[Cryptech-Commits] [core/rng/trng] 01/01: Adding initial version of testbench for the csprng fifo.
git at cryptech.is
git at cryptech.is
Wed Apr 1 11:44:13 UTC 2015
This is an automated email from the git hooks/post-receive script.
joachim at secworks.se pushed a commit to branch master
in repository core/rng/trng.
commit 433fdc3ffb2c61d262ba870dd9cc2c397506f72c
Author: Joachim Strömbergson <joachim at secworks.se>
Date: Wed Apr 1 13:44:05 2015 +0200
Adding initial version of testbench for the csprng fifo.
---
src/tb/tb_csprng_fifo.v | 312 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 312 insertions(+)
diff --git a/src/tb/tb_csprng_fifo.v b/src/tb/tb_csprng_fifo.v
new file mode 100644
index 0000000..c0b45ec
--- /dev/null
+++ b/src/tb/tb_csprng_fifo.v
@@ -0,0 +1,312 @@
+//======================================================================
+//
+// tb_csprng_fifo.v
+// ----------------
+// Testbench for the csprng output fifo module in the Crytech trng.
+//
+//
+// Author: Joachim Strombergson
+// Copyright (c) 2015, NORDUnet A/S
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or
+// without modification, are permitted provided that the following
+// conditions are met:
+//
+// 1. Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//
+// 2. Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in
+// the documentation and/or other materials provided with the
+// distribution.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+//======================================================================
+
+//------------------------------------------------------------------
+// Simulator directives.
+//------------------------------------------------------------------
+`timescale 1ns/100ps
+
+
+//------------------------------------------------------------------
+// Test module.
+//------------------------------------------------------------------
+module tb_csprng_fifo();
+
+ //----------------------------------------------------------------
+ // Internal constant and parameter definitions.
+ //----------------------------------------------------------------
+ parameter DEBUG = 1;
+
+ parameter CLK_HALF_PERIOD = 1;
+ parameter CLK_PERIOD = 2 * CLK_HALF_PERIOD;
+
+
+ //----------------------------------------------------------------
+ // Register and Wire declarations.
+ //----------------------------------------------------------------
+ reg [31 : 0] cycle_ctr;
+ reg [31 : 0] error_ctr;
+ reg [31 : 0] tc_ctr;
+
+ reg tb_clk;
+ reg tb_reset_n;
+
+ reg tb_cs;
+ reg tb_we;
+ reg [7 : 0] tb_address;
+ reg [31 : 0] tb_write_data;
+ wire [31 : 0] tb_read_data;
+ wire tb_error;
+
+ reg [511 : 0] tb_csprng_data;
+ reg tb_csprng_data_valid;
+ reg tb_discard;
+ wire tb_more_data;
+ wire tb_rnd_syn;
+ wire [31 : 0] tb_rnd_data;
+ reg tb_rnd_ack;
+
+ reg tb_discard;
+ reg tb_test_mode;
+
+ wire tb_ready;
+ wire tb_more_seed;
+ wire tb_security_error;
+ reg tb_seed_syn;
+ reg [511 : 0] tb_seed_data;
+ wire tb_seed_ack;
+ wire [31: 0] tb_rnd_data;
+ wire tb_rnd_syn;
+ reg tb_rnd_ack;
+
+ wire [7 : 0] tb_debug;
+ reg tb_debug_update;
+
+ reg [31 : 0] read_data;
+
+
+ //----------------------------------------------------------------
+ // Device Under Test.
+ //----------------------------------------------------------------
+ trng_csprng dut(
+ .clk(tb_clk),
+ .reset_n(tb_reset_n),
+
+ .csprng_data(tb_csprng_data),
+ .csprng_data_valid(tb_csprng_data_valid),
+ .discard(tb_discard),
+ .more_data(tb_more_data),
+
+ .rnd_syn(tb_rnd_syn),
+ .rnd_data(tb_rnd_data),
+ .rnd_ack(tb_rnd_ack)
+ );
+
+
+ //----------------------------------------------------------------
+ // clk_gen
+ //
+ // Always running clock generator process.
+ //----------------------------------------------------------------
+ always
+ begin : clk_gen
+ #CLK_HALF_PERIOD;
+ tb_clk = !tb_clk;
+ end // clk_gen
+
+
+ //----------------------------------------------------------------
+ // sys_monitor()
+ //
+ // An always running process that creates a cycle counter and
+ // conditionally displays information about the DUT.
