error interrupt
+  *            @arg UART_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define UART_IT_MASK  ((uint32_t)0x0000FFFF)
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+                                                           (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |=  ((__INTERRUPT__) & UART_IT_MASK)): \
+                                                        ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
+/** @brief  Disable the specified UART interrupt.
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @param  __INTERRUPT__: specifies the UART interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg UART_IT_CTS:  CTS change interrupt
+  *            @arg UART_IT_LBD:  LIN Break detection interrupt
+  *            @arg UART_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg UART_IT_TC:   Transmission complete interrupt
+  *            @arg UART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg UART_IT_IDLE: Idle line detection interrupt
+  *            @arg UART_IT_PE:   Parity Error interrupt
+  *            @arg UART_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+                                                           (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+                                                        ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
+
+/** @brief  Checks whether the specified UART interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+  *         UART peripheral.
+  * @param  __IT__: specifies the UART interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+  *            @arg UART_IT_LBD: LIN Break detection interrupt
+  *            @arg UART_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg UART_IT_TC:  Transmission complete interrupt
+  *            @arg UART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg UART_IT_IDLE: Idle line detection interrupt
+  *            @arg USART_IT_ERR: Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
+                                                      (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
+
+/** @brief  Enable CTS flow control
+  *         This macro allows to enable CTS hardware flow control for a given UART instance,
+  *         without need to call HAL_UART_Init() function.
+  *         As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+  * @note   As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+  *         for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+  *           - UART instance should have already been initialised (through call of HAL_UART_Init() )
+  *           - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+  *             and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         The Handle Instance can be USART1, USART2 or LPUART.
+  * @retval None
+  */
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__)        \
+  do{                                                      \
+    SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE);  \
+    (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE;        \
+  } while(0)
+
+/** @brief  Disable CTS flow control
+  *         This macro allows to disable CTS hardware flow control for a given UART instance,
+  *         without need to call HAL_UART_Init() function.
+  *         As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+  * @note   As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+  *         for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+  *           - UART instance should have already been initialised (through call of HAL_UART_Init() )
+  *           - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+  *             and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         The Handle Instance can be USART1, USART2 or LPUART.
+  * @retval None
+  */
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__)        \
+  do{                                                       \
+    CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+    (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE);      \
+  } while(0)
+
+/** @brief  Enable RTS flow control
+  *         This macro allows to enable RTS hardware flow control for a given UART instance,
+  *         without need to call HAL_UART_Init() function.
+  *         As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+  * @note   As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+  *         for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+  *           - UART instance should have already been initialised (through call of HAL_UART_Init() )
+  *           - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+  *             and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         The Handle Instance can be USART1, USART2 or LPUART.
+  * @retval None
+  */
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__)       \
+  do{                                                     \
+    SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+    (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE;       \
+  } while(0)
+
+/** @brief  Disable RTS flow control
+  *         This macro allows to disable RTS hardware flow control for a given UART instance,
+  *         without need to call HAL_UART_Init() function.
+  *         As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+  * @note   As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+  *         for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+  *           - UART instance should have already been initialised (through call of HAL_UART_Init() )
+  *           - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+  *             and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         The Handle Instance can be USART1, USART2 or LPUART.
+  * @retval None
+  */
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__)       \
+  do{                                                      \
+    CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+    (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE);     \
+  } while(0)
+
+/** @brief  macros to enables the UART's one bit sample method
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief  macros to disables the UART's one bit sample method
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief  Enable UART
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_ENABLE(__HANDLE__)               ((__HANDLE__)->Instance->CR1 |=  USART_CR1_UE)
+
+/** @brief  Disable UART
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_DISABLE(__HANDLE__)              ((__HANDLE__)->Instance->CR1 &=  ~USART_CR1_UE)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UART_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup UART_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+/**
+  * @}
+  */
+
+/** @addtogroup UART_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+/**
+  * @}
+  */
+
+/** @addtogroup UART_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control functions  ************************************************/
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+/**
+  * @}
+  */
+
+/** @addtogroup UART_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral State functions  **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t              HAL_UART_GetError(UART_HandleTypeDef *huart);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup UART_Private_Constants UART Private Constants
+  * @{
+  */
+/** @brief UART interruptions flag mask
+  *
+  */
+#define UART_CR1_REG_INDEX               1
+#define UART_CR2_REG_INDEX               2
+#define UART_CR3_REG_INDEX               3
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup UART_Private_Macros UART Private Macros
+  * @{
+  */
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+                                     ((LENGTH) == UART_WORDLENGTH_9B))
+#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+                                    ((STOPBITS) == UART_STOPBITS_2))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+                                ((PARITY) == UART_PARITY_EVEN) || \
+                                ((PARITY) == UART_PARITY_ODD))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+                              (((CONTROL) == UART_HWCONTROL_NONE) || \
+                               ((CONTROL) == UART_HWCONTROL_RTS) || \
+                               ((CONTROL) == UART_HWCONTROL_CTS) || \
+                               ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+#define IS_UART_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+                              ((STATE) == UART_STATE_ENABLE))
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+                                        ((SAMPLING) == UART_OVERSAMPLING_8))
+#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16))
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+                                                 ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
+                                      ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
+#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
+
+#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_)            (((_PCLK_)*25)/(4*(_BAUD_)))
+#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_)        (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100)
+#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_)        (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_)            ((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4)|(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_)             (((_PCLK_)*25)/(2*(_BAUD_)))
+#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_)         (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100)
+#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_)         (((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_)             ((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4)|(UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x0F))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup UART_Private_Functions UART Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_usart.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_usart.h
new file mode 100644
index 0000000..2333f67
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_usart.h
@@ -0,0 +1,588 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_usart.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of USART HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_USART_H
+#define __STM32F4xx_HAL_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup USART
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Types USART Exported Types
+  * @{
+  */
+
+/**
+  * @brief USART Init Structure definition
+  */
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< This member configures the Usart communication baud rate.
+                                           The baud rate is computed using the following formula:
+                                           - IntegerDivider = ((PCLKx) / (8 * (husart->Init.BaudRate)))
+                                           - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter can be a value of @ref USART_Word_Length */
+
+  uint32_t StopBits;                  /*!< Specifies the number of stop bits transmitted.
+                                           This parameter can be a value of @ref USART_Stop_Bits */
+
+  uint32_t Parity;                   /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref USART_Parity
+                                           @note When parity is enabled, the computed parity is inserted
+                                                 at the MSB position of the transmitted data (9th bit when
+                                                 the word length is set to 9 data bits; 8th bit when the
+                                                 word length is set to 8 data bits). */
+
+  uint32_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref USART_Mode */
+
+  uint32_t CLKPolarity;               /*!< Specifies the steady state of the serial clock.
+                                           This parameter can be a value of @ref USART_Clock_Polarity */
+
+  uint32_t CLKPhase;                  /*!< Specifies the clock transition on which the bit capture is made.
+                                           This parameter can be a value of @ref USART_Clock_Phase */
+
+  uint32_t CLKLastBit;                /*!< Specifies whether the clock pulse corresponding to the last transmitted
+                                           data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+                                           This parameter can be a value of @ref USART_Last_Bit */
+}USART_InitTypeDef;
+
+/**
+  * @brief HAL State structures definition
+  */
+typedef enum
+{
+  HAL_USART_STATE_RESET             = 0x00,    /*!< Peripheral is not yet Initialized   */
+  HAL_USART_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use */
+  HAL_USART_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing */
+  HAL_USART_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing */
+  HAL_USART_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing */
+  HAL_USART_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission Reception process is ongoing */
+  HAL_USART_STATE_TIMEOUT           = 0x03,    /*!< Timeout state */
+  HAL_USART_STATE_ERROR             = 0x04     /*!< Error */
+}HAL_USART_StateTypeDef;
+
+/**
+  * @brief  USART handle Structure definition
+  */
+typedef struct
+{
+  USART_TypeDef                 *Instance;        /* USART registers base address        */
+
+  USART_InitTypeDef             Init;             /* Usart communication parameters      */
+
+  uint8_t                       *pTxBuffPtr;      /* Pointer to Usart Tx transfer Buffer */
+
+  uint16_t                      TxXferSize;       /* Usart Tx Transfer size              */
+
+  __IO uint16_t                 TxXferCount;      /* Usart Tx Transfer Counter           */
+
+  uint8_t                       *pRxBuffPtr;      /* Pointer to Usart Rx transfer Buffer */
+
+  uint16_t                      RxXferSize;       /* Usart Rx Transfer size              */
+
+  __IO uint16_t                 RxXferCount;      /* Usart Rx Transfer Counter           */
+
+  DMA_HandleTypeDef             *hdmatx;          /* Usart Tx DMA Handle parameters      */
+
+  DMA_HandleTypeDef             *hdmarx;          /* Usart Rx DMA Handle parameters      */
+
+  HAL_LockTypeDef                Lock;            /* Locking object                      */
+
+  __IO HAL_USART_StateTypeDef    State;           /* Usart communication state           */
+
+  __IO uint32_t                  ErrorCode;       /* USART Error code                    */
+
+}USART_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_Exported_Constants USART Exported Constants
+  * @{
+  */
+
+/** @defgroup USART_Error_Code USART Error Code
+  * @brief    USART Error Code
+  * @{
+  */
+#define HAL_USART_ERROR_NONE         ((uint32_t)0x00000000)   /*!< No error            */
+#define HAL_USART_ERROR_PE           ((uint32_t)0x00000001)   /*!< Parity error        */
+#define HAL_USART_ERROR_NE           ((uint32_t)0x00000002)   /*!< Noise error         */
+#define HAL_USART_ERROR_FE           ((uint32_t)0x00000004)   /*!< Frame error         */
+#define HAL_USART_ERROR_ORE          ((uint32_t)0x00000008)   /*!< Overrun error       */
+#define HAL_USART_ERROR_DMA          ((uint32_t)0x00000010)   /*!< DMA transfer error  */
+/**
+  * @}
+  */
+
+/** @defgroup USART_Word_Length USART Word Length
+  * @{
+  */
+#define USART_WORDLENGTH_8B                  ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M)
+/**
+  * @}
+  */
+
+/** @defgroup USART_Stop_Bits USART Number of Stop Bits
+  * @{
+  */
+#define USART_STOPBITS_1                     ((uint32_t)0x00000000)
+#define USART_STOPBITS_0_5                   ((uint32_t)USART_CR2_STOP_0)
+#define USART_STOPBITS_2                     ((uint32_t)USART_CR2_STOP_1)
+#define USART_STOPBITS_1_5                   ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+/**
+  * @}
+  */
+
+/** @defgroup USART_Parity USART Parity
+  * @{
+  */
+#define USART_PARITY_NONE                    ((uint32_t)0x00000000)
+#define USART_PARITY_EVEN                    ((uint32_t)USART_CR1_PCE)
+#define USART_PARITY_ODD                     ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+  * @}
+  */
+
+/** @defgroup USART_Mode USART Mode
+  * @{
+  */
+#define USART_MODE_RX                        ((uint32_t)USART_CR1_RE)
+#define USART_MODE_TX                        ((uint32_t)USART_CR1_TE)
+#define USART_MODE_TX_RX                     ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+  * @}
+  */
+
+/** @defgroup USART_Clock USART Clock
+  * @{
+  */
+#define USART_CLOCK_DISABLE                 ((uint32_t)0x00000000)
+#define USART_CLOCK_ENABLE                  ((uint32_t)USART_CR2_CLKEN)
+/**
+  * @}
+  */
+
+/** @defgroup USART_Clock_Polarity USART Clock Polarity
+  * @{
+  */
+#define USART_POLARITY_LOW                   ((uint32_t)0x00000000)
+#define USART_POLARITY_HIGH                  ((uint32_t)USART_CR2_CPOL)
+/**
+  * @}
+  */
+
+/** @defgroup USART_Clock_Phase  USART Clock Phase
+  * @{
+  */
+#define USART_PHASE_1EDGE                    ((uint32_t)0x00000000)
+#define USART_PHASE_2EDGE                    ((uint32_t)USART_CR2_CPHA)
+/**
+  * @}
+  */
+
+/** @defgroup USART_Last_Bit  USART Last Bit
+  * @{
+  */
+#define USART_LASTBIT_DISABLE                ((uint32_t)0x00000000)
+#define USART_LASTBIT_ENABLE                 ((uint32_t)USART_CR2_LBCL)
+/**
+  * @}
+  */
+
+/** @defgroup USART_NACK_State USART NACK State
+  * @{
+  */
+#define USART_NACK_ENABLE           ((uint32_t)USART_CR3_NACK)
+#define USART_NACK_DISABLE          ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup USART_Flags USART Flags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the SR register
+  * @{
+  */
+#define USART_FLAG_TXE                       ((uint32_t)0x00000080)
+#define USART_FLAG_TC                        ((uint32_t)0x00000040)
+#define USART_FLAG_RXNE                      ((uint32_t)0x00000020)
+#define USART_FLAG_IDLE                      ((uint32_t)0x00000010)
+#define USART_FLAG_ORE                       ((uint32_t)0x00000008)
+#define USART_FLAG_NE                        ((uint32_t)0x00000004)
+#define USART_FLAG_FE                        ((uint32_t)0x00000002)
+#define USART_FLAG_PE                        ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup USART_Interrupt_definition USART Interrupts Definition
+  *        Elements values convention: 0xY000XXXX
+  *           - XXXX  : Interrupt mask in the XX register
+  *           - Y  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR2 register
+  *                 - 11: CR3 register
+  *
+  * @{
+  */
+#define USART_IT_PE                     ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_PEIE))
+#define USART_IT_TXE                    ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_TXEIE))
+#define USART_IT_TC                     ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_TCIE))
+#define USART_IT_RXNE                   ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE))
+#define USART_IT_IDLE                   ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE))
+
+#define USART_IT_LBD                    ((uint32_t)(USART_CR2_REG_INDEX << 28 | USART_CR2_LBDIE))
+
+#define USART_IT_CTS                    ((uint32_t)(USART_CR3_REG_INDEX << 28 | USART_CR3_CTSIE))
+#define USART_IT_ERR                    ((uint32_t)(USART_CR3_REG_INDEX << 28 | USART_CR3_EIE))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Macros USART Exported Macros
+  * @{
+  */
+
+/** @brief Reset USART handle state
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+  * @retval None
+  */
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+
+/** @brief  Checks whether the specified Smartcard flag is set or not.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg USART_FLAG_TXE:  Transmit data register empty flag
+  *            @arg USART_FLAG_TC:   Transmission Complete flag
+  *            @arg USART_FLAG_RXNE: Receive data register not empty flag
+  *            @arg USART_FLAG_IDLE: Idle Line detection flag
+  *            @arg USART_FLAG_ORE:  Overrun Error flag
+  *            @arg USART_FLAG_NE:   Noise Error flag
+  *            @arg USART_FLAG_FE:   Framing Error flag
+  *            @arg USART_FLAG_PE:   Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clears the specified Smartcard pending flags.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+  * @param  __FLAG__: specifies the flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg USART_FLAG_TC:   Transmission Complete flag.
+  *            @arg USART_FLAG_RXNE: Receive data register not empty flag.
+  *
+  * @note   PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
+  *          error) and IDLE (Idle line detected) flags are cleared by software
+  *          sequence: a read operation to USART_SR register followed by a read
+  *          operation to USART_DR register.
+  * @note   RXNE flag can be also cleared by a read to the USART_DR register.
+  * @note   TC flag can be also cleared by software sequence: a read operation to
+  *          USART_SR register followed by a write operation to USART_DR register.
+  * @note   TXE flag is cleared only by a write to the USART_DR register.
+  *
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief  Clear the USART PE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__)    \
+  do{                                           \
+    __IO uint32_t tmpreg;                       \
+    tmpreg = (__HANDLE__)->Instance->SR;        \
+    tmpreg = (__HANDLE__)->Instance->DR;        \
+    UNUSED(tmpreg);                             \
+  } while(0)
+
+/** @brief  Clear the USART FE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the USART NE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the UART ORE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Clear the USART IDLE pending flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief  Enables or disables the specified USART interrupts.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+  * @param  __INTERRUPT__: specifies the USART interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg USART_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg USART_IT_TC:   Transmission complete interrupt
+  *            @arg USART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg USART_IT_IDLE: Idle line detection interrupt
+  *            @arg USART_IT_PE:   Parity Error interrupt
+  *            @arg USART_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  *          This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & USART_IT_MASK)): \
+                                                            (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |=  ((__INTERRUPT__) & USART_IT_MASK)): \
+                                                             ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & USART_IT_MASK)))
+#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
+                                                            (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
+                                                             ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & USART_IT_MASK)))
+
+/** @brief  Checks whether the specified USART interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+  * @param  __IT__: specifies the USART interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg USART_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg USART_IT_TC:  Transmission complete interrupt
+  *            @arg USART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg USART_IT_IDLE: Idle line detection interrupt
+  *            @arg USART_IT_ERR: Error interrupt
+  *            @arg USART_IT_PE: Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
+                                                      (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & USART_IT_MASK))
+
+/** @brief  Macro to enable the USART's one bit sample method
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @retval None
+  */
+#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief  Macro to disable the USART's one bit sample method
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @retval None
+  */
+#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief  Enable USART
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
+  * @retval None
+  */
+#define __HAL_USART_ENABLE(__HANDLE__)               ( (__HANDLE__)->Instance->CR1 |=  USART_CR1_UE)
+
+/** @brief  Disable USART
+  * @param  __HANDLE__: specifies the USART Handle.
+  *         USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
+  * @retval None
+  */
+#define __HAL_USART_DISABLE(__HANDLE__)              ( (__HANDLE__)->Instance->CR1 &=  ~USART_CR1_UE)
+
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USART_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup USART_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+/**
+  * @}
+  */
+
+/** @addtogroup USART_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,  uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+/**
+  * @}
+  */
+
+/** @addtogroup USART_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  ************************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t               HAL_USART_GetError(USART_HandleTypeDef *husart);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup USART_Private_Constants USART Private Constants
+  * @{
+  */
+/** @brief USART interruptions flag mask
+  *
+  */
+#define USART_IT_MASK  ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+                                   USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
+
+
+#define USART_CR1_REG_INDEX             1
+#define USART_CR2_REG_INDEX             2
+#define USART_CR3_REG_INDEX             3
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup USART_Private_Macros USART Private Macros
+  * @{
+  */
+#define IS_USART_NACK_STATE(NACK) (((NACK) == USART_NACK_ENABLE) || \
+                                   ((NACK) == USART_NACK_DISABLE))
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
+                                       ((LASTBIT) == USART_LASTBIT_ENABLE))
+#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
+#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLE) || \
+                               ((CLOCK) == USART_CLOCK_ENABLE))
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
+                                          ((LENGTH) == USART_WORDLENGTH_9B))
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
+                                         ((STOPBITS) == USART_STOPBITS_0_5) || \
+                                         ((STOPBITS) == USART_STOPBITS_1_5) || \
+                                         ((STOPBITS) == USART_STOPBITS_2))
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
+                                     ((PARITY) == USART_PARITY_EVEN) || \
+                                     ((PARITY) == USART_PARITY_ODD))
+#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFF3) == 0x00) && ((MODE) != (uint32_t)0x00))
+#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
+
+#define USART_DIV(_PCLK_, _BAUD_)                  (((_PCLK_)*25)/(2*(_BAUD_)))
+#define USART_DIVMANT(_PCLK_, _BAUD_)              (USART_DIV((_PCLK_), (_BAUD_))/100)
+#define USART_DIVFRAQ(_PCLK_, _BAUD_)              (((USART_DIV((_PCLK_), (_BAUD_)) - (USART_DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define USART_BRR(_PCLK_, _BAUD_)                  ((USART_DIVMANT((_PCLK_), (_BAUD_)) << 4)|(USART_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup USART_Private_Functions USART Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_wwdg.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_wwdg.h
new file mode 100644
index 0000000..03f6c39
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_wwdg.h
@@ -0,0 +1,349 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_wwdg.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of WWDG HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_WWDG_H
+#define __STM32F4xx_HAL_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup WWDG
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Types WWDG Exported Types
+  * @{
+  */
+
+/**
+  * @brief  WWDG HAL State Structure definition
+  */
+typedef enum
+{
+  HAL_WWDG_STATE_RESET     = 0x00,  /*!< WWDG not yet initialized or disabled */
+  HAL_WWDG_STATE_READY     = 0x01,  /*!< WWDG initialized and ready for use   */
+  HAL_WWDG_STATE_BUSY      = 0x02,  /*!< WWDG internal process is ongoing     */
+  HAL_WWDG_STATE_TIMEOUT   = 0x03,  /*!< WWDG timeout state                   */
+  HAL_WWDG_STATE_ERROR     = 0x04   /*!< WWDG error state                     */
+}HAL_WWDG_StateTypeDef;
+
+/**
+  * @brief  WWDG Init structure definition
+  */
+typedef struct
+{
+  uint32_t Prescaler;  /*!< Specifies the prescaler value of the WWDG.
+                            This parameter can be a value of @ref WWDG_Prescaler */
+
+  uint32_t Window;     /*!< Specifies the WWDG window value to be compared to the downcounter.
+                            This parameter must be a number lower than Max_Data = 0x80 */
+
+  uint32_t Counter;    /*!< Specifies the WWDG free-running downcounter value.
+                            This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+
+}WWDG_InitTypeDef;
+
+/**
+  * @brief  WWDG handle Structure definition
+  */
+typedef struct
+{
+  WWDG_TypeDef                 *Instance;  /*!< Register base address    */
+
+  WWDG_InitTypeDef             Init;       /*!< WWDG required parameters */
+
+  HAL_LockTypeDef              Lock;       /*!< WWDG locking object      */
+
+  __IO HAL_WWDG_StateTypeDef   State;      /*!< WWDG communication state */
+
+}WWDG_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Constants WWDG Exported Constants
+  * @{
+  */
+
+/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
+  * @{
+  */
+#define WWDG_IT_EWI                       WWDG_CFR_EWI  /*!< Early wakeup interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Flag_definition WWDG Flag definition
+  * @brief WWDG Flag definition
+  * @{
+  */
+#define WWDG_FLAG_EWIF                    WWDG_SR_EWIF  /*!< Early wakeup interrupt flag */
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Prescaler WWDG Prescaler
+  * @{
+  */
+#define WWDG_PRESCALER_1                 ((uint32_t)0x00000000)  /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2                  WWDG_CFR_WDGTB0  /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4                  WWDG_CFR_WDGTB1  /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8                  WWDG_CFR_WDGTB  /*!< WWDG counter clock = (PCLK1/4096)/8 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Macros WWDG Exported Macros
+  * @{
+  */
+
+/** @brief Reset WWDG handle state
+  * @param  __HANDLE__: WWDG handle
+  * @retval None
+  */
+#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
+
+/**
+  * @brief  Enables the WWDG peripheral.
+  * @param  __HANDLE__: WWDG handle
+  * @retval None
+  */
+#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
+
+/**
+  * @brief  Disables the WWDG peripheral.
+  * @param  __HANDLE__: WWDG handle
+  * @note   WARNING: This is a dummy macro for HAL code alignment.
+  *         Once enable, WWDG Peripheral cannot be disabled except by a system reset.
+  * @retval None
+  */
+#define __HAL_WWDG_DISABLE(__HANDLE__)                      /* dummy  macro */
+
+/**
+  * @brief  Gets the selected WWDG's it status.
+  * @param  __HANDLE__: WWDG handle
+  * @param  __INTERRUPT__: specifies the it to check.
+  *        This parameter can be one of the following values:
+  *            @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
+  * @retval The new state of WWDG_FLAG (SET or RESET).
+  */
+#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__)       __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__))
+
+/** @brief  Clear the WWDG's interrupt pending bits
+  *         bits to clear the selected interrupt pending bits.
+  * @param  __HANDLE__: WWDG handle
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear.
+  *         This parameter can be one of the following values:
+  *            @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+  */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__)     __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
+
+/**
+  * @brief  Enables the WWDG early wakeup interrupt.
+  * @param  __HANDLE__: WWDG handle
+  * @param  __INTERRUPT__: specifies the interrupt to enable.
+  *         This parameter can be one of the following values:
+  *            @arg WWDG_IT_EWI: Early wakeup interrupt
+  * @note   Once enabled this interrupt cannot be disabled except by a system reset.
+  * @retval None
+  */
+#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__))
+
+/**
+  * @brief  Disables the WWDG early wakeup interrupt.
+  * @param  __HANDLE__: WWDG handle
+  * @param  __INTERRUPT__: specifies the interrupt to disable.
+  *         This parameter can be one of the following values:
+  *            @arg WWDG_IT_EWI: Early wakeup interrupt
+  * @note   WARNING: This is a dummy macro for HAL code alignment.
+  *         Once enabled this interrupt cannot be disabled except by a system reset.
+  * @retval None
+  */
+#define __HAL_WWDG_DISABLE_IT(__HANDLE__, __INTERRUPT__)                   /* dummy  macro */
+
+/**
+  * @brief  Gets the selected WWDG's flag status.
+  * @param  __HANDLE__: WWDG handle
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+  * @retval The new state of WWDG_FLAG (SET or RESET).
+  */
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clears the WWDG's pending flags.
+  * @param  __HANDLE__: WWDG handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *         This parameter can be one of the following values:
+  *            @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+  * @retval None
+  */
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/** @brief  Checks if the specified WWDG interrupt source is enabled or disabled.
+  * @param  __HANDLE__: WWDG Handle.
+  * @param  __INTERRUPT__: specifies the WWDG interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg WWDG_IT_EWI: Early Wakeup Interrupt
+  * @retval state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup WWDG_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup WWDG_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg);
+/**
+  * @}
+  */
+
+/** @addtogroup WWDG_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter);
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
+/**
+  * @}
+  */
+
+/** @addtogroup WWDG_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  **************************************************/
+HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup WWDG_Private_Constants WWDG Private Constants
+  * @{
+  */
+/** @defgroup WWDG_BitAddress_AliasRegion WWDG BitAddress
+  * @brief WWDG registers bit address in the alias region
+  * @{
+  */
+
+/* --- CFR Register ---*/
+/* Alias word address of EWI bit */
+#define WWDG_CFR_BASE   (uint32_t)(WWDG_BASE + 0x04)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup WWDG_Private_Macros WWDG Private Macros
+  * @{
+  */
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+                                          ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+                                          ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+                                          ((__PRESCALER__) == WWDG_PRESCALER_8))
+#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup WWDG_Private_Functions WWDG Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h
new file mode 100644
index 0000000..385af87
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h
@@ -0,0 +1,1421 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_ll_fmc.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of FMC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_FMC_H
+#define __STM32F4xx_LL_FMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FMC_LL
+  * @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/* Private types -------------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Types FMC Private Types
+  * @{
+  */
+
+/**
+  * @brief  FMC NORSRAM Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t NSBank;                       /*!< Specifies the NORSRAM memory device that will be used.
+                                              This parameter can be a value of @ref FMC_NORSRAM_Bank                     */
+
+  uint32_t DataAddressMux;               /*!< Specifies whether the address and data values are
+                                              multiplexed on the data bus or not.
+                                              This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing    */
+
+  uint32_t MemoryType;                   /*!< Specifies the type of external memory attached to
+                                              the corresponding memory device.
+                                              This parameter can be a value of @ref FMC_Memory_Type                      */
+
+  uint32_t MemoryDataWidth;              /*!< Specifies the external memory device width.
+                                              This parameter can be a value of @ref FMC_NORSRAM_Data_Width               */
+
+  uint32_t BurstAccessMode;              /*!< Enables or disables the burst access mode for Flash memory,
+                                              valid only with synchronous burst Flash memories.
+                                              This parameter can be a value of @ref FMC_Burst_Access_Mode                */
+
+  uint32_t WaitSignalPolarity;           /*!< Specifies the wait signal polarity, valid only when accessing
+                                              the Flash memory in burst mode.
+                                              This parameter can be a value of @ref FMC_Wait_Signal_Polarity             */
+
+  uint32_t WrapMode;                     /*!< Enables or disables the Wrapped burst access mode for Flash
+                                              memory, valid only when accessing Flash memories in burst mode.
+                                              This parameter can be a value of @ref FMC_Wrap_Mode
+                                              This mode is not available for the STM32F446xx devices                    */
+
+  uint32_t WaitSignalActive;             /*!< Specifies if the wait signal is asserted by the memory one
+                                              clock cycle before the wait state or during the wait state,
+                                              valid only when accessing memories in burst mode.
+                                              This parameter can be a value of @ref FMC_Wait_Timing                      */
+
+  uint32_t WriteOperation;               /*!< Enables or disables the write operation in the selected device by the FMC.
+                                              This parameter can be a value of @ref FMC_Write_Operation                  */
+
+  uint32_t WaitSignal;                   /*!< Enables or disables the wait state insertion via wait
+                                              signal, valid for Flash memory access in burst mode.
+                                              This parameter can be a value of @ref FMC_Wait_Signal                      */
+
+  uint32_t ExtendedMode;                 /*!< Enables or disables the extended mode.
+                                              This parameter can be a value of @ref FMC_Extended_Mode                    */
+
+  uint32_t AsynchronousWait;             /*!< Enables or disables wait signal during asynchronous transfers,
+                                              valid only with asynchronous Flash memories.
+                                              This parameter can be a value of @ref FMC_AsynchronousWait                 */
+
+  uint32_t WriteBurst;                   /*!< Enables or disables the write burst operation.
+                                              This parameter can be a value of @ref FMC_Write_Burst                      */
+
+  uint32_t ContinuousClock;              /*!< Enables or disables the FMC clock output to external memory devices.
+                                              This parameter is only enabled through the FMC_BCR1 register, and don't care
+                                              through FMC_BCR2..4 registers.
+                                              This parameter can be a value of @ref FMC_Continous_Clock                  */
+
+  uint32_t WriteFifo;                    /*!< Enables or disables the write FIFO used by the FMC controller.
+                                              This parameter is only enabled through the FMC_BCR1 register, and don't care
+                                              through FMC_BCR2..4 registers.
+                                              This parameter can be a value of @ref FMC_Write_FIFO
+                                              This mode is available only for the STM32F446xx devices                    */
+
+  uint32_t PageSize;                     /*!< Specifies the memory page size.
+                                              This parameter can be a value of @ref FMC_Page_Size
+                                              This mode is available only for the STM32F446xx devices                    */
+
+}FMC_NORSRAM_InitTypeDef;
+
+/**
+  * @brief  FMC NORSRAM Timing parameters structure definition
+  */
+typedef struct
+{
+  uint32_t AddressSetupTime;             /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the address setup time.
+                                              This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+                                              @note This parameter is not used with synchronous NOR Flash memories.      */
+
+  uint32_t AddressHoldTime;              /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the address hold time.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+                                              @note This parameter is not used with synchronous NOR Flash memories.      */
+
+  uint32_t DataSetupTime;                /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the data setup time.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+                                              @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+                                              NOR Flash memories.                                                        */
+
+  uint32_t BusTurnAroundDuration;        /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the bus turnaround.
+                                              This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+                                              @note This parameter is only used for multiplexed NOR Flash memories.      */
+
+  uint32_t CLKDivision;                  /*!< Defines the period of CLK clock output signal, expressed in number of
+                                              HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+                                              @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+                                              accesses.                                                                  */
+
+  uint32_t DataLatency;                  /*!< Defines the number of memory clock cycles to issue
+                                              to the memory before getting the first data.
+                                              The parameter value depends on the memory type as shown below:
+                                              - It must be set to 0 in case of a CRAM
+                                              - It is don't care in asynchronous NOR, SRAM or ROM accesses
+                                              - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+                                                with synchronous burst mode enable                                       */
+
+  uint32_t AccessMode;                   /*!< Specifies the asynchronous access mode.
+                                              This parameter can be a value of @ref FMC_Access_Mode                      */
+}FMC_NORSRAM_TimingTypeDef;
+
+/**
+  * @brief  FMC NAND Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t NandBank;               /*!< Specifies the NAND memory device that will be used.
+                                        This parameter can be a value of @ref FMC_NAND_Bank                    */
+
+  uint32_t Waitfeature;            /*!< Enables or disables the Wait feature for the NAND Memory device.
+                                        This parameter can be any value of @ref FMC_Wait_feature               */
+
+  uint32_t MemoryDataWidth;        /*!< Specifies the external memory device width.
+                                        This parameter can be any value of @ref FMC_NAND_Data_Width            */
+
+  uint32_t EccComputation;         /*!< Enables or disables the ECC computation.
+                                        This parameter can be any value of @ref FMC_ECC                        */
+
+  uint32_t ECCPageSize;            /*!< Defines the page size for the extended ECC.
+                                        This parameter can be any value of @ref FMC_ECC_Page_Size              */
+
+  uint32_t TCLRSetupTime;          /*!< Defines the number of HCLK cycles to configure the
+                                        delay between CLE low and RE low.
+                                        This parameter can be a value between Min_Data = 0 and Max_Data = 255  */
+
+  uint32_t TARSetupTime;           /*!< Defines the number of HCLK cycles to configure the
+                                        delay between ALE low and RE low.
+                                        This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_InitTypeDef;
+
+/**
+  * @brief  FMC NAND/PCCARD Timing parameters structure definition
+  */
+typedef struct
+{
+  uint32_t SetupTime;            /*!< Defines the number of HCLK cycles to setup address before
+                                      the command assertion for NAND-Flash read or write access
+                                      to common/Attribute or I/O memory space (depending on
+                                      the memory space timing to be configured).
+                                      This parameter can be a value between Min_Data = 0 and Max_Data = 255    */
+
+  uint32_t WaitSetupTime;        /*!< Defines the minimum number of HCLK cycles to assert the
+                                      command for NAND-Flash read or write access to
+                                      common/Attribute or I/O memory space (depending on the
+                                      memory space timing to be configured).
+                                      This parameter can be a number between Min_Data = 0 and Max_Data = 255   */
+
+  uint32_t HoldSetupTime;        /*!< Defines the number of HCLK clock cycles to hold address
+                                      (and data for write access) after the command de-assertion
+                                      for NAND-Flash read or write access to common/Attribute
+                                      or I/O memory space (depending on the memory space timing
+                                      to be configured).
+                                      This parameter can be a number between Min_Data = 0 and Max_Data = 255   */
+
+  uint32_t HiZSetupTime;         /*!< Defines the number of HCLK clock cycles during which the
+                                      data bus is kept in HiZ after the start of a NAND-Flash
+                                      write access to common/Attribute or I/O memory space (depending
+                                      on the memory space timing to be configured).
+                                      This parameter can be a number between Min_Data = 0 and Max_Data = 255   */
+}FMC_NAND_PCC_TimingTypeDef;
+
+/**
+  * @brief FMC NAND Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Waitfeature;            /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+                                        This parameter can be any value of @ref FMC_Wait_feature               */
+
+  uint32_t TCLRSetupTime;          /*!< Defines the number of HCLK cycles to configure the
+                                        delay between CLE low and RE low.
+                                        This parameter can be a value between Min_Data = 0 and Max_Data = 255  */
+
+  uint32_t TARSetupTime;           /*!< Defines the number of HCLK cycles to configure the
+                                        delay between ALE low and RE low.
+                                        This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_PCCARD_InitTypeDef;
+
+/**
+  * @brief  FMC SDRAM Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t SDBank;                      /*!< Specifies the SDRAM memory device that will be used.
+                                             This parameter can be a value of @ref FMC_SDRAM_Bank                */
+
+  uint32_t ColumnBitsNumber;            /*!< Defines the number of bits of column address.
+                                             This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */
+
+  uint32_t RowBitsNumber;               /*!< Defines the number of bits of column address.
+                                             This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number.    */
+
+  uint32_t MemoryDataWidth;             /*!< Defines the memory device width.
+                                             This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width.   */
+
+  uint32_t InternalBankNumber;          /*!< Defines the number of the device's internal banks.
+                                             This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number.      */
+
+  uint32_t CASLatency;                  /*!< Defines the SDRAM CAS latency in number of memory clock cycles.
+                                             This parameter can be a value of @ref FMC_SDRAM_CAS_Latency.        */
+
+  uint32_t WriteProtection;             /*!< Enables the SDRAM device to be accessed in write mode.
+                                             This parameter can be a value of @ref FMC_SDRAM_Write_Protection.   */
+
+  uint32_t SDClockPeriod;               /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow
+                                             to disable the clock before changing frequency.
+                                             This parameter can be a value of @ref FMC_SDRAM_Clock_Period.       */
+
+  uint32_t ReadBurst;                   /*!< This bit enable the SDRAM controller to anticipate the next read
+                                             commands during the CAS latency and stores data in the Read FIFO.
+                                             This parameter can be a value of @ref FMC_SDRAM_Read_Burst.         */
+
+  uint32_t ReadPipeDelay;               /*!< Define the delay in system clock cycles on read data path.
+                                             This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay.    */
+}FMC_SDRAM_InitTypeDef;
+
+/**
+  * @brief FMC SDRAM Timing parameters structure definition
+  */
+typedef struct
+{
+  uint32_t LoadToActiveDelay;            /*!< Defines the delay between a Load Mode Register command and
+                                              an active or Refresh command in number of memory clock cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+
+  uint32_t ExitSelfRefreshDelay;         /*!< Defines the delay from releasing the self refresh command to
+                                              issuing the Activate command in number of memory clock cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+
+  uint32_t SelfRefreshTime;              /*!< Defines the minimum Self Refresh period in number of memory clock
+                                              cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+
+  uint32_t RowCycleDelay;                /*!< Defines the delay between the Refresh command and the Activate command
+                                              and the delay between two consecutive Refresh commands in number of
+                                              memory clock cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+
+  uint32_t WriteRecoveryTime;            /*!< Defines the Write recovery Time in number of memory clock cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+
+  uint32_t RPDelay;                      /*!< Defines the delay between a Precharge Command and an other command
+                                              in number of memory clock cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+
+  uint32_t RCDDelay;                     /*!< Defines the delay between the Activate Command and a Read/Write
+                                              command in number of memory clock cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+}FMC_SDRAM_TimingTypeDef;
+
+/**
+  * @brief SDRAM command parameters structure definition
+  */
+typedef struct
+{
+  uint32_t CommandMode;                  /*!< Defines the command issued to the SDRAM device.
+                                              This parameter can be a value of @ref FMC_SDRAM_Command_Mode.          */
+
+  uint32_t CommandTarget;                /*!< Defines which device (1 or 2) the command will be issued to.
+                                              This parameter can be a value of @ref FMC_SDRAM_Command_Target.        */
+
+  uint32_t AutoRefreshNumber;            /*!< Defines the number of consecutive auto refresh command issued
+                                              in auto refresh mode.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16   */
+  uint32_t ModeRegisterDefinition;       /*!< Defines the SDRAM Mode register content                                */
+}FMC_SDRAM_CommandTypeDef;
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Constants FMC Private Constants
+  * @{
+  */
+
+/** @defgroup FMC_LL_NOR_SRAM_Controller FMC NOR/SRAM Controller
+  * @{
+  */
+/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank
+  * @{
+  */
+#define FMC_NORSRAM_BANK1                       ((uint32_t)0x00000000)
+#define FMC_NORSRAM_BANK2                       ((uint32_t)0x00000002)
+#define FMC_NORSRAM_BANK3                       ((uint32_t)0x00000004)
+#define FMC_NORSRAM_BANK4                       ((uint32_t)0x00000006)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing
+  * @{
+  */
+#define FMC_DATA_ADDRESS_MUX_DISABLE            ((uint32_t)0x00000000)
+#define FMC_DATA_ADDRESS_MUX_ENABLE             ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Memory_Type FMC Memory Type
+  * @{
+  */
+#define FMC_MEMORY_TYPE_SRAM                    ((uint32_t)0x00000000)
+#define FMC_MEMORY_TYPE_PSRAM                   ((uint32_t)0x00000004)
+#define FMC_MEMORY_TYPE_NOR                     ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width
+  * @{
+  */
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8             ((uint32_t)0x00000000)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16            ((uint32_t)0x00000010)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32            ((uint32_t)0x00000020)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access
+  * @{
+  */
+#define FMC_NORSRAM_FLASH_ACCESS_ENABLE         ((uint32_t)0x00000040)
+#define FMC_NORSRAM_FLASH_ACCESS_DISABLE        ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode
+  * @{
+  */
+#define FMC_BURST_ACCESS_MODE_DISABLE           ((uint32_t)0x00000000)
+#define FMC_BURST_ACCESS_MODE_ENABLE            ((uint32_t)0x00000100)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity
+  * @{
+  */
+#define FMC_WAIT_SIGNAL_POLARITY_LOW            ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_POLARITY_HIGH           ((uint32_t)0x00000200)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Wrap_Mode FMC Wrap Mode
+  * @{
+  */
+/** @note This mode is not available for the STM32F446xx devices
+  */
+#define FMC_WRAP_MODE_DISABLE                   ((uint32_t)0x00000000)
+#define FMC_WRAP_MODE_ENABLE                    ((uint32_t)0x00000400)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Wait_Timing FMC Wait Timing
+  * @{
+  */
+#define FMC_WAIT_TIMING_BEFORE_WS               ((uint32_t)0x00000000)
+#define FMC_WAIT_TIMING_DURING_WS               ((uint32_t)0x00000800)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Write_Operation FMC Write Operation
+  * @{
+  */
+#define FMC_WRITE_OPERATION_DISABLE             ((uint32_t)0x00000000)
+#define FMC_WRITE_OPERATION_ENABLE              ((uint32_t)0x00001000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Wait_Signal FMC Wait Signal
+  * @{
+  */
+#define FMC_WAIT_SIGNAL_DISABLE                 ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_ENABLE                  ((uint32_t)0x00002000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Extended_Mode FMC Extended Mode
+  * @{
+  */
+#define FMC_EXTENDED_MODE_DISABLE               ((uint32_t)0x00000000)
+#define FMC_EXTENDED_MODE_ENABLE                ((uint32_t)0x00004000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait
+  * @{
+  */
+#define FMC_ASYNCHRONOUS_WAIT_DISABLE           ((uint32_t)0x00000000)
+#define FMC_ASYNCHRONOUS_WAIT_ENABLE            ((uint32_t)0x00008000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Page_Size FMC Page Size
+  * @note  These values are available only for the STM32F446xx devices.
+  * @{
+  */
+#define FMC_PAGE_SIZE_NONE           ((uint32_t)0x00000000)
+#define FMC_PAGE_SIZE_128            ((uint32_t)FMC_BCR1_CPSIZE_0)
+#define FMC_PAGE_SIZE_256            ((uint32_t)FMC_BCR1_CPSIZE_1)
+#define FMC_PAGE_SIZE_1024           ((uint32_t)FMC_BCR1_CPSIZE_2)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Write_FIFO FMC Write FIFO
+  * @note  These values are available only for the STM32F446xx devices.
+  * @{
+  */
+#define FMC_WRITE_FIFO_DISABLE           ((uint32_t)0x00000000)
+#define FMC_WRITE_FIFO_ENABLE            ((uint32_t)FMC_BCR1_WFDIS)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Write_Burst FMC Write Burst
+  * @{
+  */
+#define FMC_WRITE_BURST_DISABLE                 ((uint32_t)0x00000000)
+#define FMC_WRITE_BURST_ENABLE                  ((uint32_t)0x00080000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Continous_Clock FMC Continuous Clock
+  * @{
+  */
+#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY          ((uint32_t)0x00000000)
+#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC         ((uint32_t)0x00100000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Access_Mode FMC Access Mode
+  * @{
+  */
+#define FMC_ACCESS_MODE_A                        ((uint32_t)0x00000000)
+#define FMC_ACCESS_MODE_B                        ((uint32_t)0x10000000)
+#define FMC_ACCESS_MODE_C                        ((uint32_t)0x20000000)
+#define FMC_ACCESS_MODE_D                        ((uint32_t)0x30000000)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_NAND_Controller FMC NAND Controller
+  * @{
+  */
+/** @defgroup FMC_NAND_Bank FMC NAND Bank
+  * @{
+  */
+#define FMC_NAND_BANK2                          ((uint32_t)0x00000010)
+#define FMC_NAND_BANK3                          ((uint32_t)0x00000100)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Wait_feature FMC Wait feature
+  * @{
+  */
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE           ((uint32_t)0x00000000)
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE            ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type
+  * @{
+  */
+#define FMC_PCR_MEMORY_TYPE_PCCARD        ((uint32_t)0x00000000)
+#define FMC_PCR_MEMORY_TYPE_NAND          ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width
+  * @{
+  */
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8                ((uint32_t)0x00000000)
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16               ((uint32_t)0x00000010)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_ECC FMC ECC
+  * @{
+  */
+#define FMC_NAND_ECC_DISABLE                    ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_ENABLE                     ((uint32_t)0x00000040)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size
+  * @{
+  */
+#define FMC_NAND_ECC_PAGE_SIZE_256BYTE          ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_PAGE_SIZE_512BYTE          ((uint32_t)0x00020000)
+#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE         ((uint32_t)0x00040000)
+#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE         ((uint32_t)0x00060000)
+#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE         ((uint32_t)0x00080000)
+#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE         ((uint32_t)0x000A0000)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_SDRAM_Controller FMC SDRAM Controller
+  * @{
+  */
+/** @defgroup FMC_SDRAM_Bank FMC SDRAM Bank
+  * @{
+  */
+#define FMC_SDRAM_BANK1                       ((uint32_t)0x00000000)
+#define FMC_SDRAM_BANK2                       ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Column_Bits_number FMC SDRAM Column Bits number
+  * @{
+  */
+#define FMC_SDRAM_COLUMN_BITS_NUM_8           ((uint32_t)0x00000000)
+#define FMC_SDRAM_COLUMN_BITS_NUM_9           ((uint32_t)0x00000001)
+#define FMC_SDRAM_COLUMN_BITS_NUM_10          ((uint32_t)0x00000002)
+#define FMC_SDRAM_COLUMN_BITS_NUM_11          ((uint32_t)0x00000003)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Row_Bits_number FMC SDRAM Row Bits number
+  * @{
+  */
+#define FMC_SDRAM_ROW_BITS_NUM_11             ((uint32_t)0x00000000)
+#define FMC_SDRAM_ROW_BITS_NUM_12             ((uint32_t)0x00000004)
+#define FMC_SDRAM_ROW_BITS_NUM_13             ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Memory_Bus_Width FMC SDRAM Memory Bus Width
+  * @{
+  */
+#define FMC_SDRAM_MEM_BUS_WIDTH_8             ((uint32_t)0x00000000)
+#define FMC_SDRAM_MEM_BUS_WIDTH_16            ((uint32_t)0x00000010)
+#define FMC_SDRAM_MEM_BUS_WIDTH_32            ((uint32_t)0x00000020)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Internal_Banks_Number FMC SDRAM Internal Banks Number
+  * @{
+  */
+#define FMC_SDRAM_INTERN_BANKS_NUM_2          ((uint32_t)0x00000000)
+#define FMC_SDRAM_INTERN_BANKS_NUM_4          ((uint32_t)0x00000040)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_CAS_Latency FMC SDRAM CAS Latency
+  * @{
+  */
+#define FMC_SDRAM_CAS_LATENCY_1               ((uint32_t)0x00000080)
+#define FMC_SDRAM_CAS_LATENCY_2               ((uint32_t)0x00000100)
+#define FMC_SDRAM_CAS_LATENCY_3               ((uint32_t)0x00000180)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Write_Protection FMC SDRAM Write Protection
+  * @{
+  */
+#define FMC_SDRAM_WRITE_PROTECTION_DISABLE    ((uint32_t)0x00000000)
+#define FMC_SDRAM_WRITE_PROTECTION_ENABLE     ((uint32_t)0x00000200)
+
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Clock_Period FMC SDRAM Clock Period
+  * @{
+  */
+#define FMC_SDRAM_CLOCK_DISABLE               ((uint32_t)0x00000000)
+#define FMC_SDRAM_CLOCK_PERIOD_2              ((uint32_t)0x00000800)
+#define FMC_SDRAM_CLOCK_PERIOD_3              ((uint32_t)0x00000C00)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Read_Burst FMC SDRAM Read Burst
+  * @{
+  */
+#define FMC_SDRAM_RBURST_DISABLE              ((uint32_t)0x00000000)
+#define FMC_SDRAM_RBURST_ENABLE               ((uint32_t)0x00001000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Read_Pipe_Delay FMC SDRAM Read Pipe Delay
+  * @{
+  */
+#define FMC_SDRAM_RPIPE_DELAY_0               ((uint32_t)0x00000000)
+#define FMC_SDRAM_RPIPE_DELAY_1               ((uint32_t)0x00002000)
+#define FMC_SDRAM_RPIPE_DELAY_2               ((uint32_t)0x00004000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Command_Mode FMC SDRAM Command Mode
+  * @{
+  */
+#define FMC_SDRAM_CMD_NORMAL_MODE             ((uint32_t)0x00000000)
+#define FMC_SDRAM_CMD_CLK_ENABLE              ((uint32_t)0x00000001)
+#define FMC_SDRAM_CMD_PALL                    ((uint32_t)0x00000002)
+#define FMC_SDRAM_CMD_AUTOREFRESH_MODE        ((uint32_t)0x00000003)
+#define FMC_SDRAM_CMD_LOAD_MODE               ((uint32_t)0x00000004)
+#define FMC_SDRAM_CMD_SELFREFRESH_MODE        ((uint32_t)0x00000005)
+#define FMC_SDRAM_CMD_POWERDOWN_MODE          ((uint32_t)0x00000006)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Command_Target FMC SDRAM Command Target
+  * @{
+  */
+#define FMC_SDRAM_CMD_TARGET_BANK2            FMC_SDCMR_CTB2
+#define FMC_SDRAM_CMD_TARGET_BANK1            FMC_SDCMR_CTB1
+#define FMC_SDRAM_CMD_TARGET_BANK1_2          ((uint32_t)0x00000018)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Mode_Status FMC SDRAM Mode Status
+  * @{
+  */
+#define FMC_SDRAM_NORMAL_MODE                     ((uint32_t)0x00000000)
+#define FMC_SDRAM_SELF_REFRESH_MODE               FMC_SDSR_MODES1_0
+#define FMC_SDRAM_POWER_DOWN_MODE                 FMC_SDSR_MODES1_1
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_Interrupt_definition FMC Interrupt definition
+  * @{
+  */
+#define FMC_IT_RISING_EDGE                ((uint32_t)0x00000008)
+#define FMC_IT_LEVEL                      ((uint32_t)0x00000010)
+#define FMC_IT_FALLING_EDGE               ((uint32_t)0x00000020)
+#define FMC_IT_REFRESH_ERROR              ((uint32_t)0x00004000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_Flag_definition FMC Flag definition
+  * @{
+  */
+#define FMC_FLAG_RISING_EDGE                    ((uint32_t)0x00000001)
+#define FMC_FLAG_LEVEL                          ((uint32_t)0x00000002)
+#define FMC_FLAG_FALLING_EDGE                   ((uint32_t)0x00000004)
+#define FMC_FLAG_FEMPT                          ((uint32_t)0x00000040)
+#define FMC_SDRAM_FLAG_REFRESH_IT               FMC_SDSR_RE
+#define FMC_SDRAM_FLAG_BUSY                     FMC_SDSR_BUSY
+#define FMC_SDRAM_FLAG_REFRESH_ERROR            FMC_SDRTR_CRE
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_Alias_definition  FMC Alias definition
+  * @{
+  */
+#if defined(STM32F446xx)
+   #define FMC_NAND_TypeDef               FMC_Bank3_TypeDef
+#else
+   #define FMC_NAND_TypeDef               FMC_Bank2_3_TypeDef
+   #define FMC_PCCARD_TypeDef             FMC_Bank4_TypeDef
+#endif /* defined(STM32F446xx) */
+   #define FMC_NORSRAM_TypeDef            FMC_Bank1_TypeDef
+   #define FMC_NORSRAM_EXTENDED_TypeDef   FMC_Bank1E_TypeDef
+   #define FMC_SDRAM_TypeDef              FMC_Bank5_6_TypeDef
+
+
+#if defined(STM32F446xx)
+   #define FMC_NAND_DEVICE                FMC_Bank3
+#else
+   #define FMC_NAND_DEVICE                FMC_Bank2_3
+   #define FMC_PCCARD_DEVICE              FMC_Bank4
+#endif /* defined(STM32F446xx) */
+   #define FMC_NORSRAM_DEVICE             FMC_Bank1
+   #define FMC_NORSRAM_EXTENDED_DEVICE    FMC_Bank1E
+   #define FMC_SDRAM_DEVICE               FMC_Bank5_6
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Macros FMC Private Macros
+  * @{
+  */
+
+/** @defgroup FMC_LL_NOR_Macros FMC NOR/SRAM Macros
+ *  @brief macros to handle NOR device enable/disable and read/write operations
+ *  @{
+ */
+/**
+  * @brief  Enable the NORSRAM device access.
+  * @param  __INSTANCE__: FMC_NORSRAM Instance
+  * @param  __BANK__: FMC_NORSRAM Bank
+  * @retval None
+  */
+#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__)  ((__INSTANCE__)->BTCR[(__BANK__)] |= FMC_BCR1_MBKEN)
+
+/**
+  * @brief  Disable the NORSRAM device access.
+  * @param  __INSTANCE__: FMC_NORSRAM Instance
+  * @param  __BANK__: FMC_NORSRAM Bank
+  * @retval None
+  */
+#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FMC_BCR1_MBKEN)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_NAND_Macros FMC NAND Macros
+ *  @brief macros to handle NAND device enable/disable
+ *  @{
+ */
+#if defined(STM32F446xx)
+/**
+  * @brief  Enable the NAND device access.
+  * @param  __INSTANCE__: FMC_NAND Instance
+  * @param  __BANK__: FMC_NAND Bank
+  * @retval None
+  */
+#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__)  ((__INSTANCE__)->PCR |= FMC_PCR_PBKEN)
+
+/**
+  * @brief  Disable the NAND device access.
+  * @param  __INSTANCE__: FMC_NAND Instance
+  * @param  __BANK__: FMC_NAND Bank
+  * @retval None
+  */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->PCR &= ~FMC_PCR_PBKEN)
+#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+/**
+  * @brief  Enable the NAND device access.
+  * @param  __INSTANCE__: FMC_NAND Instance
+  * @param  __BANK__: FMC_NAND Bank
+  * @retval None
+  */
+#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__)  (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FMC_PCR2_PBKEN): \
+                                                    ((__INSTANCE__)->PCR3 |= FMC_PCR3_PBKEN))
+
+/**
+  * @brief  Disable the NAND device access.
+  * @param  __INSTANCE__: FMC_NAND Instance
+  * @param  __BANK__: FMC_NAND Bank
+  * @retval None
+  */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FMC_PCR2_PBKEN): \
+                                                   ((__INSTANCE__)->PCR3 &= ~FMC_PCR3_PBKEN))
+
+#endif /* defined(STM32F446xx)*/
+/**
+  * @}
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup FMC_LL_PCCARD_Macros FMC PCCARD Macros
+ *  @brief macros to handle SRAM read/write operations
+ *  @{
+ */
+/**
+  * @brief  Enable the PCCARD device access.
+  * @param  __INSTANCE__: FMC_PCCARD Instance
+  * @retval None
+  */
+#define __FMC_PCCARD_ENABLE(__INSTANCE__)  ((__INSTANCE__)->PCR4 |= FMC_PCR4_PBKEN)
+
+/**
+  * @brief  Disable the PCCARD device access.
+  * @param  __INSTANCE__: FMC_PCCARD Instance
+  * @retval None
+  */
+#define __FMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FMC_PCR4_PBKEN)
+/**
+  * @}
+  */
+#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+
+/** @defgroup FMC_LL_Flag_Interrupt_Macros FMC Flag&Interrupt Macros
+ *  @brief macros to handle FMC flags and interrupts
+ * @{
+ */
+#if defined(STM32F446xx)
+/**
+  * @brief  Enable the NAND device interrupt.
+  * @param  __INSTANCE__:  FMC_NAND instance
+  * @param  __BANK__:      FMC_NAND Bank
+  * @param  __INTERRUPT__: FMC_NAND interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FMC_IT_LEVEL: Interrupt level.
+  *            @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+  * @retval None
+  */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__)  ((__INSTANCE__)->SR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the NAND device interrupt.
+  * @param  __INSTANCE__:  FMC_NAND Instance
+  * @param  __BANK__:      FMC_NAND Bank
+  * @param  __INTERRUPT__: FMC_NAND interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FMC_IT_LEVEL: Interrupt level.
+  *            @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+  * @retval None
+  */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__)  ((__INSTANCE__)->SR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Get flag status of the NAND device.
+  * @param  __INSTANCE__: FMC_NAND Instance
+  * @param  __BANK__:     FMC_NAND Bank
+  * @param  __FLAG__: FMC_NAND flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg FMC_FLAG_FEMPT: FIFO empty flag.
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__)  (((__INSTANCE__)->SR &(__FLAG__)) == (__FLAG__))
+/**
+  * @brief  Clear flag status of the NAND device.
+  * @param  __INSTANCE__: FMC_NAND Instance
+  * @param  __BANK__:     FMC_NAND Bank
+  * @param  __FLAG__: FMC_NAND flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg FMC_FLAG_FEMPT: FIFO empty flag.
+  * @retval None
+  */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__)  ((__INSTANCE__)->SR &= ~(__FLAG__))
+#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+/**
+  * @brief  Enable the NAND device interrupt.
+  * @param  __INSTANCE__:  FMC_NAND instance
+  * @param  __BANK__:      FMC_NAND Bank
+  * @param  __INTERRUPT__: FMC_NAND interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FMC_IT_LEVEL: Interrupt level.
+  *            @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+  * @retval None
+  */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__)  (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+                                                                                                      ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+  * @brief  Disable the NAND device interrupt.
+  * @param  __INSTANCE__:  FMC_NAND Instance
+  * @param  __BANK__:      FMC_NAND Bank
+  * @param  __INTERRUPT__: FMC_NAND interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FMC_IT_LEVEL: Interrupt level.
+  *            @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+  * @retval None
+  */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__)  (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+                                                                                                      ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+  * @brief  Get flag status of the NAND device.
+  * @param  __INSTANCE__: FMC_NAND Instance
+  * @param  __BANK__:     FMC_NAND Bank
+  * @param  __FLAG__: FMC_NAND flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg FMC_FLAG_FEMPT: FIFO empty flag.
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__)  (((__BANK__) == FMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+                                                                                                (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+/**
+  * @brief  Clear flag status of the NAND device.
+  * @param  __INSTANCE__: FMC_NAND Instance
+  * @param  __BANK__:     FMC_NAND Bank
+  * @param  __FLAG__: FMC_NAND flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg FMC_FLAG_FEMPT: FIFO empty flag.
+  * @retval None
+  */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__)  (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+                                                                                                  ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+#endif /* defined(STM32F446xx) */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/**
+  * @brief  Enable the PCCARD device interrupt.
+  * @param  __INSTANCE__: FMC_PCCARD instance
+  * @param  __INTERRUPT__: FMC_PCCARD interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FMC_IT_LEVEL: Interrupt level.
+  *            @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+  * @retval None
+  */
+#define __FMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the PCCARD device interrupt.
+  * @param  __INSTANCE__: FMC_PCCARD instance
+  * @param  __INTERRUPT__: FMC_PCCARD interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FMC_IT_LEVEL: Interrupt level.
+  *            @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+  * @retval None
+  */
+#define __FMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Get flag status of the PCCARD device.
+  * @param  __INSTANCE__: FMC_PCCARD instance
+  * @param  __FLAG__: FMC_PCCARD flag
+  *         This parameter can be any combination of the following values:
+  *            @arg  FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg  FMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg  FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg  FMC_FLAG_FEMPT: FIFO empty flag.
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __FMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__)  (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clear flag status of the PCCARD device.
+  * @param  __INSTANCE__: FMC_PCCARD instance
+  * @param  __FLAG__: FMC_PCCARD flag
+  *         This parameter can be any combination of the following values:
+  *            @arg  FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg  FMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg  FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg  FMC_FLAG_FEMPT: FIFO empty flag.
+  * @retval None
+  */
+#define __FMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__)  ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+
+/**
+  * @brief  Enable the SDRAM device interrupt.
+  * @param  __INSTANCE__: FMC_SDRAM instance
+  * @param  __INTERRUPT__: FMC_SDRAM interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+  * @retval None
+  */
+#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->SDRTR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the SDRAM device interrupt.
+  * @param  __INSTANCE__: FMC_SDRAM instance
+  * @param  __INTERRUPT__: FMC_SDRAM interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+  * @retval None
+  */
+#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Get flag status of the SDRAM device.
+  * @param  __INSTANCE__: FMC_SDRAM instance
+  * @param  __FLAG__: FMC_SDRAM flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error.
+  *            @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag.
+  *            @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag.
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__)  (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clear flag status of the SDRAM device.
+  * @param  __INSTANCE__: FMC_SDRAM instance
+  * @param  __FLAG__: FMC_SDRAM flag
+  *         This parameter can be any combination of the following values:
+  *           @arg FMC_SDRAM_FLAG_REFRESH_ERROR
+  * @retval None
+  */
+#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__)  ((__INSTANCE__)->SDRTR |= (__FLAG__))
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_Assert_Macros FSMC Assert Macros
+  * @{
+  */
+#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_NORSRAM_BANK1) || \
+                                   ((BANK) == FMC_NORSRAM_BANK2) || \
+                                   ((BANK) == FMC_NORSRAM_BANK3) || \
+                                   ((BANK) == FMC_NORSRAM_BANK4))
+
+#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
+                              ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE))
+
+#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \
+                                    ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \
+                                    ((__MEMORY__) == FMC_MEMORY_TYPE_NOR))
+
+#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8)  || \
+                                                 ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+                                                 ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \
+                                       ((__MODE__) == FMC_ACCESS_MODE_B) || \
+                                       ((__MODE__) == FMC_ACCESS_MODE_C) || \
+                                       ((__MODE__) == FMC_ACCESS_MODE_D))
+
+#define IS_FMC_NAND_BANK(BANK) (((BANK) == FMC_NAND_BANK2) || \
+                                ((BANK) == FMC_NAND_BANK3))
+
+#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+                                      ((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+
+#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+                                         ((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_16))
+
+#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_NAND_ECC_DISABLE) || \
+                                 ((STATE) == FMC_NAND_ECC_ENABLE))
+
+#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_NAND_ECC_PAGE_SIZE_256BYTE)  || \
+                                   ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_512BYTE)  || \
+                                   ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+                                   ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+                                   ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+                                   ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+
+#define IS_FMC_TCLR_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE)
+
+#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE)
+
+#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE)
+
+#define IS_FMC_PCCARD_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_PCCARD_DEVICE)
+
+#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \
+                                      ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE))
+
+#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
+                                             ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
+
+#if !defined (STM32F446xx)
+#define IS_FMC_WRAP_MODE(__MODE__) (((__MODE__) == FMC_WRAP_MODE_DISABLE) || \
+                                     ((__MODE__) == FMC_WRAP_MODE_ENABLE))
+#endif /* !defined (STM32F446xx) */
+
+#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \
+                                                ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS))
+
+#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \
+                                                ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE))
+
+#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \
+                                          ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE))
+
+#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \
+                                         ((__MODE__) == FMC_EXTENDED_MODE_ENABLE))
+
+#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+                                     ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
+
+#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \
+                                        ((__BURST__) == FMC_WRITE_BURST_ENABLE))
+
+#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+                                        ((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+
+#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15)
+
+#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 15))
+
+#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 255))
+
+#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15)
+
+#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1) && ((__LATENCY__) <= 17))
+
+#define IS_FMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16))
+
+#define IS_FMC_SDRAM_BANK(BANK) (((BANK) == FMC_SDRAM_BANK1) || \
+                                 ((BANK) == FMC_SDRAM_BANK2))
+
+#define IS_FMC_COLUMNBITS_NUMBER(COLUMN) (((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_8)  || \
+                                          ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_9)  || \
+                                          ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \
+                                          ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_11))
+
+#define IS_FMC_ROWBITS_NUMBER(ROW) (((ROW) == FMC_SDRAM_ROW_BITS_NUM_11) || \
+                                    ((ROW) == FMC_SDRAM_ROW_BITS_NUM_12) || \
+                                    ((ROW) == FMC_SDRAM_ROW_BITS_NUM_13))
+
+#define IS_FMC_SDMEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_8)  || \
+                                      ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \
+                                      ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FMC_INTERNALBANK_NUMBER(NUMBER) (((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \
+                                            ((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_4))
+
+
+#define IS_FMC_CAS_LATENCY(LATENCY) (((LATENCY) == FMC_SDRAM_CAS_LATENCY_1) || \
+                                     ((LATENCY) == FMC_SDRAM_CAS_LATENCY_2) || \
+                                     ((LATENCY) == FMC_SDRAM_CAS_LATENCY_3))
+
+#define IS_FMC_SDCLOCK_PERIOD(PERIOD) (((PERIOD) == FMC_SDRAM_CLOCK_DISABLE)  || \
+                                       ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_2) || \
+                                       ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_3))
+
+#define IS_FMC_READ_BURST(RBURST) (((RBURST) == FMC_SDRAM_RBURST_DISABLE) || \
+                                   ((RBURST) == FMC_SDRAM_RBURST_ENABLE))
+
+
+#define IS_FMC_READPIPE_DELAY(DELAY) (((DELAY) == FMC_SDRAM_RPIPE_DELAY_0) || \
+                                      ((DELAY) == FMC_SDRAM_RPIPE_DELAY_1) || \
+                                      ((DELAY) == FMC_SDRAM_RPIPE_DELAY_2))
+
+#define IS_FMC_LOADTOACTIVE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+
+#define IS_FMC_EXITSELFREFRESH_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+
+#define IS_FMC_SELFREFRESH_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16))
+
+#define IS_FMC_ROWCYCLE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+
+#define IS_FMC_WRITE_RECOVERY_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16))
+
+#define IS_FMC_RP_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+
+#define IS_FMC_RCD_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+
+#define IS_FMC_COMMAND_MODE(COMMAND) (((COMMAND) == FMC_SDRAM_CMD_NORMAL_MODE)      || \
+                                      ((COMMAND) == FMC_SDRAM_CMD_CLK_ENABLE)       || \
+                                      ((COMMAND) == FMC_SDRAM_CMD_PALL)             || \
+                                      ((COMMAND) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \
+                                      ((COMMAND) == FMC_SDRAM_CMD_LOAD_MODE)        || \
+                                      ((COMMAND) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \
+                                      ((COMMAND) == FMC_SDRAM_CMD_POWERDOWN_MODE))
+
+#define IS_FMC_COMMAND_TARGET(TARGET) (((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1) || \
+                                       ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK2) || \
+                                       ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1_2))
+
+#define IS_FMC_AUTOREFRESH_NUMBER(NUMBER) (((NUMBER) > 0) && ((NUMBER) <= 16))
+
+#define IS_FMC_MODE_REGISTER(CONTENT) ((CONTENT) <= 8191)
+
+#define IS_FMC_REFRESH_RATE(RATE) ((RATE) <= 8191)
+
+#define IS_FMC_SDRAM_DEVICE(INSTANCE) ((INSTANCE) == FMC_SDRAM_DEVICE)
+
+#define IS_FMC_WRITE_PROTECTION(WRITE) (((WRITE) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \
+                                        ((WRITE) == FMC_SDRAM_WRITE_PROTECTION_ENABLE))
+
+#if defined (STM32F446xx)
+#define IS_FMC_PAGESIZE(SIZE) (((SIZE) == FMC_PAGE_SIZE_NONE) || \
+                               ((SIZE) == FMC_PAGE_SIZE_128) || \
+                               ((SIZE) == FMC_PAGE_SIZE_256) || \
+                               ((SIZE) == FMC_PAGE_SIZE_1024))
+
+#define IS_FMC_WRITE_FIFO(FIFO) (((FIFO) == FMC_WRITE_FIFO_DISABLE) || \
+                                 ((FIFO) == FMC_WRITE_FIFO_ENABLE))
+#endif /* defined (STM32F446xx) */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Functions FMC LL Private Functions
+  *  @{
+  */
+
+/** @defgroup FMC_LL_NORSRAM  NOR SRAM
+  *  @{
+  */
+/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef  FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef  FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_NAND NAND
+  *  @{
+  */
+/** @defgroup FMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef  FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_NAND_Private_Functions_Group2 NAND Control functions
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup FMC_LL_PCCARD PCCARD
+  *  @{
+  */
+/** @defgroup FMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef  FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef  FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef  FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef  FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @defgroup FMC_LL_SDRAM SDRAM
+  *  @{
+  */
+/** @defgroup FMC_LL_SDRAM_Private_Functions_Group1 SDRAM Initialization/de-initialization functions
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init);
+HAL_StatusTypeDef  FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_SDRAM_Private_Functions_Group2 SDRAM Control functions
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef  FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate);
+HAL_StatusTypeDef  FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber);
+uint32_t           FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_FMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h
new file mode 100644
index 0000000..5845ab3
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h
@@ -0,0 +1,978 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_ll_fsmc.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of FSMC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_FSMC_H
+#define __STM32F4xx_LL_FSMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FSMC_LL
+  * @{
+  */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/* Private types -------------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Types FSMC Private Types
+  * @{
+  */
+
+/**
+  * @brief FSMC NORSRAM Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t NSBank;                       /*!< Specifies the NORSRAM memory device that will be used.
+                                              This parameter can be a value of @ref FSMC_NORSRAM_Bank                     */
+
+  uint32_t DataAddressMux;               /*!< Specifies whether the address and data values are
+                                              multiplexed on the data bus or not.
+                                              This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing    */
+
+  uint32_t MemoryType;                   /*!< Specifies the type of external memory attached to
+                                              the corresponding memory device.
+                                              This parameter can be a value of @ref FSMC_Memory_Type                      */
+
+  uint32_t MemoryDataWidth;              /*!< Specifies the external memory device width.
+                                              This parameter can be a value of @ref FSMC_NORSRAM_Data_Width               */
+
+  uint32_t BurstAccessMode;              /*!< Enables or disables the burst access mode for Flash memory,
+                                              valid only with synchronous burst Flash memories.
+                                              This parameter can be a value of @ref FSMC_Burst_Access_Mode                */
+
+  uint32_t WaitSignalPolarity;           /*!< Specifies the wait signal polarity, valid only when accessing
+                                              the Flash memory in burst mode.
+                                              This parameter can be a value of @ref FSMC_Wait_Signal_Polarity             */
+
+  uint32_t WrapMode;                     /*!< Enables or disables the Wrapped burst access mode for Flash
+                                              memory, valid only when accessing Flash memories in burst mode.
+                                              This parameter can be a value of @ref FSMC_Wrap_Mode                        */
+
+  uint32_t WaitSignalActive;             /*!< Specifies if the wait signal is asserted by the memory one
+                                              clock cycle before the wait state or during the wait state,
+                                              valid only when accessing memories in burst mode.
+                                              This parameter can be a value of @ref FSMC_Wait_Timing                      */
+
+  uint32_t WriteOperation;               /*!< Enables or disables the write operation in the selected device by the FSMC.
+                                              This parameter can be a value of @ref FSMC_Write_Operation                  */
+
+  uint32_t WaitSignal;                   /*!< Enables or disables the wait state insertion via wait
+                                              signal, valid for Flash memory access in burst mode.
+                                              This parameter can be a value of @ref FSMC_Wait_Signal                      */
+
+  uint32_t ExtendedMode;                 /*!< Enables or disables the extended mode.
+                                              This parameter can be a value of @ref FSMC_Extended_Mode                    */
+
+  uint32_t AsynchronousWait;             /*!< Enables or disables wait signal during asynchronous transfers,
+                                              valid only with asynchronous Flash memories.
+                                              This parameter can be a value of @ref FSMC_AsynchronousWait                 */
+
+  uint32_t WriteBurst;                   /*!< Enables or disables the write burst operation.
+                                              This parameter can be a value of @ref FSMC_Write_Burst                      */
+
+}FSMC_NORSRAM_InitTypeDef;
+
+/**
+  * @brief FSMC NORSRAM Timing parameters structure definition
+  */
+typedef struct
+{
+  uint32_t AddressSetupTime;             /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the address setup time.
+                                              This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+                                              @note This parameter is not used with synchronous NOR Flash memories.      */
+
+  uint32_t AddressHoldTime;              /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the address hold time.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+                                              @note This parameter is not used with synchronous NOR Flash memories.      */
+
+  uint32_t DataSetupTime;                /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the data setup time.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+                                              @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+                                              NOR Flash memories.                                                        */
+
+  uint32_t BusTurnAroundDuration;        /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the bus turnaround.
+                                              This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+                                              @note This parameter is only used for multiplexed NOR Flash memories.      */
+
+  uint32_t CLKDivision;                  /*!< Defines the period of CLK clock output signal, expressed in number of
+                                              HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+                                              @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+                                              accesses.                                                                  */
+
+  uint32_t DataLatency;                  /*!< Defines the number of memory clock cycles to issue
+                                              to the memory before getting the first data.
+                                              The parameter value depends on the memory type as shown below:
+                                              - It must be set to 0 in case of a CRAM
+                                              - It is don't care in asynchronous NOR, SRAM or ROM accesses
+                                              - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+                                                with synchronous burst mode enable                                       */
+
+  uint32_t AccessMode;                   /*!< Specifies the asynchronous access mode.
+                                              This parameter can be a value of @ref FSMC_Access_Mode                      */
+
+}FSMC_NORSRAM_TimingTypeDef;
+
+/**
+  * @brief FSMC NAND Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t NandBank;               /*!< Specifies the NAND memory device that will be used.
+                                        This parameter can be a value of @ref FSMC_NAND_Bank                   */
+
+  uint32_t Waitfeature;            /*!< Enables or disables the Wait feature for the NAND Memory device.
+                                        This parameter can be any value of @ref FSMC_Wait_feature              */
+
+  uint32_t MemoryDataWidth;        /*!< Specifies the external memory device width.
+                                        This parameter can be any value of @ref FSMC_NAND_Data_Width           */
+
+  uint32_t EccComputation;         /*!< Enables or disables the ECC computation.
+                                        This parameter can be any value of @ref FSMC_ECC                       */
+
+  uint32_t ECCPageSize;            /*!< Defines the page size for the extended ECC.
+                                        This parameter can be any value of @ref FSMC_ECC_Page_Size             */
+
+  uint32_t TCLRSetupTime;          /*!< Defines the number of HCLK cycles to configure the
+                                        delay between CLE low and RE low.
+                                        This parameter can be a value between Min_Data = 0 and Max_Data = 255  */
+
+  uint32_t TARSetupTime;           /*!< Defines the number of HCLK cycles to configure the
+                                        delay between ALE low and RE low.
+                                        This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_NAND_InitTypeDef;
+
+/**
+  * @brief FSMC NAND/PCCARD Timing parameters structure definition
+  */
+typedef struct
+{
+  uint32_t SetupTime;            /*!< Defines the number of HCLK cycles to setup address before
+                                      the command assertion for NAND-Flash read or write access
+                                      to common/Attribute or I/O memory space (depending on
+                                      the memory space timing to be configured).
+                                      This parameter can be a value between Min_Data = 0 and Max_Data = 255    */
+
+  uint32_t WaitSetupTime;        /*!< Defines the minimum number of HCLK cycles to assert the
+                                      command for NAND-Flash read or write access to
+                                      common/Attribute or I/O memory space (depending on the
+                                      memory space timing to be configured).
+                                      This parameter can be a number between Min_Data = 0 and Max_Data = 255   */
+
+  uint32_t HoldSetupTime;        /*!< Defines the number of HCLK clock cycles to hold address
+                                      (and data for write access) after the command de-assertion
+                                      for NAND-Flash read or write access to common/Attribute
+                                      or I/O memory space (depending on the memory space timing
+                                      to be configured).
+                                      This parameter can be a number between Min_Data = 0 and Max_Data = 255   */
+
+  uint32_t HiZSetupTime;         /*!< Defines the number of HCLK clock cycles during which the
+                                      data bus is kept in HiZ after the start of a NAND-Flash
+                                      write access to common/Attribute or I/O memory space (depending
+                                      on the memory space timing to be configured).
+                                      This parameter can be a number between Min_Data = 0 and Max_Data = 255   */
+
+}FSMC_NAND_PCC_TimingTypeDef;
+
+/**
+  * @brief  FSMC NAND Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Waitfeature;            /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+                                        This parameter can be any value of @ref FSMC_Wait_feature              */
+
+  uint32_t TCLRSetupTime;          /*!< Defines the number of HCLK cycles to configure the
+                                        delay between CLE low and RE low.
+                                        This parameter can be a value between Min_Data = 0 and Max_Data = 255  */
+
+  uint32_t TARSetupTime;           /*!< Defines the number of HCLK cycles to configure the
+                                        delay between ALE low and RE low.
+                                        This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_PCCARD_InitTypeDef;
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Constants FSMC Private Constants
+  * @{
+  */
+
+/** @defgroup FSMC_LL_NOR_SRAM_Controller FSMC NOR/SRAM Controller
+  * @{
+  */
+/** @defgroup FSMC_NORSRAM_Bank FSMC NOR/SRAM Bank
+  * @{
+  */
+#define FSMC_NORSRAM_BANK1                       ((uint32_t)0x00000000)
+#define FSMC_NORSRAM_BANK2                       ((uint32_t)0x00000002)
+#define FSMC_NORSRAM_BANK3                       ((uint32_t)0x00000004)
+#define FSMC_NORSRAM_BANK4                       ((uint32_t)0x00000006)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Data_Address_Bus_Multiplexing FSMC Data Address Bus Multiplexing
+  * @{
+  */
+#define FSMC_DATA_ADDRESS_MUX_DISABLE            ((uint32_t)0x00000000)
+#define FSMC_DATA_ADDRESS_MUX_ENABLE             ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Memory_Type FSMC Memory Type
+  * @{
+  */
+#define FSMC_MEMORY_TYPE_SRAM                    ((uint32_t)0x00000000)
+#define FSMC_MEMORY_TYPE_PSRAM                   ((uint32_t)0x00000004)
+#define FSMC_MEMORY_TYPE_NOR                     ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_NORSRAM_Data_Width FSMC NOR/SRAM Data Width
+  * @{
+  */
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_8             ((uint32_t)0x00000000)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_16            ((uint32_t)0x00000010)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_32            ((uint32_t)0x00000020)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_NORSRAM_Flash_Access FSMC NOR/SRAM Flash Access
+  * @{
+  */
+#define FSMC_NORSRAM_FLASH_ACCESS_ENABLE         ((uint32_t)0x00000040)
+#define FSMC_NORSRAM_FLASH_ACCESS_DISABLE        ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Burst_Access_Mode FSMC Burst Access Mode
+  * @{
+  */
+#define FSMC_BURST_ACCESS_MODE_DISABLE           ((uint32_t)0x00000000)
+#define FSMC_BURST_ACCESS_MODE_ENABLE            ((uint32_t)0x00000100)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_Signal_Polarity FSMC Wait Signal Polarity
+  * @{
+  */
+#define FSMC_WAIT_SIGNAL_POLARITY_LOW            ((uint32_t)0x00000000)
+#define FSMC_WAIT_SIGNAL_POLARITY_HIGH           ((uint32_t)0x00000200)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wrap_Mode FSMC Wrap Mode
+  * @{
+  */
+#define FSMC_WRAP_MODE_DISABLE                   ((uint32_t)0x00000000)
+#define FSMC_WRAP_MODE_ENABLE                    ((uint32_t)0x00000400)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_Timing FSMC Wait Timing
+  * @{
+  */
+#define FSMC_WAIT_TIMING_BEFORE_WS               ((uint32_t)0x00000000)
+#define FSMC_WAIT_TIMING_DURING_WS               ((uint32_t)0x00000800)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Write_Operation FSMC Write Operation
+  * @{
+  */
+#define FSMC_WRITE_OPERATION_DISABLE             ((uint32_t)0x00000000)
+#define FSMC_WRITE_OPERATION_ENABLE              ((uint32_t)0x00001000)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_Signal FSMC Wait Signal
+  * @{
+  */
+#define FSMC_WAIT_SIGNAL_DISABLE                 ((uint32_t)0x00000000)
+#define FSMC_WAIT_SIGNAL_ENABLE                  ((uint32_t)0x00002000)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Extended_Mode FSMC Extended Mode
+  * @{
+  */
+#define FSMC_EXTENDED_MODE_DISABLE               ((uint32_t)0x00000000)
+#define FSMC_EXTENDED_MODE_ENABLE                ((uint32_t)0x00004000)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_AsynchronousWait FSMC Asynchronous Wait
+  * @{
+  */
+#define FSMC_ASYNCHRONOUS_WAIT_DISABLE           ((uint32_t)0x00000000)
+#define FSMC_ASYNCHRONOUS_WAIT_ENABLE            ((uint32_t)0x00008000)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Write_Burst FSMC Write Burst
+  * @{
+  */
+#define FSMC_WRITE_BURST_DISABLE                 ((uint32_t)0x00000000)
+#define FSMC_WRITE_BURST_ENABLE                  ((uint32_t)0x00080000)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Continous_Clock FSMC Continous Clock
+  * @{
+  */
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ONLY          ((uint32_t)0x00000000)
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC         ((uint32_t)0x00100000)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Access_Mode FSMC Access Mode
+  * @{
+  */
+#define FSMC_ACCESS_MODE_A                        ((uint32_t)0x00000000)
+#define FSMC_ACCESS_MODE_B                        ((uint32_t)0x10000000)
+#define FSMC_ACCESS_MODE_C                        ((uint32_t)0x20000000)
+#define FSMC_ACCESS_MODE_D                        ((uint32_t)0x30000000)
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_NAND_Controller FSMC NAND and PCCARD Controller
+  * @{
+  */
+/** @defgroup FSMC_NAND_Bank FSMC NAND Bank
+  * @{
+  */
+#define FSMC_NAND_BANK2                          ((uint32_t)0x00000010)
+#define FSMC_NAND_BANK3                          ((uint32_t)0x00000100)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_feature FSMC Wait feature
+  * @{
+  */
+#define FSMC_NAND_PCC_WAIT_FEATURE_DISABLE           ((uint32_t)0x00000000)
+#define FSMC_NAND_PCC_WAIT_FEATURE_ENABLE            ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_PCR_Memory_Type FSMC PCR Memory Type
+  * @{
+  */
+#define FSMC_PCR_MEMORY_TYPE_PCCARD        ((uint32_t)0x00000000)
+#define FSMC_PCR_MEMORY_TYPE_NAND          ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_NAND_Data_Width FSMC NAND Data Width
+  * @{
+  */
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_8                ((uint32_t)0x00000000)
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_16               ((uint32_t)0x00000010)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_ECC FSMC ECC
+  * @{
+  */
+#define FSMC_NAND_ECC_DISABLE                    ((uint32_t)0x00000000)
+#define FSMC_NAND_ECC_ENABLE                     ((uint32_t)0x00000040)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_ECC_Page_Size FSMC ECC Page Size
+  * @{
+  */
+#define FSMC_NAND_ECC_PAGE_SIZE_256BYTE          ((uint32_t)0x00000000)
+#define FSMC_NAND_ECC_PAGE_SIZE_512BYTE          ((uint32_t)0x00020000)
+#define FSMC_NAND_ECC_PAGE_SIZE_1024BYTE         ((uint32_t)0x00040000)
+#define FSMC_NAND_ECC_PAGE_SIZE_2048BYTE         ((uint32_t)0x00060000)
+#define FSMC_NAND_ECC_PAGE_SIZE_4096BYTE         ((uint32_t)0x00080000)
+#define FSMC_NAND_ECC_PAGE_SIZE_8192BYTE         ((uint32_t)0x000A0000)
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_Interrupt_definition FSMC Interrupt definition
+  * @{
+  */
+#define FSMC_IT_RISING_EDGE                ((uint32_t)0x00000008)
+#define FSMC_IT_LEVEL                      ((uint32_t)0x00000010)
+#define FSMC_IT_FALLING_EDGE               ((uint32_t)0x00000020)
+#define FSMC_IT_REFRESH_ERROR              ((uint32_t)0x00004000)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_Flag_definition  FSMC Flag definition
+  * @{
+  */
+#define FSMC_FLAG_RISING_EDGE                    ((uint32_t)0x00000001)
+#define FSMC_FLAG_LEVEL                          ((uint32_t)0x00000002)
+#define FSMC_FLAG_FALLING_EDGE                   ((uint32_t)0x00000004)
+#define FSMC_FLAG_FEMPT                          ((uint32_t)0x00000040)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_Alias_definition  FSMC Alias definition
+  * @{
+  */
+#define FSMC_NORSRAM_TypeDef                  FSMC_Bank1_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TypeDef         FSMC_Bank1E_TypeDef
+#define FSMC_NAND_TypeDef                     FSMC_Bank2_3_TypeDef
+#define FSMC_PCCARD_TypeDef                   FSMC_Bank4_TypeDef
+
+#define FSMC_NORSRAM_DEVICE                   FSMC_Bank1
+#define FSMC_NORSRAM_EXTENDED_DEVICE          FSMC_Bank1E
+#define FSMC_NAND_DEVICE                      FSMC_Bank2_3
+#define FSMC_PCCARD_DEVICE                    FSMC_Bank4
+
+#define FMC_NORSRAM_TypeDef                   FSMC_NORSRAM_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef          FSMC_NORSRAM_EXTENDED_TypeDef
+#define FMC_NORSRAM_InitTypeDef               FSMC_NORSRAM_InitTypeDef
+#define FMC_NORSRAM_TimingTypeDef             FSMC_NORSRAM_TimingTypeDef
+
+#define FMC_NORSRAM_Init                      FSMC_NORSRAM_Init
+#define FMC_NORSRAM_Timing_Init               FSMC_NORSRAM_Timing_Init
+#define FMC_NORSRAM_Extended_Timing_Init      FSMC_NORSRAM_Extended_Timing_Init
+#define FMC_NORSRAM_DeInit                    FSMC_NORSRAM_DeInit
+#define FMC_NORSRAM_WriteOperation_Enable     FSMC_NORSRAM_WriteOperation_Enable
+#define FMC_NORSRAM_WriteOperation_Disable    FSMC_NORSRAM_WriteOperation_Disable
+
+#define __FMC_NORSRAM_ENABLE                  __FSMC_NORSRAM_ENABLE
+#define __FMC_NORSRAM_DISABLE                 __FSMC_NORSRAM_DISABLE
+
+#define FMC_NAND_InitTypeDef                  FSMC_NAND_InitTypeDef
+#define FMC_PCCARD_InitTypeDef                FSMC_PCCARD_InitTypeDef
+#define FMC_NAND_PCC_TimingTypeDef            FSMC_NAND_PCC_TimingTypeDef
+
+#define FMC_NAND_Init                         FSMC_NAND_Init
+#define FMC_NAND_CommonSpace_Timing_Init      FSMC_NAND_CommonSpace_Timing_Init
+#define FMC_NAND_AttributeSpace_Timing_Init   FSMC_NAND_AttributeSpace_Timing_Init
+#define FMC_NAND_DeInit                       FSMC_NAND_DeInit
+#define FMC_NAND_ECC_Enable                   FSMC_NAND_ECC_Enable
+#define FMC_NAND_ECC_Disable                  FSMC_NAND_ECC_Disable
+#define FMC_NAND_GetECC                       FSMC_NAND_GetECC
+#define FMC_PCCARD_Init                       FSMC_PCCARD_Init
+#define FMC_PCCARD_CommonSpace_Timing_Init    FSMC_PCCARD_CommonSpace_Timing_Init
+#define FMC_PCCARD_AttributeSpace_Timing_Init FSMC_PCCARD_AttributeSpace_Timing_Init
+#define FMC_PCCARD_IOSpace_Timing_Init        FSMC_PCCARD_IOSpace_Timing_Init
+#define FMC_PCCARD_DeInit                     FSMC_PCCARD_DeInit
+
+#define __FMC_NAND_ENABLE                     __FSMC_NAND_ENABLE
+#define __FMC_NAND_DISABLE                    __FSMC_NAND_DISABLE
+#define __FMC_PCCARD_ENABLE                   __FSMC_PCCARD_ENABLE
+#define __FMC_PCCARD_DISABLE                  __FSMC_PCCARD_DISABLE
+#define __FMC_NAND_ENABLE_IT                  __FSMC_NAND_ENABLE_IT
+#define __FMC_NAND_DISABLE_IT                 __FSMC_NAND_DISABLE_IT
+#define __FMC_NAND_GET_FLAG                   __FSMC_NAND_GET_FLAG
+#define __FMC_NAND_CLEAR_FLAG                 __FSMC_NAND_CLEAR_FLAG
+#define __FMC_PCCARD_ENABLE_IT                __FSMC_PCCARD_ENABLE_IT
+#define __FMC_PCCARD_DISABLE_IT               __FSMC_PCCARD_DISABLE_IT
+#define __FMC_PCCARD_GET_FLAG                 __FSMC_PCCARD_GET_FLAG
+#define __FMC_PCCARD_CLEAR_FLAG               __FSMC_PCCARD_CLEAR_FLAG
+
+#define FMC_NORSRAM_TypeDef                   FSMC_NORSRAM_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef          FSMC_NORSRAM_EXTENDED_TypeDef
+#define FMC_NAND_TypeDef                      FSMC_NAND_TypeDef
+#define FMC_PCCARD_TypeDef                    FSMC_PCCARD_TypeDef
+
+#define FMC_NORSRAM_DEVICE                    FSMC_NORSRAM_DEVICE
+#define FMC_NORSRAM_EXTENDED_DEVICE           FSMC_NORSRAM_EXTENDED_DEVICE
+#define FMC_NAND_DEVICE                       FSMC_NAND_DEVICE
+#define FMC_PCCARD_DEVICE                     FSMC_PCCARD_DEVICE
+
+#define FMC_NAND_BANK2                        FSMC_NAND_BANK2
+
+#define FMC_NORSRAM_BANK1                     FSMC_NORSRAM_BANK1
+#define FMC_NORSRAM_BANK2                     FSMC_NORSRAM_BANK2
+#define FMC_NORSRAM_BANK3                     FSMC_NORSRAM_BANK3
+
+#define FMC_IT_RISING_EDGE                    FSMC_IT_RISING_EDGE
+#define FMC_IT_LEVEL                          FSMC_IT_LEVEL
+#define FMC_IT_FALLING_EDGE                   FSMC_IT_FALLING_EDGE
+#define FMC_IT_REFRESH_ERROR                  FSMC_IT_REFRESH_ERROR
+
+#define FMC_FLAG_RISING_EDGE                  FSMC_FLAG_RISING_EDGE
+#define FMC_FLAG_LEVEL                        FSMC_FLAG_LEVEL
+#define FMC_FLAG_FALLING_EDGE                 FSMC_FLAG_FALLING_EDGE
+#define FMC_FLAG_FEMPT                        FSMC_FLAG_FEMPT
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Macros FSMC Private Macros
+  * @{
+  */
+
+/** @defgroup FSMC_LL_NOR_Macros FSMC NOR/SRAM Exported Macros
+ *  @brief macros to handle NOR device enable/disable and read/write operations
+ *  @{
+ */
+/**
+  * @brief  Enable the NORSRAM device access.
+  * @param  __INSTANCE__: FSMC_NORSRAM Instance
+  * @param  __BANK__: FSMC_NORSRAM Bank
+  * @retval none
+  */
+#define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__)  ((__INSTANCE__)->BTCR[(__BANK__)] |= FSMC_BCR1_MBKEN)
+
+/**
+  * @brief  Disable the NORSRAM device access.
+  * @param  __INSTANCE__: FSMC_NORSRAM Instance
+  * @param  __BANK__: FSMC_NORSRAM Bank
+  * @retval none
+  */
+#define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FSMC_BCR1_MBKEN)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_NAND_Macros FSMC NAND Macros
+ *  @brief macros to handle NAND device enable/disable
+ *  @{
+ */
+/**
+  * @brief  Enable the NAND device access.
+  * @param  __INSTANCE__: FSMC_NAND Instance
+  * @param  __BANK__: FSMC_NAND Bank
+  * @retval none
+  */
+#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__)  (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FSMC_PCR2_PBKEN): \
+                                                    ((__INSTANCE__)->PCR3 |= FSMC_PCR3_PBKEN))
+
+/**
+  * @brief  Disable the NAND device access.
+  * @param  __INSTANCE__: FSMC_NAND Instance
+  * @param  __BANK__: FSMC_NAND Bank
+  * @retval none
+  */
+#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FSMC_PCR2_PBKEN): \
+                                                   ((__INSTANCE__)->PCR3 &= ~FSMC_PCR3_PBKEN))
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_PCCARD_Macros FSMC PCCARD Macros
+  *  @brief macros to handle SRAM read/write operations
+  *  @{
+  */
+/**
+  * @brief  Enable the PCCARD device access.
+  * @param  __INSTANCE__: FSMC_PCCARD Instance
+  * @retval none
+  */
+#define __FSMC_PCCARD_ENABLE(__INSTANCE__)  ((__INSTANCE__)->PCR4 |= FSMC_PCR4_PBKEN)
+
+/**
+  * @brief  Disable the PCCARD device access.
+  * @param  __INSTANCE__: FSMC_PCCARD Instance
+  * @retval none
+  */
+#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCR4_PBKEN)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_Flag_Interrupt_Macros FSMC Flag&Interrupt Macros
+ *  @brief macros to handle FSMC flags and interrupts
+ * @{
+ */
+/**
+  * @brief  Enable the NAND device interrupt.
+  * @param  __INSTANCE__: FSMC_NAND Instance
+  * @param  __BANK__: FSMC_NAND Bank
+  * @param  __INTERRUPT__: FSMC_NAND interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FSMC_IT_LEVEL: Interrupt level.
+  *            @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+  * @retval None
+  */
+#define __FSMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__)  (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+                                                                                                      ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+  * @brief  Disable the NAND device interrupt.
+  * @param  __INSTANCE__: FSMC_NAND Instance
+  * @param  __BANK__: FSMC_NAND Bank
+  * @param  __INTERRUPT__: FSMC_NAND interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FSMC_IT_LEVEL: Interrupt level.
+  *            @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+  * @retval None
+  */
+#define __FSMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__)  (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+                                                                                                      ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+  * @brief  Get flag status of the NAND device.
+  * @param  __INSTANCE__: FSMC_NAND Instance
+  * @param  __BANK__    : FSMC_NAND Bank
+  * @param  __FLAG__    : FSMC_NAND flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __FSMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__)  (((__BANK__) == FSMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+                                                                                                (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+/**
+  * @brief  Clear flag status of the NAND device.
+  * @param  __INSTANCE__: FSMC_NAND Instance
+  * @param  __BANK__: FSMC_NAND Bank
+  * @param  __FLAG__: FSMC_NAND flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+  * @retval None
+  */
+#define __FSMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__)  (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+                                                                                                  ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+/**
+  * @brief  Enable the PCCARD device interrupt.
+  * @param  __INSTANCE__: FSMC_PCCARD Instance
+  * @param  __INTERRUPT__: FSMC_PCCARD interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FSMC_IT_LEVEL: Interrupt level.
+  *            @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+  * @retval None
+  */
+#define __FSMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the PCCARD device interrupt.
+  * @param  __INSTANCE__: FSMC_PCCARD Instance
+  * @param  __INTERRUPT__: FSMC_PCCARD interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FSMC_IT_LEVEL: Interrupt level.
+  *            @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+  * @retval None
+  */
+#define __FSMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Get flag status of the PCCARD device.
+  * @param  __INSTANCE__: FSMC_PCCARD Instance
+  * @param  __FLAG__: FSMC_PCCARD flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __FSMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__)  (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clear flag status of the PCCARD device.
+  * @param  __INSTANCE__: FSMC_PCCARD Instance
+  * @param  __FLAG__: FSMC_PCCARD flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+  * @retval None
+  */
+#define __FSMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__)  ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_Assert_Macros FSMC Assert Macros
+  * @{
+  */
+#define IS_FSMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FSMC_NORSRAM_BANK1) || \
+                                        ((__BANK__) == FSMC_NORSRAM_BANK2) || \
+                                        ((__BANK__) == FSMC_NORSRAM_BANK3) || \
+                                        ((__BANK__) == FSMC_NORSRAM_BANK4))
+
+#define IS_FSMC_MUX(__MUX__) (((__MUX__) == FSMC_DATA_ADDRESS_MUX_DISABLE) || \
+                              ((__MUX__) == FSMC_DATA_ADDRESS_MUX_ENABLE))
+
+#define IS_FSMC_MEMORY(__MEMORY__) (((__MEMORY__) == FSMC_MEMORY_TYPE_SRAM) || \
+                                    ((__MEMORY__) == FSMC_MEMORY_TYPE_PSRAM)|| \
+                                    ((__MEMORY__) == FSMC_MEMORY_TYPE_NOR))
+
+#define IS_FSMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_8)  || \
+                                                 ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+                                                 ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FSMC_ACCESS_MODE(__MODE__) (((__MODE__) == FSMC_ACCESS_MODE_A) || \
+                                       ((__MODE__) == FSMC_ACCESS_MODE_B) || \
+                                       ((__MODE__) == FSMC_ACCESS_MODE_C) || \
+                                       ((__MODE__) == FSMC_ACCESS_MODE_D))
+
+#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_NAND_BANK2) || \
+                                ((BANK) == FSMC_NAND_BANK3))
+
+#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+                                      ((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+
+#define IS_FSMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+                                         ((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_16))
+
+#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_NAND_ECC_DISABLE) || \
+                                 ((STATE) == FSMC_NAND_ECC_ENABLE))
+
+#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_256BYTE)  || \
+                                   ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_512BYTE)  || \
+                                   ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+                                   ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+                                   ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+                                   ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+
+#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FSMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_DEVICE)
+
+#define IS_FSMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_EXTENDED_DEVICE)
+
+#define IS_FSMC_NAND_DEVICE(INSTANCE) ((INSTANCE) == FSMC_NAND_DEVICE)
+
+#define IS_FSMC_PCCARD_DEVICE(INSTANCE) ((INSTANCE) == FSMC_PCCARD_DEVICE)
+
+#define IS_FSMC_BURSTMODE(__STATE__) (((__STATE__) == FSMC_BURST_ACCESS_MODE_DISABLE) || \
+                                      ((__STATE__) == FSMC_BURST_ACCESS_MODE_ENABLE))
+
+#define IS_FSMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_LOW) || \
+                                             ((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_HIGH))
+
+#define IS_FSMC_WRAP_MODE(__MODE__) (((__MODE__) == FSMC_WRAP_MODE_DISABLE) || \
+                                     ((__MODE__) == FSMC_WRAP_MODE_ENABLE))
+
+#define IS_FSMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FSMC_WAIT_TIMING_BEFORE_WS) || \
+                                                ((__ACTIVE__) == FSMC_WAIT_TIMING_DURING_WS))
+
+#define IS_FSMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FSMC_WRITE_OPERATION_DISABLE) || \
+                                                ((__OPERATION__) == FSMC_WRITE_OPERATION_ENABLE))
+
+#define IS_FSMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FSMC_WAIT_SIGNAL_DISABLE) || \
+                                          ((__SIGNAL__) == FSMC_WAIT_SIGNAL_ENABLE))
+
+#define IS_FSMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FSMC_EXTENDED_MODE_DISABLE) || \
+                                         ((__MODE__) == FSMC_EXTENDED_MODE_ENABLE))
+
+#define IS_FSMC_ASYNWAIT(__STATE__) (((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+                                     ((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_ENABLE))
+
+#define IS_FSMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1) && ((__LATENCY__) <= 17))
+
+#define IS_FSMC_WRITE_BURST(__BURST__) (((__BURST__) == FSMC_WRITE_BURST_DISABLE) || \
+                                        ((__BURST__) == FSMC_WRITE_BURST_ENABLE))
+
+#define IS_FSMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15)
+
+#define IS_FSMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 15))
+
+#define IS_FSMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 255))
+
+#define IS_FSMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15)
+
+#define IS_FSMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+                                         ((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+
+#define IS_FSMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16))
+
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Functions FSMC LL Private Functions
+  *  @{
+  */
+
+/** @defgroup FSMC_LL_NORSRAM  NOR SRAM
+  *  @{
+  */
+
+/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions
+  *  @{
+  */
+HAL_StatusTypeDef  FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef  FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef  FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions
+  *  @{
+  */
+HAL_StatusTypeDef  FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_NAND NAND
+  *  @{
+  */
+/** @defgroup FSMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions
+  *  @{
+  */
+HAL_StatusTypeDef  FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef  FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_NAND_Private_Functions_Group2 NAND Control functions
+  *  @{
+  */
+HAL_StatusTypeDef  FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_LL_PCCARD PCCARD
+  *  @{
+  */
+/** @defgroup FSMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions
+  *  @{
+  */
+HAL_StatusTypeDef  FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef  FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef  FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef  FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef  FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_FSMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h
new file mode 100644
index 0000000..493cd93
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h
@@ -0,0 +1,908 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_ll_sdmmc.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of SDMMC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_SDMMC_H
+#define __STM32F4xx_LL_SDMMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_Driver
+  * @{
+  */
+
+/** @addtogroup SDMMC_LL
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types
+  * @{
+  */
+
+/**
+  * @brief  SDMMC Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t ClockEdge;            /*!< Specifies the clock transition on which the bit capture is made.
+                                      This parameter can be a value of @ref SDIO_Clock_Edge                 */
+
+  uint32_t ClockBypass;          /*!< Specifies whether the SDIO Clock divider bypass is
+                                      enabled or disabled.
+                                      This parameter can be a value of @ref SDIO_Clock_Bypass               */
+
+  uint32_t ClockPowerSave;       /*!< Specifies whether SDIO Clock output is enabled or
+                                      disabled when the bus is idle.
+                                      This parameter can be a value of @ref SDIO_Clock_Power_Save           */
+
+  uint32_t BusWide;              /*!< Specifies the SDIO bus width.
+                                      This parameter can be a value of @ref SDIO_Bus_Wide                   */
+
+  uint32_t HardwareFlowControl;  /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+                                      This parameter can be a value of @ref SDIO_Hardware_Flow_Control      */
+
+  uint32_t ClockDiv;             /*!< Specifies the clock frequency of the SDIO controller.
+                                      This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+}SDIO_InitTypeDef;
+
+
+/**
+  * @brief  SDIO Command Control structure
+  */
+typedef struct
+{
+  uint32_t Argument;            /*!< Specifies the SDIO command argument which is sent
+                                     to a card as part of a command message. If a command
+                                     contains an argument, it must be loaded into this register
+                                     before writing the command to the command register.              */
+
+  uint32_t CmdIndex;            /*!< Specifies the SDIO command index. It must be Min_Data = 0 and
+                                     Max_Data = 64                                                    */
+
+  uint32_t Response;            /*!< Specifies the SDIO response type.
+                                     This parameter can be a value of @ref SDIO_Response_Type         */
+
+  uint32_t WaitForInterrupt;    /*!< Specifies whether SDIO wait for interrupt request is
+                                     enabled or disabled.
+                                     This parameter can be a value of @ref SDIO_Wait_Interrupt_State  */
+
+  uint32_t CPSM;                /*!< Specifies whether SDIO Command path state machine (CPSM)
+                                     is enabled or disabled.
+                                     This parameter can be a value of @ref SDIO_CPSM_State            */
+}SDIO_CmdInitTypeDef;
+
+
+/**
+  * @brief  SDIO Data Control structure
+  */
+typedef struct
+{
+  uint32_t DataTimeOut;         /*!< Specifies the data timeout period in card bus clock periods.  */
+
+  uint32_t DataLength;          /*!< Specifies the number of data bytes to be transferred.         */
+
+  uint32_t DataBlockSize;       /*!< Specifies the data block size for block transfer.
+                                     This parameter can be a value of @ref SDIO_Data_Block_Size    */
+
+  uint32_t TransferDir;         /*!< Specifies the data transfer direction, whether the transfer
+                                     is a read or write.
+                                     This parameter can be a value of @ref SDIO_Transfer_Direction */
+
+  uint32_t TransferMode;        /*!< Specifies whether data transfer is in stream or block mode.
+                                     This parameter can be a value of @ref SDIO_Transfer_Type      */
+
+  uint32_t DPSM;                /*!< Specifies whether SDIO Data path state machine (DPSM)
+                                     is enabled or disabled.
+                                     This parameter can be a value of @ref SDIO_DPSM_State         */
+}SDIO_DataInitTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants
+  * @{
+  */
+
+/** @defgroup SDIO_Clock_Edge Clock Edge
+  * @{
+  */
+#define SDIO_CLOCK_EDGE_RISING               ((uint32_t)0x00000000)
+#define SDIO_CLOCK_EDGE_FALLING              SDIO_CLKCR_NEGEDGE
+
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \
+                                  ((EDGE) == SDIO_CLOCK_EDGE_FALLING))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Clock_Bypass Clock Bypass
+  * @{
+  */
+#define SDIO_CLOCK_BYPASS_DISABLE             ((uint32_t)0x00000000)
+#define SDIO_CLOCK_BYPASS_ENABLE              SDIO_CLKCR_BYPASS
+
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \
+                                      ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Clock_Power_Save Clock Power Saving
+  * @{
+  */
+#define SDIO_CLOCK_POWER_SAVE_DISABLE         ((uint32_t)0x00000000)
+#define SDIO_CLOCK_POWER_SAVE_ENABLE          SDIO_CLKCR_PWRSAV
+
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \
+                                        ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Bus_Wide Bus Width
+  * @{
+  */
+#define SDIO_BUS_WIDE_1B                      ((uint32_t)0x00000000)
+#define SDIO_BUS_WIDE_4B                      SDIO_CLKCR_WIDBUS_0
+#define SDIO_BUS_WIDE_8B                      SDIO_CLKCR_WIDBUS_1
+
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \
+                                ((WIDE) == SDIO_BUS_WIDE_4B) || \
+                                ((WIDE) == SDIO_BUS_WIDE_8B))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Hardware_Flow_Control Hardware Flow Control
+  * @{
+  */
+#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE    ((uint32_t)0x00000000)
+#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE     SDIO_CLKCR_HWFC_EN
+
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \
+                                                ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Clock_Division Clock Division
+  * @{
+  */
+#define IS_SDIO_CLKDIV(DIV)   ((DIV) <= 0xFF)
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Command_Index Command Index
+  * @{
+  */
+#define IS_SDIO_CMD_INDEX(INDEX)            ((INDEX) < 0x40)
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Response_Type Response Type
+  * @{
+  */
+#define SDIO_RESPONSE_NO                    ((uint32_t)0x00000000)
+#define SDIO_RESPONSE_SHORT                 SDIO_CMD_WAITRESP_0
+#define SDIO_RESPONSE_LONG                  SDIO_CMD_WAITRESP
+
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO)    || \
+                                    ((RESPONSE) == SDIO_RESPONSE_SHORT) || \
+                                    ((RESPONSE) == SDIO_RESPONSE_LONG))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Wait_Interrupt_State Wait Interrupt
+  * @{
+  */
+#define SDIO_WAIT_NO                        ((uint32_t)0x00000000)
+#define SDIO_WAIT_IT                        SDIO_CMD_WAITINT
+#define SDIO_WAIT_PEND                      SDIO_CMD_WAITPEND
+
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \
+                            ((WAIT) == SDIO_WAIT_IT) || \
+                            ((WAIT) == SDIO_WAIT_PEND))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_CPSM_State CPSM State
+  * @{
+  */
+#define SDIO_CPSM_DISABLE                   ((uint32_t)0x00000000)
+#define SDIO_CPSM_ENABLE                    SDIO_CMD_CPSMEN
+
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \
+                            ((CPSM) == SDIO_CPSM_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Response_Registers Response Register
+  * @{
+  */
+#define SDIO_RESP1                          ((uint32_t)0x00000000)
+#define SDIO_RESP2                          ((uint32_t)0x00000004)
+#define SDIO_RESP3                          ((uint32_t)0x00000008)
+#define SDIO_RESP4                          ((uint32_t)0x0000000C)
+
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \
+                            ((RESP) == SDIO_RESP2) || \
+                            ((RESP) == SDIO_RESP3) || \
+                            ((RESP) == SDIO_RESP4))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Data_Length Data Lenght
+  * @{
+  */
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Data_Block_Size Data Block Size
+  * @{
+  */
+#define SDIO_DATABLOCK_SIZE_1B               ((uint32_t)0x00000000)
+#define SDIO_DATABLOCK_SIZE_2B               SDIO_DCTRL_DBLOCKSIZE_0
+#define SDIO_DATABLOCK_SIZE_4B               SDIO_DCTRL_DBLOCKSIZE_1
+#define SDIO_DATABLOCK_SIZE_8B               ((uint32_t)0x00000030)
+#define SDIO_DATABLOCK_SIZE_16B              SDIO_DCTRL_DBLOCKSIZE_2
+#define SDIO_DATABLOCK_SIZE_32B              ((uint32_t)0x00000050)
+#define SDIO_DATABLOCK_SIZE_64B              ((uint32_t)0x00000060)
+#define SDIO_DATABLOCK_SIZE_128B             ((uint32_t)0x00000070)
+#define SDIO_DATABLOCK_SIZE_256B             SDIO_DCTRL_DBLOCKSIZE_3
+#define SDIO_DATABLOCK_SIZE_512B             ((uint32_t)0x00000090)
+#define SDIO_DATABLOCK_SIZE_1024B            ((uint32_t)0x000000A0)
+#define SDIO_DATABLOCK_SIZE_2048B            ((uint32_t)0x000000B0)
+#define SDIO_DATABLOCK_SIZE_4096B            ((uint32_t)0x000000C0)
+#define SDIO_DATABLOCK_SIZE_8192B            ((uint32_t)0x000000D0)
+#define SDIO_DATABLOCK_SIZE_16384B           ((uint32_t)0x000000E0)
+
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B)    || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_2B)    || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_4B)    || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_8B)    || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_16B)   || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_32B)   || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_64B)   || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_128B)  || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_256B)  || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_512B)  || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_16384B))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Transfer_Direction Transfer Direction
+  * @{
+  */
+#define SDIO_TRANSFER_DIR_TO_CARD            ((uint32_t)0x00000000)
+#define SDIO_TRANSFER_DIR_TO_SDIO            SDIO_DCTRL_DTDIR
+
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \
+                                   ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Transfer_Type Transfer Type
+  * @{
+  */
+#define SDIO_TRANSFER_MODE_BLOCK             ((uint32_t)0x00000000)
+#define SDIO_TRANSFER_MODE_STREAM            SDIO_DCTRL_DTMODE
+
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \
+                                     ((MODE) == SDIO_TRANSFER_MODE_STREAM))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_DPSM_State DPSM State
+  * @{
+  */
+#define SDIO_DPSM_DISABLE                    ((uint32_t)0x00000000)
+#define SDIO_DPSM_ENABLE                     SDIO_DCTRL_DTEN
+
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\
+                            ((DPSM) == SDIO_DPSM_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Read_Wait_Mode Read Wait Mode
+  * @{
+  */
+#define SDIO_READ_WAIT_MODE_DATA2             ((uint32_t)0x00000000)
+#define SDIO_READ_WAIT_MODE_CLK               ((uint32_t)0x00000001)
+
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \
+                                     ((MODE) == SDIO_READ_WAIT_MODE_DATA2))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Interrupt_sources Interrupt Sources
+  * @{
+  */
+#define SDIO_IT_CCRCFAIL                    SDIO_STA_CCRCFAIL
+#define SDIO_IT_DCRCFAIL                    SDIO_STA_DCRCFAIL
+#define SDIO_IT_CTIMEOUT                    SDIO_STA_CTIMEOUT
+#define SDIO_IT_DTIMEOUT                    SDIO_STA_DTIMEOUT
+#define SDIO_IT_TXUNDERR                    SDIO_STA_TXUNDERR
+#define SDIO_IT_RXOVERR                     SDIO_STA_RXOVERR
+#define SDIO_IT_CMDREND                     SDIO_STA_CMDREND
+#define SDIO_IT_CMDSENT                     SDIO_STA_CMDSENT
+#define SDIO_IT_DATAEND                     SDIO_STA_DATAEND
+#define SDIO_IT_STBITERR                    SDIO_STA_STBITERR
+#define SDIO_IT_DBCKEND                     SDIO_STA_DBCKEND
+#define SDIO_IT_CMDACT                      SDIO_STA_CMDACT
+#define SDIO_IT_TXACT                       SDIO_STA_TXACT
+#define SDIO_IT_RXACT                       SDIO_STA_RXACT
+#define SDIO_IT_TXFIFOHE                    SDIO_STA_TXFIFOHE
+#define SDIO_IT_RXFIFOHF                    SDIO_STA_RXFIFOHF
+#define SDIO_IT_TXFIFOF                     SDIO_STA_TXFIFOF
+#define SDIO_IT_RXFIFOF                     SDIO_STA_RXFIFOF
+#define SDIO_IT_TXFIFOE                     SDIO_STA_TXFIFOE
+#define SDIO_IT_RXFIFOE                     SDIO_STA_RXFIFOE
+#define SDIO_IT_TXDAVL                      SDIO_STA_TXDAVL
+#define SDIO_IT_RXDAVL                      SDIO_STA_RXDAVL
+#define SDIO_IT_SDIOIT                      SDIO_STA_SDIOIT
+#define SDIO_IT_CEATAEND                    SDIO_STA_CEATAEND
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Flags Flags
+  * @{
+  */
+#define SDIO_FLAG_CCRCFAIL                  SDIO_STA_CCRCFAIL
+#define SDIO_FLAG_DCRCFAIL                  SDIO_STA_DCRCFAIL
+#define SDIO_FLAG_CTIMEOUT                  SDIO_STA_CTIMEOUT
+#define SDIO_FLAG_DTIMEOUT                  SDIO_STA_DTIMEOUT
+#define SDIO_FLAG_TXUNDERR                  SDIO_STA_TXUNDERR
+#define SDIO_FLAG_RXOVERR                   SDIO_STA_RXOVERR
+#define SDIO_FLAG_CMDREND                   SDIO_STA_CMDREND
+#define SDIO_FLAG_CMDSENT                   SDIO_STA_CMDSENT
+#define SDIO_FLAG_DATAEND                   SDIO_STA_DATAEND
+#define SDIO_FLAG_STBITERR                  SDIO_STA_STBITERR
+#define SDIO_FLAG_DBCKEND                   SDIO_STA_DBCKEND
+#define SDIO_FLAG_CMDACT                    SDIO_STA_CMDACT
+#define SDIO_FLAG_TXACT                     SDIO_STA_TXACT
+#define SDIO_FLAG_RXACT                     SDIO_STA_RXACT
+#define SDIO_FLAG_TXFIFOHE                  SDIO_STA_TXFIFOHE
+#define SDIO_FLAG_RXFIFOHF                  SDIO_STA_RXFIFOHF
+#define SDIO_FLAG_TXFIFOF                   SDIO_STA_TXFIFOF
+#define SDIO_FLAG_RXFIFOF                   SDIO_STA_RXFIFOF
+#define SDIO_FLAG_TXFIFOE                   SDIO_STA_TXFIFOE
+#define SDIO_FLAG_RXFIFOE                   SDIO_STA_RXFIFOE
+#define SDIO_FLAG_TXDAVL                    SDIO_STA_TXDAVL
+#define SDIO_FLAG_RXDAVL                    SDIO_STA_RXDAVL
+#define SDIO_FLAG_SDIOIT                    SDIO_STA_SDIOIT
+#define SDIO_FLAG_CEATAEND                  SDIO_STA_CEATAEND
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros
+  * @{
+  */
+
+/** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region
+  * @{
+  */
+/* ------------ SDIO registers bit address in the alias region -------------- */
+#define SDIO_OFFSET               (SDIO_BASE - PERIPH_BASE)
+
+/* --- CLKCR Register ---*/
+/* Alias word address of CLKEN bit */
+#define CLKCR_OFFSET              (SDIO_OFFSET + 0x04)
+#define CLKEN_BITNUMBER           0x08
+#define CLKCR_CLKEN_BB            (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BITNUMBER * 4))
+
+/* --- CMD Register ---*/
+/* Alias word address of SDIOSUSPEND bit */
+#define CMD_OFFSET                (SDIO_OFFSET + 0x0C)
+#define SDIOSUSPEND_BITNUMBER     0x0B
+#define CMD_SDIOSUSPEND_BB        (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BITNUMBER * 4))
+
+/* Alias word address of ENCMDCOMPL bit */
+#define ENCMDCOMPL_BITNUMBER      0x0C
+#define CMD_ENCMDCOMPL_BB         (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BITNUMBER * 4))
+
+/* Alias word address of NIEN bit */
+#define NIEN_BITNUMBER            0x0D
+#define CMD_NIEN_BB               (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BITNUMBER * 4))
+
+/* Alias word address of ATACMD bit */
+#define ATACMD_BITNUMBER          0x0E
+#define CMD_ATACMD_BB             (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BITNUMBER * 4))
+
+/* --- DCTRL Register ---*/
+/* Alias word address of DMAEN bit */
+#define DCTRL_OFFSET              (SDIO_OFFSET + 0x2C)
+#define DMAEN_BITNUMBER           0x03
+#define DCTRL_DMAEN_BB            (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BITNUMBER * 4))
+
+/* Alias word address of RWSTART bit */
+#define RWSTART_BITNUMBER         0x08
+#define DCTRL_RWSTART_BB          (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BITNUMBER * 4))
+
+/* Alias word address of RWSTOP bit */
+#define RWSTOP_BITNUMBER          0x09
+#define DCTRL_RWSTOP_BB           (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BITNUMBER * 4))
+
+/* Alias word address of RWMOD bit */
+#define RWMOD_BITNUMBER           0x0A
+#define DCTRL_RWMOD_BB            (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BITNUMBER * 4))
+
+/* Alias word address of SDIOEN bit */
+#define SDIOEN_BITNUMBER          0x0B
+#define DCTRL_SDIOEN_BB           (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BITNUMBER * 4))
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions
+  * @brief SDMMC_LL registers bit address in the alias region
+  * @{
+  */
+
+/* ---------------------- SDIO registers bit mask --------------------------- */
+/* --- CLKCR Register ---*/
+/* CLKCR register clear mask */
+#define CLKCR_CLEAR_MASK         ((uint32_t)(SDIO_CLKCR_CLKDIV  | SDIO_CLKCR_PWRSAV |\
+                                             SDIO_CLKCR_BYPASS  | SDIO_CLKCR_WIDBUS |\
+                                             SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN))
+
+/* --- PWRCTRL Register ---*/
+/* --- DCTRL Register ---*/
+/* SDIO DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK         ((uint32_t)(SDIO_DCTRL_DTEN    | SDIO_DCTRL_DTDIR |\
+                                             SDIO_DCTRL_DTMODE  | SDIO_DCTRL_DBLOCKSIZE))
+
+/* --- CMD Register ---*/
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK           ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\
+                                             SDIO_CMD_WAITINT  | SDIO_CMD_WAITPEND |\
+                                             SDIO_CMD_CPSMEN   | SDIO_CMD_SDIOSUSPEND))
+
+/* SDIO RESP Registers Address */
+#define SDIO_RESP_ADDR           ((uint32_t)(SDIO_BASE + 0x14))
+
+/* SDIO Initialization Frequency (400KHz max) */
+#define SDIO_INIT_CLK_DIV ((uint8_t)0x76)
+
+/* SDIO Data Transfer Frequency (25MHz max) */
+#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0)
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration
+  * @brief macros to handle interrupts and specific clock configurations
+  * @{
+  */
+
+/**
+  * @brief  Enable the SDIO device.
+  * @retval None
+  */
+#define __SDIO_ENABLE()   (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE)
+
+/**
+  * @brief  Disable the SDIO device.
+  * @retval None
+  */
+#define __SDIO_DISABLE()   (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE)
+
+/**
+  * @brief  Enable the SDIO DMA transfer.
+  * @retval None
+  */
+#define __SDIO_DMA_ENABLE()   (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE)
+
+/**
+  * @brief  Disable the SDIO DMA transfer.
+  * @retval None
+  */
+#define __SDIO_DMA_DISABLE()   (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE)
+
+/**
+  * @brief  Enable the SDIO device interrupt.
+  * @param  __INSTANCE__ : Pointer to SDIO register base
+  * @param  __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled.
+  *         This parameter can be one or a combination of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+  *                                   bus mode interrupt
+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *            @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @retval None
+  */
+#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->MASK |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the SDIO device interrupt.
+  * @param  __INSTANCE__ : Pointer to SDIO register base
+  * @param  __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+  *                                   bus mode interrupt
+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *            @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @retval None
+  */
+#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->MASK &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified SDIO flag is set or not.
+  * @param  __INSTANCE__ : Pointer to SDIO register base
+  * @param  __FLAG__: specifies the flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+  *            @arg SDIO_FLAG_DTIMEOUT: Data timeout
+  *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
+  *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
+  *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
+  *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *            @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+  *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *            @arg SDIO_FLAG_CMDACT:   Command transfer in progress
+  *            @arg SDIO_FLAG_TXACT:    Data transmit in progress
+  *            @arg SDIO_FLAG_RXACT:    Data receive in progress
+  *            @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+  *            @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+  *            @arg SDIO_FLAG_TXFIFOF:  Transmit FIFO full
+  *            @arg SDIO_FLAG_RXFIFOF:  Receive FIFO full
+  *            @arg SDIO_FLAG_TXFIFOE:  Transmit FIFO empty
+  *            @arg SDIO_FLAG_RXFIFOE:  Receive FIFO empty
+  *            @arg SDIO_FLAG_TXDAVL:   Data available in transmit FIFO
+  *            @arg SDIO_FLAG_RXDAVL:   Data available in receive FIFO
+  *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
+  *            @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval The new state of SDIO_FLAG (SET or RESET).
+  */
+#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__)   (((__INSTANCE__)->STA &(__FLAG__)) != RESET)
+
+
+/**
+  * @brief  Clears the SDIO pending flags.
+  * @param  __INSTANCE__ : Pointer to SDIO register base
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+  *            @arg SDIO_FLAG_DTIMEOUT: Data timeout
+  *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
+  *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
+  *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
+  *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *            @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+  *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
+  *            @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval None
+  */
+#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__)   ((__INSTANCE__)->ICR = (__FLAG__))
+
+/**
+  * @brief  Checks whether the specified SDIO interrupt has occurred or not.
+  * @param  __INSTANCE__ : Pointer to SDIO register base
+  * @param  __INTERRUPT__: specifies the SDIO interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+  *                                   bus mode interrupt
+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *            @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @retval The new state of SDIO_IT (SET or RESET).
+  */
+#define __SDIO_GET_IT  (__INSTANCE__, __INTERRUPT__)   (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @brief  Clears the SDIO's interrupt pending bits.
+  * @param  __INSTANCE__ : Pointer to SDIO register base
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+  *            @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+  *                                   bus mode interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *            @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval None
+  */
+#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__)   ((__INSTANCE__)->ICR = (__INTERRUPT__))
+
+/**
+  * @brief  Enable Start the SD I/O Read Wait operation.
+  * @retval None
+  */
+#define __SDIO_START_READWAIT_ENABLE()   (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE)
+
+/**
+  * @brief  Disable Start the SD I/O Read Wait operations.
+  * @retval None
+  */
+#define __SDIO_START_READWAIT_DISABLE()   (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE)
+
+/**
+  * @brief  Enable Start the SD I/O Read Wait operation.
+  * @retval None
+  */
+#define __SDIO_STOP_READWAIT_ENABLE()   (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE)
+
+/**
+  * @brief  Disable Stop the SD I/O Read Wait operations.
+  * @retval None
+  */
+#define __SDIO_STOP_READWAIT_DISABLE()   (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE)
+
+/**
+  * @brief  Enable the SD I/O Mode Operation.
+  * @retval None
+  */
+#define __SDIO_OPERATION_ENABLE()   (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE)
+
+/**
+  * @brief  Disable the SD I/O Mode Operation.
+  * @retval None
+  */
+#define __SDIO_OPERATION_DISABLE()   (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE)
+
+/**
+  * @brief  Enable the SD I/O Suspend command sending.
+  * @retval None
+  */
+#define __SDIO_SUSPEND_CMD_ENABLE()   (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE)
+
+/**
+  * @brief  Disable the SD I/O Suspend command sending.
+  * @retval None
+  */
+#define __SDIO_SUSPEND_CMD_DISABLE()   (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE)
+
+#if !defined(STM32F446xx)
+/**
+  * @brief  Enable the command completion signal.
+  * @retval None
+  */
+#define __SDIO_CEATA_CMD_COMPLETION_ENABLE()   (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE)
+
+/**
+  * @brief  Disable the command completion signal.
+  * @retval None
+  */
+#define __SDIO_CEATA_CMD_COMPLETION_DISABLE()   (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE)
+
+/**
+  * @brief  Enable the CE-ATA interrupt.
+  * @retval None
+  */
+#define __SDIO_CEATA_ENABLE_IT()   (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0)
+
+/**
+  * @brief  Disable the CE-ATA interrupt.
+  * @retval None
+  */
+#define __SDIO_CEATA_DISABLE_IT()   (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1)
+
+/**
+  * @brief  Enable send CE-ATA command (CMD61).
+  * @retval None
+  */
+#define __SDIO_CEATA_SENDCMD_ENABLE()   (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE)
+
+/**
+  * @brief  Disable send CE-ATA command (CMD61).
+  * @retval None
+  */
+#define __SDIO_CEATA_SENDCMD_DISABLE()   (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE)
+#endif /* !defined(STM32F446xx)  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDMMC_LL_Exported_Functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  **********************************/
+/** @addtogroup HAL_SDMMC_LL_Group1
+  * @{
+  */
+HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init);
+/**
+  * @}
+  */
+
+/* I/O operation functions  *****************************************************/
+/** @addtogroup HAL_SDMMC_LL_Group2
+  * @{
+  */
+/* Blocking mode: Polling */
+uint32_t          SDIO_ReadFIFO(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  ************************************************/
+/** @addtogroup HAL_SDMMC_LL_Group3
+  * @{
+  */
+HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx);
+uint32_t          SDIO_GetPowerState(SDIO_TypeDef *SDIOx);
+
+/* Command path state machine (CPSM) management functions */
+HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+uint8_t           SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx);
+uint32_t          SDIO_GetResponse(uint32_t SDIO_RESP);
+
+/* Data path state machine (DPSM) management functions */
+HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t          SDIO_GetDataCounter(SDIO_TypeDef *SDIOx);
+uint32_t          SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx);
+
+/* SDIO IO Cards mode management functions */
+HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_SDMMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h
new file mode 100644
index 0000000..234367c
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h
@@ -0,0 +1,463 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_ll_usb.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of USB Core HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_USB_H
+#define __STM32F4xx_LL_USB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL
+  * @{
+  */
+
+/** @addtogroup USB_Core
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+  * @brief  USB Mode definition
+  */
+typedef enum
+{
+   USB_OTG_DEVICE_MODE  = 0,
+   USB_OTG_HOST_MODE    = 1,
+   USB_OTG_DRD_MODE     = 2
+
+}USB_OTG_ModeTypeDef;
+
+/**
+  * @brief  URB States definition
+  */
+typedef enum {
+  URB_IDLE = 0,
+  URB_DONE,
+  URB_NOTREADY,
+  URB_NYET,
+  URB_ERROR,
+  URB_STALL
+
+}USB_OTG_URBStateTypeDef;
+
+/**
+  * @brief  Host channel States  definition
+  */
+typedef enum {
+  HC_IDLE = 0,
+  HC_XFRC,
+  HC_HALTED,
+  HC_NAK,
+  HC_NYET,
+  HC_STALL,
+  HC_XACTERR,
+  HC_BBLERR,
+  HC_DATATGLERR
+
+}USB_OTG_HCStateTypeDef;
+
+/**
+  * @brief  PCD Initialization Structure definition
+  */
+typedef struct
+{
+  uint32_t dev_endpoints;        /*!< Device Endpoints number.
+                                      This parameter depends on the used USB core.
+                                      This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+  uint32_t Host_channels;        /*!< Host Channels number.
+                                      This parameter Depends on the used USB core.
+                                      This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+  uint32_t speed;                /*!< USB Core speed.
+                                      This parameter can be any value of @ref USB_Core_Speed_                */
+
+  uint32_t dma_enable;           /*!< Enable or disable of the USB embedded DMA.                             */
+
+  uint32_t ep0_mps;              /*!< Set the Endpoint 0 Max Packet size.
+                                      This parameter can be any value of @ref USB_EP0_MPS_                   */
+
+  uint32_t phy_itface;           /*!< Select the used PHY interface.
+                                      This parameter can be any value of @ref USB_Core_PHY_                  */
+
+  uint32_t Sof_enable;           /*!< Enable or disable the output of the SOF signal.                        */
+
+  uint32_t low_power_enable;     /*!< Enable or disable the low power mode.                                  */
+
+  uint32_t lpm_enable;           /*!< Enable or disable Link Power Management.                               */
+
+  uint32_t vbus_sensing_enable;  /*!< Enable or disable the VBUS Sensing feature.                            */
+
+  uint32_t use_dedicated_ep1;    /*!< Enable or disable the use of the dedicated EP1 interrupt.              */
+
+  uint32_t use_external_vbus;    /*!< Enable or disable the use of the external VBUS.                        */
+
+}USB_OTG_CfgTypeDef;
+
+typedef struct
+{
+  uint8_t   num;            /*!< Endpoint number
+                                This parameter must be a number between Min_Data = 1 and Max_Data = 15    */
+
+  uint8_t   is_in;          /*!< Endpoint direction
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
+
+  uint8_t   is_stall;       /*!< Endpoint stall condition
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
+
+  uint8_t   type;           /*!< Endpoint type
+                                 This parameter can be any value of @ref USB_EP_Type_                     */
+
+  uint8_t   data_pid_start; /*!< Initial data PID
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
+
+  uint8_t   even_odd_frame; /*!< IFrame parity
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+
+  uint16_t  tx_fifo_num;    /*!< Transmission FIFO number
+                                 This parameter must be a number between Min_Data = 1 and Max_Data = 15   */
+
+  uint32_t  maxpacket;      /*!< Endpoint Max packet size
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+  uint8_t   *xfer_buff;     /*!< Pointer to transfer buffer                                               */
+
+  uint32_t  dma_addr;       /*!< 32 bits aligned transfer buffer address                                  */
+
+  uint32_t  xfer_len;       /*!< Current transfer length                                                  */
+
+  uint32_t  xfer_count;     /*!< Partial transfer length in case of multi packet transfer                 */
+
+}USB_OTG_EPTypeDef;
+
+typedef struct
+{
+  uint8_t   dev_addr ;     /*!< USB device address.
+                                This parameter must be a number between Min_Data = 1 and Max_Data = 255    */
+
+  uint8_t   ch_num;        /*!< Host channel number.
+                                This parameter must be a number between Min_Data = 1 and Max_Data = 15     */
+
+  uint8_t   ep_num;        /*!< Endpoint number.
+                                This parameter must be a number between Min_Data = 1 and Max_Data = 15     */
+
+  uint8_t   ep_is_in;      /*!< Endpoint direction
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+
+  uint8_t   speed;         /*!< USB Host speed.
+                                This parameter can be any value of @ref USB_Core_Speed_                    */
+
+  uint8_t   do_ping;       /*!< Enable or disable the use of the PING protocol for HS mode.                */
+
+  uint8_t   process_ping;  /*!< Execute the PING protocol for HS mode.                                     */
+
+  uint8_t   ep_type;       /*!< Endpoint Type.
+                                This parameter can be any value of @ref USB_EP_Type_                       */
+
+  uint16_t  max_packet;    /*!< Endpoint Max packet size.
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 64KB   */
+
+  uint8_t   data_pid;      /*!< Initial data PID.
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+
+  uint8_t   *xfer_buff;    /*!< Pointer to transfer buffer.                                                */
+
+  uint32_t  xfer_len;      /*!< Current transfer length.                                                   */
+
+  uint32_t  xfer_count;    /*!< Partial transfer length in case of multi packet transfer.                  */
+
+  uint8_t   toggle_in;     /*!< IN transfer current toggle flag.
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+
+  uint8_t   toggle_out;    /*!< OUT transfer current toggle flag
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+
+  uint32_t  dma_addr;      /*!< 32 bits aligned transfer buffer address.                                   */
+
+  uint32_t  ErrCnt;        /*!< Host channel error count.*/
+
+  USB_OTG_URBStateTypeDef  urb_state;  /*!< URB state.
+                                           This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
+
+  USB_OTG_HCStateTypeDef   state;     /*!< Host Channel state.
+                                           This parameter can be any value of @ref USB_OTG_HCStateTypeDef  */
+
+}USB_OTG_HCTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+  * @{
+  */
+
+/** @defgroup USB_Core_Mode_ USB Core Mode
+  * @{
+  */
+#define USB_OTG_MODE_DEVICE                    0
+#define USB_OTG_MODE_HOST                      1
+#define USB_OTG_MODE_DRD                       2
+/**
+  * @}
+  */
+
+/** @defgroup USB_Core_Speed_   USB Core Speed
+  * @{
+  */
+#define USB_OTG_SPEED_HIGH                     0
+#define USB_OTG_SPEED_HIGH_IN_FULL             1
+#define USB_OTG_SPEED_LOW                      2
+#define USB_OTG_SPEED_FULL                     3
+/**
+  * @}
+  */
+
+/** @defgroup USB_Core_PHY_   USB Core PHY
+  * @{
+  */
+#define USB_OTG_ULPI_PHY                       1
+#define USB_OTG_EMBEDDED_PHY                   2
+/**
+  * @}
+  */
+
+/** @defgroup USB_Core_MPS_   USB Core MPS
+  * @{
+  */
+#define USB_OTG_HS_MAX_PACKET_SIZE           512
+#define USB_OTG_FS_MAX_PACKET_SIZE           64
+#define USB_OTG_MAX_EP0_SIZE                 64
+/**
+  * @}
+  */
+
+/** @defgroup USB_Core_Phy_Frequency_   USB Core Phy Frequency
+  * @{
+  */
+#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ     (0 << 1)
+#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ     (1 << 1)
+#define DSTS_ENUMSPD_LS_PHY_6MHZ               (2 << 1)
+#define DSTS_ENUMSPD_FS_PHY_48MHZ              (3 << 1)
+/**
+  * @}
+  */
+
+/** @defgroup USB_CORE_Frame_Interval_   USB CORE Frame Interval
+  * @{
+  */
+#define DCFG_FRAME_INTERVAL_80                 0
+#define DCFG_FRAME_INTERVAL_85                 1
+#define DCFG_FRAME_INTERVAL_90                 2
+#define DCFG_FRAME_INTERVAL_95                 3
+/**
+  * @}
+  */
+
+/** @defgroup USB_EP0_MPS_  USB EP0 MPS
+  * @{
+  */
+#define DEP0CTL_MPS_64                         0
+#define DEP0CTL_MPS_32                         1
+#define DEP0CTL_MPS_16                         2
+#define DEP0CTL_MPS_8                          3
+/**
+  * @}
+  */
+
+/** @defgroup USB_EP_Speed_  USB EP Speed
+  * @{
+  */
+#define EP_SPEED_LOW                           0
+#define EP_SPEED_FULL                          1
+#define EP_SPEED_HIGH                          2
+/**
+  * @}
+  */
+
+/** @defgroup USB_EP_Type_  USB EP Type
+  * @{
+  */
+#define EP_TYPE_CTRL                           0
+#define EP_TYPE_ISOC                           1
+#define EP_TYPE_BULK                           2
+#define EP_TYPE_INTR                           3
+#define EP_TYPE_MSK                            3
+/**
+  * @}
+  */
+
+/** @defgroup USB_STS_Defines_   USB STS Defines
+  * @{
+  */
+#define STS_GOUT_NAK                           1
+#define STS_DATA_UPDT                          2
+#define STS_XFER_COMP                          3
+#define STS_SETUP_COMP                         4
+#define STS_SETUP_UPDT                         6
+/**
+  * @}
+  */
+
+/** @defgroup HCFG_SPEED_Defines_   HCFG SPEED Defines
+  * @{
+  */
+#define HCFG_30_60_MHZ                         0
+#define HCFG_48_MHZ                            1
+#define HCFG_6_MHZ                             2
+/**
+  * @}
+  */
+
+/** @defgroup HPRT0_PRTSPD_SPEED_Defines_  HPRT0 PRTSPD SPEED Defines
+  * @{
+  */
+#define HPRT0_PRTSPD_HIGH_SPEED                0
+#define HPRT0_PRTSPD_FULL_SPEED                1
+#define HPRT0_PRTSPD_LOW_SPEED                 2
+/**
+  * @}
+  */
+
+#define HCCHAR_CTRL                            0
+#define HCCHAR_ISOC                            1
+#define HCCHAR_BULK                            2
+#define HCCHAR_INTR                            3
+
+#define HC_PID_DATA0                           0
+#define HC_PID_DATA2                           1
+#define HC_PID_DATA1                           2
+#define HC_PID_SETUP                           3
+
+#define GRXSTS_PKTSTS_IN                       2
+#define GRXSTS_PKTSTS_IN_XFER_COMP             3
+#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR          5
+#define GRXSTS_PKTSTS_CH_HALTED                7
+
+#define USBx_PCGCCTL    *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
+#define USBx_HPRT0      *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
+
+#define USBx_DEVICE     ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE))
+#define USBx_INEP(i)    ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_OUTEP(i)   ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_DFIFO(i)   *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
+
+#define USBx_HOST       ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
+#define USBx_HC(i)      ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
+/**
+  * @}
+  */
+/* Exported macro ------------------------------------------------------------*/
+#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)     ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
+#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)   ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
+
+#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__)          (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
+#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__)         (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode);
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
+HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
+void *            USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
+HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
+uint8_t           USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+uint32_t          USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+void              USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
+
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
+uint32_t          USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+                                  uint8_t ch_num,
+                                  uint8_t epnum,
+                                  uint8_t dev_address,
+                                  uint8_t speed,
+                                  uint8_t ep_type,
+                                  uint16_t mps);
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
+uint32_t          USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_LL_USB_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c
new file mode 100644
index 0000000..2649228
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c
@@ -0,0 +1,531 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   HAL module driver.
+  *          This is the common part of the HAL initialization
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The common HAL driver contains a set of generic and common APIs that can be
+    used by the PPP peripheral drivers and the user to start using the HAL.
+    [..]
+    The HAL contains two APIs' categories:
+         (+) Common HAL APIs
+         (+) Services HAL APIs
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HAL HAL
+  * @brief HAL module driver.
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup HAL_Private_Constants
+  * @{
+  */
+/**
+  * @brief STM32F4xx HAL Driver version number V1.3.2
+  */
+#define __STM32F4xx_HAL_VERSION_MAIN   (0x01) /*!< [31:24] main version */
+#define __STM32F4xx_HAL_VERSION_SUB1   (0x03) /*!< [23:16] sub1 version */
+#define __STM32F4xx_HAL_VERSION_SUB2   (0x02) /*!< [15:8]  sub2 version */
+#define __STM32F4xx_HAL_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
+#define __STM32F4xx_HAL_VERSION         ((__STM32F4xx_HAL_VERSION_MAIN << 24)\
+                                        |(__STM32F4xx_HAL_VERSION_SUB1 << 16)\
+                                        |(__STM32F4xx_HAL_VERSION_SUB2 << 8 )\
+                                        |(__STM32F4xx_HAL_VERSION_RC))
+
+#define IDCODE_DEVID_MASK    ((uint32_t)0x00000FFF)
+
+/* ------------ RCC registers bit address in the alias region ----------- */
+#define SYSCFG_OFFSET             (SYSCFG_BASE - PERIPH_BASE)
+/* ---  MEMRMP Register ---*/
+/* Alias word address of UFB_MODE bit */
+#define MEMRMP_OFFSET             SYSCFG_OFFSET
+#define UFB_MODE_BIT_NUMBER       POSITION_VAL(SYSCFG_MEMRMP_UFB_MODE)
+#define UFB_MODE_BB               (uint32_t)(PERIPH_BB_BASE + (MEMRMP_OFFSET * 32) + (UFB_MODE_BIT_NUMBER * 4))
+
+/* ---  CMPCR Register ---*/
+/* Alias word address of CMP_PD bit */
+#define CMPCR_OFFSET              (SYSCFG_OFFSET + 0x20)
+#define CMP_PD_BIT_NUMBER         POSITION_VAL(SYSCFG_CMPCR_CMP_PD)
+#define CMPCR_CMP_PD_BB           (uint32_t)(PERIPH_BB_BASE + (CMPCR_OFFSET * 32) + (CMP_PD_BIT_NUMBER * 4))
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup HAL_Private_Variables
+  * @{
+  */
+static __IO uint32_t uwTick;
+/**
+  * @}
+  */
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+  * @{
+  */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ *  @brief    Initialization and de-initialization functions
+ *
+ at verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initializes the Flash interface the NVIC allocation and initial clock
+          configuration. It initializes the systick also when timeout is needed
+          and the backup domain when enabled.
+      (+) de-Initializes common part of the HAL
+      (+) Configure The time base source to have 1ms time base with a dedicated
+          Tick interrupt priority.
+        (++) Systick timer is used by default as source of time base, but user
+             can eventually implement his proper time base source (a general purpose
+             timer for example or other time source), keeping in mind that Time base
+             duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
+             handled in milliseconds basis.
+        (++) Time base configuration function (HAL_InitTick ()) is called automatically
+             at the beginning of the program after reset by HAL_Init() or at any time
+             when clock is configured, by HAL_RCC_ClockConfig().
+        (++) Source of time base is configured  to generate interrupts at regular
+             time intervals. Care must be taken if HAL_Delay() is called from a
+             peripheral ISR process, the Tick interrupt line must have higher priority
+            (numerically lower) than the peripheral interrupt. Otherwise the caller
+            ISR process will be blocked.
+       (++) functions affecting time base configurations are declared as __weak
+             to make  override possible  in case of other  implementations in user file.
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function is used to initialize the HAL Library; it must be the first
+  *         instruction to be executed in the main program (before to call any other
+  *         HAL function), it performs the following:
+  *           Configure the Flash prefetch, instruction and Data caches.
+  *           Configures the SysTick to generate an interrupt each 1 millisecond,
+  *           which is clocked by the HSI (at this stage, the clock is not yet
+  *           configured and thus the system is running from the internal HSI at 16 MHz).
+  *           Set NVIC Group Priority to 4.
+  *           Calls the HAL_MspInit() callback function defined in user file
+  *           "stm32f4xx_hal_msp.c" to do the global low level hardware initialization
+  *
+  * @note   SysTick is used as time base for the HAL_Delay() function, the application
+  *         need to ensure that the SysTick time base is always set to 1 millisecond
+  *         to have correct HAL operation.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_Init(void)
+{
+  /* Configure Flash prefetch, Instruction cache, Data cache */
+#if (INSTRUCTION_CACHE_ENABLE != 0)
+   __HAL_FLASH_INSTRUCTION_CACHE_ENABLE();
+#endif /* INSTRUCTION_CACHE_ENABLE */
+
+#if (DATA_CACHE_ENABLE != 0)
+   __HAL_FLASH_DATA_CACHE_ENABLE();
+#endif /* DATA_CACHE_ENABLE */
+
+#if (PREFETCH_ENABLE != 0)
+  __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif /* PREFETCH_ENABLE */
+
+  /* Set Interrupt Group Priority */
+  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+  /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
+  HAL_InitTick(TICK_INT_PRIORITY);
+
+  /* Init the low level hardware */
+  HAL_MspInit();
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function de-Initializes common part of the HAL and stops the systick.
+  *         This function is optional.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+  /* Reset of all peripherals */
+  __HAL_RCC_APB1_FORCE_RESET();
+  __HAL_RCC_APB1_RELEASE_RESET();
+
+  __HAL_RCC_APB2_FORCE_RESET();
+  __HAL_RCC_APB2_RELEASE_RESET();
+
+  __HAL_RCC_AHB1_FORCE_RESET();
+  __HAL_RCC_AHB1_RELEASE_RESET();
+
+  __HAL_RCC_AHB2_FORCE_RESET();
+  __HAL_RCC_AHB2_RELEASE_RESET();
+
+  __HAL_RCC_AHB3_FORCE_RESET();
+  __HAL_RCC_AHB3_RELEASE_RESET();
+
+  /* De-Init the low level hardware */
+  HAL_MspDeInit();
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the MSP.
+  * @retval None
+  */
+__weak void HAL_MspInit(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the MSP.
+  * @retval None
+  */
+__weak void HAL_MspDeInit(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief This function configures the source of the time base.
+  *        The time source is configured  to have 1ms time base with a dedicated
+  *        Tick interrupt priority.
+  * @note This function is called  automatically at the beginning of program after
+  *       reset by HAL_Init() or at any time when clock is reconfigured  by HAL_RCC_ClockConfig().
+  * @note In the default implementation, SysTick timer is the source of time base.
+  *       It is used to generate interrupts at regular time intervals.
+  *       Care must be taken if HAL_Delay() is called from a peripheral ISR process,
+  *       The the SysTick interrupt must have higher priority (numerically lower)
+  *       than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+  *       The function is declared as __weak  to be overwritten  in case of other
+  *       implementation  in user file.
+  * @param TickPriority: Tick interrupt priority.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+  /*Configure the SysTick to have interrupt in 1ms time basis*/
+  HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
+
+  /*Configure the SysTick IRQ priority */
+  HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
+ *  @brief    HAL Control functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### HAL Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Provide a tick value in millisecond
+      (+) Provide a blocking delay in millisecond
+      (+) Suspend the time base source interrupt
+      (+) Resume the time base source interrupt
+      (+) Get the HAL API driver version
+      (+) Get the device identifier
+      (+) Get the device revision identifier
+      (+) Enable/Disable Debug module during SLEEP mode
+      (+) Enable/Disable Debug module during STOP mode
+      (+) Enable/Disable Debug module during STANDBY mode
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief This function is called to increment  a global variable "uwTick"
+  *        used as application time base.
+  * @note In the default implementation, this variable is incremented each 1ms
+  *       in Systick ISR.
+ * @note This function is declared as __weak to be overwritten in case of other
+  *      implementations in user file.
+  * @retval None
+  */
+__weak void HAL_IncTick(void)
+{
+  uwTick++;
+}
+
+/**
+  * @brief Provides a tick value in millisecond.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval tick value
+  */
+__weak uint32_t HAL_GetTick(void)
+{
+  return uwTick;
+}
+
+/**
+  * @brief This function provides accurate delay (in milliseconds) based
+  *        on variable incremented.
+  * @note In the default implementation , SysTick timer is the source of time base.
+  *       It is used to generate interrupts at regular time intervals where uwTick
+  *       is incremented.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @param Delay: specifies the delay time length, in milliseconds.
+  * @retval None
+  */
+__weak void HAL_Delay(__IO uint32_t Delay)
+{
+  uint32_t tickstart = 0;
+  tickstart = HAL_GetTick();
+  while((HAL_GetTick() - tickstart) < Delay)
+  {
+  }
+}
+
+/**
+  * @brief Suspend Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+  *       is called, the SysTick interrupt will be disabled and so Tick increment
+  *       is suspended.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_SuspendTick(void)
+{
+  /* Disable SysTick Interrupt */
+  SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+  * @brief Resume Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+  *       is called, the SysTick interrupt will be enabled and so Tick increment
+  *       is resumed.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_ResumeTick(void)
+{
+  /* Enable SysTick Interrupt */
+  SysTick->CTRL  |= SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+  * @brief  Returns the HAL revision
+  * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+  */
+uint32_t HAL_GetHalVersion(void)
+{
+ return __STM32F4xx_HAL_VERSION;
+}
+
+/**
+  * @brief  Returns the device revision identifier.
+  * @retval Device revision identifier
+  */
+uint32_t HAL_GetREVID(void)
+{
+   return((DBGMCU->IDCODE) >> 16);
+}
+
+/**
+  * @brief  Returns the device identifier.
+  * @retval Device identifier
+  */
+uint32_t HAL_GetDEVID(void)
+{
+   return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
+
+/**
+  * @brief  Enable the Debug Module during SLEEP mode
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGSleepMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Disable the Debug Module during SLEEP mode
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGSleepMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STOP mode
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStopMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Disable the Debug Module during STOP mode
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStopMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STANDBY mode
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @brief  Disable the Debug Module during STANDBY mode
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @brief  Enables the I/O Compensation Cell.
+  * @note   The I/O compensation cell can be used only when the device supply
+  *         voltage ranges from 2.4 to 3.6 V.
+  * @retval None
+  */
+void HAL_EnableCompensationCell(void)
+{
+  *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief  Power-down the I/O Compensation Cell.
+  * @note   The I/O compensation cell can be used only when the device supply
+  *         voltage ranges from 2.4 to 3.6 V.
+  * @retval None
+  */
+void HAL_DisableCompensationCell(void)
+{
+  *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)DISABLE;
+}
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/**
+  * @brief  Enables the Internal FLASH Bank Swapping.
+  *
+  * @note   This function can be used only for STM32F42xxx/43xxx devices.
+  *
+  * @note   Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
+  *         and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000)
+  *
+  * @retval None
+  */
+void HAL_EnableMemorySwappingBank(void)
+{
+  *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief  Disables the Internal FLASH Bank Swapping.
+  *
+  * @note   This function can be used only for STM32F42xxx/43xxx devices.
+  *
+  * @note   The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x0000 0000)
+  *         and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000)
+  *
+  * @retval None
+  */
+void HAL_DisableMemorySwappingBank(void)
+{
+
+  *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)DISABLE;
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c
new file mode 100644
index 0000000..00900e7
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c
@@ -0,0 +1,1412 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_adc.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   This file provides firmware functions to manage the following
+  *          functionalities of the Analog to Digital Convertor (ADC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + State and errors functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### ADC Peripheral features #####
+  ==============================================================================
+  [..]
+  (#) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution.
+  (#) Interrupt generation at the end of conversion, end of injected conversion,
+      and in case of analog watchdog or overrun events
+  (#) Single and continuous conversion modes.
+  (#) Scan mode for automatic conversion of channel 0 to channel x.
+  (#) Data alignment with in-built data coherency.
+  (#) Channel-wise programmable sampling time.
+  (#) External trigger option with configurable polarity for both regular and
+      injected conversion.
+  (#) Dual/Triple mode (on devices with 2 ADCs or more).
+  (#) Configurable DMA data storage in Dual/Triple ADC mode.
+  (#) Configurable delay between conversions in Dual/Triple interleaved mode.
+  (#) ADC conversion type (refer to the datasheets).
+  (#) ADC supply requirements: 2.4 V to 3.6 V at full speed and down to 1.8 V at
+      slower speed.
+  (#) ADC input range: VREF(minus) = VIN = VREF(plus).
+  (#) DMA request generation during regular channel conversion.
+
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+  (#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit():
+       (##) Enable the ADC interface clock using __HAL_RCC_ADC_CLK_ENABLE()
+       (##) ADC pins configuration
+             (+++) Enable the clock for the ADC GPIOs using the following function:
+                   __HAL_RCC_GPIOx_CLK_ENABLE()
+             (+++) Configure these ADC pins in analog mode using HAL_GPIO_Init()
+       (##) In case of using interrupts (e.g. HAL_ADC_Start_IT())
+             (+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority()
+             (+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ()
+             (+++) In ADC IRQ handler, call HAL_ADC_IRQHandler()
+       (##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA())
+             (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE()
+             (+++) Configure and enable two DMA streams stream for managing data
+                 transfer from peripheral to memory (output stream)
+             (+++) Associate the initialized DMA handle to the CRYP DMA handle
+                 using  __HAL_LINKDMA()
+             (+++) Configure the priority and enable the NVIC for the transfer complete
+                 interrupt on the two DMA Streams. The output stream should have higher
+                 priority than the input stream.
+
+    *** Configuration of ADC, groups regular/injected, channels parameters ***
+  ==============================================================================
+  [..]
+  (#) Configure the ADC parameters (resolution, data alignment, ...)
+      and regular group parameters (conversion trigger, sequencer, ...)
+      using function HAL_ADC_Init().
+
+  (#) Configure the channels for regular group parameters (channel number,
+      channel rank into sequencer, ..., into regular group)
+      using function HAL_ADC_ConfigChannel().
+
+  (#) Optionally, configure the injected group parameters (conversion trigger,
+      sequencer, ..., of injected group)
+      and the channels for injected group parameters (channel number,
+      channel rank into sequencer, ..., into injected group)
+      using function HAL_ADCEx_InjectedConfigChannel().
+
+  (#) Optionally, configure the analog watchdog parameters (channels
+      monitored, thresholds, ...) using function HAL_ADC_AnalogWDGConfig().
+
+  (#) Optionally, for devices with several ADC instances: configure the
+      multimode parameters using function HAL_ADCEx_MultiModeConfigChannel().
+
+                       *** Execution of ADC conversions ***
+  ==============================================================================
+  [..]
+  (#) ADC driver can be used among three modes: polling, interruption,
+      transfer by DMA.
+
+     *** Polling mode IO operation ***
+     =================================
+     [..]
+       (+) Start the ADC peripheral using HAL_ADC_Start()
+       (+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage
+           user can specify the value of timeout according to his end application
+       (+) To read the ADC converted values, use the HAL_ADC_GetValue() function.
+       (+) Stop the ADC peripheral using HAL_ADC_Stop()
+
+     *** Interrupt mode IO operation ***
+     ===================================
+     [..]
+       (+) Start the ADC peripheral using HAL_ADC_Start_IT()
+       (+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine
+       (+) At ADC end of conversion HAL_ADC_ConvCpltCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_ADC_ConvCpltCallback
+       (+) In case of ADC Error, HAL_ADC_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_ADC_ErrorCallback
+       (+) Stop the ADC peripheral using HAL_ADC_Stop_IT()
+
+     *** DMA mode IO operation ***
+     ==============================
+     [..]
+       (+) Start the ADC peripheral using HAL_ADC_Start_DMA(), at this stage the user specify the length
+           of data to be transferred at each end of conversion
+       (+) At The end of data transfer by HAL_ADC_ConvCpltCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_ADC_ConvCpltCallback
+       (+) In case of transfer Error, HAL_ADC_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_ADC_ErrorCallback
+       (+) Stop the ADC peripheral using HAL_ADC_Stop_DMA()
+
+     *** ADC HAL driver macros list ***
+     =============================================
+     [..]
+       Below the list of most used macros in ADC HAL driver.
+
+      (+) __HAL_ADC_ENABLE : Enable the ADC peripheral
+      (+) __HAL_ADC_DISABLE : Disable the ADC peripheral
+      (+) __HAL_ADC_ENABLE_IT: Enable the ADC end of conversion interrupt
+      (+) __HAL_ADC_DISABLE_IT: Disable the ADC end of conversion interrupt
+      (+) __HAL_ADC_GET_IT_SOURCE: Check if the specified ADC interrupt source is enabled or disabled
+      (+) __HAL_ADC_CLEAR_FLAG: Clear the ADC's pending flags
+      (+) __HAL_ADC_GET_FLAG: Get the selected ADC's flag status
+      (+) ADC_GET_RESOLUTION: Return resolution bits in CR1 register
+
+     [..]
+       (@) You can refer to the ADC HAL driver header file for more useful macros
+
+                      *** Deinitialization of ADC ***
+  ==============================================================================
+  [..]
+  (#) Disable the ADC interface
+     (++) ADC clock can be hard reset and disabled at RCC top level.
+     (++) Hard reset of ADC peripherals
+          using macro __HAL_RCC_ADC_FORCE_RESET(), __HAL_RCC_ADC_RELEASE_RESET().
+     (++) ADC clock disable using the equivalent macro/functions as configuration step.
+               (+++) Example:
+                   Into HAL_ADC_MspDeInit() (recommended code location) or with
+                   other device clock parameters configuration:
+               (+++) HAL_RCC_GetOscConfig(&RCC_OscInitStructure);
+               (+++) RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+               (+++) RCC_OscInitStructure.HSIState = RCC_HSI_OFF; (if not used for system clock)
+               (+++) HAL_RCC_OscConfig(&RCC_OscInitStructure);
+
+  (#) ADC pins configuration
+     (++) Disable the clock for the ADC GPIOs using macro __HAL_RCC_GPIOx_CLK_DISABLE()
+
+  (#) Optionally, in case of usage of ADC with interruptions:
+     (++) Disable the NVIC for ADC using function HAL_NVIC_DisableIRQ(ADCx_IRQn)
+
+  (#) Optionally, in case of usage of DMA:
+        (++) Deinitialize the DMA using function HAL_DMA_DeInit().
+        (++) Disable the NVIC for DMA using function HAL_NVIC_DisableIRQ(DMAx_Channelx_IRQn)
+
+    @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup ADC ADC
+  * @brief ADC driver modules
+  * @{
+  */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup ADC_Private_Functions
+  * @{
+  */
+/* Private function prototypes -----------------------------------------------*/
+static void ADC_Init(ADC_HandleTypeDef* hadc);
+static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma);
+static void ADC_DMAError(DMA_HandleTypeDef *hdma);
+static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup ADC_Exported_Functions ADC Exported Functions
+  * @{
+  */
+
+/** @defgroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the ADC.
+      (+) De-initialize the ADC.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the ADCx peripheral according to the specified parameters
+  *         in the ADC_InitStruct and initializes the ADC MSP.
+  *
+  * @note   This function is used to configure the global features of the ADC (
+  *         ClockPrescaler, Resolution, Data Alignment and number of conversion), however,
+  *         the rest of the configuration parameters are specific to the regular
+  *         channels group (scan mode activation, continuous mode activation,
+  *         External trigger source and edge, DMA continuous request after the
+  *         last transfer and End of conversion selection).
+  *
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc)
+{
+  /* Check ADC handle */
+  if(hadc == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+  assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler));
+  assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution));
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ScanConvMode));
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+  assert_param(IS_ADC_EXT_TRIG(hadc->Init.ExternalTrigConv));
+  assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign));
+  assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion));
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests));
+  assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection));
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode));
+
+  if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START)
+  {
+    assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+  }
+
+  if(hadc->State == HAL_ADC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hadc->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_ADC_MspInit(hadc);
+  }
+
+  /* Initialize the ADC state */
+  hadc->State = HAL_ADC_STATE_BUSY;
+
+  /* Set ADC parameters */
+  ADC_Init(hadc);
+
+  /* Set ADC error code to none */
+  hadc->ErrorCode = HAL_ADC_ERROR_NONE;
+
+  /* Initialize the ADC state */
+  hadc->State = HAL_ADC_STATE_READY;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hadc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deinitializes the ADCx peripheral registers to their default reset values.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc)
+{
+  /* Check ADC handle */
+  if(hadc == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+  /* Change ADC state */
+  hadc->State = HAL_ADC_STATE_BUSY;
+
+  /* DeInit the low level hardware */
+  HAL_ADC_MspDeInit(hadc);
+
+  /* Set ADC error code to none */
+  hadc->ErrorCode = HAL_ADC_ERROR_NONE;
+
+  /* Change ADC state */
+  hadc->State = HAL_ADC_STATE_RESET;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the ADC MSP.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+__weak void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the ADC MSP.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Exported_Functions_Group2 IO operation functions
+ *  @brief    IO operation functions
+ *
+ at verbatim
+ ===============================================================================
+             ##### IO operation functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Start conversion of regular channel.
+      (+) Stop conversion of regular channel.
+      (+) Start conversion of regular channel and enable interrupt.
+      (+) Stop conversion of regular channel and disable interrupt.
+      (+) Start conversion of regular channel and enable DMA transfer.
+      (+) Stop conversion of regular channel and disable DMA transfer.
+      (+) Handle ADC interrupt request.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables ADC and starts conversion of the regular channels.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc)
+{
+  __IO uint32_t counter = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+  assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+
+  /* Check if an injected conversion is ongoing */
+  if(hadc->State == HAL_ADC_STATE_BUSY_INJ)
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_BUSY_INJ_REG;
+  }
+  else
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_BUSY_REG;
+  }
+
+  /* Check if ADC peripheral is disabled in order to enable it and wait during
+  Tstab time the ADC's stabilization */
+  if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+  {
+    /* Enable the Peripheral */
+    __HAL_ADC_ENABLE(hadc);
+
+    /* Delay for ADC stabilization time */
+    /* Compute number of CPU cycles to wait for */
+    counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
+    while(counter != 0)
+    {
+      counter--;
+    }
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+
+  /* Check if Multimode enabled */
+  if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+  {
+    /* if no external trigger present enable software conversion of regular channels */
+    if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
+    {
+      /* Enable the selected ADC software conversion for regular group */
+      hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+    }
+  }
+  else
+  {
+    /* if instance of handle correspond to ADC1 and  no external trigger present enable software conversion of regular channels */
+    if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
+    {
+      /* Enable the selected ADC software conversion for regular group */
+        hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables ADC and stop conversion of regular channels.
+  *
+  * @note   Caution: This function will stop also injected channels.
+  *
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  *
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc)
+{
+  /* Disable the Peripheral */
+  __HAL_ADC_DISABLE(hadc);
+
+  /* Change ADC state */
+  hadc->State = HAL_ADC_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Poll for regular conversion complete
+  * @note   ADC conversion flags EOS (end of sequence) and EOC (end of
+  *         conversion) are cleared by this function.
+  * @note   This function cannot be used in a particular setup: ADC configured
+  *         in DMA mode and polling for end of each conversion (ADC init
+  *         parameter "EOCSelection" set to ADC_EOC_SINGLE_CONV).
+  *         In this case, DMA resets the flag EOC and polling cannot be
+  *         performed on each conversion. Nevertheless, polling can still
+  *         be performed on the complete sequence.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  Timeout: Timeout value in millisecond.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Verification that ADC configuration is compliant with polling for      */
+  /* each conversion:                                                       */
+  /* Particular case is ADC configured in DMA mode and ADC sequencer with   */
+  /* several ranks and polling for end of each conversion.                  */
+  /* For code simplicity sake, this particular case is generalized to       */
+  /* ADC configured in DMA mode and polling for end of each conversion.     */
+  if (HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_EOCS) &&
+      HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_DMA)    )
+  {
+    /* Update ADC state machine to error */
+    hadc->State = HAL_ADC_STATE_ERROR;
+
+    /* Process unlocked */
+    __HAL_UNLOCK(hadc);
+
+    return HAL_ERROR;
+  }
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check End of conversion flag */
+  while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC)))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hadc->State= HAL_ADC_STATE_TIMEOUT;
+        /* Process unlocked */
+        __HAL_UNLOCK(hadc);
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Check if an injected conversion is ready */
+  if(hadc->State == HAL_ADC_STATE_EOC_INJ)
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
+  }
+  else
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_EOC_REG;
+  }
+
+  /* Return ADC state */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Poll for conversion event
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  EventType: the ADC event type.
+  *          This parameter can be one of the following values:
+  *            @arg ADC_AWD_EVENT: ADC Analog watch Dog event.
+  *            @arg ADC_OVR_EVENT: ADC Overrun event.
+  * @param  Timeout: Timeout value in millisecond.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_ADC_EVENT_TYPE(EventType));
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check selected event flag */
+  while(!(__HAL_ADC_GET_FLAG(hadc,EventType)))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hadc->State= HAL_ADC_STATE_TIMEOUT;
+        /* Process unlocked */
+        __HAL_UNLOCK(hadc);
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Check analog watchdog flag */
+  if(EventType == ADC_AWD_EVENT)
+  {
+     /* Change ADC state */
+     hadc->State = HAL_ADC_STATE_AWD;
+
+     /* Clear the ADCx's analog watchdog flag */
+     __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD);
+  }
+  else
+  {
+     /* Change ADC state */
+     hadc->State = HAL_ADC_STATE_ERROR;
+
+     /* Clear the ADCx's Overrun flag */
+     __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
+  }
+
+  /* Return ADC state */
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Enables the interrupt and starts ADC conversion of regular channels.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc)
+{
+  __IO uint32_t counter = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+  assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+
+  /* Check if an injected conversion is ongoing */
+  if(hadc->State == HAL_ADC_STATE_BUSY_INJ)
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_BUSY_INJ_REG;
+  }
+  else
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_BUSY_REG;
+  }
+
+  /* Set ADC error code to none */
+  hadc->ErrorCode = HAL_ADC_ERROR_NONE;
+
+  /* Check if ADC peripheral is disabled in order to enable it and wait during
+     Tstab time the ADC's stabilization */
+  if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+  {
+    /* Enable the Peripheral */
+    __HAL_ADC_ENABLE(hadc);
+
+    /* Delay for ADC stabilization time */
+    /* Compute number of CPU cycles to wait for */
+    counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
+    while(counter != 0)
+    {
+      counter--;
+    }
+  }
+
+  /* Enable the ADC overrun interrupt */
+  __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
+
+  /* Enable the ADC end of conversion interrupt for regular group */
+  __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOC);
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+
+  /* Check if Multimode enabled */
+  if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+  {
+    /* if no external trigger present enable software conversion of regular channels */
+    if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
+    {
+      /* Enable the selected ADC software conversion for regular group */
+      hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+    }
+  }
+  else
+  {
+    /* if instance of handle correspond to ADC1 and  no external trigger present enable software conversion of regular channels */
+    if((hadc->Instance == (ADC_TypeDef*)0x40012000) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
+    {
+      /* Enable the selected ADC software conversion for regular group */
+        hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables the interrupt and stop ADC conversion of regular channels.
+  *
+  * @note   Caution: This function will stop also injected channels.
+  *
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc)
+{
+  /* Disable the ADC end of conversion interrupt for regular group */
+  __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
+
+  /* Disable the ADC end of conversion interrupt for injected group */
+  __HAL_ADC_DISABLE_IT(hadc, ADC_CR1_JEOCIE);
+
+  /* Enable the Peripheral */
+  __HAL_ADC_DISABLE(hadc);
+
+  /* Change ADC state */
+  hadc->State = HAL_ADC_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles ADC interrupt request
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+  assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion));
+  assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection));
+
+  tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC);
+  tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_EOC);
+  /* Check End of conversion flag for regular channels */
+  if(tmp1 && tmp2)
+  {
+    /* Check if an injected conversion is ready */
+    if(hadc->State == HAL_ADC_STATE_EOC_INJ)
+    {
+      /* Change ADC state */
+      hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
+    }
+    else
+    {
+      /* Change ADC state */
+      hadc->State = HAL_ADC_STATE_EOC_REG;
+    }
+
+    if((hadc->Init.ContinuousConvMode == DISABLE) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
+    {
+      if(hadc->Init.EOCSelection == ADC_EOC_SEQ_CONV)
+      {
+        /* DISABLE the ADC end of conversion interrupt for regular group */
+        __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
+
+        /* DISABLE the ADC overrun interrupt */
+        __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
+      }
+      else
+      {
+        if (hadc->NbrOfCurrentConversionRank == 0)
+        {
+          hadc->NbrOfCurrentConversionRank = hadc->Init.NbrOfConversion;
+        }
+
+        /* Decrement the number of conversion when an interrupt occurs */
+        hadc->NbrOfCurrentConversionRank--;
+
+        /* Check if all conversions are finished */
+        if(hadc->NbrOfCurrentConversionRank == 0)
+        {
+          /* DISABLE the ADC end of conversion interrupt for regular group */
+          __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
+
+          /* DISABLE the ADC overrun interrupt */
+          __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
+        }
+      }
+    }
+
+    /* Conversion complete callback */
+    HAL_ADC_ConvCpltCallback(hadc);
+
+   /* Clear the ADCx flag for regular end of conversion */
+    __HAL_ADC_CLEAR_FLAG(hadc,ADC_FLAG_EOC);
+  }
+
+  tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC);
+  tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_JEOC);
+  /* Check End of conversion flag for injected channels */
+  if(tmp1 && tmp2)
+  {
+    /* Check if a regular conversion is ready */
+    if(hadc->State == HAL_ADC_STATE_EOC_REG)
+    {
+      /* Change ADC state */
+      hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
+    }
+    else
+    {
+      /* Change ADC state */
+      hadc->State = HAL_ADC_STATE_EOC_INJ;
+    }
+
+    tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+    tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+    if(((hadc->Init.ContinuousConvMode == DISABLE) || tmp1) && tmp2)
+    {
+      /* DISABLE the ADC end of conversion interrupt for injected group */
+      __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC);
+    }
+
+    /* Conversion complete callback */
+    HAL_ADCEx_InjectedConvCpltCallback(hadc);
+
+   /* Clear the ADCx flag for injected end of conversion */
+    __HAL_ADC_CLEAR_FLAG(hadc,ADC_FLAG_JEOC);
+  }
+
+  tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD);
+  tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_AWD);
+  /* Check Analog watchdog flag */
+  if(tmp1 && tmp2)
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_AWD;
+
+    /* Clear the ADCx's Analog watchdog flag */
+    __HAL_ADC_CLEAR_FLAG(hadc,ADC_FLAG_AWD);
+
+    /* Level out of window callback */
+    HAL_ADC_LevelOutOfWindowCallback(hadc);
+  }
+
+  tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_OVR);
+  tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_OVR);
+  /* Check Overrun flag */
+  if(tmp1 && tmp2)
+  {
+    /* Change ADC state to overrun state */
+    hadc->State = HAL_ADC_STATE_ERROR;
+
+    /* Set ADC error code to overrun */
+    hadc->ErrorCode |= HAL_ADC_ERROR_OVR;
+
+    /* Clear the Overrun flag */
+    __HAL_ADC_CLEAR_FLAG(hadc,ADC_FLAG_OVR);
+
+    /* Error callback */
+    HAL_ADC_ErrorCallback(hadc);
+  }
+}
+
+/**
+  * @brief  Enables ADC DMA request after last transfer (Single-ADC mode) and enables ADC peripheral
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  pData: The destination Buffer address.
+  * @param  Length: The length of data to be transferred from ADC peripheral to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length)
+{
+  __IO uint32_t counter = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+  assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+
+  /* Enable ADC overrun interrupt */
+  __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
+
+  /* Enable ADC DMA mode */
+  hadc->Instance->CR2 |= ADC_CR2_DMA;
+
+  /* Set the DMA transfer complete callback */
+  hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt;
+
+  /* Set the DMA half transfer complete callback */
+  hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt;
+
+  /* Set the DMA error callback */
+  hadc->DMA_Handle->XferErrorCallback = ADC_DMAError ;
+
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length);
+
+  /* Change ADC state */
+  hadc->State = HAL_ADC_STATE_BUSY_REG;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+
+  /* Check if ADC peripheral is disabled in order to enable it and wait during
+     Tstab time the ADC's stabilization */
+  if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+  {
+    /* Enable the Peripheral */
+    __HAL_ADC_ENABLE(hadc);
+
+    /* Delay for ADC stabilization time */
+    /* Compute number of CPU cycles to wait for */
+    counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
+    while(counter != 0)
+    {
+      counter--;
+    }
+  }
+
+  /* if no external trigger present enable software conversion of regular channels */
+  if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
+  {
+    /* Enable the selected ADC software conversion for regular group */
+    hadc->Instance->CR2 |= ADC_CR2_SWSTART;
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables ADC DMA (Single-ADC mode) and disables ADC peripheral
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc)
+{
+  /* Disable the Peripheral */
+  __HAL_ADC_DISABLE(hadc);
+
+  /* Disable ADC overrun interrupt */
+  __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
+
+  /* Disable the selected ADC DMA mode */
+  hadc->Instance->CR2 &= ~ADC_CR2_DMA;
+
+  /* Disable the ADC DMA Stream */
+  HAL_DMA_Abort(hadc->DMA_Handle);
+
+  /* Change ADC state */
+  hadc->State = HAL_ADC_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Gets the converted value from data register of regular channel.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval Converted value
+  */
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc)
+{
+  /* Return the selected ADC converted value */
+  return hadc->Instance->DR;
+}
+
+/**
+  * @brief  Regular conversion complete callback in non blocking mode
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_ConvCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Regular conversion half DMA transfer callback in non blocking mode
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_ConvHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Analog watchdog callback in non blocking mode
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_LevelOoutOfWindowCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Error ADC callback.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief   	Peripheral Control functions
+ *
+ at verbatim
+ ===============================================================================
+             ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Configure regular channels.
+      (+) Configure injected channels.
+      (+) Configure multimode.
+      (+) Configure the analog watch dog.
+
+ at endverbatim
+  * @{
+  */
+
+  /**
+  * @brief  Configures for the selected ADC regular channel its corresponding
+  *         rank in the sequencer and its sample time.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  sConfig: ADC configuration structure.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig)
+{
+  __IO uint32_t counter = 0;
+
+  /* Check the parameters */
+  assert_param(IS_ADC_CHANNEL(sConfig->Channel));
+  assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank));
+  assert_param(IS_ADC_SAMPLE_TIME(sConfig->SamplingTime));
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+
+  /* if ADC_Channel_10 ... ADC_Channel_18 is selected */
+  if (sConfig->Channel > ADC_CHANNEL_9)
+  {
+    /* Clear the old sample time */
+    hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfig->Channel);
+
+    /* Set the new sample time */
+    hadc->Instance->SMPR1 |= ADC_SMPR1(sConfig->SamplingTime, sConfig->Channel);
+  }
+  else /* ADC_Channel include in ADC_Channel_[0..9] */
+  {
+    /* Clear the old sample time */
+    hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfig->Channel);
+
+    /* Set the new sample time */
+    hadc->Instance->SMPR2 |= ADC_SMPR2(sConfig->SamplingTime, sConfig->Channel);
+  }
+
+  /* For Rank 1 to 6 */
+  if (sConfig->Rank < 7)
+  {
+    /* Clear the old SQx bits for the selected rank */
+    hadc->Instance->SQR3 &= ~ADC_SQR3_RK(ADC_SQR3_SQ1, sConfig->Rank);
+
+    /* Set the SQx bits for the selected rank */
+    hadc->Instance->SQR3 |= ADC_SQR3_RK(sConfig->Channel, sConfig->Rank);
+  }
+  /* For Rank 7 to 12 */
+  else if (sConfig->Rank < 13)
+  {
+    /* Clear the old SQx bits for the selected rank */
+    hadc->Instance->SQR2 &= ~ADC_SQR2_RK(ADC_SQR2_SQ7, sConfig->Rank);
+
+    /* Set the SQx bits for the selected rank */
+    hadc->Instance->SQR2 |= ADC_SQR2_RK(sConfig->Channel, sConfig->Rank);
+  }
+  /* For Rank 13 to 16 */
+  else
+  {
+    /* Clear the old SQx bits for the selected rank */
+    hadc->Instance->SQR1 &= ~ADC_SQR1_RK(ADC_SQR1_SQ13, sConfig->Rank);
+
+    /* Set the SQx bits for the selected rank */
+    hadc->Instance->SQR1 |= ADC_SQR1_RK(sConfig->Channel, sConfig->Rank);
+  }
+
+  /* if ADC1 Channel_18 is selected enable VBAT Channel */
+  if ((hadc->Instance == ADC1) && (sConfig->Channel == ADC_CHANNEL_VBAT))
+  {
+    /* Enable the VBAT channel*/
+    ADC->CCR |= ADC_CCR_VBATE;
+  }
+
+  /* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
+  if ((hadc->Instance == ADC1) && ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) || (sConfig->Channel == ADC_CHANNEL_VREFINT)))
+  {
+    /* Enable the TSVREFE channel*/
+    ADC->CCR |= ADC_CCR_TSVREFE;
+
+    if((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR))
+    {
+      /* Delay for temperature sensor stabilization time */
+      /* Compute number of CPU cycles to wait for */
+      counter = (ADC_TEMPSENSOR_DELAY_US * (SystemCoreClock / 1000000));
+      while(counter != 0)
+      {
+        counter--;
+      }
+    }
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the analog watchdog.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  AnalogWDGConfig : pointer to an ADC_AnalogWDGConfTypeDef structure
+  *         that contains the configuration information of ADC analog watchdog.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig)
+{
+#ifdef USE_FULL_ASSERT
+  uint32_t tmp = 0;
+#endif /* USE_FULL_ASSERT  */
+
+  /* Check the parameters */
+  assert_param(IS_ADC_ANALOG_WATCHDOG(AnalogWDGConfig->WatchdogMode));
+  assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel));
+  assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode));
+
+#ifdef USE_FULL_ASSERT
+  tmp = ADC_GET_RESOLUTION(hadc);
+  assert_param(IS_ADC_RANGE(tmp, AnalogWDGConfig->HighThreshold));
+  assert_param(IS_ADC_RANGE(tmp, AnalogWDGConfig->LowThreshold));
+#endif /* USE_FULL_ASSERT  */
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+
+  if(AnalogWDGConfig->ITMode == ENABLE)
+  {
+    /* Enable the ADC Analog watchdog interrupt */
+    __HAL_ADC_ENABLE_IT(hadc, ADC_IT_AWD);
+  }
+  else
+  {
+    /* Disable the ADC Analog watchdog interrupt */
+    __HAL_ADC_DISABLE_IT(hadc, ADC_IT_AWD);
+  }
+
+  /* Clear AWDEN, JAWDEN and AWDSGL bits */
+  hadc->Instance->CR1 &=  ~(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN | ADC_CR1_AWDEN);
+
+  /* Set the analog watchdog enable mode */
+  hadc->Instance->CR1 |= AnalogWDGConfig->WatchdogMode;
+
+  /* Set the high threshold */
+  hadc->Instance->HTR = AnalogWDGConfig->HighThreshold;
+
+  /* Set the low threshold */
+  hadc->Instance->LTR = AnalogWDGConfig->LowThreshold;
+
+  /* Clear the Analog watchdog channel select bits */
+  hadc->Instance->CR1 &= ~ADC_CR1_AWDCH;
+
+  /* Set the Analog watchdog channel */
+  hadc->Instance->CR1 |= (uint32_t)((uint16_t)(AnalogWDGConfig->Channel));
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Exported_Functions_Group4 ADC Peripheral State functions
+ *  @brief   ADC Peripheral State functions
+ *
+ at verbatim
+ ===============================================================================
+            ##### Peripheral State and errors functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Check the ADC state
+      (+) Check the ADC Error
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  return the ADC state
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL state
+  */
+HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc)
+{
+  /* Return ADC state */
+  return hadc->State;
+}
+
+/**
+  * @brief  Return the ADC error code
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval ADC Error Code
+  */
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc)
+{
+  return hadc->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup ADC_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Initializes the ADCx peripheral according to the specified parameters
+  *         in the ADC_InitStruct without initializing the ADC MSP.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+static void ADC_Init(ADC_HandleTypeDef* hadc)
+{
+  /* Set ADC parameters */
+  /* Set the ADC clock prescaler */
+  ADC->CCR &= ~(ADC_CCR_ADCPRE);
+  ADC->CCR |=  hadc->Init.ClockPrescaler;
+
+  /* Set ADC scan mode */
+  hadc->Instance->CR1 &= ~(ADC_CR1_SCAN);
+  hadc->Instance->CR1 |=  ADC_CR1_SCANCONV(hadc->Init.ScanConvMode);
+
+  /* Set ADC resolution */
+  hadc->Instance->CR1 &= ~(ADC_CR1_RES);
+  hadc->Instance->CR1 |=  hadc->Init.Resolution;
+
+  /* Set ADC data alignment */
+  hadc->Instance->CR2 &= ~(ADC_CR2_ALIGN);
+  hadc->Instance->CR2 |= hadc->Init.DataAlign;
+
+  /* Enable external trigger if trigger selection is different of software  */
+  /* start.                                                                 */
+  /* Note: This configuration keeps the hardware feature of parameter       */
+  /*       ExternalTrigConvEdge "trigger edge none" equivalent to           */
+  /*       software start.                                                  */
+  if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START)
+  {
+    /* Select external trigger to start conversion */
+    hadc->Instance->CR2 &= ~(ADC_CR2_EXTSEL);
+    hadc->Instance->CR2 |= hadc->Init.ExternalTrigConv;
+
+    /* Select external trigger polarity */
+    hadc->Instance->CR2 &= ~(ADC_CR2_EXTEN);
+    hadc->Instance->CR2 |= hadc->Init.ExternalTrigConvEdge;
+  }
+  else
+  {
+    /* Reset the external trigger */
+    hadc->Instance->CR2 &= ~(ADC_CR2_EXTSEL);
+    hadc->Instance->CR2 &= ~(ADC_CR2_EXTEN);
+  }
+
+  /* Enable or disable ADC continuous conversion mode */
+  hadc->Instance->CR2 &= ~(ADC_CR2_CONT);
+  hadc->Instance->CR2 |= ADC_CR2_CONTINUOUS(hadc->Init.ContinuousConvMode);
+
+  if(hadc->Init.DiscontinuousConvMode != DISABLE)
+  {
+    assert_param(IS_ADC_REGULAR_DISC_NUMBER(hadc->Init.NbrOfDiscConversion));
+
+    /* Enable the selected ADC regular discontinuous mode */
+    hadc->Instance->CR1 |= (uint32_t)ADC_CR1_DISCEN;
+
+    /* Set the number of channels to be converted in discontinuous mode */
+    hadc->Instance->CR1 &= ~(ADC_CR1_DISCNUM);
+    hadc->Instance->CR1 |=  ADC_CR1_DISCONTINUOUS(hadc->Init.NbrOfDiscConversion);
+  }
+  else
+  {
+    /* Disable the selected ADC regular discontinuous mode */
+    hadc->Instance->CR1 &= ~(ADC_CR1_DISCEN);
+  }
+
+  /* Set ADC number of conversion */
+  hadc->Instance->SQR1 &= ~(ADC_SQR1_L);
+  hadc->Instance->SQR1 |=  ADC_SQR1(hadc->Init.NbrOfConversion);
+
+  /* Enable or disable ADC DMA continuous request */
+  hadc->Instance->CR2 &= ~(ADC_CR2_DDS);
+  hadc->Instance->CR2 |= ADC_CR2_DMAContReq(hadc->Init.DMAContinuousRequests);
+
+  /* Enable or disable ADC end of conversion selection */
+  hadc->Instance->CR2 &= ~(ADC_CR2_EOCS);
+  hadc->Instance->CR2 |= ADC_CR2_EOCSelection(hadc->Init.EOCSelection);
+}
+
+/**
+  * @brief  DMA transfer complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma)
+{
+  ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Check if an injected conversion is ready */
+  if(hadc->State == HAL_ADC_STATE_EOC_INJ)
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
+  }
+  else
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_EOC_REG;
+  }
+
+  HAL_ADC_ConvCpltCallback(hadc);
+}
+
+/**
+  * @brief  DMA half transfer complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma)
+{
+  ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  /* Conversion complete callback */
+  HAL_ADC_ConvHalfCpltCallback(hadc);
+}
+
+/**
+  * @brief  DMA error callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void ADC_DMAError(DMA_HandleTypeDef *hdma)
+{
+  ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hadc->State= HAL_ADC_STATE_ERROR;
+  /* Set ADC error code to DMA error */
+  hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
+  HAL_ADC_ErrorCallback(hadc);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_ADC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c
new file mode 100644
index 0000000..37a9c4c
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c
@@ -0,0 +1,872 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_adc_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   This file provides firmware functions to manage the following
+  *          functionalities of the ADC extension peripheral:
+  *           + Extended features functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    (#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit():
+       (##) Enable the ADC interface clock using __HAL_RCC_ADC_CLK_ENABLE()
+       (##) ADC pins configuration
+             (+++) Enable the clock for the ADC GPIOs using the following function:
+                   __HAL_RCC_GPIOx_CLK_ENABLE()
+             (+++) Configure these ADC pins in analog mode using HAL_GPIO_Init()
+       (##) In case of using interrupts (e.g. HAL_ADC_Start_IT())
+             (+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority()
+             (+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ()
+             (+++) In ADC IRQ handler, call HAL_ADC_IRQHandler()
+      (##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA())
+             (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE()
+             (+++) Configure and enable two DMA streams stream for managing data
+                 transfer from peripheral to memory (output stream)
+             (+++) Associate the initialized DMA handle to the ADC DMA handle
+                 using  __HAL_LINKDMA()
+             (+++) Configure the priority and enable the NVIC for the transfer complete
+                 interrupt on the two DMA Streams. The output stream should have higher
+                 priority than the input stream.
+     (#) Configure the ADC Prescaler, conversion resolution and data alignment
+         using the HAL_ADC_Init() function.
+
+     (#) Configure the ADC Injected channels group features, use HAL_ADC_Init()
+         and HAL_ADC_ConfigChannel() functions.
+
+     (#) Three operation modes are available within this driver :
+
+     *** Polling mode IO operation ***
+     =================================
+     [..]
+       (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart()
+       (+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage
+           user can specify the value of timeout according to his end application
+       (+) To read the ADC converted values, use the HAL_ADCEx_InjectedGetValue() function.
+       (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop()
+
+     *** Interrupt mode IO operation ***
+     ===================================
+     [..]
+       (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_IT()
+       (+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine
+       (+) At ADC end of conversion HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback
+       (+) In case of ADC Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback
+       (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_IT()
+
+
+     *** DMA mode IO operation ***
+     ==============================
+     [..]
+       (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_DMA(), at this stage the user specify the length
+           of data to be transferred at each end of conversion
+       (+) At The end of data transfer ba HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback
+       (+) In case of transfer Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback
+        (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_DMA()
+
+     *** Multi mode ADCs Regular channels configuration ***
+     ======================================================
+     [..]
+       (+) Select the Multi mode ADC regular channels features (dual or triple mode)
+          and configure the DMA mode using HAL_ADCEx_MultiModeConfigChannel() functions.
+       (+) Start the ADC peripheral using HAL_ADCEx_MultiModeStart_DMA(), at this stage the user specify the length
+           of data to be transferred at each end of conversion
+       (+) Read the ADCs converted values using the HAL_ADCEx_MultiModeGetValue() function.
+
+
+    @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup ADCEx ADCEx
+  * @brief ADC Extended driver modules
+  * @{
+  */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup ADCEx_Private_Functions
+  * @{
+  */
+/* Private function prototypes -----------------------------------------------*/
+static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma);
+static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma);
+static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Functions ADC Exported Functions
+  * @{
+  */
+
+/** @defgroup ADCEx_Exported_Functions_Group1  Extended features functions
+  *  @brief    Extended features functions
+  *
+ at verbatim
+ ===============================================================================
+                 ##### Extended features functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Start conversion of injected channel.
+      (+) Stop conversion of injected channel.
+      (+) Start multimode and enable DMA transfer.
+      (+) Stop multimode and disable DMA transfer.
+      (+) Get result of injected channel conversion.
+      (+) Get result of multimode conversion.
+      (+) Configure injected channels.
+      (+) Configure multimode.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables the selected ADC software start conversion of the injected channels.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc)
+{
+  __IO uint32_t counter = 0;
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+
+  /* Check if a regular conversion is ongoing */
+  if(hadc->State == HAL_ADC_STATE_BUSY_REG)
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_BUSY_INJ_REG;
+  }
+  else
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_BUSY_INJ;
+  }
+
+  /* Check if ADC peripheral is disabled in order to enable it and wait during
+     Tstab time the ADC's stabilization */
+  if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+  {
+    /* Enable the Peripheral */
+    __HAL_ADC_ENABLE(hadc);
+
+    /* Delay for temperature sensor stabilization time */
+    /* Compute number of CPU cycles to wait for */
+    counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
+    while(counter != 0)
+    {
+      counter--;
+    }
+  }
+
+  /* Check if Multimode enabled */
+  if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+  {
+    tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+    tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+    if(tmp1 && tmp2)
+    {
+      /* Enable the selected ADC software conversion for injected group */
+      hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
+    }
+  }
+  else
+  {
+    tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+    tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+    if((hadc->Instance == ADC1) && tmp1 && tmp2)
+    {
+      /* Enable the selected ADC software conversion for injected group */
+      hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
+    }
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the interrupt and starts ADC conversion of injected channels.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  *
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc)
+{
+  __IO uint32_t counter = 0;
+  uint32_t tmp1 = 0, tmp2 =0;
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+
+  /* Check if a regular conversion is ongoing */
+  if(hadc->State == HAL_ADC_STATE_BUSY_REG)
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_BUSY_INJ_REG;
+  }
+  else
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_BUSY_INJ;
+  }
+
+  /* Set ADC error code to none */
+  hadc->ErrorCode = HAL_ADC_ERROR_NONE;
+
+  /* Check if ADC peripheral is disabled in order to enable it and wait during
+     Tstab time the ADC's stabilization */
+  if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+  {
+    /* Enable the Peripheral */
+    __HAL_ADC_ENABLE(hadc);
+
+    /* Delay for temperature sensor stabilization time */
+    /* Compute number of CPU cycles to wait for */
+    counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
+    while(counter != 0)
+    {
+      counter--;
+    }
+  }
+
+  /* Enable the ADC end of conversion interrupt for injected group */
+  __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC);
+
+  /* Enable the ADC overrun interrupt */
+  __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
+
+  /* Check if Multimode enabled */
+  if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+  {
+    tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+    tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+    if(tmp1 && tmp2)
+    {
+      /* Enable the selected ADC software conversion for injected group */
+      hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
+    }
+  }
+  else
+  {
+    tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+    tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+    if((hadc->Instance == ADC1) && tmp1 && tmp2)
+    {
+      /* Enable the selected ADC software conversion for injected group */
+      hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
+    }
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables ADC and stop conversion of injected channels.
+  *
+  * @note   Caution: This function will stop also regular channels.
+  *
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc)
+{
+  /* Disable the Peripheral */
+  __HAL_ADC_DISABLE(hadc);
+
+  /* Change ADC state */
+  hadc->State = HAL_ADC_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Poll for injected conversion complete
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  Timeout: Timeout value in millisecond.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check End of conversion flag */
+  while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC)))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hadc->State= HAL_ADC_STATE_TIMEOUT;
+        /* Process unlocked */
+        __HAL_UNLOCK(hadc);
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Check if a regular conversion is ready */
+  if(hadc->State == HAL_ADC_STATE_EOC_REG)
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
+  }
+  else
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_EOC_INJ;
+  }
+
+  /* Return ADC state */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables the interrupt and stop ADC conversion of injected channels.
+  *
+  * @note   Caution: This function will stop also regular channels.
+  *
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc)
+{
+  /* Disable the ADC end of conversion interrupt for regular group */
+  __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
+
+  /* Disable the ADC end of conversion interrupt for injected group */
+  __HAL_ADC_DISABLE_IT(hadc, ADC_CR1_JEOCIE);
+
+  /* Enable the Peripheral */
+  __HAL_ADC_DISABLE(hadc);
+
+  /* Change ADC state */
+  hadc->State = HAL_ADC_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Gets the converted value from data register of injected channel.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  InjectedRank: the ADC injected rank.
+  *          This parameter can be one of the following values:
+  *            @arg ADC_INJECTED_RANK_1: Injected Channel1 selected
+  *            @arg ADC_INJECTED_RANK_2: Injected Channel2 selected
+  *            @arg ADC_INJECTED_RANK_3: Injected Channel3 selected
+  *            @arg ADC_INJECTED_RANK_4: Injected Channel4 selected
+  * @retval None
+  */
+uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank)
+{
+  __IO uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_ADC_INJECTED_RANK(InjectedRank));
+
+   /* Clear the ADCx's flag for injected end of conversion */
+   __HAL_ADC_CLEAR_FLAG(hadc,ADC_FLAG_JEOC);
+
+  /* Return the selected ADC converted value */
+  switch(InjectedRank)
+  {
+    case ADC_INJECTED_RANK_4:
+    {
+      tmp =  hadc->Instance->JDR4;
+    }
+    break;
+    case ADC_INJECTED_RANK_3:
+    {
+      tmp =  hadc->Instance->JDR3;
+    }
+    break;
+    case ADC_INJECTED_RANK_2:
+    {
+      tmp =  hadc->Instance->JDR2;
+    }
+    break;
+    case ADC_INJECTED_RANK_1:
+    {
+      tmp =  hadc->Instance->JDR1;
+    }
+    break;
+    default:
+    break;
+  }
+  return tmp;
+}
+
+/**
+  * @brief  Enables ADC DMA request after last transfer (Multi-ADC mode) and enables ADC peripheral
+  *
+  * @note   Caution: This function must be used only with the ADC master.
+  *
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  pData:   Pointer to buffer in which transferred from ADC peripheral to memory will be stored.
+  * @param  Length:  The length of data to be transferred from ADC peripheral to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length)
+{
+  __IO uint32_t counter = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+  assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests));
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+
+  /* Enable ADC overrun interrupt */
+  __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
+
+  if (hadc->Init.DMAContinuousRequests != DISABLE)
+  {
+    /* Enable the selected ADC DMA request after last transfer */
+    ADC->CCR |= ADC_CCR_DDS;
+  }
+  else
+  {
+    /* Disable the selected ADC EOC rising on each regular channel conversion */
+    ADC->CCR &= ~ADC_CCR_DDS;
+  }
+
+  /* Set the DMA transfer complete callback */
+  hadc->DMA_Handle->XferCpltCallback = ADC_MultiModeDMAConvCplt;
+
+  /* Set the DMA half transfer complete callback */
+  hadc->DMA_Handle->XferHalfCpltCallback = ADC_MultiModeDMAHalfConvCplt;
+
+  /* Set the DMA error callback */
+  hadc->DMA_Handle->XferErrorCallback = ADC_MultiModeDMAError ;
+
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&ADC->CDR, (uint32_t)pData, Length);
+
+  /* Change ADC state */
+  hadc->State = HAL_ADC_STATE_BUSY_REG;
+
+  /* Check if ADC peripheral is disabled in order to enable it and wait during
+     Tstab time the ADC's stabilization */
+  if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+  {
+    /* Enable the Peripheral */
+    __HAL_ADC_ENABLE(hadc);
+
+    /* Delay for temperature sensor stabilization time */
+    /* Compute number of CPU cycles to wait for */
+    counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
+    while(counter != 0)
+    {
+      counter--;
+    }
+  }
+
+  /* if no external trigger present enable software conversion of regular channels */
+  if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
+  {
+    /* Enable the selected ADC software conversion for regular group */
+    hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables ADC DMA (multi-ADC mode) and disables ADC peripheral
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc)
+{
+  /* Process locked */
+  __HAL_LOCK(hadc);
+
+  /* Enable the Peripheral */
+  __HAL_ADC_DISABLE(hadc);
+
+  /* Disable ADC overrun interrupt */
+  __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
+
+  /* Disable the selected ADC DMA request after last transfer */
+  ADC->CCR &= ~ADC_CCR_DDS;
+
+  /* Disable the ADC DMA Stream */
+  HAL_DMA_Abort(hadc->DMA_Handle);
+
+  /* Change ADC state */
+  hadc->State = HAL_ADC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the last ADC1, ADC2 and ADC3 regular conversions results
+  *         data in the selected multi mode.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval The converted data value.
+  */
+uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc)
+{
+  /* Return the multi mode conversion value */
+  return ADC->CDR;
+}
+
+/**
+  * @brief  Injected conversion complete callback in non blocking mode
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_InjectedConvCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Configures for the selected ADC injected channel its corresponding
+  *         rank in the sequencer and its sample time.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  sConfigInjected: ADC configuration structure for injected channel.
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_InjectionConfTypeDef* sConfigInjected)
+{
+
+#ifdef USE_FULL_ASSERT
+  uint32_t tmp = 0;
+#endif /* USE_FULL_ASSERT  */
+
+  /* Check the parameters */
+  assert_param(IS_ADC_CHANNEL(sConfigInjected->InjectedChannel));
+  assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank));
+  assert_param(IS_ADC_SAMPLE_TIME(sConfigInjected->InjectedSamplingTime));
+  assert_param(IS_ADC_EXT_INJEC_TRIG(sConfigInjected->ExternalTrigInjecConv));
+  assert_param(IS_ADC_INJECTED_LENGTH(sConfigInjected->InjectedNbrOfConversion));
+  assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->AutoInjectedConv));
+  assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjectedDiscontinuousConvMode));
+
+#ifdef USE_FULL_ASSERT
+  tmp = ADC_GET_RESOLUTION(hadc);
+  assert_param(IS_ADC_RANGE(tmp, sConfigInjected->InjectedOffset));
+#endif /* USE_FULL_ASSERT  */
+
+  if(sConfigInjected->ExternalTrigInjecConvEdge != ADC_INJECTED_SOFTWARE_START)
+  {
+    assert_param(IS_ADC_EXT_INJEC_TRIG_EDGE(sConfigInjected->ExternalTrigInjecConvEdge));
+  }
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+
+  /* if ADC_Channel_10 ... ADC_Channel_18 is selected */
+  if (sConfigInjected->InjectedChannel > ADC_CHANNEL_9)
+  {
+    /* Clear the old sample time */
+    hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfigInjected->InjectedChannel);
+
+    /* Set the new sample time */
+    hadc->Instance->SMPR1 |= ADC_SMPR1(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
+  }
+  else /* ADC_Channel include in ADC_Channel_[0..9] */
+  {
+    /* Clear the old sample time */
+    hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfigInjected->InjectedChannel);
+
+    /* Set the new sample time */
+    hadc->Instance->SMPR2 |= ADC_SMPR2(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
+  }
+
+  /*---------------------------- ADCx JSQR Configuration -----------------*/
+  hadc->Instance->JSQR &= ~(ADC_JSQR_JL);
+  hadc->Instance->JSQR |=  ADC_SQR1(sConfigInjected->InjectedNbrOfConversion);
+
+  /* Rank configuration */
+
+  /* Clear the old SQx bits for the selected rank */
+  hadc->Instance->JSQR &= ~ADC_JSQR(ADC_JSQR_JSQ1, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
+
+  /* Set the SQx bits for the selected rank */
+  hadc->Instance->JSQR |= ADC_JSQR(sConfigInjected->InjectedChannel, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
+
+  /* Enable external trigger if trigger selection is different of software  */
+  /* start.                                                                 */
+  /* Note: This configuration keeps the hardware feature of parameter       */
+  /*       ExternalTrigConvEdge "trigger edge none" equivalent to           */
+  /*       software start.                                                  */
+  if(sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
+  {
+    /* Select external trigger to start conversion */
+    hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
+    hadc->Instance->CR2 |=  sConfigInjected->ExternalTrigInjecConv;
+
+    /* Select external trigger polarity */
+    hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);
+    hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConvEdge;
+  }
+  else
+  {
+    /* Reset the external trigger */
+    hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
+    hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);
+  }
+
+  if (sConfigInjected->AutoInjectedConv != DISABLE)
+  {
+    /* Enable the selected ADC automatic injected group conversion */
+    hadc->Instance->CR1 |= ADC_CR1_JAUTO;
+  }
+  else
+  {
+    /* Disable the selected ADC automatic injected group conversion */
+    hadc->Instance->CR1 &= ~(ADC_CR1_JAUTO);
+  }
+
+  if (sConfigInjected->InjectedDiscontinuousConvMode != DISABLE)
+  {
+    /* Enable the selected ADC injected discontinuous mode */
+    hadc->Instance->CR1 |= ADC_CR1_JDISCEN;
+  }
+  else
+  {
+    /* Disable the selected ADC injected discontinuous mode */
+    hadc->Instance->CR1 &= ~(ADC_CR1_JDISCEN);
+  }
+
+  switch(sConfigInjected->InjectedRank)
+  {
+    case 1:
+      /* Set injected channel 1 offset */
+      hadc->Instance->JOFR1 &= ~(ADC_JOFR1_JOFFSET1);
+      hadc->Instance->JOFR1 |= sConfigInjected->InjectedOffset;
+      break;
+    case 2:
+      /* Set injected channel 2 offset */
+      hadc->Instance->JOFR2 &= ~(ADC_JOFR2_JOFFSET2);
+      hadc->Instance->JOFR2 |= sConfigInjected->InjectedOffset;
+      break;
+    case 3:
+      /* Set injected channel 3 offset */
+      hadc->Instance->JOFR3 &= ~(ADC_JOFR3_JOFFSET3);
+      hadc->Instance->JOFR3 |= sConfigInjected->InjectedOffset;
+      break;
+    default:
+      /* Set injected channel 4 offset */
+      hadc->Instance->JOFR4 &= ~(ADC_JOFR4_JOFFSET4);
+      hadc->Instance->JOFR4 |= sConfigInjected->InjectedOffset;
+      break;
+  }
+
+  /* if ADC1 Channel_18 is selected enable VBAT Channel */
+  if ((hadc->Instance == ADC1) && (sConfigInjected->InjectedChannel == ADC_CHANNEL_VBAT))
+  {
+    /* Enable the VBAT channel*/
+    ADC->CCR |= ADC_CCR_VBATE;
+  }
+
+  /* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
+  if ((hadc->Instance == ADC1) && ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT)))
+  {
+    /* Enable the TSVREFE channel*/
+    ADC->CCR |= ADC_CCR_TSVREFE;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the ADC multi-mode
+  * @param  hadc      : pointer to a ADC_HandleTypeDef structure that contains
+  *                     the configuration information for the specified ADC.
+  * @param  multimode : pointer to an ADC_MultiModeTypeDef structure that contains
+  *                     the configuration information for  multimode.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_MODE(multimode->Mode));
+  assert_param(IS_ADC_DMA_ACCESS_MODE(multimode->DMAAccessMode));
+  assert_param(IS_ADC_SAMPLING_DELAY(multimode->TwoSamplingDelay));
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+
+  /* Set ADC mode */
+  ADC->CCR &= ~(ADC_CCR_MULTI);
+  ADC->CCR |= multimode->Mode;
+
+  /* Set the ADC DMA access mode */
+  ADC->CCR &= ~(ADC_CCR_DMA);
+  ADC->CCR |= multimode->DMAAccessMode;
+
+  /* Set delay between two sampling phases */
+  ADC->CCR &= ~(ADC_CCR_DELAY);
+  ADC->CCR |= multimode->TwoSamplingDelay;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+  /**
+  * @brief  DMA transfer complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma)
+{
+    ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Check if an injected conversion is ready */
+  if(hadc->State == HAL_ADC_STATE_EOC_INJ)
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
+  }
+  else
+  {
+    /* Change ADC state */
+    hadc->State = HAL_ADC_STATE_EOC_REG;
+  }
+
+    HAL_ADC_ConvCpltCallback(hadc);
+}
+
+/**
+  * @brief  DMA half transfer complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma)
+{
+    ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+    /* Conversion complete callback */
+    HAL_ADC_ConvHalfCpltCallback(hadc);
+}
+
+/**
+  * @brief  DMA error callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma)
+{
+    ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+    hadc->State= HAL_ADC_STATE_ERROR;
+    /* Set ADC error code to DMA error */
+    hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
+    HAL_ADC_ErrorCallback(hadc);
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_ADC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c
new file mode 100644
index 0000000..bea728a
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c
@@ -0,0 +1,1438 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_can.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   This file provides firmware functions to manage the following
+  *          functionalities of the Controller Area Network (CAN) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State and Error functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      (#) Enable the CAN controller interface clock using
+          __HAL_RCC_CAN1_CLK_ENABLE() for CAN1 and __HAL_RCC_CAN2_CLK_ENABLE() for CAN2
+      - at - In case you are using CAN2 only, you have to enable the CAN1 clock.
+
+      (#) CAN pins configuration
+        (++) Enable the clock for the CAN GPIOs using the following function:
+             __GPIOx_CLK_ENABLE()
+        (++) Connect and configure the involved CAN pins to AF9 using the
+              following function HAL_GPIO_Init()
+
+      (#) Initialize and configure the CAN using CAN_Init() function.
+
+      (#) Transmit the desired CAN frame using HAL_CAN_Transmit() function.
+
+      (#) Receive a CAN frame using HAL_CAN_Receive() function.
+
+     *** Polling mode IO operation ***
+     =================================
+     [..]
+       (+) Start the CAN peripheral transmission and wait the end of this operation
+           using HAL_CAN_Transmit(), at this stage user can specify the value of timeout
+           according to his end application
+       (+) Start the CAN peripheral reception and wait the end of this operation
+           using HAL_CAN_Receive(), at this stage user can specify the value of timeout
+           according to his end application
+
+     *** Interrupt mode IO operation ***
+     ===================================
+     [..]
+       (+) Start the CAN peripheral transmission using HAL_CAN_Transmit_IT()
+       (+) Start the CAN peripheral reception using HAL_CAN_Receive_IT()
+       (+) Use HAL_CAN_IRQHandler() called under the used CAN Interrupt subroutine
+       (+) At CAN end of transmission HAL_CAN_TxCpltCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_CAN_TxCpltCallback
+       (+) In case of CAN Error, HAL_CAN_ErrorCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_CAN_ErrorCallback
+
+     *** CAN HAL driver macros list ***
+     =============================================
+     [..]
+       Below the list of most used macros in CAN HAL driver.
+
+      (+) __HAL_CAN_ENABLE_IT: Enable the specified CAN interrupts
+      (+) __HAL_CAN_DISABLE_IT: Disable the specified CAN interrupts
+      (+) __HAL_CAN_GET_IT_SOURCE: Check if the specified CAN interrupt source is enabled or disabled
+      (+) __HAL_CAN_CLEAR_FLAG: Clear the CAN's pending flags
+      (+) __HAL_CAN_GET_FLAG: Get the selected CAN's flag status
+
+     [..]
+      (@) You can refer to the CAN HAL driver header file for more useful macros
+
+  @endverbatim
+
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CAN CAN
+  * @brief CAN driver modules
+  * @{
+  */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup CAN_Private_Constants
+  * @{
+  */
+#define CAN_TIMEOUT_VALUE  10
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup CAN_Private_Functions
+  * @{
+  */
+static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber);
+static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CAN_Exported_Functions CAN Exported Functions
+  * @{
+  */
+
+/** @defgroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the CAN.
