[Cryptech-Commits] [core/math/modexp] 02/02: More cleanup. Adding a lot of compile flags to be able to silence the testbench.
git at cryptech.is
git at cryptech.is
Wed Jun 10 09:17:56 UTC 2015
This is an automated email from the git hooks/post-receive script.
joachim at secworks.se pushed a commit to branch perfopt
in repository core/math/modexp.
commit fb6d1cde71cd6f53c1277292679cff41a879c0d3
Author: Joachim Strömbergson <joachim at secworks.se>
Date: Wed Jun 10 11:17:34 2015 +0200
More cleanup. Adding a lot of compile flags to be able to silence the testbench.
---
src/tb/tb_montprod.v | 698 +++++++++++++++++++++++++++------------------------
1 file changed, 366 insertions(+), 332 deletions(-)
diff --git a/src/tb/tb_montprod.v b/src/tb/tb_montprod.v
index f4d04c7..e581e36 100644
--- a/src/tb/tb_montprod.v
+++ b/src/tb/tb_montprod.v
@@ -41,107 +41,88 @@
//------------------------------------------------------------------
`timescale 1ns/100ps
-//------------------------------------------------------------------
-// Test module.
-//------------------------------------------------------------------
module tb_montprod();
-//----------------------------------------------------------------
-// Internal constant and parameter definitions.
-//----------------------------------------------------------------
- parameter SHOW_INIT = 0;
-
- parameter DUMP_MEM = 0;
- parameter DEBUG = 0;
+ //----------------------------------------------------------------
+ // Internal constant and parameter definitions.
+ //----------------------------------------------------------------
parameter CLK_HALF_PERIOD = 2;
- parameter CLK_PERIOD = 2 * CLK_HALF_PERIOD;
-
+ parameter CLK_PERIOD = 2 * CLK_HALF_PERIOD;
+
+ parameter SHOW_INIT = 0;
+ parameter DUMP_MEM = 0;
+ parameter DEBUG = 0;
+ parameter SHOW_WRITE_MEM = 0;
+ parameter SHOW_S_MONITOR = 0;
+ parameter SHOW_BQ_DEBUG = 0;
+ parameter SHOW_FSM_STATUS = 0;
parameter DISPLAY_TEST_CYCLES = 1;
+ parameter WAIT_TIMEOUT = 100000000;
+
-//----------------------------------------------------------------
-// Register and Wire declarations.
-//----------------------------------------------------------------
+ //----------------------------------------------------------------
+ // Register and Wire declarations.
+ //----------------------------------------------------------------
reg [31 : 0] test_cycle_ctr;
reg test_cycle_ctr_rst;
reg test_cycle_ctr_inc;
-reg tb_clk;
-reg tb_reset_n;
-reg tb_calculate;
-wire tb_ready;
-reg [ 7 : 0] tb_length;
-wire [ 7 : 0] tb_opa_addr;
-reg [31 : 0] tb_opa_data;
-wire [ 7 : 0] tb_opb_addr;
-reg [31 : 0] tb_opb_data;
-wire [ 7 : 0] tb_opm_addr;
-reg [31 : 0] tb_opm_data;
-wire [ 7 : 0] tb_result_addr;
-wire [31 : 0] tb_result_data;
-wire tb_result_we;
-
-reg [31 : 0] tb_a [0 : 255]; //tb_opa_data
-reg [31 : 0] tb_b [0 : 255]; //tb_opb_data reads here
-reg [31 : 0] tb_m [0 : 255]; //tb_opm_data reads here
-reg [31 : 0] tb_r [0 : 255]; //tb_result_data writes here
-
- reg monitor_s;
-
-integer test_mont_prod_success;
-integer test_mont_prod_fail;
-
-//----------------------------------------------------------------
-// Device Under Test.
