[Cryptech-Commits] [sw/libhal] 01/58: Import FPGA I/O code from core/platform/novena/sw, add minimal autoconf, whack with a club until it builds.

git at cryptech.is git at cryptech.is
Tue Jul 7 18:24:45 UTC 2015


This is an automated email from the git hooks/post-receive script.

sra at hactrn.net pushed a commit to branch master
in repository sw/libhal.

commit 93941c6393ec3454c64528e537534284a81b04ac
Author: Rob Austein <sra at hactrn.net>
Date:   Tue May 19 23:49:18 2015 -0400

    Import FPGA I/O code from core/platform/novena/sw, add minimal
    autoconf, whack with a club until it builds.
---
 .gitignore   |    7 +
 Makefile.in  |   46 +
 configure    | 2882 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 configure.ac |   43 +
 cryptech.h   |  441 +++++++++
 hal_io_eim.c |  208 +++++
 hal_io_i2c.c |  339 +++++++
 novena-eim.c |  708 +++++++++++++++
 novena-eim.h |   53 ++
 9 files changed, 4727 insertions(+)

diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..d1767ad
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,7 @@
+*.[ao]
+*~
+Makefile
+TAGS
+autom4te.cache
+config.log
+config.status
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..02ce7c7
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,46 @@
+# @configure_input@
+
+INC = cryptech.h
+LIB = libcryptech.a
+
+BIN = hash hash_tester trng_extractor trng_tester aes_tester modexp_tester
+
+HAL_IO_OBJ_EIM	= hal_io_eim.o novena-eim.o
+HAL_IO_OBJ_I2C 	= hal_io_i2c.o
+HAL_IO_OBJ	= $(HAL_IO_OBJ_ at FPGA_BUS@)
+
+LIB_OBJ		= $(HAL_IO_OBJ)
+
+CC		= @CC@
+CFLAGS		= @CFLAGS@
+LDFLAGS		= @LDFLAGS@
+LIBS		= @LIBS@
+
+prefix		= @prefix@
+exec_prefix	= @exec_prefix@
+bindir		= @bindir@
+includedir	= @includedir@
+libdir		= @libdir@
+sysconfdir	= @sysconfdir@
+
+all: $(LIB) $(BIN)
+
+*.o: $(INC)
+
+$(BIN): $(LIB)
+
+${LIB}: $(LIB_OBJ)
+	ar rcs $@ $^
+
+install: $(LIB) $(BIN) $(INC)
+	install $(LIB) $(libdir)
+	install $(BIN) $(bindir)
+	install $(INC) $(includedir)
+
+uninstall:
+	cd $(libdir); rm -f $(LIB)
+	cd $(bindir); rm -f ${BIN}
+	cd $(includedir); rm -f $(INC)
+
+clean:
+	rm -f *.o $(LIB) $(BIN)
diff --git a/configure b/configure
new file mode 100755
index 0000000..9c91f97
--- /dev/null
+++ b/configure
@@ -0,0 +1,2882 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for libcryptech 0.1.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf at gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='libcryptech'
+PACKAGE_TARNAME='libcryptech'
+PACKAGE_VERSION='0.1'
+PACKAGE_STRING='libcryptech 0.1'
+PACKAGE_BUGREPORT=''
+PACKAGE_URL=''
+
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+LDFLAGS
+CFLAGS
+CC
+FPGA_BUS
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+FPGA_BUS
+CC
+CFLAGS
+LDFLAGS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures libcryptech 0.1 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/libcryptech]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of libcryptech 0.1:";;
+   esac
+  cat <<\_ACEOF
+
+Some influential environment variables:
+  FPGA_BUS    Bus architecture to use (currently must be "EIM" or "I2C")
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     Linker flags
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+libcryptech configure 0.1
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by libcryptech $as_me 0.1, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+case $FPGA_BUS in #(
+  "") :
+    FPGA_BUS=EIM ;; #(
+  EIM|I2C) :
+     ;; #(
+  *) :
+    as_fn_error $? "Invalid setting of FPGA_BUS, must be \"EIM\" or \"I2C\"" "$LINENO" 5 ;;
+esac
+
+case $CC in #(
+  "") :
+    CC="cc" ;; #(
+  *) :
+     ;;
+esac
+
+case $CFLAGS in #(
+  "") :
+    CFLAGS="-g -Wall -fPIC" ;; #(
+  *) :
+     ;;
+esac
+
+case $LDFLAGS in #(
+  "") :
+    LDFLAGS="-g" ;; #(
+  *) :
+     ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: FPGA bus: $FPGA_BUS" >&5
+$as_echo "$as_me: FPGA bus: $FPGA_BUS" >&6;}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: C compiler: $CC" >&5
+$as_echo "$as_me: C compiler: $CC" >&6;}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: C compiler flags: $CFLAGS" >&5
+$as_echo "$as_me: C compiler flags: $CFLAGS" >&6;}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: Linker flags: $LDFLAGS" >&5
+$as_echo "$as_me: Linker flags: $LDFLAGS" >&6;}
+
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by libcryptech $as_me 0.1, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+libcryptech config.status 0.1
+configured by $0, generated by GNU Autoconf 2.69,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X "  :F $CONFIG_FILES      "
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+
+  esac
+
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..43db468
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,43 @@
+# -*- Autoconf -*-
+
+# Bare-minimum autoconf, with as little of the usual voodoo as
+# possible.  This probably ought to be replaced by a ten-line Python
+# script, some day when we have time to shave that yak.
+#
+# We deliberately avoid constructs like AC_PROG_CC because they're
+# almost certain to guess wrong about the settings we want.
+#
+# If you don't understand why there are so many square brackets, put
+# the keyboard down and back away slowly before somebody gets hurt.
+
+AC_INIT([libcryptech], [0.1])
+
+AC_ARG_VAR([FPGA_BUS],	[Bus architecture to use (currently must be "EIM" or "I2C")])
+AC_ARG_VAR([CC],	[C compiler command])
+AC_ARG_VAR([CFLAGS],	[C compiler flags])
+AC_ARG_VAR([LDFLAGS],	[Linker flags])
+
+AS_CASE($FPGA_BUS,
+	[""],[FPGA_BUS=EIM],
+	[EIM|I2C],[],
+	[AC_MSG_ERROR([Invalid setting of FPGA_BUS, must be "EIM" or "I2C"])])
+
+AS_CASE($CC,
+	[""],[CC="cc"],
+	[])
+	
+AS_CASE($CFLAGS,
+	[""],[CFLAGS="-g -Wall -fPIC"],
+	[])
+	
+AS_CASE($LDFLAGS,
+	[""],[LDFLAGS="-g"],
+	[])
+	
+AC_MSG_NOTICE([FPGA bus: $FPGA_BUS])
+AC_MSG_NOTICE([C compiler: $CC])
+AC_MSG_NOTICE([C compiler flags: $CFLAGS])
+AC_MSG_NOTICE([Linker flags: $LDFLAGS])
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/cryptech.h b/cryptech.h
new file mode 100644
index 0000000..9a10c58
--- /dev/null
+++ b/cryptech.h
@@ -0,0 +1,441 @@
+//======================================================================
+//
+// cryptech.h
+// ----------
+// Memory map and access functions for Cryptech cores.
+//
+//
+// Authors: Joachim Strombergson, Paul Selkirk
+// Copyright (c) 2015, NORDUnet A/S All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+// - Redistributions of source code must retain the above copyright notice,
+//   this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright
+//   notice, this list of conditions and the following disclaimer in the
+//   documentation and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may
+//   be used to endorse or promote products derived from this software
+//   without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+//======================================================================
+
+/*
+
+Each Cryptech core has a set of 4-byte registers, which are accessed
+through a 16-bit address. The address space is divided as follows:
+  3 bits segment selector       | up to 8 segments
+  5 bits core selector          | up to 32 cores/segment (see note below)
+  8 bits register selector      | up to 256 registers/core (see modexp below)
+
+i.e, the address is structured as:
+sss ccccc rrrrrrrr
+
+The I2C and UART communication channels use this 16-bit address format
+directly in their read and write commands.
+
+The EIM communications channel translates this 16-bit address into a
+32-bit memory-mapped address in the range 0x08000000..807FFFF:
+00001000000000 sss 0 ccccc rrrrrrrr 00
+
+EIM, as implemented on the Novena, uses a 19-bit address space:
+  Bits 18..16 are the semgent selector.
+  Bits 15..10 are the core selector.
+  Bits 9..2 are the register selector.
+  Bits 1..0 are zero, because reads and writes are always word aligned.
+
+Note that EIM can support 64 cores per segment, but we sacrifice one bit
+in order to map it into a 16-bit address space.
+
+*/
+
+
+//------------------------------------------------------------------
+// Default sizes
+//------------------------------------------------------------------
+#define CORE_SIZE               0x100
+#define SEGMENT_SIZE            0x20 * CORE_SIZE
+
+
+//------------------------------------------------------------------
+// Segments
+//------------------------------------------------------------------
+#define SEGMENT_OFFSET_GLOBALS  0 * SEGMENT_SIZE
+#define SEGMENT_OFFSET_HASHES   1 * SEGMENT_SIZE
+#define SEGMENT_OFFSET_RNGS     2 * SEGMENT_SIZE
+#define SEGMENT_OFFSET_CIPHERS  3 * SEGMENT_SIZE
+#define SEGMENT_OFFSET_MATH     4 * SEGMENT_SIZE
+
+
+//------------------------------------------------------------------
+// Addresses and codes common to all cores
+//------------------------------------------------------------------
+#define ADDR_NAME0              0x00
+#define ADDR_NAME1              0x01
+#define ADDR_VERSION            0x02
+#define ADDR_CTRL               0x08
+#define CTRL_INIT               1
+#define CTRL_NEXT               2
+#define ADDR_STATUS             0x09
+#define STATUS_READY            1
+#define STATUS_VALID            2
+
+
+// a handy macro from cryptlib
+#ifndef bitsToBytes
+#define bitsToBytes(x)          (x / 8)
+#endif
+
+
+//------------------------------------------------------------------
+// Board segment.