+      (+) De-initialize the CAN.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CAN peripheral according to the specified
+  *         parameters in the CAN_InitStruct.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan)
+{
+  uint32_t InitStatus = 3;
+  uint32_t tickstart = 0;
+
+  /* Check CAN handle */
+  if(hcan == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
+  assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TTCM));
+  assert_param(IS_FUNCTIONAL_STATE(hcan->Init.ABOM));
+  assert_param(IS_FUNCTIONAL_STATE(hcan->Init.AWUM));
+  assert_param(IS_FUNCTIONAL_STATE(hcan->Init.NART));
+  assert_param(IS_FUNCTIONAL_STATE(hcan->Init.RFLM));
+  assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TXFP));
+  assert_param(IS_CAN_MODE(hcan->Init.Mode));
+  assert_param(IS_CAN_SJW(hcan->Init.SJW));
+  assert_param(IS_CAN_BS1(hcan->Init.BS1));
+  assert_param(IS_CAN_BS2(hcan->Init.BS2));
+  assert_param(IS_CAN_PRESCALER(hcan->Init.Prescaler));
+
+
+  if(hcan->State == HAL_CAN_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hcan->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_CAN_MspInit(hcan);
+  }
+
+  /* Initialize the CAN state*/
+  hcan->State = HAL_CAN_STATE_BUSY;
+
+  /* Exit from sleep mode */
+  hcan->Instance->MCR &= (~(uint32_t)CAN_MCR_SLEEP);
+
+  /* Request initialisation */
+  hcan->Instance->MCR |= CAN_MCR_INRQ ;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait the acknowledge */
+  while((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
+  {
+    if((HAL_GetTick() - tickstart ) > CAN_TIMEOUT_VALUE)
+    {
+      hcan->State= HAL_CAN_STATE_TIMEOUT;
+      /* Process unlocked */
+      __HAL_UNLOCK(hcan);
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Check acknowledge */
+  if ((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
+  {
+    InitStatus = CAN_INITSTATUS_FAILED;
+  }
+  else
+  {
+    /* Set the time triggered communication mode */
+    if (hcan->Init.TTCM == ENABLE)
+    {
+      hcan->Instance->MCR |= CAN_MCR_TTCM;
+    }
+    else
+    {
+      hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TTCM;
+    }
+
+    /* Set the automatic bus-off management */
+    if (hcan->Init.ABOM == ENABLE)
+    {
+      hcan->Instance->MCR |= CAN_MCR_ABOM;
+    }
+    else
+    {
+      hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_ABOM;
+    }
+
+    /* Set the automatic wake-up mode */
+    if (hcan->Init.AWUM == ENABLE)
+    {
+      hcan->Instance->MCR |= CAN_MCR_AWUM;
+    }
+    else
+    {
+      hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_AWUM;
+    }
+
+    /* Set the no automatic retransmission */
+    if (hcan->Init.NART == ENABLE)
+    {
+      hcan->Instance->MCR |= CAN_MCR_NART;
+    }
+    else
+    {
+      hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_NART;
+    }
+
+    /* Set the receive FIFO locked mode */
+    if (hcan->Init.RFLM == ENABLE)
+    {
+      hcan->Instance->MCR |= CAN_MCR_RFLM;
+    }
+    else
+    {
+      hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_RFLM;
+    }
+
+    /* Set the transmit FIFO priority */
+    if (hcan->Init.TXFP == ENABLE)
+    {
+      hcan->Instance->MCR |= CAN_MCR_TXFP;
+    }
+    else
+    {
+      hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TXFP;
+    }
+
+    /* Set the bit timing register */
+    hcan->Instance->BTR = (uint32_t)((uint32_t)hcan->Init.Mode) | \
+                ((uint32_t)hcan->Init.SJW) | \
+                ((uint32_t)hcan->Init.BS1) | \
+                ((uint32_t)hcan->Init.BS2) | \
+               ((uint32_t)hcan->Init.Prescaler - 1);
+
+    /* Request leave initialisation */
+    hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+   /* Wait the acknowledge */
+   while((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
+   {
+    if((HAL_GetTick() - tickstart ) > CAN_TIMEOUT_VALUE)
+     {
+       hcan->State= HAL_CAN_STATE_TIMEOUT;
+       /* Process unlocked */
+       __HAL_UNLOCK(hcan);
+       return HAL_TIMEOUT;
+     }
+   }
+
+    /* Check acknowledged */
+    if ((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
+    {
+      InitStatus = CAN_INITSTATUS_FAILED;
+    }
+    else
+    {
+      InitStatus = CAN_INITSTATUS_SUCCESS;
+    }
+  }
+
+  if(InitStatus == CAN_INITSTATUS_SUCCESS)
+  {
+    /* Set CAN error code to none */
+    hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+
+    /* Initialize the CAN state */
+    hcan->State = HAL_CAN_STATE_READY;
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    /* Initialize the CAN state */
+    hcan->State = HAL_CAN_STATE_ERROR;
+
+    /* Return function status */
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Configures the CAN reception filter according to the specified
+  *         parameters in the CAN_FilterInitStruct.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @param  sFilterConfig: pointer to a CAN_FilterConfTypeDef structure that
+  *         contains the filter configuration information.
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig)
+{
+  uint32_t filternbrbitpos = 0;
+
+  /* Check the parameters */
+  assert_param(IS_CAN_FILTER_NUMBER(sFilterConfig->FilterNumber));
+  assert_param(IS_CAN_FILTER_MODE(sFilterConfig->FilterMode));
+  assert_param(IS_CAN_FILTER_SCALE(sFilterConfig->FilterScale));
+  assert_param(IS_CAN_FILTER_FIFO(sFilterConfig->FilterFIFOAssignment));
+  assert_param(IS_FUNCTIONAL_STATE(sFilterConfig->FilterActivation));
+  assert_param(IS_CAN_BANKNUMBER(sFilterConfig->BankNumber));
+
+  filternbrbitpos = ((uint32_t)1) << sFilterConfig->FilterNumber;
+
+  /* Initialisation mode for the filter */
+  CAN1->FMR |= (uint32_t)CAN_FMR_FINIT;
+
+  /* Select the start slave bank */
+  CAN1->FMR &= ~((uint32_t)CAN_FMR_CAN2SB);
+  CAN1->FMR |= (uint32_t)(sFilterConfig->BankNumber << 8);
+
+  /* Filter Deactivation */
+  CAN1->FA1R &= ~(uint32_t)filternbrbitpos;
+
+  /* Filter Scale */
+  if (sFilterConfig->FilterScale == CAN_FILTERSCALE_16BIT)
+  {
+    /* 16-bit scale for the filter */
+    CAN1->FS1R &= ~(uint32_t)filternbrbitpos;
+
+    /* First 16-bit identifier and First 16-bit mask */
+    /* Or First 16-bit identifier and Second 16-bit identifier */
+    CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR1 =
+       ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdLow) << 16) |
+        (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdLow);
+
+    /* Second 16-bit identifier and Second 16-bit mask */
+    /* Or Third 16-bit identifier and Fourth 16-bit identifier */
+    CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR2 =
+       ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16) |
+        (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdHigh);
+  }
+
+  if (sFilterConfig->FilterScale == CAN_FILTERSCALE_32BIT)
+  {
+    /* 32-bit scale for the filter */
+    CAN1->FS1R |= filternbrbitpos;
+    /* 32-bit identifier or First 32-bit identifier */
+    CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR1 =
+       ((0x0000FFFF & (uint32_t)sFilterConfig->FilterIdHigh) << 16) |
+        (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdLow);
+    /* 32-bit mask or Second 32-bit identifier */
+    CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR2 =
+       ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16) |
+        (0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdLow);
+  }
+
+  /* Filter Mode */
+  if (sFilterConfig->FilterMode == CAN_FILTERMODE_IDMASK)
+  {
+    /*Id/Mask mode for the filter*/
+    CAN1->FM1R &= ~(uint32_t)filternbrbitpos;
+  }
+  else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */
+  {
+    /*Identifier list mode for the filter*/
+    CAN1->FM1R |= (uint32_t)filternbrbitpos;
+  }
+
+  /* Filter FIFO assignment */
+  if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO0)
+  {
+    /* FIFO 0 assignation for the filter */
+    CAN1->FFA1R &= ~(uint32_t)filternbrbitpos;
+  }
+
+  if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO1)
+  {
+    /* FIFO 1 assignation for the filter */
+    CAN1->FFA1R |= (uint32_t)filternbrbitpos;
+  }
+
+  /* Filter activation */
+  if (sFilterConfig->FilterActivation == ENABLE)
+  {
+    CAN1->FA1R |= filternbrbitpos;
+  }
+
+  /* Leave the initialisation mode for the filter */
+  CAN1->FMR &= ~((uint32_t)CAN_FMR_FINIT);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deinitializes the CANx peripheral registers to their default reset values.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan)
+{
+  /* Check CAN handle */
+  if(hcan == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
+
+  /* Change CAN state */
+  hcan->State = HAL_CAN_STATE_BUSY;
+
+  /* DeInit the low level hardware */
+  HAL_CAN_MspDeInit(hcan);
+
+  /* Change CAN state */
+  hcan->State = HAL_CAN_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hcan);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CAN MSP.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval None
+  */
+__weak void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CAN_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the CAN MSP.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval None
+  */
+__weak void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CAN_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Exported_Functions_Group2 IO operation functions
+ *  @brief    IO operation functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### IO operation functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Transmit a CAN frame message.
+      (+) Receive a CAN frame message.
+      (+) Enter CAN peripheral in sleep mode.
+      (+) Wake up the CAN peripheral from sleep mode.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initiates and transmits a CAN frame message.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout)
+{
+  uint32_t  transmitmailbox = 5;
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
+  assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
+  assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
+
+  /* Process locked */
+  __HAL_LOCK(hcan);
+
+  if(hcan->State == HAL_CAN_STATE_BUSY_RX)
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+  }
+  else
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_TX;
+  }
+
+  /* Select one empty transmit mailbox */
+  if ((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
+  {
+    transmitmailbox = 0;
+  }
+  else if ((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
+  {
+    transmitmailbox = 1;
+  }
+  else if ((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)
+  {
+    transmitmailbox = 2;
+  }
+  else
+  {
+    transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
+  }
+
+  if (transmitmailbox != CAN_TXSTATUS_NOMAILBOX)
+  {
+    /* Set up the Id */
+    hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
+    if (hcan->pTxMsg->IDE == CAN_ID_STD)
+    {
+      assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
+      hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21) | \
+                                                  hcan->pTxMsg->RTR);
+    }
+    else
+    {
+      assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
+      hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3) | \
+                                                  hcan->pTxMsg->IDE | \
+                                                  hcan->pTxMsg->RTR);
+    }
+
+    /* Set up the DLC */
+    hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
+    hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0;
+    hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
+
+    /* Set up the data field */
+    hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3] << 24) |
+                                             ((uint32_t)hcan->pTxMsg->Data[2] << 16) |
+                                             ((uint32_t)hcan->pTxMsg->Data[1] << 8) |
+                                             ((uint32_t)hcan->pTxMsg->Data[0]));
+    hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7] << 24) |
+                                             ((uint32_t)hcan->pTxMsg->Data[6] << 16) |
+                                             ((uint32_t)hcan->pTxMsg->Data[5] << 8) |
+                                             ((uint32_t)hcan->pTxMsg->Data[4]));
+    /* Request transmission */
+    hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+    /* Check End of transmission flag */
+    while(!(__HAL_CAN_TRANSMIT_STATUS(hcan, transmitmailbox)))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+       if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+       {
+         hcan->State = HAL_CAN_STATE_TIMEOUT;
+         /* Process unlocked */
+         __HAL_UNLOCK(hcan);
+         return HAL_TIMEOUT;
+        }
+      }
+    }
+    if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+    {
+      /* Change CAN state */
+      hcan->State = HAL_CAN_STATE_BUSY_RX;
+
+      /* Process unlocked */
+      __HAL_UNLOCK(hcan);
+    }
+    else
+    {
+      /* Change CAN state */
+      hcan->State = HAL_CAN_STATE_READY;
+
+      /* Process unlocked */
+      __HAL_UNLOCK(hcan);
+    }
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_ERROR;
+
+    /* Process unlocked */
+    __HAL_UNLOCK(hcan);
+
+    /* Return function status */
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initiates and transmits a CAN frame message.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
+{
+  uint32_t  transmitmailbox = 5;
+  uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
+  assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
+  assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
+
+  tmp = hcan->State;
+  if((tmp == HAL_CAN_STATE_READY) || (tmp == HAL_CAN_STATE_BUSY_RX))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcan);
+
+    /* Select one empty transmit mailbox */
+    if((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
+    {
+      transmitmailbox = 0;
+    }
+    else if((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
+    {
+      transmitmailbox = 1;
+    }
+    else if((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)
+    {
+      transmitmailbox = 2;
+    }
+    else
+    {
+      transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
+    }
+
+    if(transmitmailbox != CAN_TXSTATUS_NOMAILBOX)
+    {
+      /* Set up the Id */
+      hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
+      if(hcan->pTxMsg->IDE == CAN_ID_STD)
+      {
+        assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
+        hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21) | \
+                                                  hcan->pTxMsg->RTR);
+      }
+      else
+      {
+        assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
+        hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3) | \
+                                                  hcan->pTxMsg->IDE | \
+                                                  hcan->pTxMsg->RTR);
+      }
+
+      /* Set up the DLC */
+      hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
+      hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0;
+      hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
+
+      /* Set up the data field */
+      hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3] << 24) |
+                                             ((uint32_t)hcan->pTxMsg->Data[2] << 16) |
+                                             ((uint32_t)hcan->pTxMsg->Data[1] << 8) |
+                                             ((uint32_t)hcan->pTxMsg->Data[0]));
+      hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7] << 24) |
+                                             ((uint32_t)hcan->pTxMsg->Data[6] << 16) |
+                                             ((uint32_t)hcan->pTxMsg->Data[5] << 8) |
+                                             ((uint32_t)hcan->pTxMsg->Data[4]));
+
+      if(hcan->State == HAL_CAN_STATE_BUSY_RX)
+      {
+        /* Change CAN state */
+        hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+      }
+      else
+      {
+        /* Change CAN state */
+        hcan->State = HAL_CAN_STATE_BUSY_TX;
+      }
+
+      /* Set CAN error code to none */
+      hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcan);
+
+      /* Enable Error warning Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG);
+
+      /* Enable Error passive Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EPV);
+
+      /* Enable Bus-off Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_BOF);
+
+      /* Enable Last error code Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_LEC);
+
+      /* Enable Error Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_ERR);
+
+      /* Enable Transmit mailbox empty Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_TME);
+
+      /* Request transmission */
+      hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Receives a correct CAN frame.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @param  FIFONumber: FIFO Number value
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_CAN_FIFO(FIFONumber));
+
+  /* Process locked */
+  __HAL_LOCK(hcan);
+
+  if(hcan->State == HAL_CAN_STATE_BUSY_TX)
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+  }
+  else
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_RX;
+  }
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check pending message */
+  while(__HAL_CAN_MSG_PENDING(hcan, FIFONumber) == 0)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hcan->State = HAL_CAN_STATE_TIMEOUT;
+        /* Process unlocked */
+        __HAL_UNLOCK(hcan);
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Get the Id */
+  hcan->pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+  if (hcan->pRxMsg->IDE == CAN_ID_STD)
+  {
+    hcan->pRxMsg->StdId = (uint32_t)0x000007FF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21);
+  }
+  else
+  {
+    hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3);
+  }
+
+  hcan->pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+  /* Get the DLC */
+  hcan->pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
+  /* Get the FMI */
+  hcan->pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8);
+  /* Get the data field */
+  hcan->pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
+  hcan->pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8);
+  hcan->pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16);
+  hcan->pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24);
+  hcan->pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
+  hcan->pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8);
+  hcan->pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16);
+  hcan->pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24);
+
+  /* Release the FIFO */
+  if(FIFONumber == CAN_FIFO0)
+  {
+    /* Release FIFO0 */
+    __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
+  }
+  else /* FIFONumber == CAN_FIFO1 */
+  {
+    /* Release FIFO1 */
+    __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
+  }
+
+  if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_TX;
+
+    /* Process unlocked */
+    __HAL_UNLOCK(hcan);
+  }
+  else
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_READY;
+
+    /* Process unlocked */
+    __HAL_UNLOCK(hcan);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Receives a correct CAN frame.
+  * @param  hcan:       Pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @param  FIFONumber: Specify the FIFO number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
+{
+  uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_CAN_FIFO(FIFONumber));
+
+  tmp = hcan->State;
+  if((tmp == HAL_CAN_STATE_READY) || (tmp == HAL_CAN_STATE_BUSY_TX))
+  {
+    /* Process locked */
+    __HAL_LOCK(hcan);
+
+    if(hcan->State == HAL_CAN_STATE_BUSY_TX)
+    {
+      /* Change CAN state */
+      hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      /* Change CAN state */
+      hcan->State = HAL_CAN_STATE_BUSY_RX;
+    }
+
+    /* Set CAN error code to none */
+    hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+
+    /* Enable Error warning Interrupt */
+    __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG);
+
+    /* Enable Error passive Interrupt */
+    __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EPV);
+
+    /* Enable Bus-off Interrupt */
+    __HAL_CAN_ENABLE_IT(hcan, CAN_IT_BOF);
+
+    /* Enable Last error code Interrupt */
+    __HAL_CAN_ENABLE_IT(hcan, CAN_IT_LEC);
+
+    /* Enable Error Interrupt */
+    __HAL_CAN_ENABLE_IT(hcan, CAN_IT_ERR);
+
+    /* Process unlocked */
+    __HAL_UNLOCK(hcan);
+
+    if(FIFONumber == CAN_FIFO0)
+    {
+      /* Enable FIFO 0 message pending Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP0);
+    }
+    else
+    {
+      /* Enable FIFO 1 message pending Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP1);
+    }
+
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enters the Sleep (low power) mode.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef* hcan)
+{
+  uint32_t tickstart = 0;
+
+  /* Process locked */
+  __HAL_LOCK(hcan);
+
+  /* Change CAN state */
+  hcan->State = HAL_CAN_STATE_BUSY;
+
+  /* Request Sleep mode */
+   hcan->Instance->MCR = (((hcan->Instance->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
+
+  /* Sleep mode status */
+  if ((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK)
+  {
+    /* Process unlocked */
+    __HAL_UNLOCK(hcan);
+
+    /* Return function status */
+    return HAL_ERROR;
+  }
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait the acknowledge */
+  while((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK)
+  {
+    if((HAL_GetTick()  - tickstart) > CAN_TIMEOUT_VALUE)
+    {
+      hcan->State = HAL_CAN_STATE_TIMEOUT;
+      /* Process unlocked */
+      __HAL_UNLOCK(hcan);
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Change CAN state */
+  hcan->State = HAL_CAN_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hcan);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Wakes up the CAN peripheral from sleep mode, after that the CAN peripheral
+  *         is in the normal mode.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef* hcan)
+{
+  uint32_t tickstart = 0;
+
+  /* Process locked */
+  __HAL_LOCK(hcan);
+
+  /* Change CAN state */
+  hcan->State = HAL_CAN_STATE_BUSY;
+
+  /* Wake up request */
+  hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_SLEEP;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Sleep mode status */
+  while((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
+  {
+    if((HAL_GetTick()  - tickstart) > CAN_TIMEOUT_VALUE)
+    {
+      hcan->State= HAL_CAN_STATE_TIMEOUT;
+      /* Process unlocked */
+      __HAL_UNLOCK(hcan);
+      return HAL_TIMEOUT;
+    }
+  }
+  if((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
+  {
+    /* Process unlocked */
+    __HAL_UNLOCK(hcan);
+
+    /* Return function status */
+    return HAL_ERROR;
+  }
+
+  /* Change CAN state */
+  hcan->State = HAL_CAN_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hcan);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles CAN interrupt request
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval None
+  */
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan)
+{
+  uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0;
+
+  /* Check End of transmission flag */
+  if(__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_TME))
+  {
+    tmp1 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_0);
+    tmp2 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_1);
+    tmp3 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_2);
+    if(tmp1 || tmp2 || tmp3)
+    {
+      /* Call transmit function */
+      CAN_Transmit_IT(hcan);
+    }
+  }
+
+  tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO0);
+  tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP0);
+  /* Check End of reception flag for FIFO0 */
+  if((tmp1 != 0) && tmp2)
+  {
+    /* Call receive function */
+    CAN_Receive_IT(hcan, CAN_FIFO0);
+  }
+
+  tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO1);
+  tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP1);
+  /* Check End of reception flag for FIFO1 */
+  if((tmp1 != 0) && tmp2)
+  {
+    /* Call receive function */
+    CAN_Receive_IT(hcan, CAN_FIFO1);
+  }
+
+  tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EWG);
+  tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EWG);
+  tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
+  /* Check Error Warning Flag */
+  if(tmp1 && tmp2 && tmp3)
+  {
+    /* Set CAN error code to EWG error */
+    hcan->ErrorCode |= HAL_CAN_ERROR_EWG;
+    /* Clear Error Warning Flag */
+    __HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_EWG);
+  }
+
+  tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EPV);
+  tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EPV);
+  tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
+  /* Check Error Passive Flag */
+  if(tmp1 && tmp2 && tmp3)
+  {
+    /* Set CAN error code to EPV error */
+    hcan->ErrorCode |= HAL_CAN_ERROR_EPV;
+    /* Clear Error Passive Flag */
+    __HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_EPV);
+  }
+
+  tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_BOF);
+  tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_BOF);
+  tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
+  /* Check Bus-Off Flag */
+  if(tmp1 && tmp2 && tmp3)
+  {
+    /* Set CAN error code to BOF error */
+    hcan->ErrorCode |= HAL_CAN_ERROR_BOF;
+    /* Clear Bus-Off Flag */
+    __HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_BOF);
+  }
+
+  tmp1 = HAL_IS_BIT_CLR(hcan->Instance->ESR, CAN_ESR_LEC);
+  tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_LEC);
+  tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
+  /* Check Last error code Flag */
+  if((!tmp1) && tmp2 && tmp3)
+  {
+    tmp1 = (hcan->Instance->ESR) & CAN_ESR_LEC;
+    switch(tmp1)
+    {
+      case(CAN_ESR_LEC_0):
+          /* Set CAN error code to STF error */
+          hcan->ErrorCode |= HAL_CAN_ERROR_STF;
+          break;
+      case(CAN_ESR_LEC_1):
+          /* Set CAN error code to FOR error */
+          hcan->ErrorCode |= HAL_CAN_ERROR_FOR;
+          break;
+      case(CAN_ESR_LEC_1 | CAN_ESR_LEC_0):
+          /* Set CAN error code to ACK error */
+          hcan->ErrorCode |= HAL_CAN_ERROR_ACK;
+          break;
+      case(CAN_ESR_LEC_2):
+          /* Set CAN error code to BR error */
+          hcan->ErrorCode |= HAL_CAN_ERROR_BR;
+          break;
+      case(CAN_ESR_LEC_2 | CAN_ESR_LEC_0):
+          /* Set CAN error code to BD error */
+          hcan->ErrorCode |= HAL_CAN_ERROR_BD;
+          break;
+      case(CAN_ESR_LEC_2 | CAN_ESR_LEC_1):
+          /* Set CAN error code to CRC error */
+          hcan->ErrorCode |= HAL_CAN_ERROR_CRC;
+          break;
+      default:
+          break;
+    }
+
+    /* Clear Last error code Flag */
+    hcan->Instance->ESR &= ~(CAN_ESR_LEC);
+  }
+
+  /* Call the Error call Back in case of Errors */
+  if(hcan->ErrorCode != HAL_CAN_ERROR_NONE)
+  {
+    /* Set the CAN state ready to be able to start again the process */
+    hcan->State = HAL_CAN_STATE_READY;
+    /* Call Error callback function */
+    HAL_CAN_ErrorCallback(hcan);
+  }
+}
+
+/**
+  * @brief  Transmission  complete callback in non blocking mode
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval None
+  */
+__weak void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CAN_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Transmission  complete callback in non blocking mode
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval None
+  */
+__weak void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CAN_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Error CAN callback.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval None
+  */
+__weak void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CAN_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Exported_Functions_Group3 Peripheral State and Error functions
+ *  @brief   CAN Peripheral State functions
+ *
+ at verbatim
+  ==============================================================================
+            ##### Peripheral State and Error functions #####
+  ==============================================================================
+    [..]
+    This subsection provides functions allowing to :
+      (+) Check the CAN state.
+      (+) Check CAN Errors detected during interrupt process
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  return the CAN state
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval HAL state
+  */
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan)
+{
+  /* Return CAN state */
+  return hcan->State;
+}
+
+/**
+  * @brief  Return the CAN error code
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval CAN Error Code
+  */
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan)
+{
+  return hcan->ErrorCode;
+}
+
+/**
+  * @}
+  */
+/**
+  * @brief  Initiates and transmits a CAN frame message.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
+{
+  /* Disable Transmit mailbox empty Interrupt */
+  __HAL_CAN_DISABLE_IT(hcan, CAN_IT_TME);
+
+  if(hcan->State == HAL_CAN_STATE_BUSY_TX)
+  {
+    /* Disable Error warning Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG);
+
+    /* Disable Error passive Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EPV);
+
+    /* Disable Bus-off Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_BOF);
+
+    /* Disable Last error code Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_LEC);
+
+    /* Disable Error Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_ERR);
+  }
+
+  if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_RX;
+  }
+  else
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_READY;
+  }
+
+  /* Transmission complete callback */
+  HAL_CAN_TxCpltCallback(hcan);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Receives a correct CAN frame.
+  * @param  hcan:       Pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @param  FIFONumber: Specify the FIFO number
+  * @retval HAL status
+  * @retval None
+  */
+static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
+{
+  /* Get the Id */
+  hcan->pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+  if (hcan->pRxMsg->IDE == CAN_ID_STD)
+  {
+    hcan->pRxMsg->StdId = (uint32_t)0x000007FF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21);
+  }
+  else
+  {
+    hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3);
+  }
+
+  hcan->pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+  /* Get the DLC */
+  hcan->pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
+  /* Get the FMI */
+  hcan->pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8);
+  /* Get the data field */
+  hcan->pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
+  hcan->pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8);
+  hcan->pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16);
+  hcan->pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24);
+  hcan->pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
+  hcan->pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8);
+  hcan->pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16);
+  hcan->pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24);
+  /* Release the FIFO */
+  /* Release FIFO0 */
+  if (FIFONumber == CAN_FIFO0)
+  {
+    __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
+
+    /* Disable FIFO 0 message pending Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP0);
+  }
+  /* Release FIFO1 */
+  else /* FIFONumber == CAN_FIFO1 */
+  {
+    __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
+
+    /* Disable FIFO 1 message pending Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP1);
+  }
+
+  if(hcan->State == HAL_CAN_STATE_BUSY_RX)
+  {
+    /* Disable Error warning Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG);
+
+    /* Disable Error passive Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EPV);
+
+    /* Disable Bus-off Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_BOF);
+
+    /* Disable Last error code Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_LEC);
+
+    /* Disable Error Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_ERR);
+  }
+
+  if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
+  {
+    /* Disable CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_TX;
+  }
+  else
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_READY;
+  }
+
+  /* Receive complete callback */
+  HAL_CAN_RxCpltCallback(hcan);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#endif /* HAL_CAN_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c
new file mode 100644
index 0000000..005cd00
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c
@@ -0,0 +1,1112 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_cec.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   CEC HAL module driver.
+  *
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the High Definition Multimedia Interface
+  *          Consumer Electronics Control Peripheral (CEC).
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *
+  *
+  @verbatim
+ ===============================================================================
+                        ##### How to use this driver #####
+ ===============================================================================
+    [..]
+    The CEC HAL driver can be used as follow:
+
+    (#) Declare a CEC_HandleTypeDef handle structure.
+    (#) Initialize the CEC low level resources by implementing the HAL_CEC_MspInit ()API:
+        (##) Enable the CEC interface clock.
+        (##) CEC pins configuration:
+            (+) Enable the clock for the CEC GPIOs.
+            (+) Configure these CEC pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_CEC_Transmit_IT()
+             and HAL_CEC_Receive_IT() APIs):
+            (+) Configure the CEC interrupt priority.
+            (+) Enable the NVIC CEC IRQ handle.
+            (@) The specific CEC interrupts (Transmission complete interrupt,
+                RXNE interrupt and Error Interrupts) will be managed using the macros
+                __HAL_CEC_ENABLE_IT() and __HAL_CEC_DISABLE_IT() inside the transmit
+                and receive process.
+
+    (#) Program the Signal Free Time (SFT) and SFT option, Tolerance, reception stop in
+        in case of Bit Rising Error, Error-Bit generation conditions, device logical
+        address and Listen mode in the hcec Init structure.
+
+    (#) Initialize the CEC registers by calling the HAL_CEC_Init() API.
+
+    (@) This API (HAL_CEC_Init()) configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+        by calling the customed HAL_CEC_MspInit() API.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CEC CEC
+  * @brief HAL CEC module driver
+  * @{
+  */
+#ifdef HAL_CEC_MODULE_ENABLED
+
+#if defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+  * @{
+  */
+#define CEC_CFGR_FIELDS     (CEC_CFGR_SFT | CEC_CFGR_RXTOL | CEC_CFGR_BRESTP \
+                           | CEC_CFGR_BREGEN | CEC_CFGR_LBPEGEN | CEC_CFGR_SFTOPT \
+                           | CEC_CFGR_BRDNOGEN | CEC_CFGR_OAR | CEC_CFGR_LSTN)
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+  * @{
+  */
+static HAL_StatusTypeDef CEC_Transmit_IT(CEC_HandleTypeDef *hcec);
+static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec);
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup CEC_Exported_Functions CEC Exported Functions
+  * @{
+  */
+
+/** @defgroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+ at verbatim
+===============================================================================
+            ##### Initialization and Configuration functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to initialize the CEC
+      (+) The following parameters need to be configured:
+        (++) SignalFreeTime
+        (++) Tolerance
+        (++) BRERxStop                 (RX stopped or not upon Bit Rising Error)
+        (++) BREErrorBitGen            (Error-Bit generation in case of Bit Rising Error)
+        (++) LBPEErrorBitGen           (Error-Bit generation in case of Long Bit Period Error)
+        (++) BroadcastMsgNoErrorBitGen (Error-bit generation in case of broadcast message error)
+        (++) SignalFreeTimeOption      (SFT Timer start definition)
+        (++) OwnAddress                (CEC device address)
+        (++) ListenMode
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief Initializes the CEC mode according to the specified
+  *         parameters in the CEC_InitTypeDef and creates the associated handle .
+  * @param hcec: CEC handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec)
+{
+  uint32_t tmpreg = 0x0;
+
+  /* Check the CEC handle allocation */
+  if(hcec == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
+  assert_param(IS_CEC_SIGNALFREETIME(hcec->Init.SignalFreeTime));
+  assert_param(IS_CEC_TOLERANCE(hcec->Init.Tolerance));
+  assert_param(IS_CEC_BRERXSTOP(hcec->Init.BRERxStop));
+  assert_param(IS_CEC_BREERRORBITGEN(hcec->Init.BREErrorBitGen));
+  assert_param(IS_CEC_LBPEERRORBITGEN(hcec->Init.LBPEErrorBitGen));
+  assert_param(IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(hcec->Init.BroadcastMsgNoErrorBitGen));
+  assert_param(IS_CEC_SFTOP(hcec->Init.SignalFreeTimeOption));
+  assert_param(IS_CEC_OAR_ADDRESS(hcec->Init.OwnAddress));
+  assert_param(IS_CEC_LISTENING_MODE(hcec->Init.ListenMode));
+  assert_param(IS_CEC_ADDRESS(hcec->Init.InitiatorAddress));
+
+
+  if(hcec->State == HAL_CEC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hcec->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK */
+    HAL_CEC_MspInit(hcec);
+  }
+
+  hcec->State = HAL_CEC_STATE_BUSY;
+
+  /* Disable the Peripheral */
+  __HAL_CEC_DISABLE(hcec);
+
+  tmpreg = hcec->Init.SignalFreeTime;
+  tmpreg |= hcec->Init.Tolerance;
+  tmpreg |= hcec->Init.BRERxStop;
+  tmpreg |= hcec->Init.BREErrorBitGen;
+  tmpreg |= hcec->Init.LBPEErrorBitGen;
+  tmpreg |= hcec->Init.BroadcastMsgNoErrorBitGen;
+  tmpreg |= hcec->Init.SignalFreeTimeOption;
+  tmpreg |= (hcec->Init.OwnAddress << CEC_CFGR_OAR_LSB_POS);
+  tmpreg |= hcec->Init.ListenMode;
+
+  /* Write to CEC Control Register */
+  MODIFY_REG(hcec->Instance->CFGR, CEC_CFGR_FIELDS, tmpreg);
+
+  /* Enable the Peripheral */
+  __HAL_CEC_ENABLE(hcec);
+
+  hcec->State = HAL_CEC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief DeInitializes the CEC peripheral
+  * @param hcec: CEC handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec)
+{
+  /* Check the CEC handle allocation */
+  if(hcec == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
+
+  hcec->State = HAL_CEC_STATE_BUSY;
+
+  /* DeInit the low level hardware */
+  HAL_CEC_MspDeInit(hcec);
+  /* Disable the Peripheral */
+  __HAL_CEC_DISABLE(hcec);
+
+  hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+  hcec->State = HAL_CEC_STATE_RESET;
+
+  /* Process Unlock */
+  __HAL_UNLOCK(hcec);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief CEC MSP Init
+  * @param hcec: CEC handle
+  * @retval None
+  */
+ __weak void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_CEC_MspInit can be implemented in the user file
+   */
+}
+
+/**
+  * @brief CEC MSP DeInit
+  * @param hcec: CEC handle
+  * @retval None
+  */
+ __weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_CEC_MspDeInit can be implemented in the user file
+   */
+}
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Exported_Functions_Group2 Input and Output operation functions
+  *  @brief CEC Transmit/Receive functions
+  *
+ at verbatim
+ ===============================================================================
+                      ##### I/O operation functions #####
+ ===============================================================================
+    This subsection provides a set of functions allowing to manage the CEC data transfers.
+
+    (#) The CEC handle must contain the initiator (TX side) and the destination (RX side)
+        logical addresses (4-bit long addresses, 0xF for broadcast messages destination)
+
+    (#) There are two mode of transfer:
+       (+) Blocking mode: The communication is performed in polling mode.
+            The HAL status of all data processing is returned by the same function
+            after finishing transfer.
+       (+) No-Blocking mode: The communication is performed using Interrupts.
+           These API's return the HAL status.
+           The end of the data processing will be indicated through the
+           dedicated CEC IRQ when using Interrupt mode.
+           The HAL_CEC_TxCpltCallback(), HAL_CEC_RxCpltCallback() user callbacks
+           will be executed respectivelly at the end of the transmit or Receive process
+           The HAL_CEC_ErrorCallback()user callback will be executed when a communication
+           error is detected
+
+    (#) Blocking mode API's are :
+        (+) HAL_CEC_Transmit()
+        (+) HAL_CEC_Receive()
+
+    (#) Non-Blocking mode API's with Interrupt are :
+        (+) HAL_CEC_Transmit_IT()
+        (+) HAL_CEC_Receive_IT()
+        (+) HAL_CEC_IRQHandler()
+
+    (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+        (+) HAL_CEC_TxCpltCallback()
+        (+) HAL_CEC_RxCpltCallback()
+        (+) HAL_CEC_ErrorCallback()
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief Send data in blocking mode
+  * @param hcec: CEC handle
+  * @param DestinationAddress: destination logical address
+  * @param pData: pointer to input byte data buffer
+  * @param Size: amount of data to be sent in bytes (without counting the header).
+  *              0 means only the header is sent (ping operation).
+  *              Maximum TX size is 15 bytes (1 opcode and up to 14 operands).
+  * @param  Timeout: Timeout duration.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout)
+{
+ uint8_t  temp = 0;
+  uint32_t tempisr = 0;
+  uint32_t tickstart = 0;
+
+  if((hcec->State == HAL_CEC_STATE_READY) && (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) == RESET))
+  {
+    hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+    if((pData == NULL ) && (Size > 0))
+    {
+      hcec->State = HAL_CEC_STATE_ERROR;
+      return  HAL_ERROR;
+    }
+
+    assert_param(IS_CEC_ADDRESS(DestinationAddress));
+    assert_param(IS_CEC_MSGSIZE(Size));
+
+    /* Process Locked */
+    __HAL_LOCK(hcec);
+
+    hcec->State = HAL_CEC_STATE_BUSY_TX;
+
+    hcec->TxXferCount = Size;
+
+    /* case no data to be sent, sender is only pinging the system */
+    if (Size == 0)
+    {
+      /* Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */
+      __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+    }
+
+    /* send header block */
+    temp = ((uint32_t)hcec->Init.InitiatorAddress << CEC_INITIATOR_LSB_POS) | DestinationAddress;
+    hcec->Instance->TXDR = temp;
+    /* Set TX Start of Message  (TXSOM) bit */
+    __HAL_CEC_FIRST_BYTE_TX_SET(hcec);
+
+    while (hcec->TxXferCount > 0)
+    {
+      hcec->TxXferCount--;
+
+      tickstart = HAL_GetTick();
+      while(HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_FLAG_TXBR))
+      {
+      	if(Timeout != HAL_MAX_DELAY)
+        {
+          if((HAL_GetTick() - tickstart) > Timeout)
+          {
+            hcec->State = HAL_CEC_STATE_TIMEOUT;
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcec);
+            return HAL_TIMEOUT;
+          }
+        }
+
+        /* check whether error occured while waiting for TXBR to be set:
+         * has Tx underrun occurred ?
+         * has Tx error occurred ?
+         * has Tx Missing Acknowledge error occurred ?
+         * has Arbitration Loss error occurred ? */
+        tempisr = hcec->Instance->ISR;
+        if ((tempisr & (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE|CEC_FLAG_ARBLST)) != 0)
+        {
+          /* copy ISR for error handling purposes */
+          hcec->ErrorCode = tempisr;
+         /* clear all error flags by default */
+         __HAL_CEC_CLEAR_FLAG(hcec, (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE|CEC_FLAG_ARBLST));
+         hcec->State = HAL_CEC_STATE_ERROR;
+         __HAL_UNLOCK(hcec);
+         return  HAL_ERROR;
+        }
+      }
+      /* TXBR to clear BEFORE writing TXDR register */
+      __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR);
+      if (hcec->TxXferCount == 0)
+      {
+        /* if last byte transmission, set TX End of Message (TXEOM) bit */
+        __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+      }
+      hcec->Instance->TXDR = *pData++;
+
+      /* error check after TX byte write up */
+      tempisr = hcec->Instance->ISR;
+      if ((tempisr & (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE|CEC_FLAG_ARBLST)) != 0)
+      {
+        /* copy ISR for error handling purposes */
+        hcec->ErrorCode = tempisr;
+        /* clear all error flags by default */
+        __HAL_CEC_CLEAR_FLAG(hcec, (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE|CEC_FLAG_ARBLST));
+        hcec->State = HAL_CEC_STATE_ERROR;
+        __HAL_UNLOCK(hcec);
+        return  HAL_ERROR;
+      }
+    } /* end while (while (hcec->TxXferCount > 0)) */
+
+
+    /* if no error up to this point, check that transmission is
+     * complete, that is wait until TXEOM is reset */
+    tickstart = HAL_GetTick();
+
+    while (HAL_IS_BIT_SET(hcec->Instance->CR, CEC_CR_TXEOM))
+    {
+    	if(Timeout != HAL_MAX_DELAY)
+      {
+        if((HAL_GetTick() - tickstart) > Timeout)
+        {
+          hcec->State = HAL_CEC_STATE_ERROR;
+          __HAL_UNLOCK(hcec);
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Final error check once all bytes have been transmitted */
+    tempisr = hcec->Instance->ISR;
+    if ((tempisr & (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE)) != 0)
+    {
+      /* copy ISR for error handling purposes */
+      hcec->ErrorCode = tempisr;
+      /* clear all error flags by default */
+      __HAL_CEC_CLEAR_FLAG(hcec, (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE));
+      hcec->State = HAL_CEC_STATE_ERROR;
+      __HAL_UNLOCK(hcec);
+      return  HAL_ERROR;
+    }
+
+    hcec->State = HAL_CEC_STATE_READY;
+    __HAL_UNLOCK(hcec);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive data in blocking mode. Must be invoked when RXBR has been set.
+  * @param hcec: CEC handle
+  * @param pData: pointer to received data buffer.
+  * @param Timeout: Timeout duration.
+  *       Note that the received data size is not known beforehand, the latter is known
+  *       when the reception is complete and is stored in hcec->RxXferSize.
+  *       hcec->RxXferSize is the sum of opcodes + operands (0 to 14 operands max).
+  *       If only a header is received, hcec->RxXferSize = 0
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout)
+{
+  uint32_t temp;
+  uint32_t tickstart = 0;
+
+  if (hcec->State == HAL_CEC_STATE_READY)
+  {
+    hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+    if (pData == NULL )
+    {
+      hcec->State = HAL_CEC_STATE_ERROR;
+      return  HAL_ERROR;
+    }
+
+    hcec->RxXferSize = 0;
+    /* Process Locked */
+    __HAL_LOCK(hcec);
+
+
+    /* Rx loop until CEC_ISR_RXEND  is set */
+    while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_FLAG_RXEND))
+    {
+      tickstart = HAL_GetTick();
+      /* Wait for next byte to be received */
+      while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_FLAG_RXBR))
+      {
+    	  if(Timeout != HAL_MAX_DELAY)
+        {
+          if((HAL_GetTick() - tickstart) > Timeout)
+          {
+            hcec->State = HAL_CEC_STATE_TIMEOUT;
+            __HAL_UNLOCK(hcec);
+            return HAL_TIMEOUT;
+          }
+        }
+        /* any error so far ?
+         * has Rx Missing Acknowledge occurred ?
+         * has Rx Long Bit Period error occurred ?
+         * has Rx Short Bit Period error occurred ?
+         * has Rx Bit Rising error occurred ?
+         * has Rx Overrun error occurred ? */
+        temp = (uint32_t) (hcec->Instance->ISR);
+        if ((temp & (CEC_FLAG_RXACKE|CEC_FLAG_LBPE|CEC_FLAG_SBPE|CEC_FLAG_BRE|CEC_FLAG_RXOVR)) != 0)
+        {
+          /* copy ISR for error handling purposes */
+          hcec->ErrorCode = temp;
+          /* clear all error flags by default */
+          __HAL_CEC_CLEAR_FLAG(hcec,(CEC_FLAG_RXACKE|CEC_FLAG_LBPE|CEC_FLAG_SBPE|CEC_FLAG_BRE|CEC_FLAG_RXOVR));
+          hcec->State = HAL_CEC_STATE_ERROR;
+          __HAL_UNLOCK(hcec);
+          return  HAL_ERROR;
+        }
+      } /* while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXBR)) */
+
+
+      /* read received data */
+      *pData++ = hcec->Instance->RXDR;
+      temp = (uint32_t) (hcec->Instance->ISR);
+      /* end of message ? */
+      if ((temp &  CEC_ISR_RXEND) != 0)
+      {
+         assert_param(IS_CEC_MSGSIZE(hcec->RxXferSize));
+         __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_RXEND);
+          hcec->State = HAL_CEC_STATE_READY;
+         __HAL_UNLOCK(hcec);
+         return HAL_OK;
+      }
+
+      /* clear Rx-Byte Received flag */
+      __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_RXBR);
+      /* increment payload byte counter */
+       hcec->RxXferSize++;
+    } /* while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXEND)) */
+
+    /* if the instructions below are executed, it means RXEND was set when RXBR was
+     * set for the first time:
+     * the code within the "while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXEND))"
+     * loop has not been executed and this means a single byte has been sent */
+    *pData++ = hcec->Instance->RXDR;
+     /* only one header is received: RxXferSize is set to 0 (no operand, no opcode) */
+     hcec->RxXferSize = 0;
+     __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXEND);
+
+    hcec->State = HAL_CEC_STATE_READY;
+    __HAL_UNLOCK(hcec);
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Send data in interrupt mode
+  * @param hcec: CEC handle
+  * @param DestinationAddress: destination logical address
+  * @param pData: pointer to input byte data buffer
+  * @param Size: amount of data to be sent in bytes (without counting the header).
+  *              0 means only the header is sent (ping operation).
+  *              Maximum TX size is 15 bytes (1 opcode and up to 14 operands).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size)
+{
+  uint8_t  temp = 0;
+  /* if the IP isn't already busy and if there is no previous transmission
+     already pending due to arbitration lost */
+  if (((hcec->State == HAL_CEC_STATE_READY) || (hcec->State == HAL_CEC_STATE_STANDBY_RX))
+  &&   (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) == RESET))
+  {
+    if((pData == NULL) && (Size > 0))
+    {
+      hcec->State = HAL_CEC_STATE_ERROR;
+      return  HAL_ERROR;
+    }
+
+    assert_param(IS_CEC_ADDRESS(DestinationAddress));
+    assert_param(IS_CEC_MSGSIZE(Size));
+
+    /* Process Locked */
+    __HAL_LOCK(hcec);
+    hcec->pTxBuffPtr = pData;
+    hcec->State = HAL_CEC_STATE_BUSY_TX;
+    hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+
+    /* Disable Peripheral to write CEC_IER register */
+    __HAL_CEC_DISABLE(hcec);
+
+    /* Enable the following two CEC Transmission interrupts as
+     * well as the following CEC Transmission Errors interrupts:
+     * Tx Byte Request IT
+     * End of Transmission IT
+     * Tx Missing Acknowledge IT
+     * Tx-Error IT
+     * Tx-Buffer Underrun IT
+     * Tx arbitration lost     */
+    __HAL_CEC_ENABLE_IT(hcec, CEC_IT_TXBR|CEC_IT_TXEND|CEC_IER_TX_ALL_ERR);
+
+    /* Enable the Peripheral */
+    __HAL_CEC_ENABLE(hcec);
+
+    /* initialize the number of bytes to send,
+     * 0 means only one header is sent (ping operation) */
+    hcec->TxXferCount = Size;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcec);
+
+    /* in case of no payload (Size = 0), sender is only pinging the system;
+     * Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */
+    if (Size == 0)
+    {
+      __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+    }
+
+    /* send header block */
+    temp = (uint8_t)((uint32_t)(hcec->Init.InitiatorAddress) << CEC_INITIATOR_LSB_POS) | DestinationAddress;
+    hcec->Instance->TXDR = temp;
+    /* Set TX Start of Message  (TXSOM) bit */
+    __HAL_CEC_FIRST_BYTE_TX_SET(hcec);
+
+    return HAL_OK;
+  }
+    /* if the IP is already busy or if there is a previous transmission
+     already pending due to arbitration loss */
+  else if ((hcec->State == HAL_CEC_STATE_BUSY_TX)
+        || (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) != RESET))
+  {
+    __HAL_LOCK(hcec);
+    /* set state to BUSY TX, in case it wasn't set already (case
+     * of transmission new attempt after arbitration loss) */
+    if (hcec->State != HAL_CEC_STATE_BUSY_TX)
+    {
+      hcec->State = HAL_CEC_STATE_BUSY_TX;
+    }
+
+    /* if all data have been sent */
+    if(hcec->TxXferCount == 0)
+    {
+      /* Disable Peripheral to write CEC_IER register */
+      __HAL_CEC_DISABLE(hcec);
+
+      /* Disable the CEC Transmission Interrupts */
+      __HAL_CEC_DISABLE_IT(hcec, CEC_IT_TXBR|CEC_IT_TXEND);
+      /* Disable the CEC Transmission Error Interrupts */
+      __HAL_CEC_DISABLE_IT(hcec, CEC_IER_TX_ALL_ERR);
+
+      /* Enable the Peripheral */
+      __HAL_CEC_ENABLE(hcec);
+
+      __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR|CEC_FLAG_TXEND);
+
+      hcec->State = HAL_CEC_STATE_READY;
+      /* Call the Process Unlocked before calling the Tx call back API to give the possibility to
+      start again the Transmission under the Tx call back API */
+      __HAL_UNLOCK(hcec);
+
+      HAL_CEC_TxCpltCallback(hcec);
+
+      return HAL_OK;
+    }
+    else
+    {
+      if (hcec->TxXferCount == 1)
+      {
+        /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
+        __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+      }
+      /* clear Tx-Byte request flag */
+       __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR);
+       hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
+      hcec->TxXferCount--;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcec);
+
+      return HAL_OK;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive data in interrupt mode.
+  * @param hcec: CEC handle
+  * @param pData: pointer to received data buffer.
+  * Note that the received data size is not known beforehand, the latter is known
+  * when the reception is complete and is stored in hcec->RxXferSize.
+  * hcec->RxXferSize is the sum of opcodes + operands (0 to 14 operands max).
+  * If only a header is received, hcec->RxXferSize = 0
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData)
+{
+  if(hcec->State == HAL_CEC_STATE_READY)
+  {
+    if(pData == NULL)
+    {
+      hcec->State = HAL_CEC_STATE_ERROR;
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hcec);
+    hcec->RxXferSize = 0;
+    hcec->pRxBuffPtr = pData;
+    hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+    /* the IP is moving to a ready to receive state */
+    hcec->State = HAL_CEC_STATE_STANDBY_RX;
+
+    /* Disable Peripheral to write CEC_IER register */
+    __HAL_CEC_DISABLE(hcec);
+
+    /* Enable the following CEC Reception Error Interrupts:
+     * Rx overrun
+     * Rx bit rising error
+     * Rx short bit period error
+     * Rx long bit period error
+     * Rx missing acknowledge  */
+    __HAL_CEC_ENABLE_IT(hcec, CEC_IER_RX_ALL_ERR);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcec);
+
+    /* Enable the following two CEC Reception interrupts:
+     * Rx Byte Received IT
+     * End of Reception IT */
+    __HAL_CEC_ENABLE_IT(hcec, CEC_IT_RXBR|CEC_IT_RXEND);
+
+    __HAL_CEC_ENABLE(hcec);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Get size of the received frame.
+  * @param hcec: CEC handle
+  * @retval Frame size
+  */
+uint32_t HAL_CEC_GetReceivedFrameSize(CEC_HandleTypeDef *hcec)
+{
+  return hcec->RxXferSize;
+}
+
+/**
+  * @brief This function handles CEC interrupt requests.
+  * @param hcec: CEC handle
+  * @retval None
+  */
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec)
+{
+  /* save interrupts register for further error or interrupts handling purposes */
+  hcec->ErrorCode = hcec->Instance->ISR;
+  /* CEC TX missing acknowledge error interrupt occurred -------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXACKE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXACKE) != RESET))
+  {
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXACKE);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+
+  /* CEC transmit error interrupt occured --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXERR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXERR) != RESET))
+  {
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXERR);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+
+  /* CEC TX underrun error interrupt occured --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXUDR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXUDR) != RESET))
+  {
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXUDR);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+
+  /* CEC TX arbitration error interrupt occured --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_ARBLST) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_ARBLST) != RESET))
+  {
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_ARBLST);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+
+  /* CEC RX overrun error interrupt occured --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RXOVR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_RXOVR) != RESET))
+  {
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXOVR);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+
+  /* CEC RX bit rising error interrupt occured --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_BRE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_BRE) != RESET))
+  {
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_BRE);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+
+  /* CEC RX short bit period error interrupt occured --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_SBPE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_SBPE) != RESET))
+  {
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_SBPE);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+
+  /* CEC RX long bit period error interrupt occured --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_LBPE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_LBPE) != RESET))
+  {
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_LBPE);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+
+  /* CEC RX missing acknowledge error interrupt occured --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RXACKE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_RXACKE) != RESET))
+  {
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXACKE);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+
+  if ((hcec->ErrorCode & CEC_ISR_ALL_ERROR) != 0)
+  {
+    HAL_CEC_ErrorCallback(hcec);
+  }
+
+  /* CEC RX byte received interrupt  ---------------------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RXBR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_RXBR) != RESET))
+  {
+    /* RXBR IT is cleared during HAL_CEC_Transmit_IT processing */
+    CEC_Receive_IT(hcec);
+  }
+
+  /* CEC RX end received interrupt  ---------------------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RXEND) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_RXEND) != RESET))
+  {
+    /* RXBR IT is cleared during HAL_CEC_Transmit_IT processing */
+    CEC_Receive_IT(hcec);
+  }
+
+
+  /* CEC TX byte request interrupt ------------------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXBR) != RESET) &&(__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXBR) != RESET))
+  {
+    /* TXBR IT is cleared during HAL_CEC_Transmit_IT processing */
+    CEC_Transmit_IT(hcec);
+  }
+
+  /* CEC TX end interrupt ------------------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXEND) != RESET) &&(__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXEND) != RESET))
+  {
+   /* TXEND IT is cleared during HAL_CEC_Transmit_IT processing */
+    CEC_Transmit_IT(hcec);
+  }
+}
+
+/**
+  * @brief Tx Transfer completed callback
+  * @param hcec: CEC handle
+  * @retval None
+  */
+ __weak void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_CEC_TxCpltCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer completed callback
+  * @param hcec: CEC handle
+  * @retval None
+  */
+__weak void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_CEC_TxCpltCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @brief CEC error callbacks
+  * @param hcec: CEC handle
+  * @retval None
+  */
+ __weak void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_CEC_ErrorCallback can be implemented in the user file
+   */
+}
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control function
+  *  @brief   CEC control functions
+  *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral Control function #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the CEC.
+     (+) HAL_CEC_GetState() API can be helpful to check in run-time the state of the CEC peripheral.
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief return the CEC state
+  * @param hcec: CEC handle
+  * @retval HAL state
+  */
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec)
+{
+  return hcec->State;
+}
+
+/**
+* @brief  Return the CEC error code
+* @param  hcec : pointer to a CEC_HandleTypeDef structure that contains
+  *              the configuration information for the specified CEC.
+* @retval CEC Error Code
+*/
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec)
+{
+  return hcec->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief Send data in interrupt mode
+  * @param hcec: CEC handle.
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_CEC_Transmit_IT()
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef CEC_Transmit_IT(CEC_HandleTypeDef *hcec)
+{
+  /* if the IP is already busy or if there is a previous transmission
+     already pending due to arbitration loss */
+  if ((hcec->State == HAL_CEC_STATE_BUSY_TX)
+        || (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) != RESET))
+  {
+    __HAL_LOCK(hcec);
+    /* set state to BUSY TX, in case it wasn't set already (case
+     * of transmission new attempt after arbitration loss) */
+    if (hcec->State != HAL_CEC_STATE_BUSY_TX)
+    {
+      hcec->State = HAL_CEC_STATE_BUSY_TX;
+    }
+
+    /* if all data have been sent */
+    if(hcec->TxXferCount == 0)
+    {
+      /* Disable Peripheral to write CEC_IER register */
+      __HAL_CEC_DISABLE(hcec);
+
+      /* Disable the CEC Transmission Interrupts */
+      __HAL_CEC_DISABLE_IT(hcec, CEC_IT_TXBR|CEC_IT_TXEND);
+      /* Disable the CEC Transmission Error Interrupts */
+      __HAL_CEC_DISABLE_IT(hcec, CEC_IER_TX_ALL_ERR);
+
+      /* Enable the Peripheral */
+      __HAL_CEC_ENABLE(hcec);
+
+       __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_TXBR|CEC_FLAG_TXEND);
+
+      hcec->State = HAL_CEC_STATE_READY;
+      /* Call the Process Unlocked before calling the Tx call back API to give the possibility to
+      start again the Transmission under the Tx call back API */
+      __HAL_UNLOCK(hcec);
+
+      HAL_CEC_TxCpltCallback(hcec);
+
+      return HAL_OK;
+    }
+    else
+    {
+      if (hcec->TxXferCount == 1)
+      {
+        /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
+        __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+      }
+      /* clear Tx-Byte request flag */
+       __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_TXBR);
+       hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
+      hcec->TxXferCount--;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcec);
+
+      return HAL_OK;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+
+/**
+  * @brief Receive data in interrupt mode.
+  * @param hcec: CEC handle.
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_CEC_Receive_IT()
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec)
+{
+  uint32_t tempisr;
+
+  /* Three different conditions are tested to carry out the RX IT processing:
+   * - the IP is in reception stand-by (the IP state is HAL_CEC_STATE_STANDBY_RX) and
+   *   the reception of the first byte is starting
+   * - a message reception is already on-going (the IP state is HAL_CEC_STATE_BUSY_RX)
+   *   and a new byte is being received
+   * - a transmission has just been started (the IP state is HAL_CEC_STATE_BUSY_TX)
+   *   but has been interrupted by a new message reception or discarded due to
+   *   arbitration loss: the reception of the first or higher priority message
+   *   (the arbitration winner) is starting */
+  if ((hcec->State == HAL_CEC_STATE_STANDBY_RX)
+  ||  (hcec->State == HAL_CEC_STATE_BUSY_RX)
+  ||  (hcec->State == HAL_CEC_STATE_BUSY_TX))
+  {
+    /* reception is starting */
+    hcec->State = HAL_CEC_STATE_BUSY_RX;
+    tempisr =  (uint32_t) (hcec->Instance->ISR);
+    if ((tempisr & CEC_FLAG_RXBR) != 0)
+    {
+      /* Process Locked */
+      __HAL_LOCK(hcec);
+      /* read received byte */
+      *hcec->pRxBuffPtr++ = hcec->Instance->RXDR;
+      /* if last byte has been received */
+      if ((tempisr & CEC_FLAG_RXEND) != 0)
+      {
+        /* clear IT */
+        __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_RXBR|CEC_FLAG_RXEND);
+        /* RX interrupts are not disabled at this point.
+         * Indeed, to disable the IT, the IP must be disabled first
+         * which resets the TXSOM flag. In case of arbitration loss,
+         * this leads to a transmission abort.
+         * Therefore, RX interruptions disabling if so required,
+         * is done in HAL_CEC_RxCpltCallback */
+
+        /* IP state is moved to READY.
+         * If the IP must remain in standby mode to listen
+         * any new message, it is up to HAL_CEC_RxCpltCallback
+         * to move it again to HAL_CEC_STATE_STANDBY_RX */
+        hcec->State = HAL_CEC_STATE_READY;
+
+        /* Call the Process Unlocked before calling the Rx call back API */
+        __HAL_UNLOCK(hcec);
+        HAL_CEC_RxCpltCallback(hcec);
+
+        return HAL_OK;
+      }
+      __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR);
+
+      hcec->RxXferSize++;
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcec);
+
+      return HAL_OK;
+    }
+    else
+    {
+      return HAL_BUSY;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @}
+  */
+
+#endif /* STM32F446xx */
+
+#endif /* HAL_CEC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c
new file mode 100644
index 0000000..b796be8
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c
@@ -0,0 +1,436 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_cortex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   CORTEX HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the CORTEX:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+
+    [..]
+    *** How to configure Interrupts using CORTEX HAL driver ***
+    ===========================================================
+    [..]
+    This section provides functions allowing to configure the NVIC interrupts (IRQ).
+    The Cortex-M4 exceptions are managed by CMSIS functions.
+
+    (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping()
+        function according to the following table.
+    (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority().
+    (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ().
+    (#) please refer to programing manual for details in how to configure priority.
+
+     - at - When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible.
+         The pending IRQ priority will be managed only by the sub priority.
+
+     - at - IRQ priority order (sorted by highest to lowest priority):
+        (+@) Lowest preemption priority
+        (+@) Lowest sub priority
+        (+@) Lowest hardware priority (IRQ number)
+
+    [..]
+    *** How to configure Systick using CORTEX HAL driver ***
+    ========================================================
+    [..]
+    Setup SysTick Timer for time base.
+
+   (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which
+       is a CMSIS function that:
+        (++) Configures the SysTick Reload register with value passed as function parameter.
+        (++) Configures the SysTick IRQ priority to the lowest value (0x0F).
+        (++) Resets the SysTick Counter register.
+        (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+        (++) Enables the SysTick Interrupt.
+        (++) Starts the SysTick Counter.
+
+   (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
+       __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
+       HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
+       inside the stm32f4xx_hal_cortex.h file.
+
+   (+) You can change the SysTick IRQ priority by calling the
+       HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
+       call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+   (+) To adjust the SysTick time base, use the following formula:
+
+       Reload Value = SysTick Counter Clock (Hz) x  Desired Time base (s)
+       (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+       (++) Reload Value should not exceed 0xFFFFFF
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CORTEX CORTEX
+  * @brief CORTEX HAL module driver
+  * @{
+  */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
+  * @{
+  */
+
+
+/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]
+      This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+      Systick functionalities
+
+ at endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Sets the priority grouping field (preemption priority and subpriority)
+  *         using the required unlock sequence.
+  * @param  PriorityGroup: The priority grouping bits length.
+  *         This parameter can be one of the following values:
+  *         @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+  *                                    4 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+  *                                    3 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+  *                                    2 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+  *                                    1 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+  *                                    0 bits for subpriority
+  * @note   When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible.
+  *         The pending IRQ priority will be managed only by the subpriority.
+  * @retval None
+  */
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+
+  /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
+  NVIC_SetPriorityGrouping(PriorityGroup);
+}
+
+/**
+  * @brief  Sets the priority of an interrupt.
+  * @param  IRQn: External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @param  PreemptPriority: The preemption priority for the IRQn channel.
+  *         This parameter can be a value between 0 and 15
+  *         A lower priority value indicates a higher priority
+  * @param  SubPriority: the subpriority level for the IRQ channel.
+  *         This parameter can be a value between 0 and 15
+  *         A lower priority value indicates a higher priority.
+  * @retval None
+  */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t prioritygroup = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
+  assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+
+  prioritygroup = NVIC_GetPriorityGrouping();
+
+  NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
+}
+
+/**
+  * @brief  Enables a device specific interrupt in the NVIC interrupt controller.
+  * @note   To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+  *         function should be called before.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+  /* Enable interrupt */
+  NVIC_EnableIRQ(IRQn);
+}
+
+/**
+  * @brief  Disables a device specific interrupt in the NVIC interrupt controller.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+  /* Disable interrupt */
+  NVIC_DisableIRQ(IRQn);
+}
+
+/**
+  * @brief  Initiates a system reset request to reset the MCU.
+  * @retval None
+  */
+void HAL_NVIC_SystemReset(void)
+{
+  /* System Reset */
+  NVIC_SystemReset();
+}
+
+/**
+  * @brief  Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+  *         Counter is in free running mode to generate periodic interrupts.
+  * @param  TicksNumb: Specifies the ticks Number of ticks between two interrupts.
+  * @retval status:  - 0  Function succeeded.
+  *                  - 1  Function failed.
+  */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+   return SysTick_Config(TicksNumb);
+}
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ *  @brief   Cortex control functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### Peripheral Control functions #####
+  ==============================================================================
+    [..]
+      This subsection provides a set of functions allowing to control the CORTEX
+      (NVIC, SYSTICK) functionalities.
+
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Gets the priority grouping field from the NVIC Interrupt Controller.
+  * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
+  */
+uint32_t HAL_NVIC_GetPriorityGrouping(void)
+{
+  /* Get the PRIGROUP[10:8] field value */
+  return NVIC_GetPriorityGrouping();
+}
+
+/**
+  * @brief  Gets the priority of an interrupt.
+  * @param  IRQn: External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @param   PriorityGroup: the priority grouping bits length.
+  *         This parameter can be one of the following values:
+  *           @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+  *                                      4 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+  *                                      3 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+  *                                      2 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+  *                                      1 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+  *                                      0 bits for subpriority
+  * @param  pPreemptPriority: Pointer on the Preemptive priority value (starting from 0).
+  * @param  pSubPriority: Pointer on the Subpriority value (starting from 0).
+  * @retval None
+  */
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+ /* Get priority for Cortex-M system or device specific interrupts */
+  NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
+}
+
+/**
+  * @brief  Sets Pending bit of an external interrupt.
+  * @param  IRQn External interrupt number
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+  /* Set interrupt pending */
+  NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Gets Pending Interrupt (reads the pending register in the NVIC
+  *         and returns the pending bit for the specified interrupt).
+  * @param  IRQn External interrupt number.
+  *          This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @retval status: - 0  Interrupt status is not pending.
+  *                 - 1  Interrupt status is pending.
+  */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+  /* Return 1 if pending else 0 */
+  return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Clears the pending bit of an external interrupt.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+  /* Clear pending interrupt */
+  NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+  * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
+  * @param IRQn External interrupt number
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @retval status: - 0  Interrupt status is not pending.
+  *                 - 1  Interrupt status is pending.
+  */
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+  /* Return 1 if active else 0 */
+  return NVIC_GetActive(IRQn);
+}
+
+/**
+  * @brief  Configures the SysTick clock source.
+  * @param  CLKSource: specifies the SysTick clock source.
+  *          This parameter can be one of the following values:
+  *             @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+  *             @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+  * @retval None
+  */
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
+  if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
+  {
+    SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+  }
+  else
+  {
+    SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
+  }
+}
+
+/**
+  * @brief  This function handles SYSTICK interrupt request.
+  * @retval None
+  */
+void HAL_SYSTICK_IRQHandler(void)
+{
+  HAL_SYSTICK_Callback();
+}
+
+/**
+  * @brief  SYSTICK callback.
+  * @retval None
+  */
+__weak void HAL_SYSTICK_Callback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SYSTICK_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c
new file mode 100644
index 0000000..b1a65c4
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c
@@ -0,0 +1,342 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_crc.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   CRC HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Cyclic Redundancy Check (CRC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The CRC HAL driver can be used as follows:
+
+      (#) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE();
+
+      (#) Use HAL_CRC_Accumulate() function to compute the CRC value of
+          a 32-bit data buffer using combination of the previous CRC value
+          and the new one.
+
+      (#) Use HAL_CRC_Calculate() function to compute the CRC Value of
+          a new 32-bit data buffer. This function resets the CRC computation
+          unit before starting the computation to avoid getting wrong CRC values.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CRC
+  * @{
+  */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup CRC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CRC_Exported_Functions_Group1
+ *  @brief   Initialization and de-initialization functions
+ *
+ at verbatim
+  ==============================================================================
+            ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the CRC according to the specified parameters
+          in the CRC_InitTypeDef and create the associated handle
+      (+) DeInitialize the CRC peripheral
+      (+) Initialize the CRC MSP
+      (+) DeInitialize CRC MSP
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRC according to the specified
+  *         parameters in the CRC_InitTypeDef and creates the associated handle.
+  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
+  *         the configuration information for CRC
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc)
+{
+  /* Check the CRC handle allocation */
+  if(hcrc == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
+
+  if(hcrc->State == HAL_CRC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hcrc->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_CRC_MspInit(hcrc);
+  }
+
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_BUSY;
+
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the CRC peripheral.
+  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
+  *         the configuration information for CRC
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc)
+{
+  /* Check the CRC handle allocation */
+  if(hcrc == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
+
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_BUSY;
+
+  /* DeInit the low level hardware */
+  HAL_CRC_MspDeInit(hcrc);
+
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hcrc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRC MSP.
+  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
+  *         the configuration information for CRC
+  * @retval None
+  */
+__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the CRC MSP.
+  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
+  *         the configuration information for CRC
+  * @retval None
+  */
+__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup CRC_Exported_Functions_Group2
+ *  @brief   Peripheral Control functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### Peripheral Control functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Compute the 32-bit CRC value of 32-bit data buffer,
+          using combination of the previous CRC value and the new one.
+      (+) Compute the 32-bit CRC value of 32-bit data buffer,
+          independently of the previous CRC value.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Computes the 32-bit CRC of 32-bit data buffer using combination
+  *         of the previous CRC value and the new one.
+  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
+  *         the configuration information for CRC
+  * @param  pBuffer: pointer to the buffer containing the data to be computed
+  * @param  BufferLength: length of the buffer to be computed
+  * @retval 32-bit CRC
+  */
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
+{
+  uint32_t index = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hcrc);
+
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_BUSY;
+
+  /* Enter Data to the CRC calculator */
+  for(index = 0; index < BufferLength; index++)
+  {
+    hcrc->Instance->DR = pBuffer[index];
+  }
+
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcrc);
+
+  /* Return the CRC computed value */
+  return hcrc->Instance->DR;
+}
+
+/**
+  * @brief  Computes the 32-bit CRC of 32-bit data buffer independently
+  *         of the previous CRC value.
+  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
+  *         the configuration information for CRC
+  * @param  pBuffer: Pointer to the buffer containing the data to be computed
+  * @param  BufferLength: Length of the buffer to be computed
+  * @retval 32-bit CRC
+  */
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
+{
+  uint32_t index = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hcrc);
+
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_BUSY;
+
+  /* Reset CRC Calculation Unit */
+  __HAL_CRC_DR_RESET(hcrc);
+
+  /* Enter Data to the CRC calculator */
+  for(index = 0; index < BufferLength; index++)
+  {
+    hcrc->Instance->DR = pBuffer[index];
+  }
+
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcrc);
+
+  /* Return the CRC computed value */
+  return hcrc->Instance->DR;
+}
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup CRC_Exported_Functions_Group3
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### Peripheral State functions #####
+  ==============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the CRC state.
+  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
+  *         the configuration information for CRC
+  * @retval HAL state
+  */
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc)
+{
+  return hcrc->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_CRC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c
new file mode 100644
index 0000000..7458dfd
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c
@@ -0,0 +1,3813 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_cryp.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   CRYP HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Cryptography (CRYP) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + AES processing functions
+  *           + DES processing functions
+  *           + TDES processing functions
+  *           + DMA callback functions
+  *           + CRYP IRQ handler management
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The CRYP HAL driver can be used as follows:
+
+      (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit():
+         (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()
+         (##) In case of using interrupts (e.g. HAL_CRYP_AESECB_Encrypt_IT())
+             (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority()
+             (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ()
+             (+++) In CRYP IRQ handler, call HAL_CRYP_IRQHandler()
+         (##) In case of using DMA to control data transfer (e.g. HAL_CRYP_AESECB_Encrypt_DMA())
+             (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+             (+++) Configure and enable two DMA streams one for managing data transfer from
+                 memory to peripheral (input stream) and another stream for managing data
+                 transfer from peripheral to memory (output stream)
+             (+++) Associate the initialized DMA handle to the CRYP DMA handle
+                 using  __HAL_LINKDMA()
+             (+++) Configure the priority and enable the NVIC for the transfer complete
+                 interrupt on the two DMA Streams. The output stream should have higher
+                 priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+
+      (#)Initialize the CRYP HAL using HAL_CRYP_Init(). This function configures mainly:
+         (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit
+         (##) The key size: 128, 192 and 256. This parameter is relevant only for AES
+         (##) The encryption/decryption key. It's size depends on the algorithm
+              used for encryption/decryption
+         (##) The initialization vector (counter). It is not used ECB mode.
+
+      (#)Three processing (encryption/decryption) functions are available:
+         (##) Polling mode: encryption and decryption APIs are blocking functions
+              i.e. they process the data and wait till the processing is finished,
+              e.g. HAL_CRYP_AESCBC_Encrypt()
+         (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+              i.e. they process the data under interrupt,
+              e.g. HAL_CRYP_AESCBC_Encrypt_IT()
+         (##) DMA mode: encryption and decryption APIs are not blocking functions
+              i.e. the data transfer is ensured by DMA,
+              e.g. HAL_CRYP_AESCBC_Encrypt_DMA()
+
+      (#)When the processing function is called at first time after HAL_CRYP_Init()
+         the CRYP peripheral is initialized and processes the buffer in input.
+         At second call, the processing function performs an append of the already
+         processed buffer.
+         When a new data block is to be processed, call HAL_CRYP_Init() then the
+         processing function.
+
+       (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CRYP CRYP
+  * @brief CRYP HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup CRYP_Private_define
+  * @{
+  */
+#define CRYP_TIMEOUT_VALUE  1
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup CRYP_Private_Functions_prototypes
+  * @{
+  */
+static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize);
+static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize);
+static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout);
+static HAL_StatusTypeDef CRYP_ProcessData2Words(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout);
+static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma);
+static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma);
+static void CRYP_DMAError(DMA_HandleTypeDef *hdma);
+static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr);
+static void CRYP_SetTDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetTDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+/**
+  * @}
+  */
+
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @addtogroup CRYP_Private_Functions
+  * @{
+  */
+
+
+/**
+  * @brief  DMA CRYP Input Data process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Disable the DMA transfer for input FIFO request by resetting the DIEN bit
+     in the DMACR register */
+  hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN);
+
+  /* Call input data transfer complete callback */
+  HAL_CRYP_InCpltCallback(hcryp);
+}
+
+/**
+  * @brief  DMA CRYP Output Data process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Disable the DMA transfer for output FIFO request by resetting the DOEN bit
+     in the DMACR register */
+  hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN);
+
+  /* Disable CRYP */
+  __HAL_CRYP_DISABLE(hcryp);
+
+  /* Change the CRYP state to ready */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Call output data transfer complete callback */
+  HAL_CRYP_OutCpltCallback(hcryp);
+}
+
+/**
+  * @brief  DMA CRYP communication error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYP_DMAError(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  hcryp->State= HAL_CRYP_STATE_READY;
+  HAL_CRYP_ErrorCallback(hcryp);
+}
+
+/**
+  * @brief  Writes the Key in Key registers.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Key: Pointer to Key buffer
+  * @param  KeySize: Size of Key
+  * @retval None
+  */
+static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize)
+{
+  uint32_t keyaddr = (uint32_t)Key;
+
+  switch(KeySize)
+  {
+  case CRYP_KEYSIZE_256B:
+    /* Key Initialisation */
+    hcryp->Instance->K0LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K0RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  case CRYP_KEYSIZE_192B:
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  case CRYP_KEYSIZE_128B:
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  Writes the InitVector/InitCounter in IV registers.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  InitVector: Pointer to InitVector/InitCounter buffer
+  * @param  IVSize: Size of the InitVector/InitCounter
+  * @retval None
+  */
+static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize)
+{
+  uint32_t ivaddr = (uint32_t)InitVector;
+
+  switch(IVSize)
+  {
+  case CRYP_KEYSIZE_128B:
+    hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV1LR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV1RR = __REV(*(uint32_t*)(ivaddr));
+    break;
+    /* Whatever key size 192 or 256, Init vector is written in IV0LR and IV0RR */
+  case CRYP_KEYSIZE_192B:
+    hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+    break;
+  case CRYP_KEYSIZE_256B:
+    hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+    break;
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  Process Data: Writes Input data in polling mode and read the output data
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Input: Pointer to the Input buffer
+  * @param  Ilength: Length of the Input buffer, must be a multiple of 16.
+  * @param  Output: Pointer to the returned buffer
+  * @param  Timeout: Timeout value
+  *     * @retval None
+  */
+static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  uint32_t i = 0;
+  uint32_t inputaddr  = (uint32_t)Input;
+  uint32_t outputaddr = (uint32_t)Output;
+
+  for(i=0; (i < Ilength); i+=16)
+  {
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+  }
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Process Data: Write Input data in polling mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Input: Pointer to the Input buffer
+  * @param  Ilength: Length of the Input buffer, must be a multiple of 8
+  * @param  Output: Pointer to the returned buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval None
+  */
+static HAL_StatusTypeDef CRYP_ProcessData2Words(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  uint32_t i = 0;
+  uint32_t inputaddr  = (uint32_t)Input;
+  uint32_t outputaddr = (uint32_t)Output;
+
+  for(i=0; (i < Ilength); i+=8)
+  {
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+  }
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the DMA configuration and start the DMA transfer
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  inputaddr: address of the Input buffer
+  * @param  Size: Size of the Input buffer, must be a multiple of 16.
+  * @param  outputaddr: address of the Output buffer
+  * @retval None
+  */
+static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr)
+{
+  /* Set the CRYP DMA transfer complete callback */
+  hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt;
+  /* Set the DMA error callback */
+  hcryp->hdmain->XferErrorCallback = CRYP_DMAError;
+
+  /* Set the CRYP DMA transfer complete callback */
+  hcryp->hdmaout->XferCpltCallback = CRYP_DMAOutCplt;
+  /* Set the DMA error callback */
+  hcryp->hdmaout->XferErrorCallback = CRYP_DMAError;
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DR, Size/4);
+
+  /* Enable In DMA request */
+  hcryp->Instance->DMACR = (CRYP_DMACR_DIEN);
+
+  /* Enable the DMA Out DMA Stream */
+  HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUT, outputaddr, Size/4);
+
+  /* Enable Out DMA request */
+  hcryp->Instance->DMACR |= CRYP_DMACR_DOEN;
+
+}
+
+/**
+  * @brief  Sets the CRYP peripheral in DES ECB mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Direction: Encryption or decryption
+  * @retval None
+  */
+static void CRYP_SetDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_DES_ECB | Direction);
+
+    /* Set the key */
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(hcryp->Init.pKey));
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(hcryp->Init.pKey+4));
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+}
+
+/**
+  * @brief  Sets the CRYP peripheral in DES CBC mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Direction: Encryption or decryption
+  * @retval None
+  */
+static void CRYP_SetDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_DES_CBC | Direction);
+
+    /* Set the key */
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(hcryp->Init.pKey));
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(hcryp->Init.pKey+4));
+
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_256B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+}
+
+/**
+  * @brief  Sets the CRYP peripheral in TDES ECB mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Direction: Encryption or decryption
+  * @retval None
+  */
+static void CRYP_SetTDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_TDES_ECB | Direction);
+
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, CRYP_KEYSIZE_192B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+}
+
+/**
+  * @brief  Sets the CRYP peripheral in TDES CBC mode
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Direction: Encryption or decryption
+  * @retval None
+  */
+static void CRYP_SetTDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the CRYP peripheral in AES CBC mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_TDES_CBC | Direction);
+
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, CRYP_KEYSIZE_192B);
+
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_256B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+}
+
+/**
+  * @}
+  */
+
+ /* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRYP_Exported_Functions
+  * @{
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions.
+ *
+ at verbatim
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the CRYP according to the specified parameters
+          in the CRYP_InitTypeDef and creates the associated handle
+      (+) DeInitialize the CRYP peripheral
+      (+) Initialize the CRYP MSP
+      (+) DeInitialize CRYP MSP
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRYP according to the specified
+  *         parameters in the CRYP_InitTypeDef and creates the associated handle.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp)
+{
+  /* Check the CRYP handle allocation */
+  if(hcryp == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_CRYP_KEYSIZE(hcryp->Init.KeySize));
+  assert_param(IS_CRYP_DATATYPE(hcryp->Init.DataType));
+
+  if(hcryp->State == HAL_CRYP_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hcryp->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_CRYP_MspInit(hcryp);
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set the key size and data type*/
+  CRYP->CR = (uint32_t) (hcryp->Init.KeySize | hcryp->Init.DataType);
+
+  /* Reset CrypInCount and CrypOutCount */
+  hcryp->CrypInCount = 0;
+  hcryp->CrypOutCount = 0;
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Set the default CRYP phase */
+  hcryp->Phase = HAL_CRYP_PHASE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the CRYP peripheral.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp)
+{
+  /* Check the CRYP handle allocation */
+  if(hcryp == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set the default CRYP phase */
+  hcryp->Phase = HAL_CRYP_PHASE_READY;
+
+  /* Reset CrypInCount and CrypOutCount */
+  hcryp->CrypInCount = 0;
+  hcryp->CrypOutCount = 0;
+
+  /* Disable the CRYP Peripheral Clock */
+  __HAL_CRYP_DISABLE(hcryp);
+
+  /* DeInit the low level hardware: CLOCK, NVIC.*/
+  HAL_CRYP_MspDeInit(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP MSP.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes CRYP MSP.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group2 AES processing functions
+ *  @brief   processing functions.
+ *
+ at verbatim
+  ==============================================================================
+                      ##### AES processing functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Encrypt plaintext using AES-128/192/256 using chaining modes
+      (+) Decrypt cyphertext using AES-128/192/256 using chaining modes
+    [..]  Three processing functions are available:
+      (+) Polling mode
+      (+) Interrupt mode
+      (+) DMA mode
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp,pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+   uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES Key mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Disable CRYP */
+    __HAL_CRYP_DISABLE(hcryp);
+
+    /* Reset the ALGOMODE bits*/
+    CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+    /* Set the CRYP peripheral in AES ECB decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES Key mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Reset the ALGOMODE bits*/
+    CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+    /* Set the CRYP peripheral in AES CBC decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES CTR mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB encryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES ECB mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Locked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC encryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES CBC mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Locked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR encryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES CTR mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB decryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;
+
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES Key mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+      {
+        /* Change state */
+        hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hcryp);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Reset the ALGOMODE bits*/
+    CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+    /* Set the CRYP peripheral in AES ECB decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC decryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    /* Get the buffer addresses and sizes */
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES Key mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+      /* Enable CRYP */
+      __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+      {
+        /* Change state */
+        hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hcryp);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+      /* Reset the ALGOMODE bits*/
+      CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+      /* Set the CRYP peripheral in AES CBC decryption mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Enable CRYP */
+      __HAL_CRYP_ENABLE(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR decryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    /* Get the buffer addresses and sizes */
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES CTR mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES ECB mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES ECB mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+       /* Set the phase */
+       hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+     }
+     /* Set the input and output addresses and start DMA transfer */
+     CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+     /* Process Unlocked */
+     __HAL_UNLOCK(hcryp);
+
+     /* Return function status */
+     return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES ECB mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+       /* Set the phase */
+       hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES Key mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+      {
+        /* Change state */
+        hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hcryp);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Reset the ALGOMODE bits*/
+    CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+    /* Set the CRYP peripheral in AES ECB decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+     /* Process Unlocked */
+     __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES Key mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+      /* Enable CRYP */
+      __HAL_CRYP_ENABLE(hcryp);
+
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+
+      /* Reset the ALGOMODE bits*/
+      CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+      /* Set the CRYP peripheral in AES CBC decryption mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES CTR mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group3 DES processing functions
+ *  @brief   processing functions.
+ *
+ at verbatim
+  ==============================================================================
+                      ##### DES processing functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Encrypt plaintext using DES using ECB or CBC chaining modes
+      (+) Decrypt cyphertext using ECB or CBC chaining modes
+    [..]  Three processing functions are available:
+      (+) Polling mode
+      (+) Interrupt mode
+      (+) DMA mode
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB encryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in DES ECB encryption mode */
+  CRYP_SetDESECBMode(hcryp, 0);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in DES ECB decryption mode */
+  CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES CBC encryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in DES CBC encryption mode */
+  CRYP_SetDESCBCMode(hcryp, 0);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in DES CBC decryption mode */
+  CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB encryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES ECB encryption mode */
+    CRYP_SetDESECBMode(hcryp, 0);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES CBC encryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES CBC encryption mode */
+    CRYP_SetDESCBCMode(hcryp, 0);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES ECB decryption mode */
+    CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES CBC decryption mode */
+    CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES ECB encryption mode */
+    CRYP_SetDESECBMode(hcryp, 0);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES CBC encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES CBC encryption mode */
+    CRYP_SetDESCBCMode(hcryp, 0);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES ECB decryption mode */
+    CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES CBC decryption mode */
+    CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group4 TDES processing functions
+ *  @brief   processing functions.
+ *
+ at verbatim
+  ==============================================================================
+                      ##### TDES processing functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Encrypt plaintext using TDES based on ECB or CBC chaining modes
+      (+) Decrypt cyphertext using TDES based on ECB or CBC chaining modes
+    [..]  Three processing functions are available:
+      (+) Polling mode
+      (+) Interrupt mode
+      (+) DMA mode
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in TDES ECB encryption mode */
+  CRYP_SetTDESECBMode(hcryp, 0);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in TDES ECB decryption mode */
+  CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Cypher Data and Get Plain Data */
+  if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in TDES CBC encryption mode */
+  CRYP_SetTDESCBCMode(hcryp, 0);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in TDES CBC decryption mode */
+  CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Cypher Data and Get Plain Data */
+  if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB encryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES ECB encryption mode */
+    CRYP_SetTDESECBMode(hcryp, 0);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call the Output data transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC encryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES CBC encryption mode */
+    CRYP_SetTDESCBCMode(hcryp, 0);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB decryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES ECB decryption mode */
+    CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC decryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES CBC decryption mode */
+    CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES ECB encryption mode */
+    CRYP_SetTDESECBMode(hcryp, 0);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES CBC encryption mode */
+    CRYP_SetTDESCBCMode(hcryp, 0);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES ECB decryption mode */
+    CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES CBC decryption mode */
+    CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group5 DMA callback functions
+ *  @brief   DMA callback functions.
+ *
+ at verbatim
+  ==============================================================================
+                      ##### DMA callback functions  #####
+  ==============================================================================
+    [..]  This section provides DMA callback functions:
+      (+) DMA Input data transfer complete
+      (+) DMA Output data transfer complete
+      (+) DMA error
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Input FIFO transfer completed callbacks.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_InCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Output FIFO transfer completed callbacks.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_OutCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  CRYP error callbacks.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+ __weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group6 CRYP IRQ handler management
+ *  @brief   CRYP IRQ handler.
+ *
+ at verbatim
+  ==============================================================================
+                ##### CRYP IRQ handler management #####
+  ==============================================================================
+[..]  This section provides CRYP IRQ handler function.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function handles CRYP interrupt request.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp)
+{
+  switch(CRYP->CR & CRYP_CR_ALGOMODE_DIRECTION)
+  {
+  case CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT:
+    HAL_CRYP_TDESECB_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT:
+    HAL_CRYP_TDESECB_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT:
+    HAL_CRYP_TDESCBC_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT:
+    HAL_CRYP_TDESCBC_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT:
+    HAL_CRYP_DESECB_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_DES_ECB_DECRYPT:
+    HAL_CRYP_DESECB_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT:
+    HAL_CRYP_DESCBC_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_DES_CBC_DECRYPT:
+    HAL_CRYP_DESCBC_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT:
+    HAL_CRYP_AESECB_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_ECB_DECRYPT:
+    HAL_CRYP_AESECB_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT:
+    HAL_CRYP_AESCBC_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_CBC_DECRYPT:
+    HAL_CRYP_AESCBC_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT:
+    HAL_CRYP_AESCTR_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_CTR_DECRYPT:
+    HAL_CRYP_AESCTR_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  default:
+    break;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group7 Peripheral State functions
+ *  @brief   Peripheral State functions.
+ *
+ at verbatim
+  ==============================================================================
+                      ##### Peripheral State functions #####
+  ==============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the CRYP state.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval HAL state
+  */
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp)
+{
+  return hcryp->State;
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
+
+#endif /* HAL_CRYP_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp_ex.c
new file mode 100644
index 0000000..e957e9d
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp_ex.c
@@ -0,0 +1,3043 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_cryp_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Extended CRYP HAL module driver
+  *          This file provides firmware functions to manage the following
+  *          functionalities of CRYP extension peripheral:
+  *           + Extended AES processing functions
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The CRYP Extension HAL driver can be used as follows:
+    (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit():
+        (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()
+        (##) In case of using interrupts (e.g. HAL_CRYPEx_AESGCM_Encrypt_IT())
+            (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority()
+            (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ()
+            (+) In CRYP IRQ handler, call HAL_CRYP_IRQHandler()
+        (##) In case of using DMA to control data transfer (e.g. HAL_AES_ECB_Encrypt_DMA())
+            (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+            (+++) Configure and enable two DMA streams one for managing data transfer from
+                memory to peripheral (input stream) and another stream for managing data
+                transfer from peripheral to memory (output stream)
+            (+++) Associate the initialized DMA handle to the CRYP DMA handle
+                using  __HAL_LINKDMA()
+            (+++) Configure the priority and enable the NVIC for the transfer complete
+                interrupt on the two DMA Streams. The output stream should have higher
+                priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+    (#)Initialize the CRYP HAL using HAL_CRYP_Init(). This function configures mainly:
+        (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit
+        (##) The key size: 128, 192 and 256. This parameter is relevant only for AES
+        (##) The encryption/decryption key. Its size depends on the algorithm
+                used for encryption/decryption
+        (##) The initialization vector (counter). It is not used ECB mode.
+    (#)Three processing (encryption/decryption) functions are available:
+        (##) Polling mode: encryption and decryption APIs are blocking functions
+             i.e. they process the data and wait till the processing is finished
+             e.g. HAL_CRYPEx_AESGCM_Encrypt()
+        (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+                i.e. they process the data under interrupt
+                e.g. HAL_CRYPEx_AESGCM_Encrypt_IT()
+        (##) DMA mode: encryption and decryption APIs are not blocking functions
+                i.e. the data transfer is ensured by DMA
+                e.g. HAL_CRYPEx_AESGCM_Encrypt_DMA()
+    (#)When the processing function is called at first time after HAL_CRYP_Init()
+       the CRYP peripheral is initialized and processes the buffer in input.
+       At second call, the processing function performs an append of the already
+       processed buffer.
+       When a new data block is to be processed, call HAL_CRYP_Init() then the
+       processing function.
+    (#)In AES-GCM and AES-CCM modes are an authenticated encryption algorithms
+       which provide authentication messages.
+       HAL_AES_GCM_Finish() and HAL_AES_CCM_Finish() are used to provide those
+       authentication messages.
+       Call those functions after the processing ones (polling, interrupt or DMA).
+       e.g. in AES-CCM mode call HAL_CRYPEx_AESCCM_Encrypt() to encrypt the plain data
+            then call HAL_CRYPEx_AESCCM_Finish() to get the authentication message
+    @note: For CCM Encrypt/Decrypt API's, only DataType = 8-bit is supported by this version.
+    @note: The HAL_CRYPEx_AESGCM_xxxx() implementation is limited to 32bits inputs data length
+           (Plain/Cyphertext, Header) compared with GCM standards specifications (800-38D).
+    (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CRYPEx CRYPEx
+  * @brief CRYP Extension HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+
+#if defined(STM32F437xx) || defined(STM32F439xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup CRYPEx_Private_define
+  * @{
+  */
+#define CRYPEx_TIMEOUT_VALUE  1
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup CRYPEx_Private_Functions_prototypes  CRYP Private Functions Prototypes
+  * @{
+  */
+static void CRYPEx_GCMCCM_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector);
+static void CRYPEx_GCMCCM_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize);
+static HAL_StatusTypeDef CRYPEx_GCMCCM_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t *Input, uint16_t Ilength, uint8_t *Output, uint32_t Timeout);
+static HAL_StatusTypeDef CRYPEx_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint32_t Timeout);
+static void CRYPEx_GCMCCM_DMAInCplt(DMA_HandleTypeDef *hdma);
+static void CRYPEx_GCMCCM_DMAOutCplt(DMA_HandleTypeDef *hdma);
+static void CRYPEx_GCMCCM_DMAError(DMA_HandleTypeDef *hdma);
+static void CRYPEx_GCMCCM_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr);
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup CRYPEx_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  DMA CRYP Input Data process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYPEx_GCMCCM_DMAInCplt(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Disable the DMA transfer for input Fifo request by resetting the DIEN bit
+     in the DMACR register */
+  hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN);
+
+  /* Call input data transfer complete callback */
+  HAL_CRYP_InCpltCallback(hcryp);
+}
+
+/**
+  * @brief  DMA CRYP Output Data process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYPEx_GCMCCM_DMAOutCplt(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Disable the DMA transfer for output Fifo request by resetting the DOEN bit
+     in the DMACR register */
+  hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN);
+
+  /* Enable the CRYP peripheral */
+  __HAL_CRYP_DISABLE(hcryp);
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Call output data transfer complete callback */
+  HAL_CRYP_OutCpltCallback(hcryp);
+}
+
+/**
+  * @brief  DMA CRYP communication error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYPEx_GCMCCM_DMAError(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hcryp->State= HAL_CRYP_STATE_READY;
+  HAL_CRYP_ErrorCallback(hcryp);
+}
+
+/**
+  * @brief  Writes the Key in Key registers.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Key: Pointer to Key buffer
+  * @param  KeySize: Size of Key
+  * @retval None
+  */
+static void CRYPEx_GCMCCM_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize)
+{
+  uint32_t keyaddr = (uint32_t)Key;
+
+  switch(KeySize)
+  {
+  case CRYP_KEYSIZE_256B:
+    /* Key Initialisation */
+    hcryp->Instance->K0LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K0RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  case CRYP_KEYSIZE_192B:
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  case CRYP_KEYSIZE_128B:
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  Writes the InitVector/InitCounter in IV registers.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  InitVector: Pointer to InitVector/InitCounter buffer
+  * @retval None
+  */
+static void CRYPEx_GCMCCM_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector)
+{
+  uint32_t ivaddr = (uint32_t)InitVector;
+
+  hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+  ivaddr+=4;
+  hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+  ivaddr+=4;
+  hcryp->Instance->IV1LR = __REV(*(uint32_t*)(ivaddr));
+  ivaddr+=4;
+  hcryp->Instance->IV1RR = __REV(*(uint32_t*)(ivaddr));
+}
+
+/**
+  * @brief  Process Data: Writes Input data in polling mode and read the Output data.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Input: Pointer to the Input buffer.
+  * @param  Ilength: Length of the Input buffer, must be a multiple of 16
+  * @param  Output: Pointer to the returned buffer
+  * @param  Timeout: Timeout value
+  * @retval None
+  */
+static HAL_StatusTypeDef CRYPEx_GCMCCM_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t *Input, uint16_t Ilength, uint8_t *Output, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  uint32_t i = 0;
+  uint32_t inputaddr  = (uint32_t)Input;
+  uint32_t outputaddr = (uint32_t)Output;
+
+  for(i=0; (i < Ilength); i+=16)
+  {
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /* Read the Output block from the OUT FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+  }
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets the header phase
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Input: Pointer to the Input buffer.
+  * @param  Ilength: Length of the Input buffer, must be a multiple of 16
+  * @param  Timeout: Timeout value
+  * @retval None
+  */
+static HAL_StatusTypeDef CRYPEx_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  uint32_t loopcounter = 0;
+  uint32_t headeraddr = (uint32_t)Input;
+
+  /***************************** Header phase *********************************/
+  if(hcryp->Init.HeaderSize != 0)
+  {
+    /* Select header phase */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    for(loopcounter = 0; (loopcounter < hcryp->Init.HeaderSize); loopcounter+=16)
+    {
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+      {
+        /* Check for the Timeout */
+        if(Timeout != HAL_MAX_DELAY)
+        {
+          if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      /* Write the Input block in the IN FIFO */
+      hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+      headeraddr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+      headeraddr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+      headeraddr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+      headeraddr+=4;
+    }
+
+    /* Wait until the complete message has been processed */
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets the DMA configuration and start the DMA transfer.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  inputaddr: Address of the Input buffer
+  * @param  Size: Size of the Input buffer, must be a multiple of 16
+  * @param  outputaddr: Address of the Output buffer
+  * @retval None
+  */
+static void CRYPEx_GCMCCM_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr)
+{
+  /* Set the CRYP DMA transfer complete callback */
+  hcryp->hdmain->XferCpltCallback = CRYPEx_GCMCCM_DMAInCplt;
+  /* Set the DMA error callback */
+  hcryp->hdmain->XferErrorCallback = CRYPEx_GCMCCM_DMAError;
+
+  /* Set the CRYP DMA transfer complete callback */
+  hcryp->hdmaout->XferCpltCallback = CRYPEx_GCMCCM_DMAOutCplt;
+  /* Set the DMA error callback */
+  hcryp->hdmaout->XferErrorCallback = CRYPEx_GCMCCM_DMAError;
+
+  /* Enable the CRYP peripheral */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DR, Size/4);
+
+  /* Enable In DMA request */
+  hcryp->Instance->DMACR = CRYP_DMACR_DIEN;
+
+  /* Enable the DMA Out DMA Stream */
+  HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUT, outputaddr, Size/4);
+
+  /* Enable Out DMA request */
+  hcryp->Instance->DMACR |= CRYP_DMACR_DOEN;
+}
+
+/**
+  * @}
+  */
+
+/* Exported functions---------------------------------------------------------*/
+/** @addtogroup CRYPEx_Exported_Functions
+  * @{
+  */
+
+/** @defgroup CRYPEx_Exported_Functions_Group1 Extended AES processing functions
+ *  @brief   Extended processing functions.
+ *
+ at verbatim
+  ==============================================================================
+              ##### Extended AES processing functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Encrypt plaintext using AES-128/192/256 using GCM and CCM chaining modes
+      (+) Decrypt cyphertext using AES-128/192/256 using GCM and CCM chaining modes
+      (+) Finish the processing. This function is available only for GCM and CCM
+    [..]  Three processing methods are available:
+      (+) Polling mode
+      (+) Interrupt mode
+      (+) DMA mode
+
+ at endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CCM encryption mode then
+  *         encrypt pPlainData. The cypher data are available in pCypherData.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  uint32_t headersize = hcryp->Init.HeaderSize;
+  uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
+  uint32_t loopcounter = 0;
+  uint32_t bufferidx = 0;
+  uint8_t blockb0[16] = {0};/* Block B0 */
+  uint8_t ctr[16] = {0}; /* Counter */
+  uint32_t b0addr = (uint32_t)blockb0;
+
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /************************ Formatting the header block *********************/
+    if(headersize != 0)
+    {
+      /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+      if(headersize < 65280)
+      {
+        hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
+        hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
+        headersize += 2;
+      }
+      else
+      {
+        /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+        hcryp->Init.pScratch[bufferidx++] = 0xFF;
+        hcryp->Init.pScratch[bufferidx++] = 0xFE;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
+        headersize += 6;
+      }
+      /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+      for(loopcounter = 0; loopcounter < headersize; loopcounter++)
+      {
+        hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+      }
+      /* Check if the header size is modulo 16 */
+      if ((headersize % 16) != 0)
+      {
+        /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+        for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
+        {
+          hcryp->Init.pScratch[loopcounter] = 0;
+        }
+        /* Set the header size to modulo 16 */
+        headersize = ((headersize/16) + 1) * 16;
+      }
+      /* Set the pointer headeraddr to hcryp->Init.pScratch */
+      headeraddr = (uint32_t)hcryp->Init.pScratch;
+    }
+    /*********************** Formatting the block B0 **************************/
+    if(headersize != 0)
+    {
+      blockb0[0] = 0x40;
+    }
+    /* Flags byte */
+    /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
+    blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
+    blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
+
+    for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
+    {
+      blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
+    }
+    for ( ; loopcounter < 13; loopcounter++)
+    {
+      blockb0[loopcounter+1] = 0;
+    }
+
+    blockb0[14] = (Size >> 8);
+    blockb0[15] = (Size & 0xFF);
+
+    /************************* Formatting the initial counter *****************/
+    /* Byte 0:
+       Bits 7 and 6 are reserved and shall be set to 0
+       Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter blocks
+       are distinct from B0
+       Bits 0, 1, and 2 contain the same encoding of q as in B0
+    */
+    ctr[0] = blockb0[0] & 0x07;
+    /* byte 1 to NonceSize is the IV (Nonce) */
+    for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
+    {
+      ctr[loopcounter] = blockb0[loopcounter];
+    }
+    /* Set the LSB to 1 */
+    ctr[15] |= 0x01;
+
+    /* Set the key */
+    CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES CCM mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
+
+    /* Set the Initialization Vector */
+    CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+
+    /* Select init phase */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+
+    b0addr = (uint32_t)blockb0;
+    /* Write the blockb0 block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    b0addr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    b0addr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    b0addr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /***************************** Header phase *******************************/
+    if(headersize != 0)
+    {
+      /* Select header phase */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+
+      for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+        {
+          {
+            /* Check for the Timeout */
+            if(Timeout != HAL_MAX_DELAY)
+            {
+              if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+              {
+                /* Change state */
+                hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+                /* Process Unlocked */
+                __HAL_UNLOCK(hcryp);
+
+                return HAL_TIMEOUT;
+              }
+            }
+          }
+        }
+        /* Write the header block in the IN FIFO */
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+      }
+
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+      {
+        /* Check for the Timeout */
+        if(Timeout != HAL_MAX_DELAY)
+        {
+          if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+    /* Save formatted counter into the scratch buffer pScratch */
+    for(loopcounter = 0; (loopcounter < 16); loopcounter++)
+    {
+      hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+    }
+    /* Reset bit 0 */
+    hcryp->Init.pScratch[15] &= 0xfe;
+
+    /* Select payload phase once the header phase is performed */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYPEx_GCMCCM_ProcessData(hcryp,pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES GCM encryption mode then
+  *         encrypt pPlainData. The cypher data are available in pCypherData.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES GCM mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
+
+    /* Set the Initialization Vector */
+    CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Set the header phase */
+    if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Disable the CRYP peripheral */
+    __HAL_CRYP_DISABLE(hcryp);
+
+    /* Select payload phase once the header phase is performed */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYPEx_GCMCCM_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES GCM decryption mode then
+  *         decrypted pCypherData. The cypher data are available in pPlainData.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the cyphertext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES GCM decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
+
+    /* Set the Initialization Vector */
+    CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Set the header phase */
+    if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+    /* Disable the CRYP peripheral */
+    __HAL_CRYP_DISABLE(hcryp);
+
+    /* Select payload phase once the header phase is performed */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYPEx_GCMCCM_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Computes the authentication TAG.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Size: Total length of the plain/cyphertext buffer
+  * @param  AuthTag: Pointer to the authentication buffer
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Finish(CRYP_HandleTypeDef *hcryp, uint32_t Size, uint8_t *AuthTag, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  uint64_t headerlength = hcryp->Init.HeaderSize * 8; /* Header length in bits */
+  uint64_t inputlength = Size * 8; /* input length in bits */
+  uint32_t tagaddr = (uint32_t)AuthTag;
+
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_PROCESS)
+  {
+    /* Change the CRYP phase */
+    hcryp->Phase = HAL_CRYP_PHASE_FINAL;
+
+    /* Disable CRYP to start the final phase */
+    __HAL_CRYP_DISABLE(hcryp);
+
+    /* Select final phase */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_FINAL);
+
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Write the number of bits in header (64 bits) followed by the number of bits
+       in the payload */
+    if(hcryp->Init.DataType == CRYP_DATATYPE_1B)
+    {
+      hcryp->Instance->DR = __RBIT(headerlength >> 32);
+      hcryp->Instance->DR = __RBIT(headerlength);
+      hcryp->Instance->DR = __RBIT(inputlength >> 32);
+      hcryp->Instance->DR = __RBIT(inputlength);
+    }
+    else if(hcryp->Init.DataType == CRYP_DATATYPE_8B)
+    {
+      hcryp->Instance->DR = __REV(headerlength >> 32);
+      hcryp->Instance->DR = __REV(headerlength);
+      hcryp->Instance->DR = __REV(inputlength >> 32);
+      hcryp->Instance->DR = __REV(inputlength);
+    }
+    else if(hcryp->Init.DataType == CRYP_DATATYPE_16B)
+    {
+      hcryp->Instance->DR = __ROR((uint32_t)(headerlength >> 32), 16);
+      hcryp->Instance->DR = __ROR((uint32_t)headerlength, 16);
+      hcryp->Instance->DR = __ROR((uint32_t)(inputlength >> 32), 16);
+      hcryp->Instance->DR = __ROR((uint32_t)inputlength, 16);
+    }
+    else if(hcryp->Init.DataType == CRYP_DATATYPE_32B)
+    {
+      hcryp->Instance->DR = (uint32_t)(headerlength >> 32);
+      hcryp->Instance->DR = (uint32_t)(headerlength);
+      hcryp->Instance->DR = (uint32_t)(inputlength >> 32);
+      hcryp->Instance->DR = (uint32_t)(inputlength);
+    }
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Read the Auth TAG in the IN FIFO */
+    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
+    tagaddr+=4;
+    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
+    tagaddr+=4;
+    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
+    tagaddr+=4;
+    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
+  }
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Computes the authentication TAG for AES CCM mode.
+  * @note   This API is called after HAL_AES_CCM_Encrypt()/HAL_AES_CCM_Decrypt()
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  AuthTag: Pointer to the authentication buffer
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Finish(CRYP_HandleTypeDef *hcryp, uint8_t *AuthTag, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  uint32_t tagaddr = (uint32_t)AuthTag;
+  uint32_t ctraddr = (uint32_t)hcryp->Init.pScratch;
+  uint32_t temptag[4] = {0}; /* Temporary TAG (MAC) */
+  uint32_t loopcounter;
+
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_PROCESS)
+  {
+    /* Change the CRYP phase */
+    hcryp->Phase = HAL_CRYP_PHASE_FINAL;
+
+    /* Disable CRYP to start the final phase */
+    __HAL_CRYP_DISABLE(hcryp);
+
+    /* Select final phase */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_FINAL);
+
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Write the counter block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)ctraddr;
+    ctraddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)ctraddr;
+    ctraddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)ctraddr;
+    ctraddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)ctraddr;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Read the Auth TAG in the IN FIFO */
+    temptag[0] = hcryp->Instance->DOUT;
+    temptag[1] = hcryp->Instance->DOUT;
+    temptag[2] = hcryp->Instance->DOUT;
+    temptag[3] = hcryp->Instance->DOUT;
+  }
+
+  /* Copy temporary authentication TAG in user TAG buffer */
+  for(loopcounter = 0; loopcounter < hcryp->Init.TagSize ; loopcounter++)
+  {
+    /* Set the authentication TAG buffer */
+    *((uint8_t*)tagaddr+loopcounter) = *((uint8_t*)temptag+loopcounter);
+  }
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CCM decryption mode then
+  *         decrypted pCypherData. The cypher data are available in pPlainData.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  uint32_t headersize = hcryp->Init.HeaderSize;
+  uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
+  uint32_t loopcounter = 0;
+  uint32_t bufferidx = 0;
+  uint8_t blockb0[16] = {0};/* Block B0 */
+  uint8_t ctr[16] = {0}; /* Counter */
+  uint32_t b0addr = (uint32_t)blockb0;
+
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /************************ Formatting the header block *********************/
+    if(headersize != 0)
+    {
+      /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+      if(headersize < 65280)
+      {
+        hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
+        hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
+        headersize += 2;
+      }
+      else
+      {
+        /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+        hcryp->Init.pScratch[bufferidx++] = 0xFF;
+        hcryp->Init.pScratch[bufferidx++] = 0xFE;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
+        headersize += 6;
+      }
+      /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+      for(loopcounter = 0; loopcounter < headersize; loopcounter++)
+      {
+        hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+      }
+      /* Check if the header size is modulo 16 */
+      if ((headersize % 16) != 0)
+      {
+        /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+        for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
+        {
+          hcryp->Init.pScratch[loopcounter] = 0;
+        }
+        /* Set the header size to modulo 16 */
+        headersize = ((headersize/16) + 1) * 16;
+      }
+      /* Set the pointer headeraddr to hcryp->Init.pScratch */
+      headeraddr = (uint32_t)hcryp->Init.pScratch;
+    }
+    /*********************** Formatting the block B0 **************************/
+    if(headersize != 0)
+    {
+      blockb0[0] = 0x40;
+    }
+    /* Flags byte */
+    /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
+    blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
+    blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
+
+    for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
+    {
+      blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
+    }
+    for ( ; loopcounter < 13; loopcounter++)
+    {
+      blockb0[loopcounter+1] = 0;
+    }
+
+    blockb0[14] = (Size >> 8);
+    blockb0[15] = (Size & 0xFF);
+
+    /************************* Formatting the initial counter *****************/
+    /* Byte 0:
+       Bits 7 and 6 are reserved and shall be set to 0
+       Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
+       blocks are distinct from B0
+       Bits 0, 1, and 2 contain the same encoding of q as in B0
+    */
+    ctr[0] = blockb0[0] & 0x07;
+    /* byte 1 to NonceSize is the IV (Nonce) */
+    for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
+    {
+      ctr[loopcounter] = blockb0[loopcounter];
+    }
+    /* Set the LSB to 1 */
+    ctr[15] |= 0x01;
+
+    /* Set the key */
+    CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES CCM mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
+
+    /* Set the Initialization Vector */
+    CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+
+    /* Select init phase */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+
+    b0addr = (uint32_t)blockb0;
+    /* Write the blockb0 block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    b0addr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    b0addr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    b0addr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /***************************** Header phase *******************************/
+    if(headersize != 0)
+    {
+      /* Select header phase */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+
+      /* Enable Crypto processor */
+      __HAL_CRYP_ENABLE(hcryp);
+
+      for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+        {
+          /* Check for the Timeout */
+          if(Timeout != HAL_MAX_DELAY)
+          {
+            if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+            {
+              /* Change state */
+              hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+              /* Process Unlocked */
+              __HAL_UNLOCK(hcryp);
+
+              return HAL_TIMEOUT;
+            }
+          }
+        }
+        /* Write the header block in the IN FIFO */
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+      }
+
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+      {
+      /* Check for the Timeout */
+        if(Timeout != HAL_MAX_DELAY)
+        {
+          if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+    /* Save formatted counter into the scratch buffer pScratch */
+    for(loopcounter = 0; (loopcounter < 16); loopcounter++)
+    {
+      hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+    }
+    /* Reset bit 0 */
+    hcryp->Init.pScratch[15] &= 0xfe;
+    /* Select payload phase once the header phase is performed */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYPEx_GCMCCM_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES GCM encryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    /* Get the buffer addresses and sizes */
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES GCM mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
+
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Enable CRYP to start the init phase */
+      __HAL_CRYP_ENABLE(hcryp);
+
+     /* Get tick */
+     tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+
+        }
+      }
+
+      /* Set the header phase */
+      if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      /* Disable the CRYP peripheral */
+      __HAL_CRYP_DISABLE(hcryp);
+
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    if(Size != 0)
+    {
+      /* Enable Interrupts */
+      __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+    }
+    else
+    {
+      /* Process Locked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state and phase */
+      hcryp->State = HAL_CRYP_STATE_READY;
+    }
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP peripheral state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CCM encryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  uint32_t headersize = hcryp->Init.HeaderSize;
+  uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
+  uint32_t loopcounter = 0;
+  uint32_t bufferidx = 0;
+  uint8_t blockb0[16] = {0};/* Block B0 */
+  uint8_t ctr[16] = {0}; /* Counter */
+  uint32_t b0addr = (uint32_t)blockb0;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /************************ Formatting the header block *******************/
+      if(headersize != 0)
+      {
+        /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+        if(headersize < 65280)
+        {
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
+          headersize += 2;
+        }
+        else
+        {
+          /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+          hcryp->Init.pScratch[bufferidx++] = 0xFF;
+          hcryp->Init.pScratch[bufferidx++] = 0xFE;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
+          headersize += 6;
+        }
+        /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+        for(loopcounter = 0; loopcounter < headersize; loopcounter++)
+        {
+          hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+        }
+        /* Check if the header size is modulo 16 */
+        if ((headersize % 16) != 0)
+        {
+          /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+          for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
+          {
+            hcryp->Init.pScratch[loopcounter] = 0;
+          }
+          /* Set the header size to modulo 16 */
+          headersize = ((headersize/16) + 1) * 16;
+        }
+        /* Set the pointer headeraddr to hcryp->Init.pScratch */
+        headeraddr = (uint32_t)hcryp->Init.pScratch;
+      }
+      /*********************** Formatting the block B0 ************************/
+      if(headersize != 0)
+      {
+        blockb0[0] = 0x40;
+      }
+      /* Flags byte */
+      /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
+
+      for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
+      {
+        blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
+      }
+      for ( ; loopcounter < 13; loopcounter++)
+      {
+        blockb0[loopcounter+1] = 0;
+      }
+
+      blockb0[14] = (Size >> 8);
+      blockb0[15] = (Size & 0xFF);
+
+      /************************* Formatting the initial counter ***************/
+      /* Byte 0:
+         Bits 7 and 6 are reserved and shall be set to 0
+         Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
+         blocks are distinct from B0
+         Bits 0, 1, and 2 contain the same encoding of q as in B0
+      */
+      ctr[0] = blockb0[0] & 0x07;
+      /* byte 1 to NonceSize is the IV (Nonce) */
+      for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
+      {
+        ctr[loopcounter] = blockb0[loopcounter];
+      }
+      /* Set the LSB to 1 */
+      ctr[15] |= 0x01;
+
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES CCM mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
+
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+
+      /* Select init phase */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+
+      b0addr = (uint32_t)blockb0;
+      /* Write the blockb0 block in the IN FIFO */
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+
+     /* Get tick */
+     tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+      /***************************** Header phase *****************************/
+      if(headersize != 0)
+      {
+        /* Select header phase */
+        __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+
+        /* Enable Crypto processor */
+        __HAL_CRYP_ENABLE(hcryp);
+
+        for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
+        {
+         /* Get tick */
+         tickstart = HAL_GetTick();
+
+          while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+          {
+            /* Check for the Timeout */
+            if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+            {
+              /* Change state */
+              hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+              /* Process Unlocked */
+              __HAL_UNLOCK(hcryp);
+
+              return HAL_TIMEOUT;
+            }
+          }
+          /* Write the header block in the IN FIFO */
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+        }
+
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+        {
+          /* Check for the Timeout */
+          if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      /* Save formatted counter into the scratch buffer pScratch */
+      for(loopcounter = 0; (loopcounter < 16); loopcounter++)
+      {
+        hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+      }
+      /* Reset bit 0 */
+      hcryp->Init.pScratch[15] &= 0xfe;
+
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    if(Size != 0)
+    {
+      /* Enable Interrupts */
+      __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+    }
+    else
+    {
+      /* Change the CRYP state and phase */
+      hcryp->State = HAL_CRYP_STATE_READY;
+    }
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call Input transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP peripheral state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES GCM decryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the cyphertext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    /* Get the buffer addresses and sizes */
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES GCM decryption mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
+
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Enable CRYP to start the init phase */
+      __HAL_CRYP_ENABLE(hcryp);
+
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+
+      /* Set the header phase */
+      if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      /* Disable the CRYP peripheral */
+      __HAL_CRYP_DISABLE(hcryp);
+
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    if(Size != 0)
+    {
+      /* Enable Interrupts */
+      __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+    }
+    else
+    {
+      /* Process Locked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state and phase */
+      hcryp->State = HAL_CRYP_STATE_READY;
+    }
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP peripheral state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CCM decryption mode using interrupt
+  *         then decrypted pCypherData. The cypher data are available in pPlainData.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  uint32_t tickstart = 0;
+  uint32_t headersize = hcryp->Init.HeaderSize;
+  uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
+  uint32_t loopcounter = 0;
+  uint32_t bufferidx = 0;
+  uint8_t blockb0[16] = {0};/* Block B0 */
+  uint8_t ctr[16] = {0}; /* Counter */
+  uint32_t b0addr = (uint32_t)blockb0;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /************************ Formatting the header block *******************/
+      if(headersize != 0)
+      {
+        /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+        if(headersize < 65280)
+        {
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
+          headersize += 2;
+        }
+        else
+        {
+          /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+          hcryp->Init.pScratch[bufferidx++] = 0xFF;
+          hcryp->Init.pScratch[bufferidx++] = 0xFE;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
+          headersize += 6;
+        }
+        /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+        for(loopcounter = 0; loopcounter < headersize; loopcounter++)
+        {
+          hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+        }
+        /* Check if the header size is modulo 16 */
+        if ((headersize % 16) != 0)
+        {
+          /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+          for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
+          {
+            hcryp->Init.pScratch[loopcounter] = 0;
+          }
+          /* Set the header size to modulo 16 */
+          headersize = ((headersize/16) + 1) * 16;
+        }
+        /* Set the pointer headeraddr to hcryp->Init.pScratch */
+        headeraddr = (uint32_t)hcryp->Init.pScratch;
+      }
+      /*********************** Formatting the block B0 ************************/
+      if(headersize != 0)
+      {
+        blockb0[0] = 0x40;
+      }
+      /* Flags byte */
+      /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
+
+      for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
+      {
+        blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
+      }
+      for ( ; loopcounter < 13; loopcounter++)
+      {
+        blockb0[loopcounter+1] = 0;
+      }
+
+      blockb0[14] = (Size >> 8);
+      blockb0[15] = (Size & 0xFF);
+
+      /************************* Formatting the initial counter ***************/
+      /* Byte 0:
+         Bits 7 and 6 are reserved and shall be set to 0
+         Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
+         blocks are distinct from B0
+         Bits 0, 1, and 2 contain the same encoding of q as in B0
+      */
+      ctr[0] = blockb0[0] & 0x07;
+      /* byte 1 to NonceSize is the IV (Nonce) */
+      for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
+      {
+        ctr[loopcounter] = blockb0[loopcounter];
+      }
+      /* Set the LSB to 1 */
+      ctr[15] |= 0x01;
+
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES CCM mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
+
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+
+      /* Select init phase */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+
+      b0addr = (uint32_t)blockb0;
+      /* Write the blockb0 block in the IN FIFO */
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+      /***************************** Header phase *****************************/
+      if(headersize != 0)
+      {
+        /* Select header phase */
+        __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+
+        /* Enable Crypto processor */
+        __HAL_CRYP_ENABLE(hcryp);
+
+        for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
+        {
+         /* Get tick */
+         tickstart = HAL_GetTick();
+
+          while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+          {
+            /* Check for the Timeout */
+            if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+            {
+              /* Change state */
+              hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+              /* Process Unlocked */
+              __HAL_UNLOCK(hcryp);
+
+              return HAL_TIMEOUT;
+            }
+          }
+          /* Write the header block in the IN FIFO */
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+        }
+
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+        {
+          /* Check for the Timeout */
+          if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      /* Save formatted counter into the scratch buffer pScratch */
+      for(loopcounter = 0; (loopcounter < 16); loopcounter++)
+      {
+        hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+      }
+      /* Reset bit 0 */
+      hcryp->Init.pScratch[15] &= 0xfe;
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP peripheral state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES GCM encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES GCM mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
+
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Enable CRYP to start the init phase */
+      __HAL_CRYP_ENABLE(hcryp);
+
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the header phase */
+      if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      /* Disable the CRYP peripheral */
+      __HAL_CRYP_DISABLE(hcryp);
+
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Unlock process */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CCM encryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  uint32_t headersize;
+  uint32_t headeraddr;
+  uint32_t loopcounter = 0;
+  uint32_t bufferidx = 0;
+  uint8_t blockb0[16] = {0};/* Block B0 */
+  uint8_t ctr[16] = {0}; /* Counter */
+  uint32_t b0addr = (uint32_t)blockb0;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    headersize = hcryp->Init.HeaderSize;
+    headeraddr = (uint32_t)hcryp->Init.Header;
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /************************ Formatting the header block *******************/
+      if(headersize != 0)
+      {
+        /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+        if(headersize < 65280)
+        {
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
+          headersize += 2;
+        }
+        else
+        {
+          /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+          hcryp->Init.pScratch[bufferidx++] = 0xFF;
+          hcryp->Init.pScratch[bufferidx++] = 0xFE;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
+          headersize += 6;
+        }
+        /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+        for(loopcounter = 0; loopcounter < headersize; loopcounter++)
+        {
+          hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+        }
+        /* Check if the header size is modulo 16 */
+        if ((headersize % 16) != 0)
+        {
+          /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+          for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
+          {
+            hcryp->Init.pScratch[loopcounter] = 0;
+          }
+          /* Set the header size to modulo 16 */
+          headersize = ((headersize/16) + 1) * 16;
+        }
+        /* Set the pointer headeraddr to hcryp->Init.pScratch */
+        headeraddr = (uint32_t)hcryp->Init.pScratch;
+      }
+      /*********************** Formatting the block B0 ************************/
+      if(headersize != 0)
+      {
+        blockb0[0] = 0x40;
+      }
+      /* Flags byte */
+      /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
+
+      for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
+      {
+        blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
+      }
+      for ( ; loopcounter < 13; loopcounter++)
+      {
+        blockb0[loopcounter+1] = 0;
+      }
+
+      blockb0[14] = (Size >> 8);
+      blockb0[15] = (Size & 0xFF);
+
+      /************************* Formatting the initial counter ***************/
+      /* Byte 0:
+         Bits 7 and 6 are reserved and shall be set to 0
+         Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
+         blocks are distinct from B0
+         Bits 0, 1, and 2 contain the same encoding of q as in B0
+      */
+      ctr[0] = blockb0[0] & 0x07;
+      /* byte 1 to NonceSize is the IV (Nonce) */
+      for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
+      {
+        ctr[loopcounter] = blockb0[loopcounter];
+      }
+      /* Set the LSB to 1 */
+      ctr[15] |= 0x01;
+
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES CCM mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
+
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+
+      /* Select init phase */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+
+      b0addr = (uint32_t)blockb0;
+      /* Write the blockb0 block in the IN FIFO */
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+      /***************************** Header phase *****************************/
+      if(headersize != 0)
+      {
+        /* Select header phase */
+        __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+
+        /* Enable Crypto processor */
+        __HAL_CRYP_ENABLE(hcryp);
+
+        for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
+        {
+         /* Get tick */
+         tickstart = HAL_GetTick();
+
+          while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+          {
+            /* Check for the Timeout */
+            if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+            {
+              /* Change state */
+              hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+              /* Process Unlocked */
+              __HAL_UNLOCK(hcryp);
+
+              return HAL_TIMEOUT;
+            }
+          }
+          /* Write the header block in the IN FIFO */
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+        }
+
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+        {
+          /* Check for the Timeout */
+          if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      /* Save formatted counter into the scratch buffer pScratch */
+      for(loopcounter = 0; (loopcounter < 16); loopcounter++)
+      {
+        hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+      }
+      /* Reset bit 0 */
+      hcryp->Init.pScratch[15] &= 0xfe;
+
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Unlock process */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES GCM decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer.
+  * @param  Size: Length of the cyphertext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES GCM decryption mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
+
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+
+      /* Enable CRYP to start the init phase */
+      __HAL_CRYP_ENABLE(hcryp);
+
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+
+      /* Set the header phase */
+      if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      /* Disable the CRYP peripheral */
+      __HAL_CRYP_DISABLE(hcryp);
+
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Unlock process */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CCM decryption mode using DMA
+  *         then decrypted pCypherData. The cypher data are available in pPlainData.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  uint32_t headersize;
+  uint32_t headeraddr;
+  uint32_t loopcounter = 0;
+  uint32_t bufferidx = 0;
+  uint8_t blockb0[16] = {0};/* Block B0 */
+  uint8_t ctr[16] = {0}; /* Counter */
+  uint32_t b0addr = (uint32_t)blockb0;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    headersize = hcryp->Init.HeaderSize;
+    headeraddr = (uint32_t)hcryp->Init.Header;
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /************************ Formatting the header block *******************/
+      if(headersize != 0)
+      {
+        /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+        if(headersize < 65280)
+        {
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
+          headersize += 2;
+        }
+        else
+        {
+          /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+          hcryp->Init.pScratch[bufferidx++] = 0xFF;
+          hcryp->Init.pScratch[bufferidx++] = 0xFE;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
+          headersize += 6;
+        }
+        /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+        for(loopcounter = 0; loopcounter < headersize; loopcounter++)
+        {
+          hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+        }
+        /* Check if the header size is modulo 16 */
+        if ((headersize % 16) != 0)
+        {
+          /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+          for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
+          {
+            hcryp->Init.pScratch[loopcounter] = 0;
+          }
+          /* Set the header size to modulo 16 */
+          headersize = ((headersize/16) + 1) * 16;
+        }
+        /* Set the pointer headeraddr to hcryp->Init.pScratch */
+        headeraddr = (uint32_t)hcryp->Init.pScratch;
+      }
+      /*********************** Formatting the block B0 ************************/
+      if(headersize != 0)
+      {
+        blockb0[0] = 0x40;
+      }
+      /* Flags byte */
+      /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
+
+      for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
+      {
+        blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
+      }
+      for ( ; loopcounter < 13; loopcounter++)
+      {
+        blockb0[loopcounter+1] = 0;
+      }
+
+      blockb0[14] = (Size >> 8);
+      blockb0[15] = (Size & 0xFF);
+
+      /************************* Formatting the initial counter ***************/
+      /* Byte 0:
+         Bits 7 and 6 are reserved and shall be set to 0
+         Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
+         blocks are distinct from B0
+         Bits 0, 1, and 2 contain the same encoding of q as in B0
+      */
+      ctr[0] = blockb0[0] & 0x07;
+      /* byte 1 to NonceSize is the IV (Nonce) */
+      for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
+      {
+        ctr[loopcounter] = blockb0[loopcounter];
+      }
+      /* Set the LSB to 1 */
+      ctr[15] |= 0x01;
+
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES CCM mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
+
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+
+      /* Select init phase */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+
+      b0addr = (uint32_t)blockb0;
+      /* Write the blockb0 block in the IN FIFO */
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+
+        }
+      }
+      /***************************** Header phase *****************************/
+      if(headersize != 0)
+      {
+        /* Select header phase */
+        __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+
+        /* Enable Crypto processor */
+        __HAL_CRYP_ENABLE(hcryp);
+
+        for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
+        {
+         /* Get tick */
+         tickstart = HAL_GetTick();
+
+          while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+          {
+            /* Check for the Timeout */
+            if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+            {
+              /* Change state */
+              hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+              /* Process Unlocked */
+              __HAL_UNLOCK(hcryp);
+
+              return HAL_TIMEOUT;
+            }
+          }
+          /* Write the header block in the IN FIFO */
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+        }
+
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+        {
+          /* Check for the Timeout */
+          if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      /* Save formatted counter into the scratch buffer pScratch */
+      for(loopcounter = 0; (loopcounter < 16); loopcounter++)
+      {
+        hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+      }
+      /* Reset bit 0 */
+      hcryp->Init.pScratch[15] &= 0xfe;
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    /* Set the input and output addresses and start DMA transfer */
+    CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Unlock process */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYPEx_Exported_Functions_Group2 CRYPEx IRQ handler management
+ *  @brief   CRYPEx IRQ handler.
+ *
+ at verbatim
+  ==============================================================================
+                ##### CRYPEx IRQ handler management #####
+  ==============================================================================
+[..]  This section provides CRYPEx IRQ handler function.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function handles CRYPEx interrupt request.
+  * @param  hcryp: pointer to a CRYPEx_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+
+void HAL_CRYPEx_GCMCCM_IRQHandler(CRYP_HandleTypeDef *hcryp)
+{
+  switch(CRYP->CR & CRYP_CR_ALGOMODE_DIRECTION)
+  {
+  case CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT:
+    HAL_CRYPEx_AESGCM_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_GCM_DECRYPT:
+    HAL_CRYPEx_AESGCM_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT:
+    HAL_CRYPEx_AESCCM_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_CCM_DECRYPT:
+    HAL_CRYPEx_AESCCM_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  default:
+    break;
+  }
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F437xx || STM32F439xx */
+
+#endif /* HAL_CRYP_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c
new file mode 100644
index 0000000..552ca85
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c
@@ -0,0 +1,953 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dac.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   DAC HAL module driver.
+  *         This file provides firmware functions to manage the following
+  *         functionalities of the Digital to Analog Converter (DAC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State and Errors functions
+  *
+  *
+  @verbatim
+  ==============================================================================
+                      ##### DAC Peripheral features #####
+  ==============================================================================
+    [..]
+      *** DAC Channels ***
+      ====================
+    [..]
+    The device integrates two 12-bit Digital Analog Converters that can
+    be used independently or simultaneously (dual mode):
+      (#) DAC channel1 with DAC_OUT1 (PA4) as output
+      (#) DAC channel2 with DAC_OUT2 (PA5) as output
+
+      *** DAC Triggers ***
+      ====================
+    [..]
+    Digital to Analog conversion can be non-triggered using DAC_TRIGGER_NONE
+    and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register.
+    [..]
+    Digital to Analog conversion can be triggered by:
+      (#) External event: EXTI Line 9 (any GPIOx_Pin9) using DAC_TRIGGER_EXT_IT9.
+          The used pin (GPIOx_Pin9) must be configured in input mode.
+
+      (#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8
+          (DAC_TRIGGER_T2_TRGO, DAC_TRIGGER_T4_TRGO...)
+
+      (#) Software using DAC_TRIGGER_SOFTWARE
+
+      *** DAC Buffer mode feature ***
+      ===============================
+      [..]
+      Each DAC channel integrates an output buffer that can be used to
+      reduce the output impedance, and to drive external loads directly
+      without having to add an external operational amplifier.
+      To enable, the output buffer use
+      sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+      [..]
+      (@) Refer to the device datasheet for more details about output
+          impedance value with and without output buffer.
+
+       *** DAC wave generation feature ***
+       ===================================
+       [..]
+       Both DAC channels can be used to generate
+         (#) Noise wave
+         (#) Triangle wave
+
+       *** DAC data format ***
+       =======================
+       [..]
+       The DAC data format can be:
+         (#) 8-bit right alignment using DAC_ALIGN_8B_R
+         (#) 12-bit left alignment using DAC_ALIGN_12B_L
+         (#) 12-bit right alignment using DAC_ALIGN_12B_R
+
+       *** DAC data value to voltage correspondence ***
+       ================================================
+       [..]
+       The analog output voltage on each DAC channel pin is determined
+       by the following equation:
+       DAC_OUTx = VREF+ * DOR / 4095
+       with  DOR is the Data Output Register
+          VEF+ is the input voltage reference (refer to the device datasheet)
+        e.g. To set DAC_OUT1 to 0.7V, use
+          Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V
+
+       *** DMA requests  ***
+       =====================
+       [..]
+       A DMA1 request can be generated when an external trigger (but not
+       a software trigger) occurs if DMA1 requests are enabled using
+       HAL_DAC_Start_DMA()
+       [..]
+       DMA1 requests are mapped as following:
+         (#) DAC channel1 : mapped on DMA1 Stream5 channel7 which must be
+             already configured
+         (#) DAC channel2 : mapped on DMA1 Stream6 channel7 which must be
+             already configured
+
+    - at - For Dual mode and specific signal (Triangle and noise) generation please
+        refer to Extension Features Driver description
+
+
+                      ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      (+) DAC APB clock must be enabled to get write access to DAC
+          registers using HAL_DAC_Init()
+      (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode.
+      (+) Configure the DAC channel using HAL_DAC_ConfigChannel() function.
+      (+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA functions
+
+     *** Polling mode IO operation ***
+     =================================
+     [..]
+       (+) Start the DAC peripheral using HAL_DAC_Start()
+       (+) To read the DAC last data output value, use the HAL_DAC_GetValue() function.
+       (+) Stop the DAC peripheral using HAL_DAC_Stop()
+
+     *** DMA mode IO operation ***
+     ==============================
+     [..]
+       (+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length
+           of data to be transferred at each end of conversion
+       (+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1()or HAL_DAC_ConvCpltCallbackCh2()
+           function is executed and user can add his own code by customization of function pointer
+           HAL_DAC_ConvCpltCallbackCh1 or HAL_DAC_ConvCpltCallbackCh2
+       (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can
+            add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1
+       (+) Stop the DAC peripheral using HAL_DAC_Stop_DMA()
+
+     *** DAC HAL driver macros list ***
+     =============================================
+     [..]
+       Below the list of most used macros in DAC HAL driver.
+
+      (+) __HAL_DAC_ENABLE : Enable the DAC peripheral
+      (+) __HAL_DAC_DISABLE : Disable the DAC peripheral
+      (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags
+      (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status
+
+     [..]
+      (@) You can refer to the DAC HAL driver header file for more useful macros
+
+ @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DAC DAC
+  * @brief DAC driver modules
+  * @{
+  */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+	  defined(STM32F446xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup DAC_Private_Functions
+  * @{
+  */
+/* Private function prototypes -----------------------------------------------*/
+static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma);
+static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma);
+static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DAC_Exported_Functions DAC Exported Functions
+  * @{
+  */
+
+/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the DAC.
+      (+) De-initialize the DAC.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the DAC peripheral according to the specified parameters
+  *         in the DAC_InitStruct.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac)
+{
+  /* Check DAC handle */
+  if(hdac == NULL)
+  {
+     return HAL_ERROR;
+  }
+  /* Check the parameters */
+  assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
+
+  if(hdac->State == HAL_DAC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hdac->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_DAC_MspInit(hdac);
+  }
+
+  /* Initialize the DAC state*/
+  hdac->State = HAL_DAC_STATE_BUSY;
+
+  /* Set DAC error code to none */
+  hdac->ErrorCode = HAL_DAC_ERROR_NONE;
+
+  /* Initialize the DAC state*/
+  hdac->State = HAL_DAC_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deinitializes the DAC peripheral registers to their default reset values.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac)
+{
+  /* Check DAC handle */
+  if(hdac == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_BUSY;
+
+  /* DeInit the low level hardware */
+  HAL_DAC_MspDeInit(hdac);
+
+  /* Set DAC error code to none */
+  hdac->ErrorCode = HAL_DAC_ERROR_NONE;
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hdac);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DAC MSP.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the DAC MSP.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Exported_Functions_Group2 IO operation functions
+ *  @brief    IO operation functions
+ *
+ at verbatim
+  ==============================================================================
+             ##### IO operation functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Start conversion.
+      (+) Stop conversion.
+      (+) Start conversion and enable DMA transfer.
+      (+) Stop conversion and disable DMA transfer.
+      (+) Get result of conversion.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables DAC and starts conversion of channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+
+  /* Process locked */
+  __HAL_LOCK(hdac);
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_BUSY;
+
+  /* Enable the Peripheral */
+  __HAL_DAC_ENABLE(hdac, Channel);
+
+  if(Channel == DAC_CHANNEL_1)
+  {
+    tmp1 = hdac->Instance->CR & DAC_CR_TEN1;
+    tmp2 = hdac->Instance->CR & DAC_CR_TSEL1;
+    /* Check if software trigger enabled */
+    if((tmp1 ==  DAC_CR_TEN1) && (tmp2 ==  DAC_CR_TSEL1))
+    {
+      /* Enable the selected DAC software conversion */
+      hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1;
+    }
+  }
+  else
+  {
+    tmp1 = hdac->Instance->CR & DAC_CR_TEN2;
+    tmp2 = hdac->Instance->CR & DAC_CR_TSEL2;
+    /* Check if software trigger enabled */
+    if((tmp1 == DAC_CR_TEN2) && (tmp2 == DAC_CR_TSEL2))
+    {
+      /* Enable the selected DAC software conversion*/
+      hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG2;
+    }
+  }
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hdac);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables DAC and stop conversion of channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+
+  /* Disable the Peripheral */
+  __HAL_DAC_DISABLE(hdac, Channel);
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables DAC and starts conversion of channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @param  pData: The destination peripheral Buffer address.
+  * @param  Length: The length of data to be transferred from memory to DAC peripheral
+  * @param  Alignment: Specifies the data alignment for DAC channel.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+  *            @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+  *            @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+  assert_param(IS_DAC_ALIGN(Alignment));
+
+  /* Process locked */
+  __HAL_LOCK(hdac);
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_BUSY;
+
+  if(Channel == DAC_CHANNEL_1)
+  {
+    /* Set the DMA transfer complete callback for channel1 */
+    hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1;
+
+    /* Set the DMA half transfer complete callback for channel1 */
+    hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1;
+
+    /* Set the DMA error callback for channel1 */
+    hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1;
+
+    /* Enable the selected DAC channel1 DMA request */
+    hdac->Instance->CR |= DAC_CR_DMAEN1;
+
+    /* Case of use of channel 1 */
+    switch(Alignment)
+    {
+      case DAC_ALIGN_12B_R:
+        /* Get DHR12R1 address */
+        tmpreg = (uint32_t)&hdac->Instance->DHR12R1;
+        break;
+      case DAC_ALIGN_12B_L:
+        /* Get DHR12L1 address */
+        tmpreg = (uint32_t)&hdac->Instance->DHR12L1;
+        break;
+      case DAC_ALIGN_8B_R:
+        /* Get DHR8R1 address */
+        tmpreg = (uint32_t)&hdac->Instance->DHR8R1;
+        break;
+      default:
+        break;
+    }
+  }
+  else
+  {
+    /* Set the DMA transfer complete callback for channel2 */
+    hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2;
+
+    /* Set the DMA half transfer complete callback for channel2 */
+    hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2;
+
+    /* Set the DMA error callback for channel2 */
+    hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2;
+
+    /* Enable the selected DAC channel2 DMA request */
+    hdac->Instance->CR |= DAC_CR_DMAEN2;
+
+    /* Case of use of channel 2 */
+    switch(Alignment)
+    {
+      case DAC_ALIGN_12B_R:
+        /* Get DHR12R2 address */
+        tmpreg = (uint32_t)&hdac->Instance->DHR12R2;
+        break;
+      case DAC_ALIGN_12B_L:
+        /* Get DHR12L2 address */
+        tmpreg = (uint32_t)&hdac->Instance->DHR12L2;
+        break;
+      case DAC_ALIGN_8B_R:
+        /* Get DHR8R2 address */
+        tmpreg = (uint32_t)&hdac->Instance->DHR8R2;
+        break;
+      default:
+        break;
+    }
+  }
+
+  /* Enable the DMA Stream */
+  if(Channel == DAC_CHANNEL_1)
+  {
+    /* Enable the DAC DMA underrun interrupt */
+    __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
+
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
+  }
+  else
+  {
+    /* Enable the DAC DMA underrun interrupt */
+    __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2);
+
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_DAC_ENABLE(hdac, Channel);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdac);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables DAC and stop conversion of channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+
+  /* Disable the selected DAC channel DMA request */
+   hdac->Instance->CR &= ~(DAC_CR_DMAEN1 << Channel);
+
+  /* Disable the Peripheral */
+  __HAL_DAC_DISABLE(hdac, Channel);
+
+  /* Disable the DMA Channel */
+  /* Channel1 is used */
+  if(Channel == DAC_CHANNEL_1)
+  {
+    status = HAL_DMA_Abort(hdac->DMA_Handle1);
+  }
+  else /* Channel2 is used for */
+  {
+    status = HAL_DMA_Abort(hdac->DMA_Handle2);
+  }
+
+  /* Check if DMA Channel effectively disabled */
+  if(status != HAL_OK)
+  {
+    /* Update DAC state machine to error */
+    hdac->State = HAL_DAC_STATE_ERROR;
+  }
+  else
+  {
+    /* Change DAC state */
+    hdac->State = HAL_DAC_STATE_READY;
+  }
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  Returns the last data output value of the selected DAC channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @retval The selected DAC channel data output value.
+  */
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+
+  /* Returns the DAC channel data output register value */
+  if(Channel == DAC_CHANNEL_1)
+  {
+    return hdac->Instance->DOR1;
+  }
+  else
+  {
+    return hdac->Instance->DOR2;
+  }
+}
+
+/**
+  * @brief  Handles DAC interrupt request
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac)
+{
+  /* Check underrun channel 1 flag */
+  if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1))
+  {
+    /* Change DAC state to error state */
+    hdac->State = HAL_DAC_STATE_ERROR;
+
+    /* Set DAC error code to channel1 DMA underrun error */
+    hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH1;
+
+    /* Clear the underrun flag */
+    __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR1);
+
+    /* Disable the selected DAC channel1 DMA request */
+    hdac->Instance->CR &= ~DAC_CR_DMAEN1;
+
+    /* Error callback */
+    HAL_DAC_DMAUnderrunCallbackCh1(hdac);
+  }
+  /* Check underrun channel 2 flag */
+  if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR2))
+  {
+    /* Change DAC state to error state */
+    hdac->State = HAL_DAC_STATE_ERROR;
+
+    /* Set DAC error code to channel2 DMA underrun error */
+    hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH2;
+
+    /* Clear the underrun flag */
+    __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR2);
+
+    /* Disable the selected DAC channel1 DMA request */
+    hdac->Instance->CR &= ~DAC_CR_DMAEN2;
+
+    /* Error callback */
+    HAL_DACEx_DMAUnderrunCallbackCh2(hdac);
+  }
+}
+
+/**
+  * @brief  Conversion complete callback in non blocking mode for Channel1
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_ConvCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Conversion half DMA transfer callback in non blocking mode for Channel1
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Error DAC callback for Channel1.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_ErrorCallbackCh1 could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DMA underrun DAC callback for channel1.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief   	Peripheral Control functions
+ *
+ at verbatim
+  ==============================================================================
+             ##### Peripheral Control functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Configure channels.
+      (+) Set the specified data holding register value for DAC channel.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configures the selected DAC channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  sConfig: DAC configuration structure.
+  * @param  Channel: The selected DAC channel.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel)
+{
+  uint32_t tmpreg1 = 0, tmpreg2 = 0;
+
+  /* Check the DAC parameters */
+  assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
+  assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer));
+  assert_param(IS_DAC_CHANNEL(Channel));
+
+  /* Process locked */
+  __HAL_LOCK(hdac);
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_BUSY;
+
+  /* Get the DAC CR value */
+  tmpreg1 = hdac->Instance->CR;
+  /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
+  tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << Channel);
+  /* Configure for the selected DAC channel: buffer output, trigger */
+  /* Set TSELx and TENx bits according to DAC_Trigger value */
+  /* Set BOFFx bit according to DAC_OutputBuffer value */
+  tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer);
+  /* Calculate CR register value depending on DAC_Channel */
+  tmpreg1 |= tmpreg2 << Channel;
+  /* Write to DAC CR */
+  hdac->Instance->CR = tmpreg1;
+  /* Disable wave generation */
+  hdac->Instance->CR &= ~(DAC_CR_WAVE1 << Channel);
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hdac);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the specified data holding register value for DAC channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @param  Alignment: Specifies the data alignment.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+  *            @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+  *            @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+  * @param  Data: Data to be loaded in the selected data holding register.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data)
+{
+  __IO uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+  assert_param(IS_DAC_ALIGN(Alignment));
+  assert_param(IS_DAC_DATA(Data));
+
+  tmp = (uint32_t)hdac->Instance;
+  if(Channel == DAC_CHANNEL_1)
+  {
+    tmp += DAC_DHR12R1_ALIGNMENT(Alignment);
+  }
+  else
+  {
+    tmp += DAC_DHR12R2_ALIGNMENT(Alignment);
+  }
+
+  /* Set the DAC channel1 selected data holding register */
+  *(__IO uint32_t *) tmp = Data;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions
+ *  @brief   Peripheral State and Errors functions
+ *
+ at verbatim
+  ==============================================================================
+            ##### Peripheral State and Errors functions #####
+  ==============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Check the DAC state.
+      (+) Check the DAC Errors.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  return the DAC state
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval HAL state
+  */
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac)
+{
+  /* Return DAC state */
+  return hdac->State;
+}
+
+
+/**
+  * @brief  Return the DAC error code
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval DAC Error Code
+  */
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac)
+{
+  return hdac->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  DMA conversion complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma)
+{
+  DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_DAC_ConvCpltCallbackCh1(hdac);
+
+  hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+  * @brief  DMA half transfer complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma)
+{
+    DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+    /* Conversion complete callback */
+    HAL_DAC_ConvHalfCpltCallbackCh1(hdac);
+}
+
+/**
+  * @brief  DMA error callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma)
+{
+  DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Set DAC error code to DMA error */
+  hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
+
+  HAL_DAC_ErrorCallbackCh1(hdac);
+
+  hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+  * @}
+  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+          STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+          STM32F446xx
+        */
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c
new file mode 100644
index 0000000..7797a6d
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c
@@ -0,0 +1,382 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dac_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   DAC HAL module driver.
+  *         This file provides firmware functions to manage the following
+  *         functionalities of DAC extension peripheral:
+  *           + Extended features functions
+  *
+  *
+  @verbatim
+  ==============================================================================
+                      ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      (+) When Dual mode is enabled (i.e DAC Channel1 and Channel2 are used simultaneously) :
+          Use HAL_DACEx_DualGetValue() to get digital data to be converted and use
+          HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in Channel 1 and Channel 2.
+      (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal.
+      (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal.
+
+ @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DACEx DACEx
+  * @brief DAC driver modules
+  * @{
+  */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+	  defined(STM32F446xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DACEx_Exported_Functions DAC Exported Functions
+  * @{
+  */
+
+/** @defgroup DACEx_Exported_Functions_Group1 Extended features functions
+ *  @brief    Extended features functions
+ *
+ at verbatim
+  ==============================================================================
+                 ##### Extended features functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Start conversion.
+      (+) Stop conversion.
+      (+) Start conversion and enable DMA transfer.
+      (+) Stop conversion and disable DMA transfer.
+      (+) Get result of conversion.
+      (+) Get result of dual mode conversion.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the last data output value of the selected DAC channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval The selected DAC channel data output value.
+  */
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac)
+{
+  uint32_t tmp = 0;
+
+  tmp |= hdac->Instance->DOR1;
+
+  tmp |= hdac->Instance->DOR2 << 16;
+
+  /* Returns the DAC channel data output register value */
+  return tmp;
+}
+
+/**
+  * @brief  Enables or disables the selected DAC channel wave generation.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel.
+  *          This parameter can be one of the following values:
+  *            DAC_CHANNEL_1 / DAC_CHANNEL_2
+  * @param  Amplitude: Select max triangle amplitude.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1
+  *            @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3
+  *            @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7
+  *            @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15
+  *            @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31
+  *            @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63
+  *            @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127
+  *            @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255
+  *            @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511
+  *            @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023
+  *            @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047
+  *            @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+  assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
+
+  /* Process locked */
+  __HAL_LOCK(hdac);
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_BUSY;
+
+  /* Enable the selected wave generation for the selected DAC channel */
+  MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_1 | Amplitude) << Channel);
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hdac);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables or disables the selected DAC channel wave generation.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel.
+  *          This parameter can be one of the following values:
+  *            DAC_CHANNEL_1 / DAC_CHANNEL_2
+  * @param  Amplitude: Unmask DAC channel LFSR for noise wave generation.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+  assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
+
+  /* Process locked */
+  __HAL_LOCK(hdac);
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_BUSY;
+
+  /* Enable the selected wave generation for the selected DAC channel */
+  MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_0 | Amplitude) << Channel);
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hdac);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the specified data holding register value for dual DAC channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *               the configuration information for the specified DAC.
+  * @param  Alignment: Specifies the data alignment for dual channel DAC.
+  *          This parameter can be one of the following values:
+  *            DAC_ALIGN_8B_R: 8bit right data alignment selected
+  *            DAC_ALIGN_12B_L: 12bit left data alignment selected
+  *            DAC_ALIGN_12B_R: 12bit right data alignment selected
+  * @param  Data1: Data for DAC Channel2 to be loaded in the selected data holding register.
+  * @param  Data2: Data for DAC Channel1 to be loaded in the selected data  holding register.
+  * @note   In dual mode, a unique register access is required to write in both
+  *          DAC channels at the same time.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2)
+{
+  uint32_t data = 0, tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_DAC_ALIGN(Alignment));
+  assert_param(IS_DAC_DATA(Data1));
+  assert_param(IS_DAC_DATA(Data2));
+
+  /* Calculate and set dual DAC data holding register value */
+  if (Alignment == DAC_ALIGN_8B_R)
+  {
+    data = ((uint32_t)Data2 << 8) | Data1;
+  }
+  else
+  {
+    data = ((uint32_t)Data2 << 16) | Data1;
+  }
+
+  tmp = (uint32_t)hdac->Instance;
+  tmp += DAC_DHR12RD_ALIGNMENT(Alignment);
+
+  /* Set the dual DAC selected data holding register */
+  *(__IO uint32_t *)tmp = data;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  Conversion complete callback in non blocking mode for Channel2
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_ConvCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Conversion half DMA transfer callback in non blocking mode for Channel2
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_ConvHalfCpltCallbackCh2 could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Error DAC callback for Channel2.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DMA underrun DAC callback for channel2.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_DMAUnderrunCallbackCh2 could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DMA conversion complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma)
+{
+  DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_DACEx_ConvCpltCallbackCh2(hdac);
+
+  hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+  * @brief  DMA half transfer complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma)
+{
+    DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+    /* Conversion complete callback */
+    HAL_DACEx_ConvHalfCpltCallbackCh2(hdac);
+}
+
+/**
+  * @brief  DMA error callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma)
+{
+  DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Set DAC error code to DMA error */
+  hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
+
+  HAL_DACEx_ErrorCallbackCh2(hdac);
+
+  hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+  * @}
+  */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+          STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+          STM32F446xx
+        */
+
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c
new file mode 100644
index 0000000..7de37e7
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c
@@ -0,0 +1,830 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dcmi.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   DCMI HAL module driver
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Digital Camera Interface (DCMI) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State and Error functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+      The sequence below describes how to use this driver to capture image
+      from a camera module connected to the DCMI Interface.
+      This sequence does not take into account the configuration of the
+      camera module, which should be made before to configure and enable
+      the DCMI to capture images.
+
+    (#) Program the required configuration through following parameters:
+        horizontal and vertical polarity, pixel clock polarity, Capture Rate,
+        Synchronization Mode, code of the frame delimiter and data width
+        using HAL_DCMI_Init() function.
+
+    (#) Configure the DMA2_Stream1 channel1 to transfer Data from DCMI DR
+        register to the destination memory buffer.
+
+    (#) Program the required configuration through following parameters:
+        DCMI mode, destination memory Buffer address and the data length
+        and enable capture using HAL_DCMI_Start_DMA() function.
+
+    (#) Optionally, configure and Enable the CROP feature to select a rectangular
+        window from the received image using HAL_DCMI_ConfigCrop()
+        and HAL_DCMI_EnableCROP() functions
+
+    (#) The capture can be stopped using HAL_DCMI_Stop() function.
+
+    (#) To control DCMI state you can use the function HAL_DCMI_GetState().
+
+     *** DCMI HAL driver macros list ***
+     =============================================
+     [..]
+       Below the list of most used macros in DCMI HAL driver.
+
+      (+) __HAL_DCMI_ENABLE: Enable the DCMI peripheral.
+      (+) __HAL_DCMI_DISABLE: Disable the DCMI peripheral.
+      (+) __HAL_DCMI_GET_FLAG: Get the DCMI pending flags.
+      (+) __HAL_DCMI_CLEAR_FLAG: Clear the DCMI pending flags.
+      (+) __HAL_DCMI_ENABLE_IT: Enable the specified DCMI interrupts.
+      (+) __HAL_DCMI_DISABLE_IT: Disable the specified DCMI interrupts.
+      (+) __HAL_DCMI_GET_IT_SOURCE: Check whether the specified DCMI interrupt has occurred or not.
+
+     [..]
+       (@) You can refer to the DCMI HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+/** @defgroup DCMI DCMI
+  * @brief DCMI HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+    defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define HAL_TIMEOUT_DCMI_STOP    ((uint32_t)1000)  /* 1s  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void       DCMI_DMAConvCplt(DMA_HandleTypeDef *hdma);
+static void       DCMI_DMAError(DMA_HandleTypeDef *hdma);
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DCMI_Exported_Functions DCMI Exported Functions
+  * @{
+  */
+
+/** @defgroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions
+ *  @brief   Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+                ##### Initialization and Configuration functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the DCMI
+      (+) De-initialize the DCMI
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the DCMI according to the specified
+  *         parameters in the DCMI_InitTypeDef and create the associated handle.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi)
+{
+  /* Check the DCMI peripheral state */
+  if(hdcmi == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Check function parameters */
+  assert_param(IS_DCMI_ALL_INSTANCE(hdcmi->Instance));
+  assert_param(IS_DCMI_PCKPOLARITY(hdcmi->Init.PCKPolarity));
+  assert_param(IS_DCMI_VSPOLARITY(hdcmi->Init.VSPolarity));
+  assert_param(IS_DCMI_HSPOLARITY(hdcmi->Init.HSPolarity));
+  assert_param(IS_DCMI_SYNCHRO(hdcmi->Init.SynchroMode));
+  assert_param(IS_DCMI_CAPTURE_RATE(hdcmi->Init.CaptureRate));
+  assert_param(IS_DCMI_EXTENDED_DATA(hdcmi->Init.ExtendedDataMode));
+  assert_param(IS_DCMI_MODE_JPEG(hdcmi->Init.JPEGMode));
+
+  if(hdcmi->State == HAL_DCMI_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hdcmi->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_DCMI_MspInit(hdcmi);
+  }
+
+  /* Change the DCMI state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY;
+  /* Configures the HS, VS, DE and PC polarity */
+  hdcmi->Instance->CR &= ~(DCMI_CR_PCKPOL | DCMI_CR_HSPOL  | DCMI_CR_VSPOL  | DCMI_CR_EDM_0 |
+                           DCMI_CR_EDM_1  | DCMI_CR_FCRC_0 | DCMI_CR_FCRC_1 | DCMI_CR_JPEG  |
+                           DCMI_CR_ESS);
+  hdcmi->Instance->CR |=  (uint32_t)(hdcmi->Init.SynchroMode | hdcmi->Init.CaptureRate | \
+                                     hdcmi->Init.VSPolarity  | hdcmi->Init.HSPolarity  | \
+                                     hdcmi->Init.PCKPolarity | hdcmi->Init.ExtendedDataMode | \
+                                     hdcmi->Init.JPEGMode);
+
+  if(hdcmi->Init.SynchroMode == DCMI_SYNCHRO_EMBEDDED)
+  {
+    DCMI->ESCR = (((uint32_t)hdcmi->Init.SyncroCode.FrameStartCode)    |
+                  ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode << 8)|
+                  ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode << 16) |
+                  ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode << 24));
+
+  }
+
+  /* Enable the Line interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE);
+
+  /* Enable the VSYNC interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_VSYNC);
+
+  /* Enable the Frame capture complete interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_FRAME);
+
+  /* Enable the Synchronization error interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_ERR);
+
+  /* Enable the Overflow interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_OVF);
+
+  /* Enable DCMI by setting DCMIEN bit */
+  __HAL_DCMI_ENABLE(hdcmi);
+
+  /* Update error code */
+  hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
+
+  /* Initialize the DCMI state*/
+  hdcmi->State  = HAL_DCMI_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deinitializes the DCMI peripheral registers to their default reset
+  *         values.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi)
+{
+  /* DeInit the low level hardware */
+  HAL_DCMI_MspDeInit(hdcmi);
+
+  /* Update error code */
+  hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
+
+  /* Initialize the DCMI state*/
+  hdcmi->State = HAL_DCMI_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hdcmi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DCMI MSP.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval None
+  */
+__weak void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DCMI_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the DCMI MSP.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval None
+  */
+__weak void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DCMI_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+/** @defgroup DCMI_Exported_Functions_Group2 IO operation functions
+ *  @brief   IO operation functions
+ *
+ at verbatim
+ ===============================================================================
+                      #####  IO operation functions  #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Configure destination address and data length and
+          Enables DCMI DMA request and enables DCMI capture
+      (+) Stop the DCMI capture.
+      (+) Handles DCMI interrupt request.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables DCMI DMA request and enables DCMI capture
+  * @param  hdcmi:     pointer to a DCMI_HandleTypeDef structure that contains
+  *                    the configuration information for DCMI.
+  * @param  DCMI_Mode: DCMI capture mode snapshot or continuous grab.
+  * @param  pData:     The destination memory Buffer address (LCD Frame buffer).
+  * @param  Length:    The length of capture to be transferred.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length)
+{
+  /* Initialize the second memory address */
+  uint32_t SecondMemAddress = 0;
+
+  /* Check function parameters */
+  assert_param(IS_DCMI_CAPTURE_MODE(DCMI_Mode));
+
+  /* Process Locked */
+  __HAL_LOCK(hdcmi);
+
+  /* Lock the DCMI peripheral state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DCMI_CAPTURE_MODE(DCMI_Mode));
+
+  /* Configure the DCMI Mode */
+  hdcmi->Instance->CR &= ~(DCMI_CR_CM);
+  hdcmi->Instance->CR |=  (uint32_t)(DCMI_Mode);
+
+  /* Set the DMA memory0 conversion complete callback */
+  hdcmi->DMA_Handle->XferCpltCallback = DCMI_DMAConvCplt;
+
+  /* Set the DMA error callback */
+  hdcmi->DMA_Handle->XferErrorCallback = DCMI_DMAError;
+
+  if(Length <= 0xFFFF)
+  {
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hdcmi->DMA_Handle, (uint32_t)&hdcmi->Instance->DR, (uint32_t)pData, Length);
+  }
+  else /* DCMI_DOUBLE_BUFFER Mode */
+  {
+    /* Set the DMA memory1 conversion complete callback */
+    hdcmi->DMA_Handle->XferM1CpltCallback = DCMI_DMAConvCplt;
+
+    /* Initialize transfer parameters */
+    hdcmi->XferCount = 1;
+    hdcmi->XferSize = Length;
+    hdcmi->pBuffPtr = pData;
+
+    /* Get the number of buffer */
+    while(hdcmi->XferSize > 0xFFFF)
+    {
+      hdcmi->XferSize = (hdcmi->XferSize/2);
+      hdcmi->XferCount = hdcmi->XferCount*2;
+    }
+
+    /* Update DCMI counter  and transfer number*/
+    hdcmi->XferCount = (hdcmi->XferCount - 2);
+    hdcmi->XferTransferNumber = hdcmi->XferCount;
+
+    /* Update second memory address */
+    SecondMemAddress = (uint32_t)(pData + (4*hdcmi->XferSize));
+
+    /* Start DMA multi buffer transfer */
+    HAL_DMAEx_MultiBufferStart_IT(hdcmi->DMA_Handle, (uint32_t)&hdcmi->Instance->DR, (uint32_t)pData, SecondMemAddress, hdcmi->XferSize);
+  }
+
+  /* Enable Capture */
+  DCMI->CR |= DCMI_CR_CAPTURE;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable DCMI DMA request and Disable DCMI capture
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi)
+{
+  uint32_t tickstart = 0;
+
+  /* Lock the DCMI peripheral state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+  __HAL_DCMI_DISABLE(hdcmi);
+
+  /* Disable Capture */
+  DCMI->CR &= ~(DCMI_CR_CAPTURE);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check if the DCMI capture effectively disabled */
+  while((hdcmi->Instance->CR & DCMI_CR_CAPTURE) != 0)
+  {
+    if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DCMI_STOP)
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdcmi);
+
+      /* Update error code */
+      hdcmi->ErrorCode |= HAL_DCMI_ERROR_TIMEOUT;
+
+      /* Change DCMI state */
+      hdcmi->State = HAL_DCMI_STATE_TIMEOUT;
+
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Disable the DMA */
+  HAL_DMA_Abort(hdcmi->DMA_Handle);
+
+  /* Update error code */
+  hdcmi->ErrorCode |= HAL_DCMI_ERROR_NONE;
+
+  /* Change DCMI state */
+  hdcmi->State = HAL_DCMI_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdcmi);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles DCMI interrupt request.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for the DCMI.
+  * @retval None
+  */
+void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi)
+{
+  /* Synchronization error interrupt management *******************************/
+  if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_ERRRI) != RESET)
+  {
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_ERR) != RESET)
+    {
+      /* Disable the Synchronization error interrupt */
+      __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_ERR);
+
+      /* Clear the Synchronization error flag */
+      __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_ERRRI);
+
+      /* Update error code */
+      hdcmi->ErrorCode |= HAL_DCMI_ERROR_SYNC;
+
+      /* Change DCMI state */
+      hdcmi->State = HAL_DCMI_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdcmi);
+
+      /* Abort the DMA Transfer */
+      HAL_DMA_Abort(hdcmi->DMA_Handle);
+
+      /* Synchronization error Callback */
+      HAL_DCMI_ErrorCallback(hdcmi);
+    }
+  }
+  /* Overflow interrupt management ********************************************/
+  if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_OVFRI) != RESET)
+  {
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_OVF) != RESET)
+    {
+      /* Disable the Overflow interrupt */
+      __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_OVF);
+
+      /* Clear the Overflow flag */
+      __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_OVFRI);
+
+      /* Update error code */
+      hdcmi->ErrorCode |= HAL_DCMI_ERROR_OVF;
+
+      /* Change DCMI state */
+      hdcmi->State = HAL_DCMI_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdcmi);
+
+      /* Abort the DMA Transfer */
+      HAL_DMA_Abort(hdcmi->DMA_Handle);
+
+      /* Overflow Callback */
+      HAL_DCMI_ErrorCallback(hdcmi);
+    }
+  }
+  /* Line Interrupt management ************************************************/
+  if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_LINERI) != RESET)
+  {
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_LINE) != RESET)
+    {
+      /* Clear the Line interrupt flag */
+      __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_LINERI);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdcmi);
+
+      /* Line interrupt Callback */
+      HAL_DCMI_LineEventCallback(hdcmi);
+    }
+  }
+  /* VSYNC interrupt management ***********************************************/
+  if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_VSYNCRI) != RESET)
+  {
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_VSYNC) != RESET)
+    {
+      /* Disable the VSYNC interrupt */
+      __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_VSYNC);
+
+      /* Clear the VSYNC flag */
+      __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_VSYNCRI);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdcmi);
+
+      /* VSYNC Callback */
+      HAL_DCMI_VsyncEventCallback(hdcmi);
+    }
+  }
+  /* End of Frame interrupt management ****************************************/
+  if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_FRAMERI) != RESET)
+  {
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_FRAME) != RESET)
+    {
+      /* Disable the End of Frame interrupt */
+      __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_FRAME);
+
+      /* Clear the End of Frame flag */
+      __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_FRAMERI);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdcmi);
+
+      /* End of Frame Callback */
+      HAL_DCMI_FrameEventCallback(hdcmi);
+    }
+  }
+}
+
+/**
+  * @brief  Error DCMI callback.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval None
+  */
+__weak void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DCMI_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Line Event callback.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval None
+  */
+__weak void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DCMI_LineEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  VSYNC Event callback.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval None
+  */
+__weak void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DCMI_VsyncEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Frame Event callback.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval None
+  */
+__weak void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DCMI_FrameEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief    Peripheral Control functions
+ *
+ at verbatim
+ ===============================================================================
+                    ##### Peripheral Control functions #####
+ ===============================================================================
+[..]  This section provides functions allowing to:
+      (+) Configure the CROP feature.
+      (+) Enable/Disable the CROP feature.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configure the DCMI CROP coordinate.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @param  YSize: DCMI Line number
+  * @param  XSize: DCMI Pixel per line
+  * @param  X0:    DCMI window X offset
+  * @param  Y0:    DCMI window Y offset
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize)
+{
+  /* Process Locked */
+  __HAL_LOCK(hdcmi);
+
+  /* Lock the DCMI peripheral state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DCMI_WINDOW_COORDINATE(X0));
+  assert_param(IS_DCMI_WINDOW_COORDINATE(YSize));
+  assert_param(IS_DCMI_WINDOW_COORDINATE(XSize));
+  assert_param(IS_DCMI_WINDOW_HEIGHT(Y0));
+
+  /* Configure CROP */
+  DCMI->CWSIZER = (XSize | (YSize << 16));
+  DCMI->CWSTRTR = (X0 | (Y0 << 16));
+
+  /* Initialize the DCMI state*/
+  hdcmi->State  = HAL_DCMI_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdcmi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the Crop feature.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi)
+{
+  /* Process Locked */
+  __HAL_LOCK(hdcmi);
+
+  /* Lock the DCMI peripheral state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+  /* Disable DCMI Crop feature */
+  DCMI->CR &= ~(uint32_t)DCMI_CR_CROP;
+
+  /* Change the DCMI state*/
+  hdcmi->State = HAL_DCMI_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdcmi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enable the Crop feature.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi)
+{
+  /* Process Locked */
+  __HAL_LOCK(hdcmi);
+
+  /* Lock the DCMI peripheral state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+  /* Enable DCMI Crop feature */
+  DCMI->CR |= (uint32_t)DCMI_CR_CROP;
+
+  /* Change the DCMI state*/
+  hdcmi->State = HAL_DCMI_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdcmi);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Exported_Functions_Group4 Peripheral State functions
+ *  @brief    Peripheral State functions
+ *
+ at verbatim
+ ===============================================================================
+               ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Check the DCMI state.
+      (+) Get the specific DCMI error flag.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the DCMI state
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL state
+  */
+HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi)
+{
+  return hdcmi->State;
+}
+
+/**
+* @brief  Return the DCMI error code
+* @param  hdcmi : pointer to a DCMI_HandleTypeDef structure that contains
+  *               the configuration information for DCMI.
+* @retval DCMI Error Code
+*/
+uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi)
+{
+  return hdcmi->ErrorCode;
+}
+
+/**
+  * @}
+  */
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DCMI_Private_Functions DCMI Private Functions
+  * @{
+  */
+
+  /**
+  * @brief  DMA conversion complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void DCMI_DMAConvCplt(DMA_HandleTypeDef *hdma)
+{
+  uint32_t tmp = 0;
+
+  DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hdcmi->State= HAL_DCMI_STATE_READY;
+
+  if(hdcmi->XferCount != 0)
+  {
+    /* Update memory 0 address location */
+    tmp = ((hdcmi->DMA_Handle->Instance->CR) & DMA_SxCR_CT);
+    if(((hdcmi->XferCount % 2) == 0) && (tmp != 0))
+    {
+      tmp = hdcmi->DMA_Handle->Instance->M0AR;
+      HAL_DMAEx_ChangeMemory(hdcmi->DMA_Handle, (tmp + (8*hdcmi->XferSize)), MEMORY0);
+      hdcmi->XferCount--;
+    }
+    /* Update memory 1 address location */
+    else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) == 0)
+    {
+      tmp = hdcmi->DMA_Handle->Instance->M1AR;
+      HAL_DMAEx_ChangeMemory(hdcmi->DMA_Handle, (tmp + (8*hdcmi->XferSize)), MEMORY1);
+      hdcmi->XferCount--;
+    }
+  }
+  /* Update memory 0 address location */
+  else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) != 0)
+  {
+    hdcmi->DMA_Handle->Instance->M0AR = hdcmi->pBuffPtr;
+  }
+  /* Update memory 1 address location */
+  else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) == 0)
+  {
+    tmp = hdcmi->pBuffPtr;
+    hdcmi->DMA_Handle->Instance->M1AR = (tmp + (4*hdcmi->XferSize));
+    hdcmi->XferCount = hdcmi->XferTransferNumber;
+  }
+
+  if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_FRAMERI) != RESET)
+  {
+    /* Process Unlocked */
+    __HAL_UNLOCK(hdcmi);
+
+    /* FRAME Callback */
+    HAL_DCMI_FrameEventCallback(hdcmi);
+  }
+}
+
+/**
+  * @brief  DMA error callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void DCMI_DMAError(DMA_HandleTypeDef *hdma)
+{
+    DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+    hdcmi->State= HAL_DCMI_STATE_READY;
+    HAL_DCMI_ErrorCallback(hdcmi);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+          STM32F429xx || STM32F439xx || STM32F446xx */
+#endif /* HAL_DCMI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi_ex.c
new file mode 100644
index 0000000..2f9f23d
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi_ex.c
@@ -0,0 +1,212 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dcmi_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   DCMI Extension HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of DCMI extension peripheral:
+  *           + Extension features functions
+  *
+  @verbatim
+  ==============================================================================
+               ##### DCMI peripheral extension features  #####
+  ==============================================================================
+
+  [..] Comparing to other previous devices, the DCMI interface for STM32F446xx
+       devices contains the following additional features :
+
+       (+) Support of Black and White cameras
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..] This driver provides functions to manage the Black and White feature
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+/** @defgroup DCMI DCMI
+  * @brief DCMI HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)  || defined(STM32F446xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DCMIEx_Exported_Functions DCMI Extended Exported Functions
+  * @{
+  */
+
+/** @defgroup DCMIEx_Exported_Functions_Group1 Initialization and Configuration functions
+ *  @brief   Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+                ##### Initialization and Configuration functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the DCMI
+      (+) De-initialize the DCMI
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the DCMI according to the specified
+  *         parameters in the DCMI_InitTypeDef and create the associated handle.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi)
+{
+  /* Check the DCMI peripheral state */
+  if(hdcmi == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Check function parameters */
+  assert_param(IS_DCMI_ALL_INSTANCE(hdcmi->Instance));
+  assert_param(IS_DCMI_PCKPOLARITY(hdcmi->Init.PCKPolarity));
+  assert_param(IS_DCMI_VSPOLARITY(hdcmi->Init.VSPolarity));
+  assert_param(IS_DCMI_HSPOLARITY(hdcmi->Init.HSPolarity));
+  assert_param(IS_DCMI_SYNCHRO(hdcmi->Init.SynchroMode));
+  assert_param(IS_DCMI_CAPTURE_RATE(hdcmi->Init.CaptureRate));
+  assert_param(IS_DCMI_EXTENDED_DATA(hdcmi->Init.ExtendedDataMode));
+  assert_param(IS_DCMI_MODE_JPEG(hdcmi->Init.JPEGMode));
+#if defined(STM32F446xx)
+  assert_param(IS_DCMI_BYTE_SELECT_MODE(hdcmi->Init.ByteSelectMode));
+  assert_param(IS_DCMI_BYTE_SELECT_START(hdcmi->Init.ByteSelectStart));
+  assert_param(IS_DCMI_LINE_SELECT_MODE(hdcmi->Init.LineSelectMode));
+  assert_param(IS_DCMI_LINE_SELECT_START(hdcmi->Init.LineSelectStart));
+#endif
+  if(hdcmi->State == HAL_DCMI_STATE_RESET)
+  {
+    /* Init the low level hardware */
+    HAL_DCMI_MspInit(hdcmi);
+  }
+
+  /* Change the DCMI state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY;
+                          /* Configures the HS, VS, DE and PC polarity */
+  hdcmi->Instance->CR &= ~(DCMI_CR_PCKPOL | DCMI_CR_HSPOL  | DCMI_CR_VSPOL  | DCMI_CR_EDM_0 |\
+                           DCMI_CR_EDM_1  | DCMI_CR_FCRC_0 | DCMI_CR_FCRC_1 | DCMI_CR_JPEG  |\
+                           DCMI_CR_ESS
+#if defined(STM32F446xx)
+                           | DCMI_CR_BSM_0 | DCMI_CR_BSM_1 | DCMI_CR_OEBS |\
+                           DCMI_CR_LSM | DCMI_CR_OELS
+#endif
+                           );
+  hdcmi->Instance->CR |=  (uint32_t)(hdcmi->Init.SynchroMode | hdcmi->Init.CaptureRate |\
+                                     hdcmi->Init.VSPolarity  | hdcmi->Init.HSPolarity  |\
+                                     hdcmi->Init.PCKPolarity | hdcmi->Init.ExtendedDataMode |\
+                                     hdcmi->Init.JPEGMode
+#if defined(STM32F446xx)
+                                     | hdcmi->Init.ByteSelectMode |\
+                                     hdcmi->Init.ByteSelectStart | hdcmi->Init.LineSelectMode |\
+                                     hdcmi->Init.LineSelectStart
+#endif
+                                     );
+  if(hdcmi->Init.SynchroMode == DCMI_SYNCHRO_EMBEDDED)
+  {
+    DCMI->ESCR = (((uint32_t)hdcmi->Init.SyncroCode.FrameStartCode)    |
+                  ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode << 8)|
+                  ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode << 16) |
+                  ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode << 24));
+
+  }
+
+  /* Enable the Line interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE);
+
+  /* Enable the VSYNC interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_VSYNC);
+
+  /* Enable the Frame capture complete interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_FRAME);
+
+  /* Enable the Synchronization error interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_ERR);
+
+  /* Enable the Overflow interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_OVF);
+
+  /* Enable DCMI by setting DCMIEN bit */
+  __HAL_DCMI_ENABLE(hdcmi);
+
+  /* Update error code */
+  hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
+
+  /* Initialize the DCMI state*/
+  hdcmi->State  = HAL_DCMI_STATE_READY;
+
+  return HAL_OK;
+}
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx  || STM32F446xx */
+#endif /* HAL_DCMI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c
new file mode 100644
index 0000000..420e678
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c
@@ -0,0 +1,928 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dma.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   DMA HAL module driver.
+  *
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Direct Memory Access (DMA) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State and errors functions
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+   (#) Enable and configure the peripheral to be connected to the DMA Stream
+       (except for internal SRAM/FLASH memories: no initialization is
+       necessary) please refer to Reference manual for connection between peripherals
+       and DMA requests .
+
+   (#) For a given Stream, program the required configuration through the following parameters:
+       Transfer Direction, Source and Destination data formats,
+       Circular, Normal or peripheral flow control mode, Stream Priority level,
+       Source and Destination Increment mode, FIFO mode and its Threshold (if needed),
+       Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function.
+
+     *** Polling mode IO operation ***
+     =================================
+    [..]
+          (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
+              address and destination address and the Length of data to be transferred
+          (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
+              case a fixed Timeout can be configured by User depending from his application.
+
+     *** Interrupt mode IO operation ***
+     ===================================
+    [..]
+          (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
+          (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
+          (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
+              Source address and destination address and the Length of data to be transferred. In this
+              case the DMA interrupt is configured
+          (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
+          (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
+              add his own function by customization of function pointer XferCpltCallback and
+              XferErrorCallback (i.e a member of DMA handle structure).
+    [..]
+     (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
+         detection.
+
+     (#) Use HAL_DMA_Abort() function to abort the current transfer
+
+     - at -   In Memory-to-Memory transfer mode, Circular mode is not allowed.
+
+     - at -   The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is
+           possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set
+           Half-Word data size for the peripheral to access its data register and set Word data size
+           for the Memory to gain in access time. Each two half words will be packed and written in
+           a single access to a Word in the Memory).
+
+     - at -   When FIFO is disabled, it is not allowed to configure different Data Sizes for Source
+           and Destination. In this case the Peripheral Data Size will be applied to both Source
+           and Destination.
+
+     *** DMA HAL driver macros list ***
+     =============================================
+     [..]
+       Below the list of most used macros in DMA HAL driver.
+
+      (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream.
+      (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream.
+      (+) __HAL_DMA_GET_FS: Return the current DMA Stream FIFO filled level.
+      (+) __HAL_DMA_GET_FLAG: Get the DMA Stream pending flags.
+      (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Stream pending flags.
+      (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Stream interrupts.
+      (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Stream interrupts.
+      (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not.
+
+     [..]
+      (@) You can refer to the DMA HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DMA DMA
+  * @brief DMA HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup DMA_Private_Constants
+ * @{
+ */
+ #define HAL_TIMEOUT_DMA_ABORT    ((uint32_t)1000)  /* 1s */
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DMA_Private_Functions
+  * @{
+  */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group1
+  *
+ at verbatim
+ ===============================================================================
+             ##### Initialization and de-initialization functions  #####
+ ===============================================================================
+    [..]
+    This section provides functions allowing to initialize the DMA Stream source
+    and destination addresses, incrementation and data sizes, transfer direction,
+    circular/normal mode selection, memory-to-memory mode selection and Stream priority value.
+    [..]
+    The HAL_DMA_Init() function follows the DMA configuration procedures as described in
+    reference manual.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the DMA according to the specified
+  *         parameters in the DMA_InitTypeDef and create the associated handle.
+  * @param  hdma: Pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Stream.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
+{
+  uint32_t tmp = 0;
+
+  /* Check the DMA peripheral state */
+  if(hdma == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+  assert_param(IS_DMA_CHANNEL(hdma->Init.Channel));
+  assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
+  assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
+  assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
+  assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
+  assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
+  assert_param(IS_DMA_MODE(hdma->Init.Mode));
+  assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
+  assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode));
+  /* Check the memory burst, peripheral burst and FIFO threshold parameters only
+     when FIFO mode is enabled */
+  if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE)
+  {
+    assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold));
+    assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst));
+    assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst));
+  }
+
+  /* Change DMA peripheral state */
+  hdma->State = HAL_DMA_STATE_BUSY;
+
+  /* Get the CR register value */
+  tmp = hdma->Instance->CR;
+
+  /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */
+  tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \
+                      DMA_SxCR_PL    | DMA_SxCR_MSIZE  | DMA_SxCR_PSIZE  | \
+                      DMA_SxCR_MINC  | DMA_SxCR_PINC   | DMA_SxCR_CIRC   | \
+                      DMA_SxCR_DIR   | DMA_SxCR_CT     | DMA_SxCR_DBM));
+
+  /* Prepare the DMA Stream configuration */
+  tmp |=  hdma->Init.Channel             | hdma->Init.Direction        |
+          hdma->Init.PeriphInc           | hdma->Init.MemInc           |
+          hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
+          hdma->Init.Mode                | hdma->Init.Priority;
+
+  /* the Memory burst and peripheral burst are not used when the FIFO is disabled */
+  if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
+  {
+    /* Get memory burst and peripheral burst */
+    tmp |=  hdma->Init.MemBurst | hdma->Init.PeriphBurst;
+  }
+
+  /* Write to DMA Stream CR register */
+  hdma->Instance->CR = tmp;
+
+  /* Get the FCR register value */
+  tmp = hdma->Instance->FCR;
+
+  /* Clear Direct mode and FIFO threshold bits */
+  tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH);
+
+  /* Prepare the DMA Stream FIFO configuration */
+  tmp |= hdma->Init.FIFOMode;
+
+  /* the FIFO threshold is not used when the FIFO mode is disabled */
+  if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
+  {
+    /* Get the FIFO threshold */
+    tmp |= hdma->Init.FIFOThreshold;
+  }
+
+  /* Write to DMA Stream FCR */
+  hdma->Instance->FCR = tmp;
+
+  /* Initialize the error code */
+  hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+  /* Initialize the DMA state */
+  hdma->State = HAL_DMA_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the DMA peripheral
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Stream.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
+{
+  /* Check the DMA peripheral state */
+  if(hdma == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the DMA peripheral state */
+  if(hdma->State == HAL_DMA_STATE_BUSY)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Disable the selected DMA Streamx */
+  __HAL_DMA_DISABLE(hdma);
+
+  /* Reset DMA Streamx control register */
+  hdma->Instance->CR   = 0;
+
+  /* Reset DMA Streamx number of data to transfer register */
+  hdma->Instance->NDTR = 0;
+
+  /* Reset DMA Streamx peripheral address register */
+  hdma->Instance->PAR  = 0;
+
+  /* Reset DMA Streamx memory 0 address register */
+  hdma->Instance->M0AR = 0;
+
+  /* Reset DMA Streamx memory 1 address register */
+  hdma->Instance->M1AR = 0;
+
+  /* Reset DMA Streamx FIFO control register */
+  hdma->Instance->FCR  = (uint32_t)0x00000021;
+
+  /* Clear all flags */
+  __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
+  __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
+  __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
+  __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
+  __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+
+  /* Initialize the error code */
+  hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+  /* Initialize the DMA state */
+  hdma->State = HAL_DMA_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hdma);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group2
+  *
+ at verbatim
+ ===============================================================================
+                      #####  IO operation functions  #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Configure the source, destination address and data length and Start DMA transfer
+      (+) Configure the source, destination address and data length and
+          Start DMA transfer with interrupt
+      (+) Abort DMA transfer
+      (+) Poll for transfer complete
+      (+) Handle DMA interrupt request
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the DMA Transfer.
+  * @param  hdma      : pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma);
+
+  /* Change DMA peripheral state */
+  hdma->State = HAL_DMA_STATE_BUSY;
+
+   /* Check the parameters */
+  assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+  /* Disable the peripheral */
+  __HAL_DMA_DISABLE(hdma);
+
+  /* Configure the source, destination address and the data length */
+  DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+  /* Enable the Peripheral */
+  __HAL_DMA_ENABLE(hdma);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Start the DMA Transfer with interrupt enabled.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma);
+
+  /* Change DMA peripheral state */
+  hdma->State = HAL_DMA_STATE_BUSY;
+
+   /* Check the parameters */
+  assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+  /* Disable the peripheral */
+  __HAL_DMA_DISABLE(hdma);
+
+  /* Configure the source, destination address and the data length */
+  DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+  /* Enable the transfer complete interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TC);
+
+  /* Enable the Half transfer complete interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_HT);
+
+  /* Enable the transfer Error interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TE);
+
+  /* Enable the FIFO Error interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_FE);
+
+  /* Enable the direct mode Error interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_DME);
+
+   /* Enable the Peripheral */
+  __HAL_DMA_ENABLE(hdma);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Aborts the DMA Transfer.
+  * @param  hdma  : pointer to a DMA_HandleTypeDef structure that contains
+  *                 the configuration information for the specified DMA Stream.
+  *
+  * @note  After disabling a DMA Stream, a check for wait until the DMA Stream is
+  *        effectively disabled is added. If a Stream is disabled
+  *        while a data transfer is ongoing, the current data will be transferred
+  *        and the Stream will be effectively disabled only after the transfer of
+  *        this single data is finished.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
+{
+  uint32_t tickstart = 0;
+
+  /* Disable the stream */
+  __HAL_DMA_DISABLE(hdma);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check if the DMA Stream is effectively disabled */
+  while((hdma->Instance->CR & DMA_SxCR_EN) != 0)
+  {
+    /* Check for the Timeout */
+    if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
+    {
+      /* Update error code */
+      hdma->ErrorCode |= HAL_DMA_ERROR_TIMEOUT;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma);
+
+      /* Change the DMA state */
+      hdma->State = HAL_DMA_STATE_TIMEOUT;
+
+      return HAL_TIMEOUT;
+    }
+  }
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdma);
+
+  /* Change the DMA state*/
+  hdma->State = HAL_DMA_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Polling for transfer complete.
+  * @param  hdma:          pointer to a DMA_HandleTypeDef structure that contains
+  *                        the configuration information for the specified DMA Stream.
+  * @param  CompleteLevel: Specifies the DMA level complete.
+  * @param  Timeout:       Timeout duration.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout)
+{
+  uint32_t temp, tmp, tmp1, tmp2;
+  uint32_t tickstart = 0;
+
+  /* Get the level transfer complete flag */
+  if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
+  {
+    /* Transfer Complete flag */
+    temp = __HAL_DMA_GET_TC_FLAG_INDEX(hdma);
+  }
+  else
+  {
+    /* Half Transfer Complete flag */
+    temp = __HAL_DMA_GET_HT_FLAG_INDEX(hdma);
+  }
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_DMA_GET_FLAG(hdma, temp) == RESET)
+  {
+    tmp  = __HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
+    tmp1 = __HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
+    tmp2 = __HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
+    if((tmp != RESET) || (tmp1 != RESET) || (tmp2 != RESET))
+    {
+      if(tmp != RESET)
+      {
+        /* Update error code */
+        hdma->ErrorCode |= HAL_DMA_ERROR_TE;
+
+        /* Clear the transfer error flag */
+        __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
+      }
+      if(tmp1 != RESET)
+      {
+        /* Update error code */
+        hdma->ErrorCode |= HAL_DMA_ERROR_FE;
+
+        /* Clear the FIFO error flag */
+        __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
+      }
+      if(tmp2 != RESET)
+      {
+        /* Update error code */
+        hdma->ErrorCode |= HAL_DMA_ERROR_DME;
+
+        /* Clear the Direct Mode error flag */
+        __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
+      }
+      /* Change the DMA state */
+      hdma->State= HAL_DMA_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma);
+
+      return HAL_ERROR;
+    }
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Update error code */
+        hdma->ErrorCode |= HAL_DMA_ERROR_TIMEOUT;
+
+        /* Change the DMA state */
+        hdma->State = HAL_DMA_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hdma);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
+  {
+    /* Multi_Buffering mode enabled */
+    if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
+    {
+      /* Clear the half transfer complete flag */
+      __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+      /* Clear the transfer complete flag */
+      __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
+
+      /* Current memory buffer used is Memory 0 */
+      if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
+      {
+        /* Change DMA peripheral state */
+        hdma->State = HAL_DMA_STATE_READY_MEM0;
+      }
+      /* Current memory buffer used is Memory 1 */
+      else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
+      {
+        /* Change DMA peripheral state */
+        hdma->State = HAL_DMA_STATE_READY_MEM1;
+      }
+    }
+    else
+    {
+      /* Clear the half transfer complete flag */
+      __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+      /* Clear the transfer complete flag */
+      __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
+
+      /* The selected Streamx EN bit is cleared (DMA is disabled and all transfers
+         are complete) */
+      hdma->State = HAL_DMA_STATE_READY_MEM0;
+    }
+    /* Process Unlocked */
+    __HAL_UNLOCK(hdma);
+  }
+  else
+  {
+    /* Multi_Buffering mode enabled */
+    if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
+    {
+      /* Clear the half transfer complete flag */
+      __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+
+      /* Current memory buffer used is Memory 0 */
+      if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
+      {
+        /* Change DMA peripheral state */
+        hdma->State = HAL_DMA_STATE_READY_HALF_MEM0;
+      }
+      /* Current memory buffer used is Memory 1 */
+      else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
+      {
+        /* Change DMA peripheral state */
+        hdma->State = HAL_DMA_STATE_READY_HALF_MEM1;
+      }
+    }
+    else
+    {
+      /* Clear the half transfer complete flag */
+      __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+
+      /* Change DMA peripheral state */
+      hdma->State = HAL_DMA_STATE_READY_HALF_MEM0;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles DMA interrupt request.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Stream.
+  * @retval None
+  */
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
+{
+  /* Transfer Error Interrupt management ***************************************/
+  if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)) != RESET)
+  {
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET)
+    {
+      /* Disable the transfer error interrupt */
+      __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE);
+
+      /* Clear the transfer error flag */
+      __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
+
+      /* Update error code */
+      hdma->ErrorCode |= HAL_DMA_ERROR_TE;
+
+      /* Change the DMA state */
+      hdma->State = HAL_DMA_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma);
+
+      if(hdma->XferErrorCallback != NULL)
+      {
+        /* Transfer error callback */
+        hdma->XferErrorCallback(hdma);
+      }
+    }
+  }
+  /* FIFO Error Interrupt management ******************************************/
+  if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma)) != RESET)
+  {
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET)
+    {
+      /* Disable the FIFO Error interrupt */
+      __HAL_DMA_DISABLE_IT(hdma, DMA_IT_FE);
+
+      /* Clear the FIFO error flag */
+      __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
+
+      /* Update error code */
+      hdma->ErrorCode |= HAL_DMA_ERROR_FE;
+
+      /* Change the DMA state */
+      hdma->State = HAL_DMA_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma);
+
+      if(hdma->XferErrorCallback != NULL)
+      {
+        /* Transfer error callback */
+        hdma->XferErrorCallback(hdma);
+      }
+    }
+  }
+  /* Direct Mode Error Interrupt management ***********************************/
+  if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma)) != RESET)
+  {
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET)
+    {
+      /* Disable the direct mode Error interrupt */
+      __HAL_DMA_DISABLE_IT(hdma, DMA_IT_DME);
+
+      /* Clear the direct mode error flag */
+      __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
+
+      /* Update error code */
+      hdma->ErrorCode |= HAL_DMA_ERROR_DME;
+
+      /* Change the DMA state */
+      hdma->State = HAL_DMA_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma);
+
+      if(hdma->XferErrorCallback != NULL)
+      {
+        /* Transfer error callback */
+        hdma->XferErrorCallback(hdma);
+      }
+    }
+  }
+  /* Half Transfer Complete Interrupt management ******************************/
+  if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)) != RESET)
+  {
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET)
+    {
+      /* Multi_Buffering mode enabled */
+      if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
+      {
+        /* Clear the half transfer complete flag */
+        __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+
+        /* Current memory buffer used is Memory 0 */
+        if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
+        {
+          /* Change DMA peripheral state */
+          hdma->State = HAL_DMA_STATE_READY_HALF_MEM0;
+        }
+        /* Current memory buffer used is Memory 1 */
+        else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
+        {
+          /* Change DMA peripheral state */
+          hdma->State = HAL_DMA_STATE_READY_HALF_MEM1;
+        }
+      }
+      else
+      {
+        /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
+        if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+        {
+          /* Disable the half transfer interrupt */
+          __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT);
+        }
+        /* Clear the half transfer complete flag */
+        __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
+
+        /* Change DMA peripheral state */
+        hdma->State = HAL_DMA_STATE_READY_HALF_MEM0;
+      }
+
+      if(hdma->XferHalfCpltCallback != NULL)
+      {
+        /* Half transfer callback */
+        hdma->XferHalfCpltCallback(hdma);
+      }
+    }
+  }
+  /* Transfer Complete Interrupt management ***********************************/
+  if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)) != RESET)
+  {
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET)
+    {
+      if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
+      {
+        /* Clear the transfer complete flag */
+        __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
+
+        /* Current memory buffer used is Memory 1 */
+        if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
+        {
+          if(hdma->XferM1CpltCallback != NULL)
+          {
+            /* Transfer complete Callback for memory1 */
+            hdma->XferM1CpltCallback(hdma);
+          }
+        }
+        /* Current memory buffer used is Memory 0 */
+        else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
+        {
+          if(hdma->XferCpltCallback != NULL)
+          {
+            /* Transfer complete Callback for memory0 */
+            hdma->XferCpltCallback(hdma);
+          }
+        }
+      }
+      /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */
+      else
+      {
+        if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+        {
+          /* Disable the transfer complete interrupt */
+          __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TC);
+        }
+        /* Clear the transfer complete flag */
+        __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
+
+        /* Update error code */
+        hdma->ErrorCode |= HAL_DMA_ERROR_NONE;
+
+        /* Change the DMA state */
+        hdma->State = HAL_DMA_STATE_READY_MEM0;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hdma);
+
+        if(hdma->XferCpltCallback != NULL)
+        {
+          /* Transfer complete callback */
+          hdma->XferCpltCallback(hdma);
+        }
+      }
+    }
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group3
+  *
+ at verbatim
+ ===============================================================================
+                    ##### State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Check the DMA state
+      (+) Get error code
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the DMA state.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Stream.
+  * @retval HAL state
+  */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
+{
+  return hdma->State;
+}
+
+/**
+  * @brief  Return the DMA error code
+  * @param  hdma : pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA Stream.
+  * @retval DMA Error Code
+  */
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
+{
+  return hdma->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Sets the DMA Transfer parameter.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+  /* Clear DBM bit */
+  hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM);
+
+  /* Configure DMA Stream data length */
+  hdma->Instance->NDTR = DataLength;
+
+  /* Peripheral to Memory */
+  if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+  {
+    /* Configure DMA Stream destination address */
+    hdma->Instance->PAR = DstAddress;
+
+    /* Configure DMA Stream source address */
+    hdma->Instance->M0AR = SrcAddress;
+  }
+  /* Memory to Peripheral */
+  else
+  {
+    /* Configure DMA Stream source address */
+    hdma->Instance->PAR = SrcAddress;
+
+    /* Configure DMA Stream destination address */
+    hdma->Instance->M0AR = DstAddress;
+  }
+}
+/**
+  * @}
+  */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c
new file mode 100644
index 0000000..a9d244c
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c
@@ -0,0 +1,1266 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dma2d.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   DMA2D HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the DMA2D peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State and Errors functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      (#) Program the required configuration through following parameters:
+          the Transfer Mode, the output color mode and the output offset using
+          HAL_DMA2D_Init() function.
+
+      (#) Program the required configuration through following parameters:
+          the input color mode, the input color, input alpha value, alpha mode
+          and the input offset using HAL_DMA2D_ConfigLayer() function for foreground
+          or/and background layer.
+
+     *** Polling mode IO operation ***
+     =================================
+    [..]
+       (+) Configure the pdata, Destination and data length and Enable
+           the transfer using HAL_DMA2D_Start()
+       (+) Wait for end of transfer using HAL_DMA2D_PollForTransfer(), at this stage
+           user can specify the value of timeout according to his end application.
+
+     *** Interrupt mode IO operation ***
+     ===================================
+     [..]
+       (#) Configure the pdata, Destination and data length and Enable
+           the transfer using HAL_DMA2D_Start_IT()
+       (#) Use HAL_DMA2D_IRQHandler() called under DMA2D_IRQHandler() Interrupt subroutine
+       (#) At the end of data transfer HAL_DMA2D_IRQHandler() function is executed and user can
+           add his own function by customization of function pointer XferCpltCallback and
+           XferErrorCallback (i.e a member of DMA2D handle structure).
+
+         - at -   In Register-to-Memory transfer mode, the pdata parameter is the register
+               color, in Memory-to-memory or memory-to-memory with pixel format
+               conversion the pdata is the source address.
+
+         - at -   Configure the foreground source address, the background source address,
+               the Destination and data length and Enable the transfer using
+               HAL_DMA2D_BlendingStart() in polling mode and HAL_DMA2D_BlendingStart_IT()
+               in interrupt mode.
+
+         - at -   HAL_DMA2D_BlendingStart() and HAL_DMA2D_BlendingStart_IT() functions
+               are used if the memory to memory with blending transfer mode is selected.
+
+      (#) Optionally, configure and enable the CLUT using HAL_DMA2D_ConfigCLUT()
+          HAL_DMA2D_EnableCLUT() functions.
+
+      (#) Optionally, configure and enable LineInterrupt using the following function:
+          HAL_DMA2D_ProgramLineEvent().
+
+      (#) The transfer can be suspended, continued and aborted using the following
+          functions: HAL_DMA2D_Suspend(), HAL_DMA2D_Resume(), HAL_DMA2D_Abort().
+
+      (#) To control DMA2D state you can use the following function: HAL_DMA2D_GetState()
+
+     *** DMA2D HAL driver macros list ***
+     =============================================
+     [..]
+       Below the list of most used macros in DMA2D HAL driver :
+
+      (+) __HAL_DMA2D_ENABLE: Enable the DMA2D peripheral.
+      (+) __HAL_DMA2D_DISABLE: Disable the DMA2D peripheral.
+      (+) __HAL_DMA2D_GET_FLAG: Get the DMA2D pending flags.
+      (+) __HAL_DMA2D_CLEAR_FLAG: Clear the DMA2D pending flags.
+      (+) __HAL_DMA2D_ENABLE_IT: Enable the specified DMA2D interrupts.
+      (+) __HAL_DMA2D_DISABLE_IT: Disable the specified DMA2D interrupts.
+      (+) __HAL_DMA2D_GET_IT_SOURCE: Check whether the specified DMA2D interrupt has occurred or not.
+
+     [..]
+      (@) You can refer to the DMA2D HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+/** @addtogroup DMA2D
+  * @brief DMA2D HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Private types -------------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup DMA2D_Private_Defines
+  * @{
+  */
+#define HAL_TIMEOUT_DMA2D_ABORT      ((uint32_t)1000)  /* 1s  */
+#define HAL_TIMEOUT_DMA2D_SUSPEND    ((uint32_t)1000)  /* 1s  */
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup DMA2D_Private_Functions_Prototypes
+  * @{
+  */
+static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA2D_Exported_Functions
+  * @{
+  */
+
+/** @defgroup DMA2D_Group1 Initialization and Configuration functions
+ *  @brief   Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+                ##### Initialization and Configuration functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the DMA2D
+      (+) De-initialize the DMA2D
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the DMA2D according to the specified
+  *         parameters in the DMA2D_InitTypeDef and create the associated handle.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d)
+{
+  uint32_t tmp = 0;
+
+  /* Check the DMA2D peripheral state */
+  if(hdma2d == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_ALL_INSTANCE(hdma2d->Instance));
+  assert_param(IS_DMA2D_MODE(hdma2d->Init.Mode));
+  assert_param(IS_DMA2D_CMODE(hdma2d->Init.ColorMode));
+  assert_param(IS_DMA2D_OFFSET(hdma2d->Init.OutputOffset));
+
+  if(hdma2d->State == HAL_DMA2D_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hdma2d->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_DMA2D_MspInit(hdma2d);
+  }
+
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+/* DMA2D CR register configuration -------------------------------------------*/
+  /* Get the CR register value */
+  tmp = hdma2d->Instance->CR;
+
+  /* Clear Mode bits */
+  tmp &= (uint32_t)~DMA2D_CR_MODE;
+
+  /* Prepare the value to be wrote to the CR register */
+  tmp |= hdma2d->Init.Mode;
+
+  /* Write to DMA2D CR register */
+  hdma2d->Instance->CR = tmp;
+
+/* DMA2D OPFCCR register configuration ---------------------------------------*/
+  /* Get the OPFCCR register value */
+  tmp = hdma2d->Instance->OPFCCR;
+
+  /* Clear Color Mode bits */
+  tmp &= (uint32_t)~DMA2D_OPFCCR_CM;
+
+  /* Prepare the value to be wrote to the OPFCCR register */
+  tmp |= hdma2d->Init.ColorMode;
+
+  /* Write to DMA2D OPFCCR register */
+  hdma2d->Instance->OPFCCR = tmp;
+
+/* DMA2D OOR register configuration ------------------------------------------*/
+  /* Get the OOR register value */
+  tmp = hdma2d->Instance->OOR;
+
+  /* Clear Offset bits */
+  tmp &= (uint32_t)~DMA2D_OOR_LO;
+
+  /* Prepare the value to be wrote to the OOR register */
+  tmp |= hdma2d->Init.OutputOffset;
+
+  /* Write to DMA2D OOR register */
+  hdma2d->Instance->OOR = tmp;
+
+  /* Update error code */
+  hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE;
+
+  /* Initialize the DMA2D state*/
+  hdma2d->State  = HAL_DMA2D_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deinitializes the DMA2D peripheral registers to their default reset
+  *         values.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @retval None
+  */
+
+HAL_StatusTypeDef HAL_DMA2D_DeInit(DMA2D_HandleTypeDef *hdma2d)
+{
+  /* Check the DMA2D peripheral state */
+  if(hdma2d == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* DeInit the low level hardware */
+  HAL_DMA2D_MspDeInit(hdma2d);
+
+  /* Update error code */
+  hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE;
+
+  /* Initialize the DMA2D state*/
+  hdma2d->State  = HAL_DMA2D_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hdma2d);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DMA2D MSP.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @retval None
+  */
+__weak void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DMA2D_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the DMA2D MSP.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @retval None
+  */
+__weak void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DMA2D_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Group2 IO operation functions
+ *  @brief   IO operation functions
+ *
+ at verbatim
+ ===============================================================================
+                      #####  IO operation functions  #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Configure the pdata, destination address and data size and
+          Start DMA2D transfer.
+      (+) Configure the source for foreground and background, destination address
+          and data size and Start MultiBuffer DMA2D transfer.
+      (+) Configure the pdata, destination address and data size and
+          Start DMA2D transfer with interrupt.
+      (+) Configure the source for foreground and background, destination address
+          and data size and Start MultiBuffer DMA2D transfer with interrupt.
+      (+) Abort DMA2D transfer.
+      (+) Suspend DMA2D transfer.
+      (+) Continue DMA2D transfer.
+      (+) Poll for transfer complete.
+      (+) handle DMA2D interrupt request.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Start the DMA2D Transfer.
+  * @param  hdma2d:     pointer to a DMA2D_HandleTypeDef structure that contains
+  *                     the configuration information for the DMA2D.
+  * @param  pdata:      Configure the source memory Buffer address if
+  *                     the memory to memory or memory to memory with pixel format
+  *                     conversion DMA2D mode is selected, and configure
+  *                     the color value if register to memory DMA2D mode is selected.
+  * @param  DstAddress: The destination memory Buffer address.
+  * @param  Width:      The width of data to be transferred from source to destination.
+  * @param  Height:      The height of data to be transferred from source to destination.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width,  uint32_t Height)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma2d);
+
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LINE(Height));
+  assert_param(IS_DMA2D_PIXEL(Width));
+
+  /* Disable the Peripheral */
+  __HAL_DMA2D_DISABLE(hdma2d);
+
+  /* Configure the source, destination address and the data size */
+  DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height);
+
+  /* Enable the Peripheral */
+  __HAL_DMA2D_ENABLE(hdma2d);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Start the DMA2D Transfer with interrupt enabled.
+  * @param  hdma2d:     pointer to a DMA2D_HandleTypeDef structure that contains
+  *                     the configuration information for the DMA2D.
+  * @param  pdata:      Configure the source memory Buffer address if
+  *                     the memory to memory or memory to memory with pixel format
+  *                     conversion DMA2D mode is selected, and configure
+  *                     the color value if register to memory DMA2D mode is selected.
+  * @param  DstAddress: The destination memory Buffer address.
+  * @param  Width:      The width of data to be transferred from source to destination.
+  * @param  Height:     The height of data to be transferred from source to destination.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width,  uint32_t Height)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma2d);
+
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LINE(Height));
+  assert_param(IS_DMA2D_PIXEL(Width));
+
+  /* Disable the Peripheral */
+  __HAL_DMA2D_DISABLE(hdma2d);
+
+  /* Configure the source, destination address and the data size */
+  DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height);
+
+  /* Enable the transfer complete interrupt */
+  __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC);
+
+  /* Enable the transfer Error interrupt */
+  __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TE);
+
+  /* Enable the Peripheral */
+  __HAL_DMA2D_ENABLE(hdma2d);
+
+  /* Enable the configuration error interrupt */
+  __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CE);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Start the multi-source DMA2D Transfer.
+  * @param  hdma2d:      pointer to a DMA2D_HandleTypeDef structure that contains
+  *                      the configuration information for the DMA2D.
+  * @param  SrcAddress1: The source memory Buffer address of the foreground layer.
+  * @param  SrcAddress2: The source memory Buffer address of the background layer.
+  * @param  DstAddress:  The destination memory Buffer address
+  * @param  Width:       The width of data to be transferred from source to destination.
+  * @param  Height:      The height of data to be transferred from source to destination.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t  SrcAddress2, uint32_t DstAddress, uint32_t Width,  uint32_t Height)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma2d);
+
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LINE(Height));
+  assert_param(IS_DMA2D_PIXEL(Width));
+
+  /* Disable the Peripheral */
+  __HAL_DMA2D_DISABLE(hdma2d);
+
+  /* Configure DMA2D Stream source2 address */
+  hdma2d->Instance->BGMAR = SrcAddress2;
+
+  /* Configure the source, destination address and the data size */
+  DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height);
+
+  /* Enable the Peripheral */
+  __HAL_DMA2D_ENABLE(hdma2d);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Start the multi-source DMA2D Transfer with interrupt enabled.
+  * @param  hdma2d:     pointer to a DMA2D_HandleTypeDef structure that contains
+  *                     the configuration information for the DMA2D.
+  * @param  SrcAddress1: The source memory Buffer address of the foreground layer.
+  * @param  SrcAddress2: The source memory Buffer address of the background layer.
+  * @param  DstAddress:  The destination memory Buffer address.
+  * @param  Width:       The width of data to be transferred from source to destination.
+  * @param  Height:      The height of data to be transferred from source to destination.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t  SrcAddress2, uint32_t DstAddress, uint32_t Width,  uint32_t Height)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma2d);
+
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LINE(Height));
+  assert_param(IS_DMA2D_PIXEL(Width));
+
+  /* Disable the Peripheral */
+  __HAL_DMA2D_DISABLE(hdma2d);
+
+  /* Configure DMA2D Stream source2 address */
+  hdma2d->Instance->BGMAR = SrcAddress2;
+
+  /* Configure the source, destination address and the data size */
+  DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height);
+
+  /* Enable the configuration error interrupt */
+  __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CE);
+
+  /* Enable the transfer complete interrupt */
+  __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC);
+
+  /* Enable the transfer Error interrupt */
+  __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TE);
+
+  /* Enable the Peripheral */
+  __HAL_DMA2D_ENABLE(hdma2d);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort the DMA2D Transfer.
+  * @param  hdma2d : pointer to a DMA2D_HandleTypeDef structure that contains
+  *                  the configuration information for the DMA2D.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d)
+{
+  uint32_t tickstart = 0;
+
+  /* Disable the DMA2D */
+  __HAL_DMA2D_DISABLE(hdma2d);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check if the DMA2D is effectively disabled */
+  while((hdma2d->Instance->CR & DMA2D_CR_START) != 0)
+  {
+    if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA2D_ABORT)
+    {
+      /* Update error code */
+      hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+
+      /* Change the DMA2D state */
+      hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma2d);
+
+      return HAL_TIMEOUT;
+    }
+  }
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdma2d);
+
+  /* Change the DMA2D state*/
+  hdma2d->State = HAL_DMA2D_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Suspend the DMA2D Transfer.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d)
+{
+  uint32_t tickstart = 0;
+
+  /* Suspend the DMA2D transfer */
+  hdma2d->Instance->CR |= DMA2D_CR_SUSP;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check if the DMA2D is effectively suspended */
+  while((hdma2d->Instance->CR & DMA2D_CR_SUSP) != DMA2D_CR_SUSP)
+  {
+    if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA2D_SUSPEND)
+    {
+      /* Update error code */
+      hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+
+      /* Change the DMA2D state */
+      hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
+
+      return HAL_TIMEOUT;
+    }
+  }
+  /* Change the DMA2D state*/
+  hdma2d->State = HAL_DMA2D_STATE_SUSPEND;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Resume the DMA2D Transfer.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d)
+{
+  /* Resume the DMA2D transfer */
+  hdma2d->Instance->CR &= ~DMA2D_CR_SUSP;
+
+  /* Change the DMA2D state*/
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Polling for transfer complete or CLUT loading.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout)
+{
+  uint32_t tmp, tmp1;
+  uint32_t tickstart = 0;
+
+  /* Polling for DMA2D transfer */
+  if((hdma2d->Instance->CR & DMA2D_CR_START) != 0)
+  {
+   /* Get tick */
+   tickstart = HAL_GetTick();
+
+    while(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) == RESET)
+    {
+      tmp  = __HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CE);
+      tmp1 = __HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TE);
+
+      if((tmp != RESET) || (tmp1 != RESET))
+      {
+        /* Clear the transfer and configuration error flags */
+        __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE);
+        __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TE);
+
+        /* Change DMA2D state */
+        hdma2d->State= HAL_DMA2D_STATE_ERROR;
+
+        /* Process unlocked */
+        __HAL_UNLOCK(hdma2d);
+
+        return HAL_ERROR;
+      }
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Process unlocked */
+          __HAL_UNLOCK(hdma2d);
+
+          /* Update error code */
+          hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+
+          /* Change the DMA2D state */
+          hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /* Polling for CLUT loading */
+  if((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) != 0)
+  {
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CTC) == RESET)
+    {
+      if((__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CAE) != RESET))
+      {
+        /* Clear the transfer and configuration error flags */
+        __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CAE);
+
+        /* Change DMA2D state */
+        hdma2d->State= HAL_DMA2D_STATE_ERROR;
+
+        return HAL_ERROR;
+      }
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Update error code */
+          hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+
+          /* Change the DMA2D state */
+          hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /* Clear the transfer complete flag */
+  __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC);
+
+  /* Clear the CLUT loading flag */
+  __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CTC);
+
+  /* Change DMA2D state */
+  hdma2d->State = HAL_DMA2D_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hdma2d);
+
+  return HAL_OK;
+}
+/**
+  * @brief  Handles DMA2D interrupt request.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @retval HAL status
+  */
+void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d)
+{
+  /* Transfer Error Interrupt management ***************************************/
+  if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TE) != RESET)
+  {
+    if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_TE) != RESET)
+    {
+      /* Disable the transfer Error interrupt */
+      __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TE);
+
+      /* Update error code */
+      hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE;
+
+      /* Clear the transfer error flag */
+      __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TE);
+
+      /* Change DMA2D state */
+      hdma2d->State = HAL_DMA2D_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma2d);
+
+      if(hdma2d->XferErrorCallback != NULL)
+      {
+        /* Transfer error Callback */
+        hdma2d->XferErrorCallback(hdma2d);
+      }
+    }
+  }
+  /* Configuration Error Interrupt management **********************************/
+  if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CE) != RESET)
+  {
+    if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_CE) != RESET)
+    {
+      /* Disable the Configuration Error interrupt */
+      __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CE);
+
+      /* Clear the Configuration error flag */
+      __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE);
+
+      /* Update error code */
+      hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE;
+
+      /* Change DMA2D state */
+      hdma2d->State = HAL_DMA2D_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma2d);
+
+      if(hdma2d->XferErrorCallback != NULL)
+      {
+        /* Transfer error Callback */
+        hdma2d->XferErrorCallback(hdma2d);
+      }
+    }
+  }
+  /* Transfer Complete Interrupt management ************************************/
+  if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) != RESET)
+  {
+    if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_TC) != RESET)
+    {
+      /* Disable the transfer complete interrupt */
+      __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC);
+
+      /* Clear the transfer complete flag */
+      __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC);
+
+      /* Update error code */
+      hdma2d->ErrorCode |= HAL_DMA2D_ERROR_NONE;
+
+      /* Change DMA2D state */
+      hdma2d->State = HAL_DMA2D_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma2d);
+
+      if(hdma2d->XferCpltCallback != NULL)
+      {
+        /* Transfer complete Callback */
+        hdma2d->XferCpltCallback(hdma2d);
+      }
+    }
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Group3 Peripheral Control functions
+ *  @brief    Peripheral Control functions
+ *
+ at verbatim
+ ===============================================================================
+                    ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Configure the DMA2D foreground or/and background parameters.
+      (+) Configure the DMA2D CLUT transfer.
+      (+) Enable DMA2D CLUT.
+      (+) Disable DMA2D CLUT.