-//----------------------------------------------------------------
-
-montprod dut(
- .clk(tb_clk),
- .reset_n(tb_reset_n),
- .length(tb_length),
- .calculate(tb_calculate),
- .ready(tb_ready),
- .opa_addr(tb_opa_addr),
- .opa_data(tb_opa_data),
- .opb_addr(tb_opb_addr),
- .opb_data(tb_opb_data),
- .opm_addr(tb_opm_addr),
- .opm_data(tb_opm_data),
- .result_addr(tb_result_addr),
- .result_data(tb_result_data),
- .result_we(tb_result_we)
-);
-
-always @(posedge tb_clk)
- begin : read_test_memory
- tb_opa_data <= tb_a[tb_opa_addr];
- tb_opb_data <= tb_b[tb_opb_addr];
- tb_opm_data <= tb_m[tb_opm_addr];
-
- if (DUMP_MEM)
- $display("a %x %x b %x %x m %x %x", tb_opa_addr, tb_a[tb_opa_addr], tb_opb_addr, tb_b[tb_opb_addr], tb_opm_addr, tb_m[tb_opm_addr]);
- end
-
-always @*
- begin : write_test_memory
- if (tb_result_we == 1'b1)
- begin
- $display("write %d: %x", tb_result_addr, tb_result_data);
- tb_r[tb_result_addr] = tb_result_data;
- end
- end
+ reg tb_clk;
+ reg tb_reset_n;
+ reg tb_calculate;
+ wire tb_ready;
+ reg [ 7 : 0] tb_length;
+ wire [ 7 : 0] tb_opa_addr;
+ reg [31 : 0] tb_opa_data;
+ wire [ 7 : 0] tb_opb_addr;
+ reg [31 : 0] tb_opb_data;
+ wire [ 7 : 0] tb_opm_addr;
+ reg [31 : 0] tb_opm_data;
+ wire [ 7 : 0] tb_result_addr;
+ wire [31 : 0] tb_result_data;
+ wire tb_result_we;
+
+ reg [31 : 0] tb_a [0 : 255]; //tb_opa_data
+ reg [31 : 0] tb_b [0 : 255]; //tb_opb_data reads here
+ reg [31 : 0] tb_m [0 : 255]; //tb_opm_data reads here
+ reg [31 : 0] tb_r [0 : 255]; //tb_result_data writes here
+
+ integer test_mont_prod_success;
+ integer test_mont_prod_fail;
+ //----------------------------------------------------------------
+ // Device Under Test.
+ //----------------------------------------------------------------
+ montprod dut(
+ .clk(tb_clk),
+ .reset_n(tb_reset_n),
+ .length(tb_length),
+ .calculate(tb_calculate),
+ .ready(tb_ready),
+ .opa_addr(tb_opa_addr),
+ .opa_data(tb_opa_data),
+ .opb_addr(tb_opb_addr),
+ .opb_data(tb_opb_data),
+ .opm_addr(tb_opm_addr),
+ .opm_data(tb_opm_data),
+ .result_addr(tb_result_addr),
+ .result_data(tb_result_data),
+ .result_we(tb_result_we)
+ );
-//----------------------------------------------------------------
-// clk_gen
-//
-// Clock generator process.
-//----------------------------------------------------------------
-always
- begin : clk_gen
- #CLK_HALF_PERIOD tb_clk = !tb_clk;
- end // clk_gen
+
+
+ //----------------------------------------------------------------
+ // clk_gen
+ //
+ // Clock generator process.
+ //----------------------------------------------------------------
+ always
+ begin : clk_gen
+ #CLK_HALF_PERIOD tb_clk = !tb_clk;
+ end // clk_gen
//----------------------------------------------------------------
@@ -193,281 +174,334 @@ always
endtask // stop_test_cycle_ctr()
-//----------------------------------------------------------------
-// S monitor
-//----------------------------------------------------------------
- always @ (posedge tb_clk)
- begin : s_monitor
- if (monitor_s)
- $display("S[ 0 ]: %x", dut.s_mem.mem[0] );
+ //----------------------------------------------------------------
+ // reset_dut()
+ //
+ // Toggles reset to force the DUT into a well defined state.
+ //----------------------------------------------------------------
+ task reset_dut();
+ begin
+ $display("*** Toggle reset.");
+ tb_reset_n = 0;
+ #(2 * CLK_PERIOD);
+ tb_reset_n = 1;
end
+ endtask // reset_dut
+ //----------------------------------------------------------------
+ // init_sim()
+ //
+ // Initialize all counters and testbed functionality as well
+ // as setting the DUT inputs to defined values.
