[Cryptech-Commits] [core/sha1] 01/01: Changed to asynch reset.
git at cryptech.is
git at cryptech.is
Fri Nov 7 10:53:35 UTC 2014
This is an automated email from the git hooks/post-receive script.
joachim at secworks.se pushed a commit to branch master
in repository core/sha1.
commit 7aa19d15db9ce95e74cd687eeae5f8859ed86826
Author: Joachim Strömbergson <joachim at secworks.se>
Date: Fri Nov 7 11:53:30 2014 +0100
Changed to asynch reset.
---
src/rtl/sha1.v | 106 +++++++++++++++++++++++++--------------------------
src/rtl/sha1_core.v | 6 +--
src/rtl/sha1_w_mem.v | 6 +--
3 files changed, 59 insertions(+), 59 deletions(-)
diff --git a/src/rtl/sha1.v b/src/rtl/sha1.v
index d4ed620..8743fe6 100644
--- a/src/rtl/sha1.v
+++ b/src/rtl/sha1.v
@@ -9,30 +9,30 @@
// Author: Joachim Strombergson
// Copyright (c) 2014, SUNET
// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or
-// without modification, are permitted provided that the following
-// conditions are met:
-//
-// 1. Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//
-// 2. Redistributions in binary form must reproduce the above copyright
-// notice, this list of conditions and the following disclaimer in
-// the documentation and/or other materials provided with the
-// distribution.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+//
+// Redistribution and use in source and binary forms, with or
+// without modification, are permitted provided that the following
+// conditions are met:
+//
+// 1. Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//
+// 2. Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in
+// the documentation and/or other materials provided with the
+// distribution.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================
@@ -41,11 +41,11 @@ module sha1(
// Clock and reset.
input wire clk,
input wire reset_n,
-
+
// Control.
input wire cs,
input wire we,
-
+
// Data ports.
input wire [7 : 0] address,
input wire [31 : 0] write_data,
@@ -67,7 +67,7 @@ module sha1(
parameter ADDR_STATUS = 8'h09;
parameter STATUS_READY_BIT = 0;
parameter STATUS_VALID_BIT = 1;
-
+
parameter ADDR_BLOCK0 = 8'h10;
parameter ADDR_BLOCK1 = 8'h11;
parameter ADDR_BLOCK2 = 8'h12;
@@ -84,7 +84,7 @@ module sha1(
parameter ADDR_BLOCK13 = 8'h1d;
parameter ADDR_BLOCK14 = 8'h1e;
parameter ADDR_BLOCK15 = 8'h1f;
-
+
parameter ADDR_DIGEST0 = 8'h20;
parameter ADDR_DIGEST1 = 8'h21;
parameter ADDR_DIGEST2 = 8'h22;
@@ -95,7 +95,7 @@ module sha1(
parameter CORE_NAME1 = 32'h20202020; // " "
parameter CORE_VERSION = 32'h302e3530; // "0.50"
-
+
//----------------------------------------------------------------
// Registers including update variables and write enable.
//----------------------------------------------------------------
@@ -108,7 +108,7 @@ module sha1(
reg next_new;
reg next_we;
reg next_set;
-
+
reg ready_reg;
reg [31 : 0] block0_reg;
@@ -148,7 +148,7 @@ module sha1(
reg digest_valid_reg;
-
+
//----------------------------------------------------------------
// Wires.
//----------------------------------------------------------------
@@ -161,8 +161,8 @@ module sha1(
reg [31 : 0] tmp_read_data;
reg tmp_error;
-
-
+
+
//----------------------------------------------------------------
// Concurrent connectivity for ports etc.
//----------------------------------------------------------------
@@ -177,34 +177,34 @@ module sha1(
assign read_data = tmp_read_data;
assign error = tmp_error;
-
-
+
+
//----------------------------------------------------------------
// core instantiation.