+      (+) Configure the line watermark
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Configure the DMA2D Layer according to the specified
+  *         parameters in the DMA2D_InitTypeDef and create the associated handle.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @param  LayerIdx: DMA2D Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0(background) / 1(foreground)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
+{
+  DMA2D_LayerCfgTypeDef *pLayerCfg = &hdma2d->LayerCfg[LayerIdx];
+
+  uint32_t tmp = 0;
+
+  /* Process locked */
+  __HAL_LOCK(hdma2d);
+
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LAYER(LayerIdx));
+  assert_param(IS_DMA2D_OFFSET(pLayerCfg->InputOffset));
+  if(hdma2d->Init.Mode != DMA2D_R2M)
+  {
+    assert_param(IS_DMA2D_INPUT_COLOR_MODE(pLayerCfg->InputColorMode));
+    if(hdma2d->Init.Mode != DMA2D_M2M)
+    {
+      assert_param(IS_DMA2D_ALPHA_MODE(pLayerCfg->AlphaMode));
+    }
+  }
+
+  /* Configure the background DMA2D layer */
+  if(LayerIdx == 0)
+  {
+    /* DMA2D BGPFCR register configuration -----------------------------------*/
+    /* Get the BGPFCCR register value */
+    tmp = hdma2d->Instance->BGPFCCR;
+
+    /* Clear Input color mode, alpha value and alpha mode bits */
+    tmp &= (uint32_t)~(DMA2D_BGPFCCR_CM | DMA2D_BGPFCCR_AM | DMA2D_BGPFCCR_ALPHA);
+
+    if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
+    {
+      /* Prepare the value to be wrote to the BGPFCCR register */
+      tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | ((pLayerCfg->InputAlpha) & 0xFF000000));
+    }
+    else
+    {
+      /* Prepare the value to be wrote to the BGPFCCR register */
+      tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | (pLayerCfg->InputAlpha << 24));
+    }
+
+    /* Write to DMA2D BGPFCCR register */
+    hdma2d->Instance->BGPFCCR = tmp;
+
+    /* DMA2D BGOR register configuration -------------------------------------*/
+    /* Get the BGOR register value */
+    tmp = hdma2d->Instance->BGOR;
+
+    /* Clear colors bits */
+    tmp &= (uint32_t)~DMA2D_BGOR_LO;
+
+    /* Prepare the value to be wrote to the BGOR register */
+    tmp |= pLayerCfg->InputOffset;
+
+    /* Write to DMA2D BGOR register */
+    hdma2d->Instance->BGOR = tmp;
+
+    if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
+    {
+      /* Prepare the value to be wrote to the BGCOLR register */
+      tmp = ((pLayerCfg->InputAlpha) & 0x00FFFFFF);
+
+      /* Write to DMA2D BGCOLR register */
+      hdma2d->Instance->BGCOLR = tmp;
+    }
+  }
+  /* Configure the foreground DMA2D layer */
+  else
+  {
+    /* DMA2D FGPFCR register configuration -----------------------------------*/
+    /* Get the FGPFCCR register value */
+    tmp = hdma2d->Instance->FGPFCCR;
+
+    /* Clear Input color mode, alpha value and alpha mode bits */
+    tmp &= (uint32_t)~(DMA2D_FGPFCCR_CM | DMA2D_FGPFCCR_AM | DMA2D_FGPFCCR_ALPHA);
+
+    if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
+    {
+      /* Prepare the value to be wrote to the FGPFCCR register */
+      tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | ((pLayerCfg->InputAlpha) & 0xFF000000));
+    }
+    else
+    {
+      /* Prepare the value to be wrote to the FGPFCCR register */
+      tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | (pLayerCfg->InputAlpha << 24));
+    }
+
+    /* Write to DMA2D FGPFCCR register */
+    hdma2d->Instance->FGPFCCR = tmp;
+
+    /* DMA2D FGOR register configuration -------------------------------------*/
+    /* Get the FGOR register value */
+    tmp = hdma2d->Instance->FGOR;
+
+    /* Clear colors bits */
+    tmp &= (uint32_t)~DMA2D_FGOR_LO;
+
+    /* Prepare the value to be wrote to the FGOR register */
+    tmp |= pLayerCfg->InputOffset;
+
+    /* Write to DMA2D FGOR register */
+    hdma2d->Instance->FGOR = tmp;
+
+    if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
+    {
+      /* Prepare the value to be wrote to the FGCOLR register */
+      tmp = ((pLayerCfg->InputAlpha) & 0x00FFFFFF);
+
+      /* Write to DMA2D FGCOLR register */
+      hdma2d->Instance->FGCOLR = tmp;
+    }
+  }
+  /* Initialize the DMA2D state*/
+  hdma2d->State  = HAL_DMA2D_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hdma2d);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the DMA2D CLUT Transfer.
+  * @param  hdma2d:   pointer to a DMA2D_HandleTypeDef structure that contains
+  *                   the configuration information for the DMA2D.
+  * @param  CLUTCfg:  pointer to a DMA2D_CLUTCfgTypeDef structure that contains
+  *                   the configuration information for the color look up table.
+  * @param  LayerIdx: DMA2D Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0(background) / 1(foreground)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx)
+{
+  uint32_t tmp = 0, tmp1 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LAYER(LayerIdx));
+  assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode));
+  assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size));
+
+  /* Configure the CLUT of the background DMA2D layer */
+  if(LayerIdx == 0)
+  {
+    /* Get the BGCMAR register value */
+    tmp = hdma2d->Instance->BGCMAR;
+
+    /* Clear CLUT address bits */
+    tmp &= (uint32_t)~DMA2D_BGCMAR_MA;
+
+    /* Prepare the value to be wrote to the BGCMAR register */
+    tmp |= (uint32_t)CLUTCfg.pCLUT;
+
+    /* Write to DMA2D BGCMAR register */
+    hdma2d->Instance->BGCMAR = tmp;
+
+    /* Get the BGPFCCR register value */
+    tmp = hdma2d->Instance->BGPFCCR;
+
+    /* Clear CLUT size and CLUT address bits */
+    tmp &= (uint32_t)~(DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM);
+
+    /* Get the CLUT size */
+    tmp1 = CLUTCfg.Size << 16;
+
+    /* Prepare the value to be wrote to the BGPFCCR register */
+    tmp |= (CLUTCfg.CLUTColorMode | tmp1);
+
+    /* Write to DMA2D BGPFCCR register */
+    hdma2d->Instance->BGPFCCR = tmp;
+  }
+  /* Configure the CLUT of the foreground DMA2D layer */
+  else
+  {
+    /* Get the FGCMAR register value */
+    tmp = hdma2d->Instance->FGCMAR;
+
+    /* Clear CLUT address bits */
+    tmp &= (uint32_t)~DMA2D_FGCMAR_MA;
+
+    /* Prepare the value to be wrote to the FGCMAR register */
+    tmp |= (uint32_t)CLUTCfg.pCLUT;
+
+    /* Write to DMA2D FGCMAR register */
+    hdma2d->Instance->FGCMAR = tmp;
+
+    /* Get the FGPFCCR register value */
+    tmp = hdma2d->Instance->FGPFCCR;
+
+    /* Clear CLUT size and CLUT address bits */
+    tmp &= (uint32_t)~(DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM);
+
+    /* Get the CLUT size */
+    tmp1 = CLUTCfg.Size << 8;
+
+    /* Prepare the value to be wrote to the FGPFCCR register */
+    tmp |= (CLUTCfg.CLUTColorMode | tmp1);
+
+    /* Write to DMA2D FGPFCCR register */
+    hdma2d->Instance->FGPFCCR = tmp;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enable the DMA2D CLUT Transfer.
+  * @param  hdma2d:   pointer to a DMA2D_HandleTypeDef structure that contains
+  *                   the configuration information for the DMA2D.
+  * @param  LayerIdx: DMA2D Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0(background) / 1(foreground)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LAYER(LayerIdx));
+
+  if(LayerIdx == 0)
+  {
+    /* Enable the CLUT loading for the background */
+    hdma2d->Instance->BGPFCCR |= DMA2D_BGPFCCR_START;
+  }
+  else
+  {
+    /* Enable the CLUT loading for the foreground */
+    hdma2d->Instance->FGPFCCR |= DMA2D_FGPFCCR_START;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the DMA2D CLUT Transfer.
+  * @param  hdma2d:   pointer to a DMA2D_HandleTypeDef structure that contains
+  *                   the configuration information for the DMA2D.
+  * @param  LayerIdx: DMA2D Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0(background) / 1(foreground)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LAYER(LayerIdx));
+
+  if(LayerIdx == 0)
+  {
+    /* Disable the CLUT loading for the background */
+    hdma2d->Instance->BGPFCCR &= ~DMA2D_BGPFCCR_START;
+  }
+  else
+  {
+    /* Disable the CLUT loading for the foreground */
+    hdma2d->Instance->FGPFCCR &= ~DMA2D_FGPFCCR_START;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Define the configuration of the line watermark .
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @param  Line:   Line Watermark configuration.
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma2d);
+
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LineWatermark(Line));
+
+  /* Sets the Line watermark configuration */
+  DMA2D->LWR = (uint32_t)Line;
+
+  /* Initialize the DMA2D state*/
+  hdma2d->State = HAL_DMA2D_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hdma2d);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Group4 Peripheral State functions
+ *  @brief    Peripheral State functions
+ *
+ at verbatim
+ ===============================================================================
+                  ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to :
+      (+) Check the DMA2D state
+      (+) Get error code
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the DMA2D state
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @retval HAL state
+  */
+HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d)
+{
+  return hdma2d->State;
+}
+
+/**
+  * @brief  Return the DMA2D error code
+  * @param  hdma2d : pointer to a DMA2D_HandleTypeDef structure that contains
+  *               the configuration information for DMA2D.
+  * @retval DMA2D Error Code
+  */
+uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d)
+{
+  return hdma2d->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @brief  Set the DMA2D Transfer parameter.
+  * @param  hdma2d:     pointer to a DMA2D_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA2D.
+  * @param  pdata:      The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  Width:      The width of data to be transferred from source to destination.
+  * @param  Height:     The height of data to be transferred from source to destination.
+  * @retval HAL status
+  */
+static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height)
+{
+  uint32_t tmp = 0;
+  uint32_t tmp1 = 0;
+  uint32_t tmp2 = 0;
+  uint32_t tmp3 = 0;
+  uint32_t tmp4 = 0;
+
+  tmp = Width << 16;
+
+  /* Configure DMA2D data size */
+  hdma2d->Instance->NLR = (Height | tmp);
+
+  /* Configure DMA2D destination address */
+  hdma2d->Instance->OMAR = DstAddress;
+
+  /* Register to memory DMA2D mode selected */
+  if (hdma2d->Init.Mode == DMA2D_R2M)
+  {
+    tmp1 = pdata & DMA2D_OCOLR_ALPHA_1;
+    tmp2 = pdata & DMA2D_OCOLR_RED_1;
+    tmp3 = pdata & DMA2D_OCOLR_GREEN_1;
+    tmp4 = pdata & DMA2D_OCOLR_BLUE_1;
+
+    /* Prepare the value to be wrote to the OCOLR register according to the color mode */
+    if (hdma2d->Init.ColorMode == DMA2D_ARGB8888)
+    {
+      tmp = (tmp3 | tmp2 | tmp1| tmp4);
+    }
+    else if (hdma2d->Init.ColorMode == DMA2D_RGB888)
+    {
+      tmp = (tmp3 | tmp2 | tmp4);
+    }
+    else if (hdma2d->Init.ColorMode == DMA2D_RGB565)
+    {
+      tmp2 = (tmp2 >> 19);
+      tmp3 = (tmp3 >> 10);
+      tmp4 = (tmp4 >> 3 );
+      tmp  = ((tmp3 << 5) | (tmp2 << 11) | tmp4);
+    }
+    else if (hdma2d->Init.ColorMode == DMA2D_ARGB1555)
+    {
+      tmp1 = (tmp1 >> 31);
+      tmp2 = (tmp2 >> 19);
+      tmp3 = (tmp3 >> 11);
+      tmp4 = (tmp4 >> 3 );
+      tmp  = ((tmp3 << 5) | (tmp2 << 10) | (tmp1 << 15) | tmp4);
+    }
+    else /* DMA2D_CMode = DMA2D_ARGB4444 */
+    {
+      tmp1 = (tmp1 >> 28);
+      tmp2 = (tmp2 >> 20);
+      tmp3 = (tmp3 >> 12);
+      tmp4 = (tmp4 >> 4 );
+      tmp  = ((tmp3 << 4) | (tmp2 << 8) | (tmp1 << 12) | tmp4);
+    }
+    /* Write to DMA2D OCOLR register */
+    hdma2d->Instance->OCOLR = tmp;
+  }
+  else /* M2M, M2M_PFC or M2M_Blending DMA2D Mode */
+  {
+    /* Configure DMA2D source address */
+    hdma2d->Instance->FGMAR = pdata;
+  }
+}
+
+/**
+  * @}
+  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c
new file mode 100644
index 0000000..923883e
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c
@@ -0,0 +1,307 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dma_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   DMA Extension HAL module driver
+  *         This file provides firmware functions to manage the following
+  *         functionalities of the DMA Extension peripheral:
+  *           + Extended features functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+  The DMA Extension HAL driver can be used as follows:
+   (#) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
+       for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
+
+     - at -  In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
+     - at -  When Multi (Double) Buffer mode is enabled the, transfer is circular by default.
+     - at -  In Multi (Double) buffer mode, it is possible to update the base address for
+          the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DMAEx DMAEx
+  * @brief DMA Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private Constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DMAEx_Private_Functions
+  * @{
+  */
+static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @addtogroup DMAEx_Exported_Functions
+  * @{
+  */
+
+
+/** @addtogroup DMAEx_Exported_Functions_Group1
+  *
+ at verbatim
+ ===============================================================================
+                #####  Extended features functions  #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Configure the source, destination address and data length and
+          Start MultiBuffer DMA transfer
+      (+) Configure the source, destination address and data length and
+          Start MultiBuffer DMA transfer with interrupt
+      (+) Change on the fly the memory0 or memory1 address.
+
+ at endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Starts the multi_buffer DMA Transfer.
+  * @param  hdma      : pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
+{
+  /* Process Locked */
+  __HAL_LOCK(hdma);
+
+  /* Current memory buffer used is Memory 0 */
+  if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
+  {
+    hdma->State = HAL_DMA_STATE_BUSY_MEM0;
+  }
+  /* Current memory buffer used is Memory 1 */
+  else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
+  {
+    hdma->State = HAL_DMA_STATE_BUSY_MEM1;
+  }
+
+   /* Check the parameters */
+  assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+  /* Disable the peripheral */
+  __HAL_DMA_DISABLE(hdma);
+
+  /* Enable the double buffer mode */
+  hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
+
+  /* Configure DMA Stream destination address */
+  hdma->Instance->M1AR = SecondMemAddress;
+
+  /* Configure the source, destination address and the data length */
+  DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+  /* Enable the peripheral */
+  __HAL_DMA_ENABLE(hdma);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the multi_buffer DMA Transfer with interrupt enabled.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
+{
+  /* Process Locked */
+  __HAL_LOCK(hdma);
+
+  /* Current memory buffer used is Memory 0 */
+  if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
+  {
+    hdma->State = HAL_DMA_STATE_BUSY_MEM0;
+  }
+  /* Current memory buffer used is Memory 1 */
+  else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
+  {
+    hdma->State = HAL_DMA_STATE_BUSY_MEM1;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+  /* Disable the peripheral */
+  __HAL_DMA_DISABLE(hdma);
+
+  /* Enable the Double buffer mode */
+  hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
+
+  /* Configure DMA Stream destination address */
+  hdma->Instance->M1AR = SecondMemAddress;
+
+  /* Configure the source, destination address and the data length */
+  DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+  /* Enable the transfer complete interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TC);
+
+  /* Enable the Half transfer interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_HT);
+
+  /* Enable the transfer Error interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TE);
+
+  /* Enable the fifo Error interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_FE);
+
+  /* Enable the direct mode Error interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_DME);
+
+  /* Enable the peripheral */
+  __HAL_DMA_ENABLE(hdma);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Change the memory0 or memory1 address on the fly.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  Address:    The new address
+  * @param  memory:     the memory to be changed, This parameter can be one of
+  *                     the following values:
+  *                      MEMORY0 /
+  *                      MEMORY1
+  * @note   The MEMORY0 address can be changed only when the current transfer use
+  *         MEMORY1 and the MEMORY1 address can be changed only when the current
+  *         transfer use MEMORY0.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
+{
+  if(memory == MEMORY0)
+  {
+    /* change the memory0 address */
+    hdma->Instance->M0AR = Address;
+  }
+  else
+  {
+    /* change the memory1 address */
+    hdma->Instance->M1AR = Address;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMAEx_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Set the DMA Transfer parameter.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+  /* Configure DMA Stream data length */
+  hdma->Instance->NDTR = DataLength;
+
+  /* Peripheral to Memory */
+  if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+  {
+    /* Configure DMA Stream destination address */
+    hdma->Instance->PAR = DstAddress;
+
+    /* Configure DMA Stream source address */
+    hdma->Instance->M0AR = SrcAddress;
+  }
+  /* Memory to Peripheral */
+  else
+  {
+    /* Configure DMA Stream source address */
+    hdma->Instance->PAR = SrcAddress;
+
+    /* Configure DMA Stream destination address */
+    hdma->Instance->M0AR = DstAddress;
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c
new file mode 100644
index 0000000..686e3e7
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c
@@ -0,0 +1,2017 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_eth.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   ETH HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Ethernet (ETH) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State and Errors functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      (#)Declare a ETH_HandleTypeDef handle structure, for example:
+         ETH_HandleTypeDef  heth;
+
+      (#)Fill parameters of Init structure in heth handle
+
+      (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...)
+
+      (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API:
+          (##) Enable the Ethernet interface clock using
+               (+++) __HAL_RCC_ETHMAC_CLK_ENABLE();
+               (+++) __HAL_RCC_ETHMACTX_CLK_ENABLE();
+               (+++) __HAL_RCC_ETHMACRX_CLK_ENABLE();
+
+          (##) Initialize the related GPIO clocks
+          (##) Configure Ethernet pin-out
+          (##) Configure Ethernet NVIC interrupt (IT mode)
+
+      (#)Initialize Ethernet DMA Descriptors in chain mode and point to allocated buffers:
+          (##) HAL_ETH_DMATxDescListInit(); for Transmission process
+          (##) HAL_ETH_DMARxDescListInit(); for Reception process
+
+      (#)Enable MAC and DMA transmission and reception:
+          (##) HAL_ETH_Start();
+
+      (#)Prepare ETH DMA TX Descriptors and give the hand to ETH DMA to transfer
+         the frame to MAC TX FIFO:
+         (##) HAL_ETH_TransmitFrame();
+
+      (#)Poll for a received frame in ETH RX DMA Descriptors and get received
+         frame parameters
+         (##) HAL_ETH_GetReceivedFrame(); (should be called into an infinite loop)
+
+      (#) Get a received frame when an ETH RX interrupt occurs:
+         (##) HAL_ETH_GetReceivedFrame_IT(); (called in IT mode only)
+
+      (#) Communicate with external PHY device:
+         (##) Read a specific register from the PHY
+              HAL_ETH_ReadPHYRegister();
+         (##) Write data to a specific RHY register:
+              HAL_ETH_WritePHYRegister();
+
+      (#) Configure the Ethernet MAC after ETH peripheral initialization
+          HAL_ETH_ConfigMAC(); all MAC parameters should be filled.
+
+      (#) Configure the Ethernet DMA after ETH peripheral initialization
+          HAL_ETH_ConfigDMA(); all DMA parameters should be filled.
+
+      - at - The PTP protocol and the DMA descriptors ring mode are not supported
+          in this driver
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup ETH ETH
+  * @brief ETH HAL module driver
+  * @{
+  */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup ETH_Private_Constants ETH Private Constants
+  * @{
+  */
+#define LINKED_STATE_TIMEOUT_VALUE          ((uint32_t)2000)  /* 2000 ms */
+#define AUTONEGO_COMPLETED_TIMEOUT_VALUE    ((uint32_t)1000)  /* 1000 ms */
+
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup ETH_Private_Functions ETH Private Functions
+  * @{
+  */
+static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err);
+static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr);
+static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth);
+static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth);
+static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth);
+static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth);
+static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth);
+static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth);
+static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth);
+static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth);
+static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth);
+
+/**
+  * @}
+  */
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup ETH_Exported_Functions ETH Exported Functions
+  * @{
+  */
+
+/** @defgroup ETH_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief   Initialization and Configuration functions
+  *
+  @verbatim
+  ===============================================================================
+            ##### Initialization and de-initialization functions #####
+  ===============================================================================
+  [..]  This section provides functions allowing to:
+      (+) Initialize and configure the Ethernet peripheral
+      (+) De-initialize the Ethernet peripheral
+
+  @endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the Ethernet MAC and DMA according to default
+  *         parameters.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth)
+{
+  uint32_t tmpreg1 = 0, phyreg = 0;
+  uint32_t hclk = 60000000;
+  uint32_t tickstart = 0;
+  uint32_t err = ETH_SUCCESS;
+
+  /* Check the ETH peripheral state */
+  if(heth == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check parameters */
+  assert_param(IS_ETH_AUTONEGOTIATION(heth->Init.AutoNegotiation));
+  assert_param(IS_ETH_RX_MODE(heth->Init.RxMode));
+  assert_param(IS_ETH_CHECKSUM_MODE(heth->Init.ChecksumMode));
+  assert_param(IS_ETH_MEDIA_INTERFACE(heth->Init.MediaInterface));
+
+  if(heth->State == HAL_ETH_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    heth->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, NVIC. */
+    HAL_ETH_MspInit(heth);
+  }
+
+  /* Enable SYSCFG Clock */
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+  /* Select MII or RMII Mode*/
+  SYSCFG->PMC &= ~(SYSCFG_PMC_MII_RMII_SEL);
+  SYSCFG->PMC |= (uint32_t)heth->Init.MediaInterface;
+
+  /* Ethernet Software reset */
+  /* Set the SWR bit: resets all MAC subsystem internal registers and logic */
+  /* After reset all the registers holds their respective reset values */
+  (heth->Instance)->DMABMR |= ETH_DMABMR_SR;
+
+  /* Wait for software reset */
+  while (((heth->Instance)->DMABMR & ETH_DMABMR_SR) != (uint32_t)RESET)
+  {
+  }
+
+  /*-------------------------------- MAC Initialization ----------------------*/
+  /* Get the ETHERNET MACMIIAR value */
+  tmpreg1 = (heth->Instance)->MACMIIAR;
+  /* Clear CSR Clock Range CR[2:0] bits */
+  tmpreg1 &= ETH_MACMIIAR_CR_MASK;
+
+  /* Get hclk frequency value */
+  hclk = HAL_RCC_GetHCLKFreq();
+
+  /* Set CR bits depending on hclk value */
+  if((hclk >= 20000000)&&(hclk < 35000000))
+  {
+    /* CSR Clock Range between 20-35 MHz */
+    tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div16;
+  }
+  else if((hclk >= 35000000)&&(hclk < 60000000))
+  {
+    /* CSR Clock Range between 35-60 MHz */
+    tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div26;
+  }
+  else if((hclk >= 60000000)&&(hclk < 100000000))
+  {
+    /* CSR Clock Range between 60-100 MHz */
+    tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div42;
+  }
+  else if((hclk >= 100000000)&&(hclk < 150000000))
+  {
+    /* CSR Clock Range between 100-150 MHz */
+    tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div62;
+  }
+  else /* ((hclk >= 150000000)&&(hclk <= 168000000)) */
+  {
+    /* CSR Clock Range between 150-168 MHz */
+    tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div102;
+  }
+
+  /* Write to ETHERNET MAC MIIAR: Configure the ETHERNET CSR Clock Range */
+  (heth->Instance)->MACMIIAR = (uint32_t)tmpreg1;
+
+  /*-------------------- PHY initialization and configuration ----------------*/
+  /* Put the PHY in reset mode */
+  if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_RESET)) != HAL_OK)
+  {
+    /* In case of write timeout */
+    err = ETH_ERROR;
+
+    /* Config MAC and DMA */
+    ETH_MACDMAConfig(heth, err);
+
+    /* Set the ETH peripheral state to READY */
+    heth->State = HAL_ETH_STATE_READY;
+
+    /* Return HAL_ERROR */
+    return HAL_ERROR;
+  }
+
+  /* Delay to assure PHY reset */
+  HAL_Delay(PHY_RESET_DELAY);
+
+  if((heth->Init).AutoNegotiation != ETH_AUTONEGOTIATION_DISABLE)
+  {
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* We wait for linked status */
+    do
+    {
+      HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
+
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > LINKED_STATE_TIMEOUT_VALUE)
+      {
+        /* In case of write timeout */
+        err = ETH_ERROR;
+
+        /* Config MAC and DMA */
+        ETH_MACDMAConfig(heth, err);
+
+        heth->State= HAL_ETH_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(heth);
+
+        return HAL_TIMEOUT;
+      }
+    } while (((phyreg & PHY_LINKED_STATUS) != PHY_LINKED_STATUS));
+
+
+    /* Enable Auto-Negotiation */
+    if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_AUTONEGOTIATION)) != HAL_OK)
+    {
+      /* In case of write timeout */
+      err = ETH_ERROR;
+
+      /* Config MAC and DMA */
+      ETH_MACDMAConfig(heth, err);
+
+      /* Set the ETH peripheral state to READY */
+      heth->State = HAL_ETH_STATE_READY;
+
+      /* Return HAL_ERROR */
+      return HAL_ERROR;
+    }
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait until the auto-negotiation will be completed */
+    do
+    {
+      HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
+
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > AUTONEGO_COMPLETED_TIMEOUT_VALUE)
+      {
+        /* In case of write timeout */
+        err = ETH_ERROR;
+
+        /* Config MAC and DMA */
+        ETH_MACDMAConfig(heth, err);
+
+        heth->State= HAL_ETH_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(heth);
+
+        return HAL_TIMEOUT;
+      }
+
+    } while (((phyreg & PHY_AUTONEGO_COMPLETE) != PHY_AUTONEGO_COMPLETE));
+
+    /* Read the result of the auto-negotiation */
+    if((HAL_ETH_ReadPHYRegister(heth, PHY_SR, &phyreg)) != HAL_OK)
+    {
+      /* In case of write timeout */
+      err = ETH_ERROR;
+
+      /* Config MAC and DMA */
+      ETH_MACDMAConfig(heth, err);
+
+      /* Set the ETH peripheral state to READY */
+      heth->State = HAL_ETH_STATE_READY;
+
+      /* Return HAL_ERROR */
+      return HAL_ERROR;
+    }
+
+    /* Configure the MAC with the Duplex Mode fixed by the auto-negotiation process */
+    if((phyreg & PHY_DUPLEX_STATUS) != (uint32_t)RESET)
+    {
+      /* Set Ethernet duplex mode to Full-duplex following the auto-negotiation */
+      (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;
+    }
+    else
+    {
+      /* Set Ethernet duplex mode to Half-duplex following the auto-negotiation */
+      (heth->Init).DuplexMode = ETH_MODE_HALFDUPLEX;
+    }
+    /* Configure the MAC with the speed fixed by the auto-negotiation process */
+    if((phyreg & PHY_SPEED_STATUS) == PHY_SPEED_STATUS)
+    {
+      /* Set Ethernet speed to 10M following the auto-negotiation */
+      (heth->Init).Speed = ETH_SPEED_10M;
+    }
+    else
+    {
+      /* Set Ethernet speed to 100M following the auto-negotiation */
+      (heth->Init).Speed = ETH_SPEED_100M;
+    }
+  }
+  else /* AutoNegotiation Disable */
+  {
+    /* Check parameters */
+    assert_param(IS_ETH_SPEED(heth->Init.Speed));
+    assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode));
+
+    /* Set MAC Speed and Duplex Mode */
+    if(HAL_ETH_WritePHYRegister(heth, PHY_BCR, ((uint16_t)((heth->Init).DuplexMode >> 3) |
+                                                (uint16_t)((heth->Init).Speed >> 1))) != HAL_OK)
+    {
+      /* In case of write timeout */
+      err = ETH_ERROR;
+
+      /* Config MAC and DMA */
+      ETH_MACDMAConfig(heth, err);
+
+      /* Set the ETH peripheral state to READY */
+      heth->State = HAL_ETH_STATE_READY;
+
+      /* Return HAL_ERROR */
+      return HAL_ERROR;
+    }
+
+    /* Delay to assure PHY configuration */
+    HAL_Delay(PHY_CONFIG_DELAY);
+  }
+
+  /* Config MAC and DMA */
+  ETH_MACDMAConfig(heth, err);
+
+  /* Set ETH HAL State to Ready */
+  heth->State= HAL_ETH_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  De-Initializes the ETH peripheral.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth)
+{
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+
+  /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */
+  HAL_ETH_MspDeInit(heth);
+
+  /* Set ETH HAL state to Disabled */
+  heth->State= HAL_ETH_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(heth);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DMA Tx descriptors in chain mode.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  DMATxDescTab: Pointer to the first Tx desc list
+  * @param  TxBuff: Pointer to the first TxBuffer list
+  * @param  TxBuffCount: Number of the used Tx desc in the list
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t *TxBuff, uint32_t TxBuffCount)
+{
+  uint32_t i = 0;
+  ETH_DMADescTypeDef *dmatxdesc;
+
+  /* Process Locked */
+  __HAL_LOCK(heth);
+
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+
+  /* Set the DMATxDescToSet pointer with the first one of the DMATxDescTab list */
+  heth->TxDesc = DMATxDescTab;
+
+  /* Fill each DMATxDesc descriptor with the right values */
+  for(i=0; i < TxBuffCount; i++)
+  {
+    /* Get the pointer on the ith member of the Tx Desc list */
+    dmatxdesc = DMATxDescTab + i;
+
+    /* Set Second Address Chained bit */
+    dmatxdesc->Status = ETH_DMATXDESC_TCH;
+
+    /* Set Buffer1 address pointer */
+    dmatxdesc->Buffer1Addr = (uint32_t)(&TxBuff[i*ETH_TX_BUF_SIZE]);
+
+    if ((heth->Init).ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
+    {
+      /* Set the DMA Tx descriptors checksum insertion */
+      dmatxdesc->Status |= ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL;
+    }
+
+    /* Initialize the next descriptor with the Next Descriptor Polling Enable */
+    if(i < (TxBuffCount-1))
+    {
+      /* Set next descriptor address register with next descriptor base address */
+      dmatxdesc->Buffer2NextDescAddr = (uint32_t)(DMATxDescTab+i+1);
+    }
+    else
+    {
+      /* For last descriptor, set next descriptor address register equal to the first descriptor base address */
+      dmatxdesc->Buffer2NextDescAddr = (uint32_t) DMATxDescTab;
+    }
+  }
+
+  /* Set Transmit Descriptor List Address Register */
+  (heth->Instance)->DMATDLAR = (uint32_t) DMATxDescTab;
+
+  /* Set ETH HAL State to Ready */
+  heth->State= HAL_ETH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DMA Rx descriptors in chain mode.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  DMARxDescTab: Pointer to the first Rx desc list
+  * @param  RxBuff: Pointer to the first RxBuffer list
+  * @param  RxBuffCount: Number of the used Rx desc in the list
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount)
+{
+  uint32_t i = 0;
+  ETH_DMADescTypeDef *DMARxDesc;
+
+  /* Process Locked */
+  __HAL_LOCK(heth);
+
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+
+  /* Set the Ethernet RxDesc pointer with the first one of the DMARxDescTab list */
+  heth->RxDesc = DMARxDescTab;
+
+  /* Fill each DMARxDesc descriptor with the right values */
+  for(i=0; i < RxBuffCount; i++)
+  {
+    /* Get the pointer on the ith member of the Rx Desc list */
+    DMARxDesc = DMARxDescTab+i;
+
+    /* Set Own bit of the Rx descriptor Status */
+    DMARxDesc->Status = ETH_DMARXDESC_OWN;
+
+    /* Set Buffer1 size and Second Address Chained bit */
+    DMARxDesc->ControlBufferSize = ETH_DMARXDESC_RCH | ETH_RX_BUF_SIZE;
+
+    /* Set Buffer1 address pointer */
+    DMARxDesc->Buffer1Addr = (uint32_t)(&RxBuff[i*ETH_RX_BUF_SIZE]);
+
+    if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
+    {
+      /* Enable Ethernet DMA Rx Descriptor interrupt */
+      DMARxDesc->ControlBufferSize &= ~ETH_DMARXDESC_DIC;
+    }
+
+    /* Initialize the next descriptor with the Next Descriptor Polling Enable */
+    if(i < (RxBuffCount-1))
+    {
+      /* Set next descriptor address register with next descriptor base address */
+      DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab+i+1);
+    }
+    else
+    {
+      /* For last descriptor, set next descriptor address register equal to the first descriptor base address */
+      DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab);
+    }
+  }
+
+  /* Set Receive Descriptor List Address Register */
+  (heth->Instance)->DMARDLAR = (uint32_t) DMARxDescTab;
+
+  /* Set ETH HAL State to Ready */
+  heth->State= HAL_ETH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the ETH MSP.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_MspInit could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  DeInitializes ETH MSP.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_MspDeInit could be implemented in the user file
+  */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Exported_Functions_Group2 IO operation functions
+  *  @brief   Data transfers functions
+  *
+  @verbatim
+  ==============================================================================
+                          ##### IO operation functions #####
+  ==============================================================================
+  [..]  This section provides functions allowing to:
+        (+) Transmit a frame
+            HAL_ETH_TransmitFrame();
+        (+) Receive a frame
+            HAL_ETH_GetReceivedFrame();
+            HAL_ETH_GetReceivedFrame_IT();
+        (+) Read from an External PHY register
+            HAL_ETH_ReadPHYRegister();
+        (+) Write to an External PHY register
+            HAL_ETH_WritePHYRegister();
+
+  @endverbatim
+
+  * @{
+  */
+
+/**
+  * @brief  Sends an Ethernet frame.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  FrameLength: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength)
+{
+  uint32_t bufcount = 0, size = 0, i = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(heth);
+
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+
+  if (FrameLength == 0)
+  {
+    /* Set ETH HAL state to READY */
+    heth->State = HAL_ETH_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+
+    return  HAL_ERROR;
+  }
+
+  /* Check if the descriptor is owned by the ETHERNET DMA (when set) or CPU (when reset) */
+  if(((heth->TxDesc)->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET)
+  {
+    /* OWN bit set */
+    heth->State = HAL_ETH_STATE_BUSY_TX;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+
+    return HAL_ERROR;
+  }
+
+  /* Get the number of needed Tx buffers for the current frame */
+  if (FrameLength > ETH_TX_BUF_SIZE)
+  {
+    bufcount = FrameLength/ETH_TX_BUF_SIZE;
+    if (FrameLength % ETH_TX_BUF_SIZE)
+    {
+      bufcount++;
+    }
+  }
+  else
+  {
+    bufcount = 1;
+  }
+  if (bufcount == 1)
+  {
+    /* Set LAST and FIRST segment */
+    heth->TxDesc->Status |=ETH_DMATXDESC_FS|ETH_DMATXDESC_LS;
+    /* Set frame size */
+    heth->TxDesc->ControlBufferSize = (FrameLength & ETH_DMATXDESC_TBS1);
+    /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
+    heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
+    /* Point to next descriptor */
+    heth->TxDesc= (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
+  }
+  else
+  {
+    for (i=0; i< bufcount; i++)
+    {
+      /* Clear FIRST and LAST segment bits */
+      heth->TxDesc->Status &= ~(ETH_DMATXDESC_FS | ETH_DMATXDESC_LS);
+
+      if (i == 0)
+      {
+        /* Setting the first segment bit */
+        heth->TxDesc->Status |= ETH_DMATXDESC_FS;
+      }
+
+      /* Program size */
+      heth->TxDesc->ControlBufferSize = (ETH_TX_BUF_SIZE & ETH_DMATXDESC_TBS1);
+
+      if (i == (bufcount-1))
+      {
+        /* Setting the last segment bit */
+        heth->TxDesc->Status |= ETH_DMATXDESC_LS;
+        size = FrameLength - (bufcount-1)*ETH_TX_BUF_SIZE;
+        heth->TxDesc->ControlBufferSize = (size & ETH_DMATXDESC_TBS1);
+      }
+
+      /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
+      heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
+      /* point to next descriptor */
+      heth->TxDesc = (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
+    }
+  }
+
+  /* When Tx Buffer unavailable flag is set: clear it and resume transmission */
+  if (((heth->Instance)->DMASR & ETH_DMASR_TBUS) != (uint32_t)RESET)
+  {
+    /* Clear TBUS ETHERNET DMA flag */
+    (heth->Instance)->DMASR = ETH_DMASR_TBUS;
+    /* Resume DMA transmission*/
+    (heth->Instance)->DMATPDR = 0;
+  }
+
+  /* Set ETH HAL State to Ready */
+  heth->State = HAL_ETH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Checks for received frames.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth)
+{
+  uint32_t framelength = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(heth);
+
+  /* Check the ETH state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+
+  /* Check if segment is not owned by DMA */
+  /* (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET)) */
+  if(((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET))
+  {
+    /* Check if last segment */
+    if(((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET))
+    {
+      /* increment segment count */
+      (heth->RxFrameInfos).SegCount++;
+
+      /* Check if last segment is first segment: one segment contains the frame */
+      if ((heth->RxFrameInfos).SegCount == 1)
+      {
+        (heth->RxFrameInfos).FSRxDesc =heth->RxDesc;
+      }
+
+      heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
+
+      /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
+      framelength = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4;
+      heth->RxFrameInfos.length = framelength;
+
+      /* Get the address of the buffer start address */
+      heth->RxFrameInfos.buffer = ((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
+      /* point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) ((heth->RxDesc)->Buffer2NextDescAddr);
+
+      /* Set HAL State to Ready */
+      heth->State = HAL_ETH_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+
+      /* Return function status */
+      return HAL_OK;
+    }
+    /* Check if first segment */
+    else if((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET)
+    {
+      (heth->RxFrameInfos).FSRxDesc = heth->RxDesc;
+      (heth->RxFrameInfos).LSRxDesc = NULL;
+      (heth->RxFrameInfos).SegCount = 1;
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+    }
+    /* Check if intermediate segment */
+    else
+    {
+      (heth->RxFrameInfos).SegCount++;
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+    }
+  }
+
+  /* Set ETH HAL State to Ready */
+  heth->State = HAL_ETH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+
+  /* Return function status */
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  Gets the Received frame in interrupt mode.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth)
+{
+  uint32_t descriptorscancounter = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(heth);
+
+  /* Set ETH HAL State to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+
+  /* Scan descriptors owned by CPU */
+  while (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && (descriptorscancounter < ETH_RXBUFNB))
+  {
+    /* Just for security */
+    descriptorscancounter++;
+
+    /* Check if first segment in frame */
+    /* ((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)) */
+    if((heth->RxDesc->Status & (ETH_DMARXDESC_FS | ETH_DMARXDESC_LS)) == (uint32_t)ETH_DMARXDESC_FS)
+    {
+      heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
+      heth->RxFrameInfos.SegCount = 1;
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+    }
+    /* Check if intermediate segment */
+    /* ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)&& ((heth->RxDesc->Status & ETH_DMARXDESC_FS) == (uint32_t)RESET)) */
+    else if ((heth->RxDesc->Status & (ETH_DMARXDESC_LS | ETH_DMARXDESC_FS)) == (uint32_t)RESET)
+    {
+      /* Increment segment count */
+      (heth->RxFrameInfos.SegCount)++;
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*)(heth->RxDesc->Buffer2NextDescAddr);
+    }
+    /* Should be last segment */
+    else
+    {
+      /* Last segment */
+      heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
+
+      /* Increment segment count */
+      (heth->RxFrameInfos.SegCount)++;
+
+      /* Check if last segment is first segment: one segment contains the frame */
+      if ((heth->RxFrameInfos.SegCount) == 1)
+      {
+        heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
+      }
+
+      /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
+      heth->RxFrameInfos.length = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4;
+
+      /* Get the address of the buffer start address */
+      heth->RxFrameInfos.buffer =((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
+
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+
+      /* Set HAL State to Ready */
+      heth->State = HAL_ETH_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+
+      /* Return function status */
+      return HAL_OK;
+    }
+  }
+
+  /* Set HAL State to Ready */
+  heth->State = HAL_ETH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+
+  /* Return function status */
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  This function handles ETH interrupt request.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth)
+{
+  /* Frame received */
+  if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_R))
+  {
+    /* Receive complete callback */
+    HAL_ETH_RxCpltCallback(heth);
+
+     /* Clear the Eth DMA Rx IT pending bits */
+    __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_R);
+
+    /* Set HAL State to Ready */
+    heth->State = HAL_ETH_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+
+  }
+  /* Frame transmitted */
+  else if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_T))
+  {
+    /* Transfer complete callback */
+    HAL_ETH_TxCpltCallback(heth);
+
+    /* Clear the Eth DMA Tx IT pending bits */
+    __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_T);
+
+    /* Set HAL State to Ready */
+    heth->State = HAL_ETH_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+  }
+
+  /* Clear the interrupt flags */
+  __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_NIS);
+
+  /* ETH DMA Error */
+  if(__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_AIS))
+  {
+    /* Ethernet Error callback */
+    HAL_ETH_ErrorCallback(heth);
+
+    /* Clear the interrupt flags */
+    __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_FLAG_AIS);
+
+    /* Set HAL State to Ready */
+    heth->State = HAL_ETH_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+  }
+}
+
+/**
+  * @brief  Tx Transfer completed callbacks.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_TxCpltCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  Rx Transfer completed callbacks.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_TxCpltCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  Ethernet transfer error callbacks
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_TxCpltCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  Reads a PHY register
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param PHYReg: PHY register address, is the index of one of the 32 PHY register.
+  *                This parameter can be one of the following values:
+  *                   PHY_BCR: Transceiver Basic Control Register,
+  *                   PHY_BSR: Transceiver Basic Status Register.
+  *                   More PHY register could be read depending on the used PHY
+  * @param RegValue: PHY register value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue)
+{
+  uint32_t tmpreg1 = 0;
+  uint32_t tickstart = 0;
+
+  /* Check parameters */
+  assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
+
+  /* Check the ETH peripheral state */
+  if(heth->State == HAL_ETH_STATE_BUSY_RD)
+  {
+    return HAL_BUSY;
+  }
+  /* Set ETH HAL State to BUSY_RD */
+  heth->State = HAL_ETH_STATE_BUSY_RD;
+
+  /* Get the ETHERNET MACMIIAR value */
+  tmpreg1 = heth->Instance->MACMIIAR;
+
+  /* Keep only the CSR Clock Range CR[2:0] bits value */
+  tmpreg1 &= ~ETH_MACMIIAR_CR_MASK;
+
+  /* Prepare the MII address register value */
+  tmpreg1 |=(((uint32_t)heth->Init.PhyAddress << 11) & ETH_MACMIIAR_PA); /* Set the PHY device address   */
+  tmpreg1 |=(((uint32_t)PHYReg<<6) & ETH_MACMIIAR_MR);                   /* Set the PHY register address */
+  tmpreg1 &= ~ETH_MACMIIAR_MW;                                           /* Set the read mode            */
+  tmpreg1 |= ETH_MACMIIAR_MB;                                            /* Set the MII Busy bit         */
+
+  /* Write the result value into the MII Address register */
+  heth->Instance->MACMIIAR = tmpreg1;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check for the Busy flag */
+  while((tmpreg1 & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
+  {
+    /* Check for the Timeout */
+    if((HAL_GetTick() - tickstart ) > PHY_READ_TO)
+    {
+      heth->State= HAL_ETH_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+
+      return HAL_TIMEOUT;
+    }
+
+    tmpreg1 = heth->Instance->MACMIIAR;
+  }
+
+  /* Get MACMIIDR value */
+  *RegValue = (uint16_t)(heth->Instance->MACMIIDR);
+
+  /* Set ETH HAL State to READY */
+  heth->State = HAL_ETH_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Writes to a PHY register.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  PHYReg: PHY register address, is the index of one of the 32 PHY register.
+  *          This parameter can be one of the following values:
+  *             PHY_BCR: Transceiver Control Register.
+  *             More PHY register could be written depending on the used PHY
+  * @param  RegValue: the value to write
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue)
+{
+  uint32_t tmpreg1 = 0;
+  uint32_t tickstart = 0;
+
+  /* Check parameters */
+  assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
+
+  /* Check the ETH peripheral state */
+  if(heth->State == HAL_ETH_STATE_BUSY_WR)
+  {
+    return HAL_BUSY;
+  }
+  /* Set ETH HAL State to BUSY_WR */
+  heth->State = HAL_ETH_STATE_BUSY_WR;
+
+  /* Get the ETHERNET MACMIIAR value */
+  tmpreg1 = heth->Instance->MACMIIAR;
+
+  /* Keep only the CSR Clock Range CR[2:0] bits value */
+  tmpreg1 &= ~ETH_MACMIIAR_CR_MASK;
+
+  /* Prepare the MII register address value */
+  tmpreg1 |=(((uint32_t)heth->Init.PhyAddress<<11) & ETH_MACMIIAR_PA); /* Set the PHY device address */
+  tmpreg1 |=(((uint32_t)PHYReg<<6) & ETH_MACMIIAR_MR);                 /* Set the PHY register address */
+  tmpreg1 |= ETH_MACMIIAR_MW;                                          /* Set the write mode */
+  tmpreg1 |= ETH_MACMIIAR_MB;                                          /* Set the MII Busy bit */
+
+  /* Give the value to the MII data register */
+  heth->Instance->MACMIIDR = (uint16_t)RegValue;
+
+  /* Write the result value into the MII Address register */
+  heth->Instance->MACMIIAR = tmpreg1;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check for the Busy flag */
+  while((tmpreg1 & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
+  {
+    /* Check for the Timeout */
+    if((HAL_GetTick() - tickstart ) > PHY_WRITE_TO)
+    {
+      heth->State= HAL_ETH_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+
+      return HAL_TIMEOUT;
+    }
+
+    tmpreg1 = heth->Instance->MACMIIAR;
+  }
+
+  /* Set ETH HAL State to READY */
+  heth->State = HAL_ETH_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief    Peripheral Control functions
+ *
+ at verbatim
+ ===============================================================================
+                  ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Enable MAC and DMA transmission and reception.
+          HAL_ETH_Start();
+      (+) Disable MAC and DMA transmission and reception.
+          HAL_ETH_Stop();
+      (+) Set the MAC configuration in runtime mode
+          HAL_ETH_ConfigMAC();
+      (+) Set the DMA configuration in runtime mode
+          HAL_ETH_ConfigDMA();
+
+ at endverbatim
+  * @{
+  */
+
+ /**
+  * @brief  Enables Ethernet MAC and DMA reception/transmission
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth)
+{
+  /* Process Locked */
+  __HAL_LOCK(heth);
+
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+
+  /* Enable transmit state machine of the MAC for transmission on the MII */
+  ETH_MACTransmissionEnable(heth);
+
+  /* Enable receive state machine of the MAC for reception from the MII */
+  ETH_MACReceptionEnable(heth);
+
+  /* Flush Transmit FIFO */
+  ETH_FlushTransmitFIFO(heth);
+
+  /* Start DMA transmission */
+  ETH_DMATransmissionEnable(heth);
+
+  /* Start DMA reception */
+  ETH_DMAReceptionEnable(heth);
+
+  /* Set the ETH state to READY*/
+  heth->State= HAL_ETH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop Ethernet MAC and DMA reception/transmission
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth)
+{
+  /* Process Locked */
+  __HAL_LOCK(heth);
+
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+
+  /* Stop DMA transmission */
+  ETH_DMATransmissionDisable(heth);
+
+  /* Stop DMA reception */
+  ETH_DMAReceptionDisable(heth);
+
+  /* Disable receive state machine of the MAC for reception from the MII */
+  ETH_MACReceptionDisable(heth);
+
+  /* Flush Transmit FIFO */
+  ETH_FlushTransmitFIFO(heth);
+
+  /* Disable transmit state machine of the MAC for transmission on the MII */
+  ETH_MACTransmissionDisable(heth);
+
+  /* Set the ETH state*/
+  heth->State = HAL_ETH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set ETH MAC Configuration.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  macconf: MAC Configuration structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf)
+{
+  uint32_t tmpreg1 = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(heth);
+
+  /* Set the ETH peripheral state to BUSY */
+  heth->State= HAL_ETH_STATE_BUSY;
+
+  assert_param(IS_ETH_SPEED(heth->Init.Speed));
+  assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode));
+
+  if (macconf != NULL)
+  {
+    /* Check the parameters */
+    assert_param(IS_ETH_WATCHDOG(macconf->Watchdog));
+    assert_param(IS_ETH_JABBER(macconf->Jabber));
+    assert_param(IS_ETH_INTER_FRAME_GAP(macconf->InterFrameGap));
+    assert_param(IS_ETH_CARRIER_SENSE(macconf->CarrierSense));
+    assert_param(IS_ETH_RECEIVE_OWN(macconf->ReceiveOwn));
+    assert_param(IS_ETH_LOOPBACK_MODE(macconf->LoopbackMode));
+    assert_param(IS_ETH_CHECKSUM_OFFLOAD(macconf->ChecksumOffload));
+    assert_param(IS_ETH_RETRY_TRANSMISSION(macconf->RetryTransmission));
+    assert_param(IS_ETH_AUTOMATIC_PADCRC_STRIP(macconf->AutomaticPadCRCStrip));
+    assert_param(IS_ETH_BACKOFF_LIMIT(macconf->BackOffLimit));
+    assert_param(IS_ETH_DEFERRAL_CHECK(macconf->DeferralCheck));
+    assert_param(IS_ETH_RECEIVE_ALL(macconf->ReceiveAll));
+    assert_param(IS_ETH_SOURCE_ADDR_FILTER(macconf->SourceAddrFilter));
+    assert_param(IS_ETH_CONTROL_FRAMES(macconf->PassControlFrames));
+    assert_param(IS_ETH_BROADCAST_FRAMES_RECEPTION(macconf->BroadcastFramesReception));
+    assert_param(IS_ETH_DESTINATION_ADDR_FILTER(macconf->DestinationAddrFilter));
+    assert_param(IS_ETH_PROMISCUOUS_MODE(macconf->PromiscuousMode));
+    assert_param(IS_ETH_MULTICAST_FRAMES_FILTER(macconf->MulticastFramesFilter));
+    assert_param(IS_ETH_UNICAST_FRAMES_FILTER(macconf->UnicastFramesFilter));
+    assert_param(IS_ETH_PAUSE_TIME(macconf->PauseTime));
+    assert_param(IS_ETH_ZEROQUANTA_PAUSE(macconf->ZeroQuantaPause));
+    assert_param(IS_ETH_PAUSE_LOW_THRESHOLD(macconf->PauseLowThreshold));
+    assert_param(IS_ETH_UNICAST_PAUSE_FRAME_DETECT(macconf->UnicastPauseFrameDetect));
+    assert_param(IS_ETH_RECEIVE_FLOWCONTROL(macconf->ReceiveFlowControl));
+    assert_param(IS_ETH_TRANSMIT_FLOWCONTROL(macconf->TransmitFlowControl));
+    assert_param(IS_ETH_VLAN_TAG_COMPARISON(macconf->VLANTagComparison));
+    assert_param(IS_ETH_VLAN_TAG_IDENTIFIER(macconf->VLANTagIdentifier));
+
+    /*------------------------ ETHERNET MACCR Configuration --------------------*/
+    /* Get the ETHERNET MACCR value */
+    tmpreg1 = (heth->Instance)->MACCR;
+    /* Clear WD, PCE, PS, TE and RE bits */
+    tmpreg1 &= ETH_MACCR_CLEAR_MASK;
+
+    tmpreg1 |= (uint32_t)(macconf->Watchdog |
+                         macconf->Jabber |
+                         macconf->InterFrameGap |
+                         macconf->CarrierSense |
+                         (heth->Init).Speed |
+                         macconf->ReceiveOwn |
+                         macconf->LoopbackMode |
+                         (heth->Init).DuplexMode |
+                         macconf->ChecksumOffload |
+                         macconf->RetryTransmission |
+                         macconf->AutomaticPadCRCStrip |
+                         macconf->BackOffLimit |
+                         macconf->DeferralCheck);
+
+    /* Write to ETHERNET MACCR */
+    (heth->Instance)->MACCR = (uint32_t)tmpreg1;
+
+    /* Wait until the write operation will be taken into account :
+    at least four TX_CLK/RX_CLK clock cycles */
+    tmpreg1 = (heth->Instance)->MACCR;
+    HAL_Delay(ETH_REG_WRITE_DELAY);
+    (heth->Instance)->MACCR = tmpreg1;
+
+    /*----------------------- ETHERNET MACFFR Configuration --------------------*/
+    /* Write to ETHERNET MACFFR */
+    (heth->Instance)->MACFFR = (uint32_t)(macconf->ReceiveAll |
+                                          macconf->SourceAddrFilter |
+                                          macconf->PassControlFrames |
+                                          macconf->BroadcastFramesReception |
+                                          macconf->DestinationAddrFilter |
+                                          macconf->PromiscuousMode |
+                                          macconf->MulticastFramesFilter |
+                                          macconf->UnicastFramesFilter);
+
+     /* Wait until the write operation will be taken into account :
+     at least four TX_CLK/RX_CLK clock cycles */
+     tmpreg1 = (heth->Instance)->MACFFR;
+     HAL_Delay(ETH_REG_WRITE_DELAY);
+     (heth->Instance)->MACFFR = tmpreg1;
+
+     /*--------------- ETHERNET MACHTHR and MACHTLR Configuration ---------------*/
+     /* Write to ETHERNET MACHTHR */
+     (heth->Instance)->MACHTHR = (uint32_t)macconf->HashTableHigh;
+
+     /* Write to ETHERNET MACHTLR */
+     (heth->Instance)->MACHTLR = (uint32_t)macconf->HashTableLow;
+     /*----------------------- ETHERNET MACFCR Configuration --------------------*/
+
+     /* Get the ETHERNET MACFCR value */
+     tmpreg1 = (heth->Instance)->MACFCR;
+     /* Clear xx bits */
+     tmpreg1 &= ETH_MACFCR_CLEAR_MASK;
+
+     tmpreg1 |= (uint32_t)((macconf->PauseTime << 16) |
+                          macconf->ZeroQuantaPause |
+                          macconf->PauseLowThreshold |
+                          macconf->UnicastPauseFrameDetect |
+                          macconf->ReceiveFlowControl |
+                          macconf->TransmitFlowControl);
+
+     /* Write to ETHERNET MACFCR */
+     (heth->Instance)->MACFCR = (uint32_t)tmpreg1;
+
+     /* Wait until the write operation will be taken into account :
+     at least four TX_CLK/RX_CLK clock cycles */
+     tmpreg1 = (heth->Instance)->MACFCR;
+     HAL_Delay(ETH_REG_WRITE_DELAY);
+     (heth->Instance)->MACFCR = tmpreg1;
+
+     /*----------------------- ETHERNET MACVLANTR Configuration -----------------*/
+     (heth->Instance)->MACVLANTR = (uint32_t)(macconf->VLANTagComparison |
+                                              macconf->VLANTagIdentifier);
+
+      /* Wait until the write operation will be taken into account :
+      at least four TX_CLK/RX_CLK clock cycles */
+      tmpreg1 = (heth->Instance)->MACVLANTR;
+      HAL_Delay(ETH_REG_WRITE_DELAY);
+      (heth->Instance)->MACVLANTR = tmpreg1;
+  }
+  else /* macconf == NULL : here we just configure Speed and Duplex mode */
+  {
+    /*------------------------ ETHERNET MACCR Configuration --------------------*/
+    /* Get the ETHERNET MACCR value */
+    tmpreg1 = (heth->Instance)->MACCR;
+
+    /* Clear FES and DM bits */
+    tmpreg1 &= ~((uint32_t)0x00004800);
+
+    tmpreg1 |= (uint32_t)(heth->Init.Speed | heth->Init.DuplexMode);
+
+    /* Write to ETHERNET MACCR */
+    (heth->Instance)->MACCR = (uint32_t)tmpreg1;
+
+    /* Wait until the write operation will be taken into account:
+    at least four TX_CLK/RX_CLK clock cycles */
+    tmpreg1 = (heth->Instance)->MACCR;
+    HAL_Delay(ETH_REG_WRITE_DELAY);
+    (heth->Instance)->MACCR = tmpreg1;
+  }
+
+  /* Set the ETH state to Ready */
+  heth->State= HAL_ETH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets ETH DMA Configuration.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  dmaconf: DMA Configuration structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf)
+{
+  uint32_t tmpreg1 = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(heth);
+
+  /* Set the ETH peripheral state to BUSY */
+  heth->State= HAL_ETH_STATE_BUSY;
+
+  /* Check parameters */
+  assert_param(IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(dmaconf->DropTCPIPChecksumErrorFrame));
+  assert_param(IS_ETH_RECEIVE_STORE_FORWARD(dmaconf->ReceiveStoreForward));
+  assert_param(IS_ETH_FLUSH_RECEIVE_FRAME(dmaconf->FlushReceivedFrame));
+  assert_param(IS_ETH_TRANSMIT_STORE_FORWARD(dmaconf->TransmitStoreForward));
+  assert_param(IS_ETH_TRANSMIT_THRESHOLD_CONTROL(dmaconf->TransmitThresholdControl));
+  assert_param(IS_ETH_FORWARD_ERROR_FRAMES(dmaconf->ForwardErrorFrames));
+  assert_param(IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(dmaconf->ForwardUndersizedGoodFrames));
+  assert_param(IS_ETH_RECEIVE_THRESHOLD_CONTROL(dmaconf->ReceiveThresholdControl));
+  assert_param(IS_ETH_SECOND_FRAME_OPERATE(dmaconf->SecondFrameOperate));
+  assert_param(IS_ETH_ADDRESS_ALIGNED_BEATS(dmaconf->AddressAlignedBeats));
+  assert_param(IS_ETH_FIXED_BURST(dmaconf->FixedBurst));
+  assert_param(IS_ETH_RXDMA_BURST_LENGTH(dmaconf->RxDMABurstLength));
+  assert_param(IS_ETH_TXDMA_BURST_LENGTH(dmaconf->TxDMABurstLength));
+  assert_param(IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(dmaconf->EnhancedDescriptorFormat));
+  assert_param(IS_ETH_DMA_DESC_SKIP_LENGTH(dmaconf->DescriptorSkipLength));
+  assert_param(IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(dmaconf->DMAArbitration));
+
+  /*----------------------- ETHERNET DMAOMR Configuration --------------------*/
+  /* Get the ETHERNET DMAOMR value */
+  tmpreg1 = (heth->Instance)->DMAOMR;
+  /* Clear xx bits */
+  tmpreg1 &= ETH_DMAOMR_CLEAR_MASK;
+
+  tmpreg1 |= (uint32_t)(dmaconf->DropTCPIPChecksumErrorFrame |
+                       dmaconf->ReceiveStoreForward |
+                       dmaconf->FlushReceivedFrame |
+                       dmaconf->TransmitStoreForward |
+                       dmaconf->TransmitThresholdControl |
+                       dmaconf->ForwardErrorFrames |
+                       dmaconf->ForwardUndersizedGoodFrames |
+                       dmaconf->ReceiveThresholdControl |
+                       dmaconf->SecondFrameOperate);
+
+  /* Write to ETHERNET DMAOMR */
+  (heth->Instance)->DMAOMR = (uint32_t)tmpreg1;
+
+  /* Wait until the write operation will be taken into account:
+  at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->DMAOMR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->DMAOMR = tmpreg1;
+
+  /*----------------------- ETHERNET DMABMR Configuration --------------------*/
+  (heth->Instance)->DMABMR = (uint32_t)(dmaconf->AddressAlignedBeats |
+                                         dmaconf->FixedBurst |
+                                         dmaconf->RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
+                                         dmaconf->TxDMABurstLength |
+                                         dmaconf->EnhancedDescriptorFormat |
+                                         (dmaconf->DescriptorSkipLength << 2) |
+                                         dmaconf->DMAArbitration |
+                                         ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
+
+   /* Wait until the write operation will be taken into account:
+      at least four TX_CLK/RX_CLK clock cycles */
+   tmpreg1 = (heth->Instance)->DMABMR;
+   HAL_Delay(ETH_REG_WRITE_DELAY);
+   (heth->Instance)->DMABMR = tmpreg1;
+
+   /* Set the ETH state to Ready */
+   heth->State= HAL_ETH_STATE_READY;
+
+   /* Process Unlocked */
+   __HAL_UNLOCK(heth);
+
+   /* Return function status */
+   return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Exported_Functions_Group4 Peripheral State functions
+  *  @brief   Peripheral State functions
+  *
+  @verbatim
+  ===============================================================================
+                         ##### Peripheral State functions #####
+  ===============================================================================
+  [..]
+  This subsection permits to get in run-time the status of the peripheral
+  and the data flow.
+       (+) Get the ETH handle state:
+           HAL_ETH_GetState();
+
+
+  @endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the ETH HAL state
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL state
+  */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth)
+{
+  /* Return ETH state */
+  return heth->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup ETH_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Configures Ethernet MAC and DMA with default parameters.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  err: Ethernet Init error
+  * @retval HAL status
+  */
+static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err)
+{
+  ETH_MACInitTypeDef macinit;
+  ETH_DMAInitTypeDef dmainit;
+  uint32_t tmpreg1 = 0;
+
+  if (err != ETH_SUCCESS) /* Auto-negotiation failed */
+  {
+    /* Set Ethernet duplex mode to Full-duplex */
+    (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;
+
+    /* Set Ethernet speed to 100M */
+    (heth->Init).Speed = ETH_SPEED_100M;
+  }
+
+  /* Ethernet MAC default initialization **************************************/
+  macinit.Watchdog = ETH_WATCHDOG_ENABLE;
+  macinit.Jabber = ETH_JABBER_ENABLE;
+  macinit.InterFrameGap = ETH_INTERFRAMEGAP_96BIT;
+  macinit.CarrierSense = ETH_CARRIERSENCE_ENABLE;
+  macinit.ReceiveOwn = ETH_RECEIVEOWN_ENABLE;
+  macinit.LoopbackMode = ETH_LOOPBACKMODE_DISABLE;
+  if(heth->Init.ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
+  {
+    macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_ENABLE;
+  }
+  else
+  {
+    macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_DISABLE;
+  }
+  macinit.RetryTransmission = ETH_RETRYTRANSMISSION_DISABLE;
+  macinit.AutomaticPadCRCStrip = ETH_AUTOMATICPADCRCSTRIP_DISABLE;
+  macinit.BackOffLimit = ETH_BACKOFFLIMIT_10;
+  macinit.DeferralCheck = ETH_DEFFERRALCHECK_DISABLE;
+  macinit.ReceiveAll = ETH_RECEIVEAll_DISABLE;
+  macinit.SourceAddrFilter = ETH_SOURCEADDRFILTER_DISABLE;
+  macinit.PassControlFrames = ETH_PASSCONTROLFRAMES_BLOCKALL;
+  macinit.BroadcastFramesReception = ETH_BROADCASTFRAMESRECEPTION_ENABLE;
+  macinit.DestinationAddrFilter = ETH_DESTINATIONADDRFILTER_NORMAL;
+  macinit.PromiscuousMode = ETH_PROMISCUOUS_MODE_DISABLE;
+  macinit.MulticastFramesFilter = ETH_MULTICASTFRAMESFILTER_PERFECT;
+  macinit.UnicastFramesFilter = ETH_UNICASTFRAMESFILTER_PERFECT;
+  macinit.HashTableHigh = 0x0;
+  macinit.HashTableLow = 0x0;
+  macinit.PauseTime = 0x0;
+  macinit.ZeroQuantaPause = ETH_ZEROQUANTAPAUSE_DISABLE;
+  macinit.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS4;
+  macinit.UnicastPauseFrameDetect = ETH_UNICASTPAUSEFRAMEDETECT_DISABLE;
+  macinit.ReceiveFlowControl = ETH_RECEIVEFLOWCONTROL_DISABLE;
+  macinit.TransmitFlowControl = ETH_TRANSMITFLOWCONTROL_DISABLE;
+  macinit.VLANTagComparison = ETH_VLANTAGCOMPARISON_16BIT;
+  macinit.VLANTagIdentifier = 0x0;
+
+  /*------------------------ ETHERNET MACCR Configuration --------------------*/
+  /* Get the ETHERNET MACCR value */
+  tmpreg1 = (heth->Instance)->MACCR;
+  /* Clear WD, PCE, PS, TE and RE bits */
+  tmpreg1 &= ETH_MACCR_CLEAR_MASK;
+  /* Set the WD bit according to ETH Watchdog value */
+  /* Set the JD: bit according to ETH Jabber value */
+  /* Set the IFG bit according to ETH InterFrameGap value */
+  /* Set the DCRS bit according to ETH CarrierSense value */
+  /* Set the FES bit according to ETH Speed value */
+  /* Set the DO bit according to ETH ReceiveOwn value */
+  /* Set the LM bit according to ETH LoopbackMode value */
+  /* Set the DM bit according to ETH Mode value */
+  /* Set the IPCO bit according to ETH ChecksumOffload value */
+  /* Set the DR bit according to ETH RetryTransmission value */
+  /* Set the ACS bit according to ETH AutomaticPadCRCStrip value */
+  /* Set the BL bit according to ETH BackOffLimit value */
+  /* Set the DC bit according to ETH DeferralCheck value */
+  tmpreg1 |= (uint32_t)(macinit.Watchdog |
+                       macinit.Jabber |
+                       macinit.InterFrameGap |
+                       macinit.CarrierSense |
+                       (heth->Init).Speed |
+                       macinit.ReceiveOwn |
+                       macinit.LoopbackMode |
+                       (heth->Init).DuplexMode |
+                       macinit.ChecksumOffload |
+                       macinit.RetryTransmission |
+                       macinit.AutomaticPadCRCStrip |
+                       macinit.BackOffLimit |
+                       macinit.DeferralCheck);
+
+  /* Write to ETHERNET MACCR */
+  (heth->Instance)->MACCR = (uint32_t)tmpreg1;
+
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->MACCR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg1;
+
+  /*----------------------- ETHERNET MACFFR Configuration --------------------*/
+  /* Set the RA bit according to ETH ReceiveAll value */
+  /* Set the SAF and SAIF bits according to ETH SourceAddrFilter value */
+  /* Set the PCF bit according to ETH PassControlFrames value */
+  /* Set the DBF bit according to ETH BroadcastFramesReception value */
+  /* Set the DAIF bit according to ETH DestinationAddrFilter value */
+  /* Set the PR bit according to ETH PromiscuousMode value */
+  /* Set the PM, HMC and HPF bits according to ETH MulticastFramesFilter value */
+  /* Set the HUC and HPF bits according to ETH UnicastFramesFilter value */
+  /* Write to ETHERNET MACFFR */
+  (heth->Instance)->MACFFR = (uint32_t)(macinit.ReceiveAll |
+                                        macinit.SourceAddrFilter |
+                                        macinit.PassControlFrames |
+                                        macinit.BroadcastFramesReception |
+                                        macinit.DestinationAddrFilter |
+                                        macinit.PromiscuousMode |
+                                        macinit.MulticastFramesFilter |
+                                        macinit.UnicastFramesFilter);
+
+   /* Wait until the write operation will be taken into account:
+      at least four TX_CLK/RX_CLK clock cycles */
+   tmpreg1 = (heth->Instance)->MACFFR;
+   HAL_Delay(ETH_REG_WRITE_DELAY);
+   (heth->Instance)->MACFFR = tmpreg1;
+
+   /*--------------- ETHERNET MACHTHR and MACHTLR Configuration --------------*/
+   /* Write to ETHERNET MACHTHR */
+   (heth->Instance)->MACHTHR = (uint32_t)macinit.HashTableHigh;
+
+   /* Write to ETHERNET MACHTLR */
+   (heth->Instance)->MACHTLR = (uint32_t)macinit.HashTableLow;
+   /*----------------------- ETHERNET MACFCR Configuration -------------------*/
+
+   /* Get the ETHERNET MACFCR value */
+   tmpreg1 = (heth->Instance)->MACFCR;
+   /* Clear xx bits */
+   tmpreg1 &= ETH_MACFCR_CLEAR_MASK;
+
+   /* Set the PT bit according to ETH PauseTime value */
+   /* Set the DZPQ bit according to ETH ZeroQuantaPause value */
+   /* Set the PLT bit according to ETH PauseLowThreshold value */
+   /* Set the UP bit according to ETH UnicastPauseFrameDetect value */
+   /* Set the RFE bit according to ETH ReceiveFlowControl value */
+   /* Set the TFE bit according to ETH TransmitFlowControl value */
+   tmpreg1 |= (uint32_t)((macinit.PauseTime << 16) |
+                        macinit.ZeroQuantaPause |
+                        macinit.PauseLowThreshold |
+                        macinit.UnicastPauseFrameDetect |
+                        macinit.ReceiveFlowControl |
+                        macinit.TransmitFlowControl);
+
+   /* Write to ETHERNET MACFCR */
+   (heth->Instance)->MACFCR = (uint32_t)tmpreg1;
+
+   /* Wait until the write operation will be taken into account:
+   at least four TX_CLK/RX_CLK clock cycles */
+   tmpreg1 = (heth->Instance)->MACFCR;
+   HAL_Delay(ETH_REG_WRITE_DELAY);
+   (heth->Instance)->MACFCR = tmpreg1;
+
+   /*----------------------- ETHERNET MACVLANTR Configuration ----------------*/
+   /* Set the ETV bit according to ETH VLANTagComparison value */
+   /* Set the VL bit according to ETH VLANTagIdentifier value */
+   (heth->Instance)->MACVLANTR = (uint32_t)(macinit.VLANTagComparison |
+                                            macinit.VLANTagIdentifier);
+
+    /* Wait until the write operation will be taken into account:
+       at least four TX_CLK/RX_CLK clock cycles */
+    tmpreg1 = (heth->Instance)->MACVLANTR;
+    HAL_Delay(ETH_REG_WRITE_DELAY);
+    (heth->Instance)->MACVLANTR = tmpreg1;
+
+    /* Ethernet DMA default initialization ************************************/
+    dmainit.DropTCPIPChecksumErrorFrame = ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE;
+    dmainit.ReceiveStoreForward = ETH_RECEIVESTOREFORWARD_ENABLE;
+    dmainit.FlushReceivedFrame = ETH_FLUSHRECEIVEDFRAME_ENABLE;
+    dmainit.TransmitStoreForward = ETH_TRANSMITSTOREFORWARD_ENABLE;
+    dmainit.TransmitThresholdControl = ETH_TRANSMITTHRESHOLDCONTROL_64BYTES;
+    dmainit.ForwardErrorFrames = ETH_FORWARDERRORFRAMES_DISABLE;
+    dmainit.ForwardUndersizedGoodFrames = ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE;
+    dmainit.ReceiveThresholdControl = ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES;
+    dmainit.SecondFrameOperate = ETH_SECONDFRAMEOPERARTE_ENABLE;
+    dmainit.AddressAlignedBeats = ETH_ADDRESSALIGNEDBEATS_ENABLE;
+    dmainit.FixedBurst = ETH_FIXEDBURST_ENABLE;
+    dmainit.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT;
+    dmainit.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT;
+    dmainit.EnhancedDescriptorFormat = ETH_DMAENHANCEDDESCRIPTOR_ENABLE;
+    dmainit.DescriptorSkipLength = 0x0;
+    dmainit.DMAArbitration = ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1;
+
+    /* Get the ETHERNET DMAOMR value */
+    tmpreg1 = (heth->Instance)->DMAOMR;
+    /* Clear xx bits */
+    tmpreg1 &= ETH_DMAOMR_CLEAR_MASK;
+
+    /* Set the DT bit according to ETH DropTCPIPChecksumErrorFrame value */
+    /* Set the RSF bit according to ETH ReceiveStoreForward value */
+    /* Set the DFF bit according to ETH FlushReceivedFrame value */
+    /* Set the TSF bit according to ETH TransmitStoreForward value */
+    /* Set the TTC bit according to ETH TransmitThresholdControl value */
+    /* Set the FEF bit according to ETH ForwardErrorFrames value */
+    /* Set the FUF bit according to ETH ForwardUndersizedGoodFrames value */
+    /* Set the RTC bit according to ETH ReceiveThresholdControl value */
+    /* Set the OSF bit according to ETH SecondFrameOperate value */
+    tmpreg1 |= (uint32_t)(dmainit.DropTCPIPChecksumErrorFrame |
+                         dmainit.ReceiveStoreForward |
+                         dmainit.FlushReceivedFrame |
+                         dmainit.TransmitStoreForward |
+                         dmainit.TransmitThresholdControl |
+                         dmainit.ForwardErrorFrames |
+                         dmainit.ForwardUndersizedGoodFrames |
+                         dmainit.ReceiveThresholdControl |
+                         dmainit.SecondFrameOperate);
+
+    /* Write to ETHERNET DMAOMR */
+    (heth->Instance)->DMAOMR = (uint32_t)tmpreg1;
+
+    /* Wait until the write operation will be taken into account:
+       at least four TX_CLK/RX_CLK clock cycles */
+    tmpreg1 = (heth->Instance)->DMAOMR;
+    HAL_Delay(ETH_REG_WRITE_DELAY);
+    (heth->Instance)->DMAOMR = tmpreg1;
+
+    /*----------------------- ETHERNET DMABMR Configuration ------------------*/
+    /* Set the AAL bit according to ETH AddressAlignedBeats value */
+    /* Set the FB bit according to ETH FixedBurst value */
+    /* Set the RPBL and 4*PBL bits according to ETH RxDMABurstLength value */
+    /* Set the PBL and 4*PBL bits according to ETH TxDMABurstLength value */
+    /* Set the Enhanced DMA descriptors bit according to ETH EnhancedDescriptorFormat value*/
+    /* Set the DSL bit according to ETH DesciptorSkipLength value */
+    /* Set the PR and DA bits according to ETH DMAArbitration value */
+    (heth->Instance)->DMABMR = (uint32_t)(dmainit.AddressAlignedBeats |
+                                          dmainit.FixedBurst |
+                                          dmainit.RxDMABurstLength |    /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
+                                          dmainit.TxDMABurstLength |
+                                          dmainit.EnhancedDescriptorFormat |
+                                          (dmainit.DescriptorSkipLength << 2) |
+                                          dmainit.DMAArbitration |
+                                          ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
+
+     /* Wait until the write operation will be taken into account:
+        at least four TX_CLK/RX_CLK clock cycles */
+     tmpreg1 = (heth->Instance)->DMABMR;
+     HAL_Delay(ETH_REG_WRITE_DELAY);
+     (heth->Instance)->DMABMR = tmpreg1;
+
+     if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
+     {
+       /* Enable the Ethernet Rx Interrupt */
+       __HAL_ETH_DMA_ENABLE_IT((heth), ETH_DMA_IT_NIS | ETH_DMA_IT_R);
+     }
+
+     /* Initialize MAC address in ethernet MAC */
+     ETH_MACAddressConfig(heth, ETH_MAC_ADDRESS0, heth->Init.MACAddr);
+}
+
+/**
+  * @brief  Configures the selected MAC address.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  MacAddr: The MAC address to configure
+  *          This parameter can be one of the following values:
+  *             @arg ETH_MAC_Address0: MAC Address0
+  *             @arg ETH_MAC_Address1: MAC Address1
+  *             @arg ETH_MAC_Address2: MAC Address2
+  *             @arg ETH_MAC_Address3: MAC Address3
+  * @param  Addr: Pointer to MAC address buffer data (6 bytes)
+  * @retval HAL status
+  */
+static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr)
+{
+  uint32_t tmpreg1;
+
+  /* Check the parameters */
+  assert_param(IS_ETH_MAC_ADDRESS0123(MacAddr));
+
+  /* Calculate the selected MAC address high register */
+  tmpreg1 = ((uint32_t)Addr[5] << 8) | (uint32_t)Addr[4];
+  /* Load the selected MAC address high register */
+  (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_HBASE + MacAddr))) = tmpreg1;
+  /* Calculate the selected MAC address low register */
+  tmpreg1 = ((uint32_t)Addr[3] << 24) | ((uint32_t)Addr[2] << 16) | ((uint32_t)Addr[1] << 8) | Addr[0];
+
+  /* Load the selected MAC address low register */
+  (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_LBASE + MacAddr))) = tmpreg1;
+}
+
+/**
+  * @brief  Enables the MAC transmission.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth)
+{
+  __IO uint32_t tmpreg1 = 0;
+
+  /* Enable the MAC transmission */
+  (heth->Instance)->MACCR |= ETH_MACCR_TE;
+
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->MACCR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg1;
+}
+
+/**
+  * @brief  Disables the MAC transmission.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth)
+{
+  __IO uint32_t tmpreg1 = 0;
+
+  /* Disable the MAC transmission */
+  (heth->Instance)->MACCR &= ~ETH_MACCR_TE;
+
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->MACCR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg1;
+}
+
+/**
+  * @brief  Enables the MAC reception.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth)
+{
+  __IO uint32_t tmpreg1 = 0;
+
+  /* Enable the MAC reception */
+  (heth->Instance)->MACCR |= ETH_MACCR_RE;
+
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->MACCR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg1;
+}
+
+/**
+  * @brief  Disables the MAC reception.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth)
+{
+  __IO uint32_t tmpreg1 = 0;
+
+  /* Disable the MAC reception */
+  (heth->Instance)->MACCR &= ~ETH_MACCR_RE;
+
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->MACCR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg1;
+}
+
+/**
+  * @brief  Enables the DMA transmission.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth)
+{
+  /* Enable the DMA transmission */
+  (heth->Instance)->DMAOMR |= ETH_DMAOMR_ST;
+}
+
+/**
+  * @brief  Disables the DMA transmission.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth)
+{
+  /* Disable the DMA transmission */
+  (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_ST;
+}
+
+/**
+  * @brief  Enables the DMA reception.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth)
+{
+  /* Enable the DMA reception */
+  (heth->Instance)->DMAOMR |= ETH_DMAOMR_SR;
+}
+
+/**
+  * @brief  Disables the DMA reception.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth)
+{
+  /* Disable the DMA reception */
+  (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_SR;
+}
+
+/**
+  * @brief  Clears the ETHERNET transmit FIFO.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth)
+{
+  __IO uint32_t tmpreg1 = 0;
+
+  /* Set the Flush Transmit FIFO bit */
+  (heth->Instance)->DMAOMR |= ETH_DMAOMR_FTF;
+
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->DMAOMR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->DMAOMR = tmpreg1;
+}
+
+/**
+  * @}
+  */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#endif /* HAL_ETH_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c
new file mode 100644
index 0000000..24923df
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c
@@ -0,0 +1,761 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   FLASH HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the internal FLASH memory:
+  *           + Program operations functions
+  *           + Memory Control functions
+  *           + Peripheral Errors functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### FLASH peripheral features #####
+  ==============================================================================
+
+  [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
+       to the Flash memory. It implements the erase and program Flash memory operations
+       and the read and write protection mechanisms.
+
+  [..] The Flash memory interface accelerates code execution with a system of instruction
+       prefetch and cache lines.
+
+  [..] The FLASH main features are:
+      (+) Flash memory read operations
+      (+) Flash memory program/erase operations
+      (+) Read / write protections
+      (+) Prefetch on I-Code
+      (+) 64 cache lines of 128 bits on I-Code
+      (+) 8 cache lines of 128 bits on D-Code
+
+
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      This driver provides functions and macros to configure and program the FLASH
+      memory of all STM32F4xx devices.
+
+      (#) FLASH Memory IO Programming functions:
+           (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
+                HAL_FLASH_Lock() functions
+           (++) Program functions: byte, half word, word and double word
+           (++) There Two modes of programming :
+            (+++) Polling mode using HAL_FLASH_Program() function
+            (+++) Interrupt mode using HAL_FLASH_Program_IT() function
+
+      (#) Interrupts and flags management functions :
+           (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
+           (++) Wait for last FLASH operation according to its status
+           (++) Get error flag status by calling HAL_SetErrorCode()
+
+    [..]
+      In addition to these functions, this driver includes a set of macros allowing
+      to handle the following operations:
+       (+) Set the latency
+       (+) Enable/Disable the prefetch buffer
+       (+) Enable/Disable the Instruction cache and the Data cache
+       (+) Reset the Instruction cache and the Data cache
+       (+) Enable/Disable the FLASH interrupts
+       (+) Monitor the FLASH flags status
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FLASH FLASH
+  * @brief FLASH HAL module driver
+  * @{
+  */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Constants
+  * @{
+  */
+#define SECTOR_MASK               ((uint32_t)0xFFFFFF07)
+#define FLASH_TIMEOUT_VALUE       ((uint32_t)50000)/* 50 s */
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Variables
+  * @{
+  */
+/* Variable used for Erase sectors under interruption */
+FLASH_ProcessTypeDef pFlash;
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+  * @{
+  */
+/* Program operations */
+static void   FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
+static void   FLASH_Program_Word(uint32_t Address, uint32_t Data);
+static void   FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
+static void   FLASH_Program_Byte(uint32_t Address, uint8_t Data);
+static void   FLASH_SetErrorCode(void);
+
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
+  * @{
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
+ *  @brief   Programming operation functions
+ *
+ at verbatim
+ ===============================================================================
+                  ##### Programming operation functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the FLASH
+    program operations.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Program byte, halfword, word or double word at a specified address
+  * @param  TypeProgram:  Indicate the way to program at a specified address.
+  *                           This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address:  specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed
+  *
+  * @retval HAL_StatusTypeDef HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
+    {
+      /*Program byte (8-bit) at a specified address.*/
+        FLASH_Program_Byte(Address, (uint8_t) Data);
+    }
+    else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+    {
+      /*Program halfword (16-bit) at a specified address.*/
+      FLASH_Program_HalfWord(Address, (uint16_t) Data);
+    }
+    else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+    {
+      /*Program word (32-bit) at a specified address.*/
+      FLASH_Program_Word(Address, (uint32_t) Data);
+    }
+    else
+    {
+      /*Program double word (64-bit) at a specified address.*/
+      FLASH_Program_DoubleWord(Address, Data);
+    }
+
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+    /* If the program operation is completed, disable the PG Bit */
+    FLASH->CR &= (~FLASH_CR_PG);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+
+  return status;
+}
+
+/**
+  * @brief   Program byte, halfword, word or double word at a specified address  with interrupt enabled.
+  * @param  TypeProgram:  Indicate the way to program at a specified address.
+  *                           This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address:  specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed
+  *
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+  /* Enable End of FLASH Operation interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+
+  /* Enable Error source interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+
+  /* Clear pending flags (if any) */
+  __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP    | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
+                         FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_PGSERR);
+
+  pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
+  pFlash.Address = Address;
+
+  if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
+  {
+    /*Program byte (8-bit) at a specified address.*/
+      FLASH_Program_Byte(Address, (uint8_t) Data);
+  }
+  else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+  {
+    /*Program halfword (16-bit) at a specified address.*/
+    FLASH_Program_HalfWord(Address, (uint16_t) Data);
+  }
+  else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+  {
+    /*Program word (32-bit) at a specified address.*/
+    FLASH_Program_Word(Address, (uint32_t) Data);
+  }
+  else
+  {
+    /*Program double word (64-bit) at a specified address.*/
+    FLASH_Program_DoubleWord(Address, Data);
+  }
+
+  return status;
+}
+
+/**
+  * @brief This function handles FLASH interrupt request.
+  * @retval None
+  */
+void HAL_FLASH_IRQHandler(void)
+{
+  uint32_t temp;
+
+  /* If the program operation is completed, disable the PG Bit */
+  FLASH->CR &= (~FLASH_CR_PG);
+
+  /* If the erase operation is completed, disable the SER Bit */
+  FLASH->CR &= (~FLASH_CR_SER);
+  FLASH->CR &= SECTOR_MASK;
+
+  /* if the erase operation is completed, disable the MER Bit */
+  FLASH->CR &= (~FLASH_MER_BIT);
+
+  /* Check FLASH End of Operation flag  */
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+  {
+    if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
+    {
+      /*Nb of sector to erased can be decreased*/
+      pFlash.NbSectorsToErase--;
+
+      /* Check if there are still sectors to erase*/
+      if(pFlash.NbSectorsToErase != 0)
+      {
+        temp = pFlash.Sector;
+        /*Indicate user which sector has been erased*/
+        HAL_FLASH_EndOfOperationCallback(temp);
+
+        /* Clear pending flags (if any) */
+        __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
+         FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_PGSERR);
+
+        /*Increment sector number*/
+        pFlash.Sector++;
+        temp = pFlash.Sector;
+        FLASH_Erase_Sector(temp, pFlash.VoltageForErase);
+      }
+      else
+      {
+        /*No more sectors to Erase, user callback can be called.*/
+        /*Reset Sector and stop Erase sectors procedure*/
+        pFlash.Sector = temp = 0xFFFFFFFF;
+        pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(temp);
+        /* Clear FLASH End of Operation pending bit */
+        __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+      }
+    }
+    else
+    {
+      if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
+      {
+        /*MassErase ended. Return the selected bank*/
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(pFlash.Bank);
+      }
+      else
+      {
+        /*Program ended. Return the selected address*/
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+      }
+      pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+      /* Clear FLASH End of Operation pending bit */
+      __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+    }
+
+  }
+
+  /* Check FLASH operation error flags */
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
+  {
+    if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
+    {
+      /*return the faulty sector*/
+      temp = pFlash.Sector;
+      pFlash.Sector = 0xFFFFFFFF;
+    }
+    else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
+    {
+      /*return the faulty bank*/
+      temp = pFlash.Bank;
+    }
+    else
+    {
+      /*return the faulty address*/
+      temp = pFlash.Address;
+    }
+
+    /*Save the Error code*/
+    FLASH_SetErrorCode();
+
+    /* FLASH error interrupt user callback */
+    HAL_FLASH_OperationErrorCallback(temp);
+    /* Clear FLASH error pending bits */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR  | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR |\
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR);
+
+    /*Stop the procedure ongoing*/
+    pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+  }
+
+  if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+  {
+    /* Disable End of FLASH Operation interrupt */
+    __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP);
+
+    /* Disable Error source interrupt */
+    __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(&pFlash);
+  }
+
+}
+
+/**
+  * @brief  FLASH end of operation interrupt callback
+  * @param  ReturnValue: The value saved in this parameter depends on the ongoing procedure
+  *                  Mass Erase: Bank number which has been requested to erase
+  *                  Sectors Erase: Sector which has been erased
+  *                    (if 0xFFFFFFFF, it means that all the selected sectors have been erased)
+  *                  Program: Address which was selected for data program
+  * @retval None
+  */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  FLASH operation error interrupt callback
+  * @param  ReturnValue: The value saved in this parameter depends on the ongoing procedure
+  *                 Mass Erase: Bank number which has been requested to erase
+  *                 Sectors Erase: Sector number which returned an error
+  *                 Program: Address which was selected for data program
+  * @retval None
+  */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
+ *  @brief   management functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the FLASH
+    memory operations.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Unlock the FLASH control register access
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+  if((FLASH->CR & FLASH_CR_LOCK) != RESET)
+  {
+    /* Authorize the FLASH Registers access */
+    FLASH->KEYR = FLASH_KEY1;
+    FLASH->KEYR = FLASH_KEY2;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Locks the FLASH control register access
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+  /* Set the LOCK Bit to lock the FLASH Registers access */
+  FLASH->CR |= FLASH_CR_LOCK;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Unlock the FLASH Option Control Registers access.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+  if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET)
+  {
+    /* Authorizes the Option Byte register programming */
+    FLASH->OPTKEYR = FLASH_OPT_KEY1;
+    FLASH->OPTKEYR = FLASH_OPT_KEY2;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Lock the FLASH Option Control Registers access.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+  /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
+  FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Launch the option byte loading.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+  /* Set the OPTSTRT bit in OPTCR register */
+  *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT;
+
+  /* Wait for last operation to be completed */
+  return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions
+ *  @brief   Peripheral Errors functions
+ *
+ at verbatim
+ ===============================================================================
+                ##### Peripheral Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection permits to get in run-time Errors of the FLASH peripheral.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Get the specific FLASH error flag.
+  * @retval FLASH_ErrorCode: The returned value can be a combination of:
+  *            @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP)
+  *            @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag
+  *            @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag
+  *            @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag
+  *            @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag
+  *            @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag
+  */
+uint32_t HAL_FLASH_GetError(void)
+{
+   return pFlash.ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  Wait for a FLASH operation to complete.
+  * @param  Timeout: maximum flash operationtimeout
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Clear Error Code */
+  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+  /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+     Even if the FLASH operation fails, the BUSY flag will be reset and an error
+     flag will be set */
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
+  {
+    /*Save the error code*/
+    FLASH_SetErrorCode();
+    return HAL_ERROR;
+  }
+
+  /* If there is an error flag set */
+  return HAL_OK;
+
+}
+
+/**
+  * @brief  Program a double word (64-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V and an External Vpp is present.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,
+  *         the erase operation is performed before the program one.
+  *
+  * @param  Address: specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+
+  /* If the previous operation is completed, proceed to program the new data */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint64_t*)Address = Data;
+}
+
+
+/**
+  * @brief  Program word (32-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,
+  *         the erase operation is performed before the program one.
+  *
+  * @param  Address: specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_Word(uint32_t Address, uint32_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+
+  /* If the previous operation is completed, proceed to program the new data */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= FLASH_PSIZE_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint32_t*)Address = Data;
+}
+
+/**
+  * @brief  Program a half-word (16-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,
+  *         the erase operation is performed before the program one.
+  *
+  * @param  Address: specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+
+  /* If the previous operation is completed, proceed to program the new data */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= FLASH_PSIZE_HALF_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint16_t*)Address = Data;
+}
+
+/**
+  * @brief  Program byte (8-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,
+  *         the erase operation is performed before the program one.
+  *
+  * @param  Address: specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_Byte(uint32_t Address, uint8_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+
+  /* If the previous operation is completed, proceed to program the new data */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= FLASH_PSIZE_BYTE;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint8_t*)Address = Data;
+}
+
+/**
+  * @brief  Set the specific FLASH error flag.
+  * @retval None
+  */
+static void FLASH_SetErrorCode(void)
+{
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET)
+  {
+   pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
+  }
+
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET)
+  {
+   pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
+  }
+
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP;
+  }
+
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS;
+  }
+
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
+  }
+
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION;
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c
new file mode 100644
index 0000000..0fadd8f
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c
@@ -0,0 +1,1316 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Extended FLASH HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the FLASH extension peripheral:
+  *           + Extended programming operations functions
+  *
+  @verbatim
+  ==============================================================================
+                   ##### Flash Extension features #####
+  ==============================================================================
+
+  [..] Comparing to other previous devices, the FLASH interface for STM32F427xx/437xx and
+       STM32F429xx/439xx devices contains the following additional features
+
+       (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write
+           capability (RWW)
+       (+) Dual bank memory organization
+       (+) PCROP protection for all banks
+
+                      ##### How to use this driver #####
+  ==============================================================================
+  [..] This driver provides functions to configure and program the FLASH memory
+       of all STM32F427xx/437xx andSTM32F429xx/439xx devices. It includes
+      (#) FLASH Memory Erase functions:
+           (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
+                HAL_FLASH_Lock() functions
+           (++) Erase function: Erase sector, erase all sectors
+           (++) There are two modes of erase :
+             (+++) Polling Mode using HAL_FLASHEx_Erase()
+             (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT()
+
+      (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to :
+           (++) Set/Reset the write protection
+           (++) Set the Read protection Level
+           (++) Set the BOR level
+           (++) Program the user Option Bytes
+      (#) Advanced Option Bytes Programming functions: Use HAL_FLASHEx_AdvOBProgram() to :
+       (++) Extended space (bank 2) erase function
+       (++) Full FLASH space (2 Mo) erase (bank 1 and bank 2)
+       (++) Dual Boot activation
+       (++) Write protection configuration for bank 2
+       (++) PCROP protection configuration and control for both banks
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FLASHEx FLASHEx
+  * @brief FLASH HAL Extension module driver
+  * @{
+  */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Constants
+  * @{
+  */
+#define SECTOR_MASK               ((uint32_t)0xFFFFFF07)
+#define FLASH_TIMEOUT_VALUE       ((uint32_t)50000)/* 50 s */
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Variables
+  * @{
+  */
+extern FLASH_ProcessTypeDef pFlash;
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Functions
+  * @{
+  */
+/* Option bytes control */
+static void               FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks);
+static HAL_StatusTypeDef  FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks);
+static HAL_StatusTypeDef  FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks);
+static HAL_StatusTypeDef  FLASH_OB_RDP_LevelConfig(uint8_t Level);
+static HAL_StatusTypeDef  FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby);
+static HAL_StatusTypeDef  FLASH_OB_BOR_LevelConfig(uint8_t Level);
+static uint8_t            FLASH_OB_GetUser(void);
+static uint16_t           FLASH_OB_GetWRP(void);
+static uint8_t            FLASH_OB_GetRDP(void);
+static uint8_t            FLASH_OB_GetBOR(void);
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+static HAL_StatusTypeDef  FLASH_OB_EnablePCROP(uint32_t Sector);
+static HAL_StatusTypeDef  FLASH_OB_DisablePCROP(uint32_t Sector);
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks);
+static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks);
+static HAL_StatusTypeDef  FLASH_OB_BootConfig(uint8_t BootConfig);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+extern HAL_StatusTypeDef         FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
+  * @{
+  */
+
+/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions
+ *  @brief   Extended IO operation functions
+ *
+ at verbatim
+ ===============================================================================
+                ##### Extended programming operation functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the Extension FLASH
+    programming operations Operations.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Perform a mass erase or erase the specified FLASH memory sectors
+  * @param[in]  pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
+  *         contains the configuration information for the erasing.
+  *
+  * @param[out]  SectorError: pointer to variable  that
+  *         contains the configuration information on faulty sector in case of error
+  *         (0xFFFFFFFF means that all the sectors have been correctly erased)
+  *
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  uint32_t index = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    /*Initialization of SectorError variable*/
+    *SectorError = 0xFFFFFFFF;
+
+    if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+    {
+      /*Mass erase to be done*/
+      FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks);
+
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+      /* if the erase operation is completed, disable the MER Bit */
+      FLASH->CR &= (~FLASH_MER_BIT);
+    }
+    else
+    {
+      /* Check the parameters */
+      assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
+
+      /* Erase by sector by sector to be done*/
+      for(index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++)
+      {
+        FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange);
+
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+        /* If the erase operation is completed, disable the SER Bit */
+        FLASH->CR &= (~FLASH_CR_SER);
+        FLASH->CR &= SECTOR_MASK;
+
+        if(status != HAL_OK)
+        {
+          /* In case of error, stop erase procedure and return the faulty sector*/
+          *SectorError = index;
+          break;
+        }
+      }
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+
+  return status;
+}
+
+/**
+  * @brief  Perform a mass erase or erase the specified FLASH memory sectors  with interrupt enabled
+  * @param  pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
+  *         contains the configuration information for the erasing.
+  *
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+  /* Enable End of FLASH Operation interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+
+  /* Enable Error source interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+
+  /* Clear pending flags (if any) */
+  __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP    | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
+                         FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_PGSERR);
+
+  if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+  {
+    /*Mass erase to be done*/
+    pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
+    pFlash.Bank = pEraseInit->Banks;
+    FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks);
+  }
+  else
+  {
+    /* Erase by sector to be done*/
+
+    /* Check the parameters */
+    assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
+
+    pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE;
+    pFlash.NbSectorsToErase = pEraseInit->NbSectors;
+    pFlash.Sector = pEraseInit->Sector;
+    pFlash.VoltageForErase = (uint8_t)pEraseInit->VoltageRange;
+
+    /*Erase 1st sector and wait for IT*/
+    FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->VoltageRange);
+  }
+
+  return status;
+}
+
+/**
+  * @brief   Program option bytes
+  * @param  pOBInit: pointer to an FLASH_OBInitStruct structure that
+  *         contains the configuration information for the programming.
+  *
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
+
+  /*Write protection configuration*/
+  if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
+  {
+    assert_param(IS_WRPSTATE(pOBInit->WRPState));
+    if(pOBInit->WRPState == OB_WRPSTATE_ENABLE)
+    {
+      /*Enable of Write protection on the selected Sector*/
+      status = FLASH_OB_EnableWRP(pOBInit->WRPSector, pOBInit->Banks);
+    }
+    else
+    {
+      /*Disable of Write protection on the selected Sector*/
+      status = FLASH_OB_DisableWRP(pOBInit->WRPSector, pOBInit->Banks);
+    }
+  }
+
+  /*Read protection configuration*/
+  if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
+  {
+    status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
+  }
+
+  /*USER  configuration*/
+  if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
+  {
+    status = FLASH_OB_UserConfig(pOBInit->USERConfig&OB_IWDG_SW,
+                                     pOBInit->USERConfig&OB_STOP_NO_RST,
+                                     pOBInit->USERConfig&OB_STDBY_NO_RST);
+  }
+
+  /*BOR Level  configuration*/
+  if((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR)
+  {
+    status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+
+  return status;
+}
+
+/**
+  * @brief   Get the Option byte configuration
+  * @param  pOBInit: pointer to an FLASH_OBInitStruct structure that
+  *         contains the configuration information for the programming.
+  *
+  * @retval None
+  */
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+  pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_BOR;
+
+  /*Get WRP*/
+  pOBInit->WRPSector = (uint32_t)FLASH_OB_GetWRP();
+
+  /*Get RDP Level*/
+  pOBInit->RDPLevel = (uint32_t)FLASH_OB_GetRDP();
+
+  /*Get USER*/
+  pOBInit->USERConfig = (uint8_t)FLASH_OB_GetUser();
+
+  /*Get BOR Level*/
+  pOBInit->BORLevel = (uint32_t)FLASH_OB_GetBOR();
+}
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+/**
+  * @brief   Program option bytes
+  * @param  pAdvOBInit: pointer to an FLASH_AdvOBProgramInitTypeDef structure that
+  *         contains the configuration information for the programming.
+  *
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Check the parameters */
+  assert_param(IS_OBEX(pAdvOBInit->OptionType));
+
+  /*Program PCROP option byte*/
+  if(((pAdvOBInit->OptionType) & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP)
+  {
+    /* Check the parameters */
+    assert_param(IS_PCROPSTATE(pAdvOBInit->PCROPState));
+    if((pAdvOBInit->PCROPState) == OB_PCROP_STATE_ENABLE)
+    {
+      /*Enable of Write protection on the selected Sector*/
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+      status = FLASH_OB_EnablePCROP(pAdvOBInit->Sectors);
+#else  /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+      status = FLASH_OB_EnablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks);
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+    }
+    else
+    {
+      /*Disable of Write protection on the selected Sector*/
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+      status = FLASH_OB_DisablePCROP(pAdvOBInit->Sectors);
+#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+      status = FLASH_OB_DisablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks);
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+    }
+  }
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+  /*Program BOOT config option byte*/
+  if(((pAdvOBInit->OptionType) & OPTIONBYTE_BOOTCONFIG) == OPTIONBYTE_BOOTCONFIG)
+  {
+    status = FLASH_OB_BootConfig(pAdvOBInit->BootConfig);
+  }
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+  return status;
+}
+
+/**
+  * @brief   Get the OBEX byte configuration
+  * @param  pAdvOBInit: pointer to an FLASH_AdvOBProgramInitTypeDef structure that
+  *         contains the configuration information for the programming.
+  *
+  * @retval None
+  */
+void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit)
+{
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+  /*Get Sector*/
+  pAdvOBInit->Sectors = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS));
+#else  /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+  /*Get Sector for Bank1*/
+  pAdvOBInit->SectorsBank1 = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS));
+
+  /*Get Sector for Bank2*/
+  pAdvOBInit->SectorsBank2 = (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS));
+
+  /*Get Boot config OB*/
+  pAdvOBInit->BootConfig = *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS;
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+}
+
+/**
+  * @brief  Select the Protection Mode
+  *
+  * @note   After PCROP activated Option Byte modification NOT POSSIBLE! excepted
+  *         Global Read Out Protection modification (from level1 to level0)
+  * @note   Once SPRMOD bit is active unprotection of a protected sector is not possible
+  * @note   Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag
+  * @note   This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx devices.
+  *
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void)
+{
+  uint8_t optiontmp = 0xFF;
+
+  /* Mask SPRMOD bit */
+  optiontmp =  (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F);
+
+  /* Update Option Byte */
+  *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_SELECTED | optiontmp);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deselect the Protection Mode
+  *
+  * @note   After PCROP activated Option Byte modification NOT POSSIBLE! excepted
+  *         Global Read Out Protection modification (from level1 to level0)
+  * @note   Once SPRMOD bit is active unprotection of a protected sector is not possible
+  * @note   Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag
+  * @note   This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx devices.
+  *
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void)
+{
+  uint8_t optiontmp = 0xFF;
+
+  /* Mask SPRMOD bit */
+  optiontmp =  (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F);
+
+  /* Update Option Byte */
+  *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_DESELECTED | optiontmp);
+
+  return HAL_OK;
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/**
+  * @brief  Returns the FLASH Write Protection Option Bytes value for Bank 2
+  * @note   This function can be used only for STM32F427X and STM32F429X devices.
+  * @retval The FLASH Write Protection  Option Bytes value
+  */
+uint16_t HAL_FLASHEx_OB_GetBank2WRP(void)
+{
+  /* Return the FLASH write protection Register value */
+  return (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS));
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+  * @}
+  */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/**
+  * @brief  Full erase of FLASH memory sectors
+  * @param  VoltageRange: The device voltage range which defines the erase parallelism.
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+  *                                  the operation will be done by byte (8-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+  *                                  the operation will be done by half word (16-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+  *                                  the operation will be done by word (32-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+  *                                  the operation will be done by double word (64-bit)
+  *
+  * @param  Banks: Banks to be erased
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_BANK_1: Bank1 to be erased
+  *            @arg FLASH_BANK_2: Bank2 to be erased
+  *            @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased
+  *
+  * @retval HAL Status
+  */
+static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks)
+{
+  uint32_t tmp_psize = 0;
+
+  /* Check the parameters */
+  assert_param(IS_VOLTAGERANGE(VoltageRange));
+  assert_param(IS_FLASH_BANK(Banks));
+
+  /* if the previous operation is completed, proceed to erase all sectors */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= tmp_psize;
+  if(Banks == FLASH_BANK_BOTH)
+  {
+    /* bank1 & bank2 will be erased*/
+    FLASH->CR |= FLASH_MER_BIT;
+  }
+  else if(Banks == FLASH_BANK_1)
+  {
+    /*Only bank1 will be erased*/
+    FLASH->CR |= FLASH_CR_MER1;
+  }
+  else
+  {
+    /*Only bank2 will be erased*/
+    FLASH->CR |= FLASH_CR_MER2;
+  }
+  FLASH->CR |= FLASH_CR_STRT;
+}
+
+/**
+  * @brief  Erase the specified FLASH memory sector
+  * @param  Sector: FLASH sector to erase
+  *         The value of this parameter depend on device used within the same series
+  * @param  VoltageRange: The device voltage range which defines the erase parallelism.
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+  *                                  the operation will be done by byte (8-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+  *                                  the operation will be done by half word (16-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+  *                                  the operation will be done by word (32-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+  *                                  the operation will be done by double word (64-bit)
+  *
+  * @retval None
+  */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
+{
+  uint32_t tmp_psize = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_SECTOR(Sector));
+  assert_param(IS_VOLTAGERANGE(VoltageRange));
+
+  if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
+  {
+     tmp_psize = FLASH_PSIZE_BYTE;
+  }
+  else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
+  {
+    tmp_psize = FLASH_PSIZE_HALF_WORD;
+  }
+  else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
+  {
+    tmp_psize = FLASH_PSIZE_WORD;
+  }
+  else
+  {
+    tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
+  }
+
+  /* Need to add offset of 4 when sector higher than FLASH_SECTOR_11 */
+  if(Sector > FLASH_SECTOR_11)
+  {
+    Sector += 4;
+  }
+  /* If the previous operation is completed, proceed to erase the sector */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= tmp_psize;
+  FLASH->CR &= SECTOR_MASK;
+  FLASH->CR |= FLASH_CR_SER | (Sector << POSITION_VAL(FLASH_CR_SNB));
+  FLASH->CR |= FLASH_CR_STRT;
+}
+
+/**
+  * @brief  Enable the write protection of the desired bank1 or bank 2 sectors
+  *
+  * @note   When the memory read protection level is selected (RDP level = 1),
+  *         it is not possible to program or erase the flash sector i if CortexM4
+  *         debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+  * @note   Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
+  *
+  * @param  WRPSector: specifies the sector(s) to be write protected.
+  *          This parameter can be one of the following values:
+  *            @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23
+  *            @arg OB_WRP_SECTOR_All
+  * @note   BANK2 starts from OB_WRP_SECTOR_12
+  *
+  * @param  Banks: Enable write protection on all the sectors for the specific bank
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_BANK_1: WRP on all sectors of bank1
+  *            @arg FLASH_BANK_2: WRP on all sectors of bank2
+  *            @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
+  *
+  * @retval HAL FLASH State
+  */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_OB_WRP_SECTOR(WRPSector));
+  assert_param(IS_FLASH_BANK(Banks));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    if(((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) ||
+         (WRPSector < OB_WRP_SECTOR_12))
+    {
+       if(WRPSector == OB_WRP_SECTOR_All)
+       {
+          /*Write protection on all sector of BANK1*/
+          *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~(WRPSector>>12));
+       }
+       else
+       {
+          /*Write protection done on sectors of BANK1*/
+          *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~WRPSector);
+       }
+    }
+    else
+    {
+      /*Write protection done on sectors of BANK2*/
+      *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector>>12));
+    }
+
+    /*Write protection on all sector of BANK2*/
+    if((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH))
+    {
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+      if(status == HAL_OK)
+      {
+        *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector>>12));
+      }
+    }
+
+  }
+  return status;
+}
+
+/**
+  * @brief  Disable the write protection of the desired bank1 or bank 2 sectors
+  *
+  * @note   When the memory read protection level is selected (RDP level = 1),
+  *         it is not possible to program or erase the flash sector i if CortexM4
+  *         debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+  * @note   Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
+  *
+  * @param  WRPSector: specifies the sector(s) to be write protected.
+  *          This parameter can be one of the following values:
+  *            @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23
+  *            @arg OB_WRP_Sector_All
+  * @note   BANK2 starts from OB_WRP_SECTOR_12
+  *
+  * @param  Banks: Disable write protection on all the sectors for the specific bank
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_BANK_1: Bank1 to be erased
+  *            @arg FLASH_BANK_2: Bank2 to be erased
+  *            @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased
+  *
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_OB_WRP_SECTOR(WRPSector));
+  assert_param(IS_FLASH_BANK(Banks));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    if(((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) ||
+         (WRPSector < OB_WRP_SECTOR_12))
+    {
+       if(WRPSector == OB_WRP_SECTOR_All)
+       {
+          /*Write protection on all sector of BANK1*/
+          *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12);
+       }
+       else
+       {
+          /*Write protection done on sectors of BANK1*/
+          *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector;
+       }
+    }
+    else
+    {
+      /*Write protection done on sectors of BANK2*/
+      *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12);
+    }
+
+    /*Write protection on all sector  of BANK2*/
+    if((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH))
+    {
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+      if(status == HAL_OK)
+      {
+        *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12);
+      }
+    }
+
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Configure the Dual Bank Boot.
+  *
+  * @note   This function can be used only for STM32F42xxx/43xxx devices.
+  *
+  * @param  BootConfig specifies the Dual Bank Boot Option byte.
+  *          This parameter can be one of the following values:
+  *            @arg OB_Dual_BootEnabled: Dual Bank Boot Enable
+  *            @arg OB_Dual_BootDisabled: Dual Bank Boot Disabled
+  * @retval None
+  */
+static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_OB_BOOT(BootConfig));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    /* Set Dual Bank Boot */
+    *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BFB2);
+    *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= BootConfig;
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Enable the read/write protection (PCROP) of the desired
+  *         sectors of Bank 1 and/or Bank 2.
+  * @note   This function can be used only for STM32F42xxx/43xxx devices.
+  * @param  SectorBank1 Specifies the sector(s) to be read/write protected or unprotected for bank1.
+  *          This parameter can be one of the following values:
+  *            @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11
+  *            @arg OB_PCROP_SECTOR__All
+  * @param  SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2.
+  *          This parameter can be one of the following values:
+  *            @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23
+  *            @arg OB_PCROP_SECTOR__All
+  * @param  Banks Enable PCROP protection on all the sectors for the specific bank
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_BANK_1: WRP on all sectors of bank1
+  *            @arg FLASH_BANK_2: WRP on all sectors of bank2
+  *            @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
+  *
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  assert_param(IS_FLASH_BANK(Banks));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    if((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))
+    {
+      assert_param(IS_OB_PCROP(SectorBank1));
+      /*Write protection done on sectors of BANK1*/
+      *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)SectorBank1;
+    }
+    else
+    {
+      assert_param(IS_OB_PCROP(SectorBank2));
+      /*Write protection done on sectors of BANK2*/
+      *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2;
+    }
+
+    /*Write protection on all sector  of BANK2*/
+    if(Banks == FLASH_BANK_BOTH)
+    {
+      assert_param(IS_OB_PCROP(SectorBank2));
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+      if(status == HAL_OK)
+      {
+        /*Write protection done on sectors of BANK2*/
+        *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2;
+      }
+    }
+
+  }
+
+  return status;
+}
+
+
+/**
+  * @brief  Disable the read/write protection (PCROP) of the desired
+  *         sectors  of Bank 1 and/or Bank 2.
+  * @note   This function can be used only for STM32F42xxx/43xxx devices.
+  * @param  SectorBank1 specifies the sector(s) to be read/write protected or unprotected for bank1.
+  *          This parameter can be one of the following values:
+  *            @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11
+  *            @arg OB_PCROP_SECTOR__All
+  * @param  SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2.
+  *          This parameter can be one of the following values:
+  *            @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23
+  *            @arg OB_PCROP_SECTOR__All
+  * @param  Banks Disable PCROP protection on all the sectors for the specific bank
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_BANK_1: WRP on all sectors of bank1
+  *            @arg FLASH_BANK_2: WRP on all sectors of bank2
+  *            @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
+  *
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_BANK(Banks));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    if((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))
+    {
+      assert_param(IS_OB_PCROP(SectorBank1));
+      /*Write protection done on sectors of BANK1*/
+      *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~SectorBank1);
+    }
+    else
+    {
+      /*Write protection done on sectors of BANK2*/
+      assert_param(IS_OB_PCROP(SectorBank2));
+      *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2);
+    }
+
+    /*Write protection on all sector  of BANK2*/
+    if(Banks == FLASH_BANK_BOTH)
+    {
+      assert_param(IS_OB_PCROP(SectorBank2));
+     /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+      if(status == HAL_OK)
+      {
+        /*Write protection done on sectors of BANK2*/
+        *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2);
+      }
+    }
+
+  }
+
+  return status;
+
+}
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+/**
+  * @brief  Mass erase of FLASH memory
+  * @param  VoltageRange: The device voltage range which defines the erase parallelism.
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+  *                                  the operation will be done by byte (8-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+  *                                  the operation will be done by half word (16-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+  *                                  the operation will be done by word (32-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+  *                                  the operation will be done by double word (64-bit)
+  *
+  * @param  Banks: Banks to be erased
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_BANK_1: Bank1 to be erased
+  *
+  * @retval None
+  */
+static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks)
+{
+  uint32_t tmp_psize = 0;
+
+  /* Check the parameters */
+  assert_param(IS_VOLTAGERANGE(VoltageRange));
+  assert_param(IS_FLASH_BANK(Banks));
+
+  /* If the previous operation is completed, proceed to erase all sectors */
+   FLASH->CR &= CR_PSIZE_MASK;
+   FLASH->CR |= tmp_psize;
+   FLASH->CR |= FLASH_CR_MER;
+   FLASH->CR |= FLASH_CR_STRT;
+}
+
+/**
+  * @brief  Erase the specified FLASH memory sector
+  * @param  Sector: FLASH sector to erase
+  *         The value of this parameter depend on device used within the same series
+  * @param  VoltageRange: The device voltage range which defines the erase parallelism.
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
+  *                                  the operation will be done by byte (8-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+  *                                  the operation will be done by half word (16-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+  *                                  the operation will be done by word (32-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
+  *                                  the operation will be done by double word (64-bit)
+  *
+  * @retval None
+  */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
+{
+  uint32_t tmp_psize = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_SECTOR(Sector));
+  assert_param(IS_VOLTAGERANGE(VoltageRange));
+
+  if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
+  {
+     tmp_psize = FLASH_PSIZE_BYTE;
+  }
+  else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
+  {
+    tmp_psize = FLASH_PSIZE_HALF_WORD;
+  }
+  else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
+  {
+    tmp_psize = FLASH_PSIZE_WORD;
+  }
+  else
+  {
+    tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
+  }
+
+  /* If the previous operation is completed, proceed to erase the sector */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= tmp_psize;
+  FLASH->CR &= SECTOR_MASK;
+  FLASH->CR |= FLASH_CR_SER | (Sector << POSITION_VAL(FLASH_CR_SNB));
+  FLASH->CR |= FLASH_CR_STRT;
+}
+
+/**
+  * @brief  Enable the write protection of the desired bank 1 sectors
+  *
+  * @note   When the memory read protection level is selected (RDP level = 1),
+  *         it is not possible to program or erase the flash sector i if CortexM4
+  *         debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+  * @note   Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
+  *
+  * @param  WRPSector: specifies the sector(s) to be write protected.
+  *         The value of this parameter depend on device used within the same series
+  *
+  * @param  Banks: Enable write protection on all the sectors for the specific bank
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_BANK_1: WRP on all sectors of bank1
+  *
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_OB_WRP_SECTOR(WRPSector));
+  assert_param(IS_FLASH_BANK(Banks));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~WRPSector);
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Disable the write protection of the desired bank 1 sectors
+  *
+  * @note   When the memory read protection level is selected (RDP level = 1),
+  *         it is not possible to program or erase the flash sector i if CortexM4
+  *         debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+  * @note   Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
+  *
+  * @param  WRPSector: specifies the sector(s) to be write protected.
+  *         The value of this parameter depend on device used within the same series
+  *
+  * @param  Banks: Enable write protection on all the sectors for the specific bank
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_BANK_1: WRP on all sectors of bank1
+  *
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_OB_WRP_SECTOR(WRPSector));
+  assert_param(IS_FLASH_BANK(Banks));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector;
+  }
+
+  return status;
+}
+#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+/**
+  * @brief  Enable the read/write protection (PCROP) of the desired sectors.
+  * @note   This function can be used only for STM32F401xx devices.
+  * @param  Sector specifies the sector(s) to be read/write protected or unprotected.
+  *          This parameter can be one of the following values:
+  *            @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5
+  *            @arg OB_PCROP_Sector_All
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_OB_PCROP(Sector));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)Sector;
+  }
+
+  return status;
+}
+
+
+/**
+  * @brief  Disable the read/write protection (PCROP) of the desired sectors.
+  * @note   This function can be used only for STM32F401xx devices.
+  * @param  Sector specifies the sector(s) to be read/write protected or unprotected.
+  *          This parameter can be one of the following values:
+  *            @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5
+  *            @arg OB_PCROP_Sector_All
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_OB_PCROP(Sector));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~Sector);
+  }
+
+  return status;
+
+}
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+/**
+  * @brief  Set the read protection level.
+  * @param  Level: specifies the read protection level.
+  *          This parameter can be one of the following values:
+  *            @arg OB_RDP_LEVEL_0: No protection
+  *            @arg OB_RDP_LEVEL_1: Read protection of the memory
+  *            @arg OB_RDP_LEVEL_2: Full chip protection
+  *
+  * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
+  *
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_OB_RDP_LEVEL(Level));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    *(__IO uint8_t*)OPTCR_BYTE1_ADDRESS = Level;
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
+  * @param  Iwdg: Selects the IWDG mode
+  *          This parameter can be one of the following values:
+  *            @arg OB_IWDG_SW: Software IWDG selected
+  *            @arg OB_IWDG_HW: Hardware IWDG selected
+  * @param  Stop: Reset event when entering STOP mode.
+  *          This parameter  can be one of the following values:
+  *            @arg OB_STOP_NO_RST: No reset generated when entering in STOP
+  *            @arg OB_STOP_RST: Reset generated when entering in STOP
+  * @param  Stdby: Reset event when entering Standby mode.
+  *          This parameter  can be one of the following values:
+  *            @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY
+  *            @arg OB_STDBY_RST: Reset generated when entering in STANDBY
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby)
+{
+  uint8_t optiontmp = 0xFF;
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_OB_IWDG_SOURCE(Iwdg));
+  assert_param(IS_OB_STOP_SOURCE(Stop));
+  assert_param(IS_OB_STDBY_SOURCE(Stdby));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    /* Mask OPTLOCK, OPTSTRT, BOR_LEV and BFB2 bits */
+    optiontmp =  (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x1F);
+
+    /* Update User Option Byte */
+    *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS = Iwdg | (uint8_t)(Stdby | (uint8_t)(Stop | ((uint8_t)optiontmp)));
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Set the BOR Level.
+  * @param  Level: specifies the Option Bytes BOR Reset Level.
+  *          This parameter can be one of the following values:
+  *            @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
+  *            @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
+  *            @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
+  *            @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level)
+{
+  /* Check the parameters */
+  assert_param(IS_OB_BOR_LEVEL(Level));
+
+  /* Set the BOR Level */
+  *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BOR_LEV);
+  *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= Level;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Return the FLASH User Option Byte value.
+  * @retval uint8_t FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1)
+  *         and RST_STDBY(Bit2).
+  */
+static uint8_t FLASH_OB_GetUser(void)
+{
+  /* Return the User Option Byte */
+  return ((uint8_t)(FLASH->OPTCR & 0xE0));
+}
+
+/**
+  * @brief  Return the FLASH Write Protection Option Bytes value.
+  * @retval uint16_t FLASH Write Protection Option Bytes value
+  */
+static uint16_t FLASH_OB_GetWRP(void)
+{
+  /* Return the FLASH write protection Register value */
+  return (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS));
+}
+
+/**
+  * @brief  Returns the FLASH Read Protection level.
+  * @retval FLASH ReadOut Protection Status:
+  *         This parameter can be one of the following values:
+  *            @arg OB_RDP_LEVEL_0: No protection
+  *            @arg OB_RDP_LEVEL_1: Read protection of the memory
+  *            @arg OB_RDP_LEVEL_2: Full chip protection
+  */
+static uint8_t FLASH_OB_GetRDP(void)
+{
+  uint8_t readstatus = OB_RDP_LEVEL_0;
+
+  if((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_2))
+  {
+    readstatus = OB_RDP_LEVEL_2;
+  }
+  else if((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_1))
+  {
+    readstatus = OB_RDP_LEVEL_1;
+  }
+  else
+  {
+    readstatus = OB_RDP_LEVEL_0;
+  }
+
+  return readstatus;
+}
+
+/**
+  * @brief  Returns the FLASH BOR level.
+  * @retval uint8_t The FLASH BOR level:
+  *           - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
+  *           - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
+  *           - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
+  *           - OB_BOR_OFF   : Supply voltage ranges from 1.62 to 2.1 V
+  */
+static uint8_t FLASH_OB_GetBOR(void)
+{
+  /* Return the FLASH BOR level */
+  return (uint8_t)(*(__IO uint8_t *)(OPTCR_BYTE0_ADDRESS) & (uint8_t)0x0C);
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c
new file mode 100644
index 0000000..6fb67d3
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c
@@ -0,0 +1,194 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash_ramfunc.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   FLASH RAMFUNC module driver.
+  *          This file provides a FLASH firmware functions which should be
+  *          executed from internal SRAM
+  *            + Stop/Start the flash interface while System Run
+  *            + Enable/Disable the flash sleep while System Run
+  @verbatim
+  ==============================================================================
+                    ##### APIs executed from Internal RAM #####
+  ==============================================================================
+  [..]
+    *** ARM Compiler ***
+    --------------------
+    [..] RAM functions are defined using the toolchain options.
+         Functions that are be executed in RAM should reside in a separate
+         source module. Using the 'Options for File' dialog you can simply change
+         the 'Code / Const' area of a module to a memory space in physical RAM.
+         Available memory areas are declared in the 'Target' tab of the
+         Options for Target' dialog.
+
+    *** ICCARM Compiler ***
+    -----------------------
+    [..] RAM functions are defined using a specific toolchain keyword "__ramfunc".
+
+    *** GNU Compiler ***
+    --------------------
+    [..] RAM functions are defined using a specific toolchain attribute
+         "__attribute__((section(".RamFunc")))".
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FLASHRAMFUNC FLASH RAMFUNC
+  * @brief FLASH functions executed from RAM
+  * @{
+  */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+#if defined(STM32F411xE) || defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASHRAMFUNC_Exported_Functions FLASH RAMFUNC Exported Functions
+  * @{
+  */
+
+/** @defgroup FLASHRAMFUNC_Exported_Functions_Group1 Peripheral features functions executed from internal RAM
+  *  @brief Peripheral Extended features functions
+  *
+ at verbatim
+
+ ===============================================================================
+                      ##### ramfunc functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions that should be executed from RAM
+    transfers.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief Stop the flash interface while System Run
+  * @note  This mode is only available for STM32F411xx devices.
+  * @note  This mode couldn't be set while executing with the flash itself.
+  *        It should be done with specific routine executed from RAM.
+  * @retval None
+  */
+__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void)
+{
+  /* Enable Power ctrl clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  /* Stop the flash interface while System Run */
+  SET_BIT(PWR->CR, PWR_CR_FISSR);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Start the flash interface while System Run
+  * @note  This mode is only available for STM32F411xx devices.
+  * @note  This mode couldn't be set while executing with the flash itself.
+  *        It should be done with specific routine executed from RAM.
+  * @retval None
+  */
+__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void)
+{
+  /* Enable Power ctrl clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  /* Start the flash interface while System Run */
+  CLEAR_BIT(PWR->CR, PWR_CR_FISSR);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Enable the flash sleep while System Run
+  * @note  This mode is only available for STM32F411xx devices.
+  * @note  This mode could n't be set while executing with the flash itself.
+  *        It should be done with specific routine executed from RAM.
+  * @retval None
+  */
+__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void)
+{
+  /* Enable Power ctrl clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  /* Enable the flash sleep while System Run */
+  SET_BIT(PWR->CR, PWR_CR_FMSSR);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Disable the flash sleep while System Run
+  * @note  This mode is only available for STM32F411xx devices.
+  * @note  This mode couldn't be set while executing with the flash itself.
+  *        It should be done with specific routine executed from RAM.
+  * @retval None
+  */
+__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void)
+{
+  /* Enable Power ctrl clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  /* Disable the flash sleep while System Run */
+  CLEAR_BIT(PWR->CR, PWR_CR_FMSSR);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F411xE || STM32F446xx */
+#endif /* HAL_FLASH_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c.c
new file mode 100644
index 0000000..41dc90a
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c.c
@@ -0,0 +1,4098 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_fmpi2c.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   FMPI2C HAL module driver.
+  *
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Inter Integrated Circuit (FMPI2C) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The FMPI2C HAL driver can be used as follows:
+
+    (#) Declare a FMPI2C_HandleTypeDef handle structure, for example:
+        FMPI2C_HandleTypeDef  hfmpi2c;
+
+    (#)Initialize the FMPI2C low level resources by implement the HAL_FMPI2C_MspInit ()API:
+        (##) Enable the FMPI2Cx interface clock
+        (##) FMPI2C pins configuration
+            (+++) Enable the clock for the FMPI2C GPIOs
+            (+++) Configure FMPI2C pins as alternate function open-drain
+        (##) NVIC configuration if you need to use interrupt process
+            (+++) Configure the FMPI2Cx interrupt priority
+            (+++) Enable the NVIC FMPI2C IRQ Channel
+        (##) DMA Configuration if you need to use DMA process
+            (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
+            (+++) Enable the DMAx interface clock using
+            (+++) Configure the DMA handle parameters
+            (+++) Configure the DMA Tx or Rx Stream
+            (+++) Associate the initilalized DMA handle to the hfmpi2c DMA Tx or Rx handle
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream
+
+    (#) Configure the Communication Clock Timing, Own Address1, Master Adressing Mode, Dual Addressing mode,
+        Own Address2, Own Address2 Mask, General call and Nostretch mode in the hfmpi2c Init structure.
+
+    (#) Initialize the FMPI2C registers by calling the HAL_FMPI2C_Init() API:
+        (+++) These API's configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+            by calling the customed HAL_FMPI2C_MspInit(&hfmpi2c) API.
+
+    (#) To check if target device is ready for communication, use the function HAL_FMPI2C_IsDeviceReady()
+
+    (#) For FMPI2C IO and IO MEM operations, three mode of operations are available within this driver :
+
+    *** Polling mode IO operation ***
+    =================================
+    [..]
+      (+) Transmit in master mode an amount of data in blocking mode using HAL_FMPI2C_Master_Transmit()
+      (+) Receive in master mode an amount of data in blocking mode using HAL_FMPI2C_Master_Receive()
+      (+) Transmit in slave mode an amount of data in blocking mode using HAL_FMPI2C_Slave_Transmit()
+      (+) Receive in slave mode an amount of data in blocking mode using HAL_FMPI2C_Slave_Receive()
+
+    *** Polling mode IO MEM operation ***
+    =====================================
+    [..]
+      (+) Write an amount of data in blocking mode to a specific memory address using HAL_FMPI2C_Mem_Write()
+      (+) Read an amount of data in blocking mode from a specific memory address using HAL_FMPI2C_Mem_Read()
+
+
+    *** Interrupt mode IO operation ***
+    ===================================
+    [..]
+      (+) Transmit in master mode an amount of data in non blocking mode using HAL_FMPI2C_Master_Transmit_IT()
+      (+) At transmission end of transfer HAL_FMPI2C_MasterTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback
+      (+) Receive in master mode an amount of data in non blocking mode using HAL_FMPI2C_Master_Receive_IT()
+      (+) At reception end of transfer HAL_FMPI2C_MasterRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback
+      (+) Transmit in slave mode an amount of data in non blocking mode using HAL_FMPI2C_Slave_Transmit_IT()
+      (+) At transmission end of transfer HAL_FMPI2C_SlaveTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback
+      (+) Receive in slave mode an amount of data in non blocking mode using HAL_FMPI2C_Slave_Receive_IT()
+      (+) At reception end of transfer HAL_FMPI2C_SlaveRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback
+      (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback
+
+    *** Interrupt mode IO MEM operation ***
+    =======================================
+    [..]
+      (+) Write an amount of data in no-blocking mode with Interrupt to a specific memory address using
+          HAL_FMPI2C_Mem_Write_IT()
+      (+) At MEM end of write transfer HAL_FMPI2C_MemTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_MemTxCpltCallback
+      (+) Read an amount of data in no-blocking mode with Interrupt from a specific memory address using
+          HAL_FMPI2C_Mem_Read_IT()
+      (+) At MEM end of read transfer HAL_FMPI2C_MemRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_MemRxCpltCallback
+      (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback
+
+    *** DMA mode IO operation ***
+    ==============================
+    [..]
+      (+) Transmit in master mode an amount of data in non blocking mode (DMA) using
+          HAL_FMPI2C_Master_Transmit_DMA()
+      (+) At transmission end of transfer HAL_FMPI2C_MasterTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback
+      (+) Receive in master mode an amount of data in non blocking mode (DMA) using
+          HAL_FMPI2C_Master_Receive_DMA()
+      (+) At reception end of transfer HAL_FMPI2C_MasterRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback
+      (+) Transmit in slave mode an amount of data in non blocking mode (DMA) using
+          HAL_FMPI2C_Slave_Transmit_DMA()
+      (+) At transmission end of transfer HAL_FMPI2C_SlaveTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback
+      (+) Receive in slave mode an amount of data in non blocking mode (DMA) using
+          HAL_FMPI2C_Slave_Receive_DMA()
+      (+) At reception end of transfer HAL_FMPI2C_SlaveRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback
+      (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback
+
+    *** DMA mode IO MEM operation ***
+    =================================
+    [..]
+      (+) Write an amount of data in no-blocking mode with DMA to a specific memory address using
+          HAL_FMPI2C_Mem_Write_DMA()
+      (+) At MEM end of write transfer HAL_FMPI2C_MemTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_MemTxCpltCallback
+      (+) Read an amount of data in no-blocking mode with DMA from a specific memory address using
+          HAL_FMPI2C_Mem_Read_DMA()
+      (+) At MEM end of read transfer HAL_FMPI2C_MemRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_MemRxCpltCallback
+      (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback
+
+
+     *** FMPI2C HAL driver macros list ***
+     ==================================
+     [..]
+       Below the list of most used macros in FMPI2C HAL driver.
+
+      (+) __HAL_FMPI2C_ENABLE: Enable the FMPI2C peripheral
+      (+) __HAL_FMPI2C_DISABLE: Disable the FMPI2C peripheral
+      (+) __HAL_FMPI2C_GET_FLAG : Checks whether the specified FMPI2C flag is set or not
+      (+) __HAL_FMPI2C_CLEAR_FLAG : Clears the specified FMPI2C pending flag
+      (+) __HAL_FMPI2C_ENABLE_IT: Enables the specified FMPI2C interrupt
+      (+) __HAL_FMPI2C_DISABLE_IT: Disables the specified FMPI2C interrupt
+
+     [..]
+       (@) You can refer to the FMPI2C HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FMPI2C FMPI2C
+  * @brief FMPI2C HAL module driver
+  * @{
+  */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+
+#if defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FMPI2C_Private_Constants
+  * @{
+  */
+#define TIMING_CLEAR_MASK       ((uint32_t)0xF0FFFFFF)  /*<! FMPI2C TIMING clear register Mask */
+#define FMPI2C_TIMEOUT_ADDR    ((uint32_t)10000)  /* 10 s  */
+#define FMPI2C_TIMEOUT_BUSY    ((uint32_t)25)     /* 25 ms */
+#define FMPI2C_TIMEOUT_DIR     ((uint32_t)25)     /* 25 ms */
+#define FMPI2C_TIMEOUT_RXNE    ((uint32_t)25)     /* 25 ms */
+#define FMPI2C_TIMEOUT_STOPF   ((uint32_t)25)     /* 25 ms */
+#define FMPI2C_TIMEOUT_TC      ((uint32_t)25)     /* 25 ms */
+#define FMPI2C_TIMEOUT_TCR     ((uint32_t)25)     /* 25 ms */
+#define FMPI2C_TIMEOUT_TXIS    ((uint32_t)25)     /* 25 ms */
+#define FMPI2C_TIMEOUT_FLAG    ((uint32_t)25)     /* 25 ms */
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FMPI2C_Private_Functions
+  * @brief    FMPI2C private  functions
+  * @{
+  */
+static void FMPI2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma);
+static void FMPI2C_DMAError(DMA_HandleTypeDef *hdma);
+
+static HAL_StatusTypeDef FMPI2C_RequestMemoryWrite(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout);
+static HAL_StatusTypeDef FMPI2C_RequestMemoryRead(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout);
+static HAL_StatusTypeDef FMPI2C_WaitOnFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+static HAL_StatusTypeDef FMPI2C_WaitOnTXISFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout);
+static HAL_StatusTypeDef FMPI2C_WaitOnRXNEFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout);
+static HAL_StatusTypeDef FMPI2C_WaitOnSTOPFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout);
+static HAL_StatusTypeDef FMPI2C_IsAcknowledgeFailed(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout);
+
+static HAL_StatusTypeDef FMPI2C_MasterTransmit_ISR(FMPI2C_HandleTypeDef *hfmpi2c);
+static HAL_StatusTypeDef FMPI2C_MasterReceive_ISR(FMPI2C_HandleTypeDef *hfmpi2c);
+
+static HAL_StatusTypeDef FMPI2C_SlaveTransmit_ISR(FMPI2C_HandleTypeDef *hfmpi2c);
+static HAL_StatusTypeDef FMPI2C_SlaveReceive_ISR(FMPI2C_HandleTypeDef *hfmpi2c);
+
+static void FMPI2C_TransferConfig(FMPI2C_HandleTypeDef *hfmpi2c,  uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FMPI2C_Exported_Functions FMPI2C Exported Functions
+  * @{
+  */
+
+/** @defgroup FMPI2C_Exported_Functions_Group1 Initialization/de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+              ##### Initialization/de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and
+          de-initialiaze the FMPI2Cx peripheral:
+
+      (+) User must Implement HAL_FMPI2C_MspInit() function in which he configures
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+      (+) Call the function HAL_FMPI2C_Init() to configure the selected device with
+          the selected configuration:
+        (++) Clock Timing
+        (++) Own Address 1
+        (++) Addressing mode (Master, Slave)
+        (++) Dual Addressing mode
+        (++) Own Address 2
+        (++) Own Address 2 Mask
+        (++) General call mode
+        (++) Nostretch mode
+
+      (+) Call the function HAL_FMPI2C_DeInit() to restore the default configuration
+          of the selected FMPI2Cx periperal.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the FMPI2C according to the specified parameters
+  *         in the FMPI2C_InitTypeDef and create the associated handle.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* Check the FMPI2C handle allocation */
+  if(hfmpi2c == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+  assert_param(IS_FMPI2C_OWN_ADDRESS1(hfmpi2c->Init.OwnAddress1));
+  assert_param(IS_FMPI2C_ADDRESSING_MODE(hfmpi2c->Init.AddressingMode));
+  assert_param(IS_FMPI2C_DUAL_ADDRESS(hfmpi2c->Init.DualAddressMode));
+  assert_param(IS_FMPI2C_OWN_ADDRESS2(hfmpi2c->Init.OwnAddress2));
+  assert_param(IS_FMPI2C_OWN_ADDRESS2_MASK(hfmpi2c->Init.OwnAddress2Masks));
+  assert_param(IS_FMPI2C_GENERAL_CALL(hfmpi2c->Init.GeneralCallMode));
+  assert_param(IS_FMPI2C_NO_STRETCH(hfmpi2c->Init.NoStretchMode));
+
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hfmpi2c->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+    HAL_FMPI2C_MspInit(hfmpi2c);
+  }
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+  /* Disable the selected FMPI2C peripheral */
+  __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+  /*---------------------------- FMPI2Cx TIMINGR Configuration ------------------*/
+  /* Configure FMPI2Cx: Frequency range */
+  hfmpi2c->Instance->TIMINGR = hfmpi2c->Init.Timing & TIMING_CLEAR_MASK;
+
+  /*---------------------------- FMPI2Cx OAR1 Configuration ---------------------*/
+  /* Configure FMPI2Cx: Own Address1 and ack own address1 mode */
+  hfmpi2c->Instance->OAR1 &= ~FMPI2C_OAR1_OA1EN;
+  if(hfmpi2c->Init.OwnAddress1 != 0)
+  {
+    if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_7BIT)
+    {
+      hfmpi2c->Instance->OAR1 = (FMPI2C_OAR1_OA1EN | hfmpi2c->Init.OwnAddress1);
+    }
+    else /* FMPI2C_ADDRESSINGMODE_10BIT */
+    {
+      hfmpi2c->Instance->OAR1 = (FMPI2C_OAR1_OA1EN | FMPI2C_OAR1_OA1MODE | hfmpi2c->Init.OwnAddress1);
+    }
+  }
+
+  /*---------------------------- FMPI2Cx CR2 Configuration ----------------------*/
+  /* Configure FMPI2Cx: Addressing Master mode */
+  if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT)
+  {
+    hfmpi2c->Instance->CR2 = (FMPI2C_CR2_ADD10);
+  }
+  /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
+  hfmpi2c->Instance->CR2 |= (FMPI2C_CR2_AUTOEND | FMPI2C_CR2_NACK);
+
+  /*---------------------------- FMPI2Cx OAR2 Configuration ---------------------*/
+  /* Configure FMPI2Cx: Dual mode and Own Address2 */
+  hfmpi2c->Instance->OAR2 = (hfmpi2c->Init.DualAddressMode | hfmpi2c->Init.OwnAddress2 | (hfmpi2c->Init.OwnAddress2Masks << 8));
+
+  /*---------------------------- FMPI2Cx CR1 Configuration ----------------------*/
+  /* Configure FMPI2Cx: Generalcall and NoStretch mode */
+  hfmpi2c->Instance->CR1 = (hfmpi2c->Init.GeneralCallMode | hfmpi2c->Init.NoStretchMode);
+
+  /* Enable the selected FMPI2C peripheral */
+  __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+  hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+  hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the FMPI2C peripheral.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_DeInit(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* Check the FMPI2C handle allocation */
+  if(hfmpi2c == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+  /* Disable the FMPI2C Peripheral Clock */
+  __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_FMPI2C_MspDeInit(hfmpi2c);
+
+  hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+  hfmpi2c->State = HAL_FMPI2C_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hfmpi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief FMPI2C MSP Init.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval None
+  */
+ __weak void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FMPI2C_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief FMPI2C MSP DeInit
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval None
+  */
+ __weak void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FMPI2C_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FMPI2C_Exported_Functions_Group2 I/O operation functions
+ *  @brief   Data transfers functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the FMPI2C data
+    transfers.
+
+    (#) There is two mode of transfer:
+       (++) Blocking mode : The communication is performed in the polling mode.
+            The status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode : The communication is performed using Interrupts
+            or DMA. These functions return the status of the transfer startup.
+            The end of the data processing will be indicated through the
+            dedicated FMPI2C IRQ when using Interrupt mode or the DMA IRQ when
+            using DMA mode.
+
+    (#) Blocking mode functions are :
+        (++) HAL_FMPI2C_Master_Transmit()
+        (++) HAL_FMPI2C_Master_Receive()
+        (++) HAL_FMPI2C_Slave_Transmit()
+        (++) HAL_FMPI2C_Slave_Receive()
+        (++) HAL_FMPI2C_Mem_Write()
+        (++) HAL_FMPI2C_Mem_Read()
+        (++) HAL_FMPI2C_IsDeviceReady()
+
+    (#) No-Blocking mode functions with Interrupt are :
+        (++) HAL_FMPI2C_Master_Transmit_IT()
+        (++) HAL_FMPI2C_Master_Receive_IT()
+        (++) HAL_FMPI2C_Slave_Transmit_IT()
+        (++) HAL_FMPI2C_Slave_Receive_IT()
+        (++) HAL_FMPI2C_Mem_Write_IT()
+        (++) HAL_FMPI2C_Mem_Read_IT()
+
+    (#) No-Blocking mode functions with DMA are :
+        (++) HAL_FMPI2C_Master_Transmit_DMA()
+        (++) HAL_FMPI2C_Master_Receive_DMA()
+        (++) HAL_FMPI2C_Slave_Transmit_DMA()
+        (++) HAL_FMPI2C_Slave_Receive_DMA()
+        (++) HAL_FMPI2C_Mem_Write_DMA()
+        (++) HAL_FMPI2C_Mem_Read_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+        (++) HAL_FMPI2C_MemTxCpltCallback()
+        (++) HAL_FMPI2C_MemRxCpltCallback()
+        (++) HAL_FMPI2C_MasterTxCpltCallback()
+        (++) HAL_FMPI2C_MasterRxCpltCallback()
+        (++) HAL_FMPI2C_SlaveTxCpltCallback()
+        (++) HAL_FMPI2C_SlaveRxCpltCallback()
+        (++) HAL_FMPI2C_ErrorCallback()
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Transmits in master mode an amount of data in blocking mode.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t sizetmp = 0;
+
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_MASTER_BUSY_TX;
+    hfmpi2c->ErrorCode   = HAL_FMPI2C_ERROR_NONE;
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    /* Size > 255, need to set RELOAD bit */
+    if(Size > 255)
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE);
+      sizetmp = 255;
+    }
+    else
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_WRITE);
+      sizetmp = Size;
+    }
+
+    do
+    {
+      /* Wait until TXIS flag is set */
+      if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
+      {
+        if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+        {
+          return HAL_ERROR;
+        }
+        else
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+      /* Write data to TXDR */
+      hfmpi2c->Instance->TXDR = (*pData++);
+      sizetmp--;
+      Size--;
+
+      if((sizetmp == 0)&&(Size!=0))
+      {
+        /* Wait until TXE flag is set */
+        if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        if(Size > 255)
+        {
+          FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+          sizetmp = 255;
+        }
+        else
+        {
+          FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+          sizetmp = Size;
+        }
+      }
+
+    }while(Size > 0);
+
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is set */
+    if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives in master mode an amount of data in blocking mode.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t sizetmp = 0;
+
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_MASTER_BUSY_RX;
+    hfmpi2c->ErrorCode   = HAL_FMPI2C_ERROR_NONE;
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    /* Size > 255, need to set RELOAD bit */
+    if(Size > 255)
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
+      sizetmp = 255;
+    }
+    else
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
+      sizetmp = Size;
+    }
+
+    do
+    {
+      /* Wait until RXNE flag is set */
+      if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      /* Write data to RXDR */
+      (*pData++) =hfmpi2c->Instance->RXDR;
+      sizetmp--;
+      Size--;
+
+      if((sizetmp == 0)&&(Size!=0))
+      {
+        /* Wait until TCR flag is set */
+        if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        if(Size > 255)
+        {
+          FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+          sizetmp = 255;
+        }
+        else
+        {
+          FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+          sizetmp = Size;
+        }
+      }
+
+    }while(Size > 0);
+
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is set */
+    if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmits in slave mode an amount of data in blocking mode.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_SLAVE_BUSY_RX;
+    hfmpi2c->ErrorCode   = HAL_FMPI2C_ERROR_NONE;
+
+    /* Enable Address Acknowledge */
+    hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+    /* Wait until ADDR flag is set */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+
+    /* Clear ADDR flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+
+    /* If 10bit addressing mode is selected */
+    if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT)
+    {
+      /* Wait until ADDR flag is set */
+      if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
+      {
+        /* Disable Address Acknowledge */
+        hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+        return HAL_TIMEOUT;
+      }
+
+      /* Clear ADDR flag */
+      __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+    }
+
+    /* Wait until DIR flag is set Transmitter mode */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, RESET, Timeout) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+
+    do
+    {
+      /* Wait until TXIS flag is set */
+      if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
+      {
+        /* Disable Address Acknowledge */
+        hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+        if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+        {
+          return HAL_ERROR;
+        }
+        else
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+
+      /* Read data from TXDR */
+      hfmpi2c->Instance->TXDR = (*pData++);
+      Size--;
+    }while(Size > 0);
+
+    /* Wait until STOP flag is set */
+    if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+	/* Normal use case for Transmitter mode */
+	/* A NACK is generated to confirm the end of transfer */
+	hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Clear STOP flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_STOPF);
+
+    /* Wait until BUSY flag is reset */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, Timeout) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+
+    /* Disable Address Acknowledge */
+    hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in slave mode an amount of data in blocking mode
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_SLAVE_BUSY_RX;
+    hfmpi2c->ErrorCode   = HAL_FMPI2C_ERROR_NONE;
+
+    /* Enable Address Acknowledge */
+    hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+    /* Wait until ADDR flag is set */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+
+    /* Clear ADDR flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+
+    /* Wait until DIR flag is reset Receiver mode */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, SET, Timeout) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+
+    while(Size > 0)
+    {
+      /* Wait until RXNE flag is set */
+      if(FMPI2C_WaitOnRXNEFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
+      {
+        /* Disable Address Acknowledge */
+        hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+        if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_TIMEOUT)
+        {
+          return HAL_TIMEOUT;
+        }
+        else
+        {
+          return HAL_ERROR;
+        }
+      }
+
+      /* Read data from RXDR */
+      (*pData++) = hfmpi2c->Instance->RXDR;
+      Size--;
+    }
+
+    /* Wait until STOP flag is set */
+    if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Clear STOP flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_STOPF);
+
+    /* Wait until BUSY flag is reset */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, Timeout) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+
+
+    /* Disable Address Acknowledge */
+    hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in master mode an amount of data in no-blocking mode with Interrupt
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_MASTER_BUSY_TX;
+    hfmpi2c->ErrorCode   = HAL_FMPI2C_ERROR_NONE;
+
+    hfmpi2c->pBuffPtr = pData;
+    hfmpi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hfmpi2c->XferSize = 255;
+    }
+    else
+    {
+      hfmpi2c->XferSize = Size;
+    }
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE);
+    }
+    else
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_WRITE);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+              to avoid the risk of FMPI2C interrupt handle execution before current
+              process unlock */
+
+
+    /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+    /* possible to enable all of these */
+    /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+    __HAL_FMPI2C_ENABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_TXI );
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in master mode an amount of data in no-blocking mode with Interrupt
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_MASTER_BUSY_RX;
+    hfmpi2c->ErrorCode   = HAL_FMPI2C_ERROR_NONE;
+
+    hfmpi2c->pBuffPtr = pData;
+    hfmpi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hfmpi2c->XferSize = 255;
+    }
+    else
+    {
+      hfmpi2c->XferSize = Size;
+    }
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
+    }
+    else
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+              to avoid the risk of FMPI2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+    /* possible to enable all of these */
+    /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+    __HAL_FMPI2C_ENABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_RXI );
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in slave mode an amount of data in no-blocking mode with Interrupt
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
+{
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_SLAVE_BUSY_TX;
+    hfmpi2c->ErrorCode   = HAL_FMPI2C_ERROR_NONE;
+
+    /* Enable Address Acknowledge */
+    hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+    hfmpi2c->pBuffPtr = pData;
+    hfmpi2c->XferSize = Size;
+    hfmpi2c->XferCount = Size;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+              to avoid the risk of FMPI2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+    /* possible to enable all of these */
+    /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+    __HAL_FMPI2C_ENABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_TXI );
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in slave mode an amount of data in no-blocking mode with Interrupt
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
+{
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_SLAVE_BUSY_RX;
+    hfmpi2c->ErrorCode   = HAL_FMPI2C_ERROR_NONE;
+
+    /* Enable Address Acknowledge */
+    hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+    hfmpi2c->pBuffPtr = pData;
+    hfmpi2c->XferSize = Size;
+    hfmpi2c->XferCount = Size;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+              to avoid the risk of FMPI2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+    /* possible to enable all of these */
+    /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+    __HAL_FMPI2C_ENABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in master mode an amount of data in no-blocking mode with DMA
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_MASTER_BUSY_TX;
+    hfmpi2c->ErrorCode   = HAL_FMPI2C_ERROR_NONE;
+
+    hfmpi2c->pBuffPtr = pData;
+    hfmpi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hfmpi2c->XferSize = 255;
+    }
+    else
+    {
+      hfmpi2c->XferSize = Size;
+    }
+
+    /* Set the FMPI2C DMA transfer complete callback */
+    hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMAMasterTransmitCplt;
+
+    /* Set the DMA error callback */
+    hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError;
+
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE);
+    }
+    else
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_WRITE);
+    }
+
+    /* Wait until TXIS flag is set */
+    if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_TXIS) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+
+    /* Enable DMA Request */
+    hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in master mode an amount of data in no-blocking mode with DMA
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_MASTER_BUSY_RX;
+    hfmpi2c->ErrorCode   = HAL_FMPI2C_ERROR_NONE;
+
+    hfmpi2c->pBuffPtr = pData;
+    hfmpi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hfmpi2c->XferSize = 255;
+    }
+    else
+    {
+      hfmpi2c->XferSize = Size;
+    }
+
+    /* Set the FMPI2C DMA transfer complete callback */
+    hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMAMasterReceiveCplt;
+
+    /* Set the DMA error callback */
+    hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError;
+
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, hfmpi2c->XferSize);
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
+    }
+    else
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
+    }
+
+    /* Wait until RXNE flag is set */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, FMPI2C_TIMEOUT_RXNE) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+
+    /* Enable DMA Request */
+    hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in slave mode an amount of data in no-blocking mode with DMA
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
+{
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_SLAVE_BUSY_TX;
+    hfmpi2c->ErrorCode   = HAL_FMPI2C_ERROR_NONE;
+
+    hfmpi2c->pBuffPtr = pData;
+    hfmpi2c->XferCount = Size;
+    hfmpi2c->XferSize = Size;
+
+    /* Set the FMPI2C DMA transfer complete callback */
+    hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMASlaveTransmitCplt;
+
+    /* Set the DMA error callback */
+    hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError;
+
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+    /* Enable Address Acknowledge */
+    hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+    /* Wait until ADDR flag is set */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, FMPI2C_TIMEOUT_ADDR) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+
+    /* Clear ADDR flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+
+    /* If 10bits addressing mode is selected */
+    if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT)
+    {
+      /* Wait until ADDR flag is set */
+      if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, FMPI2C_TIMEOUT_ADDR) != HAL_OK)
+      {
+        /* Disable Address Acknowledge */
+        hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+        return HAL_TIMEOUT;
+      }
+
+      /* Clear ADDR flag */
+      __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+    }
+
+    /* Wait until DIR flag is set Transmitter mode */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, RESET, FMPI2C_TIMEOUT_BUSY) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+
+    /* Enable DMA Request */
+    hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in slave mode an amount of data in no-blocking mode with DMA
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
+{
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_SLAVE_BUSY_RX;
+    hfmpi2c->ErrorCode   = HAL_FMPI2C_ERROR_NONE;
+
+    hfmpi2c->pBuffPtr = pData;
+    hfmpi2c->XferSize = Size;
+    hfmpi2c->XferCount = Size;
+
+    /* Set the FMPI2C DMA transfer complete callback */
+    hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMASlaveReceiveCplt;
+
+    /* Set the DMA error callback */
+    hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError;
+
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, Size);
+
+    /* Enable Address Acknowledge */
+    hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
+
+    /* Wait until ADDR flag is set */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, FMPI2C_TIMEOUT_ADDR) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+
+    /* Clear ADDR flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
+
+    /* Wait until DIR flag is set Receiver mode */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, SET, FMPI2C_TIMEOUT_DIR) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+
+    /* Enable DMA Request */
+    hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief  Write an amount of data in blocking mode to a specific memory address
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t Sizetmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_MEM_BUSY_TX;
+    hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+    /* Send Slave Address and Memory Address */
+    if(FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Set NBYTES to write and reload if size > 255 */
+    /* Size > 255, need to set RELOAD bit */
+    if(Size > 255)
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+      Sizetmp = 255;
+    }
+    else
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+      Sizetmp = Size;
+    }
+
+    do
+    {
+      /* Wait until TXIS flag is set */
+      if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
+      {
+        if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+        {
+          return HAL_ERROR;
+        }
+        else
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+
+      /* Write data to DR */
+      hfmpi2c->Instance->TXDR = (*pData++);
+      Sizetmp--;
+      Size--;
+
+      if((Sizetmp == 0)&&(Size!=0))
+      {
+        /* Wait until TCR flag is set */
+        if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+
+        if(Size > 255)
+        {
+          FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+          Sizetmp = 255;
+        }
+        else
+        {
+          FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+          Sizetmp = Size;
+        }
+      }
+
+    }while(Size > 0);
+
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */
+    if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Read an amount of data in blocking mode from a specific memory address
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t Sizetmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_MEM_BUSY_RX;
+    hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+    /* Send Slave Address and Memory Address */
+    if(FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    /* Size > 255, need to set RELOAD bit */
+    if(Size > 255)
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
+      Sizetmp = 255;
+    }
+    else
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
+      Sizetmp = Size;
+    }
+
+    do
+    {
+      /* Wait until RXNE flag is set */
+      if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      /* Read data from RXDR */
+      (*pData++) = hfmpi2c->Instance->RXDR;
+
+      /* Decrement the Size counter */
+      Sizetmp--;
+      Size--;
+
+      if((Sizetmp == 0)&&(Size!=0))
+      {
+        /* Wait until TCR flag is set */
+        if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        if(Size > 255)
+        {
+          FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+          Sizetmp = 255;
+        }
+        else
+        {
+          FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+          Sizetmp = Size;
+        }
+      }
+
+    }while(Size > 0);
+
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */
+    if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief  Write an amount of data in no-blocking mode with Interrupt to a specific memory address
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_MEM_BUSY_TX;
+    hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+    hfmpi2c->pBuffPtr = pData;
+    hfmpi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hfmpi2c->XferSize = 255;
+    }
+    else
+    {
+      hfmpi2c->XferSize = Size;
+    }
+
+    /* Send Slave Address and Memory Address */
+    if(FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Set NBYTES to write and reload if size > 255 */
+    /* Size > 255, need to set RELOAD bit */
+    if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+    }
+    else
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+              to avoid the risk of FMPI2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+    /* possible to enable all of these */
+    /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+    __HAL_FMPI2C_ENABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_TXI );
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Read an amount of data in no-blocking mode with Interrupt from a specific memory address
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_MEM_BUSY_RX;
+
+    hfmpi2c->pBuffPtr = pData;
+    hfmpi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hfmpi2c->XferSize = 255;
+    }
+    else
+    {
+      hfmpi2c->XferSize = Size;
+    }
+
+    /* Send Slave Address and Memory Address */
+    if(FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    /* Size > 255, need to set RELOAD bit */
+    if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
+    }
+    else
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    /* Note : The FMPI2C interrupts must be enabled after unlocking current process
+              to avoid the risk of FMPI2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+    /* possible to enable all of these */
+    /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
+    __HAL_FMPI2C_ENABLE_IT(hfmpi2c, FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_RXI );
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief  Write an amount of data in no-blocking mode with DMA to a specific memory address
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_MEM_BUSY_TX;
+    hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+    hfmpi2c->pBuffPtr = pData;
+    hfmpi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hfmpi2c->XferSize = 255;
+    }
+    else
+    {
+      hfmpi2c->XferSize = Size;
+    }
+
+    /* Set the FMPI2C DMA transfer complete callback */
+    hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMAMemTransmitCplt;
+
+    /* Set the DMA error callback */
+    hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError;
+
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+    /* Send Slave Address and Memory Address */
+    if(FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 */
+    if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+    }
+    else
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+    }
+
+    /* Wait until TXIS flag is set */
+    if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_TXIS) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Enable DMA Request */
+    hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Reads an amount of data in no-blocking mode with DMA from a specific memory address.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be read
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
+
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_MEM_BUSY_RX;
+
+    hfmpi2c->pBuffPtr = pData;
+    hfmpi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hfmpi2c->XferSize = 255;
+    }
+    else
+    {
+      hfmpi2c->XferSize = Size;
+    }
+
+    /* Set the FMPI2C DMA transfer complete callback */
+    hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMAMemReceiveCplt;
+
+    /* Set the DMA error callback */
+    hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError;
+
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, hfmpi2c->XferSize);
+
+    /* Send Slave Address and Memory Address */
+    if(FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
+    }
+    else
+    {
+      FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
+    }
+
+    /* Wait until RXNE flag is set */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, FMPI2C_TIMEOUT_RXNE) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Enable DMA Request */
+    hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Checks if target device is ready for communication.
+  * @note   This function is used with Memory devices
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  Trials: Number of trials
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  __IO uint32_t FMPI2C_Trials = 0;
+
+  if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
+  {
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+    hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+
+    do
+    {
+      /* Generate Start */
+      hfmpi2c->Instance->CR2 = __HAL_FMPI2C_GENERATE_START(hfmpi2c->Init.AddressingMode,DevAddress);
+
+      /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+      /* Wait until STOPF flag is set or a NACK flag is set*/
+      tickstart = HAL_GetTick();
+      while((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET) && (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == RESET) && (hfmpi2c->State != HAL_FMPI2C_STATE_TIMEOUT))
+      {
+      	if(Timeout != HAL_MAX_DELAY)
+      	{
+          if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+          {
+            /* Device is ready */
+            hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+            /* Process Unlocked */
+            __HAL_UNLOCK(hfmpi2c);
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+
+      /* Check if the NACKF flag has not been set */
+      if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == RESET)
+      {
+        /* Wait until STOPF flag is reset */
+        if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        /* Clear STOP Flag */
+        __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+        /* Device is ready */
+        hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+
+        return HAL_OK;
+      }
+      else
+      {
+        /* Wait until STOPF flag is reset */
+        if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        /* Clear NACK Flag */
+        __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+        /* Clear STOP Flag, auto generated with autoend*/
+        __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+      }
+
+      /* Check if the maximum allowed number of trials has been reached */
+      if (FMPI2C_Trials++ == Trials)
+      {
+        /* Generate Stop */
+        hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP;
+
+        /* Wait until STOPF flag is reset */
+        if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        /* Clear STOP Flag */
+        __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+      }
+    }while(FMPI2C_Trials < Trials);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_TIMEOUT;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  This function handles FMPI2C event interrupt request.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval None
+  */
+void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* FMPI2C in mode Transmitter ---------------------------------------------------*/
+  if (((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TCR) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TC) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR) == SET)) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, (FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_TXI | FMPI2C_IT_ADDRI) [...]
+  {
+    /* Slave mode selected */
+    if (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX)
+    {
+      FMPI2C_SlaveTransmit_ISR(hfmpi2c);
+    }
+  }
+
+  if (((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TCR) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TC) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET)) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, (FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_TXI)) == SET))
+  {
+    /* Master mode selected */
+    if ((hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MEM_BUSY_TX))
+    {
+      FMPI2C_MasterTransmit_ISR(hfmpi2c);
+    }
+  }
+
+  /* FMPI2C in mode Receiver ----------------------------------------------------*/
+  if (((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TCR) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TC) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR) == SET)) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, (FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_RXI | FMPI2C_IT_ADDRI))  [...]
+  {
+    /* Slave mode selected */
+    if (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX)
+    {
+      FMPI2C_SlaveReceive_ISR(hfmpi2c);
+    }
+  }
+  if (((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TCR) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TC) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET)) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, (FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_RXI)) == SET))
+  {
+    /* Master mode selected */
+    if ((hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MEM_BUSY_RX))
+    {
+      FMPI2C_MasterReceive_ISR(hfmpi2c);
+    }
+  }
+}
+
+/**
+  * @brief  This function handles FMPI2C error interrupt request.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval None
+  */
+void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* FMPI2C Bus error interrupt occurred ------------------------------------*/
+  if((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BERR) == SET) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, FMPI2C_IT_ERRI) == SET))
+  {
+    hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_BERR;
+
+    /* Clear BERR flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_BERR);
+  }
+
+  /* FMPI2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
+  if((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_OVR) == SET) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, FMPI2C_IT_ERRI) == SET))
+  {
+    hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_OVR;
+
+    /* Clear OVR flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_OVR);
+  }
+
+  /* FMPI2C Arbitration Loss error interrupt occurred -------------------------------------*/
+  if((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_ARLO) == SET) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, FMPI2C_IT_ERRI) == SET))
+  {
+    hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_ARLO;
+
+    /* Clear ARLO flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ARLO);
+  }
+
+  /* Call the Error Callback in case of Error detected */
+  if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+  {
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    HAL_FMPI2C_ErrorCallback(hfmpi2c);
+  }
+}
+
+/**
+  * @brief  Master Tx Transfer completed callbacks.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval None
+  */
+ __weak void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FMPI2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Master Rx Transfer completed callbacks.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval None
+  */
+__weak void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FMPI2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/** @brief  Slave Tx Transfer completed callbacks.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval None
+  */
+ __weak void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FMPI2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Slave Rx Transfer completed callbacks.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval None
+  */
+__weak void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FMPI2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Memory Tx Transfer completed callbacks.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval None
+  */
+ __weak void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FMPI2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Memory Rx Transfer completed callbacks.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval None
+  */
+__weak void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FMPI2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  FMPI2C error callbacks.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval None
+  */
+ __weak void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FMPI2C_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FMPI2C_Exported_Functions_Group3 Peripheral State and Errors functions
+ *  @brief   Peripheral State and Errors functions
+ *
+ at verbatim
+ ===============================================================================
+            ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection permit to get in run-time the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the FMPI2C state.
+  * @param  hfmpi2c : FMPI2C handle
+  * @retval HAL state
+  */
+HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  return hfmpi2c->State;
+}
+
+/**
+* @brief  Return the FMPI2C error code
+* @param  hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
+  *              the configuration information for the specified FMPI2C.
+* @retval FMPI2C Error Code
+*/
+uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  return hfmpi2c->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  Handle Interrupt Flags Master Transmit Mode
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FMPI2C_MasterTransmit_ISR(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  uint16_t DevAddress;
+
+  /* Process Locked */
+  __HAL_LOCK(hfmpi2c);
+
+  if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == SET)
+  {
+    /* Write data to TXDR */
+    hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
+    hfmpi2c->XferSize--;
+    hfmpi2c->XferCount--;
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TCR) == SET)
+  {
+    if((hfmpi2c->XferSize == 0)&&(hfmpi2c->XferCount!=0))
+    {
+      DevAddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
+
+      if(hfmpi2c->XferCount > 255)
+      {
+        FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+        hfmpi2c->XferSize = 255;
+      }
+      else
+      {
+        FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferCount, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+        hfmpi2c->XferSize = hfmpi2c->XferCount;
+      }
+    }
+    else
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hfmpi2c);
+
+      /* Wrong size Status regarding TCR flag event */
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_SIZE;
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TC) == SET)
+  {
+    if(hfmpi2c->XferCount == 0)
+    {
+      /* Generate Stop */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP;
+    }
+    else
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hfmpi2c);
+
+      /* Wrong size Status regarding TCR flag event */
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_SIZE;
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET)
+  {
+    /* Disable ERR, TC, STOP, NACK, TXI interrupt */
+    __HAL_FMPI2C_DISABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_TXI );
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    if(hfmpi2c->State == HAL_FMPI2C_STATE_MEM_BUSY_TX)
+    {
+      HAL_FMPI2C_MemTxCpltCallback(hfmpi2c);
+    }
+    else
+    {
+      HAL_FMPI2C_MasterTxCpltCallback(hfmpi2c);
+    }
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET)
+  {
+    /* Clear NACK Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+    HAL_FMPI2C_ErrorCallback(hfmpi2c);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hfmpi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle Interrupt Flags Master Receive Mode
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FMPI2C_MasterReceive_ISR(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  uint16_t DevAddress;
+
+  /* Process Locked */
+  __HAL_LOCK(hfmpi2c);
+
+  if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == SET)
+  {
+    /* Read data from RXDR */
+    (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+    hfmpi2c->XferSize--;
+    hfmpi2c->XferCount--;
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TCR) == SET)
+  {
+    if((hfmpi2c->XferSize == 0)&&(hfmpi2c->XferCount!=0))
+    {
+      DevAddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
+
+      if(hfmpi2c->XferCount > 255)
+      {
+        FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+        hfmpi2c->XferSize = 255;
+      }
+      else
+      {
+        FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferCount, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+        hfmpi2c->XferSize = hfmpi2c->XferCount;
+      }
+    }
+    else
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hfmpi2c);
+
+      /* Wrong size Status regarding TCR flag event */
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_SIZE;
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TC) == SET)
+  {
+    if(hfmpi2c->XferCount == 0)
+    {
+      /* Generate Stop */
+      hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP;
+    }
+    else
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hfmpi2c);
+
+      /* Wrong size Status regarding TCR flag event */
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_SIZE;
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET)
+  {
+    /* Disable ERR, TC, STOP, NACK, TXI interrupt */
+    __HAL_FMPI2C_DISABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_RXI );
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    if(hfmpi2c->State == HAL_FMPI2C_STATE_MEM_BUSY_RX)
+    {
+      HAL_FMPI2C_MemRxCpltCallback(hfmpi2c);
+    }
+    else
+    {
+      HAL_FMPI2C_MasterRxCpltCallback(hfmpi2c);
+    }
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET)
+  {
+    /* Clear NACK Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+    HAL_FMPI2C_ErrorCallback(hfmpi2c);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hfmpi2c);
+
+  return HAL_OK;
+
+}
+
+/**
+  * @brief  Handle Interrupt Flags Slave Transmit Mode
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FMPI2C_SlaveTransmit_ISR(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* Process locked */
+  __HAL_LOCK(hfmpi2c);
+
+  if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) != RESET)
+  {
+    /* Check that FMPI2C transfer finished */
+    /* if yes, normal usecase, a NACK is sent by the MASTER when Transfer is finished */
+    /* Mean XferCount == 0*/
+    /* So clear Flag NACKF only */
+    if(hfmpi2c->XferCount == 0)
+    {
+      /* Clear NACK Flag */
+      __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hfmpi2c);
+    }
+    else
+    {
+      /* if no, error usecase, a Non-Acknowledge of last Data is generated by the MASTER*/
+      /* Clear NACK Flag */
+      __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+      /* Set ErrorCode corresponding to a Non-Acknowledge */
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hfmpi2c);
+
+      /* Call the Error callback to prevent upper layer */
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR) == SET)
+  {
+    /* Clear ADDR flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR);
+  }
+  /* Check first if STOPF is set          */
+  /* to prevent a Write Data in TX buffer */
+  /* which is stuck in TXDR until next    */
+  /* communication with Master            */
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET)
+  {
+    /* Disable ERRI, TCI, STOPI, NACKI, ADDRI, RXI, TXI interrupt */
+    __HAL_FMPI2C_DISABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI );
+
+    /* Disable Address Acknowledge */
+    hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    HAL_FMPI2C_SlaveTxCpltCallback(hfmpi2c);
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == SET)
+  {
+    /* Write data to TXDR only if XferCount not reach "0" */
+    /* A TXIS flag can be set, during STOP treatment      */
+    if(hfmpi2c->XferCount > 0)
+    {
+      /* Write data to TXDR */
+      hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
+      hfmpi2c->XferCount--;
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hfmpi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle Interrupt Flags Slave Receive Mode
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FMPI2C_SlaveReceive_ISR(FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* Process Locked */
+  __HAL_LOCK(hfmpi2c);
+
+  if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) != RESET)
+  {
+    /* Clear NACK Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+    HAL_FMPI2C_ErrorCallback(hfmpi2c);
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR) == SET)
+  {
+    /* Clear ADDR flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR);
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == SET)
+  {
+    /* Read data from RXDR */
+    (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
+    hfmpi2c->XferSize--;
+    hfmpi2c->XferCount--;
+  }
+  else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET)
+  {
+    /* Disable ERRI, TCI, STOPI, NACKI, ADDRI, RXI, TXI interrupt */
+    __HAL_FMPI2C_DISABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_RXI );
+
+    /* Disable Address Acknowledge */
+    hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    HAL_FMPI2C_SlaveRxCpltCallback(hfmpi2c);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hfmpi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Master sends target device address followed by internal memory address for write request.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FMPI2C_RequestMemoryWrite(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout)
+{
+  FMPI2C_TransferConfig(hfmpi2c,DevAddress,MemAddSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE);
+
+  /* Wait until TXIS flag is set */
+  if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
+  {
+    if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* If Memory address size is 8Bit */
+  if(MemAddSize == FMPI2C_MEMADD_SIZE_8BIT)
+  {
+    /* Send Memory Address */
+    hfmpi2c->Instance->TXDR = __HAL_FMPI2C_MEM_ADD_LSB(MemAddress);
+  }
+  /* If Memory address size is 16Bit */
+  else
+  {
+    /* Send MSB of Memory Address */
+    hfmpi2c->Instance->TXDR = __HAL_FMPI2C_MEM_ADD_MSB(MemAddress);
+
+    /* Wait until TXIS flag is set */
+    if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Send LSB of Memory Address */
+    hfmpi2c->Instance->TXDR = __HAL_FMPI2C_MEM_ADD_LSB(MemAddress);
+  }
+
+  /* Wait until TCR flag is set */
+  if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+return HAL_OK;
+}
+
+/**
+  * @brief  Master sends target device address followed by internal memory address for read request.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FMPI2C_RequestMemoryRead(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout)
+{
+  FMPI2C_TransferConfig(hfmpi2c,DevAddress,MemAddSize, FMPI2C_SOFTEND_MODE, FMPI2C_GENERATE_START_WRITE);
+
+  /* Wait until TXIS flag is set */
+  if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
+  {
+    if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* If Memory address size is 8Bit */
+  if(MemAddSize == FMPI2C_MEMADD_SIZE_8BIT)
+  {
+    /* Send Memory Address */
+    hfmpi2c->Instance->TXDR = __HAL_FMPI2C_MEM_ADD_LSB(MemAddress);
+  }
+  /* If Mememory address size is 16Bit */
+  else
+  {
+    /* Send MSB of Memory Address */
+    hfmpi2c->Instance->TXDR = __HAL_FMPI2C_MEM_ADD_MSB(MemAddress);
+
+    /* Wait until TXIS flag is set */
+    if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Send LSB of Memory Address */
+    hfmpi2c->Instance->TXDR = __HAL_FMPI2C_MEM_ADD_LSB(MemAddress);
+  }
+
+  /* Wait until TC flag is set */
+  if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TC, RESET, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  DMA FMPI2C master transmit process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void FMPI2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  uint16_t DevAddress;
+  FMPI2C_HandleTypeDef* hfmpi2c = (FMPI2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Check if last DMA request was done with RELOAD */
+  /* Set NBYTES to write and reload if size > 255 */
+  if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+  {
+    /* Wait until TCR flag is set */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, FMPI2C_TIMEOUT_TCR) != HAL_OK)
+    {
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+    }
+
+    /* Disable DMA Request */
+    hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
+
+    /* Check if Errors has been detected during transfer */
+    if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+    {
+      /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+      /* Wait until STOPF flag is reset */
+      if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+      {
+        if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+        {
+          hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+        }
+        else
+        {
+          hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+        }
+      }
+
+      /* Clear STOP Flag */
+      __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+      /* Clear Configuration Register 2 */
+      __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+      hfmpi2c->XferCount = 0;
+
+      hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+    else
+    {
+      hfmpi2c->pBuffPtr += hfmpi2c->XferSize;
+      hfmpi2c->XferCount -= hfmpi2c->XferSize;
+      if(hfmpi2c->XferCount > 255)
+      {
+        hfmpi2c->XferSize = 255;
+      }
+      else
+      {
+        hfmpi2c->XferSize = hfmpi2c->XferCount;
+      }
+
+      DevAddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)hfmpi2c->pBuffPtr, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+      /* Send Slave Address */
+      /* Set NBYTES to write and reload if size > 255 */
+      if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+      {
+        FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+      }
+      else
+      {
+        FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+      }
+
+      /* Wait until TXIS flag is set */
+      if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_TXIS) != HAL_OK)
+      {
+        /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+        /* Wait until STOPF flag is reset */
+        if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+        {
+          if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+          {
+            hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+          }
+          else
+          {
+            hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+          }
+        }
+
+        /* Clear STOP Flag */
+        __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+        /* Clear Configuration Register 2 */
+        __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+        hfmpi2c->XferCount = 0;
+
+        hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+        HAL_FMPI2C_ErrorCallback(hfmpi2c);
+      }
+      else
+      {
+        /* Enable DMA Request */
+        hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+      }
+    }
+  }
+  else
+  {
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */
+    if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+      }
+      else
+      {
+        hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+      }
+    }
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+    /* Disable DMA Request */
+    hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
+
+    hfmpi2c->XferCount = 0;
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+   /* Check if Errors has been detected during transfer */
+    if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+    {
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+    else
+    {
+      HAL_FMPI2C_MasterTxCpltCallback(hfmpi2c);
+    }
+  }
+}
+
+/**
+  * @brief  DMA FMPI2C slave transmit process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void FMPI2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  FMPI2C_HandleTypeDef* hfmpi2c = (FMPI2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Wait until STOP flag is set */
+  if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+  {
+    if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+    {
+      /* Normal Use case, a AF is generated by master */
+      /* to inform slave the end of transfer */
+      hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+    }
+    else
+    {
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+    }
+  }
+
+  /* Clear STOP flag */
+  __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_STOPF);
+
+  /* Wait until BUSY flag is reset */
+  if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY) != HAL_OK)
+  {
+    hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+  }
+
+  /* Disable DMA Request */
+  hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
+
+  hfmpi2c->XferCount = 0;
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+  /* Check if Errors has been detected during transfer */
+  if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+  {
+    HAL_FMPI2C_ErrorCallback(hfmpi2c);
+  }
+  else
+  {
+    HAL_FMPI2C_SlaveTxCpltCallback(hfmpi2c);
+  }
+}
+
+/**
+  * @brief DMA FMPI2C master receive process complete callback
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void FMPI2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  FMPI2C_HandleTypeDef* hfmpi2c = (FMPI2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  uint16_t DevAddress;
+
+  /* Check if last DMA request was done with RELOAD */
+  /* Set NBYTES to write and reload if size > 255 */
+  if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+  {
+    /* Wait until TCR flag is set */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, FMPI2C_TIMEOUT_TCR) != HAL_OK)
+    {
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+    }
+
+    /* Disable DMA Request */
+    hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
+
+    /* Check if Errors has been detected during transfer */
+    if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+    {
+      /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+      /* Wait until STOPF flag is reset */
+      if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+      {
+        if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+        {
+          hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+        }
+        else
+        {
+          hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+        }
+      }
+
+      /* Clear STOP Flag */
+      __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+      /* Clear Configuration Register 2 */
+      __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+      hfmpi2c->XferCount = 0;
+
+      hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+    else
+    {
+      hfmpi2c->pBuffPtr += hfmpi2c->XferSize;
+      hfmpi2c->XferCount -= hfmpi2c->XferSize;
+      if(hfmpi2c->XferCount > 255)
+      {
+        hfmpi2c->XferSize = 255;
+      }
+      else
+      {
+        hfmpi2c->XferSize = hfmpi2c->XferCount;
+      }
+
+      DevAddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)hfmpi2c->pBuffPtr, hfmpi2c->XferSize);
+
+      /* Send Slave Address */
+      /* Set NBYTES to write and reload if size > 255 */
+      if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+      {
+        FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+      }
+      else
+      {
+        FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+      }
+
+      /* Wait until RXNE flag is set */
+      if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, FMPI2C_TIMEOUT_RXNE) != HAL_OK)
+      {
+        hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+      }
+
+      /* Check if Errors has been detected during transfer */
+      if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+      {
+        /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+        /* Wait until STOPF flag is reset */
+        if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+        {
+          if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+          {
+            hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+          }
+          else
+          {
+            hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+          }
+        }
+
+        /* Clear STOP Flag */
+        __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+        /* Clear Configuration Register 2 */
+        __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+        hfmpi2c->XferCount = 0;
+
+        hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+        HAL_FMPI2C_ErrorCallback(hfmpi2c);
+      }
+      else
+      {
+        /* Enable DMA Request */
+        hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+      }
+    }
+  }
+  else
+  {
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */
+    if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+      }
+      else
+      {
+        hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+      }
+    }
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+    /* Disable DMA Request */
+    hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
+
+    hfmpi2c->XferCount = 0;
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Check if Errors has been detected during transfer */
+    if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+    {
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+    else
+    {
+      HAL_FMPI2C_MasterRxCpltCallback(hfmpi2c);
+    }
+  }
+}
+
+/**
+  * @brief  DMA FMPI2C slave receive process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void FMPI2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  FMPI2C_HandleTypeDef* hfmpi2c = (FMPI2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Wait until STOPF flag is reset */
+  if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+  {
+    if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+    {
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+    }
+    else
+    {
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+    }
+  }
+
+  /* Clear STOPF flag */
+  __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+  /* Wait until BUSY flag is reset */
+  if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY) != HAL_OK)
+  {
+    hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+  }
+
+  /* Disable DMA Request */
+  hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
+
+  /* Disable Address Acknowledge */
+  hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+  hfmpi2c->XferCount = 0;
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+  /* Check if Errors has been detected during transfer */
+  if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+  {
+    HAL_FMPI2C_ErrorCallback(hfmpi2c);
+  }
+  else
+  {
+    HAL_FMPI2C_SlaveRxCpltCallback(hfmpi2c);
+  }
+}
+
+/**
+  * @brief DMA FMPI2C Memory Write process complete callback
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void FMPI2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  uint16_t DevAddress;
+  FMPI2C_HandleTypeDef* hfmpi2c = ( FMPI2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Check if last DMA request was done with RELOAD */
+  /* Set NBYTES to write and reload if size > 255 */
+  if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+  {
+    /* Wait until TCR flag is set */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, FMPI2C_TIMEOUT_TCR) != HAL_OK)
+    {
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+    }
+
+    /* Disable DMA Request */
+    hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
+
+    /* Check if Errors has been detected during transfer */
+    if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+    {
+      /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+      /* Wait until STOPF flag is reset */
+      if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+      {
+        if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+        {
+          hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+        }
+        else
+        {
+          hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+        }
+      }
+
+      /* Clear STOP Flag */
+      __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+      /* Clear Configuration Register 2 */
+      __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+      hfmpi2c->XferCount = 0;
+
+      hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+    else
+    {
+      hfmpi2c->pBuffPtr += hfmpi2c->XferSize;
+      hfmpi2c->XferCount -= hfmpi2c->XferSize;
+      if(hfmpi2c->XferCount > 255)
+      {
+        hfmpi2c->XferSize = 255;
+      }
+      else
+      {
+        hfmpi2c->XferSize = hfmpi2c->XferCount;
+      }
+
+      DevAddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)hfmpi2c->pBuffPtr, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
+
+      /* Send Slave Address */
+      /* Set NBYTES to write and reload if size > 255 */
+      if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+      {
+        FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+      }
+      else
+      {
+        FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+      }
+
+      /* Wait until TXIS flag is set */
+      if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_TXIS) != HAL_OK)
+      {
+        /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+        /* Wait until STOPF flag is reset */
+        if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+        {
+          if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+          {
+            hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+          }
+          else
+          {
+            hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+          }
+        }
+
+        /* Clear STOP Flag */
+        __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+        /* Clear Configuration Register 2 */
+        __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+        hfmpi2c->XferCount = 0;
+
+        hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+        HAL_FMPI2C_ErrorCallback(hfmpi2c);
+      }
+      else
+      {
+        /* Enable DMA Request */
+        hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
+      }
+    }
+  }
+  else
+  {
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */
+    if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+      }
+      else
+      {
+        hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+      }
+    }
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+    /* Disable DMA Request */
+    hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
+
+    hfmpi2c->XferCount = 0;
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Check if Errors has been detected during transfer */
+    if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+    {
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+    else
+    {
+      HAL_FMPI2C_MemTxCpltCallback(hfmpi2c);
+    }
+  }
+}
+
+/**
+  * @brief  DMA FMPI2C Memory Read process complete callback
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void FMPI2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  FMPI2C_HandleTypeDef* hfmpi2c = ( FMPI2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  uint16_t DevAddress;
+
+  /* Check if last DMA request was done with RELOAD */
+  /* Set NBYTES to write and reload if size > 255 */
+  if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+  {
+    /* Wait until TCR flag is set */
+    if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, FMPI2C_TIMEOUT_TCR) != HAL_OK)
+    {
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+    }
+
+    /* Disable DMA Request */
+    hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
+
+    /* Check if Errors has been detected during transfer */
+    if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+    {
+      /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+      /* Wait until STOPF flag is reset */
+      if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+      {
+        if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+        {
+          hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+        }
+        else
+        {
+          hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+        }
+      }
+
+      /* Clear STOP Flag */
+      __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+      /* Clear Configuration Register 2 */
+      __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+      hfmpi2c->XferCount = 0;
+
+      hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+    else
+    {
+      hfmpi2c->pBuffPtr += hfmpi2c->XferSize;
+      hfmpi2c->XferCount -= hfmpi2c->XferSize;
+      if(hfmpi2c->XferCount > 255)
+      {
+        hfmpi2c->XferSize = 255;
+      }
+      else
+      {
+        hfmpi2c->XferSize = hfmpi2c->XferCount;
+      }
+
+      DevAddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)hfmpi2c->pBuffPtr, hfmpi2c->XferSize);
+
+      /* Send Slave Address */
+      /* Set NBYTES to write and reload if size > 255 */
+      if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
+      {
+        FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
+      }
+      else
+      {
+        FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
+      }
+
+      /* Wait until RXNE flag is set */
+      if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, FMPI2C_TIMEOUT_RXNE) != HAL_OK)
+      {
+        hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+      }
+
+      /* Check if Errors has been detected during transfer */
+      if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+      {
+        /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+        /* Wait until STOPF flag is reset */
+        if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+        {
+          if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+          {
+            hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+          }
+          else
+          {
+            hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+          }
+        }
+
+        /* Clear STOP Flag */
+        __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+        /* Clear Configuration Register 2 */
+        __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+        hfmpi2c->XferCount = 0;
+
+        hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+        HAL_FMPI2C_ErrorCallback(hfmpi2c);
+      }
+      else
+      {
+        /* Enable DMA Request */
+        hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
+      }
+    }
+  }
+  else
+  {
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */
+    if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
+      {
+        hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
+      }
+      else
+      {
+        hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+      }
+    }
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+    /* Disable DMA Request */
+    hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
+
+    hfmpi2c->XferCount = 0;
+
+    hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+    /* Check if Errors has been detected during transfer */
+    if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
+    {
+      HAL_FMPI2C_ErrorCallback(hfmpi2c);
+    }
+    else
+    {
+      HAL_FMPI2C_MemRxCpltCallback(hfmpi2c);
+    }
+  }
+}
+
+/**
+  * @brief  DMA FMPI2C communication error callback.
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void FMPI2C_DMAError(DMA_HandleTypeDef *hdma)
+{
+  FMPI2C_HandleTypeDef* hfmpi2c = ( FMPI2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Disable Acknowledge */
+  hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
+
+  hfmpi2c->XferCount = 0;
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+  hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA;
+
+  HAL_FMPI2C_ErrorCallback(hfmpi2c);
+}
+
+/**
+  * @brief  This function handles FMPI2C Communication Timeout.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  Flag: specifies the FMPI2C flag to check.
+  * @param  Status: The new Flag status (SET or RESET).
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FMPI2C_WaitOnFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+  uint32_t tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+          /* Process Unlocked */
+          __HAL_UNLOCK(hfmpi2c);
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+          /* Process Unlocked */
+          __HAL_UNLOCK(hfmpi2c);
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles FMPI2C Communication Timeout for specific usage of TXIS flag.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FMPI2C_WaitOnTXISFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout)
+{
+  uint32_t tickstart = HAL_GetTick();
+
+  while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == RESET)
+  {
+    /* Check if a NACK is detected */
+    if(FMPI2C_IsAcknowledgeFailed(hfmpi2c, Timeout) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+        hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hfmpi2c);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles FMPI2C Communication Timeout for specific usage of STOP flag.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FMPI2C_WaitOnSTOPFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout)
+{
+  uint32_t tickstart = 0x00;
+  tickstart = HAL_GetTick();
+
+  while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET)
+  {
+    /* Check if a NACK is detected */
+    if(FMPI2C_IsAcknowledgeFailed(hfmpi2c, Timeout) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+
+    /* Check for the Timeout */
+    if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+    {
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+      hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hfmpi2c);
+
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles FMPI2C Communication Timeout for specific usage of RXNE flag.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FMPI2C_WaitOnRXNEFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout)
+{
+  uint32_t tickstart = 0x00;
+  tickstart = HAL_GetTick();
+
+  while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == RESET)
+  {
+    /* Check if a STOPF is detected */
+    if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET)
+    {
+      /* Clear STOP Flag */
+      __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+      /* Clear Configuration Register 2 */
+      __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+      hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
+      hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hfmpi2c);
+
+      return HAL_ERROR;
+    }
+
+    /* Check for the Timeout */
+    if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+    {
+      hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
+      hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hfmpi2c);
+
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles Acknowledge failed detection during an FMPI2C Communication.
+  * @param  hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2C.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef FMPI2C_IsAcknowledgeFailed(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout)
+{
+  uint32_t tickstart = 0x00;
+  tickstart = HAL_GetTick();
+
+  if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET)
+  {
+    /* Generate stop if necessary only in case of FMPI2C peripheral in MASTER mode */
+    if((hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MEM_BUSY_TX)
+       || (hfmpi2c->State == HAL_FMPI2C_STATE_MEM_BUSY_RX))
+    {
+      /* No need to generate the STOP condition if AUTOEND mode is enabled */
+      /* Generate the STOP condition only in case of SOFTEND mode is enabled */
+      if((hfmpi2c->Instance->CR2 & FMPI2C_AUTOEND_MODE) != FMPI2C_AUTOEND_MODE)
+      {
+        /* Generate Stop */
+        hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP;
+      }
+    }
+
+    /* Wait until STOP Flag is reset */
+    /* AutoEnd should be initiate after AF */
+    while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+          /* Process Unlocked */
+          __HAL_UNLOCK(hfmpi2c);
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Clear NACKF Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
+
+    /* Clear STOP Flag */
+    __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
+
+    /* Clear Configuration Register 2 */
+    __HAL_FMPI2C_RESET_CR2(hfmpi2c);
+
+    hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_AF;
+    hfmpi2c->State= HAL_FMPI2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hfmpi2c);
+
+    return HAL_ERROR;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles FMPI2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
+  * @param  hfmpi2c: FMPI2C handle.
+  * @param  DevAddress: specifies the slave address to be programmed.
+  * @param  Size: specifies the number of bytes to be programmed.
+  *   This parameter must be a value between 0 and 255.
+  * @param  Mode: new state of the FMPI2C START condition generation.
+  *   This parameter can be one of the following values:
+  *     @arg FMPI2C_RELOAD_MODE: Enable Reload mode .
+  *     @arg FMPI2C_AUTOEND_MODE: Enable Automatic end mode.
+  *     @arg FMPI2C_SOFTEND_MODE: Enable Software end mode.
+  * @param  Request: new state of the FMPI2C START condition generation.
+  *   This parameter can be one of the following values:
+  *     @arg FMPI2C_NO_STARTSTOP: Don't Generate stop and start condition.
+  *     @arg FMPI2C_GENERATE_STOP: Generate stop condition (Size should be set to 0).
+  *     @arg FMPI2C_GENERATE_START_READ: Generate Restart for read request.
+  *     @arg FMPI2C_GENERATE_START_WRITE: Generate Restart for write request.
+  * @retval None
+  */
+static void FMPI2C_TransferConfig(FMPI2C_HandleTypeDef *hfmpi2c,  uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+  assert_param(IS_TRANSFER_MODE(Mode));
+  assert_param(IS_TRANSFER_REQUEST(Request));
+
+  /* Get the CR2 register value */
+  tmpreg = hfmpi2c->Instance->CR2;
+
+  /* clear tmpreg specific bits */
+  tmpreg &= (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_AUTOEND | FMPI2C_CR2_RD_WRN | FMPI2C_CR2_START | FMPI2C_CR2_STOP));
+
+  /* update tmpreg */
+  tmpreg |= (uint32_t)(((uint32_t)DevAddress & FMPI2C_CR2_SADD) | (((uint32_t)Size << 16 ) & FMPI2C_CR2_NBYTES) | \
+            (uint32_t)Mode | (uint32_t)Request);
+
+  /* update CR2 register */
+  hfmpi2c->Instance->CR2 = tmpreg;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F446xx */
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c
new file mode 100644
index 0000000..705b115
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c
@@ -0,0 +1,326 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_fmpi2c_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Extended FMPI2C HAL module driver.
+  *
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Inter Integrated Circuit (FMPI2C) peripheral:
+  *           + Extended Control methods
+  *
+  @verbatim
+  ==============================================================================
+               ##### FMPI2C peripheral extended features  #####
+  ==============================================================================
+
+  [..] Comparing to other previous devices, the FMPI2C interface for STM32L4XX
+       devices contains the following additional features
+
+       (+) Possibility to disable or enable Analog Noise Filter
+       (+) Use of a configured Digital Noise Filter
+       (+) Disable or enable wakeup from Stop mode
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..] This driver provides functions to configure Noise Filter
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FMPI2CEx FMPI2CEx
+  * @brief FMPI2C HAL module driver
+  * @{
+  */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+
+#if defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup FMPI2CEx_Exported_Functions FMPI2C Extended Exported Functions
+  * @{
+  */
+
+
+/** @defgroup FMPI2CEx_Exported_Functions_Group1 Peripheral Control methods
+ *  @brief   management functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Extension features functions #####
+ ===============================================================================
+    [..] This section provides functions allowing to:
+      (+) Configure Noise Filters
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configures FMPI2C Analog noise filter.
+  * @param  hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2Cx peripheral.
+  * @param  AnalogFilter : new state of the Analog filter.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2CEx_AnalogFilter_Config(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t AnalogFilter)
+{
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+  assert_param(IS_FMPI2C_ANALOG_FILTER(AnalogFilter));
+
+  if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
+     || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
+  {
+    return HAL_BUSY;
+  }
+
+  /* Process Locked */
+  __HAL_LOCK(hfmpi2c);
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+  /* Disable the selected FMPI2C peripheral */
+  __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+  /* Reset FMPI2Cx ANOFF bit */
+  hfmpi2c->Instance->CR1 &= ~(FMPI2C_CR1_ANFOFF);
+
+  /* Set analog filter bit*/
+  hfmpi2c->Instance->CR1 |= AnalogFilter;
+
+  __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hfmpi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures FMPI2C Digital noise filter.
+  * @param  hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2Cx peripheral.
+  * @param  DigitalFilter : Coefficient of digital noise filter between 0x00 and 0x0F.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2CEx_DigitalFilter_Config(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t DigitalFilter)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+  assert_param(IS_FMPI2C_DIGITAL_FILTER(DigitalFilter));
+
+  if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
+     || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
+  {
+    return HAL_BUSY;
+  }
+
+  /* Process Locked */
+  __HAL_LOCK(hfmpi2c);
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+  /* Disable the selected FMPI2C peripheral */
+  __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+  /* Get the old register value */
+  tmpreg = hfmpi2c->Instance->CR1;
+
+  /* Reset FMPI2Cx DNF bits [11:8] */
+  tmpreg &= ~(FMPI2C_CR1_DFN);
+
+  /* Set FMPI2Cx DNF coefficient */
+  tmpreg |= DigitalFilter << 8;
+
+  /* Store the new register value */
+  hfmpi2c->Instance->CR1 = tmpreg;
+
+  __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hfmpi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables FMPI2C wakeup from stop mode.
+  * @param  hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2Cx peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2CEx_EnableWakeUp (FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+
+  if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
+     || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
+  {
+    return HAL_BUSY;
+  }
+
+  /* Process Locked */
+  __HAL_LOCK(hfmpi2c);
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+  /* Disable the selected FMPI2C peripheral */
+  __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+  /* Enable wakeup from stop mode */
+  hfmpi2c->Instance->CR1 |= FMPI2C_CR1_WUPEN;
+
+  __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hfmpi2c);
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Disables FMPI2C wakeup from stop mode.
+  * @param  hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified FMPI2Cx peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_FMPI2CEx_DisableWakeUp (FMPI2C_HandleTypeDef *hfmpi2c)
+{
+  /* Check the parameters */
+  assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+
+  if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
+     || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
+  {
+    return HAL_BUSY;
+  }
+
+  /* Process Locked */
+  __HAL_LOCK(hfmpi2c);
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+  /* Disable the selected FMPI2C peripheral */
+  __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+  /* Enable wakeup from stop mode */
+  hfmpi2c->Instance->CR1 &= ~(FMPI2C_CR1_WUPEN);
+
+  __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+  hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hfmpi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Enable the FMPI2C1 fast mode plus driving capability.
+  * @param ConfigFastModePlus: selects the pin.
+  *   This parameter can be one of the @ref FMPI2CEx_FastModePlus values
+  * @retval None
+  */
+void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+  /* Check the parameter */
+  assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus));
+
+  /* Enable SYSCFG clock */
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+  /* Enable fast mode plus driving capability for selected pin */
+  SET_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+  * @brief Disable the FMPI2C1 fast mode plus driving capability.
+  * @param ConfigFastModePlus: selects the pin.
+  *   This parameter can be one of the @ref FMPI2CEx_FastModePlus values
+  * @retval None
+  */
+void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+  /* Check the parameter */
+  assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus));
+
+  /* Enable SYSCFG clock */
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+  /* Disable fast mode plus driving capability for selected pin */
+  CLEAR_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F446xx */
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c
new file mode 100644
index 0000000..d7d6899
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c
@@ -0,0 +1,545 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_gpio.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   GPIO HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the General Purpose Input/Output (GPIO) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### GPIO Peripheral features #####
+  ==============================================================================
+  [..]
+  Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
+  port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software
+  in several modes:
+  (+) Input mode
+  (+) Analog mode
+  (+) Output mode
+  (+) Alternate function mode
+  (+) External interrupt/event lines
+
+  [..]
+  During and just after reset, the alternate functions and external interrupt
+  lines are not active and the I/O ports are configured in input floating mode.
+
+  [..]
+  All GPIO pins have weak internal pull-up and pull-down resistors, which can be
+  activated or not.
+
+  [..]
+  In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+  type and the IO speed can be selected depending on the VDD value.
+
+  [..]
+  All ports have external interrupt/event capability. To use external interrupt
+  lines, the port must be configured in input mode. All available GPIO pins are
+  connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+
+  [..]
+  The external interrupt/event controller consists of up to 23 edge detectors
+  (16 lines are connected to GPIO) for generating event/interrupt requests (each
+  input line can be independently configured to select the type (interrupt or event)
+  and the corresponding trigger event (rising or falling or both). Each line can
+  also be masked independently.
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
+
+    (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+        (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+        (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
+             structure.
+        (++) In case of Output or alternate function mode selection: the speed is
+             configured through "Speed" member from GPIO_InitTypeDef structure.
+        (++) In alternate mode is selection, the alternate function connected to the IO
+             is configured through "Alternate" member from GPIO_InitTypeDef structure.
+        (++) Analog mode is required when a pin is to be used as ADC channel
+             or DAC output.
+        (++) In case of external interrupt/event selection the "Mode" member from
+             GPIO_InitTypeDef structure select the type (interrupt or event) and
+             the corresponding trigger event (rising or falling or both).
+
+    (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
+        mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+        HAL_NVIC_EnableIRQ().
+
+    (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+
+    (#) To set/reset the level of a pin configured in output mode use
+        HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+
+    (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+
+
+    (#) During and just after reset, the alternate functions are not
+        active and the GPIO pins are configured in input floating mode (except JTAG
+        pins).
+
+    (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
+        (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
+        priority over the GPIO function.
+
+    (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
+        general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
+        The HSE has priority over the GPIO function.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup GPIO GPIO
+  * @brief GPIO HAL module driver
+  * @{
+  */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Constants GPIO Private Constants
+  * @{
+  */
+#define GPIO_MODE             ((uint32_t)0x00000003)
+#define EXTI_MODE             ((uint32_t)0x10000000)
+#define GPIO_MODE_IT          ((uint32_t)0x00010000)
+#define GPIO_MODE_EVT         ((uint32_t)0x00020000)
+#define RISING_EDGE           ((uint32_t)0x00100000)
+#define FALLING_EDGE          ((uint32_t)0x00200000)
+#define GPIO_OUTPUT_TYPE      ((uint32_t)0x00000010)
+
+#define GPIO_NUMBER           ((uint32_t)16)
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+  * @{
+  */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+  [..]
+    This section provides functions allowing to initialize and de-initialize the GPIOs
+    to be ready for use.
+
+ at endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+  * @param  GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+  *                      x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+  * @param  GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains
+  *         the configuration information for the specified GPIO peripheral.
+  * @retval None
+  */
+void HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{
+  uint32_t position;
+  uint32_t ioposition = 0x00;
+  uint32_t iocurrent = 0x00;
+  uint32_t temp = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+  assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+  assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+  /* Configure the port pins */
+  for(position = 0; position < GPIO_NUMBER; position++)
+  {
+    /* Get the IO position */
+    ioposition = ((uint32_t)0x01) << position;
+    /* Get the current IO position */
+    iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition;
+
+    if(iocurrent == ioposition)
+    {
+      /*--------------------- GPIO Mode Configuration ------------------------*/
+      /* In case of Alternate function mode selection */
+      if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+      {
+        /* Check the Alternate function parameter */
+        assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+        /* Configure Alternate function mapped with the current IO */
+        temp = GPIOx->AFR[position >> 3];
+        temp &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
+        temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07) * 4));
+        GPIOx->AFR[position >> 3] = temp;
+      }
+
+      /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+      temp = GPIOx->MODER;
+      temp &= ~(GPIO_MODER_MODER0 << (position * 2));
+      temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2));
+      GPIOx->MODER = temp;
+
+      /* In case of Output or Alternate function mode selection */
+      if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+         (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+      {
+        /* Check the Speed parameter */
+        assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+        /* Configure the IO Speed */
+        temp = GPIOx->OSPEEDR;
+        temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
+        temp |= (GPIO_Init->Speed << (position * 2));
+        GPIOx->OSPEEDR = temp;
+
+        /* Configure the IO Output Type */
+        temp = GPIOx->OTYPER;
+        temp &= ~(GPIO_OTYPER_OT_0 << position) ;
+        temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4) << position);
+        GPIOx->OTYPER = temp;
+      }
+
+      /* Activate the Pull-up or Pull down resistor for the current IO */
+      temp = GPIOx->PUPDR;
+      temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
+      temp |= ((GPIO_Init->Pull) << (position * 2));
+      GPIOx->PUPDR = temp;
+
+      /*--------------------- EXTI Mode Configuration ------------------------*/
+      /* Configure the External Interrupt or event for the current IO */
+      if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+      {
+        /* Enable SYSCFG Clock */
+        __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+        temp = SYSCFG->EXTICR[position >> 2];
+        temp &= ~(((uint32_t)0x0F) << (4 * (position & 0x03)));
+        temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03)));
+        SYSCFG->EXTICR[position >> 2] = temp;
+
+        /* Clear EXTI line configuration */
+        temp = EXTI->IMR;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->IMR = temp;
+
+        temp = EXTI->EMR;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->EMR = temp;
+
+        /* Clear Rising Falling edge configuration */
+        temp = EXTI->RTSR;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->RTSR = temp;
+
+        temp = EXTI->FTSR;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->FTSR = temp;
+      }
+    }
+  }
+}
+
+/**
+  * @brief  De-initializes the GPIOx peripheral registers to their default reset values.
+  * @param  GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+  *                      x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+  * @param  GPIO_Pin: specifies the port bit to be written.
+  *          This parameter can be one of GPIO_PIN_x where x can be (0..15).
+  * @retval None
+  */
+void HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin)
+{
+  uint32_t position;
+  uint32_t ioposition = 0x00;
+  uint32_t iocurrent = 0x00;
+  uint32_t tmp = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+
+  /* Configure the port pins */
+  for(position = 0; position < GPIO_NUMBER; position++)
+  {
+    /* Get the IO position */
+    ioposition = ((uint32_t)0x01) << position;
+    /* Get the current IO position */
+    iocurrent = (GPIO_Pin) & ioposition;
+
+    if(iocurrent == ioposition)
+    {
+      /*------------------------- GPIO Mode Configuration --------------------*/
+      /* Configure IO Direction in Input Floating Mode */
+      GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2));
+
+      /* Configure the default Alternate Function in current IO */
+      GPIOx->AFR[position >> 3] &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
+
+      /* Configure the default value for IO Speed */
+      GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
+
+      /* Configure the default value IO Output Type */
+      GPIOx->OTYPER  &= ~(GPIO_OTYPER_OT_0 << position) ;
+
+      /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+      GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
+
+      /*------------------------- EXTI Mode Configuration --------------------*/
+      tmp = SYSCFG->EXTICR[position >> 2];
+      tmp &= (((uint32_t)0x0F) << (4 * (position & 0x03)));
+      if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03))))
+      {
+        /* Configure the External Interrupt or event for the current IO */
+        tmp = ((uint32_t)0x0F) << (4 * (position & 0x03));
+        SYSCFG->EXTICR[position >> 2] &= ~tmp;
+
+        /* Clear EXTI line configuration */
+        EXTI->IMR &= ~((uint32_t)iocurrent);
+        EXTI->EMR &= ~((uint32_t)iocurrent);
+
+        /* Clear Rising Falling edge configuration */
+        EXTI->RTSR &= ~((uint32_t)iocurrent);
+        EXTI->FTSR &= ~((uint32_t)iocurrent);
+      }
+    }
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
+ *  @brief   GPIO Read and Write
+ *
+ at verbatim
+ ===============================================================================
+                       ##### IO operation functions #####
+ ===============================================================================
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Reads the specified input port pin.
+  * @param  GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+  *                      x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+  * @param  GPIO_Pin: specifies the port bit to read.
+  *         This parameter can be GPIO_PIN_x where x can be (0..15).
+  * @retval The input port pin value.
+  */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  GPIO_PinState bitstatus;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
+  {
+    bitstatus = GPIO_PIN_SET;
+  }
+  else
+  {
+    bitstatus = GPIO_PIN_RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Sets or clears the selected data port bit.
+  *
+  * @note   This function uses GPIOx_BSRR register to allow atomic read/modify
+  *         accesses. In this way, there is no risk of an IRQ occurring between
+  *         the read and the modify access.
+  *
+  * @param  GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+  *                      x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+  * @param  GPIO_Pin: specifies the port bit to be written.
+  *          This parameter can be one of GPIO_PIN_x where x can be (0..15).
+  * @param  PinState: specifies the value to be written to the selected bit.
+  *          This parameter can be one of the GPIO_PinState enum values:
+  *            @arg GPIO_PIN_RESET: to clear the port pin
+  *            @arg GPIO_PIN_SET: to set the port pin
+  * @retval None
+  */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+  assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+  if(PinState != GPIO_PIN_RESET)
+  {
+    GPIOx->BSRR = GPIO_Pin;
+  }
+  else
+  {
+    GPIOx->BSRR = (uint32_t)GPIO_Pin << 16;
+  }
+}
+
+/**
+  * @brief  Toggles the specified GPIO pins.
+  * @param  GPIOx: Where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+  *                      x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+  * @param  GPIO_Pin: Specifies the pins to be toggled.
+  * @retval None
+  */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  GPIOx->ODR ^= GPIO_Pin;
+}
+
+/**
+  * @brief  Locks GPIO Pins configuration registers.
+  * @note   The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+  *         GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+  * @note   The configuration of the locked GPIO pins can no longer be modified
+  *         until the next reset.
+  * @param  GPIOx: where x can be (A..F) to select the GPIO peripheral for STM32F4 family
+  * @param  GPIO_Pin: specifies the port bit to be locked.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  /* Apply lock key write sequence */
+  tmp |= GPIO_Pin;
+  /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+  GPIOx->LCKR = tmp;
+  /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
+  GPIOx->LCKR = GPIO_Pin;
+  /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+  GPIOx->LCKR = tmp;
+  /* Read LCKK bit*/
+  tmp = GPIOx->LCKR;
+
+ if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
+  {
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  This function handles EXTI interrupt request.
+  * @param  GPIO_Pin: Specifies the pins connected EXTI line
+  * @retval None
+  */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+  /* EXTI line interrupt detected */
+  if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
+  {
+    __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
+    HAL_GPIO_EXTI_Callback(GPIO_Pin);
+  }
+}
+
+/**
+  * @brief  EXTI line detection callbacks.
+  * @param  GPIO_Pin: Specifies the pins connected EXTI line
+  * @retval None
+  */
+__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_GPIO_EXTI_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c
new file mode 100644
index 0000000..fa1ca7b
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c
@@ -0,0 +1,1862 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_hash.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   HASH HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the HASH peripheral:
+  *           + Initialization and de-initialization functions
+  *           + HASH/HMAC Processing functions by algorithm using polling mode
+  *           + HASH/HMAC functions by algorithm using interrupt mode
+  *           + HASH/HMAC functions by algorithm using DMA mode
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The HASH HAL driver can be used as follows:
+    (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit():
+        (##) Enable the HASH interface clock using __HAL_RCC_HASH_CLK_ENABLE()
+        (##) In case of using processing APIs based on interrupts (e.g. HAL_HMAC_SHA1_Start_IT())
+            (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority()
+            (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ()
+            (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler()
+        (##) In case of using DMA to control data transfer (e.g. HAL_HMAC_SHA1_Start_DMA())
+            (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+            (+++) Configure and enable one DMA stream one for managing data transfer from
+                memory to peripheral (input stream). Managing data transfer from
+                peripheral to memory can be performed only using CPU
+            (+++) Associate the initialized DMA handle to the HASH DMA handle
+                using  __HAL_LINKDMA()
+            (+++) Configure the priority and enable the NVIC for the transfer complete
+                interrupt on the DMA Stream using HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+    (#)Initialize the HASH HAL using HAL_HASH_Init(). This function configures mainly:
+        (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit.
+        (##) For HMAC, the encryption key.
+        (##) For HMAC, the key size used for encryption.
+    (#)Three processing functions are available:
+        (##) Polling mode: processing APIs are blocking functions
+             i.e. they process the data and wait till the digest computation is finished
+             e.g. HAL_HASH_SHA1_Start()
+        (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+                i.e. they process the data under interrupt
+                e.g. HAL_HASH_SHA1_Start_IT()
+        (##) DMA mode: processing APIs are not blocking functions and the CPU is
+             not used for data transfer i.e. the data transfer is ensured by DMA
+                e.g. HAL_HASH_SHA1_Start_DMA()
+    (#)When the processing function is called at first time after HAL_HASH_Init()
+       the HASH peripheral is initialized and processes the buffer in input.
+       After that, the digest computation is started.
+       When processing multi-buffer use the accumulate function to write the
+       data in the peripheral without starting the digest computation. In last
+       buffer use the start function to input the last buffer ans start the digest
+       computation.
+       (##) e.g. HAL_HASH_SHA1_Accumulate() : write 1st data buffer in the peripheral without starting the digest computation
+       (##) write (n-1)th data buffer in the peripheral without starting the digest computation
+       (##) HAL_HASH_SHA1_Start() : write (n)th data buffer in the peripheral and start the digest computation
+    (#)In HMAC mode, there is no Accumulate API. Only Start API is available.
+    (#)In case of using DMA, call the DMA start processing e.g. HAL_HASH_SHA1_Start_DMA().
+       After that, call the finish function in order to get the digest value
+       e.g. HAL_HASH_SHA1_Finish()
+    (#)Call HAL_HASH_DeInit() to deinitialize the HASH peripheral.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HASH HASH
+  * @brief HASH HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup HASH_Private_Functions HASH Private Functions
+  * @{
+  */
+static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void HASH_DMAError(DMA_HandleTypeDef *hdma);
+static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size);
+static void HASH_WriteData(uint8_t *pInBuffer, uint32_t Size);
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup HASH_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  DMA HASH Input Data complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+  HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  uint32_t inputaddr = 0;
+  uint32_t buffersize = 0;
+
+  if((HASH->CR & HASH_CR_MODE) != HASH_CR_MODE)
+  {
+    /* Disable the DMA transfer */
+    HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+    /* Change HASH peripheral state */
+    hhash->State = HAL_HASH_STATE_READY;
+
+    /* Call Input data transfer complete callback */
+    HAL_HASH_InCpltCallback(hhash);
+  }
+  else
+  {
+    /* Increment Interrupt counter */
+    hhash->HashInCount++;
+    /* Disable the DMA transfer before starting the next transfer */
+    HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+    if(hhash->HashInCount <= 2)
+    {
+      /* In case HashInCount = 1, set the DMA to transfer data to HASH DIN register */
+      if(hhash->HashInCount == 1)
+      {
+        inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+        buffersize = hhash->HashBuffSize;
+      }
+      /* In case HashInCount = 2, set the DMA to transfer key to HASH DIN register */
+      else if(hhash->HashInCount == 2)
+      {
+        inputaddr = (uint32_t)hhash->Init.pKey;
+        buffersize = hhash->Init.KeySize;
+      }
+      /* Configure the number of valid bits in last word of the message */
+      MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8 * (buffersize % 4));
+
+      /* Set the HASH DMA transfer complete */
+      hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+
+      /* Enable the DMA In DMA Stream */
+      HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (buffersize%4 ? (buffersize+3)/4:buffersize/4));
+
+      /* Enable DMA requests */
+      HASH->CR |= (HASH_CR_DMAE);
+    }
+    else
+    {
+      /* Disable the DMA transfer */
+      HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+      /* Reset the InCount */
+      hhash->HashInCount = 0;
+
+      /* Change HASH peripheral state */
+      hhash->State = HAL_HASH_STATE_READY;
+
+      /* Call Input data transfer complete callback */
+      HAL_HASH_InCpltCallback(hhash);
+    }
+  }
+}
+
+/**
+  * @brief  DMA HASH communication error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void HASH_DMAError(DMA_HandleTypeDef *hdma)
+{
+  HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hhash->State= HAL_HASH_STATE_READY;
+  HAL_HASH_ErrorCallback(hhash);
+}
+
+/**
+  * @brief  Writes the input buffer in data register.