+ //----------------------------------------------------------------
+ task init_sim();
+ begin
+ $display("*** init_sim");
+ tb_clk = 0;
+ tb_reset_n = 0;
+ tb_length = 0;
+ tb_calculate = 0;
+ test_mont_prod_success = 0;
+ test_mont_prod_fail = 0;
+ end
+ endtask // init_sim
-//----------------------------------------------------------------
-// S monitor
-//----------------------------------------------------------------
- always @ (posedge tb_clk)
- begin : s_write_minitor
- if (monitor_s)
- if (dut.s_mem_we)
- $display("Write to S[0x%02x]: 0x%08x", dut.s_mem_wr_addr, dut.s_mem_new);
+
+ //----------------------------------------------------------------
+ // dump_test_memory
+ //----------------------------------------------------------------
+ always @(posedge tb_clk)
+ begin : dump_test_memory
+ tb_opa_data <= tb_a[tb_opa_addr];
+ tb_opb_data <= tb_b[tb_opb_addr];
+ tb_opm_data <= tb_m[tb_opm_addr];
+
+ if (DUMP_MEM)
+ $display("a %x %x b %x %x m %x %x", tb_opa_addr, tb_a[tb_opa_addr],
+ tb_opb_addr, tb_b[tb_opb_addr], tb_opm_addr, tb_m[tb_opm_addr]);
end
+ //----------------------------------------------------------------
+ // write_test_memory
+ //----------------------------------------------------------------
+ always @*
+ begin : write_test_memory
+ if (SHOW_WRITE_MEM)
+ if (tb_result_we == 1'b1)
+ begin
+ $display("write %d: %x", tb_result_addr, tb_result_data);
+ tb_r[tb_result_addr] = tb_result_data;
+ end
+ end
+
+
+ //----------------------------------------------------------------
+ // S monitor
+ //----------------------------------------------------------------
+ always @ (posedge tb_clk)
+ begin : s_monitor
+ if (SHOW_S_MONITOR)
+ begin
+ $display("S[ 0 ]: %x", dut.s_mem.mem[0] );
+
+ if (dut.s_mem_we)
+ $display("Write to S[0x%02x]: 0x%08x", dut.s_mem_wr_addr, dut.s_mem_new);
+ end
+ end
+
-//----------------------------------------------------------------
-//----------------------------------------------------------------
+ //----------------------------------------------------------------
+ // bq_debug
+ //----------------------------------------------------------------
always @ (posedge tb_clk)
begin : bq_debug
- if (dut.montprod_ctrl_reg == dut.CTRL_L_CALC_SM)
- $display("====================> B: %x Q: %x B_bit_index_reg: %x <=====================", dut.b_reg, dut.q_reg, dut.B_bit_index_reg);
+ if (SHOW_BQ_DEBUG)
+ if (dut.montprod_ctrl_reg == dut.CTRL_L_CALC_SM)
+ $display("====================> B: %x Q: %x B_bit_index_reg: %x <=====================",
+ dut.b_reg, dut.q_reg, dut.B_bit_index_reg);
end
- //case (montprod_ctrl_reg)
- // CTRL_LOOP_BQ:
- // $display("DEBUG: b: %d q: %d opa_data %x opb_data %x s_mem_read_data %x", b, q, opa_addr_reg, opa_data, opb_data, s_mem_read_data);
- // default:
- // begin end
- //endcase
-//----------------------------------------------------------------
-//----------------------------------------------------------------
+ //----------------------------------------------------------------
+ // fmsm_debug
+ // Display control FSM status.
+ //----------------------------------------------------------------
always @ (posedge tb_clk)
begin : fsm_debug
- if (dut.montprod_ctrl_we)
- case (dut.montprod_ctrl_new)
- dut.CTRL_IDLE:
- $display("FSM: IDLE");
- dut.CTRL_INIT_S:
- $display("FSM: INIT_S");
- dut.CTRL_LOOP_INIT:
- $display("FSM: LOOP_INIT");
- dut.CTRL_LOOP_ITER:
- $display("FSM: LOOP_ITER");
- dut.CTRL_LOOP_BQ:
- $display("FSM: LOOP_BQ");
- dut.CTRL_L_CALC_SM:
- $display("FSM: LOOP_CALC_SM");
- dut.CTRL_L_CALC_SA:
- $display("FSM: LOOP_CALC_SA");
- dut.CTRL_L_STALLPIPE_SA:
- $display("FSM: STALL_PIPE");
- dut.CTRL_L_CALC_SDIV2:
- $display("FSM: LOOP_CALC_SDIV2");
- dut.CTRL_EMIT_S:
- $display("FSM: LOOP_EMIT_S");
- dut.CTRL_DONE:
- $display("FSM: DONE");
- default:
- $display("FSM: %x", dut.montprod_ctrl_new);
- endcase
+ if (SHOW_FSM_STATUS)
+ if (dut.montprod_ctrl_we)
+ case (dut.montprod_ctrl_new)
+ dut.CTRL_IDLE:
+ $display("FSM: IDLE");
+ dut.CTRL_INIT_S:
+ $display("FSM: INIT_S");
+ dut.CTRL_LOOP_INIT:
+ $display("FSM: LOOP_INIT");
+ dut.CTRL_LOOP_ITER:
+ $display("FSM: LOOP_ITER");
+ dut.CTRL_LOOP_BQ:
+ $display("FSM: LOOP_BQ");
+ dut.CTRL_L_CALC_SM:
+ $display("FSM: LOOP_CALC_SM");
+ dut.CTRL_L_CALC_SA:
+ $display("FSM: LOOP_CALC_SA");
+ dut.CTRL_L_STALLPIPE_SA:
+ $display("FSM: STALL_PIPE");
+ dut.CTRL_L_CALC_SDIV2:
+ $display("FSM: LOOP_CALC_SDIV2");
+ dut.CTRL_EMIT_S:
+ $display("FSM: LOOP_EMIT_S");
+ dut.CTRL_DONE:
+ $display("FSM: DONE");
+ default:
+ $display("FSM: %x", dut.montprod_ctrl_new);
+ endcase
end
-//----------------------------------------------------------------
-// reset_dut()
-//
-// Toggles reset to force the DUT into a well defined state.