+// Board-level registers and communication channel registers
+//------------------------------------------------------------------
+#define BOARD_ADDR_BASE         SEGMENT_OFFSET_GLOBALS + (0 * CORE_SIZE)
+#define BOARD_ADDR_NAME0        BOARD_ADDR_BASE + ADDR_NAME0
+#define BOARD_ADDR_NAME1        BOARD_ADDR_BASE + ADDR_NAME1
+#define BOARD_ADDR_VERSION      BOARD_ADDR_BASE + ADDR_VERSION
+#define BOARD_ADDR_DUMMY        BOARD_ADDR_BASE + 0xFF
+
+#define COMM_ADDR_BASE          SEGMENT_OFFSET_GLOBALS + (1 * CORE_SIZE)
+#define COMM_ADDR_NAME0         COMM_ADDR_BASE + ADDR_NAME0
+#define COMM_ADDR_NAME1         COMM_ADDR_BASE + ADDR_NAME1
+#define COMM_ADDR_VERSION       COMM_ADDR_BASE + ADDR_VERSION
+
+// current name and version values
+#define NOVENA_BOARD_NAME0      "PVT1"
+#define NOVENA_BOARD_NAME1      "    "
+#define NOVENA_BOARD_VERSION    "0.10"
+
+#define EIM_INTERFACE_NAME0     "eim "
+#define EIM_INTERFACE_NAME1     "    "
+#define EIM_INTERFACE_VERSION   "0.10"
+
+#define I2C_INTERFACE_NAME0     "i2c "
+#define I2C_INTERFACE_NAME1     "    "
+#define I2C_INTERFACE_VERSION   "0.10"
+
+
+//------------------------------------------------------------------
+// Hashes segment.
+//------------------------------------------------------------------
+// addresses common to all hash cores
+#define ADDR_BLOCK              0x10
+#define ADDR_DIGEST             0x20      // except SHA512
+
+// addresses and codes for the specific hash cores.
+#define SHA1_ADDR_BASE          SEGMENT_OFFSET_HASHES + (0 * CORE_SIZE)
+#define SHA1_ADDR_NAME0         SHA1_ADDR_BASE + ADDR_NAME0
+#define SHA1_ADDR_NAME1         SHA1_ADDR_BASE + ADDR_NAME1
+#define SHA1_ADDR_VERSION       SHA1_ADDR_BASE + ADDR_VERSION
+#define SHA1_ADDR_CTRL          SHA1_ADDR_BASE + ADDR_CTRL
+#define SHA1_ADDR_STATUS        SHA1_ADDR_BASE + ADDR_STATUS
+#define SHA1_ADDR_BLOCK         SHA1_ADDR_BASE + ADDR_BLOCK
+#define SHA1_ADDR_DIGEST        SHA1_ADDR_BASE + ADDR_DIGEST
+#define SHA1_BLOCK_LEN          bitsToBytes(512)
+#define SHA1_LENGTH_LEN         bitsToBytes(64)
+#define SHA1_DIGEST_LEN         bitsToBytes(160)
+
+#define SHA256_ADDR_BASE        SEGMENT_OFFSET_HASHES + (1 * CORE_SIZE)
+#define SHA256_ADDR_NAME0       SHA256_ADDR_BASE + ADDR_NAME0
+#define SHA256_ADDR_NAME1       SHA256_ADDR_BASE + ADDR_NAME1
+#define SHA256_ADDR_VERSION     SHA256_ADDR_BASE + ADDR_VERSION
+#define SHA256_ADDR_CTRL        SHA256_ADDR_BASE + ADDR_CTRL
+#define SHA256_ADDR_STATUS      SHA256_ADDR_BASE + ADDR_STATUS
+#define SHA256_ADDR_BLOCK       SHA256_ADDR_BASE + ADDR_BLOCK
+#define SHA256_ADDR_DIGEST      SHA256_ADDR_BASE + ADDR_DIGEST
+#define SHA256_BLOCK_LEN        bitsToBytes(512)
+#define SHA256_LENGTH_LEN       bitsToBytes(64)
+#define SHA256_DIGEST_LEN       bitsToBytes(256)
+
+#define SHA512_ADDR_BASE        SEGMENT_OFFSET_HASHES + (2 * CORE_SIZE)
+#define SHA512_ADDR_NAME0       SHA512_ADDR_BASE + ADDR_NAME0
+#define SHA512_ADDR_NAME1       SHA512_ADDR_BASE + ADDR_NAME1
+#define SHA512_ADDR_VERSION     SHA512_ADDR_BASE + ADDR_VERSION
+#define SHA512_ADDR_CTRL        SHA512_ADDR_BASE + ADDR_CTRL
+#define SHA512_ADDR_STATUS      SHA512_ADDR_BASE + ADDR_STATUS
+#define SHA512_ADDR_BLOCK       SHA512_ADDR_BASE + ADDR_BLOCK
+#define SHA512_ADDR_DIGEST      SHA512_ADDR_BASE + 0x40
+#define SHA512_BLOCK_LEN        bitsToBytes(1024)
+#define SHA512_LENGTH_LEN       bitsToBytes(128)
+#define SHA512_224_DIGEST_LEN   bitsToBytes(224)
+#define SHA512_256_DIGEST_LEN   bitsToBytes(256)
+#define SHA384_DIGEST_LEN       bitsToBytes(384)
+#define SHA512_DIGEST_LEN       bitsToBytes(512)
+#define MODE_SHA_512_224        0 << 2
+#define MODE_SHA_512_256        1 << 2
+#define MODE_SHA_384            2 << 2
+#define MODE_SHA_512            3 << 2
+
+// current name and version values
+#define SHA1_NAME0              "sha1"
+#define SHA1_NAME1              "    "
+#define SHA1_VERSION            "0.50"
+
+#define SHA256_NAME0            "sha2"
+#define SHA256_NAME1            "-256"
+#define SHA256_VERSION          "0.80"
+
+#define SHA512_NAME0            "sha2"
+#define SHA512_NAME1            "-512"
+#define SHA512_VERSION          "0.80"
+
+
+//-----------------------------------------------------------------
+// TRNG segment.
+//-----------------------------------------------------------------
+// addresses and codes for the TRNG cores */
+#define TRNG_ADDR_BASE          SEGMENT_OFFSET_RNGS + (0x00 * CORE_SIZE)
+#define TRNG_ADDR_NAME0         TRNG_ADDR_BASE + ADDR_NAME0
+#define TRNG_ADDR_NAME1         TRNG_ADDR_BASE + ADDR_NAME1
+#define TRNG_ADDR_VERSION       TRNG_ADDR_BASE + ADDR_VERSION
+#define TRNG_ADDR_CTRL          TRNG_ADDR_BASE + 0x10
+#define TRNG_CTRL_DISCARD       1
+#define TRNG_CTRL_TEST_MODE     2
+#define TRNG_ADDR_STATUS        TRNG_ADDR_BASE + 0x11
+// no status bits defined (yet)
+#define TRNG_ADDR_DELAY         TRNG_ADDR_BASE + 0x13
+
+#define ENTROPY1_ADDR_BASE      SEGMENT_OFFSET_RNGS + (0x05 * CORE_SIZE)
+#define ENTROPY1_ADDR_NAME0     ENTROPY1_ADDR_BASE + ADDR_NAME0
+#define ENTROPY1_ADDR_NAME1     ENTROPY1_ADDR_BASE + ADDR_NAME1
+#define ENTROPY1_ADDR_VERSION   ENTROPY1_ADDR_BASE + ADDR_VERSION
+#define ENTROPY1_ADDR_CTRL      ENTROPY1_ADDR_BASE + 0x10
+#define ENTROPY1_CTRL_ENABLE    1
+#define ENTROPY1_ADDR_STATUS    ENTROPY1_ADDR_BASE + 0x11
+#define ENTROPY1_STATUS_VALID   1
+#define ENTROPY1_ADDR_ENTROPY   ENTROPY1_ADDR_BASE + 0x20
+#define ENTROPY1_ADDR_DELTA     ENTROPY1_ADDR_BASE + 0x30
+
+#define ENTROPY2_ADDR_BASE      SEGMENT_OFFSET_RNGS + (0x06 * CORE_SIZE)
+#define ENTROPY2_ADDR_NAME0     ENTROPY2_ADDR_BASE + ADDR_NAME0
+#define ENTROPY2_ADDR_NAME1     ENTROPY2_ADDR_BASE + ADDR_NAME1
+#define ENTROPY2_ADDR_VERSION   ENTROPY2_ADDR_BASE + ADDR_VERSION
+#define ENTROPY2_ADDR_CTRL      ENTROPY2_ADDR_BASE + 0x10
+#define ENTROPY2_CTRL_ENABLE    1
+#define ENTROPY2_ADDR_STATUS    ENTROPY2_ADDR_BASE + 0x11
+#define ENTROPY2_STATUS_VALID   1
+#define ENTROPY2_ADDR_OPA       ENTROPY2_ADDR_BASE + 0x18
+#define ENTROPY2_ADDR_OPB       ENTROPY2_ADDR_BASE + 0x19
+#define ENTROPY2_ADDR_ENTROPY   ENTROPY2_ADDR_BASE + 0x20
+#define ENTROPY2_ADDR_RAW       ENTROPY2_ADDR_BASE + 0x21
+#define ENTROPY2_ADDR_ROSC      ENTROPY2_ADDR_BASE + 0x22
+
+#define MIXER_ADDR_BASE         SEGMENT_OFFSET_RNGS + (0x0a * CORE_SIZE)
+#define MIXER_ADDR_NAME0        MIXER_ADDR_BASE + ADDR_NAME0
+#define MIXER_ADDR_NAME1        MIXER_ADDR_BASE + ADDR_NAME1
+#define MIXER_ADDR_VERSION      MIXER_ADDR_BASE + ADDR_VERSION