+  * @param  pInBuffer: Pointer to input buffer
+  * @param  Size: The size of input buffer
+  * @retval None
+  */
+static void HASH_WriteData(uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t buffercounter;
+  uint32_t inputaddr = (uint32_t) pInBuffer;
+
+  for(buffercounter = 0; buffercounter < Size; buffercounter+=4)
+  {
+    HASH->DIN = *(uint32_t*)inputaddr;
+    inputaddr+=4;
+  }
+}
+
+/**
+  * @brief  Provides the message digest result.
+  * @param  pMsgDigest: Pointer to the message digest
+  * @param  Size: The size of the message digest in bytes
+  * @retval None
+  */
+static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size)
+{
+  uint32_t msgdigest = (uint32_t)pMsgDigest;
+
+  switch(Size)
+  {
+  case 16:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    break;
+  case 20:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
+    break;
+  case 28:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
+    break;
+  case 32:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[7]);
+    break;
+  default:
+    break;
+  }
+}
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HASH_Exported_Functions
+  * @{
+  */
+
+
+/** @addtogroup HASH_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions.
+ *
+ at verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the HASH according to the specified parameters
+          in the HASH_InitTypeDef and creates the associated handle.
+      (+) DeInitialize the HASH peripheral.
+      (+) Initialize the HASH MSP.
+      (+) DeInitialize HASH MSP.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH according to the specified parameters in the
+            HASH_HandleTypeDef and creates the associated handle.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash)
+{
+  /* Check the hash handle allocation */
+  if(hhash == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_HASH_DATATYPE(hhash->Init.DataType));
+
+  if(hhash->State == HAL_HASH_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hhash->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_HASH_MspInit(hhash);
+  }
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Reset HashInCount, HashBuffSize and HashITCounter */
+  hhash->HashInCount = 0;
+  hhash->HashBuffSize = 0;
+  hhash->HashITCounter = 0;
+
+  /* Set the data type */
+  HASH->CR |= (uint32_t) (hhash->Init.DataType);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Set the default HASH phase */
+  hhash->Phase = HAL_HASH_PHASE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the HASH peripheral.
+  * @note   This API must be called before starting a new processing.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash)
+{
+  /* Check the HASH handle allocation */
+  if(hhash == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Set the default HASH phase */
+  hhash->Phase = HAL_HASH_PHASE_READY;
+
+  /* Reset HashInCount, HashBuffSize and HashITCounter */
+  hhash->HashInCount = 0;
+  hhash->HashBuffSize = 0;
+  hhash->HashITCounter = 0;
+
+  /* DeInit the low level hardware */
+  HAL_HASH_MspDeInit(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH MSP.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+__weak void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_HASH_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes HASH MSP.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+__weak void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_HASH_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Input data transfer complete callback.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+ __weak void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_HASH_InCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Data transfer Error callback.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+ __weak void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_HASH_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Digest computation complete callback. It is used only with interrupt.
+  * @note   This callback is not relevant with DMA.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+ __weak void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_HASH_DgstCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Functions_Group2 HASH processing functions using polling mode
+ *  @brief   processing functions using polling mode
+ *
+ at verbatim
+ ===============================================================================
+              ##### HASH processing using polling mode functions#####
+ ===============================================================================
+    [..]  This section provides functions allowing to calculate in polling mode
+          the hash value using one of the following algorithms:
+      (+) MD5
+      (+) SHA1
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in MD5 mode then processes pInBuffer.
+            The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is multiple of 64 bytes, appending the input buffer is possible.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware
+  *          and appending the input buffer is no more possible.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
+  * @param  Timeout: Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Write input buffer in data register */
+  HASH_WriteData(pInBuffer, Size);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Read the message digest */
+  HASH_GetDigest(pOutBuffer, 16);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in MD5 mode then writes the pInBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is multiple of 64 bytes, appending the input buffer is possible.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware
+  *          and appending the input buffer is no more possible.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Write input buffer in data register */
+  HASH_WriteData(pInBuffer, Size);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
+            The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @param  Timeout: Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA1 | HASH_CR_INIT;
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Write input buffer in data register */
+  HASH_WriteData(pInBuffer, Size);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hhash);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+  /* Read the message digest */
+  HASH_GetDigest(pOutBuffer, 20);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @note  Input buffer size in bytes must be a multiple of 4 otherwise the digest computation is corrupted.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+
+  /* Check the parameters */
+  assert_param(IS_HASH_SHA1_BUFFER_SIZE(Size));
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA1 | HASH_CR_INIT;
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Write input buffer in data register */
+  HASH_WriteData(pInBuffer, Size);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Functions_Group3 HASH processing functions using interrupt mode
+ *  @brief   processing functions using interrupt mode.
+ *
+ at verbatim
+ ===============================================================================
+              ##### HASH processing using interrupt mode functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to calculate in interrupt mode
+          the hash value using one of the following algorithms:
+      (+) MD5
+      (+) SHA1
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in MD5 mode then processes pInBuffer.
+  *         The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  uint32_t buffercounter;
+  uint32_t inputcounter;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  if(hhash->State == HAL_HASH_STATE_READY)
+  {
+    /* Change the HASH state */
+    hhash->State = HAL_HASH_STATE_BUSY;
+
+    hhash->HashInCount = Size;
+    hhash->pHashInBuffPtr = pInBuffer;
+    hhash->pHashOutBuffPtr = pOutBuffer;
+
+    /* Check if initialization phase has already been performed */
+    if(hhash->Phase == HAL_HASH_PHASE_READY)
+    {
+      /* Select the SHA1 mode */
+      HASH->CR |= HASH_ALGOSELECTION_MD5;
+      /* Reset the HASH processor core, so that the HASH will be ready to compute
+         the message digest of a new message */
+      HASH->CR |= HASH_CR_INIT;
+    }
+    /* Reset interrupt counter */
+    hhash->HashITCounter = 0;
+
+    /* Set the phase */
+    hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hhash);
+
+    /* Enable Interrupts */
+    HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+  {
+    outputaddr = (uint32_t)hhash->pHashOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[0]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[1]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[2]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[3]);
+
+    if(hhash->HashInCount == 0)
+    {
+      /* Disable Interrupts */
+      HASH->IMR = 0;
+      /* Change the HASH state */
+      hhash->State = HAL_HASH_STATE_READY;
+      /* Call digest computation complete callback */
+      HAL_HASH_DgstCpltCallback(hhash);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hhash);
+
+      /* Return function status */
+      return HAL_OK;
+    }
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+  {
+    if(hhash->HashInCount >= 68)
+    {
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < 64; buffercounter+=4)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      if(hhash->HashITCounter == 0)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+
+        if(hhash->HashInCount >= 68)
+        {
+          /* Decrement buffer counter */
+          hhash->HashInCount -= 68;
+          hhash->pHashInBuffPtr+= 68;
+        }
+        else
+        {
+          hhash->HashInCount = 0;
+          hhash->pHashInBuffPtr+= hhash->HashInCount;
+        }
+        /* Set Interrupt counter */
+        hhash->HashITCounter = 1;
+      }
+      else
+      {
+        /* Decrement buffer counter */
+        hhash->HashInCount -= 64;
+        hhash->pHashInBuffPtr+= 64;
+      }
+    }
+    else
+    {
+      /* Get the buffer address */
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Get the buffer counter */
+      inputcounter = hhash->HashInCount;
+      /* Disable Interrupts */
+      HASH->IMR &= ~(HASH_IT_DINI);
+      /* Configure the number of valid bits in last word of the message */
+      __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+
+      if((inputcounter > 4) && (inputcounter%4))
+      {
+        inputcounter = (inputcounter+4-inputcounter%4);
+      }
+      else if ((inputcounter < 4) && (inputcounter != 0))
+      {
+        inputcounter = 4;
+      }
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < inputcounter/4; buffercounter++)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      /* Start the digest calculation */
+      __HAL_HASH_START_DIGEST();
+      /* Reset buffer counter */
+      hhash->HashInCount = 0;
+
+      /* Call Input data transfer complete callback */
+      HAL_HASH_InCpltCallback(hhash);
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
+  *         The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  uint32_t buffercounter;
+  uint32_t inputcounter;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  if(hhash->State == HAL_HASH_STATE_READY)
+  {
+    /* Change the HASH state */
+    hhash->State = HAL_HASH_STATE_BUSY;
+
+    hhash->HashInCount = Size;
+    hhash->pHashInBuffPtr = pInBuffer;
+    hhash->pHashOutBuffPtr = pOutBuffer;
+
+    /* Check if initialization phase has already been performed */
+    if(hhash->Phase == HAL_HASH_PHASE_READY)
+    {
+      /* Select the SHA1 mode */
+      HASH->CR |= HASH_ALGOSELECTION_SHA1;
+      /* Reset the HASH processor core, so that the HASH will be ready to compute
+         the message digest of a new message */
+      HASH->CR |= HASH_CR_INIT;
+    }
+
+    /* Reset interrupt counter */
+    hhash->HashITCounter = 0;
+
+    /* Set the phase */
+    hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hhash);
+
+    /* Enable Interrupts */
+    HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+  {
+    outputaddr = (uint32_t)hhash->pHashOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[0]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[1]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[2]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[3]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[4]);
+    if(hhash->HashInCount == 0)
+    {
+      /* Disable Interrupts */
+      HASH->IMR = 0;
+      /* Change the HASH state */
+      hhash->State = HAL_HASH_STATE_READY;
+      /* Call digest computation complete callback */
+      HAL_HASH_DgstCpltCallback(hhash);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hhash);
+
+      /* Return function status */
+      return HAL_OK;
+    }
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+  {
+    if(hhash->HashInCount >= 68)
+    {
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < 64; buffercounter+=4)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      if(hhash->HashITCounter == 0)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        if(hhash->HashInCount >= 68)
+        {
+          /* Decrement buffer counter */
+          hhash->HashInCount -= 68;
+          hhash->pHashInBuffPtr+= 68;
+        }
+        else
+        {
+          hhash->HashInCount = 0;
+          hhash->pHashInBuffPtr+= hhash->HashInCount;
+        }
+        /* Set Interrupt counter */
+        hhash->HashITCounter = 1;
+      }
+      else
+      {
+        /* Decrement buffer counter */
+        hhash->HashInCount -= 64;
+        hhash->pHashInBuffPtr+= 64;
+      }
+    }
+    else
+    {
+      /* Get the buffer address */
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Get the buffer counter */
+      inputcounter = hhash->HashInCount;
+      /* Disable Interrupts */
+      HASH->IMR &= ~(HASH_IT_DINI);
+      /* Configure the number of valid bits in last word of the message */
+      __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+
+      if((inputcounter > 4) && (inputcounter%4))
+      {
+        inputcounter = (inputcounter+4-inputcounter%4);
+      }
+      else if ((inputcounter < 4) && (inputcounter != 0))
+      {
+        inputcounter = 4;
+      }
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < inputcounter/4; buffercounter++)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      /* Start the digest calculation */
+      __HAL_HASH_START_DIGEST();
+      /* Reset buffer counter */
+      hhash->HashInCount = 0;
+
+      /* Call Input data transfer complete callback */
+      HAL_HASH_InCpltCallback(hhash);
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief This function handles HASH interrupt request.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash)
+{
+  switch(HASH->CR & HASH_CR_ALGO)
+  {
+    case HASH_ALGOSELECTION_MD5:
+       HAL_HASH_MD5_Start_IT(hhash, NULL, 0, NULL);
+    break;
+
+    case HASH_ALGOSELECTION_SHA1:
+      HAL_HASH_SHA1_Start_IT(hhash, NULL, 0, NULL);
+    break;
+
+    default:
+    break;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Functions_Group4 HASH processing functions using DMA mode
+ *  @brief   processing functions using DMA mode.
+ *
+ at verbatim
+ ===============================================================================
+              ##### HASH processing using DMA mode functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to calculate in DMA mode
+          the hash value using one of the following algorithms:
+      (+) MD5
+      (+) SHA1
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in MD5 mode then enables DMA to
+            control data transfer. Use HAL_HASH_MD5_Finish() to get the digest.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr  = (uint32_t)pInBuffer;
+
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
+  }
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4 ? (Size+3)/4:Size/4));
+
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the computed digest in MD5 mode
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
+  * @param  Timeout: Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Read the message digest */
+  HASH_GetDigest(pOutBuffer, 16);
+
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA1 mode then enables DMA to
+            control data transfer. Use HAL_HASH_SHA1_Finish() to get the digest.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr  = (uint32_t)pInBuffer;
+
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA1;
+    HASH->CR |= HASH_CR_INIT;
+  }
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4 ? (Size+3)/4:Size/4));
+
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the computed digest in SHA1 mode.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @param  Timeout: Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Read the message digest */
+  HASH_GetDigest(pOutBuffer, 20);
+
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+   /* Process UnLock */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Functions_Group5 HASH-MAC (HMAC) processing functions using polling mode
+ *  @brief   HMAC processing functions using polling mode .
+ *
+ at verbatim
+ ===============================================================================
+              ##### HMAC processing using polling mode functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to calculate in polling mode
+          the HMAC value using one of the following algorithms:
+      (+) MD5
+      (+) SHA1
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC MD5 mode
+  *         then processes pInBuffer. The digest is available in pOutBuffer
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @param  Timeout: Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC MD5 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+    }
+    else
+    {
+      /* Select the HMAC MD5 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+    }
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /************************** STEP 1 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+  /* Write input buffer in data register */
+  HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 2 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Write input buffer in data register */
+  HASH_WriteData(pInBuffer, Size);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 3 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+  /* Write input buffer in data register */
+  HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Read the message digest */
+  HASH_GetDigest(pOutBuffer, 16);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC SHA1 mode
+  *         then processes pInBuffer. The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param   Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @param  Timeout: Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC SHA1 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+    }
+    else
+    {
+      /* Select the HMAC SHA1 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+    }
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /************************** STEP 1 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+  /* Write input buffer in data register */
+  HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 2 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Write input buffer in data register */
+  HASH_WriteData(pInBuffer, Size);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 3 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+  /* Write input buffer in data register */
+  HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /* Read the message digest */
+  HASH_GetDigest(pOutBuffer, 20);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Functions_Group6 HASH-MAC (HMAC) processing functions using DMA mode
+ *  @brief   HMAC processing functions using DMA mode .
+ *
+ at verbatim
+ ===============================================================================
+                ##### HMAC processing using DMA mode functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to calculate in DMA mode
+          the HMAC value using one of the following algorithms:
+      (+) MD5
+      (+) SHA1
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC MD5 mode
+  *         then enables DMA to control data transfer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr  = 0;
+
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Save buffer pointer and size in handle */
+  hhash->pHashInBuffPtr = pInBuffer;
+  hhash->HashBuffSize = Size;
+  hhash->HashInCount = 0;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC MD5 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+    }
+    else
+    {
+      /* Select the HMAC MD5 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+    }
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+  /* Get the key address */
+  inputaddr = (uint32_t)(hhash->Init.pKey);
+
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4 ? (hhash->Init.KeySize+3)/4:hhash->Init.KeySize/4));
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC SHA1 mode
+  *         then enables DMA to control data transfer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr  = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Save buffer pointer and size in handle */
+  hhash->pHashInBuffPtr = pInBuffer;
+  hhash->HashBuffSize = Size;
+  hhash->HashInCount = 0;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC SHA1 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+    }
+    else
+    {
+      /* Select the HMAC SHA1 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+    }
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+  /* Get the key address */
+  inputaddr = (uint32_t)(hhash->Init.pKey);
+
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASH_DMAError;
+
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4 ? (hhash->Init.KeySize+3)/4:hhash->Init.KeySize/4));
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Functions_Group7 Peripheral State functions
+ *  @brief   Peripheral State functions.
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral State functions #####
+ ===============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief return the HASH state
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval HAL state
+  */
+HAL_HASH_STATETypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash)
+{
+  return hhash->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
+#endif /* HAL_HASH_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash_ex.c
new file mode 100644
index 0000000..e05c88a
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash_ex.c
@@ -0,0 +1,1642 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_hash_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   HASH HAL Extension module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of HASH peripheral:
+  *           + Extended HASH processing functions based on SHA224 Algorithm
+  *           + Extended HASH processing functions based on SHA256 Algorithm
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The HASH HAL driver can be used as follows:
+    (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit():
+        (##) Enable the HASH interface clock using __HAL_RCC_HASH_CLK_ENABLE()
+        (##) In case of using processing APIs based on interrupts (e.g. HAL_HMACEx_SHA224_Start())
+            (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority()
+            (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ()
+            (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler()
+        (##) In case of using DMA to control data transfer (e.g. HAL_HMACEx_SH224_Start_DMA())
+            (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+            (+++) Configure and enable one DMA stream one for managing data transfer from
+                memory to peripheral (input stream). Managing data transfer from
+                peripheral to memory can be performed only using CPU
+            (+++) Associate the initialized DMA handle to the HASH DMA handle
+                using  __HAL_LINKDMA()
+            (+++) Configure the priority and enable the NVIC for the transfer complete
+                interrupt on the DMA Stream: HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+    (#)Initialize the HASH HAL using HAL_HASH_Init(). This function configures mainly:
+        (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit.
+        (##) For HMAC, the encryption key.
+        (##) For HMAC, the key size used for encryption.
+    (#)Three processing functions are available:
+        (##) Polling mode: processing APIs are blocking functions
+             i.e. they process the data and wait till the digest computation is finished
+             e.g. HAL_HASHEx_SHA224_Start()
+        (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+                i.e. they process the data under interrupt
+                e.g. HAL_HASHEx_SHA224_Start_IT()
+        (##) DMA mode: processing APIs are not blocking functions and the CPU is
+             not used for data transfer i.e. the data transfer is ensured by DMA
+                e.g. HAL_HASHEx_SHA224_Start_DMA()
+    (#)When the processing function is called at first time after HAL_HASH_Init()
+       the HASH peripheral is initialized and processes the buffer in input.
+       After that, the digest computation is started.
+       When processing multi-buffer use the accumulate function to write the
+       data in the peripheral without starting the digest computation. In last
+       buffer use the start function to input the last buffer ans start the digest
+       computation.
+       (##) e.g. HAL_HASHEx_SHA224_Accumulate() : write 1st data buffer in the peripheral without starting the digest computation
+       (##)  write (n-1)th data buffer in the peripheral without starting the digest computation
+       (##)  HAL_HASHEx_SHA224_Start() : write (n)th data buffer in the peripheral and start the digest computation
+    (#)In HMAC mode, there is no Accumulate API. Only Start API is available.
+    (#)In case of using DMA, call the DMA start processing e.g. HAL_HASHEx_SHA224_Start_DMA().
+       After that, call the finish function in order to get the digest value
+       e.g. HAL_HASHEx_SHA224_Finish()
+    (#)Call HAL_HASH_DeInit() to deinitialize the HASH peripheral.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HASHEx HASHEx
+  * @brief HASH Extension HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+
+#if defined(STM32F437xx) || defined(STM32F439xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup HASHEx_Private_Functions
+  * @{
+  */
+static void HASHEx_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void HASHEx_WriteData(uint8_t *pInBuffer, uint32_t Size);
+static void HASHEx_GetDigest(uint8_t *pMsgDigest, uint8_t Size);
+static void HASHEx_DMAError(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @addtogroup HASHEx_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Writes the input buffer in data register.
+  * @param  pInBuffer: Pointer to input buffer
+  * @param  Size: The size of input buffer
+  * @retval None
+  */
+static void HASHEx_WriteData(uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t buffercounter;
+  uint32_t inputaddr = (uint32_t) pInBuffer;
+
+  for(buffercounter = 0; buffercounter < Size; buffercounter+=4)
+  {
+    HASH->DIN = *(uint32_t*)inputaddr;
+    inputaddr+=4;
+  }
+}
+
+/**
+  * @brief  Provides the message digest result.
+  * @param  pMsgDigest: Pointer to the message digest
+  * @param  Size: The size of the message digest in bytes
+  * @retval None
+  */
+static void HASHEx_GetDigest(uint8_t *pMsgDigest, uint8_t Size)
+{
+  uint32_t msgdigest = (uint32_t)pMsgDigest;
+
+  switch(Size)
+  {
+  case 16:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    break;
+  case 20:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
+    break;
+  case 28:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
+    break;
+  case 32:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[7]);
+    break;
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  DMA HASH Input Data complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void HASHEx_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+  HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  uint32_t inputaddr = 0;
+  uint32_t buffersize = 0;
+
+  if((HASH->CR & HASH_CR_MODE) != HASH_CR_MODE)
+  {
+    /* Disable the DMA transfer */
+    HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+    /* Change HASH peripheral state */
+    hhash->State = HAL_HASH_STATE_READY;
+
+    /* Call Input data transfer complete callback */
+    HAL_HASH_InCpltCallback(hhash);
+  }
+  else
+  {
+    /* Increment Interrupt counter */
+    hhash->HashInCount++;
+    /* Disable the DMA transfer before starting the next transfer */
+    HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+    if(hhash->HashInCount <= 2)
+    {
+      /* In case HashInCount = 1, set the DMA to transfer data to HASH DIN register */
+      if(hhash->HashInCount == 1)
+      {
+        inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+        buffersize = hhash->HashBuffSize;
+      }
+      /* In case HashInCount = 2, set the DMA to transfer key to HASH DIN register */
+      else if(hhash->HashInCount == 2)
+      {
+        inputaddr = (uint32_t)hhash->Init.pKey;
+        buffersize = hhash->Init.KeySize;
+      }
+      /* Configure the number of valid bits in last word of the message */
+      MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8 * (buffersize % 4));
+
+      /* Set the HASH DMA transfer complete */
+      hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+
+      /* Enable the DMA In DMA Stream */
+      HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (buffersize%4 ? (buffersize+3)/4:buffersize/4));
+
+      /* Enable DMA requests */
+      HASH->CR |= (HASH_CR_DMAE);
+    }
+    else
+    {
+      /* Disable the DMA transfer */
+      HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+
+      /* Reset the InCount */
+      hhash->HashInCount = 0;
+
+      /* Change HASH peripheral state */
+      hhash->State = HAL_HASH_STATE_READY;
+
+      /* Call Input data transfer complete callback */
+      HAL_HASH_InCpltCallback(hhash);
+    }
+  }
+}
+
+/**
+  * @brief  DMA HASH communication error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void HASHEx_DMAError(DMA_HandleTypeDef *hdma)
+{
+  HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hhash->State= HAL_HASH_STATE_READY;
+  HAL_HASH_ErrorCallback(hhash);
+}
+
+ /**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HASHEx_Exported_Functions
+  * @{
+  */
+
+/** @defgroup  HASHEx_Group1 HASH processing functions
+ *  @brief   processing functions using polling mode
+ *
+ at verbatim
+ ===============================================================================
+              ##### HASH processing using polling mode functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to calculate in polling mode
+          the hash value using one of the following algorithms:
+      (+) SHA224
+      (+) SHA256
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA224 mode
+  *         then processes pInBuffer. The digest is available in pOutBuffer
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 28 bytes.
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Write input buffer in data register */
+  HASHEx_WriteData(pInBuffer, Size);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Read the message digest */
+  HASHEx_GetDigest(pOutBuffer, 28);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
+            The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 32 bytes.
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Write input buffer in data register */
+  HASHEx_WriteData(pInBuffer, Size);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Read the message digest */
+  HASHEx_GetDigest(pOutBuffer, 32);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA224 mode
+  *         then processes pInBuffer. The digest is available in pOutBuffer
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Write input buffer in data register */
+  HASHEx_WriteData(pInBuffer, Size);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
+            The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Write input buffer in data register */
+  HASHEx_WriteData(pInBuffer, Size);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup HASHEx_Group2 HMAC processing functions using polling mode
+ *  @brief   HMAC processing functions using polling mode .
+ *
+ at verbatim
+ ===============================================================================
+            ##### HMAC processing using polling mode functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to calculate in polling mode
+          the HMAC value using one of the following algorithms:
+      (+) SHA224
+      (+) SHA256
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC SHA224 mode
+  *         then processes pInBuffer. The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @param  Timeout: Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC SHA224 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+    }
+    else
+    {
+      /* Select the HMAC SHA224 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+    }
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /************************** STEP 1 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+  /* Write input buffer in data register */
+  HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 2 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Write input buffer in data register */
+  HASHEx_WriteData(pInBuffer, Size);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 3 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+  /* Write input buffer in data register */
+  HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /* Read the message digest */
+  HASHEx_GetDigest(pOutBuffer, 28);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC SHA256 mode
+  *         then processes pInBuffer. The digest is available in pOutBuffer
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @param  Timeout: Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC SHA256 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY);
+    }
+    else
+    {
+      /* Select the HMAC SHA256 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC);
+    }
+    /* Reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_CR_INIT;
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /************************** STEP 1 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+  /* Write input buffer in data register */
+  HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 2 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Write input buffer in data register */
+  HASHEx_WriteData(pInBuffer, Size);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 3 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+  /* Write input buffer in data register */
+  HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /* Read the message digest */
+  HASHEx_GetDigest(pOutBuffer, 32);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASHEx_Group3 HASH processing functions using interrupt mode
+ *  @brief   processing functions using interrupt mode.
+ *
+ at verbatim
+ ===============================================================================
+              ##### HASH processing using interrupt functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to calculate in interrupt mode
+          the hash value using one of the following algorithms:
+      (+) SHA224
+      (+) SHA256
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA224 mode then processes pInBuffer.
+  *         The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+  uint32_t inputaddr;
+  uint32_t buffercounter;
+  uint32_t inputcounter;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  if(hhash->State == HAL_HASH_STATE_READY)
+  {
+    /* Change the HASH state */
+    hhash->State = HAL_HASH_STATE_BUSY;
+
+    hhash->HashInCount = Size;
+    hhash->pHashInBuffPtr = pInBuffer;
+    hhash->pHashOutBuffPtr = pOutBuffer;
+
+    /* Check if initialization phase has already been performed */
+    if(hhash->Phase == HAL_HASH_PHASE_READY)
+    {
+      /* Select the SHA224 mode */
+      HASH->CR |= HASH_ALGOSELECTION_SHA224;
+      /* Reset the HASH processor core, so that the HASH will be ready to compute
+         the message digest of a new message */
+      HASH->CR |= HASH_CR_INIT;
+    }
+
+    /* Reset interrupt counter */
+    hhash->HashITCounter = 0;
+
+    /* Set the phase */
+    hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hhash);
+
+    /* Enable Interrupts */
+    HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+  {
+    /* Read the message digest */
+    HASHEx_GetDigest(hhash->pHashOutBuffPtr, 28);
+    if(hhash->HashInCount == 0)
+    {
+      /* Disable Interrupts */
+      HASH->IMR = 0;
+      /* Change the HASH state */
+      hhash->State = HAL_HASH_STATE_READY;
+      /* Call digest computation complete callback */
+      HAL_HASH_DgstCpltCallback(hhash);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hhash);
+
+      /* Return function status */
+      return HAL_OK;
+    }
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+  {
+    if(hhash->HashInCount >= 68)
+    {
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < 64; buffercounter+=4)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      if(hhash->HashITCounter == 0)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+
+        if(hhash->HashInCount >= 68)
+        {
+          /* Decrement buffer counter */
+          hhash->HashInCount -= 68;
+          hhash->pHashInBuffPtr+= 68;
+        }
+        else
+        {
+          hhash->HashInCount = 0;
+          hhash->pHashInBuffPtr+= hhash->HashInCount;
+        }
+        /* Set Interrupt counter */
+        hhash->HashITCounter = 1;
+      }
+      else
+      {
+        /* Decrement buffer counter */
+        hhash->HashInCount -= 64;
+        hhash->pHashInBuffPtr+= 64;
+      }
+    }
+    else
+    {
+      /* Get the buffer address */
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Get the buffer counter */
+      inputcounter = hhash->HashInCount;
+      /* Disable Interrupts */
+      HASH->IMR &= ~(HASH_IT_DINI);
+      /* Configure the number of valid bits in last word of the message */
+      __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+
+      if((inputcounter > 4) && (inputcounter%4))
+      {
+        inputcounter = (inputcounter+4-inputcounter%4);
+      }
+      else if ((inputcounter < 4) && (inputcounter != 0))
+      {
+        inputcounter = 4;
+      }
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < inputcounter/4; buffercounter++)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      /* Start the digest calculation */
+      __HAL_HASH_START_DIGEST();
+      /* Reset buffer counter */
+      hhash->HashInCount = 0;
+
+     /* Call Input data transfer complete callback */
+     HAL_HASH_InCpltCallback(hhash);
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
+  *         The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+  uint32_t inputaddr;
+  uint32_t buffercounter;
+  uint32_t inputcounter;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  if(hhash->State == HAL_HASH_STATE_READY)
+  {
+    /* Change the HASH state */
+    hhash->State = HAL_HASH_STATE_BUSY;
+
+    hhash->HashInCount = Size;
+    hhash->pHashInBuffPtr = pInBuffer;
+    hhash->pHashOutBuffPtr = pOutBuffer;
+
+    /* Check if initialization phase has already been performed */
+    if(hhash->Phase == HAL_HASH_PHASE_READY)
+    {
+      /* Select the SHA256 mode */
+      HASH->CR |= HASH_ALGOSELECTION_SHA256;
+      /* Reset the HASH processor core, so that the HASH will be ready to compute
+         the message digest of a new message */
+      HASH->CR |= HASH_CR_INIT;
+    }
+
+    /* Reset interrupt counter */
+    hhash->HashITCounter = 0;
+
+    /* Set the phase */
+    hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hhash);
+
+    /* Enable Interrupts */
+    HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+  {
+    /* Read the message digest */
+    HASHEx_GetDigest(hhash->pHashOutBuffPtr, 32);
+    if(hhash->HashInCount == 0)
+    {
+      /* Disable Interrupts */
+      HASH->IMR = 0;
+      /* Change the HASH state */
+      hhash->State = HAL_HASH_STATE_READY;
+      /* Call digest computation complete callback */
+      HAL_HASH_DgstCpltCallback(hhash);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hhash);
+
+      /* Return function status */
+      return HAL_OK;
+    }
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+  {
+    if(hhash->HashInCount >= 68)
+    {
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < 64; buffercounter+=4)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      if(hhash->HashITCounter == 0)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+
+        if(hhash->HashInCount >= 68)
+        {
+          /* Decrement buffer counter */
+          hhash->HashInCount -= 68;
+          hhash->pHashInBuffPtr+= 68;
+        }
+        else
+        {
+          hhash->HashInCount = 0;
+          hhash->pHashInBuffPtr+= hhash->HashInCount;
+        }
+        /* Set Interrupt counter */
+        hhash->HashITCounter = 1;
+      }
+      else
+      {
+        /* Decrement buffer counter */
+        hhash->HashInCount -= 64;
+        hhash->pHashInBuffPtr+= 64;
+      }
+    }
+    else
+    {
+      /* Get the buffer address */
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Get the buffer counter */
+      inputcounter = hhash->HashInCount;
+      /* Disable Interrupts */
+      HASH->IMR &= ~(HASH_IT_DINI);
+      /* Configure the number of valid bits in last word of the message */
+      __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+
+      if((inputcounter > 4) && (inputcounter%4))
+      {
+        inputcounter = (inputcounter+4-inputcounter%4);
+      }
+      else if ((inputcounter < 4) && (inputcounter != 0))
+      {
+        inputcounter = 4;
+      }
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < inputcounter/4; buffercounter++)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      /* Start the digest calculation */
+      __HAL_HASH_START_DIGEST();
+      /* Reset buffer counter */
+      hhash->HashInCount = 0;
+
+     /* Call Input data transfer complete callback */
+     HAL_HASH_InCpltCallback(hhash);
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief This function handles HASH interrupt request.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash)
+{
+  switch(HASH->CR & HASH_CR_ALGO)
+  {
+
+    case HASH_ALGOSELECTION_SHA224:
+       HAL_HASHEx_SHA224_Start_IT(hhash, NULL, 0, NULL);
+    break;
+
+    case HASH_ALGOSELECTION_SHA256:
+      HAL_HASHEx_SHA256_Start_IT(hhash, NULL, 0, NULL);
+    break;
+
+    default:
+    break;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASHEx_Group4 HASH processing functions using DMA mode
+ *  @brief   processing functions using DMA mode.
+ *
+ at verbatim
+ ===============================================================================
+                ##### HASH processing using DMA functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to calculate in DMA mode
+          the hash value using one of the following algorithms:
+      (+) SHA224
+      (+) SHA256
+
+ at endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA224 mode then enables DMA to
+            control data transfer. Use HAL_HASH_SHA224_Finish() to get the digest.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr  = (uint32_t)pInBuffer;
+
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
+  }
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4 ? (Size+3)/4:Size/4));
+
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the computed digest in SHA224
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 28 bytes.
+  * @param  Timeout: Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Read the message digest */
+  HASHEx_GetDigest(pOutBuffer, 28);
+
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA256 mode then enables DMA to
+            control data transfer. Use HAL_HASH_SHA256_Finish() to get the digest.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr  = (uint32_t)pInBuffer;
+
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
+  }
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4 ? (Size+3)/4:Size/4));
+
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+
+   /* Process UnLock */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the computed digest in SHA256.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 32 bytes.
+  * @param  Timeout: Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Read the message digest */
+  HASHEx_GetDigest(pOutBuffer, 32);
+
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @}
+  */
+/** @defgroup HASHEx_Group5 HMAC processing functions using DMA mode
+ *  @brief   HMAC processing functions using DMA mode .
+ *
+ at verbatim
+ ===============================================================================
+                ##### HMAC processing using DMA functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to calculate in DMA mode
+          the HMAC value using one of the following algorithms:
+      (+) SHA224
+      (+) SHA256
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC SHA224 mode
+  *         then enables DMA to control data transfer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Save buffer pointer and size in handle */
+  hhash->pHashInBuffPtr = pInBuffer;
+  hhash->HashBuffSize = Size;
+  hhash->HashInCount = 0;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC SHA224 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+    }
+    else
+    {
+      /* Select the HMAC SHA224 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+    }
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+  /* Get the key address */
+  inputaddr = (uint32_t)(hhash->Init.pKey);
+
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4 ? (hhash->Init.KeySize+3)/4:hhash->Init.KeySize/4));
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC SHA256 mode
+  *         then enables DMA to control data transfer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr;
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+
+  /* Save buffer pointer and size in handle */
+  hhash->pHashInBuffPtr = pInBuffer;
+  hhash->HashBuffSize = Size;
+  hhash->HashInCount = 0;
+
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC SHA256 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY);
+    }
+    else
+    {
+      /* Select the HMAC SHA256 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC);
+    }
+    /* Reset the HASH processor core, so that the HASH will be ready to compute
+       the message digest of a new message */
+    HASH->CR |= HASH_CR_INIT;
+  }
+
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+
+  /* Get the key address */
+  inputaddr = (uint32_t)(hhash->Init.pKey);
+
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4 ? (hhash->Init.KeySize+3)/4:hhash->Init.KeySize/4));
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F437xx || STM32F439xx */
+
+#endif /* HAL_HASH_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c
new file mode 100644
index 0000000..c441ec2
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c
@@ -0,0 +1,1215 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_hcd.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   HCD HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the USB Peripheral Controller:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    (#)Declare a HCD_HandleTypeDef handle structure, for example:
+       HCD_HandleTypeDef  hhcd;
+
+    (#)Fill parameters of Init structure in HCD handle
+
+    (#)Call HAL_HCD_Init() API to initialize the HCD peripheral (Core, Host core, ...)
+
+    (#)Initialize the HCD low level resources through the HAL_HCD_MspInit() API:
+        (##) Enable the HCD/USB Low Level interface clock using the following macros
+             (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+             (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode)
+             (+++) __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); (For High Speed Mode)
+
+        (##) Initialize the related GPIO clocks
+        (##) Configure HCD pin-out
+        (##) Configure HCD NVIC interrupt
+
+    (#)Associate the Upper USB Host stack to the HAL HCD Driver:
+        (##) hhcd.pData = phost;
+
+    (#)Enable HCD transmission and reception:
+        (##) HAL_HCD_Start();
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HCD HCD
+  * @brief HCD HAL module driver
+  * @{
+  */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup HCD_Private_Functions HCD Private Functions
+  * @{
+  */
+static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd);
+static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Functions HCD Exported Functions
+  * @{
+  */
+
+/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+          ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initialize the host driver.
+  * @param  hhcd: HCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd)
+{
+  /* Check the HCD handle allocation */
+  if(hhcd == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_HCD_ALL_INSTANCE(hhcd->Instance));
+
+  hhcd->State = HAL_HCD_STATE_BUSY;
+
+  /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+  HAL_HCD_MspInit(hhcd);
+
+  /* Disable the Interrupts */
+  __HAL_HCD_DISABLE(hhcd);
+
+  /* Init the Core (common init.) */
+  USB_CoreInit(hhcd->Instance, hhcd->Init);
+
+  /* Force Host Mode*/
+  USB_SetCurrentMode(hhcd->Instance , USB_OTG_HOST_MODE);
+
+  /* Init Host */
+  USB_HostInit(hhcd->Instance, hhcd->Init);
+
+  hhcd->State= HAL_HCD_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize a host channel.
+  * @param  hhcd: HCD handle
+  * @param  ch_num: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @param  epnum: Endpoint number.
+  *          This parameter can be a value from 1 to 15
+  * @param  dev_address : Current device address
+  *          This parameter can be a value from 0 to 255
+  * @param  speed: Current device speed.
+  *          This parameter can be one of these values:
+  *            HCD_SPEED_HIGH: High speed mode,
+  *            HCD_SPEED_FULL: Full speed mode,
+  *            HCD_SPEED_LOW: Low speed mode
+  * @param  ep_type: Endpoint Type.
+  *          This parameter can be one of these values:
+  *            EP_TYPE_CTRL: Control type,
+  *            EP_TYPE_ISOC: Isochronous type,
+  *            EP_TYPE_BULK: Bulk type,
+  *            EP_TYPE_INTR: Interrupt type
+  * @param  mps: Max Packet Size.
+  *          This parameter can be a value from 0 to32K
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
+                                  uint8_t ch_num,
+                                  uint8_t epnum,
+                                  uint8_t dev_address,
+                                  uint8_t speed,
+                                  uint8_t ep_type,
+                                  uint16_t mps)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  __HAL_LOCK(hhcd);
+
+  hhcd->hc[ch_num].dev_addr = dev_address;
+  hhcd->hc[ch_num].max_packet = mps;
+  hhcd->hc[ch_num].ch_num = ch_num;
+  hhcd->hc[ch_num].ep_type = ep_type;
+  hhcd->hc[ch_num].ep_num = epnum & 0x7F;
+  hhcd->hc[ch_num].ep_is_in = ((epnum & 0x80) == 0x80);
+  hhcd->hc[ch_num].speed = speed;
+
+  status =  USB_HC_Init(hhcd->Instance,
+                        ch_num,
+                        epnum,
+                        dev_address,
+                        speed,
+                        ep_type,
+                        mps);
+  __HAL_UNLOCK(hhcd);
+
+  return status;
+}
+
+/**
+  * @brief  Halt a host channel.
+  * @param  hhcd: HCD handle
+  * @param  ch_num: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  __HAL_LOCK(hhcd);
+  USB_HC_Halt(hhcd->Instance, ch_num);
+  __HAL_UNLOCK(hhcd);
+
+  return status;
+}
+
+/**
+  * @brief  DeInitialize the host driver.
+  * @param  hhcd: HCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd)
+{
+  /* Check the HCD handle allocation */
+  if(hhcd == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  hhcd->State = HAL_HCD_STATE_BUSY;
+
+  /* DeInit the low level hardware */
+  HAL_HCD_MspDeInit(hhcd);
+
+  __HAL_HCD_DISABLE(hhcd);
+
+  hhcd->State = HAL_HCD_STATE_RESET;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the HCD MSP.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+__weak void  HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitialize the HCD MSP.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+__weak void  HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Exported_Functions_Group2 Input and Output operation functions
+  *  @brief   HCD IO operation functions
+  *
+ at verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to manage the USB Host Data
+    Transfer
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Submit a new URB for processing.
+  * @param  hhcd: HCD handle
+  * @param  ch_num: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @param  direction: Channel number.
+  *          This parameter can be one of these values:
+  *           0 : Output / 1 : Input
+  * @param  ep_type: Endpoint Type.
+  *          This parameter can be one of these values:
+  *            EP_TYPE_CTRL: Control type/
+  *            EP_TYPE_ISOC: Isochronous type/
+  *            EP_TYPE_BULK: Bulk type/
+  *            EP_TYPE_INTR: Interrupt type/
+  * @param  token: Endpoint Type.
+  *          This parameter can be one of these values:
+  *            0: HC_PID_SETUP / 1: HC_PID_DATA1
+  * @param  pbuff: pointer to URB data
+  * @param  length: Length of URB data
+  * @param  do_ping: activate do ping protocol (for high speed only).
+  *          This parameter can be one of these values:
+  *           0 : do ping inactive / 1 : do ping active
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
+                                           uint8_t ch_num,
+                                           uint8_t direction,
+                                           uint8_t ep_type,
+                                           uint8_t token,
+                                           uint8_t* pbuff,
+                                           uint16_t length,
+                                           uint8_t do_ping)
+{
+  hhcd->hc[ch_num].ep_is_in = direction;
+  hhcd->hc[ch_num].ep_type  = ep_type;
+
+  if(token == 0)
+  {
+    hhcd->hc[ch_num].data_pid = HC_PID_SETUP;
+  }
+  else
+  {
+    hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+  }
+
+  /* Manage Data Toggle */
+  switch(ep_type)
+  {
+  case EP_TYPE_CTRL:
+    if((token == 1) && (direction == 0)) /*send data */
+    {
+      if ( length == 0 )
+      { /* For Status OUT stage, Length==0, Status Out PID = 1 */
+        hhcd->hc[ch_num].toggle_out = 1;
+      }
+
+      /* Set the Data Toggle bit as per the Flag */
+      if ( hhcd->hc[ch_num].toggle_out == 0)
+      { /* Put the PID 0 */
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+      }
+      else
+      { /* Put the PID 1 */
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+      }
+      if(hhcd->hc[ch_num].urb_state  != URB_NOTREADY)
+      {
+        hhcd->hc[ch_num].do_ping = do_ping;
+      }
+    }
+    break;
+
+  case EP_TYPE_BULK:
+    if(direction == 0)
+    {
+      /* Set the Data Toggle bit as per the Flag */
+      if ( hhcd->hc[ch_num].toggle_out == 0)
+      { /* Put the PID 0 */
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+      }
+      else
+      { /* Put the PID 1 */
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+      }
+      if(hhcd->hc[ch_num].urb_state  != URB_NOTREADY)
+      {
+        hhcd->hc[ch_num].do_ping = do_ping;
+      }
+    }
+    else
+    {
+      if( hhcd->hc[ch_num].toggle_in == 0)
+      {
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+      }
+      else
+      {
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+      }
+    }
+
+    break;
+  case EP_TYPE_INTR:
+    if(direction == 0)
+    {
+      /* Set the Data Toggle bit as per the Flag */
+      if ( hhcd->hc[ch_num].toggle_out == 0)
+      { /* Put the PID 0 */
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+      }
+      else
+      { /* Put the PID 1 */
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+      }
+    }
+    else
+    {
+      if( hhcd->hc[ch_num].toggle_in == 0)
+      {
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+      }
+      else
+      {
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+      }
+    }
+    break;
+
+  case EP_TYPE_ISOC:
+    hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+    break;
+  }
+
+  hhcd->hc[ch_num].xfer_buff = pbuff;
+  hhcd->hc[ch_num].xfer_len  = length;
+  hhcd->hc[ch_num].urb_state =   URB_IDLE;
+  hhcd->hc[ch_num].xfer_count = 0;
+  hhcd->hc[ch_num].ch_num = ch_num;
+  hhcd->hc[ch_num].state = HC_IDLE;
+
+  return USB_HC_StartXfer(hhcd->Instance, &(hhcd->hc[ch_num]), hhcd->Init.dma_enable);
+}
+
+/**
+  * @brief  Handle HCD interrupt request.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+  uint32_t i = 0 , interrupt = 0;
+
+  /* Ensure that we are in device mode */
+  if (USB_GetMode(hhcd->Instance) == USB_OTG_MODE_HOST)
+  {
+    /* Avoid spurious interrupt */
+    if(__HAL_HCD_IS_INVALID_INTERRUPT(hhcd))
+    {
+      return;
+    }
+
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
+    {
+      /* Incorrect mode, acknowledge the interrupt */
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
+    }
+
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR))
+    {
+      /* Incorrect mode, acknowledge the interrupt */
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR);
+    }
+
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE))
+    {
+      /* Incorrect mode, acknowledge the interrupt */
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE);
+    }
+
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_MMIS))
+    {
+      /* Incorrect mode, acknowledge the interrupt */
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_MMIS);
+    }
+
+    /* Handle Host Disconnect Interrupts */
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT))
+    {
+
+      /* Cleanup HPRT */
+      USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+        USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+      /* Handle Host Port Interrupts */
+      HAL_HCD_Disconnect_Callback(hhcd);
+      USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT);
+    }
+
+    /* Handle Host Port Interrupts */
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HPRTINT))
+    {
+      HCD_Port_IRQHandler (hhcd);
+    }
+
+    /* Handle Host SOF Interrupts */
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_SOF))
+    {
+      HAL_HCD_SOF_Callback(hhcd);
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_SOF);
+    }
+
+    /* Handle Host channel Interrupts */
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HCINT))
+    {
+      interrupt = USB_HC_ReadInterrupt(hhcd->Instance);
+      for (i = 0; i < hhcd->Init.Host_channels; i++)
+      {
+        if (interrupt & (1 << i))
+        {
+          if ((USBx_HC(i)->HCCHAR) &  USB_OTG_HCCHAR_EPDIR)
+          {
+            HCD_HC_IN_IRQHandler(hhcd, i);
+          }
+          else
+          {
+            HCD_HC_OUT_IRQHandler (hhcd, i);
+          }
+        }
+      }
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_HCINT);
+    }
+
+    /* Handle Rx Queue Level Interrupts */
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL))
+    {
+      USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+
+      HCD_RXQLVL_IRQHandler (hhcd);
+
+      USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+    }
+  }
+}
+
+/**
+  * @brief  SOF callback.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+__weak void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_HCD_SOF_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Connection Event callback.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+__weak void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_HCD_Connect_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Disconnection Event callback.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+__weak void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_HCD_Disconnect_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Notify URB state change callback.
+  * @param  hhcd: HCD handle
+  * @param  chnum: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @param  urb_state:
+  *          This parameter can be one of these values:
+  *            URB_IDLE/
+  *            URB_DONE/
+  *            URB_NOTREADY/
+  *            URB_NYET/
+  *            URB_ERROR/
+  *            URB_STALL/
+  * @retval None
+  */
+__weak void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, HCD_URBStateTypeDef urb_state)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_HCD_HC_NotifyURBChange_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief   Management functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the HCD data
+    transfers.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Start the host driver.
+  * @param  hhcd: HCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd)
+{
+  __HAL_LOCK(hhcd);
+  __HAL_HCD_ENABLE(hhcd);
+  USB_DriveVbus(hhcd->Instance, 1);
+  __HAL_UNLOCK(hhcd);
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop the host driver.
+  * @param  hhcd: HCD handle
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd)
+{
+  __HAL_LOCK(hhcd);
+  USB_StopHost(hhcd->Instance);
+  __HAL_UNLOCK(hhcd);
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reset the host port.
+  * @param  hhcd: HCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd)
+{
+  return (USB_ResetPort(hhcd->Instance));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Exported_Functions_Group4 Peripheral State functions
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral State functions #####
+ ===============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the HCD handle state.
+  * @param  hhcd: HCD handle
+  * @retval HAL state
+  */
+HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd)
+{
+  return hhcd->State;
+}
+
+/**
+  * @brief  Return  URB state for a channel.
+  * @param  hhcd: HCD handle
+  * @param  chnum: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval URB state.
+  *          This parameter can be one of these values:
+  *            URB_IDLE/
+  *            URB_DONE/
+  *            URB_NOTREADY/
+  *            URB_NYET/
+  *            URB_ERROR/
+  *            URB_STALL
+  */
+HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+  return hhcd->hc[chnum].urb_state;
+}
+
+
+/**
+  * @brief  Return the last host transfer size.
+  * @param  hhcd: HCD handle
+  * @param  chnum: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval last transfer size in byte
+  */
+uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+  return hhcd->hc[chnum].xfer_count;
+}
+
+/**
+  * @brief  Return the Host Channel state.
+  * @param  hhcd: HCD handle
+  * @param  chnum: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval Host channel state
+  *          This parameter can be one of these values:
+  *            HC_IDLE/
+  *            HC_XFRC/
+  *            HC_HALTED/
+  *            HC_NYET/
+  *            HC_NAK/
+  *            HC_STALL/
+  *            HC_XACTERR/
+  *            HC_BBLERR/
+  *            HC_DATATGLERR
+  */
+HCD_HCStateTypeDef  HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+  return hhcd->hc[chnum].state;
+}
+
+/**
+  * @brief  Return the current Host frame number.
+  * @param  hhcd: HCD handle
+  * @retval Current Host frame number
+  */
+uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd)
+{
+  return (USB_GetCurrentFrame(hhcd->Instance));
+}
+
+/**
+  * @brief  Return the Host enumeration speed.
+  * @param  hhcd: HCD handle
+  * @retval Enumeration speed
+  */
+uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd)
+{
+  return (USB_GetHostSpeed(hhcd->Instance));
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup HCD_Private_Functions
+  * @{
+  */
+/**
+  * @brief  Handle Host Channel IN interrupt requests.
+  * @param  hhcd: HCD handle
+  * @param  chnum: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval None
+  */
+static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+  USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+  uint32_t tmpreg = 0;
+
+  if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_AHBERR)
+  {
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+  }
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_ACK)
+  {
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
+  }
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_STALL)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    hhcd->hc[chnum].state = HC_STALL;
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
+    USB_HC_Halt(hhcd->Instance, chnum);
+  }
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_DTERR)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    USB_HC_Halt(hhcd->Instance, chnum);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+    hhcd->hc[chnum].state = HC_DATATGLERR;
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
+  }
+
+  if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_FRMOR)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    USB_HC_Halt(hhcd->Instance, chnum);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
+  }
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_XFRC)
+  {
+
+    if (hhcd->Init.dma_enable)
+    {
+      hhcd->hc[chnum].xfer_count = hhcd->hc[chnum].xfer_len - \
+        (USBx_HC(chnum)->HCTSIZ & USB_OTG_HCTSIZ_XFRSIZ);
+    }
+
+    hhcd->hc[chnum].state = HC_XFRC;
+    hhcd->hc[chnum].ErrCnt = 0;
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
+
+
+    if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL)||
+        (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
+    {
+      __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+      USB_HC_Halt(hhcd->Instance, chnum);
+      __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+
+    }
+    else if(hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
+    {
+      USBx_HC(chnum)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM;
+      hhcd->hc[chnum].urb_state = URB_DONE;
+      HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+    }
+    hhcd->hc[chnum].toggle_in ^= 1;
+
+  }
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_CHH)
+  {
+    __HAL_HCD_MASK_HALT_HC_INT(chnum);
+
+    if(hhcd->hc[chnum].state == HC_XFRC)
+    {
+      hhcd->hc[chnum].urb_state  = URB_DONE;
+    }
+
+    else if (hhcd->hc[chnum].state == HC_STALL)
+    {
+      hhcd->hc[chnum].urb_state  = URB_STALL;
+    }
+
+    else if((hhcd->hc[chnum].state == HC_XACTERR) ||
+            (hhcd->hc[chnum].state == HC_DATATGLERR))
+    {
+      if(hhcd->hc[chnum].ErrCnt++ > 3)
+      {
+        hhcd->hc[chnum].ErrCnt = 0;
+        hhcd->hc[chnum].urb_state = URB_ERROR;
+      }
+      else
+      {
+        hhcd->hc[chnum].urb_state = URB_NOTREADY;
+      }
+
+      /* re-activate the channel  */
+      tmpreg = USBx_HC(chnum)->HCCHAR;
+      tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+      tmpreg |= USB_OTG_HCCHAR_CHENA;
+      USBx_HC(chnum)->HCCHAR = tmpreg;
+    }
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
+    HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+  }
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_TXERR)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    hhcd->hc[chnum].ErrCnt++;
+    hhcd->hc[chnum].state = HC_XACTERR;
+    USB_HC_Halt(hhcd->Instance, chnum);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
+  }
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_NAK)
+  {
+    if(hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
+    {
+      __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+      USB_HC_Halt(hhcd->Instance, chnum);
+    }
+    else if  ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL)||
+              (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
+    {
+      /* re-activate the channel */
+      tmpreg = USBx_HC(chnum)->HCCHAR;
+      tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+      tmpreg |= USB_OTG_HCCHAR_CHENA;
+      USBx_HC(chnum)->HCCHAR = tmpreg;
+    }
+    hhcd->hc[chnum].state = HC_NAK;
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+  }
+}
+
+/**
+  * @brief  Handle Host Channel OUT interrupt requests.
+  * @param  hhcd: HCD handle
+  * @param  chnum: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval None
+  */
+static void HCD_HC_OUT_IRQHandler  (HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+  USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+  uint32_t tmpreg = 0;
+
+  if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_AHBERR)
+  {
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+  }
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_ACK)
+  {
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
+
+    if( hhcd->hc[chnum].do_ping == 1)
+    {
+      hhcd->hc[chnum].state = HC_NYET;
+      __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+      USB_HC_Halt(hhcd->Instance, chnum);
+      hhcd->hc[chnum].urb_state  = URB_NOTREADY;
+    }
+  }
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_NYET)
+  {
+    hhcd->hc[chnum].state = HC_NYET;
+    hhcd->hc[chnum].ErrCnt= 0;
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    USB_HC_Halt(hhcd->Instance, chnum);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NYET);
+
+  }
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_FRMOR)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    USB_HC_Halt(hhcd->Instance, chnum);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
+  }
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_XFRC)
+  {
+      hhcd->hc[chnum].ErrCnt = 0;
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    USB_HC_Halt(hhcd->Instance, chnum);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
+    hhcd->hc[chnum].state = HC_XFRC;
+
+  }
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_STALL)
+  {
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    USB_HC_Halt(hhcd->Instance, chnum);
+    hhcd->hc[chnum].state = HC_STALL;
+  }
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_NAK)
+  {
+    hhcd->hc[chnum].ErrCnt = 0;
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    USB_HC_Halt(hhcd->Instance, chnum);
+    hhcd->hc[chnum].state = HC_NAK;
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+  }
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_TXERR)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    USB_HC_Halt(hhcd->Instance, chnum);
+    hhcd->hc[chnum].state = HC_XACTERR;
+     __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
+  }
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_DTERR)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    USB_HC_Halt(hhcd->Instance, chnum);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
+    hhcd->hc[chnum].state = HC_DATATGLERR;
+  }
+
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_CHH)
+  {
+    __HAL_HCD_MASK_HALT_HC_INT(chnum);
+
+    if(hhcd->hc[chnum].state == HC_XFRC)
+    {
+      hhcd->hc[chnum].urb_state  = URB_DONE;
+      if (hhcd->hc[chnum].ep_type == EP_TYPE_BULK)
+      {
+        hhcd->hc[chnum].toggle_out ^= 1;
+      }
+    }
+    else if (hhcd->hc[chnum].state == HC_NAK)
+    {
+      hhcd->hc[chnum].urb_state  = URB_NOTREADY;
+    }
+
+    else if (hhcd->hc[chnum].state == HC_NYET)
+    {
+      hhcd->hc[chnum].urb_state  = URB_NOTREADY;
+      hhcd->hc[chnum].do_ping = 0;
+    }
+
+    else if (hhcd->hc[chnum].state == HC_STALL)
+    {
+      hhcd->hc[chnum].urb_state  = URB_STALL;
+    }
+
+    else if((hhcd->hc[chnum].state == HC_XACTERR) ||
+            (hhcd->hc[chnum].state == HC_DATATGLERR))
+    {
+      if(hhcd->hc[chnum].ErrCnt++ > 3)
+      {
+        hhcd->hc[chnum].ErrCnt = 0;
+        hhcd->hc[chnum].urb_state = URB_ERROR;
+      }
+      else
+      {
+        hhcd->hc[chnum].urb_state = URB_NOTREADY;
+      }
+
+      /* re-activate the channel  */
+      tmpreg = USBx_HC(chnum)->HCCHAR;
+      tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+      tmpreg |= USB_OTG_HCCHAR_CHENA;
+      USBx_HC(chnum)->HCCHAR = tmpreg;
+    }
+
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
+    HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+  }
+}
+
+/**
+  * @brief  Handle Rx Queue Level interrupt requests.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+  uint8_t  channelnum = 0;
+  uint32_t pktsts;
+  uint32_t pktcnt;
+  uint32_t temp = 0;
+  uint32_t tmpreg = 0;
+
+  temp = hhcd->Instance->GRXSTSP;
+  channelnum = temp &  USB_OTG_GRXSTSP_EPNUM;
+  pktsts = (temp &  USB_OTG_GRXSTSP_PKTSTS) >> 17;
+  pktcnt = (temp &  USB_OTG_GRXSTSP_BCNT) >> 4;
+
+  switch (pktsts)
+  {
+  case GRXSTS_PKTSTS_IN:
+    /* Read the data into the host buffer. */
+    if ((pktcnt > 0) && (hhcd->hc[channelnum].xfer_buff != (void  *)0))
+    {
+
+      USB_ReadPacket(hhcd->Instance, hhcd->hc[channelnum].xfer_buff, pktcnt);
+
+      /*manage multiple Xfer */
+      hhcd->hc[channelnum].xfer_buff += pktcnt;
+      hhcd->hc[channelnum].xfer_count  += pktcnt;
+
+      if((USBx_HC(channelnum)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) > 0)
+      {
+        /* re-activate the channel when more packets are expected */
+        tmpreg = USBx_HC(channelnum)->HCCHAR;
+        tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+        tmpreg |= USB_OTG_HCCHAR_CHENA;
+        USBx_HC(channelnum)->HCCHAR = tmpreg;
+        hhcd->hc[channelnum].toggle_in ^= 1;
+      }
+    }
+    break;
+
+  case GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
+    break;
+  case GRXSTS_PKTSTS_IN_XFER_COMP:
+  case GRXSTS_PKTSTS_CH_HALTED:
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  Handle Host Port interrupt requests.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+static void HCD_Port_IRQHandler  (HCD_HandleTypeDef *hhcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+  __IO uint32_t hprt0, hprt0_dup;
+
+  /* Handle Host Port Interrupts */
+  hprt0 = USBx_HPRT0;
+  hprt0_dup = USBx_HPRT0;
+
+  hprt0_dup &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+                 USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+  /* Check whether Port Connect Detected */
+  if((hprt0 & USB_OTG_HPRT_PCDET) == USB_OTG_HPRT_PCDET)
+  {
+    if((hprt0 & USB_OTG_HPRT_PCSTS) == USB_OTG_HPRT_PCSTS)
+    {
+      USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT);
+      HAL_HCD_Connect_Callback(hhcd);
+    }
+    hprt0_dup  |= USB_OTG_HPRT_PCDET;
+
+  }
+
+  /* Check whether Port Enable Changed */
+  if((hprt0 & USB_OTG_HPRT_PENCHNG) == USB_OTG_HPRT_PENCHNG)
+  {
+    hprt0_dup |= USB_OTG_HPRT_PENCHNG;
+
+    if((hprt0 & USB_OTG_HPRT_PENA) == USB_OTG_HPRT_PENA)
+    {
+      if(hhcd->Init.phy_itface  == USB_OTG_EMBEDDED_PHY)
+      {
+        if ((hprt0 & USB_OTG_HPRT_PSPD) == (HPRT0_PRTSPD_LOW_SPEED << 17))
+        {
+          USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_6_MHZ );
+        }
+        else
+        {
+          USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
+        }
+      }
+      else
+      {
+        if(hhcd->Init.speed == HCD_SPEED_FULL)
+        {
+          USBx_HOST->HFIR = (uint32_t)60000;
+        }
+      }
+      HAL_HCD_Connect_Callback(hhcd);
+
+      if(hhcd->Init.speed == HCD_SPEED_HIGH)
+      {
+        USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT);
+      }
+    }
+    else
+    {
+      /* Cleanup HPRT */
+      USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+        USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+      USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT);
+    }
+  }
+
+  /* Check for an overcurrent */
+  if((hprt0 & USB_OTG_HPRT_POCCHNG) == USB_OTG_HPRT_POCCHNG)
+  {
+    hprt0_dup |= USB_OTG_HPRT_POCCHNG;
+  }
+
+  /* Clear Port Interrupts */
+  USBx_HPRT0 = hprt0_dup;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_HCD_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c
new file mode 100644
index 0000000..f7ab5ed
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c
@@ -0,0 +1,3649 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_i2c.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   I2C HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Inter Integrated Circuit (I2C) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    The I2C HAL driver can be used as follows:
+
+    (#) Declare a I2C_HandleTypeDef handle structure, for example:
+        I2C_HandleTypeDef  hi2c;
+
+    (#)Initialize the I2C low level resources by implement the HAL_I2C_MspInit() API:
+        (##) Enable the I2Cx interface clock
+        (##) I2C pins configuration
+            (+++) Enable the clock for the I2C GPIOs
+            (+++) Configure I2C pins as alternate function open-drain
+        (##) NVIC configuration if you need to use interrupt process
+            (+++) Configure the I2Cx interrupt priority
+            (+++) Enable the NVIC I2C IRQ Channel
+        (##) DMA Configuration if you need to use DMA process
+            (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
+            (+++) Enable the DMAx interface clock using
+            (+++) Configure the DMA handle parameters
+            (+++) Configure the DMA Tx or Rx Stream
+            (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on
+                  the DMA Tx or Rx Stream
+
+    (#) Configure the Communication Speed, Duty cycle, Addressing mode, Own Address1,
+        Dual Addressing mode, Own Address2, General call and Nostretch mode in the hi2c Init structure.
+
+    (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware
+        (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API.
+
+    (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady()
+
+    (#) For I2C IO and IO MEM operations, three operation modes are available within this driver :
+
+    *** Polling mode IO operation ***
+    =================================
+    [..]
+      (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit()
+      (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive()
+      (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit()
+      (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive()
+
+    *** Polling mode IO MEM operation ***
+    =====================================
+    [..]
+      (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write()
+      (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read()
+
+
+    *** Interrupt mode IO operation ***
+    ===================================
+    [..]
+      (+) Transmit in master mode an amount of data in non blocking mode using HAL_I2C_Master_Transmit_IT()
+      (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback
+      (+) Receive in master mode an amount of data in non blocking mode using HAL_I2C_Master_Receive_IT()
+      (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback
+      (+) Transmit in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Transmit_IT()
+      (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback
+      (+) Receive in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Receive_IT()
+      (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback
+      (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+    *** Interrupt mode IO MEM operation ***
+    =======================================
+    [..]
+      (+) Write an amount of data in no-blocking mode with Interrupt to a specific memory address using
+          HAL_I2C_Mem_Write_IT()
+      (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback
+      (+) Read an amount of data in no-blocking mode with Interrupt from a specific memory address using
+          HAL_I2C_Mem_Read_IT()
+      (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback
+      (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+    *** DMA mode IO operation ***
+    ==============================
+    [..]
+      (+) Transmit in master mode an amount of data in non blocking mode (DMA) using
+          HAL_I2C_Master_Transmit_DMA()
+      (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback
+      (+) Receive in master mode an amount of data in non blocking mode (DMA) using
+          HAL_I2C_Master_Receive_DMA()
+      (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback
+      (+) Transmit in slave mode an amount of data in non blocking mode (DMA) using
+          HAL_I2C_Slave_Transmit_DMA()
+      (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback
+      (+) Receive in slave mode an amount of data in non blocking mode (DMA) using
+          HAL_I2C_Slave_Receive_DMA()
+      (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback
+      (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+    *** DMA mode IO MEM operation ***
+    =================================
+    [..]
+      (+) Write an amount of data in no-blocking mode with DMA to a specific memory address using
+          HAL_I2C_Mem_Write_DMA()
+      (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback
+      (+) Read an amount of data in no-blocking mode with DMA from a specific memory address using
+          HAL_I2C_Mem_Read_DMA()
+      (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback
+      (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+
+     *** I2C HAL driver macros list ***
+     ==================================
+     [..]
+       Below the list of most used macros in I2C HAL driver.
+
+      (+) __HAL_I2C_ENABLE: Enable the I2C peripheral
+      (+) __HAL_I2C_DISABLE: Disable the I2C peripheral
+      (+) __HAL_I2C_GET_FLAG : Checks whether the specified I2C flag is set or not
+      (+) __HAL_I2C_CLEAR_FLAG : Clear the specified I2C pending flag
+      (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt
+      (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt
+
+     [..]
+       (@) You can refer to the I2C HAL driver header file for more useful macros
+
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup I2C I2C
+  * @brief I2C HAL module driver
+  * @{
+  */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup I2C_Private_Constants
+  * @{
+  */
+#define I2C_TIMEOUT_FLAG          ((uint32_t)35)     /* 35 ms */
+#define I2C_TIMEOUT_ADDR_SLAVE    ((uint32_t)10000)  /* 10 s  */
+#define I2C_TIMEOUT_BUSY_FLAG     ((uint32_t)10000)  /* 10 s  */
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup I2C_Private_Functions
+  * @{
+  */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAError(DMA_HandleTypeDef *hdma);
+
+static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout);
+
+static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c);
+
+static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2C_Exported_Functions I2C Exported Functions
+  * @{
+  */
+
+/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and
+          de-initialize the I2Cx peripheral:
+
+      (+) User must Implement HAL_I2C_MspInit() function in which he configures
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC).
+
+      (+) Call the function HAL_I2C_Init() to configure the selected device with
+          the selected configuration:
+        (++) Communication Speed
+        (++) Duty cycle
+        (++) Addressing mode
+        (++) Own Address 1
+        (++) Dual Addressing mode
+        (++) Own Address 2
+        (++) General call mode
+        (++) Nostretch mode
+
+      (+) Call the function HAL_I2C_DeInit() to restore the default configuration
+          of the selected I2Cx peripheral.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the I2C according to the specified parameters
+  *         in the I2C_InitTypeDef and create the associated handle.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c)
+{
+  uint32_t freqrange = 0;
+  uint32_t pclk1 = 0;
+
+  /* Check the I2C handle allocation */
+  if(hi2c == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_I2C_CLOCK_SPEED(hi2c->Init.ClockSpeed));
+  assert_param(IS_I2C_DUTY_CYCLE(hi2c->Init.DutyCycle));
+  assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1));
+  assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode));
+  assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode));
+  assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2));
+  assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode));
+  assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode));
+
+  if(hi2c->State == HAL_I2C_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hi2c->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, NVIC */
+    HAL_I2C_MspInit(hi2c);
+  }
+
+  hi2c->State = HAL_I2C_STATE_BUSY;
+
+  /* Disable the selected I2C peripheral */
+  __HAL_I2C_DISABLE(hi2c);
+
+  /* Get PCLK1 frequency */
+  pclk1 = HAL_RCC_GetPCLK1Freq();
+
+  /* Calculate frequency range */
+  freqrange = I2C_FREQRANGE(pclk1);
+
+  /*---------------------------- I2Cx CR2 Configuration ----------------------*/
+  /* Configure I2Cx: Frequency range */
+  hi2c->Instance->CR2 = freqrange;
+
+  /*---------------------------- I2Cx TRISE Configuration --------------------*/
+  /* Configure I2Cx: Rise Time */
+  hi2c->Instance->TRISE = I2C_RISE_TIME(freqrange, hi2c->Init.ClockSpeed);
+
+  /*---------------------------- I2Cx CCR Configuration ----------------------*/
+  /* Configure I2Cx: Speed */
+  hi2c->Instance->CCR = I2C_SPEED(pclk1, hi2c->Init.ClockSpeed, hi2c->Init.DutyCycle);
+
+  /*---------------------------- I2Cx CR1 Configuration ----------------------*/
+  /* Configure I2Cx: Generalcall and NoStretch mode */
+  hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode);
+
+  /*---------------------------- I2Cx OAR1 Configuration ---------------------*/
+  /* Configure I2Cx: Own Address1 and addressing mode */
+  hi2c->Instance->OAR1 = (hi2c->Init.AddressingMode | hi2c->Init.OwnAddress1);
+
+  /*---------------------------- I2Cx OAR2 Configuration ---------------------*/
+  /* Configure I2Cx: Dual mode and Own Address2 */
+  hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2);
+
+  /* Enable the selected I2C peripheral */
+  __HAL_I2C_ENABLE(hi2c);
+
+  hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+  hi2c->State = HAL_I2C_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the I2C peripheral.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c)
+{
+  /* Check the I2C handle allocation */
+  if(hi2c == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+
+  hi2c->State = HAL_I2C_STATE_BUSY;
+
+  /* Disable the I2C Peripheral Clock */
+  __HAL_I2C_DISABLE(hi2c);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_I2C_MspDeInit(hi2c);
+
+  hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+  hi2c->State = HAL_I2C_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief I2C MSP Init.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval None
+  */
+ __weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief I2C MSP DeInit
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval None
+  */
+ __weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Exported_Functions_Group2 IO operation functions
+ *  @brief   Data transfers functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the I2C data
+    transfers.
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode : The communication is performed in the polling mode.
+            The status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode : The communication is performed using Interrupts
+            or DMA. These functions return the status of the transfer startup.
+            The end of the data processing will be indicated through the
+            dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when
+            using DMA mode.
+
+    (#) Blocking mode functions are :
+        (++) HAL_I2C_Master_Transmit()
+        (++) HAL_I2C_Master_Receive()
+        (++) HAL_I2C_Slave_Transmit()
+        (++) HAL_I2C_Slave_Receive()
+        (++) HAL_I2C_Mem_Write()
+        (++) HAL_I2C_Mem_Read()
+        (++) HAL_I2C_IsDeviceReady()
+
+    (#) No-Blocking mode functions with Interrupt are :
+        (++) HAL_I2C_Master_Transmit_IT()
+        (++) HAL_I2C_Master_Receive_IT()
+        (++) HAL_I2C_Slave_Transmit_IT()
+        (++) HAL_I2C_Slave_Receive_IT()
+        (++) HAL_I2C_Mem_Write_IT()
+        (++) HAL_I2C_Mem_Read_IT()
+
+    (#) No-Blocking mode functions with DMA are :
+        (++) HAL_I2C_Master_Transmit_DMA()
+        (++) HAL_I2C_Master_Receive_DMA()
+        (++) HAL_I2C_Slave_Transmit_DMA()
+        (++) HAL_I2C_Slave_Receive_DMA()
+        (++) HAL_I2C_Mem_Write_DMA()
+        (++) HAL_I2C_Mem_Read_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_I2C_MemTxCpltCallback()
+        (++) HAL_I2C_MemRxCpltCallback()
+        (++) HAL_I2C_MasterTxCpltCallback()
+        (++) HAL_I2C_MasterRxCpltCallback()
+        (++) HAL_I2C_SlaveTxCpltCallback()
+        (++) HAL_I2C_SlaveRxCpltCallback()
+        (++) HAL_I2C_ErrorCallback()
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Transmits in master mode an amount of data in blocking mode.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY_TX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Send Slave Address */
+    if(I2C_MasterRequestWrite(hi2c, DevAddress, Timeout) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+    while(Size > 0)
+    {
+      /* Wait until TXE flag is set */
+      if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      /* Write data to DR */
+      hi2c->Instance->DR = (*pData++);
+      Size--;
+
+      if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0))
+      {
+        /* Write data to DR */
+        hi2c->Instance->DR = (*pData++);
+        Size--;
+      }
+    }
+
+    /* Wait until TXE flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Generate Stop */
+    hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives in master mode an amount of data in blocking mode.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY_RX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Send Slave Address */
+    if(I2C_MasterRequestRead(hi2c, DevAddress, Timeout) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    if(Size == 1)
+    {
+      /* Disable Acknowledge */
+      hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+      /* Generate Stop */
+      hi2c->Instance->CR1 |= I2C_CR1_STOP;
+    }
+    else if(Size == 2)
+    {
+      /* Disable Acknowledge */
+      hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+      /* Enable Pos */
+      hi2c->Instance->CR1 |= I2C_CR1_POS;
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+    }
+    else
+    {
+      /* Enable Acknowledge */
+      hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+    }
+
+    while(Size > 0)
+    {
+      if(Size <= 3)
+      {
+        /* One byte */
+        if(Size == 1)
+        {
+          /* Wait until RXNE flag is set */
+          if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+        }
+        /* Two bytes */
+        else if(Size == 2)
+        {
+          /* Wait until BTF flag is set */
+          if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          /* Generate Stop */
+          hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+        }
+        /* 3 Last bytes */
+        else
+        {
+          /* Wait until BTF flag is set */
+          if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          /* Disable Acknowledge */
+          hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+
+          /* Wait until BTF flag is set */
+          if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          /* Generate Stop */
+          hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+        }
+      }
+      else
+      {
+        /* Wait until RXNE flag is set */
+        if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        /* Read data from DR */
+        (*pData++) = hi2c->Instance->DR;
+        Size--;
+
+        if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET)
+        {
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+        }
+      }
+    }
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmits in slave mode an amount of data in blocking mode.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY_TX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+    /* Wait until ADDR flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+    /* If 10bit addressing mode is selected */
+    if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+    {
+      /* Wait until ADDR flag is set */
+      if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+    }
+
+    while(Size > 0)
+    {
+      /* Wait until TXE flag is set */
+      if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      /* Write data to DR */
+      hi2c->Instance->DR = (*pData++);
+      Size--;
+
+      if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0))
+      {
+        /* Write data to DR */
+        hi2c->Instance->DR = (*pData++);
+        Size--;
+      }
+    }
+
+    /* Wait until AF flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Clear AF flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+    /* Disable Address Acknowledge */
+    hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in slave mode an amount of data in blocking mode
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY_RX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+    /* Wait until ADDR flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+    while(Size > 0)
+    {
+      /* Wait until RXNE flag is set */
+      if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      /* Read data from DR */
+      (*pData++) = hi2c->Instance->DR;
+      Size--;
+
+      if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0))
+      {
+        /* Read data from DR */
+        (*pData++) = hi2c->Instance->DR;
+        Size--;
+      }
+    }
+
+    /* Wait until STOP flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Clear STOP flag */
+    __HAL_I2C_CLEAR_STOPFLAG(hi2c);
+
+    /* Disable Address Acknowledge */
+    hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in master mode an amount of data in no-blocking mode with Interrupt
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY_TX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+
+    /* Send Slave Address */
+    if(I2C_MasterRequestWrite(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable EVT, BUF and ERR interrupt */
+    __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in master mode an amount of data in no-blocking mode with Interrupt
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY_RX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+
+    /* Send Slave Address */
+    if(I2C_MasterRequestRead(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    if(hi2c->XferCount == 1)
+    {
+      /* Disable Acknowledge */
+      hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+      /* Generate Stop */
+      hi2c->Instance->CR1 |= I2C_CR1_STOP;
+    }
+    else if(hi2c->XferCount == 2)
+    {
+      /* Disable Acknowledge */
+      hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+      /* Enable Pos */
+      hi2c->Instance->CR1 |= I2C_CR1_POS;
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+    }
+    else
+    {
+      /* Enable Acknowledge */
+      hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable EVT, BUF and ERR interrupt */
+    __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in slave mode an amount of data in no-blocking mode with Interrupt
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY_TX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable EVT, BUF and ERR interrupt */
+    __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in slave mode an amount of data in no-blocking mode with Interrupt
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY_RX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable EVT, BUF and ERR interrupt */
+    __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in master mode an amount of data in no-blocking mode with DMA
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY_TX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+
+    /* Set the I2C DMA transfer complete callback */
+    hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+    /* Set the DMA error callback */
+    hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size);
+
+    /* Send Slave Address */
+    if(I2C_MasterRequestWrite(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Enable DMA Request */
+    hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in master mode an amount of data in no-blocking mode with DMA
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY_RX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+
+    /* Set the I2C DMA transfer complete callback */
+    hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+    /* Set the DMA error callback */
+    hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size);
+
+    /* Send Slave Address */
+    if(I2C_MasterRequestRead(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    if(Size == 1)
+    {
+      /* Disable Acknowledge */
+      hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+    }
+    else
+    {
+      /* Enable Last DMA bit */
+      hi2c->Instance->CR2 |= I2C_CR2_LAST;
+    }
+
+    /* Enable DMA Request */
+    hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in slave mode an amount of data in no-blocking mode with DMA
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY_TX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+
+    /* Set the I2C DMA transfer complete callback */
+    hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
+
+    /* Set the DMA error callback */
+    hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size);
+
+    /* Enable DMA Request */
+    hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+    /* Wait until ADDR flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR_SLAVE) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* If 7bit addressing mode is selected */
+    if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+    {
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+    }
+    else
+    {
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+      /* Wait until ADDR flag is set */
+      if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR_SLAVE) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in slave mode an amount of data in no-blocking mode with DMA
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY_RX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+
+    /* Set the I2C DMA transfer complete callback */
+    hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt;
+
+    /* Set the DMA error callback */
+    hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size);
+
+    /* Enable DMA Request */
+    hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+    /* Wait until ADDR flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR_SLAVE) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief  Write an amount of data in blocking mode to a specific memory address
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Send Slave Address and Memory Address */
+    if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    while(Size > 0)
+    {
+      /* Wait until TXE flag is set */
+      if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      /* Write data to DR */
+      hi2c->Instance->DR = (*pData++);
+      Size--;
+
+      if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0))
+      {
+        /* Write data to DR */
+        hi2c->Instance->DR = (*pData++);
+        Size--;
+      }
+    }
+
+    /* Wait until TXE flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Generate Stop */
+    hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Read an amount of data in blocking mode from a specific memory address
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    /* Send Slave Address and Memory Address */
+    if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    if(Size == 1)
+    {
+      /* Disable Acknowledge */
+      hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+      /* Generate Stop */
+      hi2c->Instance->CR1 |= I2C_CR1_STOP;
+    }
+    else if(Size == 2)
+    {
+      /* Disable Acknowledge */
+      hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+      /* Enable Pos */
+      hi2c->Instance->CR1 |= I2C_CR1_POS;
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+    }
+    else
+    {
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+    }
+
+    while(Size > 0)
+    {
+      if(Size <= 3)
+      {
+        /* One byte */
+        if(Size== 1)
+        {
+          /* Wait until RXNE flag is set */
+          if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+        }
+        /* Two bytes */
+        else if(Size == 2)
+        {
+          /* Wait until BTF flag is set */
+          if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          /* Generate Stop */
+          hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+        }
+        /* 3 Last bytes */
+        else
+        {
+          /* Wait until BTF flag is set */
+          if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          /* Disable Acknowledge */
+          hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+
+          /* Wait until BTF flag is set */
+          if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          /* Generate Stop */
+          hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+        }
+      }
+      else
+      {
+        /* Wait until RXNE flag is set */
+        if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        /* Read data from DR */
+        (*pData++) = hi2c->Instance->DR;
+        Size--;
+
+        if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET)
+        {
+          /* Read data from DR */
+          (*pData++) = hi2c->Instance->DR;
+          Size--;
+        }
+      }
+    }
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief  Write an amount of data in no-blocking mode with Interrupt to a specific memory address
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+
+    /* Send Slave Address and Memory Address */
+    if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable EVT, BUF and ERR interrupt */
+    __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Read an amount of data in no-blocking mode with Interrupt from a specific memory address
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+
+    /* Send Slave Address and Memory Address */
+    if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    if(hi2c->XferCount == 1)
+    {
+      /* Disable Acknowledge */
+      hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+      /* Generate Stop */
+      hi2c->Instance->CR1 |= I2C_CR1_STOP;
+    }
+    else if(hi2c->XferCount == 2)
+    {
+      /* Disable Acknowledge */
+      hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+      /* Enable Pos */
+      hi2c->Instance->CR1 |= I2C_CR1_POS;
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+    }
+    else
+    {
+      /* Enable Acknowledge */
+      hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    /* Note : The I2C interrupts must be enabled after unlocking current process
+              to avoid the risk of I2C interrupt handle execution before current
+              process unlock */
+
+    /* Enable EVT, BUF and ERR interrupt */
+    __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief  Write an amount of data in no-blocking mode with DMA to a specific memory address
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+
+    /* Set the I2C DMA transfer complete callback */
+    hi2c->hdmatx->XferCpltCallback = I2C_DMAMemTransmitCplt;
+
+    /* Set the DMA error callback */
+    hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size);
+
+    /* Send Slave Address and Memory Address */
+    if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Enable DMA Request */
+    hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Reads an amount of data in no-blocking mode with DMA from a specific memory address.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be read
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+
+    /* Set the I2C DMA transfer complete callback */
+    hi2c->hdmarx->XferCpltCallback = I2C_DMAMemReceiveCplt;
+
+    /* Set the DMA error callback */
+    hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size);
+
+    /* Send Slave Address and Memory Address */
+    if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+
+    if(Size == 1)
+    {
+      /* Disable Acknowledge */
+      hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+    }
+    else
+    {
+      /* Enable Last DMA bit */
+      hi2c->Instance->CR2 |= I2C_CR2_LAST;
+    }
+
+    /* Enable DMA Request */
+    hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
+
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Checks if target device is ready for communication.
+  * @note   This function is used with Memory devices
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  Trials: Number of trials
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+  uint32_t tickstart = 0, tmp1 = 0, tmp2 = 0, tmp3 = 0, I2C_Trials = 1;
+
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Wait until BUSY flag is reset */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+    {
+      return HAL_BUSY;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    /* Disable Pos */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    hi2c->State = HAL_I2C_STATE_BUSY;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+    do
+    {
+      /* Generate Start */
+      hi2c->Instance->CR1 |= I2C_CR1_START;
+
+      /* Wait until SB flag is set */
+      if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      /* Send slave address */
+      hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
+
+      /* Wait until ADDR or AF flag are set */
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
+      tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
+      tmp3 = hi2c->State;
+      while((tmp1 == RESET) && (tmp2 == RESET) && (tmp3 != HAL_I2C_STATE_TIMEOUT))
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          hi2c->State = HAL_I2C_STATE_TIMEOUT;
+        }
+        tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
+        tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
+        tmp3 = hi2c->State;
+      }
+
+      hi2c->State = HAL_I2C_STATE_READY;
+
+      /* Check if the ADDR flag has been set */
+      if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET)
+      {
+        /* Generate Stop */
+        hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+        /* Clear ADDR Flag */
+        __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+        /* Wait until BUSY flag is reset */
+        if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        hi2c->State = HAL_I2C_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_OK;
+      }
+      else
+      {
+        /* Generate Stop */
+        hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+        /* Clear AF Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+        /* Wait until BUSY flag is reset */
+        if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+      }
+    }while(I2C_Trials++ < Trials);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_ERROR;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  This function handles I2C event interrupt request.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+  uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0, tmp4 = 0;
+  /* Master mode selected */
+  if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_MSL) == SET)
+  {
+    /* I2C in mode Transmitter -----------------------------------------------*/
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TRA) == SET)
+    {
+      tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE);
+      tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF);
+      tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF);
+      tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT);
+      /* TXE set and BTF reset -----------------------------------------------*/
+      if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET))
+      {
+        I2C_MasterTransmit_TXE(hi2c);
+      }
+      /* BTF set -------------------------------------------------------------*/
+      else if((tmp3 == SET) && (tmp4 == SET))
+      {
+        I2C_MasterTransmit_BTF(hi2c);
+      }
+    }
+    /* I2C in mode Receiver --------------------------------------------------*/
+    else
+    {
+      tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE);
+      tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF);
+      tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF);
+      tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT);
+      /* RXNE set and BTF reset -----------------------------------------------*/
+      if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET))
+      {
+        I2C_MasterReceive_RXNE(hi2c);
+      }
+      /* BTF set -------------------------------------------------------------*/
+      else if((tmp3 == SET) && (tmp4 == SET))
+      {
+        I2C_MasterReceive_BTF(hi2c);
+      }
+    }
+  }
+  /* Slave mode selected */
+  else
+  {
+    tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
+    tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, (I2C_IT_EVT));
+    tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF);
+    tmp4 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TRA);
+    /* ADDR set --------------------------------------------------------------*/
+    if((tmp1 == SET) && (tmp2 == SET))
+    {
+      I2C_Slave_ADDR(hi2c);
+    }
+    /* STOPF set --------------------------------------------------------------*/
+    else if((tmp3 == SET) && (tmp2 == SET))
+    {
+      I2C_Slave_STOPF(hi2c);
+    }
+    /* I2C in mode Transmitter -----------------------------------------------*/
+    else if(tmp4 == SET)
+    {
+      tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE);
+      tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF);
+      tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF);
+      tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT);
+      /* TXE set and BTF reset -----------------------------------------------*/
+      if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET))
+      {
+        I2C_SlaveTransmit_TXE(hi2c);
+      }
+      /* BTF set -------------------------------------------------------------*/
+      else if((tmp3 == SET) && (tmp4 == SET))
+      {
+        I2C_SlaveTransmit_BTF(hi2c);
+      }
+    }
+    /* I2C in mode Receiver --------------------------------------------------*/
+    else
+    {
+      tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE);
+      tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF);
+      tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF);
+      tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT);
+      /* RXNE set and BTF reset ----------------------------------------------*/
+      if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET))
+      {
+        I2C_SlaveReceive_RXNE(hi2c);
+      }
+      /* BTF set -------------------------------------------------------------*/
+      else if((tmp3 == SET) && (tmp4 == SET))
+      {
+        I2C_SlaveReceive_BTF(hi2c);
+      }
+    }
+  }
+}
+
+/**
+  * @brief  This function handles I2C error interrupt request.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+  uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0;
+
+  tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BERR);
+  tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR);
+  /* I2C Bus error interrupt occurred ----------------------------------------*/
+  if((tmp1 == SET) && (tmp2 == SET))
+  {
+    hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
+
+    /* Clear BERR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR);
+  }
+
+  tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ARLO);
+  tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR);
+  /* I2C Arbitration Loss error interrupt occurred ---------------------------*/
+  if((tmp1 == SET) && (tmp2 == SET))
+  {
+    hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
+
+    /* Clear ARLO flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO);
+  }
+
+  tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
+  tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR);
+  /* I2C Acknowledge failure error interrupt occurred ------------------------*/
+  if((tmp1 == SET) && (tmp2 == SET))
+  {
+    tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_MSL);
+    tmp2 = hi2c->XferCount;
+    tmp3 = hi2c->State;
+    if((tmp1 == RESET) && (tmp2 == 0) && (tmp3 == HAL_I2C_STATE_BUSY_TX))
+    {
+      I2C_Slave_AF(hi2c);
+    }
+    else
+    {
+      hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+      /* Clear AF flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+    }
+  }
+
+  tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_OVR);
+  tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR);
+  /* I2C Over-Run/Under-Run interrupt occurred -------------------------------*/
+  if((tmp1 == SET) && (tmp2 == SET))
+  {
+    hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
+    /* Clear OVR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR);
+  }
+
+  if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+  {
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Disable Pos bit in I2C CR1 when error occurred in Master/Mem Receive IT Process */
+    hi2c->Instance->CR1 &= ~I2C_CR1_POS;
+
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+}
+
+/**
+  * @brief  Master Tx Transfer completed callbacks.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval None
+  */
+ __weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Master Rx Transfer completed callbacks.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval None
+  */
+__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/** @brief  Slave Tx Transfer completed callbacks.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval None
+  */
+ __weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Slave Rx Transfer completed callbacks.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval None
+  */
+__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Memory Tx Transfer completed callbacks.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval None
+  */
+ __weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Memory Rx Transfer completed callbacks.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval None
+  */
+__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  I2C error callbacks.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval None
+  */
+ __weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Exported_Functions_Group3 Peripheral State and Errors functions
+ *  @brief   Peripheral State and Errors functions
+ *
+ at verbatim
+ ===============================================================================
+            ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the I2C state.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL state
+  */
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c)
+{
+  return hi2c->State;
+}
+
+/**
+  * @brief  Return the I2C error code
+  * @param  hi2c : pointer to a I2C_HandleTypeDef structure that contains
+  *              the configuration information for the specified I2C.
+* @retval I2C Error Code
+*/
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
+{
+  return hi2c->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  Handle TXE flag for Master
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c)
+{
+  /* Write data to DR */
+  hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+  hi2c->XferCount--;
+
+  if(hi2c->XferCount == 0)
+  {
+    /* Disable BUF interrupt */
+    __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle BTF flag for Master transmitter
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c)
+{
+  if(hi2c->XferCount != 0)
+  {
+    /* Write data to DR */
+    hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+    hi2c->XferCount--;
+  }
+  else
+  {
+    /* Disable EVT, BUF and ERR interrupt */
+    __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+    /* Generate Stop */
+    hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+    if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_TX)
+    {
+      hi2c->State = HAL_I2C_STATE_READY;
+
+      HAL_I2C_MemTxCpltCallback(hi2c);
+    }
+    else
+    {
+      hi2c->State = HAL_I2C_STATE_READY;
+
+      HAL_I2C_MasterTxCpltCallback(hi2c);
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle RXNE flag for Master
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c)
+{
+  uint32_t tmp = 0;
+
+  tmp = hi2c->XferCount;
+  if(tmp > 3)
+  {
+    /* Read data from DR */
+    (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+    hi2c->XferCount--;
+  }
+  else if((tmp == 2) || (tmp == 3))
+  {
+    /* Disable BUF interrupt */
+    __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF);
+  }
+  else
+  {
+    /* Disable EVT, BUF and ERR interrupt */
+    __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+    /* Read data from DR */
+    (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+    hi2c->XferCount--;
+
+    if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX)
+    {
+      hi2c->State = HAL_I2C_STATE_READY;
+
+      HAL_I2C_MemRxCpltCallback(hi2c);
+    }
+    else
+    {
+      hi2c->State = HAL_I2C_STATE_READY;
+
+      HAL_I2C_MasterRxCpltCallback(hi2c);
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle BTF flag for Master receiver
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c)
+{
+  if(hi2c->XferCount == 3)
+  {
+    /* Disable Acknowledge */
+    hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+    /* Read data from DR */
+    (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+    hi2c->XferCount--;
+  }
+  else if(hi2c->XferCount == 2)
+  {
+    /* Generate Stop */
+    hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+    /* Read data from DR */
+    (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+    hi2c->XferCount--;
+
+    /* Read data from DR */
+    (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+    hi2c->XferCount--;
+
+    /* Disable EVT and ERR interrupt */
+    __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR);
+
+    if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX)
+    {
+      hi2c->State = HAL_I2C_STATE_READY;
+
+      HAL_I2C_MemRxCpltCallback(hi2c);
+    }
+    else
+    {
+      hi2c->State = HAL_I2C_STATE_READY;
+
+      HAL_I2C_MasterRxCpltCallback(hi2c);
+    }
+  }
+  else
+  {
+    /* Read data from DR */
+    (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+    hi2c->XferCount--;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle TXE flag for Slave
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c)
+{
+  if(hi2c->XferCount != 0)
+  {
+    /* Write data to DR */
+    hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+    hi2c->XferCount--;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle BTF flag for Slave transmitter
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c)
+{
+  if(hi2c->XferCount != 0)
+  {
+    /* Write data to DR */
+    hi2c->Instance->DR = (*hi2c->pBuffPtr++);
+    hi2c->XferCount--;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle RXNE flag for Slave
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c)
+{
+  if(hi2c->XferCount != 0)
+  {
+    /* Read data from DR */
+    (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+    hi2c->XferCount--;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle BTF flag for Slave receiver
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c)
+{
+  if(hi2c->XferCount != 0)
+  {
+    /* Read data from DR */
+    (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
+    hi2c->XferCount--;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle ADD flag for Slave
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c)
+{
+  /* Clear ADDR flag */
+  __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle STOPF flag for Slave
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c)
+{
+  /* Disable EVT, BUF and ERR interrupt */
+  __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+  /* Clear STOPF flag */
+  __HAL_I2C_CLEAR_STOPFLAG(hi2c);
+
+  /* Disable Acknowledge */
+  hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+  hi2c->State = HAL_I2C_STATE_READY;
+
+  HAL_I2C_SlaveRxCpltCallback(hi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c)
+{
+  /* Disable EVT, BUF and ERR interrupt */
+  __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+  /* Clear AF flag */
+  __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+  /* Disable Acknowledge */
+  hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+  hi2c->State = HAL_I2C_STATE_READY;
+
+  HAL_I2C_SlaveTxCpltCallback(hi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout)
+{
+  /* Generate Start */
+  hi2c->Instance->CR1 |= I2C_CR1_START;
+
+  /* Wait until SB flag is set */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+  {
+    /* Send slave address */
+    hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
+  }
+  else
+  {
+    /* Send header of slave address */
+    hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress);
+
+    /* Wait until ADD10 flag is set */
+    if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Send slave address */
+    hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress);
+  }
+
+  /* Wait until ADDR flag is set */
+  if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK)
+  {
+    if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Master sends target device address for read request.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout)
+{
+  /* Enable Acknowledge */
+  hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+  /* Generate Start */
+  hi2c->Instance->CR1 |= I2C_CR1_START;
+
+  /* Wait until SB flag is set */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+  {
+    /* Send slave address */
+    hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress);
+  }
+  else
+  {
+    /* Send header of slave address */
+    hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress);
+
+    /* Wait until ADD10 flag is set */
+    if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Send slave address */
+    hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress);
+
+    /* Wait until ADDR flag is set */
+    if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+    /* Generate Restart */
+    hi2c->Instance->CR1 |= I2C_CR1_START;
+
+    /* Wait until SB flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Send header of slave address */
+    hi2c->Instance->DR = I2C_10BIT_HEADER_READ(DevAddress);
+  }
+
+  /* Wait until ADDR flag is set */
+  if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK)
+  {
+    if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Master sends target device address followed by internal memory address for write request.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout)
+{
+  /* Generate Start */
+  hi2c->Instance->CR1 |= I2C_CR1_START;
+
+  /* Wait until SB flag is set */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Send slave address */
+  hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
+
+  /* Wait until ADDR flag is set */
+  if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK)
+  {
+    if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Clear ADDR flag */
+  __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+  /* Wait until TXE flag is set */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* If Memory address size is 8Bit */
+  if(MemAddSize == I2C_MEMADD_SIZE_8BIT)
+  {
+    /* Send Memory Address */
+    hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
+  }
+  /* If Memory address size is 16Bit */
+  else
+  {
+    /* Send MSB of Memory Address */
+    hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress);
+
+    /* Wait until TXE flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Send LSB of Memory Address */
+    hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Master sends target device address followed by internal memory address for read request.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout)
+{
+  /* Enable Acknowledge */
+  hi2c->Instance->CR1 |= I2C_CR1_ACK;
+
+  /* Generate Start */
+  hi2c->Instance->CR1 |= I2C_CR1_START;
+
+  /* Wait until SB flag is set */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Send slave address */
+  hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
+
+  /* Wait until ADDR flag is set */
+  if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK)
+  {
+    if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Clear ADDR flag */
+  __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
+
+  /* Wait until TXE flag is set */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* If Memory address size is 8Bit */
+  if(MemAddSize == I2C_MEMADD_SIZE_8BIT)
+  {
+    /* Send Memory Address */
+    hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
+  }
+  /* If Memory address size is 16Bit */
+  else
+  {
+    /* Send MSB of Memory Address */
+    hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress);
+
+    /* Wait until TXE flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Send LSB of Memory Address */
+    hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
+  }
+
+  /* Wait until TXE flag is set */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Generate Restart */
+  hi2c->Instance->CR1 |= I2C_CR1_START;
+
+  /* Wait until SB flag is set */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Send slave address */
+  hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress);
+
+  /* Wait until ADDR flag is set */
+  if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK)
+  {
+    if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DMA I2C master transmit process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Wait until BTF flag is reset */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK)
+  {
+    hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+  }
+
+  /* Generate Stop */
+  hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+  /* Disable DMA Request */
+  hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
+
+  hi2c->XferCount = 0;
+
+  hi2c->State = HAL_I2C_STATE_READY;
+
+  /* Check if Errors has been detected during transfer */
+  if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+  {
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+  else
+  {
+    HAL_I2C_MasterTxCpltCallback(hi2c);
+  }
+}
+
+/**
+  * @brief  DMA I2C slave transmit process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Wait until AF flag is reset */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK)
+  {
+    hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+  }
+
+  /* Clear AF flag */
+  __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+  /* Disable Address Acknowledge */
+  hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+  /* Disable DMA Request */
+  hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
+
+  hi2c->XferCount = 0;
+
+  hi2c->State = HAL_I2C_STATE_READY;
+
+  /* Check if Errors has been detected during transfer */
+  if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+  {
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+  else
+  {
+    HAL_I2C_SlaveTxCpltCallback(hi2c);
+  }
+}
+
+/**
+  * @brief  DMA I2C master receive process complete callback
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Disable Acknowledge */
+  hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+  /* Generate Stop */
+  hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+  /* Disable Last DMA */
+  hi2c->Instance->CR2 &= ~I2C_CR2_LAST;
+
+  /* Disable DMA Request */
+  hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
+
+  hi2c->XferCount = 0;
+
+  hi2c->State = HAL_I2C_STATE_READY;
+
+  /* Check if Errors has been detected during transfer */
+  if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+  {
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+  else
+  {
+    HAL_I2C_MasterRxCpltCallback(hi2c);
+  }
+}
+
+/**
+  * @brief  DMA I2C slave receive process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Wait until STOPF flag is reset */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK)
+  {
+    hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+  }
+
+  /* Clear STOPF flag */
+  __HAL_I2C_CLEAR_STOPFLAG(hi2c);
+
+  /* Disable Address Acknowledge */
+  hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+  /* Disable DMA Request */
+  hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
+
+  hi2c->XferCount = 0;
+
+  hi2c->State = HAL_I2C_STATE_READY;
+
+  /* Check if Errors has been detected during transfer */
+  if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+  {
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+  else
+  {
+    HAL_I2C_SlaveRxCpltCallback(hi2c);
+  }
+}
+
+/**
+  * @brief  DMA I2C Memory Write process complete callback
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void I2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Wait until BTF flag is reset */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK)
+  {
+    hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+  }
+
+  /* Generate Stop */
+  hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+  /* Disable DMA Request */
+  hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
+
+  hi2c->XferCount = 0;
+
+  hi2c->State = HAL_I2C_STATE_READY;
+
+  /* Check if Errors has been detected during transfer */
+  if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+  {
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+  else
+  {
+    HAL_I2C_MemTxCpltCallback(hi2c);
+  }
+}
+
+/**
+  * @brief  DMA I2C Memory Read process complete callback
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void I2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Disable Acknowledge */
+  hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+  /* Generate Stop */
+  hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+  /* Disable Last DMA */
+  hi2c->Instance->CR2 &= ~I2C_CR2_LAST;
+
+  /* Disable DMA Request */
+  hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
+
+  hi2c->XferCount = 0;
+
+  hi2c->State = HAL_I2C_STATE_READY;
+
+  /* Check if Errors has been detected during transfer */
+  if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+  {
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+  else
+  {
+    HAL_I2C_MemRxCpltCallback(hi2c);
+  }
+}
+
+/**
+  * @brief  DMA I2C communication error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void I2C_DMAError(DMA_HandleTypeDef *hdma)
+{
+  I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Disable Acknowledge */
+  hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
+
+  hi2c->XferCount = 0;
+
+  hi2c->State = HAL_I2C_STATE_READY;
+
+  hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+
+  HAL_I2C_ErrorCallback(hi2c);
+}
+
+/**
+  * @brief  This function handles I2C Communication Timeout.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  Flag: specifies the I2C flag to check.
+  * @param  Status: The new Flag status (SET or RESET).
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          hi2c->State= HAL_I2C_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2c);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_I2C_GET_FLAG(hi2c, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          hi2c->State= HAL_I2C_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2c);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles I2C Communication Timeout for Master addressing phase.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *         the configuration information for I2C module
+  * @param  Flag: specifies the I2C flag to check.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET)
+  {
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+    {
+      /* Generate Stop */
+      hi2c->Instance->CR1 |= I2C_CR1_STOP;
+
+      /* Clear AF Flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+      hi2c->ErrorCode = HAL_I2C_ERROR_AF;
+      hi2c->State= HAL_I2C_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+
+      return HAL_ERROR;
+    }
+
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hi2c->State= HAL_I2C_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c
new file mode 100644
index 0000000..f0427b4
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c
@@ -0,0 +1,204 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_i2c_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   I2C Extension HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of I2C extension peripheral:
+  *           + Extension features functions
+  *
+  @verbatim
+  ==============================================================================
+               ##### I2C peripheral extension features  #####
+  ==============================================================================
+
+  [..] Comparing to other previous devices, the I2C interface for STM32F427xx/437xx/
+       429xx/439xx devices contains the following additional features :
+
+       (+) Possibility to disable or enable Analog Noise Filter
+       (+) Use of a configured Digital Noise Filter
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..] This driver provides functions to configure Noise Filter
+    (#) Configure I2C Analog noise filter using the function HAL_I2C_AnalogFilter_Config()
+    (#) Configure I2C Digital noise filter using the function HAL_I2C_DigitalFilter_Config()
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup I2CEx I2CEx
+  * @brief I2C HAL module driver
+  * @{
+  */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2CEx_Exported_Functions I2C Exported Functions
+  * @{
+  */
+
+
+/** @defgroup I2CEx_Exported_Functions_Group1 Extension features functions
+ *  @brief   Extension features functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Extension features functions #####
+ ===============================================================================
+    [..] This section provides functions allowing to:
+      (+) Configure Noise Filters
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configures I2C Analog noise filter.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2Cx peripheral.
+  * @param  AnalogFilter: new state of the Analog filter.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
+{
+  uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
+
+  tmp = hi2c->State;
+  if((tmp == HAL_I2C_STATE_BUSY) || (tmp == HAL_I2C_STATE_BUSY_TX) || (tmp == HAL_I2C_STATE_BUSY_RX))
+  {
+    return HAL_BUSY;
+  }
+
+  hi2c->State = HAL_I2C_STATE_BUSY;
+
+  /* Disable the selected I2C peripheral */
+  __HAL_I2C_DISABLE(hi2c);
+
+  /* Reset I2Cx ANOFF bit */
+  hi2c->Instance->FLTR &= ~(I2C_FLTR_ANOFF);
+
+  /* Disable the analog filter */
+  hi2c->Instance->FLTR |= AnalogFilter;
+
+  __HAL_I2C_ENABLE(hi2c);
+
+  hi2c->State = HAL_I2C_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures I2C Digital noise filter.
+  * @param  hi2c: pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2Cx peripheral.
+  * @param  DigitalFilter: Coefficient of digital noise filter between 0x00 and 0x0F.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
+{
+  uint16_t tmpreg = 0;
+  uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
+
+  tmp = hi2c->State;
+  if((tmp == HAL_I2C_STATE_BUSY) || (tmp == HAL_I2C_STATE_BUSY_TX) || (tmp == HAL_I2C_STATE_BUSY_RX))
+  {
+    return HAL_BUSY;
+  }
+
+  hi2c->State = HAL_I2C_STATE_BUSY;
+
+  /* Disable the selected I2C peripheral */
+  __HAL_I2C_DISABLE(hi2c);
+
+  /* Get the old register value */
+  tmpreg = hi2c->Instance->FLTR;
+
+  /* Reset I2Cx DNF bit [3:0] */
+  tmpreg &= ~(I2C_FLTR_DNF);
+
+  /* Set I2Cx DNF coefficient */
+  tmpreg |= DigitalFilter;
+
+  /* Store the new register value */
+  hi2c->Instance->FLTR = tmpreg;
+
+  __HAL_I2C_ENABLE(hi2c);
+
+  hi2c->State = HAL_I2C_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F446xx */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c
new file mode 100644
index 0000000..63e4288
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c
@@ -0,0 +1,1408 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_i2s.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   I2S HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Integrated Interchip Sound (I2S) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State and Errors functions
+  @verbatim
+ ===============================================================================
+                  ##### How to use this driver #####
+ ===============================================================================
+ [..]
+    The I2S HAL driver can be used as follow:
+
+    (#) Declare a I2S_HandleTypeDef handle structure.
+    (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API:
+        (##) Enable the SPIx interface clock.
+        (##) I2S pins configuration:
+            (+++) Enable the clock for the I2S GPIOs.
+            (+++) Configure these I2S pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT()
+             and HAL_I2S_Receive_IT() APIs).
+            (+++) Configure the I2Sx interrupt priority.
+            (+++) Enable the NVIC I2S IRQ handle.
+        (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA()
+             and HAL_I2S_Receive_DMA() APIs:
+            (+++) Declare a DMA handle structure for the Tx/Rx stream.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+            (+++) Configure the DMA Tx/Rx Stream.
+            (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
+                DMA Tx/Rx Stream.
+
+   (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity
+       using HAL_I2S_Init() function.
+
+   - at - The specific I2S interrupts (Transmission complete interrupt,
+       RXNE interrupt and Error Interrupts) will be managed using the macros
+       __I2S_ENABLE_IT() and __I2S_DISABLE_IT() inside the transmit and receive process.
+   - at - Make sure that either:
+        (+@) I2S PLL is configured or
+        (+@) External clock source is configured after setting correctly
+             the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file.
+
+   (#) Three operation modes are available within this driver :
+
+   *** Polling mode IO operation ***
+   =================================
+   [..]
+     (+) Send an amount of data in blocking mode using HAL_I2S_Transmit()
+     (+) Receive an amount of data in blocking mode using HAL_I2S_Receive()
+
+   *** Interrupt mode IO operation ***
+   ===================================
+   [..]
+     (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT()
+     (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+     (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+     (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT()
+     (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+     (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+     (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+         add his own code by customization of function pointer HAL_I2S_ErrorCallback
+
+   *** DMA mode IO operation ***
+   ==============================
+   [..]
+     (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA()
+     (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+     (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+     (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA()
+     (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+     (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+     (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+         add his own code by customization of function pointer HAL_I2S_ErrorCallback
+     (+) Pause the DMA Transfer using HAL_I2S_DMAPause()
+     (+) Resume the DMA Transfer using HAL_I2S_DMAResume()
+     (+) Stop the DMA Transfer using HAL_I2S_DMAStop()
+
+   *** I2S HAL driver macros list ***
+   =============================================
+   [..]
+     Below the list of most used macros in USART HAL driver.
+
+      (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode)
+      (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode)
+      (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts
+      (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts
+      (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not
+
+    [..]
+      (@) You can refer to the I2S HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup I2S I2S
+  * @brief I2S HAL module driver
+  * @{
+  */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup I2S_Private_Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Functions I2S Exported Functions
+  * @{
+  */
+
+/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and
+          de-initialize the I2Sx peripheral in simplex mode:
+
+      (+) User must Implement HAL_I2S_MspInit() function in which he configures
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+      (+) Call the function HAL_I2S_Init() to configure the selected device with
+          the selected configuration:
+        (++) Mode
+        (++) Standard
+        (++) Data Format
+        (++) MCLK Output
+        (++) Audio frequency
+        (++) Polarity
+
+      (+) Call the function HAL_I2S_DeInit() to restore the default configuration
+          of the selected I2Sx peripheral.
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief Initializes the I2S according to the specified parameters
+  *         in the I2S_InitTypeDef and create the associated handle.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s)
+{
+  uint32_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1;
+  uint32_t tmp = 0, i2sclk = 0;
+
+  /* Check the I2S handle allocation */
+  if(hi2s == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the I2S parameters */
+  assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance));
+  assert_param(IS_I2S_MODE(hi2s->Init.Mode));
+  assert_param(IS_I2S_STANDARD(hi2s->Init.Standard));
+  assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat));
+  assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput));
+  assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq));
+  assert_param(IS_I2S_CPOL(hi2s->Init.CPOL));
+  assert_param(IS_I2S_CLOCKSOURCE(hi2s->Init.ClockSource));
+
+  if(hi2s->State == HAL_I2S_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hi2s->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+    HAL_I2S_MspInit(hi2s);
+  }
+
+  hi2s->State = HAL_I2S_STATE_BUSY;
+
+  /*----------------------- SPIx I2SCFGR & I2SPR Configuration ---------------*/
+  /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+  hi2s->Instance->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
+                               SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
+                               SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
+  hi2s->Instance->I2SPR = 0x0002;
+
+  /* Get the I2SCFGR register value */
+  tmpreg = hi2s->Instance->I2SCFGR;
+
+  /* If the default frequency value has to be written, reinitialize i2sdiv and i2sodd */
+  /* If the requested audio frequency is not the default, compute the prescaler */
+  if(hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT)
+  {
+    /* Check the frame length (For the Prescaler computing) *******************/
+    if(hi2s->Init.DataFormat != I2S_DATAFORMAT_16B)
+    {
+      /* Packet length is 32 bits */
+      packetlength = 2;
+    }
+
+    /* Get I2S source Clock frequency  ****************************************/
+    /* If an external I2S clock has to be used, the specific define should be set
+    in the project configuration or in the stm32f4xx_conf.h file */
+    i2sclk = I2S_GetInputClock(hi2s);
+
+    /* Compute the Real divider depending on the MCLK output state, with a floating point */
+    if(hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE)
+    {
+      /* MCLK output is enabled */
+      tmp = (uint32_t)(((((i2sclk / 256) * 10) / hi2s->Init.AudioFreq)) + 5);
+    }
+    else
+    {
+      /* MCLK output is disabled */
+      tmp = (uint32_t)(((((i2sclk / (32 * packetlength)) *10 ) / hi2s->Init.AudioFreq)) + 5);
+    }
+
+    /* Remove the flatting point */
+    tmp = tmp / 10;
+
+    /* Check the parity of the divider */
+    i2sodd = (uint32_t)(tmp & (uint32_t)1);
+
+    /* Compute the i2sdiv prescaler */
+    i2sdiv = (uint32_t)((tmp - i2sodd) / 2);
+
+    /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+    i2sodd = (uint32_t) (i2sodd << 8);
+  }
+
+  /* Test if the divider is 1 or 0 or greater than 0xFF */
+  if((i2sdiv < 2) || (i2sdiv > 0xFF))
+  {
+    /* Set the default values */
+    i2sdiv = 2;
+    i2sodd = 0;
+  }
+
+  /* Write to SPIx I2SPR register the computed value */
+  hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput));
+
+  /* Configure the I2S with the I2S_InitStruct values */
+  tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
+
+#if defined(SPI_I2SCFGR_ASTRTEN)
+  if (hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT)
+  {
+  /* Write to SPIx I2SCFGR */
+  hi2s->Instance->I2SCFGR = tmpreg | SPI_I2SCFGR_ASTRTEN;
+  }
+  else
+  {
+  /* Write to SPIx I2SCFGR */
+  hi2s->Instance->I2SCFGR = tmpreg;
+  }
+#else
+  /* Write to SPIx I2SCFGR */
+  hi2s->Instance->I2SCFGR = tmpreg;
+#endif
+
+  hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+  hi2s->State= HAL_I2S_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief DeInitializes the I2S peripheral
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s)
+{
+  /* Check the I2S handle allocation */
+  if(hi2s == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  hi2s->State = HAL_I2S_STATE_BUSY;
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+  HAL_I2S_MspDeInit(hi2s);
+
+  hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+  hi2s->State = HAL_I2S_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hi2s);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief I2S MSP Init
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief I2S MSP DeInit
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_MspDeInit could be implemented in the user file
+   */
+}
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Exported_Functions_Group2 IO operation functions
+ *  @brief    Data transfers functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the I2S data
+    transfers.
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode : The communication is performed in the polling mode.
+            The status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode : The communication is performed using Interrupts
+            or DMA. These functions return the status of the transfer startup.
+            The end of the data processing will be indicated through the
+            dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when
+            using DMA mode.
+
+    (#) Blocking mode functions are :
+        (++) HAL_I2S_Transmit()
+        (++) HAL_I2S_Receive()
+
+    (#) No-Blocking mode functions with Interrupt are :
+        (++) HAL_I2S_Transmit_IT()
+        (++) HAL_I2S_Receive_IT()
+
+    (#) No-Blocking mode functions with DMA are :
+        (++) HAL_I2S_Transmit_DMA()
+        (++) HAL_I2S_Receive_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_I2S_TxCpltCallback()
+        (++) HAL_I2S_RxCpltCallback()
+        (++) HAL_I2S_ErrorCallback()
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief Transmit an amount of data in blocking mode
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @param  Timeout: Timeout duration
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+  if((pData == NULL ) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    if((tmp1 == I2S_DATAFORMAT_24B)|| \
+       (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->TxXferSize = Size*2;
+      hi2s->TxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->TxXferSize = Size;
+      hi2s->TxXferCount = Size;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_TX;
+
+    /* Check if the I2S is already enabled */
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */
+      __HAL_I2S_ENABLE(hi2s);
+    }
+
+    while(hi2s->TxXferCount > 0)
+    {
+      hi2s->Instance->DR = (*pData++);
+      hi2s->TxXferCount--;
+      /* Wait until TXE flag is set */
+      if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    /* Check if Slave mode is selected */
+    if(((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) || ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX))
+    {
+      /* Wait until Busy flag is reset */
+      if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, SET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    hi2s->State = HAL_I2S_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in blocking mode
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @param Timeout: Timeout duration
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate
+  *       in continuous way and as the I2S is not disabled at the end of the I2S transaction.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+  if((pData == NULL ) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    if((tmp1 == I2S_DATAFORMAT_24B)|| \
+       (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->RxXferSize = Size*2;
+      hi2s->RxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->RxXferSize = Size;
+      hi2s->RxXferCount = Size;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_RX;
+
+    /* Check if the I2S is already enabled */
+    if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */
+      __HAL_I2S_ENABLE(hi2s);
+    }
+
+    /* Check if Master Receiver mode is selected */
+    if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+    {
+      /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+      access to the SPI_SR register. */
+      __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+    }
+
+    /* Receive data */
+    while(hi2s->RxXferCount > 0)
+    {
+      /* Wait until RXNE flag is set */
+      if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      (*pData++) = hi2s->Instance->DR;
+      hi2s->RxXferCount--;
+    }
+
+    hi2s->State = HAL_I2S_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Transmit an amount of data in non-blocking mode with Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    hi2s->pTxBuffPtr = pData;
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    if((tmp1 == I2S_DATAFORMAT_24B)|| \
+      (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->TxXferSize = Size*2;
+      hi2s->TxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->TxXferSize = Size;
+      hi2s->TxXferCount = Size;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_TX;
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+    /* Enable TXE and ERR interrupt */
+    __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+    /* Check if the I2S is already enabled */
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */
+      __HAL_I2S_ENABLE(hi2s);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in non-blocking mode with Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronisation
+  * between Master and Slave otherwise the I2S interrupt should be optimized.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    hi2s->pRxBuffPtr = pData;
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    if((tmp1 == I2S_DATAFORMAT_24B)||\
+      (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->RxXferSize = Size*2;
+      hi2s->RxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->RxXferSize = Size;
+      hi2s->RxXferCount = Size;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_RX;
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+    /* Enable TXE and ERR interrupt */
+    __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+
+    /* Check if the I2S is already enabled */
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */
+      __HAL_I2S_ENABLE(hi2s);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Transmit an amount of data in non-blocking mode with DMA
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to the Transmit data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  if((pData == NULL) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    hi2s->pTxBuffPtr = pData;
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    if((tmp1 == I2S_DATAFORMAT_24B)|| \
+      (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->TxXferSize = Size*2;
+      hi2s->TxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->TxXferSize = Size;
+      hi2s->TxXferCount = Size;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_TX;
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+    /* Set the I2S Tx DMA Half transfer complete callback */
+    hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt;
+
+    /* Set the I2S Tx DMA transfer complete callback */
+    hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt;
+
+    /* Set the DMA error callback */
+    hi2s->hdmatx->XferErrorCallback = I2S_DMAError;
+
+    /* Enable the Tx DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize);
+
+    /* Check if the I2S is already enabled */
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */
+      __HAL_I2S_ENABLE(hi2s);
+    }
+
+     /* Check if the I2S Tx request is already enabled */
+    if((hi2s->Instance->CR2 & SPI_CR2_TXDMAEN) != SPI_CR2_TXDMAEN)
+    {
+      /* Enable Tx DMA Request */
+      hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in non-blocking mode with DMA
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  if((pData == NULL) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    hi2s->pRxBuffPtr = pData;
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    if((tmp1 == I2S_DATAFORMAT_24B)|| \
+      (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->RxXferSize = Size*2;
+      hi2s->RxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->RxXferSize = Size;
+      hi2s->RxXferCount = Size;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_RX;
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+    /* Set the I2S Rx DMA Half transfer complete callback */
+    hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt;
+
+    /* Set the I2S Rx DMA transfer complete callback */
+    hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt;
+
+    /* Set the DMA error callback */
+    hi2s->hdmarx->XferErrorCallback = I2S_DMAError;
+
+    /* Check if Master Receiver mode is selected */
+    if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+    {
+      /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read
+      access to the SPI_SR register. */
+      __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+    }
+
+    /* Enable the Rx DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
+
+    /* Check if the I2S is already enabled */
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */
+      __HAL_I2S_ENABLE(hi2s);
+    }
+
+     /* Check if the I2S Rx request is already enabled */
+    if((hi2s->Instance->CR2 &SPI_CR2_RXDMAEN) != SPI_CR2_RXDMAEN)
+    {
+      /* Enable Rx DMA Request */
+      hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Pauses the audio stream playing from the Media.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s)
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2s);
+
+  if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+  {
+    /* Disable the I2S DMA Tx request */
+    hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+  {
+    /* Disable the I2S DMA Rx request */
+    hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+  {
+    if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+    {
+      /* Disable the I2S DMA Tx request */
+      hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+    }
+    else
+    {
+      /* Disable the I2S DMA Rx request */
+      hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2s);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the audio stream playing from the Media.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s)
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2s);
+
+  if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+  {
+    /* Enable the I2S DMA Tx request */
+    hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+  {
+    /* Enable the I2S DMA Rx request */
+    hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+  {
+    if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+    {
+      /* Enable the I2S DMA Tx request */
+      hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+    }
+    else
+    {
+      /* Enable the I2S DMA Rx request */
+      hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+    }
+  }
+
+  /* If the I2S peripheral is still not enabled, enable it */
+  if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) == 0)
+  {
+    /* Enable I2S peripheral */
+    __HAL_I2S_ENABLE(hi2s);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2s);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the audio stream playing from the Media.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s)
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2s);
+
+  /* Disable the I2S Tx/Rx DMA requests */
+  hi2s->Instance->CR2 &= ~SPI_CR2_TXDMAEN;
+  hi2s->Instance->CR2 &= ~SPI_CR2_RXDMAEN;
+
+  /* Abort the I2S DMA Stream tx */
+  if(hi2s->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(hi2s->hdmatx);
+  }
+  /* Abort the I2S DMA Stream rx */
+  if(hi2s->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(hi2s->hdmarx);
+  }
+
+  /* Disable I2S peripheral */
+  __HAL_I2S_DISABLE(hi2s);
+
+  hi2s->State = HAL_I2S_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2s);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles I2S interrupt request.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+__weak void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+    if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+    {
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
+      /* I2S in mode Receiver ------------------------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        I2S_Receive_IT(hi2s);
+      }
+
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+      /* I2S Overrun error interrupt occurred ---------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+        hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+      }
+    }
+
+    if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+    {
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
+      /* I2S in mode Transmitter -----------------------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        I2S_Transmit_IT(hi2s);
+      }
+
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+      /* I2S Underrun error interrupt occurred --------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        __HAL_I2S_CLEAR_UDRFLAG(hi2s);
+        hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+    }
+  }
+
+  /* Call the Error call Back in case of Errors */
+  if(hi2s->ErrorCode != HAL_I2S_ERROR_NONE)
+  {
+    /* Set the I2S state ready to be able to start again the process */
+    hi2s->State= HAL_I2S_STATE_READY;
+    HAL_I2S_ErrorCallback(hi2s);
+  }
+}
+
+/**
+  * @brief Tx Transfer Half completed callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_TxHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx Transfer completed callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer half completed callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer completed callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief I2S error callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions
+  *  @brief   Peripheral State functions
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the I2S state
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL state
+  */
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s)
+{
+  return hi2s->State;
+}
+
+/**
+  * @brief  Return the I2S error code
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval I2S Error Code
+  */
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s)
+{
+  return hi2s->ErrorCode;
+}
+/**
+  * @}
+  */
+
+/**
+  * @brief DMA I2S transmit process half complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+ void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_I2S_TxHalfCpltCallback(hi2s);
+}
+
+/**
+  * @brief DMA I2S receive process half complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_I2S_RxHalfCpltCallback(hi2s);
+}
+
+/**
+  * @brief DMA I2S communication error callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void I2S_DMAError(DMA_HandleTypeDef *hdma)
+{
+  I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  hi2s->TxXferCount = 0;
+  hi2s->RxXferCount = 0;
+
+  hi2s->State= HAL_I2S_STATE_READY;
+
+  hi2s->ErrorCode |= HAL_I2S_ERROR_DMA;
+  HAL_I2S_ErrorCallback(hi2s);
+}
+
+/**
+  * @brief Transmit an amount of data in non-blocking mode with Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef I2S_Transmit_IT(I2S_HandleTypeDef *hi2s)
+{
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    /* Transmit data */
+    hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
+
+    hi2s->TxXferCount--;
+
+    if(hi2s->TxXferCount == 0)
+    {
+      /* Disable TXE and ERR interrupt */
+      __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+      hi2s->State = HAL_I2S_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2s);
+      HAL_I2S_TxCpltCallback(hi2s);
+    }
+    else
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2s);
+    }
+
+    return HAL_OK;
+  }
+
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in non-blocking mode with Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef I2S_Receive_IT(I2S_HandleTypeDef *hi2s)
+{
+  if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    /* Receive data */
+    (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
+
+    hi2s->RxXferCount--;
+
+    /* Check if Master Receiver mode is selected */
+    if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+    {
+      /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+      access to the SPI_SR register. */
+      __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+    }
+
+    if(hi2s->RxXferCount == 0)
+    {
+      /* Disable RXNE and ERR interrupt */
+      __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_RXNE | I2S_IT_ERR);
+
+      hi2s->State = HAL_I2S_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2s);
+
+      HAL_I2S_RxCpltCallback(hi2s);
+    }
+    else
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2s);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief This function handles I2S Communication Timeout.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param Flag: Flag checked
+  * @param Status: Value of the flag expected
+  * @param Timeout: Duration of the timeout
+  * @retval HAL status
+  */
+HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_I2S_GET_FLAG(hi2s, Flag) == RESET)
+    {
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Set the I2S State ready */
+          hi2s->State= HAL_I2S_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2s);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_I2S_GET_FLAG(hi2s, Flag) != RESET)
+    {
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Set the I2S State ready */
+          hi2s->State= HAL_I2S_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2s);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_I2S_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c
new file mode 100644
index 0000000..3296c13
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c
@@ -0,0 +1,1479 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_i2s_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   I2S HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of I2S extension peripheral:
+  *           + Extension features Functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### I2S Extension features #####
+  ==============================================================================
+  [..]
+     (#) In I2S full duplex mode, each SPI peripheral is able to manage sending and receiving
+         data simultaneously using two data lines. Each SPI peripheral has an extended block
+         called I2Sxext (i.e I2S2ext for SPI2 and I2S3ext for SPI3).
+     (#) The extension block is not a full SPI IP, it is used only as I2S slave to
+         implement full duplex mode. The extension block uses the same clock sources
+         as its master.
+
+     (#) Both I2Sx and I2Sx_ext can be configured as transmitters or receivers.
+
+     [..]
+       (@) Only I2Sx can deliver SCK and WS to I2Sx_ext in full duplex mode, where
+         I2Sx can be I2S2 or I2S3.
+
+                  ##### How to use this driver #####
+ ===============================================================================
+ [..]
+   Three operation modes are available within this driver :
+
+   *** Polling mode IO operation ***
+   =================================
+   [..]
+     (+) Send and receive in the same time an amount of data in blocking mode using HAL_I2S_TransmitReceive()
+
+   *** Interrupt mode IO operation ***
+   ===================================
+   [..]
+     (+) Send and receive in the same time an amount of data in non blocking mode using HAL_I2S_TransmitReceive_IT()
+     (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+     (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+     (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+     (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+     (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+         add his own code by customization of function pointer HAL_I2S_ErrorCallback
+
+   *** DMA mode IO operation ***
+   ==============================
+   [..]
+     (+) Send and receive an amount of data in non blocking mode (DMA) using HAL_I2S_TransmitReceive_DMA()
+     (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+     (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+     (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+     (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+     (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+         add his own code by customization of function pointer HAL_I2S_ErrorCallback
+     (+) Pause the DMA Transfer using HAL_I2S_DMAPause()
+     (+) Resume the DMA Transfer using HAL_I2S_DMAResume()
+     (+) Stop the DMA Transfer using HAL_I2S_DMAStop()
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup I2SEx I2SEx
+  * @brief I2S HAL module driver
+  * @{
+  */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup I2SEx_Private_Functions
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Functions I2S Exported Functions
+  * @{
+  */
+
+/** @defgroup I2SEx_Group1 Extension features functions
+  *  @brief   Extension features functions
+  *
+ at verbatim
+ ===============================================================================
+                       ##### Extension features Functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the I2S data
+    transfers.
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode : The communication is performed in the polling mode.
+            The status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode : The communication is performed using Interrupts
+            or DMA. These functions return the status of the transfer startup.
+            The end of the data processing will be indicated through the
+            dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when
+            using DMA mode.
+
+    (#) Blocking mode functions are :
+        (++) HAL_I2S_TransmitReceive()
+
+    (#) No-Blocking mode functions with Interrupt are :
+        (++) HAL_I2S_TransmitReceive_IT()
+
+    (#) No-Blocking mode functions with DMA are :
+        (++) HAL_I2S_TransmitReceive_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_I2S_TxCpltCallback()
+        (++) HAL_I2S_RxCpltCallback()
+        (++) HAL_I2S_ErrorCallback()
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief Initializes the I2S according to the specified parameters
+  *         in the I2S_InitTypeDef and create the associated handle.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s)
+{
+  uint32_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1;
+  uint32_t tmp = 0, i2sclk = 0;
+
+  /* Check the I2S handle allocation */
+  if(hi2s == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the I2S parameters */
+  assert_param(IS_I2S_MODE(hi2s->Init.Mode));
+  assert_param(IS_I2S_STANDARD(hi2s->Init.Standard));
+  assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat));
+  assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput));
+  assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq));
+  assert_param(IS_I2S_CPOL(hi2s->Init.CPOL));
+  assert_param(IS_I2S_CLOCKSOURCE(hi2s->Init.ClockSource));
+
+  if(hi2s->State == HAL_I2S_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hi2s->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX */
+    HAL_I2S_MspInit(hi2s);
+  }
+
+  hi2s->State = HAL_I2S_STATE_BUSY;
+
+  /*----------------------- SPIx I2SCFGR & I2SPR Configuration ---------------*/
+  /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+  hi2s->Instance->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
+                               SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
+                               SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
+  hi2s->Instance->I2SPR = 0x0002;
+
+  /* Get the I2SCFGR register value */
+  tmpreg = hi2s->Instance->I2SCFGR;
+
+  /* If the default frequency value has to be written, reinitialize i2sdiv and i2sodd */
+  /* If the requested audio frequency is not the default, compute the prescaler */
+  if(hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT)
+  {
+    /* Check the frame length (For the Prescaler computing) *******************/
+    if(hi2s->Init.DataFormat != I2S_DATAFORMAT_16B)
+    {
+      /* Packet length is 32 bits */
+      packetlength = 2;
+    }
+
+    /* Get I2S source Clock frequency  ****************************************/
+    i2sclk = I2S_GetInputClock(hi2s);
+
+    /* Compute the Real divider depending on the MCLK output state, with a floating point */
+    if(hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE)
+    {
+      /* MCLK output is enabled */
+      tmp = (uint32_t)(((((i2sclk / 256) * 10) / hi2s->Init.AudioFreq)) + 5);
+    }
+    else
+    {
+      /* MCLK output is disabled */
+      tmp = (uint32_t)(((((i2sclk / (32 * packetlength)) *10 ) / hi2s->Init.AudioFreq)) + 5);
+    }
+
+    /* Remove the flatting point */
+    tmp = tmp / 10;
+
+    /* Check the parity of the divider */
+    i2sodd = (uint32_t)(tmp & (uint32_t)1);
+
+    /* Compute the i2sdiv prescaler */
+    i2sdiv = (uint32_t)((tmp - i2sodd) / 2);
+
+    /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+    i2sodd = (uint32_t) (i2sodd << 8);
+  }
+
+  /* Test if the divider is 1 or 0 or greater than 0xFF */
+  if((i2sdiv < 2) || (i2sdiv > 0xFF))
+  {
+    /* Set the default values */
+    i2sdiv = 2;
+    i2sodd = 0;
+  }
+
+  /* Write to SPIx I2SPR register the computed value */
+  hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput));
+
+  /* Configure the I2S with the I2S_InitStruct values */
+  tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
+
+#if defined(SPI_I2SCFGR_ASTRTEN)
+  if (hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT)
+  {
+  /* Write to SPIx I2SCFGR */
+  hi2s->Instance->I2SCFGR = tmpreg | SPI_I2SCFGR_ASTRTEN;
+  }
+  else
+  {
+  /* Write to SPIx I2SCFGR */
+  hi2s->Instance->I2SCFGR = tmpreg;
+  }
+#else
+  /* Write to SPIx I2SCFGR */
+  hi2s->Instance->I2SCFGR = tmpreg;
+#endif
+
+  /* Configure the I2S extended if the full duplex mode is enabled */
+  assert_param(IS_I2S_FULLDUPLEX_MODE(hi2s->Init.FullDuplexMode));
+  if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
+  {
+    /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+    I2SxEXT(hi2s->Instance)->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
+                                          SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
+                                          SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
+    I2SxEXT(hi2s->Instance)->I2SPR = 2;
+
+    /* Get the I2SCFGR register value */
+    tmpreg = I2SxEXT(hi2s->Instance)->I2SCFGR;
+
+    /* Get the mode to be configured for the extended I2S */
+    if((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX))
+    {
+      tmp = I2S_MODE_SLAVE_RX;
+    }
+    else
+    {
+      if((hi2s->Init.Mode == I2S_MODE_MASTER_RX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_RX))
+      {
+        tmp = I2S_MODE_SLAVE_TX;
+      }
+    }
+
+    /* Configure the I2S Slave with the I2S Master parameter values */
+    tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | tmp | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
+
+    /* Write to SPIx I2SCFGR */
+    I2SxEXT(hi2s->Instance)->I2SCFGR = tmpreg;
+  }
+
+  hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+  hi2s->State= HAL_I2S_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Full-Duplex Transmit/Receive data in blocking mode.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pTxData: a 16-bit pointer to the Transmit data buffer.
+  * @param pRxData: a 16-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @param Timeout: Timeout duration
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Check the I2S State */
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
+       is selected during the I2S configuration phase, the Size parameter means the number
+       of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
+       frame is selected the Size parameter means the number of 16-bit data length. */
+    if((tmp1 == I2S_DATAFORMAT_24B)|| \
+       (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->TxXferSize = Size*2;
+      hi2s->TxXferCount = Size*2;
+      hi2s->RxXferSize = Size*2;
+      hi2s->RxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->TxXferSize = Size;
+      hi2s->TxXferCount = Size;
+      hi2s->RxXferSize = Size;
+      hi2s->RxXferCount = Size;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    /* Set the I2S State busy TX/RX */
+    hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
+
+    tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+    tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+    /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+    if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
+    {
+      /* Check if the I2S is already enabled: The I2S is kept enabled at the end of transaction
+      to avoid the clock de-synchronization between Master and Slave. */
+      if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+      {
+        /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
+        I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+
+        /* Enable I2Sx peripheral */
+        __HAL_I2S_ENABLE(hi2s);
+      }
+
+      while(hi2s->TxXferCount > 0)
+      {
+        /* Wait until TXE flag is set */
+        if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        hi2s->Instance->DR = (*pTxData++);
+
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait until RXNE flag is set */
+        while((I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE) != SPI_SR_RXNE)
+        {
+          if(Timeout != HAL_MAX_DELAY)
+          {
+            if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+            {
+              /* Process Unlocked */
+              __HAL_UNLOCK(hi2s);
+
+              return HAL_TIMEOUT;
+            }
+          }
+        }
+        (*pRxData++) = I2SxEXT(hi2s->Instance)->DR;
+
+        hi2s->TxXferCount--;
+        hi2s->RxXferCount--;
+      }
+    }
+    /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
+    else
+    {
+      /* Check if the I2S is already enabled */
+      if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+      {
+        /* Enable I2S peripheral before the I2Sext*/
+        __HAL_I2S_ENABLE(hi2s);
+
+        /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
+        I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+      }
+      else
+      {
+        /* Check if Master Receiver mode is selected */
+        if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+        {
+          /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+          access to the SPI_SR register. */
+          __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+        }
+      }
+      while(hi2s->TxXferCount > 0)
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait until TXE flag is set */
+        while((I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE) != SPI_SR_TXE)
+        {
+          if(Timeout != HAL_MAX_DELAY)
+          {
+            if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+            {
+              /* Process Unlocked */
+              __HAL_UNLOCK(hi2s);
+
+              return HAL_TIMEOUT;
+            }
+          }
+        }
+        I2SxEXT(hi2s->Instance)->DR = (*pTxData++);
+
+        /* Wait until RXNE flag is set */
+        if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        (*pRxData++) = hi2s->Instance->DR;
+
+        hi2s->TxXferCount--;
+        hi2s->RxXferCount--;
+      }
+    }
+
+    /* Set the I2S State ready */
+    hi2s->State = HAL_I2S_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pTxData: a 16-bit pointer to the Transmit data buffer.
+  * @param pRxData: a 16-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    hi2s->pTxBuffPtr = pTxData;
+    hi2s->pRxBuffPtr = pRxData;
+
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
+       is selected during the I2S configuration phase, the Size parameter means the number
+       of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
+       frame is selected the Size parameter means the number of 16-bit data length. */
+    if((tmp1 == I2S_DATAFORMAT_24B)||\
+       (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->TxXferSize = Size*2;
+      hi2s->TxXferCount = Size*2;
+      hi2s->RxXferSize = Size*2;
+      hi2s->RxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->TxXferSize = Size;
+      hi2s->TxXferCount = Size;
+      hi2s->RxXferSize = Size;
+      hi2s->RxXferCount = Size;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+    tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+    tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+    /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+    if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
+    {
+      /* Enable I2Sext RXNE and ERR interrupts */
+      I2SxEXT(hi2s->Instance)->CR2 |= (I2S_IT_RXNE | I2S_IT_ERR);
+
+      /* Enable I2Sx TXE and ERR interrupts */
+      __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+      /* Check if the I2S is already enabled */
+      if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+      {
+        /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
+        I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+
+        /* Enable I2Sx peripheral */
+        __HAL_I2S_ENABLE(hi2s);
+      }
+    }
+    /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
+    else
+    {
+      /* Enable I2Sext TXE and ERR interrupts */
+      I2SxEXT(hi2s->Instance)->CR2 |= (I2S_IT_TXE |I2S_IT_ERR);
+
+      /* Enable I2Sext RXNE and ERR interrupts */
+      __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+
+      /* Check if the I2S is already enabled */
+      if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+      {
+        /* Check if the I2S_MODE_MASTER_RX is selected */
+        if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+        {
+          /* Prepare the First Data before enabling the I2S */
+          if(hi2s->TxXferCount != 0)
+          {
+            /* Transmit First data */
+            I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++);
+            hi2s->TxXferCount--;
+
+            if(hi2s->TxXferCount == 0)
+            {
+              /* Disable I2Sext TXE interrupt */
+              I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_TXE;
+            }
+          }
+        }
+        /* Enable I2S peripheral */
+        __HAL_I2S_ENABLE(hi2s);
+
+        /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
+        I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+      }
+    }
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Full-Duplex Transmit/Receive data in non-blocking mode using DMA
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pTxData: a 16-bit pointer to the Transmit data buffer.
+  * @param pRxData: a 16-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size)
+{
+  uint32_t *tmp;
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    hi2s->pTxBuffPtr = pTxData;
+    hi2s->pRxBuffPtr = pRxData;
+
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
+       is selected during the I2S configuration phase, the Size parameter means the number
+       of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
+       frame is selected the Size parameter means the number of 16-bit data length. */
+    if((tmp1 == I2S_DATAFORMAT_24B)||\
+       (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->TxXferSize = Size*2;
+      hi2s->TxXferCount = Size*2;
+      hi2s->RxXferSize = Size*2;
+      hi2s->RxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->TxXferSize = Size;
+      hi2s->TxXferCount = Size;
+      hi2s->RxXferSize = Size;
+      hi2s->RxXferCount = Size;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+    /* Set the I2S Rx DMA Half transfer complete callback */
+    hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt;
+
+    /* Set the I2S Rx DMA transfer complete callback */
+    hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt;
+
+    /* Set the I2S Rx DMA error callback */
+    hi2s->hdmarx->XferErrorCallback = I2S_DMAError;
+
+    /* Set the I2S Tx DMA Half transfer complete callback */
+    hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt;
+
+    /* Set the I2S Tx DMA transfer complete callback */
+    hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt;
+
+    /* Set the I2S Tx DMA error callback */
+    hi2s->hdmatx->XferErrorCallback = I2S_DMAError;
+
+    tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+    tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+    /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+    if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
+    {
+      /* Enable the Rx DMA Stream */
+      tmp = (uint32_t*)&pRxData;
+      HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
+
+      /* Enable Rx DMA Request */
+      I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_RXDMAEN;
+
+      /* Enable the Tx DMA Stream */
+      tmp = (uint32_t*)&pTxData;
+      HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize);
+
+      /* Enable Tx DMA Request */
+      hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+
+      /* Check if the I2S is already enabled */
+      if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+      {
+        /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
+        I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+
+        /* Enable I2S peripheral after the I2Sext */
+        __HAL_I2S_ENABLE(hi2s);
+      }
+    }
+    else
+    {
+      /* Enable the Tx DMA Stream */
+      tmp = (uint32_t*)&pTxData;
+      HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, hi2s->TxXferSize);
+
+      /* Enable Tx DMA Request */
+      I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_TXDMAEN;
+
+      /* Enable the Rx DMA Stream */
+      tmp = (uint32_t*)&pRxData;
+      HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
+
+      /* Enable Rx DMA Request */
+      hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+
+      /* Check if the I2S is already enabled */
+      if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+      {
+        /* Enable I2S peripheral before the I2Sext */
+        __HAL_I2S_ENABLE(hi2s);
+
+        /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
+        I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
+      }
+      else
+      {
+        /* Check if Master Receiver mode is selected */
+        if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+        {
+          /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+          access to the SPI_SR register. */
+          __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+        }
+      }
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Pauses the audio stream playing from the Media.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s)
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2s);
+
+  if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+  {
+    /* Disable the I2S DMA Tx request */
+    hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+  {
+    /* Disable the I2S DMA Rx request */
+    hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+  {
+    if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+    {
+      /* Disable the I2S DMA Tx request */
+      hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+      /* Disable the I2SEx Rx DMA Request */
+      I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+    }
+    else
+    {
+      /* Disable the I2S DMA Rx request */
+      hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+      /* Disable the I2SEx Tx DMA Request */
+      I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2s);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the audio stream playing from the Media.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s)
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2s);
+
+  if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+  {
+    /* Enable the I2S DMA Tx request */
+    hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+  {
+    /* Enable the I2S DMA Rx request */
+    hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+  {
+    if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+    {
+      /* Enable the I2S DMA Tx request */
+      hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+      /* Disable the I2SEx Rx DMA Request */
+      I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_RXDMAEN;
+    }
+    else
+    {
+      /* Enable the I2S DMA Rx request */
+      hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+      /* Enable the I2SEx Tx DMA Request */
+      I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_TXDMAEN;
+    }
+  }
+
+  /* If the I2S peripheral is still not enabled, enable it */
+  if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) == 0)
+  {
+    /* Enable I2S peripheral */
+    __HAL_I2S_ENABLE(hi2s);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2s);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the audio stream playing from the Media.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s)
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2s);
+
+  /* Disable the I2S Tx/Rx DMA requests */
+  hi2s->Instance->CR2 &= ~SPI_CR2_TXDMAEN;
+  hi2s->Instance->CR2 &= ~SPI_CR2_RXDMAEN;
+
+  if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
+  {
+    /* Disable the I2S extended Tx/Rx DMA requests */
+    I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+    I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+  }
+
+  /* Abort the I2S DMA Stream tx */
+  if(hi2s->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(hi2s->hdmatx);
+  }
+  /* Abort the I2S DMA Stream rx */
+  if(hi2s->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(hi2s->hdmarx);
+  }
+
+  /* Disable I2S peripheral */
+  __HAL_I2S_DISABLE(hi2s);
+
+  if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
+  {
+    /* Disable the I2Sext peripheral */
+    I2SxEXT(hi2s->Instance)->I2SCFGR &= ~SPI_I2SCFGR_I2SE;
+  }
+  hi2s->State = HAL_I2S_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2s);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles I2S interrupt request.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+  __IO uint32_t tmpreg1 = 0;
+  if(hi2s->Init.FullDuplexMode != I2S_FULLDUPLEXMODE_ENABLE)
+  {
+    if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+    {
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
+      /* I2S in mode Receiver ------------------------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        I2S_Receive_IT(hi2s);
+      }
+
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+      /* I2S Overrun error interrupt occurred ---------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+        hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+      }
+    }
+
+    if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+    {
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
+      /* I2S in mode Tramitter -----------------------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        I2S_Transmit_IT(hi2s);
+      }
+
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+      /* I2S Underrun error interrupt occurred --------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        __HAL_I2S_CLEAR_UDRFLAG(hi2s);
+        hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+      }
+    }
+  }
+  else
+  {
+    tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+    tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+    /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+    if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
+    {
+      tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE;
+      tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_RXNE;
+      /* I2Sext in mode Receiver ---------------------------------------------*/
+      if((tmp1 == SPI_SR_RXNE) && (tmp2 == I2S_IT_RXNE))
+      {
+        tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+        tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+        /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX,
+        the I2Sext RXNE interrupt will be generated to manage the full-duplex receive phase. */
+        if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
+        {
+          I2SEx_TransmitReceive_IT(hi2s);
+        }
+      }
+
+      tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_OVR;
+      tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_ERR;
+      /* I2Sext Overrun error interrupt occurred ------------------------------*/
+      if((tmp1 == SPI_SR_OVR) && (tmp2 == I2S_IT_ERR))
+      {
+        /* Clear I2Sext OVR Flag */
+        tmpreg1 = I2SxEXT(hi2s->Instance)->DR;
+        tmpreg1 = I2SxEXT(hi2s->Instance)->SR;
+        hi2s->ErrorCode |= HAL_I2SEX_ERROR_OVR;
+        UNUSED(tmpreg1);
+      }
+
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
+      /* I2S in mode Tramitter -----------------------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+        tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+        /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX,
+        the I2S TXE interrupt will be generated to manage the full-duplex transmit phase. */
+        if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
+        {
+          I2SEx_TransmitReceive_IT(hi2s);
+        }
+      }
+
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+      /* I2S Underrun error interrupt occurred --------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        __HAL_I2S_CLEAR_UDRFLAG(hi2s);
+        hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+      }
+    }
+    /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
+    else
+    {
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
+      /* I2S in mode Receiver ------------------------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+        tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+        /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX,
+        the I2S RXNE interrupt will be generated to manage the full-duplex receive phase. */
+        if((tmp1 == I2S_MODE_MASTER_RX) || (tmp2 == I2S_MODE_SLAVE_RX))
+        {
+          I2SEx_TransmitReceive_IT(hi2s);
+        }
+      }
+
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+      /* I2S Overrun error interrupt occurred ---------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+        hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+      }
+
+      tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE;
+      tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_TXE;
+      /* I2Sext in mode Tramitter --------------------------------------------*/
+      if((tmp1 == SPI_SR_TXE) && (tmp2 == I2S_IT_TXE))
+      {
+        tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+        tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+        /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX,
+        the I2Sext TXE interrupt will be generated to manage the full-duplex transmit phase. */
+        if((tmp1 == I2S_MODE_MASTER_RX) || (tmp2 == I2S_MODE_SLAVE_RX))
+        {
+          I2SEx_TransmitReceive_IT(hi2s);
+        }
+      }
+
+      tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_UDR;
+      tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_ERR;
+      /* I2Sext Underrun error interrupt occurred -----------------------------*/
+      if((tmp1 == SPI_SR_UDR) && (tmp2 == I2S_IT_ERR))
+      {
+        /* Clear I2Sext UDR Flag */
+        tmpreg1 = I2SxEXT(hi2s->Instance)->SR;
+        hi2s->ErrorCode |= HAL_I2SEX_ERROR_UDR;
+        UNUSED(tmpreg1);
+      }
+    }
+  }
+
+  /* Call the Error call Back in case of Errors */
+  if(hi2s->ErrorCode != HAL_I2S_ERROR_NONE)
+  {
+    /* Set the I2S state ready to be able to start again the process */
+    hi2s->State= HAL_I2S_STATE_READY;
+    HAL_I2S_ErrorCallback(hi2s);
+  }
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+    tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
+    /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
+    if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
+    {
+      if(hi2s->TxXferCount != 0)
+      {
+        if(__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE) != RESET)
+        {
+          /* Transmit data */
+          hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
+          hi2s->TxXferCount--;
+
+          if(hi2s->TxXferCount == 0)
+          {
+            /* Disable TXE interrupt */
+            __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_TXE);
+          }
+        }
+      }
+
+      if(hi2s->RxXferCount != 0)
+      {
+        if((I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE) == SPI_SR_RXNE)
+        {
+          /* Receive data */
+          (*hi2s->pRxBuffPtr++) = I2SxEXT(hi2s->Instance)->DR;
+          hi2s->RxXferCount--;
+
+          if(hi2s->RxXferCount == 0)
+          {
+            /* Disable I2Sext RXNE interrupt */
+            I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_RXNE;
+          }
+        }
+      }
+    }
+    /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
+    else
+    {
+      if(hi2s->TxXferCount != 0)
+      {
+        if((I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE) == SPI_SR_TXE)
+        {
+          /* Transmit data */
+          I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++);
+          hi2s->TxXferCount--;
+
+          if(hi2s->TxXferCount == 0)
+          {
+            /* Disable I2Sext TXE interrupt */
+            I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_TXE;
+
+            HAL_I2S_TxCpltCallback(hi2s);
+          }
+        }
+      }
+      if(hi2s->RxXferCount != 0)
+      {
+        if(__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE) != RESET)
+        {
+          /* Receive data */
+          (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
+          hi2s->RxXferCount--;
+
+          if(hi2s->RxXferCount == 0)
+          {
+            /* Disable RXNE interrupt */
+            __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_RXNE);
+
+            HAL_I2S_RxCpltCallback(hi2s);
+          }
+        }
+      }
+    }
+
+    tmp1 = hi2s->RxXferCount;
+    tmp2 = hi2s->TxXferCount;
+    if((tmp1 == 0) && (tmp2 == 0))
+    {
+      /* Disable I2Sx ERR interrupt */
+      __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_ERR);
+      /* Disable I2Sext ERR interrupt */
+      I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_ERR;
+
+      hi2s->State = HAL_I2S_STATE_READY;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+#endif /* STM32F40xxx/ STM32F41xxx/ STM32F42xxx/ STM32F43xxx/ STM32F401xx/ STM32F411xx */
+/**
+  * @brief DMA I2S transmit process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void I2S_DMATxCplt(DMA_HandleTypeDef *hdma)
+{
+  I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    hi2s->TxXferCount = 0;
+
+    /* Disable Tx DMA Request */
+    hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+    if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
+    {
+      /* Disable Rx DMA Request for the slave*/
+      I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+    }
+#endif /* STM32F40xxx/ STM32F41xxx/ STM32F42xxx/ STM32F43xxx/ STM32F401xx/ STM32F411xx */
+    if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+    {
+      if(hi2s->RxXferCount == 0)
+      {
+        hi2s->State = HAL_I2S_STATE_READY;
+      }
+    }
+    else
+    {
+      hi2s->State = HAL_I2S_STATE_READY;
+    }
+  }
+  HAL_I2S_TxCpltCallback(hi2s);
+}
+
+/**
+  * @brief DMA I2S receive process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void I2S_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+  I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    /* Disable Rx DMA Request */
+    hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+    if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
+    {
+      /* Disable Tx DMA Request for the slave*/
+      I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+    }
+#endif /* STM32F40xxx/ STM32F41xxx/ STM32F42xxx/ STM32F43xxx/ STM32F401xx/ STM32F411xx */
+    hi2s->RxXferCount = 0;
+    if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+    {
+      if(hi2s->TxXferCount == 0)
+      {
+        hi2s->State = HAL_I2S_STATE_READY;
+      }
+    }
+    else
+    {
+      hi2s->State = HAL_I2S_STATE_READY;
+    }
+  }
+  HAL_I2S_RxCpltCallback(hi2s);
+}
+
+/**
+  * @brief  Get I2S clock Input based on Source clock selection in RCC
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval I2S Clock Input
+  */
+uint32_t I2S_GetInputClock(I2S_HandleTypeDef *hi2s)
+{
+  /* This variable used to store the VCO Input (value in Hz) */
+  uint32_t vcoinput = 0;
+  /* This variable used to store the VCO Output (value in Hz) */
+  uint32_t vcooutput = 0;
+  /* This variable used to store the I2S_CK_x (value in Hz) */
+  uint32_t i2ssourceclock = 0;
+
+  /* Configure SAI Clock based on SAI source clock selection */
+#if defined(STM32F446xx)
+  switch(hi2s->Init.ClockSource)
+  {
+    case I2S_CLOCK_EXTERNAL :
+    {
+      /* Set the I2S clock to the external clock  value */
+      i2ssourceclock = EXTERNAL_CLOCK_VALUE;
+      break;
+    }
+    case I2S_CLOCK_PLL :
+    {
+      /* Configure the PLLI2S division factor */
+      /* PLLI2S_VCO Input  = PLL_SOURCE/PLLI2SM */
+      if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+      {
+        /* Get the I2S source clock value */
+        vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+      }
+      else
+      {
+        /* Get the I2S source clock value */
+        vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+      }
+
+      /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+      vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6) & (RCC_PLLI2SCFGR_PLLI2SN >> 6)));
+      /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
+      i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28) & (RCC_PLLI2SCFGR_PLLI2SR >> 28)));
+      break;
+    }
+    case I2S_CLOCK_PLLR :
+    {
+      /* Configure the PLLI2S division factor */
+      /* PLL_VCO Input  = PLL_SOURCE/PLLM */
+      if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+      {
+        /* Get the I2S source clock value */
+        vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+      }
+      else
+      {
+        /* Get the I2S source clock value */
+        vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+      }
+
+      /* PLL_VCO Output = PLL_VCO Input * PLLN */
+      vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6) & (RCC_PLLCFGR_PLLN >> 6)));
+      /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
+      i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28) & (RCC_PLLCFGR_PLLR >> 28)));
+      break;
+    }
+    case I2S_CLOCK_PLLSRC :
+    {
+      /* Configure the PLLI2S division factor */
+      /* PLL_VCO Input  = PLL_SOURCE/PLLM */
+      if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+      {
+        /* Get the I2S source clock value */
+        i2ssourceclock = (uint32_t)(HSE_VALUE);
+      }
+      else
+      {
+        /* Get the I2S source clock value */
+        i2ssourceclock = (uint32_t)(HSI_VALUE);
+      }
+      break;
+    }
+    default :
+    {
+      break;
+    }
+  }
+#endif /* STM32F446xx */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE)
+
+  /* If an external I2S clock has to be used, the specific define should be set
+  in the project configuration or in the stm32f4xx_conf.h file */
+  if(hi2s->Init.ClockSource == I2S_CLOCK_EXTERNAL)
+  {
+    /* Enable the External Clock selection */
+    __HAL_RCC_I2S_CONFIG(RCC_I2SCLKSOURCE_EXT);
+
+    /* Set the I2S clock to the external clock  value */
+    i2ssourceclock = EXTERNAL_CLOCK_VALUE;
+  }
+  else
+  {
+    /* Configure the PLLI2S division factor */
+    /* PLLI2S_VCO Input  = PLL_SOURCE/PLLM */
+    if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+    {
+      /* Get the I2S source clock value */
+      vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+    }
+    else
+    {
+      /* Get the I2S source clock value */
+      vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+    }
+
+    /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+    vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6) & (RCC_PLLI2SCFGR_PLLI2SN >> 6)));
+    /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
+    i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28) & (RCC_PLLI2SCFGR_PLLI2SR >> 28)));
+  }
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx */
+
+#if defined(STM32F411xE)
+
+  /* If an external I2S clock has to be used, the specific define should be set
+  in the project configuration or in the stm32f4xx_conf.h file */
+  if(hi2s->Init.ClockSource == I2S_CLOCK_EXTERNAL)
+  {
+    /* Enable the External Clock selection */
+    __HAL_RCC_I2S_CONFIG(RCC_I2SCLKSOURCE_EXT);
+
+    /* Set the I2S clock to the external clock  value */
+    i2ssourceclock = EXTERNAL_CLOCK_VALUE;
+  }
+  else
+  {
+    /* Configure the PLLI2S division factor */
+    /* PLLI2S_VCO Input  = PLL_SOURCE/PLLI2SM */
+    if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+    {
+      /* Get the I2S source clock value */
+      vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+    }
+    else
+    {
+      /* Get the I2S source clock value */
+      vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+    }
+
+    /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+    vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6) & (RCC_PLLI2SCFGR_PLLI2SN >> 6)));
+    /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
+    i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28) & (RCC_PLLI2SCFGR_PLLI2SR >> 28)));
+  }
+#endif /* STM32F411xE */
+
+  /* the return result is the value of SAI clock */
+  return i2ssourceclock;
+
+}
+/**
+  * @}
+  */
+
+#endif /* HAL_I2S_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c
new file mode 100644
index 0000000..c061ec8
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c
@@ -0,0 +1,1504 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_irda.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   IRDA HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the IrDA SIR ENDEC block (IrDA):
+  *           + Initialization and de-initialization methods
+  *           + IO operation methods
+  *           + Peripheral Control methods
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    The IRDA HAL driver can be used as follows:
+
+    (#) Declare a IRDA_HandleTypeDef handle structure.
+    (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API:
+        (##) Enable the USARTx interface clock.
+        (##) IRDA pins configuration:
+            (+++) Enable the clock for the IRDA GPIOs.
+            (+++) Configure these IRDA pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT()
+             and HAL_IRDA_Receive_IT() APIs):
+            (+++) Configure the USARTx interrupt priority.
+            (+++) Enable the NVIC USART IRQ handle.
+        (##) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA()
+             and HAL_IRDA_Receive_DMA() APIs):
+            (+++) Declare a DMA handle structure for the Tx/Rx stream.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+            (+++) Configure the DMA Tx/Rx Stream.
+            (+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
+
+    (#) Program the Baud Rate, Word Length, Parity, IrDA Mode, Prescaler
+        and Mode(Receiver/Transmitter) in the hirda Init structure.
+
+    (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API:
+        (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+            by calling the customized HAL_IRDA_MspInit() API.
+    -@@- The specific IRDA interrupts (Transmission complete interrupt,
+        RXNE interrupt and Error Interrupts) will be managed using the macros
+        __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process.
+
+    (#) Three operation modes are available within this driver :
+
+    *** Polling mode IO operation ***
+    =================================
+    [..]
+      (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit()
+      (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive()
+
+    *** Interrupt mode IO operation ***
+    ===================================
+    [..]
+      (+) Send an amount of data in non blocking mode using HAL_IRDA_Transmit_IT()
+      (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_IRDA_TxCpltCallback
+      (+) Receive an amount of data in non blocking mode using HAL_IRDA_Receive_IT()
+      (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_IRDA_RxCpltCallback
+      (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_IRDA_ErrorCallback
+
+    *** DMA mode IO operation ***
+    =============================
+    [..]
+      (+) Send an amount of data in non blocking mode (DMA) using HAL_IRDA_Transmit_DMA()
+      (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_IRDA_TxCpltCallback
+      (+) Receive an amount of data in non blocking mode (DMA) using HAL_IRDA_Receive_DMA()
+      (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_IRDA_RxCpltCallback
+      (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_IRDA_ErrorCallback
+
+    *** IRDA HAL driver macros list ***
+    ===================================
+    [..]
+      Below the list of most used macros in IRDA HAL driver.
+
+     (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral
+     (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral
+     (+) __HAL_IRDA_GET_FLAG : Checks whether the specified IRDA flag is set or not
+     (+) __HAL_IRDA_CLEAR_FLAG : Clears the specified IRDA pending flag
+     (+) __HAL_IRDA_ENABLE_IT: Enables the specified IRDA interrupt
+     (+) __HAL_IRDA_DISABLE_IT: Disables the specified IRDA interrupt
+
+     (@) You can refer to the IRDA HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup IRDA IRDA
+  * @brief HAL IRDA module driver
+  * @{
+  */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup IRDA_Private_Constants
+  * @{
+  */
+#define IRDA_TIMEOUT_VALUE  22000
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup IRDA_Private_Functions
+  * @{
+  */
+static void IRDA_SetConfig (IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda);
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Functions IrDA Exported Functions
+  * @{
+  */
+
+/** @defgroup IRDA_Exported_Functions_Group1 IrDA Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+ at verbatim
+
+===============================================================================
+            ##### Initialization and Configuration functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
+    in IrDA mode.
+      (+) For the asynchronous mode only these parameters can be configured:
+        (++) BaudRate
+        (++) WordLength
+        (++) Parity: If the parity is enabled, then the MSB bit of the data written
+             in the data register is transmitted but is changed by the parity bit.
+             Depending on the frame length defined by the M bit (8-bits or 9-bits),
+             please refer to Reference manual for possible IRDA frame formats.
+        (++) Prescaler: A pulse of width less than two and greater than one PSC period(s) may or may
+             not be rejected. The receiver set up time should be managed by software. The IrDA physical layer
+             specification specifies a minimum of 10 ms delay between transmission and
+             reception (IrDA is a half duplex protocol).
+        (++) Mode: Receiver/transmitter modes
+        (++) IrDAMode: the IrDA can operate in the Normal mode or in the Low power mode.
+    [..]
+    The HAL_IRDA_Init() API follows IRDA configuration procedures (details for the procedures
+    are available in reference manual).
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the IRDA mode according to the specified
+  *         parameters in the IRDA_InitTypeDef and create the associated handle.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda)
+{
+  /* Check the IRDA handle allocation */
+  if(hirda == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the IRDA instance parameters */
+  assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+  /* Check the IRDA mode parameter in the IRDA handle */
+  assert_param(IS_IRDA_POWERMODE(hirda->Init.IrDAMode));
+
+  if(hirda->State == HAL_IRDA_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hirda->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+    HAL_IRDA_MspInit(hirda);
+  }
+
+  hirda->State = HAL_IRDA_STATE_BUSY;
+
+  /* Disable the IRDA peripheral */
+  __HAL_IRDA_DISABLE(hirda);
+
+  /* Set the IRDA communication parameters */
+  IRDA_SetConfig(hirda);
+
+  /* In IrDA mode, the following bits must be kept cleared:
+     - LINEN, STOP and CLKEN bits in the USART_CR2 register,
+     - SCEN and HDSEL bits in the USART_CR3 register.*/
+  hirda->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_STOP | USART_CR2_CLKEN);
+  hirda->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL);
+
+  /* Enable the IRDA peripheral */
+  __HAL_IRDA_ENABLE(hirda);
+
+  /* Set the prescaler */
+  MODIFY_REG(hirda->Instance->GTPR, USART_GTPR_PSC, hirda->Init.Prescaler);
+
+  /* Configure the IrDA mode */
+  MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.IrDAMode);
+
+  /* Enable the IrDA mode by setting the IREN bit in the CR3 register */
+  hirda->Instance->CR3 |= USART_CR3_IREN;
+
+  /* Initialize the IRDA state*/
+  hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+  hirda->State= HAL_IRDA_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the IRDA peripheral
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda)
+{
+  /* Check the IRDA handle allocation */
+  if(hirda == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+
+  hirda->State = HAL_IRDA_STATE_BUSY;
+
+  /* Disable the Peripheral */
+  __HAL_IRDA_DISABLE(hirda);
+
+  /* DeInit the low level hardware */
+  HAL_IRDA_MspDeInit(hirda);
+
+  hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+  hirda->State = HAL_IRDA_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hirda);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  IRDA MSP Init.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+ __weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_IRDA_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  IRDA MSP DeInit.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+ __weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_IRDA_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions
+  *  @brief   IRDA Transmit/Receive functions
+  *
+ at verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    This subsection provides a set of functions allowing to manage the IRDA data transfers.
+    [..]
+    IrDA is a half duplex communication protocol. If the Transmitter is busy, any data
+    on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver
+    is busy, data on the TX from the USART to IrDA will not be encoded by IrDA.
+    While receiving data, transmission should be avoided as the data to be transmitted
+    could be corrupted.
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode: The communication is performed in polling mode.
+            The HAL status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode: The communication is performed using Interrupts
+           or DMA, These APIs return the HAL status.
+           The end of the data processing will be indicated through the
+           dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when
+           using DMA mode.
+           The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks
+           will be executed respectively at the end of the transmit or Receive process
+           The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected
+
+    (#) Blocking mode API's are :
+        (++) HAL_IRDA_Transmit()
+        (++) HAL_IRDA_Receive()
+
+    (#) Non Blocking mode APIs with Interrupt are :
+        (++) HAL_IRDA_Transmit_IT()
+        (++) HAL_IRDA_Receive_IT()
+        (++) HAL_IRDA_IRQHandler()
+
+    (#) Non Blocking mode functions with DMA are :
+        (++) HAL_IRDA_Transmit_DMA()
+        (++) HAL_IRDA_Receive_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_IRDA_TxCpltCallback()
+        (++) HAL_IRDA_RxCpltCallback()
+        (++) HAL_IRDA_ErrorCallback()
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sends an amount of data in blocking mode.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Specify timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+  uint32_t  tmp1 = 0;
+
+  tmp1 = hirda->State;
+  if((tmp1 == HAL_IRDA_STATE_READY) || (tmp1 == HAL_IRDA_STATE_BUSY_RX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX;
+    }
+
+    hirda->TxXferSize = Size;
+    hirda->TxXferCount = Size;
+    while(hirda->TxXferCount > 0)
+    {
+      hirda->TxXferCount--;
+      if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
+      {
+        if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        tmp = (uint16_t*) pData;
+        hirda->Instance->DR = (*tmp & (uint16_t)0x01FF);
+        if(hirda->Init.Parity == IRDA_PARITY_NONE)
+        {
+          pData +=2;
+        }
+        else
+        {
+          pData +=1;
+        }
+      }
+      else
+      {
+        if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        hirda->Instance->DR = (*pData++ & (uint8_t)0xFF);
+      }
+    }
+
+    if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_READY;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in blocking mode.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @param  Timeout: Specify timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+  uint32_t  tmp1 = 0;
+
+  tmp1 = hirda->State;
+  if((tmp1 == HAL_IRDA_STATE_READY) || (tmp1 == HAL_IRDA_STATE_BUSY_TX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_RX;
+    }
+    hirda->RxXferSize = Size;
+    hirda->RxXferCount = Size;
+    /* Check the remain data to be received */
+    while(hirda->RxXferCount > 0)
+    {
+      hirda->RxXferCount--;
+      if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
+      {
+        if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        tmp = (uint16_t*) pData ;
+        if(hirda->Init.Parity == IRDA_PARITY_NONE)
+        {
+          *tmp = (uint16_t)(hirda->Instance->DR & (uint16_t)0x01FF);
+           pData +=2;
+        }
+        else
+        {
+          *tmp = (uint16_t)(hirda->Instance->DR & (uint16_t)0x00FF);
+          pData +=1;
+        }
+      }
+      else
+      {
+        if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        if(hirda->Init.Parity == IRDA_PARITY_NONE)
+        {
+          *pData++ = (uint8_t)(hirda->Instance->DR & (uint8_t)0x00FF);
+        }
+        else
+        {
+          *pData++ = (uint8_t)(hirda->Instance->DR & (uint8_t)0x007F);
+        }
+      }
+    }
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_READY;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Send an amount of data in non blocking mode.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+  uint32_t  tmp1 = 0;
+
+  tmp1 = hirda->State;
+  if((tmp1 == HAL_IRDA_STATE_READY) || (tmp1 == HAL_IRDA_STATE_BUSY_RX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+
+    hirda->pTxBuffPtr = pData;
+    hirda->TxXferSize = Size;
+    hirda->TxXferCount = Size;
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX;
+    }
+
+   /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_ERR);
+
+    /* Enable the IRDA Transmit Data Register Empty Interrupt */
+    __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TXE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in non blocking mode.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+  uint32_t  tmp1 = 0;
+
+  tmp1 = hirda->State;
+  if((tmp1 == HAL_IRDA_STATE_READY) || (tmp1 == HAL_IRDA_STATE_BUSY_TX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+
+    hirda->pRxBuffPtr = pData;
+    hirda->RxXferSize = Size;
+    hirda->RxXferCount = Size;
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_RX;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    /* Enable the IRDA Data Register not empty Interrupt */
+    __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_RXNE);
+
+    /* Enable the IRDA Parity Error Interrupt */
+    __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_PE);
+
+    /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_ERR);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Sends an amount of data in non blocking mode.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  uint32_t  tmp1 = 0;
+
+  tmp1 = hirda->State;
+  if((tmp1 == HAL_IRDA_STATE_READY) || (tmp1 == HAL_IRDA_STATE_BUSY_RX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+
+    hirda->pTxBuffPtr = pData;
+    hirda->TxXferSize = Size;
+    hirda->TxXferCount = Size;
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+    if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX;
+    }
+
+    /* Set the IRDA DMA transfer complete callback */
+    hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt;
+
+    /* Set the IRDA DMA half transfer complete callback */
+    hirda->hdmatx->XferHalfCpltCallback = IRDA_DMATransmitHalfCplt;
+
+    /* Set the DMA error callback */
+    hirda->hdmatx->XferErrorCallback = IRDA_DMAError;
+
+    /* Enable the IRDA transmit DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hirda->hdmatx, *(uint32_t*)tmp, (uint32_t)&hirda->Instance->DR, Size);
+
+    /* Clear the TC flag in the SR register by writing 0 to it */
+    __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_FLAG_TC);
+
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the USART CR3 register */
+    hirda->Instance->CR3 |= USART_CR3_DMAT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in non blocking mode.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @note   When the IRDA parity is enabled (PCE = 1) the data received contain the parity bit.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  uint32_t  tmp1 = 0;
+
+  tmp1 = hirda->State;
+  if((tmp1 == HAL_IRDA_STATE_READY) || (tmp1 == HAL_IRDA_STATE_BUSY_TX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+
+    hirda->pRxBuffPtr = pData;
+    hirda->RxXferSize = Size;
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_RX;
+    }
+
+    /* Set the IRDA DMA transfer complete callback */
+    hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt;
+
+    /* Set the IRDA DMA half transfer complete callback */
+    hirda->hdmarx->XferHalfCpltCallback = IRDA_DMAReceiveHalfCplt;
+
+    /* Set the DMA error callback */
+    hirda->hdmarx->XferErrorCallback = IRDA_DMAError;
+
+    /* Enable the DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->DR, *(uint32_t*)tmp, Size);
+
+    /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+       in the USART CR3 register */
+    hirda->Instance->CR3 |= USART_CR3_DMAR;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Pauses the DMA Transfer.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda)
+{
+  /* Process Locked */
+  __HAL_LOCK(hirda);
+
+  if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
+  {
+    /* Disable the UART DMA Tx request */
+    hirda->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+  }
+  else if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
+  {
+    /* Disable the UART DMA Rx request */
+    hirda->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+  }
+  else if (hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+  {
+    /* Disable the UART DMA Tx & Rx requests */
+    hirda->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+    hirda->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+  }
+  else
+  {
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    return HAL_ERROR;
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hirda);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the DMA Transfer.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda)
+{
+  /* Process Locked */
+  __HAL_LOCK(hirda);
+
+  if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
+  {
+    /* Enable the UART DMA Tx request */
+    hirda->Instance->CR3 |= USART_CR3_DMAT;
+  }
+  else if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
+  {
+    /* Clear the Overrun flag before resuming the Rx transfer */
+    __HAL_IRDA_CLEAR_OREFLAG(hirda);
+    /* Enable the UART DMA Rx request */
+    hirda->Instance->CR3 |= USART_CR3_DMAR;
+  }
+  else if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+  {
+    /* Clear the Overrun flag before resuming the Rx transfer */
+    __HAL_IRDA_CLEAR_OREFLAG(hirda);
+    /* Enable the UART DMA Tx & Rx request */
+    hirda->Instance->CR3 |= USART_CR3_DMAT;
+    hirda->Instance->CR3 |= USART_CR3_DMAR;
+  }
+  else
+  {
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    return HAL_ERROR;
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hirda);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Stops the DMA Transfer.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda)
+{
+  /* The Lock is not implemented on this API to allow the user application
+     to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback():
+     when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+     and the correspond call back is executed HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback()
+     */
+
+  /* Disable the UART Tx/Rx DMA requests */
+  hirda->Instance->CR3 &= ~USART_CR3_DMAT;
+  hirda->Instance->CR3 &= ~USART_CR3_DMAR;
+
+  /* Abort the UART DMA tx Stream */
+  if(hirda->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(hirda->hdmatx);
+  }
+  /* Abort the UART DMA rx Stream */
+  if(hirda->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(hirda->hdmarx);
+  }
+
+  hirda->State = HAL_IRDA_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles IRDA interrupt request.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda)
+{
+  uint32_t  tmp1 = 0, tmp2 =0;
+
+  tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_PE);
+  tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_PE);
+  /* IRDA parity error interrupt occurred -------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    __HAL_IRDA_CLEAR_PEFLAG(hirda);
+    hirda->ErrorCode |= HAL_IRDA_ERROR_PE;
+  }
+
+  tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_FE);
+  tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR);
+  /* IRDA frame error interrupt occurred --------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    __HAL_IRDA_CLEAR_FEFLAG(hirda);
+    hirda->ErrorCode |= HAL_IRDA_ERROR_FE;
+  }
+
+  tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_NE);
+  tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR);
+  /* IRDA noise error interrupt occurred --------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    __HAL_IRDA_CLEAR_NEFLAG(hirda);
+    hirda->ErrorCode |= HAL_IRDA_ERROR_NE;
+  }
+
+  tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_ORE);
+  tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR);
+  /* IRDA Over-Run interrupt occurred -----------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    __HAL_IRDA_CLEAR_OREFLAG(hirda);
+    hirda->ErrorCode |= HAL_IRDA_ERROR_ORE;
+  }
+
+  /* Call the Error call Back in case of Errors */
+  if(hirda->ErrorCode != HAL_IRDA_ERROR_NONE)
+  {
+    /* Set the IRDA state ready to be able to start again the process */
+    hirda->State = HAL_IRDA_STATE_READY;
+    HAL_IRDA_ErrorCallback(hirda);
+  }
+
+  tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_RXNE);
+  tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_RXNE);
+  /* IRDA in mode Receiver ---------------------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    IRDA_Receive_IT(hirda);
+  }
+
+  tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_TXE);
+  tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TXE);
+  /* IRDA in mode Transmitter ------------------------------------------------*/
+  if((tmp1 != RESET) &&(tmp2 != RESET))
+  {
+    IRDA_Transmit_IT(hirda);
+  }
+
+  tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_TC);
+  tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TC);
+  /* IRDA in mode Transmitter (transmission end) -----------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    IRDA_EndTransmit_IT(hirda);
+  }
+}
+
+/**
+  * @brief  Tx Transfer complete callbacks.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+ __weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_IRDA_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tx Half Transfer completed callbacks.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval None
+  */
+ __weak void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_IRDA_TxHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Transfer complete callbacks.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_IRDA_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Half Transfer complete callbacks.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_IRDA_RxHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief IRDA error callbacks.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+ __weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_IRDA_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Exported_Functions_Group3 Peripheral State and Errors functions
+  *  @brief   IRDA State and Errors functions
+  *
+ at verbatim
+  ==============================================================================
+                  ##### Peripheral State and Errors functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to return the State of IrDA
+    communication process and also return Peripheral Errors occurred during communication process
+     (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state of the IrDA peripheral.
+     (+) HAL_IRDA_GetError() check in run-time errors that could be occurred during communication.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the IRDA state.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL state
+  */
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda)
+{
+  return hirda->State;
+}
+
+/**
+  * @brief  Return the IARDA error code
+  * @param  hirda : pointer to a IRDA_HandleTypeDef structure that contains
+  *              the configuration information for the specified IRDA.
+  * @retval IRDA Error Code
+  */
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda)
+{
+  return hirda->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  DMA IRDA transmit process complete callback.
+  * @param  hdma : DMA handle
+  * @retval None
+  */
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  /* DMA Normal mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    hirda->TxXferCount = 0;
+
+    /* Disable the DMA transfer for transmit request by setting the DMAT bit
+       in the IRDA CR3 register */
+    hirda->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAT);
+
+    /* Enable the IRDA Transmit Complete Interrupt */
+    __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TC);
+  }
+  /* DMA Circular mode */
+  else
+  {
+    HAL_IRDA_TxCpltCallback(hirda);
+  }
+}
+
+/**
+  * @brief DMA IRDA receive process half complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_IRDA_TxHalfCpltCallback(hirda);
+}
+
+/**
+  * @brief  DMA IRDA receive process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  /* DMA Normal mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    hirda->RxXferCount = 0;
+
+    /* Disable the DMA transfer for the receiver request by setting the DMAR bit
+       in the IRDA CR3 register */
+    hirda->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAR);
+
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_READY;
+    }
+  }
+
+  HAL_IRDA_RxCpltCallback(hirda);
+}
+
+/**
+  * @brief DMA IRDA receive process half complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_IRDA_RxHalfCpltCallback(hirda);
+}
+
+/**
+  * @brief  DMA IRDA communication error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void IRDA_DMAError(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  hirda->RxXferCount = 0;
+  hirda->TxXferCount = 0;
+  hirda->ErrorCode |= HAL_IRDA_ERROR_DMA;
+  hirda->State= HAL_IRDA_STATE_READY;
+
+  HAL_IRDA_ErrorCallback(hirda);
+}
+
+/**
+  * @brief  This function handles IRDA Communication Timeout.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  Flag: specifies the IRDA flag to check.
+  * @param  Status: The new Flag status (SET or RESET).
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_IRDA_GET_FLAG(hirda, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE);
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+
+          hirda->State= HAL_IRDA_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hirda);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_IRDA_GET_FLAG(hirda, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE);
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+
+          hirda->State= HAL_IRDA_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hirda);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+ /**
+  * @brief  Send an amount of data in non blocking mode.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda)
+{
+  uint16_t* tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = hirda->State;
+  if((tmp1 == HAL_IRDA_STATE_BUSY_TX) || (tmp1 == HAL_IRDA_STATE_BUSY_TX_RX))
+  {
+    if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
+    {
+      tmp = (uint16_t*) hirda->pTxBuffPtr;
+      hirda->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
+      if(hirda->Init.Parity == IRDA_PARITY_NONE)
+      {
+        hirda->pTxBuffPtr += 2;
+      }
+      else
+      {
+        hirda->pTxBuffPtr += 1;
+      }
+    }
+    else
+    {
+      hirda->Instance->DR = (uint8_t)(*hirda->pTxBuffPtr++ & (uint8_t)0x00FF);
+    }
+
+    if(--hirda->TxXferCount == 0)
+    {
+      /* Disable the IRDA Transmit Data Register Empty Interrupt */
+      __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
+
+      /* Enable the IRDA Transmit Complete Interrupt */
+      __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TC);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Wraps up transmission in non blocking mode.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda)
+{
+  /* Disable the IRDA Transmit Complete Interrupt */
+  __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TC);
+
+  /* Check if a receive process is ongoing or not */
+  if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+  {
+    hirda->State = HAL_IRDA_STATE_BUSY_RX;
+  }
+  else
+  {
+    /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+
+    hirda->State = HAL_IRDA_STATE_READY;
+  }
+
+  HAL_IRDA_TxCpltCallback(hirda);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Receives an amount of data in non blocking mode.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda)
+{
+  uint16_t* tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = hirda->State;
+  if((tmp1 == HAL_IRDA_STATE_BUSY_RX) || (tmp1 == HAL_IRDA_STATE_BUSY_TX_RX))
+  {
+    if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
+    {
+      tmp = (uint16_t*) hirda->pRxBuffPtr;
+      if(hirda->Init.Parity == IRDA_PARITY_NONE)
+      {
+        *tmp = (uint16_t)(hirda->Instance->DR & (uint16_t)0x01FF);
+        hirda->pRxBuffPtr += 2;
+      }
+      else
+      {
+        *tmp = (uint16_t)(hirda->Instance->DR & (uint16_t)0x00FF);
+        hirda->pRxBuffPtr += 1;
+      }
+    }
+    else
+    {
+      if(hirda->Init.Parity == IRDA_PARITY_NONE)
+      {
+        *hirda->pRxBuffPtr++ = (uint8_t)(hirda->Instance->DR & (uint8_t)0x00FF);
+      }
+      else
+      {
+        *hirda->pRxBuffPtr++ = (uint8_t)(hirda->Instance->DR & (uint8_t)0x007F);
+      }
+    }
+
+    if(--hirda->RxXferCount == 0)
+    {
+
+      __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE);
+
+      if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+      {
+        hirda->State = HAL_IRDA_STATE_BUSY_TX;
+      }
+      else
+      {
+        /* Disable the IRDA Parity Error Interrupt */
+        __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
+
+        /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+        __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+
+        hirda->State = HAL_IRDA_STATE_READY;
+      }
+      HAL_IRDA_RxCpltCallback(hirda);
+
+      return HAL_OK;
+    }
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Configures the IRDA peripheral.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+static void IRDA_SetConfig(IRDA_HandleTypeDef *hirda)
+{
+  uint32_t tmpreg = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+  assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate));
+  assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength));
+  assert_param(IS_IRDA_PARITY(hirda->Init.Parity));
+  assert_param(IS_IRDA_MODE(hirda->Init.Mode));
+
+  /*-------------------------- IRDA CR2 Configuration ------------------------*/
+  /* Clear STOP[13:12] bits */
+  hirda->Instance->CR2 &= (uint32_t)~((uint32_t)USART_CR2_STOP);
+
+  /*-------------------------- USART CR1 Configuration -----------------------*/
+  tmpreg = hirda->Instance->CR1;
+
+  /* Clear M, PCE, PS, TE and RE bits */
+  tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
+    USART_CR1_RE));
+
+  /* Configure the USART Word Length, Parity and mode:
+     Set the M bits according to hirda->Init.WordLength value
+     Set PCE and PS bits according to hirda->Init.Parity value
+     Set TE and RE bits according to hirda->Init.Mode value */
+  tmpreg |= (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode;
+
+  /* Write to USART CR1 */
+  hirda->Instance->CR1 = (uint32_t)tmpreg;
+
+  /*-------------------------- USART CR3 Configuration -----------------------*/
+  /* Clear CTSE and RTSE bits */
+  hirda->Instance->CR3 &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));
+
+  /*-------------------------- USART BRR Configuration -----------------------*/
+  if((hirda->Instance == USART1) || (hirda->Instance == USART6))
+  {
+    hirda->Instance->BRR = IRDA_BRR(HAL_RCC_GetPCLK2Freq(), hirda->Init.BaudRate);
+  }
+  else
+  {
+    hirda->Instance->BRR = IRDA_BRR(HAL_RCC_GetPCLK1Freq(), hirda->Init.BaudRate);
+  }
+}
+/**
+  * @}
+  */
+
+#endif /* HAL_IRDA_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c
new file mode 100644
index 0000000..7e157f9
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c
@@ -0,0 +1,361 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_iwdg.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   IWDG HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Independent Watchdog (IWDG) peripheral:
+  *           + Initialization and Configuration functions
+  *           + IO operation functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### IWDG Specific features #####
+  ==============================================================================
+    [..]
+    (+) The IWDG can be started by either software or hardware (configurable
+         through option byte).
+
+    (+) The IWDG is clocked by its own dedicated Low-Speed clock (LSI) and
+         thus stays active even if the main clock fails.
+         Once the IWDG is started, the LSI is forced ON and cannot be disabled
+         (LSI cannot be disabled too), and the counter starts counting down from
+         the reset value of 0xFFF. When it reaches the end of count value (0x000)
+         a system reset is generated.
+
+    (+) The IWDG counter should be refreshed at regular intervals, otherwise the
+         watchdog generates an MCU reset when the counter reaches 0.
+
+    (+) The IWDG is implemented in the VDD voltage domain that is still functional
+         in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY).
+         IWDGRST flag in RCC_CSR register can be used to inform when an IWDG
+         reset occurs.
+
+    (+) Min-max timeout value @32KHz (LSI): ~125us / ~32.7s
+         The IWDG timeout may vary due to LSI frequency dispersion. STM32F4xx
+         devices provide the capability to measure the LSI frequency (LSI clock
+         connected internally to TIM5 CH4 input capture). The measured value
+         can be used to have an IWDG timeout with an acceptable accuracy.
+
+
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    If Window option is disabled
+      (+) Use IWDG using HAL_IWDG_Init() function to :
+         (++) Enable write access to IWDG_PR, IWDG_RLR.
+         (++) Configure the IWDG prescaler, counter reload value.
+              This reload value will be loaded in the IWDG counter each time the counter
+              is reloaded, then the IWDG will start counting down from this value.
+    [..]
+      (+) Use IWDG using HAL_IWDG_Start() function to:
+          (++) Reload IWDG counter with value defined in the IWDG_RLR register.
+          (++) Start the IWDG, when the IWDG is used in software mode (no need
+               to enable the LSI, it will be enabled by hardware).
+      (+) Then the application program must refresh the IWDG counter at regular
+          intervals during normal operation to prevent an MCU reset, using
+          HAL_IWDG_Refresh() function.
+    [..]
+    if Window option is enabled:
+
+      (+) Use IWDG using HAL_IWDG_Start() function to enable IWDG downcounter
+      (+) Use IWDG using HAL_IWDG_Init() function to :
+         (++) Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+         (++) Configure the IWDG prescaler, reload value and window value.
+      (+) Then the application program must refresh the IWDG counter at regular
+          intervals during normal operation to prevent an MCU reset, using
+          HAL_IWDG_Refresh() function.
+
+     *** IWDG HAL driver macros list ***
+     ====================================
+     [..]
+       Below the list of most used macros in IWDG HAL driver.
+
+      (+) __HAL_IWDG_START: Enable the IWDG peripheral
+      (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in the reload register
+      (+) __HAL_IWDG_GET_FLAG: Get the selected IWDG's flag status
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup IWDG IWDG
+  * @brief IWDG HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+ /** @addtogroup IWDG_Private_Constants
+  * @{
+  */
+#define IWDG_TIMEOUT_FLAG          ((uint32_t)1000)     /* 1 s */
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Functions IWDG Exported Functions
+  * @{
+  */
+
+/** @defgroup IWDG_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions.
+ *
+ at verbatim
+ ===============================================================================
+          ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the IWDG according to the specified parameters
+          in the IWDG_InitTypeDef and create the associated handle
+      (+) Initialize the IWDG MSP
+      (+) DeInitialize IWDG MSP
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the IWDG according to the specified
+  *         parameters in the IWDG_InitTypeDef and creates the associated handle.
+  * @param  hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+  *                the configuration information for the specified IWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg)
+{
+  /* Check the IWDG handle allocation */
+  if(hiwdg == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance));
+  assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler));
+  assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload));
+
+  if(hiwdg->State == HAL_IWDG_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hiwdg->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_IWDG_MspInit(hiwdg);
+  }
+
+  /* Change IWDG peripheral state */
+  hiwdg->State = HAL_IWDG_STATE_BUSY;
+
+  /* Enable write access to IWDG_PR and IWDG_RLR registers */
+  IWDG_ENABLE_WRITE_ACCESS(hiwdg);
+
+  /* Write to IWDG registers the IWDG_Prescaler & IWDG_Reload values to work with */
+  MODIFY_REG(hiwdg->Instance->PR, IWDG_PR_PR, hiwdg->Init.Prescaler);
+  MODIFY_REG(hiwdg->Instance->RLR, IWDG_RLR_RL, hiwdg->Init.Reload);
+
+  /* Change IWDG peripheral state */
+  hiwdg->State = HAL_IWDG_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the IWDG MSP.
+  * @param  hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+  *                the configuration information for the specified IWDG module.
+  * @retval None
+  */
+__weak void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_IWDG_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions
+ *  @brief   IO operation functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Start the IWDG.
+      (+) Refresh the IWDG.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the IWDG.
+  * @param  hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+  *                the configuration information for the specified IWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg)
+{
+  /* Process Locked */
+  __HAL_LOCK(hiwdg);
+
+    /* Change IWDG peripheral state */
+  hiwdg->State = HAL_IWDG_STATE_BUSY;
+
+  /* Start the IWDG peripheral */
+  __HAL_IWDG_START(hiwdg);
+
+    /* Reload IWDG counter with value defined in the RLR register */
+  __HAL_IWDG_RELOAD_COUNTER(hiwdg);
+
+  /* Change IWDG peripheral state */
+  hiwdg->State = HAL_IWDG_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hiwdg);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Refreshes the IWDG.
+  * @param  hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+  *                the configuration information for the specified IWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hiwdg);
+
+    /* Change IWDG peripheral state */
+  hiwdg->State = HAL_IWDG_STATE_BUSY;
+
+  tickstart = HAL_GetTick();
+
+  /* Wait until RVU flag is RESET */
+  while(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_RVU) != RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > IWDG_TIMEOUT_FLAG)
+    {
+      /* Set IWDG state */
+      hiwdg->State = HAL_IWDG_STATE_TIMEOUT;
+
+       /* Process unlocked */
+      __HAL_UNLOCK(hiwdg);
+
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Reload IWDG counter with value defined in the reload register */
+  __HAL_IWDG_RELOAD_COUNTER(hiwdg);
+
+  /* Change IWDG peripheral state */
+  hiwdg->State = HAL_IWDG_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hiwdg);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Exported_Functions_Group3 Peripheral State functions
+ *  @brief    Peripheral State functions.
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral State functions #####
+ ===============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the IWDG state.
+  * @param  hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+  *                the configuration information for the specified IWDG module.
+  * @retval HAL state
+  */
+HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg)
+{
+  return hiwdg->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_IWDG_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c
new file mode 100644
index 0000000..eb69b1c
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c
@@ -0,0 +1,1191 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_ltdc.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   LTDC HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the LTDC peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State and Errors functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+     (#) Program the required configuration through the following parameters:
+         the LTDC timing, the horizontal and vertical polarity,
+         the pixel clock polarity, Data Enable polarity and the LTDC background color value
+         using HAL_LTDC_Init() function
+
+     (#) Program the required configuration through the following parameters:
+         the pixel format, the blending factors, input alpha value, the window size
+         and the image size using HAL_LTDC_ConfigLayer() function for foreground
+         or/and background layer.
+
+     (#) Optionally, configure and enable the CLUT using HAL_LTDC_ConfigCLUT() and
+         HAL_LTDC_EnableCLUT functions.
+
+     (#) Optionally, enable the Dither using HAL_LTDC_EnableDither().
+
+     (#) Optionally, configure and enable the Color keying using HAL_LTDC_ConfigColorKeying()
+         and HAL_LTDC_EnableColorKeying functions.
+
+     (#) Optionally, configure LineInterrupt using HAL_LTDC_ProgramLineEvent()
+         function
+
+     (#) If needed, reconfigure and change the pixel format value, the alpha value
+         value, the window size, the window position and the layer start address
+         for foreground or/and background layer using respectively the following
+         functions: HAL_LTDC_SetPixelFormat(), HAL_LTDC_SetAlpha(), HAL_LTDC_SetWindowSize(),
+         HAL_LTDC_SetWindowPosition(), HAL_LTDC_SetAddress.
+
+     (#) To control LTDC state you can use the following function: HAL_LTDC_GetState()
+
+     *** LTDC HAL driver macros list ***
+     =============================================
+     [..]
+       Below the list of most used macros in LTDC HAL driver.
+
+      (+) __HAL_LTDC_ENABLE: Enable the LTDC.
+      (+) __HAL_LTDC_DISABLE: Disable the LTDC.
+      (+) __HAL_LTDC_LAYER_ENABLE: Enable the LTDC Layer.
+      (+) __HAL_LTDC_LAYER_DISABLE: Disable the LTDC Layer.
+      (+) __HAL_LTDC_RELOAD_CONFIG: Reload  Layer Configuration.
+      (+) __HAL_LTDC_GET_FLAG: Get the LTDC pending flags.
+      (+) __HAL_LTDC_CLEAR_FLAG: Clear the LTDC pending flags.
+      (+) __HAL_LTDC_ENABLE_IT: Enable the specified LTDC interrupts.
+      (+) __HAL_LTDC_DISABLE_IT: Disable the specified LTDC interrupts.
+      (+) __HAL_LTDC_GET_IT_SOURCE: Check whether the specified LTDC interrupt has occurred or not.
+
+     [..]
+       (@) You can refer to the LTDC HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+/** @defgroup LTDC LTDC
+  * @brief LTDC HAL module driver
+  * @{
+  */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+
+#if defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup LTDC_Exported_Functions LTDC Exported Functions
+  * @{
+  */
+
+/** @defgroup LTDC_Exported_Functions_Group1 Initialization and Configuration functions
+ *  @brief   Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+                ##### Initialization and Configuration functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the LTDC
+      (+) De-initialize the LTDC
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the LTDC according to the specified
+  *         parameters in the LTDC_InitTypeDef and create the associated handle.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc)
+{
+  uint32_t tmp = 0, tmp1 = 0;
+
+  /* Check the LTDC peripheral state */
+  if(hltdc == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check function parameters */
+  assert_param(IS_LTDC_ALL_INSTANCE(hltdc->Instance));
+  assert_param(IS_LTDC_HSYNC(hltdc->Init.HorizontalSync));
+  assert_param(IS_LTDC_VSYNC(hltdc->Init.VerticalSync));
+  assert_param(IS_LTDC_AHBP(hltdc->Init.AccumulatedHBP));
+  assert_param(IS_LTDC_AVBP(hltdc->Init.AccumulatedVBP));
+  assert_param(IS_LTDC_AAH(hltdc->Init.AccumulatedActiveH));
+  assert_param(IS_LTDC_AAW(hltdc->Init.AccumulatedActiveW));
+  assert_param(IS_LTDC_TOTALH(hltdc->Init.TotalHeigh));
+  assert_param(IS_LTDC_TOTALW(hltdc->Init.TotalWidth));
+  assert_param(IS_LTDC_HSPOL(hltdc->Init.HSPolarity));
+  assert_param(IS_LTDC_VSPOL(hltdc->Init.VSPolarity));
+  assert_param(IS_LTDC_DEPOL(hltdc->Init.DEPolarity));
+  assert_param(IS_LTDC_PCPOL(hltdc->Init.PCPolarity));
+
+  if(hltdc->State == HAL_LTDC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hltdc->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_LTDC_MspInit(hltdc);
+  }
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Configures the HS, VS, DE and PC polarity */
+  hltdc->Instance->GCR &= ~(LTDC_GCR_HSPOL | LTDC_GCR_VSPOL | LTDC_GCR_DEPOL | LTDC_GCR_PCPOL);
+  hltdc->Instance->GCR |=  (uint32_t)(hltdc->Init.HSPolarity | hltdc->Init.VSPolarity | \
+  hltdc->Init.DEPolarity | hltdc->Init.PCPolarity);
+
+  /* Sets Synchronization size */
+  hltdc->Instance->SSCR &= ~(LTDC_SSCR_VSH | LTDC_SSCR_HSW);
+  tmp = (hltdc->Init.HorizontalSync << 16);
+  hltdc->Instance->SSCR |= (tmp | hltdc->Init.VerticalSync);
+
+  /* Sets Accumulated Back porch */
+  hltdc->Instance->BPCR &= ~(LTDC_BPCR_AVBP | LTDC_BPCR_AHBP);
+  tmp = (hltdc->Init.AccumulatedHBP << 16);
+  hltdc->Instance->BPCR |= (tmp | hltdc->Init.AccumulatedVBP);
+
+  /* Sets Accumulated Active Width */
+  hltdc->Instance->AWCR &= ~(LTDC_AWCR_AAH | LTDC_AWCR_AAW);
+  tmp = (hltdc->Init.AccumulatedActiveW << 16);
+  hltdc->Instance->AWCR |= (tmp | hltdc->Init.AccumulatedActiveH);
+
+  /* Sets Total Width */
+  hltdc->Instance->TWCR &= ~(LTDC_TWCR_TOTALH | LTDC_TWCR_TOTALW);
+  tmp = (hltdc->Init.TotalWidth << 16);
+  hltdc->Instance->TWCR |= (tmp | hltdc->Init.TotalHeigh);
+
+  /* Sets the background color value */
+  tmp = ((uint32_t)(hltdc->Init.Backcolor.Green) << 8);
+  tmp1 = ((uint32_t)(hltdc->Init.Backcolor.Red) << 16);
+  hltdc->Instance->BCCR &= ~(LTDC_BCCR_BCBLUE | LTDC_BCCR_BCGREEN | LTDC_BCCR_BCRED);
+  hltdc->Instance->BCCR |= (tmp1 | tmp | hltdc->Init.Backcolor.Blue);
+
+  /* Enable the transfer Error interrupt */
+  __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_TE);
+
+  /* Enable the FIFO underrun interrupt */
+  __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_FU);
+
+  /* Enable LTDC by setting LTDCEN bit */
+  __HAL_LTDC_ENABLE(hltdc);
+
+  /* Initialize the error code */
+  hltdc->ErrorCode = HAL_LTDC_ERROR_NONE;
+
+  /* Initialize the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deinitializes the LTDC peripheral registers to their default reset
+  *         values.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval None
+  */
+
+HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc)
+{
+  /* DeInit the low level hardware */
+  HAL_LTDC_MspDeInit(hltdc);
+
+  /* Initialize the error code */
+  hltdc->ErrorCode = HAL_LTDC_ERROR_NONE;
+
+  /* Initialize the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the LTDC MSP.
+  * @param  hltdc : pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval None
+  */
+__weak void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LTDC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the LTDC MSP.
+  * @param  hltdc : pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval None
+  */
+__weak void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LTDC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Exported_Functions_Group2 IO operation functions
+ *  @brief   IO operation functions
+ *
+ at verbatim
+ ===============================================================================
+                      #####  IO operation functions  #####
+ ===============================================================================
+    [..]  This section provides function allowing to:
+      (+) Handle LTDC interrupt request
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Handles LTDC interrupt request.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval HAL status
+  */
+void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc)
+{
+  /* Transfer Error Interrupt management ***************************************/
+  if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_TE) != RESET)
+  {
+    if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_TE) != RESET)
+    {
+      /* Disable the transfer Error interrupt */
+      __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_TE);
+
+      /* Clear the transfer error flag */
+      __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_TE);
+
+      /* Update error code */
+      hltdc->ErrorCode |= HAL_LTDC_ERROR_TE;
+
+      /* Change LTDC state */
+      hltdc->State = HAL_LTDC_STATE_ERROR;
+
+      /* Process unlocked */
+      __HAL_UNLOCK(hltdc);
+
+      /* Transfer error Callback */
+      HAL_LTDC_ErrorCallback(hltdc);
+    }
+  }
+  /* FIFO underrun Interrupt management ***************************************/
+  if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_FU) != RESET)
+  {
+    if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_FU) != RESET)
+    {
+      /* Disable the FIFO underrun interrupt */
+      __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_FU);
+
+      /* Clear the FIFO underrun flag */
+      __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_FU);
+
+      /* Update error code */
+      hltdc->ErrorCode |= HAL_LTDC_ERROR_FU;
+
+      /* Change LTDC state */
+      hltdc->State = HAL_LTDC_STATE_ERROR;
+
+      /* Process unlocked */
+      __HAL_UNLOCK(hltdc);
+
+      /* Transfer error Callback */
+      HAL_LTDC_ErrorCallback(hltdc);
+    }
+  }
+  /* Line Interrupt management ************************************************/
+  if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_LI) != RESET)
+  {
+    if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_LI) != RESET)
+    {
+      /* Disable the Line interrupt */
+      __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI);
+
+      /* Clear the Line interrupt flag */
+      __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_LI);
+
+      /* Change LTDC state */
+      hltdc->State = HAL_LTDC_STATE_READY;
+
+      /* Process unlocked */
+      __HAL_UNLOCK(hltdc);
+
+      /* Line interrupt Callback */
+      HAL_LTDC_LineEvenCallback(hltdc);
+    }
+  }
+}
+
+/**
+  * @brief  Error LTDC callback.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval None
+  */
+__weak void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LTDC_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Line Event callback.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval None
+  */
+__weak void HAL_LTDC_LineEvenCallback(LTDC_HandleTypeDef *hltdc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LTDC_LineEvenCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief    Peripheral Control functions
+ *
+ at verbatim
+ ===============================================================================
+                    ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Configure the LTDC foreground or/and background parameters.
+      (+) Set the active layer.
+      (+) Configure the color keying.
+      (+) Configure the C-LUT.
+      (+) Enable / Disable the color keying.
+      (+) Enable / Disable the C-LUT.
+      (+) Update the layer position.
+      (+) Update the layer size.
+      (+) Update pixel format on the fly.
+      (+) Update transparency on the fly.
+      (+) Update address on the fly.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configure the LTDC Layer according to the specified
+  *         parameters in the LTDC_InitTypeDef and create the associated handle.
+  * @param  hltdc:     pointer to a LTDC_HandleTypeDef structure that contains
+  *                    the configuration information for the LTDC.
+  * @param  pLayerCfg: pointer to a LTDC_LayerCfgTypeDef structure that contains
+  *                    the configuration information for the Layer.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                    This parameter can be one of the following values:
+  *                    0 or 1
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx)
+{
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+  assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat));
+  assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1));
+  assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2));
+  assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+  assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+  assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+  assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+  assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0));
+  assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth));
+  assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight));
+
+  /* Copy new layer configuration into handle structure */
+  hltdc->LayerCfg[LayerIdx] = *pLayerCfg;
+
+  /* Configure the LTDC Layer */
+  LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Initialize the LTDC state*/
+  hltdc->State  = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the color keying.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  RGBValue: the color key value
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx)
+{
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Configures the default color values */
+  LTDC_LAYER(hltdc, LayerIdx)->CKCR &=  ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED);
+  LTDC_LAYER(hltdc, LayerIdx)->CKCR  = RGBValue;
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Load the color lookup table.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  pCLUT:    pointer to the color lookup table address.
+  * @param  CLUTSize: the color lookup table size.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx)
+{
+  uint32_t tmp = 0;
+  uint32_t counter = 0;
+  uint32_t pcounter = 0;
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  for(counter = 0; (counter < CLUTSize); counter++)
+  {
+    if(hltdc->LayerCfg[LayerIdx].PixelFormat == LTDC_PIXEL_FORMAT_AL44)
+    {
+      tmp  = (((counter + 16*counter) << 24) | ((uint32_t)(*pCLUT) & 0xFF) | ((uint32_t)(*pCLUT) & 0xFF00) | ((uint32_t)(*pCLUT) & 0xFF0000));
+    }
+    else
+    {
+      tmp  = ((counter << 24) | ((uint32_t)(*pCLUT) & 0xFF) | ((uint32_t)(*pCLUT) & 0xFF00) | ((uint32_t)(*pCLUT) & 0xFF0000));
+    }
+    pcounter = (uint32_t)pCLUT + sizeof(*pCLUT);
+    pCLUT = (uint32_t *)pcounter;
+
+    /* Specifies the C-LUT address and RGB value */
+    LTDC_LAYER(hltdc, LayerIdx)->CLUTWR  = tmp;
+  }
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enable the color keying.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Enable LTDC color keying by setting COLKEN bit */
+  LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN;
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the color keying.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Disable LTDC color keying by setting COLKEN bit */
+  LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN;
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enable the color lookup table.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Disable LTDC color lookup table by setting CLUTEN bit */
+  LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN;
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the color lookup table.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Disable LTDC color lookup table by setting CLUTEN bit */
+  LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN;
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables Dither.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval  HAL status
+  */
+
+HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc)
+{
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Enable Dither by setting DTEN bit */
+  LTDC->GCR |= (uint32_t)LTDC_GCR_DTEN;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables Dither.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval  HAL status
+  */
+
+HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc)
+{
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Disable Dither by setting DTEN bit */
+  LTDC->GCR &= ~(uint32_t)LTDC_GCR_DTEN;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the LTDC window size.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  XSize:    LTDC Pixel per line
+  * @param  YSize:    LTDC Line number
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx)
+{
+  LTDC_LayerCfgTypeDef *pLayerCfg;
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Get layer configuration from handle structure */
+  pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+  /* Check the parameters (Layers parameters)*/
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+  assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+  assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+  assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+  assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+  assert_param(IS_LTDC_CFBLL(XSize));
+  assert_param(IS_LTDC_CFBLNBR(YSize));
+
+  /* update horizontal start/stop */
+  pLayerCfg->WindowX0 = 0;
+  pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0;
+
+  /* update vertical start/stop */
+  pLayerCfg->WindowY0 = 0;
+  pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0;
+
+  /* Reconfigures the color frame buffer pitch in byte */
+  pLayerCfg->ImageWidth = XSize;
+
+  /* Reconfigures the frame buffer line number */
+  pLayerCfg->ImageHeight = YSize;
+
+  /* Set LTDC parameters */
+  LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the LTDC window position.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  X0:       LTDC window X offset
+  * @param  Y0:       LTDC window Y offset
+  * @param  LayerIdx:  LTDC Layer index.
+  *                         This parameter can be one of the following values:
+  *                         0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx)
+{
+  LTDC_LayerCfgTypeDef *pLayerCfg;
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Get layer configuration from handle structure */
+  pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+  assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+  assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+  assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+  assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+
+  /* update horizontal start/stop */
+  pLayerCfg->WindowX0 = X0;
+  pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth;
+
+  /* update vertical start/stop */
+  pLayerCfg->WindowY0 = Y0;
+  pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight;
+
+  /* Set LTDC parameters */
+  LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reconfigure the pixel format.
+  * @param  hltdc:       pointer to a LTDC_HandleTypeDef structure that contains
+  *                      the configuration information for the LTDC.
+  * @param  Pixelformat: new pixel format value.
+  * @param  LayerIdx:    LTDC Layer index.
+  *                      This parameter can be one of the following values:
+  *                      0 or 1.
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx)
+{
+  LTDC_LayerCfgTypeDef *pLayerCfg;
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+  assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat));
+
+  /* Get layer configuration from handle structure */
+  pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+  /* Reconfigure the pixel format */
+  pLayerCfg->PixelFormat = Pixelformat;
+
+  /* Set LTDC parameters */
+  LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reconfigure the layer alpha value.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  Alpha:    new alpha value.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx)
+{
+  LTDC_LayerCfgTypeDef *pLayerCfg;
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_ALPHA(Alpha));
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Get layer configuration from handle structure */
+  pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+  /* Reconfigure the Alpha value */
+  pLayerCfg->Alpha = Alpha;
+
+  /* Set LTDC parameters */
+  LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+/**
+  * @brief  Reconfigure the frame buffer Address.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  Address:  new address value.
+  * @param  LayerIdx: LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1.
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx)
+{
+  LTDC_LayerCfgTypeDef *pLayerCfg;
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Get layer configuration from handle structure */
+  pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+  /* Reconfigure the Address */
+  pLayerCfg->FBStartAdress = Address;
+
+  /* Set LTDC parameters */
+  LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Define the position of the line interrupt .
+  * @param  hltdc:             pointer to a LTDC_HandleTypeDef structure that contains
+  *                            the configuration information for the LTDC.
+  * @param  Line:   Line Interrupt Position.
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line)
+{
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LIPOS(Line));
+
+  /* Enable the Line interrupt */
+  __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_LI);
+
+  /* Sets the Line Interrupt position */
+  LTDC->LIPCR = (uint32_t)Line;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Exported_Functions_Group4 Peripheral State and Errors functions
+ *  @brief    Peripheral State and Errors functions
+ *
+ at verbatim
+ ===============================================================================
+                  ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Check the LTDC state.
+      (+) Get error code.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the LTDC state
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval HAL state
+  */
+HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc)
+{
+  return hltdc->State;
+}
+
+/**
+* @brief  Return the LTDC error code
+* @param  hltdc : pointer to a LTDC_HandleTypeDef structure that contains
+  *               the configuration information for the LTDC.
+* @retval LTDC Error Code
+*/
+uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc)
+{
+  return hltdc->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  Configures the LTDC peripheral
+  * @param  hltdc   :  Pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  pLayerCfg: Pointer LTDC Layer Configuration structure
+  * @param  LayerIdx:  LTDC Layer index.