-//----------------------------------------------------------------
-task reset_dut();
- begin
- $display("*** Toggle reset.");
- tb_reset_n = 0;
- #(2 * CLK_PERIOD);
- tb_reset_n = 1;
- end
-endtask // reset_dut
-
-//----------------------------------------------------------------
-// init_sim()
-//
-// Initialize all counters and testbed functionality as well
-// as setting the DUT inputs to defined values.
-//----------------------------------------------------------------
-task init_sim();
- begin
- $display("*** init_sim");
- tb_clk = 0;
- tb_reset_n = 0;
- tb_length = 0;
- tb_calculate = 0;
- monitor_s = 1;
- test_mont_prod_success = 0;
- test_mont_prod_fail = 0;
- end
-endtask // init_dut
-
-//----------------------------------------------------------------
-// wait_ready()
-//
-// Wait for the ready flag in the dut to be set.
-//
-// Note: It is the callers responsibility to call the function
-// when the dut is actively processing and will in fact at some
-// point set the flag.
-//----------------------------------------------------------------
-task wait_ready();
- begin
- $display("*** wait_ready");
- begin: wait_loop
+ //----------------------------------------------------------------
+ // wait_ready()
+ //
+ // Wait for the ready flag in the dut to be set.
+ //
+ // Note: It is the callers responsibility to call the function
+ // when the dut is actively processing and will in fact at some
+ // point set the flag.
+ //----------------------------------------------------------------
+ task wait_ready();
+ begin : wait_ready
integer i;
- for (i=0; i<1000000; i=i+1)
- if (tb_ready == 0)
+
+ $display("*** waiting for core to be ready...");
+
+ i = 0;
+ while ((tb_ready == 0) && (i < WAIT_TIMEOUT))
+ begin
+ i = i + 1;
#(CLK_PERIOD);
- end
- if (tb_ready == 0)
- begin
- $display("*** wait_ready failed, never became ready!");
- $finish;
- end
- end
-endtask // wait_ready
-
-//----------------------------------------------------------------
-//----------------------------------------------------------------
-task signal_calculate();
- begin
- $display("*** signal_calculate");
- tb_calculate = 1;
- #(CLK_PERIOD);
- tb_calculate = 0;
- end
-endtask // signal_calculate
-
-
-//----------------------------------------------------------------
-// Tests the montgomery multiplications
-//----------------------------------------------------------------
-task test_mont_prod(
- input [7 : 0] length,
- input [0 : 8192-1] a,
- input [0 : 8192-1] b,
- input [0 : 8192-1] m,
- input [0 : 8192-1] expected
- );
- begin
- $display("*** test started");
- begin: copy_test_vectors
- integer i;
- integer j;
+ end
- $display("*** Initializing...");
- for (i=32'h0; i<256; i=i+1)
+ if (tb_ready == 0)
begin
- j = {i, 5'h0};
- tb_a[i] = a[j +: 32];
- tb_b[i] = b[j +: 32];
- tb_m[i] = m[j +: 32];
- tb_r[i] = 32'h0;
- if (SHOW_INIT)
- $display("*** init %0x: a: %x b: %x m: %x r: %x", i, tb_a[i], tb_b[i], tb_m[i], tb_r[i]);
+ $display("*** wait_ready failed, never became ready!");
+ $finish;
end
end
+ endtask // wait_ready
+
- $display("*** Test vector copied");
- wait_ready();
- tb_length = length;
+ //----------------------------------------------------------------
+ //----------------------------------------------------------------
+ task signal_calculate();
+ begin
+ $display("*** signal_calculate");
+ tb_calculate = 1;
+ #(CLK_PERIOD);
+ tb_calculate = 0;
+ end
+ endtask // signal_calculate
- start_test_cycle_ctr();