+#define MIXER_ADDR_CTRL         MIXER_ADDR_BASE + 0x10
+#define MIXER_CTRL_ENABLE       1
+#define MIXER_CTRL_RESTART      2
+#define MIXER_ADDR_STATUS       MIXER_ADDR_BASE + 0x11
+// no status bits defined (yet)
+#define MIXER_ADDR_TIMEOUT      MIXER_ADDR_BASE + 0x20
+
+#define CSPRNG_ADDR_BASE        SEGMENT_OFFSET_RNGS + (0x0b * CORE_SIZE)
+#define CSPRNG_ADDR_NAME0       CSPRNG_ADDR_BASE + ADDR_NAME0
+#define CSPRNG_ADDR_NAME1       CSPRNG_ADDR_BASE + ADDR_NAME1
+#define CSPRNG_ADDR_VERSION     CSPRNG_ADDR_BASE + ADDR_VERSION
+#define CSPRNG_ADDR_CTRL        CSPRNG_ADDR_BASE + 0x10
+#define CSPRNG_CTRL_ENABLE      1
+#define CSPRNG_CTRL_SEED        2
+#define CSPRNG_ADDR_STATUS      CSPRNG_ADDR_BASE + 0x11
+#define CSPRNG_STATUS_VALID     1
+#define CSPRNG_ADDR_RANDOM      CSPRNG_ADDR_BASE + 0x20
+#define CSPRNG_ADDR_NROUNDS     CSPRNG_ADDR_BASE + 0x40
+#define CSPRNG_ADDR_NBLOCKS_LO  CSPRNG_ADDR_BASE + 0x41
+#define CSPRNG_ADDR_NBLOCKS_HI  CSPRNG_ADDR_BASE + 0x42
+
+// current name and version values
+#define TRNG_NAME0              "trng"
+#define TRNG_NAME1              "    "
+#define TRNG_VERSION            "0.50"
+
+#define AVALANCHE_ENTROPY_NAME0   "extn"
+#define AVALANCHE_ENTROPY_NAME1   "oise"
+#define AVALANCHE_ENTROPY_VERSION "0.10"
+
+#define ROSC_ENTROPY_NAME0      "rosc"
+#define ROSC_ENTROPY_NAME1      " ent"
+#define ROSC_ENTROPY_VERSION    "0.10"
+
+#define CSPRNG_NAME0            "cspr"
+#define CSPRNG_NAME1            "ng  "
+#define CSPRNG_VERSION          "0.50"
+
+
+// -----------------------------------------------------------------
+// CIPHERS segment.
+// -----------------------------------------------------------------
+// aes core.
+#define AES_ADDR_BASE           SEGMENT_OFFSET_CIPHERS + (0 * CORE_SIZE)
+#define AES_ADDR_NAME0          AES_ADDR_BASE + ADDR_NAME0
+#define AES_ADDR_NAME1          AES_ADDR_BASE + ADDR_NAME1
+#define AES_ADDR_VERSION        AES_ADDR_BASE + ADDR_VERSION
+#define AES_ADDR_CTRL           AES_ADDR_BASE + ADDR_CTRL
+#define AES_ADDR_STATUS         AES_ADDR_BASE + ADDR_STATUS
+
+#define AES_ADDR_CONFIG         AES_ADDR_BASE + 0x0a
+#define AES_CONFIG_ENCDEC       1
+#define AES_CONFIG_KEYLEN       2
+
+#define AES_ADDR_KEY0           AES_ADDR_BASE + 0x10
+#define AES_ADDR_KEY1           AES_ADDR_BASE + 0x11
+#define AES_ADDR_KEY2           AES_ADDR_BASE + 0x12
+#define AES_ADDR_KEY3           AES_ADDR_BASE + 0x13
+#define AES_ADDR_KEY4           AES_ADDR_BASE + 0x14
+#define AES_ADDR_KEY5           AES_ADDR_BASE + 0x15
+#define AES_ADDR_KEY6           AES_ADDR_BASE + 0x16
+#define AES_ADDR_KEY7           AES_ADDR_BASE + 0x17
+
+#define AES_ADDR_BLOCK0         AES_ADDR_BASE + 0x20
+#define AES_ADDR_BLOCK1         AES_ADDR_BASE + 0x21
+#define AES_ADDR_BLOCK2         AES_ADDR_BASE + 0x22
+#define AES_ADDR_BLOCK3         AES_ADDR_BASE + 0x23
+
+#define AES_ADDR_RESULT0        AES_ADDR_BASE + 0x30
+#define AES_ADDR_RESULT1        AES_ADDR_BASE + 0x31
+#define AES_ADDR_RESULT2        AES_ADDR_BASE + 0x32
+#define AES_ADDR_RESULT3        AES_ADDR_BASE + 0x33
+
+// current name and version values
+#define AES_CORE_NAME0          "aes "
+#define AES_CORE_NAME1          "    "
+#define AES_CORE_VERSION        "0.80"
+
+
+// Chacha core
+#define CHACHA_ADDR_BASE        SEGMENT_OFFSET_CIPHERS + (1 * CORE_SIZE)
+#define CHACHA_ADDR_NAME0       CHACHA_ADDR_BASE + ADDR_NAME0
+#define CHACHA_ADDR_NAME1       CHACHA_ADDR_BASE + ADDR_NAME1
+#define CHACHA_ADDR_VERSION     CHACHA_ADDR_BASE + ADDR_VERSION
+#define CHACHA_ADDR_CTRL        CHACHA_ADDR_BASE + ADDR_CTRL
+#define CHACHA_ADDR_STATUS      CHACHA_ADDR_BASE + ADDR_STATUS
+
+#define CHACHA_ADDR_KEYLEN      CHACHA_ADDR_BASE + 0x0a
+#define CHACHA_KEYLEN           1
+
+#define CHACHA_ADDR_ROUNDS      CHACHA_ADDR_BASE + 0x0b
+
+#define CHACHA_ADDR_KEY0        CHACHA_ADDR_BASE + 0x10
+#define CHACHA_ADDR_KEY1        CHACHA_ADDR_BASE + 0x11
+#define CHACHA_ADDR_KEY2        CHACHA_ADDR_BASE + 0x12
+#define CHACHA_ADDR_KEY3        CHACHA_ADDR_BASE + 0x13
+#define CHACHA_ADDR_KEY4        CHACHA_ADDR_BASE + 0x14
+#define CHACHA_ADDR_KEY5        CHACHA_ADDR_BASE + 0x15
+#define CHACHA_ADDR_KEY6        CHACHA_ADDR_BASE + 0x16
+#define CHACHA_ADDR_KEY7        CHACHA_ADDR_BASE + 0x17
+
+#define CHACHA_ADDR_IV0         CHACHA_ADDR_BASE + 0x20
+#define CHACHA_ADDR_IV1         CHACHA_ADDR_BASE + 0x21
+
+#define CHACHA_ADDR_DATA_IN0    CHACHA_ADDR_BASE + 0x40
+#define CHACHA_ADDR_DATA_IN1    CHACHA_ADDR_BASE + 0x41
+#define CHACHA_ADDR_DATA_IN2    CHACHA_ADDR_BASE + 0x42
+#define CHACHA_ADDR_DATA_IN3    CHACHA_ADDR_BASE + 0x43
+#define CHACHA_ADDR_DATA_IN4    CHACHA_ADDR_BASE + 0x44
+#define CHACHA_ADDR_DATA_IN5    CHACHA_ADDR_BASE + 0x45
+#define CHACHA_ADDR_DATA_IN6    CHACHA_ADDR_BASE + 0x46
+#define CHACHA_ADDR_DATA_IN7    CHACHA_ADDR_BASE + 0x47
+#define CHACHA_ADDR_DATA_IN8    CHACHA_ADDR_BASE + 0x48
+#define CHACHA_ADDR_DATA_IN9    CHACHA_ADDR_BASE + 0x49
+#define CHACHA_ADDR_DATA_IN10   CHACHA_ADDR_BASE + 0x4a
+#define CHACHA_ADDR_DATA_IN11   CHACHA_ADDR_BASE + 0x4b
+#define CHACHA_ADDR_DATA_IN12   CHACHA_ADDR_BASE + 0x4c
+#define CHACHA_ADDR_DATA_IN13   CHACHA_ADDR_BASE + 0x4d
+#define CHACHA_ADDR_DATA_IN14   CHACHA_ADDR_BASE + 0x4e
+#define CHACHA_ADDR_DATA_IN15   CHACHA_ADDR_BASE + 0x4f
+
+#define CHACHA_ADDR_DATA_OUT0   CHACHA_ADDR_BASE + 0x80
+#define CHACHA_ADDR_DATA_OUT1   CHACHA_ADDR_BASE + 0x81
+#define CHACHA_ADDR_DATA_OUT2   CHACHA_ADDR_BASE + 0x82
+#define CHACHA_ADDR_DATA_OUT3   CHACHA_ADDR_BASE + 0x83
+#define CHACHA_ADDR_DATA_OUT4   CHACHA_ADDR_BASE + 0x84
+#define CHACHA_ADDR_DATA_OUT5   CHACHA_ADDR_BASE + 0x85
+#define CHACHA_ADDR_DATA_OUT6   CHACHA_ADDR_BASE + 0x86
+#define CHACHA_ADDR_DATA_OUT7   CHACHA_ADDR_BASE + 0x87
+#define CHACHA_ADDR_DATA_OUT8   CHACHA_ADDR_BASE + 0x88
+#define CHACHA_ADDR_DATA_OUT9   CHACHA_ADDR_BASE + 0x89
+#define CHACHA_ADDR_DATA_OUT10  CHACHA_ADDR_BASE + 0x8a
+#define CHACHA_ADDR_DATA_OUT11  CHACHA_ADDR_BASE + 0x8b
+#define CHACHA_ADDR_DATA_OUT12  CHACHA_ADDR_BASE + 0x8c
+#define CHACHA_ADDR_DATA_OUT13  CHACHA_ADDR_BASE + 0x8d
+#define CHACHA_ADDR_DATA_OUT14  CHACHA_ADDR_BASE + 0x8e
+#define CHACHA_ADDR_DATA_OUT15  CHACHA_ADDR_BASE + 0x8f
+
+// current name and version values
+#define CHACHA_NAME0            "chac"
+#define CHACHA_NAME1            "ha  "
+#define CHACHA_VERSION          "0.80"
+
+
+// -----------------------------------------------------------------
+// MATH segment.