+  *                    This parameter can be one of the following values: 0 or 1
+  * @retval None
+  */
+static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx)
+{
+  uint32_t tmp = 0;
+  uint32_t tmp1 = 0;
+  uint32_t tmp2 = 0;
+
+  /* Configures the horizontal start and stop position */
+  tmp = ((pLayerCfg->WindowX1 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16)) << 16);
+  LTDC_LAYER(hltdc, LayerIdx)->WHPCR &= ~(LTDC_LxWHPCR_WHSTPOS | LTDC_LxWHPCR_WHSPPOS);
+  LTDC_LAYER(hltdc, LayerIdx)->WHPCR = ((pLayerCfg->WindowX0 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16) + 1) | tmp);
+
+  /* Configures the vertical start and stop position */
+  tmp = ((pLayerCfg->WindowY1 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP)) << 16);
+  LTDC_LAYER(hltdc, LayerIdx)->WVPCR &= ~(LTDC_LxWVPCR_WVSTPOS | LTDC_LxWVPCR_WVSPPOS);
+  LTDC_LAYER(hltdc, LayerIdx)->WVPCR  = ((pLayerCfg->WindowY0 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP) + 1) | tmp);
+
+  /* Specifies the pixel format */
+  LTDC_LAYER(hltdc, LayerIdx)->PFCR &= ~(LTDC_LxPFCR_PF);
+  LTDC_LAYER(hltdc, LayerIdx)->PFCR = (pLayerCfg->PixelFormat);
+
+  /* Configures the default color values */
+  tmp = ((uint32_t)(pLayerCfg->Backcolor.Green) << 8);
+  tmp1 = ((uint32_t)(pLayerCfg->Backcolor.Red) << 16);
+  tmp2 = (pLayerCfg->Alpha0 << 24);
+  LTDC_LAYER(hltdc, LayerIdx)->DCCR &= ~(LTDC_LxDCCR_DCBLUE | LTDC_LxDCCR_DCGREEN | LTDC_LxDCCR_DCRED | LTDC_LxDCCR_DCALPHA);
+  LTDC_LAYER(hltdc, LayerIdx)->DCCR = (pLayerCfg->Backcolor.Blue | tmp | tmp1 | tmp2);
+
+  /* Specifies the constant alpha value */
+  LTDC_LAYER(hltdc, LayerIdx)->CACR &= ~(LTDC_LxCACR_CONSTA);
+  LTDC_LAYER(hltdc, LayerIdx)->CACR = (pLayerCfg->Alpha);
+
+  /* Specifies the blending factors */
+  LTDC_LAYER(hltdc, LayerIdx)->BFCR &= ~(LTDC_LxBFCR_BF2 | LTDC_LxBFCR_BF1);
+  LTDC_LAYER(hltdc, LayerIdx)->BFCR = (pLayerCfg->BlendingFactor1 | pLayerCfg->BlendingFactor2);
+
+  /* Configures the color frame buffer start address */
+  LTDC_LAYER(hltdc, LayerIdx)->CFBAR &= ~(LTDC_LxCFBAR_CFBADD);
+  LTDC_LAYER(hltdc, LayerIdx)->CFBAR = (pLayerCfg->FBStartAdress);
+
+  if(pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB8888)
+  {
+    tmp = 4;
+  }
+  else if (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB888)
+  {
+    tmp = 3;
+  }
+  else if((pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \
+    (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB565)   || \
+      (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \
+        (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_AL88))
+  {
+    tmp = 2;
+  }
+  else
+  {
+    tmp = 1;
+  }
+
+  /* Configures the color frame buffer pitch in byte */
+  LTDC_LAYER(hltdc, LayerIdx)->CFBLR  &= ~(LTDC_LxCFBLR_CFBLL | LTDC_LxCFBLR_CFBP);
+  LTDC_LAYER(hltdc, LayerIdx)->CFBLR  = (((pLayerCfg->ImageWidth * tmp) << 16) | (((pLayerCfg->WindowX1 - pLayerCfg->WindowX0) * tmp)  + 3));
+
+  /* Configures the frame buffer line number */
+  LTDC_LAYER(hltdc, LayerIdx)->CFBLNR  &= ~(LTDC_LxCFBLNR_CFBLNBR);
+  LTDC_LAYER(hltdc, LayerIdx)->CFBLNR  = (pLayerCfg->ImageHeight);
+
+  /* Enable LTDC_Layer by setting LEN bit */
+  LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_LEN;
+}
+
+/**
+  * @}
+  */
+#endif /* STM32F429xx || STM32F439xx */
+#endif /* HAL_LTDC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c
new file mode 100644
index 0000000..62e8973
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c
@@ -0,0 +1,119 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_msp_template.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   This file contains the HAL System and Peripheral (PPP) MSP initialization
+  *          and de-initialization functions.
+  *          It should be copied to the application folder and renamed into 'stm32f4xx_hal_msp.c'.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HAL_MSP HAL MSP
+  * @brief HAL MSP module.
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_MSP_Private_Functions HAL MSP Private Functions
+  * @{
+  */
+
+/**
+  * @brief  Initializes the Global MSP.
+  * @note   This function is called from HAL_Init() function to perform system
+  *         level initialization (GPIOs, clock, DMA, interrupt).
+  * @retval None
+  */
+void HAL_MspInit(void)
+{
+
+}
+
+/**
+  * @brief  DeInitializes the Global MSP.
+  * @note   This functiona is called from HAL_DeInit() function to perform system
+  *         level de-initialization (GPIOs, clock, DMA, interrupt).
+  * @retval None
+  */
+void HAL_MspDeInit(void)
+{
+
+}
+
+/**
+  * @brief  Initializes the PPP MSP.
+  * @note   This functiona is called from HAL_PPP_Init() function to perform
+  *         peripheral(PPP) system level initialization (GPIOs, clock, DMA, interrupt)
+  * @retval None
+  */
+void HAL_PPP_MspInit(void)
+{
+
+}
+
+/**
+  * @brief  DeInitializes the PPP MSP.
+  * @note   This functiona is called from HAL_PPP_DeInit() function to perform
+  *         peripheral(PPP) system level de-initialization (GPIOs, clock, DMA, interrupt)
+  * @retval None
+  */
+void HAL_PPP_MspDeInit(void)
+{
+
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c
new file mode 100644
index 0000000..4b0a4dc
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c
@@ -0,0 +1,1125 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_nand.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   NAND HAL module driver.
+  *          This file provides a generic firmware to drive NAND memories mounted
+  *          as external device.
+  *
+  @verbatim
+  ==============================================================================
+                         ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      This driver is a generic layered driver which contains a set of APIs used to
+      control NAND flash memories. It uses the FMC/FSMC layer functions to interface
+      with NAND devices. This driver is used as follows:
+
+      (+) NAND flash memory configuration sequence using the function HAL_NAND_Init()
+          with control and timing parameters for both common and attribute spaces.
+
+      (+) Read NAND flash memory maker and device IDs using the function
+          HAL_NAND_Read_ID(). The read information is stored in the NAND_ID_TypeDef
+          structure declared by the function caller.
+
+      (+) Access NAND flash memory by read/write operations using the functions
+          HAL_NAND_Read_Page()/HAL_NAND_Read_SpareArea(), HAL_NAND_Write_Page()/HAL_NAND_Write_SpareArea()
+          to read/write page(s)/spare area(s). These functions use specific device
+          information (Block, page size..) predefined by the user in the HAL_NAND_Info_TypeDef
+          structure. The read/write address information is contained by the Nand_Address_Typedef
+          structure passed as parameter.
+
+      (+) Perform NAND flash Reset chip operation using the function HAL_NAND_Reset().
+
+      (+) Perform NAND flash erase block operation using the function HAL_NAND_Erase_Block().
+          The erase block address information is contained in the Nand_Address_Typedef
+          structure passed as parameter.
+
+      (+) Read the NAND flash status operation using the function HAL_NAND_Read_Status().
+
+      (+) You can also control the NAND device by calling the control APIs HAL_NAND_ECC_Enable()/
+          HAL_NAND_ECC_Disable() to respectively enable/disable the ECC code correction
+          feature or the function HAL_NAND_GetECC() to get the ECC correction code.
+
+      (+) You can monitor the NAND device HAL state by calling the function
+          HAL_NAND_GetState()
+
+    [..]
+      (@) This driver is a set of generic APIs which handle standard NAND flash operations.
+          If a NAND flash device contains different operations and/or implementations,
+          it should be implemented separately.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+
+#ifdef HAL_NAND_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx)
+
+/** @defgroup NAND NAND
+  * @brief NAND HAL module driver
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup NAND_Private_Constants NAND Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup NAND_Private_Macros NAND Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup NAND_Exported_Functions NAND Exported Functions
+  * @{
+  */
+
+/** @defgroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief    Initialization and Configuration functions
+  *
+  @verbatim
+  ==============================================================================
+            ##### NAND Initialization and de-initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to initialize/de-initialize
+    the NAND memory
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Perform NAND memory Initialization sequence
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  ComSpace_Timing: pointer to Common space timing structure
+  * @param  AttSpace_Timing: pointer to Attribute space timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing)
+{
+  /* Check the NAND handle state */
+  if(hnand == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  if(hnand->State == HAL_NAND_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hnand->Lock = HAL_UNLOCKED;
+    /* Initialize the low level hardware (MSP) */
+    HAL_NAND_MspInit(hnand);
+  }
+
+  /* Initialize NAND control Interface */
+  FMC_NAND_Init(hnand->Instance, &(hnand->Init));
+
+  /* Initialize NAND common space timing Interface */
+  FMC_NAND_CommonSpace_Timing_Init(hnand->Instance, ComSpace_Timing, hnand->Init.NandBank);
+
+  /* Initialize NAND attribute space timing Interface */
+  FMC_NAND_AttributeSpace_Timing_Init(hnand->Instance, AttSpace_Timing, hnand->Init.NandBank);
+
+  /* Enable the NAND device */
+  __FMC_NAND_ENABLE(hnand->Instance, hnand->Init.NandBank);
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Perform NAND memory De-Initialization sequence
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand)
+{
+  /* Initialize the low level hardware (MSP) */
+  HAL_NAND_MspDeInit(hnand);
+
+  /* Configure the NAND registers with their reset values */
+  FMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank);
+
+  /* Reset the NAND controller state */
+  hnand->State = HAL_NAND_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hnand);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  NAND MSP Init
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval None
+  */
+__weak void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NAND_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  NAND MSP DeInit
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval None
+  */
+__weak void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NAND_MspDeInit could be implemented in the user file
+   */
+}
+
+
+/**
+  * @brief  This function handles NAND device interrupt request.
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval HAL status
+*/
+void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand)
+{
+  /* Check NAND interrupt Rising edge flag */
+  if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE))
+  {
+    /* NAND interrupt callback*/
+    HAL_NAND_ITCallback(hnand);
+
+    /* Clear NAND interrupt Rising edge pending bit */
+    __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE);
+  }
+
+  /* Check NAND interrupt Level flag */
+  if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL))
+  {
+    /* NAND interrupt callback*/
+    HAL_NAND_ITCallback(hnand);
+
+    /* Clear NAND interrupt Level pending bit */
+    __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL);
+  }
+
+  /* Check NAND interrupt Falling edge flag */
+  if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE))
+  {
+    /* NAND interrupt callback*/
+    HAL_NAND_ITCallback(hnand);
+
+    /* Clear NAND interrupt Falling edge pending bit */
+    __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE);
+  }
+
+  /* Check NAND interrupt FIFO empty flag */
+  if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT))
+  {
+    /* NAND interrupt callback*/
+    HAL_NAND_ITCallback(hnand);
+
+    /* Clear NAND interrupt FIFO empty pending bit */
+    __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT);
+  }
+
+}
+
+/**
+  * @brief  NAND interrupt feature callback
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval None
+  */
+__weak void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NAND_ITCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup NAND_Exported_Functions_Group2 Input and Output functions
+  * @brief    Input Output and memory control functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### NAND Input and Output functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to use and control the NAND
+    memory
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Read the NAND memory electronic signature
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  pNAND_ID: NAND ID structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID)
+{
+  __IO uint32_t data = 0;
+  uint32_t deviceaddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnand);
+
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Identify the device address */
+  if(hnand->Init.NandBank == FMC_NAND_BANK2)
+  {
+    deviceaddress = NAND_DEVICE1;
+  }
+  else
+  {
+    deviceaddress = NAND_DEVICE2;
+  }
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+
+  /* Send Read ID command sequence */
+  *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA))  = NAND_CMD_READID;
+  *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
+
+  /* Read the electronic signature from NAND flash */
+  data = *(__IO uint32_t *)deviceaddress;
+
+  /* Return the data read */
+  pNAND_ID->Maker_Id   = ADDR_1ST_CYCLE(data);
+  pNAND_ID->Device_Id  = ADDR_2ND_CYCLE(data);
+  pNAND_ID->Third_Id   = ADDR_3RD_CYCLE(data);
+  pNAND_ID->Fourth_Id  = ADDR_4TH_CYCLE(data);
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  NAND memory reset
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand)
+{
+  uint32_t deviceaddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnand);
+
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Identify the device address */
+  if(hnand->Init.NandBank == FMC_NAND_BANK2)
+  {
+    deviceaddress = NAND_DEVICE1;
+  }
+  else
+  {
+    deviceaddress = NAND_DEVICE2;
+  }
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+
+  /* Send NAND reset command */
+  *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = 0xFF;
+
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);
+
+  return HAL_OK;
+
+}
+
+/**
+  * @brief  Read Page(s) from NAND memory block
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  pAddress : pointer to NAND address structure
+  * @param  pBuffer : pointer to destination read buffer
+  * @param  NumPageToRead : number of pages to read from block
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead)
+{
+  __IO uint32_t index  = 0;
+  uint32_t deviceaddress = 0, size = 0, numpagesread = 0, addressstatus = NAND_VALID_ADDRESS;
+  NAND_AddressTypeDef nandaddress;
+  uint32_t addressoffset = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnand);
+
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Identify the device address */
+  if(hnand->Init.NandBank == FMC_NAND_BANK2)
+  {
+    deviceaddress = NAND_DEVICE1;
+  }
+  else
+  {
+    deviceaddress = NAND_DEVICE2;
+  }
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+
+  /* Save the content of pAddress as it will be modified */
+  nandaddress.Block     = pAddress->Block;
+  nandaddress.Page      = pAddress->Page;
+  nandaddress.Zone      = pAddress->Zone;
+
+  /* Page(s) read loop */
+  while((NumPageToRead != 0) && (addressstatus == NAND_VALID_ADDRESS))
+  {
+    /* update the buffer size */
+    size = hnand->Info.PageSize + ((hnand->Info.PageSize) * numpagesread);
+
+    /* Get the address offset */
+    addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
+
+    /* Send read page command sequence */
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
+
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
+
+    /* for 512 and 1 GB devices, 4th cycle is required */
+    if(hnand->Info.BlockNbr >= 1024)
+    {
+      *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
+    }
+
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA))  = NAND_CMD_AREA_TRUE1;
+
+    /* Get Data into Buffer */
+    for(index = size; index != 0; index--)
+    {
+      *(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress;
+    }
+
+    /* Increment read pages number */
+    numpagesread++;
+
+    /* Decrement pages to read */
+    NumPageToRead--;
+
+    /* Increment the NAND address */
+    addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
+  }
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);
+
+  return HAL_OK;
+
+}
+
+/**
+  * @brief  Write Page(s) to NAND memory block
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  pAddress : pointer to NAND address structure
+  * @param  pBuffer : pointer to source buffer to write
+  * @param  NumPageToWrite  : number of pages to write to block
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite)
+{
+  __IO uint32_t index   = 0;
+  uint32_t tickstart = 0;
+  uint32_t deviceaddress = 0 , size = 0, numpageswritten = 0, addressstatus = NAND_VALID_ADDRESS;
+  NAND_AddressTypeDef nandaddress;
+  uint32_t addressoffset = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnand);
+
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Identify the device address */
+  if(hnand->Init.NandBank == FMC_NAND_BANK2)
+  {
+    deviceaddress = NAND_DEVICE1;
+  }
+  else
+  {
+    deviceaddress = NAND_DEVICE2;
+  }
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+
+  /* Save the content of pAddress as it will be modified */
+  nandaddress.Block     = pAddress->Block;
+  nandaddress.Page      = pAddress->Page;
+  nandaddress.Zone      = pAddress->Zone;
+
+  /* Page(s) write loop */
+  while((NumPageToWrite != 0) && (addressstatus == NAND_VALID_ADDRESS))
+  {
+    /* update the buffer size */
+    size = hnand->Info.PageSize + ((hnand->Info.PageSize) * numpageswritten);
+
+    /* Get the address offset */
+    addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
+
+    /* Send write page command sequence */
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
+
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
+
+    /* for 512 and 1 GB devices, 4th cycle is required */
+    if(hnand->Info.BlockNbr >= 1024)
+    {
+      *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
+    }
+
+    /* Write data to memory */
+    for(index = size; index != 0; index--)
+    {
+      *(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++;
+    }
+
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Read status until NAND is ready */
+    while(HAL_NAND_Read_Status(hnand) != NAND_READY)
+    {
+      if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Increment written pages number */
+    numpageswritten++;
+
+    /* Decrement pages to write */
+    NumPageToWrite--;
+
+    /* Increment the NAND address */
+    addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
+  }
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Read Spare area(s) from NAND memory
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  pAddress : pointer to NAND address structure
+  * @param  pBuffer: pointer to source buffer to write
+  * @param  NumSpareAreaToRead: Number of spare area to read
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead)
+{
+  __IO uint32_t index   = 0;
+  uint32_t deviceaddress = 0, size = 0, num_spare_area_read = 0, addressstatus = NAND_VALID_ADDRESS;
+  NAND_AddressTypeDef nandaddress;
+  uint32_t addressoffset = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnand);
+
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Identify the device address */
+  if(hnand->Init.NandBank == FMC_NAND_BANK2)
+  {
+    deviceaddress = NAND_DEVICE1;
+  }
+  else
+  {
+    deviceaddress = NAND_DEVICE2;
+  }
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+
+  /* Save the content of pAddress as it will be modified */
+  nandaddress.Block     = pAddress->Block;
+  nandaddress.Page      = pAddress->Page;
+  nandaddress.Zone      = pAddress->Zone;
+
+  /* Spare area(s) read loop */
+  while((NumSpareAreaToRead != 0) && (addressstatus == NAND_VALID_ADDRESS))
+  {
+    /* update the buffer size */
+    size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * num_spare_area_read);
+
+    /* Get the address offset */
+    addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
+
+    /* Send read spare area command sequence */
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
+
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
+
+    /* for 512 and 1 GB devices, 4th cycle is required */
+    if(hnand->Info.BlockNbr >= 1024)
+    {
+      *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
+    }
+
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
+
+    /* Get Data into Buffer */
+    for (index = size ;index != 0; index--)
+    {
+      *(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress;
+    }
+
+    /* Increment read spare areas number */
+    num_spare_area_read++;
+
+    /* Decrement spare areas to read */
+    NumSpareAreaToRead--;
+
+    /* Increment the NAND address */
+    addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
+  }
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Write Spare area(s) to NAND memory
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  pAddress : pointer to NAND address structure
+  * @param  pBuffer : pointer to source buffer to write
+  * @param  NumSpareAreaTowrite  : number of spare areas to write to block
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite)
+{
+  __IO uint32_t index = 0;
+  uint32_t tickstart = 0;
+  uint32_t deviceaddress = 0, size = 0, num_spare_area_written = 0, addressstatus = NAND_VALID_ADDRESS;
+  NAND_AddressTypeDef nandaddress;
+  uint32_t addressoffset = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnand);
+
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Identify the device address */
+  if(hnand->Init.NandBank == FMC_NAND_BANK2)
+  {
+    deviceaddress = NAND_DEVICE1;
+  }
+  else
+  {
+    deviceaddress = NAND_DEVICE2;
+  }
+
+  /* Update the FMC_NAND controller state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+
+  /* Save the content of pAddress as it will be modified */
+  nandaddress.Block     = pAddress->Block;
+  nandaddress.Page      = pAddress->Page;
+  nandaddress.Zone      = pAddress->Zone;
+
+  /* Spare area(s) write loop */
+  while((NumSpareAreaTowrite != 0) && (addressstatus == NAND_VALID_ADDRESS))
+  {
+    /* update the buffer size */
+    size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * num_spare_area_written);
+
+    /* Get the address offset */
+    addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
+
+    /* Send write Spare area command sequence */
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
+
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
+
+    /* for 512 and 1 GB devices, 4th cycle is required */
+    if(hnand->Info.BlockNbr >= 1024)
+    {
+      *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
+    }
+
+    /* Write data to memory */
+    for(; index < size; index++)
+    {
+      *(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++;
+    }
+
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Read status until NAND is ready */
+    while(HAL_NAND_Read_Status(hnand) != NAND_READY)
+    {
+      if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Increment written spare areas number */
+    num_spare_area_written++;
+
+    /* Decrement spare areas to write */
+    NumSpareAreaTowrite--;
+
+    /* Increment the NAND address */
+    addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
+  }
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  NAND memory Block erase
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  pAddress : pointer to NAND address structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
+{
+  uint32_t deviceaddress = 0;
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnand);
+
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Identify the device address */
+  if(hnand->Init.NandBank == FMC_NAND_BANK2)
+  {
+    deviceaddress = NAND_DEVICE1;
+  }
+  else
+  {
+    deviceaddress = NAND_DEVICE2;
+  }
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+
+  /* Send Erase block command sequence */
+  *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE0;
+
+  *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+  *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+  *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+
+  /* for 512 and 1 GB devices, 4th cycle is required */
+  if(hnand->Info.BlockNbr >= 1024)
+  {
+    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+  }
+
+  *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE1;
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Read status until NAND is ready */
+  while(HAL_NAND_Read_Status(hnand) != NAND_READY)
+  {
+    if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
+    {
+      /* Process unlocked */
+      __HAL_UNLOCK(hnand);
+
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  NAND memory read status
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval NAND status
+  */
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand)
+{
+  uint32_t data = 0;
+  uint32_t deviceaddress = 0;
+
+  /* Identify the device address */
+  if(hnand->Init.NandBank == FMC_NAND_BANK2)
+  {
+    deviceaddress = NAND_DEVICE1;
+  }
+  else
+  {
+    deviceaddress = NAND_DEVICE2;
+  }
+
+  /* Send Read status operation command */
+  *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_STATUS;
+
+  /* Read status register data */
+  data = *(__IO uint8_t *)deviceaddress;
+
+  /* Return the status */
+  if((data & NAND_ERROR) == NAND_ERROR)
+  {
+    return NAND_ERROR;
+  }
+  else if((data & NAND_READY) == NAND_READY)
+  {
+    return NAND_READY;
+  }
+
+  return NAND_BUSY;
+}
+
+/**
+  * @brief  Increment the NAND memory address
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param pAddress: pointer to NAND address structure
+  * @retval The new status of the increment address operation. It can be:
+  *           - NAND_VALID_ADDRESS: When the new address is valid address
+  *           - NAND_INVALID_ADDRESS: When the new address is invalid address
+  */
+uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
+{
+  uint32_t status = NAND_VALID_ADDRESS;
+
+  /* Increment page address */
+  pAddress->Page++;
+
+  /* Check NAND address is valid */
+  if(pAddress->Page == hnand->Info.BlockSize)
+  {
+    pAddress->Page = 0;
+    pAddress->Block++;
+
+    if(pAddress->Block == hnand->Info.ZoneSize)
+    {
+      pAddress->Block = 0;
+      pAddress->Zone++;
+
+      if(pAddress->Zone == (hnand->Info.ZoneSize/ hnand->Info.BlockNbr))
+      {
+        status = NAND_INVALID_ADDRESS;
+      }
+    }
+  }
+
+  return (status);
+}
+/**
+  * @}
+  */
+
+/** @defgroup NAND_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief   management functions
+ *
+ at verbatim
+  ==============================================================================
+                         ##### NAND Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the NAND interface.
+
+ at endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Enables dynamically NAND ECC feature.
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand)
+{
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Update the NAND state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+
+  /* Enable ECC feature */
+  FMC_NAND_ECC_Enable(hnand->Instance, hnand->Init.NandBank);
+
+  /* Update the NAND state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically FMC_NAND ECC feature.
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand)
+{
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Update the NAND state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+
+  /* Disable ECC feature */
+  FMC_NAND_ECC_Disable(hnand->Instance, hnand->Init.NandBank);
+
+  /* Update the NAND state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically NAND ECC feature.
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  ECCval: pointer to ECC value
+  * @param  Timeout: maximum timeout to wait
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Update the NAND state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+
+  /* Get NAND ECC value */
+  status = FMC_NAND_GetECC(hnand->Instance, ECCval, hnand->Init.NandBank, Timeout);
+
+  /* Update the NAND state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  return status;
+}
+
+/**
+  * @}
+  */
+
+
+/** @defgroup NAND_Exported_Functions_Group4 Peripheral State functions
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+  ==============================================================================
+                         ##### NAND State functions #####
+  ==============================================================================
+  [..]
+    This subsection permits to get in run-time the status of the NAND controller
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  return the NAND state
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval HAL state
+  */
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand)
+{
+  return hnand->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+          STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+          STM32F446xx */
+
+#endif /* HAL_NAND_MODULE_ENABLED  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c
new file mode 100644
index 0000000..13800c3
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c
@@ -0,0 +1,1007 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_nor.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   NOR HAL module driver.
+  *          This file provides a generic firmware to drive NOR memories mounted
+  *          as external device.
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      This driver is a generic layered driver which contains a set of APIs used to
+      control NOR flash memories. It uses the FMC/FSMC layer functions to interface
+      with NOR devices. This driver is used as follows:
+
+      (+) NOR flash memory configuration sequence using the function HAL_NOR_Init()
+          with control and timing parameters for both normal and extended mode.
+
+      (+) Read NOR flash memory manufacturer code and device IDs using the function
+          HAL_NOR_Read_ID(). The read information is stored in the NOR_ID_TypeDef
+          structure declared by the function caller.
+
+      (+) Access NOR flash memory by read/write data unit operations using the functions
+          HAL_NOR_Read(), HAL_NOR_Program().
+
+      (+) Perform NOR flash erase block/chip operations using the functions
+          HAL_NOR_Erase_Block() and HAL_NOR_Erase_Chip().
+
+      (+) Read the NOR flash CFI (common flash interface) IDs using the function
+          HAL_NOR_Read_CFI(). The read information is stored in the NOR_CFI_TypeDef
+          structure declared by the function caller.
+
+      (+) You can also control the NOR device by calling the control APIs HAL_NOR_WriteOperation_Enable()/
+          HAL_NOR_WriteOperation_Disable() to respectively enable/disable the NOR write operation
+
+      (+) You can monitor the NOR device HAL state by calling the function
+          HAL_NOR_GetState()
+    [..]
+     (@) This driver is a set of generic APIs which handle standard NOR flash operations.
+         If a NOR flash device contains different operations and/or implementations,
+         it should be implemented separately.
+
+     *** NOR HAL driver macros list ***
+     =============================================
+     [..]
+       Below the list of most used macros in NOR HAL driver.
+
+      (+) NOR_WRITE : NOR memory write data to specified address
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup NOR NOR
+  * @brief NOR driver modules
+  * @{
+  */
+#ifdef HAL_NOR_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup NOR_Private_Defines NOR Private Defines
+  * @{
+  */
+
+/* Constants to define address to set to write a command */
+#define NOR_CMD_ADDRESS_FIRST                 (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_FIRST_CFI             (uint16_t)0x0055
+#define NOR_CMD_ADDRESS_SECOND                (uint16_t)0x02AA
+#define NOR_CMD_ADDRESS_THIRD                 (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_FOURTH                (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_FIFTH                 (uint16_t)0x02AA
+#define NOR_CMD_ADDRESS_SIXTH                 (uint16_t)0x0555
+
+/* Constants to define data to program a command */
+#define NOR_CMD_DATA_READ_RESET               (uint16_t)0x00F0
+#define NOR_CMD_DATA_FIRST                    (uint16_t)0x00AA
+#define NOR_CMD_DATA_SECOND                   (uint16_t)0x0055
+#define NOR_CMD_DATA_AUTO_SELECT              (uint16_t)0x0090
+#define NOR_CMD_DATA_PROGRAM                  (uint16_t)0x00A0
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD   (uint16_t)0x0080
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH  (uint16_t)0x00AA
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH   (uint16_t)0x0055
+#define NOR_CMD_DATA_CHIP_ERASE               (uint16_t)0x0010
+#define NOR_CMD_DATA_CFI                      (uint16_t)0x0098
+
+#define NOR_CMD_DATA_BUFFER_AND_PROG          (uint8_t)0x25
+#define NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM  (uint8_t)0x29
+#define NOR_CMD_DATA_BLOCK_ERASE              (uint8_t)0x30
+
+/* Mask on NOR STATUS REGISTER */
+#define NOR_MASK_STATUS_DQ5                   (uint16_t)0x0020
+#define NOR_MASK_STATUS_DQ6                   (uint16_t)0x0040
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup NOR_Exported_Functions NOR Exported Functions
+  * @{
+  */
+
+/** @defgroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief    Initialization and Configuration functions
+  *
+  @verbatim
+  ==============================================================================
+           ##### NOR Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to initialize/de-initialize
+    the NOR memory
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Perform the NOR memory Initialization sequence
+  * @param  hnor: pointer to the NOR handle
+  * @param  Timing: pointer to NOR control timing structure
+  * @param  ExtTiming: pointer to NOR extended mode timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming)
+{
+  /* Check the NOR handle parameter */
+  if(hnor == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  if(hnor->State == HAL_NOR_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hnor->Lock = HAL_UNLOCKED;
+    /* Initialize the low level hardware (MSP) */
+    HAL_NOR_MspInit(hnor);
+  }
+
+  /* Initialize NOR control Interface */
+  FMC_NORSRAM_Init(hnor->Instance, &(hnor->Init));
+
+  /* Initialize NOR timing Interface */
+  FMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank);
+
+  /* Initialize NOR extended mode timing Interface */
+  FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode);
+
+  /* Enable the NORSRAM device */
+  __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank);
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Perform NOR memory De-Initialization sequence
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor)
+{
+  /* De-Initialize the low level hardware (MSP) */
+  HAL_NOR_MspDeInit(hnor);
+
+  /* Configure the NOR registers with their reset values */
+  FMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank);
+
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  NOR MSP Init
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval None
+  */
+__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NOR_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  NOR MSP DeInit
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval None
+  */
+__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NOR_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  NOR BSP Wait for Ready/Busy signal
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  Timeout: Maximum timeout value
+  * @retval None
+  */
+__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NOR_BspWait could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup NOR_Exported_Functions_Group2 Input and Output functions
+  * @brief    Input Output and memory control functions
+  *
+  @verbatim
+  ==============================================================================
+                ##### NOR Input and Output functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to use and control the NOR memory
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Read NOR flash IDs
+  * @param  hnor: pointer to the NOR handle
+  * @param  pNOR_ID : pointer to NOR ID structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID)
+{
+  uint32_t deviceaddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+
+  /* Send read ID command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_AUTO_SELECT);
+
+  /* Read the NOR IDs */
+  pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, MC_ADDRESS);
+  pNOR_ID->Device_Code1      = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, DEVICE_CODE1_ADDR);
+  pNOR_ID->Device_Code2      = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, DEVICE_CODE2_ADDR);
+  pNOR_ID->Device_Code3      = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, DEVICE_CODE3_ADDR);
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the NOR memory to Read mode.
+  * @param  hnor: pointer to the NOR handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor)
+{
+  uint32_t deviceaddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+
+  NOR_WRITE(deviceaddress, NOR_CMD_DATA_READ_RESET);
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Read data from NOR memory
+  * @param  hnor: pointer to the NOR handle
+  * @param  pAddress: pointer to Device address
+  * @param  pData : pointer to read data
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
+{
+  uint32_t deviceaddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+
+  /* Send read data command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE((uint32_t)pAddress, NOR_CMD_DATA_READ_RESET);
+
+  /* Read the data */
+ *pData = *(__IO uint32_t *)(uint32_t)pAddress;
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Program data to NOR memory
+  * @param  hnor: pointer to the NOR handle
+  * @param  pAddress: Device address
+  * @param  pData : pointer to the data to write
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
+{
+  uint32_t deviceaddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+
+  /* Send program data command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM);
+
+  /* Write the data */
+  NOR_WRITE(pAddress, *pData);
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reads a half-word buffer from the NOR memory.
+  * @param  hnor: pointer to the NOR handle
+  * @param  uwAddress: NOR memory internal address to read from.
+  * @param  pData: pointer to the buffer that receives the data read from the
+  *         NOR memory.
+  * @param  uwBufferSize : number of Half word to read.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
+{
+  uint32_t deviceaddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+
+  /* Send read data command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(uwAddress, 0x00F0);
+
+  /* Read buffer */
+  while( uwBufferSize > 0)
+  {
+    *pData++ = *(__IO uint16_t *)uwAddress;
+    uwAddress += 2;
+    uwBufferSize--;
+  }
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Writes a half-word buffer to the NOR memory. This function must be used
+            only with S29GL128P NOR memory.
+  * @param  hnor: pointer to the NOR handle
+  * @param  uwAddress: NOR memory internal start write address
+  * @param  pData: pointer to source data buffer.
+  * @param  uwBufferSize: Size of the buffer to write
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
+{
+  uint16_t * p_currentaddress = (uint16_t *)NULL;
+  uint16_t * p_endaddress = (uint16_t *)NULL;
+  uint32_t lastloadedaddress = 0, deviceaddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+
+  /* Initialize variables */
+  p_currentaddress  = (uint16_t*)((uint32_t)(uwAddress));
+  p_endaddress      = p_currentaddress + (uwBufferSize-1);
+  lastloadedaddress = (uint32_t)(uwAddress);
+
+  /* Issue unlock command sequence */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+
+  /* Write Buffer Load Command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, uwAddress), (uwBufferSize - 1));
+
+  /* Load Data into NOR Buffer */
+  while(p_currentaddress <= p_endaddress)
+  {
+    /* Store last loaded address & data value (for polling) */
+     lastloadedaddress = (uint32_t)p_currentaddress;
+
+    NOR_WRITE(p_currentaddress, *pData++);
+
+    p_currentaddress ++;
+  }
+
+  NOR_WRITE((uint32_t)(lastloadedaddress), NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM);
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+
+}
+
+/**
+  * @brief  Erase the specified block of the NOR memory
+  * @param  hnor: pointer to the NOR handle
+  * @param  BlockAddress : Block to erase address
+  * @param  Address: Device address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address)
+{
+  uint32_t deviceaddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+
+  /* Send block erase command sequence */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+  NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE);
+
+  /* Check the NOR memory status and update the controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+
+}
+
+/**
+  * @brief  Erase the entire NOR chip.
+  * @param  hnor: pointer to the NOR handle
+  * @param  Address : Device address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address)
+{
+  uint32_t deviceaddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+
+  /* Send NOR chip erase command sequence */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SIXTH), NOR_CMD_DATA_CHIP_ERASE);
+
+  /* Check the NOR memory status and update the controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Read NOR flash CFI IDs
+  * @param  hnor: pointer to the NOR handle
+  * @param  pNOR_CFI : pointer to NOR CFI IDs structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI)
+{
+  uint32_t deviceaddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+
+  /* Send read CFI query command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
+
+  /* read the NOR CFI information */
+  pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, CFI1_ADDRESS);
+  pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, CFI2_ADDRESS);
+  pNOR_CFI->CFI_3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, CFI3_ADDRESS);
+  pNOR_CFI->CFI_4 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, CFI4_ADDRESS);
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup NOR_Exported_Functions_Group3 Control functions
+ *  @brief   management functions
+ *
+ at verbatim
+  ==============================================================================
+                        ##### NOR Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the NOR interface.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables dynamically NOR write operation.
+  * @param  hnor: pointer to the NOR handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor)
+{
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Enable write operation */
+  FMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank);
+
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically NOR write operation.
+  * @param  hnor: pointer to the NOR handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor)
+{
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Update the SRAM controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+
+  /* Disable write operation */
+  FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank);
+
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_PROTECTED;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup NOR_Exported_Functions_Group4 State functions
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### NOR State functions #####
+  ==============================================================================
+  [..]
+    This subsection permits to get in run-time the status of the NOR controller
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  return the NOR controller state
+  * @param  hnor: pointer to the NOR handle
+  * @retval NOR controller state
+  */
+HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor)
+{
+  return hnor->State;
+}
+
+/**
+  * @brief  Returns the NOR operation status.
+  * @param  hnor: pointer to the NOR handle
+  * @param  Address: Device address
+  * @param  Timeout: NOR programming Timeout
+  * @retval NOR_Status: The returned value can be: HAL_NOR_STATUS_SUCCESS, HAL_NOR_STATUS_ERROR
+  *         or HAL_NOR_STATUS_TIMEOUT
+  */
+HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout)
+{
+  HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING;
+  uint16_t tmpSR1 = 0, tmpSR2 = 0;
+  uint32_t tickstart = 0;
+
+  /* Poll on NOR memory Ready/Busy signal ------------------------------------*/
+  HAL_NOR_MspWait(hnor, Timeout);
+
+  /* Get the NOR memory operation status -------------------------------------*/
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  while((status != HAL_NOR_STATUS_SUCCESS ) && (status != HAL_NOR_STATUS_TIMEOUT))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        status = HAL_NOR_STATUS_TIMEOUT;
+      }
+    }
+
+    /* Read NOR status register (DQ6 and DQ5) */
+    tmpSR1 = *(__IO uint16_t *)Address;
+    tmpSR2 = *(__IO uint16_t *)Address;
+
+    /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS  */
+    if((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6))
+    {
+      return HAL_NOR_STATUS_SUCCESS ;
+    }
+
+    if((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+    {
+      status = HAL_NOR_STATUS_ONGOING;
+    }
+
+    tmpSR1 = *(__IO uint16_t *)Address;
+    tmpSR2 = *(__IO uint16_t *)Address;
+
+    /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS  */
+    if((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6))
+    {
+      return HAL_NOR_STATUS_SUCCESS;
+    }
+    if((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+    {
+      return HAL_NOR_STATUS_ERROR;
+    }
+  }
+
+  /* Return the operation status */
+  return status;
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx ||\
+          STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+#endif /* HAL_NOR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c
new file mode 100644
index 0000000..290e6fc
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c
@@ -0,0 +1,742 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pccard.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   PCCARD HAL module driver.
+  *          This file provides a generic firmware to drive PCCARD memories mounted
+  *          as external device.
+  *
+  @verbatim
+ ===============================================================================
+                        ##### How to use this driver #####
+ ===============================================================================
+   [..]
+     This driver is a generic layered driver which contains a set of APIs used to
+     control PCCARD/compact flash memories. It uses the FMC/FSMC layer functions
+     to interface with PCCARD devices. This driver is used for:
+
+    (+) PCCARD/Compact Flash memory configuration sequence using the function
+        HAL_PCCARD_Init()/HAL_CF_Init() with control and timing parameters for
+        both common and attribute spaces.
+
+    (+) Read PCCARD/Compact Flash memory maker and device IDs using the function
+        HAL_PCCARD_Read_ID()/HAL_CF_Read_ID(). The read information is stored in
+        the CompactFlash_ID structure declared by the function caller.
+
+    (+) Access PCCARD/Compact Flash memory by read/write operations using the functions
+        HAL_PCCARD_Read_Sector()/ HAL_PCCARD_Write_Sector() -
+        HAL_CF_Read_Sector()/HAL_CF_Write_Sector(), to read/write sector.
+
+    (+) Perform PCCARD/Compact Flash Reset chip operation using the function
+        HAL_PCCARD_Reset()/HAL_CF_Reset.
+
+    (+) Perform PCCARD/Compact Flash erase sector operation using the function
+        HAL_PCCARD_Erase_Sector()/HAL_CF_Erase_Sector.
+
+    (+) Read the PCCARD/Compact Flash status operation using the function
+        HAL_PCCARD_ReadStatus()/HAL_CF_ReadStatus().
+
+    (+) You can monitor the PCCARD/Compact Flash  device HAL state by calling
+        the function HAL_PCCARD_GetState()/HAL_CF_GetState()
+
+   [..]
+     (@) This driver is a set of generic APIs which handle standard PCCARD/compact flash
+         operations. If a PCCARD/Compact Flash device contains different operations
+         and/or implementations, it should be implemented separately.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup PCCARD PCCARD
+  * @brief PCCARD HAL module driver
+  * @{
+  */
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup PCCARD_Private_Defines PCCARD Private Defines
+  * @{
+  */
+#define PCCARD_TIMEOUT_READ_ID                 (uint32_t)0x0000FFFF
+#define PCCARD_TIMEOUT_READ_WRITE_SECTOR       (uint32_t)0x0000FFFF
+#define PCCARD_TIMEOUT_ERASE_SECTOR            (uint32_t)0x00000400
+#define PCCARD_TIMEOUT_STATUS                  (uint32_t)0x01000000
+
+#define PCCARD_STATUS_OK                       (uint8_t)0x58
+#define PCCARD_STATUS_WRITE_OK                 (uint8_t)0x50
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function ----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Functions PCCARD Exported Functions
+  * @{
+  */
+
+/** @defgroup PCCARD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief    Initialization and Configuration functions
+  *
+  @verbatim
+  ==============================================================================
+          ##### PCCARD Initialization and de-initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to initialize/de-initialize
+    the PCCARD memory
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Perform the PCCARD memory Initialization sequence
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @param  ComSpaceTiming: Common space timing structure
+  * @param  AttSpaceTiming: Attribute space timing structure
+  * @param  IOSpaceTiming: IO space timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming)
+{
+  /* Check the PCCARD controller state */
+  if(hpccard == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  if(hpccard->State == HAL_PCCARD_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hpccard->Lock = HAL_UNLOCKED;
+    /* Initialize the low level hardware (MSP) */
+    HAL_PCCARD_MspInit(hpccard);
+  }
+
+  /* Initialize the PCCARD state */
+  hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+  /* Initialize PCCARD control Interface */
+  FMC_PCCARD_Init(hpccard->Instance, &(hpccard->Init));
+
+  /* Init PCCARD common space timing Interface */
+  FMC_PCCARD_CommonSpace_Timing_Init(hpccard->Instance, ComSpaceTiming);
+
+  /* Init PCCARD attribute space timing Interface */
+  FMC_PCCARD_AttributeSpace_Timing_Init(hpccard->Instance, AttSpaceTiming);
+
+  /* Init PCCARD IO space timing Interface */
+  FMC_PCCARD_IOSpace_Timing_Init(hpccard->Instance, IOSpaceTiming);
+
+  /* Enable the PCCARD device */
+  __FMC_PCCARD_ENABLE(hpccard->Instance);
+
+  /* Update the PCCARD state */
+  hpccard->State = HAL_PCCARD_STATE_READY;
+
+  return HAL_OK;
+
+}
+
+/**
+  * @brief  Perform the PCCARD memory De-initialization sequence
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard)
+{
+  /* De-Initialize the low level hardware (MSP) */
+  HAL_PCCARD_MspDeInit(hpccard);
+
+  /* Configure the PCCARD registers with their reset values */
+  FMC_PCCARD_DeInit(hpccard->Instance);
+
+  /* Update the PCCARD controller state */
+  hpccard->State = HAL_PCCARD_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hpccard);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  PCCARD MSP Init
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @retval None
+  */
+__weak void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCCARD_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  PCCARD MSP DeInit
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @retval None
+  */
+__weak void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCCARD_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup PCCARD_Exported_Functions_Group2 Input and Output functions
+  * @brief    Input Output and memory control functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### PCCARD Input and Output functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to use and control the PCCARD memory
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Read Compact Flash's ID.
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @param  CompactFlash_ID: Compact flash ID structure.
+  * @param  pStatus: pointer to compact flash status
+  * @retval HAL status
+  *
+  */
+HAL_StatusTypeDef HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus)
+{
+  uint32_t timeout = PCCARD_TIMEOUT_READ_ID, index = 0;
+  uint8_t status = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hpccard);
+
+  /* Check the PCCARD controller state */
+  if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Update the PCCARD controller state */
+  hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+  /* Initialize the PCCARD status */
+  *pStatus = PCCARD_READY;
+
+  /* Send the Identify Command */
+  *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD)  = 0xECEC;
+
+  /* Read PCCARD IDs and timeout treatment */
+  do
+  {
+     /* Read the PCCARD status */
+     status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+
+     timeout--;
+  }while((status != PCCARD_STATUS_OK) && timeout);
+
+  if(timeout == 0)
+  {
+    *pStatus = PCCARD_TIMEOUT_ERROR;
+  }
+  else
+  {
+     /* Read PCCARD ID bytes */
+    for(index = 0; index < 16; index++)
+    {
+      CompactFlash_ID[index] = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_DATA);
+    }
+  }
+
+  /* Update the PCCARD controller state */
+  hpccard->State = HAL_PCCARD_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hpccard);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Read sector from PCCARD memory
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @param  pBuffer: pointer to destination read buffer
+  * @param  SectorAddress: Sector address to read
+  * @param  pStatus: pointer to PCCARD status
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus)
+{
+  uint32_t timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR, index = 0;
+  uint8_t status = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hpccard);
+
+  /* Check the PCCARD controller state */
+  if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Update the PCCARD controller state */
+  hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+  /* Initialize PCCARD status */
+  *pStatus = PCCARD_READY;
+
+  /* Set the parameters to write a sector */
+  *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = (uint16_t)0x00;
+  *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT)  = ((uint16_t)0x0100 ) | ((uint16_t)SectorAddress);
+  *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD)    = (uint16_t)0xE4A0;
+
+  do
+  {
+    /* wait till the Status = 0x80 */
+    status =  *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+    timeout--;
+  }while((status == 0x80) && timeout);
+
+  if(timeout == 0)
+  {
+    *pStatus = PCCARD_TIMEOUT_ERROR;
+  }
+
+  timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR;
+
+  do
+  {
+    /* wait till the Status = PCCARD_STATUS_OK */
+    status =  *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+    timeout--;
+  }while((status != PCCARD_STATUS_OK) && timeout);
+
+  if(timeout == 0)
+  {
+    *pStatus = PCCARD_TIMEOUT_ERROR;
+  }
+
+  /* Read bytes */
+  for(; index < PCCARD_SECTOR_SIZE; index++)
+  {
+    *(uint16_t *)pBuffer++ = *(uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR);
+  }
+
+  /* Update the PCCARD controller state */
+  hpccard->State = HAL_PCCARD_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hpccard);
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Write sector to PCCARD memory
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @param  pBuffer: pointer to source write buffer
+  * @param  SectorAddress: Sector address to write
+  * @param  pStatus: pointer to PCCARD status
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress,  uint8_t *pStatus)
+{
+  uint32_t timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR, index = 0;
+  uint8_t status = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hpccard);
+
+  /* Check the PCCARD controller state */
+  if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Update the PCCARD controller state */
+  hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+  /* Initialize PCCARD status */
+  *pStatus = PCCARD_READY;
+
+  /* Set the parameters to write a sector */
+  *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = (uint16_t)0x00;
+  *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT)  = ((uint16_t)0x0100 ) | ((uint16_t)SectorAddress);
+  *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD)    = (uint16_t)0x30A0;
+
+  do
+  {
+    /* Wait till the Status = PCCARD_STATUS_OK */
+    status =  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+    timeout--;
+  }while((status != PCCARD_STATUS_OK) && timeout);
+
+  if(timeout == 0)
+  {
+    *pStatus = PCCARD_TIMEOUT_ERROR;
+  }
+
+  /* Write bytes */
+  for(; index < PCCARD_SECTOR_SIZE; index++)
+  {
+    *(uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR) = *(uint16_t *)pBuffer++;
+  }
+
+  do
+  {
+    /* Wait till the Status = PCCARD_STATUS_WRITE_OK */
+    status =  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+    timeout--;
+  }while((status != PCCARD_STATUS_WRITE_OK) && timeout);
+
+  if(timeout == 0)
+  {
+    *pStatus = PCCARD_TIMEOUT_ERROR;
+  }
+
+  /* Update the PCCARD controller state */
+  hpccard->State = HAL_PCCARD_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hpccard);
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Erase sector from PCCARD memory
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @param  SectorAddress: Sector address to erase
+  * @param  pStatus: pointer to PCCARD status
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus)
+{
+  uint32_t timeout = PCCARD_TIMEOUT_ERASE_SECTOR;
+  uint8_t status = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hpccard);
+
+  /* Check the PCCARD controller state */
+  if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Update the PCCARD controller state */
+  hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+  /* Initialize PCCARD status */
+  *pStatus = PCCARD_READY;
+
+  /* Set the parameters to write a sector */
+  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_LOW)  = 0x00;
+  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = 0x00;
+  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_NUMBER) = SectorAddress;
+  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT)  = 0x01;
+  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CARD_HEAD)     = 0xA0;
+  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD)    = ATA_ERASE_SECTOR_CMD;
+
+  /* wait till the PCCARD is ready */
+  status =  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+
+  while((status != PCCARD_STATUS_WRITE_OK) && timeout)
+  {
+    status =  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+    timeout--;
+  }
+
+  if(timeout == 0)
+  {
+    *pStatus = PCCARD_TIMEOUT_ERROR;
+  }
+
+  /* Check the PCCARD controller state */
+  hpccard->State = HAL_PCCARD_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hpccard);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reset the PCCARD memory
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard)
+{
+  /* Process Locked */
+  __HAL_LOCK(hpccard);
+
+  /* Check the PCCARD controller state */
+  if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Provide a SW reset and Read and verify the:
+   - PCCard Configuration Option Register at address 0x98000200 --> 0x80
+   - Card Configuration and Status Register at address 0x98000202 --> 0x00
+   - Pin Replacement Register at address 0x98000204 --> 0x0C
+   - Socket and Copy Register at address 0x98000206 --> 0x00
+  */
+
+  /* Check the PCCARD controller state */
+  hpccard->State = HAL_PCCARD_STATE_BUSY;
+
+  *(__IO uint8_t *)(PCCARD_ATTRIBUTE_SPACE_ADDRESS | ATA_CARD_CONFIGURATION ) = 0x01;
+
+  /* Check the PCCARD controller state */
+  hpccard->State = HAL_PCCARD_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hpccard);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles PCCARD device interrupt request.
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @retval HAL status
+*/
+void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard)
+{
+  /* Check PCCARD interrupt Rising edge flag */
+  if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE))
+  {
+    /* PCCARD interrupt callback*/
+    HAL_PCCARD_ITCallback(hpccard);
+
+    /* Clear PCCARD interrupt Rising edge pending bit */
+    __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE);
+  }
+
+  /* Check PCCARD interrupt Level flag */
+  if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_LEVEL))
+  {
+    /* PCCARD interrupt callback*/
+    HAL_PCCARD_ITCallback(hpccard);
+
+    /* Clear PCCARD interrupt Level pending bit */
+    __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_LEVEL);
+  }
+
+  /* Check PCCARD interrupt Falling edge flag */
+  if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE))
+  {
+    /* PCCARD interrupt callback*/
+    HAL_PCCARD_ITCallback(hpccard);
+
+    /* Clear PCCARD interrupt Falling edge pending bit */
+    __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE);
+  }
+
+  /* Check PCCARD interrupt FIFO empty flag */
+  if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FEMPT))
+  {
+    /* PCCARD interrupt callback*/
+    HAL_PCCARD_ITCallback(hpccard);
+
+    /* Clear PCCARD interrupt FIFO empty pending bit */
+    __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FEMPT);
+  }
+}
+
+/**
+  * @brief  PCCARD interrupt feature callback
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @retval None
+  */
+__weak void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCCARD_ITCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup PCCARD_Exported_Functions_Group3 State functions
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### PCCARD State functions #####
+  ==============================================================================
+  [..]
+    This subsection permits to get in run-time the status of the PCCARD controller
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  return the PCCARD controller state
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @retval HAL state
+  */
+HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard)
+{
+  return hpccard->State;
+}
+
+/**
+  * @brief  Get the compact flash memory status
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @retval New status of the PCCARD operation. This parameter can be:
+  *          - CompactFlash_TIMEOUT_ERROR: when the previous operation generate
+  *            a Timeout error
+  *          - CompactFlash_READY: when memory is ready for the next operation
+  */
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard)
+{
+  uint32_t timeout = PCCARD_TIMEOUT_STATUS, status_pccard = 0;
+
+  /* Check the PCCARD controller state */
+  if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+  {
+     return HAL_PCCARD_STATUS_ONGOING;
+  }
+
+  status_pccard =  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+
+  while((status_pccard == PCCARD_BUSY) && timeout)
+  {
+    status_pccard =  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+    timeout--;
+  }
+
+  if(timeout == 0)
+  {
+    status_pccard =  PCCARD_TIMEOUT_ERROR;
+  }
+
+  /* Return the operation status */
+  return (HAL_PCCARD_StatusTypeDef) status_pccard;
+}
+
+/**
+  * @brief  Reads the Compact Flash memory status using the Read status command
+  * @param  hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
+  *                the configuration information for PCCARD module.
+  * @retval The status of the Compact Flash memory. This parameter can be:
+  *          - CompactFlash_BUSY: when memory is busy
+  *          - CompactFlash_READY: when memory is ready for the next operation
+  *          - CompactFlash_ERROR: when the previous operation generates error
+  */
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard)
+{
+  uint8_t data = 0, status_pccard = PCCARD_BUSY;
+
+  /* Check the PCCARD controller state */
+  if(hpccard->State == HAL_PCCARD_STATE_BUSY)
+  {
+     return HAL_PCCARD_STATUS_ONGOING;
+  }
+
+  /* Read status operation */
+  data =  *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
+
+  if((data & PCCARD_TIMEOUT_ERROR) == PCCARD_TIMEOUT_ERROR)
+  {
+    status_pccard = PCCARD_TIMEOUT_ERROR;
+  }
+  else if((data & PCCARD_READY) == PCCARD_READY)
+  {
+    status_pccard = PCCARD_READY;
+  }
+
+  return (HAL_PCCARD_StatusTypeDef) status_pccard;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+          STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c
new file mode 100644
index 0000000..21c5033
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c
@@ -0,0 +1,1208 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pcd.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   PCD HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the USB Peripheral Controller:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The PCD HAL driver can be used as follows:
+
+     (#) Declare a PCD_HandleTypeDef handle structure, for example:
+         PCD_HandleTypeDef  hpcd;
+
+     (#) Fill parameters of Init structure in HCD handle
+
+     (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...)
+
+     (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API:
+         (##) Enable the PCD/USB Low Level interface clock using
+              (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+              (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode)
+
+         (##) Initialize the related GPIO clocks
+         (##) Configure PCD pin-out
+         (##) Configure PCD NVIC interrupt
+
+     (#)Associate the Upper USB device stack to the HAL PCD Driver:
+         (##) hpcd.pData = pdev;
+
+     (#)Enable PCD transmission and reception:
+         (##) HAL_PCD_Start();
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PCD PCD
+  * @brief PCD HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+  * @{
+  */
+#define PCD_MIN(a, b)  (((a) < (b)) ? (a) : (b))
+#define PCD_MAX(a, b)  (((a) > (b)) ? (a) : (b))
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup PCD_Private_Functions PCD Private Functions
+  * @{
+  */
+static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Functions PCD Exported Functions
+  * @{
+  */
+
+/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+            ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the PCD according to the specified
+  *         parameters in the PCD_InitTypeDef and initialize the associated handle.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd)
+{
+  uint32_t i = 0;
+
+  /* Check the PCD handle allocation */
+  if(hpcd == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance));
+
+  hpcd->State = HAL_PCD_STATE_BUSY;
+
+  /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+  HAL_PCD_MspInit(hpcd);
+
+  /* Disable the Interrupts */
+ __HAL_PCD_DISABLE(hpcd);
+
+ /*Init the Core (common init.) */
+ USB_CoreInit(hpcd->Instance, hpcd->Init);
+
+ /* Force Device Mode*/
+ USB_SetCurrentMode(hpcd->Instance , USB_OTG_DEVICE_MODE);
+
+ /* Init endpoints structures */
+ for (i = 0; i < 15 ; i++)
+ {
+   /* Init ep structure */
+   hpcd->IN_ep[i].is_in = 1;
+   hpcd->IN_ep[i].num = i;
+   hpcd->IN_ep[i].tx_fifo_num = i;
+   /* Control until ep is activated */
+   hpcd->IN_ep[i].type = EP_TYPE_CTRL;
+   hpcd->IN_ep[i].maxpacket =  0;
+   hpcd->IN_ep[i].xfer_buff = 0;
+   hpcd->IN_ep[i].xfer_len = 0;
+ }
+
+ for (i = 0; i < 15 ; i++)
+ {
+   hpcd->OUT_ep[i].is_in = 0;
+   hpcd->OUT_ep[i].num = i;
+   hpcd->IN_ep[i].tx_fifo_num = i;
+   /* Control until ep is activated */
+   hpcd->OUT_ep[i].type = EP_TYPE_CTRL;
+   hpcd->OUT_ep[i].maxpacket = 0;
+   hpcd->OUT_ep[i].xfer_buff = 0;
+   hpcd->OUT_ep[i].xfer_len = 0;
+
+   hpcd->Instance->DIEPTXF[i] = 0;
+ }
+
+ /* Init Device */
+ USB_DevInit(hpcd->Instance, hpcd->Init);
+
+ hpcd->State= HAL_PCD_STATE_READY;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ /* Activate LPM */
+ if (hpcd->Init.lpm_enable == 1)
+ {
+   HAL_PCDEx_ActivateLPM(hpcd);
+ }
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+ USB_DevDisconnect (hpcd->Instance);
+ return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the PCD peripheral.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd)
+{
+  /* Check the PCD handle allocation */
+  if(hpcd == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  hpcd->State = HAL_PCD_STATE_BUSY;
+
+  /* Stop Device */
+  HAL_PCD_Stop(hpcd);
+
+  /* DeInit the low level hardware */
+  HAL_PCD_MspDeInit(hpcd);
+
+  hpcd->State = HAL_PCD_STATE_RESET;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the PCD MSP.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes PCD MSP.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions
+ *  @brief   Data transfers functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the PCD data
+    transfers.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Start The USB OTG Device.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd)
+{
+  __HAL_LOCK(hpcd);
+  USB_DevConnect (hpcd->Instance);
+  __HAL_PCD_ENABLE(hpcd);
+  __HAL_UNLOCK(hpcd);
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop The USB OTG Device.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd)
+{
+  __HAL_LOCK(hpcd);
+  __HAL_PCD_DISABLE(hpcd);
+  USB_StopDevice(hpcd->Instance);
+  USB_DevDisconnect(hpcd->Instance);
+  __HAL_UNLOCK(hpcd);
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles PCD interrupt request.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+  uint32_t i = 0, ep_intr = 0, epint = 0, epnum = 0;
+  uint32_t fifoemptymsk = 0, temp = 0;
+  USB_OTG_EPTypeDef *ep;
+
+  /* ensure that we are in device mode */
+  if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE)
+  {
+    /* avoid spurious interrupt */
+    if(__HAL_PCD_IS_INVALID_INTERRUPT(hpcd))
+    {
+      return;
+    }
+
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS))
+    {
+     /* incorrect mode, acknowledge the interrupt */
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS);
+    }
+
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT))
+    {
+      epnum = 0;
+
+      /* Read in the device interrupt bits */
+      ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance);
+
+      while ( ep_intr )
+      {
+        if (ep_intr & 0x1)
+        {
+          epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, epnum);
+
+          if(( epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC)
+          {
+            CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC);
+
+            if(hpcd->Init.dma_enable == 1)
+            {
+              hpcd->OUT_ep[epnum].xfer_count = hpcd->OUT_ep[epnum].maxpacket- (USBx_OUTEP(epnum)->DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ);
+              hpcd->OUT_ep[epnum].xfer_buff += hpcd->OUT_ep[epnum].maxpacket;
+            }
+
+            HAL_PCD_DataOutStageCallback(hpcd, epnum);
+            if(hpcd->Init.dma_enable == 1)
+            {
+              if((epnum == 0) && (hpcd->OUT_ep[epnum].xfer_len == 0))
+              {
+                 /* this is ZLP, so prepare EP0 for next setup */
+                USB_EP0_OutStart(hpcd->Instance, 1, (uint8_t *)hpcd->Setup);
+              }
+            }
+          }
+
+          if(( epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP)
+          {
+            /* Inform the upper layer that a setup packet is available */
+            HAL_PCD_SetupStageCallback(hpcd);
+            CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP);
+          }
+
+          if(( epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS)
+          {
+            CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS);
+          }
+        }
+        epnum++;
+        ep_intr >>= 1;
+      }
+    }
+
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT))
+    {
+      /* Read in the device interrupt bits */
+      ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance);
+
+      epnum = 0;
+
+      while ( ep_intr )
+      {
+        if (ep_intr & 0x1) /* In ITR */
+        {
+          epint = USB_ReadDevInEPInterrupt(hpcd->Instance, epnum);
+
+           if(( epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC)
+          {
+            fifoemptymsk = 0x1 << epnum;
+            USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
+
+            CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC);
+
+            if (hpcd->Init.dma_enable == 1)
+            {
+              hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket;
+            }
+
+            HAL_PCD_DataInStageCallback(hpcd, epnum);
+
+            if (hpcd->Init.dma_enable == 1)
+            {
+              /* this is ZLP, so prepare EP0 for next setup */
+              if((epnum == 0) && (hpcd->IN_ep[epnum].xfer_len == 0))
+              {
+                /* prepare to rx more setup packets */
+                USB_EP0_OutStart(hpcd->Instance, 1, (uint8_t *)hpcd->Setup);
+              }
+            }
+          }
+           if(( epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC)
+          {
+            CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC);
+          }
+          if(( epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE)
+          {
+            CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE);
+          }
+          if(( epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE)
+          {
+            CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE);
+          }
+          if(( epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD)
+          {
+            CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD);
+          }
+          if(( epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE)
+          {
+            PCD_WriteEmptyTxFifo(hpcd , epnum);
+          }
+        }
+        epnum++;
+        ep_intr >>= 1;
+      }
+    }
+
+    /* Handle Resume Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT))
+    {
+      /* Clear the Remote Wake-up Signaling */
+      USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+      if(hpcd->LPM_State == LPM_L1)
+      {
+        hpcd->LPM_State = LPM_L0;
+        HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE);
+      }
+      else
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+      {
+        HAL_PCD_ResumeCallback(hpcd);
+      }
+
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT);
+    }
+
+    /* Handle Suspend Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP))
+    {
+      if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+      {
+
+        HAL_PCD_SuspendCallback(hpcd);
+      }
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP);
+    }
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+    /* Handle LPM Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT))
+    {
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT);
+      if( hpcd->LPM_State == LPM_L0)
+      {
+        hpcd->LPM_State = LPM_L1;
+        hpcd->BESL = (hpcd->Instance->GLPMCFG & USB_OTG_GLPMCFG_BESL) >>2 ;
+        HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE);
+      }
+      else
+      {
+        HAL_PCD_SuspendCallback(hpcd);
+      }
+    }
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+    /* Handle Reset Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST))
+    {
+      USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
+      USB_FlushTxFifo(hpcd->Instance ,  0 );
+
+      for (i = 0; i < hpcd->Init.dev_endpoints ; i++)
+      {
+        USBx_INEP(i)->DIEPINT = 0xFF;
+        USBx_OUTEP(i)->DOEPINT = 0xFF;
+      }
+      USBx_DEVICE->DAINT = 0xFFFFFFFF;
+      USBx_DEVICE->DAINTMSK |= 0x10001;
+
+      if(hpcd->Init.use_dedicated_ep1)
+      {
+        USBx_DEVICE->DOUTEP1MSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
+        USBx_DEVICE->DINEP1MSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
+      }
+      else
+      {
+        USBx_DEVICE->DOEPMSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
+        USBx_DEVICE->DIEPMSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
+      }
+
+      /* Set Default Address to 0 */
+      USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD;
+
+      /* setup EP0 to receive SETUP packets */
+      USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
+
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST);
+    }
+
+    /* Handle Enumeration done Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE))
+    {
+      USB_ActivateSetup(hpcd->Instance);
+      hpcd->Instance->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT;
+
+      if ( USB_GetDevSpeed(hpcd->Instance) == USB_OTG_SPEED_HIGH)
+      {
+        hpcd->Init.speed            = USB_OTG_SPEED_HIGH;
+        hpcd->Init.ep0_mps          = USB_OTG_HS_MAX_PACKET_SIZE ;
+        hpcd->Instance->GUSBCFG |= (uint32_t)((USBD_HS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT);
+      }
+      else
+      {
+        hpcd->Init.speed            = USB_OTG_SPEED_FULL;
+        hpcd->Init.ep0_mps          = USB_OTG_FS_MAX_PACKET_SIZE ;
+        hpcd->Instance->GUSBCFG |= (uint32_t)((USBD_FS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT);
+      }
+
+      HAL_PCD_ResetCallback(hpcd);
+
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE);
+    }
+
+    /* Handle RxQLevel Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL))
+    {
+      USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+
+      temp = USBx->GRXSTSP;
+
+      ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM];
+
+      if(((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) ==  STS_DATA_UPDT)
+      {
+        if((temp & USB_OTG_GRXSTSP_BCNT) != 0)
+        {
+          USB_ReadPacket(USBx, ep->xfer_buff, (temp & USB_OTG_GRXSTSP_BCNT) >> 4);
+          ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
+          ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
+        }
+      }
+      else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) ==  STS_SETUP_UPDT)
+      {
+        USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8);
+        ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
+      }
+      USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+    }
+
+    /* Handle SOF Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF))
+    {
+      HAL_PCD_SOFCallback(hpcd);
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF);
+    }
+
+    /* Handle Incomplete ISO IN Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR))
+    {
+      HAL_PCD_ISOINIncompleteCallback(hpcd, epnum);
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR);
+    }
+
+    /* Handle Incomplete ISO OUT Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
+    {
+      HAL_PCD_ISOOUTIncompleteCallback(hpcd, epnum);
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
+    }
+
+    /* Handle Connection event Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT))
+    {
+      HAL_PCD_ConnectCallback(hpcd);
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT);
+    }
+
+    /* Handle Disconnection event Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT))
+    {
+      temp = hpcd->Instance->GOTGINT;
+
+      if((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET)
+      {
+        HAL_PCD_DisconnectCallback(hpcd);
+      }
+      hpcd->Instance->GOTGINT |= temp;
+    }
+  }
+}
+
+/**
+  * @brief  Data OUT stage callback.
+  * @param  hpcd: PCD handle
+  * @param  epnum: endpoint number
+  * @retval None
+  */
+ __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_DataOutStageCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Data IN stage callback.
+  * @param  hpcd: PCD handle
+  * @param  epnum: endpoint number
+  * @retval None
+  */
+ __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_DataInStageCallback could be implemented in the user file
+   */
+}
+/**
+  * @brief  Setup stage callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_SetupStageCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  USB Start Of Frame callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_SOFCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  USB Reset callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_ResetCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Suspend event callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_SuspendCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Resume event callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_ResumeCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Incomplete ISO OUT callback.
+  * @param  hpcd: PCD handle
+  * @param  epnum: endpoint number
+  * @retval None
+  */
+ __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Incomplete ISO IN callback.
+  * @param  hpcd: PCD handle
+  * @param  epnum: endpoint number
+  * @retval None
+  */
+ __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Connection event callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_ConnectCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Disconnection event callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_DisconnectCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief   management functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the PCD data
+    transfers.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Connect the USB device.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd)
+{
+  __HAL_LOCK(hpcd);
+  USB_DevConnect(hpcd->Instance);
+  __HAL_UNLOCK(hpcd);
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disconnect the USB device.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd)
+{
+  __HAL_LOCK(hpcd);
+  USB_DevDisconnect(hpcd->Instance);
+  __HAL_UNLOCK(hpcd);
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the USB Device address.
+  * @param  hpcd: PCD handle
+  * @param  address: new device address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address)
+{
+  __HAL_LOCK(hpcd);
+  USB_SetDevAddress(hpcd->Instance, address);
+  __HAL_UNLOCK(hpcd);
+  return HAL_OK;
+}
+/**
+  * @brief  Open and configure an endpoint.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @param  ep_mps: endpoint max packet size
+  * @param  ep_type: endpoint type
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type)
+{
+  HAL_StatusTypeDef  ret = HAL_OK;
+  USB_OTG_EPTypeDef *ep;
+
+  if ((ep_addr & 0x80) == 0x80)
+  {
+    ep = &hpcd->IN_ep[ep_addr & 0x7F];
+  }
+  else
+  {
+    ep = &hpcd->OUT_ep[ep_addr & 0x7F];
+  }
+  ep->num   = ep_addr & 0x7F;
+
+  ep->is_in = (0x80 & ep_addr) != 0;
+  ep->maxpacket = ep_mps;
+  ep->type = ep_type;
+  if (ep->is_in)
+  {
+    /* Assign a Tx FIFO */
+    ep->tx_fifo_num = ep->num;
+  }
+  /* Set initial data PID. */
+  if (ep_type == EP_TYPE_BULK )
+  {
+    ep->data_pid_start = 0;
+  }
+
+  __HAL_LOCK(hpcd);
+  USB_ActivateEndpoint(hpcd->Instance , ep);
+  __HAL_UNLOCK(hpcd);
+  return ret;
+}
+
+
+/**
+  * @brief  Deactivate an endpoint.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+  USB_OTG_EPTypeDef *ep;
+
+  if ((ep_addr & 0x80) == 0x80)
+  {
+    ep = &hpcd->IN_ep[ep_addr & 0x7F];
+  }
+  else
+  {
+    ep = &hpcd->OUT_ep[ep_addr & 0x7F];
+  }
+  ep->num   = ep_addr & 0x7F;
+
+  ep->is_in = (0x80 & ep_addr) != 0;
+
+  __HAL_LOCK(hpcd);
+  USB_DeactivateEndpoint(hpcd->Instance , ep);
+  __HAL_UNLOCK(hpcd);
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Receive an amount of data.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @param  pBuf: pointer to the reception buffer
+  * @param  len: amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+  USB_OTG_EPTypeDef *ep;
+
+  ep = &hpcd->OUT_ep[ep_addr & 0x7F];
+
+  /*setup and start the Xfer */
+  ep->xfer_buff = pBuf;
+  ep->xfer_len = len;
+  ep->xfer_count = 0;
+  ep->is_in = 0;
+  ep->num = ep_addr & 0x7F;
+
+  if (hpcd->Init.dma_enable == 1)
+  {
+    ep->dma_addr = (uint32_t)pBuf;
+  }
+
+  __HAL_LOCK(hpcd);
+
+  if ((ep_addr & 0x7F) == 0 )
+  {
+    USB_EP0StartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+  }
+  else
+  {
+    USB_EPStartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+  }
+  __HAL_UNLOCK(hpcd);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Get Received Data Size.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @retval Data Size
+  */
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+  return hpcd->OUT_ep[ep_addr & 0x7F].xfer_count;
+}
+/**
+  * @brief  Send an amount of data.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @param  pBuf: pointer to the transmission buffer
+  * @param  len: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+  USB_OTG_EPTypeDef *ep;
+
+  ep = &hpcd->IN_ep[ep_addr & 0x7F];
+
+  /*setup and start the Xfer */
+  ep->xfer_buff = pBuf;
+  ep->xfer_len = len;
+  ep->xfer_count = 0;
+  ep->is_in = 1;
+  ep->num = ep_addr & 0x7F;
+
+  if (hpcd->Init.dma_enable == 1)
+  {
+    ep->dma_addr = (uint32_t)pBuf;
+  }
+
+  __HAL_LOCK(hpcd);
+
+  if ((ep_addr & 0x7F) == 0 )
+  {
+    USB_EP0StartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+  }
+  else
+  {
+    USB_EPStartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+  }
+
+  __HAL_UNLOCK(hpcd);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set a STALL condition over an endpoint.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+  USB_OTG_EPTypeDef *ep;
+
+  if ((0x80 & ep_addr) == 0x80)
+  {
+    ep = &hpcd->IN_ep[ep_addr & 0x7F];
+  }
+  else
+  {
+    ep = &hpcd->OUT_ep[ep_addr];
+  }
+
+  ep->is_stall = 1;
+  ep->num   = ep_addr & 0x7F;
+  ep->is_in = ((ep_addr & 0x80) == 0x80);
+
+
+  __HAL_LOCK(hpcd);
+  USB_EPSetStall(hpcd->Instance , ep);
+  if((ep_addr & 0x7F) == 0)
+  {
+    USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
+  }
+  __HAL_UNLOCK(hpcd);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Clear a STALL condition over in an endpoint.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+  USB_OTG_EPTypeDef *ep;
+
+  if ((0x80 & ep_addr) == 0x80)
+  {
+    ep = &hpcd->IN_ep[ep_addr & 0x7F];
+  }
+  else
+  {
+    ep = &hpcd->OUT_ep[ep_addr];
+  }
+
+  ep->is_stall = 0;
+  ep->num   = ep_addr & 0x7F;
+  ep->is_in = ((ep_addr & 0x80) == 0x80);
+
+  __HAL_LOCK(hpcd);
+  USB_EPClearStall(hpcd->Instance , ep);
+  __HAL_UNLOCK(hpcd);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Flush an endpoint.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+  __HAL_LOCK(hpcd);
+
+  if ((ep_addr & 0x80) == 0x80)
+  {
+    USB_FlushTxFifo(hpcd->Instance, ep_addr & 0x7F);
+  }
+  else
+  {
+    USB_FlushRxFifo(hpcd->Instance);
+  }
+
+  __HAL_UNLOCK(hpcd);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Activate remote wakeup signalling.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+  if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+  {
+    /* Activate Remote wakeup signaling */
+    USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  De-activate remote wakeup signalling.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+  /* De-activate Remote wakeup signaling */
+  USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG);
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral State functions #####
+ ===============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the PCD handle state.
+  * @param  hpcd: PCD handle
+  * @retval HAL state
+  */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd)
+{
+  return hpcd->State;
+}
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup PCD_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Check FIFO for the next packet to be loaded.
+  * @param  hpcd: PCD handle
+  * @param  epnum : endpoint number
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+  USB_OTG_EPTypeDef *ep;
+  int32_t len = 0;
+  uint32_t len32b;
+  uint32_t fifoemptymsk = 0;
+
+  ep = &hpcd->IN_ep[epnum];
+  len = ep->xfer_len - ep->xfer_count;
+
+  if (len > ep->maxpacket)
+  {
+    len = ep->maxpacket;
+  }
+
+
+  len32b = (len + 3) / 4;
+
+  while  ( (USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) > len32b &&
+          ep->xfer_count < ep->xfer_len &&
+            ep->xfer_len != 0)
+  {
+    /* Write the FIFO */
+    len = ep->xfer_len - ep->xfer_count;
+
+    if (len > ep->maxpacket)
+    {
+      len = ep->maxpacket;
+    }
+    len32b = (len + 3) / 4;
+
+    USB_WritePacket(USBx, ep->xfer_buff, epnum, len, hpcd->Init.dma_enable);
+
+    ep->xfer_buff  += len;
+    ep->xfer_count += len;
+  }
+
+  if(len <= 0)
+  {
+    fifoemptymsk = 0x1 << epnum;
+    USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
+
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PCD_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c
new file mode 100644
index 0000000..46f0ad3
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c
@@ -0,0 +1,198 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pcd_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   PCD HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the USB Peripheral Controller:
+  *           + Extended features functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PCDEx PCDEx
+  * @brief PCD Extended HAL module driver
+  * @{
+  */
+#ifdef HAL_PCD_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup PCDEx_Exported_Functions PCD Extended Exported Functions
+  * @{
+  */
+
+/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+  * @brief    PCDEx control functions
+  *
+ at verbatim
+ ===============================================================================
+                 ##### Extended features functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Update FIFO configuration
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Set Tx FIFO
+  * @param  hpcd: PCD handle
+  * @param  fifo: The number of Tx fifo
+  * @param  size: Fifo size
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
+{
+  uint8_t i = 0;
+  uint32_t Tx_Offset = 0;
+
+  /*  TXn min size = 16 words. (n  : Transmit FIFO index)
+      When a TxFIFO is not used, the Configuration should be as follows:
+          case 1 :  n > m    and Txn is not used    (n,m  : Transmit FIFO indexes)
+         --> Txm can use the space allocated for Txn.
+         case2  :  n < m    and Txn is not used    (n,m  : Transmit FIFO indexes)
+         --> Txn should be configured with the minimum space of 16 words
+     The FIFO is used optimally when used TxFIFOs are allocated in the top
+         of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
+     When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
+
+  Tx_Offset = hpcd->Instance->GRXFSIZ;
+
+  if(fifo == 0)
+  {
+    hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((uint32_t)size << 16) | Tx_Offset);
+  }
+  else
+  {
+    Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16;
+    for (i = 0; i < (fifo - 1); i++)
+    {
+      Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16);
+    }
+
+    /* Multiply Tx_Size by 2 to get higher performance */
+    hpcd->Instance->DIEPTXF[fifo - 1] = (uint32_t)(((uint32_t)size << 16) | Tx_Offset);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set Rx FIFO
+  * @param  hpcd: PCD handle
+  * @param  size: Size of Rx fifo
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
+{
+  hpcd->Instance->GRXFSIZ = size;
+
+  return HAL_OK;
+}
+
+#if defined(STM32F446xx)
+/**
+  * @brief  Activate LPM feature
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+  hpcd->lpm_active = ENABLE;
+  hpcd->LPM_State = LPM_L0;
+  USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM;
+  USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivate LPM feature.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+  hpcd->lpm_active = DISABLE;
+  USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM;
+  USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Send LPM message to user layer callback.
+  * @param  hpcd: PCD handle
+  * @param  msg: LPM message
+  * @retval HAL status
+  */
+__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
+{
+}
+#endif /* STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PCD_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c
new file mode 100644
index 0000000..faa35da
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c
@@ -0,0 +1,574 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pwr.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   PWR HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Power Controller (PWR) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PWR PWR
+  * @brief PWR HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWR_Private_Constants
+  * @{
+  */
+
+/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
+  * @{
+  */
+#define PVD_MODE_IT               ((uint32_t)0x00010000)
+#define PVD_MODE_EVT              ((uint32_t)0x00020000)
+#define PVD_RISING_EDGE           ((uint32_t)0x00000001)
+#define PVD_FALLING_EDGE          ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and de-initialization functions
+  *
+ at verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]
+      After reset, the backup domain (RTC registers, RTC backup data
+      registers and backup SRAM) is protected against possible unwanted
+      write accesses.
+      To enable access to the RTC Domain and RTC registers, proceed as follows:
+        (+) Enable the Power Controller (PWR) APB1 interface clock using the
+            __HAL_RCC_PWR_CLK_ENABLE() macro.
+        (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief Deinitializes the HAL PWR peripheral registers to their default reset values.
+  * @retval None
+  */
+void HAL_PWR_DeInit(void)
+{
+  __HAL_RCC_PWR_FORCE_RESET();
+  __HAL_RCC_PWR_RELEASE_RESET();
+}
+
+/**
+  * @brief Enables access to the backup domain (RTC registers, RTC
+  *         backup data registers and backup SRAM).
+  * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
+  *         Backup Domain Access should be kept enabled.
+  * @retval None
+  */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+  *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief Disables access to the backup domain (RTC registers, RTC
+  *         backup data registers and backup SRAM).
+  * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
+  *         Backup Domain Access should be kept enabled.
+  * @retval None
+  */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+  *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
+  *  @brief Low Power modes configuration functions
+  *
+ at verbatim
+
+ ===============================================================================
+                 ##### Peripheral Control functions #####
+ ===============================================================================
+
+    *** PVD configuration ***
+    =========================
+    [..]
+      (+) The PVD is used to monitor the VDD power supply by comparing it to a
+          threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
+      (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
+          than the PVD threshold. This event is internally connected to the EXTI
+          line16 and can generate an interrupt if enabled. This is done through
+          __HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
+      (+) The PVD is stopped in Standby mode.
+
+    *** Wake-up pin configuration ***
+    ================================
+    [..]
+      (+) Wake-up pin is used to wake up the system from Standby mode. This pin is
+          forced in input pull-down configuration and is active on rising edges.
+      (+) There is one Wake-up pin: Wake-up Pin 1 on PA.00.
+	        Only for STM32F446xx there are two Wake-Up pins: Pin1 on PA.00 and Pin 2 on PC.13
+
+    *** Low Power modes configuration ***
+    =====================================
+    [..]
+      The devices feature 3 low-power modes:
+      (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running.
+      (+) Stop mode: all clocks are stopped, regulator running, regulator
+          in low power mode
+      (+) Standby mode: 1.2V domain powered off.
+
+   *** Sleep mode ***
+   ==================
+    [..]
+      (+) Entry:
+        The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI)
+              functions with
+          (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+          (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+
+      -@@- The Regulator parameter is not used for the STM32F4 family
+              and is kept as parameter just to maintain compatibility with the
+              lower power families (STM32L).
+      (+) Exit:
+        Any peripheral interrupt acknowledged by the nested vectored interrupt
+              controller (NVIC) can wake up the device from Sleep mode.
+
+   *** Stop mode ***
+   =================
+    [..]
+      In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI,
+      and the HSE RC oscillators are disabled. Internal SRAM and register contents
+      are preserved.
+      The voltage regulator can be configured either in normal or low-power mode.
+      To minimize the consumption In Stop mode, FLASH can be powered off before
+      entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function.
+      It can be switched on again by software after exiting the Stop mode using
+      the HAL_PWREx_DisableFlashPowerDown() function.
+
+      (+) Entry:
+         The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON)
+             function with:
+          (++) Main regulator ON.
+          (++) Low Power regulator ON.
+      (+) Exit:
+        Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
+
+   *** Standby mode ***
+   ====================
+    [..]
+    (+)
+      The Standby mode allows to achieve the lowest power consumption. It is based
+      on the Cortex-M4 deep sleep mode, with the voltage regulator disabled.
+      The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and
+      the HSE oscillator are also switched off. SRAM and register contents are lost
+      except for the RTC registers, RTC backup registers, backup SRAM and Standby
+      circuitry.
+
+      The voltage regulator is OFF.
+
+      (++) Entry:
+        (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
+      (++) Exit:
+        (+++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wake-up,
+             tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
+
+   *** Auto-wake-up (AWU) from low-power mode ***
+   =============================================
+    [..]
+
+     (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
+      Wake-up event, a tamper event or a time-stamp event, without depending on
+      an external interrupt (Auto-wake-up mode).
+
+      (+) RTC auto-wake-up (AWU) from the Stop and Standby modes
+
+        (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
+              configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
+
+        (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
+             is necessary to configure the RTC to detect the tamper or time stamp event using the
+                HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions.
+
+        (++) To wake up from the Stop mode with an RTC Wake-up event, it is necessary to
+              configure the RTC to generate the RTC Wake-up event using the HAL_RTCEx_SetWakeUpTimer_IT() function.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+  * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration
+  *        information for the PVD.
+  * @note Refer to the electrical characteristics of your device datasheet for
+  *         more details about the voltage threshold corresponding to each
+  *         detection level.
+  * @retval None
+  */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+  assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+
+  /* Set PLS[7:5] bits according to PVDLevel value */
+  MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
+
+  /* Clear any previous config. Keep it clear if no event or IT mode is selected */
+  __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
+  __HAL_PWR_PVD_EXTI_DISABLE_IT();
+  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
+  __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+  /* Configure interrupt mode */
+  if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_IT();
+  }
+
+  /* Configure event mode */
+  if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
+  }
+
+  /* Configure the edge */
+  if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
+  }
+
+  if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+  }
+}
+
+/**
+  * @brief Enables the Power Voltage Detector(PVD).
+  * @retval None
+  */
+void HAL_PWR_EnablePVD(void)
+{
+  *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief Disables the Power Voltage Detector(PVD).
+  * @retval None
+  */
+void HAL_PWR_DisablePVD(void)
+{
+  *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE;
+}
+
+/**
+  * @brief Enables the Wake-up PINx functionality.
+  * @param WakeUpPinx: Specifies the Power Wake-Up pin to enable.
+  *         This parameter can be one of the following values:
+  *           @arg PWR_WAKEUP_PIN1
+  *           @arg PWR_WAKEUP_PIN2 only available in case of STM32F446xx devices
+  * @retval None
+  */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
+{
+  /* Check the parameter */
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+
+  /* Enable the wake up pin */
+  SET_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+  * @brief Disables the Wake-up PINx functionality.
+  * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
+  *         This parameter can be one of the following values:
+  *           @arg PWR_WAKEUP_PIN1
+  *           @arg PWR_WAKEUP_PIN2 only available in case of STM32F446xx devices
+  * @retval None
+  */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+  /* Check the parameter */
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+
+  /* Disable the wake up pin */
+  CLEAR_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+  * @brief Enters Sleep mode.
+  *
+  * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
+  *
+  * @note In Sleep mode, the systick is stopped to avoid exit from this mode with
+  *       systick interrupt when used as time base for Timeout
+  *
+  * @param Regulator: Specifies the regulator state in SLEEP mode.
+  *            This parameter can be one of the following values:
+  *            @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
+  *            @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
+  * @note This parameter is not used for the STM32F4 family and is kept as parameter
+  *       just to maintain compatibility with the lower power families.
+  * @param SLEEPEntry: Specifies if SLEEP mode in entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+  *            @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+  * @retval None
+  */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(Regulator));
+  assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+  /* Clear SLEEPDEEP bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+  /* Select SLEEP mode entry -------------------------------------------------*/
+  if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+  {
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __SEV();
+    __WFE();
+    __WFE();
+  }
+}
+
+/**
+  * @brief Enters Stop mode.
+  * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+  * @note When exiting Stop mode by issuing an interrupt or a wake-up event,
+  *         the HSI RC oscillator is selected as system clock.
+  * @note When the voltage regulator operates in low power mode, an additional
+  *         startup delay is incurred when waking up from Stop mode.
+  *         By keeping the internal regulator ON during Stop mode, the consumption
+  *         is higher although the startup time is reduced.
+  * @param Regulator: Specifies the regulator state in Stop mode.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
+  *            @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
+  * @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
+  *            @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
+  * @retval None
+  */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(Regulator));
+  assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+  /* Select the regulator state in Stop mode: Set PDDS and LPDS bits according to PWR_Regulator value */
+  MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS), Regulator);
+
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+  /* Select Stop mode entry --------------------------------------------------*/
+  if(STOPEntry == PWR_STOPENTRY_WFI)
+  {
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __SEV();
+    __WFE();
+    __WFE();
+  }
+  /* Reset SLEEPDEEP bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+  * @brief Enters Standby mode.
+  * @note In Standby mode, all I/O pins are high impedance except for:
+  *          - Reset pad (still available)
+  *          - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC
+  *            Alarm out, or RTC clock calibration out.
+  *          - RTC_AF2 pin (PI8) if configured for tamper or time-stamp.
+  *          - WKUP pin 1 (PA0) if enabled.
+  * @retval None
+  */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+  /* Select Standby mode */
+  SET_BIT(PWR->CR, PWR_CR_PDDS);
+
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+  /* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+  __force_stores();
+#endif
+  /* Request Wait For Interrupt */
+  __WFI();
+}
+
+/**
+  * @brief This function handles the PWR PVD interrupt request.
+  * @note This API should be called under the PVD_IRQHandler().
+  * @retval None
+  */
+void HAL_PWR_PVD_IRQHandler(void)
+{
+  /* Check PWR Exti flag */
+  if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
+  {
+    /* PWR PVD interrupt user callback */
+    HAL_PWR_PVDCallback();
+
+    /* Clear PWR Exti pending bit */
+    __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
+  }
+}
+
+/**
+  * @brief  PWR PVD interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWR_PVDCallback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWR_PVDCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
+  * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+  *       re-enters SLEEP mode when an interruption handling is over.
+  *       Setting this bit is useful when the processor is expected to run only on
+  *       interruptions handling.
+  * @retval None
+  */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+  /* Set SLEEPONEXIT bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+  * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
+  * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+  *       re-enters SLEEP mode when an interruption handling is over.
+  * @retval None
+  */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+  /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+  * @brief Enables CORTEX M4 SEVONPEND bit.
+  * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
+  *       WFE to wake up when an interrupt moves from inactive to pended.
+  * @retval None
+  */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+  /* Set SEVONPEND bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @brief Disables CORTEX M4 SEVONPEND bit.
+  * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
+  *       WFE to wake up when an interrupt moves from inactive to pended.
+  * @retval None
+  */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+  /* Clear SEVONPEND bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c
new file mode 100644
index 0000000..b0faab1
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c
@@ -0,0 +1,624 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pwr_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Extended PWR HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of PWR extension peripheral:
+  *           + Peripheral Extended features functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PWREx PWREx
+  * @brief PWR HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWREx_Private_Constants
+  * @{
+  */
+#define PWR_OVERDRIVE_TIMEOUT_VALUE  1000
+#define PWR_UDERDRIVE_TIMEOUT_VALUE  1000
+#define PWR_BKPREG_TIMEOUT_VALUE     1000
+#define PWR_VOSRDY_TIMEOUT_VALUE     1000
+/**
+  * @}
+  */
+
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+  *  @{
+  */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions
+  *  @brief Peripheral Extended features functions
+  *
+ at verbatim
+
+ ===============================================================================
+                 ##### Peripheral extended features functions #####
+ ===============================================================================
+
+    *** Main and Backup Regulators configuration ***
+    ================================================
+    [..]
+      (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from
+          the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is
+          retained even in Standby or VBAT mode when the low power backup regulator
+          is enabled. It can be considered as an internal EEPROM when VBAT is
+          always present. You can use the HAL_PWREx_EnableBkUpReg() function to
+          enable the low power backup regulator.
+
+      (+) When the backup domain is supplied by VDD (analog switch connected to VDD)
+          the backup SRAM is powered from VDD which replaces the VBAT power supply to
+          save battery life.
+
+      (+) The backup SRAM is not mass erased by a tamper event. It is read
+          protected to prevent confidential data, such as cryptographic private
+          key, from being accessed. The backup SRAM can be erased only through
+          the Flash interface when a protection level change from level 1 to
+          level 0 is requested.
+      - at - Refer to the description of Read protection (RDP) in the Flash
+          programming manual.
+
+      (+) The main internal regulator can be configured to have a tradeoff between
+          performance and power consumption when the device does not operate at
+          the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG()
+          macro which configure VOS bit in PWR_CR register
+
+        Refer to the product datasheets for more details.
+
+    *** FLASH Power Down configuration ****
+    =======================================
+    [..]
+      (+) By setting the FPDS bit in the PWR_CR register by using the
+          HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power
+          down mode when the device enters Stop mode. When the Flash memory
+          is in power down mode, an additional startup delay is incurred when
+          waking up from Stop mode.
+
+           (+) For STM32F42xxx/43xxx Devices, the scale can be modified only when the PLL
+           is OFF and the HSI or HSE clock source is selected as system clock.
+           The new value programmed is active only when the PLL is ON.
+           When the PLL is OFF, the voltage scale 3 is automatically selected.
+        Refer to the datasheets for more details.
+
+    *** Over-Drive and Under-Drive configuration ****
+    =================================================
+    [..]
+       (+) For STM32F42xxx/43xxx Devices, in Run mode: the main regulator has
+           2 operating modes available:
+        (++) Normal mode: The CPU and core logic operate at maximum frequency at a given
+             voltage scaling (scale 1, scale 2 or scale 3)
+        (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a
+            higher frequency than the normal mode for a given voltage scaling (scale 1,
+            scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and
+            disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow
+            the sequence described in Reference manual.
+
+       (+) For STM32F42xxx/43xxx Devices, in Stop mode: the main regulator or low power regulator
+           supplies a low power voltage to the 1.2V domain, thus preserving the content of registers
+           and internal SRAM. 2 operating modes are available:
+         (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only
+              available when the main regulator or the low power regulator is used in Scale 3 or
+              low voltage mode.
+         (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only
+              available when the main regulator or the low power regulator is in low voltage mode.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief Enables the Backup Regulator.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void)
+{
+  uint32_t tickstart = 0;
+
+  *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)ENABLE;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till Backup regulator ready flag is set */
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief Disables the Backup Regulator.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void)
+{
+  uint32_t tickstart = 0;
+
+  *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)DISABLE;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till Backup regulator ready flag is set */
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief Enables the Flash Power Down in Stop mode.
+  * @retval None
+  */
+void HAL_PWREx_EnableFlashPowerDown(void)
+{
+  *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief Disables the Flash Power Down in Stop mode.
+  * @retval None
+  */
+void HAL_PWREx_DisableFlashPowerDown(void)
+{
+  *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)DISABLE;
+}
+
+/**
+  * @brief Return Voltage Scaling Range.
+  * @retval The configured scale for the regulator voltage(VOS bit field).
+  *         The returned value can be one of the following:
+  *            - @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+  *            - @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+  *            - @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+  */
+uint32_t HAL_PWREx_GetVoltageRange(void)
+{
+  return (PWR->CR & PWR_CR_VOS);
+}
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/**
+  * @brief Configures the main internal regulator output voltage.
+  * @param  VoltageScaling: specifies the regulator output voltage to achieve
+  *         a tradeoff between performance and power consumption.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+  *                                               the maximum value of fHCLK = 168 MHz.
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+  *                                               the maximum value of fHCLK = 144 MHz.
+  * @note  When moving from Range 1 to Range 2, the system frequency must be decreased to
+  *        a value below 144 MHz before calling HAL_PWREx_ConfigVoltageScaling() API.
+  *        When moving from Range 2 to Range 1, the system frequency can be increased to
+  *        a value up to 168 MHz after calling HAL_PWREx_ConfigVoltageScaling() API.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+  uint32_t tickstart = 0;
+
+  assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
+
+  /* Enable PWR RCC Clock Peripheral */
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* Set Range */
+  __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+
+  /* Get Start Tick*/
+  tickstart = HAL_GetTick();
+  while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+      defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+/**
+  * @brief Configures the main internal regulator output voltage.
+  * @param  VoltageScaling: specifies the regulator output voltage to achieve
+  *         a tradeoff between performance and power consumption.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+  *                                               the maximum value of fHCLK is 168 MHz. It can be extended to
+  *                                               180 MHz by activating the over-drive mode.
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+  *                                               the maximum value of fHCLK is 144 MHz. It can be extended to,
+  *                                               168 MHz by activating the over-drive mode.
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 3 mode,
+  *                                               the maximum value of fHCLK is 120 MHz.
+  * @note To update the system clock frequency(SYSCLK):
+  *        - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig().
+  *        - Call the HAL_RCC_OscConfig() to configure the PLL.
+  *        - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale.
+  *        - Set the new system clock frequency using the HAL_RCC_ClockConfig().
+  * @note The scale can be modified only when the HSI or HSE clock source is selected
+  *        as system clock source, otherwise the API returns HAL_ERROR.
+  * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits
+  *       value in the PWR_CR1 register are not taken in account.
+  * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2.
+  * @note The new voltage scale is active only when the PLL is ON.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+  uint32_t tickstart = 0;
+
+  assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
+
+  /* Enable PWR RCC Clock Peripheral */
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* Check if the PLL is used as system clock or not */
+  if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+  {
+    /* Disable the main PLL */
+    __HAL_RCC_PLL_DISABLE();
+
+    /* Get Start Tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLL is disabled */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Set Range */
+    __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+
+    /* Enable the main PLL */
+    __HAL_RCC_PLL_ENABLE();
+
+    /* Get Start Tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLL is ready */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Get Start Tick */
+    tickstart = HAL_GetTick();
+    while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+    {
+      if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  return HAL_OK;
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/**
+  * @brief Enables Main Regulator low voltage mode.
+  * @note  This mode is only available for STM32F401xx/STM32F411xx devices.
+  * @retval None
+  */
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void)
+{
+  *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief Disables Main Regulator low voltage mode.
+  * @note  This mode is only available for STM32F401xx/STM32F411xx devices.
+  * @retval None
+  */
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void)
+{
+  *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)DISABLE;
+}
+
+/**
+  * @brief Enables Low Power Regulator low voltage mode.
+  * @note  This mode is only available for STM32F401xx/STM32F411xx devices.
+  * @retval None
+  */
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void)
+{
+  *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief Disables Low Power Regulator low voltage mode.
+  * @note  This mode is only available for STM32F401xx/STM32F411xx devices.
+  * @retval None
+  */
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void)
+{
+  *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)DISABLE;
+}
+
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/**
+  * @brief  Activates the Over-Drive mode.
+  * @note   This function can be used only for STM32F42xx/STM32F43xx devices.
+  *         This mode allows the CPU and the core logic to operate at a higher frequency
+  *         than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
+  * @note   It is recommended to enter or exit Over-drive mode when the application is not running
+  *         critical tasks and when the system clock source is either HSI or HSE.
+  *         During the Over-drive switch activation, no peripheral clocks should be enabled.
+  *         The peripheral clocks must be enabled once the Over-drive mode is activated.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void)
+{
+  uint32_t tickstart = 0;
+
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* Enable the Over-drive to extend the clock frequency to 180 Mhz */
+  __HAL_PWR_OVERDRIVE_ENABLE();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Enable the Over-drive switch */
+  __HAL_PWR_OVERDRIVESWITCHING_ENABLE();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates the Over-Drive mode.
+  * @note   This function can be used only for STM32F42xx/STM32F43xx devices.
+  *         This mode allows the CPU and the core logic to operate at a higher frequency
+  *         than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
+  * @note   It is recommended to enter or exit Over-drive mode when the application is not running
+  *         critical tasks and when the system clock source is either HSI or HSE.
+  *         During the Over-drive switch activation, no peripheral clocks should be enabled.
+  *         The peripheral clocks must be enabled once the Over-drive mode is activated.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void)
+{
+  uint32_t tickstart = 0;
+
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* Disable the Over-drive switch */
+  __HAL_PWR_OVERDRIVESWITCHING_DISABLE();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Disable the Over-drive */
+  __HAL_PWR_OVERDRIVE_DISABLE();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enters in Under-Drive STOP mode.
+  *
+  * @note   This mode is only available for STM32F42xxx/STM324F3xxx devices.
+  *
+  * @note    This mode can be selected only when the Under-Drive is already active
+  *
+  * @note    This mode is enabled only with STOP low power mode.
+  *          In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+  *          mode is only available when the main regulator or the low power regulator
+  *          is in low voltage mode
+  *
+  * @note   If the Under-drive mode was enabled, it is automatically disabled after
+  *         exiting Stop mode.
+  *         When the voltage regulator operates in Under-drive mode, an additional
+  *         startup delay is induced when waking up from Stop mode.
+  *
+  * @note   In Stop mode, all I/O pins keep the same state as in Run mode.
+  *
+  * @note   When exiting Stop mode by issuing an interrupt or a wake-up event,
+  *         the HSI RC oscillator is selected as system clock.
+  *
+  * @note   When the voltage regulator operates in low power mode, an additional
+  *         startup delay is incurred when waking up from Stop mode.
+  *         By keeping the internal regulator ON during Stop mode, the consumption
+  *         is higher although the startup time is reduced.
+  *
+  * @param  Regulator: specifies the regulator state in STOP mode.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_MAINREGULATOR_UNDERDRIVE_ON:  Main Regulator in under-drive mode
+  *                 and Flash memory in power-down when the device is in Stop under-drive mode
+  *            @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON:  Low Power Regulator in under-drive mode
+  *                and Flash memory in power-down when the device is in Stop under-drive mode
+  * @param  STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
+  *            @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+  uint32_t tmpreg1 = 0;
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator));
+  assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+  /* Enable Power ctrl clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  /* Enable the Under-drive Mode ---------------------------------------------*/
+  /* Clear Under-drive flag */
+  __HAL_PWR_CLEAR_ODRUDR_FLAG();
+
+  /* Enable the Under-drive */
+  __HAL_PWR_UNDERDRIVE_ENABLE();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait for UnderDrive mode is ready */
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_UDRDY))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_UDERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Select the regulator state in STOP mode ---------------------------------*/
+  tmpreg1 = PWR->CR;
+  /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */
+  tmpreg1 &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_MRUDS);
+
+  /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */
+  tmpreg1 |= Regulator;
+
+  /* Store the new value */
+  PWR->CR = tmpreg1;
+
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+  /* Select STOP mode entry --------------------------------------------------*/
+  if(STOPEntry == PWR_SLEEPENTRY_WFI)
+  {
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __WFE();
+  }
+  /* Reset SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+
+  return HAL_OK;
+}
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c
new file mode 100644
index 0000000..d681534
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c
@@ -0,0 +1,1942 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_qspi.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   QSPI HAL module driver.
+  *
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the QuadSPI interface (QSPI).
+  *           + Initialization and de-initialization functions
+  *           + Indirect functional mode management
+  *           + Memory-mapped functional mode management
+  *           + Auto-polling functional mode management
+  *           + Interrupts and flags management
+  *           + DMA channel configuration for indirect functional mode
+  *           + Errors management and abort functionality
+  *
+  @verbatim
+ ===============================================================================
+                        ##### How to use this driver #####
+ ===============================================================================
+  [..]
+    *** Initialization ***
+    ======================
+    [..]
+      (#) As prerequisite, fill in the HAL_QSPI_MspInit() :
+        (+) Enable QuadSPI clock interface with __HAL_RCC_QSPI_CLK_ENABLE().
+        (+) Reset QuadSPI IP with __HAL_RCC_QSPI_FORCE_RESET() and __HAL_RCC_QSPI_RELEASE_RESET().
+        (+) Enable the clocks for the QuadSPI GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE().
+        (+) Configure these QuadSPI pins in alternate mode using HAL_GPIO_Init().
+        (+) If interrupt mode is used, enable and configure QuadSPI global
+            interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+        (+) If DMA mode is used, enable the clocks for the QuadSPI DMA channel
+            with __HAL_RCC_DMAx_CLK_ENABLE(), configure DMA with HAL_DMA_Init(),
+            link it with QuadSPI handle using __HAL_LINKDMA(), enable and configure
+            DMA channel global interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+      (#) Configure the flash size, the clock prescaler, the fifo threshold, the
+          clock mode, the sample shifting and the CS high time using the HAL_QSPI_Init() function.
+
+    *** Indirect functional mode ***
+    ================================
+    [..]
+      (#) Configure the command sequence using the HAL_QSPI_Command() or HAL_QSPI_Command_IT()
+          functions :
+         (+) Instruction phase : the mode used and if present the instruction opcode.
+         (+) Address phase : the mode used and if present the size and the address value.
+         (+) Alternate-bytes phase : the mode used and if present the size and the alternate
+             bytes values.
+         (+) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+         (+) Data phase : the mode used and if present the number of bytes.
+         (+) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay
+             if activated.
+         (+) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+      (#) If no data is required for the command, it is sent directly to the memory :
+         (+) In polling mode, the output of the function is done when the transfer is complete.
+         (+) In interrupt mode, HAL_QSPI_CmdCpltCallback() will be called when the transfer is complete.
+      (#) For the indirect write mode, use HAL_QSPI_Transmit(), HAL_QSPI_Transmit_DMA() or
+          HAL_QSPI_Transmit_IT() after the command configuration :
+         (+) In polling mode, the output of the function is done when the transfer is complete.
+         (+) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold
+             is reached and HAL_QSPI_TxCpltCallback() will be called when the transfer is complete.
+         (+) In DMA mode, HAL_QSPI_TxHalfCpltCallback() will be called at the half transfer and
+             HAL_QSPI_TxCpltCallback() will be called when the transfer is complete.
+      (#) For the indirect read mode, use HAL_QSPI_Receive(), HAL_QSPI_Receive_DMA() or
+          HAL_QSPI_Receive_IT() after the command configuration :
+         (+) In polling mode, the output of the function is done when the transfer is complete.
+         (+) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold
+             is reached and HAL_QSPI_RxCpltCallback() will be called when the transfer is complete.
+         (+) In DMA mode, HAL_QSPI_RxHalfCpltCallback() will be called at the half transfer and
+             HAL_QSPI_RxCpltCallback() will be called when the transfer is complete.
+
+    *** Auto-polling functional mode ***
+    ====================================
+    [..]
+      (#) Configure the command sequence and the auto-polling functional mode using the
+          HAL_QSPI_AutoPolling() or HAL_QSPI_AutoPolling_IT() functions :
+         (+) Instruction phase : the mode used and if present the instruction opcode.
+         (+) Address phase : the mode used and if present the size and the address value.
+         (+) Alternate-bytes phase : the mode used and if present the size and the alternate
+             bytes values.
+         (+) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+         (+) Data phase : the mode used.
+         (+) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay
+             if activated.
+         (+) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+         (+) The size of the status bytes, the match value, the mask used, the match mode (OR/AND),
+             the polling interval and the automatic stop activation.
+      (#) After the configuration :
+         (+) In polling mode, the output of the function is done when the status match is reached. The
+             automatic stop is activated to avoid an infinite loop.
+         (+) In interrupt mode, HAL_QSPI_StatusMatchCallback() will be called each time the status match is reached.
+
+    *** Memory-mapped functional mode ***
+    =====================================
+    [..]
+      (#) Configure the command sequence and the memory-mapped functional mode using the
+          HAL_QSPI_MemoryMapped() functions :
+         (+) Instruction phase : the mode used and if present the instruction opcode.
+         (+) Address phase : the mode used and the size.
+         (+) Alternate-bytes phase : the mode used and if present the size and the alternate
+             bytes values.
+         (+) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+         (+) Data phase : the mode used.
+         (+) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay
+             if activated.
+         (+) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+         (+) The timeout activation and the timeout period.
+      (#) After the configuration, the QuadSPI will be used as soon as an access on the AHB is done on
+          the address range. HAL_QSPI_TimeOutCallback() will be called when the timeout expires.
+
+    *** Errors management and abort functionality ***
+    ==================================================
+    [..]
+      (#) HAL_QSPI_GetError() function gives the error rised during the last operation.
+      (#) HAL_QSPI_Abort() function aborts any on-going operation and flushes the fifo.
+      (#) HAL_QSPI_GetState() function gives the current state of the HAL QuadSPI driver.
+
+    *** Workarounds linked to Silicon Limitation ***
+    ====================================================
+    [..]
+      (#) Workarounds Implemented inside HAL Driver
+         (+) Extra data written in the FIFO at the end of a read transfer
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup QSPI QSPI
+  * @brief HAL QSPI module driver
+  * @{
+  */
+#ifdef HAL_QSPI_MODULE_ENABLED
+
+#if defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup QSPI_Private_Constants
+  * @{
+  */
+#define QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE ((uint32_t)0x00000000)          /*!<Indirect write mode*/
+#define QSPI_FUNCTIONAL_MODE_INDIRECT_READ  ((uint32_t)QUADSPI_CCR_FMODE_0) /*!<Indirect read mode*/
+#define QSPI_FUNCTIONAL_MODE_AUTO_POLLING   ((uint32_t)QUADSPI_CCR_FMODE_1) /*!<Automatic polling mode*/
+#define QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED  ((uint32_t)QUADSPI_CCR_FMODE)   /*!<Memory-mapped mode*/
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/** @addtogroup QSPI_Private_Macros QSPI Private Macros
+  * @{
+  */
+#define IS_QSPI_FUNCTIONAL_MODE(MODE) (((MODE) == QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE) || \
+                                       ((MODE) == QSPI_FUNCTIONAL_MODE_INDIRECT_READ)  || \
+                                       ((MODE) == QSPI_FUNCTIONAL_MODE_AUTO_POLLING)   || \
+                                       ((MODE) == QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED))
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup QSPI_Private_Functions QSPI Private Functions
+  * @{
+  */
+static void QSPI_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMATxCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Flag, FlagStatus State, uint32_t Timeout);
+static void QSPI_Config(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t FunctionalMode);
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup QSPI_Exported_Functions QSPI Exported Functions
+  * @{
+  */
+
+/** @defgroup QSPI_Exported_Functions_Group1 Initialization/de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+ at verbatim
+===============================================================================
+            ##### Initialization and Configuration functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to :
+      (+) Initialize the QuadSPI.
+      (+) De-initialize the QuadSPI.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief Initializes the QSPI mode according to the specified parameters
+  *        in the QSPI_InitTypeDef and creates the associated handle.
+  * @param hqspi: qspi handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Init(QSPI_HandleTypeDef *hqspi)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Check the QSPI handle allocation */
+  if(hqspi == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_QSPI_ALL_INSTANCE(hqspi->Instance));
+  assert_param(IS_QSPI_CLOCK_PRESCALER(hqspi->Init.ClockPrescaler));
+  assert_param(IS_QSPI_FIFO_THRESHOLD(hqspi->Init.FifoThreshold));
+  assert_param(IS_QSPI_SSHIFT(hqspi->Init.SampleShifting));
+  assert_param(IS_QSPI_FLASH_SIZE(hqspi->Init.FlashSize));
+  assert_param(IS_QSPI_CS_HIGH_TIME(hqspi->Init.ChipSelectHighTime));
+  assert_param(IS_QSPI_CLOCK_MODE(hqspi->Init.ClockMode));
+  assert_param(IS_QSPI_DUAL_FLASH_MODE(hqspi->Init.DualFlash));
+
+  if (hqspi->Init.DualFlash != QSPI_DUALFLASH_ENABLE )
+  {
+    assert_param(IS_QSPI_FLASH_ID(hqspi->Init.FlashID));
+  }
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  if(hqspi->State == HAL_QSPI_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hqspi->Lock = HAL_UNLOCKED;
+
+    /* Init the low level hardware : GPIO, CLOCK */
+    HAL_QSPI_MspInit(hqspi);
+
+    /* Configure the default timeout for the QSPI memory access */
+    HAL_QSPI_SetTimeout(hqspi, HAL_QPSI_TIMEOUT_DEFAULT_VALUE);
+  }
+
+  /* Configure QSPI FIFO Threshold */
+  MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FTHRES, ((hqspi->Init.FifoThreshold - 1) << 8));
+
+  /* Wait till BUSY flag reset */
+  status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
+
+  if(status == HAL_OK)
+  {
+
+    /* Configure QSPI Clock Prescaler and Sample Shift */
+    MODIFY_REG(hqspi->Instance->CR,(QUADSPI_CR_PRESCALER | QUADSPI_CR_SSHIFT | QUADSPI_CR_FSEL | QUADSPI_CR_DFM), ((hqspi->Init.ClockPrescaler << 24)| hqspi->Init.SampleShifting | hqspi->Init.FlashID| hqspi->Init.DualFlash ));
+
+    /* Configure QSPI Flash Size, CS High Time and Clock Mode */
+    MODIFY_REG(hqspi->Instance->DCR, (QUADSPI_DCR_FSIZE | QUADSPI_DCR_CSHT | QUADSPI_DCR_CKMODE),
+               ((hqspi->Init.FlashSize << 16) | hqspi->Init.ChipSelectHighTime | hqspi->Init.ClockMode));
+
+    /* Enable the QSPI peripheral */
+    __HAL_QSPI_ENABLE(hqspi);
+
+    /* Set QSPI error code to none */
+    hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+    /* Initialize the QSPI state */
+    hqspi->State = HAL_QSPI_STATE_READY;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hqspi);
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief DeInitializes the QSPI peripheral
+  * @param hqspi: qspi handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_DeInit(QSPI_HandleTypeDef *hqspi)
+{
+  /* Check the QSPI handle allocation */
+  if(hqspi == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  /* Disable the QSPI Peripheral Clock */
+  __HAL_QSPI_DISABLE(hqspi);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+  HAL_QSPI_MspDeInit(hqspi);
+
+  /* Set QSPI error code to none */
+  hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+  /* Initialize the QSPI state */
+  hqspi->State = HAL_QSPI_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hqspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief QSPI MSP Init
+  * @param hqspi: QSPI handle
+  * @retval None
+  */
+ __weak void HAL_QSPI_MspInit(QSPI_HandleTypeDef *hqspi)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_QSPI_MspInit can be implemented in the user file
+   */
+}
+
+/**
+  * @brief QSPI MSP DeInit
+  * @param hqspi: QSPI handle
+  * @retval None
+  */
+ __weak void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_QSPI_MspDeInit can be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Exported_Functions_Group2 IO operation functions
+  *  @brief QSPI Transmit/Receive functions
+  *
+ at verbatim
+ ===============================================================================
+                      ##### I/O operation functions #####
+ ===============================================================================
+       [..]
+    This subsection provides a set of functions allowing to :
+      (+) Handle the interrupts.
+      (+) Handle the command sequence.
+      (+) Transmit data in blocking, interrupt or DMA mode.
+      (+) Receive data in blocking, interrupt or DMA mode.
+      (+) Manage the auto-polling functional mode.
+      (+) Manage the memory-mapped functional mode.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief This function handles QSPI interrupt request.
+  * @param hqspi: QSPI handle
+  * @retval None.
+  */
+void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi)
+{
+  __IO uint32_t *data_reg;
+  uint32_t flag = 0, itsource = 0;
+
+  /* QSPI FIFO Threshold interrupt occurred ----------------------------------*/
+  flag     = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT);
+  itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_FT);
+
+  if((flag != RESET) && (itsource != RESET))
+  {
+    data_reg = &hqspi->Instance->DR;
+
+    if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX)
+    {
+      /* Transmission process */
+      while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != 0)
+      {
+        if (hqspi->TxXferCount > 0)
+        {
+          /* Fill the FIFO until it is full */
+          *(__IO uint8_t *)data_reg = *hqspi->pTxBuffPtr++;
+          hqspi->TxXferCount--;
+        }
+        else
+        {
+          /* No more data available for the transfer */
+          break;
+        }
+      }
+    }
+    else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX)
+    {
+      /* Receiving Process */
+      while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != 0)
+      {
+        if (hqspi->RxXferCount > 0)
+        {
+          /* Read the FIFO until it is empty */
+          *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
+          hqspi->RxXferCount--;
+        }
+        else
+        {
+          /* All data have been received for the transfer */
+          break;
+        }
+      }
+    }
+
+    /* FIFO Threshold callback */
+    HAL_QSPI_FifoThresholdCallback(hqspi);
+  }
+
+  /* QSPI Transfer Complete interrupt occurred -------------------------------*/
+  flag     = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_TC);
+  itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_TC);
+
+  if((flag != RESET) && (itsource != RESET))
+  {
+    /* Clear interrupt */
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+    /* Disable the QSPI FIFO Threshold, Transfer Error and Transfer complete Interrupts */
+    __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT);
+
+    /* Transfer complete callback */
+    if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX)
+    {
+      /* Clear Busy bit */
+      HAL_QSPI_Abort(hqspi);
+
+      /* TX Complete callback */
+      HAL_QSPI_TxCpltCallback(hqspi);
+    }
+    else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX)
+    {
+      data_reg = &hqspi->Instance->DR;
+      while(READ_BIT(hqspi->Instance->SR, QUADSPI_SR_FLEVEL) != 0)
+      {
+        if (hqspi->RxXferCount > 0)
+        {
+          /* Read the last data received in the FIFO until it is empty */
+          *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
+          hqspi->RxXferCount--;
+        }
+        else
+        {
+          /* All data have been received for the transfer */
+          break;
+        }
+      }
+
+      /* Workaround - Extra data written in the FIFO at the end of a read transfer */
+      HAL_QSPI_Abort(hqspi);
+
+      /* RX Complete callback */
+      HAL_QSPI_RxCpltCallback(hqspi);
+    }
+    else if(hqspi->State == HAL_QSPI_STATE_BUSY)
+    {
+      /* Command Complete callback */
+      HAL_QSPI_CmdCpltCallback(hqspi);
+    }
+
+    /* Change state of QSPI */
+    hqspi->State = HAL_QSPI_STATE_READY;
+  }
+
+  /* QSPI Status Match interrupt occurred ------------------------------------*/
+  flag     = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_SM);
+  itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_SM);
+
+  if((flag != RESET) && (itsource != RESET))
+  {
+    /* Clear interrupt */
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_SM);
+
+    /* Check if the automatic poll mode stop is activated */
+    if(READ_BIT(hqspi->Instance->CR, QUADSPI_CR_APMS) != 0)
+    {
+      /* Disable the QSPI FIFO Threshold, Transfer Error and Status Match Interrupts */
+      __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_SM | QSPI_IT_FT | QSPI_IT_TE);
+
+      /* Change state of QSPI */
+      hqspi->State = HAL_QSPI_STATE_READY;
+    }
+
+    /* Status match callback */
+    HAL_QSPI_StatusMatchCallback(hqspi);
+  }
+
+  /* QSPI Transfer Error interrupt occurred ----------------------------------*/
+  flag     = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_TE);
+  itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_TE);
+
+  if((flag != RESET) && (itsource != RESET))
+  {
+    /* Clear interrupt */
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE);
+
+    /* Disable all the QSPI Interrupts */
+    __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_SM | QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT);
+
+    /* Set error code */
+    hqspi->ErrorCode |= HAL_QSPI_ERROR_TRANSFER;
+
+    /* Change state of QSPI */
+    hqspi->State = HAL_QSPI_STATE_ERROR;
+
+    /* Error callback */
+    HAL_QSPI_ErrorCallback(hqspi);
+  }
+
+  /* QSPI Time out interrupt occurred -----------------------------------------*/
+  flag     = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_TO);
+  itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_TO);
+
+  if((flag != RESET) && (itsource != RESET))
+  {
+    /* Clear interrupt */
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TO);
+
+    /* Time out callback */
+    HAL_QSPI_TimeOutCallback(hqspi);
+  }
+}
+
+/**
+  * @brief Sets the command configuration.
+  * @param hqspi: QSPI handle
+  * @param cmd : structure that contains the command configuration information
+  * @param Timeout : Time out duration
+  * @note   This function is used only in Indirect Read or Write Modes
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Command(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Check the parameters */
+  assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+  if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+  {
+    assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+  }
+
+  assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+  if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+  {
+    assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+  }
+
+  assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+  if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+  {
+    assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+  }
+
+  assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+  assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+  assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+  assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+  assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+    /* Update QSPI state */
+    hqspi->State = HAL_QSPI_STATE_BUSY;
+
+    /* Wait till BUSY flag reset */
+    status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, Timeout);
+
+    if (status == HAL_OK)
+    {
+      /* Call the configuration function */
+      QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+      if (cmd->DataMode == QSPI_DATA_NONE)
+      {
+        /* When there is no data phase, the transfer start as soon as the configuration is done
+        so wait until TC flag is set to go back in idle state */
+        if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, Timeout) != HAL_OK)
+        {
+          status = HAL_TIMEOUT;
+        }
+        else
+        {
+          __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+          /* Update QSPI state */
+          hqspi->State = HAL_QSPI_STATE_READY;
+        }
+
+      }
+      else
+      {
+        /* Update QSPI state */
+        hqspi->State = HAL_QSPI_STATE_READY;
+      }
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief Sets the command configuration in interrupt mode.
+  * @param hqspi: QSPI handle
+  * @param cmd : structure that contains the command configuration information
+  * @note   This function is used only in Indirect Read or Write Modes
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Command_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Check the parameters */
+  assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+  if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+  {
+    assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+  }
+
+  assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+  if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+  {
+    assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+  }
+
+  assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+  if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+  {
+    assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+  }
+
+  assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+  assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+  assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+  assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+  assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+   if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+    /* Update QSPI state */
+    hqspi->State = HAL_QSPI_STATE_BUSY;
+
+    /* Wait till BUSY flag reset */
+    status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
+
+    if (status == HAL_OK)
+    {
+      if (cmd->DataMode == QSPI_DATA_NONE)
+      {
+        /* When there is no data phase, the transfer start as soon as the configuration is done
+        so activate TC and TE interrupts */
+        /* Enable the QSPI Transfer Error Interrupt */
+        __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_TC);
+      }
+
+      /* Call the configuration function */
+      QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+      if (cmd->DataMode != QSPI_DATA_NONE)
+      {
+        /* Update QSPI state */
+        hqspi->State = HAL_QSPI_STATE_READY;
+      }
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief Transmit an amount of data in blocking mode.
+  * @param hqspi: QSPI handle
+  * @param pData: pointer to data buffer
+  * @param Timeout : Time out duration
+  * @note   This function is used only in Indirect Write Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Transmit(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  __IO uint32_t *data_reg = &hqspi->Instance->DR;
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    if(pData != NULL )
+    {
+      hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
+
+      /* Configure counters and size of the handle */
+      hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->pTxBuffPtr = pData;
+
+      /* Configure QSPI: CCR register with functional as indirect write */
+      MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+      while(hqspi->TxXferCount > 0)
+      {
+        /* Wait until FT flag is set to send data */
+        if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_FT, SET, Timeout) != HAL_OK)
+        {
+          status = HAL_TIMEOUT;
+          break;
+        }
+
+        *(__IO uint8_t *)data_reg = *hqspi->pTxBuffPtr++;
+        hqspi->TxXferCount--;
+      }
+
+      if (status == HAL_OK)
+      {
+        /* Wait until TC flag is set to go back in idle state */
+        if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, Timeout) != HAL_OK)
+        {
+          status = HAL_TIMEOUT;
+        }
+        else
+        {
+          /* Clear Transfer Complete bit */
+          __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+          /* Clear Busy bit */
+          status = HAL_QSPI_Abort(hqspi);
+        }
+      }
+
+      /* Update QSPI state */
+      hqspi->State = HAL_QSPI_STATE_READY;
+    }
+    else
+    {
+      status = HAL_ERROR;
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  return status;
+}
+
+
+/**
+  * @brief Receive an amount of data in blocking mode
+  * @param hqspi: QSPI handle
+  * @param pData: pointer to data buffer
+  * @param Timeout : Time out duration
+  * @note   This function is used only in Indirect Read Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Receive(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
+  __IO uint32_t *data_reg = &hqspi->Instance->DR;
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    if(pData != NULL )
+    {
+      hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
+
+      /* Configure counters and size of the handle */
+      hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->pRxBuffPtr = pData;
+
+      /* Configure QSPI: CCR register with functional as indirect read */
+      MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+      /* Start the transfer by re-writing the address in AR register */
+      WRITE_REG(hqspi->Instance->AR, addr_reg);
+
+      while(hqspi->RxXferCount > 0)
+      {
+        /* Wait until FT or TC flag is set to read received data */
+        if(QSPI_WaitFlagStateUntilTimeout(hqspi, (QSPI_FLAG_FT | QSPI_FLAG_TC), SET, Timeout) != HAL_OK)
+        {
+          status = HAL_TIMEOUT;
+          break;
+        }
+
+        *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
+        hqspi->RxXferCount--;
+      }
+
+      if (status == HAL_OK)
+      {
+        /* Wait until TC flag is set to go back in idle state */
+        if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, Timeout) != HAL_OK)
+        {
+          status = HAL_TIMEOUT;
+        }
+        else
+        {
+          /* Clear Transfer Complete bit */
+          __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+          /* Workaround - Extra data written in the FIFO at the end of a read transfer */
+          status = HAL_QSPI_Abort(hqspi);
+        }
+      }
+
+      /* Update QSPI state */
+      hqspi->State = HAL_QSPI_STATE_READY;
+    }
+    else
+    {
+      status = HAL_ERROR;
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  return status;
+}
+
+/**
+  * @brief  Send an amount of data in interrupt mode
+  * @param  hqspi: QSPI handle
+  * @param  pData: pointer to data buffer
+  * @note   This function is used only in Indirect Write Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Transmit_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    if(pData != NULL )
+    {
+      hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
+
+      /* Configure counters and size of the handle */
+      hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->pTxBuffPtr = pData;
+
+      /* Configure QSPI: CCR register with functional as indirect write */
+      MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+      /* Enable the QSPI transfer error, FIFO threshold and transfert complete Interrupts */
+      __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC);
+
+    }
+    else
+    {
+      status = HAL_ERROR;
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  return status;
+}
+
+/**
+  * @brief  Receive an amount of data in no-blocking mode with Interrupt
+  * @param  hqspi: QSPI handle
+  * @param  pData: pointer to data buffer
+  * @note   This function is used only in Indirect Read Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Receive_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    if(pData != NULL )
+    {
+      hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
+
+      /* Configure counters and size of the handle */
+      hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->pRxBuffPtr = pData;
+
+      /* Configure QSPI: CCR register with functional as indirect read */
+      MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+      /* Start the transfer by re-writing the address in AR register */
+      WRITE_REG(hqspi->Instance->AR, addr_reg);
+
+      /* Enable the QSPI transfer error, FIFO threshold and transfert complete Interrupts */
+      __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC);
+    }
+    else
+    {
+      status = HAL_ERROR;
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  return status;
+}
+
+/**
+  * @brief  Sends an amount of data in non blocking mode with DMA.
+  * @param  hqspi: QSPI handle
+  * @param  pData: pointer to data buffer
+  * @note   This function is used only in Indirect Write Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Transmit_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t *tmp;
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    if(pData != NULL )
+    {
+      hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
+
+      /* Configure counters and size of the handle */
+      hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->pTxBuffPtr = pData;
+
+      /* Configure QSPI: CCR register with functional mode as indirect write */
+      MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+      /* Set the QSPI DMA transfer complete callback */
+      hqspi->hdma->XferCpltCallback = QSPI_DMATxCplt;
+
+      /* Set the QSPI DMA Half transfer complete callback */
+      hqspi->hdma->XferHalfCpltCallback = QSPI_DMATxHalfCplt;
+
+      /* Set the DMA error callback */
+      hqspi->hdma->XferErrorCallback = QSPI_DMAError;
+
+      /* Configure the direction of the DMA */
+      hqspi->hdma->Init.Direction = DMA_MEMORY_TO_PERIPH;
+      MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction);
+
+      /* Enable the QSPI transmit DMA Channel */
+      tmp = (uint32_t*)&pData;
+      HAL_DMA_Start_IT(hqspi->hdma, *(uint32_t*)tmp, (uint32_t)&hqspi->Instance->DR, hqspi->TxXferSize);
+
+      /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */
+      SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+    }
+    else
+    {
+      status = HAL_OK;
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  return status;
+}
+
+/**
+  * @brief  Receives an amount of data in non blocking mode with DMA.
+  * @param  hqspi: QSPI handle
+  * @param  pData: pointer to data buffer.
+  * @note   This function is used only in Indirect Read Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Receive_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t *tmp;
+  uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    if(pData != NULL )
+    {
+      hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
+
+      /* Configure counters and size of the handle */
+      hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->pRxBuffPtr = pData;
+
+      /* Set the QSPI DMA transfer complete callback */
+      hqspi->hdma->XferCpltCallback = QSPI_DMARxCplt;
+
+      /* Set the QSPI DMA Half transfer complete callback */
+      hqspi->hdma->XferHalfCpltCallback = QSPI_DMARxHalfCplt;
+
+      /* Set the DMA error callback */
+      hqspi->hdma->XferErrorCallback = QSPI_DMAError;
+
+      /* Configure the direction of the DMA */
+      hqspi->hdma->Init.Direction = DMA_PERIPH_TO_MEMORY;
+      MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction);
+
+      /* Enable the DMA Channel */
+      tmp = (uint32_t*)&pData;
+      HAL_DMA_Start_IT(hqspi->hdma, (uint32_t)&hqspi->Instance->DR, *(uint32_t*)tmp, hqspi->RxXferSize);
+
+      /* Configure QSPI: CCR register with functional as indirect read */
+      MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+      /* Start the transfer by re-writing the address in AR register */
+      WRITE_REG(hqspi->Instance->AR, addr_reg);
+
+      /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */
+      SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+    }
+    else
+    {
+      status = HAL_ERROR;
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  return status;
+}
+
+/**
+  * @brief  Configure the QSPI Automatic Polling Mode in blocking mode.
+  * @param  hqspi: QSPI handle
+  * @param  cmd: structure that contains the command configuration information.
+  * @param  cfg: structure that contains the polling configuration information.
+  * @param  Timeout : Time out duration
+  * @note   This function is used only in Automatic Polling Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_AutoPolling(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Check the parameters */
+  assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+  if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+  {
+  assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+  }
+
+  assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+  if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+  {
+    assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+  }
+
+  assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+  if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+  {
+    assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+  }
+
+  assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+  assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+  assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+  assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+  assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+  assert_param(IS_QSPI_INTERVAL(cfg->Interval));
+  assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize));
+  assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode));
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+
+  hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+  /* Update state */
+  hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING;
+
+  /* Wait till BUSY flag reset */
+  status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, Timeout);
+
+  if (status == HAL_OK)
+  {
+    /* Configure QSPI: PSMAR register with the status match value */
+    WRITE_REG(hqspi->Instance->PSMAR, cfg->Match);
+
+    /* Configure QSPI: PSMKR register with the status mask value */
+    WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask);
+
+    /* Configure QSPI: PIR register with the interval value */
+    WRITE_REG(hqspi->Instance->PIR, cfg->Interval);
+
+    /* Configure QSPI: CR register with Match mode and Automatic stop enabled
+       (otherwise there will be an infinite loop in blocking mode) */
+    MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS),
+               (cfg->MatchMode | QSPI_AUTOMATIC_STOP_ENABLE));
+
+    /* Call the configuration function */
+    cmd->NbData = cfg->StatusBytesSize;
+    QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING);
+
+    /* Wait until SM flag is set to go back in idle state */
+    if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_SM, SET, Timeout) != HAL_OK)
+    {
+      status = HAL_TIMEOUT;
+    }
+    else
+    {
+      __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_SM);
+
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_READY;
+    }
+  }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  Configure the QSPI Automatic Polling Mode in non-blocking mode.
+  * @param  hqspi: QSPI handle
+  * @param  cmd: structure that contains the command configuration information.
+  * @param  cfg: structure that contains the polling configuration information.
+  * @note   This function is used only in Automatic Polling Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Check the parameters */
+  assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+  if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+  {
+    assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+  }
+
+  assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+  if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+  {
+    assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+  }
+
+  assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+  if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+  {
+    assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+  }
+
+  assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+  assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+  assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+  assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+  assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+  assert_param(IS_QSPI_INTERVAL(cfg->Interval));
+  assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize));
+  assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode));
+  assert_param(IS_QSPI_AUTOMATIC_STOP(cfg->AutomaticStop));
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+    /* Update state */
+    hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING;
+
+    /* Wait till BUSY flag reset */
+    status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
+
+  if (status == HAL_OK)
+  {
+    /* Configure QSPI: PSMAR register with the status match value */
+    WRITE_REG(hqspi->Instance->PSMAR, cfg->Match);
+
+    /* Configure QSPI: PSMKR register with the status mask value */
+    WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask);
+
+    /* Configure QSPI: PIR register with the interval value */
+    WRITE_REG(hqspi->Instance->PIR, cfg->Interval);
+
+    /* Configure QSPI: CR register with Match mode and Automatic stop mode */
+    MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS),
+               (cfg->MatchMode | cfg->AutomaticStop));
+
+    /* Call the configuration function */
+    cmd->NbData = cfg->StatusBytesSize;
+    QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING);
+
+    /* Enable the QSPI Transfer Error, FIFO threshold and status match Interrupt */
+    __HAL_QSPI_ENABLE_IT(hqspi, (QSPI_IT_FT | QSPI_IT_SM | QSPI_IT_TE));
+        }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  Configure the Memory Mapped mode.
+  * @param  hqspi: QSPI handle
+  * @param  cmd: structure that contains the command configuration information.
+  * @param  cfg: structure that contains the memory mapped configuration information.
+  * @note   This function is used only in Memory mapped Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Check the parameters */
+  assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+  if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+  {
+  assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+  }
+
+  assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+  if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+  {
+    assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+  }
+
+  assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+  if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+  {
+    assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+  }
+
+  assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+  assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+  assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+  assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+  assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+  assert_param(IS_QSPI_TIMEOUT_ACTIVATION(cfg->TimeOutActivation));
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+    /* Update state */
+    hqspi->State = HAL_QSPI_STATE_BUSY_MEM_MAPPED;
+
+    /* Wait till BUSY flag reset */
+    status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
+
+  if (status == HAL_OK)
+  {
+    /* Configure QSPI: CR register with time out counter enable */
+    MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_TCEN, cfg->TimeOutActivation);
+
+    if (cfg->TimeOutActivation == QSPI_TIMEOUT_COUNTER_ENABLE)
+    {
+      assert_param(IS_QSPI_TIMEOUT_PERIOD(cfg->TimeOutPeriod));
+
+      /* Configure QSPI: LPTR register with the low-power time out value */
+      WRITE_REG(hqspi->Instance->LPTR, cfg->TimeOutPeriod);
+
+      /* Enable the QSPI TimeOut Interrupt */
+      __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TO);
+    }
+
+    /* Call the configuration function */
+    QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED);
+
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;
+
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  Transfer Error callbacks
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_ErrorCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_QSPI_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Command completed callbacks.
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_CmdCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_QSPI_CmdCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Transfer completed callbacks.
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_RxCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_QSPI_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tx Transfer completed callbacks.
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+ __weak void HAL_QSPI_TxCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_QSPI_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Half Transfer completed callbacks.
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_RxHalfCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_QSPI_RxHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tx Half Transfer completed callbacks.
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+ __weak void HAL_QSPI_TxHalfCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_QSPI_TxHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  FIFO Threshold callbacks
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_QSPI_FIFOThresholdCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Status Match callbacks
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_StatusMatchCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_QSPI_StatusMatchCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Timeout callbacks
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_TimeOutCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_QSPI_TimeOutCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Exported_Functions_Group3 Peripheral Control and State functions
+  *  @brief   QSPI control and State functions
+  *
+ at verbatim
+ ===============================================================================
+                  ##### Peripheral Control and State functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to :
+      (+) Check in run-time the state of the driver.
+      (+) Check the error code set during last operation.
+      (+) Abort any operation.
+.....
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the QSPI state.
+  * @param  hqspi: QSPI handle
+  * @retval HAL state
+  */
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState(QSPI_HandleTypeDef *hqspi)
+{
+  return hqspi->State;
+}
+
+/**
+* @brief  Return the QSPI error code
+* @param  hqspi: QSPI handle
+* @retval QSPI Error Code
+*/
+uint32_t HAL_QSPI_GetError(QSPI_HandleTypeDef *hqspi)
+{
+  return hqspi->ErrorCode;
+}
+
+/**
+* @brief  Abort the current transmission
+* @param  hqspi: QSPI handle
+* @retval HAL status
+*/
+HAL_StatusTypeDef HAL_QSPI_Abort(QSPI_HandleTypeDef *hqspi)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Configure QSPI: CR register with Abort request */
+  SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
+
+  /* Wait until TC flag is set to go back in idle state */
+  if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, hqspi->Timeout) != HAL_OK)
+  {
+    status = HAL_TIMEOUT;
+  }
+  else
+  {
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+    /* Wait until BUSY flag is reset */
+    status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
+
+    /* Update state */
+    hqspi->State = HAL_QSPI_STATE_READY;
+  }
+
+  return status;
+}
+
+/** @brief Set QSPI timeout
+  * @param  hqspi: QSPI handle.
+  * @param  Timeout: Timeout for the QSPI memory access.
+  * @retval None
+  */
+void HAL_QSPI_SetTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Timeout)
+{
+  hqspi->Timeout = Timeout;
+}
+
+/**
+* @}
+*/
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @brief  DMA QSPI receive process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void QSPI_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+  QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hqspi->RxXferCount = 0;
+
+  /* Wait for QSPI TC Flag */
+  if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, hqspi->Timeout) != HAL_OK)
+  {
+    /* Time out Occurred */
+    HAL_QSPI_ErrorCallback(hqspi);
+  }
+  else
+  {
+    /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+    CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+    /* Disable the DMA channel */
+    HAL_DMA_Abort(hdma);
+
+    /* Clear Transfer Complete bit */
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+    /* Workaround - Extra data written in the FIFO at the end of a read transfer */
+    HAL_QSPI_Abort(hqspi);
+
+    /* Update state */
+    hqspi->State = HAL_QSPI_STATE_READY;
+
+    HAL_QSPI_RxCpltCallback(hqspi);
+  }
+}
+
+/**
+  * @brief  DMA QSPI transmit process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void QSPI_DMATxCplt(DMA_HandleTypeDef *hdma)
+{
+  QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hqspi->TxXferCount = 0;
+
+  /* Wait for QSPI TC Flag */
+  if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, hqspi->Timeout) != HAL_OK)
+  {
+    /* Time out Occurred */
+    HAL_QSPI_ErrorCallback(hqspi);
+  }
+  else
+  {
+    /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+    CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+    /* Disable the DMA channel */
+    HAL_DMA_Abort(hdma);
+
+    /* Clear Transfer Complete bit */
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+    /* Clear Busy bit */
+    HAL_QSPI_Abort(hqspi);
+
+    /* Update state */
+    hqspi->State = HAL_QSPI_STATE_READY;
+
+    HAL_QSPI_TxCpltCallback(hqspi);
+  }
+}
+
+/**
+  * @brief  DMA QSPI receive process half complete callback
+  * @param  hdma : DMA handle
+  * @retval None
+  */
+static void QSPI_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_QSPI_RxHalfCpltCallback(hqspi);
+}
+
+/**
+  * @brief  DMA QSPI transmit process half complete callback
+  * @param  hdma : DMA handle
+  * @retval None
+  */
+static void QSPI_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_QSPI_TxHalfCpltCallback(hqspi);
+}
+
+/**
+  * @brief  DMA QSPI communication error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void QSPI_DMAError(DMA_HandleTypeDef *hdma)
+{
+  QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  hqspi->RxXferCount = 0;
+  hqspi->TxXferCount = 0;
+  hqspi->State       = HAL_QSPI_STATE_ERROR;
+  hqspi->ErrorCode   |= HAL_QSPI_ERROR_DMA;
+
+  HAL_QSPI_ErrorCallback(hqspi);
+}
+
+/**
+  * @brief  This function wait a flag state until time out.
+  * @param  hqspi: QSPI handle
+  * @param  Flag: Flag checked
+  * @param  State: Value of the flag expected
+  * @param  Timeout: Duration of the time out
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Flag,
+                                                        FlagStatus State, uint32_t Timeout)
+{
+  uint32_t tickstart = HAL_GetTick();
+
+  /* Wait until flag is in expected state */
+  while((FlagStatus)(__HAL_QSPI_GET_FLAG(hqspi, Flag)) != State)
+  {
+    /* Check for the Timeout */
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+      {
+        hqspi->State     = HAL_QSPI_STATE_ERROR;
+        hqspi->ErrorCode |= HAL_QSPI_ERROR_TIMEOUT;
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function configures the communication registers
+  * @param  hqspi: QSPI handle
+  * @param  cmd: structure that contains the command configuration information
+  * @param  FunctionalMode: functional mode to configured
+  *           This parameter can be one of the following values:
+  *            @arg QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE: Indirect write mode
+  *            @arg QSPI_FUNCTIONAL_MODE_INDIRECT_READ: Indirect read mode
+  *            @arg QSPI_FUNCTIONAL_MODE_AUTO_POLLING: Automatic polling mode
+  *            @arg QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED: Memory-mapped mode
+  * @retval None
+  */
+static void QSPI_Config(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t FunctionalMode)
+{
+  assert_param(IS_QSPI_FUNCTIONAL_MODE(FunctionalMode));
+
+  if ((cmd->DataMode != QSPI_DATA_NONE) && (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED))
+  {
+    /* Configure QSPI: DLR register with the number of data to read or write */
+    WRITE_REG(hqspi->Instance->DLR, (cmd->NbData - 1));
+  }
+
+  if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+  {
+    if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+    {
+      /* Configure QSPI: ABR register with alternate bytes value */
+      WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes);
+
+      if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+      {
+        /*---- Command with instruction, address and alternate bytes ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+                                         cmd->AlternateByteMode | cmd->AddressSize | cmd->AddressMode |
+                                         cmd->InstructionMode | cmd->Instruction | FunctionalMode));
+
+        if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+        {
+          /* Configure QSPI: AR register with address value */
+          WRITE_REG(hqspi->Instance->AR, cmd->Address);
+        }
+      }
+      else
+      {
+        /*---- Command with instruction and alternate bytes ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+                                         cmd->AlternateByteMode | cmd->AddressMode | cmd->InstructionMode |
+                                         cmd->Instruction | FunctionalMode));
+      }
+    }
+    else
+    {
+      if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+      {
+        /*---- Command with instruction and address ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
+                                         cmd->AddressSize | cmd->AddressMode | cmd->InstructionMode |
+                                         cmd->Instruction | FunctionalMode));
+
+        if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+        {
+          /* Configure QSPI: AR register with address value */
+          WRITE_REG(hqspi->Instance->AR, cmd->Address);
+        }
+      }
+      else
+      {
+        /*---- Command with only instruction ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
+                                         cmd->AddressMode | cmd->InstructionMode | cmd->Instruction  |
+                                         FunctionalMode));
+      }
+    }
+  }
+  else
+  {
+    if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+    {
+      /* Configure QSPI: ABR register with alternate bytes value */
+      WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes);
+
+      if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+      {
+        /*---- Command with address and alternate bytes ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+                                         cmd->AlternateByteMode | cmd->AddressSize | cmd->AddressMode |
+                                         cmd->InstructionMode | FunctionalMode));
+
+        if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+        {
+          /* Configure QSPI: AR register with address value */
+          WRITE_REG(hqspi->Instance->AR, cmd->Address);
+        }
+      }
+      else
+      {
+        /*---- Command with only alternate bytes ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+                                         cmd->AlternateByteMode | cmd->AddressMode | cmd->InstructionMode |
+                                         FunctionalMode));
+      }
+    }
+    else
+    {
+      if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+      {
+        /*---- Command with only address ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
+                                         cmd->AddressSize | cmd->AddressMode | cmd->InstructionMode |
+                                         FunctionalMode));
+
+        if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+        {
+          /* Configure QSPI: AR register with address value */
+          WRITE_REG(hqspi->Instance->AR, cmd->Address);
+        }
+      }
+      else
+      {
+        /*---- Command with only data phase ----*/
+        if (cmd->DataMode != QSPI_DATA_NONE)
+        {
+          /* Configure QSPI: CCR register with all communications parameters */
+          WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                           cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
+                                           cmd->AddressMode | cmd->InstructionMode | FunctionalMode));
+        }
+      }
+    }
+  }
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F446xx */
+
+#endif /* HAL_QSPI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c
new file mode 100644
index 0000000..30ce2f9
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c
@@ -0,0 +1,1234 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rcc.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   RCC HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Reset and Clock Control (RCC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions
+  *
+  @verbatim
+  ==============================================================================
+                      ##### RCC specific features #####
+  ==============================================================================
+    [..]
+      After reset the device is running from Internal High Speed oscillator
+      (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache
+      and I-Cache are disabled, and all peripherals are off except internal
+      SRAM, Flash and JTAG.
+      (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
+          all peripherals mapped on these busses are running at HSI speed.
+      (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
+      (+) All GPIOs are in input floating state, except the JTAG pins which
+          are assigned to be used for debug purpose.
+
+    [..]
+      Once the device started from reset, the user application has to:
+      (+) Configure the clock source to be used to drive the System clock
+          (if the application needs higher frequency/performance)
+      (+) Configure the System clock frequency and Flash settings
+      (+) Configure the AHB and APB busses prescalers
+      (+) Enable the clock for the peripheral(s) to be used
+      (+) Configure the clock source(s) for peripherals which clocks are not
+          derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG)
+
+                      ##### RCC Limitations #####
+  ==============================================================================
+    [..]
+      A delay between an RCC peripheral clock enable and the effective peripheral
+      enabling should be taken into account in order to manage the peripheral read/write
+      from/to registers.
+      (+) This delay depends on the peripheral mapping.
+      (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle
+          after the clock enable bit is set on the hardware register
+      (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle
+          after the clock enable bit is set on the hardware register
+
+    [..]
+      Possible Workarounds:
+      (#) Enable the peripheral clock sometimes before the peripheral read/write
+          register is required.
+      (#) For AHB peripheral, insert two dummy read to the peripheral register.
+      (#) For APB peripheral, insert a dummy read to the peripheral register.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RCC RCC
+  * @brief RCC HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup RCC_Private_Constants
+  * @{
+  */
+#define CLOCKSWITCH_TIMEOUT_VALUE  ((uint32_t)5000) /* 5 s    */
+
+/* Private macro -------------------------------------------------------------*/
+#define __MCO1_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
+#define MCO1_GPIO_PORT        GPIOA
+#define MCO1_PIN              GPIO_PIN_8
+
+#define __MCO2_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
+#define MCO2_GPIO_PORT         GPIOC
+#define MCO2_PIN               GPIO_PIN_9
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Variables RCC Private Variables
+  * @{
+  */
+const uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Functions RCC Exported Functions
+  *  @{
+  */
+
+/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+           ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]
+      This section provides functions allowing to configure the internal/external oscillators
+      (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1
+       and APB2).
+
+    [..] Internal/external clock and PLL configuration
+         (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through
+             the PLL as System clock source.
+
+         (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC
+             clock source.
+
+         (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or
+             through the PLL as System clock source. Can be used also as RTC clock source.
+
+         (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
+
+         (#) PLL (clocked by HSI or HSE), featuring two different output clocks:
+           (++) The first output is used to generate the high speed system clock (up to 168 MHz)
+           (++) The second output is used to generate the clock for the USB OTG FS (48 MHz),
+                the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz).
+
+         (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
+             and if a HSE clock failure occurs(HSE used directly or through PLL as System
+             clock source), the System clocks automatically switched to HSI and an interrupt
+             is generated if enabled. The interrupt is linked to the Cortex-M4 NMI
+             (Non-Maskable Interrupt) exception vector.
+
+         (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
+             clock (through a configurable prescaler) on PA8 pin.
+
+         (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S
+             clock (through a configurable prescaler) on PC9 pin.
+
+    [..] System, AHB and APB busses clocks configuration
+         (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+             HSE and PLL.
+             The AHB clock (HCLK) is derived from System clock through configurable
+             prescaler and used to clock the CPU, memory and peripherals mapped
+             on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived
+             from AHB clock through configurable prescalers and used to clock
+             the peripherals mapped on these busses. You can use
+             "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
+
+         - at - All the peripheral clocks are derived from the System clock (SYSCLK) except:
+           (+@) I2S: the I2S clock can be derived either from a specific PLL (PLLI2S) or
+                from an external clock mapped on the I2S_CKIN pin.
+                You have to use __HAL_RCC_PLLI2S_CONFIG() macro to configure this clock.
+          (+@) SAI: the SAI clock can be derived either from a specific PLL (PLLI2S) or (PLLSAI) or
+                from an external clock mapped on the I2S_CKIN pin.
+                You have to use __HAL_RCC_PLLI2S_CONFIG() macro to configure this clock.
+           (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock
+                divided by 2 to 31. You have to use __HAL_RCC_RTC_CONFIG() and __HAL_RCC_RTC_ENABLE()
+                macros to configure this clock.
+           (+@) USB OTG FS, SDIO and RTC: USB OTG FS require a frequency equal to 48 MHz
+                to work correctly, while the SDIO require a frequency equal or lower than
+                to 48. This clock is derived of the main PLL through PLLQ divider.
+           (+@) IWDG clock which is always the LSI clock.
+
+         (#) For the STM32F405xx/07xx and STM32F415xx/17xx devices, the maximum
+             frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 84 MHz and PCLK1 42 MHz.
+             Depending on the device voltage range, the maximum frequency should
+             be adapted accordingly (refer to the product datasheets for more details).
+
+         (#) For the STM32F42xxx and STM32F43xxx devices, the maximum frequency
+             of the SYSCLK and HCLK is 180 MHz, PCLK2 90 MHz and PCLK1 45 MHz.
+             Depending on the device voltage range, the maximum frequency should
+             be adapted accordingly (refer to the product datasheets for more details).
+
+         (#) For the STM32F401xx, the maximum frequency of the SYSCLK and HCLK is 84 MHz,
+             PCLK2 84 MHz and PCLK1 42 MHz.
+             Depending on the device voltage range, the maximum frequency should
+             be adapted accordingly (refer to the product datasheets for more details).
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Resets the RCC clock configuration to the default reset state.
+  * @note   The default reset state of the clock configuration is given below:
+  *            - HSI ON and used as system clock source
+  *            - HSE, PLL and PLLI2S OFF
+  *            - AHB, APB1 and APB2 prescaler set to 1.
+  *            - CSS, MCO1 and MCO2 OFF
+  *            - All interrupts disabled
+  * @note   This function doesn't modify the configuration of the
+  *            - Peripheral clocks
+  *            - LSI, LSE and RTC clocks
+  * @retval None
+  */
+void HAL_RCC_DeInit(void)
+{
+  /* Set HSION bit */
+  SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4);
+
+  /* Reset CFGR register */
+  CLEAR_REG(RCC->CFGR);
+
+  /* Reset HSEON, CSSON, PLLON, PLLI2S */
+  CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_CSSON | RCC_CR_PLLON| RCC_CR_PLLI2SON);
+
+  /* Reset PLLCFGR register */
+  CLEAR_REG(RCC->PLLCFGR);
+  SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2);
+
+  /* Reset PLLI2SCFGR register */
+  CLEAR_REG(RCC->PLLI2SCFGR);
+  SET_BIT(RCC->PLLI2SCFGR,  RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1);
+
+  /* Reset HSEBYP bit */
+  CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+
+  /* Disable all interrupts */
+  CLEAR_REG(RCC->CIR);
+}
+
+/**
+  * @brief  Initializes the RCC Oscillators according to the specified parameters in the
+  *         RCC_OscInitTypeDef.
+  * @param  RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+  *         contains the configuration information for the RCC Oscillators.
+  * @note   The PLL is not disabled when used as system clock.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+ uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+  /*------------------------------- HSE Configuration ------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+    /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE)                                                                     ||\
+      ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+    {
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+      {
+        return HAL_ERROR;
+      }
+    }
+    else
+    {
+      /* Reset HSEON and HSEBYP bits before configuring the HSE --------------*/
+      __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF);
+
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till HSE is disabled */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+
+      /* Set the new HSE configuration ---------------------------------------*/
+      __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+      /* Check the HSE State */
+      if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF)
+      {
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSE is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSE is bypassed or disabled */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+  /*----------------------------- HSI Configuration --------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+    assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+    /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI)                                                                     ||\
+      ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+    {
+      /* When HSI is used as system clock it will not disabled */
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+      {
+        return HAL_ERROR;
+      }
+      /* Otherwise, just the calibration is allowed */
+      else
+      {
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+      }
+    }
+    else
+    {
+      /* Check the HSI State */
+      if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
+      {
+        /* Enable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_ENABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSI is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+      }
+      else
+      {
+        /* Disable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_DISABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSI is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+  /*------------------------------ LSI Configuration -------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+    /* Check the LSI State */
+    if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
+    {
+      /* Enable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_ENABLE();
+
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSI is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    else
+    {
+      /* Disable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_DISABLE();
+
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSI is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /*------------------------------ LSE Configuration -------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+    /* Enable Power Clock*/
+    __HAL_RCC_PWR_CLK_ENABLE();
+
+    /* Enable write access to Backup domain */
+    PWR->CR |= PWR_CR_DBP;
+
+    /* Wait for Backup domain Write protection disable */
+    tickstart = HAL_GetTick();
+
+    while((PWR->CR & PWR_CR_DBP) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Reset LSEON and LSEBYP bits before configuring the LSE ----------------*/
+    __HAL_RCC_LSE_CONFIG(RCC_LSE_OFF);
+
+    /* Get Start Tick*/
+    tickstart = HAL_GetTick();
+
+    /* Wait till LSE is ready */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Set the new LSE configuration -----------------------------------------*/
+    __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+    /* Check the LSE State */
+    if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
+    {
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSE is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    else
+    {
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSE is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /*-------------------------------- PLL Configuration -----------------------*/
+  /* Check the parameters */
+  assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+  if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+  {
+    /* Check if the PLL is used as system clock or not */
+    if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+    {
+      if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+      {
+        /* Check the parameters */
+        assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+        assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
+        assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
+        assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
+        assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
+
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+
+        /* Configure the main PLL clock source, multiplication and division factors. */
+        WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource                                            | \
+                                 RCC_OscInitStruct->PLL.PLLM                                                 | \
+                                 (RCC_OscInitStruct->PLL.PLLN << POSITION_VAL(RCC_PLLCFGR_PLLN))             | \
+                                 (((RCC_OscInitStruct->PLL.PLLP >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \
+                                 (RCC_OscInitStruct->PLL.PLLQ << POSITION_VAL(RCC_PLLCFGR_PLLQ))));
+        /* Enable the main PLL. */
+        __HAL_RCC_PLL_ENABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+    else
+    {
+      return HAL_ERROR;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CPU, AHB and APB busses clocks according to the specified
+  *         parameters in the RCC_ClkInitStruct.
+  * @param  RCC_ClkInitStruct: pointer to an RCC_OscInitTypeDef structure that
+  *         contains the configuration information for the RCC peripheral.
+  * @param  FLatency: FLASH Latency, this parameter depend on device selected
+  *
+  * @note   The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+  *         and updated by HAL_RCC_GetHCLKFreq() function called within this function
+  *
+  * @note   The HSI is used (enabled by hardware) as system clock source after
+  *         startup from Reset, wake-up from STOP and STANDBY mode, or in case
+  *         of failure of the HSE used directly or indirectly as system clock
+  *         (if the Clock Security System CSS is enabled).
+  *
+  * @note   A switch from one clock source to another occurs only if the target
+  *         clock source is ready (clock stable after startup delay or PLL locked).
+  *         If a clock source which is not yet ready is selected, the switch will
+  *         occur when the clock source will be ready.
+  *
+  * @note   Depending on the device voltage range, the software has to set correctly
+  *         HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency
+  *         (for more details refer to section above "Initialization/de-initialization functions")
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef  *RCC_ClkInitStruct, uint32_t FLatency)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
+  assert_param(IS_FLASH_LATENCY(FLatency));
+
+  /* To correctly read data from FLASH memory, the number of wait states (LATENCY)
+    must be correctly programmed according to the frequency of the CPU clock
+    (HCLK) and the supply voltage of the device. */
+
+  /* Increasing the CPU frequency */
+  if(FLatency > (FLASH->ACR & FLASH_ACR_LATENCY))
+  {
+    /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+    __HAL_FLASH_SET_LATENCY(FLatency);
+
+    /* Check that the new number of wait states is taken into account to access the Flash
+    memory by reading the FLASH_ACR register */
+    if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+    {
+      return HAL_ERROR;
+    }
+
+    /*-------------------------- HCLK Configuration --------------------------*/
+    if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+    {
+      assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+      MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+    }
+
+    /*------------------------- SYSCLK Configuration ---------------------------*/
+    if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+    {
+      assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+      /* HSE is selected as System Clock Source */
+      if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+      {
+        /* Check the HSE ready flag */
+        if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+        {
+          return HAL_ERROR;
+        }
+      }
+      /* PLL is selected as System Clock Source */
+      else if((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)   ||
+              (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK))
+      {
+        /* Check the PLL ready flag */
+        if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+        {
+          return HAL_ERROR;
+        }
+      }
+      /* HSI is selected as System Clock Source */
+      else
+      {
+        /* Check the HSI ready flag */
+        if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+        {
+          return HAL_ERROR;
+        }
+      }
+
+      __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+      {
+        while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+      {
+        while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK)
+      {
+        while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLRCLK)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        while(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+  /* Decreasing the CPU frequency */
+  else
+  {
+    /*-------------------------- HCLK Configuration --------------------------*/
+    if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+    {
+      assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+      MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+    }
+
+    /*------------------------- SYSCLK Configuration -------------------------*/
+    if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+    {
+      assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+      /* HSE is selected as System Clock Source */
+      if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+      {
+        /* Check the HSE ready flag */
+        if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+        {
+          return HAL_ERROR;
+        }
+      }
+      /* PLL is selected as System Clock Source */
+      else if((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) ||
+              (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK))
+      {
+        /* Check the PLL ready flag */
+        if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+        {
+          return HAL_ERROR;
+        }
+      }
+      /* HSI is selected as System Clock Source */
+      else
+      {
+        /* Check the HSI ready flag */
+        if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+        {
+          return HAL_ERROR;
+        }
+      }
+      __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+      {
+        while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+      {
+        while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK)
+      {
+        while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLRCLK)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        while(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+
+    /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+    __HAL_FLASH_SET_LATENCY(FLatency);
+
+    /* Check that the new number of wait states is taken into account to access the Flash
+    memory by reading the FLASH_ACR register */
+    if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+    {
+      return HAL_ERROR;
+    }
+ }
+
+  /*-------------------------- PCLK1 Configuration ---------------------------*/
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+  {
+    assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
+    MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
+  }
+
+  /*-------------------------- PCLK2 Configuration ---------------------------*/
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
+  {
+    assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
+    MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3));
+  }
+
+  /* Configure the source of time base considering new system clocks settings*/
+  HAL_InitTick (TICK_INT_PRIORITY);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
+ *  @brief   RCC clocks control functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the RCC Clocks
+    frequencies.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9).
+  * @note   PA8/PC9 should be configured in alternate function mode.
+  * @param  RCC_MCOx: specifies the output direction for the clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8).
+  *            @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9).
+  * @param  RCC_MCOSource: specifies the clock source to output.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
+  *            @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
+  *            @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
+  *            @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
+  *            @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+  *            @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source
+  *            @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
+  *            @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
+  * @param  RCC_MCODiv: specifies the MCOx prescaler.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCODIV_1: no division applied to MCOx clock
+  *            @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+  *            @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+  *            @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+  *            @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+  * @retval None
+  */
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
+{
+  GPIO_InitTypeDef GPIO_InitStruct;
+  /* Check the parameters */
+  assert_param(IS_RCC_MCO(RCC_MCOx));
+  assert_param(IS_RCC_MCODIV(RCC_MCODiv));
+  /* RCC_MCO1 */
+  if(RCC_MCOx == RCC_MCO1)
+  {
+    assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
+
+    /* MCO1 Clock Enable */
+    __MCO1_CLK_ENABLE();
+
+    /* Configure the MCO1 pin in alternate function mode */
+    GPIO_InitStruct.Pin = MCO1_PIN;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+    HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct);
+
+    /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */
+    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv));
+  }
+  else
+  {
+    assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource));
+
+    /* MCO2 Clock Enable */
+    __MCO2_CLK_ENABLE();
+
+    /* Configure the MCO2 pin in alternate function mode */
+    GPIO_InitStruct.Pin = MCO2_PIN;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+    HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct);
+
+    /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */
+    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3)));
+  }
+}
+
+/**
+  * @brief  Enables the Clock Security System.
+  * @note   If a failure is detected on the HSE oscillator clock, this oscillator
+  *         is automatically disabled and an interrupt is generated to inform the
+  *         software about the failure (Clock Security System Interrupt, CSSI),
+  *         allowing the MCU to perform rescue operations. The CSSI is linked to
+  *         the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector.
+  * @retval None
+  */
+void HAL_RCC_EnableCSS(void)
+{
+  *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief  Disables the Clock Security System.
+  * @retval None
+  */
+void HAL_RCC_DisableCSS(void)
+{
+  *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE;
+}
+
+/**
+  * @brief  Returns the SYSCLK frequency
+  *
+  * @note   The system frequency computed by this function is not the real
+  *         frequency in the chip. It is calculated based on the predefined
+  *         constant and the selected clock source:
+  * @note     If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+  * @note     If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
+  * @note     If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
+  *           or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  * @note     (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *               16 MHz) but the real value may vary depending on the variations
+  *               in voltage and temperature.
+  * @note     (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *                25 MHz), user has to ensure that HSE_VALUE is same as the real
+  *                frequency of the crystal used. Otherwise, this function may
+  *                have wrong result.
+  *
+  * @note   The result of this function could be not correct when using fractional
+  *         value for HSE crystal.
+  *
+  * @note   This function can be used by the user application to compute the
+  *         baudrate for the communication peripherals or configure other parameters.
+  *
+  * @note   Each time SYSCLK changes, this function must be called to update the
+  *         right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+  *
+  *
+  * @retval SYSCLK frequency
+  */
+__weak uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+  uint32_t pllm = 0, pllvco = 0, pllp = 0;
+  uint32_t sysclockfreq = 0;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  switch (RCC->CFGR & RCC_CFGR_SWS)
+  {
+    case RCC_CFGR_SWS_HSI:  /* HSI used as system clock source */
+    {
+      sysclockfreq = HSI_VALUE;
+       break;
+    }
+    case RCC_CFGR_SWS_HSE:  /* HSE used as system clock  source */
+    {
+      sysclockfreq = HSE_VALUE;
+      break;
+    }
+    case RCC_CFGR_SWS_PLL:  /* PLL used as system clock  source */
+    {
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+      SYSCLK = PLL_VCO / PLLP */
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+      }
+      pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> POSITION_VAL(RCC_PLLCFGR_PLLP)) + 1 ) *2);
+
+      sysclockfreq = pllvco/pllp;
+      break;
+    }
+    default:
+    {
+      sysclockfreq = HSI_VALUE;
+      break;
+    }
+  }
+  return sysclockfreq;
+}
+
+/**
+  * @brief  Returns the HCLK frequency
+  * @note   Each time HCLK changes, this function must be called to update the
+  *         right HCLK value. Otherwise, any configuration based on this function will be incorrect.
+  *
+  * @note   The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+  *         and updated within this function
+  * @retval HCLK frequency
+  */
+uint32_t HAL_RCC_GetHCLKFreq(void)
+{
+  SystemCoreClock = HAL_RCC_GetSysClockFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> POSITION_VAL(RCC_CFGR_HPRE)];
+  return SystemCoreClock;
+}
+
+/**
+  * @brief  Returns the PCLK1 frequency
+  * @note   Each time PCLK1 changes, this function must be called to update the
+  *         right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
+  * @retval PCLK1 frequency
+  */
+uint32_t HAL_RCC_GetPCLK1Freq(void)
+{
+  /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
+  return (HAL_RCC_GetHCLKFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> POSITION_VAL(RCC_CFGR_PPRE1)]);
+}
+
+/**
+  * @brief  Returns the PCLK2 frequency
+  * @note   Each time PCLK2 changes, this function must be called to update the
+  *         right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
+  * @retval PCLK2 frequency
+  */
+uint32_t HAL_RCC_GetPCLK2Freq(void)
+{
+  /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
+  return (HAL_RCC_GetHCLKFreq()>> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> POSITION_VAL(RCC_CFGR_PPRE2)]);
+}
+
+/**
+  * @brief  Configures the RCC_OscInitStruct according to the internal
+  * RCC configuration registers.
+  * @param  RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+  * will be configured.
+  * @retval None
+  */
+__weak void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+  /* Set all possible values for the Oscillator type parameter ---------------*/
+  RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+  /* Get the HSE configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+  }
+  else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+  }
+
+  /* Get the HSI configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+  {
+    RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+  }
+
+  RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
+
+  /* Get the LSE configuration -----------------------------------------------*/
+  if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+  }
+  else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+  }
+
+  /* Get the LSI configuration -----------------------------------------------*/
+  if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+  {
+    RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+  }
+
+  /* Get the PLL configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+  {
+    RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+  }
+  RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+  RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
+  RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN));
+  RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1) >> POSITION_VAL(RCC_PLLCFGR_PLLP));
+  RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> POSITION_VAL(RCC_PLLCFGR_PLLQ));
+}
+
+/**
+  * @brief  Configures the RCC_ClkInitStruct according to the internal
+  * RCC configuration registers.
+  * @param  RCC_ClkInitStruct: pointer to an RCC_ClkInitTypeDef structure that
+  * will be configured.
+  * @param  pFLatency: Pointer on the Flash Latency.
+  * @retval None
+  */
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef  *RCC_ClkInitStruct, uint32_t *pFLatency)
+{
+  /* Set all possible values for the Clock type parameter --------------------*/
+  RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+
+  /* Get the SYSCLK configuration --------------------------------------------*/
+  RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
+
+  /* Get the HCLK configuration ----------------------------------------------*/
+  RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
+
+  /* Get the APB1 configuration ----------------------------------------------*/
+  RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1);
+
+  /* Get the APB2 configuration ----------------------------------------------*/
+  RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3);
+
+  /* Get the Flash Wait State (Latency) configuration ------------------------*/
+  *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
+}
+
+/**
+  * @brief This function handles the RCC CSS interrupt request.
+  * @note This API should be called under the NMI_Handler().
+  * @retval None
+  */
+void HAL_RCC_NMI_IRQHandler(void)
+{
+  /* Check RCC CSSF flag  */
+  if(__HAL_RCC_GET_IT(RCC_IT_CSS))
+  {
+    /* RCC Clock Security System interrupt user callback */
+    HAL_RCC_CSSCallback();
+
+    /* Clear RCC CSS pending bit */
+    __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
+  }
+}
+
+/**
+  * @brief  RCC Clock Security System interrupt callback
+  * @retval None
+  */
+__weak void HAL_RCC_CSSCallback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RCC_CSSCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c
new file mode 100644
index 0000000..37df30e
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c
@@ -0,0 +1,1676 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rcc_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Extension RCC HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities RCC extension peripheral:
+  *           + Extended Peripheral Control functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RCCEx RCCEx
+  * @brief RCCEx HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup RCCEx_Private_Constants
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
+  *  @{
+  */
+
+/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions
+ *  @brief  Extended Peripheral Control functions
+ *
+ at verbatim
+ ===============================================================================
+                ##### Extended Peripheral Control functions  #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the RCC Clocks
+    frequencies.
+    [..]
+    (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
+        select the RTC clock source; in this case the Backup domain will be reset in
+        order to modify the RTC Clock source, as consequence RTC registers (including
+        the backup registers) and RCC_BDCR register are set to their reset values.
+
+ at endverbatim
+  * @{
+  */
+#if defined(STM32F446xx)
+/**
+  * @brief  Initializes the RCC extended peripherals clocks according to the specified
+  *         parameters in the RCC_PeriphCLKInitTypeDef.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         contains the configuration information for the Extended Peripherals
+  *         clocks(I2S, SAI, LTDC RTC and TIM).
+  *
+  * @note   Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+  *         the RTC clock source; in this case the Backup domain will be reset in
+  *         order to modify the RTC Clock source, as consequence RTC registers (including
+  *         the backup registers) and RCC_BDCR register are set to their reset values.
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tickstart = 0;
+  uint32_t tmpreg1 = 0;
+  uint32_t plli2sp = 0;
+  uint32_t plli2sq = 0;
+  uint32_t plli2sr = 0;
+  uint32_t pllsaip = 0;
+  uint32_t pllsaiq = 0;
+  uint32_t plli2sused = 0;
+  uint32_t pllsaiused = 0;
+
+  /* Check the peripheral clock selection parameters */
+  assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+  /*----------------------------------- I2S APB1 configuration ----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1))
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection));
+
+    /* Configure I2S Clock source */
+    __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection);
+    /* Enable the PLLI2S when it's used as clock source for I2S */
+    if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)
+    {
+      plli2sused = 1;
+    }
+  }
+
+  /*----------------------------------- I2S APB2 configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2))
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection));
+
+    /* Configure I2S Clock source */
+    __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection);
+    /* Enable the PLLI2S when it's used as clock source for I2S */
+    if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)
+    {
+      plli2sused = 1;
+    }
+  }
+
+  /*------------------------------------ SAI1 configuration --------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1))
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection));
+
+    /* Configure SAI1 Clock source */
+    __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection);
+    /* Enable the PLLI2S when it's used as clock source for SAI */
+    if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)
+    {
+      plli2sused = 1;
+    }
+    /* Enable the PLLSAI when it's used as clock source for SAI */
+    if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)
+    {
+      pllsaiused = 1;
+    }
+  }
+
+  /*------------------------------------ SAI2 configuration --------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2))
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection));
+
+    /* Configure SAI2 Clock source */
+    __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection);
+
+    /* Enable the PLLI2S when it's used as clock source for SAI */
+    if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)
+    {
+      plli2sused = 1;
+    }
+    /* Enable the PLLSAI when it's used as clock source for SAI */
+    if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)
+    {
+      pllsaiused = 1;
+    }
+  }
+
+  /*------------------------------------ RTC configuration --------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+  {
+    /* Enable Power Clock*/
+    __HAL_RCC_PWR_CLK_ENABLE();
+
+    /* Enable write access to Backup domain */
+    PWR->CR |= PWR_CR_DBP;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((PWR->CR & PWR_CR_DBP) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    /* Reset the Backup domain only if the RTC Clock source selction is modified */
+    if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
+    {
+      /* Store the content of BDCR register before the reset of Backup Domain */
+      tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+      /* RTC Clock selection can be changed only if the Backup Domain is reset */
+      __HAL_RCC_BACKUPRESET_FORCE();
+      __HAL_RCC_BACKUPRESET_RELEASE();
+      /* Restore the Content of BDCR register */
+      RCC->BDCR = tmpreg1;
+
+      /* Wait for LSERDY if LSE was enabled */
+      if(HAL_IS_BIT_SET(tmpreg1, RCC_BDCR_LSERDY))
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait till LSE is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+    }
+  }
+
+  /*------------------------------------ TIM configuration --------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+  {
+    /* Configure Timer Prescaler */
+    __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+  }
+
+  /*------------------------------------- FMPI2C1 Configuration ----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection));
+
+    /* Configure the FMPI2C1 clock source */
+    __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection);
+  }
+
+  /*--------------------------------------- CEC Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection));
+
+    /* Configure the CEC clock source */
+    __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection);
+  }
+
+  /*-------------------------------------- CK48 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CK48) == RCC_PERIPHCLK_CK48)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_CK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection));
+
+    /* Configure the SDIO clock source */
+    __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+
+    /* Enable the PLLSAI when it's used as clock source for CK48 */
+    if(PeriphClkInit->Clk48ClockSelection == RCC_CK48CLKSOURCE_PLLSAIP)
+    {
+      pllsaiused = 1;
+    }
+  }
+
+  /*------------------------------------- SDIO Configuration ------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection));
+
+    /* Configure the SDIO clock source */
+    __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection);
+  }
+
+  /*------------------------------------- SPDIFRX Configuration --------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_SPDIFRXCLKSOURCE(PeriphClkInit->SpdifClockSelection));
+
+    /* Configure the SPDIFRX clock source */
+    __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifClockSelection);
+    /* Enable the PLLI2S when it's used as clock source for SPDIFRX */
+    if(PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP)
+    {
+      plli2sused = 1;
+    }
+  }
+
+  /*-------------------------------------- PLLI2S Configuration --------------*/
+  /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S on APB1,
+     I2S on APB2 or SPDIFRX */
+  if((plli2sused == 1) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S))
+  {
+    /* Disable the PLLI2S */
+    __HAL_RCC_PLLI2S_DISABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLI2S is disabled */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* check for common PLLI2S Parameters */
+    assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM));
+    assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+    /*----------------- In Case of PLLI2S is selected as source clock for I2S -------------------*/
+    if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) ||
+       ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)))
+    {
+      /* check for Parameters */
+      assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+
+      /* Read PLLI2SP/PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */
+      plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1) << 1);
+      plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) � (PLLI2SN/PLLI2SM) */
+      /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR);
+    }
+
+    /*----------------- In Case of PLLI2S is selected as source clock for SAI -------------------*/
+    if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) ||
+       ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)))
+    {
+      /* Check for PLLI2S Parameters */
+      assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+      /* Check for PLLI2S/DIVQ parameters */
+      assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+      /* Read PLLI2SP/PLLI2SR value from PLLI2SCFGR register (this value is not needed for SAI configuration) */
+      plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1) << 1);
+      plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO Input  = PLL_SOURCE/PLLI2SM */
+      /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+      /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, PeriphClkInit->PLLI2S.PLLI2SQ, plli2sr);
+
+      /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+      __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+    }
+
+    /*----------------- In Case of PLLI2S is selected as source clock for SPDIFRX -------------------*/
+    if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) && (PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP))
+    {
+      /* check for Parameters */
+      assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+      /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+      plli2sq = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1) << 1);
+      plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) � (PLLI2SN/PLLI2SM) */
+      /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, plli2sq, plli2sr);
+    }
+
+     /*----------------- In Case of PLLI2S is just selected  -----------------*/
+    if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+    {
+      /* Check for Parameters */
+      assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+      assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+      assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) � (PLLI2SN/PLLI2SM) */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+    }
+
+    /* Enable the PLLI2S */
+    __HAL_RCC_PLLI2S_ENABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLI2S is ready */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /*-------------------------------------- PLLSAI Configuration ---------------------------------*/
+  /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, CK48 or SDIO */
+  if(pllsaiused == 1)
+  {
+    /* Disable PLLSAI Clock */
+    __HAL_RCC_PLLSAI_DISABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLSAI is disabled */
+    while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Check the PLLSAI division factors */
+    assert_param(IS_RCC_PLLSAIM_VALUE(PeriphClkInit->PLLSAI.PLLSAIM));
+    assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+    /*----------------- In Case of PLLSAI is selected as source clock for SAI -------------------*/
+    if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) ||
+       ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)))
+    {
+      /* check for PLLSAIQ Parameter */
+      assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+      /* check for PLLSAI/DIVQ Parameter */
+      assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+      /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+      pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1) << 1);
+      /* PLLSAI_VCO Input  = PLL_SOURCE/PLLM */
+      /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+      /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+      __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, 0);
+
+      /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+      __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+    }
+
+    /*----------------- In Case of PLLSAI is selected as source clock for CK48 -------------------*/
+    /* In Case of PLLI2S is selected as source clock for CK48 */
+    if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CK48) == RCC_PERIPHCLK_CK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CK48CLKSOURCE_PLLSAIP))
+    {
+      /* check for Parameters */
+      assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP));
+      /* Read PLLSAIQ value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+      pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+      /* Configure the PLLSAI division factors */
+      /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) � (PLLI2SN/PLLSAIM) */
+      /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */
+      __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, 0);
+    }
+
+    /* Enable PLLSAI Clock */
+    __HAL_RCC_PLLSAI_ENABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLSAI is ready */
+    while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Get the RCC_PeriphCLKInitTypeDef according to the internal
+  *         RCC configuration registers.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         will be configured.
+  * @retval None
+  */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tempreg;
+
+  /* Set all possible values for the extended clock type parameter------------*/
+  PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\
+                                        RCC_PERIPHCLK_SAI1     | RCC_PERIPHCLK_SAI2     |\
+                                        RCC_PERIPHCLK_TIM      | RCC_PERIPHCLK_RTC      |\
+                                        RCC_PERIPHCLK_CEC      | RCC_PERIPHCLK_FMPI2C1  |\
+                                        RCC_PERIPHCLK_CK48     | RCC_PERIPHCLK_SDIO     |\
+                                        RCC_PERIPHCLK_SPDIFRX;
+
+  /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+  PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SM));
+  PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+  PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1) << 1);
+  PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+  PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+  /* Get the PLLSAI Clock configuration -----------------------------------------------*/
+  PeriphClkInit->PLLSAI.PLLSAIM = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIM));
+  PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
+  PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1) << 1);
+  PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+  /* Get the PLLSAI/PLLI2S division factors -------------------------------------------*/
+  PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLI2SDIVQ));
+  PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLSAIDIVQ));
+
+  /* Get the SAI1 clock configuration ----------------------------------------------*/
+  PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE();
+
+  /* Get the SAI2 clock configuration ----------------------------------------------*/
+  PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE();
+
+  /* Get the I2S APB1 clock configuration ------------------------------------------*/
+  PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE();
+
+  /* Get the I2S APB2 clock configuration ------------------------------------------*/
+  PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE();
+
+  /* Get the RTC Clock configuration -----------------------------------------------*/
+  tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+  PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+  /* Get the CEC clock configuration -----------------------------------------------*/
+  PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE();
+
+  /* Get the FMPI2C1 clock configuration -----------------------------------------------*/
+  PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE();
+
+  /* Get the CK48 clock configuration -----------------------------------------------*/
+  PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+  /* Get the SDIO clock configuration -----------------------------------------------*/
+  PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE();
+
+  /* Get the SPDIFRX clock configuration ----------------------------------------------*/
+  PeriphClkInit->SpdifClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE();
+
+  /* Get the TIM Prescaler configuration --------------------------------------------*/
+  if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+  {
+    PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+  }
+  else
+  {
+    PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+  }
+}
+
+/**
+  * @brief  Return the peripheral clock frequency for a given peripheral(SAI..)
+  * @note   Return 0 if peripheral clock identifier not managed by this API
+  * @param  PeriphClk: Peripheral clock identifier
+  *         This parameter can be one of the following values:
+  *            @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock
+  *            @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock
+  * @retval Frequency in KHz
+  */
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
+{
+  uint32_t tmpreg1 = 0;
+  /* This variable used to store the SAI clock frequency (value in Hz) */
+  uint32_t frequency = 0;
+  /* This variable used to store the VCO Input (value in Hz) */
+  uint32_t vcoinput = 0;
+  /* This variable used to store the SAI clock source */
+  uint32_t saiclocksource = 0;
+  if ((PeriphClk == RCC_PERIPHCLK_SAI1) || (PeriphClk == RCC_PERIPHCLK_SAI2))
+  {
+    saiclocksource = RCC->DCKCFGR;
+    saiclocksource &= (RCC_DCKCFGR_SAI1SRC | RCC_DCKCFGR_SAI2SRC);
+    switch (saiclocksource)
+    {
+    case 0: /* PLLSAI is the clock source for SAI*/
+      {
+        /* Configure the PLLSAI division factor */
+        /* PLLSAI_VCO Input  = PLL_SOURCE/PLLSAIM */
+        if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+        {
+          /* In Case the PLL Source is HSI (Internal Clock) */
+          vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM));
+        }
+        else
+        {
+          /* In Case the PLL Source is HSE (External Clock) */
+          vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM)));
+        }
+        /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+        /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+        tmpreg1 = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24;
+        frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg1);
+
+        /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+        tmpreg1 = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8) + 1);
+        frequency = frequency/(tmpreg1);
+        break;
+      }
+    case RCC_DCKCFGR_SAI1SRC_0: /* PLLI2S is the clock source for SAI*/
+    case RCC_DCKCFGR_SAI2SRC_0: /* PLLI2S is the clock source for SAI*/
+      {
+        /* Configure the PLLI2S division factor */
+        /* PLLI2S_VCO Input  = PLL_SOURCE/PLLI2SM */
+        if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+        {
+          /* In Case the PLL Source is HSI (Internal Clock) */
+          vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+        }
+        else
+        {
+          /* In Case the PLL Source is HSE (External Clock) */
+          vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)));
+        }
+
+        /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+        /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+        tmpreg1 = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24;
+        frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg1);
+
+        /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+        tmpreg1 = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1);
+        frequency = frequency/(tmpreg1);
+        break;
+      }
+    case RCC_DCKCFGR_SAI1SRC_1: /* PLLR is the clock source for SAI*/
+    case RCC_DCKCFGR_SAI2SRC_1: /* PLLR is the clock source for SAI*/
+      {
+        /* Configure the PLLI2S division factor */
+        /* PLL_VCO Input  = PLL_SOURCE/PLLM */
+        if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+        {
+          /* In Case the PLL Source is HSI (Internal Clock) */
+          vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+        }
+        else
+        {
+          /* In Case the PLL Source is HSE (External Clock) */
+          vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+        }
+
+        /* PLL_VCO Output = PLL_VCO Input * PLLN */
+        /* SAI_CLK_x = PLL_VCO Output/PLLR */
+        tmpreg1 = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28;
+        frequency = (vcoinput * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6))/(tmpreg1);
+        break;
+      }
+    case RCC_DCKCFGR_SAI1SRC: /* External clock is the clock source for SAI*/
+      {
+        frequency = EXTERNAL_CLOCK_VALUE;
+        break;
+      }
+    case RCC_DCKCFGR_SAI2SRC: /* PLLSRC(HSE or HSI) is the clock source for SAI*/
+      {
+        if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+        {
+          /* In Case the PLL Source is HSI (Internal Clock) */
+          frequency = (uint32_t)(HSI_VALUE);
+        }
+        else
+        {
+          /* In Case the PLL Source is HSE (External Clock) */
+          frequency = (uint32_t)(HSE_VALUE);
+        }
+        break;
+      }
+    default :
+      {
+        break;
+      }
+    }
+  }
+  return frequency;
+}
+
+#endif /* STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/**
+  * @brief  Initializes the RCC extended peripherals clocks according to the specified
+  *         parameters in the RCC_PeriphCLKInitTypeDef.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         contains the configuration information for the Extended Peripherals
+  *         clocks(I2S, SAI, LTDC RTC and TIM).
+  *
+  * @note   Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+  *         the RTC clock source; in this case the Backup domain will be reset in
+  *         order to modify the RTC Clock source, as consequence RTC registers (including
+  *         the backup registers) and RCC_BDCR register are set to their reset values.
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tickstart = 0;
+  uint32_t tmpreg1 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+  /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------------*/
+
+  /*----------------------- Common configuration SAI/I2S ---------------------------*/
+  /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division
+     factor is common parameters for both peripherals */
+  if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) ||
+     (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S))
+  {
+    /* check for Parameters */
+    assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+    /* Disable the PLLI2S */
+    __HAL_RCC_PLLI2S_DISABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLI2S is disabled */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /*---------------------------- I2S configuration -------------------------------*/
+    /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added
+      only for I2S configuration */
+    if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+    {
+      /* check for Parameters */
+      assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) � (PLLI2SN/PLLM) */
+      /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR);
+    }
+
+    /*---------------------------- SAI configuration -------------------------------*/
+    /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must
+       be added only for SAI configuration */
+    if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S))
+    {
+      /* Check the PLLI2S division factors */
+      assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+      assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+      /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+      tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO Input  = PLL_SOURCE/PLLM */
+      /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+      /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+      __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1);
+      /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+      __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+    }
+
+    /* Enable the PLLI2S */
+    __HAL_RCC_PLLI2S_ENABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLI2S is ready */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/
+
+  /*----------------------- Common configuration SAI/LTDC --------------------*/
+  /* In Case of SAI or LTDC Clock Configuration through PLLSAI, PLLSAIN division
+     factor is common parameters for both peripherals */
+  if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) ||
+     (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC))
+  {
+    /* Check the PLLSAI division factors */
+    assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+    /* Disable PLLSAI Clock */
+    __HAL_RCC_PLLSAI_DISABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLSAI is disabled */
+    while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /*---------------------------- SAI configuration -------------------------*/
+    /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must
+       be added only for SAI configuration */
+    if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI))
+    {
+      assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+      assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+      /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
+      tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+      /* PLLSAI_VCO Input  = PLL_SOURCE/PLLM */
+      /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+      /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+      __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1);
+      /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+      __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+    }
+
+    /*---------------------------- LTDC configuration ------------------------*/
+    if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC))
+    {
+      assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR));
+      assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR));
+
+      /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
+      tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+      /* PLLSAI_VCO Input  = PLL_SOURCE/PLLM */
+      /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+      /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */
+      __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, PeriphClkInit->PLLSAI.PLLSAIR);
+      /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */
+      __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR);
+    }
+    /* Enable PLLSAI Clock */
+    __HAL_RCC_PLLSAI_ENABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLSAI is ready */
+    while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+
+  /*---------------------------- RTC configuration ---------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+  {
+    /* Enable Power Clock*/
+    __HAL_RCC_PWR_CLK_ENABLE();
+
+    /* Enable write access to Backup domain */
+    PWR->CR |= PWR_CR_DBP;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((PWR->CR & PWR_CR_DBP) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    /* Reset the Backup domain only if the RTC Clock source selection is modified */
+    if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
+    {
+      /* Store the content of BDCR register before the reset of Backup Domain */
+      tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+      /* RTC Clock selection can be changed only if the Backup Domain is reset */
+      __HAL_RCC_BACKUPRESET_FORCE();
+      __HAL_RCC_BACKUPRESET_RELEASE();
+      /* Restore the Content of BDCR register */
+      RCC->BDCR = tmpreg1;
+      /* Wait for LSERDY if LSE was enabled */
+      if(HAL_IS_BIT_SET(tmpreg1, RCC_BDCR_LSERDY))
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait till LSE is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+    }
+  }
+
+  /*---------------------------- TIM configuration ---------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+  {
+    __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the RCC_OscInitStruct according to the internal
+  * RCC configuration registers.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         will be configured.
+  * @retval None
+  */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tempreg;
+
+  /* Set all possible values for the extended clock type parameter------------*/
+  PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI | RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC;
+
+  /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+  PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+  PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+  PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+  /* Get the PLLSAI Clock configuration -----------------------------------------------*/
+  PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
+  PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+  PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+  /* Get the PLLSAI/PLLI2S division factors -----------------------------------------------*/
+  PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLI2SDIVQ));
+  PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLSAIDIVQ));
+  PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR);
+  /* Get the RTC Clock configuration -----------------------------------------------*/
+  tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+  PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+  if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+  {
+    PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+  }
+  else
+  {
+    PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+  }
+}
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/**
+  * @brief  Initializes the RCC extended peripherals clocks according to the specified parameters in the
+  *         RCC_PeriphCLKInitTypeDef.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks).
+  *
+  * @note   A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case
+  *         the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup
+  *        domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tickstart = 0;
+  uint32_t tmpreg1 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+  /*---------------------------- I2S configuration ---------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+  {
+    /* check for Parameters */
+    assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+    assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+#if defined(STM32F411xE)
+    assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM));
+#endif /* STM32F411xE */
+    /* Disable the PLLI2S */
+    __HAL_RCC_PLLI2S_DISABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLI2S is disabled */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+
+#if defined(STM32F411xE)
+    /* Configure the PLLI2S division factors */
+    /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) � (PLLI2SN/PLLI2SM) */
+    /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+    __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SR);
+#else
+    /* Configure the PLLI2S division factors */
+    /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) � (PLLI2SN/PLLM) */
+    /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+    __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR);
+#endif /* STM32F411xE */
+
+    /* Enable the PLLI2S */
+    __HAL_RCC_PLLI2S_ENABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLI2S is ready */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /*---------------------------- RTC configuration ---------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+  {
+    /* Enable Power Clock*/
+    __HAL_RCC_PWR_CLK_ENABLE();
+
+    /* Enable write access to Backup domain */
+    PWR->CR |= PWR_CR_DBP;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((PWR->CR & PWR_CR_DBP) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    /* Reset the Backup domain only if the RTC Clock source selection is modified */
+    if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
+    {
+      /* Store the content of BDCR register before the reset of Backup Domain */
+      tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+      /* RTC Clock selection can be changed only if the Backup Domain is reset */
+      __HAL_RCC_BACKUPRESET_FORCE();
+      __HAL_RCC_BACKUPRESET_RELEASE();
+      /* Restore the Content of BDCR register */
+      RCC->BDCR = tmpreg1;
+      /* Wait for LSERDY if LSE was enabled */
+      if(HAL_IS_BIT_SET(tmpreg1, RCC_BDCR_LSERDY))
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait till LSE is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the RCC_OscInitStruct according to the internal
+  * RCC configuration registers.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  * will be configured.
+  * @retval None
+  */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tempreg;
+
+  /* Set all possible values for the extended clock type parameter------------*/
+  PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_RTC;
+
+  /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+  PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+  PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+#if defined(STM32F411xE)
+  PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM);
+#endif /* STM32F411xE */
+  /* Get the RTC Clock configuration -----------------------------------------------*/
+  tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+  PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F411xE) || defined(STM32F446xx)
+/**
+  * @brief  Select LSE mode
+  *
+  * @note   This mode is only available for STM32F411xx devices.
+  *
+  * @param  Mode: specifies the LSE mode.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_LSE_LOWPOWER_MODE:  LSE oscillator in low power mode selection
+  *            @arg RCC_LSE_HIGHDRIVE_MODE: LSE oscillator in High Drive mode selection
+  * @retval None
+  */
+void HAL_RCCEx_SelectLSEMode(uint8_t Mode)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_LSE_MODE(Mode));
+  if(Mode == RCC_LSE_HIGHDRIVE_MODE)
+  {
+    SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD);
+  }
+  else
+  {
+    CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD);
+  }
+}
+
+#endif /* STM32F411xE || STM32F446xx */
+
+#if defined(STM32F446xx)
+/**
+  * @brief  Initializes the RCC Oscillators according to the specified parameters in the
+  *         RCC_OscInitTypeDef.
+  * @param  RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+  *         contains the configuration information for the RCC Oscillators.
+  * @note   The PLL is not disabled when used as system clock.
+  * @note   This function add the PLL/PLLR factor management during PLL configuration this feature is only available in STM32F446xx devices
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+  /*------------------------------- HSE Configuration ------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+    /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE)                                                                     ||\
+      ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)) ||\
+      ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+    {
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+      {
+        return HAL_ERROR;
+      }
+    }
+    else
+    {
+      /* Reset HSEON and HSEBYP bits before configuring the HSE --------------*/
+      __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF);
+
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till HSE is disabled */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+
+      /* Set the new HSE configuration ---------------------------------------*/
+      __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+      /* Check the HSE State */
+      if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF)
+      {
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSE is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSE is bypassed or disabled */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+  /*----------------------------- HSI Configuration --------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+    assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+    /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI)                                                                     ||\
+      ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)) ||\
+      ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+    {
+      /* When HSI is used as system clock it will not disabled */
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+      {
+        return HAL_ERROR;
+      }
+      /* Otherwise, just the calibration is allowed */
+      else
+      {
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+      }
+    }
+    else
+    {
+      /* Check the HSI State */
+      if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
+      {
+        /* Enable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_ENABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSI is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+      }
+      else
+      {
+        /* Disable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_DISABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSI is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+  /*------------------------------ LSI Configuration -------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+    /* Check the LSI State */
+    if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
+    {
+      /* Enable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_ENABLE();
+
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSI is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    else
+    {
+      /* Disable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_DISABLE();
+
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSI is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /*------------------------------ LSE Configuration -------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+    /* Enable Power Clock*/
+    __HAL_RCC_PWR_CLK_ENABLE();
+
+    /* Enable write access to Backup domain */
+    PWR->CR |= PWR_CR_DBP;
+
+    /* Wait for Backup domain Write protection disable */
+    tickstart = HAL_GetTick();
+
+    while((PWR->CR & PWR_CR_DBP) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Reset LSEON and LSEBYP bits before configuring the LSE ----------------*/
+    __HAL_RCC_LSE_CONFIG(RCC_LSE_OFF);
+
+    /* Get Start Tick*/
+    tickstart = HAL_GetTick();
+
+    /* Wait till LSE is ready */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Set the new LSE configuration -----------------------------------------*/
+    __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+    /* Check the LSE State */
+    if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
+    {
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSE is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    else
+    {
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSE is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /*-------------------------------- PLL Configuration -----------------------*/
+  /* Check the parameters */
+  assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+  if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+  {
+    /* Check if the PLL is used as system clock or not */
+    if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+    {
+      if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+      {
+        /* Check the parameters */
+        assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+        assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
+        assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
+        assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
+        assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
+        assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR));
+
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+
+        /* Configure the main PLL clock source, multiplication and division factors. */
+        __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+                             RCC_OscInitStruct->PLL.PLLM,
+                             RCC_OscInitStruct->PLL.PLLN,
+                             RCC_OscInitStruct->PLL.PLLP,
+                             RCC_OscInitStruct->PLL.PLLQ,
+                             RCC_OscInitStruct->PLL.PLLR);
+
+        /* Enable the main PLL. */
+        __HAL_RCC_PLL_ENABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+    else
+    {
+      return HAL_ERROR;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the RCC_OscInitStruct according to the internal
+  * RCC configuration registers.
+  * @param  RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that will be configured.
+  *
+  * @note   This function is only available in case of STM32F446xx devices.
+  * @note   This function add the PLL/PLLR factor management
+  * @retval None
+  */
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+  /* Set all possible values for the Oscillator type parameter ---------------*/
+  RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+  /* Get the HSE configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+  }
+  else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+  }
+
+  /* Get the HSI configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+  {
+    RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+  }
+
+  RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
+
+  /* Get the LSE configuration -----------------------------------------------*/
+  if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+  }
+  else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+  }
+
+  /* Get the LSI configuration -----------------------------------------------*/
+  if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+  {
+    RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+  }
+
+  /* Get the PLL configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+  {
+    RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+  }
+  RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+  RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
+  RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN));
+  RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1) >> POSITION_VAL(RCC_PLLCFGR_PLLP));
+  RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> POSITION_VAL(RCC_PLLCFGR_PLLQ));
+  RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR));
+}
+
+/**
+  * @brief  Returns the SYSCLK frequency
+  *
+  * @note   This function is only available in case of STM32F446xx devices.
+  * @note   This function add the PLL/PLLR System clock source
+  *
+  * @note   The system frequency computed by this function is not the real
+  *         frequency in the chip. It is calculated based on the predefined
+  *         constant and the selected clock source:
+  * @note     If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+  * @note     If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
+  * @note     If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
+  *           or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  * @note     (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *               16 MHz) but the real value may vary depending on the variations
+  *               in voltage and temperature.
+  * @note     (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *                25 MHz), user has to ensure that HSE_VALUE is same as the real
+  *                frequency of the crystal used. Otherwise, this function may
+  *                have wrong result.
+  *
+  * @note   The result of this function could be not correct when using fractional
+  *         value for HSE crystal.
+  *
+  * @note   This function can be used by the user application to compute the
+  *         baudrate for the communication peripherals or configure other parameters.
+  *
+  * @note   Each time SYSCLK changes, this function must be called to update the
+  *         right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+  *
+  *
+  * @retval SYSCLK frequency
+  */
+uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+  uint32_t pllm = 0;
+  uint32_t pllvco = 0;
+  uint32_t pllp = 0;
+  uint32_t pllr = 0;
+  uint32_t sysclockfreq = 0;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  switch (RCC->CFGR & RCC_CFGR_SWS)
+  {
+    case RCC_CFGR_SWS_HSI:  /* HSI used as system clock source */
+    {
+      sysclockfreq = HSI_VALUE;
+       break;
+    }
+    case RCC_CFGR_SWS_HSE:  /* HSE used as system clock  source */
+    {
+      sysclockfreq = HSE_VALUE;
+      break;
+    }
+    case RCC_CFGR_SWS_PLL:  /* PLL/PLLP used as system clock  source */
+    {
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+      SYSCLK = PLL_VCO / PLLP */
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+      }
+      pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> POSITION_VAL(RCC_PLLCFGR_PLLP)) + 1 ) *2);
+
+      sysclockfreq = pllvco/pllp;
+      break;
+    }
+    case RCC_CFGR_SWS_PLLR:  /* PLL/PLLR used as system clock  source */
+    {
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+      SYSCLK = PLL_VCO / PLLR */
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+      }
+      pllr = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR));
+
+      sysclockfreq = pllvco/pllr;
+      break;
+    }
+    default:
+    {
+      sysclockfreq = HSI_VALUE;
+      break;
+    }
+  }
+  return sysclockfreq;
+}
+#endif /* STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c
new file mode 100644
index 0000000..a9873b6
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c
@@ -0,0 +1,515 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rng.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   RNG HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Random Number Generator (RNG) peripheral:
+  *           + Initialization/de-initialization functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+      The RNG HAL driver can be used as follows:
+
+      (#) Enable the RNG controller clock using __HAL_RCC_RNG_CLK_ENABLE() macro
+          in HAL_RNG_MspInit().
+      (#) Activate the RNG peripheral using HAL_RNG_Init() function.
+      (#) Wait until the 32 bit Random Number Generator contains a valid
+          random data using (polling/interrupt) mode.
+      (#) Get the 32 bit random number using HAL_RNG_GenerateRandomNumber() function.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RNG
+  * @{
+  */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+
+/* Private types -------------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup RNG_Private_Constants
+  * @{
+  */
+#define RNG_TIMEOUT_VALUE     2
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions prototypes ----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup RNG_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup RNG_Exported_Functions_Group1
+ *  @brief   Initialization and de-initialization functions
+ *
+ at verbatim
+ ===============================================================================
+          ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the RNG according to the specified parameters
+          in the RNG_InitTypeDef and create the associated handle
+      (+) DeInitialize the RNG peripheral
+      (+) Initialize the RNG MSP
+      (+) DeInitialize RNG MSP
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the RNG peripheral and creates the associated handle.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng)
+{
+  /* Check the RNG handle allocation */
+  if(hrng == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  __HAL_LOCK(hrng);
+
+  if(hrng->State == HAL_RNG_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hrng->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_RNG_MspInit(hrng);
+  }
+
+  /* Change RNG peripheral state */
+  hrng->State = HAL_RNG_STATE_BUSY;
+
+  /* Enable the RNG Peripheral */
+  __HAL_RNG_ENABLE(hrng);
+
+  /* Initialize the RNG state */
+  hrng->State = HAL_RNG_STATE_READY;
+
+  __HAL_UNLOCK(hrng);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the RNG peripheral.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng)
+{
+  /* Check the RNG handle allocation */
+  if(hrng == NULL)
+  {
+    return HAL_ERROR;
+  }
+  /* Disable the RNG Peripheral */
+  CLEAR_BIT(hrng->Instance->CR, RNG_CR_IE | RNG_CR_RNGEN);
+
+  /* Clear RNG interrupt status flags */
+  CLEAR_BIT(hrng->Instance->SR, RNG_SR_CEIS | RNG_SR_SEIS);
+
+  /* DeInit the low level hardware */
+  HAL_RNG_MspDeInit(hrng);
+
+  /* Update the RNG state */
+  hrng->State = HAL_RNG_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hrng);
+
+  /* Return the function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the RNG MSP.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval None
+  */
+__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng)
+{
+  /* NOTE : This function should not be modified. When the callback is needed,
+            function HAL_RNG_MspInit must be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  DeInitializes the RNG MSP.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval None
+  */
+__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng)
+{
+  /* NOTE : This function should not be modified. When the callback is needed,
+            function HAL_RNG_MspDeInit must be implemented in the user file.
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup RNG_Exported_Functions_Group2
+ *  @brief   Peripheral Control functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Get the 32 bit Random number
+      (+) Get the 32 bit Random number with interrupt enabled
+      (+) Handle RNG interrupt request
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Generates a 32-bit random number.
+  * @note   Each time the random number data is read the RNG_FLAG_DRDY flag
+  *         is automatically cleared.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @param  random32bit: pointer to generated random number variable if successful.
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit)
+{
+  uint32_t tickstart = 0;
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process Locked */
+  __HAL_LOCK(hrng);
+
+  /* Check RNG peripheral state */
+  if(hrng->State == HAL_RNG_STATE_READY)
+  {
+    /* Change RNG peripheral state */
+    hrng->State = HAL_RNG_STATE_BUSY;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Check if data register contains valid random data */
+    while(__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RNG_TIMEOUT_VALUE)
+      {
+        hrng->State = HAL_RNG_STATE_ERROR;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrng);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Get a 32bit Random number */
+    hrng->RandomNumber = hrng->Instance->DR;
+    *random32bit = hrng->RandomNumber;
+
+    hrng->State = HAL_RNG_STATE_READY;
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrng);
+
+  return status;
+}
+
+/**
+  * @brief  Generates a 32-bit random number in interrupt mode.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process Locked */
+  __HAL_LOCK(hrng);
+
+  /* Check RNG peripheral state */
+  if(hrng->State == HAL_RNG_STATE_READY)
+  {
+    /* Change RNG peripheral state */
+    hrng->State = HAL_RNG_STATE_BUSY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrng);
+
+    /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */
+    __HAL_RNG_ENABLE_IT(hrng);
+  }
+  else
+  {
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrng);
+
+    status = HAL_ERROR;
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Handles RNG interrupt request.
+  * @note   In the case of a clock error, the RNG is no more able to generate
+  *         random numbers because the PLL48CLK clock is not correct. User has
+  *         to check that the clock controller is correctly configured to provide
+  *         the RNG clock and clear the CEIS bit using __HAL_RNG_CLEAR_IT().
+  *         The clock error has no impact on the previously generated
+  *         random numbers, and the RNG_DR register contents can be used.
+  * @note   In the case of a seed error, the generation of random numbers is
+  *         interrupted as long as the SECS bit is '1'. If a number is
+  *         available in the RNG_DR register, it must not be used because it may
+  *         not have enough entropy. In this case, it is recommended to clear the
+  *         SEIS bit using __HAL_RNG_CLEAR_IT(), then disable and enable
+  *         the RNG peripheral to reinitialize and restart the RNG.
+  * @note   User-written HAL_RNG_ErrorCallback() API is called once whether SEIS
+  *         or CEIS are set.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval None
+
+  */
+void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng)
+{
+  /* RNG clock error interrupt occurred */
+  if((__HAL_RNG_GET_IT(hrng, RNG_IT_CEI) != RESET) ||  (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET))
+  {
+    /* Change RNG peripheral state */
+    hrng->State = HAL_RNG_STATE_ERROR;
+
+    HAL_RNG_ErrorCallback(hrng);
+
+    /* Clear the clock error flag */
+    __HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI|RNG_IT_SEI);
+
+  }
+
+  /* Check RNG data ready interrupt occurred */
+  if(__HAL_RNG_GET_IT(hrng, RNG_IT_DRDY) != RESET)
+  {
+    /* Generate random number once, so disable the IT */
+    __HAL_RNG_DISABLE_IT(hrng);
+
+    /* Get the 32bit Random number (DRDY flag automatically cleared) */
+    hrng->RandomNumber = hrng->Instance->DR;
+
+    if(hrng->State != HAL_RNG_STATE_ERROR)
+    {
+      /* Change RNG peripheral state */
+      hrng->State = HAL_RNG_STATE_READY;
+
+      /* Data Ready callback */
+      HAL_RNG_ReadyDataCallback(hrng, hrng->RandomNumber);
+    }
+  }
+}
+
+/**
+  * @brief  Returns generated random number in polling mode (Obsolete)
+  *         Use HAL_RNG_GenerateRandomNumber() API instead.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval Random value
+  */
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng)
+{
+  if(HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK)
+  {
+    return hrng->RandomNumber;
+  }
+  else
+  {
+    return 0;
+  }
+}
+
+/**
+  * @brief  Returns a 32-bit random number with interrupt enabled (Obsolete),
+  *         Use HAL_RNG_GenerateRandomNumber_IT() API instead.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval 32-bit random number
+  */
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng)
+{
+  uint32_t random32bit = 0;
+
+  /* Process locked */
+  __HAL_LOCK(hrng);
+
+  /* Change RNG peripheral state */
+  hrng->State = HAL_RNG_STATE_BUSY;
+
+  /* Get a 32bit Random number */
+  random32bit = hrng->Instance->DR;
+
+  /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */
+  __HAL_RNG_ENABLE_IT(hrng);
+
+  /* Return the 32 bit random number */
+  return random32bit;
+}
+
+/**
+  * @brief  Read latest generated random number.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval random value
+  */
+uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng)
+{
+  return(hrng->RandomNumber);
+}
+
+/**
+  * @brief  Data Ready callback in non-blocking mode.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @param  random32bit: generated random number.
+  * @retval None
+  */
+__weak void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit)
+{
+  /* NOTE : This function should not be modified. When the callback is needed,
+            function HAL_RNG_ReadyDataCallback must be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  RNG error callbacks.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval None
+  */
+__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng)
+{
+  /* NOTE : This function should not be modified. When the callback is needed,
+            function HAL_RNG_ErrorCallback must be implemented in the user file.
+   */
+}
+/**
+  * @}
+  */
+
+
+/** @addtogroup RNG_Exported_Functions_Group3
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral State functions #####
+ ===============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the RNG state.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval HAL state
+  */
+HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng)
+{
+  return hrng->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c
new file mode 100644
index 0000000..4114d87
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c
@@ -0,0 +1,1545 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rtc.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   RTC HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Real Time Clock (RTC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + RTC Time and Date functions
+  *           + RTC Alarm functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+              ##### Backup Domain Operating Condition #####
+  ==============================================================================
+  [..] The real-time clock (RTC), the RTC backup registers, and the backup
+       SRAM (BKP SRAM) can be powered from the VBAT voltage when the main
+       VDD supply is powered off.
+       To retain the content of the RTC backup registers, backup SRAM, and supply
+       the RTC when VDD is turned off, VBAT pin can be connected to an optional
+       standby voltage supplied by a battery or by another source.
+
+  [..] To allow the RTC operating even when the main digital supply (VDD) is turned
+       off, the VBAT pin powers the following blocks:
+    (#) The RTC
+    (#) The LSE oscillator
+    (#) The backup SRAM when the low power backup regulator is enabled
+    (#) PC13 to PC15 I/Os, plus PI8 I/O (when available)
+
+  [..] When the backup domain is supplied by VDD (analog switch connected to VDD),
+       the following pins are available:
+    (#) PC14 and PC15 can be used as either GPIO or LSE pins
+    (#) PC13 can be used as a GPIO or as the RTC_AF1 pin
+    (#) PI8 can be used as a GPIO or as the RTC_AF2 pin
+
+  [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT
+       because VDD is not present), the following pins are available:
+    (#) PC14 and PC15 can be used as LSE pins only
+    (#) PC13 can be used as the RTC_AF1 pin
+    (#) PI8 can be used as the RTC_AF2 pin
+
+                   ##### Backup Domain Reset #####
+  ==================================================================
+  [..] The backup domain reset sets all RTC registers and the RCC_BDCR register
+       to their reset values. The BKPSRAM is not affected by this reset. The only
+       way to reset the BKPSRAM is through the Flash interface by requesting
+       a protection level change from 1 to 0.
+  [..] A backup domain reset is generated when one of the following events occurs:
+    (#) Software reset, triggered by setting the BDRST bit in the
+        RCC Backup domain control register (RCC_BDCR).
+    (#) VDD or VBAT power on, if both supplies have previously been powered off.
+
+                   ##### Backup Domain Access #####
+  ==================================================================
+  [..] After reset, the backup domain (RTC registers, RTC backup data
+       registers and backup SRAM) is protected against possible unwanted write
+       accesses.
+  [..] To enable access to the RTC Domain and RTC registers, proceed as follows:
+    (+) Enable the Power Controller (PWR) APB1 interface clock using the
+        __HAL_RCC_PWR_CLK_ENABLE() function.
+    (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+    (+) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() function.
+    (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() function.
+
+
+                  ##### How to use this driver #####
+  ==================================================================
+  [..]
+    (+) Enable the RTC domain access (see description in the section above).
+    (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
+        format using the HAL_RTC_Init() function.
+
+  *** Time and Date configuration ***
+  ===================================
+  [..]
+    (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime()
+        and HAL_RTC_SetDate() functions.
+    (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions.
+
+  *** Alarm configuration ***
+  ===========================
+  [..]
+    (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function.
+        You can also configure the RTC Alarm with interrupt mode using the HAL_RTC_SetAlarm_IT() function.
+    (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function.
+
+                  ##### RTC and low power modes #####
+  ==================================================================
+  [..] The MCU can be woken up from a low power mode by an RTC alternate
+       function.
+  [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B),
+       RTC wake-up, RTC tamper event detection and RTC time stamp event detection.
+       These RTC alternate functions can wake up the system from the Stop and
+       Standby low power modes.
+  [..] The system can also wake up from low power modes without depending
+       on an external interrupt (Auto-wake-up mode), by using the RTC alarm
+       or the RTC wake-up events.
+  [..] The RTC provides a programmable time base for waking up from the
+       Stop or Standby mode at regular intervals.
+       Wake-up from STOP and STANDBY modes is possible only when the RTC clock source
+       is LSE or LSI.