- signal_calculate();
- wait_ready();
+ //----------------------------------------------------------------
+ // Tests the montgomery multiplications
+ //----------------------------------------------------------------
+ task test_mont_prod(
+ input [7 : 0] length,
+ input [0 : 8192-1] a,
+ input [0 : 8192-1] b,
+ input [0 : 8192-1] m,
+ input [0 : 8192-1] expected
+ );
+ begin
+ $display("*** Mongomry multiplier test started");
+ begin: copy_test_vectors
+ integer i;
+ integer j;
+
+ $display("*** Initializing...");
+ for (i=32'h0; i<256; i=i+1)
+ begin
+ j = {i, 5'h0};
+ tb_a[i] = a[j +: 32];
+ tb_b[i] = b[j +: 32];
+ tb_m[i] = m[j +: 32];
+ tb_r[i] = 32'h0;
+ if (SHOW_INIT)
+ $display("*** init %0x: a: %x b: %x m: %x r: %x", i, tb_a[i], tb_b[i], tb_m[i], tb_r[i]);
+ end
+ end
- stop_test_cycle_ctr();
+ $display("*** Test vector copied");
+ wait_ready();
+ tb_length = length;
+
+ start_test_cycle_ctr();
+
+ signal_calculate();
+ wait_ready();
+
+ stop_test_cycle_ctr();
+
+ begin: verify_test_vectors
+ integer i;
+ integer j;
+ integer success;
+ integer fail;
+ success = 1;
+ fail = 0;
+ for (i=0; i<length; i=i+1)
+ begin
+ j = i * 32;
+ $display("offset: %02d expected 0x%08x actual 0x%08x", i, expected[j +: 32], tb_r[i]);
+ if (expected[j +: 32] != tb_r[i])
+ begin
+ success = 0;
+ fail = 1;
+ end
+ end
+ test_mont_prod_success = test_mont_prod_success + success;
+ test_mont_prod_fail = test_mont_prod_fail + fail;
+ end
- begin: verify_test_vectors
- integer i;
- integer j;
- integer success;
- integer fail;
- success = 1;
- fail = 0;
- for (i=0; i<length; i=i+1)
- begin
- j = i * 32;
- $display("offset: %02d expected 0x%08x actual 0x%08x", i, expected[j +: 32], tb_r[i]);
- if (expected[j +: 32] != tb_r[i])
- begin
- success = 0;
- fail = 1;
- end
- end
- test_mont_prod_success = test_mont_prod_success + success;
- test_mont_prod_fail = test_mont_prod_fail + fail;
+ $display("*** test stopped");
+ $display("");
end
+ endtask // test_mont_prod
- $display("*** test stopped");
- end
-endtask
-
-//----------------------------------------------------------------
-// The main test functionality.
-//----------------------------------------------------------------
-initial
- begin : montgomery_product_tests
- $display(" -- Testbench for montprod started --");
- init_sim();
- reset_dut();
-
-//* A= b B= 11 M= 13 A*B= 10 Ar= 9 Br= 7 Ar*Br= 1 A*B= 10
-
- test_mont_prod( 1, {32'h9, 8160'h0}, {32'h7, 8160'h0}, {32'h13,8160'h0}, {32'h1,8160'h0} );
-
-//* A= b B= 13 M= 11 A*B= 5 Ar= b Br= 2 Ar*Br= 5 A*B= 5
-
- test_mont_prod( 1, {32'hb, 8160'h0}, {32'h2, 8160'h0}, {32'h11,8160'h0}, {32'h5,8160'h0} );
-
-//* A= 11 B= b M= 13 A*B= 10 Ar= 7 Br= 9 Ar*Br= 1 A*B= 10
-
- test_mont_prod( 1, {32'h7, 8160'h0}, {32'h9, 8160'h0}, {32'h13,8160'h0}, {32'h1,8160'h0} );
-
-//* A= 11 B= 13 M= b A*B= 4 Ar= 2 Br= a Ar*Br= 5 A*B= 4
-
- test_mont_prod( 1, {32'h2, 8160'h0}, {32'ha, 8160'h0}, {32'h0b,8160'h0}, {32'h5,8160'h0} );
-
-//* A= 13 B= b M= 11 A*B= 5 Ar= 2 Br= b Ar*Br= 5 A*B= 5
-//* A= 13 B= 11 M= b A*B= 4 Ar= a Br= 2 Ar*Br= 5 A*B= 4
-//* A=10001 B= 11 M= 13 A*B= 7 Ar= 11 Br= 7 Ar*Br= 4 A*B= 7
-//* A=10001 B= 13 M= 11 A*B= 4 Ar= 2 Br= 2 Ar*Br= 4 A*B= 4
-//* A= 11 B=10001 M= 13 A*B= 7 Ar= 7 Br= 11 Ar*Br= 4 A*B= 7
-//* A= 11 B= 13 M=10001 A*B=143 Ar= 11 Br= 13 Ar*Br=143 A*B=143
-//* A= 13 B=10001 M= 11 A*B= 4 Ar= 2 Br= 2 Ar*Br= 4 A*B= 4
-//* A= 13 B= 11 M=10001 A*B=143 Ar= 13 Br= 11 Ar*Br=143 A*B=143