+// -----------------------------------------------------------------
+// Modexp core.
+#define MODEXP_ADDR_BASE        SEGMENT_OFFSET_MATH + (0x00 * CORE_SIZE)
+#define MODEXP_ADDR_NAME0       MODEXP_ADDR_BASE + ADDR_NAME0
+#define MODEXP_ADDR_NAME1       MODEXP_ADDR_BASE + ADDR_NAME1
+#define MODEXP_ADDR_VERSION     MODEXP_ADDR_BASE + ADDR_VERSION
+#define MODEXP_ADDR_CTRL        MODEXP_ADDR_BASE + ADDR_CTRL
+#define MODEXP_CTRL_INIT_BIT    1
+#define MODEXP_CTRL_NEXT_BIT    2
+#define MODEXP_ADDR_STATUS      MODEXP_ADDR_BASE + ADDR_STATUS
+
+#define MODEXP_ADDR_DELAY       MODEXP_ADDR_BASE + 0x13
+#define MODEXP_STATUS_READY     1
+
+#define MODEXP_MODULUS_LENGTH   MODEXP_ADDR_BASE + 0x20
+#define MODEXP_EXPONENT_LENGTH  MODEXP_ADDR_BASE + 0x21
+#define MODEXP_LENGTH           MODEXP_ADDR_BASE + 0x22
+
+#define MODEXP_MODULUS_PTR_RST  MODEXP_ADDR_BASE + 0x30
+#define MODEXP_MODULUS_DATA     MODEXP_ADDR_BASE + 0x31
+
+#define MODEXP_EXPONENT_PTR_RST MODEXP_ADDR_BASE + 0x40
+#define MODEXP_EXPONENT_DATA    MODEXP_ADDR_BASE + 0x41
+
+#define MODEXP_MESSAGE_PTR_RST  MODEXP_ADDR_BASE + 0x50
+#define MODEXP_MESSAGE_DATA     MODEXP_ADDR_BASE + 0x51
+
+#define MODEXP_RESULT_PTR_RST   MODEXP_ADDR_BASE + 0x60
+#define MODEXP_RESULT_DATA      MODEXP_ADDR_BASE + 0x61
+
+#define MODEXP_NAME0            "mode"
+#define MODEXP_NAME1            "xp  "
+#define MODEXP_VERSION          "0.51"
+
+
+//------------------------------------------------------------------
+// Public I/O functions
+//------------------------------------------------------------------
+void hal_io_set_debug(int onoff);
+int hal_io_write(off_t offset, const uint8_t *buf, size_t len);
+int hal_io_read(off_t offset, uint8_t *buf, size_t len);
+int hal_io_expected(off_t offset, const uint8_t *expected, size_t len);
+int hal_io_init(off_t offset);
+int hal_io_next(off_t offset);
+int hal_io_wait(off_t offset, uint8_t status, int *count);
+int hal_io_wait_ready(off_t offset);
+int hal_io_wait_valid(off_t offset);
+
+
+//======================================================================
+// EOF cryptech.h
+//======================================================================
diff --git a/hal_io_eim.c b/hal_io_eim.c
new file mode 100644
index 0000000..ebffd24
--- /dev/null
+++ b/hal_io_eim.c
@@ -0,0 +1,208 @@
+/* 
+ * hal_io_eim.c
+ * ------------
+ * This module contains common code to talk to the FPGA over the EIM bus.
+ * 
+ * Author: Paul Selkirk
+ * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ *
+ * - Neither the name of the NORDUnet nor the names of its contributors may
+ *   be used to endorse or promote products derived from this software
+ *   without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/ioctl.h>
+#include <stdint.h>
+#include <arpa/inet.h>
+
+#include "novena-eim.h"
+#include "cryptech.h"
+
+static int debug = 0;
+static int inited = 0;
+
+/* ---------------- EIM low-level code ---------------- */
+
+static int init(void)
+{
+    if (inited)
+        return 0;
+
+    if (eim_setup() != 0) {
+        fprintf(stderr, "EIM setup failed\n");
+        return -1;
+    }
+
+    inited = 1;
+    return 0;
+}
+
+/* translate cryptech register number to EIM address
+ *
+ * register number format:
+ * 3 bits segment selector
+ * 5 bits core selector (6 bits in native eim)
+ * 8 bits register selector
+ *
+ * sss ccccc rrrrrrrr => 00001000000000 sss 0 ccccc rrrrrrrr 00
+ */
+static off_t eim_offset(off_t offset)
+{
+    return EIM_BASE_ADDR + ((offset & ~0x1fff) << 3) + ((offset & 0x1fff) << 2);
+}
+
+/* ---------------- test-case low-level code ---------------- */
+
+void hal_io_set_debug(int onoff)
+{
+    debug = onoff;
+}
+
+static void dump(char *label, const uint8_t *buf, size_t len)
+{
+    if (debug) {
+        int i;
+        printf("%s [", label);
+        for (i = 0; i < len; ++i)
+            printf(" %02x", buf[i]);
+        printf(" ]\n");
+    }
+}
+
+int hal_io_write(off_t offset, const uint8_t *buf, size_t len)
+{
+    if (init() != 0)
+        return -1;
+
+    dump("write ", buf, len);
+
+    offset = eim_offset(offset);
+    for (; len > 0; offset += 4, buf += 4, len -= 4) {
+        uint32_t val;
+        val = htonl(*(uint32_t *)buf);
+        eim_write_32(offset, &val);
+    }
+
+    return 0;
+}
+
+int hal_io_read(off_t offset, uint8_t *buf, size_t len)
+{
+    uint8_t *rbuf = buf;
+    int rlen = len;
+
+    if (init() != 0)
+        return -1;
+
+    offset = eim_offset(offset);
+    for (; rlen > 0; offset += 4, rbuf += 4, rlen -= 4) {
+        uint32_t val;
+        eim_read_32(offset, &val);
+        *(uint32_t *)rbuf = ntohl(val);
+    }
+
+    dump("read  ", buf, len);
+
+    return 0;
+}
+
+int hal_io_expected(off_t offset, const uint8_t *expected, size_t len)
+{
+    uint8_t *buf;
+    int i;
+
+    buf = malloc(len);
+    if (buf == NULL) {
+        perror("malloc");
+        return 1;
+    }
+    dump("expect", expected, len);
+
+    if (hal_io_read(offset, buf, len) != 0)
+        goto errout;
+
+    for (i = 0; i < len; ++i)
+        if (buf[i] != expected[i]) {
+            fprintf(stderr, "response byte %d: expected 0x%02x, got 0x%02x\n",
+                    i, expected[i], buf[i]);
+            goto errout;
+        }
+
+    free(buf);
+    return 0;
+errout:
+    free(buf);
+    return 1;
+}
+
+int hal_io_init(off_t offset)
+{
+    uint8_t buf[4] = { 0, 0, 0, CTRL_INIT };
+
+    return hal_io_write(offset, buf, 4);
+}
+
+int hal_io_next(off_t offset)
+{
+    uint8_t buf[4] = { 0, 0, 0, CTRL_NEXT };
+
+    return hal_io_write(offset, buf, 4);
+}
+
+int hal_io_wait(off_t offset, uint8_t status, int *count)
+{
+    uint8_t buf[4];
+    int i;
+
+    for (i = 1; ; ++i) {
+        if (count && (*count > 0) && (i >= *count)) {
+            fprintf(stderr, "hal_io_wait timed out\n");
+            return 1;
+        }
+        if (hal_io_read(offset, buf, 4) != 0)
+            return -1;
+        if (buf[3] & status) {
+            if (count)
+                *count = i;
+            return 0;
+        }
+    }
+}
+
+int hal_io_wait_ready(off_t offset)
+{
+    int limit = 256;
+    return hal_io_wait(offset, STATUS_READY, &limit);
+}
+
+int hal_io_wait_valid(off_t offset)
+{
+    int limit = 256;
+    return hal_io_wait(offset, STATUS_VALID, &limit);
+}
diff --git a/hal_io_i2c.c b/hal_io_i2c.c
new file mode 100644
index 0000000..f521e73
--- /dev/null
+++ b/hal_io_i2c.c
@@ -0,0 +1,339 @@
+/* 
+ * hal_io_i2c.c
+ * ------------
+ * This module contains common code to talk to the FPGA over the I2C bus.