+
+   @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RTC RTC
+  * @brief RTC HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RTC_Exported_Functions RTC Exported Functions
+  * @{
+  */
+
+/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+   [..] This section provides functions allowing to initialize and configure the
+         RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable
+         RTC registers Write protection, enter and exit the RTC initialization mode,
+         RTC registers synchronization check and reference clock detection enable.
+         (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base.
+             It is split into 2 programmable prescalers to minimize power consumption.
+             (++) A 7-bit asynchronous prescaler and a 13-bit synchronous prescaler.
+             (++) When both prescalers are used, it is recommended to configure the
+                 asynchronous prescaler to a high value to minimize power consumption.
+         (#) All RTC registers are Write protected. Writing to the RTC registers
+             is enabled by writing a key into the Write Protection register, RTC_WPR.
+         (#) To configure the RTC Calendar, user application should enter
+             initialization mode. In this mode, the calendar counter is stopped
+             and its value can be updated. When the initialization sequence is
+             complete, the calendar restarts counting after 4 RTCCLK cycles.
+         (#) To read the calendar through the shadow registers after Calendar
+             initialization, calendar update or after wake-up from low power modes
+             the software must first clear the RSF flag. The software must then
+             wait until it is set again before reading the calendar, which means
+             that the calendar registers have been correctly copied into the
+             RTC_TR and RTC_DR shadow registers.The HAL_RTC_WaitForSynchro() function
+             implements the above software sequence (RSF clear and RSF check).
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the RTC peripheral
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc)
+{
+  /* Check the RTC peripheral state */
+  if(hrtc == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat));
+  assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv));
+  assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv));
+  assert_param (IS_RTC_OUTPUT(hrtc->Init.OutPut));
+  assert_param (IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity));
+  assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType));
+
+  if(hrtc->State == HAL_RTC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hrtc->Lock = HAL_UNLOCKED;
+    /* Initialize RTC MSP */
+    HAL_RTC_MspInit(hrtc);
+  }
+
+  /* Set RTC state */
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+    /* Set RTC state */
+    hrtc->State = HAL_RTC_STATE_ERROR;
+
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Clear RTC_CR FMT, OSEL and POL Bits */
+    hrtc->Instance->CR &= ((uint32_t)~(RTC_CR_FMT | RTC_CR_OSEL | RTC_CR_POL));
+    /* Set RTC_CR register */
+    hrtc->Instance->CR |= (uint32_t)(hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity);
+
+    /* Configure the RTC PRER */
+    hrtc->Instance->PRER = (uint32_t)(hrtc->Init.SynchPrediv);
+    hrtc->Instance->PRER |= (uint32_t)(hrtc->Init.AsynchPrediv << 16);
+
+    /* Exit Initialization mode */
+    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+
+    hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_ALARMOUTTYPE;
+    hrtc->Instance->TAFCR |= (uint32_t)(hrtc->Init.OutPutType);
+
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+    /* Set RTC state */
+    hrtc->State = HAL_RTC_STATE_READY;
+
+    return HAL_OK;
+  }
+}
+
+/**
+  * @brief  DeInitializes the RTC peripheral
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @note   This function doesn't reset the RTC Backup Data registers.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc)
+{
+  uint32_t tickstart = 0;
+
+  /* Set RTC state */
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+    /* Set RTC state */
+    hrtc->State = HAL_RTC_STATE_ERROR;
+
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Reset TR, DR and CR registers */
+    hrtc->Instance->TR = (uint32_t)0x00000000;
+    hrtc->Instance->DR = (uint32_t)0x00002101;
+    /* Reset All CR bits except CR[2:0] */
+    hrtc->Instance->CR &= (uint32_t)0x00000007;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till WUTWF flag is set and if Time out is reached exit */
+    while(((hrtc->Instance->ISR) & RTC_ISR_WUTWF) == (uint32_t)RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        /* Set RTC state */
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Reset all RTC CR register bits */
+    hrtc->Instance->CR &= (uint32_t)0x00000000;
+    hrtc->Instance->WUTR = (uint32_t)0x0000FFFF;
+    hrtc->Instance->PRER = (uint32_t)0x007F00FF;
+    hrtc->Instance->CALIBR = (uint32_t)0x00000000;
+    hrtc->Instance->ALRMAR = (uint32_t)0x00000000;
+    hrtc->Instance->ALRMBR = (uint32_t)0x00000000;
+    hrtc->Instance->SHIFTR = (uint32_t)0x00000000;
+    hrtc->Instance->CALR = (uint32_t)0x00000000;
+    hrtc->Instance->ALRMASSR = (uint32_t)0x00000000;
+    hrtc->Instance->ALRMBSSR = (uint32_t)0x00000000;
+
+    /* Reset ISR register and exit initialization mode */
+    hrtc->Instance->ISR = (uint32_t)0x00000000;
+
+    /* Reset Tamper and alternate functions configuration register */
+    hrtc->Instance->TAFCR = 0x00000000;
+
+    /* If  RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+    if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+    {
+      if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_ERROR;
+
+        return HAL_ERROR;
+      }
+    }
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* De-Initialize RTC MSP */
+  HAL_RTC_MspDeInit(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the RTC MSP.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the RTC MSP.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions
+ *  @brief   RTC Time and Date functions
+ *
+ at verbatim
+ ===============================================================================
+                 ##### RTC Time and Date functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Time and Date features
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sets RTC current time.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTime: Pointer to Time structure
+  * @param  Format: Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN: Binary data format
+  *            @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+  uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving));
+  assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  if(Format == RTC_FORMAT_BIN)
+  {
+    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+    {
+      assert_param(IS_RTC_HOUR12(sTime->Hours));
+      assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+    }
+    else
+    {
+      sTime->TimeFormat = 0x00;
+      assert_param(IS_RTC_HOUR24(sTime->Hours));
+    }
+    assert_param(IS_RTC_MINUTES(sTime->Minutes));
+    assert_param(IS_RTC_SECONDS(sTime->Seconds));
+
+    tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(sTime->Hours) << 16) | \
+                        ((uint32_t)RTC_ByteToBcd2(sTime->Minutes) << 8) | \
+                        ((uint32_t)RTC_ByteToBcd2(sTime->Seconds)) | \
+                        (((uint32_t)sTime->TimeFormat) << 16));
+  }
+  else
+  {
+    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+    {
+      tmpreg = RTC_Bcd2ToByte(sTime->Hours);
+      assert_param(IS_RTC_HOUR12(tmpreg));
+      assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+    }
+    else
+    {
+      sTime->TimeFormat = 0x00;
+      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours)));
+    }
+    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes)));
+    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds)));
+    tmpreg = (((uint32_t)(sTime->Hours) << 16) | \
+              ((uint32_t)(sTime->Minutes) << 8) | \
+              ((uint32_t)sTime->Seconds) | \
+              ((uint32_t)(sTime->TimeFormat) << 16));
+  }
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+    /* Set RTC state */
+    hrtc->State = HAL_RTC_STATE_ERROR;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrtc);
+
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Set the RTC_TR register */
+    hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK);
+
+    /* Clear the bits to be configured */
+    hrtc->Instance->CR &= (uint32_t)~RTC_CR_BCK;
+
+    /* Configure the RTC_CR register */
+    hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation);
+
+    /* Exit Initialization mode */
+    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+
+    /* If  CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+    if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+    {
+      if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_ERROR;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_ERROR;
+      }
+    }
+
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+   hrtc->State = HAL_RTC_STATE_READY;
+
+   __HAL_UNLOCK(hrtc);
+
+   return HAL_OK;
+  }
+}
+
+/**
+  * @brief  Gets RTC current time.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTime: Pointer to Time structure
+  * @param  Format: Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN: Binary data format
+  *            @arg RTC_FORMAT_BCD: BCD data format
+  * @note  You can use SubSeconds and SecondFraction (sTime structure fields returned) to convert SubSeconds
+  *        value in second fraction ratio with time unit following generic formula:
+  *        Second fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit
+  *        This conversion can be performed only if no shift operation is pending (ie. SHFP=0) when PREDIV_S >= SS
+  * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values
+  *        in the higher-order calendar shadow registers to ensure consistency between the time and date values.
+  *        Reading RTC current time locks the values in calendar shadow registers until current date is read.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+
+  /* Get subseconds structure field from the corresponding register */
+  sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR);
+
+  /* Get SecondFraction structure field from the corresponding register field */
+  sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S);
+
+  /* Get the TR register */
+  tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK);
+
+  /* Fill the structure fields with the read parameters */
+  sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16);
+  sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >>8);
+  sTime->Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU));
+  sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16);
+
+  /* Check the input parameters format */
+  if(Format == RTC_FORMAT_BIN)
+  {
+    /* Convert the time structure parameters to Binary format */
+    sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours);
+    sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes);
+    sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets RTC current date.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sDate: Pointer to date structure
+  * @param  Format: specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN: Binary data format
+  *            @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+  uint32_t datetmpreg = 0;
+
+ /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  if((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10) == 0x10))
+  {
+    sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10)) + (uint8_t)0x0A);
+  }
+
+  assert_param(IS_RTC_WEEKDAY(sDate->WeekDay));
+
+  if(Format == RTC_FORMAT_BIN)
+  {
+    assert_param(IS_RTC_YEAR(sDate->Year));
+    assert_param(IS_RTC_MONTH(sDate->Month));
+    assert_param(IS_RTC_DATE(sDate->Date));
+
+   datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << 16) | \
+                 ((uint32_t)RTC_ByteToBcd2(sDate->Month) << 8) | \
+                 ((uint32_t)RTC_ByteToBcd2(sDate->Date)) | \
+                 ((uint32_t)sDate->WeekDay << 13));
+  }
+  else
+  {
+    assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year)));
+    datetmpreg = RTC_Bcd2ToByte(sDate->Month);
+    assert_param(IS_RTC_MONTH(datetmpreg));
+    datetmpreg = RTC_Bcd2ToByte(sDate->Date);
+    assert_param(IS_RTC_DATE(datetmpreg));
+
+    datetmpreg = ((((uint32_t)sDate->Year) << 16) | \
+                  (((uint32_t)sDate->Month) << 8) | \
+                  ((uint32_t)sDate->Date) | \
+                  (((uint32_t)sDate->WeekDay) << 13));
+  }
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+    /* Set RTC state*/
+    hrtc->State = HAL_RTC_STATE_ERROR;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrtc);
+
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Set the RTC_DR register */
+    hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK);
+
+    /* Exit Initialization mode */
+    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+
+    /* If  CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+    if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+    {
+      if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_ERROR;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_ERROR;
+      }
+    }
+
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+    hrtc->State = HAL_RTC_STATE_READY ;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrtc);
+
+    return HAL_OK;
+  }
+}
+
+/**
+  * @brief  Gets RTC current date.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sDate: Pointer to Date structure
+  * @param  Format: Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN:  Binary data format
+  *            @arg RTC_FORMAT_BCD:  BCD data format
+  * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values
+  * in the higher-order calendar shadow registers to ensure consistency between the time and date values.
+  * Reading RTC current time locks the values in calendar shadow registers until Current date is read.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+  uint32_t datetmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+
+  /* Get the DR register */
+  datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK);
+
+  /* Fill the structure fields with the read parameters */
+  sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> 16);
+  sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> 8);
+  sDate->Date = (uint8_t)(datetmpreg & (RTC_DR_DT | RTC_DR_DU));
+  sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> 13);
+
+  /* Check the input parameters format */
+  if(Format == RTC_FORMAT_BIN)
+  {
+    /* Convert the date structure parameters to Binary format */
+    sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year);
+    sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month);
+    sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date);
+  }
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions
+ *  @brief   RTC Alarm functions
+ *
+ at verbatim
+ ===============================================================================
+                 ##### RTC Alarm functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Alarm feature
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Sets the specified RTC Alarm.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sAlarm: Pointer to Alarm structure
+  * @param  Format: Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_FORMAT_BIN: Binary data format
+  *             @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+  uint32_t tickstart = 0;
+  uint32_t tmpreg = 0, subsecondtmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+  assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
+  assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  if(Format == RTC_FORMAT_BIN)
+  {
+    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+    {
+      assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    }
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00;
+      assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+    }
+    assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+    assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+    if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+    }
+    else
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+    }
+
+    tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24) | \
+              ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+              ((uint32_t)sAlarm->AlarmMask));
+  }
+  else
+  {
+    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+    {
+      tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+      assert_param(IS_RTC_HOUR12(tmpreg));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    }
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00;
+      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+    }
+
+    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+    if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg));
+    }
+    else
+    {
+      tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg));
+    }
+
+    tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16) | \
+              ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8) | \
+              ((uint32_t) sAlarm->AlarmTime.Seconds) | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
+              ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24) | \
+              ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+              ((uint32_t)sAlarm->AlarmMask));
+  }
+
+  /* Configure the Alarm A or Alarm B Sub Second registers */
+  subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Configure the Alarm register */
+  if(sAlarm->Alarm == RTC_ALARM_A)
+  {
+    /* Disable the Alarm A interrupt */
+    __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+    /* In case of interrupt mode is used, the interrupt source must disabled */
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+    /* Configure the Alarm A Sub Second register */
+    hrtc->Instance->ALRMASSR = subsecondtmpreg;
+    /* Configure the Alarm state: Enable Alarm */
+    __HAL_RTC_ALARMA_ENABLE(hrtc);
+  }
+  else
+  {
+    /* Disable the Alarm B interrupt */
+    __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+    /* In case of interrupt mode is used, the interrupt source must disabled */
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
+    /* Configure the Alarm B Sub Second register */
+    hrtc->Instance->ALRMBSSR = subsecondtmpreg;
+    /* Configure the Alarm state: Enable Alarm */
+    __HAL_RTC_ALARMB_ENABLE(hrtc);
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets the specified RTC Alarm with Interrupt
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sAlarm: Pointer to Alarm structure
+  * @param  Format: Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_FORMAT_BIN: Binary data format
+  *             @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+  uint32_t tickstart = 0;
+  uint32_t tmpreg = 0, subsecondtmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+  assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
+  assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  if(Format == RTC_FORMAT_BIN)
+  {
+    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+    {
+      assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    }
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00;
+      assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+    }
+    assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+    assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+    if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+    }
+    else
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+    }
+    tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24) | \
+              ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+              ((uint32_t)sAlarm->AlarmMask));
+  }
+  else
+  {
+    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+    {
+      tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+      assert_param(IS_RTC_HOUR12(tmpreg));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    }
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00;
+      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+    }
+
+    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+    if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg));
+    }
+    else
+    {
+      tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg));
+    }
+    tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16) | \
+              ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8) | \
+              ((uint32_t) sAlarm->AlarmTime.Seconds) | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
+              ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24) | \
+              ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+              ((uint32_t)sAlarm->AlarmMask));
+  }
+  /* Configure the Alarm A or Alarm B Sub Second registers */
+  subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Configure the Alarm register */
+  if(sAlarm->Alarm == RTC_ALARM_A)
+  {
+    /* Disable the Alarm A interrupt */
+    __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+    /* Clear flag alarm A */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+    /* Configure the Alarm A Sub Second register */
+    hrtc->Instance->ALRMASSR = subsecondtmpreg;
+    /* Configure the Alarm state: Enable Alarm */
+    __HAL_RTC_ALARMA_ENABLE(hrtc);
+    /* Configure the Alarm interrupt */
+    __HAL_RTC_ALARM_ENABLE_IT(hrtc,RTC_IT_ALRA);
+  }
+  else
+  {
+    /* Disable the Alarm B interrupt */
+    __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+    /* Clear flag alarm B */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
+    /* Configure the Alarm B Sub Second register */
+    hrtc->Instance->ALRMBSSR = subsecondtmpreg;
+    /* Configure the Alarm state: Enable Alarm */
+    __HAL_RTC_ALARMB_ENABLE(hrtc);
+    /* Configure the Alarm interrupt */
+    __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB);
+  }
+
+  /* RTC Alarm Interrupt Configuration: EXTI configuration */
+  __HAL_RTC_ALARM_EXTI_ENABLE_IT();
+
+  EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT;
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivate the specified RTC Alarm
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Alarm: Specifies the Alarm.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_ALARM_A:  AlarmA
+  *            @arg RTC_ALARM_B:  AlarmB
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_ALARM(Alarm));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  if(Alarm == RTC_ALARM_A)
+  {
+    /* AlarmA */
+    __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+    /* In case of interrupt mode is used, the interrupt source must disabled */
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  else
+  {
+    /* AlarmB */
+    __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+    /* In case of interrupt mode is used, the interrupt source must disabled */
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc,RTC_IT_ALRB);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Gets the RTC Alarm value and masks.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sAlarm: Pointer to Date structure
+  * @param  Alarm: Specifies the Alarm.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_ALARM_A: AlarmA
+  *             @arg RTC_ALARM_B: AlarmB
+  * @param  Format: Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_FORMAT_BIN: Binary data format
+  *             @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format)
+{
+  uint32_t tmpreg = 0, subsecondtmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_ALARM(Alarm));
+
+  if(Alarm == RTC_ALARM_A)
+  {
+    /* AlarmA */
+    sAlarm->Alarm = RTC_ALARM_A;
+
+    tmpreg = (uint32_t)(hrtc->Instance->ALRMAR);
+    subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR ) & RTC_ALRMASSR_SS);
+  }
+  else
+  {
+    sAlarm->Alarm = RTC_ALARM_B;
+
+    tmpreg = (uint32_t)(hrtc->Instance->ALRMBR);
+    subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS);
+  }
+
+  /* Fill the structure with the read parameters */
+  sAlarm->AlarmTime.Hours = (uint32_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> 16);
+  sAlarm->AlarmTime.Minutes = (uint32_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> 8);
+  sAlarm->AlarmTime.Seconds = (uint32_t)(tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU));
+  sAlarm->AlarmTime.TimeFormat = (uint32_t)((tmpreg & RTC_ALRMAR_PM) >> 16);
+  sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg;
+  sAlarm->AlarmDateWeekDay = (uint32_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> 24);
+  sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL);
+  sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL);
+
+  if(Format == RTC_FORMAT_BIN)
+  {
+    sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+    sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes);
+    sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds);
+    sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles Alarm interrupt request.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef* hrtc)
+{
+  if(__HAL_RTC_ALARM_GET_IT(hrtc, RTC_IT_ALRA))
+  {
+    /* Get the status of the Interrupt */
+    if((uint32_t)(hrtc->Instance->CR & RTC_IT_ALRA) != (uint32_t)RESET)
+    {
+      /* AlarmA callback */
+      HAL_RTC_AlarmAEventCallback(hrtc);
+
+      /* Clear the Alarm interrupt pending bit */
+      __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRAF);
+    }
+  }
+
+  if(__HAL_RTC_ALARM_GET_IT(hrtc, RTC_IT_ALRB))
+  {
+    /* Get the status of the Interrupt */
+    if((uint32_t)(hrtc->Instance->CR & RTC_IT_ALRB) != (uint32_t)RESET)
+    {
+      /* AlarmB callback */
+      HAL_RTCEx_AlarmBEventCallback(hrtc);
+
+      /* Clear the Alarm interrupt pending bit */
+      __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRBF);
+    }
+  }
+
+  /* Clear the EXTI's line Flag for RTC Alarm */
+  __HAL_RTC_ALARM_EXTI_CLEAR_FLAG();
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+  * @brief  Alarm A callback.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_AlarmAEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  This function handles AlarmA Polling request.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+  while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == RESET)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Clear the Alarm interrupt pending bit */
+  __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions
+ *  @brief   Peripheral Control functions
+ *
+ at verbatim
+ ===============================================================================
+                     ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Wait for RTC Time and Date Synchronization
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are
+  *         synchronized with RTC APB clock.
+  * @note   The RTC Resynchronization mode is write protected, use the
+  *         __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+  * @note   To read the calendar through the shadow registers after Calendar
+  *         initialization, calendar update or after wake-up from low power modes
+  *         the software must first clear the RSF flag.
+  *         The software must then wait until it is set again before reading
+  *         the calendar, which means that the calendar registers have been
+  *         correctly copied into the RTC_TR and RTC_DR shadow registers.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc)
+{
+  uint32_t tickstart = 0;
+
+  /* Clear RSF flag */
+  hrtc->Instance->ISR &= (uint32_t)RTC_RSF_MASK;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+  /* Wait the registers to be synchronised */
+  while((hrtc->Instance->ISR & RTC_ISR_RSF) == (uint32_t)RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+ ===============================================================================
+                     ##### Peripheral State functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Get RTC state
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Returns the RTC state.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL state
+  */
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef* hrtc)
+{
+  return hrtc->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  Enters the RTC Initialization mode.
+  * @note   The RTC Initialization mode is write protected, use the
+  *         __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc)
+{
+  uint32_t tickstart = 0;
+
+  /* Check if the Initialization mode is set */
+  if((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
+  {
+    /* Set the Initialization mode */
+    hrtc->Instance->ISR = (uint32_t)RTC_INIT_MASK;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC is in INIT state and if Time out is reached exit */
+    while((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Converts a 2 digit decimal to BCD format.
+  * @param  Value: Byte to be converted
+  * @retval Converted byte
+  */
+uint8_t RTC_ByteToBcd2(uint8_t Value)
+{
+  uint32_t bcdhigh = 0;
+
+  while(Value >= 10)
+  {
+    bcdhigh++;
+    Value -= 10;
+  }
+
+  return  ((uint8_t)(bcdhigh << 4) | Value);
+}
+
+/**
+  * @brief  Converts from 2 digit BCD to Binary.
+  * @param  Value: BCD value to be converted
+  * @retval Converted word
+  */
+uint8_t RTC_Bcd2ToByte(uint8_t Value)
+{
+  uint32_t tmp = 0;
+  tmp = ((uint8_t)(Value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10;
+  return (tmp + (Value & (uint8_t)0x0F));
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c
new file mode 100644
index 0000000..cafbe8a
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c
@@ -0,0 +1,1710 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rtc_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   RTC HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Real Time Clock (RTC) Extension peripheral:
+  *           + RTC Time Stamp functions
+  *           + RTC Tamper functions
+  *           + RTC Wake-up functions
+  *           + Extension Control functions
+  *           + Extension RTC features functions
+  *
+  @verbatim
+  ==============================================================================
+                  ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    (+) Enable the RTC domain access.
+    (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
+        format using the HAL_RTC_Init() function.
+
+  *** RTC Wake-up configuration ***
+  ================================
+  [..]
+    (+) To configure the RTC Wake-up Clock source and Counter use the HAL_RTC_SetWakeUpTimer()
+        function. You can also configure the RTC Wake-up timer in interrupt mode
+        using the HAL_RTC_SetWakeUpTimer_IT() function.
+    (+) To read the RTC Wake-up Counter register, use the HAL_RTC_GetWakeUpTimer()
+        function.
+
+  *** TimeStamp configuration ***
+  ===============================
+  [..]
+    (+) Configure the RTC_AFx trigger and enable the RTC TimeStamp using the
+        HAL_RTC_SetTimeStamp() function. You can also configure the RTC TimeStamp with
+        interrupt mode using the HAL_RTC_SetTimeStamp_IT() function.
+    (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTC_GetTimeStamp()
+        function.
+    (+) The TIMESTAMP alternate function can be mapped either to RTC_AF1 (PC13)
+        or RTC_AF2 (PI8 or PA0 only for STM32F446xx devices) depending on the value of TSINSEL bit in
+        RTC_TAFCR register. The corresponding pin is also selected by HAL_RTC_SetTimeStamp()
+        or HAL_RTC_SetTimeStamp_IT() function.
+
+  *** Tamper configuration ***
+  ============================
+  [..]
+    (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge
+        or Level according to the Tamper filter (if equal to 0 Edge else Level)
+        value, sampling frequency, precharge or discharge and Pull-UP using the
+        HAL_RTC_SetTamper() function. You can configure RTC Tamper in interrupt
+        mode using HAL_RTC_SetTamper_IT() function.
+    (+) The TAMPER1 alternate function can be mapped either to RTC_AF1 (PC13)
+        or RTC_AF2 (PI8 or PA0 only for STM32F446xx devices) depending on the value of TAMP1INSEL bit in
+        RTC_TAFCR register. The corresponding pin is also selected by HAL_RTC_SetTamper()
+        or HAL_RTC_SetTamper_IT() function.
+
+  *** Backup Data Registers configuration ***
+  ===========================================
+  [..]
+    (+) To write to the RTC Backup Data registers, use the HAL_RTC_BKUPWrite()
+        function.
+    (+) To read the RTC Backup Data registers, use the HAL_RTC_BKUPRead()
+        function.
+
+   @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RTCEx RTCEx
+  * @brief RTC HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+  * @{
+  */
+
+/** @defgroup RTCEx_Exported_Functions_Group1 RTC TimeStamp and Tamper functions
+ *  @brief   RTC TimeStamp and Tamper functions
+ *
+ at verbatim
+ ===============================================================================
+                 ##### RTC TimeStamp and Tamper functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure TimeStamp feature
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sets TimeStamp.
+  * @note   This API must be called before enabling the TimeStamp feature.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  TimeStampEdge: Specifies the pin edge on which the TimeStamp is
+  *         activated.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
+  *                                        rising edge of the related pin.
+  *             @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
+  *                                         falling edge of the related pin.
+  * @param  RTC_TimeStampPin: specifies the RTC TimeStamp Pin.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.
+  *             @arg RTC_TIMESTAMPPIN_POS1: PI8/PA0 is selected as RTC TimeStamp Pin.
+  *             (PI8 for all STM32 devices except for STM32F446xx devices the PA0 is used)
+  *             @arg RTC_TIMESTAMPPIN_PA0: PA0 is selected as RTC TimeStamp Pin only for STM32F446xx devices
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
+  assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Get the RTC_CR register and clear the bits to be configured */
+  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+  tmpreg|= TimeStampEdge;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL;
+  hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin);
+
+  /* Configure the Time Stamp TSEDGE and Enable bits */
+  hrtc->Instance->CR = (uint32_t)tmpreg;
+
+  __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets TimeStamp with Interrupt.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @note   This API must be called before enabling the TimeStamp feature.
+  * @param  TimeStampEdge: Specifies the pin edge on which the TimeStamp is
+  *         activated.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
+  *                                        rising edge of the related pin.
+  *             @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
+  *                                         falling edge of the related pin.
+  * @param  RTC_TimeStampPin: Specifies the RTC TimeStamp Pin.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_TIMESTAMPPIN_PC13: PC13 is selected as RTC TimeStamp Pin.
+  *             @arg RTC_TIMESTAMPPIN_PI8: PI8 is selected as RTC TimeStamp Pin. (not applicable in the case of STM32F446xx devices)
+  *             @arg RTC_TIMESTAMPPIN_PA0: PA0 is selected as RTC TimeStamp Pin only for STM32F446xx devices
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
+  assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Get the RTC_CR register and clear the bits to be configured */
+  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+  tmpreg |= TimeStampEdge;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Configure the Time Stamp TSEDGE and Enable bits */
+  hrtc->Instance->CR = (uint32_t)tmpreg;
+
+  hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL;
+  hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin);
+
+  __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+
+  /* Enable IT timestamp */
+  __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc,RTC_IT_TS);
+
+  /* RTC timestamp Interrupt Configuration: EXTI configuration */
+  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
+
+  EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates TimeStamp.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc)
+{
+  uint32_t tmpreg = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* In case of interrupt mode is used, the interrupt source must disabled */
+  __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS);
+
+  /* Get the RTC_CR register and clear the bits to be configured */
+  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+
+  /* Configure the Time Stamp TSEDGE and Enable bits */
+  hrtc->Instance->CR = (uint32_t)tmpreg;
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Gets the RTC TimeStamp value.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTimeStamp: Pointer to Time structure
+  * @param  sTimeStampDate: Pointer to Date structure
+  * @param  Format: specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             RTC_FORMAT_BIN: Binary data format
+  *             RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef* sTimeStamp, RTC_DateTypeDef* sTimeStampDate, uint32_t Format)
+{
+  uint32_t tmptime = 0, tmpdate = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+
+  /* Get the TimeStamp time and date registers values */
+  tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK);
+  tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK);
+
+  /* Fill the Time structure fields with the read parameters */
+  sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16);
+  sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8);
+  sTimeStamp->Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU));
+  sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16);
+  sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR;
+
+  /* Fill the Date structure fields with the read parameters */
+  sTimeStampDate->Year = 0;
+  sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8);
+  sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU));
+  sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13);
+
+  /* Check the input parameters format */
+  if(Format == RTC_FORMAT_BIN)
+  {
+    /* Convert the TimeStamp structure parameters to Binary format */
+    sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours);
+    sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes);
+    sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds);
+
+    /* Convert the DateTimeStamp structure parameters to Binary format */
+    sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month);
+    sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date);
+    sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay);
+  }
+
+  /* Clear the TIMESTAMP Flag */
+  __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets Tamper
+  * @note   By calling this API we disable the tamper interrupt for all tampers.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTamper: Pointer to Tamper Structure.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_TAMPER(sTamper->Tamper));
+  assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection));
+  assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
+  assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
+  assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
+  assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+  assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+  assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
+  {
+    sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1);
+  }
+
+  tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->PinSelection | (uint32_t)sTamper->Trigger  |\
+            (uint32_t)sTamper->Filter | (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\
+            (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
+
+  hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1) | (uint32_t)RTC_TAFCR_TAMPTS |\
+                                       (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\
+                                       (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPINSEL | (uint32_t)RTC_TAFCR_TAMPIE);
+
+  hrtc->Instance->TAFCR |= tmpreg;
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets Tamper with interrupt.
+  * @note   By calling this API we force the tamper interrupt for all tampers.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTamper: Pointer to RTC Tamper.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_TAMPER(sTamper->Tamper));
+  assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection));
+  assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
+  assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
+  assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
+  assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+  assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+  assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Configure the tamper trigger */
+  if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
+  {
+    sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1);
+  }
+
+  tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->PinSelection | (uint32_t)sTamper->Trigger  |\
+            (uint32_t)sTamper->Filter | (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\
+            (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
+
+  hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1) | (uint32_t)RTC_TAFCR_TAMPTS |\
+                                       (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\
+                                       (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPINSEL);
+
+  hrtc->Instance->TAFCR |= tmpreg;
+
+  /* Configure the Tamper Interrupt in the RTC_TAFCR */
+  hrtc->Instance->TAFCR |= (uint32_t)RTC_TAFCR_TAMPIE;
+
+  /* RTC Tamper Interrupt Configuration: EXTI configuration */
+  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
+
+  EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates Tamper.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Tamper: Selected tamper pin.
+  *          This parameter can be RTC_Tamper_1 and/or RTC_TAMPER_2.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper)
+{
+  assert_param(IS_RTC_TAMPER(Tamper));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the selected Tamper pin */
+  hrtc->Instance->TAFCR &= (uint32_t)~Tamper;
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles TimeStamp interrupt request.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+  if(__HAL_RTC_TIMESTAMP_GET_IT(hrtc, RTC_IT_TS))
+  {
+    /* Get the status of the Interrupt */
+    if((uint32_t)(hrtc->Instance->CR & RTC_IT_TS) != (uint32_t)RESET)
+    {
+      /* TIMESTAMP callback */
+      HAL_RTCEx_TimeStampEventCallback(hrtc);
+
+      /* Clear the TIMESTAMP interrupt pending bit */
+      __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc,RTC_FLAG_TSF);
+    }
+  }
+
+  /* Get the status of the Interrupt */
+  if(__HAL_RTC_TAMPER_GET_IT(hrtc,RTC_IT_TAMP1))
+  {
+    /* Get the TAMPER Interrupt enable bit and pending bit */
+    if(((hrtc->Instance->TAFCR & (RTC_TAFCR_TAMPIE))) != (uint32_t)RESET)
+    {
+      /* Tamper callback */
+      HAL_RTCEx_Tamper1EventCallback(hrtc);
+
+      /* Clear the Tamper interrupt pending bit */
+      __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
+    }
+  }
+
+  /* Get the status of the Interrupt */
+  if(__HAL_RTC_TAMPER_GET_IT(hrtc, RTC_IT_TAMP2))
+  {
+    /* Get the TAMPER Interrupt enable bit and pending bit */
+    if(((hrtc->Instance->TAFCR & RTC_TAFCR_TAMPIE)) != (uint32_t)RESET)
+    {
+      /* Tamper callback */
+      HAL_RTCEx_Tamper2EventCallback(hrtc);
+
+      /* Clear the Tamper interrupt pending bit */
+      __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
+    }
+  }
+  /* Clear the EXTI's Flag for RTC TimeStamp and Tamper */
+  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG();
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+  * @brief  TimeStamp callback.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_TimeStampEventCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  Tamper 1 callback.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_Tamper1EventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tamper 2 callback.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_Tamper2EventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  This function handles TimeStamp polling request.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == RESET)
+  {
+    if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != RESET)
+    {
+      /* Clear the TIMESTAMP Overrun Flag */
+      __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);
+
+      /* Change TIMESTAMP state */
+      hrtc->State = HAL_RTC_STATE_ERROR;
+
+      return HAL_ERROR;
+    }
+
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles Tamper1 Polling.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Get the status of the Interrupt */
+  while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F)== RESET)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Clear the Tamper Flag */
+  __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles Tamper2 Polling.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Get the status of the Interrupt */
+  while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) == RESET)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Clear the Tamper Flag */
+  __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP2F);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Exported_Functions_Group2 RTC Wake-up functions
+ *  @brief   RTC Wake-up functions
+ *
+ at verbatim
+ ===============================================================================
+                        ##### RTC Wake-up functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Wake-up feature
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sets wake up timer.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  WakeUpCounter: Wake up counter
+  * @param  WakeUpClock: Wake up clock
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
+  assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+  while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+    {
+      /* Enable the write protection for RTC registers */
+      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+      hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hrtc);
+
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Clear the Wake-up Timer clock source bits in CR register */
+  hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+  /* Configure the clock source */
+  hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+
+  /* Configure the Wake-up Timer counter */
+  hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+   /* Enable the Wake-up Timer */
+  __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets wake up timer with interrupt
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  WakeUpCounter: Wake up counter
+  * @param  WakeUpClock: Wake up clock
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
+  assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+  while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+    {
+      /* Enable the write protection for RTC registers */
+      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+      hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hrtc);
+
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Configure the Wake-up Timer counter */
+  hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+  /* Clear the Wake-up Timer clock source bits in CR register */
+  hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+  /* Configure the clock source */
+  hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+
+  /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */
+  __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT();
+
+  EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT;
+
+  /* Configure the Interrupt in the RTC_CR register */
+  __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc,RTC_IT_WUT);
+
+  /* Enable the Wake-up Timer */
+  __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates wake up timer counter.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Disable the Wake-up Timer */
+  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+  /* In case of interrupt mode is used, the interrupt source must disabled */
+  __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc,RTC_IT_WUT);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+  while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+    {
+      /* Enable the write protection for RTC registers */
+      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+      hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hrtc);
+
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Gets wake up timer counter.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval Counter value
+  */
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+  /* Get the counter value */
+  return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT));
+}
+
+/**
+  * @brief  This function handles Wake Up Timer interrupt request.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+  if(__HAL_RTC_WAKEUPTIMER_GET_IT(hrtc, RTC_IT_WUT))
+  {
+    /* Get the status of the Interrupt */
+    if((uint32_t)(hrtc->Instance->CR & RTC_IT_WUT) != (uint32_t)RESET)
+    {
+      /* WAKEUPTIMER callback */
+      HAL_RTCEx_WakeUpTimerEventCallback(hrtc);
+
+      /* Clear the WAKEUPTIMER interrupt pending bit */
+      __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+    }
+  }
+
+  /* Clear the EXTI's line Flag for RTC WakeUpTimer */
+  __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG();
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+  * @brief  Wake Up Timer callback.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_WakeUpTimerEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  This function handles Wake Up Timer Polling.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == RESET)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Clear the WAKEUPTIMER Flag */
+  __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+
+/** @defgroup RTCEx_Exported_Functions_Group3 Extension Peripheral Control functions
+ *  @brief   Extension Peripheral Control functions
+ *
+ at verbatim
+ ===============================================================================
+              ##### Extension Peripheral Control functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Write a data in a specified RTC Backup data register
+      (+) Read a data in a specified RTC Backup data register
+      (+) Set the Coarse calibration parameters.
+      (+) Deactivate the Coarse calibration parameters
+      (+) Set the Smooth calibration parameters.
+      (+) Configure the Synchronization Shift Control Settings.
+      (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+      (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+      (+) Enable the RTC reference clock detection.
+      (+) Disable the RTC reference clock detection.
+      (+) Enable the Bypass Shadow feature.
+      (+) Disable the Bypass Shadow feature.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Writes a data in a specified RTC Backup data register.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  BackupRegister: RTC Backup data Register number.
+  *          This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to
+  *                                 specify the register.
+  * @param  Data: Data to be written in the specified RTC Backup data register.
+  * @retval None
+  */
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data)
+{
+  uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_BKP(BackupRegister));
+
+  tmp = (uint32_t)&(hrtc->Instance->BKP0R);
+  tmp += (BackupRegister * 4);
+
+  /* Write the specified register */
+  *(__IO uint32_t *)tmp = (uint32_t)Data;
+}
+
+/**
+  * @brief  Reads data from the specified RTC Backup data Register.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  BackupRegister: RTC Backup data Register number.
+  *          This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to
+  *                                 specify the register.
+  * @retval Read value
+  */
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister)
+{
+  uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_BKP(BackupRegister));
+
+  tmp = (uint32_t)&(hrtc->Instance->BKP0R);
+  tmp += (BackupRegister * 4);
+
+  /* Read the specified register */
+  return (*(__IO uint32_t *)tmp);
+}
+
+/**
+  * @brief  Sets the Coarse calibration parameters.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  CalibSign: Specifies the sign of the coarse calibration value.
+  *          This parameter can be  one of the following values :
+  *             @arg RTC_CALIBSIGN_POSITIVE: The value sign is positive
+  *             @arg RTC_CALIBSIGN_NEGATIVE: The value sign is negative
+  * @param  Value: value of coarse calibration expressed in ppm (coded on 5 bits).
+  *
+  * @note   This Calibration value should be between 0 and 63 when using negative
+  *         sign with a 2-ppm step.
+  *
+  * @note   This Calibration value should be between 0 and 126 when using positive
+  *         sign with a 4-ppm step.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef* hrtc, uint32_t CalibSign, uint32_t Value)
+{
+  /* Check the parameters */
+  assert_param(IS_RTC_CALIB_SIGN(CalibSign));
+  assert_param(IS_RTC_CALIB_VALUE(Value));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+    /* Set RTC state*/
+    hrtc->State = HAL_RTC_STATE_ERROR;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrtc);
+
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Enable the Coarse Calibration */
+    __HAL_RTC_COARSE_CALIB_ENABLE(hrtc);
+
+    /* Set the coarse calibration value */
+    hrtc->Instance->CALIBR = (uint32_t)(CalibSign|Value);
+
+    /* Exit Initialization mode */
+    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates the Coarse calibration parameters.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef* hrtc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+    /* Set RTC state*/
+    hrtc->State = HAL_RTC_STATE_ERROR;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrtc);
+
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Enable the Coarse Calibration */
+    __HAL_RTC_COARSE_CALIB_DISABLE(hrtc);
+
+    /* Exit Initialization mode */
+    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets the Smooth calibration parameters.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  SmoothCalibPeriod: Select the Smooth Calibration Period.
+  *          This parameter can be can be one of the following values :
+  *             @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s.
+  *             @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s.
+  *             @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s.
+  * @param  SmoothCalibPlusPulses: Select to Set or reset the CALP bit.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses.
+  *             @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added.
+  * @param  SmouthCalibMinusPulsesValue: Select the value of CALM[8:0] bits.
+  *          This parameter can be one any value from 0 to 0x000001FF.
+  * @note   To deactivate the smooth calibration, the field SmoothCalibPlusPulses
+  *         must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field
+  *         SmouthCalibMinusPulsesValue must be equal to 0.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod));
+  assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses));
+  assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmouthCalibMinusPulsesValue));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* check if a calibration is pending*/
+  if((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
+  {
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+    /* check if a calibration is pending*/
+    while((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        /* Change RTC state */
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Configure the Smooth calibration settings */
+  hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmouthCalibMinusPulsesValue);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the Synchronization Shift Control Settings.
+  * @note   When REFCKON is set, firmware must not write to Shift control register.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  ShiftAdd1S: Select to add or not 1 second to the time calendar.
+  *          This parameter can be one of the following values :
+  *             @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar.
+  *             @arg RTC_SHIFTADD1S_RESET: No effect.
+  * @param  ShiftSubFS: Select the number of Second Fractions to substitute.
+  *          This parameter can be one any value from 0 to 0x7FFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef* hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S));
+  assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+    /* Wait until the shift is completed*/
+    while((hrtc->Instance->ISR & RTC_ISR_SHPF) != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrtc);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Check if the reference clock detection is disabled */
+    if((hrtc->Instance->CR & RTC_CR_REFCKON) == RESET)
+    {
+      /* Configure the Shift settings */
+      hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S);
+
+      /* If  RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+      if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+      {
+        if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+        {
+          /* Enable the write protection for RTC registers */
+          __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+          hrtc->State = HAL_RTC_STATE_ERROR;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hrtc);
+
+          return HAL_ERROR;
+        }
+      }
+    }
+    else
+    {
+      /* Enable the write protection for RTC registers */
+      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+      /* Change RTC state */
+      hrtc->State = HAL_RTC_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hrtc);
+
+      return HAL_ERROR;
+    }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  CalibOutput: Select the Calibration output Selection .
+  *          This parameter can be one of the following values:
+  *             @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz.
+  *             @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc, uint32_t CalibOutput)
+{
+  /* Check the parameters */
+  assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput));
+
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Clear flags before config */
+  hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL;
+
+  /* Configure the RTC_CR register */
+  hrtc->Instance->CR |= (uint32_t)CalibOutput;
+
+  __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef* hrtc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the RTC reference clock detection.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef* hrtc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+    /* Set RTC state*/
+    hrtc->State = HAL_RTC_STATE_ERROR;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrtc);
+
+    return HAL_ERROR;
+  }
+  else
+  {
+    __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc);
+
+    /* Exit Initialization mode */
+    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+   /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the RTC reference clock detection.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef* hrtc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+    /* Set RTC state*/
+    hrtc->State = HAL_RTC_STATE_ERROR;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrtc);
+
+    return HAL_ERROR;
+  }
+  else
+  {
+    __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc);
+
+    /* Exit Initialization mode */
+    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
+  }
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the Bypass Shadow feature.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @note   When the Bypass Shadow is enabled the calendar value are taken
+  *         directly from the Calendar counter.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef* hrtc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Set the BYPSHAD bit */
+  hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD;
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables the Bypass Shadow feature.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @note   When the Bypass Shadow is enabled the calendar value are taken
+  *         directly from the Calendar counter.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef* hrtc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Reset the BYPSHAD bit */
+  hrtc->Instance->CR &= (uint8_t)~RTC_CR_BYPSHAD;
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+  /** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions
+ *  @brief    Extended features functions
+ *
+ at verbatim
+ ===============================================================================
+                 ##### Extended features functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) RTC Alarm B callback
+      (+) RTC Poll for Alarm B request
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Alarm B callback.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_AlarmBEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  This function handles AlarmB Polling request.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == RESET)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Clear the Alarm Flag */
+  __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c
new file mode 100644
index 0000000..1b18728
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c
@@ -0,0 +1,1908 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_sai.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   SAI HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Serial Audio Interface (SAI) peripheral:
+  *           + Initialization/de-initialization functions
+  *           + I/O operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+ ==============================================================================
+                  ##### How to use this driver #####
+  ==============================================================================
+
+  [..]
+    The SAI HAL driver can be used as follows:
+
+    (#) Declare a SAI_HandleTypeDef handle structure.
+    (#) Initialize the SAI low level resources by implementing the HAL_SAI_MspInit() API:
+        (##) Enable the SAI interface clock.
+        (##) SAI pins configuration:
+            (+++) Enable the clock for the SAI GPIOs.
+            (+++) Configure these SAI pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_SAI_Transmit_IT()
+             and HAL_SAI_Receive_IT() APIs):
+            (+++) Configure the SAI interrupt priority.
+            (+++) Enable the NVIC SAI IRQ handle.
+
+        (##) DMA Configuration if you need to use DMA process (HAL_SAI_Transmit_DMA()
+             and HAL_SAI_Receive_DMA() APIs):
+            (+++) Declare a DMA handle structure for the Tx/Rx stream.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+            (+++) Configure the DMA Tx/Rx Stream.
+            (+++) Associate the initialized DMA handle to the SAI DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
+                DMA Tx/Rx Stream.
+
+   (#) Program the SAI Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity
+       using HAL_SAI_Init() function.
+
+   - at - The specific SAI interrupts (FIFO request and Overrun underrun interrupt)
+       will be managed using the macros __SAI_ENABLE_IT() and __SAI_DISABLE_IT()
+       inside the transmit and receive process.
+
+  [..]
+   (@) SAI Clock Source configuration is managed differently depending on the selected
+       STM32F4 devices :
+       (+@) For STM32F446xx devices, the configuration is managed through RCCEx_PeriphCLKConfig()
+            function in the HAL RCC drivers
+       (+@) For STM32F439xx/STM32F437xx/STM32F429xx/STM32F427xx devices, the configuration
+            is managed within HAL SAI drivers through HAL_SAI_Init() function using
+            ClockSource field of SAI_InitTypeDef structure.
+  [..]
+   (@) Make sure that either:
+       (+@) I2S PLL is configured or
+       (+@) SAI PLL is configured or
+       (+@) External clock source is configured after setting correctly
+            the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file.
+
+  [..]
+    (@) In master Tx mode: enabling the audio block immediately generates the bit clock
+        for the external slaves even if there is no data in the FIFO, However FS signal
+        generation is conditioned by the presence of data in the FIFO.
+
+  [..]
+    (@) In master Rx mode: enabling the audio block immediately generates the bit clock
+        and FS signal for the external slaves.
+
+  [..]
+    (@) It is mandatory to respect the following conditions in order to avoid bad SAI behavior:
+        (+@)  First bit Offset <= (SLOT size - Data size)
+        (+@)  Data size <= SLOT size
+        (+@)  Number of SLOT x SLOT size = Frame length
+        (+@)  The number of slots should be even when SAI_FS_CHANNEL_IDENTIFICATION is selected.
+
+  [..]
+     Three operation modes are available within this driver :
+
+   *** Polling mode IO operation ***
+   =================================
+   [..]
+     (+) Send an amount of data in blocking mode using HAL_SAI_Transmit()
+     (+) Receive an amount of data in blocking mode using HAL_SAI_Receive()
+
+   *** Interrupt mode IO operation ***
+   ===================================
+   [..]
+     (+) Send an amount of data in non blocking mode using HAL_SAI_Transmit_IT()
+     (+) At transmission end of transfer HAL_SAI_TxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_SAI_TxCpltCallback
+     (+) Receive an amount of data in non blocking mode using HAL_SAI_Receive_IT()
+     (+) At reception end of transfer HAL_SAI_RxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_SAI_RxCpltCallback
+     (+) In case of transfer Error, HAL_SAI_ErrorCallback() function is executed and user can
+         add his own code by customization of function pointer HAL_SAI_ErrorCallback
+
+   *** DMA mode IO operation ***
+   ==============================
+   [..]
+     (+) Send an amount of data in non blocking mode (DMA) using HAL_SAI_Transmit_DMA()
+     (+) At transmission end of transfer HAL_SAI_TxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_SAI_TxCpltCallback
+     (+) Receive an amount of data in non blocking mode (DMA) using HAL_SAI_Receive_DMA()
+     (+) At reception end of transfer HAL_SAI_RxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_SAI_RxCpltCallback
+     (+) In case of transfer Error, HAL_SAI_ErrorCallback() function is executed and user can
+         add his own code by customization of function pointer HAL_SAI_ErrorCallback
+     (+) Pause the DMA Transfer using HAL_SAI_DMAPause()
+     (+) Resume the DMA Transfer using HAL_SAI_DMAResume()
+     (+) Stop the DMA Transfer using HAL_SAI_DMAStop()
+
+   *** SAI HAL driver macros list ***
+   =============================================
+   [..]
+     Below the list of most used macros in USART HAL driver :
+
+      (+) __HAL_SAI_ENABLE: Enable the SAI peripheral
+      (+) __HAL_SAI_DISABLE: Disable the SAI peripheral
+      (+) __HAL_SAI_ENABLE_IT : Enable the specified SAI interrupts
+      (+) __HAL_SAI_DISABLE_IT : Disable the specified SAI interrupts
+      (+) __HAL_SAI_GET_IT_SOURCE: Check if the specified SAI interrupt source is
+          enabled or disabled
+      (+) __HAL_SAI_GET_FLAG: Check whether the specified SAI flag is set or not
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SAI SAI
+  * @brief SAI HAL module driver
+  * @{
+  */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/** @defgroup SAI_Private_Typedefs  SAI Private Typedefs
+  * @{
+  */
+typedef enum {
+  SAI_MODE_DMA,
+  SAI_MODE_IT
+}SAI_ModeTypedef;
+/**
+  * @}
+  */
+/* Private define ------------------------------------------------------------*/
+/** @defgroup SAI_Private_Constants  SAI Private Constants
+  * @{
+  */
+#define SAI_FIFO_SIZE       8
+#define SAI_DEFAULT_TIMEOUT 4
+/**
+  * @}
+  */
+
+/* SAI registers Masks */
+#define CR1_CLEAR_MASK            ((uint32_t)0xFF04C010)
+#define FRCR_CLEAR_MASK           ((uint32_t)0xFFF88000)
+#define SLOTR_CLEAR_MASK          ((uint32_t)0x0000F020)
+
+#define SAI_TIMEOUT_VALUE         10
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void SAI_FillFifo(SAI_HandleTypeDef *hsai);
+static uint32_t SAI_InterruptFlag(SAI_HandleTypeDef *hsai, uint32_t mode);
+static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
+static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
+
+static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai);
+static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai);
+
+static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMAError(DMA_HandleTypeDef *hdma);
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Functions  SAI Exported Functions
+  * @{
+  */
+
+/** @defgroup SAI_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and
+          de-initialize the SAIx peripheral:
+
+      (+) User must implement HAL_SAI_MspInit() function in which he configures
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+      (+) Call the function HAL_SAI_Init() to configure the selected device with
+          the selected configuration:
+        (++) Mode (Master/slave TX/RX)
+        (++) Protocol
+        (++) Data Size
+        (++) MCLK Output
+        (++) Audio frequency
+        (++) FIFO Threshold
+        (++) Frame Config
+        (++) Slot Config
+
+      (+) Call the function HAL_SAI_DeInit() to restore the default configuration
+          of the selected SAI peripheral.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the structure FrameInit, SlotInit and the low part of
+  *         Init according to the specified parameters and call the function
+  *         HAL_SAI_Init to initialize the SAI block.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *               the configuration information for SAI module.
+  * @param  protocol : one of the supported protocol @ref SAI_Protocol
+  * @param  datasize : one of the supported datasize @ref SAI_Protocol_DataSize
+  *                the configuration information for SAI module.
+  * @param  nbslot   : Number of slot.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol));
+  assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize));
+
+  switch(protocol)
+  {
+  case SAI_I2S_STANDARD :
+  case SAI_I2S_MSBJUSTIFIED :
+  case SAI_I2S_LSBJUSTIFIED :
+    status = SAI_InitI2S(hsai, protocol, datasize, nbslot);
+    break;
+  case SAI_PCM_LONG :
+  case SAI_PCM_SHORT :
+    status = SAI_InitPCM(hsai, protocol, datasize, nbslot);
+    break;
+  default :
+    status = HAL_ERROR;
+    break;
+  }
+
+  if(status == HAL_OK)
+  {
+    status = HAL_SAI_Init(hsai);
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Initializes the SAI according to the specified parameters
+  *         in the SAI_InitTypeDef and create the associated handle.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai)
+{
+  uint32_t tmpclock = 0;
+
+  /* This variable used to store the SAI_CK_x (value in Hz) */
+  uint32_t freq = 0;
+
+  /* Check the SAI handle allocation */
+  if(hsai == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the SAI Block parameters */
+  assert_param(IS_SAI_AUDIO_FREQUENCY(hsai->Init.AudioFrequency));
+  assert_param(IS_SAI_BLOCK_PROTOCOL(hsai->Init.Protocol));
+  assert_param(IS_SAI_BLOCK_MODE(hsai->Init.AudioMode));
+  assert_param(IS_SAI_BLOCK_SYNCEXT(hsai->Init.SynchroExt));
+  assert_param(IS_SAI_BLOCK_DATASIZE(hsai->Init.DataSize));
+  assert_param(IS_SAI_BLOCK_FIRST_BIT(hsai->Init.FirstBit));
+  assert_param(IS_SAI_BLOCK_CLOCK_STROBING(hsai->Init.ClockStrobing));
+  assert_param(IS_SAI_BLOCK_SYNCHRO(hsai->Init.Synchro));
+  assert_param(IS_SAI_BLOCK_OUTPUT_DRIVE(hsai->Init.OutputDrive));
+  assert_param(IS_SAI_BLOCK_NODIVIDER(hsai->Init.NoDivider));
+  assert_param(IS_SAI_BLOCK_FIFO_THRESHOLD(hsai->Init.FIFOThreshold));
+  assert_param(IS_SAI_MONO_STEREO_MODE(hsai->Init.MonoStereoMode));
+  assert_param(IS_SAI_BLOCK_COMPANDING_MODE(hsai->Init.CompandingMode));
+  assert_param(IS_SAI_BLOCK_TRISTATE_MANAGEMENT(hsai->Init.TriState));
+
+  /* Check the SAI Block Frame parameters */
+  assert_param(IS_SAI_BLOCK_FRAME_LENGTH(hsai->FrameInit.FrameLength));
+  assert_param(IS_SAI_BLOCK_ACTIVE_FRAME(hsai->FrameInit.ActiveFrameLength));
+  assert_param(IS_SAI_BLOCK_FS_DEFINITION(hsai->FrameInit.FSDefinition));
+  assert_param(IS_SAI_BLOCK_FS_POLARITY(hsai->FrameInit.FSPolarity));
+  assert_param(IS_SAI_BLOCK_FS_OFFSET(hsai->FrameInit.FSOffset));
+
+  /* Check the SAI Block Slot parameters */
+  assert_param(IS_SAI_BLOCK_FIRSTBIT_OFFSET(hsai->SlotInit.FirstBitOffset));
+  assert_param(IS_SAI_BLOCK_SLOT_SIZE(hsai->SlotInit.SlotSize));
+  assert_param(IS_SAI_BLOCK_SLOT_NUMBER(hsai->SlotInit.SlotNumber));
+  assert_param(IS_SAI_SLOT_ACTIVE(hsai->SlotInit.SlotActive));
+
+  if(hsai->State == HAL_SAI_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hsai->Lock = HAL_UNLOCKED;
+
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_SAI_MspInit(hsai);
+  }
+
+  hsai->State = HAL_SAI_STATE_BUSY;
+
+  /* Disable the selected SAI peripheral */
+  SAI_Disable(hsai);
+
+  /* SAI Block Synchro Configuration -----------------------------------------*/
+  SAI_BlockSynchroConfig(hsai);
+
+  /* Configure Master Clock using the following formula :
+     MCLK_x = SAI_CK_x / (MCKDIV[3:0] * 2) with MCLK_x = 256 * FS
+     FS = SAI_CK_x / (MCKDIV[3:0] * 2) * 256
+     MCKDIV[3:0] = SAI_CK_x / FS * 512 */
+  if(hsai->Init.AudioFrequency != SAI_AUDIO_FREQUENCY_MCKDIV)
+  {
+  /* Get SAI clock source based on Source clock selection from RCC */
+  freq = SAI_GetInputClock(hsai);
+
+    /* (saiclocksource x 10) to keep Significant digits */
+    tmpclock = (((freq * 10) / ((hsai->Init.AudioFrequency) * 512)));
+
+    hsai->Init.Mckdiv = tmpclock / 10;
+
+        /* Round result to the nearest integer */
+    if((tmpclock % 10) > 8)
+    {
+      hsai->Init.Mckdiv+= 1;
+    }
+  }
+
+  /* SAI Block Configuration ------------------------------------------------------------*/
+  /* SAI CR1 Configuration */
+  hsai->Instance->CR1&=~(SAI_xCR1_MODE | SAI_xCR1_PRTCFG |  SAI_xCR1_DS |      \
+                         SAI_xCR1_LSBFIRST | SAI_xCR1_CKSTR | SAI_xCR1_SYNCEN |\
+                         SAI_xCR1_MONO | SAI_xCR1_OUTDRIV  | SAI_xCR1_DMAEN |  \
+                         SAI_xCR1_NODIV | SAI_xCR1_MCKDIV);
+
+  hsai->Instance->CR1|= (hsai->Init.AudioMode | hsai->Init.Protocol |           \
+                        hsai->Init.DataSize | hsai->Init.FirstBit  |           \
+                        hsai->Init.ClockStrobing | hsai->Init.Synchro |        \
+                        hsai->Init.MonoStereoMode | hsai->Init.OutputDrive |   \
+                        hsai->Init.NoDivider | (hsai->Init.Mckdiv << 20) | hsai->Init.CompandingMode);
+
+  /* SAI CR2 Configuration */
+  hsai->Instance->CR2&= ~(SAI_xCR2_FTH | SAI_xCR2_FFLUSH | SAI_xCR2_COMP);
+  hsai->Instance->CR2|=  (hsai->Init.FIFOThreshold | hsai->Init.CompandingMode | hsai->Init.TriState);
+
+
+  /* SAI Frame Configuration -----------------------------------------*/
+  hsai->Instance->FRCR&=(~(SAI_xFRCR_FRL | SAI_xFRCR_FSALL | SAI_xFRCR_FSDEF | \
+                           SAI_xFRCR_FSPO | SAI_xFRCR_FSOFF));
+  hsai->Instance->FRCR|=((hsai->FrameInit.FrameLength - 1)  |
+                            hsai->FrameInit.FSOffset |
+                            hsai->FrameInit.FSDefinition |
+                            hsai->FrameInit.FSPolarity   |
+                            ((hsai->FrameInit.ActiveFrameLength - 1) << 8));
+
+  /* SAI Block_x SLOT Configuration ------------------------------------------*/
+  /* This register has no meaning in AC�97 and SPDIF audio protocol */
+  hsai->Instance->SLOTR&= (~(SAI_xSLOTR_FBOFF | SAI_xSLOTR_SLOTSZ |            \
+                             SAI_xSLOTR_NBSLOT | SAI_xSLOTR_SLOTEN ));
+
+  hsai->Instance->SLOTR|=  hsai->SlotInit.FirstBitOffset |  hsai->SlotInit.SlotSize
+                          | hsai->SlotInit.SlotActive | ((hsai->SlotInit.SlotNumber - 1) <<  8);
+
+  /* Initialise the error code */
+  hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+
+  /* Initialize the SAI state */
+  hsai->State= HAL_SAI_STATE_READY;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hsai);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the SAI peripheral.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_DeInit(SAI_HandleTypeDef *hsai)
+{
+  /* Check the SAI handle allocation */
+  if(hsai == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  hsai->State = HAL_SAI_STATE_BUSY;
+
+  /* Disabled All interrupt and clear all the flag */
+  hsai->Instance->IMR = 0;
+  hsai->Instance->CLRFR = 0xFFFFFFFF;
+
+  /* Disable the SAI */
+  SAI_Disable(hsai);
+
+  /* Flush the fifo */
+  SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_SAI_MspDeInit(hsai);
+
+  /* Initialize the error code */
+  hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+
+  /* Initialize the SAI state */
+  hsai->State = HAL_SAI_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hsai);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief SAI MSP Init.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+__weak void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SAI_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief SAI MSP DeInit.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+__weak void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SAI_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Exported_Functions_Group2 IO operation functions
+ *  @brief   Data transfers functions
+ *
+ at verbatim
+  ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the SAI data
+    transfers.
+
+    (+) There are two modes of transfer:
+       (++) Blocking mode : The communication is performed in the polling mode.
+            The status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode : The communication is performed using Interrupts
+            or DMA. These functions return the status of the transfer startup.
+            The end of the data processing will be indicated through the
+            dedicated SAI IRQ when using Interrupt mode or the DMA IRQ when
+            using DMA mode.
+
+    (+) Blocking mode functions are :
+        (++) HAL_SAI_Transmit()
+        (++) HAL_SAI_Receive()
+        (++) HAL_SAI_TransmitReceive()
+
+    (+) Non Blocking mode functions with Interrupt are :
+        (++) HAL_SAI_Transmit_IT()
+        (++) HAL_SAI_Receive_IT()
+        (++) HAL_SAI_TransmitReceive_IT()
+
+    (+) Non Blocking mode functions with DMA are :
+        (++) HAL_SAI_Transmit_DMA()
+        (++) HAL_SAI_Receive_DMA()
+        (++) HAL_SAI_TransmitReceive_DMA()
+
+    (+) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_SAI_TxCpltCallback()
+        (++) HAL_SAI_RxCpltCallback()
+        (++) HAL_SAI_ErrorCallback()
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Transmits an amount of data in blocking mode.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t* pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  if((pData == NULL ) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hsai->State == HAL_SAI_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hsai);
+
+    hsai->State = HAL_SAI_STATE_BUSY_TX;
+    hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+    hsai->XferSize = Size;
+    hsai->XferCount = Size;
+    hsai->pBuffPtr = pData;
+
+    /* Check if the SAI is already enabled */
+    if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN)
+    {
+      /* fill the fifo with data before to enabled the SAI */
+      SAI_FillFifo(hsai);
+      /* Enable SAI peripheral */
+      __HAL_SAI_ENABLE(hsai);
+    }
+
+    while(hsai->XferCount > 0)
+    {
+      /* Write data if the FIFO is not full */
+      if((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL)
+      {
+        if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+        {
+          hsai->Instance->DR = (*hsai->pBuffPtr++);
+        }
+        else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+        {
+          hsai->Instance->DR = *((uint16_t *)hsai->pBuffPtr);
+          hsai->pBuffPtr+= 2;
+        }
+        else
+        {
+          hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
+          hsai->pBuffPtr+= 4;
+        }
+        hsai->XferCount--;
+      }
+      else
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+        /* Check for the Timeout */
+        if(Timeout != HAL_MAX_DELAY)
+        {
+          if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+          {
+            /* Update error code */
+            hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+
+            /* Process Unlocked */
+            __HAL_UNLOCK(hsai);
+
+            /* Change the SAI state */
+            hsai->State = HAL_SAI_STATE_TIMEOUT;
+
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+
+    hsai->State = HAL_SAI_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsai);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in blocking mode.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  if((pData == NULL ) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hsai->State == HAL_SAI_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hsai);
+
+    hsai->State = HAL_SAI_STATE_BUSY_RX;
+    hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+    hsai->pBuffPtr = pData;
+    hsai->XferSize = Size;
+    hsai->XferCount = Size;
+
+    /* Check if the SAI is already enabled */
+    if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN)
+    {
+      /* Enable SAI peripheral */
+      __HAL_SAI_ENABLE(hsai);
+    }
+
+    /* Receive data */
+    while(hsai->XferCount > 0)
+    {
+
+      if((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_EMPTY)
+      {
+        if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+        {
+          (*hsai->pBuffPtr++) = hsai->Instance->DR;
+        }
+        else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+        {
+          *((uint16_t*)hsai->pBuffPtr) = hsai->Instance->DR;
+          hsai->pBuffPtr+= 2;
+        }
+        else
+        {
+          *((uint32_t*)hsai->pBuffPtr) = hsai->Instance->DR;
+          hsai->pBuffPtr+= 4;
+        }
+        hsai->XferCount--;
+      }
+      else
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+        /* Check for the Timeout */
+        if(Timeout != HAL_MAX_DELAY)
+        {
+          if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+          {
+            /* Update error code */
+            hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+
+            /* Process Unlocked */
+            __HAL_UNLOCK(hsai);
+
+            /* Change the SAI state */
+            hsai->State = HAL_SAI_STATE_TIMEOUT;
+
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+
+    hsai->State = HAL_SAI_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsai);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmits an amount of data in no-blocking mode with Interrupt.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+  if(hsai->State == HAL_SAI_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    hsai->pBuffPtr = pData;
+    hsai->XferSize = Size;
+    hsai->XferCount = Size;
+
+    /* Process Locked */
+    __HAL_LOCK(hsai);
+
+    hsai->State = HAL_SAI_STATE_BUSY_TX;
+
+    if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+    {
+      hsai->InterruptServiceRoutine = SAI_Transmit_IT8Bit;
+    }
+    else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+    {
+      hsai->InterruptServiceRoutine = SAI_Transmit_IT16Bit;
+    }
+    else
+    {
+      hsai->InterruptServiceRoutine = SAI_Transmit_IT32Bit;
+    }
+
+    /* Enable FRQ and OVRUDR interrupts */
+    __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+    /* Check if the SAI is already enabled */
+    if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN)
+    {
+      /* Fill the fifo before starting the communication */
+      SAI_FillFifo(hsai);
+
+      /* Enable SAI peripheral */
+      __HAL_SAI_ENABLE(hsai);
+    }
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsai);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in no-blocking mode with Interrupt.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+
+  if(hsai->State == HAL_SAI_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    hsai->pBuffPtr = pData;
+    hsai->XferSize = Size;
+    hsai->XferCount = Size;
+
+    /* Process Locked */
+    __HAL_LOCK(hsai);
+
+    hsai->State = HAL_SAI_STATE_BUSY_RX;
+
+    if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+    {
+      hsai->InterruptServiceRoutine = SAI_Receive_IT8Bit;
+    }
+    else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+    {
+      hsai->InterruptServiceRoutine = SAI_Receive_IT16Bit;
+    }
+    else
+    {
+      hsai->InterruptServiceRoutine = SAI_Receive_IT32Bit;
+    }
+    /* Enable TXE and OVRUDR interrupts */
+    __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+    /* Check if the SAI is already enabled */
+    if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN)
+    {
+      /* Enable SAI peripheral */
+      __HAL_SAI_ENABLE(hsai);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsai);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Pauses the audio stream playing from the Media.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsai);
+
+  /* Pause the audio file playing by disabling the SAI DMA requests */
+  hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsai);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the audio stream playing from the Media.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsai);
+
+  /* Enable the SAI DMA requests */
+  hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
+
+  /* If the SAI peripheral is still not enabled, enable it */
+  if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+  {
+    /* Enable SAI peripheral */
+    __HAL_SAI_ENABLE(hsai);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsai);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Stops the audio stream playing from the Media.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsai);
+
+  /* Disable the SAI DMA request */
+  hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+  /* Abort the SAI DMA Tx Stream */
+  if(hsai->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(hsai->hdmatx);
+  }
+  /* Abort the SAI DMA Rx Stream */
+  if(hsai->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(hsai->hdmarx);
+  }
+
+  /* Disable SAI peripheral */
+  SAI_Disable(hsai);
+
+  hsai->State = HAL_SAI_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsai);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Abort the current transfer and disbaled the SAI.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai)
+{
+  /* Disable the SAI DMA request */
+  hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+  /* Abort the SAI DMA Tx Stream */
+  if(hsai->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(hsai->hdmatx);
+  }
+  /* Abort the SAI DMA Rx Stream */
+  if(hsai->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(hsai->hdmarx);
+  }
+
+  /* Disabled All interrupt and clear all the flag */
+  hsai->Instance->IMR = 0;
+  hsai->Instance->CLRFR = 0xFFFFFFFF;
+
+  /* Disable SAI peripheral */
+  SAI_Disable(hsai);
+
+  /* Flush the fifo */
+  SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+
+  hsai->State = HAL_SAI_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsai);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Transmits an amount of data in no-blocking mode with DMA.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+
+  if((pData == NULL) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hsai->State == HAL_SAI_STATE_READY)
+  {
+    hsai->pBuffPtr = pData;
+    hsai->XferSize = Size;
+    hsai->XferCount = Size;
+
+    /* Process Locked */
+    __HAL_LOCK(hsai);
+
+    hsai->State = HAL_SAI_STATE_BUSY_TX;
+
+    /* Set the SAI Tx DMA Half transfer complete callback */
+    hsai->hdmatx->XferHalfCpltCallback = SAI_DMATxHalfCplt;
+
+    /* Set the SAI TxDMA transfer complete callback */
+    hsai->hdmatx->XferCpltCallback = SAI_DMATxCplt;
+
+    /* Set the DMA error callback */
+    hsai->hdmatx->XferErrorCallback = SAI_DMAError;
+
+    /* Enable the Tx DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hsai->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsai->Instance->DR, hsai->XferSize);
+
+    /* Check if the SAI is already enabled */
+    if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN)
+    {
+      /* Enable SAI peripheral */
+      __HAL_SAI_ENABLE(hsai);
+    }
+
+    /* Enable the interrupts for error handling */
+    __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+
+    /* Enable SAI Tx DMA Request */
+    hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsai);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in no-blocking mode with DMA.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+
+  if((pData == NULL) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hsai->State == HAL_SAI_STATE_READY)
+  {
+    hsai->pBuffPtr = pData;
+    hsai->XferSize = Size;
+    hsai->XferCount = Size;
+
+    /* Process Locked */
+    __HAL_LOCK(hsai);
+
+    hsai->State = HAL_SAI_STATE_BUSY_RX;
+
+    /* Set the SAI Rx DMA Half transfer complete callback */
+    hsai->hdmarx->XferHalfCpltCallback = SAI_DMARxHalfCplt;
+
+    /* Set the SAI Rx DMA transfer complete callback */
+    hsai->hdmarx->XferCpltCallback = SAI_DMARxCplt;
+
+    /* Set the DMA error callback */
+    hsai->hdmarx->XferErrorCallback = SAI_DMAError;
+
+    /* Enable the Rx DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hsai->hdmarx, (uint32_t)&hsai->Instance->DR, *(uint32_t*)tmp, hsai->XferSize);
+
+    /* Check if the SAI is already enabled */
+    if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN)
+    {
+      /* Enable SAI peripheral */
+      __HAL_SAI_ENABLE(hsai);
+    }
+
+    /* Enable the interrupts for error handling */
+    __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+
+    /* Enable SAI Rx DMA Request */
+    hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsai);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Enable the tx mute mode.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  val :  value sent during the mute @ref SAI_Block_Mute_Value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val)
+{
+  assert_param(IS_SAI_BLOCK_MUTE_VALUE(val));
+
+  if(hsai->State != HAL_SAI_STATE_RESET)
+  {
+    CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE);
+    SET_BIT(hsai->Instance->CR2, SAI_xCR2_MUTE | val);
+    return HAL_OK;
+  }
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  Disable the tx mute mode.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai)
+{
+  if(hsai->State != HAL_SAI_STATE_RESET)
+  {
+    CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE);
+    return HAL_OK;
+  }
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  Enable the rx mute detection.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  callback : function called when the mute is detected
+  * @param  counter : number a data before mute detection max 63.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter)
+{
+  assert_param(IS_SAI_BLOCK_MUTE_COUNTER(counter));
+
+  if(hsai->State != HAL_SAI_STATE_RESET)
+  {
+    /* set the mute counter */
+    CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTECNT);
+    SET_BIT(hsai->Instance->CR2, (uint32_t)((uint32_t)counter << 6));
+    hsai->mutecallback = callback;
+    /* enable the IT interrupt */
+    __HAL_SAI_ENABLE_IT(hsai, SAI_IT_MUTEDET);
+    return HAL_OK;
+  }
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  Disable the rx mute detection.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai)
+{
+  if(hsai->State != HAL_SAI_STATE_RESET)
+  {
+    /* set the mutecallback to NULL */
+    hsai->mutecallback = (SAIcallback)NULL;
+    /* enable the IT interrupt */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_IT_MUTEDET);
+    return HAL_OK;
+  }
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  This function handles SAI interrupt request.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai)
+{
+  if(hsai->State != HAL_SAI_STATE_RESET)
+  {
+    uint32_t tmpFlag = hsai->Instance->SR;
+    uint32_t tmpItSource = hsai->Instance->IMR;
+
+    if(((tmpFlag & SAI_xSR_FREQ) == SAI_xSR_FREQ) && ((tmpItSource & SAI_IT_FREQ) == SAI_IT_FREQ))
+    {
+      hsai->InterruptServiceRoutine(hsai);
+    }
+
+    /* check the flag only if one of them is set */
+    if(tmpFlag != 0x00000000)
+    {
+      /* SAI Overrun error interrupt occurred ----------------------------------*/
+      if(((tmpFlag & SAI_FLAG_OVRUDR) == SAI_FLAG_OVRUDR) && ((tmpItSource & SAI_IT_OVRUDR) == SAI_IT_OVRUDR))
+      {
+        /* Clear the SAI Overrun flag */
+        __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+        /* Change the SAI error code */
+        hsai->ErrorCode = ((hsai->State == HAL_SAI_STATE_BUSY_RX) ? HAL_SAI_ERROR_OVR : HAL_SAI_ERROR_UDR);
+        /* the transfer is not stopped, we will forward the information to the user and we let the user decide what needs to be done */
+        HAL_SAI_ErrorCallback(hsai);
+      }
+
+      /* SAI mutedet interrupt occurred ----------------------------------*/
+      if(((tmpFlag & SAI_FLAG_MUTEDET) == SAI_FLAG_MUTEDET) && ((tmpItSource & SAI_IT_MUTEDET) == SAI_IT_MUTEDET))
+      {
+        /* Clear the SAI mutedet flag */
+        __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_MUTEDET);
+        /* call the call back function */
+        if(hsai->mutecallback != (SAIcallback)NULL)
+        {
+          /* inform the user that an RX mute event has been detected */
+          hsai->mutecallback();
+        }
+      }
+
+      /* SAI AFSDET interrupt occurred ----------------------------------*/
+      if(((tmpFlag & SAI_FLAG_AFSDET) == SAI_FLAG_AFSDET) && ((tmpItSource & SAI_IT_AFSDET) == SAI_IT_AFSDET))
+      {
+        /* Change the SAI error code */
+        hsai->ErrorCode = HAL_SAI_ERROR_AFSDET;
+        HAL_SAI_Abort(hsai);
+        HAL_SAI_ErrorCallback(hsai);
+      }
+
+      /* SAI LFSDET interrupt occurred ----------------------------------*/
+      if(((tmpFlag & SAI_FLAG_LFSDET) == SAI_FLAG_LFSDET) && ((tmpItSource & SAI_IT_LFSDET) == SAI_IT_LFSDET))
+      {
+        /* Change the SAI error code */
+        hsai->ErrorCode = HAL_SAI_ERROR_LFSDET;
+        HAL_SAI_Abort(hsai);
+        HAL_SAI_ErrorCallback(hsai);
+      }
+
+      /* SAI WCKCFG interrupt occurred ----------------------------------*/
+      if(((tmpFlag & SAI_FLAG_WCKCFG) == SAI_FLAG_WCKCFG) && ((tmpItSource & SAI_IT_WCKCFG) == SAI_IT_WCKCFG))
+      {
+        /* Change the SAI error code */
+        hsai->ErrorCode = HAL_SAI_ERROR_WCKCFG;
+        HAL_SAI_Abort(hsai);
+        HAL_SAI_ErrorCallback(hsai);
+      }
+    }
+  }
+}
+
+/**
+  * @brief Tx Transfer completed callbacks.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+ __weak void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SAI_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx Transfer Half completed callbacks
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+ __weak void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SAI_TxHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer completed callbacks.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+__weak void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SAI_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer half completed callbacks
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+__weak void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SAI_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief SAI error callbacks.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+__weak void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SAI_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+
+/** @defgroup SAI_Exported_Functions_Group3 Peripheral State functions
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+ ===============================================================================
+                ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the SAI state.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL state
+  */
+HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai)
+{
+  return hsai->State;
+}
+
+/**
+* @brief  Return the SAI error code
+* @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *              the configuration information for the specified SAI Block.
+* @retval SAI Error Code
+*/
+uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai)
+{
+  return hsai->ErrorCode;
+}
+/**
+  * @}
+  */
+
+/**
+  * @brief  Initializes the SAI I2S protocol according to the specified parameters
+  *         in the SAI_InitTypeDef and create the associated handle.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  protocol : one of the supported protocol
+  * @param  datasize : one of the supported datasize @ref SAI_Protocol_DataSize
+  *                the configuration information for SAI module.
+  * @param  nbslot : number of slot minimum value is 2 and max is 16.
+  *                    the value must be a multiple of 2.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
+{
+  /* Check the parameters */
+  assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol));
+  assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize));
+
+  hsai->Init.Protocol            = SAI_FREE_PROTOCOL;
+  hsai->Init.FirstBit            = SAI_FIRSTBIT_MSB;
+  hsai->Init.ClockStrobing       = SAI_CLOCKSTROBING_FALLINGEDGE;
+  hsai->FrameInit.FSDefinition   = SAI_FS_CHANNEL_IDENTIFICATION;
+  hsai->SlotInit.SlotActive      = SAI_SLOTACTIVE_ALL;
+  hsai->SlotInit.FirstBitOffset  = 0;
+  hsai->SlotInit.SlotNumber      = nbslot;
+
+  /* in IS2 the number of slot must be even */
+  if((nbslot & 0x1) != 0 )
+  {
+    return HAL_ERROR;
+  }
+
+  switch(protocol)
+  {
+  case SAI_I2S_STANDARD :
+    hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
+    hsai->FrameInit.FSOffset   = SAI_FS_BEFOREFIRSTBIT;
+    break;
+  case SAI_I2S_MSBJUSTIFIED :
+  case SAI_I2S_LSBJUSTIFIED :
+    hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH;
+    hsai->FrameInit.FSOffset   = SAI_FS_FIRSTBIT;
+    break;
+  default :
+    return HAL_ERROR;
+  }
+
+  /* Frame definition */
+  hsai->Init.DataSize = 0xFFFFFFFF;
+  switch(datasize)
+  {
+  case SAI_PROTOCOL_DATASIZE_16BIT:
+    hsai->Init.DataSize = SAI_DATASIZE_16;
+    hsai->FrameInit.FrameLength = 32*(nbslot/2);
+    hsai->FrameInit.ActiveFrameLength = 16*(nbslot/2);
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B;
+    break;
+  case SAI_PROTOCOL_DATASIZE_16BITEXTENDED :
+    if(hsai->Init.DataSize == 0xFFFFFFFF)
+    {
+      hsai->Init.DataSize = SAI_DATASIZE_16;
+    }
+    break;
+  case SAI_PROTOCOL_DATASIZE_24BIT:
+    if(hsai->Init.DataSize == 0xFFFFFFFF)
+    {
+      hsai->Init.DataSize = SAI_DATASIZE_24;
+    }
+    break;
+  case SAI_PROTOCOL_DATASIZE_32BIT:
+    if(hsai->Init.DataSize == 0xFFFFFFFF)
+    {
+      hsai->Init.DataSize = SAI_DATASIZE_32;
+    }
+    hsai->FrameInit.FrameLength = 64*(nbslot/2);
+    hsai->FrameInit.ActiveFrameLength = 32*(nbslot/2);
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+    if(protocol == SAI_I2S_LSBJUSTIFIED)
+    {
+      if (datasize == SAI_PROTOCOL_DATASIZE_16BITEXTENDED)
+      {
+        hsai->SlotInit.FirstBitOffset = 16;
+      }
+      if (datasize == SAI_PROTOCOL_DATASIZE_24BIT)
+      {
+        hsai->SlotInit.FirstBitOffset = 8;
+      }
+    }
+    break;
+  default :
+    return HAL_ERROR;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the SAI PCM protocol according to the specified parameters
+  *         in the SAI_InitTypeDef and create the associated handle.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  protocol : one of the supported protocol
+  * @param  datasize : one of the supported datasize @ref SAI_Protocol_DataSize
+  * @param  nbslot : number of slot minimum value is 1 and the max is 16.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
+{
+  /* Check the parameters */
+  assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol));
+  assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize));
+
+  hsai->Init.Protocol            = SAI_FREE_PROTOCOL;
+  hsai->Init.FirstBit            = SAI_FIRSTBIT_MSB;
+  hsai->Init.ClockStrobing       = SAI_CLOCKSTROBING_FALLINGEDGE;
+  hsai->FrameInit.FSDefinition   = SAI_FS_STARTFRAME;
+  hsai->FrameInit.FSPolarity     = SAI_FS_ACTIVE_HIGH;
+  hsai->FrameInit.FSOffset       = SAI_FS_BEFOREFIRSTBIT;
+  hsai->SlotInit.FirstBitOffset  = 0;
+  hsai->SlotInit.SlotNumber      = nbslot;
+  hsai->SlotInit.SlotActive      = SAI_SLOTACTIVE_ALL;
+
+  switch(protocol)
+  {
+  case SAI_PCM_SHORT :
+    hsai->FrameInit.ActiveFrameLength = 1;
+    break;
+  case SAI_PCM_LONG :
+    hsai->FrameInit.ActiveFrameLength = 13;
+    break;
+  default :
+    return HAL_ERROR;
+  }
+
+  switch(datasize)
+  {
+  case SAI_PROTOCOL_DATASIZE_16BIT:
+    hsai->Init.DataSize = SAI_DATASIZE_16;
+    hsai->FrameInit.FrameLength = 16 * nbslot;
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B;
+    break;
+  case SAI_PROTOCOL_DATASIZE_16BITEXTENDED :
+    hsai->Init.DataSize = SAI_DATASIZE_16;
+    hsai->FrameInit.FrameLength = 32 * nbslot;
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+    break;
+
+  case SAI_PROTOCOL_DATASIZE_32BIT:
+    hsai->Init.DataSize = SAI_DATASIZE_32;
+    hsai->FrameInit.FrameLength = 32 * nbslot;
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+    break;
+  default :
+    return HAL_ERROR;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Fill the fifo
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_FillFifo(SAI_HandleTypeDef *hsai)
+{
+  /* fill the fifo with data before to enabled the SAI */
+  while((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL)
+  {
+    if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+    {
+      hsai->Instance->DR = (*hsai->pBuffPtr++);
+    }
+    else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+    {
+      hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
+      hsai->pBuffPtr+= 2;
+    }
+    else
+    {
+      hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
+      hsai->pBuffPtr+= 4;
+    }
+    hsai->XferCount--;
+  }
+}
+
+/**
+  * @brief  return the interrupt flag to set according the SAI setup
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  mode : SAI_MODE_DMA or SAI_MODE_IT
+  * @retval the list of the IT flag to enable
+ */
+static uint32_t SAI_InterruptFlag(SAI_HandleTypeDef *hsai, uint32_t mode)
+{
+  uint32_t tmpIT = SAI_IT_OVRUDR;
+
+  if(mode == SAI_MODE_IT)
+  {
+    tmpIT|= SAI_IT_FREQ;
+  }
+
+  if((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX))
+  {
+    tmpIT|= SAI_IT_AFSDET | SAI_IT_LFSDET;
+  }
+  else
+  {
+    /* hsai has been configured in master mode */
+    tmpIT|= SAI_IT_WCKCFG;
+  }
+  return tmpIT;
+}
+
+/**
+  * @brief  disabled the SAI and wait the disabling
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai)
+{
+  uint32_t tickstart = HAL_GetTick();
+  HAL_StatusTypeDef status = HAL_OK;
+
+  __HAL_SAI_DISABLE(hsai);
+  while((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != RESET)
+  {
+    /* Check for the Timeout */
+    if((HAL_GetTick() - tickstart ) > SAI_TIMEOUT_VALUE)
+    {
+      /* Update error code */
+      hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+
+      status = HAL_TIMEOUT;
+
+      /* Change the SAI state */
+      HAL_SAI_ErrorCallback(hsai);
+    }
+  }
+  return status;
+}
+
+/**
+  * @brief  Tx Handler for Transmit in Interrupt mode 8Bit transfer
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai)
+{
+  /* Write data on DR register */
+  hsai->Instance->DR = (*hsai->pBuffPtr++);
+  hsai->XferCount--;
+
+  /* Handle the end of the transmission */
+  if(hsai->XferCount == 0)
+  {
+    /* Disable FREQ and OVRUDR interrupts */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+    hsai->State = HAL_SAI_STATE_READY;
+    HAL_SAI_TxCpltCallback(hsai);
+  }
+}
+
+/**
+  * @brief  Tx Handler for Transmit in Interrupt mode for 16Bit transfer
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai)
+{
+  /* Write data on DR register */
+  hsai->Instance->DR = *(uint16_t *)hsai->pBuffPtr;
+  hsai->pBuffPtr+=2;
+  hsai->XferCount--;
+
+  /* Handle the end of the transmission */
+  if(hsai->XferCount == 0)
+  {
+    /* Disable FREQ and OVRUDR interrupts */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+    hsai->State = HAL_SAI_STATE_READY;
+    HAL_SAI_TxCpltCallback(hsai);
+  }
+}
+
+/**
+  * @brief  Tx Handler for Transmit in Interrupt mode for 32Bit transfer
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai)
+{
+  /* Write data on DR register */
+  hsai->Instance->DR = *(uint32_t *)hsai->pBuffPtr;
+  hsai->pBuffPtr+=4;
+  hsai->XferCount--;
+
+  /* Handle the end of the transmission */
+  if(hsai->XferCount == 0)
+  {
+    /* Disable FREQ and OVRUDR interrupts */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+    hsai->State = HAL_SAI_STATE_READY;
+    HAL_SAI_TxCpltCallback(hsai);
+  }
+}
+
+/**
+  * @brief  Rx Handler for Receive in Interrupt mode 8Bit transfer
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai)
+{
+  /* Receive data */
+  (*hsai->pBuffPtr++) = hsai->Instance->DR;
+  hsai->XferCount--;
+
+  /* Check end of the transfer */
+  if(hsai->XferCount == 0)
+  {
+    /* Disable TXE and OVRUDR interrupts */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+    /* Clear the SAI Overrun flag */
+    __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+
+    hsai->State = HAL_SAI_STATE_READY;
+    HAL_SAI_RxCpltCallback(hsai);
+  }
+}
+
+/**
+  * @brief  Rx Handler for Receive in Interrupt mode for 16Bit transfer
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai)
+{
+  /* Receive data */
+  *(uint16_t*)hsai->pBuffPtr = hsai->Instance->DR;
+  hsai->pBuffPtr+=2;
+  hsai->XferCount--;
+
+  /* Check end of the transfer */
+  if(hsai->XferCount == 0)
+  {
+    /* Disable TXE and OVRUDR interrupts */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+    /* Clear the SAI Overrun flag */
+    __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+
+    hsai->State = HAL_SAI_STATE_READY;
+    HAL_SAI_RxCpltCallback(hsai);
+  }
+}
+/**
+  * @brief  Rx Handler for Receive in Interrupt mode for 32Bit transfer
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai)
+{
+  /* Receive data */
+  *(uint32_t*)hsai->pBuffPtr = hsai->Instance->DR;
+  hsai->pBuffPtr+=4;
+  hsai->XferCount--;
+
+  /* Check end of the transfer */
+  if(hsai->XferCount == 0)
+  {
+    /* Disable TXE and OVRUDR interrupts */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+
+    /* Clear the SAI Overrun flag */
+    __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+
+    hsai->State = HAL_SAI_STATE_READY;
+    HAL_SAI_RxCpltCallback(hsai);
+  }
+}
+
+/**
+  * @brief DMA SAI transmit process complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma)
+{
+  uint32_t tickstart = 0;
+
+  SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef* )hdma)->Parent;
+
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    hsai->XferCount = 0;
+
+    /* Disable SAI Tx DMA Request */
+    hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Set timeout: 10 is the max delay to send the remaining data in the SAI FIFO */
+    /* Wait until FIFO is empty */
+    while(__HAL_SAI_GET_FLAG(hsai, SAI_xSR_FLVL) != RESET)
+    {
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > SAI_TIMEOUT_VALUE)
+      {
+        /* Update error code */
+        hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+
+        /* Change the SAI state */
+        HAL_SAI_ErrorCallback(hsai);
+      }
+    }
+
+    /* Stop the interrupts error handling */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+
+    hsai->State= HAL_SAI_STATE_READY;
+  }
+  HAL_SAI_TxCpltCallback(hsai);
+}
+
+/**
+  * @brief DMA SAI transmit process half complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_SAI_TxHalfCpltCallback(hsai);
+}
+
+/**
+  * @brief DMA SAI receive process complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+  SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    /* Disable Rx DMA Request */
+    hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
+    hsai->XferCount = 0;
+
+    /* Stop the interrupts error handling */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+
+    hsai->State = HAL_SAI_STATE_READY;
+  }
+  HAL_SAI_RxCpltCallback(hsai);
+}
+
+/**
+  * @brief DMA SAI receive process half complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_SAI_RxHalfCpltCallback(hsai);
+}
+/**
+  * @brief DMA SAI communication error callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SAI_DMAError(DMA_HandleTypeDef *hdma)
+{
+  SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Stop the DMA transfer */
+  HAL_SAI_DMAStop(hsai);
+
+  /* Set the SAI state ready to be able to start again the process */
+  hsai->State= HAL_SAI_STATE_READY;
+  HAL_SAI_ErrorCallback(hsai);
+
+  hsai->XferCount = 0;
+}
+
+/**
+  * @}
+  */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+#endif /* HAL_SAI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c
new file mode 100644
index 0000000..cad89d5
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c
@@ -0,0 +1,269 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_sai_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   SAI Extension HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of SAI extension peripheral:
+  *           + Extension features functions
+  *
+  @verbatim
+  ==============================================================================
+               ##### SAI peripheral extension features  #####
+  ==============================================================================
+
+  [..] Comparing to other previous devices, the SAI interface for STM32F446xx
+       devices contains the following additional features :
+
+       (+) Possibility to be clocked from PLLR
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..] This driver provides functions to manage several sources to clock SAI
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SAIEx SAIEx
+  * @brief SAI Extension HAL module driver
+  * @{
+  */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* SAI registers Masks */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup SAI_Private_Functions  SAI Private Functions
+  * @{
+  */
+ /**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SAIEx_Exported_Functions SAI Extended Exported Functions
+  * @{
+  */
+
+/** @defgroup SAIEx_Exported_Functions_Group1 Extension features functions
+  *  @brief   Extension features functions
+  *
+ at verbatim
+ ===============================================================================
+                       ##### Extension features Functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the possible
+    SAI clock sources.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configure SAI Block synchronization mode
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *               the configuration information for SAI module.
+  * @retval SAI Clock Input
+  */
+void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai)
+{
+  uint32_t tmpregisterGCR = 0;
+
+#if defined(STM32F446xx)
+  /* This setting must be done with both audio block (A & B) disabled     */
+  switch(hsai->Init.SynchroExt)
+  {
+  case SAI_SYNCEXT_DISABLE :
+    tmpregisterGCR = 0;
+    break;
+  case SAI_SYNCEXT_IN_ENABLE :
+    tmpregisterGCR = SAI_GCR_SYNCIN_0;
+    break;
+  case SAI_SYNCEXT_OUTBLOCKA_ENABLE :
+    tmpregisterGCR = SAI_GCR_SYNCOUT_0;
+    break;
+  case SAI_SYNCEXT_OUTBLOCKB_ENABLE :
+    tmpregisterGCR = SAI_GCR_SYNCOUT_1;
+    break;
+  }
+
+  if((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B))
+  {
+    SAI1->GCR = tmpregisterGCR;
+  }
+  else
+  {
+    SAI2->GCR = tmpregisterGCR;
+  }
+#endif /* STM32F446xx */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* This setting must be done with both audio block (A & B) disabled                   */
+  switch(hsai->Init.SynchroExt)
+  {
+  case SAI_SYNCEXT_DISABLE :
+    tmpregisterGCR = 0;
+    break;
+  case SAI_SYNCEXT_OUTBLOCKA_ENABLE :
+    tmpregisterGCR = SAI_GCR_SYNCOUT_0;
+    break;
+  case SAI_SYNCEXT_OUTBLOCKB_ENABLE :
+    tmpregisterGCR = SAI_GCR_SYNCOUT_1;
+    break;
+  }
+  SAI1->GCR = tmpregisterGCR;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+}
+  /**
+  * @brief  Get SAI Input Clock based on SAI source clock selection
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *               the configuration information for SAI module.
+  * @retval SAI Clock Input
+  */
+uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai)
+{
+  /* This variable used to store the SAI_CK_x (value in Hz) */
+  uint32_t saiclocksource = 0;
+
+#if defined(STM32F446xx)
+  if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B))
+  {
+    saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI1);
+  }
+  else /* SAI2_Block_A || SAI2_Block_B*/
+  {
+    saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI2);
+  }
+#endif /* STM32F446xx */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  uint32_t vcoinput = 0, tmpreg = 0;
+
+  /* Check the SAI Block parameters */
+  assert_param(IS_SAI_CLK_SOURCE(hsai->Init.ClockSource));
+
+  /* SAI Block clock source selection */
+  if(hsai->Instance == SAI1_Block_A)
+  {
+     __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(hsai->Init.ClockSource);
+  }
+  else
+  {
+     __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG((uint32_t)(hsai->Init.ClockSource << 2));
+  }
+
+  /* VCO Input Clock value calculation */
+  if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+  {
+    /* In Case the PLL Source is HSI (Internal Clock) */
+    vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+  }
+  else
+  {
+    /* In Case the PLL Source is HSE (External Clock) */
+    vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+  }
+
+  /* SAI_CLK_x : SAI Block Clock configuration for different clock sources selected */
+  if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLSAI)
+  {
+    /* Configure the PLLI2S division factor */
+    /* PLLSAI_VCO Input  = PLL_SOURCE/PLLM */
+    /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+    /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+    tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24;
+    saiclocksource = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg);
+
+    /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+    tmpreg = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8) + 1);
+    saiclocksource = saiclocksource/(tmpreg);
+
+  }
+  else if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLI2S)
+  {
+    /* Configure the PLLI2S division factor */
+    /* PLLI2S_VCO Input  = PLL_SOURCE/PLLM */
+    /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+    /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+    tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24;
+    saiclocksource = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg);
+
+    /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+    tmpreg = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1);
+    saiclocksource = saiclocksource/(tmpreg);
+  }
+  else /* sConfig->ClockSource == SAI_CLKSource_Ext */
+  {
+    /* Enable the External Clock selection */
+    __HAL_RCC_I2S_CONFIG(RCC_I2SCLKSOURCE_EXT);
+
+    saiclocksource = EXTERNAL_CLOCK_VALUE;
+  }
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+       /* the return result is the value of SAI clock */
+  return saiclocksource;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx  || STM32F446xx */
+#endif /* HAL_SAI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c
new file mode 100644
index 0000000..d579fe8
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c
@@ -0,0 +1,3488 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_sd.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   SD card HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Secure Digital (SD) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    This driver implements a high level communication layer for read and write from/to
+    this memory. The needed STM32 hardware resources (SDIO and GPIO) are performed by
+    the user in HAL_SD_MspInit() function (MSP layer).
+    Basically, the MSP layer configuration should be the same as we provide in the
+    examples.
+    You can easily tailor this configuration according to hardware resources.
+
+  [..]
+    This driver is a generic layered driver for SDIO memories which uses the HAL
+    SDIO driver functions to interface with SD and uSD cards devices.
+    It is used as follows:
+
+    (#)Initialize the SDIO low level resources by implement the HAL_SD_MspInit() API:
+        (##) Enable the SDIO interface clock using __HAL_RCC_SDIO_CLK_ENABLE();
+        (##) SDIO pins configuration for SD card
+            (+++) Enable the clock for the SDIO GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE();
+            (+++) Configure these SDIO pins as alternate function pull-up using HAL_GPIO_Init()
+                  and according to your pin assignment;
+        (##) DMA Configuration if you need to use DMA process (HAL_SD_ReadBlocks_DMA()
+             and HAL_SD_WriteBlocks_DMA() APIs).
+            (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE();
+            (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled.
+        (##) NVIC configuration if you need to use interrupt process when using DMA transfer.
+            (+++) Configure the SDIO and DMA interrupt priorities using functions
+                  HAL_NVIC_SetPriority(); DMA priority is superior to SDIO's priority
+            (+++) Enable the NVIC DMA and SDIO IRQs using function HAL_NVIC_EnableIRQ()
+            (+++) SDIO interrupts are managed using the macros __HAL_SD_SDIO_ENABLE_IT()
+                  and __HAL_SD_SDIO_DISABLE_IT() inside the communication process.
+            (+++) SDIO interrupts pending bits are managed using the macros __HAL_SD_SDIO_GET_IT()
+                  and __HAL_SD_SDIO_CLEAR_IT()
+    (#) At this stage, you can perform SD read/write/erase operations after SD card initialization
+
+
+  *** SD Card Initialization and configuration ***
+  ================================================
+  [..]
+    To initialize the SD Card, use the HAL_SD_Init() function.  It Initializes
+    the SD Card and put it into Standby State (Ready for data transfer).
+    This function provide the following operations:
+
+    (#) Apply the SD Card initialization process at 400KHz and check the SD Card
+        type (Standard Capacity or High Capacity). You can change or adapt this
+        frequency by adjusting the "ClockDiv" field.
+        The SD Card frequency (SDIO_CK) is computed as follows:
+
+           SDIO_CK = SDIOCLK / (ClockDiv + 2)
+
+        In initialization mode and according to the SD Card standard,
+        make sure that the SDIO_CK frequency doesn't exceed 400KHz.
+
+    (#) Get the SD CID and CSD data. All these information are managed by the SDCardInfo
+        structure. This structure provide also ready computed SD Card capacity
+        and Block size.
+
+        - at - These information are stored in SD handle structure in case of future use.
+
+    (#) Configure the SD Card Data transfer frequency. By Default, the card transfer
+        frequency is set to 24MHz. You can change or adapt this frequency by adjusting
+        the "ClockDiv" field.
+        In transfer mode and according to the SD Card standard, make sure that the
+        SDIO_CK frequency doesn't exceed 25MHz and 50MHz in High-speed mode switch.
+        To be able to use a frequency higher than 24MHz, you should use the SDIO
+        peripheral in bypass mode. Refer to the corresponding reference manual
+        for more details.
+
+    (#) Select the corresponding SD Card according to the address read with the step 2.
+
+    (#) Configure the SD Card in wide bus mode: 4-bits data.
+
+  *** SD Card Read operation ***
+  ==============================
+  [..]
+    (+) You can read from SD card in polling mode by using function HAL_SD_ReadBlocks().
+        This function support only 512-bytes block length (the block size should be
+        chosen as 512 bytes).
+        You can choose either one block read operation or multiple block read operation
+        by adjusting the "NumberOfBlocks" parameter.
+
+    (+) You can read from SD card in DMA mode by using function HAL_SD_ReadBlocks_DMA().
+        This function support only 512-bytes block length (the block size should be
+        chosen as 512 bytes).
+        You can choose either one block read operation or multiple block read operation
+        by adjusting the "NumberOfBlocks" parameter.
+        After this, you have to call the function HAL_SD_CheckReadOperation(), to insure
+        that the read transfer is done correctly in both DMA and SD sides.
+
+  *** SD Card Write operation ***
+  ===============================
+  [..]
+    (+) You can write to SD card in polling mode by using function HAL_SD_WriteBlocks().
+        This function support only 512-bytes block length (the block size should be
+        chosen as 512 bytes).
+        You can choose either one block read operation or multiple block read operation
+        by adjusting the "NumberOfBlocks" parameter.
+
+    (+) You can write to SD card in DMA mode by using function HAL_SD_WriteBlocks_DMA().
+        This function support only 512-bytes block length (the block size should be
+        chosen as 512 byte).
+        You can choose either one block read operation or multiple block read operation
+        by adjusting the "NumberOfBlocks" parameter.
+        After this, you have to call the function HAL_SD_CheckWriteOperation(), to insure
+        that the write transfer is done correctly in both DMA and SD sides.
+
+  *** SD card status ***
+  ======================
+  [..]
+    (+) At any time, you can check the SD Card status and get the SD card state
+        by using the HAL_SD_GetStatus() function. This function checks first if the
+        SD card is still connected and then get the internal SD Card transfer state.
+    (+) You can also get the SD card SD Status register by using the HAL_SD_SendSDStatus()
+        function.
+
+  *** SD HAL driver macros list ***
+  ==================================
+  [..]
+    Below the list of most used macros in SD HAL driver.
+
+    (+) __HAL_SD_SDIO_ENABLE : Enable the SD device
+    (+) __HAL_SD_SDIO_DISABLE : Disable the SD device
+    (+) __HAL_SD_SDIO_DMA_ENABLE: Enable the SDIO DMA transfer
+    (+) __HAL_SD_SDIO_DMA_DISABLE: Disable the SDIO DMA transfer
+    (+) __HAL_SD_SDIO_ENABLE_IT: Enable the SD device interrupt
+    (+) __HAL_SD_SDIO_DISABLE_IT: Disable the SD device interrupt
+    (+) __HAL_SD_SDIO_GET_FLAG:Check whether the specified SD flag is set or not
+    (+) __HAL_SD_SDIO_CLEAR_FLAG: Clear the SD's pending flags
+
+    (@) You can refer to the SD HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+#ifdef HAL_SD_MODULE_ENABLED
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SD
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup SD_Private_Defines
+  * @{
+  */
+/**
+  * @brief  SDIO Data block size
+  */
+#define DATA_BLOCK_SIZE                  ((uint32_t)(9 << 4))
+/**
+  * @brief  SDIO Static flags, Timeout, FIFO Address
+  */
+#define SDIO_STATIC_FLAGS               ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_CTIMEOUT |\
+                                                    SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR | SDIO_FLAG_RXOVERR  |\
+                                                    SDIO_FLAG_CMDREND  | SDIO_FLAG_CMDSENT  | SDIO_FLAG_DATAEND  |\
+                                                    SDIO_FLAG_DBCKEND))
+
+#define SDIO_CMD0TIMEOUT                ((uint32_t)0x00010000)
+
+/**
+  * @brief  Mask for errors Card Status R1 (OCR Register)
+  */
+#define SD_OCR_ADDR_OUT_OF_RANGE        ((uint32_t)0x80000000)
+#define SD_OCR_ADDR_MISALIGNED          ((uint32_t)0x40000000)
+#define SD_OCR_BLOCK_LEN_ERR            ((uint32_t)0x20000000)
+#define SD_OCR_ERASE_SEQ_ERR            ((uint32_t)0x10000000)
+#define SD_OCR_BAD_ERASE_PARAM          ((uint32_t)0x08000000)
+#define SD_OCR_WRITE_PROT_VIOLATION     ((uint32_t)0x04000000)
+#define SD_OCR_LOCK_UNLOCK_FAILED       ((uint32_t)0x01000000)
+#define SD_OCR_COM_CRC_FAILED           ((uint32_t)0x00800000)
+#define SD_OCR_ILLEGAL_CMD              ((uint32_t)0x00400000)
+#define SD_OCR_CARD_ECC_FAILED          ((uint32_t)0x00200000)
+#define SD_OCR_CC_ERROR                 ((uint32_t)0x00100000)
+#define SD_OCR_GENERAL_UNKNOWN_ERROR    ((uint32_t)0x00080000)
+#define SD_OCR_STREAM_READ_UNDERRUN     ((uint32_t)0x00040000)
+#define SD_OCR_STREAM_WRITE_OVERRUN     ((uint32_t)0x00020000)
+#define SD_OCR_CID_CSD_OVERWRITE       ((uint32_t)0x00010000)
+#define SD_OCR_WP_ERASE_SKIP            ((uint32_t)0x00008000)
+#define SD_OCR_CARD_ECC_DISABLED        ((uint32_t)0x00004000)
+#define SD_OCR_ERASE_RESET              ((uint32_t)0x00002000)
+#define SD_OCR_AKE_SEQ_ERROR            ((uint32_t)0x00000008)
+#define SD_OCR_ERRORBITS                ((uint32_t)0xFDFFE008)
+
+/**
+  * @brief  Masks for R6 Response
+  */
+#define SD_R6_GENERAL_UNKNOWN_ERROR     ((uint32_t)0x00002000)
+#define SD_R6_ILLEGAL_CMD               ((uint32_t)0x00004000)
+#define SD_R6_COM_CRC_FAILED            ((uint32_t)0x00008000)
+
+#define SD_VOLTAGE_WINDOW_SD            ((uint32_t)0x80100000)
+#define SD_HIGH_CAPACITY                ((uint32_t)0x40000000)
+#define SD_STD_CAPACITY                 ((uint32_t)0x00000000)
+#define SD_CHECK_PATTERN                ((uint32_t)0x000001AA)
+
+#define SD_MAX_VOLT_TRIAL               ((uint32_t)0x0000FFFF)
+#define SD_ALLZERO                      ((uint32_t)0x00000000)
+
+#define SD_WIDE_BUS_SUPPORT             ((uint32_t)0x00040000)
+#define SD_SINGLE_BUS_SUPPORT           ((uint32_t)0x00010000)
+#define SD_CARD_LOCKED                  ((uint32_t)0x02000000)
+
+#define SD_DATATIMEOUT                  ((uint32_t)0xFFFFFFFF)
+#define SD_0TO7BITS                     ((uint32_t)0x000000FF)
+#define SD_8TO15BITS                    ((uint32_t)0x0000FF00)
+#define SD_16TO23BITS                   ((uint32_t)0x00FF0000)
+#define SD_24TO31BITS                   ((uint32_t)0xFF000000)
+#define SD_MAX_DATA_LENGTH              ((uint32_t)0x01FFFFFF)
+
+#define SD_HALFFIFO                     ((uint32_t)0x00000008)
+#define SD_HALFFIFOBYTES                ((uint32_t)0x00000020)
+
+/**
+  * @brief  Command Class Supported
+  */
+#define SD_CCCC_LOCK_UNLOCK             ((uint32_t)0x00000080)
+#define SD_CCCC_WRITE_PROT              ((uint32_t)0x00000040)
+#define SD_CCCC_ERASE                   ((uint32_t)0x00000020)
+
+/**
+  * @brief  Following commands are SD Card Specific commands.
+  *         SDIO_APP_CMD should be sent before sending these commands.
+  */
+#define SD_SDIO_SEND_IF_COND            ((uint32_t)SD_CMD_HS_SEND_EXT_CSD)
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SD_Private_Functions_Prototypes
+  * @{
+  */
+static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr);
+static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus);
+static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus);
+static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD);
+static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA);
+static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR);
+static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma);
+static void SD_DMA_RxError(DMA_HandleTypeDef *hdma);
+static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma);
+static void SD_DMA_TxError(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SD_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup SD_Exported_Functions_Group1
+ *  @brief   Initialization and de-initialization functions
+ *
+ at verbatim
+  ==============================================================================
+          ##### Initialization and de-initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to initialize/de-initialize the SD
+    card device to be ready for use.
+
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the SD card according to the specified parameters in the
+            SD_HandleTypeDef and create the associated handle.
+  * @param  hsd: SD handle
+  * @param  SDCardInfo: HAL_SD_CardInfoTypedef structure for SD card information
+  * @retval HAL SD error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo)
+{
+  __IO HAL_SD_ErrorTypedef errorstate = SD_OK;
+  SD_InitTypeDef tmpinit;
+
+  /* Allocate lock resource and initialize it */
+  hsd->Lock = HAL_UNLOCKED;
+  /* Initialize the low level hardware (MSP) */
+  HAL_SD_MspInit(hsd);
+
+  /* Default SDIO peripheral configuration for SD card initialization */
+  tmpinit.ClockEdge           = SDIO_CLOCK_EDGE_RISING;
+  tmpinit.ClockBypass         = SDIO_CLOCK_BYPASS_DISABLE;
+  tmpinit.ClockPowerSave      = SDIO_CLOCK_POWER_SAVE_DISABLE;
+  tmpinit.BusWide             = SDIO_BUS_WIDE_1B;
+  tmpinit.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
+  tmpinit.ClockDiv            = SDIO_INIT_CLK_DIV;
+
+  /* Initialize SDIO peripheral interface with default configuration */
+  SDIO_Init(hsd->Instance, tmpinit);
+
+  /* Identify card operating voltage */
+  errorstate = SD_PowerON(hsd);
+
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Initialize the present SDIO card(s) and put them in idle state */
+  errorstate = SD_Initialize_Cards(hsd);
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Read CSD/CID MSD registers */
+  errorstate = HAL_SD_Get_CardInfo(hsd, SDCardInfo);
+
+  if (errorstate == SD_OK)
+  {
+    /* Select the Card */
+    errorstate = SD_Select_Deselect(hsd, (uint32_t)(((uint32_t)SDCardInfo->RCA) << 16));
+  }
+
+  /* Configure SDIO peripheral interface */
+  SDIO_Init(hsd->Instance, hsd->Init);
+
+  return errorstate;
+}
+
+/**
+  * @brief  De-Initializes the SD card.
+  * @param  hsd: SD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd)
+{
+
+  /* Set SD power state to off */
+  SD_PowerOFF(hsd);
+
+  /* De-Initialize the MSP layer */
+  HAL_SD_MspDeInit(hsd);
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initializes the SD MSP.
+  * @param  hsd: SD handle
+  * @retval None
+  */
+__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  De-Initialize SD MSP.
+  * @param  hsd: SD handle
+  * @retval None
+  */
+__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup SD_Exported_Functions_Group2
+ *  @brief   Data transfer functions
+ *
+ at verbatim
+  ==============================================================================
+                        ##### IO operation functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to manage the data
+    transfer from/to SD card.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Reads block(s) from a specified address in a card. The Data transfer
+  *         is managed by polling mode.
+  * @param  hsd: SD handle
+  * @param  pReadBuffer: pointer to the buffer that will contain the received data
+  * @param  ReadAddr: Address from where data is to be read
+  * @param  BlockSize: SD card Data block size
+  * @note   BlockSize must be 512 bytes.
+  * @param  NumberOfBlocks: Number of SD blocks to read
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+  SDIO_CmdInitTypeDef  sdio_cmdinitstructure;
+  SDIO_DataInitTypeDef sdio_datainitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t count = 0, *tempbuff = (uint32_t *)pReadBuffer;
+
+  /* Initialize data control register */
+  hsd->Instance->DCTRL = 0;
+
+  if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+  {
+    BlockSize = 512;
+    ReadAddr /= 512;
+  }
+
+  /* Set Block Size for Card */
+  sdio_cmdinitstructure.Argument         = (uint32_t) BlockSize;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+  sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+  sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+  sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Configure the SD DPSM (Data Path State Machine) */
+  sdio_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+  sdio_datainitstructure.DataLength    = NumberOfBlocks * BlockSize;
+  sdio_datainitstructure.DataBlockSize = DATA_BLOCK_SIZE;
+  sdio_datainitstructure.TransferDir   = SDIO_TRANSFER_DIR_TO_SDIO;
+  sdio_datainitstructure.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
+  sdio_datainitstructure.DPSM          = SDIO_DPSM_ENABLE;
+  SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+  if(NumberOfBlocks > 1)
+  {
+    /* Send CMD18 READ_MULT_BLOCK with argument data address */
+    sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK;
+  }
+  else
+  {
+    /* Send CMD17 READ_SINGLE_BLOCK */
+    sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK;
+  }
+
+  sdio_cmdinitstructure.Argument         = (uint32_t)ReadAddr;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Read block(s) in polling mode */
+  if(NumberOfBlocks > 1)
+  {
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK);
+
+    if (errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+
+    /* Poll on SDIO flags */
+#ifdef SDIO_STA_STBITERR
+    while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+    while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND))
+#endif /* SDIO_STA_STBITERR */
+    {
+      if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+      {
+        /* Read data from SDIO Rx FIFO */
+        for (count = 0; count < 8; count++)
+        {
+          *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
+        }
+
+        tempbuff += 8;
+      }
+    }
+  }
+  else
+  {
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK);
+
+    if (errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+
+    /* In case of single block transfer, no need of stop transfer at all */
+#ifdef SDIO_STA_STBITERR
+    while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+    while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+    {
+      if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+      {
+        /* Read data from SDIO Rx FIFO */
+        for (count = 0; count < 8; count++)
+        {
+          *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
+        }
+
+        tempbuff += 8;
+      }
+    }
+  }
+
+  /* Send stop transmission command in case of multiblock read */
+  if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1))
+  {
+    if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) ||\
+      (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+        (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+    {
+      /* Send stop transmission command */
+      errorstate = HAL_SD_StopTransfer(hsd);
+    }
+  }
+
+  /* Get error state */
+  if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+    errorstate = SD_DATA_TIMEOUT;
+
+    return errorstate;
+  }
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+    errorstate = SD_DATA_CRC_FAIL;
+
+    return errorstate;
+  }
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+    errorstate = SD_RX_OVERRUN;
+
+    return errorstate;
+  }
+#ifdef SDIO_STA_STBITERR
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+    errorstate = SD_START_BIT_ERR;
+
+    return errorstate;
+  }
+#endif /* SDIO_STA_STBITERR */
+  else
+  {
+    /* No error flag set */
+  }
+
+  count = SD_DATATIMEOUT;
+
+  /* Empty FIFO if there is still any data */
+  while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0))
+  {
+    *tempbuff = SDIO_ReadFIFO(hsd->Instance);
+    tempbuff++;
+    count--;
+  }
+
+  /* Clear all the static flags */
+  __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+  return errorstate;
+}
+
+/**
+  * @brief  Allows to write block(s) to a specified address in a card. The Data
+  *         transfer is managed by polling mode.
+  * @param  hsd: SD handle
+  * @param  pWriteBuffer: pointer to the buffer that will contain the data to transmit
+  * @param  WriteAddr: Address from where data is to be written
+  * @param  BlockSize: SD card Data block size
+  * @note   BlockSize must be 512 bytes.
+  * @param  NumberOfBlocks: Number of SD blocks to write
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+  SDIO_DataInitTypeDef sdio_datainitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t totalnumberofbytes = 0, bytestransferred = 0, count = 0, restwords = 0;
+  uint32_t *tempbuff = (uint32_t *)pWriteBuffer;
+  uint8_t cardstate  = 0;
+
+  /* Initialize data control register */
+  hsd->Instance->DCTRL = 0;
+
+  if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+  {
+    BlockSize = 512;
+    WriteAddr /= 512;
+  }
+
+  /* Set Block Size for Card */
+  sdio_cmdinitstructure.Argument         = (uint32_t)BlockSize;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+  sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+  sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+  sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  if(NumberOfBlocks > 1)
+  {
+    /* Send CMD25 WRITE_MULT_BLOCK with argument data address */
+    sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK;
+  }
+  else
+  {
+    /* Send CMD24 WRITE_SINGLE_BLOCK */
+    sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK;
+  }
+
+  sdio_cmdinitstructure.Argument         = (uint32_t)WriteAddr;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  if(NumberOfBlocks > 1)
+  {
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK);
+  }
+  else
+  {
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK);
+  }
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Set total number of bytes to write */
+  totalnumberofbytes = NumberOfBlocks * BlockSize;
+
+  /* Configure the SD DPSM (Data Path State Machine) */
+  sdio_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+  sdio_datainitstructure.DataLength    = NumberOfBlocks * BlockSize;
+  sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+  sdio_datainitstructure.TransferDir   = SDIO_TRANSFER_DIR_TO_CARD;
+  sdio_datainitstructure.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
+  sdio_datainitstructure.DPSM          = SDIO_DPSM_ENABLE;
+  SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+  /* Write block(s) in polling mode */
+  if(NumberOfBlocks > 1)
+  {
+#ifdef SDIO_STA_STBITERR
+    while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+    while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND))
+#endif /* SDIO_STA_STBITERR */
+    {
+      if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE))
+      {
+        if ((totalnumberofbytes - bytestransferred) < 32)
+        {
+          restwords = ((totalnumberofbytes - bytestransferred) % 4 == 0) ? ((totalnumberofbytes - bytestransferred) / 4) : (( totalnumberofbytes -  bytestransferred) / 4 + 1);
+
+          /* Write data to SDIO Tx FIFO */
+          for (count = 0; count < restwords; count++)
+          {
+            SDIO_WriteFIFO(hsd->Instance, tempbuff);
+            tempbuff++;
+            bytestransferred += 4;
+          }
+        }
+        else
+        {
+          /* Write data to SDIO Tx FIFO */
+          for (count = 0; count < 8; count++)
+          {
+            SDIO_WriteFIFO(hsd->Instance, (tempbuff + count));
+          }
+
+          tempbuff += 8;
+          bytestransferred += 32;
+        }
+      }
+    }
+  }
+  else
+  {
+    /* In case of single data block transfer no need of stop command at all */
+#ifdef SDIO_STA_STBITERR
+    while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+    while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+    {
+      if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE))
+      {
+        if ((totalnumberofbytes - bytestransferred) < 32)
+        {
+          restwords = ((totalnumberofbytes - bytestransferred) % 4 == 0) ? ((totalnumberofbytes - bytestransferred) / 4) : (( totalnumberofbytes -  bytestransferred) / 4 + 1);
+
+          /* Write data to SDIO Tx FIFO */
+          for (count = 0; count < restwords; count++)
+          {
+            SDIO_WriteFIFO(hsd->Instance, tempbuff);
+            tempbuff++;
+            bytestransferred += 4;
+          }
+        }
+        else
+        {
+          /* Write data to SDIO Tx FIFO */
+          for (count = 0; count < 8; count++)
+          {
+            SDIO_WriteFIFO(hsd->Instance, (tempbuff + count));
+          }
+
+          tempbuff += 8;
+          bytestransferred += 32;
+        }
+      }
+    }
+  }
+
+  /* Send stop transmission command in case of multiblock write */
+  if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1))
+  {
+    if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+      (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+    {
+      /* Send stop transmission command */
+      errorstate = HAL_SD_StopTransfer(hsd);
+    }
+  }
+
+  /* Get error state */
+  if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+    errorstate = SD_DATA_TIMEOUT;
+
+    return errorstate;
+  }
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+    errorstate = SD_DATA_CRC_FAIL;
+
+    return errorstate;
+  }
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR);
+
+    errorstate = SD_TX_UNDERRUN;
+
+    return errorstate;
+  }
+#ifdef SDIO_STA_STBITERR
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+    errorstate = SD_START_BIT_ERR;
+
+    return errorstate;
+  }
+#endif /* SDIO_STA_STBITERR */
+  else
+  {
+    /* No error flag set */
+  }
+
+  /* Clear all the static flags */
+  __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+  /* Wait till the card is in programming state */
+  errorstate = SD_IsCardProgramming(hsd, &cardstate);
+
+  while ((errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING)))
+  {
+    errorstate = SD_IsCardProgramming(hsd, &cardstate);
+  }
+
+  return errorstate;
+}
+
+/**
+  * @brief  Reads block(s) from a specified address in a card. The Data transfer
+  *         is managed by DMA mode.
+  * @note   This API should be followed by the function HAL_SD_CheckReadOperation()
+  *         to check the completion of the read process
+  * @param  hsd: SD handle
+  * @param  pReadBuffer: Pointer to the buffer that will contain the received data
+  * @param  ReadAddr: Address from where data is to be read
+  * @param  BlockSize: SD card Data block size
+  * @note   BlockSize must be 512 bytes.
+  * @param  NumberOfBlocks: Number of blocks to read.
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+  SDIO_DataInitTypeDef sdio_datainitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+  /* Initialize data control register */
+  hsd->Instance->DCTRL = 0;
+
+  /* Initialize handle flags */
+  hsd->SdTransferCplt  = 0;
+  hsd->DmaTransferCplt = 0;
+  hsd->SdTransferErr   = SD_OK;
+
+  /* Initialize SD Read operation */
+  if(NumberOfBlocks > 1)
+  {
+    hsd->SdOperation = SD_READ_MULTIPLE_BLOCK;
+  }
+  else
+  {
+    hsd->SdOperation = SD_READ_SINGLE_BLOCK;
+  }
+
+  /* Enable transfer interrupts */
+#ifdef SDIO_STA_STBITERR
+  __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+                                SDIO_IT_DTIMEOUT |\
+                                SDIO_IT_DATAEND  |\
+                                SDIO_IT_RXOVERR  |\
+                                SDIO_IT_STBITERR));
+#else /* SDIO_STA_STBITERR not defined */
+  __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+                                SDIO_IT_DTIMEOUT |\
+                                SDIO_IT_DATAEND  |\
+                                SDIO_IT_RXOVERR));
+#endif /* SDIO_STA_STBITERR */
+
+  /* Enable SDIO DMA transfer */
+  __HAL_SD_SDIO_DMA_ENABLE();
+
+  /* Configure DMA user callbacks */
+  hsd->hdmarx->XferCpltCallback  = SD_DMA_RxCplt;
+  hsd->hdmarx->XferErrorCallback = SD_DMA_RxError;
+
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(hsd->hdmarx, (uint32_t)&hsd->Instance->FIFO, (uint32_t)pReadBuffer, (uint32_t)(BlockSize * NumberOfBlocks)/4);
+
+  if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+  {
+    BlockSize = 512;
+    ReadAddr /= 512;
+  }
+
+  /* Set Block Size for Card */
+  sdio_cmdinitstructure.Argument         = (uint32_t)BlockSize;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+  sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+  sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+  sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Configure the SD DPSM (Data Path State Machine) */
+  sdio_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+  sdio_datainitstructure.DataLength    = BlockSize * NumberOfBlocks;
+  sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+  sdio_datainitstructure.TransferDir   = SDIO_TRANSFER_DIR_TO_SDIO;
+  sdio_datainitstructure.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
+  sdio_datainitstructure.DPSM          = SDIO_DPSM_ENABLE;
+  SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+  /* Check number of blocks command */
+  if(NumberOfBlocks > 1)
+  {
+    /* Send CMD18 READ_MULT_BLOCK with argument data address */
+    sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK;
+  }
+  else
+  {
+    /* Send CMD17 READ_SINGLE_BLOCK */
+    sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK;
+  }
+
+  sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  if(NumberOfBlocks > 1)
+  {
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK);
+  }
+  else
+  {
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK);
+  }
+
+  /* Update the SD transfer error in SD handle */
+  hsd->SdTransferErr = errorstate;
+
+  return errorstate;
+}
+
+
+/**
+  * @brief  Writes block(s) to a specified address in a card. The Data transfer
+  *         is managed by DMA mode.
+  * @note   This API should be followed by the function HAL_SD_CheckWriteOperation()
+  *         to check the completion of the write process (by SD current status polling).
+  * @param  hsd: SD handle
+  * @param  pWriteBuffer: pointer to the buffer that will contain the data to transmit
+  * @param  WriteAddr: Address from where data is to be read
+  * @param  BlockSize: the SD card Data block size
+  * @note   BlockSize must be 512 bytes.
+  * @param  NumberOfBlocks: Number of blocks to write
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+  SDIO_DataInitTypeDef sdio_datainitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+  /* Initialize data control register */
+  hsd->Instance->DCTRL = 0;
+
+  /* Initialize handle flags */
+  hsd->SdTransferCplt  = 0;
+  hsd->DmaTransferCplt = 0;
+  hsd->SdTransferErr   = SD_OK;
+
+  /* Initialize SD Write operation */
+  if(NumberOfBlocks > 1)
+  {
+    hsd->SdOperation = SD_WRITE_MULTIPLE_BLOCK;
+  }
+  else
+  {
+    hsd->SdOperation = SD_WRITE_SINGLE_BLOCK;
+  }
+
+  /* Enable transfer interrupts */
+#ifdef SDIO_STA_STBITERR
+  __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+                                SDIO_IT_DTIMEOUT |\
+                                SDIO_IT_DATAEND  |\
+                                SDIO_IT_TXUNDERR |\
+                                SDIO_IT_STBITERR));
+#else /* SDIO_STA_STBITERR not defined */
+  __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+                                SDIO_IT_DTIMEOUT |\
+                                SDIO_IT_DATAEND  |\
+                                SDIO_IT_TXUNDERR));
+#endif /* SDIO_STA_STBITERR */
+
+  /* Configure DMA user callbacks */
+  hsd->hdmatx->XferCpltCallback  = SD_DMA_TxCplt;
+  hsd->hdmatx->XferErrorCallback = SD_DMA_TxError;
+
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(hsd->hdmatx, (uint32_t)pWriteBuffer, (uint32_t)&hsd->Instance->FIFO, (uint32_t)(BlockSize * NumberOfBlocks)/4);
+
+  /* Enable SDIO DMA transfer */
+  __HAL_SD_SDIO_DMA_ENABLE();
+
+  if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+  {
+    BlockSize = 512;
+    WriteAddr /= 512;
+  }
+
+  /* Set Block Size for Card */
+  sdio_cmdinitstructure.Argument         = (uint32_t)BlockSize;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+  sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+  sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+  sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Check number of blocks command */
+  if(NumberOfBlocks <= 1)
+  {
+    /* Send CMD24 WRITE_SINGLE_BLOCK */
+    sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK;
+  }
+  else
+  {
+    /* Send CMD25 WRITE_MULT_BLOCK with argument data address */
+    sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK;
+  }
+
+  sdio_cmdinitstructure.Argument         = (uint32_t)WriteAddr;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  if(NumberOfBlocks > 1)
+  {
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK);
+  }
+  else
+  {
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK);
+  }
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Configure the SD DPSM (Data Path State Machine) */
+  sdio_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+  sdio_datainitstructure.DataLength    = BlockSize * NumberOfBlocks;
+  sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+  sdio_datainitstructure.TransferDir   = SDIO_TRANSFER_DIR_TO_CARD;
+  sdio_datainitstructure.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
+  sdio_datainitstructure.DPSM          = SDIO_DPSM_ENABLE;
+  SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+  hsd->SdTransferErr = errorstate;
+
+  return errorstate;
+}
+
+/**
+  * @brief  This function waits until the SD DMA data read transfer is finished.
+  *         This API should be called after HAL_SD_ReadBlocks_DMA() function
+  *         to insure that all data sent by the card is already transferred by the
+  *         DMA controller.
+  * @param  hsd: SD handle
+  * @param  Timeout: Timeout duration
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t timeout = Timeout;
+  uint32_t tmp1, tmp2;
+  HAL_SD_ErrorTypedef tmp3;
+
+  /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */
+  tmp1 = hsd->DmaTransferCplt;
+  tmp2 = hsd->SdTransferCplt;
+  tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+
+  while ((tmp1 == 0) && (tmp2 == 0) && (tmp3 == SD_OK) && (timeout > 0))
+  {
+    tmp1 = hsd->DmaTransferCplt;
+    tmp2 = hsd->SdTransferCplt;
+    tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+    timeout--;
+  }
+
+  timeout = Timeout;
+
+  /* Wait until the Rx transfer is no longer active */
+  while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXACT)) && (timeout > 0))
+  {
+    timeout--;
+  }
+
+  /* Send stop command in multiblock read */
+  if (hsd->SdOperation == SD_READ_MULTIPLE_BLOCK)
+  {
+    errorstate = HAL_SD_StopTransfer(hsd);
+  }
+
+  if ((timeout == 0) && (errorstate == SD_OK))
+  {
+    errorstate = SD_DATA_TIMEOUT;
+  }
+
+  /* Clear all the static flags */
+  __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+  /* Return error state */
+  if (hsd->SdTransferErr != SD_OK)
+  {
+    return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr);
+  }
+
+  return errorstate;
+}
+
+/**
+  * @brief  This function waits until the SD DMA data write transfer is finished.
+  *         This API should be called after HAL_SD_WriteBlocks_DMA() function
+  *         to insure that all data sent by the card is already transferred by the
+  *         DMA controller.
+  * @param  hsd: SD handle
+  * @param  Timeout: Timeout duration
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t timeout = Timeout;
+  uint32_t tmp1, tmp2;
+  HAL_SD_ErrorTypedef tmp3;
+
+  /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */
+  tmp1 = hsd->DmaTransferCplt;
+  tmp2 = hsd->SdTransferCplt;
+  tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+
+  while ((tmp1 == 0) && (tmp2 == 0) && (tmp3 == SD_OK) && (timeout > 0))
+  {
+    tmp1 = hsd->DmaTransferCplt;
+    tmp2 = hsd->SdTransferCplt;
+    tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+    timeout--;
+  }
+
+  timeout = Timeout;
+
+  /* Wait until the Tx transfer is no longer active */
+  while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXACT))  && (timeout > 0))
+  {
+    timeout--;
+  }
+
+  /* Send stop command in multiblock write */
+  if (hsd->SdOperation == SD_WRITE_MULTIPLE_BLOCK)
+  {
+    errorstate = HAL_SD_StopTransfer(hsd);
+  }
+
+  if ((timeout == 0) && (errorstate == SD_OK))
+  {
+    errorstate = SD_DATA_TIMEOUT;
+  }
+
+  /* Clear all the static flags */
+  __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+  /* Return error state */
+  if (hsd->SdTransferErr != SD_OK)
+  {
+    return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr);
+  }
+
+  /* Wait until write is complete */
+  while(HAL_SD_GetStatus(hsd) != SD_TRANSFER_OK)
+  {
+  }
+
+  return errorstate;
+}
+
+/**
+  * @brief  Erases the specified memory area of the given SD card.
+  * @param  hsd: SD handle
+  * @param  startaddr: Start byte address
+  * @param  endaddr: End byte address
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+
+  uint32_t delay         = 0;
+  __IO uint32_t maxdelay = 0;
+  uint8_t cardstate      = 0;
+
+  /* Check if the card command class supports erase command */
+  if (((hsd->CSD[1] >> 20) & SD_CCCC_ERASE) == 0)
+  {
+    errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+    return errorstate;
+  }
+
+  /* Get max delay value */
+  maxdelay = 120000 / (((hsd->Instance->CLKCR) & 0xFF) + 2);
+
+  if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+  {
+    errorstate = SD_LOCK_UNLOCK_FAILED;
+
+    return errorstate;
+  }
+
+  /* Get start and end block for high capacity cards */
+  if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+  {
+    startaddr /= 512;
+    endaddr   /= 512;
+  }
+
+  /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */
+  if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+    (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+  {
+    /* Send CMD32 SD_ERASE_GRP_START with argument as addr  */
+    sdio_cmdinitstructure.Argument         =(uint32_t)startaddr;
+    sdio_cmdinitstructure.CmdIndex         = SD_CMD_SD_ERASE_GRP_START;
+    sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+    sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+    sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+    SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_START);
+
+    if (errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+
+    /* Send CMD33 SD_ERASE_GRP_END with argument as addr  */
+    sdio_cmdinitstructure.Argument         = (uint32_t)endaddr;
+    sdio_cmdinitstructure.CmdIndex         = SD_CMD_SD_ERASE_GRP_END;
+    SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_END);
+
+    if (errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+  }
+
+  /* Send CMD38 ERASE */
+  sdio_cmdinitstructure.Argument         = 0;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_ERASE;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_ERASE);
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  for (; delay < maxdelay; delay++)
+  {
+  }
+
+  /* Wait until the card is in programming state */
+  errorstate = SD_IsCardProgramming(hsd, &cardstate);
+
+  delay = SD_DATATIMEOUT;
+
+  while ((delay > 0) && (errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING)))
+  {
+    errorstate = SD_IsCardProgramming(hsd, &cardstate);
+    delay--;
+  }
+
+  return errorstate;
+}
+
+/**
+  * @brief  This function handles SD card interrupt request.
+  * @param  hsd: SD handle
+  * @retval None
+  */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd)
+{
+  /* Check for SDIO interrupt flags */
+  if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DATAEND))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_IT_DATAEND);
+
+    /* SD transfer is complete */
+    hsd->SdTransferCplt = 1;
+
+    /* No transfer error */
+    hsd->SdTransferErr  = SD_OK;
+
+    HAL_SD_XferCpltCallback(hsd);
+  }
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DCRCFAIL))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+    hsd->SdTransferErr = SD_DATA_CRC_FAIL;
+
+    HAL_SD_XferErrorCallback(hsd);
+
+  }
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DTIMEOUT))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+    hsd->SdTransferErr = SD_DATA_TIMEOUT;
+
+    HAL_SD_XferErrorCallback(hsd);
+  }
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_RXOVERR))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+    hsd->SdTransferErr = SD_RX_OVERRUN;
+
+    HAL_SD_XferErrorCallback(hsd);
+  }
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_TXUNDERR))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR);
+
+    hsd->SdTransferErr = SD_TX_UNDERRUN;
+
+    HAL_SD_XferErrorCallback(hsd);
+  }
+#ifdef SDIO_STA_STBITERR
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_STBITERR))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+    hsd->SdTransferErr = SD_START_BIT_ERR;
+
+    HAL_SD_XferErrorCallback(hsd);
+  }
+#endif /* SDIO_STA_STBITERR */
+  else
+  {
+    /* No error flag set */
+  }
+
+  /* Disable all SDIO peripheral interrupt sources */
+#ifdef SDIO_STA_STBITERR
+  __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND  |\
+                                SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\
+                                SDIO_IT_RXOVERR  | SDIO_IT_STBITERR);
+#else /* SDIO_STA_STBITERR not defined */
+  __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND  |\
+                                SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\
+                                SDIO_IT_RXOVERR);
+#endif /* SDIO_STA_STBITERR */
+}
+
+
+/**
+  * @brief  SD end of transfer callback.
+  * @param  hsd: SD handle
+  * @retval None
+  */
+__weak void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_XferCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  SD Transfer Error callback.
+  * @param  hsd: SD handle
+  * @retval None
+  */
+__weak void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_XferErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  SD Transfer complete Rx callback in non blocking mode.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+__weak void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_DMA_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  SD DMA transfer complete Rx error callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+__weak void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_DMA_RxErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  SD Transfer complete Tx callback in non blocking mode.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+__weak void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_DMA_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  SD DMA transfer complete error Tx callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+__weak void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_DMA_TxErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup SD_Exported_Functions_Group3
+ *  @brief   management functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### Peripheral Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control the SD card
+    operations.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns information about specific card.
+  * @param  hsd: SD handle
+  * @param  pCardInfo: Pointer to a HAL_SD_CardInfoTypedef structure that
+  *         contains all SD cardinformation
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t tmp = 0;
+
+  pCardInfo->CardType = (uint8_t)(hsd->CardType);
+  pCardInfo->RCA      = (uint16_t)(hsd->RCA);
+
+  /* Byte 0 */
+  tmp = (hsd->CSD[0] & 0xFF000000) >> 24;
+  pCardInfo->SD_csd.CSDStruct      = (uint8_t)((tmp & 0xC0) >> 6);
+  pCardInfo->SD_csd.SysSpecVersion = (uint8_t)((tmp & 0x3C) >> 2);
+  pCardInfo->SD_csd.Reserved1      = tmp & 0x03;
+
+  /* Byte 1 */
+  tmp = (hsd->CSD[0] & 0x00FF0000) >> 16;
+  pCardInfo->SD_csd.TAAC = (uint8_t)tmp;
+
+  /* Byte 2 */
+  tmp = (hsd->CSD[0] & 0x0000FF00) >> 8;
+  pCardInfo->SD_csd.NSAC = (uint8_t)tmp;
+
+  /* Byte 3 */
+  tmp = hsd->CSD[0] & 0x000000FF;
+  pCardInfo->SD_csd.MaxBusClkFrec = (uint8_t)tmp;
+
+  /* Byte 4 */
+  tmp = (hsd->CSD[1] & 0xFF000000) >> 24;
+  pCardInfo->SD_csd.CardComdClasses = (uint16_t)(tmp << 4);
+
+  /* Byte 5 */
+  tmp = (hsd->CSD[1] & 0x00FF0000) >> 16;
+  pCardInfo->SD_csd.CardComdClasses |= (uint16_t)((tmp & 0xF0) >> 4);
+  pCardInfo->SD_csd.RdBlockLen       = (uint8_t)(tmp & 0x0F);
+
+  /* Byte 6 */
+  tmp = (hsd->CSD[1] & 0x0000FF00) >> 8;
+  pCardInfo->SD_csd.PartBlockRead   = (uint8_t)((tmp & 0x80) >> 7);
+  pCardInfo->SD_csd.WrBlockMisalign = (uint8_t)((tmp & 0x40) >> 6);
+  pCardInfo->SD_csd.RdBlockMisalign = (uint8_t)((tmp & 0x20) >> 5);
+  pCardInfo->SD_csd.DSRImpl         = (uint8_t)((tmp & 0x10) >> 4);
+  pCardInfo->SD_csd.Reserved2       = 0; /*!< Reserved */
+
+  if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0))
+  {
+    pCardInfo->SD_csd.DeviceSize = (tmp & 0x03) << 10;
+
+    /* Byte 7 */
+    tmp = (uint8_t)(hsd->CSD[1] & 0x000000FF);
+    pCardInfo->SD_csd.DeviceSize |= (tmp) << 2;
+
+    /* Byte 8 */
+    tmp = (uint8_t)((hsd->CSD[2] & 0xFF000000) >> 24);
+    pCardInfo->SD_csd.DeviceSize |= (tmp & 0xC0) >> 6;
+
+    pCardInfo->SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38) >> 3;
+    pCardInfo->SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07);
+
+    /* Byte 9 */
+    tmp = (uint8_t)((hsd->CSD[2] & 0x00FF0000) >> 16);
+    pCardInfo->SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0) >> 5;
+    pCardInfo->SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1C) >> 2;
+    pCardInfo->SD_csd.DeviceSizeMul      = (tmp & 0x03) << 1;
+    /* Byte 10 */
+    tmp = (uint8_t)((hsd->CSD[2] & 0x0000FF00) >> 8);
+    pCardInfo->SD_csd.DeviceSizeMul |= (tmp & 0x80) >> 7;
+
+    pCardInfo->CardCapacity  = (pCardInfo->SD_csd.DeviceSize + 1) ;
+    pCardInfo->CardCapacity *= (1 << (pCardInfo->SD_csd.DeviceSizeMul + 2));
+    pCardInfo->CardBlockSize = 1 << (pCardInfo->SD_csd.RdBlockLen);
+    pCardInfo->CardCapacity *= pCardInfo->CardBlockSize;
+  }
+  else if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+  {
+    /* Byte 7 */
+    tmp = (uint8_t)(hsd->CSD[1] & 0x000000FF);
+    pCardInfo->SD_csd.DeviceSize = (tmp & 0x3F) << 16;
+
+    /* Byte 8 */
+    tmp = (uint8_t)((hsd->CSD[2] & 0xFF000000) >> 24);
+
+    pCardInfo->SD_csd.DeviceSize |= (tmp << 8);
+
+    /* Byte 9 */
+    tmp = (uint8_t)((hsd->CSD[2] & 0x00FF0000) >> 16);
+
+    pCardInfo->SD_csd.DeviceSize |= (tmp);
+
+    /* Byte 10 */
+    tmp = (uint8_t)((hsd->CSD[2] & 0x0000FF00) >> 8);
+
+    pCardInfo->CardCapacity = (uint64_t)((((uint64_t)pCardInfo->SD_csd.DeviceSize + 1)) * 512 * 1024);
+    pCardInfo->CardBlockSize = 512;
+  }
+  else
+  {
+    /* Not supported card type */
+    errorstate = SD_ERROR;
+  }
+
+  pCardInfo->SD_csd.EraseGrSize = (tmp & 0x40) >> 6;
+  pCardInfo->SD_csd.EraseGrMul  = (tmp & 0x3F) << 1;
+
+  /* Byte 11 */
+  tmp = (uint8_t)(hsd->CSD[2] & 0x000000FF);
+  pCardInfo->SD_csd.EraseGrMul     |= (tmp & 0x80) >> 7;
+  pCardInfo->SD_csd.WrProtectGrSize = (tmp & 0x7F);
+
+  /* Byte 12 */
+  tmp = (uint8_t)((hsd->CSD[3] & 0xFF000000) >> 24);
+  pCardInfo->SD_csd.WrProtectGrEnable = (tmp & 0x80) >> 7;
+  pCardInfo->SD_csd.ManDeflECC        = (tmp & 0x60) >> 5;
+  pCardInfo->SD_csd.WrSpeedFact       = (tmp & 0x1C) >> 2;
+  pCardInfo->SD_csd.MaxWrBlockLen     = (tmp & 0x03) << 2;
+
+  /* Byte 13 */
+  tmp = (uint8_t)((hsd->CSD[3] & 0x00FF0000) >> 16);
+  pCardInfo->SD_csd.MaxWrBlockLen      |= (tmp & 0xC0) >> 6;
+  pCardInfo->SD_csd.WriteBlockPaPartial = (tmp & 0x20) >> 5;
+  pCardInfo->SD_csd.Reserved3           = 0;
+  pCardInfo->SD_csd.ContentProtectAppli = (tmp & 0x01);
+
+  /* Byte 14 */
+  tmp = (uint8_t)((hsd->CSD[3] & 0x0000FF00) >> 8);
+  pCardInfo->SD_csd.FileFormatGrouop = (tmp & 0x80) >> 7;
+  pCardInfo->SD_csd.CopyFlag         = (tmp & 0x40) >> 6;
+  pCardInfo->SD_csd.PermWrProtect    = (tmp & 0x20) >> 5;
+  pCardInfo->SD_csd.TempWrProtect    = (tmp & 0x10) >> 4;
+  pCardInfo->SD_csd.FileFormat       = (tmp & 0x0C) >> 2;
+  pCardInfo->SD_csd.ECC              = (tmp & 0x03);
+
+  /* Byte 15 */
+  tmp = (uint8_t)(hsd->CSD[3] & 0x000000FF);
+  pCardInfo->SD_csd.CSD_CRC   = (tmp & 0xFE) >> 1;
+  pCardInfo->SD_csd.Reserved4 = 1;
+
+  /* Byte 0 */
+  tmp = (uint8_t)((hsd->CID[0] & 0xFF000000) >> 24);
+  pCardInfo->SD_cid.ManufacturerID = tmp;
+
+  /* Byte 1 */
+  tmp = (uint8_t)((hsd->CID[0] & 0x00FF0000) >> 16);
+  pCardInfo->SD_cid.OEM_AppliID = tmp << 8;
+
+  /* Byte 2 */
+  tmp = (uint8_t)((hsd->CID[0] & 0x000000FF00) >> 8);
+  pCardInfo->SD_cid.OEM_AppliID |= tmp;
+
+  /* Byte 3 */
+  tmp = (uint8_t)(hsd->CID[0] & 0x000000FF);
+  pCardInfo->SD_cid.ProdName1 = tmp << 24;
+
+  /* Byte 4 */
+  tmp = (uint8_t)((hsd->CID[1] & 0xFF000000) >> 24);
+  pCardInfo->SD_cid.ProdName1 |= tmp << 16;
+
+  /* Byte 5 */
+  tmp = (uint8_t)((hsd->CID[1] & 0x00FF0000) >> 16);
+  pCardInfo->SD_cid.ProdName1 |= tmp << 8;
+
+  /* Byte 6 */
+  tmp = (uint8_t)((hsd->CID[1] & 0x0000FF00) >> 8);
+  pCardInfo->SD_cid.ProdName1 |= tmp;
+
+  /* Byte 7 */
+  tmp = (uint8_t)(hsd->CID[1] & 0x000000FF);
+  pCardInfo->SD_cid.ProdName2 = tmp;
+
+  /* Byte 8 */
+  tmp = (uint8_t)((hsd->CID[2] & 0xFF000000) >> 24);
+  pCardInfo->SD_cid.ProdRev = tmp;
+
+  /* Byte 9 */
+  tmp = (uint8_t)((hsd->CID[2] & 0x00FF0000) >> 16);
+  pCardInfo->SD_cid.ProdSN = tmp << 24;
+
+  /* Byte 10 */
+  tmp = (uint8_t)((hsd->CID[2] & 0x0000FF00) >> 8);
+  pCardInfo->SD_cid.ProdSN |= tmp << 16;
+
+  /* Byte 11 */
+  tmp = (uint8_t)(hsd->CID[2] & 0x000000FF);
+  pCardInfo->SD_cid.ProdSN |= tmp << 8;
+
+  /* Byte 12 */
+  tmp = (uint8_t)((hsd->CID[3] & 0xFF000000) >> 24);
+  pCardInfo->SD_cid.ProdSN |= tmp;
+
+  /* Byte 13 */
+  tmp = (uint8_t)((hsd->CID[3] & 0x00FF0000) >> 16);
+  pCardInfo->SD_cid.Reserved1   |= (tmp & 0xF0) >> 4;
+  pCardInfo->SD_cid.ManufactDate = (tmp & 0x0F) << 8;
+
+  /* Byte 14 */
+  tmp = (uint8_t)((hsd->CID[3] & 0x0000FF00) >> 8);
+  pCardInfo->SD_cid.ManufactDate |= tmp;
+
+  /* Byte 15 */
+  tmp = (uint8_t)(hsd->CID[3] & 0x000000FF);
+  pCardInfo->SD_cid.CID_CRC   = (tmp & 0xFE) >> 1;
+  pCardInfo->SD_cid.Reserved2 = 1;
+
+  return errorstate;
+}
+
+/**
+  * @brief  Enables wide bus operation for the requested card if supported by
+  *         card.
+  * @param  hsd: SD handle
+  * @param  WideMode: Specifies the SD card wide bus mode
+  *          This parameter can be one of the following values:
+  *            @arg SDIO_BUS_WIDE_8B: 8-bit data transfer (Only for MMC)
+  *            @arg SDIO_BUS_WIDE_4B: 4-bit data transfer
+  *            @arg SDIO_BUS_WIDE_1B: 1-bit data transfer
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  SDIO_InitTypeDef tmpinit;
+
+  /* MMC Card does not support this feature */
+  if (hsd->CardType == MULTIMEDIA_CARD)
+  {
+    errorstate = SD_UNSUPPORTED_FEATURE;
+
+    return errorstate;
+  }
+  else if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+    (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+  {
+    if (WideMode == SDIO_BUS_WIDE_8B)
+    {
+      errorstate = SD_UNSUPPORTED_FEATURE;
+    }
+    else if (WideMode == SDIO_BUS_WIDE_4B)
+    {
+      errorstate = SD_WideBus_Enable(hsd);
+    }
+    else if (WideMode == SDIO_BUS_WIDE_1B)
+    {
+      errorstate = SD_WideBus_Disable(hsd);
+    }
+    else
+    {
+      /* WideMode is not a valid argument*/
+      errorstate = SD_INVALID_PARAMETER;
+    }
+
+    if (errorstate == SD_OK)
+    {
+      /* Configure the SDIO peripheral */
+      tmpinit.ClockEdge           = hsd->Init.ClockEdge;
+      tmpinit.ClockBypass         = hsd->Init.ClockBypass;
+      tmpinit.ClockPowerSave      = hsd->Init.ClockPowerSave;
+      tmpinit.BusWide             = WideMode;
+      tmpinit.HardwareFlowControl = hsd->Init.HardwareFlowControl;
+      tmpinit.ClockDiv            = hsd->Init.ClockDiv;
+      SDIO_Init(hsd->Instance, tmpinit);
+    }
+  }
+
+  return errorstate;
+}
+
+/**
+  * @brief  Aborts an ongoing data transfer.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd)
+{
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+  /* Send CMD12 STOP_TRANSMISSION  */
+  sdio_cmdinitstructure.Argument         = 0;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_STOP_TRANSMISSION;
+  sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+  sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+  sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_STOP_TRANSMISSION);
+
+  return errorstate;
+}
+
+/**
+  * @brief  Switches the SD card to High Speed mode.
+  *         This API must be used after "Transfer State"
+  * @note   This operation should be followed by the configuration
+  *         of PLL to have SDIOCK clock between 67 and 75 MHz
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+  SDIO_DataInitTypeDef sdio_datainitstructure;
+
+  uint8_t SD_hs[64]  = {0};
+  uint32_t SD_scr[2] = {0, 0};
+  uint32_t SD_SPEC   = 0 ;
+  uint32_t count = 0, *tempbuff = (uint32_t *)SD_hs;
+
+  /* Initialize the Data control register */
+  hsd->Instance->DCTRL = 0;
+
+  /* Get SCR Register */
+  errorstate = SD_FindSCR(hsd, SD_scr);
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Test the Version supported by the card*/
+  SD_SPEC = (SD_scr[1]  & 0x01000000) | (SD_scr[1]  & 0x02000000);
+
+  if (SD_SPEC != SD_ALLZERO)
+  {
+    /* Set Block Size for Card */
+    sdio_cmdinitstructure.Argument         = (uint32_t)64;
+    sdio_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+    sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+    sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+    sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+    SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+    if (errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+
+    /* Configure the SD DPSM (Data Path State Machine) */
+    sdio_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+    sdio_datainitstructure.DataLength    = 64;
+    sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B ;
+    sdio_datainitstructure.TransferDir   = SDIO_TRANSFER_DIR_TO_SDIO;
+    sdio_datainitstructure.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
+    sdio_datainitstructure.DPSM          = SDIO_DPSM_ENABLE;
+    SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+    /* Send CMD6 switch mode */
+    sdio_cmdinitstructure.Argument         = 0x80FFFF01;
+    sdio_cmdinitstructure.CmdIndex         = SD_CMD_HS_SWITCH;
+    SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_HS_SWITCH);
+
+    if (errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+#ifdef SDIO_STA_STBITERR
+    while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR */
+    while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+    {
+      if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+      {
+        for (count = 0; count < 8; count++)
+        {
+          *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
+        }
+
+        tempbuff += 8;
+      }
+    }
+
+    if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+    {
+      __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+      errorstate = SD_DATA_TIMEOUT;
+
+      return errorstate;
+    }
+    else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+    {
+      __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+      errorstate = SD_DATA_CRC_FAIL;
+
+      return errorstate;
+    }
+    else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+    {
+      __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+      errorstate = SD_RX_OVERRUN;
+
+      return errorstate;
+    }
+#ifdef SDIO_STA_STBITERR
+    else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+    {
+      __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+      errorstate = SD_START_BIT_ERR;
+
+      return errorstate;
+    }
+#endif /* SDIO_STA_STBITERR */
+    else
+    {
+      /* No error flag set */
+    }
+
+    count = SD_DATATIMEOUT;
+
+    while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0))
+    {
+      *tempbuff = SDIO_ReadFIFO(hsd->Instance);
+      tempbuff++;
+      count--;
+    }
+
+    /* Clear all the static flags */
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+    /* Test if the switch mode HS is ok */
+    if ((SD_hs[13]& 2) != 2)
+    {
+      errorstate = SD_UNSUPPORTED_FEATURE;
+    }
+  }
+
+  return errorstate;
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup SD_Exported_Functions_Group4
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### Peripheral State functions #####
+  ==============================================================================
+  [..]
+    This subsection permits to get in runtime the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the current SD card's status.
+  * @param  hsd: SD handle
+  * @param  pSDstatus: Pointer to the buffer that will contain the SD card status
+  *         SD Status register)
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus)
+{
+  SDIO_CmdInitTypeDef  sdio_cmdinitstructure;
+  SDIO_DataInitTypeDef sdio_datainitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t count = 0;
+
+  /* Check SD response */
+  if ((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+  {
+    errorstate = SD_LOCK_UNLOCK_FAILED;
+
+    return errorstate;
+  }
+
+  /* Set block size for card if it is not equal to current block size for card */
+  sdio_cmdinitstructure.Argument         = 64;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+  sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+  sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+  sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Send CMD55 */
+  sdio_cmdinitstructure.Argument         = (uint32_t)(hsd->RCA << 16);
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_APP_CMD;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Configure the SD DPSM (Data Path State Machine) */
+  sdio_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+  sdio_datainitstructure.DataLength    = 64;
+  sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B;
+  sdio_datainitstructure.TransferDir   = SDIO_TRANSFER_DIR_TO_SDIO;
+  sdio_datainitstructure.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
+  sdio_datainitstructure.DPSM          = SDIO_DPSM_ENABLE;
+  SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+  /* Send ACMD13 (SD_APP_STATUS)  with argument as card's RCA */
+  sdio_cmdinitstructure.Argument         = 0;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_SD_APP_STATUS;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_STATUS);
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Get status data */
+#ifdef SDIO_STA_STBITERR
+  while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+  while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+  {
+    if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+    {
+      for (count = 0; count < 8; count++)
+      {
+        *(pSDstatus + count) = SDIO_ReadFIFO(hsd->Instance);
+      }
+
+      pSDstatus += 8;
+    }
+  }
+
+  if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+    errorstate = SD_DATA_TIMEOUT;
+
+    return errorstate;
+  }
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+    errorstate = SD_DATA_CRC_FAIL;
+
+    return errorstate;
+  }
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+    errorstate = SD_RX_OVERRUN;
+
+    return errorstate;
+  }
+#ifdef SDIO_STA_STBITERR
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+    errorstate = SD_START_BIT_ERR;
+
+    return errorstate;
+  }
+#endif /* SDIO_STA_STBITERR */
+  else
+  {
+    /* No error flag set */
+  }
+
+  count = SD_DATATIMEOUT;
+  while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0))
+  {
+    *pSDstatus = SDIO_ReadFIFO(hsd->Instance);
+    pSDstatus++;
+    count--;
+  }
+
+  /* Clear all the static status flags*/
+  __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+  return errorstate;
+}
+
+/**
+  * @brief  Gets the current sd card data status.
+  * @param  hsd: SD handle
+  * @retval Data Transfer state
+  */
+HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd)
+{
+  HAL_SD_CardStateTypedef cardstate =  SD_CARD_TRANSFER;
+
+  /* Get SD card state */
+  cardstate = SD_GetState(hsd);
+
+  /* Find SD status according to card state*/
+  if (cardstate == SD_CARD_TRANSFER)
+  {
+    return SD_TRANSFER_OK;
+  }
+  else if(cardstate == SD_CARD_ERROR)
+  {
+    return SD_TRANSFER_ERROR;
+  }
+  else
+  {
+    return SD_TRANSFER_BUSY;
+  }
+}
+
+/**
+  * @brief  Gets the SD card status.
+  * @param  hsd: SD handle
+  * @param  pCardStatus: Pointer to the HAL_SD_CardStatusTypedef structure that
+  *         will contain the SD card status information
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t tmp = 0;
+  uint32_t sd_status[16];
+
+  errorstate = HAL_SD_SendSDStatus(hsd, sd_status);
+
+  if (errorstate  != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Byte 0 */
+  tmp = (sd_status[0] & 0xC0) >> 6;
+  pCardStatus->DAT_BUS_WIDTH = (uint8_t)tmp;
+
+  /* Byte 0 */
+  tmp = (sd_status[0] & 0x20) >> 5;
+  pCardStatus->SECURED_MODE = (uint8_t)tmp;
+
+  /* Byte 2 */
+  tmp = (sd_status[2] & 0xFF);
+  pCardStatus->SD_CARD_TYPE = (uint8_t)(tmp << 8);
+
+  /* Byte 3 */
+  tmp = (sd_status[3] & 0xFF);
+  pCardStatus->SD_CARD_TYPE |= (uint8_t)tmp;
+
+  /* Byte 4 */
+  tmp = (sd_status[4] & 0xFF);
+  pCardStatus->SIZE_OF_PROTECTED_AREA = (uint8_t)(tmp << 24);
+
+  /* Byte 5 */
+  tmp = (sd_status[5] & 0xFF);
+  pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 16);
+
+  /* Byte 6 */
+  tmp = (sd_status[6] & 0xFF);
+  pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 8);
+
+  /* Byte 7 */
+  tmp = (sd_status[7] & 0xFF);
+  pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)tmp;
+
+  /* Byte 8 */
+  tmp = (sd_status[8] & 0xFF);
+  pCardStatus->SPEED_CLASS = (uint8_t)tmp;
+
+  /* Byte 9 */
+  tmp = (sd_status[9] & 0xFF);
+  pCardStatus->PERFORMANCE_MOVE = (uint8_t)tmp;
+
+  /* Byte 10 */
+  tmp = (sd_status[10] & 0xF0) >> 4;
+  pCardStatus->AU_SIZE = (uint8_t)tmp;
+
+  /* Byte 11 */
+  tmp = (sd_status[11] & 0xFF);
+  pCardStatus->ERASE_SIZE = (uint8_t)(tmp << 8);
+
+  /* Byte 12 */
+  tmp = (sd_status[12] & 0xFF);
+  pCardStatus->ERASE_SIZE |= (uint8_t)tmp;
+
+  /* Byte 13 */
+  tmp = (sd_status[13] & 0xFC) >> 2;
+  pCardStatus->ERASE_TIMEOUT = (uint8_t)tmp;
+
+  /* Byte 13 */
+  tmp = (sd_status[13] & 0x3);
+  pCardStatus->ERASE_OFFSET = (uint8_t)tmp;
+
+  return errorstate;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private function ----------------------------------------------------------*/
+/** @addtogroup SD_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  SD DMA transfer complete Rx callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma)
+{
+  SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* DMA transfer is complete */
+  hsd->DmaTransferCplt = 1;
+
+  /* Wait until SD transfer is complete */
+  while(hsd->SdTransferCplt == 0)
+  {
+  }
+
+  /* Disable the DMA channel */
+  HAL_DMA_Abort(hdma);
+
+  /* Transfer complete user callback */
+  HAL_SD_DMA_RxCpltCallback(hsd->hdmarx);
+}
+
+/**
+  * @brief  SD DMA transfer Error Rx callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SD_DMA_RxError(DMA_HandleTypeDef *hdma)
+{
+  SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Transfer complete user callback */
+  HAL_SD_DMA_RxErrorCallback(hsd->hdmarx);
+}
+
+/**
+  * @brief  SD DMA transfer complete Tx callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma)
+{
+  SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* DMA transfer is complete */
+  hsd->DmaTransferCplt = 1;
+
+  /* Wait until SD transfer is complete */
+  while(hsd->SdTransferCplt == 0)
+  {
+  }
+
+  /* Disable the DMA channel */
+  HAL_DMA_Abort(hdma);
+
+  /* Transfer complete user callback */
+  HAL_SD_DMA_TxCpltCallback(hsd->hdmatx);
+}
+
+/**
+  * @brief  SD DMA transfer Error Tx callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SD_DMA_TxError(DMA_HandleTypeDef *hdma)
+{
+  SD_HandleTypeDef *hsd = ( SD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Transfer complete user callback */
+  HAL_SD_DMA_TxErrorCallback(hsd->hdmatx);
+}
+
+/**
+  * @brief  Returns the SD current state.
+  * @param  hsd: SD handle
+  * @retval SD card current state
+  */
+static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd)
+{
+  uint32_t resp1 = 0;
+
+  if (SD_SendStatus(hsd, &resp1) != SD_OK)
+  {
+    return SD_CARD_ERROR;
+  }
+  else
+  {
+    return (HAL_SD_CardStateTypedef)((resp1 >> 9) & 0x0F);
+  }
+}
+
+/**
+  * @brief  Initializes all cards or single card as the case may be Card(s) come
+  *         into standby state.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd)
+{
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint16_t sd_rca = 1;
+
+  if(SDIO_GetPowerState(hsd->Instance) == 0) /* Power off */
+  {
+    errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+    return errorstate;
+  }
+
+  if(hsd->CardType != SECURE_DIGITAL_IO_CARD)
+  {
+    /* Send CMD2 ALL_SEND_CID */
+    sdio_cmdinitstructure.Argument         = 0;
+    sdio_cmdinitstructure.CmdIndex         = SD_CMD_ALL_SEND_CID;
+    sdio_cmdinitstructure.Response         = SDIO_RESPONSE_LONG;
+    sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+    sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+    SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+    /* Check for error conditions */
+    errorstate = SD_CmdResp2Error(hsd);
+
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+
+    /* Get Card identification number data */
+    hsd->CID[0] = SDIO_GetResponse(SDIO_RESP1);
+    hsd->CID[1] = SDIO_GetResponse(SDIO_RESP2);
+    hsd->CID[2] = SDIO_GetResponse(SDIO_RESP3);
+    hsd->CID[3] = SDIO_GetResponse(SDIO_RESP4);
+  }
+
+  if((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1)    || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+     (hsd->CardType == SECURE_DIGITAL_IO_COMBO_CARD) || (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+  {
+    /* Send CMD3 SET_REL_ADDR with argument 0 */
+    /* SD Card publishes its RCA. */
+    sdio_cmdinitstructure.CmdIndex         = SD_CMD_SET_REL_ADDR;
+    sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+    SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+    /* Check for error conditions */
+    errorstate = SD_CmdResp6Error(hsd, SD_CMD_SET_REL_ADDR, &sd_rca);
+
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+  }
+
+  if (hsd->CardType != SECURE_DIGITAL_IO_CARD)
+  {
+    /* Get the SD card RCA */
+    hsd->RCA = sd_rca;
+
+    /* Send CMD9 SEND_CSD with argument as card's RCA */
+    sdio_cmdinitstructure.Argument         = (uint32_t)(hsd->RCA << 16);
+    sdio_cmdinitstructure.CmdIndex         = SD_CMD_SEND_CSD;
+    sdio_cmdinitstructure.Response         = SDIO_RESPONSE_LONG;
+    SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+    /* Check for error conditions */
+    errorstate = SD_CmdResp2Error(hsd);
+
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+
+    /* Get Card Specific Data */
+    hsd->CSD[0] = SDIO_GetResponse(SDIO_RESP1);
+    hsd->CSD[1] = SDIO_GetResponse(SDIO_RESP2);
+    hsd->CSD[2] = SDIO_GetResponse(SDIO_RESP3);
+    hsd->CSD[3] = SDIO_GetResponse(SDIO_RESP4);
+  }
+
+  /* All cards are initialized */
+  return errorstate;
+}
+
+/**
+  * @brief  Selects of Deselects the corresponding card.
+  * @param  hsd: SD handle
+  * @param  addr: Address of the card to be selected
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr)
+{
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+  /* Send CMD7 SDIO_SEL_DESEL_CARD */
+  sdio_cmdinitstructure.Argument         = (uint32_t)addr;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_SEL_DESEL_CARD;
+  sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+  sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+  sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEL_DESEL_CARD);
+
+  return errorstate;
+}
+
+/**
+  * @brief  Enquires cards about their operating voltage and configures clock
+  *         controls and stores SD information that will be needed in future
+  *         in the SD handle.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd)
+{
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+  __IO HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t response = 0, count = 0, validvoltage = 0;
+  uint32_t sdtype = SD_STD_CAPACITY;
+
+  /* Power ON Sequence -------------------------------------------------------*/
+  /* Disable SDIO Clock */
+  __HAL_SD_SDIO_DISABLE();
+
+  /* Set Power State to ON */
+  SDIO_PowerState_ON(hsd->Instance);
+
+  /* 1ms: required power up waiting time before starting the SD initialization
+     sequence */
+  HAL_Delay(1);
+
+  /* Enable SDIO Clock */
+  __HAL_SD_SDIO_ENABLE();
+
+  /* CMD0: GO_IDLE_STATE -----------------------------------------------------*/
+  /* No CMD response required */
+  sdio_cmdinitstructure.Argument         = 0;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_GO_IDLE_STATE;
+  sdio_cmdinitstructure.Response         = SDIO_RESPONSE_NO;
+  sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+  sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdError(hsd);
+
+  if(errorstate != SD_OK)
+  {
+    /* CMD Response Timeout (wait for CMDSENT flag) */
+    return errorstate;
+  }
+
+  /* CMD8: SEND_IF_COND ------------------------------------------------------*/
+  /* Send CMD8 to verify SD card interface operating condition */
+  /* Argument: - [31:12]: Reserved (shall be set to '0')
+  - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V)
+  - [7:0]: Check Pattern (recommended 0xAA) */
+  /* CMD Response: R7 */
+  sdio_cmdinitstructure.Argument         = SD_CHECK_PATTERN;
+  sdio_cmdinitstructure.CmdIndex         = SD_SDIO_SEND_IF_COND;
+  sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp7Error(hsd);
+
+  if (errorstate == SD_OK)
+  {
+    /* SD Card 2.0 */
+    hsd->CardType = STD_CAPACITY_SD_CARD_V2_0;
+    sdtype        = SD_HIGH_CAPACITY;
+  }
+
+  /* Send CMD55 */
+  sdio_cmdinitstructure.Argument         = 0;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_APP_CMD;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+  /* If errorstate is Command Timeout, it is a MMC card */
+  /* If errorstate is SD_OK it is a SD card: SD card 2.0 (voltage range mismatch)
+     or SD card 1.x */
+  if(errorstate == SD_OK)
+  {
+    /* SD CARD */
+    /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */
+    while((!validvoltage) && (count < SD_MAX_VOLT_TRIAL))
+    {
+
+      /* SEND CMD55 APP_CMD with RCA as 0 */
+      sdio_cmdinitstructure.Argument         = 0;
+      sdio_cmdinitstructure.CmdIndex         = SD_CMD_APP_CMD;
+      sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+      sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+      sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+      SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+      /* Check for error conditions */
+      errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+      if(errorstate != SD_OK)
+      {
+        return errorstate;
+      }
+
+      /* Send CMD41 */
+      sdio_cmdinitstructure.Argument         = SD_VOLTAGE_WINDOW_SD | sdtype;
+      sdio_cmdinitstructure.CmdIndex         = SD_CMD_SD_APP_OP_COND;
+      sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+      sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+      sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+      SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+      /* Check for error conditions */
+      errorstate = SD_CmdResp3Error(hsd);
+
+      if(errorstate != SD_OK)
+      {
+        return errorstate;
+      }
+
+      /* Get command response */
+      response = SDIO_GetResponse(SDIO_RESP1);
+
+      /* Get operating voltage*/
+      validvoltage = (((response >> 31) == 1) ? 1 : 0);
+
+      count++;
+    }
+
+    if(count >= SD_MAX_VOLT_TRIAL)
+    {
+      errorstate = SD_INVALID_VOLTRANGE;
+
+      return errorstate;
+    }
+
+    if((response & SD_HIGH_CAPACITY) == SD_HIGH_CAPACITY) /* (response &= SD_HIGH_CAPACITY) */
+    {
+      hsd->CardType = HIGH_CAPACITY_SD_CARD;
+    }
+
+  } /* else MMC Card */
+
+  return errorstate;
+}
+
+/**
+  * @brief  Turns the SDIO output signals off.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+  /* Set Power State to OFF */
+  SDIO_PowerState_OFF(hsd->Instance);
+
+  return errorstate;
+}
+
+/**
+  * @brief  Returns the current card's status.
+  * @param  hsd: SD handle
+  * @param  pCardStatus: pointer to the buffer that will contain the SD card
+  *         status (Card Status register)
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus)
+{
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+  if(pCardStatus == NULL)
+  {
+    errorstate = SD_INVALID_PARAMETER;
+
+    return errorstate;
+  }
+
+  /* Send Status command */
+  sdio_cmdinitstructure.Argument         = (uint32_t)(hsd->RCA << 16);
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_SEND_STATUS;
+  sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+  sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+  sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEND_STATUS);
+
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Get SD card status */
+  *pCardStatus = SDIO_GetResponse(SDIO_RESP1);
+
+  return errorstate;
+}
+
+/**
+  * @brief  Checks for error conditions for CMD0.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t timeout, tmp;
+
+  timeout = SDIO_CMD0TIMEOUT;
+
+  tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT);
+
+  while((timeout > 0) && (!tmp))
+  {
+    tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT);
+    timeout--;
+  }
+
+  if(timeout == 0)
+  {
+    errorstate = SD_CMD_RSP_TIMEOUT;
+    return errorstate;
+  }
+
+  /* Clear all the static flags */
+  __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+  return errorstate;
+}
+
+/**
+  * @brief  Checks for error conditions for R7 response.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_ERROR;
+  uint32_t timeout = SDIO_CMD0TIMEOUT, tmp;
+
+  tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT);
+
+  while((!tmp) && (timeout > 0))
+  {
+    tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT);
+    timeout--;
+  }
+
+  tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+  if((timeout == 0) || tmp)
+  {
+    /* Card is not V2.0 compliant or card does not support the set voltage range */
+    errorstate = SD_CMD_RSP_TIMEOUT;
+
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+    return errorstate;
+  }
+
+  if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDREND))
+  {
+    /* Card is SD V2.0 compliant */
+    errorstate = SD_OK;
+
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CMDREND);
+
+    return errorstate;
+  }
+
+  return errorstate;
+}
+
+/**
+  * @brief  Checks for error conditions for R1 response.
+  * @param  hsd: SD handle
+  * @param  SD_CMD: The sent command index
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t response_r1;
+
+  while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+  {
+  }
+
+  if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+  {
+    errorstate = SD_CMD_RSP_TIMEOUT;
+
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+    return errorstate;
+  }
+  else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+  {
+    errorstate = SD_CMD_CRC_FAIL;
+
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+    return errorstate;
+  }
+
+  /* Check response received is of desired command */
+  if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD)
+  {
+    errorstate = SD_ILLEGAL_CMD;
+
+    return errorstate;
+  }
+
+  /* Clear all the static flags */
+  __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+  /* We have received response, retrieve it for analysis  */
+  response_r1 = SDIO_GetResponse(SDIO_RESP1);
+
+  if((response_r1 & SD_OCR_ERRORBITS) == SD_ALLZERO)
+  {
+    return errorstate;
+  }
+
+  if((response_r1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE)
+  {
+    return(SD_ADDR_OUT_OF_RANGE);
+  }
+
+  if((response_r1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED)
+  {
+    return(SD_ADDR_MISALIGNED);
+  }
+
+  if((response_r1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR)
+  {
+    return(SD_BLOCK_LEN_ERR);
+  }
+
+  if((response_r1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR)
+  {
+    return(SD_ERASE_SEQ_ERR);
+  }
+
+  if((response_r1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM)
+  {
+    return(SD_BAD_ERASE_PARAM);
+  }
+
+  if((response_r1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION)
+  {
+    return(SD_WRITE_PROT_VIOLATION);
+  }
+
+  if((response_r1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED)
+  {
+    return(SD_LOCK_UNLOCK_FAILED);
+  }
+
+  if((response_r1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED)
+  {
+    return(SD_COM_CRC_FAILED);
+  }
+
+  if((response_r1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD)
+  {
+    return(SD_ILLEGAL_CMD);
+  }
+
+  if((response_r1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED)
+  {
+    return(SD_CARD_ECC_FAILED);
+  }
+
+  if((response_r1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR)
+  {
+    return(SD_CC_ERROR);
+  }
+
+  if((response_r1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR)
+  {
+    return(SD_GENERAL_UNKNOWN_ERROR);
+  }
+
+  if((response_r1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN)
+  {
+    return(SD_STREAM_READ_UNDERRUN);
+  }
+
+  if((response_r1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN)
+  {
+    return(SD_STREAM_WRITE_OVERRUN);
+  }
+
+  if((response_r1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE)
+  {
+    return(SD_CID_CSD_OVERWRITE);
+  }
+
+  if((response_r1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP)
+  {
+    return(SD_WP_ERASE_SKIP);
+  }
+
+  if((response_r1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED)
+  {
+    return(SD_CARD_ECC_DISABLED);
+  }
+
+  if((response_r1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET)
+  {
+    return(SD_ERASE_RESET);
+  }
+
+  if((response_r1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR)
+  {
+    return(SD_AKE_SEQ_ERROR);
+  }
+
+  return errorstate;
+}
+
+/**
+  * @brief  Checks for error conditions for R3 (OCR) response.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+  while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+  {
+  }
+
+  if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+  {
+    errorstate = SD_CMD_RSP_TIMEOUT;
+
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+    return errorstate;
+  }
+
+  /* Clear all the static flags */
+  __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+  return errorstate;
+}
+
+/**
+  * @brief  Checks for error conditions for R2 (CID or CSD) response.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+  while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+  {
+  }
+
+  if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+  {
+    errorstate = SD_CMD_RSP_TIMEOUT;
+
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+    return errorstate;
+  }
+  else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+  {
+    errorstate = SD_CMD_CRC_FAIL;
+
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+    return errorstate;
+  }
+  else
+  {
+    /* No error flag set */
+  }
+
+  /* Clear all the static flags */
+  __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+  return errorstate;
+}
+
+/**
+  * @brief  Checks for error conditions for R6 (RCA) response.
+  * @param  hsd: SD handle
+  * @param  SD_CMD: The sent command index
+  * @param  pRCA: Pointer to the variable that will contain the SD card relative
+  *         address RCA
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t response_r1;
+
+  while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+  {
+  }
+
+  if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+  {
+    errorstate = SD_CMD_RSP_TIMEOUT;
+
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+    return errorstate;
+  }
+  else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+  {
+    errorstate = SD_CMD_CRC_FAIL;
+
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+    return errorstate;
+  }
+  else
+  {
+    /* No error flag set */
+  }
+
+  /* Check response received is of desired command */
+  if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD)
+  {
+    errorstate = SD_ILLEGAL_CMD;
+
+    return errorstate;
+  }
+
+  /* Clear all the static flags */
+  __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+  /* We have received response, retrieve it.  */
+  response_r1 = SDIO_GetResponse(SDIO_RESP1);
+
+  if((response_r1 & (SD_R6_GENERAL_UNKNOWN_ERROR | SD_R6_ILLEGAL_CMD | SD_R6_COM_CRC_FAILED)) == SD_ALLZERO)
+  {
+    *pRCA = (uint16_t) (response_r1 >> 16);
+
+    return errorstate;
+  }
+
+  if((response_r1 & SD_R6_GENERAL_UNKNOWN_ERROR) == SD_R6_GENERAL_UNKNOWN_ERROR)
+  {
+    return(SD_GENERAL_UNKNOWN_ERROR);
+  }
+
+  if((response_r1 & SD_R6_ILLEGAL_CMD) == SD_R6_ILLEGAL_CMD)
+  {
+    return(SD_ILLEGAL_CMD);
+  }
+
+  if((response_r1 & SD_R6_COM_CRC_FAILED) == SD_R6_COM_CRC_FAILED)
+  {
+    return(SD_COM_CRC_FAILED);
+  }
+
+  return errorstate;
+}
+
+/**
+  * @brief  Enables the SDIO wide bus mode.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd)
+{
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+  uint32_t scr[2] = {0, 0};
+
+  if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+  {
+    errorstate = SD_LOCK_UNLOCK_FAILED;
+
+    return errorstate;
+  }
+
+  /* Get SCR Register */
+  errorstate = SD_FindSCR(hsd, scr);
+
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* If requested card supports wide bus operation */
+  if((scr[1] & SD_WIDE_BUS_SUPPORT) != SD_ALLZERO)
+  {
+    /* Send CMD55 APP_CMD with argument as card's RCA.*/
+    sdio_cmdinitstructure.Argument         = (uint32_t)(hsd->RCA << 16);
+    sdio_cmdinitstructure.CmdIndex         = SD_CMD_APP_CMD;
+    sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+    sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+    sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+    SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+
+    /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */
+    sdio_cmdinitstructure.Argument         = 2;
+    sdio_cmdinitstructure.CmdIndex         = SD_CMD_APP_SD_SET_BUSWIDTH;
+    SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH);
+
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+
+    return errorstate;
+  }
+  else
+  {
+    errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+    return errorstate;
+  }
+}
+
+/**
+  * @brief  Disables the SDIO wide bus mode.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd)
+{
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+  uint32_t scr[2] = {0, 0};
+
+  if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+  {
+    errorstate = SD_LOCK_UNLOCK_FAILED;
+
+    return errorstate;
+  }
+
+  /* Get SCR Register */
+  errorstate = SD_FindSCR(hsd, scr);
+
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* If requested card supports 1 bit mode operation */
+  if((scr[1] & SD_SINGLE_BUS_SUPPORT) != SD_ALLZERO)
+  {
+    /* Send CMD55 APP_CMD with argument as card's RCA */
+    sdio_cmdinitstructure.Argument         = (uint32_t)(hsd->RCA << 16);
+    sdio_cmdinitstructure.CmdIndex         = SD_CMD_APP_CMD;
+    sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+    sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+    sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+    SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+
+    /* Send ACMD6 APP_CMD with argument as 0 for single bus mode */
+    sdio_cmdinitstructure.Argument         = 0;
+    sdio_cmdinitstructure.CmdIndex         = SD_CMD_APP_SD_SET_BUSWIDTH;
+    SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH);
+
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+
+    return errorstate;
+  }
+  else
+  {
+    errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+    return errorstate;
+  }
+}
+
+
+/**
+  * @brief  Finds the SD card SCR register value.
+  * @param  hsd: SD handle
+  * @param  pSCR: pointer to the buffer that will contain the SCR value
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR)
+{
+  SDIO_CmdInitTypeDef  sdio_cmdinitstructure;
+  SDIO_DataInitTypeDef sdio_datainitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t index = 0;
+  uint32_t tempscr[2] = {0, 0};
+
+  /* Set Block Size To 8 Bytes */
+  /* Send CMD55 APP_CMD with argument as card's RCA */
+  sdio_cmdinitstructure.Argument         = (uint32_t)8;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+  sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+  sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+  sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+
+  /* Send CMD55 APP_CMD with argument as card's RCA */
+  sdio_cmdinitstructure.Argument         = (uint32_t)((hsd->RCA) << 16);
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_APP_CMD;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  sdio_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+  sdio_datainitstructure.DataLength    = 8;
+  sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_8B;
+  sdio_datainitstructure.TransferDir   = SDIO_TRANSFER_DIR_TO_SDIO;
+  sdio_datainitstructure.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
+  sdio_datainitstructure.DPSM          = SDIO_DPSM_ENABLE;
+  SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+  /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */
+  sdio_cmdinitstructure.Argument         = 0;
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_SD_APP_SEND_SCR;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_SEND_SCR);
+
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+#ifdef SDIO_STA_STBITERR
+  while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+  while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+  {
+    if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL))
+    {
+      *(tempscr + index) = SDIO_ReadFIFO(hsd->Instance);
+      index++;
+    }
+  }
+
+  if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+    errorstate = SD_DATA_TIMEOUT;
+
+    return errorstate;
+  }
+  else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+    errorstate = SD_DATA_CRC_FAIL;
+
+    return errorstate;
+  }
+  else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+    errorstate = SD_RX_OVERRUN;
+
+    return errorstate;
+  }
+#ifdef SDIO_STA_STBITERR
+  else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+  {
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+    errorstate = SD_START_BIT_ERR;
+
+    return errorstate;
+  }
+#endif /* SDIO_STA_STBITERR */
+  else
+  {
+    /* No error flag set */
+  }
+
+  /* Clear all the static flags */
+  __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+  *(pSCR + 1) = ((tempscr[0] & SD_0TO7BITS) << 24)  | ((tempscr[0] & SD_8TO15BITS) << 8) |\
+    ((tempscr[0] & SD_16TO23BITS) >> 8) | ((tempscr[0] & SD_24TO31BITS) >> 24);
+
+  *(pSCR) = ((tempscr[1] & SD_0TO7BITS) << 24)  | ((tempscr[1] & SD_8TO15BITS) << 8) |\
+    ((tempscr[1] & SD_16TO23BITS) >> 8) | ((tempscr[1] & SD_24TO31BITS) >> 24);
+
+  return errorstate;
+}
+
+/**
+  * @brief  Checks if the SD card is in programming state.
+  * @param  hsd: SD handle
+  * @param  pStatus: pointer to the variable that will contain the SD card state
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus)
+{
+  SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  __IO uint32_t responseR1 = 0;
+
+  sdio_cmdinitstructure.Argument         = (uint32_t)(hsd->RCA << 16);
+  sdio_cmdinitstructure.CmdIndex         = SD_CMD_SEND_STATUS;
+  sdio_cmdinitstructure.Response         = SDIO_RESPONSE_SHORT;
+  sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+  sdio_cmdinitstructure.CPSM             = SDIO_CPSM_ENABLE;
+  SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+  while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+  {
+  }
+
+  if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+  {
+    errorstate = SD_CMD_RSP_TIMEOUT;
+
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+    return errorstate;
+  }
+  else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+  {
+    errorstate = SD_CMD_CRC_FAIL;
+
+    __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+    return errorstate;
+  }
+  else
+  {
+    /* No error flag set */
+  }
+
+  /* Check response received is of desired command */
+  if((uint32_t)SDIO_GetCommandResponse(hsd->Instance) != SD_CMD_SEND_STATUS)
+  {
+    errorstate = SD_ILLEGAL_CMD;
+
+    return errorstate;
+  }
+
+  /* Clear all the static flags */
+  __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+
+  /* We have received response, retrieve it for analysis */
+  responseR1 = SDIO_GetResponse(SDIO_RESP1);
+
+  /* Find out card status */
+  *pStatus = (uint8_t)((responseR1 >> 9) & 0x0000000F);
+
+  if((responseR1 & SD_OCR_ERRORBITS) == SD_ALLZERO)
+  {
+    return errorstate;
+  }
+
+  if((responseR1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE)
+  {
+    return(SD_ADDR_OUT_OF_RANGE);
+  }
+
+  if((responseR1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED)
+  {
+    return(SD_ADDR_MISALIGNED);
+  }
+
+  if((responseR1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR)
+  {
+    return(SD_BLOCK_LEN_ERR);
+  }
+
+  if((responseR1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR)
+  {
+    return(SD_ERASE_SEQ_ERR);
+  }
+
+  if((responseR1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM)
+  {
+    return(SD_BAD_ERASE_PARAM);
+  }
+
+  if((responseR1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION)
+  {
+    return(SD_WRITE_PROT_VIOLATION);
+  }
+
+  if((responseR1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED)
+  {
+    return(SD_LOCK_UNLOCK_FAILED);
+  }
+
+  if((responseR1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED)
+  {
+    return(SD_COM_CRC_FAILED);
+  }
+
+  if((responseR1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD)
+  {
+    return(SD_ILLEGAL_CMD);
+  }
+
+  if((responseR1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED)
+  {
+    return(SD_CARD_ECC_FAILED);
+  }
+
+  if((responseR1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR)
+  {
+    return(SD_CC_ERROR);
+  }
+
+  if((responseR1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR)
+  {
+    return(SD_GENERAL_UNKNOWN_ERROR);
+  }
+
+  if((responseR1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN)
+  {
+    return(SD_STREAM_READ_UNDERRUN);
+  }
+
+  if((responseR1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN)
+  {
+    return(SD_STREAM_WRITE_OVERRUN);
+  }
+
+  if((responseR1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE)
+  {
+    return(SD_CID_CSD_OVERWRITE);
+  }
+
+  if((responseR1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP)
+  {
+    return(SD_WP_ERASE_SKIP);
+  }
+
+  if((responseR1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED)
+  {
+    return(SD_CARD_ECC_DISABLED);
+  }
+
+  if((responseR1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET)
+  {
+    return(SD_ERASE_RESET);
+  }
+
+  if((responseR1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR)
+  {
+    return(SD_AKE_SEQ_ERROR);
+  }
+
+  return errorstate;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_SD_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c
new file mode 100644
index 0000000..375293e
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c
@@ -0,0 +1,842 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_sdram.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   SDRAM HAL module driver.
+  *          This file provides a generic firmware to drive SDRAM memories mounted
+  *          as external device.
+  *
+  @verbatim
+  ==============================================================================
+                       ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    This driver is a generic layered driver which contains a set of APIs used to
+    control SDRAM memories. It uses the FMC layer functions to interface
+    with SDRAM devices.
+    The following sequence should be followed to configure the FMC to interface
+    with SDRAM memories:
+
+   (#) Declare a SDRAM_HandleTypeDef handle structure, for example:
+          SDRAM_HandleTypeDef  hdsram
+
+       (++) Fill the SDRAM_HandleTypeDef handle "Init" field with the allowed
+            values of the structure member.
+
+       (++) Fill the SDRAM_HandleTypeDef handle "Instance" field with a predefined
+            base register instance for NOR or SDRAM device
+
+   (#) Declare a FMC_SDRAM_TimingTypeDef structure; for example:
+          FMC_SDRAM_TimingTypeDef  Timing;
+      and fill its fields with the allowed values of the structure member.
+
+   (#) Initialize the SDRAM Controller by calling the function HAL_SDRAM_Init(). This function
+       performs the following sequence:
+
+       (##) MSP hardware layer configuration using the function HAL_SDRAM_MspInit()
+       (##) Control register configuration using the FMC SDRAM interface function
+            FMC_SDRAM_Init()
+       (##) Timing register configuration using the FMC SDRAM interface function
+            FMC_SDRAM_Timing_Init()
+       (##) Program the SDRAM external device by applying its initialization sequence
+            according to the device plugged in your hardware. This step is mandatory
+            for accessing the SDRAM device.
+
+   (#) At this stage you can perform read/write accesses from/to the memory connected
+       to the SDRAM Bank. You can perform either polling or DMA transfer using the
+       following APIs:
+       (++) HAL_SDRAM_Read()/HAL_SDRAM_Write() for polling read/write access
+       (++) HAL_SDRAM_Read_DMA()/HAL_SDRAM_Write_DMA() for DMA read/write transfer
+
+   (#) You can also control the SDRAM device by calling the control APIs HAL_SDRAM_WriteOperation_Enable()/
+       HAL_SDRAM_WriteOperation_Disable() to respectively enable/disable the SDRAM write operation or
+       the function HAL_SDRAM_SendCommand() to send a specified command to the SDRAM
+       device. The command to be sent must be configured with the FMC_SDRAM_CommandTypeDef
+       structure.
+
+   (#) You can continuously monitor the SDRAM device HAL state by calling the function
+       HAL_SDRAM_GetState()
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SDRAM SDRAM
+  * @brief SDRAM driver modules
+  * @{
+  */
+#ifdef HAL_SDRAM_MODULE_ENABLED
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SDRAM_Exported_Functions SDRAM Exported Functions
+  * @{
+  */
+
+/** @defgroup SDRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief    Initialization and Configuration functions
+  *
+  @verbatim
+  ==============================================================================
+           ##### SDRAM Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to initialize/de-initialize
+    the SDRAM memory
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Performs the SDRAM device initialization sequence.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  Timing: Pointer to SDRAM control timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing)
+{
+  /* Check the SDRAM handle parameter */
+  if(hsdram == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  if(hsdram->State == HAL_SDRAM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hsdram->Lock = HAL_UNLOCKED;
+    /* Initialize the low level hardware (MSP) */
+    HAL_SDRAM_MspInit(hsdram);
+  }
+
+  /* Initialize the SDRAM controller state */
+  hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+  /* Initialize SDRAM control Interface */
+  FMC_SDRAM_Init(hsdram->Instance, &(hsdram->Init));
+
+  /* Initialize SDRAM timing Interface */
+  FMC_SDRAM_Timing_Init(hsdram->Instance, Timing, hsdram->Init.SDBank);
+
+  /* Update the SDRAM controller state */
+  hsdram->State = HAL_SDRAM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Perform the SDRAM device initialization sequence.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram)
+{
+  /* Initialize the low level hardware (MSP) */
+  HAL_SDRAM_MspDeInit(hsdram);
+
+  /* Configure the SDRAM registers with their reset values */
+  FMC_SDRAM_DeInit(hsdram->Instance, hsdram->Init.SDBank);
+
+  /* Reset the SDRAM controller state */
+  hsdram->State = HAL_SDRAM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hsdram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  SDRAM MSP Init.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval None
+  */
+__weak void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+            the HAL_SDRAM_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  SDRAM MSP DeInit.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval None
+  */
+__weak void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+            the HAL_SDRAM_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  This function handles SDRAM refresh error interrupt request.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval HAL status
+*/
+void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram)
+{
+  /* Check SDRAM interrupt Rising edge flag */
+  if(__FMC_SDRAM_GET_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_IT))
+  {
+    /* SDRAM refresh error interrupt callback */
+    HAL_SDRAM_RefreshErrorCallback(hsdram);
+
+    /* Clear SDRAM refresh error interrupt pending bit */
+    __FMC_SDRAM_CLEAR_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_ERROR);
+  }
+}
+
+/**
+  * @brief  SDRAM Refresh error callback.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval None
+  */
+__weak void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+            the HAL_SDRAM_RefreshErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DMA transfer complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+__weak void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+            the HAL_SDRAM_DMA_XferCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DMA transfer complete error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+__weak void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+            the HAL_SDRAM_DMA_XferErrorCallback could be implemented in the user file
+   */
+}
+/**
+  * @}
+  */
+
+/** @defgroup SDRAM_Exported_Functions_Group2 Input and Output functions
+  * @brief    Input Output and memory control functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### SDRAM Input and Output functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to use and control the SDRAM memory
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Reads 8-bit data buffer from the SDRAM memory.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize)
+{
+  __IO uint8_t *pSdramAddress = (uint8_t *)pAddress;
+
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Read data from source */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *pDstBuffer = *(__IO uint8_t *)pSdramAddress;
+    pDstBuffer++;
+    pSdramAddress++;
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Writes 8-bit data buffer to SDRAM memory.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize)
+{
+  __IO uint8_t *pSdramAddress = (uint8_t *)pAddress;
+  uint32_t tmp = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+
+  /* Check the SDRAM controller state */
+  tmp = hsdram->State;
+
+  if(tmp == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Write data to memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *(__IO uint8_t *)pSdramAddress = *pSrcBuffer;
+    pSrcBuffer++;
+    pSdramAddress++;
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reads 16-bit data buffer from the SDRAM memory.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize)
+{
+  __IO uint16_t *pSdramAddress = (uint16_t *)pAddress;
+
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Read data from source */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *pDstBuffer = *(__IO uint16_t *)pSdramAddress;
+    pDstBuffer++;
+    pSdramAddress++;
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Writes 16-bit data buffer to SDRAM memory.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize)
+{
+  __IO uint16_t *pSdramAddress = (uint16_t *)pAddress;
+  uint32_t tmp = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+
+  /* Check the SDRAM controller state */
+  tmp = hsdram->State;
+
+  if(tmp == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Write data to memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *(__IO uint16_t *)pSdramAddress = *pSrcBuffer;
+    pSrcBuffer++;
+    pSdramAddress++;
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reads 32-bit data buffer from the SDRAM memory.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+  __IO uint32_t *pSdramAddress = (uint32_t *)pAddress;
+
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Read data from source */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *pDstBuffer = *(__IO uint32_t *)pSdramAddress;
+    pDstBuffer++;
+    pSdramAddress++;
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Writes 32-bit data buffer to SDRAM memory.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+  __IO uint32_t *pSdramAddress = (uint32_t *)pAddress;
+  uint32_t tmp = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+
+  /* Check the SDRAM controller state */
+  tmp = hsdram->State;
+
+  if(tmp == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Write data to memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *(__IO uint32_t *)pSdramAddress = *pSrcBuffer;
+    pSrcBuffer++;
+    pSdramAddress++;
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reads a Words data from the SDRAM memory using DMA transfer.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+  uint32_t tmp = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+
+  /* Check the SDRAM controller state */
+  tmp = hsdram->State;
+
+  if(tmp == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if(tmp == HAL_SDRAM_STATE_PRECHARGED)
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Configure DMA user callbacks */
+  hsdram->hdma->XferCpltCallback  = HAL_SDRAM_DMA_XferCpltCallback;
+  hsdram->hdma->XferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback;
+
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Writes a Words data buffer to SDRAM memory using DMA transfer.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+  uint32_t tmp = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+
+  /* Check the SDRAM controller state */
+  tmp = hsdram->State;
+
+  if(tmp == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Configure DMA user callbacks */
+  hsdram->hdma->XferCpltCallback  = HAL_SDRAM_DMA_XferCpltCallback;
+  hsdram->hdma->XferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback;
+
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);
+
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup SDRAM_Exported_Functions_Group3 Control functions
+ *  @brief   management functions
+ *
+ at verbatim
+  ==============================================================================
+                         ##### SDRAM Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the SDRAM interface.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables dynamically SDRAM write protection.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram)
+{
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+  /* Enable write protection */
+  FMC_SDRAM_WriteProtection_Enable(hsdram->Instance, hsdram->Init.SDBank);
+
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically SDRAM write protection.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram)
+{
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+  /* Disable write protection */
+  FMC_SDRAM_WriteProtection_Disable(hsdram->Instance, hsdram->Init.SDBank);
+
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sends Command to the SDRAM bank.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  Command: SDRAM command structure
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout)
+{
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+  /* Send SDRAM command */
+  FMC_SDRAM_SendCommand(hsdram->Instance, Command, Timeout);
+
+  /* Update the SDRAM controller state */
+  if(Command->CommandMode == FMC_SDRAM_CMD_PALL)
+  {
+    hsdram->State = HAL_SDRAM_STATE_PRECHARGED;
+  }
+  else
+  {
+    hsdram->State = HAL_SDRAM_STATE_READY;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Programs the SDRAM Memory Refresh rate.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  RefreshRate: The SDRAM refresh rate value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate)
+{
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+  /* Program the refresh rate */
+  FMC_SDRAM_ProgramRefreshRate(hsdram->Instance ,RefreshRate);
+
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets the Number of consecutive SDRAM Memory auto Refresh commands.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  AutoRefreshNumber: The SDRAM auto Refresh number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber)
+{
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_BUSY;
+
+  /* Set the Auto-Refresh number */
+  FMC_SDRAM_SetAutoRefreshNumber(hsdram->Instance ,AutoRefreshNumber);
+
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the SDRAM memory current mode.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval The SDRAM memory mode.
+  */
+uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram)
+{
+  /* Return the SDRAM memory current mode */
+  return(FMC_SDRAM_GetModeStatus(hsdram->Instance, hsdram->Init.SDBank));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SDRAM_Exported_Functions_Group4 State functions
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### SDRAM State functions #####
+  ==============================================================================
+  [..]
+    This subsection permits to get in run-time the status of the SDRAM controller
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the SDRAM state.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval HAL state
+  */
+HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram)
+{
+  return hsdram->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c
new file mode 100644
index 0000000..094a060
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c
@@ -0,0 +1,1303 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_smartcard.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   SMARTCARD HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the SMARTCARD peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State and Errors functions
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The SMARTCARD HAL driver can be used as follows:
+
+    (#) Declare a SMARTCARD_HandleTypeDef handle structure.
+    (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API:
+        (##) Enable the USARTx interface clock.
+        (##) SMARTCARD pins configuration:
+            (+++) Enable the clock for the SMARTCARD GPIOs.
+            (+++) Configure these SMARTCARD pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT()
+             and HAL_SMARTCARD_Receive_IT() APIs):
+            (+++) Configure the USARTx interrupt priority.
+            (+++) Enable the NVIC USART IRQ handle.
+        (##) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA()
+             and HAL_SMARTCARD_Receive_DMA() APIs):
+            (+++) Declare a DMA handle structure for the Tx/Rx stream.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+            (+++) Configure the DMA Tx/Rx Stream.
+            (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
+
+    (#) Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware
+        flow control and Mode(Receiver/Transmitter) in the SMARTCARD Init structure.
+
+    (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API:
+        (++) These APIs configure also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+             by calling the customized HAL_SMARTCARD_MspInit() API.
+    [..]
+    (@) The specific SMARTCARD interrupts (Transmission complete interrupt,
+        RXNE interrupt and Error Interrupts) will be managed using the macros
+        __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.
+
+    [..]
+    Three operation modes are available within this driver :
+
+    *** Polling mode IO operation ***
+    =================================
+    [..]
+      (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit()
+      (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive()
+
+    *** Interrupt mode IO operation ***
+    ===================================
+    [..]
+      (+) Send an amount of data in non blocking mode using HAL_SMARTCARD_Transmit_IT()
+      (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can
+          add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
+      (+) Receive an amount of data in non blocking mode using HAL_SMARTCARD_Receive_IT()
+      (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can
+          add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
+      (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
+          add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback
+
+    *** DMA mode IO operation ***
+    ==============================
+    [..]
+      (+) Send an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA()
+      (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can
+          add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
+      (+) Receive an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA()
+      (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can
+          add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
+      (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
+          add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback
+
+    *** SMARTCARD HAL driver macros list ***
+    =============================================
+    [..]
+      Below the list of most used macros in SMARTCARD HAL driver.
+
+      (+) __HAL_SMARTCARD_ENABLE: Enable the SMARTCARD peripheral
+      (+) __HAL_SMARTCARD_DISABLE: Disable the SMARTCARD peripheral
+      (+) __HAL_SMARTCARD_GET_FLAG : Check whether the specified SMARTCARD flag is set or not
+      (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag
+      (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt
+      (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt
+
+    [..]
+      (@) You can refer to the SMARTCARD HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SMARTCARD SMARTCARD
+  * @brief HAL USART SMARTCARD module driver
+  * @{
+  */
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup SMARTCARD_Private_Constants
+  * @{
+  */
+#define SMARTCARD_TIMEOUT_VALUE  22000
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SMARTCARD_Private_Functions
+  * @{
+  */
+static void SMARTCARD_SetConfig (SMARTCARD_HandleTypeDef *hsc);
+static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc);
+static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
+static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc);
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
+  * @{
+  */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group1 SmartCard Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+ at verbatim
+  ==============================================================================
+              ##### Initialization and Configuration functions #####
+  ==============================================================================
+  [..]
+  This subsection provides a set of functions allowing to initialize the USART
+  in Smartcard mode.
+  [..]
+  The Smartcard interface is designed to support asynchronous protocol Smartcards as
+  defined in the ISO 7816-3 standard.
+  [..]
+  The USART can provide a clock to the smartcard through the SCLK output.
+  In smartcard mode, SCLK is not associated to the communication but is simply derived
+  from the internal peripheral input clock through a 5-bit prescaler.
+  [..]
+  (+) For the Smartcard mode only these parameters can be configured:
+      (++) Baud Rate
+      (++) Word Length => Should be 9 bits (8 bits + parity)
+      (++) Stop Bit
+      (++) Parity: => Should be enabled
+   +-------------------------------------------------------------+
+   |   M bit |  PCE bit  |        SMARTCARD frame                |
+   |---------------------|---------------------------------------|
+   |    1    |    1      |    | SB | 8 bit data | PB | STB |     |
+   +-------------------------------------------------------------+
+      (++) USART polarity
+      (++) USART phase
+      (++) USART LastBit
+      (++) Receiver/transmitter modes
+      (++) Prescaler
+      (++) GuardTime
+      (++) NACKState: The Smartcard NACK state
+
+     (+) Recommended SmartCard interface configuration to get the Answer to Reset from the Card:
+        (++) Word Length = 9 Bits
+        (++) 1.5 Stop Bit
+        (++) Even parity
+        (++) BaudRate = 12096 baud
+        (++) Tx and Rx enabled
+  [..]
+  Please refer to the ISO 7816-3 specification for more details.
+
+    - at - It is also possible to choose 0.5 stop bit for receiving but it is recommended
+        to use 1.5 stop bits for both transmitting and receiving to avoid switching
+        between the two configurations.
+  [..]
+    The HAL_SMARTCARD_Init() function follows the USART  SmartCard configuration
+    procedure (details for the procedure are available in reference manual (RM0329)).
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief Initializes the SmartCard mode according to the specified
+  *         parameters in the SMARTCARD_InitTypeDef and create the associated handle .
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* Check the SMARTCARD handle allocation */
+  if(hsc == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
+  assert_param(IS_SMARTCARD_NACK_STATE(hsc->Init.NACKState));
+
+  if(hsc->State == HAL_SMARTCARD_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hsc->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+    HAL_SMARTCARD_MspInit(hsc);
+  }
+
+  hsc->State = HAL_SMARTCARD_STATE_BUSY;
+
+  /* Set the Prescaler */
+  MODIFY_REG(hsc->Instance->GTPR, USART_GTPR_PSC, hsc->Init.Prescaler);
+
+  /* Set the Guard Time */
+  MODIFY_REG(hsc->Instance->GTPR, USART_GTPR_GT, ((hsc->Init.GuardTime)<<8));
+
+  /* Set the Smartcard Communication parameters */
+  SMARTCARD_SetConfig(hsc);
+
+  /* In SmartCard mode, the following bits must be kept cleared:
+  - LINEN bit in the USART_CR2 register
+  - HDSEL and IREN bits in the USART_CR3 register.*/
+  hsc->Instance->CR2 &= ~USART_CR2_LINEN;
+  hsc->Instance->CR3 &= ~(USART_CR3_IREN | USART_CR3_HDSEL);
+
+  /* Enable the SMARTCARD Parity Error Interrupt */
+  __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_PE);
+
+  /* Enable the SMARTCARD Framing Error Interrupt */
+  __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_ERR);
+
+  /* Enable the Peripheral */
+  __HAL_SMARTCARD_ENABLE(hsc);
+
+  /* Configure the Smartcard NACK state */
+  MODIFY_REG(hsc->Instance->CR3, USART_CR3_NACK, hsc->Init.NACKState);
+
+  /* Enable the SC mode by setting the SCEN bit in the CR3 register */
+  hsc->Instance->CR3 |= (USART_CR3_SCEN);
+
+  /* Initialize the SMARTCARD state*/
+  hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+  hsc->State= HAL_SMARTCARD_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief DeInitializes the USART SmartCard peripheral
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* Check the SMARTCARD handle allocation */
+  if(hsc == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
+
+  hsc->State = HAL_SMARTCARD_STATE_BUSY;
+
+  /* Disable the Peripheral */
+  __HAL_SMARTCARD_DISABLE(hsc);
+
+  /* DeInit the low level hardware */
+  HAL_SMARTCARD_MspDeInit(hsc);
+
+  hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+  hsc->State = HAL_SMARTCARD_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hsc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief SMARTCARD MSP Init
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @retval None
+  */
+ __weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief SMARTCARD MSP DeInit
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @retval None
+  */
+ __weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions
+  *  @brief   SMARTCARD Transmit and Receive functions
+  *
+ at verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    This subsection provides a set of functions allowing to manage the SMARTCARD data transfers.
+    [..]
+    Smartcard is a single wire half duplex communication protocol.
+    The Smartcard interface is designed to support asynchronous protocol Smartcards as
+    defined in the ISO 7816-3 standard. The USART should be configured as:
+    (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register
+    (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register.
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode: The communication is performed in polling mode.
+            The HAL status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) Non Blocking mode: The communication is performed using Interrupts
+           or DMA, These APIs return the HAL status.
+           The end of the data processing will be indicated through the
+           dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when
+           using DMA mode.
+           The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks
+           will be executed respectively at the end of the Transmit or Receive process
+           The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication error is detected
+
+    (#) Blocking mode APIs are :
+        (++) HAL_SMARTCARD_Transmit()
+        (++) HAL_SMARTCARD_Receive()
+
+    (#) Non Blocking mode APIs with Interrupt are :
+        (++) HAL_SMARTCARD_Transmit_IT()
+        (++) HAL_SMARTCARD_Receive_IT()
+        (++) HAL_SMARTCARD_IRQHandler()
+
+    (#) Non Blocking mode functions with DMA are :
+        (++) HAL_SMARTCARD_Transmit_DMA()
+        (++) HAL_SMARTCARD_Receive_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_SMARTCARD_TxCpltCallback()
+        (++) HAL_SMARTCARD_RxCpltCallback()
+        (++) HAL_SMARTCARD_ErrorCallback()
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief Send an amount of data in blocking mode
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be sent
+  * @param Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = hsc->State;
+  if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_RX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsc);
+
+    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    /* Check if a non-blocking receive process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX)
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
+    }
+
+    hsc->TxXferSize = Size;
+    hsc->TxXferCount = Size;
+    while(hsc->TxXferCount > 0)
+    {
+      hsc->TxXferCount--;
+      if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TXE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      tmp = (uint16_t*) pData;
+      hsc->Instance->DR = (*tmp & (uint16_t)0x01FF);
+      pData +=1;
+    }
+
+    if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TC, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Check if a non-blocking receive process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_READY;
+    }
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsc);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in blocking mode
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be received
+  * @param Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = hsc->State;
+  if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsc);
+
+    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+
+    /* Check if a non-blocking transmit process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX)
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
+    }
+
+    hsc->RxXferSize = Size;
+    hsc->RxXferCount = Size;
+
+    /* Check the remain data to be received */
+    while(hsc->RxXferCount > 0)
+    {
+      hsc->RxXferCount--;
+      if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      tmp = (uint16_t*) pData;
+      *tmp = (uint16_t)(hsc->Instance->DR & (uint16_t)0x00FF);
+      pData +=1;
+    }
+
+    /* Check if a non-blocking transmit process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_READY;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsc);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Send an amount of data in non blocking mode
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+  uint32_t tmp1 = 0;
+
+  tmp1 = hsc->State;
+  if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_RX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsc);
+
+    hsc->pTxBuffPtr = pData;
+    hsc->TxXferSize = Size;
+    hsc->TxXferCount = Size;
+
+    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    /* Check if a non-blocking receive process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX)
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsc);
+
+    /* Enable the SMARTCARD Parity Error Interrupt */
+    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_PE);
+
+    /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR);
+
+    /* Enable the SMARTCARD Transmit data register empty Interrupt */
+    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TXE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in non blocking mode
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+  uint32_t tmp1 = 0;
+
+  tmp1 = hsc->State;
+  if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsc);
+
+    hsc->pRxBuffPtr = pData;
+    hsc->RxXferSize = Size;
+    hsc->RxXferCount = Size;
+
+    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    /* Check if a non-blocking transmit process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX)
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
+    }
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsc);
+
+    /* Enable the SMARTCARD Data Register not empty Interrupt */
+    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_RXNE);
+
+    /* Enable the SMARTCARD Parity Error Interrupt */
+    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_PE);
+
+    /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_ERR);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Send an amount of data in non blocking mode
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = hsc->State;
+  if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_RX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsc);
+
+    hsc->pTxBuffPtr = pData;
+    hsc->TxXferSize = Size;
+    hsc->TxXferCount = Size;
+
+    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    /* Check if a non-blocking receive process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX)
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
+    }
+
+    /* Set the SMARTCARD DMA transfer complete callback */
+    hsc->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt;
+
+    /* Set the DMA error callback */
+    hsc->hdmatx->XferErrorCallback = SMARTCARD_DMAError;
+
+    /* Enable the SMARTCARD transmit DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hsc->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsc->Instance->DR, Size);
+
+     /* Clear the TC flag in the SR register by writing 0 to it */
+    __HAL_SMARTCARD_CLEAR_FLAG(hsc, SMARTCARD_FLAG_TC);
+
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+    in the SMARTCARD CR3 register */
+    hsc->Instance->CR3 |= USART_CR3_DMAT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsc);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in non blocking mode
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be received
+  * @note   When the SMARTCARD parity is enabled (PCE = 1) the data received contain the parity bit.s
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = hsc->State;
+  if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsc);
+
+    hsc->pRxBuffPtr = pData;
+    hsc->RxXferSize = Size;
+
+    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    /* Check if a non-blocking transmit process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX)
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
+    }
+
+    /* Set the SMARTCARD DMA transfer complete callback */
+    hsc->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt;
+
+    /* Set the DMA error callback */
+    hsc->hdmarx->XferErrorCallback = SMARTCARD_DMAError;
+
+    /* Enable the DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hsc->hdmarx, (uint32_t)&hsc->Instance->DR, *(uint32_t*)tmp, Size);
+
+    /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+    in the SMARTCARD CR3 register */
+    hsc->Instance->CR3 |= USART_CR3_DMAR;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsc);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief This function handles SMARTCARD interrupt request.
