[Cryptech-Commits] [test/coretest_bp_entropy] 01/01: Adding Python code to extract data from the bp entropy source. Note: Not tested yet.

[git at cryptech.is]

This is an automated email from the git hooks/post-receive script.

joachim at secworks.se pushed a commit to branch master
in repository test/coretest_bp_entropy.

commit 42a1d0d74e7da2c4502e57fc979a16d9a0206029
Author: Joachim Strömbergson <joachim at secworks.se>
Date:   Sat May 24 21:46:55 2014 +0200

    Adding Python code to extract data from the bp entropy source. Note: Not tested yet.
---
 src/sw/entropy_tester.py | 279 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 279 insertions(+)

diff --git a/src/sw/entropy_tester.py b/src/sw/entropy_tester.py
new file mode 100755
index 0000000..1b0e19d
--- /dev/null
+++ b/src/sw/entropy_tester.py
@@ -0,0 +1,279 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+#=======================================================================
+#
+# entropy_tester.py
+# -----------------
+# Test SW for the FPGA entropy tester project.
+#
+# Note: This program requires the PySerial module.
+# http://pyserial.sourceforge.net/
+#
+# 
+# Author: Joachim Strömbergson
+# Copyright (c) 2014, Secworks Sweden AB
+# 
+# Redistribution and use in source and binary forms, with or 
+# without modification, are permitted provided that the following 
+# conditions are met: 
+# 
+# 1. Redistributions of source code must retain the above copyright 
+#    notice, this list of conditions and the following disclaimer. 
+# 
+# 2. Redistributions in binary form must reproduce the above copyright 
+#    notice, this list of conditions and the following disclaimer in 
+#    the documentation and/or other materials provided with the 
+#    distribution. 
+# 
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#=======================================================================
+ 
+#-------------------------------------------------------------------
+# Python module imports.
+#-------------------------------------------------------------------
+import sys
+import serial
+import os
+import time
+import threading
+
+ 
+#-------------------------------------------------------------------
+# Defines.
+#-------------------------------------------------------------------
+# Serial port defines.
+# CONFIGURE YOUR DEVICE HERE!
+SERIAL_DEVICE = '/dev/cu.usbserial-A801SA6T'
+BAUD_RATE = 9600
+BIT_RATE  = int(50E6 / BAUD_RATE)
+
+BAUD_RATE2 = 256000
+BIT_RATE2  = int(50E6 / BAUD_RATE2)
+
+DATA_BITS = 8
+STOP_BITS = 1
+
+# Delay times.
+PROC_DELAY_TIME = 0.001
+COMM_DELAY_TIME = 0.01
+
+
+# Verbose operation on/off
+VERBOSE = False
+
+# Memory map.
+SOC                   = '\x55'
+EOC                   = '\xaa'
+READ_CMD              = '\x10'
+WRITE_CMD             = '\x11'
+
+UART_ADDR_PREFIX      = '\x00'
+UART_ADDR_BIT_RATE    = '\x10'
+UART_ADDR_DATA_BITS   = '\x11'
+UART_ADDR_STOP_BITS   = '\x12'
+
+BPENT_ADDR_PREFIX       = '\x10'
+BPENT_ADDR_WR_RNG1      = '\x00'
+BPENT_ADDR_WR_RNG2      = '\x01'
+BPENT_ADDR_RD_RNG1_RNG2 = '\x10'
+BPENT_ADDR_RD_P         = '\x11'
+BPENT_ADDR_RD_N         = '\x12'
+
+
+#-------------------------------------------------------------------
+# print_response()
+#
+# Parses a received buffer and prints the response.
+#-------------------------------------------------------------------
+def print_response(buffer):
+    if VERBOSE:
+        print "Length of response: %d" % len(buffer)
+        if buffer[0] == '\xaa':
+            print "Response contains correct Start of Response (SOR)"
+        if buffer[-1] == '\x55':
+            print "Response contains correct End of Response (EOR)"
+
+    response_code = ord(buffer[1])
+
+    if response_code == 0xfe:
+        print "UNKNOWN response code received."
+
+    elif response_code == 0xfd:
+        print "ERROR response code received."
+
+    elif response_code == 0x7f:
+        read_addr = ord(buffer[2]) * 256 + ord(buffer[3])
+        read_data = (ord(buffer[4]) * 16777216) + (ord(buffer[5]) * 65536) +\
+                    (ord(buffer[6]) * 256) + ord(buffer[7])
+        print "READ_OK. address 0x%02x = 0x%08x." % (read_addr, read_data)
+
+    elif response_code == 0x7e:
+        read_addr = ord(buffer[2]) * 256 + ord(buffer[3])
+        print "WRITE_OK. address 0x%02x." % (read_addr)
+
+    elif response_code == 0x7d:
+        print "RESET_OK."
+
+    else:
+        print "Response 0x%02x is unknown." % response_code
+        print buffer
+        
+
+#-------------------------------------------------------------------
