[Cryptech-Commits] [test/novena_trng] 01/01: Adding top level module.
git at cryptech.is
git at cryptech.is
Wed Dec 3 16:54:07 UTC 2014
This is an automated email from the git hooks/post-receive script.
joachim at secworks.se pushed a commit to branch master
in repository test/novena_trng.
commit 7e327732cf14d8f9a260aa87912de97d0ee88d22
Author: Joachim Strömbergson <joachim at secworks.se>
Date: Wed Dec 3 17:54:03 2014 +0100
Adding top level module.
---
src/rtl/novena_trng.v | 217 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 217 insertions(+)
diff --git a/src/rtl/novena_trng.v b/src/rtl/novena_trng.v
new file mode 100644
index 0000000..9d722b6
--- /dev/null
+++ b/src/rtl/novena_trng.v
@@ -0,0 +1,217 @@
+//======================================================================
+//
+// novena_trng.v
+// -------------
+// Cryptech TRNG for the Novena platform.
+// This top level file is based on the novena_fpga design by
+// Andrew "bunnie" Huang, see below.
+//
+// Author: Joachim Strombergson
+// Copyright (c) 2014, SUNET
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or
+// without modification, are permitted provided that the following
+// conditions are met:
+//
+// 1. Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//
+// 2. Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in
+// the documentation and/or other materials provided with the
+// distribution.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// Copyright (c) 2013, Andrew "bunnie" Huang
+//
+// See the NOTICE file distributed with this work for additional
+// information regarding copyright ownership. The copyright holder
+// licenses this file to you under the Apache License, Version 2.0
+// (the "License"); you may not use this file except in compliance
+// with the License. You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// code distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied. See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//////////////////////////////////////////////////////////////////////////////
+
+/// note: must set "-g UnusedPin:Pullnone" to avoid conflicts with unused pins
+
+`timescale 1ns / 1ps
+
+module novena_trng(
+ // CPU side mapping
+ input wire [15:0] EIM_DA,
+ output reg EIM_A16, // relay of the trigger output
+ output reg EIM_A17, // relay of the trigger data (read path)
+
+ // connector side mapping
+ //input wire F_LVDS_N3, // output of trigger
+ //input wire F_DX2, // output of trigger
+ //output wire F_LVDS_N5, // trigger reset
+ output wire F_LVDS_P4, // trigger reset
+ //inout wire F_LVDS_P5, // trigger data (bidir)
+ //input wire F_DX18, // trigger data in from sticker (DUT->CPU)
+ output wire F_LVDS_P11, // trigger data out to sticker (CPU->DUT)
+ //output wire F_LVDS_N8, // trigger clock
+ //output wire F_DX14, // trigger clock
+
+ output wire F_LVDS_N7, // drive TPI data line
+ output wire F_LVDS_P7, // drive TPI signal lines
+
+ output wire F_DX15, // 1 = drive 5V, 0 = drive 3V to DUT
+
+ output wire F_LVDS_CK1_N,
+ output wire F_LVDS_CK1_P,
+ output wire F_LVDS_N11,
+
+ output wire F_LVDS_N0,
+ output wire F_LVDS_P0,
+ // output wire F_DX1,
+
+ output wire F_LVDS_N15,
+ output wire F_LVDS_P15,
+ output wire F_LVDS_NC,
+
+ //input wire F_DX11,
+
+ // Noise input ports.
+ // DX3 is for rev01 of the noise board
+ // DX7 is used for rev02 of the noise board
+ // DX15 is used fpr rev02 as non-schmitt triggered source
+ // input wire F_DX3,
+ input wire F_DX7,
+
+ // Cryptech noise board v2 LEDs 00..07
+ // are connected to these pins.
+ output wire F_DX0,
+ output wire F_DX3,
+ output wire F_DX2,
+ output wire F_DX11,
+ output wire F_DX1,
+ output wire F_DX17,
+ output wire F_DX14,
+ output wire F_DX18,
+
+ input wire CLK2_N,
+ input wire CLK2_P,
+ output wire FPGA_LED2,
+
+ input wire I2C3_SCL,
+ inout wire I2C3_SDA,
+
+ input wire RESETBMCU,
+ // output wire F_DX17, // dummy
+ output wire APOPTOSIS
+ );
+
+
+ //----------------------------------------------------------------
+ // Wires.
+ //----------------------------------------------------------------
+ wire clk;
+
+ wire [7 : 0] test_debug;
+
+ IBUFGDS clkibufgds(
+ .I(CLK2_P),
+ .IB(CLK2_N),
+ .O(clk)
+ );
+
+ //----------------------------------------------------------------
+ // Assignments.
+ //----------------------------------------------------------------
+ assign FPGA_LED2 = test_debug[0];
+
+ // Assign LEDs to debug
+ assign F_DX0 = test_debug[0];
+ assign F_DX3 = test_debug[1];
+ assign F_DX2 = test_debug[2];
+ assign F_DX11 = test_debug[3];
+ assign F_DX1 = test_debug[4];
+ assign F_DX17 = test_debug[5];
+ assign F_DX14 = test_debug[6];
+ assign F_DX18 = test_debug[7];
+
+ assign APOPTOSIS = 1'b0;
+ assign F_DX15 = 1'b1; //+5V P_DUT
+
+ // OE on bank to drive signals; signal not inverted in software
+ assign F_LVDS_P7 = !EIM_DA[3];
+ // OE on bank to drive the data; signal not inverted in software
+ assign F_LVDS_N7 = !EIM_DA[4];
+ assign F_LVDS_P4 = 1'b0;
+ assign F_LVDS_P11 = 1'b0;
+ assign F_LVDS_CK1_N = 1'b0;
+ assign F_LVDS_CK1_P = 1'b0;
+ assign F_LVDS_N11 = 1'b0;
+ assign F_LVDS_N0 = 1'b0;
+ assign F_LVDS_P0 = 1'b0;
+ // assign F_DX1 = 1'b0;
+ assign F_LVDS_N15 = 1'b0;
+ assign F_LVDS_P15 = 1'b0;
+ assign F_LVDS_NC = 1'b0;
+
+
+ ////////////////////////////////////
+ ///// I2C register set
+ ////////////////////////////////////
+ wire SDA_pd;
+ wire SDA_int;
+ reg clk25;
+
+ initial begin
+ clk25 <= 1'b0;
+ end
+
+ always @ (posedge clk) begin
+ clk25 <= ~clk25;
+ EIM_A16 <= 1'b0;
+ EIM_A17 <= 1'b0;
+ end
+
+ IOBUF #(
+ .DRIVE(8),
+ .SLEW("SLOW")
+ ) IOBUF_sda (
+ .IO(I2C3_SDA),
+ .I(1'b0),
+ .T(!SDA_pd),
+ .O(SDA_int)
+ );
+
+ coretest_trng coretest_trng_inst(
+ .clk(clk25),
+ .reset_n(1'b1),
+
+ .noise(F_DX7),
+ .debug(test_debug),
+ .SCL(I2C3_SCL),
+ .SDA(SDA_int),
+ .SDA_pd(SDA_pd)
+ );
+
+endmodule // novena_trng
+
+//======================================================================
+// EOF novena_trng.v
+//======================================================================
More information about the Commits
mailing list