+ //----------------------------------------------------------------
+ always
+ begin : sys_monitor
+ cycle_ctr = cycle_ctr + 1;
+
+ #(CLK_PERIOD);
+
+ if (DEBUG)
+ begin
+ dump_dut_state();
+ end
+ end
+
+
+ //----------------------------------------------------------------
+ // dump_dut_state()
+ //
+ // Dump the state of the dump when needed.
+ //----------------------------------------------------------------
+ task dump_dut_state();
+ begin
+ $display("cycle: 0x%016x", cycle_ctr);
+ $display("State of DUT");
+ $display("------------");
+ $display("");
+ end
+ endtask // dump_dut_state
+
+
+ //----------------------------------------------------------------
+ // write_word()
+ //
+ // Write the given word to the DUT using the DUT interface.
+ //----------------------------------------------------------------
+ task write_word(input [11 : 0] address,
+ input [31 : 0] word);
+ begin
+ if (DEBUG)
+ begin
+ $display("*** Writing 0x%08x to 0x%02x.", word, address);
+ $display("");
+ end
+
+ tb_address = address;
+ tb_write_data = word;
+ tb_cs = 1;
+ tb_we = 1;
+ #(2 * CLK_PERIOD);
+ tb_cs = 0;
+ tb_we = 0;
+ end
+ endtask // write_word
+
+
+ //----------------------------------------------------------------
+ // read_word()
+ //
+ // Read a data word from the given address in the DUT.
+ // the word read will be available in the global variable
+ // read_data.
+ //----------------------------------------------------------------
+ task read_word(input [11 : 0] address);
+ begin
+ tb_address = address;
+ tb_cs = 1;
+ tb_we = 0;
+ #(CLK_PERIOD);
+ read_data = tb_read_data;
+ tb_cs = 0;
+
+ if (DEBUG)
+ begin
+ $display("*** Reading 0x%08x from 0x%02x.", read_data, address);
+ $display("");
+ end
+ end
+ endtask // read_word
+
+
+ //----------------------------------------------------------------
+ // reset_dut()
+ //
+ // Toggle reset to put the DUT into a well known state.
+ //----------------------------------------------------------------
+ task reset_dut();
+ begin
+ $display("*** Toggle reset.");
+ tb_reset_n = 0;
+
+ #(2 * CLK_PERIOD);
+ tb_reset_n = 1;
+ $display("");
+ end
+ endtask // reset_dut
+
+
+ //----------------------------------------------------------------
+ // display_test_results()
+ //
+ // Display the accumulated test results.
+ //----------------------------------------------------------------
+ task display_test_results();
+ begin
+ if (error_ctr == 0)
+ begin
+ $display("*** All %02d test cases completed successfully", tc_ctr);
+ end
+ else
+ begin
+ $display("*** %02d tests completed - %02d test cases did not complete successfully.",
+ tc_ctr, error_ctr);
+ end
+ end
+ endtask // display_test_results
+
+
+ //----------------------------------------------------------------
+ // init_sim()
+ //
+ // Initialize all counters and testbed functionality as well
+ // as setting the DUT inputs to defined values.
+ //----------------------------------------------------------------
+ task init_sim();
+ begin
+ cycle_ctr = 0;
+ error_ctr = 0;
+ tc_ctr = 0;
+
+ tb_clk = 0;
+ tb_reset_n = 1;
+
+ tb_cs = 0;
+ tb_we = 0;
+ tb_address = 8'h00;
+ tb_write_data = 32'h00000000;
+
+ tb_discard = 0;
+ tb_test_mode = 0;
+
+ tb_seed_syn = 0;
+ tb_seed_data = {16{32'h00000000}};
+ tb_rnd_ack = 0;
+ tb_debug_update = 0;
+ end
+ endtask // init_sim
+
+
+ //----------------------------------------------------------------
+ // csprng_test
+ //
+ // The main test functionality.
+ //----------------------------------------------------------------
+ initial
+ begin : csprng_fifo_test
+
+ $display(" -= Testbench for csprng fifo started =-");
+ $display(" ======================================");
+ $display("");
+
+ init_sim();
+ dump_dut_state();
+ reset_dut();
+ dump_dut_state();
+
+ display_test_results();
+
+ $display("");
+ $display("*** CSPRNG FIFO simulation done. ***");
+ $finish;
+ end // tb_csprng_fifo_test
+endmodule // tb_csprng_fifo
+
+//======================================================================
+// EOF tb_csprng_fifo.v
+//======================================================================
More information about the Commits
mailing list