+# read_serial_thread()
+#
+# Function used in a thread to read from the serial port and
+# collect response from coretest.
+#-------------------------------------------------------------------
+def read_serial_thread(serialport):
+    if VERBOSE:
+        print "Serial port response thread started. Waiting for response..."
+        
+    buffer = []
+    while True:
+        if serialport.isOpen():
+            response = serialport.read()
+            buffer.append(response)
+            if ((response == '\x55') and len(buffer) > 7):
+                print_response(buffer)
+                buffer = []
+        else:
+            print "No open device yet."
+            time.sleep(COMM_DELAY_TIME)
+            
+
+#-------------------------------------------------------------------
+# write_serial_bytes()
+#
+# Send the bytes in the buffer to coretest over the serial port.
+#-------------------------------------------------------------------
+def write_serial_bytes(tx_cmd, serialport):
+    if VERBOSE:
+        print "Command to be sent:", tx_cmd
+    
+    for tx_byte in tx_cmd:
+        serialport.write(tx_byte)
+
+    # Allow the device to complete the transaction.
+    time.sleep(COMM_DELAY_TIME)
+
+
+#-------------------------------------------------------------------
+# read_word()
+#-------------------------------------------------------------------
+def read_word(prefix, addr, ser):
+    cmd = [SOC, READ_CMD] + [prefix, addr] +  [EOC]
+    write_serial_bytes(cmd , ser)
+
+
+#-------------------------------------------------------------------
+# read_rng1_rng2()
+#-------------------------------------------------------------------
+def read_rng1_rng2(ser):
+    for i in range(3):
+        read_word(BPENT_ADDR_PREFIX, BPENT_ADDR_RD_RNG1_RNG2, ser)
+
+
+#-------------------------------------------------------------------
+# read_n_data()
+#-------------------------------------------------------------------
+def read_n_data(ser):
+    for i in range(10):
+        read_word(BPENT_ADDR_PREFIX, BPENT_ADDR_RD_N, ser)
+
+
+#-------------------------------------------------------------------
+# read_p_data()
+#-------------------------------------------------------------------
+def read_p_data(ser):
+    for i in range(10):
+        read_word(BPENT_ADDR_PREFIX, BPENT_ADDR_RD_P, ser)
+
+
+#-------------------------------------------------------------------
+# main()
+#
+# Parse any arguments and run the tests.
+#-------------------------------------------------------------------
+def main():
+    # Open device
+    ser = serial.Serial()
+    ser.port=SERIAL_DEVICE
+    ser.baudrate=BAUD_RATE
+    ser.bytesize=DATA_BITS
+    ser.parity='N'
+    ser.stopbits=STOP_BITS
+    ser.timeout=1
+    ser.writeTimeout=0
+
+    if VERBOSE:
+        print "Setting up a serial port and starting a receive thread."
+
+    try:
+        ser.open()
+    except:
+        print "Error: Can't open serial device."
+        sys.exit(1)
+
+    # Try and switch baud rate in the FPGA and then here.
+#    bit_rate_high = chr((BIT_RATE2 >> 8) & 0xff)
+#    bit_rate_low = chr(BIT_RATE2 & 0xff)
+#
+#    if VERBOSE:
+#        print("Changing to new baud rate.")
+#        print("Baud rate: %d" % BAUD_RATE2)
+#        print("Bit rate high byte: 0x%02x" % ord(bit_rate_high))
+#        print("Bit rate low byte:  0x%02x" % ord(bit_rate_low))
+#
+#    write_serial_bytes([SOC, WRITE_CMD, UART_ADDR_PREFIX, UART_ADDR_BIT_RATE,
+#                        '\x00', '\x00', bit_rate_high, bit_rate_low, EOC], ser)
+#    ser.baudrate=BAUD_RATE2
+
+    try:
+        my_thread = threading.Thread(target=read_serial_thread, args=(ser,))
+    except:
+        print "Error: Can't start thread."
+        sys.exit()
+        
+    my_thread.daemon = True
+    my_thread.start()
+
+
+    # Perform RNG read ops.
+    read_rng1_rng2(ser)
+    read_n_data(ser)
+    read_p_data(ser)
+
+
+    # Exit nicely.
+    time.sleep(50 * COMM_DELAY_TIME)
+    if VERBOSE:
+        print "Done. Closing device."
+    ser.close()
+
+
+#-------------------------------------------------------------------
+# __name__
+# Python thingy which allows the file to be run standalone as
+# well as parsed from within a Python interpreter.
+#-------------------------------------------------------------------
+if __name__=="__main__": 
+    # Run the main function.
+    sys.exit(main())
+
+
+#=======================================================================
+# EOF hash_tester.py
+#=======================================================================