-//* A=10001 B= 11 M=7fffffff A*B=110011 Ar=20002 Br= 22 Ar*Br=220022 A*B=110011
-//* A=10001 B=7fffffff M= 11 A*B= 10 Ar= 2 Br= 8 Ar*Br= 10 A*B= 10
-//* A= 11 B=10001 M=7fffffff A*B=110011 Ar= 22 Br=20002 Ar*Br=220022 A*B=110011
-//* A= 11 B=7fffffff M=10001 A*B=7ff8 Ar= 11 Br=8000 Ar*Br=7ff8 A*B=7ff8
-//* A=7fffffff B=10001 M= 11 A*B= 10 Ar= 8 Br= 2 Ar*Br= 10 A*B= 10
-//* A=7fffffff B= 11 M=10001 A*B=7ff8 Ar=8000 Br= 11 Ar*Br=7ff8 A*B=7ff8
-
- //debug A => 0 0 1
- //debug B => 0 0 4000
- //debug M => 1ffffff ffffffff ffffffff
- //debug s => 0 0 80
- test_mont_prod( 3, {96'h1, 8096'h0}, {96'h4000, 8096'h0}, {96'h1ffffffffffffffffffffff,8096'h0}, {96'h80,8096'h0} );
-
- //debug A => 00000000 098b0437 ae647838 09d930b9 a1d269d5 03579a63 9c4e3ac5 fd070836 413389c2 321cfe8b a6a5732e bc7cbcf8 a2f1df87 19f7a767 43ef9b5d 6bd33597 23bfc574 8ec046da 5419d7ff 31811123 740b227b 709f3ace e53ba5cc 38cbc161 a0c15c88 64f26a18 423692ef a5e52a20 80d9f244 717aa2d5 e1a6680a b29eed64 57c6b005
- //debug B => 00000000 098b0437 ae647838 09d930b9 a1d269d5 03579a63 9c4e3ac5 fd070836 413389c2 321cfe8b a6a5732e bc7cbcf8 a2f1df87 19f7a767 43ef9b5d 6bd33597 23bfc574 8ec046da 5419d7ff 31811123 740b227b 709f3ace e53ba5cc 38cbc161 a0c15c88 64f26a18 423692ef a5e52a20 80d9f244 717aa2d5 e1a6680a b29eed64 57c6b005
- //debug M => 00000000 f14b5a0a 122ff247 85813db2 02c0d3af bd0a4615 2889ff7d 8f655e9e c866e586 f21003a0 e969769b 127ec8a5 67f07708 217775f7 7654cabc 3a624f9b 4074bdf1 55fa84c0 0354fe59 0ad04cfd 14e666c0 ce6cea72 788c31f4 edcf3dd7 3a5a59c1 b9b3ef41 565df033 69a82de8 f18c2793 0abd5502 f3730ec0 d1943dc4 a660a267
- //debug s => 00000000 0a8a4a44 40e5c3b0 a05383c2 4ad92fc9 0af7b72e d22fa180 f3a99e64 38ffbe72 3854bc5e 93fffa55 ce49b2cf f809c9eb 81176d8b 4f8b942c 3de18f9c 6393a70a 89924a58 5684cb90 acfd1bde b408b2c0 a8d862c1 74b5a10d 90532d4e 79fe2f50 430decda 0ed75e0a ac354c46 69ce0bd8 eb36e857 b55623d1 527b9711 86cd4d75
-
- test_mont_prod(
- 33,
-{ 1056'h098b0437ae64783809d930b9a1d269d503579a639c4e3ac5fd070836413389c2321cfe8ba6a5732ebc7cbcf8a2f1df8719f7a76743ef9b5d6bd3359723bfc5748ec046da5419d7ff31811123740b227b709f3acee53ba5cc38cbc161a0c15c8864f26a18423692efa5e52a2080d9f244717aa2d5e1a6680ab29eed6457c6b005
-, 7136'h0 },
-{ 1056'h098b0437ae64783809d930b9a1d269d503579a639c4e3ac5fd070836413389c2321cfe8ba6a5732ebc7cbcf8a2f1df8719f7a76743ef9b5d6bd3359723bfc5748ec046da5419d7ff31811123740b227b709f3acee53ba5cc38cbc161a0c15c8864f26a18423692efa5e52a2080d9f244717aa2d5e1a6680ab29eed6457c6b005
-, 7136'h0 },
-{1056'hf14b5a0a122ff24785813db202c0d3afbd0a46152889ff7d8f655e9ec866e586f21003a0e969769b127ec8a567f07708217775f77654cabc3a624f9b4074bdf155fa84c00354fe590ad04cfd14e666c0ce6cea72788c31f4edcf3dd73a5a59c1b9b3ef41565df03369a82de8f18c27930abd5502f3730ec0d1943dc4a660a267
-, 7136'h0 },
-{1056'h0a8a4a4440e5c3b0a05383c24ad92fc90af7b72ed22fa180f3a99e6438ffbe723854bc5e93fffa55ce49b2cff809c9eb81176d8b4f8b942c3de18f9c6393a70a89924a585684cb90acfd1bdeb408b2c0a8d862c174b5a10d90532d4e79fe2f50430decda0ed75e0aac354c4669ce0bd8eb36e857b55623d1527b971186cd4d75
-, 7136'h0 });
-
- $display(" -- Testbench for montprod done. --");
- $display(" tests success: %d", test_mont_prod_success);
- $display(" tests failed: %d", test_mont_prod_fail);
- $finish;
- end // montprod
+
+ //----------------------------------------------------------------
+ // short_tests
+ //
+ // Short tests that are fast to run jut to check that the
+ // functionality is as expected.