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @retval None
+  */
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  tmp1 = hsc->Instance->SR;
+  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_PE);
+
+  /* SMARTCARD parity error interrupt occurred --------------------------------*/
+  if(((tmp1 & SMARTCARD_FLAG_PE) != RESET) && (tmp2 != RESET))
+  {
+    __HAL_SMARTCARD_CLEAR_PEFLAG(hsc);
+    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_PE;
+  }
+
+  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR);
+  /* SMARTCARD frame error interrupt occurred ---------------------------------*/
+  if(((tmp1 & SMARTCARD_FLAG_FE) != RESET) && (tmp2 != RESET))
+  {
+    __HAL_SMARTCARD_CLEAR_FEFLAG(hsc);
+    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_FE;
+  }
+
+  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR);
+  /* SMARTCARD noise error interrupt occurred ---------------------------------*/
+  if(((tmp1 & SMARTCARD_FLAG_NE) != RESET) && (tmp2 != RESET))
+  {
+    __HAL_SMARTCARD_CLEAR_NEFLAG(hsc);
+    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_NE;
+  }
+
+  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR);
+  /* SMARTCARD Over-Run interrupt occurred ------------------------------------*/
+  if(((tmp1 & SMARTCARD_FLAG_ORE) != RESET) && (tmp2 != RESET))
+  {
+    __HAL_SMARTCARD_CLEAR_OREFLAG(hsc);
+    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_ORE;
+  }
+
+  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_RXNE);
+  /* SMARTCARD in mode Receiver ----------------------------------------------*/
+  if(((tmp1 & SMARTCARD_FLAG_RXNE) != RESET) && (tmp2 != RESET))
+  {
+    SMARTCARD_Receive_IT(hsc);
+  }
+
+  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_TXE);
+  /* SMARTCARD in mode Transmitter -------------------------------------------*/
+  if(((tmp1 & SMARTCARD_FLAG_TXE) != RESET) && (tmp2 != RESET))
+  {
+    SMARTCARD_Transmit_IT(hsc);
+  }
+
+  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_TC);
+  /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/
+  if(((tmp1 & SMARTCARD_FLAG_TC) != RESET) && (tmp2 != RESET))
+  {
+    SMARTCARD_EndTransmit_IT(hsc);
+  }
+
+  /* Call the Error call Back in case of Errors */
+  if(hsc->ErrorCode != HAL_SMARTCARD_ERROR_NONE)
+  {
+    /* Set the SMARTCARD state ready to be able to start again the process */
+    hsc->State= HAL_SMARTCARD_STATE_READY;
+    HAL_SMARTCARD_ErrorCallback(hsc);
+  }
+}
+
+/**
+  * @brief Tx Transfer completed callbacks
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @retval None
+  */
+ __weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer completed callbacks
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @retval None
+  */
+__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief SMARTCARD error callbacks
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @retval None
+  */
+ __weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions
+  *  @brief   SMARTCARD State and Errors functions
+  *
+ at verbatim
+ ===============================================================================
+                ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the SmartCard.
+     (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state of the SmartCard peripheral.
+     (+) HAL_SMARTCARD_GetError() check in run-time errors that could be occurred during communication.
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief return the SMARTCARD state
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @retval HAL state
+  */
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc)
+{
+  return hsc->State;
+}
+
+/**
+  * @brief  Return the SMARTCARD error code
+  * @param  hsc : pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *              the configuration information for the specified SMARTCARD.
+  * @retval SMARTCARD Error Code
+  */
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc)
+{
+  return hsc->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief DMA SMARTCARD transmit process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  hsc->TxXferCount = 0;
+
+  /* Disable the DMA transfer for transmit request by setting the DMAT bit
+  in the USART CR3 register */
+  hsc->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);
+
+  /* Enable the SMARTCARD Transmit Complete Interrupt */
+  __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TC);
+}
+
+/**
+  * @brief DMA SMARTCARD receive process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  hsc->RxXferCount = 0;
+
+  /* Disable the DMA transfer for the receiver request by setting the DMAR bit
+  in the USART CR3 register */
+  hsc->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAR);
+
+  /* Check if a non-blocking transmit process is ongoing or not */
+  if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
+  {
+    hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
+  }
+  else
+  {
+    hsc->State = HAL_SMARTCARD_STATE_READY;
+  }
+
+  HAL_SMARTCARD_RxCpltCallback(hsc);
+}
+
+/**
+  * @brief DMA SMARTCARD communication error callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma)
+{
+  SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  hsc->RxXferCount = 0;
+  hsc->TxXferCount = 0;
+  hsc->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
+  hsc->State= HAL_SMARTCARD_STATE_READY;
+
+  HAL_SMARTCARD_ErrorCallback(hsc);
+}
+
+/**
+  * @brief  This function handles SMARTCARD Communication Timeout.
+  * @param  hsc: SMARTCARD handle
+  * @param  Flag: specifies the SMARTCARD flag to check.
+  * @param  Status: The new Flag status (SET or RESET).
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_SMARTCARD_GET_FLAG(hsc, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE and RXNE interrupts for the interrupt process */
+          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE);
+          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE);
+
+          hsc->State= HAL_SMARTCARD_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hsc);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_SMARTCARD_GET_FLAG(hsc, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE and RXNE interrupts for the interrupt process */
+          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE);
+          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE);
+
+          hsc->State= HAL_SMARTCARD_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hsc);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief Send an amount of data in non blocking mode
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc)
+{
+  uint16_t* tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = hsc->State;
+  if((tmp1 == HAL_SMARTCARD_STATE_BUSY_TX) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX_RX))
+  {
+    tmp = (uint16_t*) hsc->pTxBuffPtr;
+    hsc->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
+    hsc->pTxBuffPtr += 1;
+
+    if(--hsc->TxXferCount == 0)
+    {
+      /* Disable the SMARTCARD Transmit data register empty Interrupt */
+      __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE);
+
+      /* Enable the SMARTCARD Transmit Complete Interrupt */
+      __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TC);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Wraps up transmission in non blocking mode.
+  * @param  hsmartcard: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for the specified SMARTCARD module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Disable the SMARTCARD Transmit Complete Interrupt */
+  __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TC);
+
+  /* Check if a receive process is ongoing or not */
+  if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
+  {
+    hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
+  }
+  else
+  {
+    /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
+
+    hsmartcard->State = HAL_SMARTCARD_STATE_READY;
+  }
+
+  HAL_SMARTCARD_TxCpltCallback(hsmartcard);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Receive an amount of data in non blocking mode
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc)
+{
+  uint16_t* tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = hsc->State;
+  if((tmp1 == HAL_SMARTCARD_STATE_BUSY_RX) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX_RX))
+  {
+    tmp = (uint16_t*) hsc->pRxBuffPtr;
+    *tmp = (uint16_t)(hsc->Instance->DR & (uint16_t)0x00FF);
+    hsc->pRxBuffPtr += 1;
+
+    if(--hsc->RxXferCount == 0)
+    {
+      __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE);
+
+      /* Disable the SMARTCARD Parity Error Interrupt */
+      __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_PE);
+
+      /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+      __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR);
+
+      /* Check if a non-blocking transmit process is ongoing or not */
+      if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
+      {
+        hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
+      }
+      else
+      {
+        hsc->State = HAL_SMARTCARD_STATE_READY;
+      }
+
+      HAL_SMARTCARD_RxCpltCallback(hsc);
+
+      return HAL_OK;
+    }
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Configure the SMARTCARD peripheral
+  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for SMARTCARD module.
+  * @retval None
+  */
+static void SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsc)
+{
+  uint32_t tmpreg = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
+  assert_param(IS_SMARTCARD_POLARITY(hsc->Init.CLKPolarity));
+  assert_param(IS_SMARTCARD_PHASE(hsc->Init.CLKPhase));
+  assert_param(IS_SMARTCARD_LASTBIT(hsc->Init.CLKLastBit));
+  assert_param(IS_SMARTCARD_BAUDRATE(hsc->Init.BaudRate));
+  assert_param(IS_SMARTCARD_WORD_LENGTH(hsc->Init.WordLength));
+  assert_param(IS_SMARTCARD_STOPBITS(hsc->Init.StopBits));
+  assert_param(IS_SMARTCARD_PARITY(hsc->Init.Parity));
+  assert_param(IS_SMARTCARD_MODE(hsc->Init.Mode));
+  assert_param(IS_SMARTCARD_NACK_STATE(hsc->Init.NACKState));
+
+  /* The LBCL, CPOL and CPHA bits have to be selected when both the transmitter and the
+     receiver are disabled (TE=RE=0) to ensure that the clock pulses function correctly. */
+  hsc->Instance->CR1 &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
+
+  /*---------------------------- USART CR2 Configuration ---------------------*/
+  tmpreg = hsc->Instance->CR2;
+  /* Clear CLKEN, CPOL, CPHA and LBCL bits */
+  tmpreg &= (uint32_t)~((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | USART_CR2_LBCL));
+  /* Configure the SMARTCARD Clock, CPOL, CPHA and LastBit -----------------------*/
+  /* Set CPOL bit according to hsc->Init.CLKPolarity value */
+  /* Set CPHA bit according to hsc->Init.CLKPhase value */
+  /* Set LBCL bit according to hsc->Init.CLKLastBit value */
+  /* Set Stop Bits: Set STOP[13:12] bits according to hsc->Init.StopBits value */
+  tmpreg |= (uint32_t)(USART_CR2_CLKEN | hsc->Init.CLKPolarity |
+                      hsc->Init.CLKPhase| hsc->Init.CLKLastBit | hsc->Init.StopBits);
+  /* Write to USART CR2 */
+  hsc->Instance->CR2 = (uint32_t)tmpreg;
+
+  tmpreg = hsc->Instance->CR2;
+
+  /* Clear STOP[13:12] bits */
+  tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP);
+
+  /* Set Stop Bits: Set STOP[13:12] bits according to hsc->Init.StopBits value */
+  tmpreg |= (uint32_t)(hsc->Init.StopBits);
+
+  /* Write to USART CR2 */
+  hsc->Instance->CR2 = (uint32_t)tmpreg;
+
+  /*-------------------------- USART CR1 Configuration -----------------------*/
+  tmpreg = hsc->Instance->CR1;
+
+  /* Clear M, PCE, PS, TE and RE bits */
+  tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
+                                   USART_CR1_RE));
+
+  /* Configure the SMARTCARD Word Length, Parity and mode:
+     Set the M bits according to hsc->Init.WordLength value
+     Set PCE and PS bits according to hsc->Init.Parity value
+     Set TE and RE bits according to hsc->Init.Mode value */
+  tmpreg |= (uint32_t)hsc->Init.WordLength | hsc->Init.Parity | hsc->Init.Mode;
+
+  /* Write to USART CR1 */
+  hsc->Instance->CR1 = (uint32_t)tmpreg;
+
+  /*-------------------------- USART CR3 Configuration -----------------------*/
+  /* Clear CTSE and RTSE bits */
+  hsc->Instance->CR3 &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));
+
+  /*-------------------------- USART BRR Configuration -----------------------*/
+  if((hsc->Instance == USART1) || (hsc->Instance == USART6))
+  {
+    hsc->Instance->BRR = SMARTCARD_BRR(HAL_RCC_GetPCLK2Freq(), hsc->Init.BaudRate);
+  }
+  else
+  {
+    hsc->Instance->BRR = SMARTCARD_BRR(HAL_RCC_GetPCLK1Freq(), hsc->Init.BaudRate);
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c
new file mode 100644
index 0000000..acfda1e
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c
@@ -0,0 +1,1210 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_spdifrx.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   This file provides firmware functions to manage the following
+  *          functionalities of the SPDIFRX audio interface:
+  *           + Initialization and Configuration
+  *           + Data transfers functions
+  *           + DMA transfers management
+  *           + Interrupts and flags management
+  @verbatim
+ ===============================================================================
+                  ##### How to use this driver #####
+ ===============================================================================
+ [..]
+    The SPDIFRX HAL driver can be used as follow:
+
+    (#) Declare SPDIFRX_HandleTypeDef handle structure.
+    (#) Initialize the SPDIFRX low level resources by implement the HAL_SPDIFRX_MspInit() API:
+        (##) Enable the SPDIFRX interface clock.
+        (##) SPDIFRX pins configuration:
+            (+++) Enable the clock for the SPDIFRX GPIOs.
+            (+++) Configure these SPDIFRX pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_SPDIFRX_ReceiveControlFlow_IT() and HAL_SPDIFRX_ReceiveDataFlow_IT() API's).
+            (+++) Configure the SPDIFRX interrupt priority.
+            (+++) Enable the NVIC SPDIFRX IRQ handle.
+        (##) DMA Configuration if you need to use DMA process (HAL_SPDIFRX_ReceiveDataFlow_DMA() and HAL_SPDIFRX_ReceiveControlFlow_DMA() API's).
+            (+++) Declare a DMA handle structure for the reception of the Data Flow channel.
+                      (+++) Declare a DMA handle structure for the reception of the Control Flow channel.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure CtrlRx/DataRx with the required parameters.
+            (+++) Configure the DMA Channel.
+            (+++) Associate the initialized DMA handle to the SPDIFRX DMA CtrlRx/DataRx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
+                DMA CtrlRx/DataRx channel.
+
+   (#) Program the input selection, re-tries number, wait for activity, channel status selection, data format, stereo mode and masking of user bits
+       using HAL_SPDIFRX_Init() function.
+
+   - at - The specific SPDIFRX interrupts (RXNE/CSRNE and Error Interrupts) will be managed using the macros
+       __SPDIFRX_ENABLE_IT() and __SPDIFRX_DISABLE_IT() inside the receive process.
+   - at - Make sure that ck_spdif clock is configured.
+
+   (#) Three operation modes are available within this driver :
+
+   *** Polling mode for reception operation (for debug purpose) ***
+   ================================================================
+   [..]
+     (+) Receive data flow in blocking mode using HAL_SPDIFRX_ReceiveDataFlow()
+         (+) Receive control flow of data in blocking mode using HAL_SPDIFRX_ReceiveControlFlow()
+
+   *** Interrupt mode for reception operation ***
+   =========================================
+   [..]
+     (+) Receive an amount of data (Data Flow) in non blocking mode using HAL_SPDIFRX_ReceiveDataFlow_IT()
+         (+) Receive an amount of data (Control Flow) in non blocking mode using HAL_SPDIFRX_ReceiveControlFlow_IT()
+     (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback
+     (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
+     (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can
+         add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
+
+   *** DMA mode for reception operation ***
+   ========================================
+   [..]
+     (+) Receive an amount of data (Data Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveDataFlow_DMA()
+         (+) Receive an amount of data (Control Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveControlFlow_DMA()
+     (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback
+     (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
+     (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can
+         add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
+     (+) Stop the DMA Transfer using HAL_SPDIFRX_DMAStop()
+
+   *** SPDIFRX HAL driver macros list ***
+   =============================================
+   [..]
+     Below the list of most used macros in USART HAL driver.
+      (+) __HAL_SPDIFRX_IDLE: Disable the specified SPDIFRX peripheral (IDEL State)
+      (+) __HAL_SPDIFRX_SYNC: Enable the synchronization state of the specified SPDIFRX peripheral (SYNC State)
+      (+) __HAL_SPDIFRX_RCV: Enable the receive state of the specified SPDIFRX peripheral (RCV State)
+      (+) __HAL_SPDIFRX_ENABLE_IT : Enable the specified SPDIFRX interrupts
+      (+) __HAL_SPDIFRX_DISABLE_IT : Disable the specified SPDIFRX interrupts
+      (+) __HAL_SPDIFRX_GET_FLAG: Check whether the specified SPDIFRX flag is set or not.
+
+    [..]
+      (@) You can refer to the SPDIFRX HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+/** @defgroup SPDIFRX SPDIFRX
+  * @brief SPDIFRX HAL module driver
+  * @{
+  */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+
+#if defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define SPDIFRX_TIMEOUT_VALUE  0xFFFF
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SPDIFRX_Private_Functions
+  * @{
+  */
+static void  SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void  SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void  SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma);
+static void  SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma);
+static void  SPDIFRX_DMAError(DMA_HandleTypeDef *hdma);
+static void  SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
+static void  SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
+static HAL_StatusTypeDef  SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+/**
+  * @}
+  */
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SPDIFRX_Exported_Functions SPDIFRX Exported Functions
+  * @{
+  */
+
+/** @defgroup  SPDIFRX_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+  @verbatim
+  ===============================================================================
+  ##### Initialization and de-initialization functions #####
+  ===============================================================================
+  [..]  This subsection provides a set of functions allowing to initialize and
+  de-initialize the SPDIFRX peripheral:
+
+  (+) User must Implement HAL_SPDIFRX_MspInit() function in which he configures
+  all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+  (+) Call the function HAL_SPDIFRX_Init() to configure the SPDIFRX peripheral with
+  the selected configuration:
+  (++) Input Selection (IN0, IN1,...)
+  (++) Maximum allowed re-tries during synchronization phase
+  (++) Wait for activity on SPDIF selected input
+  (++) Channel status selection (from channel A or B)
+  (++) Data format (LSB, MSB, ...)
+  (++) Stereo mode
+  (++) User bits masking (PT,C,U,V,...)
+
+  (+) Call the function HAL_SPDIFRX_DeInit() to restore the default configuration
+  of the selected SPDIFRXx peripheral.
+  @endverbatim
+  * @{
+  */
+
+/**
+  * @brief Initializes the SPDIFRX according to the specified parameters
+  *        in the SPDIFRX_InitTypeDef and create the associated handle.
+  * @param hspdif: SPDIFRX handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the SPDIFRX handle allocation */
+  if(hspdif == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the SPDIFRX parameters */
+  assert_param(IS_STEREO_MODE(hspdif->Init.StereoMode));
+  assert_param(IS_SPDIFRX_INPUT_SELECT(hspdif->Init.InputSelection));
+  assert_param(IS_SPDIFRX_MAX_RETRIES(hspdif->Init.Retries));
+  assert_param(IS_SPDIFRX_WAIT_FOR_ACTIVITY(hspdif->Init.WaitForActivity));
+  assert_param(IS_SPDIFRX_CHANNEL(hspdif->Init.ChannelSelection));
+  assert_param(IS_SPDIFRX_DATA_FORMAT(hspdif->Init.DataFormat));
+  assert_param(IS_PREAMBLE_TYPE_MASK(hspdif->Init.PreambleTypeMask));
+  assert_param(IS_CHANNEL_STATUS_MASK(hspdif->Init.ChannelStatusMask));
+  assert_param(IS_VALIDITY_MASK(hspdif->Init.ValidityBitMask));
+  assert_param(IS_PARITY_ERROR_MASK(hspdif->Init.ParityErrorMask));
+
+  if(hspdif->State == HAL_SPDIFRX_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hspdif->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+    HAL_SPDIFRX_MspInit(hspdif);
+  }
+
+     /* SPDIFRX peripheral state is BUSY*/
+   hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+  /* Disable SPDIFRX interface (IDLE State) */
+  __HAL_SPDIFRX_IDLE(hspdif);
+
+  /* Reset the old SPDIFRX CR configuration */
+  tmpreg = hspdif->Instance->CR;
+
+  tmpreg &= ~((uint16_t) SPDIFRX_CR_RXSTEO  | SPDIFRX_CR_DRFMT  | SPDIFRX_CR_PMSK |
+                         SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK  |
+                         SPDIFRX_CR_CHSEL | SPDIFRX_CR_NBTR | SPDIFRX_CR_WFA |
+                         SPDIFRX_CR_INSEL);
+
+  /* Sets the new configuration of the SPDIFRX peripheral */
+  tmpreg |= ((uint16_t) hspdif->Init.StereoMode |
+                        hspdif->Init.InputSelection |
+                        hspdif->Init.Retries |
+                        hspdif->Init.WaitForActivity |
+                        hspdif->Init.ChannelSelection |
+                        hspdif->Init.DataFormat |
+                        hspdif->Init.PreambleTypeMask |
+                        hspdif->Init.ChannelStatusMask |
+                        hspdif->Init.ValidityBitMask |
+                        hspdif->Init.ParityErrorMask);
+
+  hspdif->Instance->CR = tmpreg;
+
+  hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+
+    /* SPDIFRX peripheral state is READY*/
+  hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief DeInitializes the SPDIFRX peripheral
+  * @param hspdif: SPDIFRX handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* Check the SPDIFRX handle allocation */
+  if(hspdif == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_SPDIFRX_ALL_INSTANCE(hspdif->Instance));
+
+  hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+  /* Disable SPDIFRX interface (IDLE state) */
+  __HAL_SPDIFRX_IDLE(hspdif);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+  HAL_SPDIFRX_MspDeInit(hspdif);
+
+  hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+
+    /* SPDIFRX peripheral state is RESET*/
+  hspdif->State = HAL_SPDIFRX_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hspdif);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief SPDIFRX MSP Init
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_MspInit could be implemented in the user file
+  */
+}
+
+/**
+  * @brief SPDIFRX MSP DeInit
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_MspDeInit could be implemented in the user file
+  */
+}
+
+/**
+  * @brief Sets the SPDIFRX  dtat format according to the specified parameters
+  *        in the SPDIFRX_InitTypeDef.
+  * @param hspdif: SPDIFRX handle
+  * @param sDataFormat: SPDIFRX data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef  sDataFormat)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the SPDIFRX handle allocation */
+  if(hspdif == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the SPDIFRX parameters */
+  assert_param(IS_STEREO_MODE(sDataFormat.StereoMode));
+  assert_param(IS_SPDIFRX_DATA_FORMAT(sDataFormat.DataFormat));
+  assert_param(IS_PREAMBLE_TYPE_MASK(sDataFormat.PreambleTypeMask));
+  assert_param(IS_CHANNEL_STATUS_MASK(sDataFormat.ChannelStatusMask));
+  assert_param(IS_VALIDITY_MASK(sDataFormat.ValidityBitMask));
+  assert_param(IS_PARITY_ERROR_MASK(sDataFormat.ParityErrorMask));
+
+  /* Reset the old SPDIFRX CR configuration */
+  tmpreg = hspdif->Instance->CR;
+
+  if(((tmpreg & SPDIFRX_STATE_RCV) == SPDIFRX_STATE_RCV) &&
+    (((tmpreg & SPDIFRX_CR_DRFMT) != sDataFormat.DataFormat) ||
+    ((tmpreg & SPDIFRX_CR_RXSTEO) != sDataFormat.StereoMode)))
+  {
+      return HAL_ERROR;
+  }
+
+  tmpreg &= ~((uint16_t) SPDIFRX_CR_RXSTEO  | SPDIFRX_CR_DRFMT  | SPDIFRX_CR_PMSK |
+                         SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK);
+
+  /* Sets the new configuration of the SPDIFRX peripheral */
+  tmpreg |= ((uint16_t) sDataFormat.StereoMode |
+                        sDataFormat.DataFormat |
+                        sDataFormat.PreambleTypeMask |
+                        sDataFormat.ChannelStatusMask |
+                        sDataFormat.ValidityBitMask |
+                        sDataFormat.ParityErrorMask);
+
+  hspdif->Instance->CR = tmpreg;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Exported_Functions_Group2 IO operation functions
+  *  @brief Data transfers functions
+  *
+ at verbatim
+===============================================================================
+##### IO operation functions #####
+===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the SPDIFRX data
+    transfers.
+
+    (#) There is two mode of transfer:
+        (++) Blocking mode : The communication is performed in the polling mode.
+             The status of all data processing is returned by the same function
+             after finishing transfer.
+        (++) No-Blocking mode : The communication is performed using Interrupts
+             or DMA. These functions return the status of the transfer start-up.
+             The end of the data processing will be indicated through the
+             dedicated SPDIFRX IRQ when using Interrupt mode or the DMA IRQ when
+             using DMA mode.
+
+    (#) Blocking mode functions are :
+        (++) HAL_SPDIFRX_ReceiveDataFlow()
+        (++) HAL_SPDIFRX_ReceiveControlFlow()
+                (+@) Do not use blocking mode to receive both control and data flow at the same time.
+
+    (#) No-Blocking mode functions with Interrupt are :
+        (++) HAL_SPDIFRX_ReceiveControlFlow_IT()
+        (++) HAL_SPDIFRX_ReceiveDataFlow_IT()
+
+    (#) No-Blocking mode functions with DMA are :
+        (++) HAL_SPDIFRX_ReceiveControlFlow_DMA()
+        (++) HAL_SPDIFRX_ReceiveDataFlow_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+        (++) HAL_SPDIFRX_RxCpltCallback()
+        (++) HAL_SPDIFRX_ErrorCallback()
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Receives an amount of data (Data Flow) in blocking mode.
+  * @param  hspdif: pointer to SPDIFRX_HandleTypeDef structure that contains
+  *                 the configuration information for SPDIFRX module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout)
+{
+
+  if((pData == NULL ) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hspdif->State == HAL_SPDIFRX_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hspdif);
+
+     hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+        /* Start synchronisation */
+        __HAL_SPDIFRX_SYNC(hspdif);
+
+            /* Wait until SYNCD flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+            /* Start reception */
+      __HAL_SPDIFRX_RCV(hspdif);
+
+    /* Receive data flow */
+    while(Size > 0)
+    {
+      /* Wait until RXNE flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      (*pData++) = hspdif->Instance->DR;
+      Size--;
+    }
+
+    /* SPDIFRX ready */
+    hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspdif);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data (Control Flow) in blocking mode.
+  * @param  hspdif: pointer to a SPDIFRX_HandleTypeDef structure that contains
+  *                 the configuration information for SPDIFRX module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout)
+{
+
+  if((pData == NULL ) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hspdif->State == HAL_SPDIFRX_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hspdif);
+
+     hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+        /* Start synchronization */
+        __HAL_SPDIFRX_SYNC(hspdif);
+
+        /* Wait until SYNCD flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+        /* Start reception */
+      __HAL_SPDIFRX_RCV(hspdif);
+
+        /* Receive control flow */
+    while(Size > 0)
+    {
+      /* Wait until CSRNE flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_CSRNE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      (*pData++) = hspdif->Instance->CSR;
+      Size--;
+    }
+
+    /* SPDIFRX ready */
+    hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspdif);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief Receive an amount of data (Data Flow) in non-blocking mode with Interrupt
+  * @param hspdif: SPDIFRX handle
+  * @param pData: a 32-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be received .
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_CX))
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hspdif);
+
+    hspdif->pRxBuffPtr = pData;
+    hspdif->RxXferSize = Size;
+    hspdif->RxXferCount = Size;
+
+    hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+
+    /* Check if a receive process is ongoing or not */
+     hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
+
+
+    /* Enable the SPDIFRX  PE Error Interrupt */
+    __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+
+    /* Enable the SPDIFRX  OVR Error Interrupt */
+    __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspdif);
+
+    /* Enable the SPDIFRX RXNE interrupt */
+    __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+
+        if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00)
+        {
+        /* Start synchronization */
+        __HAL_SPDIFRX_SYNC(hspdif);
+
+        /* Wait until SYNCD flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, SPDIFRX_TIMEOUT_VALUE) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+        /* Start reception */
+      __HAL_SPDIFRX_RCV(hspdif);
+        }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data (Control Flow) with Interrupt
+  * @param hspdif: SPDIFRX handle
+  * @param pData: a 32-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample (Control Flow) to be received :
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_RX))
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hspdif);
+
+    hspdif->pCsBuffPtr = pData;
+    hspdif->CsXferSize = Size;
+    hspdif->CsXferCount = Size;
+
+    hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+
+    /* Check if a receive process is ongoing or not */
+     hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
+
+
+    /* Enable the SPDIFRX PE Error Interrupt */
+     __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+
+    /* Enable the SPDIFRX OVR Error Interrupt */
+     __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspdif);
+
+    /* Enable the SPDIFRX CSRNE interrupt */
+    __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+
+        if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00)
+        {
+        /* Start synchronization */
+        __HAL_SPDIFRX_SYNC(hspdif);
+
+        /* Wait until SYNCD flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, SPDIFRX_TIMEOUT_VALUE) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+        /* Start reception */
+      __HAL_SPDIFRX_RCV(hspdif);
+      }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data (Data Flow) mode with DMA
+  * @param hspdif: SPDIFRX handle
+  * @param pData: a 32-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be received :
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+
+  if((pData == NULL) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_CX))
+  {
+    hspdif->pRxBuffPtr = pData;
+    hspdif->RxXferSize = Size;
+    hspdif->RxXferCount = Size;
+
+    /* Process Locked */
+    __HAL_LOCK(hspdif);
+
+    hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+    hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
+
+    /* Set the SPDIFRX Rx DMA Half transfer complete callback */
+    hspdif->hdmaDrRx->XferHalfCpltCallback = SPDIFRX_DMARxHalfCplt;
+
+    /* Set the SPDIFRX Rx DMA transfer complete callback */
+    hspdif->hdmaDrRx->XferCpltCallback = SPDIFRX_DMARxCplt;
+
+    /* Set the DMA error callback */
+    hspdif->hdmaDrRx->XferErrorCallback = SPDIFRX_DMAError;
+
+    /* Enable the DMA request */
+    HAL_DMA_Start_IT(hspdif->hdmaDrRx, (uint32_t)&hspdif->Instance->DR, (uint32_t)hspdif->pRxBuffPtr, Size);
+
+    /* Enable RXDMAEN bit in SPDIFRX CR register for data flow reception*/
+     hspdif->Instance->CR |= SPDIFRX_CR_RXDMAEN;
+
+        if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00)
+        {
+        /* Start synchronization */
+        __HAL_SPDIFRX_SYNC(hspdif);
+
+        /* Wait until SYNCD flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, SPDIFRX_TIMEOUT_VALUE) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+        /* Start reception */
+      __HAL_SPDIFRX_RCV(hspdif);
+        }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspdif);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data (Control Flow) with DMA
+  * @param hspdif: SPDIFRX handle
+  * @param pData: a 32-bit pointer to the Receive data buffer.
+  * @param Size: number of data (Control Flow) sample to be received :
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+  if((pData == NULL) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_RX))
+  {
+    hspdif->pCsBuffPtr = pData;
+    hspdif->CsXferSize = Size;
+    hspdif->CsXferCount = Size;
+
+    /* Process Locked */
+    __HAL_LOCK(hspdif);
+
+    hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+    hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
+
+    /* Set the SPDIFRX Rx DMA Half transfer complete callback */
+    hspdif->hdmaCsRx->XferHalfCpltCallback = SPDIFRX_DMACxHalfCplt;
+
+    /* Set the SPDIFRX Rx DMA transfer complete callback */
+    hspdif->hdmaCsRx->XferCpltCallback = SPDIFRX_DMACxCplt;
+
+    /* Set the DMA error callback */
+    hspdif->hdmaCsRx->XferErrorCallback = SPDIFRX_DMAError;
+
+    /* Enable the DMA request */
+    HAL_DMA_Start_IT(hspdif->hdmaCsRx, (uint32_t)&hspdif->Instance->CSR, (uint32_t)hspdif->pCsBuffPtr, Size);
+
+    /* Enable CBDMAEN bit in SPDIFRX CR register for control flow reception*/
+    hspdif->Instance->CR |= SPDIFRX_CR_CBDMAEN;
+
+        if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00)
+        {
+        /* Start synchronization */
+        __HAL_SPDIFRX_SYNC(hspdif);
+
+        /* Wait until SYNCD flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, SPDIFRX_TIMEOUT_VALUE) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+        /* Start reception */
+      __HAL_SPDIFRX_RCV(hspdif);
+        }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspdif);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief stop the audio stream receive from the Media.
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* Process Locked */
+  __HAL_LOCK(hspdif);
+
+  /* Disable the SPDIFRX DMA requests */
+  hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
+  hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
+
+  /* Disable the SPDIFRX DMA channel */
+  __HAL_DMA_DISABLE(hspdif->hdmaDrRx);
+  __HAL_DMA_DISABLE(hspdif->hdmaCsRx);
+
+  /* Disable SPDIFRX peripheral */
+  __HAL_SPDIFRX_IDLE(hspdif);
+
+  hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspdif);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles SPDIFRX interrupt request.
+  * @param  hspdif: SPDIFRX handle
+  * @retval HAL status
+  */
+void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* SPDIFRX in mode Data Flow Reception ------------------------------------------------*/
+  if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_RXNE) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_RXNE) != RESET))
+  {
+      __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_RXNE);
+    SPDIFRX_ReceiveDataFlow_IT(hspdif);
+  }
+
+   /* SPDIFRX in mode Control Flow Reception ------------------------------------------------*/
+  if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_CSRNE) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_CSRNE) != RESET))
+  {
+        __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_CSRNE);
+    SPDIFRX_ReceiveControlFlow_IT(hspdif);
+  }
+
+  /* SPDIFRX Overrun error interrupt occurred ---------------------------------*/
+  if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_OVR) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_OVRIE) != RESET))
+  {
+    __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_FLAG_OVR);
+
+        /* Change the SPDIFRX error code */
+    hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_OVR;
+
+        /* the transfer is not stopped */
+    HAL_SPDIFRX_ErrorCallback(hspdif);
+  }
+
+      /* SPDIFRX Parity error interrupt occurred ---------------------------------*/
+  if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_PERR) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_PERRIE) != RESET))
+  {
+    __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_FLAG_PERR);
+
+        /* Change the SPDIFRX error code */
+    hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_PE;
+
+        /* the transfer is not stopped */
+    HAL_SPDIFRX_ErrorCallback(hspdif);
+  }
+
+}
+
+/**
+  * @brief Rx Transfer (Data flow) half completed callbacks
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief Rx Transfer (Data flow) completed callbacks
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief Rx (Control flow) Transfer half completed callbacks
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief Rx Transfer (Control flow) completed callbacks
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief SPDIFRX error callbacks
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_ErrorCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Exported_Functions_Group3 Peripheral State and Errors functions
+  *  @brief   Peripheral State functions
+  *
+ at verbatim
+===============================================================================
+##### Peripheral State and Errors functions #####
+===============================================================================
+[..]
+This subsection permit to get in run-time the status of the peripheral
+and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the SPDIFRX state
+  * @param  hspdif : SPDIFRX handle
+  * @retval HAL state
+  */
+HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif)
+{
+  return hspdif->State;
+}
+
+/**
+  * @brief  Return the SPDIFRX error code
+  * @param  hspdif : SPDIFRX handle
+  * @retval SPDIFRX Error Code
+  */
+uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif)
+{
+  return hspdif->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief DMA SPDIFRX receive process (Data flow) complete callback
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+  SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Disable Rx DMA Request */
+  hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
+  hspdif->RxXferCount = 0;
+
+  hspdif->State = HAL_SPDIFRX_STATE_READY;
+  HAL_SPDIFRX_RxCpltCallback(hspdif);
+}
+
+/**
+  * @brief DMA SPDIFRX receive process (Data flow) half complete callback
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_SPDIFRX_RxHalfCpltCallback(hspdif);
+}
+
+
+/**
+  * @brief DMA SPDIFRX receive process (Control flow) complete callback
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma)
+{
+  SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Disable Cb DMA Request */
+  hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
+  hspdif->CsXferCount = 0;
+
+  hspdif->State = HAL_SPDIFRX_STATE_READY;
+  HAL_SPDIFRX_CxCpltCallback(hspdif);
+}
+
+/**
+  * @brief DMA SPDIFRX receive process (Control flow) half complete callback
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_SPDIFRX_CxHalfCpltCallback(hspdif);
+}
+
+/**
+  * @brief DMA SPDIFRX communication error callback
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma)
+{
+  SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Disable Rx and Cb DMA Request */
+  hspdif->Instance->CR &= (uint16_t)(~(SPDIFRX_CR_RXDMAEN | SPDIFRX_CR_CBDMAEN));
+  hspdif->RxXferCount = 0;
+
+  hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+  /* Set the error code and execute error callback*/
+  hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_DMA;
+  HAL_SPDIFRX_ErrorCallback(hspdif);
+}
+
+
+/**
+  * @brief Receive an amount of data (Data Flow) with Interrupt
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
+{
+    /* Receive data */
+    (*hspdif->pRxBuffPtr++) = hspdif->Instance->DR;
+    hspdif->RxXferCount--;
+
+    if(hspdif->RxXferCount == 0)
+    {
+      /* Disable RXNE/PE and OVR interrupts */
+      __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE | SPDIFRX_IT_PERRIE | SPDIFRX_IT_RXNE);
+
+      hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hspdif);
+
+      HAL_SPDIFRX_RxCpltCallback(hspdif);
+    }
+}
+
+/**
+  * @brief Receive an amount of data (Control Flow) with Interrupt
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
+{
+    /* Receive data */
+    (*hspdif->pCsBuffPtr++) = hspdif->Instance->CSR;
+    hspdif->CsXferCount--;
+
+    if(hspdif->CsXferCount == 0)
+    {
+      /* Disable CSRNE interrupt */
+      __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+
+       hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hspdif);
+
+      HAL_SPDIFRX_CxCpltCallback(hspdif);
+    }
+}
+
+/**
+  * @brief This function handles SPDIFRX Communication Timeout.
+  * @param hspdif: SPDIFRX handle
+  * @param Flag: Flag checked
+  * @param Status: Value of the flag expected
+  * @param Timeout: Duration of the timeout
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+          hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hspdif);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+                    __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+          hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hspdif);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+#endif /* STM32F446xx */
+
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c
new file mode 100644
index 0000000..481a52f
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c
@@ -0,0 +1,2298 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_spi.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   SPI HAL module driver.
+  *
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Serial Peripheral Interface (SPI) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The SPI HAL driver can be used as follows:
+
+      (#) Declare a SPI_HandleTypeDef handle structure, for example:
+          SPI_HandleTypeDef  hspi;
+
+      (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit ()API:
+          (##) Enable the SPIx interface clock
+          (##) SPI pins configuration
+              (+++) Enable the clock for the SPI GPIOs
+              (+++) Configure these SPI pins as alternate function push-pull
+          (##) NVIC configuration if you need to use interrupt process
+              (+++) Configure the SPIx interrupt priority
+              (+++) Enable the NVIC SPI IRQ handle
+          (##) DMA Configuration if you need to use DMA process
+              (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
+              (+++) Enable the DMAx interface clock using
+              (+++) Configure the DMA handle parameters
+              (+++) Configure the DMA Tx or Rx Stream
+              (+++) Associate the initialized hdma_tx handle to the hspi DMA Tx or Rx handle
+              (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream
+
+      (#) Program the Mode, Direction , Data size, Baudrate Prescaler, NSS
+          management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure.
+
+      (#) Initialize the SPI registers by calling the HAL_SPI_Init() API:
+          (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+              by calling the customized HAL_SPI_MspInit() API.
+     [..]
+       Circular mode restriction:
+      (#) The DMA circular mode cannot be used when the SPI is configured in these modes:
+          (##) Master 2Lines RxOnly
+          (##) Master 1Line Rx
+      (#) The CRC feature is not managed when the DMA circular mode is enabled
+      (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs
+          the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks
+
+
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SPI SPI
+  * @brief SPI HAL module driver
+  * @{
+  */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define SPI_TIMEOUT_VALUE  10
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SPI_Private_Functions
+  * @{
+  */
+static void SPI_TxCloseIRQHandler(SPI_HandleTypeDef *hspi);
+static void SPI_TxISR(SPI_HandleTypeDef *hspi);
+static void SPI_RxCloseIRQHandler(SPI_HandleTypeDef *hspi);
+static void SPI_2LinesRxISR(SPI_HandleTypeDef *hspi);
+static void SPI_RxISR(SPI_HandleTypeDef *hspi);
+static void SPI_DMAEndTransmitReceive(SPI_HandleTypeDef *hspi);
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SPI_WaitOnFlagUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Functions SPI Exported Functions
+  * @{
+  */
+
+/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and
+          de-initialize the SPIx peripheral:
+
+      (+) User must implement HAL_SPI_MspInit() function in which he configures
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+      (+) Call the function HAL_SPI_Init() to configure the selected device with
+          the selected configuration:
+        (++) Mode
+        (++) Direction
+        (++) Data Size
+        (++) Clock Polarity and Phase
+        (++) NSS Management
+        (++) BaudRate Prescaler
+        (++) FirstBit
+        (++) TIMode
+        (++) CRC Calculation
+        (++) CRC Polynomial if CRC enabled
+
+      (+) Call the function HAL_SPI_DeInit() to restore the default configuration
+          of the selected SPIx peripheral.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the SPI according to the specified parameters
+  *         in the SPI_InitTypeDef and create the associated handle.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi)
+{
+  /* Check the SPI handle allocation */
+  if(hspi == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_SPI_MODE(hspi->Init.Mode));
+  assert_param(IS_SPI_DIRECTION_MODE(hspi->Init.Direction));
+  assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize));
+  assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity));
+  assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase));
+  assert_param(IS_SPI_NSS(hspi->Init.NSS));
+  assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
+  assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit));
+  assert_param(IS_SPI_TIMODE(hspi->Init.TIMode));
+  assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation));
+  assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial));
+
+  if(hspi->State == HAL_SPI_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hspi->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+    HAL_SPI_MspInit(hspi);
+  }
+
+  hspi->State = HAL_SPI_STATE_BUSY;
+
+  /* Disable the selected SPI peripheral */
+  __HAL_SPI_DISABLE(hspi);
+
+  /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/
+  /* Configure : SPI Mode, Communication Mode, Data size, Clock polarity and phase, NSS management,
+  Communication speed, First bit and CRC calculation state */
+  hspi->Instance->CR1 = (hspi->Init.Mode | hspi->Init.Direction | hspi->Init.DataSize |
+                         hspi->Init.CLKPolarity | hspi->Init.CLKPhase | (hspi->Init.NSS & SPI_CR1_SSM) |
+                         hspi->Init.BaudRatePrescaler | hspi->Init.FirstBit  | hspi->Init.CRCCalculation);
+
+  /* Configure : NSS management */
+  hspi->Instance->CR2 = (((hspi->Init.NSS >> 16) & SPI_CR2_SSOE) | hspi->Init.TIMode);
+
+  /*---------------------------- SPIx CRCPOLY Configuration ------------------*/
+  /* Configure : CRC Polynomial */
+  hspi->Instance->CRCPR = hspi->Init.CRCPolynomial;
+
+  /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */
+  hspi->Instance->I2SCFGR &= (uint32_t)(~SPI_I2SCFGR_I2SMOD);
+
+  hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+  hspi->State = HAL_SPI_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the SPI peripheral
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi)
+{
+  /* Check the SPI handle allocation */
+  if(hspi == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Disable the SPI Peripheral Clock */
+  __HAL_SPI_DISABLE(hspi);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+  HAL_SPI_MspDeInit(hspi);
+
+  hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+  hspi->State = HAL_SPI_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief SPI MSP Init
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+ __weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi)
+ {
+   /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief SPI MSP DeInit
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+ __weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Exported_Functions_Group2 IO operation functions
+ *  @brief   Data transfers functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    This subsection provides a set of functions allowing to manage the SPI
+    data transfers.
+
+    [..] The SPI supports master and slave mode :
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode: The communication is performed in polling mode.
+            The HAL status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode: The communication is performed using Interrupts
+           or DMA, These APIs return the HAL status.
+           The end of the data processing will be indicated through the
+           dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when
+           using DMA mode.
+           The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks
+           will be executed respectively at the end of the transmit or Receive process
+           The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected
+
+    (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA)
+        exist for 1Line (simplex) and 2Lines (full duplex) modes.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Transmit an amount of data in blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Check the parameters */
+    assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Configure communication */
+    hspi->State = HAL_SPI_STATE_BUSY_TX;
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+
+    hspi->pTxBuffPtr = pData;
+    hspi->TxXferSize = Size;
+    hspi->TxXferCount = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->TxISR = 0;
+    hspi->RxISR = 0;
+    hspi->RxXferSize   = 0;
+    hspi->RxXferCount  = 0;
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+      /* Configure communication direction : 1Line */
+      SPI_1LINE_TX(hspi);
+    }
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    /* Transmit data in 8 Bit mode */
+    if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+    {
+      if((hspi->Init.Mode == SPI_MODE_SLAVE)|| (hspi->TxXferCount == 0x01))
+      {
+        hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+        hspi->TxXferCount--;
+      }
+      while(hspi->TxXferCount > 0)
+      {
+        /* Wait until TXE flag is set to send data */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+        hspi->TxXferCount--;
+      }
+      /* Enable CRC Transmission */
+      if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+      {
+        hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+      }
+    }
+    /* Transmit data in 16 Bit mode */
+    else
+    {
+      if((hspi->Init.Mode == SPI_MODE_SLAVE) || (hspi->TxXferCount == 0x01))
+      {
+        hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+        hspi->pTxBuffPtr+=2;
+        hspi->TxXferCount--;
+      }
+      while(hspi->TxXferCount > 0)
+      {
+        /* Wait until TXE flag is set to send data */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+        hspi->pTxBuffPtr+=2;
+        hspi->TxXferCount--;
+      }
+      /* Enable CRC Transmission */
+      if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+      {
+        hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+      }
+    }
+
+    /* Wait until TXE flag is set to send data */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+      return HAL_TIMEOUT;
+    }
+
+    /* Wait until Busy flag is reset before disabling SPI */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, Timeout) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+      return HAL_TIMEOUT;
+    }
+
+    /* Clear OVERRUN flag in 2 Lines communication mode because received is not read */
+    if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+    {
+      __HAL_SPI_CLEAR_OVRFLAG(hspi);
+    }
+
+    hspi->State = HAL_SPI_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  __IO uint16_t tmpreg;
+  uint32_t tmp = 0;
+
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Configure communication */
+    hspi->State       = HAL_SPI_STATE_BUSY_RX;
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+
+    hspi->pRxBuffPtr  = pData;
+    hspi->RxXferSize  = Size;
+    hspi->RxXferCount = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->RxISR = 0;
+    hspi->TxISR = 0;
+    hspi->TxXferSize   = 0;
+    hspi->TxXferCount  = 0;
+
+    /* Configure communication direction : 1Line */
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+      SPI_1LINE_RX(hspi);
+    }
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hspi);
+
+      /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+      return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout);
+    }
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    /* Receive data in 8 Bit mode */
+    if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+    {
+      while(hspi->RxXferCount > 1)
+      {
+        /* Wait until RXNE flag is set */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
+        hspi->RxXferCount--;
+      }
+      /* Enable CRC Transmission */
+      if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+      {
+        hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+      }
+    }
+    /* Receive data in 16 Bit mode */
+    else
+    {
+      while(hspi->RxXferCount > 1)
+      {
+        /* Wait until RXNE flag is set to read data */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+        hspi->pRxBuffPtr+=2;
+        hspi->RxXferCount--;
+      }
+      /* Enable CRC Transmission */
+      if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+      {
+        hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+      }
+    }
+
+    /* Wait until RXNE flag is set */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Receive last data in 8 Bit mode */
+    if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+    {
+      (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
+    }
+    /* Receive last data in 16 Bit mode */
+    else
+    {
+      *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+      hspi->pRxBuffPtr+=2;
+    }
+    hspi->RxXferCount--;
+
+    /* Wait until RXNE flag is set: CRC Received */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+        return HAL_TIMEOUT;
+      }
+
+      /* Read CRC to Flush RXNE flag */
+      tmpreg = hspi->Instance->DR;
+      UNUSED(tmpreg);
+    }
+
+    if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+    {
+      /* Disable SPI peripheral */
+      __HAL_SPI_DISABLE(hspi);
+    }
+
+    hspi->State = HAL_SPI_STATE_READY;
+
+    tmp = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR);
+    /* Check if CRC error occurred */
+    if((hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) && (tmp != RESET))
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+
+      /* Reset CRC Calculation */
+      SPI_RESET_CRC(hspi);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hspi);
+
+      return HAL_ERROR;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit and Receive an amount of data in blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pTxData: pointer to transmission data buffer
+  * @param  pRxData: pointer to reception data buffer to be
+  * @param  Size: amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+  __IO uint16_t tmpreg;
+  uint32_t tmpstate = 0, tmp = 0;
+
+  tmpstate = hspi->State;
+  if((tmpstate == HAL_SPI_STATE_READY) || (tmpstate == HAL_SPI_STATE_BUSY_RX))
+  {
+    if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Check the parameters */
+    assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+    if(hspi->State == HAL_SPI_STATE_READY)
+    {
+      hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+    }
+
+     /* Configure communication */
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+
+    hspi->pRxBuffPtr  = pRxData;
+    hspi->RxXferSize  = Size;
+    hspi->RxXferCount = Size;
+
+    hspi->pTxBuffPtr  = pTxData;
+    hspi->TxXferSize  = Size;
+    hspi->TxXferCount = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->RxISR = 0;
+    hspi->TxISR = 0;
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    /* Transmit and Receive data in 16 Bit mode */
+    if(hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+    {
+      if((hspi->Init.Mode == SPI_MODE_SLAVE) || ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->TxXferCount == 0x01)))
+      {
+        hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+        hspi->pTxBuffPtr+=2;
+        hspi->TxXferCount--;
+      }
+      if(hspi->TxXferCount == 0)
+      {
+        /* Enable CRC Transmission */
+        if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+        {
+          hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+        }
+
+        /* Wait until RXNE flag is set */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+        hspi->pRxBuffPtr+=2;
+        hspi->RxXferCount--;
+      }
+      else
+      {
+        while(hspi->TxXferCount > 0)
+        {
+          /* Wait until TXE flag is set to send data */
+          if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+          hspi->pTxBuffPtr+=2;
+          hspi->TxXferCount--;
+
+          /* Enable CRC Transmission */
+          if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+          {
+            hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+          }
+
+          /* Wait until RXNE flag is set */
+          if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+          hspi->pRxBuffPtr+=2;
+          hspi->RxXferCount--;
+        }
+        /* Receive the last byte */
+        if(hspi->Init.Mode == SPI_MODE_SLAVE)
+        {
+          /* Wait until RXNE flag is set */
+          if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+          hspi->pRxBuffPtr+=2;
+          hspi->RxXferCount--;
+        }
+      }
+    }
+    /* Transmit and Receive data in 8 Bit mode */
+    else
+    {
+      if((hspi->Init.Mode == SPI_MODE_SLAVE) || ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->TxXferCount == 0x01)))
+      {
+        hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+        hspi->TxXferCount--;
+      }
+      if(hspi->TxXferCount == 0)
+      {
+        /* Enable CRC Transmission */
+        if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+        {
+          hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+        }
+
+        /* Wait until RXNE flag is set */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        (*hspi->pRxBuffPtr) = hspi->Instance->DR;
+        hspi->RxXferCount--;
+      }
+      else
+      {
+        while(hspi->TxXferCount > 0)
+        {
+          /* Wait until TXE flag is set to send data */
+          if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+          hspi->TxXferCount--;
+
+          /* Enable CRC Transmission */
+          if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+          {
+            hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+          }
+
+            /* Wait until RXNE flag is set */
+            if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+            {
+              return HAL_TIMEOUT;
+            }
+
+            (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
+            hspi->RxXferCount--;
+        }
+        if(hspi->Init.Mode == SPI_MODE_SLAVE)
+        {
+          /* Wait until RXNE flag is set */
+          if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
+          hspi->RxXferCount--;
+        }
+      }
+    }
+
+    /* Read CRC from DR to close CRC calculation process */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      /* Wait until RXNE flag is set */
+      if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+        return HAL_TIMEOUT;
+      }
+      /* Read CRC */
+      tmpreg = hspi->Instance->DR;
+      UNUSED(tmpreg);
+    }
+
+    /* Wait until Busy flag is reset before disabling SPI */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, Timeout) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+      return HAL_TIMEOUT;
+    }
+
+    hspi->State = HAL_SPI_STATE_READY;
+
+    tmp = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR);
+    /* Check if CRC error occurred */
+    if((hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) && (tmp != RESET))
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+
+      /* Reset CRC Calculation */
+      if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+      {
+        SPI_RESET_CRC(hspi);
+      }
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hspi);
+
+      return HAL_ERROR;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit an amount of data in no-blocking mode with Interrupt
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Check the parameters */
+    assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Configure communication */
+    hspi->State        = HAL_SPI_STATE_BUSY_TX;
+    hspi->ErrorCode    = HAL_SPI_ERROR_NONE;
+
+    hspi->TxISR = &SPI_TxISR;
+    hspi->pTxBuffPtr   = pData;
+    hspi->TxXferSize   = Size;
+    hspi->TxXferCount  = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->RxISR = 0;
+    hspi->RxXferSize   = 0;
+    hspi->RxXferCount  = 0;
+
+    /* Configure communication direction : 1Line */
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+      SPI_1LINE_TX(hspi);
+    }
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+    {
+      __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE));
+    }else
+    {
+      /* Enable TXE and ERR interrupt */
+      __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+    }
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in no-blocking mode with Interrupt
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Configure communication */
+    hspi->State        = HAL_SPI_STATE_BUSY_RX;
+    hspi->ErrorCode    = HAL_SPI_ERROR_NONE;
+
+    hspi->RxISR = &SPI_RxISR;
+    hspi->pRxBuffPtr   = pData;
+    hspi->RxXferSize   = Size;
+    hspi->RxXferCount  = Size ;
+
+   /*Init field not used in handle to zero */
+    hspi->TxISR = 0;
+    hspi->TxXferSize   = 0;
+    hspi->TxXferCount  = 0;
+
+    /* Configure communication direction : 1Line */
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+       SPI_1LINE_RX(hspi);
+    }
+    else if((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER))
+    {
+       /* Process Unlocked */
+       __HAL_UNLOCK(hspi);
+
+       /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+       return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size);
+    }
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    /* Enable TXE and ERR interrupt */
+    __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Note : The SPI must be enabled after unlocking current process
+              to avoid the risk of SPI interrupt handle execution before current
+              process unlock */
+
+        /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit and Receive an amount of data in no-blocking mode with Interrupt
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pTxData: pointer to transmission data buffer
+  * @param  pRxData: pointer to reception data buffer to be
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t tmpstate = 0;
+
+ tmpstate = hspi->State;
+  if((tmpstate == HAL_SPI_STATE_READY) || \
+     ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmpstate == HAL_SPI_STATE_BUSY_RX)))
+  {
+    if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Check the parameters */
+    assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+    /* Process locked */
+    __HAL_LOCK(hspi);
+
+    /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+    if(hspi->State != HAL_SPI_STATE_BUSY_RX)
+    {
+      hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+    }
+
+    /* Configure communication */
+    hspi->ErrorCode    = HAL_SPI_ERROR_NONE;
+
+    hspi->TxISR = &SPI_TxISR;
+    hspi->pTxBuffPtr   = pTxData;
+    hspi->TxXferSize   = Size;
+    hspi->TxXferCount  = Size;
+
+    hspi->RxISR = &SPI_2LinesRxISR;
+    hspi->pRxBuffPtr   = pRxData;
+    hspi->RxXferSize   = Size;
+    hspi->RxXferCount  = Size;
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    /* Enable TXE, RXNE and ERR interrupt */
+    __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit an amount of data in no-blocking mode with DMA
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Check the parameters */
+    assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Configure communication */
+    hspi->State       = HAL_SPI_STATE_BUSY_TX;
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+
+    hspi->pTxBuffPtr  = pData;
+    hspi->TxXferSize  = Size;
+    hspi->TxXferCount = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->TxISR = 0;
+    hspi->RxISR = 0;
+    hspi->RxXferSize   = 0;
+    hspi->RxXferCount  = 0;
+
+    /* Configure communication direction : 1Line */
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+      SPI_1LINE_TX(hspi);
+    }
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    /* Set the SPI TxDMA Half transfer complete callback */
+    hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt;
+
+    /* Set the SPI TxDMA transfer complete callback */
+    hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt;
+
+    /* Set the DMA error callback */
+    hspi->hdmatx->XferErrorCallback = SPI_DMAError;
+
+    /* Enable the Tx DMA Stream */
+    HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    /* Enable Tx DMA Request */
+    hspi->Instance->CR2 |= SPI_CR2_TXDMAEN;
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in no-blocking mode with DMA
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *         the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @note  When the CRC feature is enabled the pData Length must be Size + 1.
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Configure communication */
+    hspi->State       = HAL_SPI_STATE_BUSY_RX;
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+
+    hspi->pRxBuffPtr  = pData;
+    hspi->RxXferSize  = Size;
+    hspi->RxXferCount = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->RxISR = 0;
+    hspi->TxISR = 0;
+    hspi->TxXferSize   = 0;
+    hspi->TxXferCount  = 0;
+
+    /* Configure communication direction : 1Line */
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+       SPI_1LINE_RX(hspi);
+    }
+    else if((hspi->Init.Direction == SPI_DIRECTION_2LINES)&&(hspi->Init.Mode == SPI_MODE_MASTER))
+    {
+       /* Process Unlocked */
+       __HAL_UNLOCK(hspi);
+
+       /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+       return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size);
+    }
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    /* Set the SPI RxDMA Half transfer complete callback */
+    hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+
+    /* Set the SPI Rx DMA transfer complete callback */
+    hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+
+    /* Set the DMA error callback */
+    hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+    /* Enable the Rx DMA Stream */
+    HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    /* Enable Rx DMA Request */
+    hspi->Instance->CR2 |= SPI_CR2_RXDMAEN;
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit and Receive an amount of data in no-blocking mode with DMA
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pTxData: pointer to transmission data buffer
+  * @param  pRxData: pointer to reception data buffer
+  * @note  When the CRC feature is enabled the pRxData Length must be Size + 1
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+  uint32_t tmpstate = 0;
+  tmpstate = hspi->State;
+  if((tmpstate == HAL_SPI_STATE_READY) || ((hspi->Init.Mode == SPI_MODE_MASTER) && \
+     (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmpstate == HAL_SPI_STATE_BUSY_RX)))
+  {
+    if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Check the parameters */
+    assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+    /* Process locked */
+    __HAL_LOCK(hspi);
+
+    /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+    if(hspi->State != HAL_SPI_STATE_BUSY_RX)
+    {
+      hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+    }
+
+    /* Configure communication */
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+
+    hspi->pTxBuffPtr  = (uint8_t*)pTxData;
+    hspi->TxXferSize  = Size;
+    hspi->TxXferCount = Size;
+
+    hspi->pRxBuffPtr  = (uint8_t*)pRxData;
+    hspi->RxXferSize  = Size;
+    hspi->RxXferCount = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->RxISR = 0;
+    hspi->TxISR = 0;
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */
+    if(hspi->State == HAL_SPI_STATE_BUSY_RX)
+    {
+      /* Set the SPI Rx DMA Half transfer complete callback */
+      hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+
+      hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+    }
+    else
+    {
+      /* Set the SPI Tx/Rx DMA Half transfer complete callback */
+      hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt;
+
+      hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt;
+    }
+
+    /* Set the DMA error callback */
+    hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+    /* Enable the Rx DMA Stream */
+    HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount);
+
+    /* Enable Rx DMA Request */
+    hspi->Instance->CR2 |= SPI_CR2_RXDMAEN;
+
+    /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing
+    is performed in DMA reception complete callback  */
+    hspi->hdmatx->XferCpltCallback = NULL;
+
+    if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX)
+    {
+      /* Set the DMA error callback */
+      hspi->hdmatx->XferErrorCallback = SPI_DMAError;
+    }
+    else
+    {
+      hspi->hdmatx->XferErrorCallback = NULL;
+    }
+
+    /* Enable the Tx DMA Stream */
+    HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    /* Enable Tx DMA Request */
+    hspi->Instance->CR2 |= SPI_CR2_TXDMAEN;
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Pauses the DMA Transfer.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi)
+{
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  /* Disable the SPI DMA Tx & Rx requests */
+  hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+  hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the DMA Transfer.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi)
+{
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  /* Enable the SPI DMA Tx & Rx requests */
+  hspi->Instance->CR2 |= SPI_CR2_TXDMAEN;
+  hspi->Instance->CR2 |= SPI_CR2_RXDMAEN;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Stops the DMA Transfer.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi)
+{
+  /* The Lock is not implemented on this API to allow the user application
+     to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback():
+     when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+     and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback()
+     */
+
+  /* Abort the SPI DMA tx Stream */
+  if(hspi->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(hspi->hdmatx);
+  }
+  /* Abort the SPI DMA rx Stream */
+  if(hspi->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(hspi->hdmarx);
+  }
+
+  /* Disable the SPI DMA Tx & Rx requests */
+  hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+  hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+
+  hspi->State = HAL_SPI_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles SPI interrupt request.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval HAL status
+  */
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi)
+{
+  uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0;
+
+  tmp1 = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE);
+  tmp2 = __HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_RXNE);
+  tmp3 = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_OVR);
+  /* SPI in mode Receiver and Overrun not occurred ---------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET) && (tmp3 == RESET))
+  {
+    hspi->RxISR(hspi);
+    return;
+  }
+
+  tmp1 = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE);
+  tmp2 = __HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_TXE);
+  /* SPI in mode Transmitter ---------------------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    hspi->TxISR(hspi);
+    return;
+  }
+
+  if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_ERR) != RESET)
+  {
+    /* SPI CRC error interrupt occurred ---------------------------------------*/
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+      __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+    }
+    /* SPI Mode Fault error interrupt occurred --------------------------------*/
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_MODF) != RESET)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_MODF;
+      __HAL_SPI_CLEAR_MODFFLAG(hspi);
+    }
+
+    /* SPI Overrun error interrupt occurred -----------------------------------*/
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_OVR) != RESET)
+    {
+      if(hspi->State != HAL_SPI_STATE_BUSY_TX)
+      {
+        hspi->ErrorCode |= HAL_SPI_ERROR_OVR;
+        __HAL_SPI_CLEAR_OVRFLAG(hspi);
+      }
+    }
+
+    /* SPI Frame error interrupt occurred -------------------------------------*/
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_FRE) != RESET)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FRE;
+      __HAL_SPI_CLEAR_FREFLAG(hspi);
+    }
+
+    /* Call the Error call Back in case of Errors */
+    if(hspi->ErrorCode!=HAL_SPI_ERROR_NONE)
+    {
+      hspi->State = HAL_SPI_STATE_READY;
+      HAL_SPI_ErrorCallback(hspi);
+    }
+  }
+}
+
+/**
+  * @brief Tx Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_RxCpltCallback() could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx and Rx Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_TxRxCpltCallback() could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx Half Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_TxHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Half Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_RxHalfCpltCallback() could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx and Rx Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_TxRxHalfCpltCallback() could be implemented in the user file
+   */
+}
+
+/**
+  * @brief SPI error callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+ __weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : - This function Should not be modified, when the callback is needed,
+            the HAL_SPI_ErrorCallback() could be implemented in the user file.
+            - The ErrorCode parameter in the hspi handle is updated by the SPI processes
+            and user can use HAL_SPI_GetError() API to check the latest error occurred.
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions
+  *  @brief   SPI control functions
+  *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the SPI.
+     (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral
+     (+) HAL_SPI_GetError() check in run-time Errors occurring during communication
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the SPI state
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval HAL state
+  */
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi)
+{
+  return hspi->State;
+}
+
+/**
+  * @brief  Return the SPI error code
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval SPI Error Code
+  */
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi)
+{
+  return hspi->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+  /**
+  * @brief  Interrupt Handler to close Tx transfer
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval void
+  */
+static void SPI_TxCloseIRQHandler(SPI_HandleTypeDef *hspi)
+{
+  /* Wait until TXE flag is set to send data */
+  if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
+  {
+    hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+  }
+
+  /* Disable TXE interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE ));
+
+  /* Disable ERR interrupt if Receive process is finished */
+  if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_RXNE) == RESET)
+  {
+    __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_ERR));
+
+    /* Wait until Busy flag is reset before disabling SPI */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    }
+
+    /* Clear OVERRUN flag in 2 Lines communication mode because received is not read */
+    if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+    {
+      __HAL_SPI_CLEAR_OVRFLAG(hspi);
+    }
+
+    /* Check if Errors has been detected during transfer */
+    if(hspi->ErrorCode ==  HAL_SPI_ERROR_NONE)
+    {
+      /* Check if we are in Tx or in Rx/Tx Mode */
+      if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX)
+      {
+        /* Set state to READY before run the Callback Complete */
+        hspi->State = HAL_SPI_STATE_READY;
+        HAL_SPI_TxRxCpltCallback(hspi);
+      }
+      else
+      {
+        /* Set state to READY before run the Callback Complete */
+        hspi->State = HAL_SPI_STATE_READY;
+        HAL_SPI_TxCpltCallback(hspi);
+      }
+    }
+    else
+    {
+      /* Set state to READY before run the Callback Complete */
+      hspi->State = HAL_SPI_STATE_READY;
+      /* Call Error call back in case of Error */
+      HAL_SPI_ErrorCallback(hspi);
+    }
+  }
+}
+
+/**
+  * @brief  Interrupt Handler to transmit amount of data in no-blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval void
+  */
+static void SPI_TxISR(SPI_HandleTypeDef *hspi)
+{
+  /* Transmit data in 8 Bit mode */
+  if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+  {
+    hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+  }
+  /* Transmit data in 16 Bit mode */
+  else
+  {
+    hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+    hspi->pTxBuffPtr+=2;
+  }
+  hspi->TxXferCount--;
+
+  if(hspi->TxXferCount == 0)
+  {
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      /* calculate and transfer CRC on Tx line */
+      hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+    }
+    SPI_TxCloseIRQHandler(hspi);
+  }
+}
+
+/**
+  * @brief  Interrupt Handler to close Rx transfer
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval void
+  */
+static void SPI_RxCloseIRQHandler(SPI_HandleTypeDef *hspi)
+{
+  __IO uint16_t tmpreg;
+
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    /* Wait until RXNE flag is set to send data */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    }
+
+    /* Read CRC to reset RXNE flag */
+    tmpreg = hspi->Instance->DR;
+    UNUSED(tmpreg);
+
+    /* Wait until RXNE flag is set to send data */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    }
+
+    /* Check if CRC error occurred */
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+
+      /* Reset CRC Calculation */
+      SPI_RESET_CRC(hspi);
+    }
+  }
+
+  /* Disable RXNE and ERR interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE));
+
+  /* if Transmit process is finished */
+  if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_TXE) == RESET)
+  {
+    /* Disable ERR interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_ERR));
+
+    if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+    {
+      /* Disable SPI peripheral */
+      __HAL_SPI_DISABLE(hspi);
+    }
+
+    /* Check if Errors has been detected during transfer */
+    if(hspi->ErrorCode ==  HAL_SPI_ERROR_NONE)
+    {
+      /* Check if we are in Rx or in Rx/Tx Mode */
+      if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX)
+      {
+        /* Set state to READY before run the Callback Complete */
+        hspi->State = HAL_SPI_STATE_READY;
+        HAL_SPI_TxRxCpltCallback(hspi);
+      }
+      else
+      {
+        /* Set state to READY before run the Callback Complete */
+        hspi->State = HAL_SPI_STATE_READY;
+        HAL_SPI_RxCpltCallback(hspi);
+      }
+    }
+    else
+    {
+      /* Set state to READY before run the Callback Complete */
+      hspi->State = HAL_SPI_STATE_READY;
+      /* Call Error call back in case of Error */
+      HAL_SPI_ErrorCallback(hspi);
+    }
+  }
+}
+
+/**
+  * @brief  Interrupt Handler to receive amount of data in 2Lines mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval void
+  */
+static void SPI_2LinesRxISR(SPI_HandleTypeDef *hspi)
+{
+  /* Receive data in 8 Bit mode */
+  if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+  {
+    (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
+  }
+  /* Receive data in 16 Bit mode */
+  else
+  {
+    *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+    hspi->pRxBuffPtr+=2;
+  }
+  hspi->RxXferCount--;
+
+  if(hspi->RxXferCount==0)
+  {
+    SPI_RxCloseIRQHandler(hspi);
+  }
+}
+
+/**
+  * @brief  Interrupt Handler to receive amount of data in no-blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval void
+  */
+static void SPI_RxISR(SPI_HandleTypeDef *hspi)
+{
+  /* Receive data in 8 Bit mode */
+  if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+  {
+    (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
+  }
+  /* Receive data in 16 Bit mode */
+  else
+  {
+    *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+    hspi->pRxBuffPtr+=2;
+  }
+    hspi->RxXferCount--;
+
+  /* Enable CRC Transmission */
+  if((hspi->RxXferCount == 1) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+  {
+    /* Set CRC Next to calculate CRC on Rx side */
+    hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+  }
+
+  if(hspi->RxXferCount == 0)
+  {
+    SPI_RxCloseIRQHandler(hspi);
+  }
+}
+
+/**
+  * @brief DMA SPI transmit process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* DMA Normal Mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    /* Wait until TXE flag is set to send data */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    }
+    /* Disable Tx DMA Request */
+    hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+
+    /* Wait until Busy flag is reset before disabling SPI */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    }
+
+    hspi->TxXferCount = 0;
+
+    hspi->State = HAL_SPI_STATE_READY;
+  }
+
+  /* Clear OVERRUN flag in 2 Lines communication mode because received is not read */
+  if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+  {
+   __HAL_SPI_CLEAR_OVRFLAG(hspi);
+  }
+
+  /* Check if Errors has been detected during transfer */
+  if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+  {
+    HAL_SPI_ErrorCallback(hspi);
+  }
+  else
+  {
+    HAL_SPI_TxCpltCallback(hspi);
+  }
+}
+
+/**
+  * @brief DMA SPI receive process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  __IO uint16_t tmpreg;
+
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  /* DMA Normal mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    if((hspi->Init.Direction == SPI_DIRECTION_2LINES)&&(hspi->Init.Mode == SPI_MODE_MASTER))
+    {
+       SPI_DMAEndTransmitReceive(hspi);
+    }
+    /* SPI_DIRECTION_1LINE or SPI_DIRECTION_2LINES_RXONLY */
+    else
+    {
+      if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+      {
+        /* Disable SPI peripheral */
+        __HAL_SPI_DISABLE(hspi);
+      }
+
+      /* Disable Rx DMA Request */
+      hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+
+      hspi->RxXferCount = 0;
+
+      /* Reset CRC Calculation */
+      if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+      {
+        /* Wait until RXNE flag is set to send data */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
+        {
+          hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+        }
+
+        /* Read CRC */
+        tmpreg = hspi->Instance->DR;
+        UNUSED(tmpreg);
+
+        /* Wait until RXNE flag is set */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
+        {
+          hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+        }
+
+        /* Check if CRC error occurred */
+        if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+        {
+          hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+          __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+        }
+      }
+    }
+
+    hspi->State = HAL_SPI_STATE_READY;
+
+    /* Check if Errors has been detected during transfer */
+    if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+    {
+      HAL_SPI_ErrorCallback(hspi);
+    }
+    else
+    {
+      HAL_SPI_RxCpltCallback(hspi);
+    }
+  }
+  else
+  {
+    HAL_SPI_RxCpltCallback(hspi);
+  }
+}
+
+/**
+  * @brief End DMA SPI transmit receive process
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_DMAEndTransmitReceive(SPI_HandleTypeDef *hspi)
+{
+  __IO uint16_t tmpreg;
+
+  /* Reset CRC Calculation */
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    /* Check if CRC is done on going (RXNE flag set) */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) == HAL_OK)
+    {
+      /* Wait until RXNE flag is set to send data */
+      if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
+      {
+        hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+      }
+    }
+    /* Read CRC */
+    tmpreg = hspi->Instance->DR;
+    UNUSED(tmpreg);
+
+    /* Check if CRC error occurred */
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+      __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+    }
+  }
+
+  /* Wait until TXE flag is set to send data */
+  if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
+  {
+    hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+  }
+  /* Disable Tx DMA Request */
+  hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+
+  /* Wait until Busy flag is reset before disabling SPI */
+  if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
+  {
+    hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+  }
+
+  /* Disable Rx DMA Request */
+  hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+
+  hspi->TxXferCount = 0;
+  hspi->RxXferCount = 0;
+}
+
+/**
+  * @brief DMA SPI transmit receive process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  { /**/
+    SPI_DMAEndTransmitReceive(hspi);
+
+    hspi->State = HAL_SPI_STATE_READY;
+
+    /* Check if Errors has been detected during transfer */
+    if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+    {
+      HAL_SPI_ErrorCallback(hspi);
+    }
+    else
+    {
+      HAL_SPI_TxRxCpltCallback(hspi);
+    }
+  }
+  else
+  {
+    HAL_SPI_TxRxCpltCallback(hspi);
+  }
+}
+
+/**
+  * @brief DMA SPI half transmit process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_SPI_TxHalfCpltCallback(hspi);
+}
+
+/**
+  * @brief DMA SPI half receive process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_SPI_RxHalfCpltCallback(hspi);
+}
+
+/**
+  * @brief DMA SPI Half transmit receive process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_SPI_TxRxHalfCpltCallback(hspi);
+}
+
+/**
+  * @brief DMA SPI communication error callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAError(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = (SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hspi->TxXferCount = 0;
+  hspi->RxXferCount = 0;
+  hspi->State= HAL_SPI_STATE_READY;
+  hspi->ErrorCode |= HAL_SPI_ERROR_DMA;
+  HAL_SPI_ErrorCallback(hspi);
+}
+
+/**
+  * @brief This function handles SPI Communication Timeout.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  Flag: SPI flag to check
+  * @param  Status: Flag status to check: RESET or set
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SPI_WaitOnFlagUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_SPI_GET_FLAG(hspi, Flag) == RESET)
+    {
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable the SPI and reset the CRC: the CRC value should be cleared
+             on both master and slave sides in order to resynchronize the master
+             and slave for their respective CRC calculation */
+
+          /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+          __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+          /* Disable SPI peripheral */
+          __HAL_SPI_DISABLE(hspi);
+
+          /* Reset CRC Calculation */
+          if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+          {
+            SPI_RESET_CRC(hspi);
+          }
+
+          hspi->State= HAL_SPI_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hspi);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_SPI_GET_FLAG(hspi, Flag) != RESET)
+    {
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable the SPI and reset the CRC: the CRC value should be cleared
+             on both master and slave sides in order to resynchronize the master
+             and slave for their respective CRC calculation */
+
+          /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+          __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+          /* Disable SPI peripheral */
+          __HAL_SPI_DISABLE(hspi);
+
+          /* Reset CRC Calculation */
+          if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+          {
+            SPI_RESET_CRC(hspi);
+          }
+
+          hspi->State= HAL_SPI_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hspi);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+
+/**
+  * @}
+  */
+
+#endif /* HAL_SPI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c
new file mode 100644
index 0000000..6cb0a7f
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c
@@ -0,0 +1,682 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_sram.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   SRAM HAL module driver.
+  *          This file provides a generic firmware to drive SRAM memories
+  *          mounted as external device.
+  *
+  @verbatim
+  ==============================================================================
+                          ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    This driver is a generic layered driver which contains a set of APIs used to
+    control SRAM memories. It uses the FMC layer functions to interface
+    with SRAM devices.
+    The following sequence should be followed to configure the FMC/FSMC to interface
+    with SRAM/PSRAM memories:
+
+   (#) Declare a SRAM_HandleTypeDef handle structure, for example:
+          SRAM_HandleTypeDef  hsram; and:
+
+       (++) Fill the SRAM_HandleTypeDef handle "Init" field with the allowed
+            values of the structure member.
+
+       (++) Fill the SRAM_HandleTypeDef handle "Instance" field with a predefined
+            base register instance for NOR or SRAM device
+
+       (++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined
+            base register instance for NOR or SRAM extended mode
+
+   (#) Declare two FMC_NORSRAM_TimingTypeDef structures, for both normal and extended
+       mode timings; for example:
+          FMC_NORSRAM_TimingTypeDef  Timing and FMC_NORSRAM_TimingTypeDef  ExTiming;
+      and fill its fields with the allowed values of the structure member.
+
+   (#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function
+       performs the following sequence:
+
+       (##) MSP hardware layer configuration using the function HAL_SRAM_MspInit()
+       (##) Control register configuration using the FMC NORSRAM interface function
+            FMC_NORSRAM_Init()
+       (##) Timing register configuration using the FMC NORSRAM interface function
+            FMC_NORSRAM_Timing_Init()
+       (##) Extended mode Timing register configuration using the FMC NORSRAM interface function
+            FMC_NORSRAM_Extended_Timing_Init()
+       (##) Enable the SRAM device using the macro __FMC_NORSRAM_ENABLE()
+
+   (#) At this stage you can perform read/write accesses from/to the memory connected
+       to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the
+       following APIs:
+       (++) HAL_SRAM_Read()/HAL_SRAM_Write() for polling read/write access
+       (++) HAL_SRAM_Read_DMA()/HAL_SRAM_Write_DMA() for DMA read/write transfer
+
+   (#) You can also control the SRAM device by calling the control APIs HAL_SRAM_WriteOperation_Enable()/
+       HAL_SRAM_WriteOperation_Disable() to respectively enable/disable the SRAM write operation
+
+   (#) You can continuously monitor the SRAM device HAL state by calling the function
+       HAL_SRAM_GetState()
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SRAM SRAM
+  * @brief SRAM driver modules
+  * @{
+  */
+#ifdef HAL_SRAM_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+	defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SRAM_Exported_Functions SRAM Exported Functions
+  * @{
+  */
+/** @defgroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief    Initialization and Configuration functions
+  *
+  @verbatim
+  ==============================================================================
+           ##### SRAM Initialization and de_initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to initialize/de-initialize
+          the SRAM memory
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Performs the SRAM device initialization sequence
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  Timing: Pointer to SRAM control timing structure
+  * @param  ExtTiming: Pointer to SRAM extended mode timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming)
+{
+  /* Check the SRAM handle parameter */
+  if(hsram == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  if(hsram->State == HAL_SRAM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hsram->Lock = HAL_UNLOCKED;
+    /* Initialize the low level hardware (MSP) */
+    HAL_SRAM_MspInit(hsram);
+  }
+
+  /* Initialize SRAM control Interface */
+  FMC_NORSRAM_Init(hsram->Instance, &(hsram->Init));
+
+  /* Initialize SRAM timing Interface */
+  FMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank);
+
+  /* Initialize SRAM extended mode timing Interface */
+  FMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank,  hsram->Init.ExtendedMode);
+
+  /* Enable the NORSRAM device */
+  __FMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Performs the SRAM device De-initialization sequence.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram)
+{
+  /* De-Initialize the low level hardware (MSP) */
+  HAL_SRAM_MspDeInit(hsram);
+
+  /* Configure the SRAM registers with their reset values */
+  FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank);
+
+  hsram->State = HAL_SRAM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hsram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  SRAM MSP Init.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval None
+  */
+__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SRAM_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  SRAM MSP DeInit.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval None
+  */
+__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SRAM_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DMA transfer complete callback.
+  * @param  hdma: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval None
+  */
+__weak void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SRAM_DMA_XferCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DMA transfer complete error callback.
+  * @param  hdma: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval None
+  */
+__weak void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SRAM_DMA_XferErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SRAM_Exported_Functions_Group2 Input and Output functions
+  * @brief    Input Output and memory control functions
+  *
+  @verbatim
+  ==============================================================================
+                  ##### SRAM Input and Output functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to use and control the SRAM memory
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Reads 8-bit buffer from SRAM memory.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize)
+{
+  __IO uint8_t * pSramAddress = (uint8_t *)pAddress;
+
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;
+
+  /* Read data from memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *pDstBuffer = *(__IO uint8_t *)pSramAddress;
+    pDstBuffer++;
+    pSramAddress++;
+  }
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Writes 8-bit buffer to SRAM memory.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize)
+{
+  __IO uint8_t * pSramAddress = (uint8_t *)pAddress;
+
+  /* Check the SRAM controller state */
+  if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;
+
+  /* Write data to memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *(__IO uint8_t *)pSramAddress = *pSrcBuffer;
+    pSrcBuffer++;
+    pSramAddress++;
+  }
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reads 16-bit buffer from SRAM memory.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize)
+{
+  __IO uint16_t * pSramAddress = (uint16_t *)pAddress;
+
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;
+
+  /* Read data from memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *pDstBuffer = *(__IO uint16_t *)pSramAddress;
+    pDstBuffer++;
+    pSramAddress++;
+  }
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Writes 16-bit buffer to SRAM memory.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize)
+{
+  __IO uint16_t * pSramAddress = (uint16_t *)pAddress;
+
+  /* Check the SRAM controller state */
+  if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;
+
+  /* Write data to memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *(__IO uint16_t *)pSramAddress = *pSrcBuffer;
+    pSrcBuffer++;
+    pSramAddress++;
+  }
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reads 32-bit buffer from SRAM memory.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;
+
+  /* Read data from memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *pDstBuffer = *(__IO uint32_t *)pAddress;
+    pDstBuffer++;
+    pAddress++;
+  }
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Writes 32-bit buffer to SRAM memory.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+  /* Check the SRAM controller state */
+  if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;
+
+  /* Write data to memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *(__IO uint32_t *)pAddress = *pSrcBuffer;
+    pSrcBuffer++;
+    pAddress++;
+  }
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reads a Words data from the SRAM memory using DMA transfer.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;
+
+  /* Configure DMA user callbacks */
+  hsram->hdma->XferCpltCallback  = HAL_SRAM_DMA_XferCpltCallback;
+  hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;
+
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Writes a Words data buffer to SRAM memory using DMA transfer.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+  /* Check the SRAM controller state */
+  if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+  {
+    return  HAL_ERROR;
+  }
+
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;
+
+  /* Configure DMA user callbacks */
+  hsram->hdma->XferCpltCallback  = HAL_SRAM_DMA_XferCpltCallback;
+  hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;
+
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SRAM_Exported_Functions_Group3 Control functions
+ *  @brief   management functions
+ *
+ at verbatim
+  ==============================================================================
+                        ##### SRAM Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the SRAM interface.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables dynamically SRAM write operation.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+
+  /* Enable write operation */
+  FMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically SRAM write operation.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;
+
+  /* Disable write operation */
+  FMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_PROTECTED;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SRAM_Exported_Functions_Group4 State functions
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### SRAM State functions #####
+  ==============================================================================
+  [..]
+    This subsection permits to get in run-time the status of the SRAM controller
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the SRAM controller state
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval HAL state
+  */
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram)
+{
+  return hsram->State;
+}
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+#endif /* HAL_SRAM_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c
new file mode 100644
index 0000000..c1ade71
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c
@@ -0,0 +1,5335 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_tim.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   TIM HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Timer (TIM) peripheral:
+  *           + Time Base Initialization
+  *           + Time Base Start
+  *           + Time Base Start Interruption
+  *           + Time Base Start DMA
+  *           + Time Output Compare/PWM Initialization
+  *           + Time Output Compare/PWM Channel Configuration
+  *           + Time Output Compare/PWM  Start
+  *           + Time Output Compare/PWM  Start Interruption
+  *           + Time Output Compare/PWM Start DMA
+  *           + Time Input Capture Initialization
+  *           + Time Input Capture Channel Configuration
+  *           + Time Input Capture Start
+  *           + Time Input Capture Start Interruption
+  *           + Time Input Capture Start DMA
+  *           + Time One Pulse Initialization
+  *           + Time One Pulse Channel Configuration
+  *           + Time One Pulse Start
+  *           + Time Encoder Interface Initialization
+  *           + Time Encoder Interface Start
+  *           + Time Encoder Interface Start Interruption
+  *           + Time Encoder Interface Start DMA
+  *           + Commutation Event configuration with Interruption and DMA
+  *           + Time OCRef clear configuration
+  *           + Time External Clock configuration
+  @verbatim
+  ==============================================================================
+                      ##### TIMER Generic features #####
+  ==============================================================================
+  [..] The Timer features include:
+       (#) 16-bit up, down, up/down auto-reload counter.
+       (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
+           counter clock frequency either by any factor between 1 and 65536.
+       (#) Up to 4 independent channels for:
+           (++) Input Capture
+           (++) Output Compare
+           (++) PWM generation (Edge and Center-aligned Mode)
+           (++) One-pulse mode output
+
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+     (#) Initialize the TIM low level resources by implementing the following functions
+         depending from feature used :
+           (++) Time Base : HAL_TIM_Base_MspInit()
+           (++) Input Capture : HAL_TIM_IC_MspInit()
+           (++) Output Compare : HAL_TIM_OC_MspInit()
+           (++) PWM generation : HAL_TIM_PWM_MspInit()
+           (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+           (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
+
+     (#) Initialize the TIM low level resources :
+        (##) Enable the TIM interface clock using __TIMx_CLK_ENABLE();
+        (##) TIM pins configuration
+            (+++) Enable the clock for the TIM GPIOs using the following function:
+                 __GPIOx_CLK_ENABLE();
+            (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+     (#) The external Clock can be configured, if needed (the default clock is the
+         internal clock from the APBx), using the following function:
+         HAL_TIM_ConfigClockSource, the clock configuration should be done before
+         any start function.
+
+     (#) Configure the TIM in the desired functioning mode using one of the
+         initialization function of this driver:
+         (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
+         (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
+              Output Compare signal.
+         (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
+              PWM signal.
+         (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
+              external signal.
+         (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
+              in One Pulse Mode.
+         (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
+
+     (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
+           (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
+           (++) Input Capture :  HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
+           (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
+           (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
+           (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
+           (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
+
+     (#) The DMA Burst is managed with the two following functions:
+         HAL_TIM_DMABurst_WriteStart()
+         HAL_TIM_DMABurst_ReadStart()
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup TIM TIM
+  * @brief TIM HAL module driver
+  * @{
+  */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup TIM_Private_Functions
+  * @{
+  */
+/* Private function prototypes -----------------------------------------------*/
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter);
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter);
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter);
+
+static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+                       uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+
+static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t TIM_ITRx);
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+                                     TIM_SlaveConfigTypeDef * sSlaveConfig);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Functions TIM Exported Functions
+  * @{
+  */
+
+/** @defgroup TIM_Exported_Functions_Group1 Time Base functions
+ *  @brief    Time Base functions
+ *
+ at verbatim
+  ==============================================================================
+              ##### Time Base functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM base.
+    (+) De-initialize the TIM base.
+    (+) Start the Time Base.
+    (+) Stop the Time Base.
+    (+) Start the Time Base and enable interrupt.
+    (+) Stop the Time Base and disable interrupt.
+    (+) Start the Time Base and enable DMA transfer.
+    (+) Stop the Time Base and disable DMA transfer.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Time base Unit according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, NVIC */
+    HAL_TIM_Base_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Set the Time Base configuration */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM Base peripheral
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIM_Base_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Base MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_Base_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Base MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_Base_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Base generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Change the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Base generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Base generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  /* Enable the TIM Update interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Base generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  /* Disable the TIM Update interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Base generation in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  pData: The source Buffer address.
+  * @param  Length: The length of data to be transferred from memory to peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((pData == 0 ) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  /* Set the DMA Period elapsed callback */
+  htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+  /* Set the DMA error callback */
+  htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
+
+  /* Enable the TIM Update DMA request */
+  __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Base generation in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+  /* Disable the TIM Update DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions
+ *  @brief    Time Output Compare functions
+ *
+ at verbatim
+  ==============================================================================
+                  ##### Time Output Compare functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM Output Compare.
+    (+) De-initialize the TIM Output Compare.
+    (+) Start the Time Output Compare.
+    (+) Stop the Time Output Compare.
+    (+) Start the Time Output Compare and enable interrupt.
+    (+) Stop the Time Output Compare and disable interrupt.
+    (+) Start the Time Output Compare and enable DMA transfer.
+    (+) Stop the Time Output Compare and disable DMA transfer.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Output Compare according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_OC_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Init the base time for the Output Compare */
+  TIM_Base_SetConfig(htim->Instance,  &htim->Init);
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM peripheral
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+   htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_TIM_OC_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Output Compare MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_OC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Output Compare MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_OC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Enable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Disable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData: The source Buffer address.
+  * @param  Length: The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if(((uint32_t)pData == 0 ) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+      /* Enable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+      /* Enable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+     /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+      /* Enable the TIM Capture/Compare 4 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions
+ *  @brief    Time PWM functions
+ *
+ at verbatim
+  ==============================================================================
+                          ##### Time PWM functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM OPWM.
+    (+) De-initialize the TIM PWM.
+    (+) Start the Time PWM.
+    (+) Stop the Time PWM.
+    (+) Start the Time PWM and enable interrupt.
+    (+) Stop the Time PWM and disable interrupt.
+    (+) Start the Time PWM and enable DMA transfer.
+    (+) Stop the Time PWM and disable DMA transfer.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM PWM Time Base according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_PWM_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Init the base time for the PWM */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM peripheral
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_TIM_PWM_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM PWM MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_PWM_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM PWM MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_PWM_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the PWM signal generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Enable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the PWM signal generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Disable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the PWM signal generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the PWM signal generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM PWM signal generation in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData: The source Buffer address.
+  * @param  Length: The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if(((uint32_t)pData == 0 ) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+      /* Enable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+      /* Enable the TIM Output Capture/Compare 3 request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+     /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+      /* Enable the TIM Capture/Compare 4 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM PWM signal generation in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions
+ *  @brief    Time Input Capture functions
+ *
+ at verbatim
+  ==============================================================================
+              ##### Time Input Capture functions #####
+  ==============================================================================
+ [..]
+   This section provides functions allowing to:
+   (+) Initialize and configure the TIM Input Capture.
+   (+) De-initialize the TIM Input Capture.
+   (+) Start the Time Input Capture.
+   (+) Stop the Time Input Capture.
+   (+) Start the Time Input Capture and enable interrupt.
+   (+) Stop the Time Input Capture and disable interrupt.
+   (+) Start the Time Input Capture and enable DMA transfer.
+   (+) Stop the Time Input Capture and disable DMA transfer.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Input Capture Time base according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_IC_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Init the base time for the input capture */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM peripheral
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_TIM_IC_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM INput Capture MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_IC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Input Capture MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_IC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Input Capture measurement.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Enable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Input Capture measurement.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Disable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Input Capture measurement in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+  /* Enable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Input Capture measurement in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Input Capture measurement on in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData: The destination Buffer address.
+  * @param  Length: The length of data to be transferred from TIM peripheral to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((pData == 0 ) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
+
+      /* Enable the TIM Capture/Compare 2  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
+
+      /* Enable the TIM Capture/Compare 3  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
+
+      /* Enable the TIM Capture/Compare 4  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Input Capture measurement on in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3  DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4  DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions
+ *  @brief    Time One Pulse functions
+ *
+ at verbatim
+  ==============================================================================
+                        ##### Time One Pulse functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM One Pulse.
+    (+) De-initialize the TIM One Pulse.
+    (+) Start the Time One Pulse.
+    (+) Stop the Time One Pulse.
+    (+) Start the Time One Pulse and enable interrupt.
+    (+) Stop the Time One Pulse and disable interrupt.
+    (+) Start the Time One Pulse and enable DMA transfer.
+    (+) Stop the Time One Pulse and disable DMA transfer.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM One Pulse Time Base according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OnePulseMode: Select the One pulse mode.
+  *         This parameter can be one of the following values:
+  *            @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
+  *            @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  assert_param(IS_TIM_OPM_MODE(OnePulseMode));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_OnePulse_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Configure the Time base in the One Pulse Mode */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Reset the OPM Bit */
+  htim->Instance->CR1 &= ~TIM_CR1_OPM;
+
+  /* Configure the OPM Mode */
+  htim->Instance->CR1 |= OnePulseMode;
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM One Pulse
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIM_OnePulse_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM One Pulse MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_OnePulse_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM One Pulse MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel : TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Enable the Capture compare and the Input Capture channels
+    (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+    if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+    if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+    in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+    No need to enable the counter, it's enabled automatically by hardware
+    (the counter starts in response to a stimulus and generate a pulse */
+
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel : TIM Channels to be disable.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Disable the Capture compare and the Input Capture channels
+  (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+  if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+  if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+  in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel : TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Enable the Capture compare and the Input Capture channels
+    (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+    if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+    if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+    in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+    No need to enable the counter, it's enabled automatically by hardware
+    (the counter starts in response to a stimulus and generate a pulse */
+
+  /* Enable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+  /* Enable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel : TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Disable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+  /* Disable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+  /* Disable the Capture compare and the Input Capture channels
+  (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+  if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+  if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+  in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+   __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions
+ *  @brief    Time Encoder functions
+ *
+ at verbatim
+  ==============================================================================
+                          ##### Time Encoder functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM Encoder.
+    (+) De-initialize the TIM Encoder.
+    (+) Start the Time Encoder.
+    (+) Stop the Time Encoder.
+    (+) Start the Time Encoder and enable interrupt.
+    (+) Stop the Time Encoder and disable interrupt.
+    (+) Start the Time Encoder and enable DMA transfer.
+    (+) Stop the Time Encoder and disable DMA transfer.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Encoder Interface and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sConfig: TIM Encoder Interface configuration structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim,  TIM_Encoder_InitTypeDef* sConfig)
+{
+  uint32_t tmpsmcr = 0;
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
+  assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
+  assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
+  assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+  assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_Encoder_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Reset the SMS bits */
+  htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+
+  /* Configure the Time base in the Encoder Mode */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = htim->Instance->SMCR;
+
+  /* Get the TIMx CCMR1 register value */
+  tmpccmr1 = htim->Instance->CCMR1;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = htim->Instance->CCER;
+
+  /* Set the encoder Mode */
+  tmpsmcr |= sConfig->EncoderMode;
+
+  /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+  tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
+  tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8));
+
+  /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
+  tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
+  tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
+  tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8);
+  tmpccmr1 |= (sConfig->IC1Filter << 4) | (sConfig->IC2Filter << 12);
+
+  /* Set the TI1 and the TI2 Polarities */
+  tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
+  tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
+  tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4);
+
+  /* Write to TIMx SMCR */
+  htim->Instance->SMCR = tmpsmcr;
+
+  /* Write to TIMx CCMR1 */
+  htim->Instance->CCMR1 = tmpccmr1;
+
+  /* Write to TIMx CCER */
+  htim->Instance->CCER = tmpccer;
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM Encoder interface
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIM_Encoder_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Encoder Interface MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_Encoder_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Encoder Interface MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Encoder Interface.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+  /* Enable the encoder interface channels */
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      break;
+    }
+    case TIM_CHANNEL_2:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+      break;
+    }
+    default :
+    {
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+     break;
+    }
+  }
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Encoder Interface.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+    assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+   /* Disable the Input Capture channels 1 and 2
+    (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+      break;
+    }
+    case TIM_CHANNEL_2:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+      break;
+    }
+    default :
+    {
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+     break;
+    }
+  }
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Encoder Interface in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+  /* Enable the encoder interface channels */
+  /* Enable the capture compare Interrupts 1 and/or 2 */
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+      break;
+    }
+    case TIM_CHANNEL_2:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+      break;
+    }
+    default :
+    {
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+     __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+     __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+     break;
+    }
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Encoder Interface in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channels 1 and 2
+    (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+  if(Channel == TIM_CHANNEL_1)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare Interrupts 1 */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+  }
+  else if(Channel == TIM_CHANNEL_2)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare Interrupts 2 */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+  }
+  else
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare Interrupts 1 and 2 */
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Encoder Interface in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @param  pData1: The destination Buffer address for IC1.
+  * @param  pData2: The destination Buffer address for IC2.
+  * @param  Length: The length of data to be transferred from TIM peripheral to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((((pData1 == 0) || (pData2 == 0) )) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length);
+
+      /* Enable the TIM Input Capture DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+      /* Enable the Peripheral */
+      __HAL_TIM_ENABLE(htim);
+
+      /* Enable the Capture compare channel */
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+      /* Enable the TIM Input Capture  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+
+      /* Enable the Peripheral */
+      __HAL_TIM_ENABLE(htim);
+
+      /* Enable the Capture compare channel */
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+    }
+    break;
+
+    case TIM_CHANNEL_ALL:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
+
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+     /* Enable the Peripheral */
+      __HAL_TIM_ENABLE(htim);
+
+      /* Enable the Capture compare channel */
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+      /* Enable the TIM Input Capture  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+      /* Enable the TIM Input Capture  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    default:
+    break;
+  }
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Encoder Interface in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channels 1 and 2
+    (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+  if(Channel == TIM_CHANNEL_1)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare DMA Request 1 */
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+  }
+  else if(Channel == TIM_CHANNEL_2)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare DMA Request 2 */
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+  }
+  else
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare DMA Request 1 and 2 */
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ *  @brief    IRQ handler management
+ *
+ at verbatim
+  ==============================================================================
+                        ##### IRQ handler management #####
+  ==============================================================================
+  [..]
+    This section provides Timer IRQ handler function.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  This function handles TIM interrupts requests.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
+{
+  /* Capture compare 1 event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET)
+    {
+      {
+        __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
+        htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+        /* Input capture event */
+        if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00)
+        {
+          HAL_TIM_IC_CaptureCallback(htim);
+        }
+        /* Output compare event */
+        else
+        {
+          HAL_TIM_OC_DelayElapsedCallback(htim);
+          HAL_TIM_PWM_PulseFinishedCallback(htim);
+        }
+        htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+      }
+    }
+  }
+  /* Capture compare 2 event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+      /* Input capture event */
+      if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00)
+      {
+        HAL_TIM_IC_CaptureCallback(htim);
+      }
+      /* Output compare event */
+      else
+      {
+        HAL_TIM_OC_DelayElapsedCallback(htim);
+        HAL_TIM_PWM_PulseFinishedCallback(htim);
+      }
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+    }
+  }
+  /* Capture compare 3 event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+      /* Input capture event */
+      if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00)
+      {
+        HAL_TIM_IC_CaptureCallback(htim);
+      }
+      /* Output compare event */
+      else
+      {
+        HAL_TIM_OC_DelayElapsedCallback(htim);
+        HAL_TIM_PWM_PulseFinishedCallback(htim);
+      }
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+    }
+  }
+  /* Capture compare 4 event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+      /* Input capture event */
+      if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00)
+      {
+        HAL_TIM_IC_CaptureCallback(htim);
+      }
+      /* Output compare event */
+      else
+      {
+        HAL_TIM_OC_DelayElapsedCallback(htim);
+        HAL_TIM_PWM_PulseFinishedCallback(htim);
+      }
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+    }
+  }
+  /* TIM Update event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
+      HAL_TIM_PeriodElapsedCallback(htim);
+    }
+  }
+  /* TIM Break input event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
+      HAL_TIMEx_BreakCallback(htim);
+    }
+  }
+  /* TIM Trigger detection event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
+      HAL_TIM_TriggerCallback(htim);
+    }
+  }
+  /* TIM commutation event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM);
+      HAL_TIMEx_CommutationCallback(htim);
+    }
+  }
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ *  @brief   	Peripheral Control functions
+ *
+ at verbatim
+  ==============================================================================
+                   ##### Peripheral Control functions #####
+  ==============================================================================
+ [..]
+   This section provides functions allowing to:
+   (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+   (+) Configure External Clock source.
+   (+) Configure Complementary channels, break features and dead time.
+   (+) Configure Master and the Slave synchronization.
+   (+) Configure the DMA Burst Mode.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the TIM Output Compare Channels according to the specified
+  *         parameters in the TIM_OC_InitTypeDef.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sConfig: TIM Output Compare configuration structure
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CHANNELS(Channel));
+  assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+  assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+  assert_param(IS_TIM_OCN_POLARITY(sConfig->OCNPolarity));
+  assert_param(IS_TIM_OCNIDLE_STATE(sConfig->OCNIdleState));
+  assert_param(IS_TIM_OCIDLE_STATE(sConfig->OCIdleState));
+
+  /* Check input state */
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      /* Configure the TIM Channel 1 in Output Compare */
+      TIM_OC1_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      /* Configure the TIM Channel 2 in Output Compare */
+      TIM_OC2_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+       assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+      /* Configure the TIM Channel 3 in Output Compare */
+      TIM_OC3_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+      /* Configure the TIM Channel 4 in Output Compare */
+      TIM_OC4_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+
+    default:
+    break;
+  }
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Input Capture Channels according to the specified
+  *         parameters in the TIM_IC_InitTypeDef.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sConfig: TIM Input Capture configuration structure
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
+  assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
+  assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
+
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  if (Channel == TIM_CHANNEL_1)
+  {
+    /* TI1 Configuration */
+    TIM_TI1_SetConfig(htim->Instance,
+               sConfig->ICPolarity,
+               sConfig->ICSelection,
+               sConfig->ICFilter);
+
+    /* Reset the IC1PSC Bits */
+    htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+    /* Set the IC1PSC value */
+    htim->Instance->CCMR1 |= sConfig->ICPrescaler;
+  }
+  else if (Channel == TIM_CHANNEL_2)
+  {
+    /* TI2 Configuration */
+    assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+    TIM_TI2_SetConfig(htim->Instance,
+                      sConfig->ICPolarity,
+                      sConfig->ICSelection,
+                      sConfig->ICFilter);
+
+    /* Reset the IC2PSC Bits */
+    htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+    /* Set the IC2PSC value */
+    htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8);
+  }
+  else if (Channel == TIM_CHANNEL_3)
+  {
+    /* TI3 Configuration */
+    assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+    TIM_TI3_SetConfig(htim->Instance,
+               sConfig->ICPolarity,
+               sConfig->ICSelection,
+               sConfig->ICFilter);
+
+    /* Reset the IC3PSC Bits */
+    htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
+
+    /* Set the IC3PSC value */
+    htim->Instance->CCMR2 |= sConfig->ICPrescaler;
+  }
+  else
+  {
+    /* TI4 Configuration */
+    assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+    TIM_TI4_SetConfig(htim->Instance,
+               sConfig->ICPolarity,
+               sConfig->ICSelection,
+               sConfig->ICFilter);
+
+    /* Reset the IC4PSC Bits */
+    htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
+
+    /* Set the IC4PSC value */
+    htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8);
+  }
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM PWM  channels according to the specified
+  *         parameters in the TIM_OC_InitTypeDef.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sConfig: TIM PWM configuration structure
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+  __HAL_LOCK(htim);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CHANNELS(Channel));
+  assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+  assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+  assert_param(IS_TIM_OCN_POLARITY(sConfig->OCNPolarity));
+  assert_param(IS_TIM_OCNIDLE_STATE(sConfig->OCNIdleState));
+  assert_param(IS_TIM_OCIDLE_STATE(sConfig->OCIdleState));
+  assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      /* Configure the Channel 1 in PWM mode */
+      TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+      /* Set the Preload enable bit for channel1 */
+      htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+      /* Configure the Output Fast mode */
+      htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+      htim->Instance->CCMR1 |= sConfig->OCFastMode;
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      /* Configure the Channel 2 in PWM mode */
+      TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+      /* Set the Preload enable bit for channel2 */
+      htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+      /* Configure the Output Fast mode */
+      htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+      htim->Instance->CCMR1 |= sConfig->OCFastMode << 8;
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+      /* Configure the Channel 3 in PWM mode */
+      TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+      /* Set the Preload enable bit for channel3 */
+      htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+     /* Configure the Output Fast mode */
+      htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+      htim->Instance->CCMR2 |= sConfig->OCFastMode;
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+      /* Configure the Channel 4 in PWM mode */
+      TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+      /* Set the Preload enable bit for channel4 */
+      htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+     /* Configure the Output Fast mode */
+      htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+      htim->Instance->CCMR2 |= sConfig->OCFastMode << 8;
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM One Pulse Channels according to the specified
+  *         parameters in the TIM_OnePulse_InitTypeDef.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sConfig: TIM One Pulse configuration structure
+  * @param  OutputChannel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @param  InputChannel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim,  TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel,  uint32_t InputChannel)
+{
+  TIM_OC_InitTypeDef temp1;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
+  assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
+
+  if(OutputChannel != InputChannel)
+  {
+    __HAL_LOCK(htim);
+
+    htim->State = HAL_TIM_STATE_BUSY;
+
+    /* Extract the Output compare configuration from sConfig structure */
+    temp1.OCMode = sConfig->OCMode;
+    temp1.Pulse = sConfig->Pulse;
+    temp1.OCPolarity = sConfig->OCPolarity;
+    temp1.OCNPolarity = sConfig->OCNPolarity;
+    temp1.OCIdleState = sConfig->OCIdleState;
+    temp1.OCNIdleState = sConfig->OCNIdleState;
+
+    switch (OutputChannel)
+    {
+      case TIM_CHANNEL_1:
+      {
+        assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+        TIM_OC1_SetConfig(htim->Instance, &temp1);
+      }
+      break;
+      case TIM_CHANNEL_2:
+      {
+        assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+        TIM_OC2_SetConfig(htim->Instance, &temp1);
+      }
+      break;
+      default:
+      break;
+    }
+    switch (InputChannel)
+    {
+      case TIM_CHANNEL_1:
+      {
+        assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+        TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
+                        sConfig->ICSelection, sConfig->ICFilter);
+
+        /* Reset the IC1PSC Bits */
+        htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+        /* Select the Trigger source */
+        htim->Instance->SMCR &= ~TIM_SMCR_TS;
+        htim->Instance->SMCR |= TIM_TS_TI1FP1;
+
+        /* Select the Slave Mode */
+        htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+        htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+      }
+      break;
+      case TIM_CHANNEL_2:
+      {
+        assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+        TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
+                 sConfig->ICSelection, sConfig->ICFilter);
+
+        /* Reset the IC2PSC Bits */
+        htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+        /* Select the Trigger source */
+        htim->Instance->SMCR &= ~TIM_SMCR_TS;
+        htim->Instance->SMCR |= TIM_TS_TI2FP2;
+
+        /* Select the Slave Mode */
+        htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+        htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+      }
+      break;
+
+      default:
+      break;
+    }
+
+    htim->State = HAL_TIM_STATE_READY;
+
+    __HAL_UNLOCK(htim);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  BurstBaseAddress: TIM Base address from when the DMA will starts the Data write.
+  *         This parameters can be on of the following values:
+  *            @arg TIM_DMABASE_CR1
+  *            @arg TIM_DMABASE_CR2
+  *            @arg TIM_DMABASE_SMCR
+  *            @arg TIM_DMABASE_DIER
+  *            @arg TIM_DMABASE_SR
+  *            @arg TIM_DMABASE_EGR
+  *            @arg TIM_DMABASE_CCMR1
+  *            @arg TIM_DMABASE_CCMR2
+  *            @arg TIM_DMABASE_CCER
+  *            @arg TIM_DMABASE_CNT
+  *            @arg TIM_DMABASE_PSC
+  *            @arg TIM_DMABASE_ARR
+  *            @arg TIM_DMABASE_RCR
+  *            @arg TIM_DMABASE_CCR1
+  *            @arg TIM_DMABASE_CCR2
+  *            @arg TIM_DMABASE_CCR3
+  *            @arg TIM_DMABASE_CCR4
+  *            @arg TIM_DMABASE_BDTR
+  *            @arg TIM_DMABASE_DCR
+  * @param  BurstRequestSrc: TIM DMA Request sources.
+  *         This parameters can be on of the following values:
+  *            @arg TIM_DMA_UPDATE: TIM update Interrupt source
+  *            @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+  *            @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+  *            @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+  *            @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+  *            @arg TIM_DMA_COM: TIM Commutation DMA source
+  *            @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+  * @param  BurstBuffer: The Buffer address.
+  * @param  BurstLength: DMA Burst length. This parameter can be one value
+  *         between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+                                              uint32_t* BurstBuffer, uint32_t  BurstLength)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+  assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((BurstBuffer == 0 ) && (BurstLength > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  switch(BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC4:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_COM:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_TRIGGER:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    default:
+    break;
+  }
+   /* configure the DMA Burst Mode */
+   htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+   /* Enable the TIM DMA Request */
+   __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+   htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM DMA Burst mode
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  BurstRequestSrc: TIM DMA Request sources to disable
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+  /* Abort the DMA transfer (at least disable the DMA channel) */
+  switch(BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+    }
+    break;
+    case TIM_DMA_CC1:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+    }
+    break;
+    case TIM_DMA_CC2:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+    }
+    break;
+    case TIM_DMA_CC3:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+    }
+    break;
+    case TIM_DMA_CC4:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+    }
+    break;
+    case TIM_DMA_COM:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+    }
+    break;
+    case TIM_DMA_TRIGGER:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+    }
+    break;
+    default:
+    break;
+  }
+
+  /* Disable the TIM Update DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  BurstBaseAddress: TIM Base address from when the DMA will starts the Data read.
+  *         This parameters can be on of the following values:
+  *            @arg TIM_DMABASE_CR1
+  *            @arg TIM_DMABASE_CR2
+  *            @arg TIM_DMABASE_SMCR
+  *            @arg TIM_DMABASE_DIER
+  *            @arg TIM_DMABASE_SR
+  *            @arg TIM_DMABASE_EGR
+  *            @arg TIM_DMABASE_CCMR1
+  *            @arg TIM_DMABASE_CCMR2
+  *            @arg TIM_DMABASE_CCER
+  *            @arg TIM_DMABASE_CNT
+  *            @arg TIM_DMABASE_PSC
+  *            @arg TIM_DMABASE_ARR
+  *            @arg TIM_DMABASE_RCR
+  *            @arg TIM_DMABASE_CCR1
+  *            @arg TIM_DMABASE_CCR2
+  *            @arg TIM_DMABASE_CCR3
+  *            @arg TIM_DMABASE_CCR4
+  *            @arg TIM_DMABASE_BDTR
+  *            @arg TIM_DMABASE_DCR
+  * @param  BurstRequestSrc: TIM DMA Request sources.
+  *         This parameters can be on of the following values:
+  *            @arg TIM_DMA_UPDATE: TIM update Interrupt source
+  *            @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+  *            @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+  *            @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+  *            @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+  *            @arg TIM_DMA_COM: TIM Commutation DMA source
+  *            @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+  * @param  BurstBuffer: The Buffer address.
+  * @param  BurstLength: DMA Burst length. This parameter can be one value
+  *         between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+                                             uint32_t  *BurstBuffer, uint32_t  BurstLength)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+  assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((BurstBuffer == 0 ) && (BurstLength > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  switch(BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+       HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC4:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_COM:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_TRIGGER:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    default:
+    break;
+  }
+
+  /* configure the DMA Burst Mode */
+  htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+  /* Enable the TIM DMA Request */
+  __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop the DMA burst reading
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  BurstRequestSrc: TIM DMA Request sources to disable.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+  /* Abort the DMA transfer (at least disable the DMA channel) */
+  switch(BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+    }
+    break;
+    case TIM_DMA_CC1:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+    }
+    break;
+    case TIM_DMA_CC2:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+    }
+    break;
+    case TIM_DMA_CC3:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+    }
+    break;
+    case TIM_DMA_CC4:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+    }
+    break;
+    case TIM_DMA_COM:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+    }
+    break;
+    case TIM_DMA_TRIGGER:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+    }
+    break;
+    default:
+    break;
+  }
+
+  /* Disable the TIM Update DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Generate a software event
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  EventSource: specifies the event source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
+  *            @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
+  *            @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
+  *            @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
+  *            @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
+  *            @arg TIM_EVENTSOURCE_COM: Timer COM event source
+  *            @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
+  *            @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
+  * @note   TIM6 and TIM7 can only generate an update event.
+  * @note   TIM_EVENTSOURCE_COM and TIM_EVENTSOURCE_BREAK are used only with TIM1 and TIM8.
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_EVENT_SOURCE(EventSource));
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  /* Change the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Set the event sources */
+  htim->Instance->EGR = EventSource;
+
+  /* Change the TIM state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the OCRef clear feature
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sClearInputConfig: pointer to a TIM_ClearInputConfigTypeDef structure that
+  *         contains the OCREF clear feature and parameters for the TIM peripheral.
+  * @param  Channel: specifies the TIM Channel.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_CHANNELS(Channel));
+  assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+  assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+  assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+  assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  if(sClearInputConfig->ClearInputSource == TIM_CLEARINPUTSOURCE_ETR)
+  {
+    TIM_ETR_SetConfig(htim->Instance,
+                      sClearInputConfig->ClearInputPrescaler,
+                      sClearInputConfig->ClearInputPolarity,
+                      sClearInputConfig->ClearInputFilter);
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      if(sClearInputConfig->ClearInputState != RESET)
+      {
+        /* Enable the Ocref clear feature for Channel 1 */
+        htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+      }
+      else
+      {
+        /* Disable the Ocref clear feature for Channel 1 */
+        htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+      }
+    }
+    break;
+    case TIM_CHANNEL_2:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      if(sClearInputConfig->ClearInputState != RESET)
+      {
+        /* Enable the Ocref clear feature for Channel 2 */
+        htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+      }
+      else
+      {
+        /* Disable the Ocref clear feature for Channel 2 */
+        htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+      }
+    }
+    break;
+    case TIM_CHANNEL_3:
+    {
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+      if(sClearInputConfig->ClearInputState != RESET)
+      {
+        /* Enable the Ocref clear feature for Channel 3 */
+        htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+      }
+      else
+      {
+        /* Disable the Ocref clear feature for Channel 3 */
+        htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+      }
+    }
+    break;
+    case TIM_CHANNEL_4:
+    {
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+      if(sClearInputConfig->ClearInputState != RESET)
+      {
+        /* Enable the Ocref clear feature for Channel 4 */
+        htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+      }
+      else
+      {
+        /* Disable the Ocref clear feature for Channel 4 */
+        htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+      }
+    }
+    break;
+    default:
+    break;
+  }
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief   Configures the clock source to be used
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sClockSourceConfig: pointer to a TIM_ClockConfigTypeDef structure that
+  *         contains the clock source information for the TIM peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig)
+{
+  uint32_t tmpsmcr = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
+  assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+  assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+  assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+  /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
+  tmpsmcr = htim->Instance->SMCR;
+  tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+  tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+  htim->Instance->SMCR = tmpsmcr;
+
+  switch (sClockSourceConfig->ClockSource)
+  {
+    case TIM_CLOCKSOURCE_INTERNAL:
+    {
+      assert_param(IS_TIM_INSTANCE(htim->Instance));
+      /* Disable slave mode to clock the prescaler directly with the internal clock */
+      htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+    }
+    break;
+
+    case TIM_CLOCKSOURCE_ETRMODE1:
+    {
+      assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+      /* Configure the ETR Clock source */
+      TIM_ETR_SetConfig(htim->Instance,
+                        sClockSourceConfig->ClockPrescaler,
+                        sClockSourceConfig->ClockPolarity,
+                        sClockSourceConfig->ClockFilter);
+      /* Get the TIMx SMCR register value */
+      tmpsmcr = htim->Instance->SMCR;
+      /* Reset the SMS and TS Bits */
+      tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+      /* Select the External clock mode1 and the ETRF trigger */
+      tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
+      /* Write to TIMx SMCR */
+      htim->Instance->SMCR = tmpsmcr;
+    }
+    break;
+
+    case TIM_CLOCKSOURCE_ETRMODE2:
+    {
+      assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+      /* Configure the ETR Clock source */
+      TIM_ETR_SetConfig(htim->Instance,
+                        sClockSourceConfig->ClockPrescaler,
+                        sClockSourceConfig->ClockPolarity,
+                        sClockSourceConfig->ClockFilter);
+      /* Enable the External clock mode2 */
+      htim->Instance->SMCR |= TIM_SMCR_ECE;
+    }
+    break;
+
+    case TIM_CLOCKSOURCE_TI1:
+    {
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      TIM_TI1_ConfigInputStage(htim->Instance,
+                        sClockSourceConfig->ClockPolarity,
+                        sClockSourceConfig->ClockFilter);
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
+    }
+    break;
+    case TIM_CLOCKSOURCE_TI2:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      TIM_TI2_ConfigInputStage(htim->Instance,
+                        sClockSourceConfig->ClockPolarity,
+                        sClockSourceConfig->ClockFilter);
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
+    }
+    break;
+    case TIM_CLOCKSOURCE_TI1ED:
+    {
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      TIM_TI1_ConfigInputStage(htim->Instance,
+                        sClockSourceConfig->ClockPolarity,
+                        sClockSourceConfig->ClockFilter);
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
+    }
+    break;
+    case TIM_CLOCKSOURCE_ITR0:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
+    }
+    break;
+    case TIM_CLOCKSOURCE_ITR1:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
+    }
+    break;
+    case TIM_CLOCKSOURCE_ITR2:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
+    }
+    break;
+    case TIM_CLOCKSOURCE_ITR3:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
+    }
+    break;
+
+    default:
+    break;
+  }
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Selects the signal connected to the TI1 input: direct from CH1_input
+  *         or a XOR combination between CH1_input, CH2_input & CH3_input
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  TI1_Selection: Indicate whether or not channel 1 is connected to the
+  *         output of a XOR gate.
+  *         This parameter can be one of the following values:
+  *            @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
+  *            @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
+  *            pins are connected to the TI1 input (XOR combination)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
+{
+  uint32_t tmpcr2 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
+
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = htim->Instance->CR2;
+
+  /* Reset the TI1 selection */
+  tmpcr2 &= ~TIM_CR2_TI1S;
+
+  /* Set the TI1 selection */
+  tmpcr2 |= TI1_Selection;
+
+  /* Write to TIMxCR2 */
+  htim->Instance->CR2 = tmpcr2;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the TIM in Slave mode
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
+  *         contains the selected trigger (internal trigger input, filtered
+  *         timer input or external trigger input) and the ) and the Slave
+  *         mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+  assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+  /* Disable Trigger Interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
+
+  /* Disable Trigger DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the TIM in Slave mode in interrupt mode
+  * @param  htim: TIM handle.
+  * @param  sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
+  *         contains the selected trigger (internal trigger input, filtered
+  *         timer input or external trigger input) and the ) and the Slave
+  *         mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim,
+                                                        TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+  assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+  /* Enable Trigger Interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
+
+  /* Disable Trigger DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Read the captured value from Capture Compare unit
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval Captured value
+  */
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpreg = 0;
+
+  __HAL_LOCK(htim);
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+      /* Return the capture 1 value */
+      tmpreg = htim->Instance->CCR1;
+
+      break;
+    }
+    case TIM_CHANNEL_2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+      /* Return the capture 2 value */
+      tmpreg = htim->Instance->CCR2;
+
+      break;
+    }
+
+    case TIM_CHANNEL_3:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+      /* Return the capture 3 value */
+      tmpreg = htim->Instance->CCR3;
+
+      break;
+    }
+
+    case TIM_CHANNEL_4:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+      /* Return the capture 4 value */
+      tmpreg = htim->Instance->CCR4;
+
+      break;
+    }
+
+    default:
+    break;
+  }
+
+  __HAL_UNLOCK(htim);
+  return tmpreg;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ *  @brief    TIM Callbacks functions
+ *
+ at verbatim
+  ==============================================================================
+                        ##### TIM Callbacks functions #####
+  ==============================================================================
+ [..]
+   This section provides TIM callback functions:
+   (+) Timer Period elapsed callback
+   (+) Timer Output Compare callback
+   (+) Timer Input capture callback
+   (+) Timer Trigger callback
+   (+) Timer Error callback
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Period elapsed callback in non blocking mode
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
+   */
+
+}
+/**
+  * @brief  Output Compare callback in non blocking mode
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
+   */
+}
+/**
+  * @brief  Input Capture callback in non blocking mode
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  PWM Pulse finished callback in non blocking mode
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Hall Trigger detection callback in non blocking mode
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_TriggerCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Timer error callback in non blocking mode
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_ErrorCallback could be implemented in the user file
+   */
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions
+ *  @brief   Peripheral State functions
+ *
+ at verbatim
+  ==============================================================================
+                        ##### Peripheral State functions #####
+  ==============================================================================
+  [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the TIM Base state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM OC state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM PWM state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM Input Capture state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM One Pulse Mode state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM Encoder Mode state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+/**
+  * @}
+  */
+
+/**
+  * @brief  Time Base configuration
+  * @param  TIMx: TIM peripheral
+  * @param  Structure: pointer on TIM Time Base required parameters
+  * @retval None
+  */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
+{
+  uint32_t tmpcr1 = 0;
+  tmpcr1 = TIMx->CR1;
+
+  /* Set TIM Time Base Unit parameters ---------------------------------------*/
+  if(IS_TIM_CC3_INSTANCE(TIMx) != RESET)
+  {
+    /* Select the Counter Mode */
+    tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
+    tmpcr1 |= Structure->CounterMode;
+  }
+
+  if(IS_TIM_CC1_INSTANCE(TIMx) != RESET)
+  {
+    /* Set the clock division */
+    tmpcr1 &= ~TIM_CR1_CKD;
+    tmpcr1 |= (uint32_t)Structure->ClockDivision;
+  }
+
+  TIMx->CR1 = tmpcr1;
+
+  /* Set the Auto-reload value */
+  TIMx->ARR = (uint32_t)Structure->Period ;
+
+  /* Set the Prescaler value */
+  TIMx->PSC = (uint32_t)Structure->Prescaler;
+
+  if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+  {
+    /* Set the Repetition Counter value */
+    TIMx->RCR = Structure->RepetitionCounter;
+  }
+
+  /* Generate an update event to reload the Prescaler
+     and the repetition counter(only for TIM1 and TIM8) value immediately */
+  TIMx->EGR = TIM_EGR_UG;
+}
+
+/**
+  * @brief  Configure the TI1 as Input.
+  * @param  TIMx to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPolarity_Rising
+  *            @arg TIM_ICPolarity_Falling
+  *            @arg TIM_ICPolarity_BothEdge
+  * @param  TIM_ICSelection: specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
+  *            @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
+  *            @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
+  *       (on channel2 path) is used as the input signal. Therefore CCMR1 must be
+  *        protected against un-initialized filter and polarity values.
+  * @retval None
+  */
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 1: Reset the CC1E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC1E;
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
+  {
+    tmpccmr1 &= ~TIM_CCMR1_CC1S;
+    tmpccmr1 |= TIM_ICSelection;
+  }
+  else
+  {
+    tmpccmr1 &= ~TIM_CCMR1_CC1S;
+    tmpccmr1 |= TIM_CCMR1_CC1S_0;
+  }
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC1F;
+  tmpccmr1 |= ((TIM_ICFilter << 4) & TIM_CCMR1_IC1F);
+
+  /* Select the Polarity and set the CC1E Bit */
+  tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+  tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Time Output Compare 2 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config: The output configuration structure
+  * @retval None
+  */
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0;
+
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC2E;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = TIMx->CR2;
+
+  /* Get the TIMx CCMR1 register value */
+  tmpccmrx = TIMx->CCMR1;
+
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= ~TIM_CCMR1_OC2M;
+  tmpccmrx &= ~TIM_CCMR1_CC2S;
+
+  /* Select the Output Compare Mode */
+  tmpccmrx |= (OC_Config->OCMode << 8);
+
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC2P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 4);
+
+  if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+  {
+    assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+    assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+    assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+    /* Reset the Output N Polarity level */
+    tmpccer &= ~TIM_CCER_CC2NP;
+    /* Set the Output N Polarity */
+    tmpccer |= (OC_Config->OCNPolarity << 4);
+    /* Reset the Output N State */
+    tmpccer &= ~TIM_CCER_CC2NE;
+
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS2;
+    tmpcr2 &= ~TIM_CR2_OIS2N;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 2);
+    /* Set the Output N Idle state */
+    tmpcr2 |= (OC_Config->OCNIdleState << 2);
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR2 = OC_Config->Pulse;
+
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  TIM DMA Delay Pulse complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  htim->State= HAL_TIM_STATE_READY;
+
+  if(hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+  }
+  else if(hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+  }
+  else if(hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+  }
+  else if(hdma == htim->hdma[TIM_DMA_ID_CC4])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+  }
+
+  HAL_TIM_PWM_PulseFinishedCallback(htim);
+
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+  * @brief  TIM DMA error callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void TIM_DMAError(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  htim->State= HAL_TIM_STATE_READY;
+
+  HAL_TIM_ErrorCallback(htim);
+}
+
+/**
+  * @brief  TIM DMA Capture complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  htim->State= HAL_TIM_STATE_READY;
+
+  if(hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+  }
+  else if(hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+  }
+  else if(hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+  }
+  else if(hdma == htim->hdma[TIM_DMA_ID_CC4])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+  }
+
+  HAL_TIM_IC_CaptureCallback(htim);
+
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+  * @brief  Enables or disables the TIM Capture Compare Channel x.
+  * @param  TIMx to select the TIM peripheral
+  * @param  Channel: specifies the TIM Channel
+  *          This parameter can be one of the following values:
+  *            @arg TIM_Channel_1: TIM Channel 1
+  *            @arg TIM_Channel_2: TIM Channel 2
+  *            @arg TIM_Channel_3: TIM Channel 3
+  *            @arg TIM_Channel_4: TIM Channel 4
+  * @param  ChannelState: specifies the TIM Channel CCxE bit new state.
+  *          This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.
+  * @retval None
+  */
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
+{
+  uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CC1_INSTANCE(TIMx));
+  assert_param(IS_TIM_CHANNELS(Channel));
+
+  tmp = TIM_CCER_CC1E << Channel;
+
+  /* Reset the CCxE Bit */
+  TIMx->CCER &= ~tmp;
+
+  /* Set or reset the CCxE Bit */
+  TIMx->CCER |= (uint32_t)(ChannelState << Channel);
+}
+
+/**
+  * @brief  TIM DMA Period Elapse complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  htim->State= HAL_TIM_STATE_READY;
+
+  HAL_TIM_PeriodElapsedCallback(htim);
+}
+
+/**
+  * @brief  TIM DMA Trigger callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  htim->State= HAL_TIM_STATE_READY;
+
+  HAL_TIM_TriggerCallback(htim);
+}
+
+/**
+  * @brief  Time Output Compare 1 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config: The output configuration structure
+  * @retval None
+  */
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0;
+
+  /* Disable the Channel 1: Reset the CC1E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC1E;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = TIMx->CR2;
+
+  /* Get the TIMx CCMR1 register value */
+  tmpccmrx = TIMx->CCMR1;
+
+  /* Reset the Output Compare Mode Bits */
+  tmpccmrx &= ~TIM_CCMR1_OC1M;
+  tmpccmrx &= ~TIM_CCMR1_CC1S;
+  /* Select the Output Compare Mode */
+  tmpccmrx |= OC_Config->OCMode;
+
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC1P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= OC_Config->OCPolarity;
+
+
+  if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+  {
+    /* Reset the Output N Polarity level */
+    tmpccer &= ~TIM_CCER_CC1NP;
+    /* Set the Output N Polarity */
+    tmpccer |= OC_Config->OCNPolarity;
+    /* Reset the Output N State */
+    tmpccer &= ~TIM_CCER_CC1NE;
+
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS1;
+    tmpcr2 &= ~TIM_CR2_OIS1N;
+    /* Set the Output Idle state */
+    tmpcr2 |= OC_Config->OCIdleState;
+    /* Set the Output N Idle state */
+    tmpcr2 |= OC_Config->OCNIdleState;
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR1 = OC_Config->Pulse;
+
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Time Output Compare 3 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config: The output configuration structure
+  * @retval None
+  */
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0;
+
+  /* Disable the Channel 3: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC3E;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = TIMx->CR2;
+
+  /* Get the TIMx CCMR2 register value */
+  tmpccmrx = TIMx->CCMR2;
+
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= ~TIM_CCMR2_OC3M;
+  tmpccmrx &= ~TIM_CCMR2_CC3S;
+  /* Select the Output Compare Mode */
+  tmpccmrx |= OC_Config->OCMode;
+
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC3P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 8);
+
+  if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+  {
+    assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+    assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+    assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+    /* Reset the Output N Polarity level */
+    tmpccer &= ~TIM_CCER_CC3NP;
+    /* Set the Output N Polarity */
+    tmpccer |= (OC_Config->OCNPolarity << 8);
+    /* Reset the Output N State */
+    tmpccer &= ~TIM_CCER_CC3NE;
+
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS3;
+    tmpcr2 &= ~TIM_CR2_OIS3N;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 4);
+    /* Set the Output N Idle state */
+    tmpcr2 |= (OC_Config->OCNIdleState << 4);
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+
+  /* Write to TIMx CCMR2 */
+  TIMx->CCMR2 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR3 = OC_Config->Pulse;
+
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Time Output Compare 4 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config: The output configuration structure
+  * @retval None
+  */
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0;
+
+  /* Disable the Channel 4: Reset the CC4E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC4E;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = TIMx->CR2;
+
+  /* Get the TIMx CCMR2 register value */
+  tmpccmrx = TIMx->CCMR2;
+
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= ~TIM_CCMR2_OC4M;
+  tmpccmrx &= ~TIM_CCMR2_CC4S;
+
+  /* Select the Output Compare Mode */
+  tmpccmrx |= (OC_Config->OCMode << 8);
+
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC4P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 12);
+
+  /*if((TIMx == TIM1) || (TIMx == TIM8))*/
+  if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+  {
+    assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+    /* Reset the Output Compare IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS4;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 6);
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+
+  /* Write to TIMx CCMR2 */
+  TIMx->CCMR2 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR4 = OC_Config->Pulse;
+
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Time Output Compare 4 configuration
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sSlaveConfig: The slave configuration structure
+  * @retval None
+  */
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+                              TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+  uint32_t tmpsmcr = 0;
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+ /* Get the TIMx SMCR register value */
+  tmpsmcr = htim->Instance->SMCR;
+
+  /* Reset the Trigger Selection Bits */
+  tmpsmcr &= ~TIM_SMCR_TS;
+  /* Set the Input Trigger source */
+  tmpsmcr |= sSlaveConfig->InputTrigger;
+
+  /* Reset the slave mode Bits */
+  tmpsmcr &= ~TIM_SMCR_SMS;
+  /* Set the slave mode */
+  tmpsmcr |= sSlaveConfig->SlaveMode;
+
+  /* Write to TIMx SMCR */
+  htim->Instance->SMCR = tmpsmcr;
+
+  /* Configure the trigger prescaler, filter, and polarity */
+  switch (sSlaveConfig->InputTrigger)
+  {
+  case TIM_TS_ETRF:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+      /* Configure the ETR Trigger source */
+      TIM_ETR_SetConfig(htim->Instance,
+                        sSlaveConfig->TriggerPrescaler,
+                        sSlaveConfig->TriggerPolarity,
+                        sSlaveConfig->TriggerFilter);
+    }
+    break;
+
+  case TIM_TS_TI1F_ED:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+      /* Disable the Channel 1: Reset the CC1E Bit */
+      tmpccer = htim->Instance->CCER;
+      htim->Instance->CCER &= ~TIM_CCER_CC1E;
+      tmpccmr1 = htim->Instance->CCMR1;
+
+      /* Set the filter */
+      tmpccmr1 &= ~TIM_CCMR1_IC1F;
+      tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4);
+
+      /* Write to TIMx CCMR1 and CCER registers */
+      htim->Instance->CCMR1 = tmpccmr1;
+      htim->Instance->CCER = tmpccer;
+
+    }
+    break;
+
+  case TIM_TS_TI1FP1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+      /* Configure TI1 Filter and Polarity */
+      TIM_TI1_ConfigInputStage(htim->Instance,
+                               sSlaveConfig->TriggerPolarity,
+                               sSlaveConfig->TriggerFilter);
+    }
+    break;
+
+  case TIM_TS_TI2FP2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+      /* Configure TI2 Filter and Polarity */
+      TIM_TI2_ConfigInputStage(htim->Instance,
+                                sSlaveConfig->TriggerPolarity,
+                                sSlaveConfig->TriggerFilter);
+    }
+    break;
+
+  case TIM_TS_ITR0:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+
+  case TIM_TS_ITR1:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+
+  case TIM_TS_ITR2:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+
+  case TIM_TS_ITR3:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+
+  default:
+    break;
+  }
+}
+
+
+/**
+  * @brief  Configure the Polarity and Filter for TI1.
+  * @param  TIMx to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPolarity_Rising
+  *            @arg TIM_ICPolarity_Falling
+  *            @arg TIM_ICPolarity_BothEdge
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 1: Reset the CC1E Bit */
+  tmpccer = TIMx->CCER;
+  TIMx->CCER &= ~TIM_CCER_CC1E;
+  tmpccmr1 = TIMx->CCMR1;
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC1F;
+  tmpccmr1 |= (TIM_ICFilter << 4);
+
+  /* Select the Polarity and set the CC1E Bit */
+  tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+  tmpccer |= TIM_ICPolarity;
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI2 as Input.
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPolarity_Rising
+  *            @arg TIM_ICPolarity_Falling
+  *            @arg TIM_ICPolarity_BothEdge
+  * @param  TIM_ICSelection: specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
+  *            @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
+  *            @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
+  *       (on channel1 path) is used as the input signal. Therefore CCMR1 must be
+  *        protected against un-initialized filter and polarity values.
+  * @retval None
+  */
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC2E;
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  tmpccmr1 &= ~TIM_CCMR1_CC2S;
+  tmpccmr1 |= (TIM_ICSelection << 8);
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC2F;
+  tmpccmr1 |= ((TIM_ICFilter << 12) & TIM_CCMR1_IC2F);
+
+  /* Select the Polarity and set the CC2E Bit */
+  tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+  tmpccer |= ((TIM_ICPolarity << 4) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1 ;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the Polarity and Filter for TI2.
+  * @param  TIMx to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPolarity_Rising
+  *            @arg TIM_ICPolarity_Falling
+  *            @arg TIM_ICPolarity_BothEdge
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  */
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC2E;
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC2F;
+  tmpccmr1 |= (TIM_ICFilter << 12);
+
+  /* Select the Polarity and set the CC2E Bit */
+  tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+  tmpccer |= (TIM_ICPolarity << 4);
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1 ;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI3 as Input.
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPolarity_Rising
+  *            @arg TIM_ICPolarity_Falling
+  *            @arg TIM_ICPolarity_BothEdge
+  * @param  TIM_ICSelection: specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
+  *            @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
+  *            @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
+  *       (on channel4 path) is used as the input signal. Therefore CCMR2 must be
+  *        protected against un-initialized filter and polarity values.
+  * @retval None
+  */
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr2 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 3: Reset the CC3E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC3E;
+  tmpccmr2 = TIMx->CCMR2;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  tmpccmr2 &= ~TIM_CCMR2_CC3S;
+  tmpccmr2 |= TIM_ICSelection;
+
+  /* Set the filter */
+  tmpccmr2 &= ~TIM_CCMR2_IC3F;
+  tmpccmr2 |= ((TIM_ICFilter << 4) & TIM_CCMR2_IC3F);
+
+  /* Select the Polarity and set the CC3E Bit */
+  tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+  tmpccer |= ((TIM_ICPolarity << 8) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
+
+  /* Write to TIMx CCMR2 and CCER registers */
+  TIMx->CCMR2 = tmpccmr2;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI4 as Input.
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPolarity_Rising
+  *            @arg TIM_ICPolarity_Falling
+  *            @arg TIM_ICPolarity_BothEdge
+  * @param  TIM_ICSelection: specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
+  *            @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
+  *            @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
+  *       (on channel3 path) is used as the input signal. Therefore CCMR2 must be
+  *        protected against un-initialized filter and polarity values.
+  * @retval None
+  */
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr2 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 4: Reset the CC4E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC4E;
+  tmpccmr2 = TIMx->CCMR2;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  tmpccmr2 &= ~TIM_CCMR2_CC4S;
+  tmpccmr2 |= (TIM_ICSelection << 8);
+
+  /* Set the filter */
+  tmpccmr2 &= ~TIM_CCMR2_IC4F;
+  tmpccmr2 |= ((TIM_ICFilter << 12) & TIM_CCMR2_IC4F);
+
+  /* Select the Polarity and set the CC4E Bit */
+  tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+  tmpccer |= ((TIM_ICPolarity << 12) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
+
+  /* Write to TIMx CCMR2 and CCER registers */
+  TIMx->CCMR2 = tmpccmr2;
+  TIMx->CCER = tmpccer ;
+}
+
+/**
+  * @brief  Selects the Input Trigger source
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ITRx: The Input Trigger source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0: Internal Trigger 0
+  *            @arg TIM_TS_ITR1: Internal Trigger 1
+  *            @arg TIM_TS_ITR2: Internal Trigger 2
+  *            @arg TIM_TS_ITR3: Internal Trigger 3
+  *            @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+  *            @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+  *            @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+  *            @arg TIM_TS_ETRF: External Trigger input
+  * @retval None
+  */
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t TIM_ITRx)
+{
+  uint32_t tmpsmcr = 0;
+
+   /* Get the TIMx SMCR register value */
+   tmpsmcr = TIMx->SMCR;
+   /* Reset the TS Bits */
+   tmpsmcr &= ~TIM_SMCR_TS;
+   /* Set the Input Trigger source and the slave mode*/
+   tmpsmcr |= TIM_ITRx | TIM_SLAVEMODE_EXTERNAL1;
+   /* Write to TIMx SMCR */
+   TIMx->SMCR = tmpsmcr;
+}
+
+/**
+  * @brief  Configures the TIMx External Trigger (ETR).
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ExtTRGPSC_DIV1: ETRP Prescaler OFF.
+  *            @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+  *            @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+  *            @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+  * @param  TIM_ExtTRGPolarity: The external Trigger Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+  *            @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+  * @param  ExtTRGFilter: External Trigger Filter.
+  *          This parameter must be a value between 0x00 and 0x0F
+  * @retval None
+  */
+static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+                       uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
+{
+  uint32_t tmpsmcr = 0;
+
+  tmpsmcr = TIMx->SMCR;
+
+  /* Reset the ETR Bits */
+  tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+  /* Set the Prescaler, the Filter value and the Polarity */
+  tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8)));
+
+  /* Write to TIMx SMCR */
+  TIMx->SMCR = tmpsmcr;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c
new file mode 100644
index 0000000..8140283
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c
@@ -0,0 +1,1864 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_tim_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   TIM HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Timer extension peripheral:
+  *           + Time Hall Sensor Interface Initialization
+  *           + Time Hall Sensor Interface Start
+  *           + Time Complementary signal bread and dead time configuration
+  *           + Time Master and Slave synchronization configuration
+  @verbatim
+  ==============================================================================
+                      ##### TIMER Extended features #####
+  ==============================================================================
+  [..]
+    The Timer Extension features include:
+    (#) Complementary outputs with programmable dead-time for :
+        (++) Input Capture
+        (++) Output Compare
+        (++) PWM generation (Edge and Center-aligned Mode)
+        (++) One-pulse mode output
+    (#) Synchronization circuit to control the timer with external signals and to
+        interconnect several timers together.
+    (#) Break input to put the timer output signals in reset state or in a known state.
+    (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
+        positioning purposes
+
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+     (#) Initialize the TIM low level resources by implementing the following functions
+         depending from feature used :
+           (++) Complementary Output Compare : HAL_TIM_OC_MspInit()
+           (++) Complementary PWM generation : HAL_TIM_PWM_MspInit()
+           (++) Complementary One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+           (++) Hall Sensor output : HAL_TIM_HallSensor_MspInit()
+
+     (#) Initialize the TIM low level resources :
+        (##) Enable the TIM interface clock using __TIMx_CLK_ENABLE();
+        (##) TIM pins configuration
+            (+++) Enable the clock for the TIM GPIOs using the following function:
+                 __GPIOx_CLK_ENABLE();
+            (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+     (#) The external Clock can be configured, if needed (the default clock is the
+         internal clock from the APBx), using the following function:
+         HAL_TIM_ConfigClockSource, the clock configuration should be done before
+         any start function.
+
+    (#) Configure the TIM in the desired functioning mode using one of the
+        initialization function of this driver:
+        (++) HAL_TIMEx_HallSensor_Init and HAL_TIMEx_ConfigCommutationEvent: to use the
+             Timer Hall Sensor Interface and the commutation event with the corresponding
+             Interrupt and DMA request if needed (Note that One Timer is used to interface
+             with the Hall sensor Interface and another Timer should be used to use
+             the commutation event).
+
+    (#) Activate the TIM peripheral using one of the start functions:
+           (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OC_Start_IT()
+           (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
+           (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
+           (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
+
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup TIMEx  TIMEx
+  * @brief TIM HAL module driver
+  * @{
+  */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup TIMEx_Private_Functions
+  * @{
+  */
+/* Private function prototypes -----------------------------------------------*/
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Functions TIM Exported Functions
+  * @{
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions
+ *  @brief    Timer Hall Sensor functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### Timer Hall Sensor functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure TIM HAL Sensor.
+    (+) De-initialize TIM HAL Sensor.
+    (+) Start the Hall Sensor Interface.
+    (+) Stop the Hall Sensor Interface.
+    (+) Start the Hall Sensor Interface and enable interrupts.
+    (+) Stop the Hall Sensor Interface and disable interrupts.
+    (+) Start the Hall Sensor Interface and enable DMA transfers.
+    (+) Stop the Hall Sensor Interface and disable DMA transfers.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Hall Sensor Interface and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sConfig: TIM Hall Sensor configuration structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig)
+{
+  TIM_OC_InitTypeDef OC_Config;
+
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+  assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+  HAL_TIMEx_HallSensor_MspInit(htim);
+
+  /* Configure the Time base in the Encoder Mode */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the  Hall sensor */
+  TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
+
+  /* Reset the IC1PSC Bits */
+  htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+  /* Set the IC1PSC value */
+  htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
+
+  /* Enable the Hall sensor interface (XOR function of the three inputs) */
+  htim->Instance->CR2 |= TIM_CR2_TI1S;
+
+  /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
+  htim->Instance->SMCR &= ~TIM_SMCR_TS;
+  htim->Instance->SMCR |= TIM_TS_TI1F_ED;
+
+  /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */
+  htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+  htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
+
+  /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
+  OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
+  OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
+  OC_Config.OCMode = TIM_OCMODE_PWM2;
+  OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+  OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+  OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
+  OC_Config.Pulse = sConfig->Commutation_Delay;
+
+  TIM_OC2_SetConfig(htim->Instance, &OC_Config);
+
+  /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
+    register to 101 */
+  htim->Instance->CR2 &= ~TIM_CR2_MMS;
+  htim->Instance->CR2 |= TIM_TRGO_OC2REF;
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM Hall Sensor interface
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIMEx_HallSensor_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Hall Sensor MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Hall Sensor MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Hall Sensor Interface.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+  /* Enable the Input Capture channels 1
+    (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Hall sensor Interface.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channels 1, 2 and 3
+    (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Hall Sensor Interface in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+  /* Enable the capture compare Interrupts 1 event */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+  /* Enable the Input Capture channels 1
+    (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Hall Sensor Interface in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channels 1
+    (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+  /* Disable the capture compare Interrupts event */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Hall Sensor Interface in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  pData: The destination Buffer address.
+  * @param  Length: The length of data to be transferred from TIM peripheral to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+   if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if(((uint32_t)pData == 0 ) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  /* Enable the Input Capture channels 1
+    (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+  /* Set the DMA Input Capture 1 Callback */
+  htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+  /* Set the DMA error callback */
+  htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+  /* Enable the DMA Stream for Capture 1*/
+  HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+  /* Enable the capture compare 1 Interrupt */
+  __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Hall Sensor Interface in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channels 1
+    (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+
+  /* Disable the capture compare Interrupts 1 event */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions
+ *  @brief    Timer Complementary Output Compare functions
+ *
+ at verbatim
+  ==============================================================================
+              ##### Timer Complementary Output Compare functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Start the Complementary Output Compare/PWM.
+    (+) Stop the Complementary Output Compare/PWM.
+    (+) Start the Complementary Output Compare/PWM and enable interrupts.
+    (+) Stop the Complementary Output Compare/PWM and disable interrupts.
+    (+) Start the Complementary Output Compare/PWM and enable DMA transfers.
+    (+) Stop the Complementary Output Compare/PWM and disable DMA transfers.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation on the complementary
+  *         output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+     /* Enable the Capture compare channel N */
+     TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+    __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation on the complementary
+  *         output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+    /* Disable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in interrupt mode
+  *         on the complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Output Compare interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Output Compare interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Output Compare interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Output Compare interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the TIM Break interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+  /* Enable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in interrupt mode
+  *         on the complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the TIM Break interrupt (only if no more channel is active) */
+  if((READ_REG(htim->Instance->CCER) & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+  {
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+  }
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in DMA mode
+  *         on the complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData: The source Buffer address.
+  * @param  Length: The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if(((uint32_t)pData == 0 ) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+      /* Enable the TIM Output Compare DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+      /* Enable the TIM Output Compare DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+{
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+      /* Enable the TIM Output Compare DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+     /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+      /* Enable the TIM Output Compare DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in DMA mode
+  *         on the complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Output Compare DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Output Compare DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Output Compare DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions
+ *  @brief    Timer Complementary PWM functions
+ *
+ at verbatim
+  ==============================================================================
+                 ##### Timer Complementary PWM functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Start the Complementary PWM.
+    (+) Stop the Complementary PWM.
+    (+) Start the Complementary PWM and enable interrupts.
+    (+) Stop the Complementary PWM and disable interrupts.
+    (+) Start the Complementary PWM and enable DMA transfers.
+    (+) Stop the Complementary PWM and disable DMA transfers.
+    (+) Start the Complementary Input Capture measurement.
+    (+) Stop the Complementary Input Capture.
+    (+) Start the Complementary Input Capture and enable interrupts.
+    (+) Stop the Complementary Input Capture and disable interrupts.
+    (+) Start the Complementary Input Capture and enable DMA transfers.
+    (+) Stop the Complementary Input Capture and disable DMA transfers.
+    (+) Start the Complementary One Pulse generation.
+    (+) Stop the Complementary One Pulse.
+    (+) Start the Complementary One Pulse and enable interrupts.
+    (+) Stop the Complementary One Pulse and disable interrupts.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the PWM signal generation on the complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  /* Enable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the PWM signal generation on the complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  /* Disable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the PWM signal generation in interrupt mode on the
+  *         complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the TIM Break interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+  /* Enable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the PWM signal generation in interrupt mode on the
+  *         complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the TIM Break interrupt (only if no more channel is active) */
+  if((READ_REG(htim->Instance->CCER) & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+  {
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+  }
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM PWM signal generation in DMA mode on the
+  *         complementary output
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData: The source Buffer address.
+  * @param  Length: The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if(((uint32_t)pData == 0 ) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+      /* Enable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+      /* Enable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+     /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+      /* Enable the TIM Capture/Compare 4 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the complementary PWM output  */
+     TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+    __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM PWM signal generation in DMA mode on the complementary
+  *         output
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the complementary PWM output */
+    TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions
+ *  @brief    Timer Complementary One Pulse functions
+ *
+ at verbatim
+  ==============================================================================
+                ##### Timer Complementary One Pulse functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Start the Complementary One Pulse generation.
+    (+) Stop the Complementary One Pulse.
+    (+) Start the Complementary One Pulse and enable interrupts.
+    (+) Stop the Complementary One Pulse and disable interrupts.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation on the complementary
+  *         output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+  {
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+  /* Enable the complementary One Pulse output */
+  TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation on the complementary
+  *         output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+  /* Disable the complementary One Pulse output */
+    TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+  /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation in interrupt mode on the
+  *         complementary channel.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+  /* Enable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+  /* Enable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+  /* Enable the complementary One Pulse output */
+  TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+  }
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation in interrupt mode on the
+  *         complementary channel.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+  /* Disable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+  /* Disable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+  /* Disable the complementary One Pulse output */
+  TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+   __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group5 Peripheral Control functions
+ *  @brief   	Peripheral Control functions
+ *
+ at verbatim
+  ==============================================================================
+                    ##### Peripheral Control functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+    (+) Configure External Clock source.
+    (+) Configure Complementary channels, break features and dead time.
+    (+) Configure Master and the Slave synchronization.
+    (+) Configure the commutation event in case of use of the Hall sensor interface.
+    (+) Configure the DMA Burst Mode.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Configure the TIM commutation event sequence.
+  * @note  This function is mandatory to use the commutation event in order to
+  *        update the configuration at each commutation detection on the TRGI input of the Timer,
+  *        the typical use of this feature is with the use of another Timer(interface Timer)
+  *        configured in Hall sensor interface, this interface Timer will generate the
+  *        commutation at its TRGO output (connected to Timer used in this function) each time
+  *        the TI1 of the Interface Timer detect a commutation at its input TI1.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0: Internal trigger 0 selected
+  *            @arg TIM_TS_ITR1: Internal trigger 1 selected
+  *            @arg TIM_TS_ITR2: Internal trigger 2 selected
+  *            @arg TIM_TS_ITR3: Internal trigger 3 selected
+  *            @arg TIM_TS_NONE: No trigger is needed
+  * @param  CommutationSource: the Commutation Event source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+  *            @arg TIM_COMMUTATION_SOFTWARE:  Commutation source is set by software using the COMG bit
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+  __HAL_LOCK(htim);
+
+  if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+      (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+  {
+    /* Select the Input trigger */
+    htim->Instance->SMCR &= ~TIM_SMCR_TS;
+    htim->Instance->SMCR |= InputTrigger;
+  }
+
+  /* Select the Capture Compare preload feature */
+  htim->Instance->CR2 |= TIM_CR2_CCPC;
+  /* Select the Commutation event source */
+  htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+  htim->Instance->CR2 |= CommutationSource;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the TIM commutation event sequence with interrupt.
+  * @note  This function is mandatory to use the commutation event in order to
+  *        update the configuration at each commutation detection on the TRGI input of the Timer,
+  *        the typical use of this feature is with the use of another Timer(interface Timer)
+  *        configured in Hall sensor interface, this interface Timer will generate the
+  *        commutation at its TRGO output (connected to Timer used in this function) each time
+  *        the TI1 of the Interface Timer detect a commutation at its input TI1.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0: Internal trigger 0 selected
+  *            @arg TIM_TS_ITR1: Internal trigger 1 selected
+  *            @arg TIM_TS_ITR2: Internal trigger 2 selected
+  *            @arg TIM_TS_ITR3: Internal trigger 3 selected
+  *            @arg TIM_TS_NONE: No trigger is needed
+  * @param  CommutationSource: the Commutation Event source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+  *            @arg TIM_COMMUTATION_SOFTWARE:  Commutation source is set by software using the COMG bit
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+  __HAL_LOCK(htim);
+
+  if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+      (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+  {
+    /* Select the Input trigger */
+    htim->Instance->SMCR &= ~TIM_SMCR_TS;
+    htim->Instance->SMCR |= InputTrigger;
+  }
+
+  /* Select the Capture Compare preload feature */
+  htim->Instance->CR2 |= TIM_CR2_CCPC;
+  /* Select the Commutation event source */
+  htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+  htim->Instance->CR2 |= CommutationSource;
+
+  /* Enable the Commutation Interrupt Request */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the TIM commutation event sequence with DMA.
+  * @note  This function is mandatory to use the commutation event in order to
+  *        update the configuration at each commutation detection on the TRGI input of the Timer,
+  *        the typical use of this feature is with the use of another Timer(interface Timer)
+  *        configured in Hall sensor interface, this interface Timer will generate the
+  *        commutation at its TRGO output (connected to Timer used in this function) each time
+  *        the TI1 of the Interface Timer detect a commutation at its input TI1.
+  * @note: The user should configure the DMA in his own software, in This function only the COMDE bit is set
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0: Internal trigger 0 selected
+  *            @arg TIM_TS_ITR1: Internal trigger 1 selected
+  *            @arg TIM_TS_ITR2: Internal trigger 2 selected
+  *            @arg TIM_TS_ITR3: Internal trigger 3 selected
+  *            @arg TIM_TS_NONE: No trigger is needed
+  * @param  CommutationSource: the Commutation Event source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+  *            @arg TIM_COMMUTATION_SOFTWARE:  Commutation source is set by software using the COMG bit
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+  __HAL_LOCK(htim);
+
+  if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+      (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+  {
+    /* Select the Input trigger */
+    htim->Instance->SMCR &= ~TIM_SMCR_TS;
+    htim->Instance->SMCR |= InputTrigger;
+  }
+
+  /* Select the Capture Compare preload feature */
+  htim->Instance->CR2 |= TIM_CR2_CCPC;
+  /* Select the Commutation event source */
+  htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+  htim->Instance->CR2 |= CommutationSource;
+
+  /* Enable the Commutation DMA Request */
+  /* Set the DMA Commutation Callback */
+  htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+  /* Set the DMA error callback */
+  htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError;
+
+  /* Enable the Commutation DMA Request */
+  __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the TIM in master mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sMasterConfig: pointer to a TIM_MasterConfigTypeDef structure that
+  *         contains the selected trigger output (TRGO) and the Master/Slave
+  *         mode.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+  assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Reset the MMS Bits */
+  htim->Instance->CR2 &= ~TIM_CR2_MMS;
+  /* Select the TRGO source */
+  htim->Instance->CR2 |= sMasterConfig->MasterOutputTrigger;
+
+  /* Reset the MSM Bit */
+  htim->Instance->SMCR &= ~TIM_SMCR_MSM;
+  /* Set or Reset the MSM Bit */
+  htim->Instance->SMCR |= sMasterConfig->MasterSlaveMode;
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief   Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+  *         and the AOE(automatic output enable).
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sBreakDeadTimeConfig: pointer to a TIM_ConfigBreakDeadConfig_TypeDef structure that
+  *         contains the BDTR Register configuration  information for the TIM peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+                                              TIM_BreakDeadTimeConfigTypeDef * sBreakDeadTimeConfig)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+  assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+  assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+  assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+  assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+  assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+  assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+     the OSSI State, the dead time value and the Automatic Output Enable Bit */
+  htim->Instance->BDTR = (uint32_t)sBreakDeadTimeConfig->OffStateRunMode  |
+                                   sBreakDeadTimeConfig->OffStateIDLEMode |
+                                   sBreakDeadTimeConfig->LockLevel        |
+                                   sBreakDeadTimeConfig->DeadTime         |
+                                   sBreakDeadTimeConfig->BreakState       |
+                                   sBreakDeadTimeConfig->BreakPolarity    |
+                                   sBreakDeadTimeConfig->AutomaticOutput;
+
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the TIM2, TIM5 and TIM11 Remapping input capabilities.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Remap: specifies the TIM input remapping source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 input is connected to TIM8 Trigger output(default)
+  *            @arg TIM_TIM2_ETH_PTP:   TIM2 ITR1 input is connected to ETH PTP trigger output.
+  *            @arg TIM_TIM2_USBFS_SOF: TIM2 ITR1 input is connected to USB FS SOF.
+  *            @arg TIM_TIM2_USBHS_SOF: TIM2 ITR1 input is connected to USB HS SOF.
+  *            @arg TIM_TIM5_GPIO:      TIM5 CH4 input is connected to dedicated Timer pin(default)
+  *            @arg TIM_TIM5_LSI:       TIM5 CH4 input is connected to LSI clock.
+  *            @arg TIM_TIM5_LSE:       TIM5 CH4 input is connected to LSE clock.
+  *            @arg TIM_TIM5_RTC:       TIM5 CH4 input is connected to RTC Output event.
+  *            @arg TIM_TIM11_GPIO:     TIM11 CH4 input is connected to dedicated Timer pin(default)
+  *            @arg TIM_TIM11_HSE:      TIM11 CH4 input is connected to HSE_RTC clock
+  *                                     (HSE divided by a programmable prescaler)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
+{
+  __HAL_LOCK(htim);
+
+  /* Check parameters */
+  assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_REMAP(Remap));
+
+  /* Set the Timer remapping configuration */
+  htim->Instance->OR = Remap;
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions
+ *  @brief   Extension Callbacks functions
+ *
+ at verbatim
+  ==============================================================================
+                    ##### Extension Callbacks functions #####
+  ==============================================================================
+  [..]
+    This section provides Extension TIM callback functions:
+    (+) Timer Commutation callback
+    (+) Timer Break callback
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Hall commutation changed callback in non blocking mode
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIMEx_CommutationCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Hall Break detection callback in non blocking mode
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIMEx_BreakCallback could be implemented in the user file
+   */
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group7 Extension Peripheral State functions
+ *  @brief   Extension Peripheral State functions
+ *
+ at verbatim
+  ==============================================================================
+                ##### Extension Peripheral State functions #####
+  ==============================================================================
+  [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the TIM Hall Sensor interface state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  TIM DMA Commutation callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  htim->State= HAL_TIM_STATE_READY;
+
+  HAL_TIMEx_CommutationCallback(htim);
+}
+/**
+  * @}
+  */
+
+/**
+  * @brief  Enables or disables the TIM Capture Compare Channel xN.
+  * @param  TIMx to select the TIM peripheral
+  * @param  Channel: specifies the TIM Channel
+  *          This parameter can be one of the following values:
+  *            @arg TIM_Channel_1: TIM Channel 1
+  *            @arg TIM_Channel_2: TIM Channel 2
+  *            @arg TIM_Channel_3: TIM Channel 3
+  * @param  ChannelNState: specifies the TIM Channel CCxNE bit new state.
+  *          This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
+  * @retval None
+  */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState)
+{
+  uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CC4_INSTANCE(TIMx));
+  assert_param(IS_TIM_COMPLEMENTARY_CHANNELS(Channel));
+
+  tmp = TIM_CCER_CC1NE << Channel;
+
+  /* Reset the CCxNE Bit */
+  TIMx->CCER &= ~tmp;
+
+  /* Set or reset the CCxNE Bit */
+  TIMx->CCER |= (uint32_t)(ChannelNState << Channel);
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c
new file mode 100644
index 0000000..5fc90fc
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c
@@ -0,0 +1,1932 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_uart.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   UART HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State and Errors functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    The UART HAL driver can be used as follows:
+
+    (#) Declare a UART_HandleTypeDef handle structure.
+
+    (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API:
+        (##) Enable the USARTx interface clock.
+        (##) UART pins configuration:
+            (+++) Enable the clock for the UART GPIOs.
+            (+++) Configure these UART pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT()
+             and HAL_UART_Receive_IT() APIs):
+            (+++) Configure the USARTx interrupt priority.
+            (+++) Enable the NVIC USART IRQ handle.
+        (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA()
+             and HAL_UART_Receive_DMA() APIs):
+            (+++) Declare a DMA handle structure for the Tx/Rx stream.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required
+                  Tx/Rx parameters.
+            (+++) Configure the DMA Tx/Rx Stream.
+            (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete
+                  interrupt on the DMA Tx/Rx Stream.
+
+    (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware
+        flow control and Mode(Receiver/Transmitter) in the Init structure.
+
+    (#) For the UART asynchronous mode, initialize the UART registers by calling
+        the HAL_UART_Init() API.
+
+    (#) For the UART Half duplex mode, initialize the UART registers by calling
+        the HAL_HalfDuplex_Init() API.
+
+    (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API.
+
+    (#) For the Multi-Processor mode, initialize the UART registers by calling
+        the HAL_MultiProcessor_Init() API.
+
+     [..]
+       (@) The specific UART interrupts (Transmission complete interrupt,
+            RXNE interrupt and Error Interrupts) will be managed using the macros
+            __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit
+            and receive process.
+
+     [..]
+       (@) These APIs (HAL_UART_Init() and HAL_HalfDuplex_Init()) configure also the
+            low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customized
+            HAL_UART_MspInit() API.
+
+     [..]
+        Three operation modes are available within this driver :
+
+     *** Polling mode IO operation ***
+     =================================
+     [..]
+       (+) Send an amount of data in blocking mode using HAL_UART_Transmit()
+       (+) Receive an amount of data in blocking mode using HAL_UART_Receive()
+
+     *** Interrupt mode IO operation ***
+     ===================================
+     [..]
+       (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT()
+       (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
+            add his own code by customization of function pointer HAL_UART_TxCpltCallback
+       (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT()
+       (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
+            add his own code by customization of function pointer HAL_UART_RxCpltCallback
+       (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_UART_ErrorCallback
+
+     *** DMA mode IO operation ***
+     ==============================
+     [..]
+       (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA()
+       (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can
+            add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback
+       (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
+            add his own code by customization of function pointer HAL_UART_TxCpltCallback
+       (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA()
+       (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can
+            add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback
+       (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
+            add his own code by customization of function pointer HAL_UART_RxCpltCallback
+       (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_UART_ErrorCallback
+       (+) Pause the DMA Transfer using HAL_UART_DMAPause()
+       (+) Resume the DMA Transfer using HAL_UART_DMAResume()
+       (+) Stop the DMA Transfer using HAL_UART_DMAStop()
+
+     *** UART HAL driver macros list ***
+     =============================================
+     [..]
+       Below the list of most used macros in UART HAL driver.
+
+      (+) __HAL_UART_ENABLE: Enable the UART peripheral
+      (+) __HAL_UART_DISABLE: Disable the UART peripheral
+      (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not
+      (+) __HAL_UART_CLEAR_FLAG : Clear the specified UART pending flag
+      (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt
+      (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt
+      (+) __HAL_UART_GET_IT_SOURCE: Check whether the specified UART interrupt has occurred or not
+
+     [..]
+       (@) You can refer to the UART HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup UART UART
+  * @brief HAL UART module driver
+  * @{
+  */
+#ifdef HAL_UART_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup UART_Private_Constants
+  * @{
+  */
+#define UART_TIMEOUT_VALUE  22000
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup UART_Private_Functions   UART Private Functions
+  * @{
+  */
+static void UART_SetConfig (UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart);
+static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup UART_Exported_Functions UART Exported Functions
+  * @{
+  */
+
+/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+ at verbatim
+===============================================================================
+            ##### Initialization and Configuration functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
+    in asynchronous mode.
+      (+) For the asynchronous mode only these parameters can be configured:
+        (++) Baud Rate
+        (++) Word Length
+        (++) Stop Bit
+        (++) Parity: If the parity is enabled, then the MSB bit of the data written
+             in the data register is transmitted but is changed by the parity bit.
+             Depending on the frame length defined by the M bit (8-bits or 9-bits),
+             please refer to Reference manual for possible UART frame formats.
+        (++) Hardware flow control
+        (++) Receiver/transmitter modes
+        (++) Over Sampling Method
+    [..]
+    The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs
+    follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor
+    configuration procedures (details for the procedures are available in reference manual (RM0329)).
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the UART mode according to the specified parameters in
+  *         the UART_InitTypeDef and create the associated handle.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart)
+{
+  /* Check the UART handle allocation */
+  if(huart == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE)
+  {
+    /* The hardware flow control is available only for USART1, USART2, USART3 and USART6 */
+    assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance));
+    assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl));
+  }
+  else
+  {
+    assert_param(IS_UART_INSTANCE(huart->Instance));
+  }
+  assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
+  assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
+
+  if(huart->State == HAL_UART_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    huart->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_UART_MspInit(huart);
+  }
+
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /* Disable the peripheral */
+  __HAL_UART_DISABLE(huart);
+
+  /* Set the UART Communication parameters */
+  UART_SetConfig(huart);
+
+  /* In asynchronous mode, the following bits must be kept cleared:
+     - LINEN and CLKEN bits in the USART_CR2 register,
+     - SCEN, HDSEL and IREN  bits in the USART_CR3 register.*/
+  huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
+  huart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
+
+  /* Enable the peripheral */
+  __HAL_UART_ENABLE(huart);
+
+  /* Initialize the UART state */
+  huart->ErrorCode = HAL_UART_ERROR_NONE;
+  huart->State= HAL_UART_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the half-duplex mode according to the specified
+  *         parameters in the UART_InitTypeDef and create the associated handle.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart)
+{
+  /* Check the UART handle allocation */
+  if(huart == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_UART_INSTANCE(huart->Instance));
+  assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
+  assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
+
+  if(huart->State == HAL_UART_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    huart->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_UART_MspInit(huart);
+  }
+
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /* Disable the peripheral */
+  __HAL_UART_DISABLE(huart);
+
+  /* Set the UART Communication parameters */
+  UART_SetConfig(huart);
+
+  /* In half-duplex mode, the following bits must be kept cleared:
+     - LINEN and CLKEN bits in the USART_CR2 register,
+     - SCEN and IREN bits in the USART_CR3 register.*/
+  huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
+  huart->Instance->CR3 &= ~(USART_CR3_IREN | USART_CR3_SCEN);
+
+  /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
+  huart->Instance->CR3 |= USART_CR3_HDSEL;
+
+  /* Enable the peripheral */
+  __HAL_UART_ENABLE(huart);
+
+  /* Initialize the UART state*/
+  huart->ErrorCode = HAL_UART_ERROR_NONE;
+  huart->State= HAL_UART_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the LIN mode according to the specified
+  *         parameters in the UART_InitTypeDef and create the associated handle.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @param  BreakDetectLength: Specifies the LIN break detection length.
+  *         This parameter can be one of the following values:
+  *            @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection
+  *            @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength)
+{
+  /* Check the UART handle allocation */
+  if(huart == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_UART_INSTANCE(huart->Instance));
+  assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength));
+  assert_param(IS_UART_LIN_WORD_LENGTH(huart->Init.WordLength));
+  assert_param(IS_UART_LIN_OVERSAMPLING(huart->Init.OverSampling));
+
+  if(huart->State == HAL_UART_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    huart->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_UART_MspInit(huart);
+  }
+
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /* Disable the peripheral */
+  __HAL_UART_DISABLE(huart);
+
+  /* Set the UART Communication parameters */
+  UART_SetConfig(huart);
+
+  /* In LIN mode, the following bits must be kept cleared:
+     - LINEN and CLKEN bits in the USART_CR2 register,
+     - SCEN and IREN bits in the USART_CR3 register.*/
+  huart->Instance->CR2 &= ~(USART_CR2_CLKEN);
+  huart->Instance->CR3 &= ~(USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN);
+
+  /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
+  huart->Instance->CR2 |= USART_CR2_LINEN;
+
+  /* Set the USART LIN Break detection length. */
+  huart->Instance->CR2 &= ~(USART_CR2_LBDL);
+  huart->Instance->CR2 |= BreakDetectLength;
+
+  /* Enable the peripheral */
+  __HAL_UART_ENABLE(huart);
+
+  /* Initialize the UART state*/
+  huart->ErrorCode = HAL_UART_ERROR_NONE;
+  huart->State= HAL_UART_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the Multi-Processor mode according to the specified
+  *         parameters in the UART_InitTypeDef and create the associated handle.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @param  Address: USART address
+  * @param  WakeUpMethod: specifies the USART wake-up method.
+  *          This parameter can be one of the following values:
+  *            @arg UART_WAKEUPMETHOD_IDLELINE: Wake-up by an idle line detection
+  *            @arg UART_WAKEUPMETHOD_ADDRESSMARK: Wake-up by an address mark
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod)
+{
+  /* Check the UART handle allocation */
+  if(huart == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_UART_INSTANCE(huart->Instance));
+  assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod));
+  assert_param(IS_UART_ADDRESS(Address));
+  assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
+  assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
+
+  if(huart->State == HAL_UART_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    huart->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_UART_MspInit(huart);
+  }
+
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /* Disable the peripheral */
+  __HAL_UART_DISABLE(huart);
+
+  /* Set the UART Communication parameters */
+  UART_SetConfig(huart);
+
+  /* In Multi-Processor mode, the following bits must be kept cleared:
+     - LINEN and CLKEN bits in the USART_CR2 register,
+     - SCEN, HDSEL and IREN  bits in the USART_CR3 register */
+  huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
+  huart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
+
+  /* Clear the USART address */
+  huart->Instance->CR2 &= ~(USART_CR2_ADD);
+  /* Set the USART address node */
+  huart->Instance->CR2 |= Address;
+
+  /* Set the wake up method by setting the WAKE bit in the CR1 register */
+  huart->Instance->CR1 &= ~(USART_CR1_WAKE);
+  huart->Instance->CR1 |= WakeUpMethod;
+
+  /* Enable the peripheral */
+  __HAL_UART_ENABLE(huart);
+
+  /* Initialize the UART state */
+  huart->ErrorCode = HAL_UART_ERROR_NONE;
+  huart->State= HAL_UART_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the UART peripheral.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart)
+{
+  /* Check the UART handle allocation */
+  if(huart == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_UART_INSTANCE(huart->Instance));
+
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /* DeInit the low level hardware */
+  HAL_UART_MspDeInit(huart);
+
+  huart->ErrorCode = HAL_UART_ERROR_NONE;
+  huart->State = HAL_UART_STATE_RESET;
+
+  /* Process Lock */
+  __HAL_UNLOCK(huart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  UART MSP Init.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval None
+  */
+ __weak void HAL_UART_MspInit(UART_HandleTypeDef *huart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_UART_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  UART MSP DeInit.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval None
+  */
+ __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_UART_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup UART_Exported_Functions_Group2 IO operation functions
+  *  @brief UART Transmit and Receive functions
+  *
+ at verbatim
+  ==============================================================================
+                      ##### IO operation functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to manage the UART asynchronous
+    and Half duplex data transfers.
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode: The communication is performed in polling mode.
+            The HAL status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) Non blocking mode: The communication is performed using Interrupts
+            or DMA, these APIs return the HAL status.
+            The end of the data processing will be indicated through the
+            dedicated UART IRQ when using Interrupt mode or the DMA IRQ when
+            using DMA mode.
+            The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks
+            will be executed respectively at the end of the transmit or receive process.
+            The HAL_UART_ErrorCallback() user callback will be executed when
+            a communication error is detected.
+
+    (#) Blocking mode APIs are:
+        (++) HAL_UART_Transmit()
+        (++) HAL_UART_Receive()
+
+    (#) Non Blocking mode APIs with Interrupt are:
+        (++) HAL_UART_Transmit_IT()
+        (++) HAL_UART_Receive_IT()
+        (++) HAL_UART_IRQHandler()
+
+    (#) Non Blocking mode functions with DMA are:
+        (++) HAL_UART_Transmit_DMA()
+        (++) HAL_UART_Receive_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in non blocking mode:
+        (++) HAL_UART_TxCpltCallback()
+        (++) HAL_UART_RxCpltCallback()
+        (++) HAL_UART_ErrorCallback()
+
+    [..]
+      (@) In the Half duplex communication, it is forbidden to run the transmit
+          and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX
+          can't be useful.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sends an amount of data in blocking mode.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = huart->State;
+  if((tmp1 == HAL_UART_STATE_READY) || (tmp1 == HAL_UART_STATE_BUSY_RX))
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(huart);
+
+    huart->ErrorCode = HAL_UART_ERROR_NONE;
+    /* Check if a non-blocking receive process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_RX)
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX;
+    }
+
+    huart->TxXferSize = Size;
+    huart->TxXferCount = Size;
+    while(huart->TxXferCount > 0)
+    {
+      huart->TxXferCount--;
+      if(huart->Init.WordLength == UART_WORDLENGTH_9B)
+      {
+        if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        tmp = (uint16_t*) pData;
+        huart->Instance->DR = (*tmp & (uint16_t)0x01FF);
+        if(huart->Init.Parity == UART_PARITY_NONE)
+        {
+          pData +=2;
+        }
+        else
+        {
+          pData +=1;
+        }
+      }
+      else
+      {
+        if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        huart->Instance->DR = (*pData++ & (uint8_t)0xFF);
+      }
+    }
+
+    if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Check if a non-blocking receive process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+    {
+      huart->State = HAL_UART_STATE_BUSY_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_READY;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(huart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in blocking mode.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = huart->State;
+  if((tmp1 == HAL_UART_STATE_READY) || (tmp1 == HAL_UART_STATE_BUSY_TX))
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(huart);
+
+    huart->ErrorCode = HAL_UART_ERROR_NONE;
+    /* Check if a non-blocking transmit process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX)
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_BUSY_RX;
+    }
+
+    huart->RxXferSize = Size;
+    huart->RxXferCount = Size;
+
+    /* Check the remain data to be received */
+    while(huart->RxXferCount > 0)
+    {
+      huart->RxXferCount--;
+      if(huart->Init.WordLength == UART_WORDLENGTH_9B)
+      {
+        if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        tmp = (uint16_t*) pData ;
+        if(huart->Init.Parity == UART_PARITY_NONE)
+        {
+          *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF);
+          pData +=2;
+        }
+        else
+        {
+          *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF);
+          pData +=1;
+        }
+
+      }
+      else
+      {
+        if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        if(huart->Init.Parity == UART_PARITY_NONE)
+        {
+          *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF);
+        }
+        else
+        {
+          *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F);
+        }
+
+      }
+    }
+
+    /* Check if a non-blocking transmit process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_READY;
+    }
+    /* Process Unlocked */
+    __HAL_UNLOCK(huart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Sends an amount of data in non blocking mode.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+  uint32_t tmp = 0;
+
+  tmp = huart->State;
+  if((tmp == HAL_UART_STATE_READY) || (tmp == HAL_UART_STATE_BUSY_RX))
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(huart);
+
+    huart->pTxBuffPtr = pData;
+    huart->TxXferSize = Size;
+    huart->TxXferCount = Size;
+
+    huart->ErrorCode = HAL_UART_ERROR_NONE;
+    /* Check if a receive process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_RX)
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX;
+    }
+
+    /* Enable the UART Parity Error Interrupt */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_PE);
+
+    /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(huart);
+
+    /* Enable the UART Transmit data register empty Interrupt */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_TXE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in non blocking mode
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+  uint32_t tmp = 0;
+
+  tmp = huart->State;
+  if((tmp == HAL_UART_STATE_READY) || (tmp == HAL_UART_STATE_BUSY_TX))
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(huart);
+
+    huart->pRxBuffPtr = pData;
+    huart->RxXferSize = Size;
+    huart->RxXferCount = Size;
+
+    huart->ErrorCode = HAL_UART_ERROR_NONE;
+    /* Check if a transmit process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX)
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_BUSY_RX;
+    }
+
+    /* Enable the UART Parity Error Interrupt */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_PE);
+
+    /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(huart);
+
+    /* Enable the UART Data Register not empty Interrupt */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Sends an amount of data in non blocking mode.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = huart->State;
+  if((tmp1 == HAL_UART_STATE_READY) || (tmp1 == HAL_UART_STATE_BUSY_RX))
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(huart);
+
+    huart->pTxBuffPtr = pData;
+    huart->TxXferSize = Size;
+    huart->TxXferCount = Size;
+
+    huart->ErrorCode = HAL_UART_ERROR_NONE;
+    /* Check if a receive process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_RX)
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX;
+    }
+
+    /* Set the UART DMA transfer complete callback */
+    huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt;
+
+    /* Set the UART DMA Half transfer complete callback */
+    huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt;
+
+    /* Set the DMA error callback */
+    huart->hdmatx->XferErrorCallback = UART_DMAError;
+
+    /* Enable the UART transmit DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->DR, Size);
+
+    /* Clear the TC flag in the SR register by writing 0 to it */
+    __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC);
+
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the UART CR3 register */
+    huart->Instance->CR3 |= USART_CR3_DMAT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(huart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in non blocking mode.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @note   When the UART parity is enabled (PCE = 1) the data received contain the parity bit.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = huart->State;
+  if((tmp1 == HAL_UART_STATE_READY) || (tmp1 == HAL_UART_STATE_BUSY_TX))
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(huart);
+
+    huart->pRxBuffPtr = pData;
+    huart->RxXferSize = Size;
+
+    huart->ErrorCode = HAL_UART_ERROR_NONE;
+    /* Check if a transmit process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX)
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_BUSY_RX;
+    }
+
+    /* Set the UART DMA transfer complete callback */
+    huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
+
+    /* Set the UART DMA Half transfer complete callback */
+    huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
+
+    /* Set the DMA error callback */
+    huart->hdmarx->XferErrorCallback = UART_DMAError;
+
+    /* Enable the DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t*)tmp, Size);
+
+    /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+    in the UART CR3 register */
+    huart->Instance->CR3 |= USART_CR3_DMAR;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(huart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Pauses the DMA Transfer.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart)
+{
+  /* Process Locked */
+  __HAL_LOCK(huart);
+
+  if(huart->State == HAL_UART_STATE_BUSY_TX)
+  {
+    /* Disable the UART DMA Tx request */
+    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+  }
+  else if(huart->State == HAL_UART_STATE_BUSY_RX)
+  {
+    /* Disable the UART DMA Rx request */
+    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+  }
+  else if (huart->State == HAL_UART_STATE_BUSY_TX_RX)
+  {
+    /* Disable the UART DMA Tx & Rx requests */
+    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(huart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the DMA Transfer.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart)
+{
+  /* Process Locked */
+  __HAL_LOCK(huart);
+
+  if(huart->State == HAL_UART_STATE_BUSY_TX)
+  {
+    /* Enable the UART DMA Tx request */
+    huart->Instance->CR3 |= USART_CR3_DMAT;
+  }
+  else if(huart->State == HAL_UART_STATE_BUSY_RX)
+  {
+    /* Clear the Overrun flag before resuming the Rx transfer*/
+    __HAL_UART_CLEAR_OREFLAG(huart);
+    /* Enable the UART DMA Rx request */
+    huart->Instance->CR3 |= USART_CR3_DMAR;
+  }
+  else if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+  {
+    /* Clear the Overrun flag before resuming the Rx transfer*/
+    __HAL_UART_CLEAR_OREFLAG(huart);
+    /* Enable the UART DMA Tx & Rx request */
+    huart->Instance->CR3 |= USART_CR3_DMAT;
+    huart->Instance->CR3 |= USART_CR3_DMAR;
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(huart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Stops the DMA Transfer.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart)
+{
+  /* The Lock is not implemented on this API to allow the user application
+     to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback():
+     when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+     and the correspond call back is executed HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback()
+     */
+
+  /* Disable the UART Tx/Rx DMA requests */
+  huart->Instance->CR3 &= ~USART_CR3_DMAT;
+  huart->Instance->CR3 &= ~USART_CR3_DMAR;
+
+  /* Abort the UART DMA tx Stream */
+  if(huart->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(huart->hdmatx);
+  }
+  /* Abort the UART DMA rx Stream */
+  if(huart->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(huart->hdmarx);
+  }
+
+  huart->State = HAL_UART_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles UART interrupt request.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval None
+  */
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_PE);
+  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_PE);
+  /* UART parity error interrupt occurred ------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    __HAL_UART_CLEAR_PEFLAG(huart);
+
+    huart->ErrorCode |= HAL_UART_ERROR_PE;
+  }
+
+  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_FE);
+  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR);
+  /* UART frame error interrupt occurred -------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    __HAL_UART_CLEAR_FEFLAG(huart);
+
+    huart->ErrorCode |= HAL_UART_ERROR_FE;
+  }
+
+  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_NE);
+  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR);
+  /* UART noise error interrupt occurred -------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    __HAL_UART_CLEAR_NEFLAG(huart);
+
+    huart->ErrorCode |= HAL_UART_ERROR_NE;
+  }
+
+  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_ORE);
+  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR);
+  /* UART Over-Run interrupt occurred ----------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    __HAL_UART_CLEAR_OREFLAG(huart);
+
+    huart->ErrorCode |= HAL_UART_ERROR_ORE;
+  }
+
+  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE);
+  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_RXNE);
+  /* UART in mode Receiver ---------------------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    UART_Receive_IT(huart);
+  }
+
+  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_TXE);
+  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_TXE);
+  /* UART in mode Transmitter ------------------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    UART_Transmit_IT(huart);
+  }
+
+  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_TC);
+  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC);
+  /* UART in mode Transmitter end --------------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    UART_EndTransmit_IT(huart);
+  }
+
+  if(huart->ErrorCode != HAL_UART_ERROR_NONE)
+  {
+    /* Set the UART state ready to be able to start again the process */
+    huart->State = HAL_UART_STATE_READY;
+
+    HAL_UART_ErrorCallback(huart);
+  }
+}
+
+/**
+  * @brief  Tx Transfer completed callbacks.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval None
+  */
+ __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_UART_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tx Half Transfer completed callbacks.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval None
+  */
+ __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_UART_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Transfer completed callbacks.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval None
+  */
+__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_UART_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Half Transfer completed callbacks.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval None
+  */
+__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_UART_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  UART error callbacks.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval None
+  */
+ __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_UART_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions
+  *  @brief   UART control functions
+  *
+ at verbatim
+  ==============================================================================
+                      ##### Peripheral Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control the UART:
+    (+) HAL_LIN_SendBreak() API can be helpful to transmit the break character.
+    (+) HAL_MultiProcessor_EnterMuteMode() API can be helpful to enter the UART in mute mode.
+    (+) HAL_MultiProcessor_ExitMuteMode() API can be helpful to exit the UART mute mode by software.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Transmits break characters.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart)
+{
+  /* Check the parameters */
+  assert_param(IS_UART_INSTANCE(huart->Instance));
+
+  /* Process Locked */
+  __HAL_LOCK(huart);
+
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /* Send break characters */
+  huart->Instance->CR1 |= USART_CR1_SBK;
+
+  huart->State = HAL_UART_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(huart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enters the UART in mute mode.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart)
+{
+  /* Check the parameters */
+  assert_param(IS_UART_INSTANCE(huart->Instance));
+
+  /* Process Locked */
+  __HAL_LOCK(huart);
+
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /* Enable the USART mute mode  by setting the RWU bit in the CR1 register */
+  huart->Instance->CR1 |= USART_CR1_RWU;
+
+  huart->State = HAL_UART_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(huart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Exits the UART mute mode: wake up software.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart)
+{
+  /* Check the parameters */
+  assert_param(IS_UART_INSTANCE(huart->Instance));
+
+  /* Process Locked */
+  __HAL_LOCK(huart);
+
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */
+  huart->Instance->CR1 &= (uint32_t)~((uint32_t)USART_CR1_RWU);
+
+  huart->State = HAL_UART_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(huart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the UART transmitter and disables the UART receiver.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart)
+{
+  uint32_t tmpreg = 0x00;
+
+  /* Process Locked */
+  __HAL_LOCK(huart);
+
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /*-------------------------- USART CR1 Configuration -----------------------*/
+  tmpreg = huart->Instance->CR1;
+
+  /* Clear TE and RE bits */
+  tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
+
+  /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */
+  tmpreg |= (uint32_t)USART_CR1_TE;
+
+  /* Write to USART CR1 */
+  huart->Instance->CR1 = (uint32_t)tmpreg;
+
+  huart->State = HAL_UART_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(huart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the UART receiver and disables the UART transmitter.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart)
+{
+  uint32_t tmpreg = 0x00;
+
+  /* Process Locked */
+  __HAL_LOCK(huart);
+
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /*-------------------------- USART CR1 Configuration -----------------------*/
+  tmpreg = huart->Instance->CR1;
+
+  /* Clear TE and RE bits */
+  tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
+
+  /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */
+  tmpreg |= (uint32_t)USART_CR1_RE;
+
+  /* Write to USART CR1 */
+  huart->Instance->CR1 = (uint32_t)tmpreg;
+
+  huart->State = HAL_UART_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(huart);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Errors functions
+  *  @brief   UART State and Errors functions
+  *
+ at verbatim
+  ==============================================================================
+                 ##### Peripheral State and Errors functions #####
+  ==============================================================================
+ [..]
+   This subsection provides a set of functions allowing to return the State of
+   UART communication process, return Peripheral Errors occurred during communication
+   process
+   (+) HAL_UART_GetState() API can be helpful to check in run-time the state of the UART peripheral.
+   (+) HAL_UART_GetError() check in run-time errors that could be occurred during communication.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the UART state.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL state
+  */
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart)
+{
+  return huart->State;
+}
+
+/**
+* @brief  Return the UART error code
+* @param  huart : pointer to a UART_HandleTypeDef structure that contains
+  *              the configuration information for the specified UART.
+* @retval UART Error Code
+*/
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart)
+{
+  return huart->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  DMA UART transmit process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  /* DMA Normal mode*/
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    huart->TxXferCount = 0;
+
+    /* Disable the DMA transfer for transmit request by setting the DMAT bit
+       in the UART CR3 register */
+    huart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);
+
+    /* Enable the UART Transmit Complete Interrupt */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_TC);
+  }
+  /* DMA Circular mode */
+  else
+  {
+    HAL_UART_TxCpltCallback(huart);
+  }
+}
+
+/**
+  * @brief DMA UART transmit process half complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_UART_TxHalfCpltCallback(huart);
+}
+
+/**
+  * @brief  DMA UART receive process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  /* DMA Normal mode*/
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    huart->RxXferCount = 0;
+
+    /* Disable the DMA transfer for the receiver request by setting the DMAR bit
+       in the UART CR3 register */
+    huart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAR);
+
+    /* Check if a transmit process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_READY;
+    }
+  }
+  HAL_UART_RxCpltCallback(huart);
+}
+
+/**
+  * @brief DMA UART receive process half complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_UART_RxHalfCpltCallback(huart);
+}
+
+/**
+  * @brief  DMA UART communication error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void UART_DMAError(DMA_HandleTypeDef *hdma)
+{
+  UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  huart->RxXferCount = 0;
+  huart->TxXferCount = 0;
+  huart->State= HAL_UART_STATE_READY;
+  huart->ErrorCode |= HAL_UART_ERROR_DMA;
+  HAL_UART_ErrorCallback(huart);
+}
+
+/**
+  * @brief  This function handles UART Communication Timeout.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @param  Flag: specifies the UART flag to check.
+  * @param  Status: The new Flag status (SET or RESET).
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_UART_GET_FLAG(huart, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
+          __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+          __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
+          __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+
+          huart->State= HAL_UART_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(huart);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_UART_GET_FLAG(huart, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
+          __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+          __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
+          __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+
+          huart->State= HAL_UART_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(huart);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sends an amount of data in non blocking mode.
+  * @param  huart: Pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart)
+{
+  uint16_t* tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = huart->State;
+  if((tmp1 == HAL_UART_STATE_BUSY_TX) || (tmp1 == HAL_UART_STATE_BUSY_TX_RX))
+  {
+    if(huart->Init.WordLength == UART_WORDLENGTH_9B)
+    {
+      tmp = (uint16_t*) huart->pTxBuffPtr;
+      huart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
+      if(huart->Init.Parity == UART_PARITY_NONE)
+      {
+        huart->pTxBuffPtr += 2;
+      }
+      else
+      {
+        huart->pTxBuffPtr += 1;
+      }
+    }
+    else
+    {
+      huart->Instance->DR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0x00FF);
+    }
+
+    if(--huart->TxXferCount == 0)
+    {
+      /* Disable the UART Transmit Complete Interrupt */
+      __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
+
+      /* Enable the UART Transmit Complete Interrupt */
+      __HAL_UART_ENABLE_IT(huart, UART_IT_TC);
+    }
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+
+/**
+  * @brief  Wraps up transmission in non blocking mode.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart)
+{
+  /* Disable the UART Transmit Complete Interrupt */
+  __HAL_UART_DISABLE_IT(huart, UART_IT_TC);
+
+  /* Check if a receive process is ongoing or not */
+  if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+  {
+    huart->State = HAL_UART_STATE_BUSY_RX;
+  }
+  else
+  {
+    /* Disable the UART Parity Error Interrupt */
+    __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
+
+    /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+
+    huart->State = HAL_UART_STATE_READY;
+  }
+
+  HAL_UART_TxCpltCallback(huart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Receives an amount of data in non blocking mode
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart)
+{
+  uint16_t* tmp;
+  uint32_t tmp1 = 0;
+
+  tmp1 = huart->State;
+  if((tmp1 == HAL_UART_STATE_BUSY_RX) || (tmp1 == HAL_UART_STATE_BUSY_TX_RX))
+  {
+    if(huart->Init.WordLength == UART_WORDLENGTH_9B)
+    {
+      tmp = (uint16_t*) huart->pRxBuffPtr;
+      if(huart->Init.Parity == UART_PARITY_NONE)
+      {
+        *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF);
+        huart->pRxBuffPtr += 2;
+      }
+      else
+      {
+        *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF);
+        huart->pRxBuffPtr += 1;
+      }
+    }
+    else
+    {
+      if(huart->Init.Parity == UART_PARITY_NONE)
+      {
+        *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF);
+      }
+      else
+      {
+        *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F);
+      }
+    }
+
+    if(--huart->RxXferCount == 0)
+    {
+      __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+
+      /* Check if a transmit process is ongoing or not */
+      if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+      {
+        huart->State = HAL_UART_STATE_BUSY_TX;
+      }
+      else
+      {
+        /* Disable the UART Parity Error Interrupt */
+        __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
+
+        /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+        __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+
+        huart->State = HAL_UART_STATE_READY;
+      }
+      HAL_UART_RxCpltCallback(huart);
+
+      return HAL_OK;
+    }
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Configures the UART peripheral.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval None
+  */
+static void UART_SetConfig(UART_HandleTypeDef *huart)
+{
+  uint32_t tmpreg = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate));
+  assert_param(IS_UART_STOPBITS(huart->Init.StopBits));
+  assert_param(IS_UART_PARITY(huart->Init.Parity));
+  assert_param(IS_UART_MODE(huart->Init.Mode));
+
+  /*-------------------------- USART CR2 Configuration -----------------------*/
+  tmpreg = huart->Instance->CR2;
+
+  /* Clear STOP[13:12] bits */
+  tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP);
+
+  /* Configure the UART Stop Bits: Set STOP[13:12] bits according to huart->Init.StopBits value */
+  tmpreg |= (uint32_t)huart->Init.StopBits;
+
+  /* Write to USART CR2 */
+  huart->Instance->CR2 = (uint32_t)tmpreg;
+
+  /*-------------------------- USART CR1 Configuration -----------------------*/
+  tmpreg = huart->Instance->CR1;
+
+  /* Clear M, PCE, PS, TE and RE bits */
+  tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
+                                   USART_CR1_RE | USART_CR1_OVER8));
+
+  /* Configure the UART Word Length, Parity and mode:
+     Set the M bits according to huart->Init.WordLength value
+     Set PCE and PS bits according to huart->Init.Parity value
+     Set TE and RE bits according to huart->Init.Mode value
+     Set OVER8 bit according to huart->Init.OverSampling value */
+  tmpreg |= (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling;
+
+  /* Write to USART CR1 */
+  huart->Instance->CR1 = (uint32_t)tmpreg;
+
+  /*-------------------------- USART CR3 Configuration -----------------------*/
+  tmpreg = huart->Instance->CR3;
+
+  /* Clear CTSE and RTSE bits */
+  tmpreg &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));
+
+  /* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */
+  tmpreg |= huart->Init.HwFlowCtl;
+
+  /* Write to USART CR3 */
+  huart->Instance->CR3 = (uint32_t)tmpreg;
+
+  /* Check the Over Sampling */
+  if(huart->Init.OverSampling == UART_OVERSAMPLING_8)
+  {
+    /*-------------------------- USART BRR Configuration ---------------------*/
+    if((huart->Instance == USART1) || (huart->Instance == USART6))
+    {
+      huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
+    }
+    else
+    {
+      huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate);
+    }
+  }
+  else
+  {
+    /*-------------------------- USART BRR Configuration ---------------------*/
+    if((huart->Instance == USART1) || (huart->Instance == USART6))
+    {
+      huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
+    }
+    else
+    {
+      huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate);
+    }
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_UART_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c
new file mode 100644
index 0000000..bbf2323
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c
@@ -0,0 +1,1857 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_usart.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   USART HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Universal Synchronous Asynchronous Receiver Transmitter (USART) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    The USART HAL driver can be used as follows:
+
+    (#) Declare a USART_HandleTypeDef handle structure.
+    (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit () API:
+        (##) Enable the USARTx interface clock.
+        (##) USART pins configuration:
+             (+++) Enable the clock for the USART GPIOs.
+             (+++) Configure these USART pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(),
+             HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
+             (+++) Configure the USARTx interrupt priority.
+             (+++) Enable the NVIC USART IRQ handle.
+        (##) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA()
+             HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
+             (+++) Declare a DMA handle structure for the Tx/Rx stream.
+             (+++) Enable the DMAx interface clock.
+             (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+             (+++) Configure the DMA Tx/Rx Stream.
+             (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle.
+             (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
+
+    (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware
+        flow control and Mode(Receiver/Transmitter) in the husart Init structure.
+
+    (#) Initialize the USART registers by calling the HAL_USART_Init() API:
+        (++) These APIs configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+             by calling the customized HAL_USART_MspInit(&husart) API.
+
+        -@@- The specific USART interrupts (Transmission complete interrupt,
+             RXNE interrupt and Error Interrupts) will be managed using the macros
+             __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process.
+
+    (#) Three operation modes are available within this driver :
+
+     *** Polling mode IO operation ***
+     =================================
+     [..]
+       (+) Send an amount of data in blocking mode using HAL_USART_Transmit()
+       (+) Receive an amount of data in blocking mode using HAL_USART_Receive()
+
+     *** Interrupt mode IO operation ***
+     ===================================
+     [..]
+       (+) Send an amount of data in non blocking mode using HAL_USART_Transmit_IT()
+       (+) At transmission end of transfer HAL_USART_TxHalfCpltCallback is executed and user can
+            add his own code by customization of function pointer HAL_USART_TxCpltCallback
+       (+) Receive an amount of data in non blocking mode using HAL_USART_Receive_IT()
+       (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can
+            add his own code by customization of function pointer HAL_UART_RxCpltCallback
+       (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_USART_ErrorCallback
+
+     *** DMA mode IO operation ***
+     ==============================
+     [..]
+       (+) Send an amount of data in non blocking mode (DMA) using HAL_USART_Transmit_DMA()
+       (+) At transmission end of half transfer HAL_USART_TxHalfCpltCallback is executed and user can
+            add his own code by customization of function pointer HAL_USART_TxHalfCpltCallback
+       (+) At transmission end of transfer HAL_USART_TxCpltCallback is executed and user can
+            add his own code by customization of function pointer HAL_USART_TxCpltCallback
+       (+) Receive an amount of data in non blocking mode (DMA) using HAL_USART_Receive_DMA()
+       (+) At reception end of half transfer HAL_USART_RxHalfCpltCallback is executed and user can
+            add his own code by customization of function pointer HAL_USART_RxHalfCpltCallback
+       (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can
+            add his own code by customization of function pointer HAL_USART_RxCpltCallback
+       (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_USART_ErrorCallback
+       (+) Pause the DMA Transfer using HAL_USART_DMAPause()
+       (+) Resume the DMA Transfer using HAL_USART_DMAResume()
+       (+) Stop the DMA Transfer using HAL_USART_DMAStop()
+
+     *** USART HAL driver macros list ***
+     =============================================
+     [..]
+       Below the list of most used macros in USART HAL driver.
+
+       (+) __HAL_USART_ENABLE: Enable the USART peripheral
+       (+) __HAL_USART_DISABLE: Disable the USART peripheral
+       (+) __HAL_USART_GET_FLAG : Check whether the specified USART flag is set or not
+       (+) __HAL_USART_CLEAR_FLAG : Clear the specified USART pending flag
+       (+) __HAL_USART_ENABLE_IT: Enable the specified USART interrupt
+       (+) __HAL_USART_DISABLE_IT: Disable the specified USART interrupt
+
+     [..]
+       (@) You can refer to the USART HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup USART USART
+  * @brief HAL USART Synchronous module driver
+  * @{
+  */
+#ifdef HAL_USART_MODULE_ENABLED
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup USART_Private_Constants
+  * @{
+  */
+#define DUMMY_DATA           0xFFFF
+#define USART_TIMEOUT_VALUE  22000
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup USART_Private_Functions
+  * @{
+  */
+static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart);
+static void USART_SetConfig (USART_HandleTypeDef *husart);
+static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup USART_Exported_Functions USART Exported Functions
+  * @{
+  */
+
+/** @defgroup USART_Exported_Functions_Group1 USART Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+ at verbatim
+  ==============================================================================
+              ##### Initialization and Configuration functions #####
+  ==============================================================================
+  [..]
+  This subsection provides a set of functions allowing to initialize the USART
+  in asynchronous and in synchronous modes.
+  (+) For the asynchronous mode only these parameters can be configured:
+      (++) Baud Rate
+      (++) Word Length
+      (++) Stop Bit
+      (++) Parity: If the parity is enabled, then the MSB bit of the data written
+           in the data register is transmitted but is changed by the parity bit.
+           Depending on the frame length defined by the M bit (8-bits or 9-bits),
+           please refer to Reference manual for possible USART frame formats.
+      (++) USART polarity
+      (++) USART phase
+      (++) USART LastBit
+      (++) Receiver/transmitter modes
+
+  [..]
+    The HAL_USART_Init() function follows the USART  synchronous configuration
+    procedure (details for the procedure are available in reference manual (RM0329)).
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the USART mode according to the specified
+  *         parameters in the USART_InitTypeDef and create the associated handle.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart)
+{
+  /* Check the USART handle allocation */
+  if(husart == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_USART_INSTANCE(husart->Instance));
+
+  if(husart->State == HAL_USART_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    husart->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_USART_MspInit(husart);
+  }
+
+  husart->State = HAL_USART_STATE_BUSY;
+
+  /* Set the USART Communication parameters */
+  USART_SetConfig(husart);
+
+  /* In USART mode, the following bits must be kept cleared:
+     - LINEN bit in the USART_CR2 register
+     - HDSEL, SCEN and IREN bits in the USART_CR3 register */
+  husart->Instance->CR2 &= ~USART_CR2_LINEN;
+  husart->Instance->CR3 &= ~(USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL);
+
+  /* Enable the Peripheral */
+  __HAL_USART_ENABLE(husart);
+
+  /* Initialize the USART state */
+  husart->ErrorCode = HAL_USART_ERROR_NONE;
+  husart->State= HAL_USART_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the USART peripheral.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart)
+{
+   /* Check the USART handle allocation */
+  if(husart == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_USART_INSTANCE(husart->Instance));
+
+  husart->State = HAL_USART_STATE_BUSY;
+
+  /* Disable the Peripheral */
+  __HAL_USART_DISABLE(husart);
+
+  /* DeInit the low level hardware */
+  HAL_USART_MspDeInit(husart);
+
+  husart->ErrorCode = HAL_USART_ERROR_NONE;
+  husart->State = HAL_USART_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(husart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  USART MSP Init.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval None
+  */
+ __weak void HAL_USART_MspInit(USART_HandleTypeDef *husart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_USART_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  USART MSP DeInit.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval None
+  */
+ __weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_USART_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup USART_Exported_Functions_Group2 IO operation functions
+  *  @brief   USART Transmit and Receive functions
+  *
+ at verbatim
+  ==============================================================================
+                         ##### IO operation functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to manage the USART synchronous
+    data transfers.
+
+  [..]
+    The USART supports master mode only: it cannot receive or send data related to an input
+    clock (SCLK is always an output).
+
+    (#) There are two modes of transfer:
+        (++) Blocking mode: The communication is performed in polling mode.
+             The HAL status of all data processing is returned by the same function
+             after finishing transfer.
+        (++) No-Blocking mode: The communication is performed using Interrupts
+             or DMA, These API's return the HAL status.
+             The end of the data processing will be indicated through the
+             dedicated USART IRQ when using Interrupt mode or the DMA IRQ when
+             using DMA mode.
+             The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback()
+              user callbacks
+             will be executed respectively at the end of the transmit or Receive process
+             The HAL_USART_ErrorCallback() user callback will be executed when a communication
+             error is detected
+
+    (#) Blocking mode APIs are :
+        (++) HAL_USART_Transmit() in simplex mode
+        (++) HAL_USART_Receive() in full duplex receive only
+        (++) HAL_USART_TransmitReceive() in full duplex mode
+
+    (#) Non Blocking mode APIs with Interrupt are :
+        (++) HAL_USART_Transmit_IT()in simplex mode
+        (++) HAL_USART_Receive_IT() in full duplex receive only
+        (++) HAL_USART_TransmitReceive_IT() in full duplex mode
+        (++) HAL_USART_IRQHandler()
+
+    (#) Non Blocking mode functions with DMA are :
+        (++) HAL_USART_Transmit_DMA()in simplex mode
+        (++) HAL_USART_Receive_DMA() in full duplex receive only
+        (++) HAL_USART_TransmitReceie_DMA() in full duplex mode
+        (++) HAL_USART_DMAPause()
+        (++) HAL_USART_DMAResume()
+        (++) HAL_USART_DMAStop()
+
+    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_USART_TxHalfCpltCallback()
+        (++) HAL_USART_TxCpltCallback()
+        (++) HAL_USART_RxHalfCpltCallback()
+        (++) HAL_USART_RxCpltCallback()
+        (++) HAL_USART_ErrorCallback()
+        (++) HAL_USART_TxRxCpltCallback()
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Simplex Send an amount of data in blocking mode.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @param  pTxData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pTxData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_TX;
+
+    husart->TxXferSize = Size;
+    husart->TxXferCount = Size;
+    while(husart->TxXferCount > 0)
+    {
+      husart->TxXferCount--;
+      if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+      {
+        /* Wait for TC flag in order to write data in DR */
+        if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        tmp = (uint16_t*) pTxData;
+        husart->Instance->DR = (*tmp & (uint16_t)0x01FF);
+        if(husart->Init.Parity == USART_PARITY_NONE)
+        {
+          pTxData += 2;
+        }
+        else
+        {
+          pTxData += 1;
+        }
+      }
+      else
+      {
+        if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        husart->Instance->DR = (*pTxData++ & (uint8_t)0xFF);
+      }
+    }
+
+    if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    husart->State = HAL_USART_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Full-Duplex Receive an amount of data in blocking mode.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @param  pRxData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pRxData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_RX;
+
+    husart->RxXferSize = Size;
+    husart->RxXferCount = Size;
+    /* Check the remain data to be received */
+    while(husart->RxXferCount > 0)
+    {
+      husart->RxXferCount--;
+      if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+      {
+        /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */
+        if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        /* Send dummy byte in order to generate clock */
+        husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FF);
+
+        /* Wait for RXNE Flag */
+        if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        tmp = (uint16_t*) pRxData ;
+        if(husart->Init.Parity == USART_PARITY_NONE)
+        {
+          *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
+          pRxData +=2;
+        }
+        else
+        {
+          *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF);
+          pRxData +=1;
+        }
+      }
+      else
+      {
+        /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */
+        if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        /* Send Dummy Byte in order to generate clock */
+        husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x00FF);
+
+        /* Wait until RXNE flag is set to receive the byte */
+        if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        if(husart->Init.Parity == USART_PARITY_NONE)
+        {
+          /* Receive data */
+          *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
+        }
+        else
+        {
+          /* Receive data */
+          *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
+        }
+
+      }
+    }
+
+    husart->State = HAL_USART_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Full-Duplex Send receive an amount of data in full-duplex mode (blocking mode).
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @param  pTxData: Pointer to data transmitted buffer
+  * @param  pRxData: Pointer to data received buffer
+  * @param  Size: Amount of data to be sent
+   * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_RX;
+
+    husart->RxXferSize = Size;
+    husart->TxXferSize = Size;
+    husart->TxXferCount = Size;
+    husart->RxXferCount = Size;
+
+    /* Check the remain data to be received */
+    while(husart->TxXferCount > 0)
+    {
+      husart->TxXferCount--;
+      husart->RxXferCount--;
+      if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+      {
+        /* Wait for TC flag in order to write data in DR */
+        if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        tmp = (uint16_t*) pTxData;
+        husart->Instance->DR = (*tmp & (uint16_t)0x01FF);
+        if(husart->Init.Parity == USART_PARITY_NONE)
+        {
+          pTxData += 2;
+        }
+        else
+        {
+          pTxData += 1;
+        }
+
+        /* Wait for RXNE Flag */
+        if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        tmp = (uint16_t*) pRxData ;
+        if(husart->Init.Parity == USART_PARITY_NONE)
+        {
+          *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
+          pRxData += 2;
+        }
+        else
+        {
+          *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF);
+          pRxData += 1;
+        }
+      }
+      else
+      {
+        /* Wait for TC flag in order to write data in DR */
+        if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        husart->Instance->DR = (*pTxData++ & (uint8_t)0x00FF);
+
+        /* Wait for RXNE Flag */
+        if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        if(husart->Init.Parity == USART_PARITY_NONE)
+        {
+          /* Receive data */
+          *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
+        }
+        else
+        {
+          /* Receive data */
+          *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
+        }
+      }
+    }
+
+    husart->State = HAL_USART_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Simplex Send an amount of data in non-blocking mode.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @param  pTxData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  * @note   The USART errors are not managed to avoid the overrun error.
+  */
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
+{
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pTxData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->pTxBuffPtr = pTxData;
+    husart->TxXferSize = Size;
+    husart->TxXferCount = Size;
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_TX;
+
+    /* The USART Error Interrupts: (Frame error, Noise error, Overrun error)
+       are not managed by the USART transmit process to avoid the overrun interrupt
+       when the USART mode is configured for transmit and receive "USART_MODE_TX_RX"
+       to benefit for the frame error and noise interrupts the USART mode should be
+       configured only for transmit "USART_MODE_TX"
+       The __HAL_USART_ENABLE_IT(husart, USART_IT_ERR) can be used to enable the Frame error,
+       Noise error interrupt */
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    /* Enable the USART Transmit Data Register Empty Interrupt */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_TXE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Simplex Receive an amount of data in non-blocking mode.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @param  pRxData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
+{
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pRxData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->pRxBuffPtr = pRxData;
+    husart->RxXferSize = Size;
+    husart->RxXferCount = Size;
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_RX;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    /* Enable the USART Data Register not empty Interrupt */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_RXNE);
+
+    /* Enable the USART Parity Error Interrupt */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_PE);
+
+    /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_ERR);
+
+    /* Send dummy byte in order to generate the clock for the slave to send data */
+    husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FF);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking).
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @param  pTxData: Pointer to data transmitted buffer
+  * @param  pRxData: Pointer to data received buffer
+  * @param  Size: Amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,  uint16_t Size)
+{
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->pRxBuffPtr = pRxData;
+    husart->RxXferSize = Size;
+    husart->RxXferCount = Size;
+    husart->pTxBuffPtr = pTxData;
+    husart->TxXferSize = Size;
+    husart->TxXferCount = Size;
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_TX_RX;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    /* Enable the USART Data Register not empty Interrupt */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_RXNE);
+
+    /* Enable the USART Parity Error Interrupt */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_PE);
+
+    /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_ERR);
+
+    /* Enable the USART Transmit Data Register Empty Interrupt */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_TXE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Simplex Send an amount of data in non-blocking mode.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @param  pTxData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
+{
+  uint32_t *tmp;
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pTxData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->pTxBuffPtr = pTxData;
+    husart->TxXferSize = Size;
+    husart->TxXferCount = Size;
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_TX;
+
+    /* Set the USART DMA transfer complete callback */
+    husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
+
+    /* Set the USART DMA Half transfer complete callback */
+    husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
+
+    /* Set the DMA error callback */
+    husart->hdmatx->XferErrorCallback = USART_DMAError;
+
+    /* Enable the USART transmit DMA Stream */
+    tmp = (uint32_t*)&pTxData;
+    HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size);
+
+    /* Clear the TC flag in the SR register by writing 0 to it */
+    __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC);
+
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the USART CR3 register */
+    husart->Instance->CR3 |= USART_CR3_DMAT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Full-Duplex Receive an amount of data in non-blocking mode.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @param  pRxData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @retval HAL status
+  * @note   The USART DMA transmit stream must be configured in order to generate the clock for the slave.
+  * @note   When the USART parity is enabled (PCE = 1) the data received contain the parity bit.