+ * 
+ * Author: Paul Selkirk
+ * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ *
+ * - Neither the name of the NORDUnet nor the names of its contributors may
+ *   be used to endorse or promote products derived from this software
+ *   without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/ioctl.h>
+#include <stdint.h>
+
+#include "cryptech.h"
+
+#define I2C_dev                 "/dev/i2c-2"
+#define I2C_addr                0x0f
+#define I2C_SLAVE               0x0703
+
+static int debug = 0;
+static int i2cfd = -1;
+
+/* ---------------- I2C low-level code ---------------- */
+
+void hal_io_set_debug(int onoff)
+{
+    debug = onoff;
+}
+
+static void dump(char *label, const uint8_t *buf, size_t len)
+{
+    if (debug) {
+        int i;
+        printf("%s [", label);
+        for (i = 0; i < len; ++i)
+            printf(" %02x", buf[i]);
+        printf(" ]\n");
+    }
+}
+
+static void i2c_close(void)
+{
+    close(i2cfd);
+}
+
+static int i2c_open(void)
+{
+    if (i2cfd >= 0)
+        return 0;
+
+    i2cfd = open(I2C_dev, O_RDWR);
+    if (i2cfd < 0) {
+        fprintf(stderr, "Unable to open %s: ", I2C_dev);
+        perror("");
+        i2cfd = 0;
+        return 1;
+    }
+
+    if (ioctl(i2cfd, I2C_SLAVE, I2C_addr) < 0) {
+        fprintf(stderr, "Unable to set I2C slave device 0x%02x: ", I2C_addr);
+        perror("");
+        return 1;
+    }
+
+    if (atexit(i2c_close) != 0) {
+        fprintf(stderr, "Unable to set I2C atexit handler.");
+        return 1;
+    }
+
+    return 0;
+}
+
+static int i2c_write(const uint8_t *buf, size_t len)
+{
+    if (i2c_open() != 0)
+        return 1;
+
+    dump("write ", buf, len);
+
+    if (write(i2cfd, buf, len) != len) {
+        perror("i2c write failed");
+        return 1;
+    }
+
+    return 0;
+}
+
+static int i2c_read(uint8_t *b)
+{
+    if (i2c_open() != 0)
+        return 1;
+
+    /* read() on the i2c device only returns one byte at a time,
+     * and hal_io_get_resp() needs to parse the response one byte at a time
+     */
+    if (read(i2cfd, b, 1) != 1) {
+        perror("i2c read failed");
+        return 1;
+    }
+
+    return 0;
+}
+
+/* ---------------- test-case low-level code ---------------- */
+
+/* coretest command codes */
+#define SOC       0x55
+#define EOC       0xaa
+#define READ_CMD  0x10
+#define WRITE_CMD 0x11
+#define RESET_CMD 0x01
+
+/* coretest response codes */
+#define SOR       0xaa
+#define EOR       0x55
+#define READ_OK   0x7f
+#define WRITE_OK  0x7e
+#define RESET_OK  0x7d
+#define UNKNOWN   0xfe
+#define ERROR     0xfd
+
+static int hal_io_send_write_cmd(off_t offset, const uint8_t *data)
+{
+    uint8_t buf[9] = { SOC, WRITE_CMD, (offset >> 8) & 0xff, offset & 0xff,
+                       data[0], data[1], data[2], data[3], EOC };
+
+    return i2c_write(buf, sizeof(buf));
+}
+
+static int hal_io_send_read_cmd(off_t offset)
+{
+    uint8_t buf[5] = { SOC, READ_CMD, (offset >> 8) & 0xff, offset & 0xff, EOC };
+
+    return i2c_write(buf, sizeof(buf));
+}
+
+static int hal_io_get_resp(uint8_t *buf, size_t len)
+{
+    int i;
+
+    for (i = 0; i < len; ++i) {
+        if (i2c_read(&buf[i]) != 0)
+            return 1;
+        if ((i == 0) && (buf[i] != SOR)) {
+            /* we've gotten out of sync, and there's probably nothing we can do */
+            fprintf(stderr, "response byte 0: expected 0x%02x (SOR), got 0x%02x\n",
+                    SOR, buf[0]);
+            return 1;
+        }
+        else if (i == 1) {      /* response code */
+            switch (buf[i]) {
+            case READ_OK:
+                len = 9;
+                break;
+            case WRITE_OK:
+                len = 5;
+                break;
+            case RESET_OK:
+                len = 3;
+                break;
+            case ERROR:
+            case UNKNOWN:
+                len = 4;
+                break;
+            default:
+                /* we've gotten out of sync, and there's probably nothing we can do */
+                fprintf(stderr, "unknown response code 0x%02x\n", buf[i]);
+                return 1;
+            }
+        }
+    }
+
+    dump("read  ", buf, len);
+
+    return 0;
+}
+
+static int hal_io_compare(uint8_t *buf, const uint8_t *expected, size_t len)
+{
+    int i;
+
+    /* start at byte 1 because SOR has already been tested */
+    for (i = 1; i < len; ++i) {
+        if (buf[i] != expected[i]) {
+            fprintf(stderr, "response byte %d: expected 0x%02x, got 0x%02x\n",
+                    i, expected[i], buf[i]);
+            return 1;
+        }
+    }
+
+    return 0;
+}
+
+static int hal_io_get_write_resp(off_t offset)
+{
+    uint8_t buf[5];
+    uint8_t expected[5] = { SOR, WRITE_OK, (offset >> 8) & 0xff, offset & 0xff, EOR };
+
+    return
+        hal_io_get_resp(buf, sizeof(buf)) ||
+        hal_io_compare(buf, expected, sizeof(expected));
+}
+
+static int hal_io_get_read_resp(off_t offset, uint8_t *data)
+{
+    uint8_t buf[9];
+    uint8_t expected[4] = { SOR, READ_OK, (offset >> 8) & 0xff, offset & 0xff };
+
+    if ((hal_io_get_resp(buf, sizeof(buf)) != 0) ||
+        (hal_io_compare(buf, expected, 4) != 0) || buf[8] != EOR)
+        return 1;
+
+    data[0] = buf[4];
+    data[1] = buf[5];
+    data[2] = buf[6];
+    data[3] = buf[7];
+
+    return 0;
+}
+
+static int hal_io_get_read_resp_expected(off_t offset, const uint8_t *data)
+{
+    uint8_t buf[9];
+    uint8_t expected[9] = { SOR, READ_OK, (offset >> 8) & 0xff, offset & 0xff,
+                            data[0], data[1], data[2], data[3], EOR };
+
+    dump("expect", expected, 9);
+
+    return (hal_io_get_resp(buf, sizeof(buf)) ||
+            hal_io_compare(buf, expected, sizeof(buf)));
+}
+
+int hal_io_write(off_t offset, const uint8_t *buf, size_t len)
+{
+    for (; len > 0; offset++, buf += 4, len -= 4) {
+        if (hal_io_send_write_cmd(offset, buf) ||
+            hal_io_get_write_resp(offset))
+            return 1;
+    }
+
+    return 0;
+}
+
+int hal_io_read(off_t offset, uint8_t *buf, size_t len)
+{
+    for (; len > 0; offset++, buf += 4, len -= 4) {
+        if (hal_io_send_read_cmd(offset) ||
+            hal_io_get_read_resp(offset, buf))
+            return 1;
+    }
+
+    return 0;
+}
+
+int hal_io_expected(off_t offset, const uint8_t *buf, size_t len)
+{
+    for (; len > 0; offset++, buf += 4, len -= 4) {
+        if (hal_io_send_read_cmd(offset) ||
+            hal_io_get_read_resp_expected(offset, buf))
+            return 1;
+    }
+
+    return 0;
+}
+
+int hal_io_init(off_t offset)
+{
+    uint8_t buf[4] = { 0, 0, 0, CTRL_INIT };
+
+    return hal_io_write(offset, buf, 4);
+}
+
+int hal_io_next(off_t offset)
+{
+    uint8_t buf[4] = { 0, 0, 0, CTRL_NEXT };
+
+    return hal_io_write(offset, buf, 4);
+}
+
+int hal_io_wait(off_t offset, uint8_t status, int *count)
+{
+    uint8_t buf[4];
+    int i;
+
+    for (i = 1; ; ++i) {
+        if (count && (*count > 0) && (i >= *count)) {
+            fprintf(stderr, "hal_io_wait timed out\n");
+            return 1;
+        }
+        if (hal_io_read(offset, buf, 4) != 0)
+            return -1;
+        if (buf[3] & status) {
+            if (count)
+                *count = i;
+            return 0;
+        }
+    }
+}
+
+int hal_io_wait_ready(off_t offset)
+{
+    int limit = 10;
+    return hal_io_wait(offset, STATUS_READY, &limit);
+}
+
+int hal_io_wait_valid(off_t offset)
+{
+    int limit = 10;
+    return hal_io_wait(offset, STATUS_VALID, &limit);
+}
diff --git a/novena-eim.c b/novena-eim.c
new file mode 100644
index 0000000..85bfac0
--- /dev/null
+++ b/novena-eim.c
@@ -0,0 +1,708 @@
+/* 
+ * novena-eim.c
+ * ------------
+ * This module contains the userland magic to set up and use the EIM bus.