+ //----------------------------------------------------------------
+ task short_tests();
+ begin : short_tests
+ //* A= b B= 11 M= 13 A*B= 10 Ar= 9 Br= 7 Ar*Br= 1 A*B= 10
+
+ test_mont_prod( 1, {32'h9, 8160'h0}, {32'h7, 8160'h0}, {32'h13,8160'h0}, {32'h1,8160'h0} );
+
+ //* A= b B= 13 M= 11 A*B= 5 Ar= b Br= 2 Ar*Br= 5 A*B= 5
+
+ test_mont_prod( 1, {32'hb, 8160'h0}, {32'h2, 8160'h0}, {32'h11,8160'h0}, {32'h5,8160'h0} );
+
+ //* A= 11 B= b M= 13 A*B= 10 Ar= 7 Br= 9 Ar*Br= 1 A*B= 10
+
+ test_mont_prod( 1, {32'h7, 8160'h0}, {32'h9, 8160'h0}, {32'h13,8160'h0}, {32'h1,8160'h0} );
+
+ //* A= 11 B= 13 M= b A*B= 4 Ar= 2 Br= a Ar*Br= 5 A*B= 4
+
+ test_mont_prod( 1, {32'h2, 8160'h0}, {32'ha, 8160'h0}, {32'h0b,8160'h0}, {32'h5,8160'h0} );
+
+ //* A= 13 B= b M= 11 A*B= 5 Ar= 2 Br= b Ar*Br= 5 A*B= 5
+ //* A= 13 B= 11 M= b A*B= 4 Ar= a Br= 2 Ar*Br= 5 A*B= 4
+ //* A=10001 B= 11 M= 13 A*B= 7 Ar= 11 Br= 7 Ar*Br= 4 A*B= 7
+ //* A=10001 B= 13 M= 11 A*B= 4 Ar= 2 Br= 2 Ar*Br= 4 A*B= 4
+ //* A= 11 B=10001 M= 13 A*B= 7 Ar= 7 Br= 11 Ar*Br= 4 A*B= 7
+ //* A= 11 B= 13 M=10001 A*B=143 Ar= 11 Br= 13 Ar*Br=143 A*B=143
+ //* A= 13 B=10001 M= 11 A*B= 4 Ar= 2 Br= 2 Ar*Br= 4 A*B= 4
+ //* A= 13 B= 11 M=10001 A*B=143 Ar= 13 Br= 11 Ar*Br=143 A*B=143
+ //* A=10001 B= 11 M=7fffffff A*B=110011 Ar=20002 Br= 22 Ar*Br=220022 A*B=110011
+ //* A=10001 B=7fffffff M= 11 A*B= 10 Ar= 2 Br= 8 Ar*Br= 10 A*B= 10
+ //* A= 11 B=10001 M=7fffffff A*B=110011 Ar= 22 Br=20002 Ar*Br=220022 A*B=110011
+ //* A= 11 B=7fffffff M=10001 A*B=7ff8 Ar= 11 Br=8000 Ar*Br=7ff8 A*B=7ff8
+ //* A=7fffffff B=10001 M= 11 A*B= 10 Ar= 8 Br= 2 Ar*Br= 10 A*B= 10
+ //* A=7fffffff B= 11 M=10001 A*B=7ff8 Ar=8000 Br= 11 Ar*Br=7ff8 A*B=7ff8
+
+ //debug A => 0 0 1
+ //debug B => 0 0 4000
+ //debug M => 1ffffff ffffffff ffffffff
+ //debug s => 0 0 80
+ test_mont_prod( 3, {96'h1, 8096'h0}, {96'h4000, 8096'h0}, {96'h1ffffffffffffffffffffff,8096'h0}, {96'h80,8096'h0} );
+ end
+ endtask // short_tests
+
+
+ //----------------------------------------------------------------
+ // long_tests()
+ //
+ // Longer, tests with real operand sizes.