//----------------------------------------------------------------
sha1_core core(
.clk(clk),
.reset_n(reset_n),
-
+
.init(core_init),
.next(core_next),
-
+
.block(core_block),
-
+
.ready(core_ready),
-
+
.digest(core_digest),
.digest_valid(core_digest_valid)
);
-
-
+
+
//----------------------------------------------------------------
// reg_update
// Update functionality for all registers in the core.
- // All registers are positive edge triggered with synchronous
- // active low reset. All registers have write enable.
+ // All registers are positive edge triggered with
+ // asynchronous active low reset.
//----------------------------------------------------------------
- always @ (posedge clk)
+ always @ (posedge clk or negedge reset_n)
begin
if (!reset_n)
begin
@@ -244,7 +244,7 @@ module sha1(
begin
next_reg <= next_new;
end
-
+
if (core_digest_valid)
begin
digest_reg <= core_digest;
@@ -329,7 +329,7 @@ module sha1(
begin
block15_reg <= write_data;
end
-
+
end
end // reg_update
@@ -369,7 +369,7 @@ module sha1(
end
end
-
+
//----------------------------------------------------------------
// api
//
@@ -397,7 +397,7 @@ module sha1(
block15_we = 0;
tmp_read_data = 32'h00000000;
tmp_error = 0;
-
+
if (cs)
begin
if (we)
@@ -409,7 +409,7 @@ module sha1(
init_set = write_data[CTRL_INIT_BIT];
next_set = write_data[CTRL_NEXT_BIT];
end
-
+
ADDR_BLOCK0:
begin
block0_we = 1;
@@ -489,7 +489,7 @@ module sha1(
begin
block15_we = 1;
end
-
+
default:
begin
tmp_error = 1;
@@ -505,7 +505,7 @@ module sha1(
begin
tmp_read_data = CORE_NAME0;
end
-
+
ADDR_NAME1:
begin
tmp_read_data = CORE_NAME1;
@@ -520,12 +520,12 @@ module sha1(
begin
tmp_read_data = {28'h0000000, 2'b00, next_reg, init_reg};
end
-
+
ADDR_STATUS:
begin
tmp_read_data = {28'h0000000, 2'b00, digest_valid_reg, ready_reg};
end
-
+
ADDR_BLOCK0:
begin
tmp_read_data = block0_reg;
@@ -630,7 +630,7 @@ module sha1(
begin
tmp_read_data = digest_reg[31 : 0];
end
-
+
default:
begin
tmp_error = 1;
diff --git a/src/rtl/sha1_core.v b/src/rtl/sha1_core.v
index f38d42f..6c026da 100644
--- a/src/rtl/sha1_core.v
+++ b/src/rtl/sha1_core.v
@@ -151,10 +151,10 @@ module sha1_core(
//----------------------------------------------------------------
// reg_update
// Update functionality for all registers in the core.
- // All registers are positive edge triggered with synchronous
- // active low reset. All registers have write enable.
+ // All registers are positive edge triggered with
+ // asynchronous active low reset.
//----------------------------------------------------------------
- always @ (posedge clk)
+ always @ (posedge clk or negedge reset_n)
begin : reg_update
if (!reset_n)
begin
diff --git a/src/rtl/sha1_w_mem.v b/src/rtl/sha1_w_mem.v
index c91a535..cafb35c 100644
--- a/src/rtl/sha1_w_mem.v
+++ b/src/rtl/sha1_w_mem.v
@@ -109,10 +109,10 @@ module sha1_w_mem(
// reg_update
//
// Update functionality for all registers in the core.
- // All registers are positive edge triggered with synchronous
- // active low reset. All registers have write enable.
+ // All registers are positive edge triggered with
+ // asynchronous active low reset.
//----------------------------------------------------------------
- always @ (posedge clk)
+ always @ (posedge clk or negedge reset_n)
begin : reg_update
if (!reset_n)
begin
More information about the Commits
mailing list