+ *
+ * 
+ * Author: Pavel Shatov
+ * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ *
+ * - Neither the name of the NORDUnet nor the names of its contributors may
+ *   be used to endorse or promote products derived from this software
+ *   without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <sys/mman.h>
+
+#include "novena-eim.h"
+
+
+//------------------------------------------------------------------------------
+// Defines
+//------------------------------------------------------------------------------
+#define MEMORY_DEVICE   "/dev/mem"
+
+#define IOMUXC_MUX_MODE_ALT0                    0       // 000
+
+#define IOMUXC_PAD_CTL_SRE_FAST                 1       // 1
+#define IOMUXC_PAD_CTL_DSE_33_OHM               7       // 111
+#define IOMUXC_PAD_CTL_SPEED_MEDIUM_10          2       // 10
+#define IOMUXC_PAD_CTL_ODE_DISABLED             0       // 0
+#define IOMUXC_PAD_CTL_PKE_DISABLED             0       // 0
+#define IOMUXC_PAD_CTL_PUE_PULL                 1       // 1
+#define IOMUXC_PAD_CTL_PUS_100K_OHM_PU          2       // 10
+#define IOMUXC_PAD_CTL_HYS_DISABLED             0       // 0
+
+#define CCM_CGR_OFF                             0       // 00
+#define CCM_CGR_ON_EXCEPT_STOP                  3       // 11
+
+
+//------------------------------------------------------------------------------
+// CPU Registers
+//------------------------------------------------------------------------------
+enum IMX6DQ_REGISTER_OFFSET
+{
+        IOMUXC_SW_MUX_CTL_PAD_EIM_CS0_B         = 0x020E00F8,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_OE_B          = 0x020E0100,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_RW            = 0x020E0104,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_LBA_B         = 0x020E0108,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD00          = 0x020E0114,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD01          = 0x020E0118,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD02          = 0x020E011C,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD03          = 0x020E0120,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD04          = 0x020E0124,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD05          = 0x020E0128,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD06          = 0x020E012C,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD07          = 0x020E0130,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD08          = 0x020E0134,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD09          = 0x020E0138,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD10          = 0x020E013C,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD11          = 0x020E0140,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD12          = 0x020E0144,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD13          = 0x020E0148,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD14          = 0x020E014C,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_AD15          = 0x020E0150,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_WAIT_B        = 0x020E0154,
+        IOMUXC_SW_MUX_CTL_PAD_EIM_BCLK          = 0x020E0158,
+
+        IOMUXC_SW_PAD_CTL_PAD_EIM_CS0_B         = 0x020E040C,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_OE_B          = 0x020E0414,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_RW            = 0x020E0418,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_LBA_B         = 0x020E041C,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD00          = 0x020E0428,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD01          = 0x020E042C,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD02          = 0x020E0430,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD03          = 0x020E0434,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD04          = 0x020E0438,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD05          = 0x020E043C,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD06          = 0x020E0440,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD07          = 0x020E0444,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD08          = 0x020E0448,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD09          = 0x020E044C,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD10          = 0x020E0450,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD11          = 0x020E0454,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD12          = 0x020E0458,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD13          = 0x020E045C,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD14          = 0x020E0460,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_AD15          = 0x020E0464,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_WAIT_B        = 0x020E0468,
+        IOMUXC_SW_PAD_CTL_PAD_EIM_BCLK          = 0x020E046C,
+        
+        CCM_CCGR6                               = 0x020C4080,
+        
+        EIM_CS0GCR1                             = 0x021B8000,
+        EIM_CS0GCR2                             = 0x021B8004,
+        EIM_CS0RCR1                             = 0x021B8008,
+        EIM_CS0RCR2                             = 0x021B800C,
+        EIM_CS0WCR1                             = 0x021B8010,
+        EIM_CS0WCR2                             = 0x021B8014,
+
+        EIM_WCR                                 = 0x021B8090,
+        EIM_WIAR                                = 0x021B8094,
+        EIM_EAR                                 = 0x021B8098,
+};
+
+
+//------------------------------------------------------------------------------
+// Structures
+//------------------------------------------------------------------------------
+struct IOMUXC_SW_MUX_CTL_PAD_EIM
+{
+        unsigned int    mux_mode                :  3;
+        unsigned int    reserved_3              :  1;
+        unsigned int    sion                    :  1;
+        unsigned int    reserved_31_5           : 27;
+};
+
+struct IOMUXC_SW_PAD_CTL_PAD_EIM
+{
+        unsigned int    sre                     : 1;
+        unsigned int    reserved_2_1            : 2;
+        unsigned int    dse                     : 3;
+        unsigned int    speed                   : 2;
+        unsigned int    reserved_10_8           : 3;
+        unsigned int    ode                     : 1;
+        unsigned int    pke                     : 1;
+        unsigned int    pue                     : 1;
+        unsigned int    pus                     : 2;
+        unsigned int    hys                     : 1;
+        unsigned int    reserved_31_17          : 15;
+};
+
+struct CCM_CCGR6
+{
+        unsigned int    cg0_usboh3              : 2;
+        unsigned int    cg1_usdhc1              : 2;
+        unsigned int    cg2_usdhc2              : 2;
+        unsigned int    cg3_usdhc3              : 2;
+        
+        unsigned int    cg3_usdhc4              : 2;
+        unsigned int    cg5_eim_slow            : 2;
+        unsigned int    cg6_vdoaxiclk           : 2;
+        unsigned int    cg7_vpu                 : 2;
+        
+        unsigned int    cg8_reserved            : 2;
+        unsigned int    cg9_reserved            : 2;
+        unsigned int    cg10_reserved           : 2;
+        unsigned int    cg11_reserved           : 2;
+        
+        unsigned int    cg12_reserved           : 2;
+        unsigned int    cg13_reserved           : 2;
+        unsigned int    cg14_reserved           : 2;
+        unsigned int    cg15_reserved           : 2;
+};
+
+struct EIM_CS_GCR1
+{
+        unsigned int    csen                    : 1;
+        unsigned int    swr                     : 1;
+        unsigned int    srd                     : 1;
+        unsigned int    mum                     : 1;
+        unsigned int    wfl                     : 1;
+        unsigned int    rfl                     : 1;
+        unsigned int    cre                     : 1;
+        unsigned int    crep                    : 1;
+        unsigned int    bl                      : 3;
+        unsigned int    wc                      : 1;
+        unsigned int    bcd                     : 2;
+        unsigned int    bcs                     : 2;
+        unsigned int    dsz                     : 3;
+        unsigned int    sp                      : 1;
+        unsigned int    csrec                   : 3;
+        unsigned int    aus                     : 1;
+        unsigned int    gbc                     : 3;
+        unsigned int    wp                      : 1;
+        unsigned int    psz                     : 4;
+};
+
+struct EIM_CS_GCR2
+{
+        unsigned int    adh                     :  2;
+        unsigned int    reserved_3_2            :  2;
+        unsigned int    daps                    :  4;
+        unsigned int    dae                     :  1;
+        unsigned int    dap                     :  1;
+        unsigned int    reserved_11_10          :  2;
+        unsigned int    mux16_byp_grant         :  1;
+        unsigned int    reserved_31_13          : 19;
+};
+
+struct EIM_CS_RCR1
+{
+        unsigned int    rcsn                    : 3;
+        unsigned int    reserved_3              : 1;
+        unsigned int    rcsa                    : 3;
+        unsigned int    reserved_7              : 1;
+        unsigned int    oen                     : 3;
+        unsigned int    reserved_11             : 1;
+        unsigned int    oea                     : 3;
+        unsigned int    reserved_15             : 1;
+        unsigned int    radvn                   : 3;
+        unsigned int    ral                     : 1;
+        unsigned int    radva                   : 3;
+        unsigned int    reserved_23             : 1;
+        unsigned int    rwsc                    : 6;
+        unsigned int    reserved_31_30          : 2;
+};
+
+struct EIM_CS_RCR2
+{
+        unsigned int    rben                    :  3;
+        unsigned int    rbe                     :  1;
+        unsigned int    rbea                    :  3;
+        unsigned int    reserved_7              :  1;
+        unsigned int    rl                      :  2;
+        unsigned int    reserved_11_10          :  2;
+        unsigned int    pat                     :  3;
+        unsigned int    apr                     :  1;
+        unsigned int    reserved_31_16          : 16;
+};
+
+struct EIM_CS_WCR1
+{
+        unsigned int    wcsn                    : 3;
+        unsigned int    wcsa                    : 3;
+        unsigned int    wen                     : 3;
+        unsigned int    wea                     : 3;
+        unsigned int    wben                    : 3;
+        unsigned int    wbea                    : 3;
+        unsigned int    wadvn                   : 3;
+        unsigned int    wadva                   : 3;
+        unsigned int    wwsc                    : 6;
+        unsigned int    wbed                    : 1;
+        unsigned int    wal                     : 1;
+};
+
+struct EIM_CS_WCR2
+{
+        unsigned int    wbcdd                   :  1;
+        unsigned int    reserved_31_1           : 31;
+};
+
+struct EIM_WCR
+{
+        unsigned int    bcm                     :  1;
+        unsigned int    gbcd                    :  2;
+        unsigned int    reserved_3              :  1;
+        unsigned int    inten                   :  1;
+        unsigned int    intpol                  :  1;
+        unsigned int    reserved_7_6            :  2;
+        unsigned int    wdog_en                 :  1;
+        unsigned int    wdog_limit              :  2;
+        unsigned int    reserved_31_11          : 21;
+};
+
+struct EIM_WIAR
+{
+        unsigned int    ips_req                 :  1;
+        unsigned int    ips_ack                 :  1;
+        unsigned int    irq                     :  1;
+        unsigned int    errst                   :  1;
+        unsigned int    aclk_en                 :  1;
+        unsigned int    reserved_31_5           : 27;
+};
+
+struct EIM_EAR
+{
+        unsigned int    error_addr              : 32;
+};
+
+
+//------------------------------------------------------------------------------
+// Variables
+//------------------------------------------------------------------------------
+static long     mem_page_size   = 0;
+static int      mem_dev_fd      = -1;
+static void *   mem_map_ptr     = MAP_FAILED;
+static off_t    mem_base_addr   = 0;
+
+
+//------------------------------------------------------------------------------
+// Prototypes
+//------------------------------------------------------------------------------
+static void     _eim_setup_iomuxc       (void);
+static void     _eim_setup_ccm          (void);
+static void     _eim_setup_eim          (void);
+static void     _eim_cleanup            (void);
+static off_t    _eim_calc_offset        (off_t);
+static void     _eim_remap_mem          (off_t);
+
+
+//------------------------------------------------------------------------------
+// Set up EIM bus. Returns 0 on success, -1 on failure.