+ //----------------------------------------------------------------
+ task long_tests();
+ begin
+ //debug A => 00000000 098b0437 ae647838 09d930b9 a1d269d5 03579a63 9c4e3ac5 fd070836 413389c2 321cfe8b a6a5732e bc7cbcf8 a2f1df87 19f7a767 43ef9b5d 6bd33597 23bfc574 8ec046da 5419d7ff 31811123 740b227b 709f3ace e53ba5cc 38cbc161 a0c15c88 64f26a18 423692ef a5e52a20 80d9f244 717aa2d5 e1a6680a b29eed64 57c6b005
+ //debug B => 00000000 098b0437 ae647838 09d930b9 a1d269d5 03579a63 9c4e3ac5 fd070836 413389c2 321cfe8b a6a5732e bc7cbcf8 a2f1df87 19f7a767 43ef9b5d 6bd33597 23bfc574 8ec046da 5419d7ff 31811123 740b227b 709f3ace e53ba5cc 38cbc161 a0c15c88 64f26a18 423692ef a5e52a20 80d9f244 717aa2d5 e1a6680a b29eed64 57c6b005
+ //debug M => 00000000 f14b5a0a 122ff247 85813db2 02c0d3af bd0a4615 2889ff7d 8f655e9e c866e586 f21003a0 e969769b 127ec8a5 67f07708 217775f7 7654cabc 3a624f9b 4074bdf1 55fa84c0 0354fe59 0ad04cfd 14e666c0 ce6cea72 788c31f4 edcf3dd7 3a5a59c1 b9b3ef41 565df033 69a82de8 f18c2793 0abd5502 f3730ec0 d1943dc4 a660a267
+ //debug s => 00000000 0a8a4a44 40e5c3b0 a05383c2 4ad92fc9 0af7b72e d22fa180 f3a99e64 38ffbe72 3854bc5e 93fffa55 ce49b2cf f809c9eb 81176d8b 4f8b942c 3de18f9c 6393a70a 89924a58 5684cb90 acfd1bde b408b2c0 a8d862c1 74b5a10d 90532d4e 79fe2f50 430decda 0ed75e0a ac354c46 69ce0bd8 eb36e857 b55623d1 527b9711 86cd4d75
+
+ test_mont_prod(33,
+ { 1056'h098b0437ae64783809d930b9a1d269d503579a639c4e3ac5fd070836413389c2321cfe8ba6a5732ebc7cbcf8a2f1df8719f7a76743ef9b5d6bd3359723bfc5748ec046da5419d7ff31811123740b227b709f3acee53ba5cc38cbc161a0c15c8864f26a18423692efa5e52a2080d9f244717aa2d5e1a6680ab29eed6457c6b005
+ , 7136'h0 },
+ { 1056'h098b0437ae64783809d930b9a1d269d503579a639c4e3ac5fd070836413389c2321cfe8ba6a5732ebc7cbcf8a2f1df8719f7a76743ef9b5d6bd3359723bfc5748ec046da5419d7ff31811123740b227b709f3acee53ba5cc38cbc161a0c15c8864f26a18423692efa5e52a2080d9f244717aa2d5e1a6680ab29eed6457c6b005
+ , 7136'h0 },
+ {1056'hf14b5a0a122ff24785813db202c0d3afbd0a46152889ff7d8f655e9ec866e586f21003a0e969769b127ec8a567f07708217775f77654cabc3a624f9b4074bdf155fa84c00354fe590ad04cfd14e666c0ce6cea72788c31f4edcf3dd73a5a59c1b9b3ef41565df03369a82de8f18c27930abd5502f3730ec0d1943dc4a660a267
+ , 7136'h0 },
+ {1056'h0a8a4a4440e5c3b0a05383c24ad92fc90af7b72ed22fa180f3a99e6438ffbe723854bc5e93fffa55ce49b2cff809c9eb81176d8b4f8b942c3de18f9c6393a70a89924a585684cb90acfd1bdeb408b2c0a8d862c174b5a10d90532d4e79fe2f50430decda0ed75e0aac354c4669ce0bd8eb36e857b55623d1527b971186cd4d75
+ , 7136'h0 });
+
+ end
+ endtask // long_tests
+
+
+ //----------------------------------------------------------------
+ // The main test functionality.
+ //----------------------------------------------------------------
+ initial
+ begin : montgomery_product_tests
+ $display(" -- Testbench for montprod started --");
+ init_sim();
+ reset_dut();
+
+ short_tests();
+ long_tests();
+
+ $display(" -- Testbench for montprod done. --");
+ $display(" tests success: %d", test_mont_prod_success);
+ $display(" tests failed: %d", test_mont_prod_fail);
+ $finish;
+ end // montprod
endmodule // tb_montprod
//======================================================================
More information about the Commits
mailing list