+  */
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
+{
+  uint32_t *tmp;
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pRxData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->pRxBuffPtr = pRxData;
+    husart->RxXferSize = Size;
+    husart->pTxBuffPtr = pRxData;
+    husart->TxXferSize = Size;
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_RX;
+
+    /* Set the USART DMA Rx transfer complete callback */
+    husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
+
+    /* Set the USART DMA Half transfer complete callback */
+    husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
+
+    /* Set the USART DMA Rx transfer error callback */
+    husart->hdmarx->XferErrorCallback = USART_DMAError;
+
+    /* Enable the USART receive DMA Stream */
+    tmp = (uint32_t*)&pRxData;
+    HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t*)tmp, Size);
+
+    /* Enable the USART transmit DMA Stream: the transmit stream is used in order
+       to generate in the non-blocking mode the clock to the slave device,
+       this mode isn't a simplex receive mode but a full-duplex receive one */
+    HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size);
+
+    /* Clear the Overrun flag just before enabling the DMA Rx request: mandatory for the second transfer
+       when using the USART in circular mode */
+    __HAL_USART_CLEAR_OREFLAG(husart);
+
+    /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+       in the USART CR3 register */
+    husart->Instance->CR3 |= USART_CR3_DMAR;
+
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the USART CR3 register */
+    husart->Instance->CR3 |= USART_CR3_DMAT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Full-Duplex Transmit Receive an amount of data in non-blocking mode.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @param  pTxData: Pointer to data transmitted buffer
+  * @param  pRxData: Pointer to data received buffer
+  * @param  Size: Amount of data to be received
+  * @note   When the USART parity is enabled (PCE = 1) the data received contain the parity bit.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+  uint32_t *tmp;
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->pRxBuffPtr = pRxData;
+    husart->RxXferSize = Size;
+    husart->pTxBuffPtr = pTxData;
+    husart->TxXferSize = Size;
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_TX_RX;
+
+    /* Set the USART DMA Rx transfer complete callback */
+    husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
+
+    /* Set the USART DMA Half transfer complete callback */
+    husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
+
+    /* Set the USART DMA Tx transfer complete callback */
+    husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
+
+    /* Set the USART DMA Half transfer complete callback */
+    husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
+
+    /* Set the USART DMA Tx transfer error callback */
+    husart->hdmatx->XferErrorCallback = USART_DMAError;
+
+    /* Set the USART DMA Rx transfer error callback */
+    husart->hdmarx->XferErrorCallback = USART_DMAError;
+
+    /* Enable the USART receive DMA Stream */
+    tmp = (uint32_t*)&pRxData;
+    HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t*)tmp, Size);
+
+    /* Enable the USART transmit DMA Stream */
+    tmp = (uint32_t*)&pTxData;
+    HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size);
+
+    /* Clear the TC flag in the SR register by writing 0 to it */
+    __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC);
+
+    /* Clear the Overrun flag: mandatory for the second transfer in circular mode */
+    __HAL_USART_CLEAR_OREFLAG(husart);
+
+    /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+       in the USART CR3 register */
+    husart->Instance->CR3 |= USART_CR3_DMAR;
+
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the USART CR3 register */
+    husart->Instance->CR3 |= USART_CR3_DMAT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Pauses the DMA Transfer.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart)
+{
+  /* Process Locked */
+  __HAL_LOCK(husart);
+
+  /* Disable the USART DMA Tx request */
+  husart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(husart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the DMA Transfer.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart)
+{
+  /* Process Locked */
+  __HAL_LOCK(husart);
+
+  /* Enable the USART DMA Tx request */
+  husart->Instance->CR3 |= USART_CR3_DMAT;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(husart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Stops the DMA Transfer.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart)
+{
+  /* The Lock is not implemented on this API to allow the user application
+     to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback():
+     when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+     and the correspond call back is executed HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback()
+     */
+
+  /* Abort the USART DMA Tx Stream */
+  if(husart->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(husart->hdmatx);
+  }
+  /* Abort the USART DMA Rx Stream */
+  if(husart->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(husart->hdmarx);
+  }
+
+  /* Disable the USART Tx/Rx DMA requests */
+  husart->Instance->CR3 &= ~USART_CR3_DMAT;
+  husart->Instance->CR3 &= ~USART_CR3_DMAR;
+
+  husart->State = HAL_USART_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles USART interrupt request.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval None
+  */
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_PE);
+  tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_PE);
+  /* USART parity error interrupt occurred -----------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    __HAL_USART_CLEAR_PEFLAG(husart);
+    husart->ErrorCode |= HAL_USART_ERROR_PE;
+  }
+
+  tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_FE);
+  tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR);
+  /* USART frame error interrupt occurred ------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    __HAL_USART_CLEAR_FEFLAG(husart);
+    husart->ErrorCode |= HAL_USART_ERROR_FE;
+  }
+
+  tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_NE);
+  tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR);
+  /* USART noise error interrupt occurred ------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    __HAL_USART_CLEAR_NEFLAG(husart);
+    husart->ErrorCode |= HAL_USART_ERROR_NE;
+  }
+
+  tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_ORE);
+  tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR);
+  /* USART Over-Run interrupt occurred ---------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    __HAL_USART_CLEAR_OREFLAG(husart);
+    husart->ErrorCode |= HAL_USART_ERROR_ORE;
+  }
+
+  if(husart->ErrorCode != HAL_USART_ERROR_NONE)
+  {
+    /* Set the USART state ready to be able to start again the process */
+    husart->State = HAL_USART_STATE_READY;
+
+    HAL_USART_ErrorCallback(husart);
+  }
+
+  tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE);
+  tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_RXNE);
+  /* USART in mode Receiver --------------------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    if(husart->State == HAL_USART_STATE_BUSY_RX)
+    {
+      USART_Receive_IT(husart);
+    }
+    else
+    {
+      USART_TransmitReceive_IT(husart);
+    }
+  }
+
+  tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_TXE);
+  tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_TXE);
+  /* USART in mode Transmitter -----------------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    if(husart->State == HAL_USART_STATE_BUSY_TX)
+    {
+      USART_Transmit_IT(husart);
+    }
+    else
+    {
+      USART_TransmitReceive_IT(husart);
+    }
+  }
+
+  tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_TC);
+  tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_TC);
+  /* USART in mode Transmitter (transmission end) ----------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    USART_EndTransmit_IT(husart);
+  }
+}
+
+/**
+  * @brief  Tx Transfer completed callbacks.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval None
+  */
+ __weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_USART_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tx Half Transfer completed callbacks.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval None
+  */
+ __weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_USART_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Transfer completed callbacks.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval None
+  */
+__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_USART_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Half Transfer completed callbacks.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval None
+  */
+__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_USART_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tx/Rx Transfers completed callback for the non-blocking process.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval None
+  */
+__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_USART_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  USART error callbacks.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval None
+  */
+ __weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_USART_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup USART_Exported_Functions_Group3 Peripheral State and Errors functions
+  *  @brief   USART State and Errors functions
+  *
+ at verbatim
+  ==============================================================================
+                  ##### Peripheral State and Errors functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to return the State of
+    USART communication
+    process, return Peripheral Errors occurred during communication process
+     (+) HAL_USART_GetState() API can be helpful to check in run-time the state
+         of the USART peripheral.
+     (+) HAL_USART_GetError() check in run-time errors that could be occurred during
+         communication.
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the USART state.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval HAL state
+  */
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart)
+{
+  return husart->State;
+}
+
+/**
+  * @brief  Return the USART error code
+  * @param  husart : pointer to a USART_HandleTypeDef structure that contains
+  *              the configuration information for the specified USART.
+  * @retval USART Error Code
+  */
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart)
+{
+  return husart->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @brief  DMA USART transmit process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  /* DMA Normal mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    husart->TxXferCount = 0;
+    if(husart->State == HAL_USART_STATE_BUSY_TX)
+    {
+      /* Disable the DMA transfer for transmit request by resetting the DMAT bit
+         in the USART CR3 register */
+      CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
+
+      /* Enable the USART Transmit Complete Interrupt */
+      __HAL_USART_ENABLE_IT(husart, USART_IT_TC);
+    }
+  }
+  /* DMA Circular mode */
+  else
+  {
+    if(husart->State == HAL_USART_STATE_BUSY_TX)
+    {
+      HAL_USART_TxCpltCallback(husart);
+    }
+  }
+}
+
+/**
+  * @brief DMA USART transmit process half complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_USART_TxHalfCpltCallback(husart);
+}
+
+/**
+  * @brief  DMA USART receive process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  /* DMA Normal mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    husart->RxXferCount = 0;
+    if(husart->State == HAL_USART_STATE_BUSY_RX)
+    {
+      /* Disable the DMA transfer for the Transmit/receiver requests by setting the DMAT/DMAR bit
+         in the USART CR3 register */
+      husart->Instance->CR3 &= ~(USART_CR3_DMAR);
+
+      husart->State= HAL_USART_STATE_READY;
+      HAL_USART_RxCpltCallback(husart);
+    }
+    /* The USART state is HAL_USART_STATE_BUSY_TX_RX */
+    else
+    {
+      /* Disable the DMA transfer for the Transmit/receiver requests by setting the DMAT/DMAR bit
+         in the USART CR3 register */
+      husart->Instance->CR3 &= ~(USART_CR3_DMAR);
+      husart->Instance->CR3 &= ~(USART_CR3_DMAT);
+
+      husart->State= HAL_USART_STATE_READY;
+      HAL_USART_TxRxCpltCallback(husart);
+    }
+  }
+  /* DMA circular mode */
+  else
+  {
+    if(husart->State == HAL_USART_STATE_BUSY_RX)
+    {
+      HAL_USART_RxCpltCallback(husart);
+    }
+    /* The USART state is HAL_USART_STATE_BUSY_TX_RX */
+    else
+    {
+      HAL_USART_TxRxCpltCallback(husart);
+    }
+  }
+}
+
+/**
+  * @brief DMA USART receive process half complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_USART_RxHalfCpltCallback(husart);
+}
+
+/**
+  * @brief  DMA USART communication error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void USART_DMAError(DMA_HandleTypeDef *hdma)
+{
+  USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  husart->RxXferCount = 0;
+  husart->TxXferCount = 0;
+  husart->ErrorCode |= HAL_USART_ERROR_DMA;
+  husart->State= HAL_USART_STATE_READY;
+
+  HAL_USART_ErrorCallback(husart);
+}
+
+/**
+  * @brief  This function handles USART Communication Timeout.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @param  Flag: specifies the USART flag to check.
+  * @param  Status: The new Flag status (SET or RESET).
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_USART_GET_FLAG(husart, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
+          __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
+          __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
+          __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+          husart->State= HAL_USART_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(husart);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_USART_GET_FLAG(husart, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
+          __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
+          __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
+          __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+          husart->State= HAL_USART_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(husart);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Simplex Send an amount of data in non-blocking mode.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval HAL status
+  * @note   The USART errors are not managed to avoid the overrun error.
+  */
+static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart)
+{
+  uint16_t* tmp;
+
+  if(husart->State == HAL_USART_STATE_BUSY_TX)
+  {
+    if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+    {
+      tmp = (uint16_t*) husart->pTxBuffPtr;
+      husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
+      if(husart->Init.Parity == USART_PARITY_NONE)
+      {
+        husart->pTxBuffPtr += 2;
+      }
+      else
+      {
+        husart->pTxBuffPtr += 1;
+      }
+    }
+    else
+    {
+      husart->Instance->DR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FF);
+    }
+
+    if(--husart->TxXferCount == 0)
+    {
+      /* Disable the USART Transmit data register empty Interrupt */
+      __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
+
+      /* Enable the USART Transmit Complete Interrupt */
+      __HAL_USART_ENABLE_IT(husart, USART_IT_TC);
+    }
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Wraps up transmission in non blocking mode.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart)
+{
+  /* Disable the USART Transmit Complete Interrupt */
+  __HAL_USART_DISABLE_IT(husart, USART_IT_TC);
+
+  /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+  __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+  husart->State = HAL_USART_STATE_READY;
+
+  HAL_USART_TxCpltCallback(husart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Simplex Receive an amount of data in non-blocking mode.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart)
+{
+  uint16_t* tmp;
+  if(husart->State == HAL_USART_STATE_BUSY_RX)
+  {
+    if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+    {
+      tmp = (uint16_t*) husart->pRxBuffPtr;
+      if(husart->Init.Parity == USART_PARITY_NONE)
+      {
+        *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
+        husart->pRxBuffPtr += 2;
+      }
+      else
+      {
+        *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF);
+        husart->pRxBuffPtr += 1;
+      }
+      if(--husart->RxXferCount != 0x00)
+      {
+        /* Send dummy byte in order to generate the clock for the slave to send the next data */
+        husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FF);
+      }
+    }
+    else
+    {
+      if(husart->Init.Parity == USART_PARITY_NONE)
+      {
+        *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
+      }
+      else
+      {
+        *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
+      }
+
+      if(--husart->RxXferCount != 0x00)
+      {
+        /* Send dummy byte in order to generate the clock for the slave to send the next data */
+        husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x00FF);
+      }
+    }
+
+    if(husart->RxXferCount == 0)
+    {
+      /* Disable the USART RXNE Interrupt */
+      __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
+
+      /* Disable the USART Parity Error Interrupt */
+      __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
+
+      /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+      __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+      husart->State = HAL_USART_STATE_READY;
+      HAL_USART_RxCpltCallback(husart);
+
+      return HAL_OK;
+    }
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking).
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart)
+{
+  uint16_t* tmp;
+
+  if(husart->State == HAL_USART_STATE_BUSY_TX_RX)
+  {
+    if(husart->TxXferCount != 0x00)
+    {
+      if(__HAL_USART_GET_FLAG(husart, USART_FLAG_TXE) != RESET)
+      {
+        if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+        {
+          tmp = (uint16_t*) husart->pTxBuffPtr;
+          husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
+          if(husart->Init.Parity == USART_PARITY_NONE)
+          {
+            husart->pTxBuffPtr += 2;
+          }
+          else
+          {
+            husart->pTxBuffPtr += 1;
+          }
+        }
+        else
+        {
+          husart->Instance->DR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FF);
+        }
+        husart->TxXferCount--;
+
+        /* Check the latest data transmitted */
+        if(husart->TxXferCount == 0)
+        {
+           __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
+        }
+      }
+    }
+
+    if(husart->RxXferCount != 0x00)
+    {
+      if(__HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE) != RESET)
+      {
+        if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+        {
+          tmp = (uint16_t*) husart->pRxBuffPtr;
+          if(husart->Init.Parity == USART_PARITY_NONE)
+          {
+            *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
+            husart->pRxBuffPtr += 2;
+          }
+          else
+          {
+            *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF);
+            husart->pRxBuffPtr += 1;
+          }
+        }
+        else
+        {
+          if(husart->Init.Parity == USART_PARITY_NONE)
+          {
+            *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
+          }
+          else
+          {
+            *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
+          }
+        }
+        husart->RxXferCount--;
+      }
+    }
+
+    /* Check the latest data received */
+    if(husart->RxXferCount == 0)
+    {
+      __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
+
+      /* Disable the USART Parity Error Interrupt */
+      __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
+
+      /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+      __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+      husart->State = HAL_USART_STATE_READY;
+
+      HAL_USART_TxRxCpltCallback(husart);
+
+      return HAL_OK;
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Configures the USART peripheral.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval None
+  */
+static void USART_SetConfig(USART_HandleTypeDef *husart)
+{
+  uint32_t tmpreg = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_USART_INSTANCE(husart->Instance));
+  assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity));
+  assert_param(IS_USART_PHASE(husart->Init.CLKPhase));
+  assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit));
+  assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate));
+  assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength));
+  assert_param(IS_USART_STOPBITS(husart->Init.StopBits));
+  assert_param(IS_USART_PARITY(husart->Init.Parity));
+  assert_param(IS_USART_MODE(husart->Init.Mode));
+
+  /* The LBCL, CPOL and CPHA bits have to be selected when both the transmitter and the
+     receiver are disabled (TE=RE=0) to ensure that the clock pulses function correctly. */
+  husart->Instance->CR1 &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
+
+  /*---------------------------- USART CR2 Configuration ---------------------*/
+  tmpreg = husart->Instance->CR2;
+  /* Clear CLKEN, CPOL, CPHA and LBCL bits */
+  tmpreg &= (uint32_t)~((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | USART_CR2_LBCL | USART_CR2_STOP));
+  /* Configure the USART Clock, CPOL, CPHA and LastBit -----------------------*/
+  /* Set CPOL bit according to husart->Init.CLKPolarity value */
+  /* Set CPHA bit according to husart->Init.CLKPhase value */
+  /* Set LBCL bit according to husart->Init.CLKLastBit value */
+  /* Set Stop Bits: Set STOP[13:12] bits according to husart->Init.StopBits value */
+  tmpreg |= (uint32_t)(USART_CLOCK_ENABLE| husart->Init.CLKPolarity |
+                      husart->Init.CLKPhase| husart->Init.CLKLastBit | husart->Init.StopBits);
+  /* Write to USART CR2 */
+  husart->Instance->CR2 = (uint32_t)tmpreg;
+
+  /*-------------------------- USART CR1 Configuration -----------------------*/
+  tmpreg = husart->Instance->CR1;
+
+  /* Clear M, PCE, PS, TE, RE and OVER8 bits */
+  tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
+                                   USART_CR1_RE | USART_CR1_OVER8));
+
+  /* Configure the USART Word Length, Parity and mode:
+     Set the M bits according to husart->Init.WordLength value
+     Set PCE and PS bits according to husart->Init.Parity value
+     Set TE and RE bits according to husart->Init.Mode value
+     Force OVER8 bit to 1 in order to reach the max USART frequencies */
+  tmpreg |= (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8;
+
+  /* Write to USART CR1 */
+  husart->Instance->CR1 = (uint32_t)tmpreg;
+
+  /*-------------------------- USART CR3 Configuration -----------------------*/
+  /* Clear CTSE and RTSE bits */
+  husart->Instance->CR3 &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));
+
+  /*-------------------------- USART BRR Configuration -----------------------*/
+  if((husart->Instance == USART1) || (husart->Instance == USART6))
+  {
+    husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK2Freq(), husart->Init.BaudRate);
+  }
+  else
+  {
+    husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK1Freq(), husart->Init.BaudRate);
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_USART_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c
new file mode 100644
index 0000000..18b8d3f
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c
@@ -0,0 +1,454 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_wwdg.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   WWDG HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Window Watchdog (WWDG) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State functions
+  @verbatim
+  ==============================================================================
+                      ##### WWDG specific features #####
+  ==============================================================================
+  [..]
+    Once enabled the WWDG generates a system reset on expiry of a programmed
+    time period, unless the program refreshes the counter (downcounter)
+    before reaching 0x3F value (i.e. a reset is generated when the counter
+    value rolls over from 0x40 to 0x3F).
+
+    (+) An MCU reset is also generated if the counter value is refreshed
+        before the counter has reached the refresh window value. This
+        implies that the counter must be refreshed in a limited window.
+    (+) Once enabled the WWDG cannot be disabled except by a system reset.
+    (+) WWDGRST flag in RCC_CSR register can be used to inform when a WWDG
+        reset occurs.
+    (+) The WWDG counter input clock is derived from the APB clock divided
+        by a programmable prescaler.
+    (+) WWDG clock (Hz) = PCLK1 / (4096 * Prescaler)
+    (+) WWDG timeout (mS) = 1000 * Counter / WWDG clock
+    (+) WWDG Counter refresh is allowed between the following limits :
+        (++) min time (mS) = 1000 * (Counter � Window) / WWDG clock
+        (++) max time (mS) = 1000 * (Counter � 0x40) / WWDG clock
+
+    (+) Min-max timeout value at 50 MHz(PCLK1): 81.9 us / 41.9 ms
+
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE().
+    (+) Set the WWDG prescaler, refresh window and counter value
+        using HAL_WWDG_Init() function.
+    (+) Start the WWDG using HAL_WWDG_Start() function.
+        When the WWDG is enabled the counter value should be configured to
+        a value greater than 0x40 to prevent generating an immediate reset.
+    (+) Optionally you can enable the Early Wakeup Interrupt (EWI) which is
+        generated when the counter reaches 0x40, and then start the WWDG using
+        HAL_WWDG_Start_IT(). At EWI HAL_WWDG_WakeupCallback is executed and user can
+        add his own code by customization of function pointer HAL_WWDG_WakeupCallback
+        Once enabled, EWI interrupt cannot be disabled except by a system reset.
+    (+) Then the application program must refresh the WWDG counter at regular
+        intervals during normal operation to prevent an MCU reset, using
+        HAL_WWDG_Refresh() function. This operation must occur only when
+        the counter is lower than the refresh window value already programmed.
+
+     *** WWDG HAL driver macros list ***
+     ==================================
+     [..]
+       Below the list of most used macros in WWDG HAL driver.
+
+      (+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral
+      (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status
+      (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags
+      (+) __HAL_WWDG_ENABLE_IT:  Enables the WWDG early wake-up interrupt
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup WWDG WWDG
+  * @brief WWDG HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Functions WWDG Exported Functions
+  * @{
+  */
+
+/** @defgroup WWDG_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions.
+ *
+ at verbatim
+  ==============================================================================
+          ##### Initialization and de-initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize the WWDG according to the specified parameters
+        in the WWDG_InitTypeDef and create the associated handle
+    (+) DeInitialize the WWDG peripheral
+    (+) Initialize the WWDG MSP
+    (+) DeInitialize the WWDG MSP
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the WWDG according to the specified
+  *         parameters in the WWDG_InitTypeDef and creates the associated handle.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg)
+{
+  /* Check the WWDG handle allocation */
+  if(hwwdg == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
+  assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler));
+  assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window));
+  assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter));
+
+  if(hwwdg->State == HAL_WWDG_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hwwdg->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_WWDG_MspInit(hwwdg);
+  }
+
+  /* Change WWDG peripheral state */
+  hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+  /* Set WWDG Prescaler and Window */
+  MODIFY_REG(hwwdg->Instance->CFR, (WWDG_CFR_WDGTB | WWDG_CFR_W), (hwwdg->Init.Prescaler | hwwdg->Init.Window));
+  /* Set WWDG Counter */
+  MODIFY_REG(hwwdg->Instance->CR, WWDG_CR_T, hwwdg->Init.Counter);
+
+  /* Change WWDG peripheral state */
+  hwwdg->State = HAL_WWDG_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the WWDG peripheral.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg)
+{
+  /* Check the WWDG handle allocation */
+  if(hwwdg == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
+
+  /* Change WWDG peripheral state */
+  hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+  /* DeInit the low level hardware */
+  HAL_WWDG_MspDeInit(hwwdg);
+
+  /* Reset WWDG Control register */
+  hwwdg->Instance->CR  = (uint32_t)0x0000007F;
+
+  /* Reset WWDG Configuration register */
+  hwwdg->Instance->CFR = (uint32_t)0x0000007F;
+
+  /* Reset WWDG Status register */
+  hwwdg->Instance->SR  = 0;
+
+  /* Change WWDG peripheral state */
+  hwwdg->State = HAL_WWDG_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hwwdg);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the WWDG MSP.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval None
+  */
+__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_WWDG_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the WWDG MSP.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval None
+  */
+__weak void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_WWDG_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions
+ *  @brief    IO operation functions
+ *
+ at verbatim
+  ==============================================================================
+                       ##### IO operation functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Start the WWDG.
+    (+) Refresh the WWDG.
+    (+) Handle WWDG interrupt request.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the WWDG.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg)
+{
+  /* Process Locked */
+  __HAL_LOCK(hwwdg);
+
+  /* Change WWDG peripheral state */
+  hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+  /* Enable the peripheral */
+  __HAL_WWDG_ENABLE(hwwdg);
+
+  /* Change WWDG peripheral state */
+  hwwdg->State = HAL_WWDG_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hwwdg);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the WWDG with interrupt enabled.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg)
+{
+  /* Process Locked */
+  __HAL_LOCK(hwwdg);
+
+  /* Change WWDG peripheral state */
+  hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+  /* Enable the Early Wakeup Interrupt */
+  __HAL_WWDG_ENABLE_IT(hwwdg, WWDG_IT_EWI);
+
+  /* Enable the peripheral */
+  __HAL_WWDG_ENABLE(hwwdg);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Refreshes the WWDG.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @param  Counter: value of counter to put in WWDG counter
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter)
+{
+  /* Process Locked */
+  __HAL_LOCK(hwwdg);
+
+  /* Change WWDG peripheral state */
+  hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_WWDG_COUNTER(Counter));
+
+  /* Write to WWDG CR the WWDG Counter value to refresh with */
+  MODIFY_REG(hwwdg->Instance->CR, (uint32_t)WWDG_CR_T, Counter);
+
+  /* Change WWDG peripheral state */
+  hwwdg->State = HAL_WWDG_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hwwdg);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles WWDG interrupt request.
+  * @note   The Early Wakeup Interrupt (EWI) can be used if specific safety operations
+  *         or data logging must be performed before the actual reset is generated.
+  *         The EWI interrupt is enabled using __HAL_WWDG_ENABLE_IT() macro.
+  *         When the downcounter reaches the value 0x40, and EWI interrupt is
+  *         generated and the corresponding Interrupt Service Routine (ISR) can
+  *         be used to trigger specific actions (such as communications or data
+  *         logging), before resetting the device.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval None
+  */
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg)
+{
+  /* Check if Early Wakeup Interrupt is enable */
+  if(__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET)
+  {
+    /* Check if WWDG Early Wakeup Interrupt occurred */
+    if(__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET)
+    {
+      /* Early Wakeup callback */
+      HAL_WWDG_WakeupCallback(hwwdg);
+
+      /* Change WWDG peripheral state */
+      hwwdg->State = HAL_WWDG_STATE_READY;
+
+      /* Clear the WWDG Early Wakeup flag */
+      __HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hwwdg);
+    }
+  }
+}
+
+/**
+  * @brief  Early Wakeup WWDG callback.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval None
+  */
+__weak void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg)
+{
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_WWDG_WakeupCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Exported_Functions_Group3 Peripheral State functions
+ *  @brief    Peripheral State functions.
+ *
+ at verbatim
+  ==============================================================================
+                        ##### Peripheral State functions #####
+  ==============================================================================
+  [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the WWDG state.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval HAL state
+  */
+HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg)
+{
+  return hwwdg->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_WWDG_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c
new file mode 100644
index 0000000..cf0ce2a
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c
@@ -0,0 +1,1733 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_ll_fmc.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   FMC Low Layer HAL module driver.
+  *
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Flexible Memory Controller (FMC) peripheral memories:
+  *           + Initialization/de-initialization functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### FMC peripheral features #####
+  ==============================================================================
+  [..] The Flexible memory controller (FMC) includes three memory controllers:
+       (+) The NOR/PSRAM memory controller
+       (+) The NAND/PC Card memory controller
+       (+) The Synchronous DRAM (SDRAM) controller
+
+  [..] The FMC functional block makes the interface with synchronous and asynchronous static
+       memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are:
+       (+) to translate AHB transactions into the appropriate external device protocol
+       (+) to meet the access time requirements of the external memory devices
+
+  [..] All external memories share the addresses, data and control signals with the controller.
+       Each external device is accessed by means of a unique Chip Select. The FMC performs
+       only one access at a time to an external device.
+       The main features of the FMC controller are the following:
+        (+) Interface with static-memory mapped devices including:
+           (++) Static random access memory (SRAM)
+           (++) Read-only memory (ROM)
+           (++) NOR Flash memory/OneNAND Flash memory
+           (++) PSRAM (4 memory banks)
+           (++) 16-bit PC Card compatible devices
+           (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
+                data
+        (+) Interface with synchronous DRAM (SDRAM) memories
+        (+) Independent Chip Select control for each memory bank
+        (+) Independent configuration for each memory bank
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FMC_LL  FMC Low Layer
+  * @brief FMC driver modules
+  * @{
+  */
+
+#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED) || defined(HAL_SDRAM_MODULE_ENABLED)
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup FMC_LL_Private_Functions
+  * @{
+  */
+
+/** @addtogroup FMC_LL_NORSRAM
+  * @brief  NORSRAM Controller functions
+  *
+  @verbatim
+  ==============================================================================
+                   ##### How to use NORSRAM device driver #####
+  ==============================================================================
+
+  [..]
+    This driver contains a set of APIs to interface with the FMC NORSRAM banks in order
+    to run the NORSRAM external devices.
+
+    (+) FMC NORSRAM bank reset using the function FMC_NORSRAM_DeInit()
+    (+) FMC NORSRAM bank control configuration using the function FMC_NORSRAM_Init()
+    (+) FMC NORSRAM bank timing configuration using the function FMC_NORSRAM_Timing_Init()
+    (+) FMC NORSRAM bank extended timing configuration using the function
+        FMC_NORSRAM_Extended_Timing_Init()
+    (+) FMC NORSRAM bank enable/disable write operation using the functions
+        FMC_NORSRAM_WriteOperation_Enable()/FMC_NORSRAM_WriteOperation_Disable()
+
+
+ at endverbatim
+  * @{
+  */
+
+/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group1
+  * @brief    Initialization and Configuration functions
+  *
+  @verbatim
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the FMC NORSRAM interface
+    (+) De-initialize the FMC NORSRAM interface
+    (+) Configure the FMC clock and associated GPIOs
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initialize the FMC_NORSRAM device according to the specified
+  *         control parameters in the FMC_NORSRAM_InitTypeDef
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Init: Pointer to NORSRAM Initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef* Init)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FMC_NORSRAM_BANK(Init->NSBank));
+  assert_param(IS_FMC_MUX(Init->DataAddressMux));
+  assert_param(IS_FMC_MEMORY(Init->MemoryType));
+  assert_param(IS_FMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
+  assert_param(IS_FMC_BURSTMODE(Init->BurstAccessMode));
+  assert_param(IS_FMC_WAIT_POLARITY(Init->WaitSignalPolarity));
+#if !defined (STM32F446xx)
+  assert_param(IS_FMC_WRAP_MODE(Init->WrapMode));
+#endif /* !defined (STM32F446xx) */
+  assert_param(IS_FMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
+  assert_param(IS_FMC_WRITE_OPERATION(Init->WriteOperation));
+  assert_param(IS_FMC_WAITE_SIGNAL(Init->WaitSignal));
+  assert_param(IS_FMC_EXTENDED_MODE(Init->ExtendedMode));
+  assert_param(IS_FMC_ASYNWAIT(Init->AsynchronousWait));
+  assert_param(IS_FMC_WRITE_BURST(Init->WriteBurst));
+  assert_param(IS_FMC_CONTINOUS_CLOCK(Init->ContinuousClock));
+#if defined (STM32F446xx)
+  assert_param(IS_FMC_WRITE_FIFO(Init->WriteFifo));
+  assert_param(IS_FMC_PAGESIZE(Init->PageSize));
+#endif /* defined (STM32F446xx) */
+
+  /* Get the BTCR register value */
+  tmpr = Device->BTCR[Init->NSBank];
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WRAPMOD, WAITCFG, WREN,
+           WAITEN, EXTMOD, ASYNCWAIT, CBURSTRW and CCLKEN bits */
+  tmpr &= ((uint32_t)~(FMC_BCR1_MBKEN     | FMC_BCR1_MUXEN    | FMC_BCR1_MTYP     | \
+                       FMC_BCR1_MWID      | FMC_BCR1_FACCEN   | FMC_BCR1_BURSTEN  | \
+                       FMC_BCR1_WAITPOL   | FMC_BCR1_WRAPMOD  | FMC_BCR1_WAITCFG  | \
+                       FMC_BCR1_WREN      | FMC_BCR1_WAITEN   | FMC_BCR1_EXTMOD   | \
+                       FMC_BCR1_ASYNCWAIT | FMC_BCR1_CBURSTRW | FMC_BCR1_CCLKEN));
+
+  /* Set NORSRAM device control parameters */
+  tmpr |= (uint32_t)(Init->DataAddressMux       |\
+                    Init->MemoryType           |\
+                    Init->MemoryDataWidth      |\
+                    Init->BurstAccessMode      |\
+                    Init->WaitSignalPolarity   |\
+                    Init->WrapMode             |\
+                    Init->WaitSignalActive     |\
+                    Init->WriteOperation       |\
+                    Init->WaitSignal           |\
+                    Init->ExtendedMode         |\
+                    Init->AsynchronousWait     |\
+                    Init->WriteBurst           |\
+                    Init->ContinuousClock);
+#else /* defined(STM32F446xx) */
+  /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, CPSIZE, WAITCFG, WREN,
+           WAITEN, EXTMOD, ASYNCWAIT, CBURSTRW, CCLKEN and WFDIS bits */
+  tmpr &= ((uint32_t)~(FMC_BCR1_MBKEN     | FMC_BCR1_MUXEN    | FMC_BCR1_MTYP     | \
+                       FMC_BCR1_MWID      | FMC_BCR1_FACCEN   | FMC_BCR1_BURSTEN  | \
+                       FMC_BCR1_WAITPOL   | FMC_BCR1_WAITCFG  | FMC_BCR1_CPSIZE   | \
+                       FMC_BCR1_WREN      | FMC_BCR1_WAITEN   | FMC_BCR1_EXTMOD   | \
+                       FMC_BCR1_ASYNCWAIT | FMC_BCR1_CBURSTRW | FMC_BCR1_CCLKEN   | \
+                       FMC_BCR1_WFDIS));
+
+  /* Set NORSRAM device control parameters */
+  tmpr |= (uint32_t)(Init->DataAddressMux       |\
+                    Init->MemoryType           |\
+                    Init->MemoryDataWidth      |\
+                    Init->BurstAccessMode      |\
+                    Init->WaitSignalPolarity   |\
+                    Init->WaitSignalActive     |\
+                    Init->WriteOperation       |\
+                    Init->WaitSignal           |\
+                    Init->ExtendedMode         |\
+                    Init->AsynchronousWait     |\
+                    Init->WriteBurst           |\
+                    Init->ContinuousClock      |\
+                    Init->PageSize             |\
+                    Init->WriteFifo);
+#endif /*  defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+
+  if(Init->MemoryType == FMC_MEMORY_TYPE_NOR)
+  {
+    tmpr |= (uint32_t)FMC_NORSRAM_FLASH_ACCESS_ENABLE;
+  }
+
+  Device->BTCR[Init->NSBank] = tmpr;
+
+  /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */
+  if((Init->ContinuousClock == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FMC_NORSRAM_BANK1))
+  {
+    Init->BurstAccessMode = FMC_BURST_ACCESS_MODE_ENABLE;
+    Device->BTCR[FMC_NORSRAM_BANK1] |= (uint32_t)(Init->BurstAccessMode  |\
+                                                  Init->ContinuousClock);
+  }
+
+#if defined(STM32F446xx)
+  if(Init->NSBank != FMC_NORSRAM_BANK1)
+  {
+    Device->BTCR[FMC_NORSRAM_BANK1] |= (uint32_t)(Init->WriteFifo);
+  }
+#endif /* defined(STM32F446xx) */
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitialize the FMC_NORSRAM peripheral
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  ExDevice: Pointer to NORSRAM extended mode device instance
+  * @param  Bank: NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
+  assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+  /* Disable the FMC_NORSRAM device */
+  __FMC_NORSRAM_DISABLE(Device, Bank);
+
+  /* De-initialize the FMC_NORSRAM device */
+  /* FMC_NORSRAM_BANK1 */
+  if(Bank == FMC_NORSRAM_BANK1)
+  {
+    Device->BTCR[Bank] = 0x000030DB;
+  }
+  /* FMC_NORSRAM_BANK2, FMC_NORSRAM_BANK3 or FMC_NORSRAM_BANK4 */
+  else
+  {
+    Device->BTCR[Bank] = 0x000030D2;
+  }
+
+  Device->BTCR[Bank + 1] = 0x0FFFFFFF;
+  ExDevice->BWTR[Bank]   = 0x0FFFFFFF;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the FMC_NORSRAM Timing according to the specified
+  *         parameters in the FMC_NORSRAM_TimingTypeDef
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Timing: Pointer to NORSRAM Timing structure
+  * @param  Bank: NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+  assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+  assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime));
+  assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+  assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision));
+  assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency));
+  assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
+  assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+  /* Get the BTCR register value */
+  tmpr = Device->BTCR[Bank + 1];
+
+  /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
+  tmpr &= ((uint32_t)~(FMC_BTR1_ADDSET  | FMC_BTR1_ADDHLD | FMC_BTR1_DATAST | \
+                       FMC_BTR1_BUSTURN | FMC_BTR1_CLKDIV | FMC_BTR1_DATLAT | \
+                       FMC_BTR1_ACCMOD));
+
+  /* Set FMC_NORSRAM device timing parameters */
+  tmpr |= (uint32_t)(Timing->AddressSetupTime                 |\
+                    ((Timing->AddressHoldTime) << 4)          |\
+                    ((Timing->DataSetupTime) << 8)            |\
+                    ((Timing->BusTurnAroundDuration) << 16)   |\
+                    (((Timing->CLKDivision)-1) << 20)         |\
+                    (((Timing->DataLatency)-2) << 24)         |\
+                    (Timing->AccessMode));
+
+  Device->BTCR[Bank + 1] = tmpr;
+
+  /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */
+  if(HAL_IS_BIT_SET(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN))
+  {
+    tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1] & ~(((uint32_t)0x0F) << 20));
+    tmpr |= (uint32_t)(((Timing->CLKDivision)-1) << 20);
+    Device->BTCR[FMC_NORSRAM_BANK1 + 1] = tmpr;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the FMC_NORSRAM Extended mode Timing according to the specified
+  *         parameters in the FMC_NORSRAM_TimingTypeDef
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Timing: Pointer to NORSRAM Timing structure
+  * @param  Bank: NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_EXTENDED_MODE(ExtendedMode));
+
+  /* Set NORSRAM device timing register for write configuration, if extended mode is used */
+  if(ExtendedMode == FMC_EXTENDED_MODE_ENABLE)
+  {
+    /* Check the parameters */
+    assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(Device));
+    assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+    assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+    assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime));
+    assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+#if !defined(STM32F446xx)
+    assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision));
+    assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency));
+#endif /* !defined(STM32F446xx) */
+    assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
+    assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+    /* Get the BWTR register value */
+    tmpr = Device->BWTR[Bank];
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+    /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
+    tmpr &= ((uint32_t)~(FMC_BWTR1_ADDSET  | FMC_BWTR1_ADDHLD | FMC_BWTR1_DATAST | \
+                         FMC_BWTR1_BUSTURN | FMC_BWTR1_CLKDIV | FMC_BWTR1_DATLAT | \
+                         FMC_BWTR1_ACCMOD));
+
+    tmpr |= (uint32_t)(Timing->AddressSetupTime                 |\
+                      ((Timing->AddressHoldTime) << 4)          |\
+                      ((Timing->DataSetupTime) << 8)            |\
+                      ((Timing->BusTurnAroundDuration) << 16)   |\
+                      (((Timing->CLKDivision)-1) << 20)         |\
+                      (((Timing->DataLatency)-2) << 24)         |\
+                      (Timing->AccessMode));
+#else /* defined(STM32F446xx) */
+    /* Clear ADDSET, ADDHLD, DATAST, BUSTURN and ACCMOD bits */
+    tmpr &= ((uint32_t)~(FMC_BWTR1_ADDSET  | FMC_BWTR1_ADDHLD | FMC_BWTR1_DATAST | \
+                         FMC_BWTR1_BUSTURN | FMC_BWTR1_ACCMOD));
+
+    tmpr |= (uint32_t)(Timing->AddressSetupTime                 |\
+                      ((Timing->AddressHoldTime) << 4)          |\
+                      ((Timing->DataSetupTime) << 8)            |\
+                      ((Timing->BusTurnAroundDuration) << 16)   |\
+                      (Timing->AccessMode));
+#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+
+    Device->BWTR[Bank] = tmpr;
+  }
+  else
+  {
+    Device->BWTR[Bank] = 0x0FFFFFFF;
+  }
+
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group2
+ *  @brief   management functions
+ *
+ at verbatim
+  ==============================================================================
+                      ##### FMC_NORSRAM Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the FMC NORSRAM interface.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Enables dynamically FMC_NORSRAM write operation.
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Bank: NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+  /* Enable write operation */
+  Device->BTCR[Bank] |= FMC_WRITE_OPERATION_ENABLE;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically FMC_NORSRAM write operation.
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Bank: NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FMC_NORSRAM_BANK(Bank));
+
+  /* Disable write operation */
+  Device->BTCR[Bank] &= ~FMC_WRITE_OPERATION_ENABLE;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup FMC_LL_NAND
+  * @brief    NAND Controller functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use NAND device driver #####
+  ==============================================================================
+  [..]
+    This driver contains a set of APIs to interface with the FMC NAND banks in order
+    to run the NAND external devices.
+
+    (+) FMC NAND bank reset using the function FMC_NAND_DeInit()
+    (+) FMC NAND bank control configuration using the function FMC_NAND_Init()
+    (+) FMC NAND bank common space timing configuration using the function
+        FMC_NAND_CommonSpace_Timing_Init()
+    (+) FMC NAND bank attribute space timing configuration using the function
+        FMC_NAND_AttributeSpace_Timing_Init()
+    (+) FMC NAND bank enable/disable ECC correction feature using the functions
+        FMC_NAND_ECC_Enable()/FMC_NAND_ECC_Disable()
+    (+) FMC NAND bank get ECC correction code using the function FMC_NAND_GetECC()
+
+ at endverbatim
+  * @{
+  */
+
+#if defined(STM32F446xx)
+/** @defgroup HAL_FMC_NAND_Group1 Initialization/de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the FMC NAND interface
+    (+) De-initialize the FMC NAND interface
+    (+) Configure the FMC clock and associated GPIOs
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the FMC_NAND device according to the specified
+  *         control parameters in the FMC_NAND_HandleTypeDef
+  * @param  Device: Pointer to NAND device instance
+  * @param  Init: Pointer to NAND Initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init)
+{
+  uint32_t tmpr  = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_NAND_BANK(Init->NandBank));
+  assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
+  assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
+  assert_param(IS_FMC_ECC_STATE(Init->EccComputation));
+  assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize));
+  assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
+  assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
+
+  /* Get the NAND bank register value */
+  tmpr = Device->PCR;
+
+  /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
+  tmpr &= ((uint32_t)~(FMC_PCR_PWAITEN  | FMC_PCR_PBKEN | FMC_PCR_PTYP | \
+                       FMC_PCR_PWID | FMC_PCR_ECCEN | FMC_PCR_TCLR | \
+                       FMC_PCR_TAR | FMC_PCR_ECCPS));
+
+  /* Set NAND device control parameters */
+  tmpr |= (uint32_t)(Init->Waitfeature                |\
+                     FMC_PCR_MEMORY_TYPE_NAND         |\
+                     Init->MemoryDataWidth            |\
+                     Init->EccComputation             |\
+                     Init->ECCPageSize                |\
+                     ((Init->TCLRSetupTime) << 9)     |\
+                     ((Init->TARSetupTime) << 13));
+
+  /* NAND bank registers configuration */
+  Device->PCR  = tmpr;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FMC_NAND Common space Timing according to the specified
+  *         parameters in the FMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to NAND device instance
+  * @param  Timing: Pointer to NAND timing structure
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  /* Get the NAND bank 2 register value */
+  tmpr = Device->PMEM;
+
+
+  /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+  tmpr &= ((uint32_t)~(FMC_PMEM_MEMSET2  | FMC_PMEM_MEMWAIT2 | FMC_PMEM_MEMHOLD2 | \
+                       FMC_PMEM_MEMHIZ2));
+
+  /* Set FMC_NAND device timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                  |\
+                       ((Timing->WaitSetupTime) << 8)     |\
+                       ((Timing->HoldSetupTime) << 16)    |\
+                       ((Timing->HiZSetupTime) << 24)
+                       );
+
+  /* NAND bank  registers configuration */
+  Device->PMEM = tmpr;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FMC_NAND Attribute space Timing according to the specified
+  *         parameters in the FMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to NAND device instance
+  * @param  Timing: Pointer to NAND timing structure
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  /* Get the NAND bank  register value */
+  tmpr = Device->PATT;
+
+  /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+  tmpr &= ((uint32_t)~(FMC_PATT_ATTSET2  | FMC_PATT_ATTWAIT2 | FMC_PATT_ATTHOLD2 | \
+                       FMC_PATT_ATTHIZ2));
+
+  /* Set FMC_NAND device timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                  |\
+                   ((Timing->WaitSetupTime) << 8)     |\
+                   ((Timing->HoldSetupTime) << 16)    |\
+                   ((Timing->HiZSetupTime) << 24));
+
+  /* NAND bank registers configuration */
+  Device->PATT = tmpr;
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  DeInitializes the FMC_NAND device
+  * @param  Device: Pointer to NAND device instance
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  /* Disable the NAND Bank */
+  __FMC_NAND_DISABLE(Device, Bank);
+
+  /* De-initialize the NAND Bank */
+  /* Set the FMC_NAND_BANK registers to their reset values */
+  Device->PCR  = 0x00000018;
+  Device->SR   = 0x00000040;
+  Device->PMEM = 0xFCFCFCFC;
+  Device->PATT = 0xFCFCFCFC;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_FMC_NAND_Group2 Control functions
+ *  @brief   management functions
+ *
+ at verbatim
+  ==============================================================================
+                       ##### FMC_NAND Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the FMC NAND interface.
+
+ at endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Enables dynamically FMC_NAND ECC feature.
+  * @param  Device: Pointer to NAND device instance
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  /* Enable ECC feature */
+  Device->PCR |= FMC_PCR_ECCEN;
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Disables dynamically FMC_NAND ECC feature.
+  * @param  Device: Pointer to NAND device instance
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  /* Disable ECC feature */
+  Device->PCR &= ~FMC_PCR_ECCEN;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically FMC_NAND ECC feature.
+  * @param  Device: Pointer to NAND device instance
+  * @param  ECCval: Pointer to ECC value
+  * @param  Bank: NAND bank number
+  * @param  Timeout: Timeout wait value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until FIFO is empty */
+  while(__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Get the ECCR register value */
+  *ECCval = (uint32_t)Device->ECCR;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+/** @defgroup HAL_FMC_NAND_Group1 Initialization/de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the FMC NAND interface
+    (+) De-initialize the FMC NAND interface
+    (+) Configure the FMC clock and associated GPIOs
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the FMC_NAND device according to the specified
+  *         control parameters in the FMC_NAND_HandleTypeDef
+  * @param  Device: Pointer to NAND device instance
+  * @param  Init: Pointer to NAND Initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init)
+{
+  uint32_t tmpr  = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_NAND_BANK(Init->NandBank));
+  assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
+  assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
+  assert_param(IS_FMC_ECC_STATE(Init->EccComputation));
+  assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize));
+  assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
+  assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
+
+  if(Init->NandBank == FMC_NAND_BANK2)
+  {
+    /* Get the NAND bank 2 register value */
+    tmpr = Device->PCR2;
+  }
+  else
+  {
+    /* Get the NAND bank 3 register value */
+    tmpr = Device->PCR3;
+  }
+
+  /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
+  tmpr &= ((uint32_t)~(FMC_PCR2_PWAITEN  | FMC_PCR2_PBKEN | FMC_PCR2_PTYP | \
+                       FMC_PCR2_PWID | FMC_PCR2_ECCEN | FMC_PCR2_TCLR | \
+                       FMC_PCR2_TAR | FMC_PCR2_ECCPS));
+
+  /* Set NAND device control parameters */
+  tmpr |= (uint32_t)(Init->Waitfeature                |\
+                     FMC_PCR_MEMORY_TYPE_NAND         |\
+                     Init->MemoryDataWidth            |\
+                     Init->EccComputation             |\
+                     Init->ECCPageSize                |\
+                     ((Init->TCLRSetupTime) << 9)     |\
+                     ((Init->TARSetupTime) << 13));
+
+  if(Init->NandBank == FMC_NAND_BANK2)
+  {
+    /* NAND bank 2 registers configuration */
+    Device->PCR2  = tmpr;
+  }
+  else
+  {
+    /* NAND bank 3 registers configuration */
+    Device->PCR3  = tmpr;
+  }
+
+  return HAL_OK;
+
+}
+
+/**
+  * @brief  Initializes the FMC_NAND Common space Timing according to the specified
+  *         parameters in the FMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to NAND device instance
+  * @param  Timing: Pointer to NAND timing structure
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  if(Bank == FMC_NAND_BANK2)
+  {
+    /* Get the NAND bank 2 register value */
+    tmpr = Device->PMEM2;
+  }
+  else
+  {
+    /* Get the NAND bank 3 register value */
+    tmpr = Device->PMEM3;
+  }
+
+  /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+  tmpr &= ((uint32_t)~(FMC_PMEM2_MEMSET2  | FMC_PMEM2_MEMWAIT2 | FMC_PMEM2_MEMHOLD2 | \
+                       FMC_PMEM2_MEMHIZ2));
+
+  /* Set FMC_NAND device timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                  |\
+                       ((Timing->WaitSetupTime) << 8)     |\
+                       ((Timing->HoldSetupTime) << 16)    |\
+                       ((Timing->HiZSetupTime) << 24)
+                       );
+
+  if(Bank == FMC_NAND_BANK2)
+  {
+    /* NAND bank 2 registers configuration */
+    Device->PMEM2 = tmpr;
+  }
+  else
+  {
+    /* NAND bank 3 registers configuration */
+    Device->PMEM3 = tmpr;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FMC_NAND Attribute space Timing according to the specified
+  *         parameters in the FMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to NAND device instance
+  * @param  Timing: Pointer to NAND timing structure
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  if(Bank == FMC_NAND_BANK2)
+  {
+    /* Get the NAND bank 2 register value */
+    tmpr = Device->PATT2;
+  }
+  else
+  {
+    /* Get the NAND bank 3 register value */
+    tmpr = Device->PATT3;
+  }
+
+  /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+  tmpr &= ((uint32_t)~(FMC_PATT2_ATTSET2  | FMC_PATT2_ATTWAIT2 | FMC_PATT2_ATTHOLD2 | \
+                       FMC_PATT2_ATTHIZ2));
+
+  /* Set FMC_NAND device timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                  |\
+                   ((Timing->WaitSetupTime) << 8)     |\
+                   ((Timing->HoldSetupTime) << 16)    |\
+                   ((Timing->HiZSetupTime) << 24));
+
+  if(Bank == FMC_NAND_BANK2)
+  {
+    /* NAND bank 2 registers configuration */
+    Device->PATT2 = tmpr;
+  }
+  else
+  {
+    /* NAND bank 3 registers configuration */
+    Device->PATT3 = tmpr;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the FMC_NAND device
+  * @param  Device: Pointer to NAND device instance
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  /* Disable the NAND Bank */
+  __FMC_NAND_DISABLE(Device, Bank);
+
+  /* De-initialize the NAND Bank */
+  if(Bank == FMC_NAND_BANK2)
+  {
+    /* Set the FMC_NAND_BANK2 registers to their reset values */
+    Device->PCR2  = 0x00000018;
+    Device->SR2   = 0x00000040;
+    Device->PMEM2 = 0xFCFCFCFC;
+    Device->PATT2 = 0xFCFCFCFC;
+  }
+  /* FMC_Bank3_NAND */
+  else
+  {
+    /* Set the FMC_NAND_BANK3 registers to their reset values */
+    Device->PCR3  = 0x00000018;
+    Device->SR3   = 0x00000040;
+    Device->PMEM3 = 0xFCFCFCFC;
+    Device->PATT3 = 0xFCFCFCFC;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup FMC_LL_NAND_Private_Functions_Group2
+  *  @brief   management functions
+  *
+ at verbatim
+  ==============================================================================
+                       ##### FMC_NAND Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the FMC NAND interface.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Enables dynamically FMC_NAND ECC feature.
+  * @param  Device: Pointer to NAND device instance
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  /* Enable ECC feature */
+  if(Bank == FMC_NAND_BANK2)
+  {
+    Device->PCR2 |= FMC_PCR2_ECCEN;
+  }
+  else
+  {
+    Device->PCR3 |= FMC_PCR3_ECCEN;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically FMC_NAND ECC feature.
+  * @param  Device: Pointer to NAND device instance
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  /* Disable ECC feature */
+  if(Bank == FMC_NAND_BANK2)
+  {
+    Device->PCR2 &= ~FMC_PCR2_ECCEN;
+  }
+  else
+  {
+    Device->PCR3 &= ~FMC_PCR3_ECCEN;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically FMC_NAND ECC feature.
+  * @param  Device: Pointer to NAND device instance
+  * @param  ECCval: Pointer to ECC value
+  * @param  Bank: NAND bank number
+  * @param  Timeout: Timeout wait value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until FIFO is empty */
+  while(__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  if(Bank == FMC_NAND_BANK2)
+  {
+    /* Get the ECCR2 register value */
+    *ECCval = (uint32_t)Device->ECCR2;
+  }
+  else
+  {
+    /* Get the ECCR3 register value */
+    *ECCval = (uint32_t)Device->ECCR3;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+#endif /* defined(STM32F446xx) */
+/**
+  * @}
+  */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @addtogroup FMC_LL_PCCARD
+  * @brief    PCCARD Controller functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use PCCARD device driver #####
+  ==============================================================================
+  [..]
+    This driver contains a set of APIs to interface with the FMC PCCARD bank in order
+    to run the PCCARD/compact flash external devices.
+
+    (+) FMC PCCARD bank reset using the function FMC_PCCARD_DeInit()
+    (+) FMC PCCARD bank control configuration using the function FMC_PCCARD_Init()
+    (+) FMC PCCARD bank common space timing configuration using the function
+        FMC_PCCARD_CommonSpace_Timing_Init()
+    (+) FMC PCCARD bank attribute space timing configuration using the function
+        FMC_PCCARD_AttributeSpace_Timing_Init()
+    (+) FMC PCCARD bank IO space timing configuration using the function
+        FMC_PCCARD_IOSpace_Timing_Init()
+ at endverbatim
+  * @{
+  */
+
+/** @addtogroup FMC_LL_PCCARD_Private_Functions_Group1
+  *  @brief    Initialization and Configuration functions
+  *
+ at verbatim
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the FMC PCCARD interface
+    (+) De-initialize the FMC PCCARD interface
+    (+) Configure the FMC clock and associated GPIOs
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the FMC_PCCARD device according to the specified
+  *         control parameters in the FMC_PCCARD_HandleTypeDef
+  * @param  Device: Pointer to PCCARD device instance
+  * @param  Init: Pointer to PCCARD Initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_PCCARD_DEVICE(Device));
+  assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
+  assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
+  assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
+
+  /* Get PCCARD control register value */
+  tmpr = Device->PCR4;
+
+  /* Clear TAR, TCLR, PWAITEN and PWID bits */
+  tmpr &= ((uint32_t)~(FMC_PCR4_TAR  | FMC_PCR4_TCLR | FMC_PCR4_PWAITEN | \
+                       FMC_PCR4_PWID));
+
+  /* Set FMC_PCCARD device control parameters */
+  tmpr |= (uint32_t)(Init->Waitfeature              |\
+                     FMC_NAND_PCC_MEM_BUS_WIDTH_16  |\
+                    (Init->TCLRSetupTime << 9)      |\
+                    (Init->TARSetupTime << 13));
+
+  Device->PCR4 = tmpr;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FMC_PCCARD Common space Timing according to the specified
+  *         parameters in the FMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to PCCARD device instance
+  * @param  Timing: Pointer to PCCARD timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_PCCARD_DEVICE(Device));
+  assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+
+  /* Get PCCARD common space timing register value */
+  tmpr = Device->PMEM4;
+
+  /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+  tmpr &= ((uint32_t)~(FMC_PMEM4_MEMSET4  | FMC_PMEM4_MEMWAIT4 | FMC_PMEM4_MEMHOLD4 | \
+                       FMC_PMEM4_MEMHIZ4));
+  /* Set PCCARD timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                 |\
+                    ((Timing->WaitSetupTime) << 8)     |\
+                    ((Timing->HoldSetupTime) << 16)    |\
+                    ((Timing->HiZSetupTime) << 24));
+
+  Device->PMEM4 = tmpr;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FMC_PCCARD Attribute space Timing according to the specified
+  *         parameters in the FMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to PCCARD device instance
+  * @param  Timing: Pointer to PCCARD timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_PCCARD_DEVICE(Device));
+  assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+
+  /* Get PCCARD timing parameters */
+  tmpr = Device->PATT4;
+
+  /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+  tmpr &= ((uint32_t)~(FMC_PATT4_ATTSET4  | FMC_PATT4_ATTWAIT4 | FMC_PATT4_ATTHOLD4 | \
+                       FMC_PATT4_ATTHIZ4));
+
+  /* Set PCCARD timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                |\
+                   ((Timing->WaitSetupTime) << 8)     |\
+                   ((Timing->HoldSetupTime) << 16)    |\
+                   ((Timing->HiZSetupTime) << 24));
+  Device->PATT4 = tmpr;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FMC_PCCARD IO space Timing according to the specified
+  *         parameters in the FMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to PCCARD device instance
+  * @param  Timing: Pointer to PCCARD timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_PCCARD_DEVICE(Device));
+  assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+
+  /* Get FMC_PCCARD device timing parameters */
+  tmpr = Device->PIO4;
+
+  /* Clear IOSET4, IOWAIT4, IOHOLD4 and IOHIZ4 bits */
+  tmpr &= ((uint32_t)~(FMC_PIO4_IOSET4  | FMC_PIO4_IOWAIT4 | FMC_PIO4_IOHOLD4 | \
+                       FMC_PIO4_IOHIZ4));
+
+  /* Set FMC_PCCARD device timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                  |\
+                     ((Timing->WaitSetupTime) << 8)     |\
+                     ((Timing->HoldSetupTime) << 16)    |\
+                     ((Timing->HiZSetupTime) << 24));
+
+  Device->PIO4 = tmpr;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the FMC_PCCARD device
+  * @param  Device: Pointer to PCCARD device instance
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_PCCARD_DEVICE(Device));
+
+  /* Disable the FMC_PCCARD device */
+  __FMC_PCCARD_DISABLE(Device);
+
+  /* De-initialize the FMC_PCCARD device */
+  Device->PCR4    = 0x00000018;
+  Device->SR4     = 0x00000000;
+  Device->PMEM4   = 0xFCFCFCFC;
+  Device->PATT4   = 0xFCFCFCFC;
+  Device->PIO4    = 0xFCFCFCFC;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+
+/** @addtogroup FMC_LL_SDRAM
+  * @brief    SDRAM Controller functions
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use SDRAM device driver #####
+  ==============================================================================
+  [..]
+    This driver contains a set of APIs to interface with the FMC SDRAM banks in order
+    to run the SDRAM external devices.
+
+    (+) FMC SDRAM bank reset using the function FMC_SDRAM_DeInit()
+    (+) FMC SDRAM bank control configuration using the function FMC_SDRAM_Init()
+    (+) FMC SDRAM bank timing configuration using the function FMC_SDRAM_Timing_Init()
+    (+) FMC SDRAM bank enable/disable write operation using the functions
+        FMC_SDRAM_WriteOperation_Enable()/FMC_SDRAM_WriteOperation_Disable()
+    (+) FMC SDRAM bank send command using the function FMC_SDRAM_SendCommand()
+
+ at endverbatim
+  * @{
+  */
+
+/** @addtogroup FMC_LL_SDRAM_Private_Functions_Group1
+  *  @brief    Initialization and Configuration functions
+  *
+ at verbatim
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the FMC SDRAM interface
+    (+) De-initialize the FMC SDRAM interface
+    (+) Configure the FMC clock and associated GPIOs
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the FMC_SDRAM device according to the specified
+  *         control parameters in the FMC_SDRAM_InitTypeDef
+  * @param  Device: Pointer to SDRAM device instance
+  * @param  Init: Pointer to SDRAM Initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init)
+{
+  uint32_t tmpr1 = 0;
+  uint32_t tmpr2 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_SDRAM_BANK(Init->SDBank));
+  assert_param(IS_FMC_COLUMNBITS_NUMBER(Init->ColumnBitsNumber));
+  assert_param(IS_FMC_ROWBITS_NUMBER(Init->RowBitsNumber));
+  assert_param(IS_FMC_SDMEMORY_WIDTH(Init->MemoryDataWidth));
+  assert_param(IS_FMC_INTERNALBANK_NUMBER(Init->InternalBankNumber));
+  assert_param(IS_FMC_CAS_LATENCY(Init->CASLatency));
+  assert_param(IS_FMC_WRITE_PROTECTION(Init->WriteProtection));
+  assert_param(IS_FMC_SDCLOCK_PERIOD(Init->SDClockPeriod));
+  assert_param(IS_FMC_READ_BURST(Init->ReadBurst));
+  assert_param(IS_FMC_READPIPE_DELAY(Init->ReadPipeDelay));
+
+  /* Set SDRAM bank configuration parameters */
+  if (Init->SDBank != FMC_SDRAM_BANK2)
+  {
+    tmpr1 = Device->SDCR[FMC_SDRAM_BANK1];
+
+    /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
+    tmpr1 &= ((uint32_t)~(FMC_SDCR1_NC  | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
+                         FMC_SDCR1_NB  | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
+                         FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
+
+
+    tmpr1 |= (uint32_t)(Init->ColumnBitsNumber   |\
+                                               Init->RowBitsNumber      |\
+                                               Init->MemoryDataWidth    |\
+                                               Init->InternalBankNumber |\
+                                               Init->CASLatency         |\
+                                               Init->WriteProtection    |\
+                                               Init->SDClockPeriod      |\
+                                               Init->ReadBurst          |\
+                                               Init->ReadPipeDelay
+                                               );
+    Device->SDCR[FMC_SDRAM_BANK1] = tmpr1;
+  }
+  else /* FMC_Bank2_SDRAM */
+  {
+    tmpr1 = Device->SDCR[FMC_SDRAM_BANK1];
+
+    /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
+    tmpr1 &= ((uint32_t)~(FMC_SDCR1_NC  | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
+                          FMC_SDCR1_NB  | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
+                          FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
+
+    tmpr1 |= (uint32_t)(Init->SDClockPeriod      |\
+                        Init->ReadBurst          |\
+                        Init->ReadPipeDelay);
+
+    tmpr2 = Device->SDCR[FMC_SDRAM_BANK2];
+
+    /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
+    tmpr2 &= ((uint32_t)~(FMC_SDCR1_NC  | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
+                          FMC_SDCR1_NB  | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
+                          FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
+
+    tmpr2 |= (uint32_t)(Init->ColumnBitsNumber   |\
+                       Init->RowBitsNumber      |\
+                       Init->MemoryDataWidth    |\
+                       Init->InternalBankNumber |\
+                       Init->CASLatency         |\
+                       Init->WriteProtection);
+
+    Device->SDCR[FMC_SDRAM_BANK1] = tmpr1;
+    Device->SDCR[FMC_SDRAM_BANK2] = tmpr2;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FMC_SDRAM device timing according to the specified
+  *         parameters in the FMC_SDRAM_TimingTypeDef
+  * @param  Device: Pointer to SDRAM device instance
+  * @param  Timing: Pointer to SDRAM Timing structure
+  * @param  Bank: SDRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr1 = 0;
+  uint32_t tmpr2 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_LOADTOACTIVE_DELAY(Timing->LoadToActiveDelay));
+  assert_param(IS_FMC_EXITSELFREFRESH_DELAY(Timing->ExitSelfRefreshDelay));
+  assert_param(IS_FMC_SELFREFRESH_TIME(Timing->SelfRefreshTime));
+  assert_param(IS_FMC_ROWCYCLE_DELAY(Timing->RowCycleDelay));
+  assert_param(IS_FMC_WRITE_RECOVERY_TIME(Timing->WriteRecoveryTime));
+  assert_param(IS_FMC_RP_DELAY(Timing->RPDelay));
+  assert_param(IS_FMC_RCD_DELAY(Timing->RCDDelay));
+  assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+  /* Set SDRAM device timing parameters */
+  if (Bank != FMC_SDRAM_BANK2)
+  {
+    tmpr1 = Device->SDTR[FMC_SDRAM_BANK1];
+
+    /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
+    tmpr1 &= ((uint32_t)~(FMC_SDTR1_TMRD  | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
+                          FMC_SDTR1_TRC  | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
+                          FMC_SDTR1_TRCD));
+
+    tmpr1 |= (uint32_t)(((Timing->LoadToActiveDelay)-1)           |\
+                       (((Timing->ExitSelfRefreshDelay)-1) << 4) |\
+                       (((Timing->SelfRefreshTime)-1) << 8)      |\
+                       (((Timing->RowCycleDelay)-1) << 12)       |\
+                       (((Timing->WriteRecoveryTime)-1) <<16)    |\
+                       (((Timing->RPDelay)-1) << 20)             |\
+                       (((Timing->RCDDelay)-1) << 24));
+    Device->SDTR[FMC_SDRAM_BANK1] = tmpr1;
+  }
+  else /* FMC_Bank2_SDRAM */
+  {
+    tmpr1 = Device->SDTR[FMC_SDRAM_BANK2];
+
+    /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
+    tmpr1 &= ((uint32_t)~(FMC_SDTR1_TMRD  | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
+                          FMC_SDTR1_TRC  | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
+                          FMC_SDTR1_TRCD));
+
+    tmpr1 |= (uint32_t)(((Timing->LoadToActiveDelay)-1)           |\
+                       (((Timing->ExitSelfRefreshDelay)-1) << 4) |\
+                       (((Timing->SelfRefreshTime)-1) << 8)      |\
+                       (((Timing->WriteRecoveryTime)-1) <<16)    |\
+                       (((Timing->RCDDelay)-1) << 24));
+
+    tmpr2 = Device->SDTR[FMC_SDRAM_BANK1];
+
+    /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
+    tmpr2 &= ((uint32_t)~(FMC_SDTR1_TMRD  | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
+                          FMC_SDTR1_TRC  | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
+                          FMC_SDTR1_TRCD));
+    tmpr2 |= (uint32_t)((((Timing->RowCycleDelay)-1) << 12)       |\
+                        (((Timing->RPDelay)-1) << 20));
+
+    Device->SDTR[FMC_SDRAM_BANK2] = tmpr1;
+    Device->SDTR[FMC_SDRAM_BANK1] = tmpr2;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the FMC_SDRAM peripheral
+  * @param  Device: Pointer to SDRAM device instance
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+  /* De-initialize the SDRAM device */
+  Device->SDCR[Bank] = 0x000002D0;
+  Device->SDTR[Bank] = 0x0FFFFFFF;
+  Device->SDCMR      = 0x00000000;
+  Device->SDRTR      = 0x00000000;
+  Device->SDSR       = 0x00000000;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup FMC_LL_SDRAMPrivate_Functions_Group2
+  *  @brief   management functions
+  *
+ at verbatim
+  ==============================================================================
+                      ##### FMC_SDRAM Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the FMC SDRAM interface.
+
+ at endverbatim
+  * @{
+  */
+/**
+  * @brief  Enables dynamically FMC_SDRAM write protection.
+  * @param  Device: Pointer to SDRAM device instance
+  * @param  Bank: SDRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+  /* Enable write protection */
+  Device->SDCR[Bank] |= FMC_SDRAM_WRITE_PROTECTION_ENABLE;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically FMC_SDRAM write protection.
+  * @param  hsdram: FMC_SDRAM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+  /* Disable write protection */
+  Device->SDCR[Bank] &= ~FMC_SDRAM_WRITE_PROTECTION_ENABLE;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Send Command to the FMC SDRAM bank
+  * @param  Device: Pointer to SDRAM device instance
+  * @param  Command: Pointer to SDRAM command structure
+  * @param  Timing: Pointer to SDRAM Timing structure
+  * @param  Timeout: Timeout wait value
+  * @retval HAL state
+  */
+HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout)
+{
+  __IO uint32_t tmpr = 0;
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_COMMAND_MODE(Command->CommandMode));
+  assert_param(IS_FMC_COMMAND_TARGET(Command->CommandTarget));
+  assert_param(IS_FMC_AUTOREFRESH_NUMBER(Command->AutoRefreshNumber));
+  assert_param(IS_FMC_MODE_REGISTER(Command->ModeRegisterDefinition));
+
+  /* Set command register */
+  tmpr = (uint32_t)((Command->CommandMode)                  |\
+                    (Command->CommandTarget)                |\
+                    (((Command->AutoRefreshNumber)-1) << 5) |\
+                    ((Command->ModeRegisterDefinition) << 9)
+                    );
+
+  Device->SDCMR = tmpr;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until command is send */
+  while(HAL_IS_BIT_SET(Device->SDSR, FMC_SDSR_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Program the SDRAM Memory Refresh rate.
+  * @param  Device: Pointer to SDRAM device instance
+  * @param  RefreshRate: The SDRAM refresh rate value.
+  * @retval HAL state
+  */
+HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_REFRESH_RATE(RefreshRate));
+
+  /* Set the refresh rate in command register */
+  Device->SDRTR |= (RefreshRate<<1);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the Number of consecutive SDRAM Memory auto Refresh commands.
+  * @param  Device: Pointer to SDRAM device instance
+  * @param  AutoRefreshNumber: Specifies the auto Refresh number.
+  * @retval None
+  */
+HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_AUTOREFRESH_NUMBER(AutoRefreshNumber));
+
+  /* Set the Auto-refresh number in command register */
+  Device->SDCMR |= (AutoRefreshNumber << 5);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the indicated FMC SDRAM bank mode status.
+  * @param  Device: Pointer to SDRAM device instance
+  * @param  Bank: Defines the FMC SDRAM bank. This parameter can be
+  *                     FMC_Bank1_SDRAM or FMC_Bank2_SDRAM.
+  * @retval The FMC SDRAM bank mode status, could be on of the following values:
+  *         FMC_SDRAM_NORMAL_MODE, FMC_SDRAM_SELF_REFRESH_MODE or
+  *         FMC_SDRAM_POWER_DOWN_MODE.
+  */
+uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+  /* Get the corresponding bank mode */
+  if(Bank == FMC_SDRAM_BANK1)
+  {
+    tmpreg = (uint32_t)(Device->SDSR & FMC_SDSR_MODES1);
+  }
+  else
+  {
+    tmpreg = ((uint32_t)(Device->SDSR & FMC_SDSR_MODES2) >> 2);
+  }
+
+  /* Return the mode status */
+  return tmpreg;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED || HAL_SDRAM_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c
new file mode 100644
index 0000000..9121e9e
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c
@@ -0,0 +1,955 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_ll_fsmc.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   FSMC Low Layer HAL module driver.
+  *
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Flexible Static Memory Controller (FSMC) peripheral memories:
+  *           + Initialization/de-initialization functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### FSMC peripheral features #####
+  ==============================================================================
+    [..] The Flexible static memory controller (FSMC) includes two memory controllers:
+         (+) The NOR/PSRAM memory controller
+         (+) The NAND/PC Card memory controller
+
+    [..] The FSMC functional block makes the interface with synchronous and asynchronous static
+         memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are:
+         (+) to translate AHB transactions into the appropriate external device protocol.
+         (+) to meet the access time requirements of the external memory devices.
+
+    [..] All external memories share the addresses, data and control signals with the controller.
+         Each external device is accessed by means of a unique Chip Select. The FSMC performs
+         only one access at a time to an external device.
+         The main features of the FSMC controller are the following:
+          (+) Interface with static-memory mapped devices including:
+             (++) Static random access memory (SRAM).
+             (++) Read-only memory (ROM).
+             (++) NOR Flash memory/OneNAND Flash memory.
+             (++) PSRAM (4 memory banks).
+             (++) 16-bit PC Card compatible devices.
+             (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
+                  data.
+          (+) Independent Chip Select control for each memory bank.
+          (+) Independent configuration for each memory bank.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FSMC_LL  FSMC Low Layer
+  * @brief FSMC driver modules
+  * @{
+  */
+
+#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED)
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup FSMC_LL_Private_Functions
+  * @{
+  */
+
+/** @addtogroup FSMC_LL_NORSRAM
+  * @brief    NORSRAM Controller functions
+  *
+  @verbatim
+  ==============================================================================
+                   ##### How to use NORSRAM device driver #####
+  ==============================================================================
+
+  [..]
+    This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order
+    to run the NORSRAM external devices.
+
+    (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit()
+    (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init()
+    (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init()
+    (+) FSMC NORSRAM bank extended timing configuration using the function
+        FSMC_NORSRAM_Extended_Timing_Init()
+    (+) FSMC NORSRAM bank enable/disable write operation using the functions
+        FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable()
+
+ at endverbatim
+  * @{
+  */
+
+/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group1
+  * @brief    Initialization and Configuration functions
+  *
+  @verbatim
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the FSMC NORSRAM interface
+    (+) De-initialize the FSMC NORSRAM interface
+    (+) Configure the FSMC clock and associated GPIOs
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initialize the FSMC_NORSRAM device according to the specified
+  *         control parameters in the FSMC_NORSRAM_InitTypeDef
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Init: Pointer to NORSRAM Initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef* Init)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank));
+  assert_param(IS_FSMC_MUX(Init->DataAddressMux));
+  assert_param(IS_FSMC_MEMORY(Init->MemoryType));
+  assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
+  assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode));
+  assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity));
+  assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode));
+  assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
+  assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation));
+  assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal));
+  assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode));
+  assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait));
+  assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst));
+
+  /* Get the BTCR register value */
+  tmpr = Device->BTCR[Init->NSBank];
+
+  /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WRAPMOD, WAITCFG, WREN,
+           WAITEN, EXTMOD, ASYNCWAIT, CBURSTRW and CCLKEN bits */
+  tmpr &= ((uint32_t)~(FSMC_BCR1_MBKEN     | FSMC_BCR1_MUXEN    | FSMC_BCR1_MTYP     | \
+                       FSMC_BCR1_MWID      | FSMC_BCR1_FACCEN   | FSMC_BCR1_BURSTEN  | \
+                       FSMC_BCR1_WAITPOL   | FSMC_BCR1_WRAPMOD  | FSMC_BCR1_WAITCFG  | \
+                       FSMC_BCR1_WREN      | FSMC_BCR1_WAITEN   | FSMC_BCR1_EXTMOD   | \
+                       FSMC_BCR1_ASYNCWAIT | FSMC_BCR1_CBURSTRW));
+  /* Set NORSRAM device control parameters */
+  tmpr |= (uint32_t)(Init->DataAddressMux       |\
+                     Init->MemoryType           |\
+                     Init->MemoryDataWidth      |\
+                     Init->BurstAccessMode      |\
+                     Init->WaitSignalPolarity   |\
+                     Init->WrapMode             |\
+                     Init->WaitSignalActive     |\
+                     Init->WriteOperation       |\
+                     Init->WaitSignal           |\
+                     Init->ExtendedMode         |\
+                     Init->AsynchronousWait     |\
+                     Init->WriteBurst
+                     );
+
+  if(Init->MemoryType == FSMC_MEMORY_TYPE_NOR)
+  {
+    tmpr |= (uint32_t)FSMC_NORSRAM_FLASH_ACCESS_ENABLE;
+  }
+
+  Device->BTCR[Init->NSBank] = tmpr;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitialize the FSMC_NORSRAM peripheral
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  ExDevice: Pointer to NORSRAM extended mode device instance
+  * @param  Bank: NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
+
+  /* Disable the FSMC_NORSRAM device */
+  __FSMC_NORSRAM_DISABLE(Device, Bank);
+
+  /* De-initialize the FSMC_NORSRAM device */
+  /* FSMC_NORSRAM_BANK1 */
+  if(Bank == FSMC_NORSRAM_BANK1)
+  {
+    Device->BTCR[Bank] = 0x000030DB;
+  }
+  /* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */
+  else
+  {
+    Device->BTCR[Bank] = 0x000030D2;
+  }
+
+  Device->BTCR[Bank + 1] = 0x0FFFFFFF;
+  ExDevice->BWTR[Bank]   = 0x0FFFFFFF;
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initialize the FSMC_NORSRAM Timing according to the specified
+  *         parameters in the FSMC_NORSRAM_TimingTypeDef
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Timing: Pointer to NORSRAM Timing structure
+  * @param  Bank: NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+  assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+  assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
+  assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+  assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
+  assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
+  assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
+
+  /* Get the BTCR register value */
+  tmpr = Device->BTCR[Bank + 1];
+
+  /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
+  tmpr &= ((uint32_t)~(FSMC_BTR1_ADDSET  | FSMC_BTR1_ADDHLD | FSMC_BTR1_DATAST | \
+                       FSMC_BTR1_BUSTURN | FSMC_BTR1_CLKDIV | FSMC_BTR1_DATLAT | \
+                       FSMC_BTR1_ACCMOD));
+
+  /* Set FSMC_NORSRAM device timing parameters */
+  tmpr |= (uint32_t)(Timing->AddressSetupTime                 |\
+                    ((Timing->AddressHoldTime) << 4)          |\
+                    ((Timing->DataSetupTime) << 8)            |\
+                    ((Timing->BusTurnAroundDuration) << 16)   |\
+                    (((Timing->CLKDivision)-1) << 20)         |\
+                    (((Timing->DataLatency)-2) << 24)         |\
+                    (Timing->AccessMode));
+
+  Device->BTCR[Bank + 1] = tmpr;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the FSMC_NORSRAM Extended mode Timing according to the specified
+  *         parameters in the FSMC_NORSRAM_TimingTypeDef
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Timing: Pointer to NORSRAM Timing structure
+  * @param  Bank: NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
+{
+  uint32_t tmpr = 0;
+
+  /* Set NORSRAM device timing register for write configuration, if extended mode is used */
+  if(ExtendedMode == FSMC_EXTENDED_MODE_ENABLE)
+  {
+    /* Check the parameters */
+    assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+    assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+    assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
+    assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+    assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
+    assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
+    assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
+
+    /* Get the BWTR register value */
+    tmpr = Device->BWTR[Bank];
+
+    /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
+    tmpr &= ((uint32_t)~(FSMC_BWTR1_ADDSET  | FSMC_BWTR1_ADDHLD | FSMC_BWTR1_DATAST | \
+                         FSMC_BWTR1_BUSTURN | FSMC_BWTR1_CLKDIV | FSMC_BWTR1_DATLAT | \
+                         FSMC_BWTR1_ACCMOD));
+
+    tmpr |= (uint32_t)(Timing->AddressSetupTime                 |\
+                     ((Timing->AddressHoldTime) << 4)          |\
+                     ((Timing->DataSetupTime) << 8)            |\
+                     ((Timing->BusTurnAroundDuration) << 16)   |\
+                     (((Timing->CLKDivision)-1) << 20)         |\
+                     (((Timing->DataLatency)-2) << 24)         |\
+                     (Timing->AccessMode));
+
+    Device->BWTR[Bank] = tmpr;
+  }
+  else
+  {
+    Device->BWTR[Bank] = 0x0FFFFFFF;
+  }
+
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group2
+  *  @brief   management functions
+  *
+ at verbatim
+  ==============================================================================
+                      ##### FSMC_NORSRAM Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the FSMC NORSRAM interface.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables dynamically FSMC_NORSRAM write operation.
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Bank: NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+  /* Enable write operation */
+  Device->BTCR[Bank] |= FSMC_WRITE_OPERATION_ENABLE;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically FSMC_NORSRAM write operation.
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Bank: NORSRAM bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+  /* Disable write operation */
+  Device->BTCR[Bank] &= ~FSMC_WRITE_OPERATION_ENABLE;
+
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup FSMC_LL_NAND
+  * @brief    NAND Controller functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use NAND device driver #####
+  ==============================================================================
+  [..]
+    This driver contains a set of APIs to interface with the FSMC NAND banks in order
+    to run the NAND external devices.
+
+    (+) FSMC NAND bank reset using the function FSMC_NAND_DeInit()
+    (+) FSMC NAND bank control configuration using the function FSMC_NAND_Init()
+    (+) FSMC NAND bank common space timing configuration using the function
+        FSMC_NAND_CommonSpace_Timing_Init()
+    (+) FSMC NAND bank attribute space timing configuration using the function
+        FSMC_NAND_AttributeSpace_Timing_Init()
+    (+) FSMC NAND bank enable/disable ECC correction feature using the functions
+        FSMC_NAND_ECC_Enable()/FSMC_NAND_ECC_Disable()
+    (+) FSMC NAND bank get ECC correction code using the function FSMC_NAND_GetECC()
+
+ at endverbatim
+  * @{
+  */
+
+/** @addtogroup FSMC_LL_NAND_Private_Functions_Group1
+  *  @brief    Initialization and Configuration functions
+  *
+ at verbatim
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the FSMC NAND interface
+    (+) De-initialize the FSMC NAND interface
+    (+) Configure the FSMC clock and associated GPIOs
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the FSMC_NAND device according to the specified
+  *         control parameters in the FSMC_NAND_HandleTypeDef
+  * @param  Device: Pointer to NAND device instance
+  * @param  Init: Pointer to NAND Initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init)
+{
+  uint32_t tmpr  = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_NAND_BANK(Init->NandBank));
+  assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
+  assert_param(IS_FSMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
+  assert_param(IS_FSMC_ECC_STATE(Init->EccComputation));
+  assert_param(IS_FSMC_ECCPAGE_SIZE(Init->ECCPageSize));
+  assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
+  assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
+
+    if(Init->NandBank == FSMC_NAND_BANK2)
+  {
+    /* Get the NAND bank 2 register value */
+    tmpr = Device->PCR2;
+  }
+  else
+  {
+    /* Get the NAND bank 3 register value */
+    tmpr = Device->PCR3;
+  }
+
+  /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
+  tmpr &= ((uint32_t)~(FSMC_PCR2_PWAITEN  | FSMC_PCR2_PBKEN | FSMC_PCR2_PTYP | \
+                       FSMC_PCR2_PWID | FSMC_PCR2_ECCEN | FSMC_PCR2_TCLR | \
+                       FSMC_PCR2_TAR | FSMC_PCR2_ECCPS));
+
+  /* Set NAND device control parameters */
+  tmpr |= (uint32_t)(Init->Waitfeature                |\
+                     FSMC_PCR_MEMORY_TYPE_NAND         |\
+                     Init->MemoryDataWidth            |\
+                     Init->EccComputation             |\
+                     Init->ECCPageSize                |\
+                     ((Init->TCLRSetupTime) << 9)     |\
+                     ((Init->TARSetupTime) << 13));
+
+  if(Init->NandBank == FSMC_NAND_BANK2)
+  {
+    /* NAND bank 2 registers configuration */
+    Device->PCR2  = tmpr;
+  }
+  else
+  {
+    /* NAND bank 3 registers configuration */
+    Device->PCR3  = tmpr;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FSMC_NAND Common space Timing according to the specified
+  *         parameters in the FSMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to NAND device instance
+  * @param  Timing: Pointer to NAND timing structure
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+  if(Bank == FSMC_NAND_BANK2)
+  {
+    /* Get the NAND bank 2 register value */
+    tmpr = Device->PMEM2;
+  }
+  else
+  {
+    /* Get the NAND bank 3 register value */
+    tmpr = Device->PMEM3;
+  }
+
+  /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+  tmpr &= ((uint32_t)~(FSMC_PMEM2_MEMSET2  | FSMC_PMEM2_MEMWAIT2 | FSMC_PMEM2_MEMHOLD2 | \
+                       FSMC_PMEM2_MEMHIZ2));
+
+  /* Set FSMC_NAND device timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                  |\
+                       ((Timing->WaitSetupTime) << 8)     |\
+                       ((Timing->HoldSetupTime) << 16)    |\
+                       ((Timing->HiZSetupTime) << 24)
+                       );
+
+  if(Bank == FSMC_NAND_BANK2)
+  {
+    /* NAND bank 2 registers configuration */
+    Device->PMEM2 = tmpr;
+  }
+  else
+  {
+    /* NAND bank 3 registers configuration */
+    Device->PMEM3 = tmpr;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FSMC_NAND Attribute space Timing according to the specified
+  *         parameters in the FSMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to NAND device instance
+  * @param  Timing: Pointer to NAND timing structure
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+  if(Bank == FSMC_NAND_BANK2)
+  {
+    /* Get the NAND bank 2 register value */
+    tmpr = Device->PATT2;
+  }
+  else
+  {
+    /* Get the NAND bank 3 register value */
+    tmpr = Device->PATT3;
+  }
+
+  /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+  tmpr &= ((uint32_t)~(FSMC_PATT2_ATTSET2  | FSMC_PATT2_ATTWAIT2 | FSMC_PATT2_ATTHOLD2 | \
+                       FSMC_PATT2_ATTHIZ2));
+
+  /* Set FSMC_NAND device timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                  |\
+                       ((Timing->WaitSetupTime) << 8)     |\
+                       ((Timing->HoldSetupTime) << 16)    |\
+                       ((Timing->HiZSetupTime) << 24)
+                       );
+
+  if(Bank == FSMC_NAND_BANK2)
+  {
+    /* NAND bank 2 registers configuration */
+    Device->PATT2 = tmpr;
+  }
+  else
+  {
+    /* NAND bank 3 registers configuration */
+    Device->PATT3 = tmpr;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the FSMC_NAND device
+  * @param  Device: Pointer to NAND device instance
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Disable the NAND Bank */
+  __FSMC_NAND_DISABLE(Device, Bank);
+
+  /* De-initialize the NAND Bank */
+  if(Bank == FSMC_NAND_BANK2)
+  {
+    /* Set the FSMC_NAND_BANK2 registers to their reset values */
+    Device->PCR2  = 0x00000018;
+    Device->SR2   = 0x00000040;
+    Device->PMEM2 = 0xFCFCFCFC;
+    Device->PATT2 = 0xFCFCFCFC;
+  }
+  /* FSMC_Bank3_NAND */
+  else
+  {
+    /* Set the FSMC_NAND_BANK3 registers to their reset values */
+    Device->PCR3  = 0x00000018;
+    Device->SR3   = 0x00000040;
+    Device->PMEM3 = 0xFCFCFCFC;
+    Device->PATT3 = 0xFCFCFCFC;
+  }
+
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @addtogroup FSMC_LL_NAND_Private_Functions_Group2
+  *  @brief   management functions
+  *
+ at verbatim
+  ==============================================================================
+                       ##### FSMC_NAND Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the FSMC NAND interface.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables dynamically FSMC_NAND ECC feature.
+  * @param  Device: Pointer to NAND device instance
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Enable ECC feature */
+  if(Bank == FSMC_NAND_BANK2)
+  {
+    Device->PCR2 |= FSMC_PCR2_ECCEN;
+  }
+  else
+  {
+    Device->PCR3 |= FSMC_PCR3_ECCEN;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically FSMC_NAND ECC feature.
+  * @param  Device: Pointer to NAND device instance
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Disable ECC feature */
+  if(Bank == FSMC_NAND_BANK2)
+  {
+    Device->PCR2 &= ~FSMC_PCR2_ECCEN;
+  }
+  else
+  {
+    Device->PCR3 &= ~FSMC_PCR3_ECCEN;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables dynamically FSMC_NAND ECC feature.
+  * @param  Device: Pointer to NAND device instance
+  * @param  ECCval: Pointer to ECC value
+  * @param  Bank: NAND bank number
+  * @param  Timeout: Timeout wait value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_NAND_DEVICE(Device));
+  assert_param(IS_FSMC_NAND_BANK(Bank));
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until FIFO is empty */
+  while(__FSMC_NAND_GET_FLAG(Device, Bank, FSMC_FLAG_FEMPT) == RESET)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  if(Bank == FSMC_NAND_BANK2)
+  {
+    /* Get the ECCR2 register value */
+    *ECCval = (uint32_t)Device->ECCR2;
+  }
+  else
+  {
+    /* Get the ECCR3 register value */
+    *ECCval = (uint32_t)Device->ECCR3;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup FSMC_LL_PCCARD
+  * @brief    PCCARD Controller functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use PCCARD device driver #####
+  ==============================================================================
+  [..]
+    This driver contains a set of APIs to interface with the FSMC PCCARD bank in order
+    to run the PCCARD/compact flash external devices.
+
+    (+) FSMC PCCARD bank reset using the function FSMC_PCCARD_DeInit()
+    (+) FSMC PCCARD bank control configuration using the function FSMC_PCCARD_Init()
+    (+) FSMC PCCARD bank common space timing configuration using the function
+        FSMC_PCCARD_CommonSpace_Timing_Init()
+    (+) FSMC PCCARD bank attribute space timing configuration using the function
+        FSMC_PCCARD_AttributeSpace_Timing_Init()
+    (+) FSMC PCCARD bank IO space timing configuration using the function
+        FSMC_PCCARD_IOSpace_Timing_Init()
+
+ at endverbatim
+  * @{
+  */
+
+/** @addtogroup FSMC_LL_PCCARD_Private_Functions_Group1
+  *  @brief   Initialization and Configuration functions
+  *
+ at verbatim
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the FSMC PCCARD interface
+    (+) De-initialize the FSMC PCCARD interface
+    (+) Configure the FSMC clock and associated GPIOs
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the FSMC_PCCARD device according to the specified
+  *         control parameters in the FSMC_PCCARD_HandleTypeDef
+  * @param  Device: Pointer to PCCARD device instance
+  * @param  Init: Pointer to PCCARD Initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
+  assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
+  assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
+
+  /* Get PCCARD control register value */
+  tmpr = Device->PCR4;
+
+  /* Clear TAR, TCLR, PWAITEN and PWID bits */
+  tmpr &= ((uint32_t)~(FSMC_PCR4_TAR  | FSMC_PCR4_TCLR | FSMC_PCR4_PWAITEN | \
+                       FSMC_PCR4_PWID));
+
+  /* Set FSMC_PCCARD device control parameters */
+  tmpr |= (uint32_t)(Init->Waitfeature               |\
+                     FSMC_NAND_PCC_MEM_BUS_WIDTH_16  |\
+                     (Init->TCLRSetupTime << 9)      |\
+                     (Init->TARSetupTime << 13));
+
+  Device->PCR4 = tmpr;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FSMC_PCCARD Common space Timing according to the specified
+  *         parameters in the FSMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to PCCARD device instance
+  * @param  Timing: Pointer to PCCARD timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+  /* Get PCCARD common space timing register value */
+  tmpr = Device->PMEM4;
+
+  /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+  tmpr &= ((uint32_t)~(FSMC_PMEM4_MEMSET4  | FSMC_PMEM4_MEMWAIT4 | FSMC_PMEM4_MEMHOLD4 | \
+                       FSMC_PMEM4_MEMHIZ4));
+  /* Set PCCARD timing parameters */
+  tmpr |= (uint32_t)((Timing->SetupTime                 |\
+                    ((Timing->WaitSetupTime) << 8)     |\
+                    (Timing->HoldSetupTime) << 16)    |\
+                    ((Timing->HiZSetupTime) << 24));
+
+  Device->PMEM4 = tmpr;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FSMC_PCCARD Attribute space Timing according to the specified
+  *         parameters in the FSMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to PCCARD device instance
+  * @param  Timing: Pointer to PCCARD timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+  /* Get PCCARD timing parameters */
+  tmpr = Device->PATT4;
+
+  /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+  tmpr &= ((uint32_t)~(FSMC_PATT4_ATTSET4  | FSMC_PATT4_ATTWAIT4 | FSMC_PATT4_ATTHOLD4 | \
+                       FSMC_PATT4_ATTHIZ4));
+
+  /* Set PCCARD timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                |\
+                   ((Timing->WaitSetupTime) << 8)     |\
+                   ((Timing->HoldSetupTime) << 16)    |\
+                   ((Timing->HiZSetupTime) << 24));
+  Device->PATT4 = tmpr;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FSMC_PCCARD IO space Timing according to the specified
+  *         parameters in the FSMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to PCCARD device instance
+  * @param  Timing: Pointer to PCCARD timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+  uint32_t tmpr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+  /* Get FSMC_PCCARD device timing parameters */
+  tmpr = Device->PIO4;
+
+  /* Clear IOSET4, IOWAIT4, IOHOLD4 and IOHIZ4 bits */
+  tmpr &= ((uint32_t)~(FSMC_PIO4_IOSET4  | FSMC_PIO4_IOWAIT4 | FSMC_PIO4_IOHOLD4 | \
+                       FSMC_PIO4_IOHIZ4));
+
+  /* Set FSMC_PCCARD device timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                  |\
+                     ((Timing->WaitSetupTime) << 8)     |\
+                     ((Timing->HoldSetupTime) << 16)    |\
+                     ((Timing->HiZSetupTime) << 24));
+
+  Device->PIO4 = tmpr;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the FSMC_PCCARD device
+  * @param  Device: Pointer to PCCARD device instance
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device)
+{
+  /* Disable the FSMC_PCCARD device */
+  __FSMC_PCCARD_DISABLE(Device);
+
+  /* De-initialize the FSMC_PCCARD device */
+  Device->PCR4    = 0x00000018;
+  Device->SR4     = 0x00000000;
+  Device->PMEM4   = 0xFCFCFCFC;
+  Device->PATT4   = 0xFCFCFCFC;
+  Device->PIO4    = 0xFCFCFCFC;
+
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c
new file mode 100644
index 0000000..bc33c7a
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c
@@ -0,0 +1,505 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_ll_sdmmc.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   SDMMC Low Layer HAL module driver.
+  *
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the SDMMC peripheral:
+  *           + Initialization/de-initialization functions
+  *           + I/O operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                       ##### SDMMC peripheral features #####
+  ==============================================================================
+    [..] The SD/SDIO MMC card host interface (SDIO) provides an interface between the APB2
+         peripheral bus and MultiMedia cards (MMCs), SD memory cards, SDIO cards and CE-ATA
+         devices.
+
+    [..] The SDIO features include the following:
+         (+) Full compliance with MultiMedia Card System Specification Version 4.2. Card support
+             for three different databus modes: 1-bit (default), 4-bit and 8-bit
+         (+) Full compatibility with previous versions of MultiMedia Cards (forward compatibility)
+         (+) Full compliance with SD Memory Card Specifications Version 2.0
+         (+) Full compliance with SD I/O Card Specification Version 2.0: card support for two
+             different data bus modes: 1-bit (default) and 4-bit
+         (+) Full support of the CE-ATA features (full compliance with CE-ATA digital protocol
+             Rev1.1)
+         (+) Data transfer up to 48 MHz for the 8 bit mode
+         (+) Data and command output enable signals to control external bidirectional drivers.
+
+
+                           ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      This driver is a considered as a driver of service for external devices drivers
+      that interfaces with the SDIO peripheral.
+      According to the device used (SD card/ MMC card / SDIO card ...), a set of APIs
+      is used in the device's driver to perform SDIO operations and functionalities.
+
+      This driver is almost transparent for the final user, it is only used to implement other
+      functionalities of the external device.
+
+    [..]
+      (+) The SDIO clock (SDIOCLK = 48 MHz) is coming from a specific output of PLL
+          (PLL48CLK). Before start working with SDIO peripheral make sure that the
+          PLL is well configured.
+          The SDIO peripheral uses two clock signals:
+          (++) SDIO adapter clock (SDIOCLK = 48 MHz)
+          (++) APB2 bus clock (PCLK2)
+
+          -@@- PCLK2 and SDIO_CK clock frequencies must respect the following condition:
+               Frequency(PCLK2) >= (3 / 8 x Frequency(SDIO_CK))
+
+      (+) Enable/Disable peripheral clock using RCC peripheral macros related to SDIO
+          peripheral.
+
+      (+) Enable the Power ON State using the SDIO_PowerState_ON(SDIOx)
+          function and disable it using the function SDIO_PowerState_OFF(SDIOx).
+
+      (+) Enable/Disable the clock using the __SDIO_ENABLE()/__SDIO_DISABLE() macros.
+
+      (+) Enable/Disable the peripheral interrupts using the macros __SDIO_ENABLE_IT(hsdio, IT)
+          and __SDIO_DISABLE_IT(hsdio, IT) if you need to use interrupt mode.
+
+      (+) When using the DMA mode
+          (++) Configure the DMA in the MSP layer of the external device
+          (++) Active the needed channel Request
+          (++) Enable the DMA using __SDIO_DMA_ENABLE() macro or Disable it using the macro
+               __SDIO_DMA_DISABLE().
+
+      (+) To control the CPSM (Command Path State Machine) and send
+          commands to the card use the SDIO_SendCommand(SDIOx),
+          SDIO_GetCommandResponse() and SDIO_GetResponse() functions. First, user has
+          to fill the command structure (pointer to SDIO_CmdInitTypeDef) according
+          to the selected command to be sent.
+          The parameters that should be filled are:
+           (++) Command Argument
+           (++) Command Index
+           (++) Command Response type
+           (++) Command Wait
+           (++) CPSM Status (Enable or Disable).
+
+          -@@- To check if the command is well received, read the SDIO_CMDRESP
+              register using the SDIO_GetCommandResponse().
+              The SDIO responses registers (SDIO_RESP1 to SDIO_RESP2), use the
+              SDIO_GetResponse() function.
+
+      (+) To control the DPSM (Data Path State Machine) and send/receive
+           data to/from the card use the SDIO_DataConfig(), SDIO_GetDataCounter(),
+          SDIO_ReadFIFO(), DIO_WriteFIFO() and SDIO_GetFIFOCount() functions.
+
+    *** Read Operations ***
+    =======================
+    [..]
+      (#) First, user has to fill the data structure (pointer to
+          SDIO_DataInitTypeDef) according to the selected data type to be received.
+          The parameters that should be filled are:
+           (++) Data Timeout
+           (++) Data Length
+           (++) Data Block size
+           (++) Data Transfer direction: should be from card (To SDIO)
+           (++) Data Transfer mode
+           (++) DPSM Status (Enable or Disable)
+
+      (#) Configure the SDIO resources to receive the data from the card
+          according to selected transfer mode (Refer to Step 8, 9 and 10).
+
+      (#) Send the selected Read command (refer to step 11).
+
+      (#) Use the SDIO flags/interrupts to check the transfer status.
+
+    *** Write Operations ***
+    ========================
+    [..]
+     (#) First, user has to fill the data structure (pointer to
+         SDIO_DataInitTypeDef) according to the selected data type to be received.
+         The parameters that should be filled are:
+          (++) Data Timeout
+          (++) Data Length
+          (++) Data Block size
+          (++) Data Transfer direction:  should be to card (To CARD)
+          (++) Data Transfer mode
+          (++) DPSM Status (Enable or Disable)
+
+     (#) Configure the SDIO resources to send the data to the card according to
+         selected transfer mode.
+
+     (#) Send the selected Write command.
+
+     (#) Use the SDIO flags/interrupts to check the transfer status.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SDMMC_LL SDMMC Low Layer
+  * @brief Low layer module for SD and MMC driver
+  * @{
+  */
+
+#if defined (HAL_SD_MODULE_ENABLED) || defined(HAL_MMC_MODULE_ENABLED)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup SDMMC_LL_Exported_Functions SDMMC_LL Exported Functions
+  * @{
+  */
+
+/** @defgroup HAL_SDMMC_LL_Group1 Initialization/de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+              ##### Initialization/de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the SDIO according to the specified
+  *         parameters in the SDIO_InitTypeDef and create the associated handle.
+  * @param  SDIOx: Pointer to SDIO register base
+  * @param  Init: SDIO initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_SDIO_ALL_INSTANCE(SDIOx));
+  assert_param(IS_SDIO_CLOCK_EDGE(Init.ClockEdge));
+  assert_param(IS_SDIO_CLOCK_BYPASS(Init.ClockBypass));
+  assert_param(IS_SDIO_CLOCK_POWER_SAVE(Init.ClockPowerSave));
+  assert_param(IS_SDIO_BUS_WIDE(Init.BusWide));
+  assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(Init.HardwareFlowControl));
+  assert_param(IS_SDIO_CLKDIV(Init.ClockDiv));
+
+  /* Set SDIO configuration parameters */
+  tmpreg |= (Init.ClockEdge           |\
+             Init.ClockBypass         |\
+             Init.ClockPowerSave      |\
+             Init.BusWide             |\
+             Init.HardwareFlowControl |\
+             Init.ClockDiv
+             );
+
+  /* Write to SDIO CLKCR */
+  MODIFY_REG(SDIOx->CLKCR, CLKCR_CLEAR_MASK, tmpreg);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SDMMC_LL_Group2 I/O operation functions
+ *  @brief   Data transfers functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### I/O operation functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the SDIO data
+    transfers.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Read data (word) from Rx FIFO in blocking mode (polling)
+  * @param  SDIOx: Pointer to SDIO register base
+  * @retval HAL status
+  */
+uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx)
+{
+  /* Read data from Rx FIFO */
+  return (SDIOx->FIFO);
+}
+
+/**
+  * @brief  Write data (word) to Tx FIFO in blocking mode (polling)
+  * @param  SDIOx: Pointer to SDIO register base
+  * @param  pWriteData: pointer to data to write
+  * @retval HAL status
+  */
+HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData)
+{
+  /* Write data to FIFO */
+  SDIOx->FIFO = *pWriteData;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SDMMC_LL_Group3 Peripheral Control functions
+ *  @brief   management functions
+ *
+ at verbatim
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the SDIO data
+    transfers.
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Set SDIO Power state to ON.
+  * @param  SDIOx: Pointer to SDIO register base
+  * @retval HAL status
+  */
+HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx)
+{
+  /* Set power state to ON */
+  SDIOx->POWER = SDIO_POWER_PWRCTRL;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set SDIO Power state to OFF.
+  * @param  SDIOx: Pointer to SDIO register base
+  * @retval HAL status
+  */
+HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx)
+{
+  /* Set power state to OFF */
+  SDIOx->POWER = (uint32_t)0x00000000;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Get SDIO Power state.
+  * @param  SDIOx: Pointer to SDIO register base
+  * @retval Power status of the controller. The returned value can be one of the
+  *         following values:
+  *            - 0x00: Power OFF
+  *            - 0x02: Power UP
+  *            - 0x03: Power ON
+  */
+uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx)
+{
+  return (SDIOx->POWER & SDIO_POWER_PWRCTRL);
+}
+
+/**
+  * @brief  Configure the SDIO command path according to the specified parameters in
+  *         SDIO_CmdInitTypeDef structure and send the command
+  * @param  SDIOx: Pointer to SDIO register base
+  * @param  SDIO_CmdInitStruct: pointer to a SDIO_CmdInitTypeDef structure that contains
+  *         the configuration information for the SDIO command
+  * @retval HAL status
+  */
+HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->CmdIndex));
+  assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->Response));
+  assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->WaitForInterrupt));
+  assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->CPSM));
+
+  /* Set the SDIO Argument value */
+  SDIOx->ARG = SDIO_CmdInitStruct->Argument;
+
+  /* Set SDIO command parameters */
+  tmpreg |= (uint32_t)(SDIO_CmdInitStruct->CmdIndex         |\
+                       SDIO_CmdInitStruct->Response         |\
+                       SDIO_CmdInitStruct->WaitForInterrupt |\
+                       SDIO_CmdInitStruct->CPSM);
+
+  /* Write to SDIO CMD register */
+  MODIFY_REG(SDIOx->CMD, CMD_CLEAR_MASK, tmpreg);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Return the command index of last command for which response received
+  * @param  SDIOx: Pointer to SDIO register base
+  * @retval Command index of the last command response received
+  */
+uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx)
+{
+  return (uint8_t)(SDIOx->RESPCMD);
+}
+
+
+/**
+  * @brief  Return the response received from the card for the last command
+  * @param  SDIO_RESP: Specifies the SDIO response register.
+  *          This parameter can be one of the following values:
+  *            @arg SDIO_RESP1: Response Register 1
+  *            @arg SDIO_RESP2: Response Register 2
+  *            @arg SDIO_RESP3: Response Register 3
+  *            @arg SDIO_RESP4: Response Register 4
+  * @retval The Corresponding response register value
+  */
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP)
+{
+  __IO uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_SDIO_RESP(SDIO_RESP));
+
+  /* Get the response */
+  tmp = SDIO_RESP_ADDR + SDIO_RESP;
+
+  return (*(__IO uint32_t *) tmp);
+}
+
+/**
+  * @brief  Configure the SDIO data path according to the specified
+  *         parameters in the SDIO_DataInitTypeDef.
+  * @param  SDIOx: Pointer to SDIO register base
+  * @param  SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure
+  *         that contains the configuration information for the SDIO command.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->DataLength));
+  assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->DataBlockSize));
+  assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->TransferDir));
+  assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->TransferMode));
+  assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->DPSM));
+
+  /* Set the SDIO Data Timeout value */
+  SDIOx->DTIMER = SDIO_DataInitStruct->DataTimeOut;
+
+  /* Set the SDIO DataLength value */
+  SDIOx->DLEN = SDIO_DataInitStruct->DataLength;
+
+  /* Set the SDIO data configuration parameters */
+  tmpreg |= (uint32_t)(SDIO_DataInitStruct->DataBlockSize |\
+                       SDIO_DataInitStruct->TransferDir   |\
+                       SDIO_DataInitStruct->TransferMode  |\
+                       SDIO_DataInitStruct->DPSM);
+
+  /* Write to SDIO DCTRL */
+  MODIFY_REG(SDIOx->DCTRL, DCTRL_CLEAR_MASK, tmpreg);
+
+  return HAL_OK;
+
+}
+
+/**
+  * @brief  Returns number of remaining data bytes to be transferred.
+  * @param  SDIOx: Pointer to SDIO register base
+  * @retval Number of remaining data bytes to be transferred
+  */
+uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx)
+{
+  return (SDIOx->DCOUNT);
+}
+
+/**
+  * @brief  Get the FIFO data
+  * @param  SDIOx: Pointer to SDIO register base
+  * @retval Data received
+  */
+uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx)
+{
+  return (SDIOx->FIFO);
+}
+
+
+/**
+  * @brief  Sets one of the two options of inserting read wait interval.
+  * @param  SDIO_ReadWaitMode: SD I/O Read Wait operation mode.
+  *          This parameter can be:
+  *            @arg SDIO_READ_WAIT_MODE_CLK: Read Wait control by stopping SDIOCLK
+  *            @arg SDIO_READ_WAIT_MODE_DATA2: Read Wait control using SDIO_DATA2
+  * @retval None
+  */
+HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode)
+{
+  /* Check the parameters */
+  assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode));
+
+  *(__IO uint32_t *)DCTRL_RWMOD_BB = SDIO_ReadWaitMode;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* (HAL_SD_MODULE_ENABLED) || (HAL_MMC_MODULE_ENABLED) */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c
new file mode 100644
index 0000000..f45004c
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c
@@ -0,0 +1,1705 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_ll_usb.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   USB Low Layer HAL module driver.
+  *
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the USB Peripheral Controller:
+  *           + Initialization/de-initialization functions
+  *           + I/O operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure.
+
+      (#) Call USB_CoreInit() API to initialize the USB Core peripheral.
+
+      (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_LL_USB_DRIVER
+  * @{
+  */
+
+#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx);
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup LL_USB_Exported_Functions USB Low Layer Exported Functions
+  * @{
+  */
+
+/** @defgroup LL_USB_Group1 Initialization/de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+ at verbatim
+ ===============================================================================
+              ##### Initialization/de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+
+ at endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the USB Core
+  * @param  USBx: USB Instance
+  * @param  cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+  *         the configuration information for the specified USBx peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+  if (cfg.phy_itface == USB_OTG_ULPI_PHY)
+  {
+
+    USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN);
+
+    /* Init The ULPI Interface */
+    USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL);
+
+    /* Select vbus source */
+    USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI);
+    if(cfg.use_external_vbus == 1)
+    {
+      USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD;
+    }
+    /* Reset after a PHY select  */
+    USB_CoreReset(USBx);
+  }
+  else /* FS interface (embedded Phy) */
+  {
+    /* Select FS Embedded PHY */
+    USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
+
+    /* Reset after a PHY select and set Host mode */
+    USB_CoreReset(USBx);
+
+    /* Deactivate the power down*/
+    USBx->GCCFG = USB_OTG_GCCFG_PWRDWN;
+  }
+
+  if(cfg.dma_enable == ENABLE)
+  {
+    USBx->GAHBCFG |= (USB_OTG_GAHBCFG_HBSTLEN_1 | USB_OTG_GAHBCFG_HBSTLEN_2);
+    USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_EnableGlobalInt
+  *         Enables the controller's Global Int in the AHB Config reg
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
+{
+  USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT;
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  USB_DisableGlobalInt
+  *         Disable the controller's Global Int in the AHB Config reg
+  * @param  USBx : Selected device
+  * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
+{
+  USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT;
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_SetCurrentMode : Set functional mode
+  * @param  USBx : Selected device
+  * @param  mode :  current core mode
+  *          This parameter can be one of these values:
+  *            @arg USB_OTG_DEVICE_MODE: Peripheral mode
+  *            @arg USB_OTG_HOST_MODE: Host mode
+  *            @arg USB_OTG_DRD_MODE: Dual Role Device mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode)
+{
+  USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD);
+
+  if ( mode == USB_OTG_HOST_MODE)
+  {
+    USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD;
+  }
+  else if ( mode == USB_OTG_DEVICE_MODE)
+  {
+    USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
+  }
+  HAL_Delay(50);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_DevInit : Initializes the USB_OTG controller registers
+  *         for device mode
+  * @param  USBx : Selected device
+  * @param  cfg  : pointer to a USB_OTG_CfgTypeDef structure that contains
+  *         the configuration information for the specified USBx peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_DevInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+  uint32_t i = 0;
+
+  /*Activate VBUS Sensing B */
+#if defined(STM32F446xx)
+  USBx->GCCFG |= USB_OTG_GCCFG_VBDEN;
+
+  if (cfg.vbus_sensing_enable == 0)
+  {
+    /* Deactivate VBUS Sensing B */
+    USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN;
+
+    /* B-peripheral session valid override enable*/
+    USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
+    USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
+  }
+#else
+  USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
+
+  if (cfg.vbus_sensing_enable == 0)
+  {
+    USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
+  }
+#endif /* STM32F446xx */
+
+  /* Restart the Phy Clock */
+  USBx_PCGCCTL = 0;
+
+  /* Device mode configuration */
+  USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80;
+
+  if(cfg.phy_itface  == USB_OTG_ULPI_PHY)
+  {
+    if(cfg.speed == USB_OTG_SPEED_HIGH)
+    {
+      /* Set High speed phy */
+      USB_SetDevSpeed (USBx , USB_OTG_SPEED_HIGH);
+    }
+    else
+    {
+      /* set High speed phy in Full speed mode */
+      USB_SetDevSpeed (USBx , USB_OTG_SPEED_HIGH_IN_FULL);
+    }
+  }
+  else
+  {
+    /* Set Full speed phy */
+    USB_SetDevSpeed (USBx , USB_OTG_SPEED_FULL);
+  }
+
+  /* Flush the FIFOs */
+  USB_FlushTxFifo(USBx , 0x10); /* all Tx FIFOs */
+  USB_FlushRxFifo(USBx);
+
+  /* Clear all pending Device Interrupts */
+  USBx_DEVICE->DIEPMSK = 0;
+  USBx_DEVICE->DOEPMSK = 0;
+  USBx_DEVICE->DAINT = 0xFFFFFFFF;
+  USBx_DEVICE->DAINTMSK = 0;
+
+  for (i = 0; i < cfg.dev_endpoints; i++)
+  {
+    if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)
+    {
+      USBx_INEP(i)->DIEPCTL = (USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK);
+    }
+    else
+    {
+      USBx_INEP(i)->DIEPCTL = 0;
+    }
+
+    USBx_INEP(i)->DIEPTSIZ = 0;
+    USBx_INEP(i)->DIEPINT  = 0xFF;
+  }
+
+  for (i = 0; i < cfg.dev_endpoints; i++)
+  {
+    if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA)
+    {
+      USBx_OUTEP(i)->DOEPCTL = (USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK);
+    }
+    else
+    {
+      USBx_OUTEP(i)->DOEPCTL = 0;
+    }
+
+    USBx_OUTEP(i)->DOEPTSIZ = 0;
+    USBx_OUTEP(i)->DOEPINT  = 0xFF;
+  }
+
+  USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM);
+
+  if (cfg.dma_enable == 1)
+  {
+    /*Set threshold parameters */
+    USBx_DEVICE->DTHRCTL = (USB_OTG_DTHRCTL_TXTHRLEN_6 | USB_OTG_DTHRCTL_RXTHRLEN_6);
+    USBx_DEVICE->DTHRCTL |= (USB_OTG_DTHRCTL_RXTHREN | USB_OTG_DTHRCTL_ISOTHREN | USB_OTG_DTHRCTL_NONISOTHREN);
+
+    i= USBx_DEVICE->DTHRCTL;
+  }
+
+  /* Disable all interrupts. */
+  USBx->GINTMSK = 0;
+
+  /* Clear any pending interrupts */
+  USBx->GINTSTS = 0xBFFFFFFF;
+
+  /* Enable the common interrupts */
+  if (cfg.dma_enable == DISABLE)
+  {
+    USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
+  }
+
+  /* Enable interrupts matching to the Device mode ONLY */
+  USBx->GINTMSK |= (USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST |\
+                    USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT |\
+                    USB_OTG_GINTMSK_OEPINT   | USB_OTG_GINTMSK_IISOIXFRM|\
+                    USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
+
+  if(cfg.Sof_enable)
+  {
+    USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM;
+  }
+
+  if (cfg.vbus_sensing_enable == ENABLE)
+  {
+    USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT);
+  }
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  USB_OTG_FlushTxFifo : Flush a Tx FIFO
+  * @param  USBx : Selected device
+  * @param  num : FIFO number
+  *         This parameter can be a value from 1 to 15
+            15 means Flush all Tx FIFOs
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num )
+{
+  uint32_t count = 0;
+
+  USBx->GRSTCTL = ( USB_OTG_GRSTCTL_TXFFLSH |(uint32_t)( num << 6));
+
+  do
+  {
+    if (++count > 200000)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH);
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  USB_FlushRxFifo : Flush Rx FIFO
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx)
+{
+  uint32_t count = 0;
+
+  USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH;
+
+  do
+  {
+    if (++count > 200000)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_SetDevSpeed :Initializes the DevSpd field of DCFG register
+  *         depending the PHY type and the enumeration speed of the device.
+  * @param  USBx : Selected device
+  * @param  speed : device speed
+  *          This parameter can be one of these values:
+  *            @arg USB_OTG_SPEED_HIGH: High speed mode
+  *            @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode
+  *            @arg USB_OTG_SPEED_FULL: Full speed mode
+  *            @arg USB_OTG_SPEED_LOW: Low speed mode
+  * @retval  Hal status
+  */
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed)
+{
+  USBx_DEVICE->DCFG |= speed;
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_GetDevSpeed :Return the  Dev Speed
+  * @param  USBx : Selected device
+  * @retval speed : device speed
+  *          This parameter can be one of these values:
+  *            @arg USB_OTG_SPEED_HIGH: High speed mode
+  *            @arg USB_OTG_SPEED_FULL: Full speed mode
+  *            @arg USB_OTG_SPEED_LOW: Low speed mode
+  */
+uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx)
+{
+  uint8_t speed = 0;
+
+  if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ)
+  {
+    speed = USB_OTG_SPEED_HIGH;
+  }
+  else if (((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ)||
+           ((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_48MHZ))
+  {
+    speed = USB_OTG_SPEED_FULL;
+  }
+  else if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
+  {
+    speed = USB_OTG_SPEED_LOW;
+  }
+
+  return speed;
+}
+
+/**
+  * @brief  Activate and configure an endpoint
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+  if (ep->is_in == 1)
+  {
+   USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)));
+
+    if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0)
+    {
+      USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+        ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+    }
+
+  }
+  else
+  {
+     USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16);
+
+    if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0)
+    {
+      USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+       (USB_OTG_DIEPCTL_SD0PID_SEVNFRM)| (USB_OTG_DOEPCTL_USBAEP));
+    }
+  }
+  return HAL_OK;
+}
+/**
+  * @brief  Activate and configure a dedicated endpoint
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+  static __IO uint32_t debug = 0;
+
+  /* Read DEPCTLn register */
+  if (ep->is_in == 1)
+  {
+    if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0)
+    {
+      USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+        ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+    }
+
+
+    debug  |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+        ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
+
+   USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)));
+  }
+  else
+  {
+    if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0)
+    {
+      USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+        ((ep->num) << 22 ) | (USB_OTG_DOEPCTL_USBAEP));
+
+      debug = (uint32_t)(((uint32_t )USBx) + USB_OTG_OUT_ENDPOINT_BASE + (0)*USB_OTG_EP_REG_SIZE);
+      debug = (uint32_t )&USBx_OUTEP(ep->num)->DOEPCTL;
+      debug |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+        ((ep->num) << 22 ) | (USB_OTG_DOEPCTL_USBAEP));
+    }
+
+     USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16);
+  }
+
+  return HAL_OK;
+}
+/**
+  * @brief  De-activate and de-initialize an endpoint
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+  /* Read DEPCTLn register */
+  if (ep->is_in == 1)
+  {
+   USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
+   USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
+   USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
+  }
+  else
+  {
+     USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
+     USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
+     USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  De-activate and de-initialize a dedicated endpoint
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+  /* Read DEPCTLn register */
+  if (ep->is_in == 1)
+  {
+   USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
+   USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
+  }
+  else
+  {
+     USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
+     USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_EPStartXfer : setup and starts a transfer over an EP
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @param  dma: USB dma enabled or disabled
+  *          This parameter can be one of these values:
+  *           0 : DMA feature not used
+  *           1 : DMA feature used
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma)
+{
+  uint16_t pktcnt = 0;
+
+  /* IN endpoint */
+  if (ep->is_in == 1)
+  {
+    /* Zero Length Packet? */
+    if (ep->xfer_len == 0)
+    {
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+      USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ;
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+    }
+    else
+    {
+      /* Program the transfer size and packet count
+      * as follows: xfersize = N * maxpacket +
+      * short_packet pktcnt = N + (short_packet
+      * exist ? 1 : 0)
+      */
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+      USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket) << 19)) ;
+      USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
+
+      if (ep->type == EP_TYPE_ISOC)
+      {
+        USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT);
+        USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1 << 29));
+      }
+    }
+
+    if (dma == 1)
+    {
+      USBx_INEP(ep->num)->DIEPDMA = (uint32_t)(ep->dma_addr);
+    }
+    else
+    {
+      if (ep->type != EP_TYPE_ISOC)
+      {
+        /* Enable the Tx FIFO Empty Interrupt for this EP */
+        if (ep->xfer_len > 0)
+        {
+          USBx_DEVICE->DIEPEMPMSK |= 1 << ep->num;
+        }
+      }
+    }
+
+    if (ep->type == EP_TYPE_ISOC)
+    {
+      if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0)
+      {
+        USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM;
+      }
+      else
+      {
+        USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM;
+      }
+    }
+
+    /* EP enable, IN data in FIFO */
+    USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
+
+    if (ep->type == EP_TYPE_ISOC)
+    {
+      USB_WritePacket(USBx, ep->xfer_buff, ep->num, ep->xfer_len, dma);
+    }
+  }
+  else /* OUT endpoint */
+  {
+    /* Program the transfer size and packet count as follows:
+    * pktcnt = N
+    * xfersize = N * maxpacket
+    */
+    USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
+    USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
+
+    if (ep->xfer_len == 0)
+    {
+      USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket);
+      USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)) ;
+    }
+    else
+    {
+      pktcnt = (ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket;
+      USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (pktcnt << 19)); ;
+      USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt));
+    }
+
+    if (dma == 1)
+    {
+      USBx_OUTEP(ep->num)->DOEPDMA = (uint32_t)ep->xfer_buff;
+    }
+
+    if (ep->type == EP_TYPE_ISOC)
+    {
+      if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0)
+      {
+        USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM;
+      }
+      else
+      {
+        USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM;
+      }
+    }
+    /* EP enable */
+    USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_EP0StartXfer : setup and starts a transfer over the EP  0
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @param  dma: USB dma enabled or disabled
+  *          This parameter can be one of these values:
+  *           0 : DMA feature not used
+  *           1 : DMA feature used
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma)
+{
+  /* IN endpoint */
+  if (ep->is_in == 1)
+  {
+    /* Zero Length Packet? */
+    if (ep->xfer_len == 0)
+    {
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+      USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ;
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+    }
+    else
+    {
+      /* Program the transfer size and packet count
+      * as follows: xfersize = N * maxpacket +
+      * short_packet pktcnt = N + (short_packet
+      * exist ? 1 : 0)
+      */
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
+
+      if(ep->xfer_len > ep->maxpacket)
+      {
+        ep->xfer_len = ep->maxpacket;
+      }
+      USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ;
+      USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
+
+    }
+
+    if (dma == 1)
+    {
+      USBx_INEP(ep->num)->DIEPDMA = (uint32_t)(ep->dma_addr);
+    }
+    else
+    {
+      /* Enable the Tx FIFO Empty Interrupt for this EP */
+      if (ep->xfer_len > 0)
+      {
+        USBx_DEVICE->DIEPEMPMSK |= 1 << (ep->num);
+      }
+    }
+
+    /* EP enable, IN data in FIFO */
+    USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
+  }
+  else /* OUT endpoint */
+  {
+    /* Program the transfer size and packet count as follows:
+    * pktcnt = N
+    * xfersize = N * maxpacket
+    */
+    USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
+    USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
+
+    if (ep->xfer_len > 0)
+    {
+      ep->xfer_len = ep->maxpacket;
+    }
+
+    USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19));
+    USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket));
+
+
+    if (dma == 1)
+    {
+      USBx_OUTEP(ep->num)->DOEPDMA = (uint32_t)(ep->xfer_buff);
+    }
+
+    /* EP enable */
+    USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_WritePacket : Writes a packet into the Tx FIFO associated
+  *         with the EP/channel
+  * @param  USBx : Selected device
+  * @param  src :  pointer to source buffer
+  * @param  ch_ep_num : endpoint or host channel number
+  * @param  len : Number of bytes to write
+  * @param  dma: USB dma enabled or disabled
+  *          This parameter can be one of these values:
+  *           0 : DMA feature not used
+  *           1 : DMA feature used
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma)
+{
+  uint32_t count32b= 0 , i= 0;
+
+  if (dma == 0)
+  {
+    count32b =  (len + 3) / 4;
+    for (i = 0; i < count32b; i++, src += 4)
+    {
+      USBx_DFIFO(ch_ep_num) = *((__packed uint32_t *)src);
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_ReadPacket : read a packet from the Tx FIFO associated
+  *         with the EP/channel
+  * @param  USBx : Selected device
+  * @param  src : source pointer
+  * @param  ch_ep_num : endpoint or host channel number
+  * @param  len : Number of bytes to read
+  * @param  dma: USB dma enabled or disabled
+  *          This parameter can be one of these values:
+  *           0 : DMA feature not used
+  *           1 : DMA feature used
+  * @retval pointer to destination buffer
+  */
+void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len)
+{
+  uint32_t i=0;
+  uint32_t count32b = (len + 3) / 4;
+
+  for ( i = 0; i < count32b; i++, dest += 4 )
+  {
+    *(__packed uint32_t *)dest = USBx_DFIFO(0);
+
+  }
+  return ((void *)dest);
+}
+
+/**
+  * @brief  USB_EPSetStall : set a stall condition over an EP
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep)
+{
+  if (ep->is_in == 1)
+  {
+    if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == 0)
+    {
+      USBx_INEP(ep->num)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS);
+    }
+    USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_STALL;
+  }
+  else
+  {
+    if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == 0)
+    {
+      USBx_OUTEP(ep->num)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS);
+    }
+    USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_STALL;
+  }
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  USB_EPClearStall : Clear a stall condition over an EP
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+  if (ep->is_in == 1)
+  {
+    USBx_INEP(ep->num)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL;
+    if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
+    {
+       USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */
+    }
+  }
+  else
+  {
+    USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL;
+    if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
+    {
+      USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_StopDevice : Stop the usb device mode
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx)
+{
+  uint32_t i;
+
+  /* Clear Pending interrupt */
+  for (i = 0; i < 15 ; i++)
+  {
+    USBx_INEP(i)->DIEPINT  = 0xFF;
+    USBx_OUTEP(i)->DOEPINT  = 0xFF;
+  }
+  USBx_DEVICE->DAINT = 0xFFFFFFFF;
+
+  /* Clear interrupt masks */
+  USBx_DEVICE->DIEPMSK  = 0;
+  USBx_DEVICE->DOEPMSK  = 0;
+  USBx_DEVICE->DAINTMSK = 0;
+
+  /* Flush the FIFO */
+  USB_FlushRxFifo(USBx);
+  USB_FlushTxFifo(USBx ,  0x10 );
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_SetDevAddress : Stop the usb device mode
+  * @param  USBx : Selected device
+  * @param  address : new device address to be assigned
+  *          This parameter can be a value from 0 to 255
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address)
+{
+  USBx_DEVICE->DCFG &= ~ (USB_OTG_DCFG_DAD);
+  USBx_DEVICE->DCFG |= (address << 4) & USB_OTG_DCFG_DAD ;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  USB_DevConnect (USB_OTG_GlobalTypeDef *USBx)
+{
+  USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS ;
+  HAL_Delay(3);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx)
+{
+  USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS ;
+  HAL_Delay(3);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_ReadInterrupts: return the global USB interrupt status
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+uint32_t  USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx)
+{
+  uint32_t v = 0;
+
+  v = USBx->GINTSTS;
+  v &= USBx->GINTMSK;
+  return v;
+}
+
+/**
+  * @brief  USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+  uint32_t v;
+  v  = USBx_DEVICE->DAINT;
+  v &= USBx_DEVICE->DAINTMSK;
+  return ((v & 0xffff0000) >> 16);
+}
+
+/**
+  * @brief  USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+  uint32_t v;
+  v  = USBx_DEVICE->DAINT;
+  v &= USBx_DEVICE->DAINTMSK;
+  return ((v & 0xFFFF));
+}
+
+/**
+  * @brief  Returns Device OUT EP Interrupt register
+  * @param  USBx : Selected device
+  * @param  epnum : endpoint number
+  *          This parameter can be a value from 0 to 15
+  * @retval Device OUT EP Interrupt register
+  */
+uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
+{
+  uint32_t v;
+  v  = USBx_OUTEP(epnum)->DOEPINT;
+  v &= USBx_DEVICE->DOEPMSK;
+  return v;
+}
+
+/**
+  * @brief  Returns Device IN EP Interrupt register
+  * @param  USBx : Selected device
+  * @param  epnum : endpoint number
+  *          This parameter can be a value from 0 to 15
+  * @retval Device IN EP Interrupt register
+  */
+uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
+{
+  uint32_t v, msk, emp;
+
+  msk = USBx_DEVICE->DIEPMSK;
+  emp = USBx_DEVICE->DIEPEMPMSK;
+  msk |= ((emp >> epnum) & 0x1) << 7;
+  v = USBx_INEP(epnum)->DIEPINT & msk;
+  return v;
+}
+
+/**
+  * @brief  USB_ClearInterrupts: clear a USB interrupt
+  * @param  USBx : Selected device
+  * @param  interrupt : interrupt flag
+  * @retval None
+  */
+void  USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt)
+{
+  USBx->GINTSTS |= interrupt;
+}
+
+/**
+  * @brief  Returns USB core mode
+  * @param  USBx : Selected device
+  * @retval return core mode : Host or Device
+  *          This parameter can be one of these values:
+  *           0 : Host
+  *           1 : Device
+  */
+uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx)
+{
+  return ((USBx->GINTSTS ) & 0x1);
+}
+
+
+/**
+  * @brief  Activate EP0 for Setup transactions
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx)
+{
+  /* Set the MPS of the IN EP based on the enumeration speed */
+  USBx_INEP(0)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ;
+
+  if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
+  {
+    USBx_INEP(0)->DIEPCTL |= 3;
+  }
+  USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK;
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Prepare the EP0 to start the first control setup
+  * @param  USBx : Selected device
+  * @param  dma: USB dma enabled or disabled
+  *          This parameter can be one of these values:
+  *           0 : DMA feature not used
+  *           1 : DMA feature used
+  * @param  psetup : pointer to setup packet
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup)
+{
+  USBx_OUTEP(0)->DOEPTSIZ = 0;
+  USBx_OUTEP(0)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)) ;
+  USBx_OUTEP(0)->DOEPTSIZ |= (3 * 8);
+  USBx_OUTEP(0)->DOEPTSIZ |=  USB_OTG_DOEPTSIZ_STUPCNT;
+
+  if (dma == 1)
+  {
+    USBx_OUTEP(0)->DOEPDMA = (uint32_t)psetup;
+    /* EP enable */
+    USBx_OUTEP(0)->DOEPCTL = 0x80008000;
+  }
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Reset the USB Core (needed after USB clock settings change)
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx)
+{
+  uint32_t count = 0;
+
+  /* Wait for AHB master IDLE state. */
+  do
+  {
+    if (++count > 200000)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0);
+
+  /* Core Soft Reset */
+  count = 0;
+  USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST;
+
+  do
+  {
+    if (++count > 200000)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST);
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  USB_HostInit : Initializes the USB OTG controller registers
+  *         for Host mode
+  * @param  USBx : Selected device
+  * @param  cfg  : pointer to a USB_OTG_CfgTypeDef structure that contains
+  *         the configuration information for the specified USBx peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+  uint32_t i;
+
+  /* Restart the Phy Clock */
+  USBx_PCGCCTL = 0;
+
+  /* Activate VBUS Sensing B */
+#if defined(STM32F446xx)
+  USBx->GCCFG |= USB_OTG_GCCFG_VBDEN;
+#else
+  USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSASEN);
+  USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSBSEN);
+  USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
+#endif /* STM32F446xx */
+
+  /* Disable the FS/LS support mode only */
+  if((cfg.speed == USB_OTG_SPEED_FULL)&&
+     (USBx != USB_OTG_FS))
+  {
+    USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS;
+  }
+  else
+  {
+    USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS);
+  }
+
+  /* Make sure the FIFOs are flushed. */
+  USB_FlushTxFifo(USBx, 0x10 ); /* all Tx FIFOs */
+  USB_FlushRxFifo(USBx);
+
+  /* Clear all pending HC Interrupts */
+  for (i = 0; i < cfg.Host_channels; i++)
+  {
+    USBx_HC(i)->HCINT = 0xFFFFFFFF;
+    USBx_HC(i)->HCINTMSK = 0;
+  }
+
+  /* Enable VBUS driving */
+  USB_DriveVbus(USBx, 1);
+
+  HAL_Delay(200);
+
+  /* Disable all interrupts. */
+  USBx->GINTMSK = 0;
+
+  /* Clear any pending interrupts */
+  USBx->GINTSTS = 0xFFFFFFFF;
+
+  if(USBx == USB_OTG_FS)
+  {
+    /* set Rx FIFO size */
+    USBx->GRXFSIZ  = (uint32_t )0x80;
+    USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x60 << 16)& USB_OTG_NPTXFD) | 0x80);
+    USBx->HPTXFSIZ = (uint32_t )(((0x40 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0);
+  }
+  else
+  {
+    /* set Rx FIFO size */
+    USBx->GRXFSIZ  = (uint32_t )0x200;
+    USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x100 << 16)& USB_OTG_NPTXFD) | 0x200);
+    USBx->HPTXFSIZ = (uint32_t )(((0xE0 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0x300);
+  }
+
+  /* Enable the common interrupts */
+  if (cfg.dma_enable == DISABLE)
+  {
+    USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
+  }
+
+  /* Enable interrupts matching to the Host mode ONLY */
+  USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM            | USB_OTG_GINTMSK_HCIM |\
+                    USB_OTG_GINTMSK_SOFM             |USB_OTG_GINTSTS_DISCINT|\
+                    USB_OTG_GINTMSK_PXFRM_IISOOXFRM  | USB_OTG_GINTMSK_WUIM);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the
+  *         HCFG register on the PHY type and set the right frame interval
+  * @param  USBx : Selected device
+  * @param  freq : clock frequency
+  *          This parameter can be one of these values:
+  *           HCFG_48_MHZ : Full Speed 48 MHz Clock
+  *           HCFG_6_MHZ : Low Speed 6 MHz Clock
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq)
+{
+  USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS);
+  USBx_HOST->HCFG |= (freq & USB_OTG_HCFG_FSLSPCS);
+
+  if (freq ==  HCFG_48_MHZ)
+  {
+    USBx_HOST->HFIR = (uint32_t)48000;
+  }
+  else if (freq ==  HCFG_6_MHZ)
+  {
+    USBx_HOST->HFIR = (uint32_t)6000;
+  }
+  return HAL_OK;
+}
+
+/**
+* @brief  USB_OTG_ResetPort : Reset Host Port
+  * @param  USBx : Selected device
+  * @retval HAL status
+  * @note   (1)The application must wait at least 10 ms
+  *   before clearing the reset bit.
+  */
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx)
+{
+  __IO uint32_t hprt0;
+
+  hprt0 = USBx_HPRT0;
+
+  hprt0 &= ~(USB_OTG_HPRT_PENA    | USB_OTG_HPRT_PCDET |\
+    USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+  USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0);
+  HAL_Delay (10);                                /* See Note #1 */
+  USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0);
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_DriveVbus : activate or de-activate vbus
+  * @param  state : VBUS state
+  *          This parameter can be one of these values:
+  *           0 : VBUS Active
+  *           1 : VBUS Inactive
+  * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state)
+{
+  __IO uint32_t hprt0;
+
+  hprt0 = USBx_HPRT0;
+  hprt0 &= ~(USB_OTG_HPRT_PENA    | USB_OTG_HPRT_PCDET |\
+                         USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+  if (((hprt0 & USB_OTG_HPRT_PPWR) == 0 ) && (state == 1 ))
+  {
+    USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0);
+  }
+  if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0 ))
+  {
+    USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0);
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Return Host Core speed
+  * @param  USBx : Selected device
+  * @retval speed : Host speed
+  *          This parameter can be one of these values:
+  *            @arg USB_OTG_SPEED_HIGH: High speed mode
+  *            @arg USB_OTG_SPEED_FULL: Full speed mode
+  *            @arg USB_OTG_SPEED_LOW: Low speed mode
+  */
+uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx)
+{
+  __IO uint32_t hprt0;
+
+  hprt0 = USBx_HPRT0;
+  return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17);
+}
+
+/**
+  * @brief  Return Host Current Frame number
+  * @param  USBx : Selected device
+  * @retval current frame number
+*/
+uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx)
+{
+  return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM);
+}
+
+/**
+  * @brief  Initialize a host channel
+  * @param  USBx : Selected device
+  * @param  ch_num : Channel number
+  *         This parameter can be a value from 1 to 15
+  * @param  epnum : Endpoint number
+  *          This parameter can be a value from 1 to 15
+  * @param  dev_address : Current device address
+  *          This parameter can be a value from 0 to 255
+  * @param  speed : Current device speed
+  *          This parameter can be one of these values:
+  *            @arg USB_OTG_SPEED_HIGH: High speed mode
+  *            @arg USB_OTG_SPEED_FULL: Full speed mode
+  *            @arg USB_OTG_SPEED_LOW: Low speed mode
+  * @param  ep_type : Endpoint Type
+  *          This parameter can be one of these values:
+  *            @arg EP_TYPE_CTRL: Control type
+  *            @arg EP_TYPE_ISOC: Isochronous type
+  *            @arg EP_TYPE_BULK: Bulk type
+  *            @arg EP_TYPE_INTR: Interrupt type
+  * @param  mps : Max Packet Size
+  *          This parameter can be a value from 0 to32K
+  * @retval HAL state
+  */
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+                              uint8_t ch_num,
+                              uint8_t epnum,
+                              uint8_t dev_address,
+                              uint8_t speed,
+                              uint8_t ep_type,
+                              uint16_t mps)
+{
+
+  /* Clear old interrupt conditions for this host channel. */
+  USBx_HC(ch_num)->HCINT = 0xFFFFFFFF;
+
+  /* Enable channel interrupts required for this transfer. */
+  switch (ep_type)
+  {
+  case EP_TYPE_CTRL:
+  case EP_TYPE_BULK:
+
+    USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM  |\
+                                USB_OTG_HCINTMSK_STALLM |\
+                                USB_OTG_HCINTMSK_TXERRM |\
+                                USB_OTG_HCINTMSK_DTERRM |\
+                                USB_OTG_HCINTMSK_AHBERR |\
+                                USB_OTG_HCINTMSK_NAKM ;
+
+    if (epnum & 0x80)
+    {
+      USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
+    }
+    else
+    {
+      if(USBx != USB_OTG_FS)
+      {
+        USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
+      }
+    }
+    break;
+
+  case EP_TYPE_INTR:
+
+    USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM  |\
+                                USB_OTG_HCINTMSK_STALLM |\
+                                USB_OTG_HCINTMSK_TXERRM |\
+                                USB_OTG_HCINTMSK_DTERRM |\
+                                USB_OTG_HCINTMSK_NAKM   |\
+                                USB_OTG_HCINTMSK_AHBERR |\
+                                USB_OTG_HCINTMSK_FRMORM ;
+
+    if (epnum & 0x80)
+    {
+      USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
+    }
+
+    break;
+  case EP_TYPE_ISOC:
+
+    USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM  |\
+                                USB_OTG_HCINTMSK_ACKM   |\
+                                USB_OTG_HCINTMSK_AHBERR |\
+                                USB_OTG_HCINTMSK_FRMORM ;
+
+    if (epnum & 0x80)
+    {
+      USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM);
+    }
+    break;
+  }
+
+  /* Enable the top level host channel interrupt. */
+  USBx_HOST->HAINTMSK |= (1 << ch_num);
+
+  /* Make sure host channel interrupts are enabled. */
+  USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM;
+
+  /* Program the HCCHAR register */
+  USBx_HC(ch_num)->HCCHAR = (((dev_address << 22) & USB_OTG_HCCHAR_DAD)  |\
+                             (((epnum & 0x7F)<< 11) & USB_OTG_HCCHAR_EPNUM)|\
+                             ((((epnum & 0x80) == 0x80)<< 15) & USB_OTG_HCCHAR_EPDIR)|\
+                             (((speed == HPRT0_PRTSPD_LOW_SPEED)<< 17) & USB_OTG_HCCHAR_LSDEV)|\
+                             ((ep_type << 18) & USB_OTG_HCCHAR_EPTYP)|\
+                             (mps & USB_OTG_HCCHAR_MPSIZ));
+
+  if (ep_type == EP_TYPE_INTR)
+  {
+    USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Start a transfer over a host channel
+  * @param  USBx : Selected device
+  * @param  hc : pointer to host channel structure
+  * @param  dma: USB dma enabled or disabled
+  *          This parameter can be one of these values:
+  *           0 : DMA feature not used
+  *           1 : DMA feature used
+  * @retval HAL state
+  */
+#if defined   (__CC_ARM) /*!< ARM Compiler */
+#pragma O0
+#elif defined (__GNUC__) /*!< GNU Compiler */
+#pragma GCC optimize ("O0")
+#endif /* __CC_ARM */
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma)
+{
+  uint8_t  is_oddframe = 0;
+  uint16_t len_words = 0;
+  uint16_t num_packets = 0;
+  uint16_t max_hc_pkt_count = 256;
+  uint32_t tmpreg = 0;
+
+  if((USBx != USB_OTG_FS) && (hc->speed == USB_OTG_SPEED_HIGH))
+  {
+    if((dma == 0) && (hc->do_ping == 1))
+    {
+      USB_DoPing(USBx, hc->ch_num);
+      return HAL_OK;
+    }
+    else if(dma == 1)
+    {
+      USBx_HC(hc->ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
+      hc->do_ping = 0;
+    }
+  }
+
+  /* Compute the expected number of packets associated to the transfer */
+  if (hc->xfer_len > 0)
+  {
+    num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
+
+    if (num_packets > max_hc_pkt_count)
+    {
+      num_packets = max_hc_pkt_count;
+      hc->xfer_len = num_packets * hc->max_packet;
+    }
+  }
+  else
+  {
+    num_packets = 1;
+  }
+  if (hc->ep_is_in)
+  {
+    hc->xfer_len = num_packets * hc->max_packet;
+  }
+
+  /* Initialize the HCTSIZn register */
+  USBx_HC(hc->ch_num)->HCTSIZ = (((hc->xfer_len) & USB_OTG_HCTSIZ_XFRSIZ)) |\
+    ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\
+      (((hc->data_pid) << 29) & USB_OTG_HCTSIZ_DPID);
+
+  if (dma)
+  {
+    /* xfer_buff MUST be 32-bits aligned */
+    USBx_HC(hc->ch_num)->HCDMA = (uint32_t)hc->xfer_buff;
+  }
+
+  is_oddframe = (USBx_HOST->HFNUM & 0x01) ? 0 : 1;
+  USBx_HC(hc->ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM;
+  USBx_HC(hc->ch_num)->HCCHAR |= (is_oddframe << 29);
+
+  /* Set host channel enable */
+  tmpreg = USBx_HC(hc->ch_num)->HCCHAR;
+  tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+  tmpreg |= USB_OTG_HCCHAR_CHENA;
+  USBx_HC(hc->ch_num)->HCCHAR = tmpreg;
+
+  if (dma == 0) /* Slave mode */
+  {
+    if((hc->ep_is_in == 0) && (hc->xfer_len > 0))
+    {
+      switch(hc->ep_type)
+      {
+        /* Non periodic transfer */
+      case EP_TYPE_CTRL:
+      case EP_TYPE_BULK:
+
+        len_words = (hc->xfer_len + 3) / 4;
+
+        /* check if there is enough space in FIFO space */
+        if(len_words > (USBx->HNPTXSTS & 0xFFFF))
+        {
+          /* need to process data in nptxfempty interrupt */
+          USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM;
+        }
+        break;
+        /* Periodic transfer */
+      case EP_TYPE_INTR:
+      case EP_TYPE_ISOC:
+        len_words = (hc->xfer_len + 3) / 4;
+        /* check if there is enough space in FIFO space */
+        if(len_words > (USBx_HOST->HPTXSTS & 0xFFFF)) /* split the transfer */
+        {
+          /* need to process data in ptxfempty interrupt */
+          USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM;
+        }
+        break;
+
+      default:
+        break;
+      }
+
+      /* Write packet into the Tx FIFO. */
+      USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, hc->xfer_len, 0);
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Read all host channel interrupts status
+  * @param  USBx : Selected device
+  * @retval HAL state
+  */
+uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+  return ((USBx_HOST->HAINT) & 0xFFFF);
+}
+
+/**
+  * @brief  Halt a host channel
+  * @param  USBx : Selected device
+  * @param  hc_num : Host Channel number
+  *         This parameter can be a value from 1 to 15
+  * @retval HAL state
+  */
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num)
+{
+  uint32_t count = 0;
+
+  /* Check for space in the request queue to issue the halt. */
+  if (((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_CTRL << 18)) || ((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_BULK << 18)))
+  {
+    USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
+
+    if ((USBx->HNPTXSTS & 0xFFFF) == 0)
+    {
+      USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+      USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+      USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
+      do
+      {
+        if (++count > 1000)
+        {
+          break;
+        }
+      }
+      while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+    }
+    else
+    {
+      USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+    }
+  }
+  else
+  {
+    USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
+
+    if ((USBx_HOST->HPTXSTS & 0xFFFF) == 0)
+    {
+      USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+      USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+      USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
+      do
+      {
+        if (++count > 1000)
+        {
+          break;
+        }
+      }
+      while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+    }
+    else
+    {
+       USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initiate Do Ping protocol
+  * @param  USBx : Selected device
+  * @param  hc_num : Host Channel number
+  *         This parameter can be a value from 1 to 15
+  * @retval HAL state
+  */
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num)
+{
+  uint8_t  num_packets = 1;
+  uint32_t tmpreg = 0;
+
+  USBx_HC(ch_num)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\
+                                USB_OTG_HCTSIZ_DOPING;
+
+  /* Set host channel enable */
+  tmpreg = USBx_HC(ch_num)->HCCHAR;
+  tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+  tmpreg |= USB_OTG_HCCHAR_CHENA;
+  USBx_HC(ch_num)->HCCHAR = tmpreg;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop Host Core
+  * @param  USBx : Selected device
+  * @retval HAL state
+  */
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx)
+{
+  uint8_t i;
+  uint32_t count = 0;
+  uint32_t value;
+
+  USB_DisableGlobalInt(USBx);
+
+    /* Flush FIFO */
+  USB_FlushTxFifo(USBx, 0x10);
+  USB_FlushRxFifo(USBx);
+
+  /* Flush out any leftover queued requests. */
+  for (i = 0; i <= 15; i++)
+  {
+
+    value = USBx_HC(i)->HCCHAR ;
+    value |=  USB_OTG_HCCHAR_CHDIS;
+    value &= ~USB_OTG_HCCHAR_CHENA;
+    value &= ~USB_OTG_HCCHAR_EPDIR;
+    USBx_HC(i)->HCCHAR = value;
+  }
+
+  /* Halt all channels to put them into a known state. */
+  for (i = 0; i <= 15; i++)
+  {
+    value = USBx_HC(i)->HCCHAR ;
+
+    value |= USB_OTG_HCCHAR_CHDIS;
+    value |= USB_OTG_HCCHAR_CHENA;
+    value &= ~USB_OTG_HCCHAR_EPDIR;
+
+    USBx_HC(i)->HCCHAR = value;
+    do
+    {
+      if (++count > 1000)
+      {
+        break;
+      }
+    }
+    while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+  }
+
+  /* Clear any pending Host interrupts */
+  USBx_HOST->HAINT = 0xFFFFFFFF;
+  USBx->GINTSTS = 0xFFFFFFFF;
+  USB_EnableGlobalInt(USBx);
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..a1a3fad
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,82 @@
+PROJS = fmc-test led-test short-test uart-test
+
+# put your *.o targets here, make should handle the rest!
+SRCS = stm32f4xx_hal_msp.c stm32f4xx_it.c stm-fmc.c stm-init.c stm-uart.c
+
+TOPLEVEL=.
+
+# Location of the Libraries folder from the STM32F0xx Standard Peripheral Library
+STD_PERIPH_LIB ?= $(TOPLEVEL)/Drivers
+
+# Location of the linker scripts
+LDSCRIPT_INC ?= $(TOPLEVEL)/Device/ldscripts
+
+# MCU selection parameters
+#
+STDPERIPH_SETTINGS ?= -DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F429xx
+#
+# For the dev-bridge rev01 board, use stm32f429bitx.ld.
+MCU_LINKSCRIPT ?= stm32f429bitx.ld
+
+# add startup file to build
+#
+# For the dev-bridge rev01 board, use startup_stm32f429xx.s.
+SRCS += $(TOPLEVEL)/Device/startup_stm32f429xx.s
+SRCS += $(TOPLEVEL)/Device/system_stm32f4xx.c
+
+# that's it, no need to change anything below this line!
+
+###################################################
+
+CC=arm-none-eabi-gcc
+AS=arm-none-eabi-as
+OBJCOPY=arm-none-eabi-objcopy
+OBJDUMP=arm-none-eabi-objdump
+SIZE=arm-none-eabi-size
+
+CFLAGS  = -ggdb -O2 -Wall -Wextra -Warray-bounds
+CFLAGS += -mcpu=cortex-m4 -mthumb -mlittle-endian -mthumb-interwork
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
+CFLAGS += $(STDPERIPH_SETTINGS)
+CFLAGS += -ffunction-sections -fdata-sections
+CFLAGS += -Wl,--gc-sections
+
+###################################################
+
+vpath %.c src
+vpath %.a $(STD_PERIPH_LIB)
+
+CFLAGS += -I include -I $(STD_PERIPH_LIB) -I $(STD_PERIPH_LIB)/CMSIS/Device/ST/STM32F4xx/Include
+CFLAGS += -I $(STD_PERIPH_LIB)/CMSIS/Include -I $(STD_PERIPH_LIB)/STM32F4xx_HAL_Driver/Inc
+
+OBJS = $(patsubst %.s,%.o, $(patsubst %.c,%.o, $(SRCS)))
+
+###################################################
+
+.PHONY: lib proj
+
+all: lib proj
+
+lib:
+	$(MAKE) -C $(STD_PERIPH_LIB) STDPERIPH_SETTINGS="$(STDPERIPH_SETTINGS) -I $(PWD)/include"
+
+proj: $(PROJS:=.elf)
+
+%.elf: %.o $(OBJS)
+	$(CC) $(CFLAGS) $^ -o $@ -L$(STD_PERIPH_LIB) -lstmf4 -L$(LDSCRIPT_INC) -T$(MCU_LINKSCRIPT) -g -Wl,-Map=$*.map
+	$(OBJCOPY) -O ihex $*.elf $*.hex
+	$(OBJCOPY) -O binary $*.elf $*.bin
+	$(OBJDUMP) -St $*.elf >$*.lst
+	$(SIZE) $*.elf
+
+clean:
+	find ./ -name '*~' | xargs rm -f
+	rm -f $(OBJS)
+	rm -f *.elf
+	rm -f *.hex
+	rm -f *.bin
+	rm -f *.map
+	rm -f *.lst
+
+distclean: clean
+	$(MAKE) -C $(STD_PERIPH_LIB) clean
diff --git a/bin/debug b/bin/debug
new file mode 100755
index 0000000..f6ede81
--- /dev/null
+++ b/bin/debug
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+PROJ="${1?'project'}"
+
+GDB=arm-none-eabi-gdb
+
+$GDB -ex "target remote localhost:3333" -ex "set remote hardware-breakpoint-limit 6" -ex "set remote hardware-watchpoint-limit 4" $PROJ.elf
diff --git a/bin/flash-target b/bin/flash-target
new file mode 100755
index 0000000..cfb951f
--- /dev/null
+++ b/bin/flash-target
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+PROJ="${1?'project'}"
+
+OPENOCD=openocd
+
+# location of OpenOCD Board .cfg files (only used with 'make flash-target')
+#
+# This path is from Ubuntu 14.04.
+#
+OPENOCD_BOARD_DIR=/usr/share/openocd/scripts/board
+
+# Configuration (cfg) file containing programming directives for OpenOCD
+#
+# If you are using an STLINK v2.0 from an STM32 F4 DISCOVERY board,
+# set this variable to "stm32f4discovery.cfg".
+#
+# If you are using an STLINK v2.1 from an STM32 F4 NUCLEO board,
+# set this variable to "st_nucleo_f401re.cfg".
+#
+# If you are using something else, look for a matching configuration file in
+# the OPENOCD_BOARD_DIR directory.
+#
+#OPENOCD_PROC_FILE=stm32f4discovery.cfg
+OPENOCD_PROC_FILE=st_nucleo_f401re.cfg
+
+$OPENOCD -f $OPENOCD_BOARD_DIR/$OPENOCD_PROC_FILE -c "program $PROJ.elf verify reset"
diff --git a/fmc-test.c b/fmc-test.c
new file mode 100644
index 0000000..0e8ff39
--- /dev/null
+++ b/fmc-test.c
@@ -0,0 +1,240 @@
+//------------------------------------------------------------------------------
+// main.c
+//------------------------------------------------------------------------------
+
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+#include "stm32f4xx_hal.h"
+#include "stm-init.h"
+#include "stm-led.h"
+#include "stm-fmc.h"
+#include "stm-uart.h"
+
+//------------------------------------------------------------------------------
+// Defines
+//------------------------------------------------------------------------------
+
+
+//------------------------------------------------------------------------------
+// Macros
+//------------------------------------------------------------------------------
+
+
+//------------------------------------------------------------------------------
+// Variables
+//------------------------------------------------------------------------------
+RNG_HandleTypeDef rng_inst;
+
+// FT: "I changed some interesting-to-look-at-in-the-debugger values to be
+// volatile, so that my compiler wouldn't optimize/obscure them."
+
+volatile uint32_t data_diff = 0;
+volatile uint32_t addr_diff = 0;
+
+
+//------------------------------------------------------------------------------
+// Prototypes
+//------------------------------------------------------------------------------
+/* XXX move this to stm-rng.[ch] */
+static void MX_RNG_Init(void);
+
+int test_fpga_data_bus(void);
+int test_fpga_address_bus(void);
+
+
+//------------------------------------------------------------------------------
+// Defines
+//------------------------------------------------------------------------------
+#define TEST_NUM_ROUNDS		100000
+
+
+//------------------------------------------------------------------------------
+int main(void)
+//------------------------------------------------------------------------------
+{
+  int i;
+  
+  stm_init();
+
+  uart_send_string("Keep calm for Novena boot...\r\n");
+
+  // Blink blue LED for six seconds to not upset the Novena at boot.
+  led_on(LED_BLUE);
+  for (i = 0; i < 12; i++) {
+    HAL_Delay(500);
+    led_toggle(LED_BLUE);
+  }
+
+  // initialize rng
+  MX_RNG_Init();
+
+  // prepare fmc interface
+  fmc_init();
+
+  // turn on green led, turn off other leds
+  led_on(LED_GREEN);
+  led_off(LED_YELLOW);
+  led_off(LED_RED);
+  led_off(LED_BLUE);
+
+  // vars
+  volatile int data_test_ok = 0, addr_test_ok = 0, successful_runs = 0, failed_runs = 0, sleep = 0;
+
+  // main loop (test, until an error is detected)
+  while (1)
+    {
+      // test data bus
+      data_test_ok = test_fpga_data_bus();
+      // test address bus
+      addr_test_ok = test_fpga_address_bus();
+
+      uart_send_string("Data: ");
+      uart_send_integer(data_test_ok, 100000);
+      uart_send_string(", addr: ");
+      uart_send_integer(addr_test_ok, 100000);
+      uart_send_string("\r\n");
+
+      if (data_test_ok == TEST_NUM_ROUNDS &&
+	  addr_test_ok == TEST_NUM_ROUNDS) {
+	// toggle yellow led to indicate, that we are alive
+	led_toggle(LED_YELLOW);
+
+	successful_runs++;
+	sleep = 100;
+      } else {
+	led_on(LED_RED);
+	failed_runs++;
+	sleep = 2000;
+      }
+
+      uart_send_string("Success ");
+      uart_send_integer(successful_runs, 0);
+      uart_send_string(", fail ");
+      uart_send_integer(failed_runs, 0);
+      uart_send_string("\r\n\r\n");
+
+      HAL_Delay(sleep);
+    }
+
+  // should never reach this line
+}
+
+
+//------------------------------------------------------------------------------
+int test_fpga_data_bus(void)
+//------------------------------------------------------------------------------
+{
+  int c, ok;
+  uint32_t rnd, buf;
+  HAL_StatusTypeDef hal_result;
+
+  // run some rounds of data bus test
+  for (c=0; c<TEST_NUM_ROUNDS; c++)
+    {
+      data_diff = 0;
+      // try to generate "random" number
+      hal_result = HAL_RNG_GenerateRandomNumber(&rng_inst, &rnd);
+      if (hal_result != HAL_OK) break;
+
+      // write value to fpga at address 0
+      ok = fmc_write_32(0, &rnd);
+      if (ok != 0) break;
+
+      // read value from fpga
+      ok = fmc_read_32(0, &buf);
+      if (ok != 0) break;
+
+      // compare (abort testing in case of error)
+      if (buf != rnd)
+	{
+	  data_diff = buf;
+	  data_diff ^= rnd;
+
+	  uart_send_string("Data bus fail: expected ");
+	  uart_send_binary(rnd, 32);
+	  uart_send_string(", got ");
+	  uart_send_binary(buf, 32);
+	  uart_send_string(", diff ");
+	  uart_send_binary(data_diff, 32);
+	  uart_send_string("\r\n");
+
+	  break;
+	}
+    }
+
+  // return number of successful tests
+  return c;
+}
+
+
+//------------------------------------------------------------------------------
+int test_fpga_address_bus(void)
+//------------------------------------------------------------------------------
+{
+  int c, ok;
+  uint32_t rnd, buf;
+  HAL_StatusTypeDef hal_result;
+
+  // run some rounds of address bus test
+  for (c=0; c<TEST_NUM_ROUNDS; c++)
+    {
+      addr_diff = 0;
+      // try to generate "random" number
+      hal_result = HAL_RNG_GenerateRandomNumber(&rng_inst, &rnd);
+      if (hal_result != HAL_OK) break;
+
+      // we only have 2^22 32-bit words
+      //rnd &= 0x00FFFFFC;
+      rnd &= 0x0007FFFC;
+
+      // don't test zero addresses (fpga will store data, not address)
+      if (rnd == 0) continue;
+
+      // write dummy value to fpga at some non-zero address
+      ok = fmc_write_32(rnd, &buf);
+      if (ok != 0) break;
+
+      // read value from fpga
+      ok = fmc_read_32(0, &buf);
+      if (ok != 0) break;
+
+      // fpga receives address of 32-bit word, while we need
+      // byte address here to compare
+      buf <<= 2;
+
+      // compare (abort testing in case of error)
+      if (buf != rnd)
+	{
+	  addr_diff = buf;
+	  addr_diff ^= rnd;
+
+	  uart_send_string("Addr bus fail: expected ");
+	  uart_send_binary(rnd, 32);
+	  uart_send_string(", got ");
+	  uart_send_binary(buf, 32);
+	  uart_send_string(", diff ");
+	  uart_send_binary(addr_diff, 32);
+	  uart_send_string("\r\n");
+
+	  break;
+	}
+    }
+
+  return c;
+}
+
+
+//------------------------------------------------------------------------------
+static void MX_RNG_Init(void)
+//------------------------------------------------------------------------------
+{
+  rng_inst.Instance = RNG;
+  HAL_RNG_Init(&rng_inst);
+}
+
+
+//------------------------------------------------------------------------------
+// EOF
+//------------------------------------------------------------------------------
diff --git a/include/stm-fmc.h b/include/stm-fmc.h
new file mode 100644
index 0000000..196d65e
--- /dev/null
+++ b/include/stm-fmc.h
@@ -0,0 +1,23 @@
+//------------------------------------------------------------------------------
+// stm-fmc.h
+//------------------------------------------------------------------------------
+
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+#include "stm32f4xx_hal.h"
+
+
+//------------------------------------------------------------------------------
+// Prototypes
+//------------------------------------------------------------------------------
+void fmc_init(void);
+
+int fmc_write_32(uint32_t addr, uint32_t *data);
+int fmc_read_32(uint32_t addr, uint32_t *data);
+
+
+//------------------------------------------------------------------------------
+// EOF
+//------------------------------------------------------------------------------
diff --git a/include/stm-init.h b/include/stm-init.h
new file mode 100644
index 0000000..fdf7dd0
--- /dev/null
+++ b/include/stm-init.h
@@ -0,0 +1,9 @@
+#ifndef __STM_INIT_H
+#define __STM_INIT_H
+
+#include "stm32f4xx_hal.h"
+
+extern void stm_init(void);
+extern void Error_Handler(void);
+
+#endif /* __STM_INIT_H */
diff --git a/include/stm-led.h b/include/stm-led.h
new file mode 100644
index 0000000..bd2a1e3
--- /dev/null
+++ b/include/stm-led.h
@@ -0,0 +1,16 @@
+#ifndef __STM_LED_H
+#define __STM_LED_H
+
+#include "stm32f4xx_hal.h"
+
+#define LED_PORT        GPIOJ
+#define LED_RED         GPIO_PIN_1
+#define LED_YELLOW      GPIO_PIN_2
+#define LED_GREEN       GPIO_PIN_3
+#define LED_BLUE        GPIO_PIN_4
+
+#define led_on(pin)     HAL_GPIO_WritePin(LED_PORT,pin,SET)
+#define led_off(pin)    HAL_GPIO_WritePin(LED_PORT,pin,RESET)
+#define led_toggle(pin) HAL_GPIO_TogglePin(LED_PORT,pin)
+
+#endif /* __STM_LED_H */
diff --git a/include/stm-uart.h b/include/stm-uart.h
new file mode 100644
index 0000000..43df882
--- /dev/null
+++ b/include/stm-uart.h
@@ -0,0 +1,18 @@
+#ifndef __STM32_DEV_BRIDGE_UART_H
+#define __STM32_DEV_BRIDGE_UART_H
+
+#include "stm32f4xx_hal.h"
+
+#define USART2_BAUD_RATE	115200
+
+#if 0 /* XXX moved [back] to stm-init.c */
+extern void MX_USART2_UART_Init(void);
+#endif
+
+extern void uart_send_binary(uint32_t num, uint8_t bits);
+extern void uart_send_string(char *s);
+extern void uart_send_integer(uint32_t data, uint32_t mag);
+
+extern UART_HandleTypeDef huart2;
+
+#endif /* __STM32_DEV_BRIDGE_UART_H */
diff --git a/include/stm32f4xx_hal_conf.h b/include/stm32f4xx_hal_conf.h
new file mode 100644
index 0000000..fd13d9e
--- /dev/null
+++ b/include/stm32f4xx_hal_conf.h
@@ -0,0 +1,423 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_conf.h
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+
+//#define HAL_ADC_MODULE_ENABLED
+//#define HAL_CAN_MODULE_ENABLED
+//#define HAL_CRC_MODULE_ENABLED
+//#define HAL_CRYP_MODULE_ENABLED
+//#define HAL_DAC_MODULE_ENABLED
+//#define HAL_DCMI_MODULE_ENABLED
+//#define HAL_DMA2D_MODULE_ENABLED
+//#define HAL_ETH_MODULE_ENABLED
+//#define HAL_NAND_MODULE_ENABLED
+//#define HAL_NOR_MODULE_ENABLED
+//#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+//#define HAL_SDRAM_MODULE_ENABLED
+//#define HAL_HASH_MODULE_ENABLED
+//#define HAL_I2C_MODULE_ENABLED
+//#define HAL_I2S_MODULE_ENABLED
+//#define HAL_IWDG_MODULE_ENABLED
+//#define HAL_LTDC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+//#define HAL_RTC_MODULE_ENABLED
+//#define HAL_SAI_MODULE_ENABLED
+//#define HAL_SD_MODULE_ENABLED
+//#define HAL_SPI_MODULE_ENABLED
+//#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+//#define HAL_USART_MODULE_ENABLED
+//#define HAL_IRDA_MODULE_ENABLED
+//#define HAL_SMARTCARD_MODULE_ENABLED
+//#define HAL_WWDG_MODULE_ENABLED
+//#define HAL_PCD_MODULE_ENABLED
+//#define HAL_HCD_MODULE_ENABLED
+//#define HAL_QSPI_MODULE_ENABLED
+//#define HAL_QSPI_MODULE_ENABLED
+//#define HAL_CEC_MODULE_ENABLED
+//#define HAL_FMPI2C_MODULE_ENABLED
+//#define HAL_SPDIFRX_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE  ((uint32_t)32000)
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000) /*!< Value of the External audio frequency in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+
+#define  VDD_VALUE					  ((uint32_t)3300) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)0)   /*!< tick interrupt priority */
+#define  USE_RTOS                     0
+#define  PREFETCH_ENABLE              1
+#define  INSTRUCTION_CACHE_ENABLE     1
+#define  DATA_CACHE_ENABLE            1
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1 */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2
+#define MAC_ADDR1   0
+#define MAC_ADDR2   0
+#define MAC_ADDR3   0
+#define MAC_ADDR4   0
+#define MAC_ADDR5   0
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    ((uint32_t)4)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    ((uint32_t)4)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS             0x01
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 ((uint32_t)0x000000FF)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
+
+#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
+#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x10)    /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x11)    /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x12)    /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/include/stm32f4xx_it.h b/include/stm32f4xx_it.h
new file mode 100644
index 0000000..546d79c
--- /dev/null
+++ b/include/stm32f4xx_it.h
@@ -0,0 +1,56 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  *
+  * COPYRIGHT(c) 2015 STMicroelectronics
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_IT_H
+#define __STM32F4xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/led-test.c b/led-test.c
new file mode 100644
index 0000000..5e4401f
--- /dev/null
+++ b/led-test.c
@@ -0,0 +1,33 @@
+/*
+ * Blink the four LEDs on the rev01 board in a pattern.
+ */
+#include "stm32f4xx_hal.h"
+#include "stm-init.h"
+#include "stm-led.h"
+
+#define DELAY() HAL_Delay(125)
+
+void toggle_led(uint32_t times, uint32_t led_pin)
+{
+  uint32_t i;
+
+  for (i = 0; i < times; i++) {
+    HAL_GPIO_TogglePin(LED_PORT, led_pin);
+    DELAY();
+  }
+}
+
+int
+main()
+{
+  stm_init();
+
+  while (1)
+  {
+    toggle_led(2, LED_BLUE);
+    toggle_led(2, LED_GREEN);
+    toggle_led(2, LED_YELLOW);
+    toggle_led(2, LED_RED);
+  }
+
+}
diff --git a/libc/printf.c b/libc/printf.c
new file mode 100644
index 0000000..78f210a
--- /dev/null
+++ b/libc/printf.c
@@ -0,0 +1,412 @@
+/*****************************************************************************
+Stripped-down printf()
+Chris Giese <geezer at execpc.com>	http://my.execpc.com/~geezer
+Release date: Dec 12, 2003
+This code is public domain (no copyright).
+You can do whatever you want with it.
+
+Revised Dec 12, 2003
+- fixed vsprintf() and sprintf() in test code
+
+Revised Jan 28, 2002
+- changes to make characters 0x80-0xFF display properly
+
+Revised June 10, 2001
+- changes to make vsprintf() terminate string with '\0'
+
+Revised May 12, 2000
+- math in DO_NUM is now unsigned, as it should be
+- %0 flag (pad left with zeroes) now works
+- actually did some TESTING, maybe fixed some other bugs
+
+%[flag][width][.prec][mod][conv]
+flag:	-	left justify, pad right w/ blanks	DONE
+	0	pad left w/ 0 for numerics		DONE
+	+	always print sign, + or -		no
+	' '	(blank)					no
+	#	(???)					no
+
+width:		(field width)				DONE
+
+prec:		(precision)				no
+
+conv:	d,i	decimal int				DONE
+	u	decimal unsigned			DONE
+	o	octal					DONE
+	x,X	hex					DONE
+	f,e,g,E,G float					no
+	c	char					DONE
+	s	string					DONE
+	p	ptr					DONE
+
+mod:	N	near ptr				DONE
+	F	far ptr					no
+	h	short (16-bit) int			DONE
+	l	long (32-bit) int			DONE
+	L	long long (64-bit) int			no
+*****************************************************************************/
+#include <string.h> /* strlen() */
+#include <stdio.h> /* stdout, putchar(), fputs() (but not printf() :) */
+
+#if 1
+#include <stdarg.h> /* va_list, va_start(), va_arg(), va_end() */
+#else
+/* home-brew STDARG.H, also public-domain: */
+
+/* Assume: width of stack == width of int. Don't use sizeof(char *) or
+other pointer because sizeof(char *)==4 for LARGE-model 16-bit code.
+Assume: width is a power of 2 */
+#define	STACK_WIDTH	sizeof(int)
+
+/* Round up object width so it's an even multiple of STACK_WIDTH.
+Using & for division here, so STACK_WIDTH must be a power of 2. */
+#define	TYPE_WIDTH(TYPE)				\
+	((sizeof(TYPE) + STACK_WIDTH - 1) & ~(STACK_WIDTH - 1))
+
+/* point the va_list pointer to LASTARG,
+then advance beyond it to the first variable arg */
+#define	va_start(PTR, LASTARG)				\
+	PTR = (va_list)((char *)&(LASTARG) + TYPE_WIDTH(LASTARG))
+
+#define va_end(PTR)	/* nothing */
+
+/* Increment the va_list pointer, then return
+(evaluate to, actually) the previous value of the pointer.
+WHEEE! At last; a valid use for the C comma operator! */
+#define va_arg(PTR, TYPE)	(			\
+	(char *)(PTR) += TYPE_WIDTH(TYPE)		\
+				,			\
+	*((TYPE *)((char *)(PTR) - TYPE_WIDTH(TYPE)))	\
+				)
+/* Every other compiler/libc seems to be using 'void *', so...
+(I _was_ using 'unsigned char *') */
+typedef void *va_list;
+
+#endif
+
+/* flags used in processing format string */
+#define	PR_LJ	0x01	/* left justify */
+#define	PR_CA	0x02	/* use A-F instead of a-f for hex */
+#define	PR_SG	0x04	/* signed numeric conversion (%d vs. %u) */
+#define	PR_32	0x08	/* long (32-bit) numeric conversion */
+#define	PR_16	0x10	/* short (16-bit) numeric conversion */
+#define	PR_WS	0x20	/* PR_SG set and num was < 0 */
+#define	PR_LZ	0x40	/* pad left with '0' instead of ' ' */
+#define	PR_FP	0x80	/* pointers are far */
+#if 0
+/* largest number handled is 2^32-1, lowest radix handled is 8.
+2^32-1 in base 8 has 11 digits (add 5 for trailing NUL and for slop) */
+#define	PR_BUFLEN	16
+#else
+/* largest number handled is 2^64-1, lowest radix handled is 8.
+2^64-1 in base 8 has 22 digits (add 2 for trailing NUL and for slop) */
+#define	PR_BUFLEN	24
+#endif
+
+typedef int (*fnptr_t)(unsigned c, void **helper);
+/*****************************************************************************
+name:	do_printf
+action:	minimal subfunction for ?printf, calls function
+	'fn' with arg 'ptr' for each character to be output
+returns:total number of characters output
+*****************************************************************************/
+int do_printf(const char *fmt, va_list args, fnptr_t fn, void *ptr)
+{
+	unsigned flags, actual_wd, count, given_wd;
+	unsigned char *where, buf[PR_BUFLEN];
+	unsigned char state, radix;
+	long num;
+
+	state = flags = count = given_wd = 0;
+/* begin scanning format specifier list */
+	for(; *fmt; fmt++)
+	{
+		switch(state)
+		{
+/* STATE 0: AWAITING % */
+		case 0:
+			if(*fmt != '%')	/* not %... */
+			{
+				fn(*fmt, &ptr);	/* ...just echo it */
+				count++;
+				break;
+			}
+/* found %, get next char and advance state to check if next char is a flag */
+			state++;
+			fmt++;
+			/* FALL THROUGH */
+/* STATE 1: AWAITING FLAGS (%-0) */
+		case 1:
+			if(*fmt == '%')	/* %% */
+			{
+				fn(*fmt, &ptr);
+				count++;
+				state = flags = given_wd = 0;
+				break;
+			}
+			if(*fmt == '-')
+			{
+				if(flags & PR_LJ)/* %-- is illegal */
+					state = flags = given_wd = 0;
+				else
+					flags |= PR_LJ;
+				break;
+			}
+/* not a flag char: advance state to check if it's field width */
+			state++;
+/* check now for '%0...' */
+			if(*fmt == '0')
+			{
+				flags |= PR_LZ;
+				fmt++;
+			}
+			/* FALL THROUGH */
+/* STATE 2: AWAITING (NUMERIC) FIELD WIDTH */
+		case 2:
+			if(*fmt >= '0' && *fmt <= '9')
+			{
+				given_wd = 10 * given_wd +
+					(*fmt - '0');
+				break;
+			}
+/* not field width: advance state to check if it's a modifier */
+			state++;
+			/* FALL THROUGH */
+/* STATE 3: AWAITING MODIFIER CHARS (FNlh) */
+		case 3:
+			if(*fmt == 'F')
+			{
+				flags |= PR_FP;
+				break;
+			}
+			if(*fmt == 'N')
+				break;
+			if(*fmt == 'l')
+			{
+				flags |= PR_32;
+				break;
+			}
+			if(*fmt == 'h')
+			{
+				flags |= PR_16;
+				break;
+			}
+/* not modifier: advance state to check if it's a conversion char */
+			state++;
+			/* FALL THROUGH */
+/* STATE 4: AWAITING CONVERSION CHARS (Xxpndiuocs) */
+		case 4:
+			where = buf + PR_BUFLEN - 1;
+			*where = '\0';
+			switch(*fmt)
+			{
+			case 'X':
+				flags |= PR_CA;
+				/* FALL THROUGH */
+/* xxx - far pointers (%Fp, %Fn) not yet supported */
+			case 'x':
+			case 'p':
+			case 'n':
+				radix = 16;
+				goto DO_NUM;
+			case 'd':
+			case 'i':
+				flags |= PR_SG;
+				/* FALL THROUGH */
+			case 'u':
+				radix = 10;
+				goto DO_NUM;
+			case 'o':
+				radix = 8;
+/* load the value to be printed. l=long=32 bits: */
+DO_NUM:				if(flags & PR_32)
+					num = va_arg(args, unsigned long);
+/* h=short=16 bits (signed or unsigned) */
+				else if(flags & PR_16)
+				{
+					if(flags & PR_SG)
+						num = va_arg(args, short);
+					else
+						num = va_arg(args, unsigned short);
+				}
+/* no h nor l: sizeof(int) bits (signed or unsigned) */
+				else
+				{
+					if(flags & PR_SG)
+						num = va_arg(args, int);
+					else
+						num = va_arg(args, unsigned int);
+				}
+/* take care of sign */
+				if(flags & PR_SG)
+				{
+					if(num < 0)
+					{
+						flags |= PR_WS;
+						num = -num;
+					}
+				}
+/* convert binary to octal/decimal/hex ASCII
+OK, I found my mistake. The math here is _always_ unsigned */
+				do
+				{
+					unsigned long temp;
+
+					temp = (unsigned long)num % radix;
+					where--;
+					if(temp < 10)
+						*where = temp + '0';
+					else if(flags & PR_CA)
+						*where = temp - 10 + 'A';
+					else
+						*where = temp - 10 + 'a';
+					num = (unsigned long)num / radix;
+				}
+				while(num != 0);
+				goto EMIT;
+			case 'c':
+/* disallow pad-left-with-zeroes for %c */
+				flags &= ~PR_LZ;
+				where--;
+				*where = (unsigned char)va_arg(args,
+					unsigned char);
+				actual_wd = 1;
+				goto EMIT2;
+			case 's':
+/* disallow pad-left-with-zeroes for %s */
+				flags &= ~PR_LZ;
+				where = va_arg(args, unsigned char *);
+EMIT:
+				actual_wd = strlen(where);
+				if(flags & PR_WS)
+					actual_wd++;
+/* if we pad left with ZEROES, do the sign now */
+				if((flags & (PR_WS | PR_LZ)) ==
+					(PR_WS | PR_LZ))
+				{
+					fn('-', &ptr);
+					count++;
+				}
+/* pad on left with spaces or zeroes (for right justify) */
+EMIT2:				if((flags & PR_LJ) == 0)
+				{
+					while(given_wd > actual_wd)
+					{
+						fn(flags & PR_LZ ?
+							'0' : ' ', &ptr);
+						count++;
+						given_wd--;
+					}
+				}
+/* if we pad left with SPACES, do the sign now */
+				if((flags & (PR_WS | PR_LZ)) == PR_WS)
+				{
+					fn('-', &ptr);
+					count++;
+				}
+/* emit string/char/converted number */
+				while(*where != '\0')
+				{
+					fn(*where++, &ptr);
+					count++;
+				}
+/* pad on right with spaces (for left justify) */
+				if(given_wd < actual_wd)
+					given_wd = 0;
+				else given_wd -= actual_wd;
+				for(; given_wd; given_wd--)
+				{
+					fn(' ', &ptr);
+					count++;
+				}
+				break;
+			default:
+				break;
+			}
+		default:
+			state = flags = given_wd = 0;
+			break;
+		}
+	}
+	return count;
+}
+#if 1 /* testing */
+/*****************************************************************************
+SPRINTF
+*****************************************************************************/
+static int vsprintf_help(unsigned c, void **ptr)
+{
+	char *dst;
+
+	dst = *ptr;
+	*dst++ = (char)c;
+	*ptr = dst;
+	return 0 ;
+}
+/*****************************************************************************
+*****************************************************************************/
+int vsprintf(char *buf, const char *fmt, va_list args)
+{
+	int rv;
+
+	rv = do_printf(fmt, args, vsprintf_help, (void *)buf);
+	buf[rv] = '\0';
+	return rv;
+}
+/*****************************************************************************
+*****************************************************************************/
+int sprintf(char *buf, const char *fmt, ...)
+{
+	va_list args;
+	int rv;
+
+	va_start(args, fmt);
+	rv = vsprintf(buf, fmt, args);
+	va_end(args);
+	return rv;
+}
+/*****************************************************************************
+PRINTF
+You must write your own putchar()
+*****************************************************************************/
+int vprintf_help(unsigned c, void **ptr)
+{
+	putchar(c);
+	return 0 ;
+}
+/*****************************************************************************
+*****************************************************************************/
+int vprintf(const char *fmt, va_list args)
+{
+	return do_printf(fmt, args, vprintf_help, NULL);
+}
+/*****************************************************************************
+*****************************************************************************/
+int printf(const char *fmt, ...)
+{
+	va_list args;
+	int rv;
+
+	va_start(args, fmt);
+	rv = vprintf(fmt, args);
+	va_end(args);
+	return rv;
+}
+#endif
+#if 0
+/*****************************************************************************
+*****************************************************************************/
+int main(void)
+{
+	char buf[64];
+
+	sprintf(buf, "%lu score and %i years ago...\n", 4L, -7);
+	fputs(buf, stdout); /* puts() adds newline */
+
+	sprintf(buf, "-1L == 0x%lX == octal %lo\n", -1L, -1L);
+	fputs(buf, stdout); /* puts() adds newline */
+
+	printf("<%-8s> and <%8s> justified strings\n", "left", "right");
+	return 0;
+}
+#endif
diff --git a/short-test.c b/short-test.c
new file mode 100644
index 0000000..6dd97f4
--- /dev/null
+++ b/short-test.c
@@ -0,0 +1,205 @@
+/*
+ * Test code that just sends the letters 'a' to 'z' over and
+ * over again using USART2.
+ *
+ * Toggles the BLUE LED slowly and the RED LED for every
+ * character sent.
+ */
+#include "stm32f4xx_hal.h"
+#include "stm-init.h"
+#include "stm-led.h"
+#include "stm-uart.h"
+
+void test_for_shorts(char port, GPIO_TypeDef* GPIOx, uint16_t GPIO_Test_Pins);
+
+//------------------------------------------------------------------------------
+// Defines
+//------------------------------------------------------------------------------
+
+
+//------------------------------------------------------------------------------
+// Macros
+//------------------------------------------------------------------------------
+
+/* These are all the pins used by the FMC interface */
+#define GPIOB_PINS  (GPIO_PIN_7)
+
+#define GPIOD_PINS  (GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11	\
+		     |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15	\
+		     |GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_3|GPIO_PIN_4	\
+		     |GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7)
+
+#define GPIOE_PINS  (GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_7	\
+		     |GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11	\
+		     |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15)
+
+#define GPIOF_PINS  (GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3	\
+		     |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13	\
+		     |GPIO_PIN_14|GPIO_PIN_15)
+
+#define GPIOG_PINS  (GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3	\
+		     |GPIO_PIN_4|GPIO_PIN_5)
+
+#define GPIOH_PINS  (GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11	\
+		     |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15)
+
+#define GPIOI_PINS  (GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1	\
+		     |GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_6|GPIO_PIN_7)
+
+int
+main()
+{
+  stm_init();
+
+  // enable gpio clocks
+  __GPIOA_CLK_ENABLE();
+  __GPIOB_CLK_ENABLE();
+  __GPIOD_CLK_ENABLE();
+  __GPIOE_CLK_ENABLE();
+  __GPIOF_CLK_ENABLE();
+  __GPIOG_CLK_ENABLE();
+  __GPIOH_CLK_ENABLE();
+  __GPIOI_CLK_ENABLE();
+
+  while (1) {
+    HAL_GPIO_TogglePin(LED_PORT, LED_GREEN);
+    HAL_UART_Transmit(&huart2, (uint8_t *) "\r\n\r\n\r\n\r\n\r\n", 10, 0x1);
+
+    test_for_shorts('B', GPIOB, GPIOB_PINS);
+    test_for_shorts('D', GPIOD, GPIOD_PINS);
+    test_for_shorts('E', GPIOE, GPIOE_PINS);
+    test_for_shorts('F', GPIOF, GPIOF_PINS);
+    test_for_shorts('G', GPIOG, GPIOG_PINS);
+    test_for_shorts('H', GPIOH, GPIOH_PINS);
+    test_for_shorts('I', GPIOI, GPIOI_PINS);
+    led_toggle(LED_BLUE);
+    HAL_Delay(2000);
+  }
+}
+
+void configure_all_as_input(GPIO_TypeDef* GPIOx, uint16_t GPIO_Test_Pins)
+{
+  GPIO_InitTypeDef GPIO_InitStruct;
+
+  /* Configure all pins as input. XXX do all pins (0xffff) instead of just GPIO_Test_Pins? */
+  GPIO_InitStruct.Pin = GPIO_Test_Pins;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_PULLDOWN;
+  GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
+  HAL_GPIO_Init(GPIOx, &GPIO_InitStruct);
+}
+
+uint8_t check_no_input(char port, GPIO_TypeDef* GPIOx, uint16_t GPIO_Test_Pins, char wrote_port, uint16_t wrote_value)
+{
+  uint16_t read;
+
+  /* Read all pins from port at once. XXX check all pins, not just GPIO_Test_Pins? */
+  read = (GPIOx->IDR & GPIO_Test_Pins);
+
+  if (! read) {
+    /* No unexpected pins read as HIGH */
+    return 0;
+  }
+
+  led_on(LED_RED);
+
+  HAL_UART_Transmit(&huart2, (uint8_t *) "Wrote ", 6, 0x1);
+  uart_send_binary(wrote_value, 16);
+
+  HAL_UART_Transmit(&huart2, (uint8_t *) " to port GPIO", 13, 0x1);
+  HAL_UART_Transmit(&huart2, (uint8_t *) &wrote_port, 1, 0x1);
+
+  HAL_UART_Transmit(&huart2, (uint8_t *) ", read ", 7, 0x1);
+  uart_send_binary(read, 16);
+
+  HAL_UART_Transmit(&huart2, (uint8_t *) " from GPIO", 10, 0x1);
+  HAL_UART_Transmit(&huart2, (uint8_t *) &port, 1, 0x1);
+
+  HAL_UART_Transmit(&huart2, (uint8_t *) "\r\n", 2, 0x1);
+
+  return 1;
+}
+
+void test_for_shorts(char port, GPIO_TypeDef* GPIOx, uint16_t GPIO_Test_Pins)
+{
+  GPIO_InitTypeDef GPIO_InitStruct;
+  uint16_t i, fail = 0, Test_Pin, read;
+
+  configure_all_as_input(GPIOB, GPIOB_PINS);
+  configure_all_as_input(GPIOD, GPIOD_PINS);
+  configure_all_as_input(GPIOE, GPIOE_PINS);
+  configure_all_as_input(GPIOF, GPIOF_PINS);
+  configure_all_as_input(GPIOG, GPIOG_PINS);
+  configure_all_as_input(GPIOH, GPIOH_PINS);
+  configure_all_as_input(GPIOI, GPIOI_PINS);
+
+  check_no_input('B', GPIOB, GPIOB_PINS, 'x', 0);
+  check_no_input('D', GPIOD, GPIOD_PINS, 'x', 0);
+  check_no_input('E', GPIOE, GPIOE_PINS, 'x', 0);
+  check_no_input('F', GPIOF, GPIOF_PINS, 'x', 0);
+  check_no_input('G', GPIOG, GPIOG_PINS, 'x', 0);
+  check_no_input('H', GPIOH, GPIOH_PINS, 'x', 0);
+  check_no_input('I', GPIOI, GPIOI_PINS, 'x', 0);
+
+  for (i = 0; i < 31; i++) {
+    Test_Pin = 1 << i;
+    if (! (GPIO_Test_Pins & Test_Pin)) continue;
+
+    configure_all_as_input(GPIOx, GPIO_Test_Pins);
+
+    /* Change one pin to output */
+    GPIO_InitStruct.Pin = Test_Pin;
+    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+    GPIO_InitStruct.Pull = GPIO_PULLDOWN;
+    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
+    HAL_GPIO_Init(GPIOx, &GPIO_InitStruct);
+
+    HAL_GPIO_WritePin(GPIOx, Test_Pin, GPIO_PIN_SET);
+
+    /* Slight delay after setting the output pin. Without this, the Test_Pin
+       bit might read as zero, as it is only sampled once every AHB1 clock cycle.
+       Reference manual DM00031020 section 8.3.1.
+    */
+    HAL_Delay(1);
+
+    /* Read all input GPIOs from port at once. XXX check all pins, not just GPIO_Test_Pins? */
+    read = GPIOx->IDR & GPIO_Test_Pins;
+
+    if (read == Test_Pin) {
+      /* No unexpected pins read as HIGH */
+      led_toggle(LED_GREEN);
+    } else {
+      led_on(LED_RED);
+      HAL_UART_Transmit(&huart2, (uint8_t *) "GPIO", 4, 0x1);
+      HAL_UART_Transmit(&huart2, (uint8_t *) &port, 1, 0x1);
+
+      HAL_UART_Transmit(&huart2, (uint8_t *) " exp ", 5, 0x1);
+      uart_send_binary(Test_Pin, 16);
+
+      HAL_UART_Transmit(&huart2, (uint8_t *) " got ", 5, 0x1);
+      uart_send_binary(read, 16);
+
+      HAL_UART_Transmit(&huart2, (uint8_t *) " diff ", 6, 0x1);
+      uart_send_binary(read ^ Test_Pin, 16);
+
+      HAL_UART_Transmit(&huart2, (uint8_t *) "\r\n", 2, 0x1);
+
+      fail++;
+    }
+
+    /* Check there is no input on any of the other GPIO ports (adjacent pins might live on different ports) */
+    if (port != 'B') fail += check_no_input('B', GPIOB, GPIOB_PINS, port, Test_Pin);
+    if (port != 'D') fail += check_no_input('D', GPIOD, GPIOD_PINS, port, Test_Pin);
+    if (port != 'E') fail += check_no_input('E', GPIOE, GPIOE_PINS, port, Test_Pin);
+    if (port != 'F') fail += check_no_input('F', GPIOF, GPIOF_PINS, port, Test_Pin);
+    if (port != 'G') fail += check_no_input('G', GPIOG, GPIOG_PINS, port, Test_Pin);
+    if (port != 'H') fail += check_no_input('H', GPIOH, GPIOH_PINS, port, Test_Pin);
+    if (port != 'I') fail += check_no_input('I', GPIOI, GPIOI_PINS, port, Test_Pin);
+
+    HAL_GPIO_WritePin(GPIOx, Test_Pin, GPIO_PIN_RESET);
+  }
+
+  if (fail) {
+    HAL_UART_Transmit(&huart2, (uint8_t *) "\r\n", 2, 0x1);
+  }
+}
diff --git a/src/stm-fmc.c b/src/stm-fmc.c
new file mode 100644
index 0000000..bc214d8
--- /dev/null
+++ b/src/stm-fmc.c
@@ -0,0 +1,324 @@
+//------------------------------------------------------------------------------
+// stm-fmc.c
+//------------------------------------------------------------------------------
+
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+#include "stm-fmc.h"
+
+
+//------------------------------------------------------------------------------
+// Defined Values
+//------------------------------------------------------------------------------
+#define FMC_FPGA_BASE_ADDR              0x60000000
+#define FMC_FPGA_ADDR_MASK              0x00FFFFFC
+#define FMC_FPGA_NWAIT_MAX_POLL_TICKS   10
+
+#define FMC_GPIO_PORT_NWAIT             GPIOD
+#define FMC_GPIO_PIN_NWAIT              GPIO_PIN_6
+
+#define FMC_NWAIT_IDLE                  GPIO_PIN_SET
+
+
+//------------------------------------------------------------------------------
+// Variables
+//------------------------------------------------------------------------------
+static SRAM_HandleTypeDef _fmc_fpga_inst;
+
+
+//------------------------------------------------------------------------------
+// Prototypes
+//------------------------------------------------------------------------------
+static void _fmc_init_gpio(void);
+static void _fmc_init_params(void);
+static int _fmc_nwait_idle(void);
+
+
+//------------------------------------------------------------------------------
+void fmc_init(void)
+//------------------------------------------------------------------------------
+{
+  // configure fmc pins
+  _fmc_init_gpio();
+
+  // configure fmc registers
+  _fmc_init_params();
+}
+
+
+//------------------------------------------------------------------------------
+int fmc_write_32(uint32_t addr, uint32_t *data)
+//------------------------------------------------------------------------------
+{
+  // calculate target fpga address
+  uint32_t ptr = FMC_FPGA_BASE_ADDR + (addr & FMC_FPGA_ADDR_MASK);
+
+  // write data to fpga
+  HAL_StatusTypeDef ok = HAL_SRAM_Write_32b(&_fmc_fpga_inst, (uint32_t *)ptr, data, 1);
+
+  // check for error
+  if (ok != HAL_OK) return -1;
+
+  // wait for transaction to complete
+  int wait = _fmc_nwait_idle();
+
+  // check for timeout
+  if (wait != 0) return -1;
+
+  // everything went ok
+  return 0;
+}
+
+
+//------------------------------------------------------------------------------
+int fmc_read_32(uint32_t addr, uint32_t *data)
+//------------------------------------------------------------------------------
+{
+  // calculate target fpga address
+  uint32_t ptr = FMC_FPGA_BASE_ADDR + (addr & FMC_FPGA_ADDR_MASK);
+
+  // perform dummy read transaction
+  HAL_StatusTypeDef ok = HAL_SRAM_Read_32b(&_fmc_fpga_inst, (uint32_t *)ptr, data, 1);
+
+  // check for error
+  if (ok != HAL_OK) return -1;
+
+  // wait for dummy transaction to complete
+  int wait = _fmc_nwait_idle();
+
+  // check for timeout
+  if (wait != 0) return -1;
+
+  // read data from fpga
+  ok = HAL_SRAM_Read_32b(&_fmc_fpga_inst, (uint32_t *)ptr, data, 1);
+
+  // check for error
+  if (ok != HAL_OK) return -1;
+
+  // wait for read transaction to complete
+  wait = _fmc_nwait_idle();
+
+  // check for timeout
+  if (wait != 0) return -1;
+
+  // everything went ok
+  return 0;
+}
+
+
+//------------------------------------------------------------------------------
+static int _fmc_nwait_idle()
+//------------------------------------------------------------------------------
+{
+  int cnt; // counter
+
+  // poll NWAIT (number of iterations is limited)
+  for (cnt=0; cnt<FMC_FPGA_NWAIT_MAX_POLL_TICKS; cnt++)
+    {
+      // read pin state
+      GPIO_PinState nwait = HAL_GPIO_ReadPin(FMC_GPIO_PORT_NWAIT, FMC_GPIO_PIN_NWAIT);
+
+      // stop waiting if fpga is ready
+      if (nwait == FMC_NWAIT_IDLE) break;
+    }
+
+  // check for timeout
+  if (cnt >= FMC_FPGA_NWAIT_MAX_POLL_TICKS) return -1;
+
+  // ok
+  return 0;
+}
+
+//------------------------------------------------------------------------------
+static void _fmc_init_gpio(void)
+//------------------------------------------------------------------------------
+{
+  // enable gpio clocks
+  __GPIOA_CLK_ENABLE();
+  __GPIOB_CLK_ENABLE();
+  __GPIOD_CLK_ENABLE();
+  __GPIOE_CLK_ENABLE();
+  __GPIOF_CLK_ENABLE();
+  __GPIOG_CLK_ENABLE();
+  __GPIOH_CLK_ENABLE();
+  __GPIOI_CLK_ENABLE();
+
+  // enable fmc clock
+  __FMC_CLK_ENABLE();
+
+  // structure
+  GPIO_InitTypeDef GPIO_InitStruct;
+
+  // Port B
+  GPIO_InitStruct.Pin = GPIO_PIN_7;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  // Port D
+  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
+    |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15
+    |GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_3|GPIO_PIN_4
+    |GPIO_PIN_5|GPIO_PIN_7;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
+  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+  /*
+   * When FMC is working with fixed latency, NWAIT pin must not be
+   * configured in AF mode, according to STM32F429 errata.
+   */
+
+  // Port D (GPIO!)
+  GPIO_InitStruct.Pin = GPIO_PIN_6;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+  // Port E
+  GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_7
+    |GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
+    |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
+  HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+
+  // Port F
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+    |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13
+    |GPIO_PIN_14|GPIO_PIN_15;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
+  HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
+
+  // Port G
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+    |GPIO_PIN_4|GPIO_PIN_5;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
+  HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
+
+  // Port H
+  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
+    |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
+  HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
+
+  // Port I
+  GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1
+    |GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_6|GPIO_PIN_7;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
+  HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
+}
+
+
+//------------------------------------------------------------------------------
+static void _fmc_init_params(void)
+//------------------------------------------------------------------------------
+{
+  /*
+   * fill internal fields
+   */
+  _fmc_fpga_inst.Instance = FMC_NORSRAM_DEVICE;
+  _fmc_fpga_inst.Extended = FMC_NORSRAM_EXTENDED_DEVICE;
+
+
+  /*
+   * configure fmc interface settings
+   */
+
+  // use the first bank and corresponding chip select
+  _fmc_fpga_inst.Init.NSBank = FMC_NORSRAM_BANK1;
+
+  // data and address buses are separate
+  _fmc_fpga_inst.Init.DataAddressMux = FMC_DATA_ADDRESS_MUX_DISABLE;
+
+  // fpga mimics psram-type memory
+  _fmc_fpga_inst.Init.MemoryType = FMC_MEMORY_TYPE_PSRAM;
+
+  // data bus is 32-bit
+  _fmc_fpga_inst.Init.MemoryDataWidth = FMC_NORSRAM_MEM_BUS_WIDTH_32;
+
+  // read transaction is sync
+  _fmc_fpga_inst.Init.BurstAccessMode = FMC_BURST_ACCESS_MODE_ENABLE;
+
+  // this _must_ be configured to high, according to errata, otherwise
+  // the processor may hang after trying to access fpga via fmc
+  _fmc_fpga_inst.Init.WaitSignalPolarity = FMC_WAIT_SIGNAL_POLARITY_HIGH;
+
+  // wrap mode is not supported
+  _fmc_fpga_inst.Init.WrapMode = FMC_WRAP_MODE_DISABLE;
+
+  // don't care in fixed latency mode
+  _fmc_fpga_inst.Init.WaitSignalActive = FMC_WAIT_TIMING_DURING_WS;
+
+  // allow write access to fpga
+  _fmc_fpga_inst.Init.WriteOperation = FMC_WRITE_OPERATION_ENABLE;
+
+  // use fixed latency mode (ignore wait signal)
+  _fmc_fpga_inst.Init.WaitSignal = FMC_WAIT_SIGNAL_DISABLE;
+
+  // write and read have same timing
+  _fmc_fpga_inst.Init.ExtendedMode = FMC_EXTENDED_MODE_DISABLE;
+
+  // don't care in sync mode
+  _fmc_fpga_inst.Init.AsynchronousWait = FMC_ASYNCHRONOUS_WAIT_DISABLE;
+
+  // write transaction is sync
+  _fmc_fpga_inst.Init.WriteBurst = FMC_WRITE_BURST_ENABLE;
+
+  // keep clock always active
+  _fmc_fpga_inst.Init.ContinuousClock = FMC_CONTINUOUS_CLOCK_SYNC_ASYNC;
+
+  /*
+   * configure fmc timing parameters
+   */
+  FMC_NORSRAM_TimingTypeDef fmc_timing;
+
+  // don't care in sync mode
+  fmc_timing.AddressSetupTime = 15;
+
+  // don't care in sync mode
+  fmc_timing.AddressHoldTime = 15;
+
+  // don't care in sync mode
+  fmc_timing.DataSetupTime = 255;
+
+  // not needed, since nwait will be polled manually
+  fmc_timing.BusTurnAroundDuration = 0;
+
+  // use smallest allowed divisor for best performance
+  fmc_timing.CLKDivision = 2;
+
+  // stm is too slow to work with min allowed 2-cycle latency
+  fmc_timing.DataLatency = 3;
+
+  // don't care in sync mode
+  fmc_timing.AccessMode = FMC_ACCESS_MODE_A;
+
+  // initialize fmc
+  HAL_SRAM_Init(&_fmc_fpga_inst, &fmc_timing, NULL);
+}
+
+
+//------------------------------------------------------------------------------
+// EOF
+//------------------------------------------------------------------------------
diff --git a/src/stm-init.c b/src/stm-init.c
new file mode 100644
index 0000000..01a68e4
--- /dev/null
+++ b/src/stm-init.c
@@ -0,0 +1,210 @@
+/**
+  ******************************************************************************
+  * File Name          : main.c
+  * Date               : 08/07/2015 17:46:00
+  * Description        : Main program body
+  ******************************************************************************
+  *
+  * COPYRIGHT(c) 2015 STMicroelectronics
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+#include "stm-init.h"
+#include "stm-led.h"
+#include "stm-fmc.h"
+#include "stm-uart.h"
+
+UART_HandleTypeDef huart2;
+
+/* Private variables ---------------------------------------------------------*/
+static GPIO_InitTypeDef  GPIO_InitStruct;
+
+/* Private function prototypes -----------------------------------------------*/
+static void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_USART2_UART_Init(void);
+
+void stm_init(void)
+{
+
+  /* MCU Configuration----------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* System interrupt init*/
+  /* Sets the priority grouping field */
+  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_0);
+  HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_USART2_UART_Init();
+}
+
+/** System Clock Configuration
+ *
+ * HSE crystal at 25 MHz, end result is 180 MHz clock.
+ */
+static void SystemClock_Config(void)
+{
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+
+  __PWR_CLK_ENABLE();
+
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 25;
+  RCC_OscInitStruct.PLL.PLLN = 360;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = 4;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  HAL_PWREx_ActivateOverDrive();
+
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
+}
+
+#if 0
+/** System Clock Configuration
+ *
+ * HSI source, end result is 16 MHz SYSCLK
+ *
+*/
+static void old_SystemClock_Config(void)
+{
+
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+
+  __PWR_CLK_ENABLE();
+
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE3);
+
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = 6;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  /* XXX Does this need HAL_PWREx_ActivateOverDrive() and
+   * HAL_RCC_ClockConfig() to function properly??
+   */
+}
+#endif
+
+/* USART2 init function */
+static void MX_USART2_UART_Init(void)
+{
+  huart2.Instance = USART2;
+  huart2.Init.BaudRate = USART2_BAUD_RATE;
+  huart2.Init.WordLength = UART_WORDLENGTH_8B;
+  huart2.Init.StopBits = UART_STOPBITS_1;
+  huart2.Init.Parity = UART_PARITY_NONE;
+  huart2.Init.Mode = UART_MODE_TX_RX;
+  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
+
+  if (HAL_UART_Init(&huart2) != HAL_OK) {
+    /* Initialization Error */
+    Error_Handler();
+  }
+}
+
+/** Configure pins as
+        * Analog
+        * Input
+        * Output
+        * EVENT_OUT
+        * EXTI
+*/
+static void MX_GPIO_Init(void)
+{
+  /* GPIO Ports Clock Enable */
+  __GPIOJ_CLK_ENABLE();
+
+  /* Configure LED GPIO pins PJ1==red, PJ2==yellow, PJ3==green, PJ4==blue */
+  GPIO_InitStruct.Pin = LED_RED | LED_YELLOW | LED_GREEN | LED_BLUE;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
+  HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
+}
+
+/**
+ * @brief  This function is executed in case of error occurrence.
+ * @param  None
+ * @retval None
+ */
+void Error_Handler(void)
+{
+  HAL_GPIO_WritePin(LED_PORT, LED_RED, GPIO_PIN_SET);
+  while (1) { ; }
+}
+
+#ifdef USE_FULL_ASSERT
+
+/**
+   * @brief Reports the name of the source file and the source line number
+   * where the assert_param error has occurred.
+   * @param file: pointer to the source file name
+   * @param line: assert_param error line source number
+   * @retval None
+   */
+void assert_failed(uint8_t* file, uint32_t line)
+{
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+    ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+
+}
+
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/src/stm-uart.c b/src/stm-uart.c
new file mode 100644
index 0000000..61ba910
--- /dev/null
+++ b/src/stm-uart.c
@@ -0,0 +1,85 @@
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+#include "stm-uart.h"
+
+#include <string.h>
+
+UART_HandleTypeDef huart2;
+
+extern void Error_Handler();
+
+
+/* Private variables ---------------------------------------------------------*/
+
+/* Private function prototypes -----------------------------------------------*/
+
+#if 0 /* XXX moved [back] to stm-init.c */
+/* USART2 init function */
+void MX_USART2_UART_Init(void)
+{
+  huart2.Instance = USART2;
+  huart2.Init.BaudRate = USART2_BAUD_RATE;
+  huart2.Init.WordLength = UART_WORDLENGTH_8B;
+  huart2.Init.StopBits = UART_STOPBITS_1;
+  huart2.Init.Parity = UART_PARITY_NONE;
+  huart2.Init.Mode = UART_MODE_TX_RX;
+  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
+
+  if (HAL_UART_Init(&huart2) != HAL_OK) {
+    /* Initialization Error */
+    Error_Handler();
+  }
+}
+#endif
+
+void uart_send_binary(uint32_t num, uint8_t bits)
+{
+  uint32_t i;
+  unsigned char ch;
+
+  bits--;  /* bits 4 should give i = 1000, not 10000 */
+
+  i = 1 << bits;
+  while (i) {
+    ch = '0';
+    if (num & i) {
+      ch = '1';
+    }
+
+    HAL_UART_Transmit(&huart2, (uint8_t *) &ch, 1, 0x1);
+    i = i >> 1;
+  }
+}
+
+void uart_send_string(char *s)
+{
+  HAL_UART_Transmit(&huart2, (uint8_t *) s, strlen(s), 0x1);
+}
+
+void uart_send_integer(uint32_t data, uint32_t mag) {
+  uint32_t i, t;
+  unsigned char ch;
+
+  if (! mag) {
+    /* Find magnitude */
+    if (data < 10) {
+      ch = '0' + data;
+      HAL_UART_Transmit(&huart2, (uint8_t *) &ch, 1, 0x1);
+      return;
+    }
+
+    for (mag = 10; mag < data; mag = i) {
+      i = mag * 10;
+      if (i > data || i < mag)
+        break;
+    }
+  }
+  /* mag is now 10 if data is 45, and 1000 if data is 1009 */
+  for (i = mag; i; i /= 10) {
+    t = (data / i);
+    ch = '0' + t;
+    HAL_UART_Transmit(&huart2, (uint8_t *) &ch, 1, 0x1);
+    data -= (t * i);
+  }
+}
diff --git a/src/stm32f4xx_hal_msp.c b/src/stm32f4xx_hal_msp.c
new file mode 100644
index 0000000..ee2cb7e
--- /dev/null
+++ b/src/stm32f4xx_hal_msp.c
@@ -0,0 +1,143 @@
+/**
+******************************************************************************
+* File Name          : stm32f4xx_hal_msp.c
+* Description        : This file provides code for the MSP Initialization
+*                      and de-Initialization codes.
+******************************************************************************
+*
+* COPYRIGHT(c) 2015 STMicroelectronics
+*
+* Redistribution and use in source and binary forms, with or without modification,
+* are permitted provided that the following conditions are met:
+*   1. Redistributions of source code must retain the above copyright notice,
+*      this list of conditions and the following disclaimer.
+*   2. Redistributions in binary form must reproduce the above copyright notice,
+*      this list of conditions and the following disclaimer in the documentation
+*      and/or other materials provided with the distribution.
+*   3. Neither the name of STMicroelectronics nor the names of its contributors
+*      may be used to endorse or promote products derived from this software
+*      without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************
+*/
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+ * Initializes the Global MSP.
+ */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+  /* System interrupt init*/
+  /* SysTick_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+void HAL_RNG_MspInit(RNG_HandleTypeDef* hrng)
+{
+
+  if(hrng->Instance==RNG)
+    {
+      /* USER CODE BEGIN RNG_MspInit 0 */
+
+      /* USER CODE END RNG_MspInit 0 */
+      /* Peripheral clock enable */
+      __RNG_CLK_ENABLE();
+      /* USER CODE BEGIN RNG_MspInit 1 */
+
+      /* USER CODE END RNG_MspInit 1 */
+    }
+
+}
+
+void HAL_RNG_MspDeInit(RNG_HandleTypeDef* hrng)
+{
+
+  if(hrng->Instance==RNG)
+    {
+      /* USER CODE BEGIN RNG_MspDeInit 0 */
+
+      /* USER CODE END RNG_MspDeInit 0 */
+      /* Peripheral clock disable */
+      __RNG_CLK_DISABLE();
+    }
+  /* USER CODE BEGIN RNG_MspDeInit 1 */
+
+  /* USER CODE END RNG_MspDeInit 1 */
+
+}
+
+
+
+void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram)
+{
+}
+
+
+void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* hsram)
+{
+}
+
+void HAL_UART_MspInit(UART_HandleTypeDef* huart)
+{
+  GPIO_InitTypeDef GPIO_InitStruct;
+
+  if (huart->Instance == USART2) {
+    /* Peripheral clock enable */
+    __USART2_CLK_ENABLE();
+    __GPIOA_CLK_ENABLE();
+
+    /**USART2 GPIO Configuration
+       PA2     ------> USART2_TX
+       PA3     ------> USART2_RX
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_2 | GPIO_PIN_3;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+  }
+
+}
+
+void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
+{
+  if (huart->Instance == USART2) {
+    /* Peripheral clock disable */
+    __USART2_CLK_DISABLE();
+
+    /**USART2 GPIO Configuration
+       PA2     ------> USART2_TX
+       PA3     ------> USART2_RX
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2 | GPIO_PIN_3);
+  }
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/src/stm32f4xx_it.c b/src/stm32f4xx_it.c
new file mode 100644
index 0000000..b2b64bf
--- /dev/null
+++ b/src/stm32f4xx_it.c
@@ -0,0 +1,73 @@
+/**
+******************************************************************************
+* @file    stm32f4xx_it.c
+* @brief   Interrupt Service Routines.
+******************************************************************************
+*
+* COPYRIGHT(c) 2015 STMicroelectronics
+*
+* Redistribution and use in source and binary forms, with or without modification,
+* are permitted provided that the following conditions are met:
+*   1. Redistributions of source code must retain the above copyright notice,
+*      this list of conditions and the following disclaimer.
+*   2. Redistributions in binary form must reproduce the above copyright notice,
+*      this list of conditions and the following disclaimer in the documentation
+*      and/or other materials provided with the distribution.
+*   3. Neither the name of STMicroelectronics nor the names of its contributors
+*      may be used to endorse or promote products derived from this software
+*      without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************
+*/
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+#include "stm32f4xx.h"
+#include "stm32f4xx_it.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/******************************************************************************/
+/*            Cortex-M4 Processor Interruption and Exception Handlers         */
+/******************************************************************************/
+
+/**
+ * @brief This function handles System tick timer.
+ */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  HAL_SYSTICK_IRQHandler();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F4xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f4xx.s).                    */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/uart-test.c b/uart-test.c
new file mode 100644
index 0000000..0f8926a
--- /dev/null
+++ b/uart-test.c
@@ -0,0 +1,34 @@
+/*
+ * Test code that just sends the letters 'a' to 'z' over and
+ * over again using USART2.
+ *
+ * Toggles the BLUE LED slowly and the RED LED for every
+ * character sent.
+ */
+#include "stm32f4xx_hal.h"
+#include "stm-init.h"
+#include "stm-led.h"
+#include "stm-uart.h"
+
+#define DELAY() HAL_Delay(100)
+
+int
+main()
+{
+  uint8_t c = 'a';
+
+  stm_init();
+
+  while (1)
+  {
+    HAL_GPIO_TogglePin(LED_PORT, LED_RED);
+
+    HAL_UART_Transmit(&huart2, (uint8_t *) &c, 1, 0x1);
+    DELAY();
+
+    if (c++ == 'z') {
+      c = 'a';
+      HAL_GPIO_TogglePin(LED_PORT, LED_BLUE);
+    }
+  }
+}



More information about the Commits mailing list