+//------------------------------------------------------------------------------
+int eim_setup(void)
+{
+    // register cleanup function
+    if (atexit(_eim_cleanup) != 0) {
+        fprintf(stderr, "ERROR: atexit() failed.\n");
+        return -1;
+    }
+
+    // determine memory page size to use in mmap()
+    mem_page_size = sysconf(_SC_PAGESIZE);
+    if (mem_page_size < 1) {
+        fprintf(stderr, "ERROR: sysconf(_SC_PAGESIZE) == %ld\n", mem_page_size);
+        return -1;
+    }
+
+    // try to open memory device
+    mem_dev_fd = open(MEMORY_DEVICE, O_RDWR | O_SYNC);
+    if (mem_dev_fd == -1) {
+        fprintf(stderr, "ERROR: open(%s) failed.\n", MEMORY_DEVICE);
+        return -1;
+    }
+
+    // configure IOMUXC
+    _eim_setup_iomuxc();
+
+    // configure Clock Controller Module
+    _eim_setup_ccm();
+
+    /* We need to properly configure EIM mode and all the corresponding parameters.
+     * That's a lot of code, let's do it now.
+     */
+    _eim_setup_eim();
+
+    // done
+    return 0;
+}
+
+
+//------------------------------------------------------------------------------
+// Shut down EIM bus. This is called automatically on exit().
+//------------------------------------------------------------------------------
+static void _eim_cleanup(void)
+{
+    // unmap memory if needed
+    if (mem_map_ptr != MAP_FAILED)
+        if (munmap(mem_map_ptr, mem_page_size) != 0)
+            fprintf(stderr, "WARNING: munmap() failed.\n");
+
+    // close memory device if needed
+    if (mem_dev_fd != -1)
+        if (close(mem_dev_fd) != 0)
+            fprintf(stderr, "WARNING: close() failed.\n");
+}
+
+
+//------------------------------------------------------------------------------
+// Several blocks in the CPU have common pins. We use the I/O MUX Controller
+// to configure what block will actually use I/O pins. We wait for the EIM
+// module to be able to communicate with the on-board FPGA.
+//------------------------------------------------------------------------------
+static void _eim_setup_iomuxc(void)
+{
+    // create structures
+    struct IOMUXC_SW_MUX_CTL_PAD_EIM    reg_mux;                        // mux control register
+    struct IOMUXC_SW_PAD_CTL_PAD_EIM    reg_pad;                        // pad control register
+
+    // setup mux control register
+    reg_mux.mux_mode            = IOMUXC_MUX_MODE_ALT0;                 // ALT0 mode must be used for EIM
+    reg_mux.sion                = 0;                                    // forced input not needed
+    reg_mux.reserved_3          = 0;                                    // must be 0
+    reg_mux.reserved_31_5       = 0;                                    // must be 0
+
+    // setup pad control register
+    reg_pad.sre                 = IOMUXC_PAD_CTL_SRE_FAST;              // fast slew rate
+    reg_pad.dse                 = IOMUXC_PAD_CTL_DSE_33_OHM;            // highest drive strength
+    reg_pad.speed               = IOMUXC_PAD_CTL_SPEED_MEDIUM_10;       // medium speed
+    reg_pad.ode                 = IOMUXC_PAD_CTL_ODE_DISABLED;          // open drain not needed
+    reg_pad.pke                 = IOMUXC_PAD_CTL_PKE_DISABLED;          // neither pull nor keeper are needed
+    reg_pad.pue                 = IOMUXC_PAD_CTL_PUE_PULL;              // doesn't matter actually, because PKE is disabled
+    reg_pad.pus                 = IOMUXC_PAD_CTL_PUS_100K_OHM_PU;       // doesn't matter actually, because PKE is disabled
+    reg_pad.hys                 = IOMUXC_PAD_CTL_HYS_DISABLED;          // use CMOS, not Schmitt trigger input
+    reg_pad.reserved_2_1        = 0;                                    // must be 0
+    reg_pad.reserved_10_8       = 0;                                    // must be 0
+    reg_pad.reserved_31_17      = 0;                                    // must be 0
+
+    // all the pins must be configured to use the same ALT0 mode
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_CS0_B,       (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_OE_B,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_RW,          (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_LBA_B,       (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD00,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD01,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD02,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD03,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD04,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD05,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD06,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD07,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD08,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD09,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD10,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD11,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD12,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD13,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD14,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_AD15,        (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_WAIT_B,      (uint32_t *)&reg_mux);
+    eim_write_32(IOMUXC_SW_MUX_CTL_PAD_EIM_BCLK,        (uint32_t *)&reg_mux);
+
+    // we need to configure all the I/O pads too
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_CS0_B,       (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_OE_B,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_RW,          (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_LBA_B,       (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD00,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD01,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD02,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD03,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD04,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD05,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD06,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD07,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD08,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD09,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD10,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD11,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD12,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD13,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD14,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_AD15,        (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_WAIT_B,      (uint32_t *)&reg_pad);
+    eim_write_32(IOMUXC_SW_PAD_CTL_PAD_EIM_BCLK,        (uint32_t *)&reg_pad);
+}
+
+
+//------------------------------------------------------------------------------
+// Configure Clock Controller Module to enable clocking of EIM block.
+//------------------------------------------------------------------------------
+static void _eim_setup_ccm(void)
+{
+    // create structure
+    struct CCM_CCGR6 ccm_ccgr6;
+
+    // read register
+    eim_read_32(CCM_CCGR6, (uint32_t *)&ccm_ccgr6);
+
+    // modify register
+    ccm_ccgr6.cg0_usboh3                = CCM_CGR_ON_EXCEPT_STOP;
+    ccm_ccgr6.cg1_usdhc1                = CCM_CGR_OFF;
+    ccm_ccgr6.cg2_usdhc2                = CCM_CGR_ON_EXCEPT_STOP;
+    ccm_ccgr6.cg3_usdhc3                = CCM_CGR_ON_EXCEPT_STOP;
+
+    ccm_ccgr6.cg3_usdhc4                = CCM_CGR_OFF;
+    ccm_ccgr6.cg5_eim_slow              = CCM_CGR_ON_EXCEPT_STOP;
+    ccm_ccgr6.cg6_vdoaxiclk             = CCM_CGR_OFF;
+    ccm_ccgr6.cg7_vpu                   = CCM_CGR_OFF;
+
+    ccm_ccgr6.cg8_reserved              = 0;
+    ccm_ccgr6.cg9_reserved              = 0;
+    ccm_ccgr6.cg10_reserved             = 0;
+    ccm_ccgr6.cg11_reserved             = 0;
+    ccm_ccgr6.cg12_reserved             = 0;
+    ccm_ccgr6.cg13_reserved             = 0;
+    ccm_ccgr6.cg14_reserved             = 0;
+    ccm_ccgr6.cg15_reserved             = 0;
+
+    // write register
+    eim_write_32(CCM_CCGR6, (uint32_t *)&ccm_ccgr6);
+}
+
+
+//------------------------------------------------------------------------------
+// Configure EIM mode and all the corresponding parameters. That's a lot of code.
+//------------------------------------------------------------------------------
+static void _eim_setup_eim(void)
+{
+    // create structures
+    struct EIM_CS_GCR1  gcr1;
+    struct EIM_CS_GCR2  gcr2;
+    struct EIM_CS_RCR1  rcr1;
+    struct EIM_CS_RCR2  rcr2;
+    struct EIM_CS_WCR1  wcr1;
+    struct EIM_CS_WCR2  wcr2;
+
+    struct EIM_WCR              wcr;
+    struct EIM_WIAR             wiar;
+    struct EIM_EAR              ear;
+
+    // read all the registers
+    eim_read_32(EIM_CS0GCR1, (uint32_t *)&gcr1);
+    eim_read_32(EIM_CS0GCR2, (uint32_t *)&gcr2);
+    eim_read_32(EIM_CS0RCR1, (uint32_t *)&rcr1);
+    eim_read_32(EIM_CS0RCR2, (uint32_t *)&rcr2);
+    eim_read_32(EIM_CS0WCR1, (uint32_t *)&wcr1);
+    eim_read_32(EIM_CS0WCR2, (uint32_t *)&wcr2);
+
+    eim_read_32(EIM_WCR,        (uint32_t *)&wcr);
+    eim_read_32(EIM_WIAR,       (uint32_t *)&wiar);
+    eim_read_32(EIM_EAR,        (uint32_t *)&ear);
+
+    // manipulate registers as needed
+    gcr1.csen           = 1;    // chip select is enabled
+    gcr1.swr            = 1;    // write is sync
+    gcr1.srd            = 1;    // read is sync
+    gcr1.mum            = 1;    // address and data are multiplexed
+    gcr1.wfl            = 0;    // write latency is not fixed
+    gcr1.rfl            = 0;    // read latency is not fixed
+    gcr1.cre            = 0;    // CRE signal not needed
+    //gcr1.crep         = x;    // don't care, CRE not used
+    gcr1.bl             = 4;    // burst length
+    gcr1.wc             = 0;    // write is not continuous
+    gcr1.bcd            = 3;    // BCLK divisor is 3+1=4
+    gcr1.bcs            = 1;    // delay from ~CS to BCLK is 1 cycle
+    gcr1.dsz            = 1;    // 16 bits per databeat at DATA[15:0]
+    gcr1.sp             = 0;    // supervisor protection is disabled
+    gcr1.csrec          = 1;    // ~CS recovery is 1 cycle
+    gcr1.aus            = 1;    // address is not shifted
+    gcr1.gbc            = 1;    // ~CS gap is 1 cycle
+    gcr1.wp             = 0;    // write protection is not enabled
+    //gcr1.psz          = x;    // don't care, page mode is not used
+
+    gcr2.adh            = 0;    // address hold duration is 1 cycle
+    //gcr2.daps         = x;    // don't care, DTACK is not used
+    gcr2.dae            = 0;    // DTACK is not used
+    //gcr2.dap          = x;    // don't care, DTACK is not used
+    gcr2.mux16_byp_grant= 1;    // enable grant mechanism
+    gcr2.reserved_3_2   = 0;    // must be 0
+    gcr2.reserved_11_10 = 0;    // must be 0
+    gcr2.reserved_31_13 = 0;    // must be 0
+
+    //rcr1.rcsn         = x;    // don't care in sync mode
+    rcr1.rcsa           = 0;    // no delay for ~CS needed
+    //rcr1.oen          = x;    // don't care in sync mode
+    rcr1.oea            = 0;    // no delay for ~OE needed
+    rcr1.radvn          = 0;    // no delay for ~LBA needed
+    rcr1.ral            = 0;    // clear ~LBA when needed
+    rcr1.radva          = 0;    // no delay for ~LBA needed
+    rcr1.rwsc           = 1;    // one wait state
+    rcr1.reserved_3     = 0;    // must be 0
+    rcr1.reserved_7     = 0;    // must be 0
+    rcr1.reserved_11    = 0;    // must be 0
+    rcr1.reserved_15    = 0;    // must be 0
+    rcr1.reserved_23    = 0;    // must be 0
+    rcr1.reserved_31_30 = 0;    // must be 0
+
+    //rcr2.rben         = x;    // don't care in sync mode
+    rcr2.rbe            = 0;    // BE is disabled
+    //rcr2.rbea         = x;    // don't care when BE is not used
+    rcr2.rl             = 0;    // read latency is 0
+    //rcr2.pat          = x;    // don't care when page read is not used
+    rcr2.apr            = 0;    // page read mode is not used
+    rcr2.reserved_7     = 0;    // must be 0
+    rcr2.reserved_11_10 = 0;    // must be 0
+    rcr2.reserved_31_16 = 0;    // must be 0
+
+    //wcr1.wcsn         = x;    // don't care in sync mode
+    wcr1.wcsa           = 0;    // no delay for ~CS needed
+    //wcr1.wen          = x;    // don't care in sync mode
+    wcr1.wea            = 0;    // no delay for ~WR_N needed
+    //wcr1.wben         = x;    // don't care in sync mode
+    //wcr1.wbea         = x;    // don't care in sync mode
+    wcr1.wadvn          = 0;    // no delay for ~LBA needed
+    wcr1.wadva          = 0;    // no delay for ~LBA needed
+    wcr1.wwsc           = 1;    // no wait state in needed
+    wcr1.wbed           = 1;    // BE is disabled
+    wcr1.wal            = 0;    // clear ~LBA when needed
+
+    wcr2.wbcdd          = 0;    // write clock division is not needed
+    wcr2.reserved_31_1  = 0;    // must be 0
+
+    wcr.bcm             = 0;    // clock is only active during access
+    //wcr.gbcd          = x;    // don't care when BCM=0
+    wcr.inten           = 0;    // interrupt is not used
+    //wcr.intpol        = x;    // don't care when interrupt is not used
+    wcr.wdog_en         = 1;    // watchdog is enabled
+    wcr.wdog_limit      = 00;   // timeout is 128 BCLK cycles
+    wcr.reserved_3      = 0;    // must be 0
+    wcr.reserved_7_6    = 0;    // must be 0
+    wcr.reserved_31_11  = 0;    // must be 0
+
+    wiar.ips_req        = 0;    // IPS not needed
+    wiar.ips_ack        = 0;    // IPS not needed
+    //wiar.irq          = x;    // don't touch
+    //wiar.errst        = x;    // don't touch
+    wiar.aclk_en        = 1;    // clock is enabled
+    wiar.reserved_31_5  = 0;    // must be 0
+
+    //ear.error_addr    = x;    // read-only
+
+    // write modified registers
+    eim_write_32(EIM_CS0GCR1,   (uint32_t *)&gcr1);
+    eim_write_32(EIM_CS0GCR2,   (uint32_t *)&gcr2);
+    eim_write_32(EIM_CS0RCR1,   (uint32_t *)&rcr1);
+    eim_write_32(EIM_CS0RCR2,   (uint32_t *)&rcr2);
+    eim_write_32(EIM_CS0WCR1,   (uint32_t *)&wcr1);
+    eim_write_32(EIM_CS0WCR2,   (uint32_t *)&wcr2);
+    eim_write_32(EIM_WCR,               (uint32_t *)&wcr);
+    eim_write_32(EIM_WIAR,      (uint32_t *)&wiar);
+/*  eim_write_32(EIM_EAR,       (uint32_t *)&ear);*/
+}
+
+
+//------------------------------------------------------------------------------
+// Write a 32-bit word to EIM.
+// If EIM is not set up correctly, this will abort with a bus error.
+//------------------------------------------------------------------------------
+void eim_write_32(off_t offset, uint32_t *pvalue)
+{
+    // calculate memory offset
+    uint32_t *ptr = (uint32_t *)_eim_calc_offset(offset);
+
+    // write data to memory
+    memcpy(ptr, pvalue, sizeof(uint32_t));
+}
+
+//------------------------------------------------------------------------------
+// Read a 32-bit word from EIM.
+// If EIM is not set up correctly, this will abort with a bus error.
+//------------------------------------------------------------------------------
+void eim_read_32(off_t offset, uint32_t *pvalue)
+{
+    // calculate memory offset
+    uint32_t *ptr = (uint32_t *)_eim_calc_offset(offset);
+
+    // read data from memory
+    memcpy(pvalue, ptr, sizeof(uint32_t));
+}
+
+
+//------------------------------------------------------------------------------
+// Calculate an offset into the currently-mapped EIM page.
+//------------------------------------------------------------------------------
+static off_t _eim_calc_offset(off_t offset)
+{
+    // make sure that memory is mapped
+    if (mem_map_ptr == MAP_FAILED)
+        _eim_remap_mem(offset);
+
+    // calculate starting and ending addresses of currently mapped page
+    off_t offset_low    = mem_base_addr;
+    off_t offset_high   = mem_base_addr + (mem_page_size - 1);
+
+    // check that offset is in currently mapped page, remap new page otherwise
+    if ((offset < offset_low) || (offset > offset_high))
+        _eim_remap_mem(offset);
+
+    // calculate pointer
+    return (off_t)mem_map_ptr + (offset - mem_base_addr);
+}
+
+
+//------------------------------------------------------------------------------
+// Map in a new EIM page.
+//------------------------------------------------------------------------------
+static void _eim_remap_mem(off_t offset)
+{
+    // unmap old memory page if needed
+    if (mem_map_ptr != MAP_FAILED) {
+        if (munmap(mem_map_ptr, mem_page_size) != 0) {
+            fprintf(stderr, "ERROR: munmap() failed.\n");
+            exit(EXIT_FAILURE);
+        }
+    }
+
+    // calculate starting address of new page
+    while (offset % mem_page_size)
+        offset--;
+
+    // try to map new memory page
+    mem_map_ptr = mmap(NULL, mem_page_size, PROT_READ | PROT_WRITE, MAP_SHARED,
+                       mem_dev_fd, offset);
+    if (mem_map_ptr == MAP_FAILED) {
+        fprintf(stderr, "ERROR: mmap() failed.\n");
+        exit(EXIT_FAILURE);
+    }
+
+    // save last mapped page address
+    mem_base_addr = offset;
+}
+
+
+//------------------------------------------------------------------------------
+// End-of-File
+//------------------------------------------------------------------------------
diff --git a/novena-eim.h b/novena-eim.h
new file mode 100644
index 0000000..dcceaf4
--- /dev/null
+++ b/novena-eim.h
@@ -0,0 +1,53 @@
+/*
+ * novena-eim.h
+ * ------------
+ * This module contains the userland magic to set up and use the EIM bus.
+ *
+ *
+ * Author: Pavel Shatov
+ * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * - Redistributions of source code must retain the above copyright notice,
+ *   this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ *
+ * - Neither the name of the NORDUnet nor the names of its contributors may
+ *   be used to endorse or promote products derived from this software
+ *   without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#define EIM_BASE_ADDR 0x08000000
+
+/* Set up EIM bus.
+ * Returns 0 on success, -1 on failure.
+ */
+int  eim_setup(void);
+
+/* Write a 32-bit word to EIM.
+ * If EIM is not set up correctly, this will abort with a bus error.
+ */
+void eim_write_32(off_t, uint32_t *);
+
+/* Read a 32-bit word from EIM.
+ * If EIM is not set up correctly, this will abort with a bus error.
+ */
+void eim_read_32(off_t, uint32_t *);



More information about the Commits mailing list